@matter/model 0.11.9-alpha.0-20241205-ccf69a00a → 0.11.9-alpha.0-20241207-b604cfa44

package/dist/cjs/standard/elements/WindowCovering.js

@@ -28,394 +28,372 @@ var import_elements = require("../../elements/index.js");
  * Copyright 2022-2024 Matter.js Authors
  * SPDX-License-Identifier: Apache-2.0
  */
-const WindowCovering = (0, import_elements.ClusterElement)({
-  name: "WindowCovering",
-  id: 258,
-  classification: "application",
-  pics: "WNCV",
-  details: "The window covering cluster provides an interface for controlling and adjusting automatic window coverings such as drapery motors, automatic shades, curtains and blinds.",
-  xref: { document: "cluster", section: "5.3" },
-  children: [
-    (0, import_elements.AttributeElement)({ name: "ClusterRevision", id: 65533, type: "ClusterRevision", default: 5 }),
-    (0, import_elements.AttributeElement)({
-      name: "FeatureMap",
-      id: 65532,
-      type: "FeatureMap",
-      xref: { document: "cluster", section: "5.3.4" },
-      children: [
-        (0, import_elements.FieldElement)({
-          name: "LF",
-          conformance: "O.a+",
-          constraint: "0",
-          description: "Lift",
-          details: "The Lift feature applies to window coverings that lift up and down (e.g. for a roller shade, Up and Down is lift Open and Close) or slide left to right (e.g. for a sliding curtain, Left and Right is lift Open and Close).",
-          xref: { document: "cluster", section: "5.3.4.1" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "TL",
-          conformance: "O.a+",
-          constraint: "1",
-          description: "Tilt",
-          details: "The Tilt feature applies to window coverings with vertical or horizontal strips.",
-          xref: { document: "cluster", section: "5.3.4.2" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "PA_LF",
-          conformance: "[LF]",
-          constraint: "2",
-          description: "PositionAwareLift",
-          details: "Position aware lift control is supported."
-        }),
-        (0, import_elements.FieldElement)({
-          name: "ABS",
-          conformance: "O",
-          constraint: "3",
-          description: "AbsolutePosition",
-          details: "The percentage attributes shall indicate the position as a percentage between the InstalledOpenLimits and InstalledClosedLimits attributes of the window covering starting at the open (0.00%).\nAs a general rule, absolute positioning (in centimeters or tenth of a degrees) SHOULD NOT be supported for new implementations.",
-          xref: { document: "cluster", section: "5.3.4.4" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "PA_TL",
-          conformance: "[TL]",
-          constraint: "4",
-          description: "PositionAwareTilt",
-          details: "Position aware tilt control is supported."
-        })
-      ]
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "Type",
-      id: 0,
-      type: "TypeEnum",
-      access: "R V",
-      conformance: "M",
-      constraint: "desc",
-      default: 0,
-      quality: "F",
-      details: "This attribute shall identify the type of window covering.",
-      xref: { document: "cluster", section: "5.3.6.2" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "PhysicalClosedLimitLift",
-      id: 1,
-      type: "uint16",
-      access: "R V",
-      conformance: "[LF & PA_LF & ABS]",
-      default: 0,
-      quality: "F",
-      details: "Indicates the maximum possible encoder position possible (Unit cm, centimeters) to position the height of the window covering lift.",
-      xref: { document: "cluster", section: "5.3.6.3" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "PhysicalClosedLimitTilt",
-      id: 2,
-      type: "uint16",
-      access: "R V",
-      conformance: "[TL & PA_TL & ABS]",
-      default: 0,
-      quality: "F",
-      details: "Indicates the maximum possible encoder position possible (Unit 0.1\xB0, tenths of a degree) to position the angle of the window covering tilt.",
-      xref: { document: "cluster", section: "5.3.6.4" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "CurrentPositionLift",
-      id: 3,
-      type: "uint16",
-      access: "R V",
-      conformance: "[LF & PA_LF & ABS]",
-      constraint: "installedOpenLimitLift to installedClosedLimitLift",
-      default: null,
-      quality: "X N",
-      details: "Indicates the actual lift position (Unit cm, centimeters) of the window covering from the fully-open position.",
-      xref: { document: "cluster", section: "5.3.6.5" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "CurrentPositionTilt",
-      id: 4,
-      type: "uint16",
-      access: "R V",
-      conformance: "[TL & PA_TL & ABS]",
-      constraint: "installedOpenLimitTilt to installedClosedLimitTilt",
-      default: null,
-      quality: "X N",
-      details: "Indicates the actual tilt position (Unit 0.1\xB0, tenths of a degree) of the window covering from the fully-open position.",
-      xref: { document: "cluster", section: "5.3.6.6" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "NumberOfActuationsLift",
-      id: 5,
-      type: "uint16",
-      access: "R V",
+const WindowCovering = (0, import_elements.ClusterElement)(
+  {
+    name: "WindowCovering",
+    id: 258,
+    classification: "application",
+    pics: "WNCV",
+    details: "The window covering cluster provides an interface for controlling and adjusting automatic window coverings such as drapery motors, automatic shades, curtains and blinds.",
+    xref: { document: "cluster", section: "5.3" }
+  },
+  (0, import_elements.AttributeElement)({ name: "ClusterRevision", id: 65533, type: "ClusterRevision", default: 5 }),
+  (0, import_elements.AttributeElement)(
+    { name: "FeatureMap", id: 65532, type: "FeatureMap", xref: { document: "cluster", section: "5.3.4" } },
+    (0, import_elements.FieldElement)({
+      name: "LF",
+      conformance: "O.a+",
+      constraint: "0",
+      description: "Lift",
+      details: "The Lift feature applies to window coverings that lift up and down (e.g. for a roller shade, Up and Down is lift Open and Close) or slide left to right (e.g. for a sliding curtain, Left and Right is lift Open and Close).",
+      xref: { document: "cluster", section: "5.3.4.1" }
+    }),
+    (0, import_elements.FieldElement)({
+      name: "TL",
+      conformance: "O.a+",
+      constraint: "1",
+      description: "Tilt",
+      details: "The Tilt feature applies to window coverings with vertical or horizontal strips.",
+      xref: { document: "cluster", section: "5.3.4.2" }
+    }),
+    (0, import_elements.FieldElement)({
+      name: "PA_LF",
       conformance: "[LF]",
-      default: 0,
-      quality: "N",
-      details: "Indicates the total number of lift/slide actuations applied to the window covering since the device was installed.",
-      xref: { document: "cluster", section: "5.3.6.7" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "NumberOfActuationsTilt",
-      id: 6,
-      type: "uint16",
-      access: "R V",
-      conformance: "[TL]",
-      default: 0,
-      quality: "N",
-      details: "Indicates the total number of tilt actuations applied to the window covering since the device was installed.",
-      xref: { document: "cluster", section: "5.3.6.8" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "ConfigStatus",
-      id: 7,
-      type: "ConfigStatusBitmap",
-      access: "R V",
-      conformance: "M",
-      constraint: "desc",
-      quality: "N",
-      details: "This attribute specifies the configuration and status information of the window covering.\nTo change settings, devices shall write to the Mode attribute. The behavior causing the setting or clearing of each bit is vendor specific.",
-      xref: { document: "cluster", section: "5.3.6.9" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "CurrentPositionLiftPercentage",
-      id: 8,
-      type: "percent",
-      access: "R V",
-      conformance: "[LF & PA_LF]",
-      default: null,
-      quality: "X N S P",
-      details: "Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute is equal to CurrentPositionLiftPercent100ths attribute divided by 100.",
-      xref: { document: "cluster", section: "5.3.6.12" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "CurrentPositionTiltPercentage",
-      id: 9,
-      type: "percent",
-      access: "R V",
-      conformance: "[TL & PA_TL]",
-      constraint: "0 to 100",
-      default: null,
-      quality: "X N S P",
-      details: "Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute is equal to CurrentPositionTiltPercent100ths attribute divided by 100.",
-      xref: { document: "cluster", section: "5.3.6.13" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "OperationalStatus",
-      id: 10,
-      type: "OperationalStatusBitmap",
-      access: "R V",
-      conformance: "M",
-      default: 0,
-      quality: "P",
-      details: "Indicates the currently ongoing operations and applies to all type of devices.",
-      xref: { document: "cluster", section: "5.3.6.16" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "TargetPositionLiftPercent100ths",
-      id: 11,
-      type: "percent100ths",
-      access: "R V",
-      conformance: "LF & PA_LF",
-      default: null,
-      quality: "X S P",
-      details: "Indicates the position where the window covering lift will go or is moving to as a percentage (Unit 0.01%).",
-      xref: { document: "cluster", section: "5.3.6.14" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "TargetPositionTiltPercent100ths",
-      id: 12,
-      type: "percent100ths",
-      access: "R V",
-      conformance: "TL & PA_TL",
-      default: null,
-      quality: "X S P",
-      details: "Indicates the position where the window covering tilt will go or is moving to as a percentage (Unit 0.01%).",
-      xref: { document: "cluster", section: "5.3.6.15" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "EndProductType",
