@matter/model 0.13.0-alpha.0-20250304-d4a7592a4 → 0.13.0-alpha.0-20250307-ebf84a05a

package/src/standard/elements/SmokeCoAlarm.ts

@@ -260,9 +260,8 @@ export const SmokeCoAlarm = Cluster(
 
         details: "This command shall initiate a device self-test. The return status shall indicate whether the test " +
             "was successfully initiated. Only one SelfTestRequest may be processed at a time. When the value of " +
-            "the ExpressedState attribute is any of SmokeAlarm, COAlarm, Testing, InterconnectSmoke, Inter" +
-            "\n" +
-            "connectCO, the device shall NOT execute the self-test, and shall return status code BUSY." +
+            "the ExpressedState attribute is any of SmokeAlarm, COAlarm, Testing, InterconnectSmoke, " +
+            "InterconnectCO, the device shall NOT execute the self-test, and shall return status code BUSY." +
             "\n" +
             "Upon successful acceptance of SelfTestRequest, the TestInProgress attribute shall be set to True " +
             "and ExpressedState attribute shall be set to Testing. Any faults identified during the test shall " +
@@ -304,12 +303,12 @@ export const SmokeCoAlarm = Cluster(
     ),
 
     Datatype(
-        { name: "ExpressedStateEnum", type: "enum8", xref: { document: "cluster", section: "2.11.5.3" } },
-        Field({
-            name: "Normal", id: 0x0, conformance: "M", description: "Nominal state, the device is not alarming",
+        {
+            name: "ExpressedStateEnum", type: "enum8",
             details: "This value shall indicate that this alarm is not alarming.",
-            xref: { document: "cluster", section: "2.11.5.3.1" }
-        }),
+            xref: { document: "cluster", section: "2.11.5.3" }
+        },
+        Field({ name: "Normal", id: 0x0, conformance: "M", description: "Nominal state, the device is not alarming" }),
 
         Field({
             name: "SmokeAlarm", id: 0x1, conformance: "SMOKE", description: "Smoke Alarm state",
@@ -410,15 +409,14 @@ export const SmokeCoAlarm = Cluster(
     ),
 
     Datatype(
-        { name: "ContaminationStateEnum", type: "enum8", xref: { document: "cluster", section: "2.11.5.6" } },
-
-        Field({
-            name: "Normal", id: 0x0, conformance: "M",
-            description: "Nominal state, the sensor is not contaminated",
+        {
+            name: "ContaminationStateEnum", type: "enum8",
             details: "This value shall indicate that the smoke sensor has nominal contamination levels, no customer " +
                 "action is required.",
-            xref: { document: "cluster", section: "2.11.5.6.1" }
-        }),
+            xref: { document: "cluster", section: "2.11.5.6" }
+        },
+
+        Field({ name: "Normal", id: 0x0, conformance: "M", description: "Nominal state, the sensor is not contaminated" }),
 
         Field({
             name: "Low", id: 0x1, conformance: "O", description: "Low contamination",

package/src/standard/elements/SoftwareVersionCertificationStatusEnum.ts

@@ -14,7 +14,7 @@ export const SoftwareVersionCertificationStatusEnum = Datatype(
         name: "SoftwareVersionCertificationStatusEnum", type: "enum8",
         details: "The values 0 through 2 shall correspond to the values 0 through 2 used in certification_type in the " +
             "Certification Declaration.",
-        xref: { document: "core", section: "11.23.7.2" }
+        xref: { document: "core", section: "11.23.8.2" }
     },
 
     Field({

package/src/standard/elements/SolarPowerDT.ts

@@ -0,0 +1,31 @@
+/**
+ * @license
+ * Copyright 2022-2025 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+
+import { MatterDefinition } from "../MatterDefinition.js";
+import { DeviceTypeElement as DeviceType, RequirementElement as Requirement } from "../../elements/index.js";
+
+export const SolarPowerDt = DeviceType(
+    {
+        name: "SolarPower", id: 0x17, category: "Energy", classification: "simple",
+        details: "A Solar Power device is a device that allows a solar panel array, which can optionally be comprised " +
+            "of a set parallel strings of solar panels, and its associated controller and, if appropriate, " +
+            "inverter, to be monitored and controlled by an Energy Management System.",
+        xref: { document: "device", section: "14.3" }
+    },
+
+    Requirement(
+        { name: "Descriptor", id: 0x1d, element: "serverCluster" },
+        Requirement({ name: "DeviceTypeList", default: [ { deviceType: 23, revision: 1 } ], element: "attribute" })
+    ),
+    Requirement({
+        name: "Identify", id: 0x3, conformance: "O", element: "serverCluster",
+        xref: { document: "device", section: "14.3.6" }
+    })
+);
+
+MatterDefinition.children.push(SolarPowerDt);

package/src/standard/elements/Switch.ts

@@ -34,43 +34,50 @@ export const Switch = Cluster(
         xref: { document: "cluster", section: "1.13" }
     },
 
