@matter/types 0.13.0-alpha.0-20250304-d4a7592a4 → 0.13.0-alpha.0-20250311-3eb0af5f2

package/src/clusters/general-diagnostics.ts

@@ -90,9 +90,10 @@ export namespace GeneralDiagnostics {
          *   • If Value is 0x55 and the Count is zero, then the PayloadTestResponse would have the Payload field set to
          *     an empty octet string.
          *
-         *   • If Value is 0xA5 and the Count is 10, the PayloadTestResponse would have the Payload field set to a
-         *     content whose hexadecimal representation would be A5A5A5A5A5A5A5A5A5A5, and base64 representation would
-         *     be paWlpaWlpaWlpQ==.
+         *   • If Value is 0xA5 and the Count is 10, the PayloadTestResponse would have the Payload field set
+         *
+         * to a content whose hexadecimal representation would be A5A5A5A5A5A5A5A5A5A5, and base64 representation would
+         * be paWlpaWlpaWlpQ==.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.12.7.4.3
          */
@@ -199,9 +200,11 @@ export namespace GeneralDiagnostics {
         offPremiseServicesReachableIPv6: TlvField(3, TlvNullable(TlvBoolean)),
 
         /**
-         * This field shall contain the current link-layer address for a 802.3 or IEEE 802.11-2020 network interface
-         * and contain the current extended MAC address for a 802.15.4 interface. The byte order of the octstr shall be
-         * in wire byte order. For addresses values less than 64 bits, the first two bytes shall be zero.
+         * This field shall contain the current link-layer address for a 802.3 or IEEE 802.11-2020 network
+         *
+         * interface and contain the current extended MAC address for a 802.15.4 interface. The byte order of the
+         * octstr shall be in wire byte order. For addresses values less than 64 bits, the first two bytes shall be
+         * zero.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.12.5.6.5
          */
@@ -439,8 +442,9 @@ export namespace GeneralDiagnostics {
          * Values of EventTrigger in the range 0xFFFF_FFFF_0000_0000 through 0xFFFF_FFFF_FFFF_FFFF are reserved for
          * testing use by manufacturers and will not appear in CSA certification test literature.
          *
-         * If the value of EventTrigger received is not supported by the receiving Node, this command shall fail with a
-         * status code of INVALID_COMMAND.
+         * If the value of EventTrigger received is not supported by the receiving Node, this command shall
+         *
+         * fail with a status code of INVALID_COMMAND.
          *
          * Otherwise, if the EnableKey value matches the configured internal value for a particular Node, and the
          * EventTrigger value matches a supported test event trigger value, the command shall succeed and execute the
@@ -520,16 +524,14 @@ export namespace GeneralDiagnostics {
      */
     export const TlvHardwareFaultChangeEvent = TlvObject({
         /**
-         * This field shall represent the set of faults currently detected, as per Section 11.12.5.1,
-         * “HardwareFaultEnum Type”.
+         * This field shall represent the set of faults currently detected, as per HardwareFaultEnum.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.12.8.1.1
          */
         current: TlvField(0, TlvArray(TlvEnum<HardwareFault>(), { maxLength: 11 })),
 
         /**
-         * This field shall represent the set of faults detected prior to this change event, as per Section 11.12.5.1,
-         * “HardwareFaultEnum Type”.
+         * This field shall represent the set of faults detected prior to this change event, as per HardwareFaultEnum.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.12.8.1.2
          */
@@ -550,16 +552,14 @@ export namespace GeneralDiagnostics {
      */
     export const TlvRadioFaultChangeEvent = TlvObject({
         /**
-         * This field shall represent the set of faults currently detected, as per Section 11.12.5.2, “RadioFaultEnum
-         * Type”.
+         * This field shall represent the set of faults currently detected, as per RadioFaultEnum.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.12.8.2.1
          */
         current: TlvField(0, TlvArray(TlvEnum<RadioFault>(), { maxLength: 7 })),
 