-      id: 13,
-      type: "EndProductTypeEnum",
-      access: "R V",
-      conformance: "M",
-      constraint: "desc",
-      default: 0,
-      quality: "F",
-      details: "This attribute SHOULD provide more detail about the product type than can be determined from the main category indicated by the Type attribute.\nThe table below helps to match the EndProductType attribute with the Type attribute.",
-      xref: { document: "cluster", section: "5.3.6.17" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "CurrentPositionLiftPercent100ths",
-      id: 14,
-      type: "percent100ths",
-      access: "R V",
-      conformance: "LF & PA_LF",
-      constraint: "0 to 10000",
-      default: null,
-      quality: "X N P",
-      details: "Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals 100.00%.",
-      xref: { document: "cluster", section: "5.3.6.10" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "CurrentPositionTiltPercent100ths",
-      id: 15,
-      type: "percent100ths",
-      access: "R V",
-      conformance: "TL & PA_TL",
-      constraint: "0 to 10000",
-      default: null,
-      quality: "X N P",
-      details: "Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals 100.00%.",
-      xref: { document: "cluster", section: "5.3.6.11" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "InstalledOpenLimitLift",
-      id: 16,
-      type: "uint16",
-      access: "R V",
-      conformance: "LF & PA_LF & ABS",
-      constraint: "0 to 65534",
-      default: 0,
-      quality: "N",
-      details: "Indicates the open limit for lifting the window covering whether position (in centimeters) is encoded or timed.",
-      xref: { document: "cluster", section: "5.3.6.18" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "InstalledClosedLimitLift",
-      id: 17,
-      type: "uint16",
-      access: "R V",
-      conformance: "LF & PA_LF & ABS",
-      constraint: "0 to 65534",
-      default: 65534,
-      quality: "N",
-      details: "Indicates the closed limit for lifting the window covering whether position (in centimeters) is encoded or timed.",
-      xref: { document: "cluster", section: "5.3.6.19" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "InstalledOpenLimitTilt",
-      id: 18,
-      type: "uint16",
-      access: "R V",
-      conformance: "TL & PA_TL & ABS",
-      constraint: "0 to 65534",
-      default: 0,
-      quality: "N",
-      details: "Indicates the open limit for tilting the window covering whether position (in tenth of a degree) is encoded or timed.",
-      xref: { document: "cluster", section: "5.3.6.20" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "InstalledClosedLimitTilt",
-      id: 19,
-      type: "uint16",
-      access: "R V",
-      conformance: "TL & PA_TL & ABS",
-      constraint: "0 to 65534",
-      default: 65534,
-      quality: "N",
-      details: "Indicates the closed limit for tilting the window covering whether position (in tenth of a degree) is encoded or timed.",
-      xref: { document: "cluster", section: "5.3.6.21" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "VelocityLift",
-      id: 20,
-      conformance: "D",
-      xref: { document: "cluster", section: "5.3.6" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "AccelerationTimeLift",
-      id: 21,
-      conformance: "D",
-      xref: { document: "cluster", section: "5.3.6" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "DecelerationTimeLift",
-      id: 22,
-      conformance: "D",
-      xref: { document: "cluster", section: "5.3.6" }
+      constraint: "2",
+      description: "PositionAwareLift",
+      details: "Position aware lift control is supported."
     }),
-    (0, import_elements.AttributeElement)({
-      name: "Mode",
-      id: 23,
-      type: "ModeBitmap",
-      access: "RW VM",
-      conformance: "M",
-      default: 0,
-      quality: "N",
-      details: "The Mode attribute allows configuration of the window covering, such as: reversing the motor direction, placing the window covering into calibration mode, placing the motor into maintenance mode, disabling the network, and disabling status LEDs.\nIn the case a device does not support or implement a specific mode, e.g. the device has a specific installation method and reversal is not relevant or the device does not include a maintenance mode, any write interaction to the Mode attribute, with an unsupported mode bit or any out of bounds bits set, must be ignored and a response containing the status of CONSTRAINT_ERROR will be returned.",
-      xref: { document: "cluster", section: "5.3.6.22" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "IntermediateSetpointsLift",
-      id: 24,
-      conformance: "D",
-      xref: { document: "cluster", section: "5.3.6" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "IntermediateSetpointsTilt",
-      id: 25,
-      conformance: "D",
-      xref: { document: "cluster", section: "5.3.6" }
-    }),
-    (0, import_elements.AttributeElement)({
-      name: "SafetyStatus",
-      id: 26,
-      type: "SafetyStatusBitmap",
-      access: "R V",
+    (0, import_elements.FieldElement)({
+      name: "ABS",
       conformance: "O",
-      constraint: "desc",
-      default: 0,
-      quality: "P",
-      details: "The SafetyStatus attribute reflects the state of the safety sensors and the common issues preventing movements. By default for nominal operation all flags are cleared (0). A device might support none, one or several bit flags from this attribute (all optional).",
-      xref: { document: "cluster", section: "5.3.6.23" }
-    }),
-    (0, import_elements.CommandElement)({
-      name: "UpOrOpen",
-      id: 0,
-      access: "O",
-      conformance: "M",
-      direction: "request",
-      response: "status",
-      details: "Upon receipt of this command, the window covering will adjust its position so the physical lift/slide and tilt is at the maximum open/up position. This will happen as fast as possible. The server attributes shall be updated as follows:\nif the PositionAware feature is supported:\n  \u2022 TargetPositionLiftPercent100ths attribute shall be set to 0.00%.\n  \u2022 TargetPositionTiltPercent100ths attribute shall be set to 0.00%.\nThe server positioning attributes will follow the movements, once the movement has successfully finished, the server attributes shall be updated as follows:\nif the PositionAware feature is supported:\n  \u2022 CurrentPositionLiftPercent100ths attribute shall be 0.00%.\n  \u2022 CurrentPositionLiftPercentage attribute shall be 0%.\n  \u2022 CurrentPositionTiltPercent100ths attribute shall be 0.00%.\n  \u2022 CurrentPositionTiltPercentage attribute shall be 0%. if the AbsolutePosition feature is     supported:\n  \u2022 CurrentPositionLift attribute shall be equal to the InstalledOpenLimitLift attribute.\n  \u2022 CurrentPositionTilt attribute shall be equal to the InstalledOpenLimitTilt attribute.",
-      xref: { document: "cluster", section: "5.3.7.1" }
-    }),
-    (0, import_elements.CommandElement)({
-      name: "DownOrClose",
-      id: 1,
-      access: "O",
-      conformance: "M",
-      direction: "request",
-      response: "status",
-      details: "Upon receipt of this command, the window covering will adjust its position so the physical lift/slide and tilt is at the maximum closed/down position. This will happen as fast as possible. The server attributes supported shall be updated as follows:\nif the PositionAware feature is supported:\n  \u2022 TargetPositionLiftPercent100ths attribute shall be set to 100.00%.\n  \u2022 TargetPositionTiltPercent100ths attribute shall be set to 100.00%.\nThe server positioning attributes will follow the movements, once the movement has successfully finished, the server attributes shall be updated as follows:\nif the PositionAware feature is supported:\n  \u2022 CurrentPositionLiftPercent100ths attribute shall be 100.00%.\n  \u2022 CurrentPositionLiftPercentage attribute shall be 100%.\n  \u2022 CurrentPositionTiltPercent100ths attribute shall be 100.00%.\n  \u2022 CurrentPositionTiltPercentage attribute shall be 100%. if the AbsolutePosition feature is     supported:\n  \u2022 CurrentPositionLift attribute shall be equal to the InstalledClosedLimitLift attribute.\n  \u2022 CurrentPositionTilt attribute shall be equal to the InstalledClosedLimitTilt attribute.",
-      xref: { document: "cluster", section: "5.3.7.2" }
-    }),
-    (0, import_elements.CommandElement)({
-      name: "StopMotion",
-      id: 2,
-      access: "O",
-      conformance: "M",
-      direction: "request",
-      response: "status",
-      details: "Upon receipt of this command, the window covering will stop any adjusting to the physical tilt and lift/slide that is currently occurring. The server attributes supported shall be updated as follows:\n  \u2022 TargetPositionLiftPercent100ths attribute will be set to CurrentPositionLiftPercent100ths     attribute value.\n  \u2022 TargetPositionTiltPercent100ths attribute will be set to CurrentPositionTiltPercent100ths     attribute value.",
-      xref: { document: "cluster", section: "5.3.7.3" }
+      constraint: "3",
+      description: "AbsolutePosition",
+      details: "The percentage attributes shall indicate the position as a percentage between the InstalledOpenLimits and InstalledClosedLimits attributes of the window covering starting at the open (0.00%).\nAs a general rule, absolute positioning (in centimeters or tenth of a degrees) SHOULD NOT be supported for new implementations.",
+      xref: { document: "cluster", section: "5.3.4.4" }
     }),
-    (0, import_elements.CommandElement)({
+    (0, import_elements.FieldElement)({
+      name: "PA_TL",
+      conformance: "[TL]",
+      constraint: "4",
+      description: "PositionAwareTilt",
+      details: "Position aware tilt control is supported."
