@matter/model 0.16.0-alpha.0-20251023-bb23617e5 → 0.16.0-alpha.0-20251029-bd92894d4

package/src/standard/resources/ota-software-update-provider.resource.ts

@@ -103,6 +103,8 @@ Resource.add(
                             "externally agreed-upon policy whereby strictly correct additional MetadataForProvider is expected to " +
                             "fulfill the OTA Software Update process." +
                             "\n" +
+                            "### Usage of the QueryImage Command" +
+                            "\n" +
                             "OTA Requestors shall send a QueryImage command to the OTA Provider to determine the availability of " +
                             "a new Software Image." +
                             "\n" +
@@ -133,7 +135,8 @@ Resource.add(
                             "Providers SHOULD expect OTA Requestors to follow this value to their best capability, however, a " +
                             "restarting Node may come back sooner, due to having lost track of this state response." +
                             "\n" +
-                            "The DelayedActionTime field shall only be present if the Status field is set to Busy." +
+                            "Beware, this field is conditionally present based on the conformance listed in Section 11.20.6.5.2, " +
+                            "“QueryImageResponse Command”." +
                             "\n" +
                             "See Section 11.20.3.2, “Querying the OTA Provider” for details about the rules regarding this field."
                     },
@@ -141,10 +144,11 @@ Resource.add(
                     {
                         tag: "field", name: "ImageUri", xref: "core§11.20.6.5.2.3",
 
-                        details: "This field, when present, shall contain a URI where the OTA Requestor SHOULD download a Software " +
+                        details: "This field, when present, shall contain a URI where the OTA Requestor SHOULD download a Soft ware " +
                             "Image. The syntax of the ImageURI field shall follow the URI syntax as specified in RFC 3986." +
                             "\n" +
-                            "This field shall be present if it appears in a QueryImageResponse with a Status of UpdateAvailable." +
+                            "Beware, this field is conditionally present based on the conformance listed in Section 11.20.6.5.2, " +
+                            "“QueryImageResponse Command”." +
                             "\n" +
                             "If the ImageURI specifies a BDX Protocol bdx: scheme, then the following rules describe the location " +
                             "to be used for download:" +
@@ -244,9 +248,10 @@ Resource.add(
                         tag: "field", name: "SoftwareVersion", xref: "core§11.20.6.5.2.4",
 
                         details: "This field indicates the version of the image being provided to the OTA Requestor by the OTA " +
-                            "Provider when the Status is UpdateAvailable." +
+                            "Provider." +
                             "\n" +
-                            "This field shall be present if it appears in a QueryImageResponse with a Status of UpdateAvailable." +
+                            "Beware, this field is conditionally present based on the conformance listed in Section 11.20.6.5.2, " +
+                            "“QueryImageResponse Command”." +
                             "\n" +
                             "See Section 11.20.3.2, “Querying the OTA Provider” for additional details about the flow and " +
                             "acceptable values."
@@ -256,9 +261,11 @@ Resource.add(
                         tag: "field", name: "SoftwareVersionString", xref: "core§11.20.6.5.2.5",
 
                         details: "This field provides a string version of the image being provided to the OTA Requestor by the OTA " +
-                            "Provider when the Status is UpdateAvailable." +
+                            "Provider." +
+                            "\n" +
+                            "Beware, this field is conditionally present based on the conformance listed in Section 11.20.6.5.2," +
                             "\n" +
-                            "This field shall be present if it appears in a QueryImageResponse with a Status of UpdateAvailable." +
+                            "“QueryImageResponse Command”." +
                             "\n" +
                             "See Section 11.20.3.2, “Querying the OTA Provider” for additional details about the flow and " +
                             "acceptable values."
@@ -266,7 +273,8 @@ Resource.add(
 