         /**
-         * This field shall represent the set of faults detected prior to this change event, as per Section 11.12.5.2,
-         * “RadioFaultEnum Type”.
+         * This field shall represent the set of faults detected prior to this change event, as per RadioFaultEnum.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.12.8.2.2
          */
@@ -580,16 +580,14 @@ export namespace GeneralDiagnostics {
      */
     export const TlvNetworkFaultChangeEvent = TlvObject({
         /**
-         * This field shall represent the set of faults currently detected, as per Section 11.12.5.3, “NetworkFaultEnum
-         * Type”.
+         * This field shall represent the set of faults currently detected, as per NetworkFaultEnum.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.12.8.3.1
          */
         current: TlvField(0, TlvArray(TlvEnum<NetworkFault>(), { maxLength: 4 })),
 
         /**
-         * This field shall represent the set of faults detected prior to this change event, as per Section 11.12.5.3,
-         * “NetworkFaultEnum Type”.
+         * This field shall represent the set of faults detected prior to this change event, as per NetworkFaultEnum.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.12.8.3.2
          */
@@ -725,11 +723,12 @@ export namespace GeneralDiagnostics {
              * The ActiveHardwareFaults attribute shall indicate the set of faults currently detected by the Node. When
              * the Node detects a fault has been raised, the appropriate HardwareFaultEnum value shall be added to this
              * list. This list shall NOT contain more than one instance of a specific HardwareFaultEnum value. When the
-             * Node detects that all conditions contributing to a fault has been cleared, the corresponding
-             * HardwareFaultEnum value shall be removed from this list. An empty list shall indicate there are
-             * currently no active faults. The order of this list SHOULD have no significance. Clients interested in
-             * monitoring changes in active faults may subscribe to this attribute, or they may subscribe to
-             * HardwareFaultChange.
+             * Node detects that all conditions contributing to a fault has been
+             *
+             * cleared, the corresponding HardwareFaultEnum value shall be removed from this list. An empty list shall
+             * indicate there are currently no active faults. The order of this list SHOULD have no significance.
+             * Clients interested in monitoring changes in active faults may subscribe to this attribute, or they may
+             * subscribe to HardwareFaultChange.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.12.6.6
              */
@@ -776,10 +775,10 @@ export namespace GeneralDiagnostics {
             /**
              * The TestEventTriggersEnabled attribute shall indicate whether the Node has any TestEventTrigger
              * configured. When this attribute is true, the Node has been configured with one or more test event
-             * triggers by virtue of the internally programmed EnableKey value (see Section 11.12.7.1,
-             * “TestEventTrigger Command”) being set to a non-zero value. This attribute can be used by Administrators
-             * to detect if a device was inadvertently commissioned with test event trigger mode enabled, and take
-             * appropriate action (e.g. warn the user and/or offer to remove all fabrics on the Node).
+             * triggers by virtue of the internally programmed EnableKey value (see TestEventTrigger) being set to a
+             * non-zero value. This attribute can be used by Administrators to detect if a device was inadvertently
+             * commissioned with test event trigger mode enabled, and take appropriate action (e.g. warn the user
+             * and/or offer to remove all fabrics on the Node).
              *
              * @see {@link MatterSpecification.v13.Core} § 11.12.6.9
              */
@@ -807,10 +806,9 @@ export namespace GeneralDiagnostics {
 
             /**
              * This command may be used by a client to obtain a correlated view of both System Time, and, if currently
-             * synchronized and supported, "wall clock time" of the server. This can help clients establish
-             *
-             * time correlation between their concept of time and the server’s concept of time. This is especially
-             * useful when processing event histories where some events only contain System Time.
+             * synchronized and supported, "wall clock time" of the server. This can help clients establish time
+             * correlation between their concept of time and the server’s concept of time. This is especially useful
+             * when processing event histories where some events only contain System Time.
              *
              * Upon command invocation, the server shall respond with a TimeSnapshotResponse.
              *