+    })
+  ),
+  (0, import_elements.AttributeElement)({
+    name: "Type",
+    id: 0,
+    type: "TypeEnum",
+    access: "R V",
+    conformance: "M",
+    constraint: "desc",
+    default: 0,
+    quality: "F",
+    details: "This attribute shall identify the type of window covering.",
+    xref: { document: "cluster", section: "5.3.6.2" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "PhysicalClosedLimitLift",
+    id: 1,
+    type: "uint16",
+    access: "R V",
+    conformance: "[LF & PA_LF & ABS]",
+    default: 0,
+    quality: "F",
+    details: "Indicates the maximum possible encoder position possible (Unit cm, centimeters) to position the height of the window covering lift.",
+    xref: { document: "cluster", section: "5.3.6.3" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "PhysicalClosedLimitTilt",
+    id: 2,
+    type: "uint16",
+    access: "R V",
+    conformance: "[TL & PA_TL & ABS]",
+    default: 0,
+    quality: "F",
+    details: "Indicates the maximum possible encoder position possible (Unit 0.1\xB0, tenths of a degree) to position the angle of the window covering tilt.",
+    xref: { document: "cluster", section: "5.3.6.4" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "CurrentPositionLift",
+    id: 3,
+    type: "uint16",
+    access: "R V",
+    conformance: "[LF & PA_LF & ABS]",
+    constraint: "installedOpenLimitLift to installedClosedLimitLift",
+    default: null,
+    quality: "X N",
+    details: "Indicates the actual lift position (Unit cm, centimeters) of the window covering from the fully-open position.",
+    xref: { document: "cluster", section: "5.3.6.5" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "CurrentPositionTilt",
+    id: 4,
+    type: "uint16",
+    access: "R V",
+    conformance: "[TL & PA_TL & ABS]",
+    constraint: "installedOpenLimitTilt to installedClosedLimitTilt",
+    default: null,
+    quality: "X N",
+    details: "Indicates the actual tilt position (Unit 0.1\xB0, tenths of a degree) of the window covering from the fully-open position.",
+    xref: { document: "cluster", section: "5.3.6.6" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "NumberOfActuationsLift",
+    id: 5,
+    type: "uint16",
+    access: "R V",
+    conformance: "[LF]",
+    default: 0,
+    quality: "N",
+    details: "Indicates the total number of lift/slide actuations applied to the window covering since the device was installed.",
+    xref: { document: "cluster", section: "5.3.6.7" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "NumberOfActuationsTilt",
+    id: 6,
+    type: "uint16",
+    access: "R V",
+    conformance: "[TL]",
+    default: 0,
+    quality: "N",
+    details: "Indicates the total number of tilt actuations applied to the window covering since the device was installed.",
+    xref: { document: "cluster", section: "5.3.6.8" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "ConfigStatus",
+    id: 7,
+    type: "ConfigStatusBitmap",
+    access: "R V",
+    conformance: "M",
+    constraint: "desc",
+    quality: "N",
+    details: "This attribute specifies the configuration and status information of the window covering.\nTo change settings, devices shall write to the Mode attribute. The behavior causing the setting or clearing of each bit is vendor specific.",
+    xref: { document: "cluster", section: "5.3.6.9" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "CurrentPositionLiftPercentage",
+    id: 8,
+    type: "percent",
+    access: "R V",
+    conformance: "[LF & PA_LF]",
+    default: null,
+    quality: "X N S P",
+    details: "Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute is equal to CurrentPositionLiftPercent100ths attribute divided by 100.",
+    xref: { document: "cluster", section: "5.3.6.12" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "CurrentPositionTiltPercentage",
+    id: 9,
+    type: "percent",
+    access: "R V",
+    conformance: "[TL & PA_TL]",
+    constraint: "0 to 100",
+    default: null,
+    quality: "X N S P",
+    details: "Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute is equal to CurrentPositionTiltPercent100ths attribute divided by 100.",
+    xref: { document: "cluster", section: "5.3.6.13" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "OperationalStatus",
+    id: 10,
+    type: "OperationalStatusBitmap",
+    access: "R V",
+    conformance: "M",
+    default: 0,
+    quality: "P",
+    details: "Indicates the currently ongoing operations and applies to all type of devices.",
+    xref: { document: "cluster", section: "5.3.6.16" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "TargetPositionLiftPercent100ths",
+    id: 11,
+    type: "percent100ths",
+    access: "R V",
+    conformance: "LF & PA_LF",
+    default: null,
+    quality: "X S P",
+    details: "Indicates the position where the window covering lift will go or is moving to as a percentage (Unit 0.01%).",
+    xref: { document: "cluster", section: "5.3.6.14" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "TargetPositionTiltPercent100ths",
+    id: 12,
+    type: "percent100ths",
+    access: "R V",
+    conformance: "TL & PA_TL",
+    default: null,
+    quality: "X S P",
+    details: "Indicates the position where the window covering tilt will go or is moving to as a percentage (Unit 0.01%).",
+    xref: { document: "cluster", section: "5.3.6.15" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "EndProductType",
+    id: 13,
+    type: "EndProductTypeEnum",
+    access: "R V",
+    conformance: "M",
+    constraint: "desc",
+    default: 0,
+    quality: "F",
+    details: "This attribute SHOULD provide more detail about the product type than can be determined from the main category indicated by the Type attribute.\nThe table below helps to match the EndProductType attribute with the Type attribute.",
+    xref: { document: "cluster", section: "5.3.6.17" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "CurrentPositionLiftPercent100ths",
+    id: 14,
+    type: "percent100ths",
+    access: "R V",
+    conformance: "LF & PA_LF",
+    constraint: "0 to 10000",
+    default: null,
+    quality: "X N P",
+    details: "Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals 100.00%.",
+    xref: { document: "cluster", section: "5.3.6.10" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "CurrentPositionTiltPercent100ths",
+    id: 15,
+    type: "percent100ths",
+    access: "R V",
+    conformance: "TL & PA_TL",
+    constraint: "0 to 10000",
+    default: null,
+    quality: "X N P",
+    details: "Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals 100.00%.",
+    xref: { document: "cluster", section: "5.3.6.11" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "InstalledOpenLimitLift",
+    id: 16,
+    type: "uint16",
+    access: "R V",
+    conformance: "LF & PA_LF & ABS",
+    constraint: "0 to 65534",
+    default: 0,
+    quality: "N",
+    details: "Indicates the open limit for lifting the window covering whether position (in centimeters) is encoded or timed.",
+    xref: { document: "cluster", section: "5.3.6.18" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "InstalledClosedLimitLift",
+    id: 17,
+    type: "uint16",
+    access: "R V",
+    conformance: "LF & PA_LF & ABS",
+    constraint: "0 to 65534",
+    default: 65534,
+    quality: "N",
+    details: "Indicates the closed limit for lifting the window covering whether position (in centimeters) is encoded or timed.",
+    xref: { document: "cluster", section: "5.3.6.19" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "InstalledOpenLimitTilt",
+    id: 18,
+    type: "uint16",
+    access: "R V",
+    conformance: "TL & PA_TL & ABS",
+    constraint: "0 to 65534",
+    default: 0,
+    quality: "N",
+    details: "Indicates the open limit for tilting the window covering whether position (in tenth of a degree) is encoded or timed.",
+    xref: { document: "cluster", section: "5.3.6.20" }
+  }),
