@matter/model 0.13.1-alpha.0-20250508-047aa0277 → 0.13.1-alpha.0-20250511-74ef153aa

package/src/standard/elements/EnergyEvse.ts

@@ -31,9 +31,8 @@ export const EnergyEvse = Cluster(
             "a single wire." +
             "\n" +
             "Power Line Communication (PLC) is supported by some EVSEs (e.g. for support of ISO 15118 in Europe " +
-            "and SAE J2931/4 in NA) and may enable features such as Vehicle to Grid (V2G) or Vehicle to" +
-            "\n" +
-            "Home (V2H) that allows for bi-directional charging/discharging of electric vehicles." +
+            "and SAE J2931/4 in NA) and may enable features such as Vehicle to Grid (V2G) or Vehicle to Home " +
+            "(V2H) that allows for bi-directional charging/discharging of electric vehicles." +
             "\n" +
             "More modern EVSE devices may optionally support ISO 15118-20 in Europe and SAE J2836/3 for NA to " +
             "support bi-directional charging (Vehicle to Grid - V2G) and Plug and Charge capabilities." +
@@ -43,15 +42,15 @@ export const EnergyEvse = Cluster(
             "\n" +
             "This cluster supports a safety mechanism that may lockout remote operation until the initial " +
             "latching conditions have been met. Some of the fault conditions defined in SAE J1772, such as " +
-            "Ground- Fault Circuit Interrupter (GFCI) or Charging Circuit Interrupting Device (CCID), may require " +
+            "Ground-Fault Circuit Interrupter (GFCI) or Charging Circuit Interrupting Device (CCID), may require " +
             "clearing by an operator by, for example, pressing a button on the equipment or breaker panel." +
             "\n" +
             "This EVSE cluster is written around support of a single EVSE. Having multiple EVSEs at home or a " +
             "business is managed by backend system and outside scope of this cluster." +
             "\n" +
             "Note that in many deployments the EVSE may be outside the home and may suffer from intermittent " +
-            "network connections (e.g. a weak WiFi signal). It also allows for a charging profile to be pre- " +
-            "configured, in case there is a temporary communications loss during a charging session.",
+            "network connections (e.g. a weak WiFi signal). It also allows for a charging profile to be " +
+            "pre-configured, in case there is a temporary communications loss during a charging session.",
 
         xref: { document: "cluster", section: "9.3" }
     },
@@ -154,14 +153,13 @@ export const EnergyEvse = Cluster(
             "The State attribute shall change when the EVSE detects change of condition of the EV (plugged in or " +
             "unplugged, whether the vehicle is asking for demand or not, and if it is charging or discharging)." +
             "\n" +
-            "NOTE" +
-            "\n" +
-            "SessionEnding is not really a state but a transition. However, the transition period may take a few " +
-            "seconds and is useful for some clean up purposes." +
+            "> [!NOTE]" +
             "\n" +
-            "The Fault state is used to indicate that the FaultState attribute is not NoError." +
+            "> SessionEnding is not really a state but a transition. However, the transition period may take a " +
+            "  few seconds and is useful for some clean up purposes." +
             "\n" +
-            "A null value shall indicate that the state cannot be determined.",
+            "The Fault state is used to indicate that the FaultState attribute is not NoError. A null value shall " +
+            "indicate that the state cannot be determined.",
 
         xref: { document: "cluster", section: "9.3.8.1" }
     }),
@@ -228,9 +226,8 @@ export const EnergyEvse = Cluster(
     Attribute({
         name: "MinimumChargeCurrent", id: 0x6, type: "amperage-mA", access: "R V", conformance: "M",
         constraint: "min 0", default: 6000, quality: "N",
-        details: "Indicates the minimum current that can be delivered by the EVSE to the EV." +
-            "\n" +
-            "The attribute can be set using the EnableCharging command.",
+        details: "Indicates the minimum current that can be delivered by the EVSE to the EV. The attribute can be set " +
+            "using the EnableCharging command.",
         xref: { document: "cluster", section: "9.3.8.7" }
     }),
 