package/src/clusters/group-key-management.ts

@@ -57,7 +57,7 @@ export namespace GroupKeyManagement {
 
         /**
          * This field references the set of group keys that generate operational group keys for use with this group, as
-         * specified in Section 4.16.3.5.1, “Group Key Set ID”.
+         * specified in Section 4.17.3.5.1, “Group Key Set ID”.
          *
          * A GroupKeyMapStruct shall NOT accept GroupKeySetID of 0, which is reserved for the IPK.
          *
@@ -151,7 +151,7 @@ export namespace GroupKeyManagement {
     export const TlvGroupKeySet = TlvObject({
         /**
          * This field shall provide the fabric-unique index for the associated group key set, as specified in Section
-         * 4.16.3.5.1, “Group Key Set ID”.
+         * 4.17.3.5.1, “Group Key Set ID”.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.2.5.4.1
          */
@@ -176,7 +176,7 @@ export namespace GroupKeyManagement {
         epochKey0: TlvField(2, TlvNullable(TlvByteString.bound({ length: 16 }))),
 
         /**
-         * This field, if not null, shall define when EpochKey0 becomes valid as specified by Section 4.16.3, “Epoch
+         * This field, if not null, shall define when EpochKey0 becomes valid as specified by Section 4.17.3, “Epoch
          * Keys”. Units are absolute UTC time in microseconds encoded using the epoch-us representation.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.2.5.4.4
@@ -184,16 +184,15 @@ export namespace GroupKeyManagement {
         epochStartTime0: TlvField(3, TlvNullable(TlvEpochUs)),
 
         /**
-         * This field, if not null, shall be the root credential used in the derivation of an operational group
-         *
-         * key for epoch slot 1 of the given group key set. If EpochKey1 is not null, EpochStartTime1 shall NOT be null.
+         * This field, if not null, shall be the root credential used in the derivation of an operational group key for
+         * epoch slot 1 of the given group key set. If EpochKey1 is not null, EpochStartTime1 shall NOT be null.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.2.5.4.5
          */
         epochKey1: TlvField(4, TlvNullable(TlvByteString.bound({ length: 16 }))),
 
         /**
-         * This field, if not null, shall define when EpochKey1 becomes valid as specified by Section 4.16.3, “Epoch
+         * This field, if not null, shall define when EpochKey1 becomes valid as specified by Section 4.17.3, “Epoch
          * Keys”. Units are absolute UTC time in microseconds encoded using the epoch-us representation.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.2.5.4.6
@@ -209,7 +208,7 @@ export namespace GroupKeyManagement {
         epochKey2: TlvField(6, TlvNullable(TlvByteString.bound({ length: 16 }))),
 
         /**
-         * This field, if not null, shall define when EpochKey2 becomes valid as specified by Section 4.16.3, “Epoch
+         * This field, if not null, shall define when EpochKey2 becomes valid as specified by Section 4.17.3, “Epoch
          * Keys”. Units are absolute UTC time in microseconds encoded using the epoch-us representation.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.2.5.4.8
@@ -358,8 +357,9 @@ export namespace GroupKeyManagement {
 