                     {
                         tag: "field", name: "UpdateToken", xref: "core§11.20.6.5.2.6",
-                        details: "This optional field shall be present when the Status field contains UpdateAvailable." +
+                        details: "Beware, this field is conditionally present based on the conformance listed in Section 11.20.6.5.2, " +
+                            "“QueryImageResponse Command”." +
                             "\n" +
                             "See Section 11.20.3.6.1, “UpdateToken usage” for additional details about the generation and usage " +
                             "of UpdateToken."
@@ -320,9 +328,13 @@ Resource.add(
                             "new Software Image which the OTA Requestor is ready to start applying. The OTA Provider may use this " +
                             "new version to track or record Software Image application by OTA Requestors." +
                             "\n" +
+                            "### When Generated" +
+                            "\n" +
                             "The ApplyUpdateRequest Command shall be invoked by an OTA Requestor once it is ready to apply a " +
                             "previously downloaded Software Image." +
                             "\n" +
+                            "### Effect on Receipt" +
+                            "\n" +
                             "Upon receipt of this command the OTA Provider shall respond with an Action field consistent with the " +
                             "next action the OTA Requestor should take, including any possible time delay." +
                             "\n" +
@@ -333,6 +345,8 @@ Resource.add(
                             "See Section 11.20.3.6, “Applying a software update” for a description of the flow in response to an " +
                             "OTA Provider receiving an invocation of this command." +
                             "\n" +
+                            "### Handling Error Cases" +
+                            "\n" +
                             "See Section 11.20.3.6, “Applying a software update” for all error-handling information."
                     }
                 ]
@@ -376,10 +390,12 @@ Resource.add(
                             "SoftwareVersion attribute in the invoking OTA Requestor’s Basic Information Cluster, and SHOULD be " +
                             "consistent with the value representing a new version running on the Node invoking the command." +
                             "\n" +
+                            "### When Generated" +
+                            "\n" +
                             "The NotifyUpdateApplied command SHOULD be invoked in the following two circumstances:" +
                             "\n" +
                             "  1. An OTA Requestor has just successfully applied a Software Image it had obtained from a previous " +
-                            "     QueryImage response." +
+                            "     QueryImageResponse." +
                             "\n" +
                             "  2. An OTA Requestor has just successfully applied a Software Image it had obtained through means " +
                             "     different than those of this Cluster." +
@@ -393,6 +409,8 @@ Resource.add(
                             "This command shall be considered optional and shall NOT result in reduced availability of the OTA " +
                             "Provider functionality if OTA Requestors never invoke this command." +
                             "\n" +
+                            "### Effect on Receipt" +
+                            "\n" +
                             "An OTA Provider receiving an invocation of this command may log it internally." +
                             "\n" +
                             "On receiving this command, an OTA Provider may use the information to update its bookkeeping of " +

package/src/standard/resources/ota-software-update-requestor.resource.ts

@@ -189,6 +189,8 @@ Resource.add({
                         "discovery of the location of that endpoint by walking over all endpoints and checking their " +
                         "Descriptor Cluster." +
                         "\n" +
+                        "### When Generated" +
+                        "\n" +
                         "An OTA Provider may invoke this command directly to an OTA Requestor, to announce its presence as an " +
                         "OTA Provider on the Fabric." +
                         "\n" +
@@ -197,12 +199,12 @@ Resource.add({
                         "AnnouncementReason is UrgentUpdateAvailable, in which case this command may be more frequent." +
                         "\n" +
                         "Any invocation shall be made with a delay of at least 1 second between invocations from a given OTA " +
-                        "Provider, to reduce burden on the networking infrastructure and affect a form of serialized" +
-                        "\n" +
-                        "jitter. It is recommended to offset the first announcement of a round (i.e. new set of announcements " +
-                        "after a previous complete set) by a random delay time with a distribution span of" +
+                        "Provider, to reduce burden on the networking infrastructure and affect a form of serialized jitter. " +
+                        "It is recommended to offset the first announcement of a round (i.e. new set of announcements after a " +
+                        "previous complete set) by a random delay time with a distribution span of >= 60 seconds to jitter " +
+                        "announcement schedules over time." +
                         "\n" +
-                        ">= 60 seconds to jitter announcement schedules over time." +
+                        "### Effect on Receipt" +
                         "\n" +
                         "On receipt of this command, an OTA Requestor SHOULD consider the new ProviderNodeID and " +
                         "AnnouncementReason to possibly query for new software sooner than it would have with its default " +

package/src/standard/resources/position.resource.ts

@@ -25,7 +25,10 @@ Resource.add({
         "If the Row or Column tags are used, the Label field in the same Semantic Tag structure shall be " +
         "filled with a number comprised of Arabic numerals encoded as a string to indicate the row/column of " +
         "the item. Number words (e.g. \"one\", \"two\", etc.) shall NOT be used to describe the position of the " +
-        "item. The first row/column shall use Label \"1\".",
+        "item. The first row/column shall use Label \"1\"." +
+        "\n" +
+        "The following example illustrates a compound device comprised of 9 endpoints arranged in a 3x3 grid. " +
+        "This example uses position tags to indicate position.",
 