@@ -289,10 +286,8 @@ export const EnergyEvse = Cluster(
             "\n" +
             "This attribute value shall be limited by the EVSE to be in the range of:" +
             "\n" +
-            "MinimumChargeCurrent <= UserMaximumChargeCurrent <= MaximumChargeCurrent" +
-            "\n" +
-            "where MinimumChargeCurrent and MaximumChargeCurrent are the values received in the EnableCharging " +
-            "command." +
+            "MinimumChargeCurrent <= UserMaximumChargeCurrent <= MaximumChargeCurrent where MinimumChargeCurrent " +
+            "and MaximumChargeCurrent are the values received in the EnableCharging command." +
             "\n" +
             "Its default value SHOULD be initialized to the same as the CircuitCapacity attribute. This value " +
             "shall be persisted across reboots to ensure it does not cause charging issues during temporary power " +
@@ -367,8 +362,7 @@ export const EnergyEvse = Cluster(
 
         details: "Indicates the target SoC the EVSE is going to attempt to reach when the vehicle is next charged." +
             "\n" +
-            "A null value indicates that there is no scheduled charging" +
-            "\n" +
+            "A null value indicates that there is no scheduled charging (for example, the EVSE Mode is set to use " +
             "Manual mode tag), or that the vehicle is not plugged in with the SupplyState indicating that " +
             "charging is enabled, or that the next ChargingTargetStruct is using the AddedEnergy value to charge " +
             "the vehicle." +
@@ -403,7 +397,7 @@ export const EnergyEvse = Cluster(
                 "\n" +
                 "ApproxEVEfficiency (km/kWh x 1000): 4800 (i.e. 4.8km/kWh x 1000)" +
                 "\n" +
-                "AddedEnergy (Wh): 10,000" +
+                "### AddedEnergy (Wh): 10,000" +
                 "\n" +
                 "AddedRange (km) = 10,000 x 4800 / 1,000,000 = 48 km" +
                 "\n" +
@@ -855,7 +849,7 @@ export const EnergyEvse = Cluster(
         }),
         Field({
             name: "SessionEnding", id: 0x5, conformance: "M",
-            description: "The EVSE is transitioning from any plugged- in state to NotPluggedIn"
+            description: "The EVSE is transitioning from any plugged-in state to NotPluggedIn"
         }),
         Field({ name: "Fault", id: 0x6, conformance: "M", description: "There is a fault (see FaultState attribute)" })
     ),
@@ -877,7 +871,7 @@ export const EnergyEvse = Cluster(
         }),
         Field({
             name: "DisabledDiagnostics", id: 0x4, conformance: "M",
-            description: "The EV is not currently allowed to charge or discharge due to self- diagnostics mode."
+            description: "The EV is not currently allowed to charge or discharge due to self-diagnostics mode."
         }),
         Field({
             name: "Enabled", id: 0x5, conformance: "[V2X]",
@@ -1016,9 +1010,8 @@ export const EnergyEvse = Cluster(
                 "  • the AddedEnergy field shall take precedence over the TargetSoC field, and if the EVSE does not " +
                 "    support the SOC feature then the TargetSoC field may only take the values null or 100%." +
                 "\n" +
-                "  • if the AddedEnergy field has not been provided, the EVSE SHOULD assume the vehicle is empty" +
-                "\n" +
-                "and charge until the vehicle stops demanding a charge.",
+                "  • if the AddedEnergy field has not been provided, the EVSE SHOULD assume the vehicle is empty and " +
+                "    charge until the vehicle stops demanding a charge.",
 
             xref: { document: "cluster", section: "9.3.7.6.2" }
         }),
@@ -1040,11 +1033,11 @@ export const EnergyEvse = Cluster(
                 "should be set based on typical battery size of the vehicles on the market (e.g. 70000Wh), however " +
                 "this is up to the client to carefully choose a value." +
                 "\n" +
-                "NOTE" +
+                "> [!NOTE]" +
                 "\n" +
-                "If the EVSE can obtain the Battery Capacity of the vehicle, it SHOULD NOT limit this AddedEnergy " +
-                "value to the Battery Capacity of the vehicle, since the EV may also require energy for heating and " +
-                "cooling of the battery during charging, or for heating or cooling the cabin.",
+                "> If the EVSE can obtain the Battery Capacity of the vehicle, it SHOULD NOT limit this AddedEnergy " +
+                "  value to the Battery Capacity of the vehicle, since the EV may also require energy for heating and " +
+                "  cooling of the battery during charging, or for heating or cooling the cabin.",
 