             /**
              * This attribute is a list of GroupInfoMapStruct entries. Each entry provides read-only information about
-             * how a given logical Group ID maps to a particular set of endpoints, and a name for the group. The
-             * content of this attribute reflects data managed via the Groups cluster (see AppClusters), and is in
+             * how a given logical Group ID maps to a particular set of endpoints, and a name for the group.
+             *
+             * The content of this attribute reflects data managed via the Groups cluster (see AppClusters), and is in
              * general terms referred to as the 'node-wide Group Table'.
              *
              * The GroupTable shall NOT contain any entry whose GroupInfoMapStruct has an empty Endpoints list. If a
@@ -437,18 +437,18 @@ export namespace GroupKeyManagement {
              *     being null, then this command shall fail with an INVALID_COMMAND status code responded to the client.
              *
              * If there exists a Group Key Set associated with the accessing fabric which has the same GroupKeySetID as
-             * that provided in the GroupKeySet field, then the contents of that group key set shall be replaced. A
-             * replacement shall be done by executing the equivalent of entirely removing the previous Group Key Set
-             * with the given GroupKeySetID, followed by an addition of a Group Key Set with the provided
+             * that provided in the GroupKeySet field, then the contents of that group key set shall be
+             *
+             * replaced. A replacement shall be done by executing the equivalent of entirely removing the previous
+             * Group Key Set with the given GroupKeySetID, followed by an addition of a Group Key Set with the provided
              * configuration. Otherwise, if the GroupKeySetID did not match an existing entry, a new Group Key Set
              * associated with the accessing fabric shall be created with the provided data. The Group Key Set shall be
              * written to non-volatile storage.
              *
              * Upon completion, this command shall send a status code back to the initiator:
              *
-             *   • If the Group Key Set was properly installed or updated on the Node, the status code shall be
-             *
-             * set to SUCCESS.
+             *   • If the Group Key Set was properly installed or updated on the Node, the status code shall be set to
+             *     SUCCESS.
              *
              *   • If there are insufficient resources on the receiver to store an additional Group Key Set, the status
              *     code shall be set to RESOURCE_EXHAUSTED (see group key limits);
@@ -486,10 +486,9 @@ export namespace GroupKeyManagement {
              *
              * Effect on Receipt
              *
-             * If there exists a Group Key Set associated with the accessing fabric which has the same GroupKey
-             *
-             * SetID as that provided in the GroupKeySetID field, then the contents of that Group Key Set shall be
-             * removed, including all epoch keys it contains.
+             * If there exists a Group Key Set associated with the accessing fabric which has the same GroupKeySetID as
+             * that provided in the GroupKeySetID field, then the contents of that Group Key Set shall be removed,
+             * including all epoch keys it contains.
              *
              * If there exist any entries for the accessing fabric within the GroupKeyMap attribute that refer to the
              * GroupKeySetID just removed, then these entries shall be removed from that list.
@@ -516,8 +515,6 @@ export namespace GroupKeyManagement {
              * This command is used by Administrators to query a list of all Group Key Sets associated with the
              * accessing fabric.
              *
-             * NOTE Field 0 for this command is reserved and shall NOT be used.
-             *
              * Effect on Receipt
              *
              * Upon receipt, this command shall iterate all stored GroupKeySetStruct associated with the accessing
@@ -555,8 +552,9 @@ export namespace GroupKeyManagement {
      * require Administer privilege.
      *
      * Each group entry includes a membership list of zero of more endpoints that are members of the group on the node.
-     * Modification of this membership list is done via the Groups cluster, which is scoped to an endpoint. Please see
-     * the System Model specification for more information on groups.
+     * Modification of this membership list is done via the Groups cluster, which is
+     *
+     * scoped to an endpoint. Please see the System Model specification for more information on groups.
      *
      * GroupKeyManagementCluster supports optional features that you can enable with the
      * GroupKeyManagementCluster.with() factory method.

package/src/clusters/groups.ts

@@ -280,8 +280,9 @@ export namespace Groups {
         groupId: TlvField(0, TlvGroupId),
 
         /**
-         * This field may be set to a human-readable name for the group. If the client has no name for the group, the
-         * GroupName field shall be set to the empty string.
+         * This field may be set to a human-readable name for the group. If the client has no name for the
+         *
+         * group, the GroupName field shall be set to the empty string.
          *
          * Support of group names is optional and is indicated by the FeatureMap and NameSupport attribute.
          *