+  (0, import_elements.AttributeElement)({
+    name: "InstalledClosedLimitTilt",
+    id: 19,
+    type: "uint16",
+    access: "R V",
+    conformance: "TL & PA_TL & ABS",
+    constraint: "0 to 65534",
+    default: 65534,
+    quality: "N",
+    details: "Indicates the closed limit for tilting the window covering whether position (in tenth of a degree) is encoded or timed.",
+    xref: { document: "cluster", section: "5.3.6.21" }
+  }),
+  (0, import_elements.AttributeElement)({ name: "VelocityLift", id: 20, conformance: "D", xref: { document: "cluster", section: "5.3.6" } }),
+  (0, import_elements.AttributeElement)(
+    { name: "AccelerationTimeLift", id: 21, conformance: "D", xref: { document: "cluster", section: "5.3.6" } }
+  ),
+  (0, import_elements.AttributeElement)(
+    { name: "DecelerationTimeLift", id: 22, conformance: "D", xref: { document: "cluster", section: "5.3.6" } }
+  ),
+  (0, import_elements.AttributeElement)({
+    name: "Mode",
+    id: 23,
+    type: "ModeBitmap",
+    access: "RW VM",
+    conformance: "M",
+    default: 0,
+    quality: "N",
+    details: "The Mode attribute allows configuration of the window covering, such as: reversing the motor direction, placing the window covering into calibration mode, placing the motor into maintenance mode, disabling the network, and disabling status LEDs.\nIn the case a device does not support or implement a specific mode, e.g. the device has a specific installation method and reversal is not relevant or the device does not include a maintenance mode, any write interaction to the Mode attribute, with an unsupported mode bit or any out of bounds bits set, must be ignored and a response containing the status of CONSTRAINT_ERROR will be returned.",
+    xref: { document: "cluster", section: "5.3.6.22" }
+  }),
+  (0, import_elements.AttributeElement)({ name: "IntermediateSetpointsLift", id: 24, conformance: "D", xref: { document: "cluster", section: "5.3.6" } }),
+  (0, import_elements.AttributeElement)({ name: "IntermediateSetpointsTilt", id: 25, conformance: "D", xref: { document: "cluster", section: "5.3.6" } }),
+  (0, import_elements.AttributeElement)({
+    name: "SafetyStatus",
+    id: 26,
+    type: "SafetyStatusBitmap",
+    access: "R V",
+    conformance: "O",
+    constraint: "desc",
+    default: 0,
+    quality: "P",
+    details: "The SafetyStatus attribute reflects the state of the safety sensors and the common issues preventing movements. By default for nominal operation all flags are cleared (0). A device might support none, one or several bit flags from this attribute (all optional).",
+    xref: { document: "cluster", section: "5.3.6.23" }
+  }),
+  (0, import_elements.CommandElement)({
+    name: "UpOrOpen",
+    id: 0,
+    access: "O",
+    conformance: "M",
+    direction: "request",
+    response: "status",
+    details: "Upon receipt of this command, the window covering will adjust its position so the physical lift/slide and tilt is at the maximum open/up position. This will happen as fast as possible. The server attributes shall be updated as follows:\nif the PositionAware feature is supported:\n  \u2022 TargetPositionLiftPercent100ths attribute shall be set to 0.00%.\n  \u2022 TargetPositionTiltPercent100ths attribute shall be set to 0.00%.\nThe server positioning attributes will follow the movements, once the movement has successfully finished, the server attributes shall be updated as follows:\nif the PositionAware feature is supported:\n  \u2022 CurrentPositionLiftPercent100ths attribute shall be 0.00%.\n  \u2022 CurrentPositionLiftPercentage attribute shall be 0%.\n  \u2022 CurrentPositionTiltPercent100ths attribute shall be 0.00%.\n  \u2022 CurrentPositionTiltPercentage attribute shall be 0%. if the AbsolutePosition feature is     supported:\n  \u2022 CurrentPositionLift attribute shall be equal to the InstalledOpenLimitLift attribute.\n  \u2022 CurrentPositionTilt attribute shall be equal to the InstalledOpenLimitTilt attribute.",
+    xref: { document: "cluster", section: "5.3.7.1" }
+  }),
+  (0, import_elements.CommandElement)({
+    name: "DownOrClose",
+    id: 1,
+    access: "O",
+    conformance: "M",
+    direction: "request",
+    response: "status",
+    details: "Upon receipt of this command, the window covering will adjust its position so the physical lift/slide and tilt is at the maximum closed/down position. This will happen as fast as possible. The server attributes supported shall be updated as follows:\nif the PositionAware feature is supported:\n  \u2022 TargetPositionLiftPercent100ths attribute shall be set to 100.00%.\n  \u2022 TargetPositionTiltPercent100ths attribute shall be set to 100.00%.\nThe server positioning attributes will follow the movements, once the movement has successfully finished, the server attributes shall be updated as follows:\nif the PositionAware feature is supported:\n  \u2022 CurrentPositionLiftPercent100ths attribute shall be 100.00%.\n  \u2022 CurrentPositionLiftPercentage attribute shall be 100%.\n  \u2022 CurrentPositionTiltPercent100ths attribute shall be 100.00%.\n  \u2022 CurrentPositionTiltPercentage attribute shall be 100%. if the AbsolutePosition feature is     supported:\n  \u2022 CurrentPositionLift attribute shall be equal to the InstalledClosedLimitLift attribute.\n  \u2022 CurrentPositionTilt attribute shall be equal to the InstalledClosedLimitTilt attribute.",
+    xref: { document: "cluster", section: "5.3.7.2" }
+  }),
+  (0, import_elements.CommandElement)({
+    name: "StopMotion",
+    id: 2,
+    access: "O",
+    conformance: "M",
+    direction: "request",
+    response: "status",
+    details: "Upon receipt of this command, the window covering will stop any adjusting to the physical tilt and lift/slide that is currently occurring. The server attributes supported shall be updated as follows:\n  \u2022 TargetPositionLiftPercent100ths attribute will be set to CurrentPositionLiftPercent100ths     attribute value.\n  \u2022 TargetPositionTiltPercent100ths attribute will be set to CurrentPositionTiltPercent100ths     attribute value.",
+    xref: { document: "cluster", section: "5.3.7.3" }
+  }),
+  (0, import_elements.CommandElement)(
+    {
       name: "GoToLiftValue",
       id: 4,
       access: "O",
       conformance: "[LF & ABS]",
       direction: "request",
       response: "status",
-      xref: { document: "cluster", section: "5.3.7.4" },
-      children: [(0, import_elements.FieldElement)({
-        name: "LiftValue",
-        id: 0,
-        type: "uint16",
-        conformance: "M",
-        constraint: "installedOpenLimitLift to installedClosedLimitLift",
-        details: "This field shall specify the requested physical lift/slide position in unit cm (centimeters).",
-        xref: { document: "cluster", section: "5.3.7.4.1" }
-      })]
-    }),
-    (0, import_elements.CommandElement)({
+      xref: { document: "cluster", section: "5.3.7.4" }
+    },
+    (0, import_elements.FieldElement)({
+      name: "LiftValue",
+      id: 0,
+      type: "uint16",
+      conformance: "M",
+      constraint: "installedOpenLimitLift to installedClosedLimitLift",
+      details: "This field shall specify the requested physical lift/slide position in unit cm (centimeters).",
+      xref: { document: "cluster", section: "5.3.7.4.1" }
+    })
+  ),
+  (0, import_elements.CommandElement)(
+    {
       name: "GoToLiftPercentage",
       id: 5,
       access: "O",
@@ -423,37 +401,33 @@ const WindowCovering = (0, import_elements.ClusterElement)({
       direction: "request",
       response: "status",
