@matter/model 0.13.0-alpha.0-20250318-c1aa38b08 → 0.13.0-alpha.0-20250323-770919c6a

package/src/standard/elements/PumpConfigurationAndControl.ts

@@ -75,8 +75,8 @@ export const PumpConfigurationAndControl = Cluster(
     Attribute({
         name: "MaxPressure", id: 0x0, type: "int16", access: "R V", conformance: "M", default: null,
         quality: "X F",
-        details: "This attribute specifies the maximum pressure the pump can achieve. It is a physical limit, and " +
-            "does not apply to any specific control mode or operation mode." +
+        details: "This attribute specifies the maximum pressure the pump can achieve. It is a physical limit, and does " +
+            "not apply to any specific control mode or operation mode." +
             "\n" +
             "Valid range is -3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
         xref: { document: "cluster", section: "4.2.7.1" }
@@ -95,8 +95,8 @@ export const PumpConfigurationAndControl = Cluster(
     Attribute({
         name: "MaxFlow", id: 0x2, type: "uint16", access: "R V", conformance: "M", default: null,
         quality: "X F",
-        details: "This attribute specifies the maximum flow the pump can achieve. It is a physical limit, and does " +
-            "not apply to any specific control mode or operation mode." +
+        details: "This attribute specifies the maximum flow the pump can achieve. It is a physical limit, and does not " +
+            "apply to any specific control mode or operation mode." +
             "\n" +
             "Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.",
         xref: { document: "cluster", section: "4.2.7.3" }
@@ -224,15 +224,15 @@ export const PumpConfigurationAndControl = Cluster(
         details: "This attribute specifies current effective operation mode of the pump as defined in " +
             "OperationModeEnum." +
             "\n" +
-            "The value of the EffectiveOperationMode attribute is the same as the OperationMode attribute, " +
-            "unless one of the following points are true:" +
+            "The value of the EffectiveOperationMode attribute is the same as the OperationMode attribute, unless " +
+            "one of the following points are true:" +
             "\n" +
             "  • The pump is physically set to run with the local settings" +
             "\n" +
             "  • The LocalOverride bit in the PumpStatus attribute is set," +
             "\n" +
-            "See OperationMode and ControlMode attributes for a detailed description of the operation and " +
-            "control of the pump.",
+            "See OperationMode and ControlMode attributes for a detailed description of the operation and control " +
+            "of the pump.",
 
         xref: { document: "cluster", section: "4.2.7.15" }
     }),
@@ -255,12 +255,11 @@ export const PumpConfigurationAndControl = Cluster(
             "    remote sensor is a pressure sensor, a flow sensor or a temperature sensor respectively, " +
             "    regardless of the value of the ControlMode attribute." +
             "\n" +
-            "In case the ControlMode attribute is not included on the device and no remote sensors are " +
-            "connected, the value of the EffectiveControlMode shall match the vendor-specific behavior of the " +
-            "pump." +
+            "In case the ControlMode attribute is not included on the device and no remote sensors are connected, " +
+            "the value of the EffectiveControlMode shall match the vendor-specific behavior of the pump." +
             "\n" +
-            "See OperationMode and ControlMode attributes for detailed a description of the operation and " +
-            "control of the pump.",
+            "See OperationMode and ControlMode attributes for detailed a description of the operation and control " +
+            "of the pump.",
 