             xref: { document: "cluster", section: "9.3.7.6.3" }
         })

package/src/standard/elements/EnergyEvseMode.ts

@@ -38,8 +38,7 @@ export const EnergyEvseMode = Cluster(
         details: "At least one entry in the SupportedModes attribute shall include the Manual mode tag in the ModeTags " +
             "field list." +
             "\n" +
-            "Modes with entries in the SupportedModes attribute which contain multiple mode tags permitting" +
-            "\n" +
+            "Modes with entries in the SupportedModes attribute which contain multiple mode tags permitting " +
             "charging or discharging under different conditions shall permit the charging or discharging to occur " +
             "if any of the conditions are satisfied." +
             "\n" +
@@ -90,8 +89,7 @@ export const EnergyEvseMode = Cluster(
 
         Field({
             name: "SolarCharging", id: 0x4002,
-            details: "While in modes with this tag, and once enabled with the EnableCharging, the EVSE will attempt to" +
-                "\n" +
+            details: "While in modes with this tag, and once enabled with the EnableCharging, the EVSE will attempt to " +
                 "automatically start charging based on available excess solar PV generation, limiting the charging " +
                 "power to avoid importing energy from the grid.",
             xref: { document: "cluster", section: "9.4.7.1.3" }
@@ -104,11 +102,11 @@ export const EnergyEvseMode = Cluster(
                 "permit discharging based on the current charge state of the EV, and its control from an associated " +
                 "Device Energy Management cluster." +
                 "\n" +
-                "NOTE" +
+                "> [!NOTE]" +
                 "\n" +
-                "being in a mode with this tag set or not does not affect the handling of the EnableDischarging " +
-                "command by the Energy EVSE cluster, but once enabled, only modes with this tag enable the " +
-                "discharging to actually occur.",
+                "> being in a mode with this tag set or not does not affect the handling of the EnableDischarging " +
+                "  command by the Energy EVSE cluster, but once enabled, only modes with this tag enable the " +
+                "  discharging to actually occur.",
 
             xref: { document: "cluster", section: "9.4.7.1.4" }
         })

package/src/standard/elements/EnergyPreference.ts

@@ -17,12 +17,9 @@ import {
 export const EnergyPreference = Cluster(
     {
         name: "EnergyPreference", id: 0x9b, classification: "application", pics: "EPREF",
-        details: "This cluster provides an interface to specify preferences for how devices should consume energy." +
-            "\n" +
-            "NOTE Support for Energy Preference cluster is provisional.",
+        details: "This cluster provides an interface to specify preferences for how devices should consume energy.",
         xref: { document: "cluster", section: "9.7" }
     },
-
     Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 1 }),
 
     Attribute(
@@ -119,11 +116,15 @@ export const EnergyPreference = Cluster(
         {
             name: "LowPowerModeSensitivities", id: 0x3, type: "list", access: "R V", conformance: "LPMS",
             constraint: "2 to 10", quality: "F",
+
             details: "Indicates a list of BalanceStructs, each representing a condition or set of conditions for the " +
-                "device to enter a low power mode. This shall contain at least two BalanceStructs." +
+                "device to enter a low power mode." +
+                "\n" +
+                "This shall contain at least two BalanceStructs." +
                 "\n" +
                 "Each BalanceStruct shall have a Step field larger than the Step field on the previous BalanceStruct " +
                 "in the list.",
+
             xref: { document: "cluster", section: "9.7.6.4" }
         },
 