     children: [
         { tag: "semanticTag", name: "Row", description: "Numeric value provided in Label field" },

package/src/standard/resources/power-m-va.resource.ts

@@ -0,0 +1,11 @@
+/**
+ * @license
+ * Copyright 2022-2025 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+
+import { Resource } from "#models/Resource.js";
+
+Resource.add({ tag: "datatype", name: "power-mVA", description: "Apparent Power", xref: "core§7.19.2" });

package/src/standard/resources/power-m-var.resource.ts

@@ -0,0 +1,11 @@
+/**
+ * @license
+ * Copyright 2022-2025 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+
+import { Resource } from "#models/Resource.js";
+
+Resource.add({ tag: "datatype", name: "power-mVAR", description: "Reactive Power", xref: "core§7.19.2" });

package/src/standard/resources/power-source-cluster.resource.ts

@@ -38,7 +38,8 @@ Resource.add({
 
             details: "Indicates the relative preference with which the Node will select this source to provide power. A " +
                 "source with a lower order shall be selected by the Node to provide power before any other source " +
-                "with a higher order, if the lower order source is available (see Status)." +
+                "with a higher order, if the lower order source is available (see Section 11.7.7.1, “Status " +
+                "Attribute”)." +
                 "\n" +
                 "Note, Order is read-only and therefore NOT intended to allow clients control over power source " +
                 "selection."
@@ -162,8 +163,7 @@ Resource.add({
 
         {
             tag: "attribute", name: "BatReplaceability", xref: "core§11.7.7.17",
-            details: "This attribute shall indicate the replaceability of the battery as specified in " +
-                "BatReplaceabilityEnum."
+            details: "Indicates the replaceability of the battery as specified in BatReplaceabilityEnum."
         },
         {
             tag: "attribute", name: "BatPresent", xref: "core§11.7.7.18",
@@ -281,10 +281,14 @@ Resource.add({
                 "The above rules allow that some endpoints can have an unknown power source, and therefore would not " +
                 "be indicated by any instance of this cluster." +
                 "\n" +
+                "### Empty list examples" +
+                "\n" +
                 "Typically, there is one power source for the node. Also common is mains power for the node with " +
                 "battery backup power for the node. In both these common cases, for each cluster instance described, " +
                 "the list is empty." +
                 "\n" +
+                "### Populated list example" +
+                "\n" +
                 "A node has a mains power source with Order as 0 (zero), but some application endpoints (not all) " +
                 "have a battery back up source with Order as 1, which means this list is empty for the Power Source " +
                 "cluster associated with the mains power, because it indicates the entire node, but the Power Source " +

package/src/standard/resources/pressure-measurement.resource.ts

@@ -50,7 +50,9 @@ Resource.add(
 
             {
                 tag: "attribute", name: "ScaledValue", xref: "cluster§2.4.5.5",
-                details: "Indicates the pressure in Pascals as follows: ScaledValue = 10Scale x Pressure [Pa]" +
+                details: "Indicates the pressure in Pascals as follows:" +
+                    "\n" +
+                    "ScaledValue = 10Scale x Pressure [Pa]" +
                     "\n" +
                     "The null value indicates that the value is not available."
             },
@@ -68,8 +70,9 @@ Resource.add(
 
             {
                 tag: "attribute", name: "ScaledTolerance", xref: "cluster§2.4.5.8",
-                details: "Indicates the magnitude of the possible error that is associated with ScaledValue. The true value is " +
-                    "located in the range" +
+                details: "Indicates the magnitude of the possible error that is associated with Scaled" +
+                    "\n" +
+                    "### Value. The true value is located in the range" +
                     "\n" +
                     "(ScaledValue – ScaledTolerance) to (ScaledValue + ScaledTolerance)."
             },

package/src/standard/resources/price.resource.ts

@@ -0,0 +1,14 @@
+/**
+ * @license
+ * Copyright 2022-2025 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+
+import { Resource } from "#models/Resource.js";
+
+Resource.add({
+    tag: "datatype", name: "price", description: "Price", xref: "core§7.19.2.54",
+    details: "This data type represents an amount of money in a given currency."
+});

package/src/standard/resources/priority.resource.ts

@@ -9,7 +9,7 @@
 import { Resource } from "#models/Resource.js";
 