       details: "Upon receipt of this command, the server will adjust the window covering to the lift/slide percentage specified in the payload of this command.\nIf the command includes LiftPercent100thsValue, then TargetPositionLiftPercent100ths attribute shall be set to LiftPercent100thsValue. Otherwise the TargetPositionLiftPercent100ths attribute shall be set to LiftPercentageValue * 100.\nIf a client includes LiftPercent100thsValue in the command, the LiftPercentageValue shall be set to LiftPercent100thsValue / 100, so a legacy server which only supports LiftPercentageValue (not LiftPercent100thsValue) has a value to set the target position.\nIf the server does not support the PositionAware feature, then a zero percentage shall be treated as a UpOrOpen command and a non-zero percentage shall be treated as an DownOrClose command. If the device is only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be returned.",
-      xref: { document: "cluster", section: "5.3.7.5" },
-      children: [
-        (0, import_elements.FieldElement)({
-          name: "LiftPercent100thsValue",
-          id: 0,
-          type: "percent100ths",
-          conformance: "M",
-          constraint: "desc"
-        }),
-        (0, import_elements.FieldElement)({ name: "Ignored", id: 1, type: "percent100ths", conformance: "D", constraint: "desc" })
-      ]
-    }),
-    (0, import_elements.CommandElement)({
+      xref: { document: "cluster", section: "5.3.7.5" }
+    },
+    (0, import_elements.FieldElement)({ name: "LiftPercent100thsValue", id: 0, type: "percent100ths", conformance: "M", constraint: "desc" }),
+    (0, import_elements.FieldElement)({ name: "Ignored", id: 1, type: "percent100ths", conformance: "X", constraint: "desc" })
+  ),
+  (0, import_elements.CommandElement)(
+    {
       name: "GoToTiltValue",
       id: 7,
       access: "O",
       conformance: "[TL & ABS]",
       direction: "request",
       response: "status",
-      xref: { document: "cluster", section: "5.3.7.6" },
-      children: [(0, import_elements.FieldElement)({
-        name: "TiltValue",
-        id: 0,
-        type: "uint16",
-        conformance: "M",
-        constraint: "installedOpenLimitTilt to installedClosedLimitTilt",
-        details: "This field shall specify the requested physical tilt position in unit 0.1\xB0 (tenth of a degrees).",
-        xref: { document: "cluster", section: "5.3.7.6.1" }
-      })]
-    }),
-    (0, import_elements.CommandElement)({
+      xref: { document: "cluster", section: "5.3.7.6" }
+    },
+    (0, import_elements.FieldElement)({
+      name: "TiltValue",
+      id: 0,
+      type: "uint16",
+      conformance: "M",
+      constraint: "installedOpenLimitTilt to installedClosedLimitTilt",
+      details: "This field shall specify the requested physical tilt position in unit 0.1\xB0 (tenth of a degrees).",
+      xref: { document: "cluster", section: "5.3.7.6.1" }
+    })
+  ),
+  (0, import_elements.CommandElement)(
+    {
       name: "GoToTiltPercentage",
       id: 8,
       access: "O",
@@ -461,301 +435,245 @@ const WindowCovering = (0, import_elements.ClusterElement)({
       direction: "request",
       response: "status",
       details: "Upon receipt of this command, the server will adjust the window covering to the tilt percentage specified in the payload of this command.\nIf the command includes TiltPercent100thsValue, then TargetPositionTiltPercent100ths attribute shall be set to TiltPercent100thsValue. Otherwise the TargetPositionTiltPercent100ths attribute shall be set to TiltPercentageValue * 100.\nIf a client includes TiltPercent100thsValue in the command, the TiltPercentageValue shall be set to TiltPercent100thsValue / 100, so a legacy server which only supports TiltPercentageValue (not TiltPercent100thsValue) has a value to set the target position.\nIf the server does not support the PositionAware feature, then a zero percentage shall be treated as a UpOrOpen command and a non-zero percentage shall be treated as an DownOrClose command. If the device is only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be returned.",
-      xref: { document: "cluster", section: "5.3.7.7" },
-      children: [
-        (0, import_elements.FieldElement)({
-          name: "TiltPercent100thsValue",
-          id: 0,
-          type: "percent100ths",
-          conformance: "M",
-          constraint: "desc"
-        }),
-        (0, import_elements.FieldElement)({ name: "Ignored", id: 1, type: "percent100ths", conformance: "D", constraint: "desc" })
-      ]
-    }),
-    (0, import_elements.DatatypeElement)({
-      name: "ConfigStatusBitmap",
-      type: "map8",
-      xref: { document: "cluster", section: "5.3.5.1" },
-      children: [
-        (0, import_elements.FieldElement)({
-          name: "Operational",
-          constraint: "0",
-          description: "Device is operational.",
-          details: "This bit shall indicate whether the window covering is operational for regular use:\n  \u2022 0 = Not Operational\n  \u2022 1 = Operational",
-          xref: { document: "cluster", section: "5.3.5.1.1" }
-        }),
-        (0, import_elements.FieldElement)({ name: "OnlineReserved", constraint: "1", description: "Deprecated and reserved." }),
-        (0, import_elements.FieldElement)({
-          name: "LiftMovementReversed",
-          constraint: "2",
-          description: "The lift movement is reversed.",
-          details: "This bit shall indicate whether the lift movement is reversed:\n  \u2022 0 = Lift movement is normal\n  \u2022 1 = Lift movement is reversed",
-          xref: { document: "cluster", section: "5.3.5.1.2" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "LiftPositionAware",
-          constraint: "3",
-          description: "Supports the PositionAwareLift feature (PA_LF).",
-          details: "This bit shall indicate whether the window covering supports the PositionAwareLift feature:\n  \u2022 0 = Lift control is not position aware\n  \u2022 1 = Lift control is position aware (PA_LF)",
-          xref: { document: "cluster", section: "5.3.5.1.3" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "TiltPositionAware",
-          constraint: "4",
-          description: "Supports the PositionAwareTilt feature (PA_TL).",
-          details: "This bit shall indicate whether the window covering supports the PositionAwareTilt feature:\n  \u2022 0 = Tilt control is not position aware\n  \u2022 1 = Tilt control is position aware (PA_TL)",
-          xref: { document: "cluster", section: "5.3.5.1.4" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "LiftEncoderControlled",
-          constraint: "5",
-          description: "Uses an encoder for lift.",
-          details: "This bit shall indicate whether a position aware controlled window covering is employing an encoder for positioning the height of the window covering:\n  \u2022 0 = Timer Controlled\n  \u2022 1 = Encoder Controlled",
-          xref: { document: "cluster", section: "5.3.5.1.5" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "TiltEncoderControlled",
-          constraint: "6",
-          description: "Uses an encoder for tilt.",
-          details: "This bit shall indicate whether a position aware controlled window covering is employing an encoder for tilting the window covering:\n  \u2022 0 = Timer Controlled\n  \u2022 1 = Encoder Controlled",
-          xref: { document: "cluster", section: "5.3.5.1.6" }
-        })
-      ]
-    }),
-    (0, import_elements.DatatypeElement)({
-      name: "ModeBitmap",
-      type: "map8",
-      xref: { document: "cluster", section: "5.3.5.2" },
-      children: [
-        (0, import_elements.FieldElement)({
-          name: "MotorDirectionReversed",
-          constraint: "0",
-          description: "Reverse the lift direction.",
-          details: "This bit shall control the motor direction:\n  \u2022 0 = Lift movement is normal\n  \u2022 1 = Lift movement is reversed",
-          xref: { document: "cluster", section: "5.3.5.2.1" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "CalibrationMode",
-          constraint: "1",
-          description: "Perform a calibration.",
-          details: "This bit shall set the window covering into calibration mode:\n  \u2022 0 = Normal mode\n  \u2022 1 = Calibration mode",