package/src/clusters/icd-management.ts

@@ -20,10 +20,10 @@ import { TlvArray } from "../tlv/TlvArray.js";
 import { TlvField, TlvObject, TlvOptionalField } from "../tlv/TlvObject.js";
 import { TlvNodeId } from "../datatype/NodeId.js";
 import { TlvSubjectId } from "../datatype/SubjectId.js";
+import { TlvEnum, TlvUInt32, TlvUInt16, TlvBitmap } from "../tlv/TlvNumber.js";
 import { TlvFabricIndex } from "../datatype/FabricIndex.js";
 import { TypeFromSchema } from "../tlv/TlvSchema.js";
 import { AccessLevel } from "#model";
-import { TlvUInt32, TlvUInt16, TlvBitmap, TlvEnum } from "../tlv/TlvNumber.js";
 import { TlvByteString, TlvString } from "../tlv/TlvString.js";
 import { BitFlag } from "../schema/BitmapSchema.js";
 import { Identity } from "#general";
@@ -60,22 +60,45 @@ export namespace IcdManagement {
          *
          * This feature is supported if and only the device is a Long Idle Time ICD.
          *
-         * NOTE In this version of the specification, the support for the feature is provisional.
-         *
          * @see {@link MatterSpecification.v13.Core} § 9.17.4.3
          */
-        LongIdleTimeSupport = "LongIdleTimeSupport"
+        LongIdleTimeSupport = "LongIdleTimeSupport",
+
+        /**
+         * DynamicSitLitSupport (DSLS)
+         *
+         * This feature is supported if and only if the device can switch between SIT and LIT operating modes even if
+         * it has a valid registered client. See the dynamic SIT / LIT operating mode switching for more details.
+         *
+         * @see {@link MatterSpecification.v13.Core} § 9.17.4.4
+         */
+        DynamicSitLitSupport = "DynamicSitLitSupport"
     }
 
     /**
-     * @see {@link MatterSpecification.v13.Core} § 9.17.5.2
+     * @see {@link MatterSpecification.v13.Core} § 9.17.5.1.1
+     */
+    export enum ClientType {
+        /**
+         * The client is typically resident, always-on, fixed infrastructure in the home.
+         */
+        Permanent = 0,
+
+        /**
+         * The client is mobile or non-resident or not always-on and may not always be available in the home.
+         */
+        Ephemeral = 1
+    }
+
+    /**
+     * @see {@link MatterSpecification.v13.Core} § 9.17.5.3
      */
     export const TlvMonitoringRegistration = TlvObject({
         /**
          * This field shall indicate the NodeID of the Node to which Check-In messages will be sent when the
          * MonitoredSubject is not subscribed.
          *
-         * @see {@link MatterSpecification.v13.Core} § 9.17.5.2.1
+         * @see {@link MatterSpecification.v13.Core} § 9.17.5.3.1
          */
         checkInNodeId: TlvField(1, TlvNodeId),
 
@@ -95,19 +118,28 @@ export namespace IcdManagement {
          * For example, if the MonitoredSubject is Node ID 0x1111_2222_3333_AAAA, and one of the subscribers to the
          * server on the entry’s associated fabric bears that Node ID, then the entry matches.
          *
-         * Another example is if the MonitoredSubject has the value 0xFFFF_FFFD_AA12_0002, and one of the subscribers
-         * to the server on the entry’s associated fabric bears the CASE Authenticated TAG value 0xAA12 and the version
-         * 0x0002 or higher within its NOC, then the entry matches.
+         * Another example is if the MonitoredSubject has the value 0xFFFF_FFFD_AA12_0002, and one of the
+         *
+         * subscribers to the server on the entry’s associated fabric bears the CASE Authenticated TAG value 0xAA12 and
+         * the version 0x0002 or higher within its NOC, then the entry matches.
          *
-         * @see {@link MatterSpecification.v13.Core} § 9.17.5.2.2
+         * @see {@link MatterSpecification.v13.Core} § 9.17.5.3.2
          */
         monitoredSubject: TlvField(2, TlvSubjectId),
 
+        /**
+         * This field shall indicate the client’s type to inform the ICD of the availability for communication of the
+         * client.
+         *
+         * @see {@link MatterSpecification.v13.Core} § 9.17.5.4
+         */
+        clientType: TlvField(4, TlvEnum<ClientType>()),
+
         fabricIndex: TlvField(254, TlvFabricIndex)
     });
 
     /**
-     * @see {@link MatterSpecification.v13.Core} § 9.17.5.2
+     * @see {@link MatterSpecification.v13.Core} § 9.17.5.3
      */
     export interface MonitoringRegistration extends TypeFromSchema<typeof TlvMonitoringRegistration> {}
 