-    Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 1 }),
+    Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 2 }),
 
     Attribute(
         { name: "FeatureMap", id: 0xfffc, type: "FeatureMap", xref: { document: "cluster", section: "1.13.4" } },
         Field({
             name: "LS", conformance: "O.a", constraint: "0", description: "LatchingSwitch",
-            details: "This feature is for a switch that maintains its position after being pressed (or turned).",
+            details: "This feature flag is for a switch that maintains its position after being pressed (or turned).",
             xref: { document: "cluster", section: "1.13.4.1" }
         }),
 
         Field({
             name: "MS", conformance: "O.a", constraint: "1", description: "MomentarySwitch",
-            details: "This feature is for a switch that does not maintain its position after being pressed (or turned). " +
-                "After releasing, it goes back to its idle position.",
+            details: "This feature flag is for a switch that does not maintain its position after being pressed (or " +
+                "turned). After releasing, it goes back to its idle position.",
             xref: { document: "cluster", section: "1.13.4.2" }
         }),
 
         Field({
-            name: "MSR", conformance: "[MS]", constraint: "2", description: "MomentarySwitchRelease",
-            details: "This feature is for a momentary switch that can distinguish and report release events. When this " +
-                "feature flag MSR is present, MS shall be present as well.",
+            name: "MSR", conformance: "[MS & !AS]", constraint: "2", description: "MomentarySwitchRelease",
+            details: "This feature flag is for a momentary switch that can distinguish and report release events.",
             xref: { document: "cluster", section: "1.13.4.3" }
         }),
 
         Field({
-            name: "MSL", conformance: "[MS & MSR]", constraint: "3", description: "MomentarySwitchLongPress",
-            details: "This feature is for a momentary switch that can distinguish and report long presses from short " +
-                "presses. When this feature flag MSL is present, MS and MSR shall be present as well.",
+            name: "MSL", conformance: "[MS & (MSR | AS)]", constraint: "3",
+            description: "MomentarySwitchLongPress",
+            details: "This feature flag is for a momentary switch that can distinguish and report long presses from short " +
+                "presses.",
             xref: { document: "cluster", section: "1.13.4.4" }
         }),
 
         Field({
-            name: "MSM", conformance: "[MS & MSR]", constraint: "4", description: "MomentarySwitchMultiPress",
-            details: "This feature is for a momentary switch that can distinguish and report double press and potentially " +
-                "multiple presses with more events, such as triple press, etc. When this feature flag MSM is " +
-                "present, MS and MSR shall be present as well.",
+            name: "MSM", conformance: "AS, [MS & MSR]", constraint: "4",
+            description: "MomentarySwitchMultiPress",
+            details: "This feature flag is for a momentary switch that can distinguish and report double press and " +
+                "potentially multiple presses with more events, such as triple press, etc.",
             xref: { document: "cluster", section: "1.13.4.5" }
+        }),
+
+        Field({
+            name: "AS", conformance: "[MS]", constraint: "5", description: "ActionSwitch",
+            details: "This feature flag indicates simplified handling of events for multi-press-capable switches. See " +
+                "Multi Press Details.",
+            xref: { document: "cluster", section: "1.13.4.6" }
         })
     ),
 