         xref: { document: "cluster", section: "4.2.7.16" }
     }),
@@ -272,8 +271,8 @@ export const PumpConfigurationAndControl = Cluster(
         details: "This attribute specifies the actual capacity of the pump as a percentage of the effective maximum " +
             "setpoint value. It is updated dynamically as the speed of the pump changes." +
             "\n" +
-            "If the value is not available (the measurement or estimation of the speed is done in the pump), " +
-            "this attribute will indicate the null value." +
+            "If the value is not available (the measurement or estimation of the speed is done in the pump), this " +
+            "attribute will indicate the null value." +
             "\n" +
             "Valid range is 0 % to 163.835% (0.005 % granularity). Although this attribute is a signed value, " +
             "values of capacity less than zero have no physical meaning.",
@@ -288,8 +287,8 @@ export const PumpConfigurationAndControl = Cluster(
         details: "This attribute specifies the actual speed of the pump measured in RPM. It is updated dynamically as " +
             "the speed of the pump changes." +
             "\n" +
-            "If the value is not available (the measurement or estimation of the speed is done in the pump), " +
-            "this attribute will indicate the null value." +
+            "If the value is not available (the measurement or estimation of the speed is done in the pump), this " +
+            "attribute will indicate the null value." +
             "\n" +
             "Valid range is 0 to 65,534 RPM.",
 
@@ -301,12 +300,12 @@ export const PumpConfigurationAndControl = Cluster(
         default: 0, quality: "X N",
 
         details: "This attribute specifies the accumulated number of hours that the pump has been powered and the " +
-            "motor has been running. It is updated dynamically as it increases. It is preserved over power " +
-            "cycles of the pump. If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at " +
-            "0 (zero)." +
+            "motor has been running. It is updated dynamically as it increases. It is preserved over power cycles " +
+            "of the pump. If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at 0 " +
+            "(zero)." +
             "\n" +
-            "This attribute is writeable, in order to allow setting to an appropriate value after maintenance. " +
-            "If the value is not available, this attribute will indicate the null value." +
+            "This attribute is writeable, in order to allow setting to an appropriate value after maintenance. If " +
+            "the value is not available, this attribute will indicate the null value." +
             "\n" +
             "Valid range is 0 to 16,777,214 hrs.",
 
@@ -353,8 +352,8 @@ export const PumpConfigurationAndControl = Cluster(
         details: "This attribute specifies the operation mode of the pump as defined in OperationModeEnum." +
             "\n" +
             "The actual operating mode of the pump is a result of the setting of the attributes OperationMode, " +
-            "ControlMode and the optional connection of a remote sensor. The operation and control is " +
-            "prioritized as shown in the scheme below:" +
+            "ControlMode and the optional connection of a remote sensor. The operation and control is prioritized " +
+            "as shown in the scheme below:" +
             "\n" +
             "Priority Scheme of Pump Operation and Control" +
             "\n" +
@@ -369,8 +368,8 @@ export const PumpConfigurationAndControl = Cluster(
             "If this attribute is Normal and no remote sensor is connected, the control mode of the pump is " +
             "decided by the ControlMode attribute." +
             "\n" +
-            "OperationMode may be changed at any time, even when the pump is running. The behavior of the pump " +
-            "at the point of changing the value of this attribute is vendor-specific." +
+            "OperationMode may be changed at any time, even when the pump is running. The behavior of the pump at " +
+            "the point of changing the value of this attribute is vendor-specific." +
             "\n" +
             "In the case a device does not support a specific operation mode, the write interaction to this " +
             "attribute with an unsupported operation mode value shall be ignored and a response containing the " +
@@ -567,8 +566,8 @@ export const PumpConfigurationAndControl = Cluster(
             name: "ConstantPressure", id: 0x1, conformance: "PRSCONST",
             description: "The pump will regulate its speed to maintain a constant differential pressure over its flanges.",
             details: "The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. " +
-                "In case of the internal pressure sensor, this will be the range derived from the [MinConstPressure " +
-                "– MaxConstPressure] attributes. In case of a remote pressure sensor, this will be the range derived " +
+                "In case of the internal pressure sensor, this will be the range derived from the [MinConstPressure – " +
+                "MaxConstPressure] attributes. In case of a remote pressure sensor, this will be the range derived " +
                 "from the [MinMeasuredValue – MaxMeasuredValue] attributes of the remote pressure sensor.",
             xref: { document: "cluster", section: "4.2.6.3.2" }
         }),

package/src/standard/elements/PumpDT.ts

@@ -74,6 +74,6 @@ export const PumpDt = DeviceType(
         name: "OccupancySensing", id: 0x406, conformance: "O", element: "clientCluster",
         xref: { document: "device", section: "5.5.4" }
     })
-)
+);
 