-          xref: { document: "cluster", section: "5.3.5.2.2" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "MaintenanceMode",
-          constraint: "2",
-          description: "Freeze all motions for maintenance.",
-          details: "This bit shall set the window covering into maintenance mode:\n  \u2022 0 = Normal mode\n  \u2022 1 = Maintenance mode",
-          xref: { document: "cluster", section: "5.3.5.2.3" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "LedFeedback",
-          constraint: "3",
-          description: "Control the LEDs feedback.",
-          details: "This bit shall control feedback LEDs:\n  \u2022 0 = LEDs are off\n  \u2022 1 = LEDs will display feedback",
-          xref: { document: "cluster", section: "5.3.5.2.4" }
-        })
-      ]
-    }),
-    (0, import_elements.DatatypeElement)({
+      xref: { document: "cluster", section: "5.3.7.7" }
+    },
+    (0, import_elements.FieldElement)({ name: "TiltPercent100thsValue", id: 0, type: "percent100ths", conformance: "M", constraint: "desc" }),
+    (0, import_elements.FieldElement)({ name: "Ignored", id: 1, type: "percent100ths", conformance: "X", constraint: "desc" })
+  ),
+  (0, import_elements.DatatypeElement)(
+    { name: "ConfigStatusBitmap", type: "map8", xref: { document: "cluster", section: "5.3.5.1" } },
+    (0, import_elements.FieldElement)(
+      {
+        name: "Operational",
+        constraint: "0",
+        description: "Device is operational.",
+        details: "This bit shall indicate whether the window covering is operational for regular use:\n  \u2022 0 = Not Operational\n  \u2022 1 = Operational",
+        xref: { document: "cluster", section: "5.3.5.1.1" }
+      }
+    ),
+    (0, import_elements.FieldElement)({ name: "OnlineReserved", constraint: "1", description: "Deprecated and reserved." }),
+    (0, import_elements.FieldElement)(
+      {
+        name: "LiftMovementReversed",
+        constraint: "2",
+        description: "The lift movement is reversed.",
+        details: "This bit shall indicate whether the lift movement is reversed:\n  \u2022 0 = Lift movement is normal\n  \u2022 1 = Lift movement is reversed",
+        xref: { document: "cluster", section: "5.3.5.1.2" }
+      }
+    ),
+    (0, import_elements.FieldElement)(
+      {
+        name: "LiftPositionAware",
+        constraint: "3",
+        description: "Supports the PositionAwareLift feature (PA_LF).",
+        details: "This bit shall indicate whether the window covering supports the PositionAwareLift feature:\n  \u2022 0 = Lift control is not position aware\n  \u2022 1 = Lift control is position aware (PA_LF)",
+        xref: { document: "cluster", section: "5.3.5.1.3" }
+      }
+    ),
+    (0, import_elements.FieldElement)(
+      {
+        name: "TiltPositionAware",
+        constraint: "4",
+        description: "Supports the PositionAwareTilt feature (PA_TL).",
+        details: "This bit shall indicate whether the window covering supports the PositionAwareTilt feature:\n  \u2022 0 = Tilt control is not position aware\n  \u2022 1 = Tilt control is position aware (PA_TL)",
+        xref: { document: "cluster", section: "5.3.5.1.4" }
+      }
+    ),
+    (0, import_elements.FieldElement)(
+      {
+        name: "LiftEncoderControlled",
+        constraint: "5",
+        description: "Uses an encoder for lift.",
+        details: "This bit shall indicate whether a position aware controlled window covering is employing an encoder for positioning the height of the window covering:\n  \u2022 0 = Timer Controlled\n  \u2022 1 = Encoder Controlled",
+        xref: { document: "cluster", section: "5.3.5.1.5" }
+      }
+    ),
+    (0, import_elements.FieldElement)(
+      {
+        name: "TiltEncoderControlled",
+        constraint: "6",
+        description: "Uses an encoder for tilt.",
+        details: "This bit shall indicate whether a position aware controlled window covering is employing an encoder for tilting the window covering:\n  \u2022 0 = Timer Controlled\n  \u2022 1 = Encoder Controlled",
+        xref: { document: "cluster", section: "5.3.5.1.6" }
+      }
+    )
+  ),
+  (0, import_elements.DatatypeElement)(
+    { name: "ModeBitmap", type: "map8", xref: { document: "cluster", section: "5.3.5.2" } },
+    (0, import_elements.FieldElement)(
+      {
+        name: "MotorDirectionReversed",
+        constraint: "0",
+        description: "Reverse the lift direction.",
+        details: "This bit shall control the motor direction:\n  \u2022 0 = Lift movement is normal\n  \u2022 1 = Lift movement is reversed",
+        xref: { document: "cluster", section: "5.3.5.2.1" }
+      }
+    ),
+    (0, import_elements.FieldElement)(
+      {
+        name: "CalibrationMode",
+        constraint: "1",
+        description: "Perform a calibration.",
+        details: "This bit shall set the window covering into calibration mode:\n  \u2022 0 = Normal mode\n  \u2022 1 = Calibration mode",
+        xref: { document: "cluster", section: "5.3.5.2.2" }
+      }
+    ),
+    (0, import_elements.FieldElement)(
+      {
+        name: "MaintenanceMode",
+        constraint: "2",
+        description: "Freeze all motions for maintenance.",
+        details: "This bit shall set the window covering into maintenance mode:\n  \u2022 0 = Normal mode\n  \u2022 1 = Maintenance mode",
+        xref: { document: "cluster", section: "5.3.5.2.3" }
+      }
+    ),
+    (0, import_elements.FieldElement)(
+      {
+        name: "LedFeedback",
+        constraint: "3",
+        description: "Control the LEDs feedback.",
+        details: "This bit shall control feedback LEDs:\n  \u2022 0 = LEDs are off\n  \u2022 1 = LEDs will display feedback",
+        xref: { document: "cluster", section: "5.3.5.2.4" }
+      }
+    )
+  ),
+  (0, import_elements.DatatypeElement)(
+    {
       name: "OperationalStatusBitmap",
       type: "map8",
       details: "The OperationalStatusBitmap is using several internal operational state fields (composed of 2 bits) following this definition:\n  \u2022 00b = Currently not moving\n  \u2022 01b = Currently opening (e.g. moving from closed to open).\n  \u2022 10b = Currently closing (e.g. moving from open to closed).\n  \u2022 11b = Reserved",
-      xref: { document: "cluster", section: "5.3.5.3" },
-      children: [
-        (0, import_elements.FieldElement)({
-          name: "Global",
-          type: "MovementStatus",
-          constraint: "0 to 2",
-          description: "Global operational state.",
-          details: "These bits shall indicate in which direction the covering is currently moving or if it has stopped. Global operational state shall always reflect the overall motion of the device.",
-          xref: { document: "cluster", section: "5.3.5.3.1" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "Lift",
-          type: "MovementStatus",
-          constraint: "2 to 4",
-          description: "Lift operational state.",
-          details: "These bits shall indicate in which direction the covering\u2019s lift is currently moving or if it has stopped.",
-          xref: { document: "cluster", section: "5.3.5.3.2" }
-        }),
-        (0, import_elements.FieldElement)({
-          name: "Tilt",
-          type: "MovementStatus",
-          constraint: "4 to 6",
-          description: "Tilt operational state.",
-          details: "These bits shall indicate in which direction the covering\u2019s tilt is currently moving or if it has stopped.",
-          xref: { document: "cluster", section: "5.3.5.3.3" }
-        })
-      ]
-    }),
-    (0, import_elements.DatatypeElement)({
-      name: "SafetyStatusBitmap",
-      type: "map16",
-      xref: { document: "cluster", section: "5.3.5.4" },
-      children: [
-        (0, import_elements.FieldElement)({
-          name: "RemoteLockout",
-          constraint: "0",
-          description: "Movement commands are ignored (locked out). e.g. not granted authorization, outside some time/date range."