 Resource.add({
-    tag: "datatype", name: "priority", description: "Priority", xref: "core§7.19.2.17",
+    tag: "datatype", name: "priority", description: "Priority", xref: "core§7.19.2.20",
     details: "This is an enumeration of priority used to tag events and possibly other data. The data type does " +
         "not define any particular ordering among the values. Specific uses of the data type may assign " +
         "semantics to the values that imply an ordering relationship.",

package/src/standard/resources/pump-configuration-and-control.resource.ts

@@ -100,8 +100,8 @@ Resource.add(
 
             {
                 tag: "attribute", name: "MinConstSpeed", xref: "cluster§4.2.7.8",
-                details: "This attribute specifies the minimum speed the pump can achieve when it is working with the " +
-                    "ControlMode attribute set to ConstantSpeed." +
+                details: "This attribute specifies the minimum speed the pump can achieve when it is working with the Con " +
+                    "trolMode attribute set to ConstantSpeed." +
                     "\n" +
                     "Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid."
             },
@@ -140,11 +140,14 @@ Resource.add(
 
             {
                 tag: "attribute", name: "MaxConstTemp", xref: "cluster§4.2.7.13",
+
                 details: "This attribute specifies the maximum temperature the pump can maintain in the system when it is " +
                     "working with the ControlMode attribute set to ConstantTemperature." +
                     "\n" +
                     "MaxConstTemp shall be greater than or equal to MinConstTemp Valid range is –273.15 °C to 327.67 °C " +
-                    "(steps of 0.01 °C). Null if the value is invalid."
+                    "(steps of 0.01 °C)." +
+                    "\n" +
+                    "Null if the value is invalid."
             },
 
             {
@@ -167,8 +170,8 @@ Resource.add(
                     "\n" +
                     "  • The LocalOverride bit in the PumpStatus attribute is set," +
                     "\n" +
-                    "See OperationMode and ControlMode attributes for a detailed description of the operation and control " +
-                    "of the pump."
+                    "See OperationMode Attribute and ControlMode Attribute for a detailed description of the operation " +
+                    "and control of the pump."
             },
 
             {
@@ -191,8 +194,8 @@ Resource.add(
                     "In case the ControlMode attribute is not included on the device and no remote sensors are connected, " +
                     "the value of the EffectiveControlMode shall match the vendor-specific behavior of the pump." +
                     "\n" +
-                    "See OperationMode and ControlMode attributes for detailed a description of the operation and control " +
-                    "of the pump."
+                    "See OperationMode Attribute and ControlMode Attribute for detailed a description of the operation " +
+                    "and control of the pump."
             },
 
             {
@@ -254,8 +257,7 @@ Resource.add(
                     "energy consumption of the pump increases. If LifetimeEnergyConsumed rises above maximum value it " +
                     "“rolls over” and starts at 0 (zero)." +
                     "\n" +
-                    "This attribute is writeable, in order to allow setting to an appropriate value after maintenance." +
-                    "\n" +
+                    "This attribute is writeable, in order to allow setting to an appropriate value after maintenance. " +
                     "Valid range is 0 kWh to 4,294,967,294 kWh." +
                     "\n" +
                     "Null if the value is unknown."
@@ -296,7 +298,7 @@ Resource.add(
 
                 details: "This attribute specifies the control mode of the pump as defined in ControlModeEnum." +
                     "\n" +
-                    "See the OperationMode attribute for a detailed description of the operation and control of the pump." +
+                    "See OperationMode Attribute for a detailed description of the operation and control of the pump." +
                     "\n" +
                     "ControlMode may be changed at any time, even when the pump is running. The behavior of the pump at " +
                     "the point of changing is vendor-specific." +
@@ -435,9 +437,9 @@ Resource.add(
                         tag: "field", name: "ProportionalPressure",
                         description: "The pump will regulate its speed to maintain a constant differential pressure over its flanges.",
                         xref: "cluster§4.2.6.3.3",
-                        details: "The setpoint is interpreted as a percentage of the range derived of the [MinCompPressure – " +
-                            "MaxCompPressure] attributes. The internal setpoint will be lowered (compensated) dependent on the " +
-                            "flow in the pump (lower flow ⇒ lower internal setpoint)."
+                        details: "The setpoint is interpreted as a percentage of the range derived of the [MinCompPressure – Max " +
+                            "CompPressure] attributes. The internal setpoint will be lowered (compensated) dependent on the flow " +
+                            "in the pump (lower flow ⇒ lower internal setpoint)."
                     },
 