 MatterDefinition.children.push(PumpDt);

package/src/standard/elements/RefrigeratorAlarm.ts

@@ -19,8 +19,8 @@ export const RefrigeratorAlarm = Cluster(
     {
         name: "RefrigeratorAlarm", id: 0x57, type: "AlarmBase", classification: "application",
         pics: "REFALM",
-        details: "This cluster is a derived cluster of Alarm Base cluster and provides the alarm definition related " +
-            "to refrigerator and temperature controlled cabinet devices.",
+        details: "This cluster is a derived cluster of Alarm Base cluster and provides the alarm definition related to " +
+            "refrigerator and temperature controlled cabinet devices.",
         xref: { document: "cluster", section: "8.8" }
     },
 

package/src/standard/elements/RefrigeratorAndTemperatureControlledCabinetMode.ts

@@ -74,6 +74,6 @@ export const RefrigeratorAndTemperatureControlledCabinetMode = Cluster(
             xref: { document: "cluster", section: "8.7.7.1.2" }
         })
     )
-)
+);
 
 MatterDefinition.children.push(RefrigeratorAndTemperatureControlledCabinetMode);

package/src/standard/elements/RefrigeratorNS.ts

@@ -15,8 +15,8 @@ import {
 export const RefrigeratorNs = SemanticNamespace(
     {
         name: "Refrigerator", id: 0x41,
-        details: "The tags contained in this namespace are restricted for use in the refrigerator domain and shall " +
-            "NOT be used in any other domain or context.",
+        details: "The tags contained in this namespace are restricted for use in the refrigerator domain and shall NOT " +
+            "be used in any other domain or context.",
         xref: { document: "namespace", section: "16" }
     },
 

package/src/standard/elements/RelativePositionNS.ts

@@ -16,10 +16,10 @@ export const RelativePositionNs = SemanticNamespace(
     {
         name: "RelativePosition", id: 0x12,
         details: "The tags contained in this namespace may be used in any domain or context, to indicate an " +
-            "association with a position relative to some reference, which must be specified by the user of " +
-            "these tags. For example, the position may be relative to a household item, such as a dining table, " +
-            "and the user of these tags must indicate that. Note the difference with Chapter 9, Common Position " +
-            "Semantic Tag Namespace, which contains tags indicating the position relative to the device.",
+            "association with a position relative to some reference, which must be specified by the user of these " +
+            "tags. For example, the position may be relative to a household item, such as a dining table, and the " +
+            "user of these tags must indicate that. Note the difference with Chapter 9, Common Position Semantic " +
+            "Tag Namespace, which contains tags indicating the position relative to the device.",
         xref: { document: "namespace", section: "11" }
     },
 

package/src/standard/elements/ResourceMonitoring.ts

@@ -107,8 +107,8 @@ export const ResourceMonitoring = Cluster(
         name: "ResetCondition", id: 0x0, access: "O", conformance: "O", direction: "request",
         response: "status",
         details: "Upon receipt, the device shall reset the Condition and ChangeIndicator attributes, indicating full " +
-            "resource availability and readiness for use, as initially configured. Invocation of this command " +
-            "may cause the LastChangedTime to be updated automatically based on the clock of the server, if the " +
+            "resource availability and readiness for use, as initially configured. Invocation of this command may " +
+            "cause the LastChangedTime to be updated automatically based on the clock of the server, if the " +
             "server supports setting the attribute.",
         xref: { document: "cluster", section: "2.8.7.1" }
     }),
@@ -148,8 +148,8 @@ export const ResourceMonitoring = Cluster(
     Datatype(
         {
             name: "ProductIdentifierTypeEnum", type: "enum8",
-            details: "Indicate the type of identifier used to describe the product. Devices SHOULD use " +
-                "globally-recognized IDs over OEM specific ones.",
+            details: "Indicate the type of identifier used to describe the product. Devices SHOULD use globally-recognized " +
+                "IDs over OEM specific ones.",
             xref: { document: "cluster", section: "2.8.5.3" }
         },
 

