@matter/types 0.13.0-alpha.0-20250328-6dde053de → 0.13.0-alpha.0-20250330-df5a17eba

package/dist/esm/clusters/thermostat.js

@@ -45,7 +45,7 @@ var Thermostat;
      * If this bit is set, it shall indicate the occupied state else if the bit if not set, it shall indicate the
      * unoccupied state.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.7.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.7.1
      */
     occupied: BitFlag(0)
   };
@@ -115,19 +115,19 @@ var Thermostat;
      * be represented by a 16 bits unsigned integer to designate the minutes since midnight. For example, 6am will
      * be represented by 360 minutes since midnight and 11:30pm will be represented by 1410 minutes since midnight.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.30.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.30.1
      */
     transitionTime: TlvField(0, TlvUInt16.bound({ max: 1439 })),
     /**
      * This field shall represent the heat setpoint to be applied at this associated transition start time.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.30.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.30.2
      */
     heatSetpoint: TlvField(1, TlvNullable(TlvInt16)),
     /**
      * This field shall represent the cool setpoint to be applied at this associated transition start time.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.30.3
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.30.3
      */
     coolSetpoint: TlvField(2, TlvNullable(TlvInt16))
   });
@@ -137,7 +137,7 @@ var Thermostat;
      * device supports more than 10 transitions in its schedule they can send this by sending more than 1 “Set
      * Weekly Schedule” command, each containing the separate information that the device needs to set.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.2.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.2.1
      */
     numberOfTransitionsForSequence: TlvField(0, TlvUInt8),
     /**
@@ -149,7 +149,7 @@ var Thermostat;
      * Each setpoint transition will begin with the day of week for this transition. There can be up to 10
      * transitions for each command.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.2.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.2.2
      */
     dayOfWeekForSequence: TlvField(1, TlvBitmap(TlvUInt8, Thermostat2.ScheduleDayOfWeek)),
     /**
@@ -173,13 +173,13 @@ var Thermostat;
      * Both bits must be respected, even if the HEAT or COOL feature is not supported, to ensure the command is
      * decoded and handled correctly.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.2.3
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.2.3
      */
     modeForSequence: TlvField(2, TlvBitmap(TlvUInt8, Thermostat2.ScheduleMode)),
     /**
      * This field shall contain the list of setpoint transitions used to update the specified daily schedules
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.2.4
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.2.4
      */
     transitions: TlvField(3, TlvArray(Thermostat2.TlvWeeklyScheduleTransition, { maxLength: 10 }))
   });
@@ -188,14 +188,14 @@ var Thermostat;
      * This field shall indicate the number of days the client would like to return the setpoint values for and
      * could be any combination of single days or the entire week.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.3.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.3.1
      */
     daysToReturn: TlvField(0, TlvBitmap(TlvUInt8, Thermostat2.ScheduleDayOfWeek)),
     /**
      * This field shall indicate the mode the client would like to return the set point values for and could be any
      * combination of heat only, cool only or heat & cool.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.3.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.3.2
      */
     modeToReturn: TlvField(1, TlvBitmap(TlvUInt8, Thermostat2.ScheduleMode))
   });
@@ -229,19 +229,19 @@ var Thermostat;
     /**
      * This field shall specify a PresetScenarioEnum value supported by this thermostat.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.29.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.29.1
      */
     presetScenario: TlvField(0, TlvEnum()),
     /**
      * This field shall specify a limit for the number of presets for this PresetScenarioEnum.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.29.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.29.2
      */
     numberOfPresets: TlvField(1, TlvUInt8),
     /**
      * This field shall specify a bitmap of features for this PresetTypeStruct.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.29.3
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.29.3
      */
     presetTypeFeatures: TlvField(2, TlvBitmap(TlvUInt16, Thermostat2.PresetTypeFeatures))
   });
@@ -253,13 +253,13 @@ var Thermostat;
      * This field shall only be null when the encompassing PresetStruct is appended to the Presets attribute for the
      * purpose of creating a new Preset. Refer to Presets for the creation of Preset handles.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.28.1
      */
     presetHandle: TlvField(0, TlvNullable(TlvByteString.bound({ maxLength: 16 }))),
     /**
      * This field shall indicate the associated PresetScenarioEnum value for this preset.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.28.2
      */
     presetScenario: TlvField(1, TlvEnum()),
     /**
@@ -268,28 +268,28 @@ var Thermostat;