package/src/standard/elements/FeatureMap.ts

@@ -19,9 +19,7 @@ export const FeatureMap = Attribute({
         "features. A cluster feature is a set of cluster elements that are mandatory or optional for a " +
         "defined feature of the cluster. If a cluster feature is supported by the cluster instance, then the " +
         "corresponding bit shall be set to 1, otherwise the bit shall be set to 0 (zero). All undefined bits " +
-        "in" +
-        "\n" +
-        "this attribute shall be set to 0 (zero)." +
+        "in this attribute shall be set to 0 (zero)." +
         "\n" +
         "The set of cluster elements that are designated as mandatory (M) are implicitly part of the " +
         "mandatory cluster feature set, and do not have a bit in the FeatureMap attribute." +

package/src/standard/elements/FixedLabel.ts

@@ -28,12 +28,11 @@ export const FixedLabel = Cluster(
             "  • A manufacturer can use this to identify a characteristic of an endpoint. For example to identify " +
             "    the endpoints of a luminaire, one pointing up, the other pointing down, one of the endpoints " +
             "    would have a LabelList entry \"orientation\":\"up\" while the other would have \"orientation\":\"down\". " +
-            "    Using such indication, the user interface of a Node controlling this luminaire" +
+            "    Using such indication, the user interface of a Node controlling this luminaire knows which of " +
+            "    the endpoints is which of the lights." +
             "\n" +
-            "knows which of the endpoints is which of the lights." +
-            "\n" +
-            "Note that the TagList in the Descriptor cluster provides an alternative mechanism for such self- " +
-            "description using standardized tags rather than manufacturer-selected strings, yielding a " +
+            "Note that the TagList in the Descriptor cluster provides an alternative mechanism for such " +
+            "self-description using standardized tags rather than manufacturer-selected strings, yielding a " +
             "standardized mechanism for features defined in the various namespaces. The second example above can " +
             "be implemented using semantic tags Direction.Upward and Direction.Downward instead of (or in " +
             "addition to) the Fixed Label cluster.",

package/src/standard/elements/FlowMeasurement.ts

@@ -48,9 +48,8 @@ export const FlowMeasurement = Cluster(
     Attribute({
         name: "MaxMeasuredValue", id: 0x2, type: "uint16", access: "R V", conformance: "M",
         constraint: "min minMeasuredValue + 1", quality: "X",
-        details: "Indicates the maximum value of MeasuredValue that can be measured. See" +
-            "\n" +
-            "Measured Value for more details." +
+        details: "Indicates the maximum value of MeasuredValue that can be measured. See Measured Value for more " +
+            "details." +
             "\n" +
             "The null value indicates that the value is not available.",
         xref: { document: "cluster", section: "2.5.4.3" }

package/src/standard/elements/GeneralCommissioning.ts

@@ -31,7 +31,7 @@ export const GeneralCommissioning = Cluster(
     Attribute(
         { name: "FeatureMap", id: 0xfffc, type: "FeatureMap", xref: { document: "core", section: "11.10.4" } },
         Field({
-            name: "TC", conformance: "P", constraint: "0", description: "TermsAndConditions",
+            name: "TC", constraint: "0", description: "TermsAndConditions",
             details: "Supports Terms & Conditions acknowledgement"
         })
     ),
@@ -82,8 +82,7 @@ export const GeneralCommissioning = Cluster(
         details: "LocationCapability is statically set by the manufacturer and indicates if this Node needs to be told " +
             "an exact RegulatoryLocation. For example a Node which is \"Indoor Only\" would not be certified for " +
             "outdoor use at all, and thus there is no need for a commissioner to set or ask the user about " +
-            "whether the device will be used inside or outside. However a device which states its capability is" +
-            "\n" +
+            "whether the device will be used inside or outside. However a device which states its capability is " +
             "\"Indoor/Outdoor\" means it would like clarification if possible." +
             "\n" +
             "For Nodes without radio network interfaces (e.g. Ethernet-only devices), the value IndoorOutdoor " +
@@ -99,15 +98,14 @@ export const GeneralCommissioning = Cluster(
     Attribute({
         name: "SupportsConcurrentConnection", id: 0x4, type: "bool", access: "R V", conformance: "M",
         default: true, quality: "F",
-        details: "Indicates whether this device supports \"concurrent connection flow\" commissioning mode (see Section " +
-            "5.5, “Commissioning Flows”). If false, the device only supports \"non-concurrent connection flow\" " +
-            "mode.",
+        details: "This attribute shall indicate whether this device supports \"concurrent connection flow\" " +
+            "commissioning mode (see Section 5.5, “Commissioning Flows”). If false, the device only supports " +
+            "\"non-concurrent connection flow\" mode.",
         xref: { document: "core", section: "11.10.6.5" }
     }),
 