package/src/standard/elements/RoomAirConditionerDT.ts

@@ -14,8 +14,8 @@ export const RoomAirConditionerDt = DeviceType(
         name: "RoomAirConditioner", id: 0x72, category: "Appliances", classification: "simple",
         details: "This defines conformance to the Room Air Conditioner device type." +
             "\n" +
-            "A Room Air Conditioner is a device with the primary function of controlling the air temperature in " +
-            "a single room.",
+            "A Room Air Conditioner is a device with the primary function of controlling the air temperature in a " +
+            "single room.",
         xref: { document: "device", section: "13.3" }
     },
 

package/src/standard/elements/RootNodeDT.ts

@@ -17,9 +17,9 @@ export const RootNodeDt = DeviceType(
     {
         name: "RootNode", id: 0x16, category: "Utility", classification: "node",
 
-        details: "This defines conformance for a root node endpoint (see System Model specification). This endpoint " +
-            "is akin to a \"read me first\" endpoint that describes itself and the other endpoints that make up " +
-            "the node." +
+        details: "This defines conformance for a root node endpoint (see System Model specification). This endpoint is " +
+            "akin to a \"read me first\" endpoint that describes itself and the other endpoints that make up the " +
+            "node." +
             "\n" +
             "  • Device types with Endpoint scope shall NOT be supported on the same endpoint as this device " +
             "    type." +

package/src/standard/elements/RvcOperationalState.ts

@@ -43,8 +43,8 @@ export const RvcOperationalState = Cluster(
             "other effect." +
             "\n" +
             "A device that receives this command in any state which does not allow seeking the charger, such as " +
-            "Charging or Docked, shall respond with an OperationalCommandResponse command with an ErrorStateID " +
-            "of CommandInvalidInState and shall have no other effect." +
+            "Charging or Docked, shall respond with an OperationalCommandResponse command with an ErrorStateID of " +
+            "CommandInvalidInState and shall have no other effect." +
             "\n" +
             "Otherwise, on success:" +
             "\n" +
@@ -77,8 +77,8 @@ export const RvcOperationalState = Cluster(
                 "transitioned to those states while operating and can resume, such as, for example, if it is " +
                 "recharging while in a cleaning cycle. Else, if the operational state is Charging or Docked but " +
                 "there’s no operation to resume or the operation can’t be resumed, the device shall respond with an " +
-                "OperationalCommandResponse command with an ErrorStateID of CommandInvalidInState but take no " +
-                "further action.",
+                "OperationalCommandResponse command with an ErrorStateID of CommandInvalidInState but take no further " +
+                "action.",
 
             xref: { document: "cluster", section: "7.4.4.1" }
         },

package/src/standard/elements/RvcRunMode.ts

@@ -41,8 +41,8 @@ export const RvcRunMode = Cluster(
             "At least one entry in the SupportedModes attribute (different from the one above) shall include the " +
             "Cleaning mode tag in the ModeTags field." +
             "\n" +
-            "The Mapping, Cleaning, and Idle mode tags are mutually exclusive and shall NOT be used together in " +
-            "a mode’s ModeTags.",
+            "The Mapping, Cleaning, and Idle mode tags are mutually exclusive and shall NOT be used together in a " +
+            "mode’s ModeTags.",
 
         xref: { document: "cluster", section: "7.2.6.1" }
     }),
@@ -88,16 +88,16 @@ export const RvcRunMode = Cluster(
             details: "The device is not performing any of the main operations of the other modes. However, auxiliary " +
                 "actions, such as seeking the charger or charging, may occur." +
                 "\n" +
-                "For example, the device has completed cleaning, successfully or not, on its own or due to a " +
-                "command, or has not been asked to clean after a restart.",
+                "For example, the device has completed cleaning, successfully or not, on its own or due to a command, " +
+                "or has not been asked to clean after a restart.",
             xref: { document: "cluster", section: "7.2.7.2.1" }
         }),
 