@@ -84,8 +91,9 @@ export const Switch = Cluster(
 
     Attribute({
         name: "CurrentPosition", id: 0x1, type: "uint8", access: "R V", conformance: "M",
-        constraint: "max numberOfPositions1", default: 0, quality: "N",
-        details: "Indicates the position of the switch. The valid range is zero to NumberOfPositions-1. " +
+        constraint: "max numberOfPositions - 1", default: 0, quality: "N",
+        details: "Indicates the position of the switch. The valid range is zero to NumberOfPositions - 1." +
+            "\n" +
             "CurrentPosition value 0 shall be assigned to the default position of the switch: for example the " +
             "\"open\" state of a rocker switch, or the \"idle\" state of a push button switch.",
         xref: { document: "cluster", section: "1.13.5.2" }
@@ -94,9 +102,30 @@ export const Switch = Cluster(
     Attribute({
         name: "MultiPressMax", id: 0x2, type: "uint8", access: "R V", conformance: "MSM",
         constraint: "min 2", default: 2, quality: "F",
+
         details: "Indicates how many consecutive presses can be detected and reported by a momentary switch which " +
-            "supports multi-press (e.g. it will report the value 3 if it can detect single press, double press " +
-            "and triple press, but not quad press and beyond).",
+            "supports multi-press (MSM feature flag set)." +
+            "\n" +
+            "For example, a momentary switch supporting single press, double press and triple press, but not " +
+            "quad press and beyond, would return the value 3." +
+            "\n" +
+            "When more than MultiPressMax presses are detected within a multi-press sequence:" +
+            "\n" +
+            "  • The server for cluster revision < 2 SHOULD generate a MultiPressComplete event with the " +
+            "    TotalNumberOfPressesCounted field set to the value of the MultiPressMax attribute, and avoid " +
+            "    generating any further InitialPress and MultiPressOngoing events until the switch has become " +
+            "    fully idle (i.e. no longer in the process of counting presses within the multipress)." +
+            "\n" +
+            "  • The server for cluster revision >= 2 shall generate a MultiPressComplete event with the " +
+            "    TotalNumberOfPressesCounted field set to zero (indicating an aborted sequence), and shall NOT " +
+            "    generate any further InitialPress and MultiPressOngoing events until the switch has become " +
+            "    fully idle (i.e. no longer in the process of counting presses within the multipress)." +
+            "\n" +
+            "This approach avoids unintentionally causing intermediate actions where there is a very long " +
+            "sequence of presses beyond MultiPressMax that may be taken in account specially by switches (e.g. " +
+            "to trigger special behavior such as factory reset for which generating events towards the client is " +
+            "not appropriate).",
+
         xref: { document: "cluster", section: "1.13.5.3" }
     }),
 
@@ -110,7 +139,7 @@ export const Switch = Cluster(
 
         Field({
             name: "NewPosition", id: 0x0, type: "uint8", conformance: "M",
-            constraint: "0 to numberOfPositions1",
+            constraint: "0 to numberOfPositions - 1",
             details: "This field shall indicate the new value of the CurrentPosition attribute, i.e. after the move.",
             xref: { document: "cluster", section: "1.13.6.1.1" }
         })
@@ -125,7 +154,7 @@ export const Switch = Cluster(
 
         Field({
             name: "NewPosition", id: 0x0, type: "uint8", conformance: "M",
-            constraint: "0 to numberOfPositions1",
+            constraint: "0 to numberOfPositions - 1",
             details: "This field shall indicate the new value of the CurrentPosition attribute, i.e. while pressed.",
             xref: { document: "cluster", section: "1.13.6.2.1" }
         })
@@ -134,14 +163,46 @@ export const Switch = Cluster(
     Event(
         {
             name: "LongPress", id: 0x2, access: "V", conformance: "MSL", priority: "info",
-            details: "This event shall be generated, when the momentary switch has been pressed for a \"long\" time (this " +
-                "time interval is manufacturer determined (e.g. since it depends on the switch physics)).",
+
+            details: "This event shall be generated when the momentary switch has been pressed for a \"long\" time. The " +
+                "time interval constituting a \"long\" time is manufacturer-determined, since it depends on the switch " +
+                "physics." +
+                "\n" +
+                "  • When the AS feature flag is set, this event:" +
+                "\n" +
+                "    ◦ shall NOT be generated during a multi-press sequence (since a long press is a separate cycle " +
+                "      from any multi-press cycles);" +
+                "\n" +
+                "    ◦ shall only be generated after the first InitialPress following a MultiPressComplete when a " +
+                "      long press is detected after the idle time." +
+                "\n" +
+                "  • Else, when the MSM feature flag is set, this event:" +
+                "\n" +
+                "    ◦ shall NOT be generated during a multi-press sequence (since a long press is a separate cycle " +
+                "      from any multi-press cycles);" +
+                "\n" +
+                "    ◦ shall only be generated after the first InitialPress following a MultiPressComplete when a " +
+                "      long press is detected after the idle time;" +
+                "\n" +
+                "    ◦ shall NOT be generated after a MultiPressOngoing event without an intervening " +
+                "      MultiPressComplete event." +
+                "\n" +
+                "The above constraints imply that for a given activity detection cycle of a switch having MSM and/or " +
+                "MSL feature flags set, the entire activity is either a single long press detection cycle of " +
+                "(InitialPress, LongPress, LongRelease), or a single multi-press detection cycle (ending in " +
+                "MultiPressComplete), where presses that would otherwise be reported as long presses are instead " +
+                "reported as a counted press in the MultiPressComplete event, and as InitialPress/ShortRelease pairs " +
+                "otherwise (where applicable)." +
+                "\n" +
+                "The rationale for this constraint is the ambiguity of interpretation of events when mixing long " +
+                "presses and multi-press events.",
+
             xref: { document: "cluster", section: "1.13.6.3" }
         },
 