     Attribute({
-        name: "TcAcceptedVersion", id: 0x5, type: "uint16", access: "R A", conformance: "P, TC",
-        quality: "N",
+        name: "TcAcceptedVersion", id: 0x5, type: "uint16", access: "R A", conformance: "TC", quality: "N",
 
         details: "Indicates the last version of the T&Cs for which the device received user acknowledgements. On " +
             "factory reset this field shall be reset to 0." +
@@ -121,7 +119,7 @@ export const GeneralCommissioning = Cluster(
     }),
 
     Attribute({
-        name: "TcMinRequiredVersion", id: 0x6, type: "uint16", access: "R A", conformance: "P, TC",
+        name: "TcMinRequiredVersion", id: 0x6, type: "uint16", access: "R A", conformance: "TC",
         quality: "N",
 
         details: "Indicates the minimum version of the texts presented by the Enhanced Setup Flow that need to be " +
@@ -135,8 +133,7 @@ export const GeneralCommissioning = Cluster(
     }),
 
     Attribute({
-        name: "TcAcknowledgements", id: 0x7, type: "map16", access: "R A", conformance: "P, TC",
-        quality: "N",
+        name: "TcAcknowledgements", id: 0x7, type: "map16", access: "R A", conformance: "TC", quality: "N",
 
         details: "Indicates the user’s response to the presented terms. Each bit position corresponds to a user " +
             "response for the associated index of matching text, such that bit 0 (bit value 1) is for text index " +
@@ -153,7 +150,7 @@ export const GeneralCommissioning = Cluster(
     }),
 
     Attribute({
-        name: "TcAcknowledgementsRequired", id: 0x8, type: "bool", access: "R A", conformance: "P, TC",
+        name: "TcAcknowledgementsRequired", id: 0x8, type: "bool", access: "R A", conformance: "TC",
         default: true, quality: "N",
 
         details: "Indicates whether SetTCAcknowledgements is currently required to be called with the inclusion of " +
@@ -176,8 +173,7 @@ export const GeneralCommissioning = Cluster(
     }),
 