                     {

package/src/standard/resources/pump-controller.resource.ts

@@ -13,15 +13,15 @@ Resource.add({
     details: "A Pump Controller device is capable of configuring and controlling a Pump device.",
 
     children: [
-        { tag: "requirement", name: "OnOff", xref: "device§6.5.3" },
-        { tag: "requirement", name: "PumpConfigurationAndControl", xref: "device§6.5.3" },
-        { tag: "requirement", name: "Identify", discriminator: "M:serverCluster", xref: "device§6.5.3" },
-        { tag: "requirement", name: "Identify", discriminator: "O:clientCluster", xref: "device§6.5.3" },
-        { tag: "requirement", name: "Groups", xref: "device§6.5.3" },
-        { tag: "requirement", name: "LevelControl", xref: "device§6.5.3" },
-        { tag: "requirement", name: "ScenesManagement", xref: "device§6.5.3" },
-        { tag: "requirement", name: "TemperatureMeasurement", xref: "device§6.5.3" },
-        { tag: "requirement", name: "PressureMeasurement", xref: "device§6.5.3" },
-        { tag: "requirement", name: "FlowMeasurement", xref: "device§6.5.3" }
+        { tag: "requirement", name: "OnOff", xref: "device§6.5.4" },
+        { tag: "requirement", name: "PumpConfigurationAndControl", xref: "device§6.5.4" },
+        { tag: "requirement", name: "Identify", discriminator: "M:serverCluster", xref: "device§6.5.4" },
+        { tag: "requirement", name: "Identify", discriminator: "O:clientCluster", xref: "device§6.5.4" },
+        { tag: "requirement", name: "Groups", xref: "device§6.5.4" },
+        { tag: "requirement", name: "LevelControl", xref: "device§6.5.4" },
+        { tag: "requirement", name: "ScenesManagement", xref: "device§6.5.4" },
+        { tag: "requirement", name: "TemperatureMeasurement", xref: "device§6.5.4" },
+        { tag: "requirement", name: "PressureMeasurement", xref: "device§6.5.4" },
+        { tag: "requirement", name: "FlowMeasurement", xref: "device§6.5.4" }
     ]
 });

package/src/standard/resources/relative-position.resource.ts

@@ -16,7 +16,7 @@ Resource.add({
         "user of these tags must indicate that. Note the difference with Chapter 9, Common Position Semantic " +
         "Tag Namespace, which contains tags indicating the position relative to the device.",
     children: [
-        { tag: "semanticTag", name: "Next To", description: "Area in proximity to the point of reference" },
+        { tag: "semanticTag", name: "NextTo", description: "Area in proximity to the point of reference" },
         { tag: "semanticTag", name: "Around", description: "The area surrounding the point the reference" }
     ]
 });

package/src/standard/resources/room-air-conditioner-device.resource.ts

@@ -18,8 +18,8 @@ Resource.add({
     children: [
         { tag: "requirement", name: "Identify", xref: "device§13.3.6" },
         { tag: "requirement", name: "Groups", xref: "device§13.3.6" },
-        { tag: "requirement", name: "ScenesManagement", xref: "device§13.3.6" },
         { tag: "requirement", name: "OnOff", xref: "device§13.3.6" },
+        { tag: "requirement", name: "ScenesManagement", xref: "device§13.3.6" },
         { tag: "requirement", name: "Thermostat", xref: "device§13.3.6" },
         { tag: "requirement", name: "FanControl", xref: "device§13.3.6" },
         { tag: "requirement", name: "ThermostatUserInterfaceConfiguration", xref: "device§13.3.6" },

package/src/standard/resources/rvc-clean-mode.resource.ts

@@ -59,7 +59,8 @@ Resource.add({
                 {
                     tag: "field", name: "Mop", xref: "cluster§7.3.7.2.3",
                     details: "The device’s mopping feature is enabled in this mode."
-                }
+                },
+                { tag: "field", name: "VacuumThenMop", xref: "cluster§7.3.7.2" }
             ]
         }
     ]