-        }),
-        (0, import_elements.FieldElement)({
-          name: "TamperDetection",
-          constraint: "1",
-          description: "Tampering detected on sensors or any other safety equipment. Ex: a device has been forcedly moved without its actuator(s)."
-        }),
-        (0, import_elements.FieldElement)({
-          name: "FailedCommunication",
-          constraint: "2",
-          description: "Communication failure to sensors or other safety equipment."
-        }),
-        (0, import_elements.FieldElement)({
-          name: "PositionFailure",
-          constraint: "3",
-          description: "Device has failed to reach the desired position. e.g. with position aware device, time expired before TargetPosition is reached."
-        }),
-        (0, import_elements.FieldElement)({
-          name: "ThermalProtection",
-          constraint: "4",
-          description: "Motor(s) and/or electric circuit thermal protection activated."
-        }),
-        (0, import_elements.FieldElement)({
-          name: "ObstacleDetected",
-          constraint: "5",
-          description: "An obstacle is preventing actuator movement."
-        }),
-        (0, import_elements.FieldElement)({
-          name: "Power",
-          constraint: "6",
-          description: "Device has power related issue or limitation e.g. device is running w/ the help of a backup battery or power might not be fully available at the moment."
-        }),
-        (0, import_elements.FieldElement)({
-          name: "StopInput",
-          constraint: "7",
-          description: "Local safety sensor (not a direct obstacle) is preventing movements (e.g. Safety EU Standard EN60335)."
-        }),
-        (0, import_elements.FieldElement)({
-          name: "MotorJammed",
-          constraint: "8",
-          description: "Mechanical problem related to the motor(s) detected."
-        }),
-        (0, import_elements.FieldElement)({ name: "HardwareFailure", constraint: "9", description: "PCB, fuse and other electrics problems." }),
-        (0, import_elements.FieldElement)({
-          name: "ManualOperation",
-          constraint: "10",
-          description: "Actuator is manually operated and is preventing actuator movement (e.g. actuator is disengaged/decoupled)."
-        }),
-        (0, import_elements.FieldElement)({ name: "Protection", constraint: "11", description: "Protection is activated." })
-      ]
-    }),
-    (0, import_elements.DatatypeElement)({
-      name: "TypeEnum",
-      type: "enum8",
-      asOf: "1.2",
-      xref: { document: "cluster", section: "5.3.5.5" },
-      children: [
-        (0, import_elements.FieldElement)({ name: "Rollershade", id: 0, conformance: "LF & !TL", description: "RollerShade" }),
-        (0, import_elements.FieldElement)({
-          name: "Rollershade2Motor",
-          id: 1,
-          conformance: "LF & !TL",
-          description: "RollerShade - 2 Motor"
-        }),
-        (0, import_elements.FieldElement)({
-          name: "RollershadeExterior",
-          id: 2,
-          conformance: "LF & !TL",
-          description: "RollerShade - Exterior"
-        }),
-        (0, import_elements.FieldElement)({
-          name: "RollershadeExterior2Motor",
-          id: 3,
-          conformance: "LF & !TL",
-          description: "RollerShade - Exterior - 2 Motor"
-        }),
-        (0, import_elements.FieldElement)({ name: "Drapery", id: 4, conformance: "LF & !TL", description: "Drapery (curtain)" }),
-        (0, import_elements.FieldElement)({ name: "Awning", id: 5, conformance: "LF & !TL", description: "Awning" }),
-        (0, import_elements.FieldElement)({ name: "Shutter", id: 6, conformance: "LF | TL", description: "Shutter" }),
-        (0, import_elements.FieldElement)({
-          name: "TiltBlindTiltOnly",
-          id: 7,
-          conformance: "!LF & TL",
-          description: "Tilt Blind - Tilt Only"
-        }),
-        (0, import_elements.FieldElement)({ name: "TiltBlindLift", id: 8, conformance: "LF & TL", description: "Tilt Blind - Lift & Tilt" }),
-        (0, import_elements.FieldElement)({ name: "ProjectorScreen", id: 9, conformance: "LF & !TL", description: "Projector Screen" }),
-        (0, import_elements.FieldElement)({ name: "Unknown", id: 255, conformance: "O", description: "Unknown" })
-      ]
-    }),
-    (0, import_elements.DatatypeElement)({
-      name: "EndProductTypeEnum",
-      type: "enum8",
-      xref: { document: "cluster", section: "5.3.5.6" },
-      children: [
-        (0, import_elements.FieldElement)({ name: "RollerShade", id: 0, conformance: "LF", description: "Simple Roller Shade" }),
-        (0, import_elements.FieldElement)({ name: "RomanShade", id: 1, conformance: "LF", description: "Roman Shade" }),
-        (0, import_elements.FieldElement)({ name: "BalloonShade", id: 2, conformance: "LF", description: "Balloon Shade" }),
-        (0, import_elements.FieldElement)({ name: "WovenWood", id: 3, conformance: "LF", description: "Woven Wood" }),
-        (0, import_elements.FieldElement)({ name: "PleatedShade", id: 4, conformance: "LF", description: "Pleated Shade" }),
-        (0, import_elements.FieldElement)({ name: "CellularShade", id: 5, conformance: "LF", description: "Cellular Shade" }),
-        (0, import_elements.FieldElement)({ name: "LayeredShade", id: 6, conformance: "LF", description: "Layered Shade" }),
-        (0, import_elements.FieldElement)({ name: "LayeredShade2D", id: 7, conformance: "LF", description: "Layered Shade 2D" }),
-        (0, import_elements.FieldElement)({ name: "SheerShade", id: 8, conformance: "LF & TL", description: "Sheer Shade" }),
-        (0, import_elements.FieldElement)({
-          name: "TiltOnlyInteriorBlind",
-          id: 9,
-          conformance: "TL",
-          description: "Tilt Only Interior Blind"
-        }),
-        (0, import_elements.FieldElement)({ name: "InteriorBlind", id: 10, conformance: "LF & TL", description: "Interior Blind" }),
-        (0, import_elements.FieldElement)({
-          name: "VerticalBlindStripCurtain",
-          id: 11,
-          conformance: "LF & TL",
-          description: "Vertical Blind, Strip Curtain"
-        }),
-        (0, import_elements.FieldElement)({
-          name: "InteriorVenetianBlind",
-          id: 12,
-          conformance: "LF & TL",
-          description: "Interior Venetian Blind"
-        }),
-        (0, import_elements.FieldElement)({
-          name: "ExteriorVenetianBlind",
-          id: 13,
-          conformance: "LF & TL",
-          description: "Exterior Venetian Blind"
-        }),
-        (0, import_elements.FieldElement)({ name: "LateralLeftCurtain", id: 14, conformance: "LF", description: "Lateral Left Curtain" }),
-        (0, import_elements.FieldElement)({ name: "LateralRightCurtain", id: 15, conformance: "LF", description: "Lateral Right Curtain" }),
-        (0, import_elements.FieldElement)({ name: "CentralCurtain", id: 16, conformance: "LF", description: "Central Curtain" }),
-        (0, import_elements.FieldElement)({ name: "RollerShutter", id: 17, conformance: "LF", description: "Roller Shutter" }),
-        (0, import_elements.FieldElement)({
-          name: "ExteriorVerticalScreen",
-          id: 18,
-          conformance: "LF",
-          description: "Exterior Vertical Screen"