     Attribute({
-        name: "TcUpdateDeadline", id: 0x9, type: "uint32", access: "R A", conformance: "P, TC",
-        quality: "X N",
+        name: "TcUpdateDeadline", id: 0x9, type: "uint32", access: "R A", conformance: "TC", quality: "X N",
         details: "Indicates the System Time in seconds when any functionality limitations will begin due to a lack of " +
             "acceptance of updated Terms and Conditions, as described in Section 5.7.4.5, “Presenting Updated " +
             "Terms and Conditions”." +
@@ -216,7 +212,7 @@ export const GeneralCommissioning = Cluster(
                 "\n" +
                 "  • If ExpiryLengthSeconds is non-zero and the fail-safe timer was currently armed, and the " +
                 "    accessing Fabric matches the fail-safe context’s associated Fabric, then the fail-safe timer " +
-                "    shall be re- armed to expire in ExpiryLengthSeconds." +
+                "    shall be re-armed to expire in ExpiryLengthSeconds." +
                 "\n" +
                 "  • Otherwise, the command shall leave the current fail-safe state unchanged and immediately respond " +
                 "    with ArmFailSafeResponse containing an ErrorCode value of BusyWithOtherAdmin, indicating a " +
@@ -281,36 +277,36 @@ export const GeneralCommissioning = Cluster(
                 "following sequence of clean-up steps shall be executed, in order, by the receiver:" +
                 "\n" +
                 "  1. Terminate any open PASE secure session by clearing any associated Secure Session Context at the " +
-                "      Server." +
+                "     Server." +
                 "\n" +
                 "  2. Revoke the temporary administrative privileges granted to any open PASE session (see Section " +
-                "      6.6.2.9, “Bootstrapping of the Access Control Cluster”) at the Server." +
+                "     6.6.2.9, “Bootstrapping of the Access Control Cluster”) at the Server." +
                 "\n" +
                 "  3. If an AddNOC or UpdateNOC command has been successfully invoked, terminate all CASE sessions " +
-                "      associated with the Fabric whose Fabric Index is recorded in the Fail-Safe context (see " +
-                "      ArmFailSafe) by clearing any associated Secure Session Context at the Server." +
+                "     associated with the Fabric whose Fabric Index is recorded in the Fail-Safe context (see " +
+                "     ArmFailSafe) by clearing any associated Secure Session Context at the Server." +
                 "\n" +
                 "  4. Reset the configuration of all Network Commissioning Networks attribute to their state prior to " +
-                "      the Fail-Safe being armed." +
+                "     the Fail-Safe being armed." +
                 "\n" +
                 "  5. If an UpdateNOC command had been successfully invoked, revert the state of operational key " +
-                "      pair, NOC and ICAC for that Fabric to the state prior to the Fail-Safe timer being armed, for " +
-                "      the Fabric Index that was the subject of the UpdateNOC command." +
+                "     pair, NOC and ICAC for that Fabric to the state prior to the Fail-Safe timer being armed, for " +
+                "     the Fabric Index that was the subject of the UpdateNOC command." +
                 "\n" +
                 "  6. If an AddNOC command had been successfully invoked, achieve the equivalent effect of invoking " +
-                "      the RemoveFabric command against the Fabric Index stored in the Fail-Safe Context for the " +
-                "      Fabric Index that was the subject of the AddNOC command. This shall remove all associations to " +
-                "      that Fabric including all fabric-scoped data, and may possibly factory-reset the device " +
-                "      depending on current device state. This shall only apply to Fabrics added during the fail-safe " +
-                "      period as the result of the AddNOC command." +
+                "     the RemoveFabric command against the Fabric Index stored in the Fail-Safe Context for the " +
+                "     Fabric Index that was the subject of the AddNOC command. This shall remove all associations to " +
+                "     that Fabric including all fabric-scoped data, and may possibly factory-reset the device " +
+                "     depending on current device state. This shall only apply to Fabrics added during the fail-safe " +
+                "     period as the result of the AddNOC command." +
                 "\n" +
                 "  7. If the CSRRequest command had been successfully invoked, but no AddNOC or UpdateNOC command had " +
-                "      been successfully invoked, then the new operational key pair temporarily generated for the " +
-                "      purposes of NOC addition or update (see Node Operational CSR Procedure) shall be removed as it " +
-                "      is no longer needed." +
+                "     been successfully invoked, then the new operational key pair temporarily generated for the " +
+                "     purposes of NOC addition or update (see Node Operational CSR Procedure) shall be removed as it " +
+                "     is no longer needed." +
                 "\n" +
                 "  8. Remove any RCACs added by the AddTrustedRootCertificate command that are not currently " +
-                "      referenced by any entry in the Fabrics attribute." +
+                "     referenced by any entry in the Fabrics attribute." +
                 "\n" +
                 "  9. Reset the Breadcrumb attribute to zero." +
                 "\n" +
@@ -364,9 +360,8 @@ export const GeneralCommissioning = Cluster(
                 "still set the Location attribute reflected by the Basic Information Cluster configuration, but the " +
                 "SetRegulatoryConfigResponse replied shall have the ErrorCode field set to ValueOutsideRange error." +
                 "\n" +
-                "If the LocationCapability attribute is not Indoor/Outdoor and the NewRegulatoryConfig value" +
-                "\n" +
-                "received does not match either the Indoor or Outdoor fixed value in LocationCapability, then the " +
+                "If the LocationCapability attribute is not Indoor/Outdoor and the NewRegulatoryConfig value received " +
+                "does not match either the Indoor or Outdoor fixed value in LocationCapability, then the " +
                 "SetRegulatoryConfigResponse replied shall have the ErrorCode field set to ValueOutsideRange error " +
                 "and the RegulatoryConfig attribute and associated internal radio configuration shall remain " +
                 "unchanged." +
@@ -425,9 +420,8 @@ export const GeneralCommissioning = Cluster(
             "the Server is configured in a state such that it still has all necessary elements to be fully " +
             "operable within a Fabric, such as ACL entries (see Section 9.10, “Access Control Cluster”) and " +
             "operational credentials (see Section 6.4, “Node Operational Credentials Specification”), and that " +
-            "the Node is reachable using CASE" +
-            "\n" +
-            "(CASE)”) over an operational network." +
+            "the Node is reachable using CASE (see Section 4.14.2, “Certificate Authenticated Session " +
+            "Establishment (CASE)”) over an operational network." +
             "\n" +
             "An ErrorCode of NoFailSafe shall be responded to the invoker if the CommissioningComplete command " +
             "was received when no Fail-Safe context exists." +
@@ -500,7 +494,7 @@ export const GeneralCommissioning = Cluster(
 