package/src/standard/resources/rvc-operational-state.resource.ts

@@ -73,7 +73,23 @@ Resource.add({
                 { tag: "field", name: "Error", description: "The device is in an error state" },
                 { tag: "field", name: "SeekingCharger", description: "The device is en route to the charging dock" },
                 { tag: "field", name: "Charging", description: "The device is charging" },
-                { tag: "field", name: "Docked", description: "The device is on the dock, not charging" }
+                { tag: "field", name: "Docked", description: "The device is on the dock, not charging" },
+                {
+                    tag: "field", name: "EmptyingDustBin",
+                    description: "The device is automatically emptying its own dust bin, such as to a dock"
+                },
+                {
+                    tag: "field", name: "CleaningMop",
+                    description: "The device is automatically cleaning its own mopping device, such as on a dock"
+                },
+                {
+                    tag: "field", name: "FillingWaterTank",
+                    description: "The device is automatically filling its own clean water tank for use when mopping, such as from a dock"
+                },
+                {
+                    tag: "field", name: "UpdatingMaps",
+                    description: "The device is processing acquired data to update its maps"
+                }
             ]
         },
 
@@ -108,11 +124,11 @@ Resource.add({
                 { tag: "field", name: "DustBinFull", description: "The device has detected that its dust bin is full" },
                 {
                     tag: "field", name: "WaterTankEmpty",
-                    description: "The device has detected that its water tank is empty"
+                    description: "The device has detected that its clean water tank is empty"
                 },
                 {
                     tag: "field", name: "WaterTankMissing",
-                    description: "The device has detected that its water tank is missing"
+                    description: "The device has detected that its clean water tank is missing"
                 },
                 {
                     tag: "field", name: "WaterTankLidOpen",
@@ -121,6 +137,34 @@ Resource.add({
                 {
                     tag: "field", name: "MopCleaningPadMissing",
                     description: "The device has detected that its cleaning pad is missing"
+                },
+                {
+                    tag: "field", name: "LowBattery",
+                    description: "The device is unable to start or to continue operating due to a low battery"
+                },
+                {
+                    tag: "field", name: "CannotReachTargetArea",
+                    description: "The device is unable to move to an area where it was asked to operate, such as by setting the ServiceArea cluster’s SelectedAreas attribute, due to an obstruction. For example, the obstruction might be a closed door or objects blocking the mapped path."
+                },
+                {
+                    tag: "field", name: "DirtyWaterTankFull",
+                    description: "The device has detected that its dirty water tank is full"
+                },
+                {
+                    tag: "field", name: "DirtyWaterTankMissing",
+                    description: "The device has detected that its dirty water is missing"
+                },
+                {
+                    tag: "field", name: "WheelsJammed",
+                    description: "The device has detected that one or more wheels are jammed by an object"
+                },
+                {
+                    tag: "field", name: "BrushJammed",
+                    description: "The device has detected that its brush is jammed by an object"
+                },
+                {
+                    tag: "field", name: "NavigationSensorObscured",
+                    description: "The device has detected that one of its sensors, such as LiDAR, infrared, or camera is obscured and needs to be cleaned"
                 }
             ]
         }

package/src/standard/resources/scenes-management.resource.ts

@@ -30,19 +30,10 @@ Resource.add({
             }]
         },
 
-        {
-            tag: "attribute", name: "LastConfiguredBy", xref: "cluster§1.4.8.1",
-
-            details: "Indicates the Node ID of the node that last configured the Scene Table." +
-                "\n" +
-                "The null value indicates that the server has not been configured, or that the identifier of the node " +
-                "that last configured the Scenes Management cluster is not known." +
-                "\n" +
-                "The Node ID is scoped to the accessing fabric."
-        },
+        { tag: "attribute", name: "DoNotUse", xref: "cluster§1.4.8" },
 
         {
-            tag: "attribute", name: "SceneTableSize", xref: "cluster§1.4.8.2",
+            tag: "attribute", name: "SceneTableSize", xref: "cluster§1.4.8.1",
             details: "Indicates the number of entries in the Scene Table on this endpoint. This is the total across all " +
                 "fabrics; note that a single fabric cannot use all those entries (see Handling of fabric-scoping). " +
                 "The minimum size of this table, (i.e., the minimum number of scenes to support across all fabrics " +
@@ -51,7 +42,7 @@ Resource.add({
         },
 