@@ -149,7 +181,14 @@ export namespace IcdManagement {
          *
          * @see {@link MatterSpecification.v13.Core} § 9.17.7.1.4
          */
-        verificationKey: TlvOptionalField(3, TlvByteString.bound({ length: 16 }))
+        verificationKey: TlvOptionalField(3, TlvByteString.bound({ length: 16 })),
+
+        /**
+         * This field shall provide the client type of the client registering.
+         *
+         * @see {@link MatterSpecification.v13.Core} § 9.17.7.1.5
+         */
+        clientType: TlvField(4, TlvEnum<ClientType>())
     });
 
     /**
@@ -302,7 +341,7 @@ export namespace IcdManagement {
     };
 
     /**
-     * @see {@link MatterSpecification.v13.Core} § 9.17.5.3
+     * @see {@link MatterSpecification.v13.Core} § 9.17.5.2
      */
     export enum OperatingMode {
         /**
@@ -402,7 +441,17 @@ export namespace IcdManagement {
              *
              * @see {@link MatterSpecification.v13.Core} § 9.17.6.6
              */
-            clientsSupportedPerFabric: FixedAttribute(0x5, TlvUInt16.bound({ min: 1 }), { default: 1 })
+            clientsSupportedPerFabric: FixedAttribute(0x5, TlvUInt16.bound({ min: 1 }), { default: 1 }),
+
+            /**
+             * Indicates the maximum time in seconds between two Check-In messages when back-off is active. The
+             * MaximumCheckInBackoff shall NOT be smaller than the IdleModeDuration.
+             *
+             * If the MaximumCheckInBackoff is equal to the IdleModeDuration, it means the ICD does notback- off.
+             *
+             * @see {@link MatterSpecification.v13.Core} § 9.17.6.10
+             */
+            maximumCheckInBackoff: FixedAttribute(0x9, TlvUInt32.bound({ max: 64800 }), { default: 1 })
         },
 
         commands: {
@@ -454,8 +503,8 @@ export namespace IcdManagement {
              * a dependency on the UserActiveModeTriggerInstruction attribute but do not require the attribute to be
              * present.
              *
-             * An ICD can indicate multiple ways of being put into Active Mode by setting multiple bits in the bitmap
-             * at the same time. However, a device shall NOT set more than one bit which has a dependency on the
+             * ### An ICD can indicate multiple ways of being put into Active Mode by setting multiple bits in the
+             * bitmap at the same time. However, a device shall NOT set more than one bit which has a dependency on the
              * UserActiveModeTriggerInstruction attribute.
              *
              * @see {@link MatterSpecification.v13.Core} § 9.17.6.7
@@ -503,7 +552,7 @@ export namespace IcdManagement {
     export const Base = MutableCluster.Component({
         id: 0x46,
         name: "IcdManagement",
-        revision: 2,
+        revision: 3,
 
         features: {
             /**
@@ -530,11 +579,19 @@ export namespace IcdManagement {
              *
              * This feature is supported if and only the device is a Long Idle Time ICD.
              *
-             * NOTE In this version of the specification, the support for the feature is provisional.
-             *
              * @see {@link MatterSpecification.v13.Core} § 9.17.4.3
              */
-            longIdleTimeSupport: BitFlag(2)
+            longIdleTimeSupport: BitFlag(2),
+
+            /**
+             * DynamicSitLitSupport
+             *
+             * This feature is supported if and only if the device can switch between SIT and LIT operating modes even
+             * if it has a valid registered client. See the dynamic SIT / LIT operating mode switching for more details.
+             *
+             * @see {@link MatterSpecification.v13.Core} § 9.17.4.4
+             */
+            dynamicSitLitSupport: BitFlag(3)
         },
 