      * Within each subset of presets sharing the same PresetScenario field value, there shall NOT be any presets
      * with the same value, including null as a value, in the Name field.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.3
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.28.3
      */
     name: TlvOptionalField(2, TlvNullable(TlvString.bound({ maxLength: 64 }))),
     /**
      * This field shall indicate the cooling setpoint for the preset. Refer to Setpoint Limits for value
      * constraints.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.4
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.28.4
      */
     coolingSetpoint: TlvOptionalField(3, TlvInt16),
     /**
      * This field shall indicate the heating setpoint for the preset. Refer to Setpoint Limits for value
      * constraints.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.5
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.28.5
      */
     heatingSetpoint: TlvOptionalField(4, TlvInt16),
     /**
      * This field shall indicate whether the preset is marked as "built-in", meaning that it can be modified, but it
      * cannot be deleted.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.6
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.28.6
      */
     builtIn: TlvField(5, TlvNullable(TlvBoolean))
   });
@@ -298,7 +298,7 @@ var Thermostat;
      * This field shall specify the value of the PresetHandle field on the PresetStruct to be made active. If the
      * field is set to null, that indicates there should be no active preset.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.9.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.9.1
      */
     presetHandle: TlvField(0, TlvNullable(TlvByteString.bound({ maxLength: 16 })))
   });
@@ -322,7 +322,7 @@ var Thermostat;
      * field on the encompassing ScheduleTypeStruct supports specifying presets on ScheduleTransitionStructs
      * contained in its Transitions field.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.12.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.12.1
      */
     supportsPresets: BitFlag(0),
     /**
@@ -332,7 +332,7 @@ var Thermostat;
      * field on the encompassing ScheduleTypeStruct supports specifying setpoints on ScheduleTransitionStructs
      * contained in its Transitions field.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.12.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.12.2
      */
     supportsSetpoints: BitFlag(1),
     /**
@@ -341,7 +341,7 @@ var Thermostat;
      * This bit shall indicate that any ScheduleStruct with a SystemMode field whose value matches the SystemMode
      * field on the encompassing ScheduleTypeStruct supports setting the value of the Name field.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.12.3
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.12.3
      */
     supportsNames: BitFlag(2),
     /**
@@ -350,7 +350,7 @@ var Thermostat;
      * This bit shall indicate that any ScheduleStruct with a SystemMode field whose value matches the SystemMode
      * field on the encompassing ScheduleTypeStruct supports setting its SystemMode field to Off.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.12.4
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.12.4
      */
     supportsOff: BitFlag(3)
   };
@@ -359,20 +359,20 @@ var Thermostat;
      * This field shall specify a SystemModeEnum supported by this thermostat for Schedules. The only valid values
      * for this field shall be Auto, Heat, and Cool.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.33.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.33.1
      */
     systemMode: TlvField(0, TlvEnum()),
     /**
      * This field shall specify a limit for the number of Schedules for this SystemMode.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.33.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.33.2
      */
     numberOfSchedules: TlvField(1, TlvUInt8),
     /**
      * This field shall specify a bitmap of features for this schedule entry. At least one of SupportsPresets and
      * SupportsSetpoints shall be set.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.33.3
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.33.3
      */
     scheduleTypeFeatures: TlvField(2, TlvBitmap(TlvUInt16, Thermostat2.ScheduleTypeFeatures))
   });
@@ -381,7 +381,7 @@ var Thermostat;
      * This field shall specify a bitmask of days of the week that the transition applies to. The Vacation bit shall
      * NOT be set; vacation schedules shall be set via the vacation preset.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.32.1
      */
     dayOfWeek: TlvField(0, TlvBitmap(TlvUInt8, Thermostat2.ScheduleDayOfWeek)),
     /**
@@ -390,14 +390,14 @@ var Thermostat;
      *
      * Handling of transitions during the changeover of Daylight Saving Time is implementation-dependent.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.32.2
      */
     transitionTime: TlvField(1, TlvUInt16.bound({ max: 1439 })),
     /**
      * This field shall specify the preset used at the TransitionTime. If this field is provided, then the
      * SystemMode, CoolingSetpoint and HeatingSetpoint fields shall NOT be provided.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.3
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.32.3
      */
     presetHandle: TlvOptionalField(2, TlvByteString.bound({ maxLength: 16 })),
     /**
@@ -405,21 +405,21 @@ var Thermostat;