     Command(
         {
-            name: "SetTcAcknowledgements", id: 0x6, access: "A", conformance: "P, TC", direction: "request",
+            name: "SetTcAcknowledgements", id: 0x6, access: "A", conformance: "TC", direction: "request",
             response: "SetTcAcknowledgementsResponse",
             details: "This command sets the user acknowledgements received in the Enhanced Setup Flow Terms & Conditions " +
                 "into the node.",
@@ -530,9 +524,7 @@ export const GeneralCommissioning = Cluster(
                 "This command shall result in success with an ErrorCode value of OK in the " +
                 "SetTCAcknowledgementsResponse if all required terms were accepted by the user. Specifically, all " +
                 "bits have a value of 1 in TCAcknowledgements whose ordinal is marked as required in the file located " +
-                "at EnhancedSe" +
-                "\n" +
-                "tupFlowTCUrl." +
+                "at EnhancedSetupFlowTCUrl." +
                 "\n" +
                 "If the TCVersion field is less than the TCMinRequiredVersion, then the ErrorCode of " +
                 "TCMinVersionNotMet shall be returned and TCAcknowledgements shall remain unchanged." +
@@ -547,7 +539,7 @@ export const GeneralCommissioning = Cluster(
 
     Command(
         {
-            name: "SetTcAcknowledgementsResponse", id: 0x7, conformance: "P, TC", direction: "response",
+            name: "SetTcAcknowledgementsResponse", id: 0x7, conformance: "TC", direction: "response",
             details: "This command is used to convey the result from SetTCAcknowledgements.",
             xref: { document: "core", section: "11.10.7.9" }
         },
@@ -573,15 +565,15 @@ export const GeneralCommissioning = Cluster(
         }),
         Field({
             name: "InvalidAuthentication", id: 0x2, conformance: "M",
-            description: "Executed CommissioningComplete outside CASE session."
+            description: "Executed CommissioningComplet e outside CASE session."
         }),
         Field({
             name: "NoFailSafe", id: 0x3, conformance: "M",
-            description: "Executed CommissioningComplete when there was no active Fail-Safe context."
+            description: "Executed CommissioningComplet e when there was no active Fail-Safe context."
         }),
         Field({
             name: "BusyWithOtherAdmin", id: 0x4, conformance: "M",
-            description: "Attempting to arm fail- safe or execute CommissioningComplete from a fabric different than the one associated with the current fail- safe context."
+            description: "Attempting to arm fail-safe or execute CommissioningComplet e from a fabric different than the one associated with the current fail-safe context."
         }),
         Field({
             name: "RequiredTcNotAccepted", id: 0x5, conformance: "TC",

package/src/standard/elements/GeneralDiagnostics.ts

@@ -97,8 +97,7 @@ export const GeneralDiagnostics = Cluster(
             details: "The ActiveHardwareFaults attribute shall indicate the set of faults currently detected by the Node. " +
                 "When the Node detects a fault has been raised, the appropriate HardwareFaultEnum value shall be " +
                 "added to this list. This list shall NOT contain more than one instance of a specific " +
-                "HardwareFaultEnum value. When the Node detects that all conditions contributing to a fault has been" +
-                "\n" +
+                "HardwareFaultEnum value. When the Node detects that all conditions contributing to a fault has been " +
                 "cleared, the corresponding HardwareFaultEnum value shall be removed from this list. An empty list " +
                 "shall indicate there are currently no active faults. The order of this list SHOULD have no " +
                 "significance. Clients interested in monitoring changes in active faults may subscribe to this " +
@@ -270,8 +269,8 @@ export const GeneralDiagnostics = Cluster(
             name: "TestEventTrigger", id: 0x0, access: "M", conformance: "M", direction: "request",
             response: "status",
 