         Field({
             name: "NewPosition", id: 0x0, type: "uint8", conformance: "M",
-            constraint: "0 to numberOfPositions1",
+            constraint: "0 to numberOfPositions - 1",
             details: "This field shall indicate the new value of the CurrentPosition attribute, i.e. while pressed.",
             xref: { document: "cluster", section: "1.13.6.3.1" }
         })
@@ -151,14 +212,20 @@ export const Switch = Cluster(
         {
             name: "ShortRelease", id: 0x3, access: "V", conformance: "MSR", priority: "info",
 
-            details: "This event shall be generated, when the momentary switch has been released (after debouncing)." +
+            details: "If the server has the Action Switch (AS) feature flag set, this event shall NOT be generated at " +
+                "all, since setting the Action Switch feature flag forbids the Momentary Switch ShortRelease (MSR) " +
+                "feature flag from being set. Otherwise, the following paragraphs describe the situations where this " +
+                "event is generated." +
+                "\n" +
+                "This event shall be generated, when the momentary switch has been released (after debouncing)." +
                 "\n" +
-                "  • If the server supports the Momentary Switch LongPress (MSL) feature, this event shall be " +
-                "    generated when the switch is released if no LongPress event had been generated since the " +
+                "  • If the server has the Momentary Switch LongPress (MSL) feature flag set, then this event shall " +
+                "    be generated when the switch is released if no LongPress event had been generated since the " +
                 "    previous InitialPress event." +
                 "\n" +
-                "  • If the server does not support the Momentary Switch LongPress (MSL) feature, this event shall " +
-                "    be generated when the switch is released - even when the switch was pressed for a long time." +
+                "  • If the server does not have the Momentary Switch LongPress (MSL) feature flag set, this event " +
+                "    shall be generated when the switch is released - even when the switch was pressed for a long " +
+                "    time." +
                 "\n" +
                 "  • Also see Section 1.13.7, “Sequence of generated events”.",
 
@@ -167,7 +234,7 @@ export const Switch = Cluster(
 
         Field({
             name: "PreviousPosition", id: 0x0, type: "uint8", conformance: "M",
-            constraint: "0 to numberOfPositions1",
+            constraint: "0 to numberOfPositions - 1",
             details: "This field shall indicate the previous value of the CurrentPosition attribute, i.e. just prior to " +
                 "release.",
             xref: { document: "cluster", section: "1.13.6.4.1" }
@@ -186,7 +253,7 @@ export const Switch = Cluster(
 
         Field({
             name: "PreviousPosition", id: 0x0, type: "uint8", conformance: "M",
-            constraint: "0 to numberOfPositions1",
+            constraint: "0 to numberOfPositions - 1",
             details: "This field shall indicate the previous value of the CurrentPosition attribute, i.e. just prior to " +
                 "release.",
             xref: { document: "cluster", section: "1.13.6.5.1" }
@@ -195,15 +262,18 @@ export const Switch = Cluster(
 