      * default for the schedule. The only valid values for this field shall be Auto, Heat, Cool and Off. This field
      * shall only be included when the required system mode differs from the schedule’s default SystemMode.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.4
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.32.4
      */
     systemMode: TlvOptionalField(3, TlvEnum()),
     /**
      * This field shall specify the cooling setpoint for the transition. If PresetHandle is set, this field shall
      * NOT be included. Refer to Setpoint Limits for value constraints.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.5
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.32.5
      */
     coolingSetpoint: TlvOptionalField(4, TlvInt16),
     /**
      * This field shall specify the cooling setpoint for the transition. If PresetHandle is set, this field shall
      * NOT be included. Refer to Setpoint Limits for value constraints.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.6
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.32.6
      */
     heatingSetpoint: TlvOptionalField(5, TlvInt16)
   });
@@ -431,26 +431,26 @@ var Thermostat;
      * This field shall only be null when the encompassing ScheduleStruct is appended to the Schedules attribute for
      * the purpose of creating a new Schedule. Refer to Schedules for the creation of Schedule handles.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.31.1
      */
     scheduleHandle: TlvField(0, TlvNullable(TlvByteString.bound({ maxLength: 16 }))),
     /**
      * This field shall specify the default thermostat system mode for transitions in this schedule. The only valid
      * values for this field shall be Auto, Heat, and Cool.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.31.2
      */
     systemMode: TlvField(1, TlvEnum()),
     /**
      * This field shall specify a name for the ScheduleStruct.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.3
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.31.3
      */
     name: TlvOptionalField(2, TlvString.bound({ maxLength: 64 })),
     /**
      * This field shall indicate the default PresetHandle value for transitions in this schedule.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.4
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.31.4
      */
     presetHandle: TlvOptionalField(3, TlvByteString.bound({ maxLength: 16 })),
     /**
@@ -481,14 +481,14 @@ var Thermostat;
      * ScheduleTransitionStruct with the largest TransitionTime field from the set of ScheduleTransitionStructs
      * whose DayOfWeek field matches the current day of the week.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.5
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.31.5
      */
     transitions: TlvField(4, TlvArray(Thermostat2.TlvScheduleTransition, { minLength: 1 })),
     /**
      * This field shall indicate whether the schedule is marked as "built-in", meaning that it can be modified, but
      * it cannot be deleted.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.6
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.31.6
      */
     builtIn: TlvField(5, TlvNullable(TlvBoolean))
   });
@@ -496,7 +496,7 @@ var Thermostat;
     /**
      * This field shall specify the value of the ScheduleHandle field on the ScheduleStruct to be made active.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.8.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.8.1
      */
     scheduleHandle: TlvField(0, TlvByteString.bound({ maxLength: 16 }))
   });
@@ -514,7 +514,7 @@ var Thermostat;
      *
      *   • 11 = Reserved
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.6.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.6.1
      */
     coolingStage: BitField(1, 0),
     /**
@@ -530,7 +530,7 @@ var Thermostat;
      *
      *   • 11 = Reserved
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.6.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.6.2
      */
     heatingStage: BitField(3, 0),
     /**
@@ -542,7 +542,7 @@ var Thermostat;
      *
      *   • 1 = Heat Pump
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.6.3
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.6.3
      */
     heatingIsHeatPump: BitFlag(4),
     /**
@@ -554,7 +554,7 @@ var Thermostat;
      *
      *   • 1 = Uses fuel
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.6.4
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.6.4
      */
     heatingUsesFuel: BitFlag(5)
   };
@@ -568,7 +568,7 @@ var Thermostat;
      *
      * This bit shall be supported if the OutdoorTemperature attribute is supported.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.11.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.8.11.1
      */
     outdoorTemperature: BitFlag(1),
     /**
@@ -706,14 +706,14 @@ var Thermostat;
     /**
      * The field shall specify which setpoints are to be adjusted.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.1.1
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.1.1
      */
     mode: TlvField(0, TlvEnum()),
     /**
      * This field shall indicate the amount (possibly negative) that should be added to the setpoint(s), in steps of
      * 0.1°C.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.1.2
+     * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.1.2
      */
     amount: TlvField(1, TlvInt8)
   });
@@ -737,7 +737,7 @@ var Thermostat;
        * Indicates whether the heated/cooled space is occupied or not, as measured locally or remotely (over the
        * network).