         attributes: {
@@ -569,9 +626,8 @@ export namespace IcdManagement {
              * device to Active Mode. If the attribute is present, the value shall be encoded as a valid UTF-8 string
              * with a maximum length of 128 bytes. If the UserActiveModeTriggerHint has the ActuateSensorSeconds,
              * ActuateSensorTimes, ResetButtonSeconds, ResetButtonTimes, SetupButtonSeconds or SetupButtonTimes set,
-             * the string shall consist solely of an encoding of N as a decimal
-             *
-             * unsigned integer using the ASCII digits 0-9, and without leading zeros.
+             * the string shall consist solely of an encoding of N as a decimal unsigned integer using the ASCII digits
+             * 0-9, and without leading zeros.
              *
              * For example, given UserActiveModeTriggerHint="2048", ResetButtonTimes is set which indicates "Press
              * Reset Button for N seconds". Therefore, a value of UserActiveModeTriggerInstruction="10" would indicate
@@ -582,13 +638,11 @@ export namespace IcdManagement {
              * indicated in the Device’s currently configured locale). The Custom Instruction option SHOULD NOT be used
              * by an ICD that does not have knowledge of the user’s language preference.
              *
-             * ### When the UserActiveModeTriggerHint key indicates a light to blink (ActuateSensorLightsBlink,
+             * When the UserActiveModeTriggerHint key indicates a light to blink (ActuateSensorLightsBlink,
              * ResetButtonLightsBlink or SetupButtonLightsBlink), information on color of light may be made available
              * via the UserActiveModeTriggerInstruction attribute. When using such color indication in the
-             * UserActiveModeTriggerInstruction attribute, only basic primary and secondary colors that could
-             * unambiguously be decoded by a commissioner and understood by an end-user, but without worry of
-             * localization, SHOULD be used, e.g. white, red, green, blue, orange, yellow, purple. The length of the
-             * attribute SHOULD be kept small.
+             * UserActiveModeTriggerInstruction attribute, the string shall consist of exactly 6 hexadecimal digits
+             * using the ASCII characters 0-F and encoding the RGB color value as used in HTML encodings.
              *
              * @see {@link MatterSpecification.v13.Core} § 9.17.6.8
              */
@@ -623,7 +677,8 @@ export namespace IcdManagement {
             { flags: { userActiveModeTrigger: true }, component: UserActiveModeTriggerComponent },
             { flags: { longIdleTimeSupport: true }, component: LongIdleTimeSupportComponent },
             { flags: { longIdleTimeSupport: true, checkInProtocolSupport: false }, component: false },
-            { flags: { longIdleTimeSupport: true, userActiveModeTrigger: false }, component: false }
+            { flags: { longIdleTimeSupport: true, userActiveModeTrigger: false }, component: false },
+            { flags: { dynamicSitLitSupport: true, longIdleTimeSupport: false }, component: false }
         )
     });
 
@@ -638,8 +693,6 @@ export namespace IcdManagement {
      *
      * The cluster implements the requirements of the Check-In Protocol that enables the ICD Check-In use case.
      *
-     * NOTE This feature is provisional.
-     *
      * IcdManagementCluster supports optional features that you can enable with the IcdManagementCluster.with() factory
      * method.
      *
@@ -682,6 +735,10 @@ export namespace IcdManagement {
             operatingMode: MutableCluster.AsConditional(
                 LongIdleTimeSupportComponent.attributes.operatingMode,
                 { mandatoryIf: [LITS] }
+            ),
+            maximumCheckInBackoff: MutableCluster.AsConditional(
+                CheckInProtocolSupportComponent.attributes.maximumCheckInBackoff,
+                { mandatoryIf: [CIP] }
             )
         },
 

package/src/clusters/identify.ts

@@ -117,7 +117,7 @@ export namespace Identify {
      */
     export const TlvTriggerEffectRequest = TlvObject({
         /**
-         * This field specifies the identify effect to use and shall contain one of the non-reserved values in
+         * This field shall indicate the identify effect to use and shall contain one of the non-reserved values in
          * EffectIdentifierEnum.
          *
          * All values of the EffectIdentifierEnum shall be supported. Implementors may deviate from the example light
@@ -128,8 +128,8 @@ export namespace Identify {
         effectIdentifier: TlvField(0, TlvEnum<EffectIdentifier>()),
 