     Event(
         {
-            name: "MultiPressOngoing", id: 0x5, access: "V", conformance: "MSM", priority: "info",
-            details: "This event shall be generated to indicate how many times the momentary switch has been pressed in a " +
+            name: "MultiPressOngoing", id: 0x5, access: "V", conformance: "MSM & !AS", priority: "info",
+            details: "If the server has the Action Switch (AS) feature flag set, this event shall NOT be generated at " +
+                "all. Otherwise, the following paragraphs describe the situations where this event is generated." +
+                "\n" +
+                "This event shall be generated to indicate how many times the momentary switch has been pressed in a " +
                 "multi-press sequence, during that sequence. See Multi Press Details below.",
             xref: { document: "cluster", section: "1.13.6.6" }
         },
 
         Field({
             name: "NewPosition", id: 0x0, type: "uint8", conformance: "M",
-            constraint: "0 to numberOfPositions1",
+            constraint: "0 to numberOfPositions - 1",
             details: "This field shall indicate the new value of the CurrentPosition attribute, i.e. while pressed.",
             xref: { document: "cluster", section: "1.13.6.6.1" }
         }),
@@ -237,9 +307,11 @@ export const Switch = Cluster(
                 "\n" +
                 "The TotalNumberOfPressesCounted field shall contain:" +
                 "\n" +
-                "  • a value of 1 when there was one press in a multi-press sequence (and the sequence has ended)," +
+                "  • a value of 0 when there was an aborted multi-press sequence, where the number of presses goes " +
+                "    beyond MultiPressMax presses," +
                 "\n" +
-                "    i.e. there was no double press (or more)," +
+                "  • a value of 1 when there was exactly one press in a multi-press sequence (and the sequence has " +
+                "    ended), i.e. there was no double press (or more)," +
                 "\n" +
                 "  • a value of 2 when there were exactly two presses in a multi-press sequence (and the sequence " +
                 "    has ended)," +
@@ -248,15 +320,26 @@ export const Switch = Cluster(
                 "    has ended)," +
                 "\n" +
                 "  • a value of N when there were exactly N presses in a multi-press sequence (and the sequence has " +
-                "    ended).",
+                "    ended)." +
+                "\n" +
+                "NOTE" +
+                "\n" +
+                "The introduction of TotalNumberOfPressesCounted supporting the value 0 may impact clients of " +
+                "switches using cluster revision 1 since such servers would not use this value of " +
+                "TotalNumberOfPressesCounted to indicate an aborted sequence. Clients SHOULD always act using the " +
+                "TotalNumberOfPressesCounted field taken into account since for values from 1 to MultiPressMax, the " +
+                "user action that led to the event was different depending on the count.",
 
             xref: { document: "cluster", section: "1.13.6.7" }
         },
 
-        Field({ name: "PreviousPosition", id: 0x0, type: "uint8", conformance: "M", constraint: "0 to numberOfPositions1" }),
+        Field({
+            name: "PreviousPosition", id: 0x0, type: "uint8", conformance: "M",
+            constraint: "0 to numberOfPositions - 1"
+        }),
         Field({
             name: "TotalNumberOfPressesCounted", id: 0x1, type: "uint8", conformance: "M",
-            constraint: "1 to multiPressMax"
+            constraint: "max multiPressMax"
         })
     )
 );

package/src/standard/elements/SwitchesNS.ts

@@ -25,7 +25,7 @@ export const SwitchesNs = SemanticNamespace(
             "Position Namespace and the Common Number Namespace in the Generic Switch device type section in the " +
             "Device Library.",
 
-        xref: { document: "namespace", section: "15" }
+        xref: { document: "namespace", section: "18" }
     },
 
     SemanticTag({ name: "On", id: 0x0 }),
@@ -42,7 +42,7 @@ export const SwitchesNs = SemanticNamespace(
         details: "When this value is used, the Label field in the same Semantic Tag structure shall be filled with a " +
             "textual description of the function indicated on the button, such as a label or icon printed on the " +
             "button, e.g. \"dining\".",
-        xref: { document: "namespace", section: "15.1" }
+        xref: { document: "namespace", section: "18.1" }
     })
 );
 

package/src/standard/elements/TargetNavigator.ts

@@ -42,7 +42,7 @@ export const TargetNavigator = Cluster(
         {
             name: "TargetList", id: 0x0, type: "list", access: "R V", conformance: "M",
             details: "Indicates a list of targets that can be navigated to within the experience presented to the user by " +
-                "the Endpoint (Video Player or Content App). The list shall not contain any entries with the same " +
+                "the Endpoint (Video Player or Content App). The list shall NOT contain any entries with the same " +
                 "Identifier in the TargetInfoStruct object.",
             xref: { document: "cluster", section: "6.11.5.1" }
         },
@@ -111,7 +111,7 @@ export const TargetNavigator = Cluster(
             xref: { document: "cluster", section: "6.11.6.2.1" }
         }),
         Field({
-            name: "Data", id: 0x1, type: "string", conformance: "O",
+            name: "Data", id: 0x1, type: "string", conformance: "O", constraint: "any",
             details: "This field shall indicate Optional app-specific data.",
             xref: { document: "cluster", section: "6.11.6.2.2" }
         })