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.4
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.4
        */
       occupancy: Attribute(
         2,
@@ -754,11 +754,11 @@ var Thermostat;
        *
        * Refer to Setpoint Limits for constraints
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.5
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.5
        */
       absMinHeatSetpointLimit: OptionalFixedAttribute(3, TlvInt16, { default: 700 }),
       /**
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9
        */
       absMaxHeatSetpointLimit: OptionalFixedAttribute(4, TlvInt16, { default: 3e3 }),
       /**
@@ -767,7 +767,7 @@ var Thermostat;
        *
        * This attribute is reported regularly and may be used to control a heating device.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.10
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.10
        */
       piHeatingDemand: OptionalAttribute(8, TlvUInt8.bound({ max: 100 })),
       /**
@@ -788,7 +788,7 @@ var Thermostat;
        * either does not support the OCC feature or the Occupied bit is set on the Occupancy attribute, the value
        * of the ActivePresetHandle attribute shall be set to null.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.14
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.14
        */
       occupiedHeatingSetpoint: WritableAttribute(18, TlvInt16, { persistent: true, default: 2e3 }),
       /**
@@ -804,7 +804,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.17
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.17
        */
       minHeatSetpointLimit: OptionalWritableAttribute(
         21,
@@ -820,7 +820,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.18
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.18
        */
       maxHeatSetpointLimit: OptionalWritableAttribute(
         22,
@@ -832,7 +832,7 @@ var Thermostat;
   Thermostat2.CoolingComponent = MutableCluster.Component({
     attributes: {
       /**
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9
        */
       absMinCoolSetpointLimit: OptionalFixedAttribute(5, TlvInt16, { default: 1600 }),
       /**
@@ -841,7 +841,7 @@ var Thermostat;
        *
        * Refer to Setpoint Limits for constraints
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.8
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.8
        */
       absMaxCoolSetpointLimit: OptionalFixedAttribute(6, TlvInt16, { default: 3200 }),
       /**
@@ -850,7 +850,7 @@ var Thermostat;
        *
        * This attribute is reported regularly and may be used to control a cooling device.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.9
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.9
        */
       piCoolingDemand: OptionalAttribute(7, TlvUInt8.bound({ max: 100 })),
       /**
@@ -870,7 +870,7 @@ var Thermostat;
        * either does not support the OCC feature or the Occupied bit is set on the Occupancy attribute, the value
        * of the ActivePresetHandle attribute shall be set to null.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.13
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.13
        */
       occupiedCoolingSetpoint: WritableAttribute(17, TlvInt16, { persistent: true, default: 2600 }),
       /**
@@ -882,7 +882,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.19
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.19
        */
       minCoolSetpointLimit: OptionalWritableAttribute(
         23,
@@ -898,7 +898,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.20
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.20
        */
       maxCoolSetpointLimit: OptionalWritableAttribute(
         24,
@@ -926,7 +926,7 @@ var Thermostat;
        * Prior to revision 8 of this cluster specification the value of this attribute was constrained to a range
        * of -2.5°C to 2.5°C.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.12
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.12
        */
       localTemperatureCalibration: OptionalWritableAttribute(
         16,
@@ -954,7 +954,7 @@ var Thermostat;
        * Occupied bit is not set on the Occupancy attribute, the value of the ActivePresetHandle attribute shall
        * be set to null.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.15
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.15
        */
       unoccupiedCoolingSetpoint: WritableAttribute(19, TlvInt16, { persistent: true, default: 2600 })
     }
@@ -979,7 +979,7 @@ var Thermostat;
        * Occupied bit is not set on the Occupancy attribute, the value of the ActivePresetHandle attribute shall
        * be set to null.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.16
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.16
        */
       unoccupiedHeatingSetpoint: WritableAttribute(20, TlvInt16, { persistent: true, default: 2e3 })
     }
@@ -1002,7 +1002,7 @@ var Thermostat;
        * For backwards compatibility, this attribute is optionally writeable. However any writes to this attribute
        * shall be silently ignored.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.21
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.21
        */
       minSetpointDeadBand: WritableAttribute(
         25,
@@ -1014,7 +1014,7 @@ var Thermostat;
        * can only be Off, Cool or Heat. This attribute is intended to provide additional information when the
        * thermostat’s system mode is in auto mode.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.26
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.26
        */
       thermostatRunningMode: OptionalAttribute(
         30,
@@ -1032,19 +1032,19 @@ var Thermostat;