         Field({
             name: "Cleaning", id: 0x4001,
             details: "The device was asked to clean so it may be actively running, or paused due to an error, due to a " +
-                "pause command, or for recharging etc. If currently paused and the device can resume it will " +
-                "continue to clean.",
+                "pause command, or for recharging etc. If currently paused and the device can resume it will continue " +
+                "to clean.",
             xref: { document: "cluster", section: "7.2.7.2.2" }
         }),
 

package/src/standard/elements/ScenesManagement.ts

@@ -20,8 +20,8 @@ export const ScenesManagement = Cluster(
         name: "ScenesManagement", id: 0x62, classification: "application", pics: "S",
 
         details: "The Scenes Management cluster provides attributes and commands for setting up and recalling scenes. " +
-            "Each scene corresponds to a set of stored values of specified attributes for one or more clusters " +
-            "on the same end point as the Scenes Management cluster." +
+            "Each scene corresponds to a set of stored values of specified attributes for one or more clusters on " +
+            "the same end point as the Scenes Management cluster." +
             "\n" +
             "In most cases scenes are associated with a particular group identifier. Scenes may also exist " +
             "without a group, in which case the value 0 replaces the group identifier. Note that extra care is " +
@@ -50,8 +50,8 @@ export const ScenesManagement = Cluster(
 
         details: "Indicates the Node ID of the node that last configured the Scene Table." +
             "\n" +
-            "The null value indicates that the server has not been configured, or that the identifier of the " +
-            "node that last configured the Scenes Management cluster is not known." +
+            "The null value indicates that the server has not been configured, or that the identifier of the node " +
+            "that last configured the Scenes Management cluster is not known." +
             "\n" +
             "The Node ID is scoped to the accessing fabric.",
 
@@ -88,8 +88,8 @@ export const ScenesManagement = Cluster(
             name: "AddScene", id: 0x0, access: "F M", conformance: "M", direction: "request",
             response: "AddSceneResponse",
             details: "It is not mandatory for an extension field set to be included in the command for every cluster on " +
-                "that endpoint that has a defined extension field set. Extension field sets may be omitted, " +
-                "including the case of no extension field sets at all.",
+                "that endpoint that has a defined extension field set. Extension field sets may be omitted, including " +
+                "the case of no extension field sets at all.",
             xref: { document: "cluster", section: "1.4.9.2" }
         },
 
@@ -116,7 +116,7 @@ export const ScenesManagement = Cluster(
 
         Field(
             {
-                name: "ExtensionFieldSetStructs", id: 0x4, type: "list", conformance: "M", constraint: "desc",
+                name: "ExtensionFieldSets", id: 0x4, type: "list", conformance: "M", constraint: "desc",
                 details: "This field shall contains the list of extension fields.",
                 xref: { document: "cluster", section: "1.4.9.2.5" }
             },
@@ -187,23 +187,23 @@ export const ScenesManagement = Cluster(
 
         Field({
             name: "TransitionTime", id: 0x3, type: "uint32", conformance: "desc", constraint: "max 60000000",
-            details: "If the status is SUCCESS, this field shall be copied from the corresponding field in the Scene " +
-                "Table entry, otherwise it shall be omitted.",
+            details: "If the status is SUCCESS, this field shall be copied from the corresponding field in the Scene Table " +
+                "entry, otherwise it shall be omitted.",
             xref: { document: "cluster", section: "1.4.9.5.4" }
         }),
 