package/src/standard/elements/TemperatureControl.ts

@@ -70,7 +70,7 @@ export const TemperatureControl = Cluster(
 
     Attribute({
         name: "MinTemperature", id: 0x1, type: "temperature", access: "R V", conformance: "TN",
-        constraint: "max (MaxTemperature - 1)", quality: "F",
+        constraint: "max maxTemperature - 1", quality: "F",
         details: "Indicates the minimum temperature to which the TemperatureSetpoint attribute may be set.",
         xref: { document: "cluster", section: "8.2.5.2" }
     }),
@@ -90,7 +90,7 @@ export const TemperatureControl = Cluster(
 
     Attribute({
         name: "Step", id: 0x3, type: "temperature", access: "R V", conformance: "STEP",
-        constraint: "max (MaxTemperature - MinTemperature)", quality: "F",
+        constraint: "max maxTemperature - minTemperature", quality: "F",
 
         details: "Indicates the discrete value by which the TemperatureSetpoint attribute can be changed via the " +
             "SetTemperature command." +
@@ -104,7 +104,7 @@ export const TemperatureControl = Cluster(
 
     Attribute({
         name: "SelectedTemperatureLevel", id: 0x4, type: "uint8", access: "R V", conformance: "TL",
-        constraint: "0 to 31",
+        constraint: "max 31",
         details: "Indicates the currently selected temperature level setting of the server. This attribute shall be " +
             "the positional index of the list item in the SupportedTemperatureLevels list that represents the " +
             "currently selected temperature level setting of the server.",

package/src/standard/elements/TemperatureControlledCabinetDT.ts

@@ -26,7 +26,7 @@ export const TemperatureControlledCabinetDt = DeviceType(
 
     Requirement(
         { name: "Descriptor", id: 0x1d, element: "serverCluster" },
-        Requirement({ name: "DeviceTypeList", default: [ { deviceType: 113, revision: 2 } ], element: "attribute" })
+        Requirement({ name: "DeviceTypeList", default: [ { deviceType: 113, revision: 3 } ], element: "attribute" })
     ),
     Requirement({
         name: "TemperatureControl", id: 0x56, conformance: "M", element: "serverCluster",

package/src/standard/elements/TemperatureMeasurement.ts

@@ -28,7 +28,7 @@ export const TemperatureMeasurement = Cluster(
 
     Attribute({
         name: "MinMeasuredValue", id: 0x1, type: "temperature", access: "R V", conformance: "M",
-        constraint: "-27315 to maxMeasuredValue1", default: -27315, quality: "X",
+        constraint: "-27315 to maxMeasuredValue - 1", default: -27315, quality: "X",
         details: "Indicates the minimum value of MeasuredValue that is capable of being measured. See Measured Value " +
             "for more details." +
             "\n" +
@@ -38,7 +38,7 @@ export const TemperatureMeasurement = Cluster(
 
     Attribute({
         name: "MaxMeasuredValue", id: 0x2, type: "temperature", access: "R V", conformance: "M",
-        constraint: "minMeasuredValue1 to 32767", default: 32767, quality: "X",
+        constraint: "minMeasuredValue + 1 to 32767", default: 32767, quality: "X",
         details: "This attribute indicates the maximum value of MeasuredValue that is capable of being measured. See " +
             "Measured Value for more details." +
             "\n" +
@@ -47,8 +47,8 @@ export const TemperatureMeasurement = Cluster(
     }),
 
     Attribute({
-        name: "Tolerance", id: 0x3, type: "uint16", access: "R V", conformance: "O",
-        constraint: "0 to 2048", default: 0,
+        name: "Tolerance", id: 0x3, type: "uint16", access: "R V", conformance: "O", constraint: "max 2048",
+        default: 0,
         details: "See Measured Value.",
         xref: { document: "cluster", section: "2.3.4.4" }
     })