         /**
-         * This field is used to indicate which variant of the effect, indicated in the EffectIdentifier field, SHOULD
-         * be triggered. If a device does not support the given variant, it shall use the default variant. This field
+         * This field shall indicate which variant of the effect, indicated in the EffectIdentifier field, SHOULD be
+         * triggered. If a device does not support the given variant, it shall use the default variant. This field
          * shall contain one of the values in EffectVariantEnum.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 1.2.6.2.2
@@ -150,12 +150,11 @@ export namespace Identify {
     export const ClusterInstance = MutableCluster({
         id: 0x3,
         name: "Identify",
-        revision: 4,
+        revision: 5,
 
         attributes: {
             /**
-             * This attribute specifies the remaining length of time, in seconds, that the endpoint will continue to
-             * identify itself.
+             * Indicates the remaining length of time, in seconds, that the endpoint will continue to identify itself.
              *
              * If this attribute is set to a value other than 0 then the device shall enter its identification state,
              * in order to indicate to an observer which of several nodes and/or endpoints it is. It is recommended
@@ -170,11 +169,11 @@ export namespace Identify {
             identifyTime: WritableAttribute(0x0, TlvUInt16, { default: 0 }),
 
             /**
-             * This attribute specifies how the identification state is presented to the user.
+             * Indicates how the identification state is presented to the user.
              *
-             * This field shall contain one of the values defined in IdentifyTypeEnum. The value None shall NOT be used
-             * if the device is capable of presenting its identification state using one of the other methods defined
-             * in IdentifyTypeEnum.
+             * This attribute shall contain one of the values defined in IdentifyTypeEnum. The value None shall NOT be
+             * used if the device is capable of presenting its identification state using one of the other methods
+             * defined in IdentifyTypeEnum.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 1.2.5.2
              */

package/src/clusters/illuminance-measurement.ts

@@ -39,7 +39,7 @@ export namespace IlluminanceMeasurement {
 
         attributes: {
             /**
-             * The MeasuredValue attribute represents the illuminance in Lux (symbol lx) as follows:
+             * Indicates the illuminance in Lux (symbol lx) as follows:
              *
              *   • MeasuredValue = 10,000 x log10(illuminance) + 1,
              *
@@ -59,20 +59,20 @@ export namespace IlluminanceMeasurement {
             measuredValue: Attribute(0x0, TlvNullable(TlvUInt16), { default: 0 }),
 
             /**
-             * The MinMeasuredValue attribute indicates the minimum value of MeasuredValue that can be measured. A
-             * value of null indicates that this attribute is not defined. See Measured Value for more details.
+             * Indicates the minimum value of MeasuredValue that can be measured. A value of null indicates that this
+             * attribute is not defined. See Measured Value for more details.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 2.2.5.2
              */
-            minMeasuredValue: Attribute(0x1, TlvNullable(TlvUInt16.bound({ min: 1 }))),
+            minMeasuredValue: Attribute(0x1, TlvNullable(TlvUInt16.bound({ min: 1, max: 65533 }))),
 
             /**
-             * The MaxMeasuredValue attribute indicates the maximum value of MeasuredValue that can be measured. A
-             * value of null indicates that this attribute is not defined. See Measured Value for more details.
+             * Indicates the maximum value of MeasuredValue that can be measured. A value of null indicates that this
+             * attribute is not defined. See Measured Value for more details.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 2.2.5.3
              */
-            maxMeasuredValue: Attribute(0x2, TlvNullable(TlvUInt16.bound({ max: 65534 }))),
+            maxMeasuredValue: Attribute(0x2, TlvNullable(TlvUInt16)),
 
             /**
              * See Measured Value.
@@ -82,9 +82,8 @@ export namespace IlluminanceMeasurement {
             tolerance: OptionalAttribute(0x3, TlvUInt16.bound({ max: 2048 })),
 
             /**
-             * The LightSensorType attribute specifies the electronic type of the light sensor. This attribute shall be
-             * set to one of the non-reserved values listed in LightSensorTypeEnum or null in case the sensor type is
-             * unknown.
+             * Indicates the electronic type of the light sensor. This attribute shall be set to one of the
+             * non-reserved values listed in LightSensorTypeEnum or null in case the sensor type is unknown.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 2.2.5.5
              */