         Field({
             name: "SceneName", id: 0x4, type: "string", conformance: "desc", constraint: "max 16",
-            details: "If the status is SUCCESS, this field shall be copied from the corresponding field in the Scene " +
-                "Table entry, otherwise it shall be omitted.",
+            details: "If the status is SUCCESS, this field shall be copied from the corresponding field in the Scene Table " +
+                "entry, otherwise it shall be omitted.",
             xref: { document: "cluster", section: "1.4.9.5.5" }
         }),
 
         Field(
             {
-                name: "ExtensionFieldSetStructs", id: 0x5, type: "list", conformance: "desc",
-                details: "If the status is SUCCESS, this field shall be copied from the corresponding field in the Scene " +
-                    "Table entry, otherwise it shall be omitted.",
+                name: "ExtensionFieldSets", id: 0x5, type: "list", conformance: "desc",
+                details: "If the status is SUCCESS, this field shall be copied from the corresponding field in the Scene Table " +
+                    "entry, otherwise it shall be omitted.",
                 xref: { document: "cluster", section: "1.4.9.5.6" }
             },
 
@@ -376,8 +376,8 @@ export const ScenesManagement = Cluster(
         Field({
             name: "Capacity", id: 0x1, type: "uint8", conformance: "M", quality: "X",
 
-            details: "This field shall contain the remaining capacity of the Scene Table of the server (for all groups " +
-                "for the accessing fabric). The following values apply:" +
+            details: "This field shall contain the remaining capacity of the Scene Table of the server (for all groups for " +
+                "the accessing fabric). The following values apply:" +
                 "\n" +
                 "  • 0 - No further scenes may be added." +
                 "\n" +
@@ -422,24 +422,24 @@ export const ScenesManagement = Cluster(
             details: "This field shall contain the information of how the scene copy is to proceed." +
                 "\n" +
                 "The CopyAllScenes bit of the Mode indicates whether all scenes are to be copied. If this value is " +
-                "set to 1, all scenes are to be copied and the SceneIdentifierFrom and SceneIdentifierTo fields " +
-                "shall be ignored. Otherwise this bit is set to 0.",
+                "set to 1, all scenes are to be copied and the SceneIdentifierFrom and SceneIdentifierTo fields shall " +
+                "be ignored. Otherwise this bit is set to 0.",
             xref: { document: "cluster", section: "1.4.9.15.1" }
         }),
 
         Field({
             name: "GroupIdentifierFrom", id: 0x1, type: "group-id", conformance: "M",
-            details: "This field shall indicate the identifier of the group from which the scene is to be copied. " +
-                "Together with the SceneIdentifierFrom field, this field uniquely identifies the scene to copy from " +
-                "the Scene Table.",
+            details: "This field shall indicate the identifier of the group from which the scene is to be copied. Together " +
+                "with the SceneIdentifierFrom field, this field uniquely identifies the scene to copy from the Scene " +
+                "Table.",
             xref: { document: "cluster", section: "1.4.9.15.2" }
         }),
 
         Field({
             name: "SceneIdentifierFrom", id: 0x2, type: "uint8", conformance: "M", constraint: "max 254",
-            details: "This field shall indicate the identifier of the scene from which the scene is to be copied. " +
-                "Together with the GroupIdentifierFrom field, this field uniquely identifies the scene to copy from " +
-                "the Scene Table.",
+            details: "This field shall indicate the identifier of the scene from which the scene is to be copied. Together " +
+                "with the GroupIdentifierFrom field, this field uniquely identifies the scene to copy from the Scene " +
+                "Table.",
             xref: { document: "cluster", section: "1.4.9.15.3" }
         }),
 