         {
-            tag: "attribute", name: "FabricSceneInfo", xref: "cluster§1.4.8.3",
+            tag: "attribute", name: "FabricSceneInfo", xref: "cluster§1.4.8.2",
             details: "Indicates a list of fabric scoped information about scenes on this endpoint." +
                 "\n" +
                 "The number of list entries for this attribute shall NOT exceed the number of supported fabrics by " +
@@ -140,18 +131,15 @@ Resource.add({
                 },
                 {
                     tag: "field", name: "TransitionTime", xref: "cluster§1.4.9.5.4",
-                    details: "If the status is SUCCESS, this field shall be copied from the corresponding field in the Scene Table " +
-                        "entry, otherwise it shall be omitted."
+                    details: "This field shall be set to the corresponding field in the Scene Table entry."
                 },
                 {
                     tag: "field", name: "SceneName", xref: "cluster§1.4.9.5.5",
-                    details: "If the status is SUCCESS, this field shall be copied from the corresponding field in the Scene Table " +
-                        "entry, otherwise it shall be omitted."
+                    details: "This field shall be set to the corresponding field in the Scene Table entry."
                 },
                 {
                     tag: "field", name: "ExtensionFieldSetStructs", xref: "cluster§1.4.9.5.6",
-                    details: "If the status is SUCCESS, this field shall be copied from the corresponding field in the Scene Table " +
-                        "entry, otherwise it shall be omitted."
+                    details: "This field shall be set to the corresponding field in the Scene Table entry."
                 }
             ]
         },

package/src/standard/resources/semtag.resource.ts

@@ -9,14 +9,14 @@
 import { Resource } from "#models/Resource.js";
 
 Resource.add({
-    tag: "datatype", name: "semtag", description: "Semantic Tag", xref: "core§7.19.2.42",
+    tag: "datatype", name: "semtag", description: "Semantic Tag", xref: "core§7.19.2.46",
     details: "This data type shall be represented by the following structure:",
 
     children: [
         {
-            tag: "field", name: "MfgCode", xref: "core§7.19.2.42.1",
+            tag: "field", name: "MfgCode", xref: "core§7.19.2.46.1",
 
-            details: "If the MfgCode field is not null, it shall be the Vendor ID of the manufacturer who has defined a " +
+            details: "If the MfgCode field is not NULL, it shall be the Vendor ID of the manufacturer who has defined a " +
                 "certain namespace and the NamespaceID field shall be the ID of a namespace defined by the " +
                 "manufacturer identified in the MfgCode field." +
                 "\n" +
@@ -25,18 +25,18 @@ Resource.add({
                 "tag is a tag from a common namespace, a derived cluster namespace, or an applicable device-specific " +
                 "namespace." +
                 "\n" +
-                "If MfgCode is null, the NamespaceID field shall indicate a standard namespace."
+                "If MfgCode is NULL, the NamespaceID field shall indicate a standard namespace."
         },
 
         {
-            tag: "field", name: "NamespaceId", xref: "core§7.19.2.42.2",
+            tag: "field", name: "NamespaceId", xref: "core§7.19.2.46.2",
             details: "The NamespaceID field shall identify a namespace." +
                 "\n" +
                 "The common and device-specific semantic tag namespaces are listed in StandardNamespaces."
         },
 
         {
-            tag: "field", name: "Tag", xref: "core§7.19.2.42.3",
+            tag: "field", name: "Tag", xref: "core§7.19.2.46.3",
             details: "The Tag field shall be the ID of a semantic tag located within the namespace indicated by " +
                 "NamespaceID." +
                 "\n" +
@@ -45,12 +45,12 @@ Resource.add({
         },
 
         {
-            tag: "field", name: "Label", xref: "core§7.19.2.42.4",
+            tag: "field", name: "Label", xref: "core§7.19.2.46.4",
 
             details: "The Label field, if present, shall contain human-readable text suitable for display on a client. The " +
                 "content of the Label field is defined by the manufacturer." +
                 "\n" +
-                "This field shall be present when the MfgCode is not null. This field SHOULD NOT be used if the Tag " +
+                "This field shall be present when the MfgCode is not NULL. This field SHOULD NOT be used if the Tag " +
                 "is from a standard namespace, unless the Tag requires further qualification. For example: A Tag that " +
                 "has the meaning of \"room\" in a location namespace, would require the a label string to qualify the " +
                 "type of room, such as \"1\", \"2b\", \"Bathroom\", etc."