        * This attribute may be able to be used as the base to determine if the device supports weekly scheduling
        * by reading the attribute. Successful response means that the weekly scheduling is supported.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.27
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.27
        */
       startOfWeek: FixedAttribute(32, TlvEnum()),
       /**
        * Indicates how many weekly schedule transitions the thermostat is capable of handling.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.28
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.28
        */
       numberOfWeeklyTransitions: FixedAttribute(33, TlvUInt8, { default: 0 }),
       /**
        * Indicates how many daily schedule transitions the thermostat is capable of handling.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.29
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.29
        */
       numberOfDailyTransitions: FixedAttribute(34, TlvUInt8, { default: 0 })
     },
@@ -1058,7 +1058,7 @@ var Thermostat;
        * leave all other days unchanged. If the schedule is larger than what fits in one frame or contains more
        * than 10 transitions, the schedule shall then be sent using multiple SetWeeklySchedule Commands.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.2
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.2
        */
       setWeeklySchedule: Command(
         1,
@@ -1068,7 +1068,7 @@ var Thermostat;
         { invokeAcl: AccessLevel.Manage }
       ),
       /**
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.3
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.3
        */
       getWeeklySchedule: Command(2, Thermostat2.TlvGetWeeklyScheduleRequest, 0, Thermostat2.TlvGetWeeklyScheduleResponse),
       /**
@@ -1077,7 +1077,7 @@ var Thermostat;
        * Upon receipt, all transitions currently stored shall be cleared and a default response of SUCCESS shall
        * be sent in response. There are no error responses to this command.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.5
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.5
        */
       clearWeeklySchedule: Command(3, TlvNoArguments, 3, TlvNoResponse, { invokeAcl: AccessLevel.Manage })
     }
@@ -1105,7 +1105,7 @@ var Thermostat;
        * Thermostat server shall set its OccupiedSetback value to OccupiedSetbackMin and shall send a Write
        * Attribute Response command with a Status Code field enumeration of SUCCESS response.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.37
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.37
        */
       occupiedSetback: WritableAttribute(
         52,
@@ -1118,7 +1118,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.38
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.38
        */
       occupiedSetbackMin: FixedAttribute(53, TlvNullable(TlvUInt8), { default: null }),
       /**
@@ -1127,7 +1127,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.39
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.39
        */
       occupiedSetbackMax: FixedAttribute(54, TlvNullable(TlvUInt8), { default: null })
     }
@@ -1156,7 +1156,7 @@ var Thermostat;
        * the Thermostat server shall set its UnoccupiedSetback value to UnoccupiedSetbackMin and shall send a
        * Write Attribute Response command with a Status Code field enumeration of SUCCESS response.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.40
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.40
        */
       unoccupiedSetback: WritableAttribute(
         55,
@@ -1169,7 +1169,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.41
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.41
        */
       unoccupiedSetbackMin: FixedAttribute(56, TlvNullable(TlvUInt8), { default: null }),
       /**
@@ -1178,7 +1178,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.42
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.42
        */
       unoccupiedSetbackMax: FixedAttribute(57, TlvNullable(TlvUInt8), { default: null })
     }
@@ -1189,20 +1189,20 @@ var Thermostat;
        * Indicates the supported PresetScenarioEnum values, limits on how many presets can be created for each
        * PresetScenarioEnum, and whether or not a thermostat can transition automatically to a given scenario.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.52
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.52
        */
       presetTypes: FixedAttribute(72, TlvArray(Thermostat2.TlvPresetType), { default: [] }),
       /**
        * Indicates the maximum number of entries supported by the Presets attribute.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.54
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.54
        */
       numberOfPresets: FixedAttribute(74, TlvUInt8, { default: 0 }),
       /**
        * Indicates the PresetHandle of the active preset. If this attribute is null, then there is no active
        * preset.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.58
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.58
        */
       activePresetHandle: Attribute(
         78,
@@ -1281,7 +1281,7 @@ var Thermostat;
        *
        *   2. Otherwise, the attribute status shall be SUCCESS.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.60
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.60
        */
       presets: WritableAttribute(
         80,
@@ -1291,7 +1291,7 @@ var Thermostat;
     },
     commands: {
       /**
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.9
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.9
        */