@@ -531,8 +531,8 @@ export const ScenesManagement = Cluster(
                 "regardless of the fabric-scoped access quality of the command." +
                 "\n" +
                 "In the event where the SceneValid field is set to False for a fabric, the CurrentScene and " +
-                "CurrentGroup fields shall be the last invoked scene and group for that fabric. In the event where " +
-                "no scene was previously invoked for that fabric, the CurrentScene and CurrentGroup fields shall be " +
+                "CurrentGroup fields shall be the last invoked scene and group for that fabric. In the event where no " +
+                "scene was previously invoked for that fabric, the CurrentScene and CurrentGroup fields shall be " +
                 "their default values.",
 
             xref: { document: "cluster", section: "1.4.7.2.4" }
@@ -572,8 +572,8 @@ export const ScenesManagement = Cluster(
                 "### 1.4.7.3.2. ValueUnsigned8, ValueSigned8, ValueUnsigned16, ValueSigned16, ValueUnsigned32, " +
                 "ValueSigned32, ValueUnsigned64, ValueSigned64 Fields" +
                 "\n" +
-                "These fields shall indicate the attribute value as part of an extension field set, associated with " +
-                "a given AttributeID under an ExtensionFieldSetStruct’s ClusterID. Which of the fields is used shall" +
+                "These fields shall indicate the attribute value as part of an extension field set, associated with a " +
+                "given AttributeID under an ExtensionFieldSetStruct’s ClusterID. Which of the fields is used shall" +
                 "\n" +
                 "be determined by the type of the attribute indicated by AttributeID as follows:" +
                 "\n" +
@@ -624,8 +624,8 @@ export const ScenesManagement = Cluster(
                 "\n" +
                 "    ◦ ValueUnsigned16 of 0xAB12 would be used as-is, as it is in range." +
                 "\n" +
-                "    ◦ ValueUnsigned16 of 0xFF80 is outside of the range allowed for attribute CurrentX, and would " +
-                "      be saturated to the closest valid value, which is the maximum of the attribute’s constraint " +
+                "    ◦ ValueUnsigned16 of 0xFF80 is outside of the range allowed for attribute CurrentX, and would be " +
+                "      saturated to the closest valid value, which is the maximum of the attribute’s constraint " +
                 "      range: 0xFEFF." +
                 "\n" +
                 "  • LevelControl cluster CurrentLevel (AttributeID 0x0000) has a type of uint8 and is nullable." +
@@ -686,8 +686,8 @@ export const ScenesManagement = Cluster(
                 "Though the Scene Table is defined here using the data model architecture rules and format, the " +
                 "design is not normative." +
                 "\n" +
-                "The Scene table is logically a list of fabric-scoped structs. The logical fields of each Scene " +
-                "Table entry struct are illustrated below. An ExtensionFieldSetStruct may be present for each " +
+                "The Scene table is logically a list of fabric-scoped structs. The logical fields of each Scene Table " +
+                "entry struct are illustrated below. An ExtensionFieldSetStruct may be present for each " +
                 "Scenes-supporting cluster implemented on the same endpoint.",
 
             xref: { document: "cluster", section: "1.4.7.5" }
@@ -695,8 +695,8 @@ export const ScenesManagement = Cluster(
 
         Field({
             name: "SceneGroupId", id: 0x0, type: "group-id", conformance: "M",
-            details: "This field is the group identifier for which this scene applies, or 0 if the scene is not " +
-                "associated with a group.",
+            details: "This field is the group identifier for which this scene applies, or 0 if the scene is not associated " +
+                "with a group.",
             xref: { document: "cluster", section: "1.4.7.5.1" }
         }),
 

package/src/standard/elements/SecondaryNetworkInterfaceDT.ts

@@ -13,8 +13,8 @@ export const SecondaryNetworkInterfaceDt = DeviceType(
     {
         name: "SecondaryNetworkInterface", id: 0x19, category: "Utility", classification: "utility",
 
-        details: "A Secondary Network Interface device provides an additional network interface supported by the " +
-            "Node, supplementing the primary interface hosted by the Root Node endpoint." +
+        details: "A Secondary Network Interface device provides an additional network interface supported by the Node, " +
+            "supplementing the primary interface hosted by the Root Node endpoint." +
             "\n" +
             "A Node supporting multiple network interfaces shall include the primary interface on the Root Node " +
             "endpoint, along with secondary interfaces on other endpoints. The priorities of these network " +