-            details: "This command shall be supported to provide a means for certification tests to trigger some test- " +
-                "plan-specific events, necessary to assist in automation of device interactions for some " +
+            details: "This command shall be supported to provide a means for certification tests to trigger some " +
+                "test-plan-specific events, necessary to assist in automation of device interactions for some " +
                 "certification test cases. This command shall NOT cause any changes to the state of the device that " +
                 "persist after the last fabric is removed." +
                 "\n" +
@@ -313,8 +312,7 @@ export const GeneralDiagnostics = Cluster(
                 "Values of EventTrigger in the range 0xFFFF_FFFF_0000_0000 through 0xFFFF_FFFF_FFFF_FFFF are reserved " +
                 "for testing use by manufacturers and will not appear in CSA certification test literature." +
                 "\n" +
-                "If the value of EventTrigger received is not supported by the receiving Node, this command shall" +
-                "\n" +
+                "If the value of EventTrigger received is not supported by the receiving Node, this command shall " +
                 "fail with a status code of INVALID_COMMAND." +
                 "\n" +
                 "Otherwise, if the EnableKey value matches the configured internal value for a particular Node, and " +
@@ -418,7 +416,7 @@ export const GeneralDiagnostics = Cluster(
             details: "This field shall indicate the number of times to repeat the Value in the PayloadTestResponse’s " +
                 "Payload field." +
                 "\n" +
-                "Effect upon receipt" +
+                "### Effect upon receipt" +
                 "\n" +
                 "This command shall respond with a response status of CONSTRAINT_ERROR if either:" +
                 "\n" +
@@ -435,10 +433,9 @@ export const GeneralDiagnostics = Cluster(
                 "  • If Value is 0x55 and the Count is zero, then the PayloadTestResponse would have the Payload " +
                 "    field set to an empty octet string." +
                 "\n" +
-                "  • If Value is 0xA5 and the Count is 10, the PayloadTestResponse would have the Payload field set" +
-                "\n" +
-                "to a content whose hexadecimal representation would be A5A5A5A5A5A5A5A5A5A5, and base64 " +
-                "representation would be paWlpaWlpaWlpQ==.",
+                "  • If Value is 0xA5 and the Count is 10, the PayloadTestResponse would have the Payload field set " +
+                "    to a content whose hexadecimal representation would be A5A5A5A5A5A5A5A5A5A5, and base64 " +
+                "    representation would be paWlpaWlpaWlpQ==.",
 
             xref: { document: "core", section: "11.12.7.4.3" }
         })
@@ -521,7 +518,7 @@ export const GeneralDiagnostics = Cluster(
         }),
         Field({
             name: "ThreadFault", id: 0x3, conformance: "O",
-            description: "The Node has encountered a fault with its802.15.4 radio."
+            description: "The Node has encountered a fault with its 802.15.4 radio."
         }),
         Field({
             name: "NfcFault", id: 0x4, conformance: "O",
@@ -643,8 +640,7 @@ export const GeneralDiagnostics = Cluster(
 
         Field({
             name: "HardwareAddress", id: 0x4, type: "hwadr", conformance: "M",
-            details: "This field shall contain the current link-layer address for a 802.3 or IEEE 802.11-2020 network" +
-                "\n" +
+            details: "This field shall contain the current link-layer address for a 802.3 or IEEE 802.11-2020 network " +
                 "interface and contain the current extended MAC address for a 802.15.4 interface. The byte order of " +
                 "the octstr shall be in wire byte order. For addresses values less than 64 bits, the first two bytes " +
                 "shall be zero.",