       setActivePresetRequest: Command(6, Thermostat2.TlvSetActivePresetRequest, 6, TlvNoResponse)
     }
@@ -1303,30 +1303,30 @@ var Thermostat;
        * each SystemMode value, and whether or not a given SystemMode value supports transitions to Presets,
        * target setpoints, or both.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.53
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.53
        */
       scheduleTypes: FixedAttribute(73, TlvArray(Thermostat2.TlvScheduleType), { default: [] }),
       /**
        * Indicates the maximum number of entries supported by the Schedules attribute.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.55
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.55
        */
       numberOfSchedules: FixedAttribute(75, TlvUInt8, { default: 0 }),
       /**
        * Indicates the maximum number of transitions per Schedules attribute entry.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.56
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.56
        */
       numberOfScheduleTransitions: FixedAttribute(76, TlvUInt8, { default: 0 }),
       /**
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9
        */
       numberOfScheduleTransitionPerDay: FixedAttribute(77, TlvNullable(TlvUInt8), { default: null }),
       /**
        * Indicates the ScheduleHandle of the active schedule. A null value in this attribute indicates that there
        * is no active schedule.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.59
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.59
        */
       activeScheduleHandle: Attribute(
         79,
@@ -1441,7 +1441,7 @@ var Thermostat;
        *
        *   2. Otherwise, the attribute status shall be SUCCESS.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.61
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.61
        */
       schedules: WritableAttribute(
         81,
@@ -1451,7 +1451,7 @@ var Thermostat;
     },
     commands: {
       /**
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.8
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.8
        */
       setActiveScheduleRequest: Command(5, Thermostat2.TlvSetActiveScheduleRequest, 5, TlvNoResponse)
     }
@@ -1504,7 +1504,7 @@ var Thermostat;
        * externally, for example due to the temperature control being done by a separate subsystem which does not
        * offer a view into the currently measured temperature, but allows setpoints to be provided.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.4.1
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.4.1
        */
       localTemperatureNotExposed: BitFlag(6),
       /**
@@ -1534,13 +1534,13 @@ var Thermostat;
        *   • Otherwise, if the LTNE feature is supported, there is no feedback externally available for the
        *     LocalTemperatureCalibration. In that case, the LocalTemperature attribute shall always report null.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.2
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.2
        */
       localTemperature: Attribute(0, TlvNullable(TlvInt16), { default: null }),
       /**
        * Indicates the outdoor temperature, as measured locally or remotely (over the network).
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.3
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.3
        */
       outdoorTemperature: OptionalAttribute(1, TlvNullable(TlvInt16), { default: null }),
       /**
@@ -1550,7 +1550,7 @@ var Thermostat;
        * from the DIP switches. If these parameters are set via software, there shall be read/write access in
        * order to provide remote programming capability.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.11
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.11
        * @deprecated
        */
       hvacSystemTypeConfiguration: OptionalWritableAttribute(
@@ -1568,7 +1568,7 @@ var Thermostat;
        * If the LocalTemperature RemoteSensing bit is written with a value of 1 when the LTNE feature is present,
        * the write shall fail and the server shall report a CONSTRAINT_ERROR.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.22
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.22
        */
       remoteSensing: OptionalWritableAttribute(
         26,
@@ -1583,7 +1583,7 @@ var Thermostat;
        * value of this attribute shall remain unchanged. This behavior is in place for backwards compatibility
        * with existing thermostats.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.23
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.23
        */
       controlSequenceOfOperation: WritableAttribute(
         27,
@@ -1594,7 +1594,7 @@ var Thermostat;
        * Indicates the current operating mode of the thermostat. Its value shall be limited by the
        * ControlSequenceOfOperation attribute.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.24
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.24
        */
       systemMode: WritableAttribute(
         28,
@@ -1619,7 +1619,7 @@ var Thermostat;
        * If this attribute is updated to SetpointHoldOff and the SetpointHoldExpiryTimestamp is supported, the
        * server shall set the SetpointHoldExpiryTimestamp to null.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.30
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.30
        */
       temperatureSetpointHold: OptionalWritableAttribute(
         35,
@@ -1638,7 +1638,7 @@ var Thermostat;
        * If this attribute is set to null and the SetpointHoldExpiryTimestamp is supported, the server shall set
        * the SetpointHoldExpiryTimestamp to null.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.31
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.31
        */
       temperatureSetpointHoldDuration: OptionalWritableAttribute(
         36,
@@ -1663,7 +1663,7 @@ var Thermostat;
        * Modifying the ScheduleActive bit does not clear or delete previous weekly schedule programming
        * configurations.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.32
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.32
        */
       thermostatProgrammingOperationMode: OptionalWritableAttribute(
         37,
@@ -1674,7 +1674,7 @@ var Thermostat;
        * Indicates the current relay state of the heat, cool, and fan relays. Unimplemented outputs shall be
        * treated as if they were Off.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.33
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.33
        */
       thermostatRunningState: OptionalAttribute(41, TlvBitmap(TlvUInt16, Thermostat2.RelayState)),
       /**
@@ -1686,7 +1686,7 @@ var Thermostat;
        * provider). Because automation services may initiate frequent setpoint changes, this attribute clearly
        * differentiates the source of setpoint changes made at the thermostat.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.34
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.34
        */
       setpointChangeSource: OptionalAttribute(
         48,
@@ -1700,13 +1700,13 @@ var Thermostat;
        *
        * The null value indicates that the previous setpoint was unknown.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.35
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.35
        */
       setpointChangeAmount: OptionalAttribute(49, TlvNullable(TlvInt16), { default: null }),
       /**
        * Indicates the time in UTC at which the SetpointChangeAmount attribute change was recorded.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.36
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.36
        */
       setpointChangeSourceTimestamp: OptionalAttribute(50, TlvEpochS, { default: 0 }),
       /**
@@ -1735,7 +1735,7 @@ var Thermostat;
        * when a setpoint is of a specified amount greater than the measured temperature. This allows the heated
        * space to be quickly heated to the desired level set by the user.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.43
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.43
        */
       emergencyHeatDelta: OptionalWritableAttribute(
         58,
@@ -1746,7 +1746,7 @@ var Thermostat;
        * Indicates the type of Mini Split ACTypeEnum of Mini Split AC is defined depending on how Cooling and
        * Heating condition is achieved by Mini Split AC.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.44
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.44
        */
       acType: OptionalWritableAttribute(
         64,
@@ -1756,7 +1756,7 @@ var Thermostat;
       /**
        * Indicates capacity of Mini Split AC in terms of the format defined by the ACCapacityFormat attribute
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.45
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.45
        */
       acCapacity: OptionalWritableAttribute(
         65,
@@ -1766,7 +1766,7 @@ var Thermostat;
       /**
        * Indicates type of refrigerant used within the Mini Split AC.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.46
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.46
        */
       acRefrigerantType: OptionalWritableAttribute(
         66,
@@ -1776,7 +1776,7 @@ var Thermostat;
       /**
        * Indicates the type of compressor used within the Mini Split AC.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.47
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.47
        */
       acCompressorType: OptionalWritableAttribute(
         67,
@@ -1786,7 +1786,7 @@ var Thermostat;
       /**
        * Indicates the type of errors encountered within the Mini Split AC.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.48
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.48
        */
       acErrorCode: OptionalWritableAttribute(
         68,
@@ -1796,7 +1796,7 @@ var Thermostat;
       /**
        * Indicates the position of Louver on the AC.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.49
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.49
        */
       acLouverPosition: OptionalWritableAttribute(
         69,
@@ -1806,13 +1806,13 @@ var Thermostat;
       /**
        * Indicates the temperature of the AC coil, as measured locally or remotely (over the network).
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.50
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.50
        */
       acCoilTemperature: OptionalAttribute(70, TlvNullable(TlvInt16), { default: null }),
       /**
        * Indicates the format for the ACCapacity attribute.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.51
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.51
        */
       acCapacityFormat: OptionalWritableAttribute(
         71,
@@ -1828,7 +1828,7 @@ var Thermostat;
        * null, this attribute shall be set to null indicating there is no hold on the Thermostat either with or
        * without a duration.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.62
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.9.62
        */
       setpointHoldExpiryTimestamp: OptionalAttribute(
         82,
@@ -1838,7 +1838,7 @@ var Thermostat;
     },
     commands: {
       /**
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.1
+       * @see {@link MatterSpecification.v14.Cluster} § 4.3.10.1
        */
       setpointRaiseLower: Command(0, Thermostat2.TlvSetpointRaiseLowerRequest, 0, TlvNoResponse)
     },