-        }),
-        (0, import_elements.FieldElement)({ name: "AwningTerracePatio", id: 19, conformance: "LF", description: "Awning Terrace (Patio)" }),
-        (0, import_elements.FieldElement)({ name: "AwningVerticalScreen", id: 20, conformance: "LF", description: "Awning Vertical Screen" }),
-        (0, import_elements.FieldElement)({ name: "TiltOnlyPergola", id: 21, conformance: "LF | TL", description: "Tilt Only Pergola" }),
-        (0, import_elements.FieldElement)({ name: "SwingingShutter", id: 22, conformance: "LF | TL", description: "Swinging Shutter" }),
-        (0, import_elements.FieldElement)({ name: "SlidingShutter", id: 23, conformance: "LF | TL", description: "Sliding Shutter" }),
-        (0, import_elements.FieldElement)({ name: "Unknown", id: 255, conformance: "O", description: "Unknown" })
-      ]
-    }),
-    (0, import_elements.DatatypeElement)({
-      name: "MovementStatus",
-      type: "enum8",
-      details: "Values for OperationalStatus attribute fields.",
-      children: [
-        (0, import_elements.FieldElement)({ name: "Stopped", id: 0, details: "Covering is not moving" }),
-        (0, import_elements.FieldElement)({ name: "Opening", id: 1, details: "Covering is moving from closed to open" }),
-        (0, import_elements.FieldElement)({ name: "Closing", id: 2, details: "Covering is moving from open to closed" })
-      ]
+      xref: { document: "cluster", section: "5.3.5.3" }
+    },
+    (0, import_elements.FieldElement)({
+      name: "Global",
+      type: "MovementStatus",
+      constraint: "0 to 2",
+      description: "Global operational state.",
+      details: "These bits shall indicate in which direction the covering is currently moving or if it has stopped. Global operational state shall always reflect the overall motion of the device.",
+      xref: { document: "cluster", section: "5.3.5.3.1" }
+    }),
+    (0, import_elements.FieldElement)({
+      name: "Lift",
+      type: "MovementStatus",
+      constraint: "2 to 4",
+      description: "Lift operational state.",
+      details: "These bits shall indicate in which direction the covering\u2019s lift is currently moving or if it has stopped.",
+      xref: { document: "cluster", section: "5.3.5.3.2" }
+    }),
+    (0, import_elements.FieldElement)({
+      name: "Tilt",
+      type: "MovementStatus",
+      constraint: "4 to 6",
+      description: "Tilt operational state.",
+      details: "These bits shall indicate in which direction the covering\u2019s tilt is currently moving or if it has stopped.",
+      xref: { document: "cluster", section: "5.3.5.3.3" }
     })
-  ]
-});
+  ),
+  (0, import_elements.DatatypeElement)(
+    { name: "SafetyStatusBitmap", type: "map16", xref: { document: "cluster", section: "5.3.5.4" } },
+    (0, import_elements.FieldElement)({
+      name: "RemoteLockout",
+      constraint: "0",
+      description: "Movement commands are ignored (locked out). e.g. not granted authorization, outside some time/date range."
+    }),
+    (0, import_elements.FieldElement)({
+      name: "TamperDetection",
+      constraint: "1",
+      description: "Tampering detected on sensors or any other safety equipment. Ex: a device has been forcedly moved without its actuator(s)."
+    }),
+    (0, import_elements.FieldElement)({
+      name: "FailedCommunication",
+      constraint: "2",
+      description: "Communication failure to sensors or other safety equipment."
+    }),
+    (0, import_elements.FieldElement)({
+      name: "PositionFailure",
+      constraint: "3",
+      description: "Device has failed to reach the desired position. e.g. with position aware device, time expired before TargetPosition is reached."
+    }),
+    (0, import_elements.FieldElement)({
+      name: "ThermalProtection",
+      constraint: "4",
+      description: "Motor(s) and/or electric circuit thermal protection activated."
+    }),
+    (0, import_elements.FieldElement)({ name: "ObstacleDetected", constraint: "5", description: "An obstacle is preventing actuator movement." }),
+    (0, import_elements.FieldElement)({
+      name: "Power",
+      constraint: "6",
+      description: "Device has power related issue or limitation e.g. device is running w/ the help of a backup battery or power might not be fully available at the moment."
+    }),
+    (0, import_elements.FieldElement)({
+      name: "StopInput",
+      constraint: "7",
+      description: "Local safety sensor (not a direct obstacle) is preventing movements (e.g. Safety EU Standard EN60335)."
+    }),
+    (0, import_elements.FieldElement)({ name: "MotorJammed", constraint: "8", description: "Mechanical problem related to the motor(s) detected." }),
+    (0, import_elements.FieldElement)({ name: "HardwareFailure", constraint: "9", description: "PCB, fuse and other electrics problems." }),
+    (0, import_elements.FieldElement)({
+      name: "ManualOperation",
+      constraint: "10",
+      description: "Actuator is manually operated and is preventing actuator movement (e.g. actuator is disengaged/decoupled)."
+    }),
+    (0, import_elements.FieldElement)({ name: "Protection", constraint: "11", description: "Protection is activated." })
+  ),
+  (0, import_elements.DatatypeElement)(
+    { name: "TypeEnum", type: "enum8", asOf: "1.2", xref: { document: "cluster", section: "5.3.5.5" } },
+    (0, import_elements.FieldElement)({ name: "Rollershade", id: 0, conformance: "LF & !TL", description: "RollerShade" }),
+    (0, import_elements.FieldElement)({ name: "Rollershade2Motor", id: 1, conformance: "LF & !TL", description: "RollerShade - 2 Motor" }),
+    (0, import_elements.FieldElement)({ name: "RollershadeExterior", id: 2, conformance: "LF & !TL", description: "RollerShade - Exterior" }),
+    (0, import_elements.FieldElement)({
+      name: "RollershadeExterior2Motor",
+      id: 3,
+      conformance: "LF & !TL",
+      description: "RollerShade - Exterior - 2 Motor"
+    }),
+    (0, import_elements.FieldElement)({ name: "Drapery", id: 4, conformance: "LF & !TL", description: "Drapery (curtain)" }),
+    (0, import_elements.FieldElement)({ name: "Awning", id: 5, conformance: "LF & !TL", description: "Awning" }),
+    (0, import_elements.FieldElement)({ name: "Shutter", id: 6, conformance: "LF | TL", description: "Shutter" }),
+    (0, import_elements.FieldElement)({ name: "TiltBlindTiltOnly", id: 7, conformance: "!LF & TL", description: "Tilt Blind - Tilt Only" }),
+    (0, import_elements.FieldElement)({ name: "TiltBlindLift", id: 8, conformance: "LF & TL", description: "Tilt Blind - Lift & Tilt" }),
+    (0, import_elements.FieldElement)({ name: "ProjectorScreen", id: 9, conformance: "LF & !TL", description: "Projector Screen" }),
+    (0, import_elements.FieldElement)({ name: "Unknown", id: 255, conformance: "O", description: "Unknown" })
+  ),
+  (0, import_elements.DatatypeElement)(
+    { name: "EndProductTypeEnum", type: "enum8", xref: { document: "cluster", section: "5.3.5.6" } },
+    (0, import_elements.FieldElement)({ name: "RollerShade", id: 0, conformance: "LF", description: "Simple Roller Shade" }),
+    (0, import_elements.FieldElement)({ name: "RomanShade", id: 1, conformance: "LF", description: "Roman Shade" }),
+    (0, import_elements.FieldElement)({ name: "BalloonShade", id: 2, conformance: "LF", description: "Balloon Shade" }),
+    (0, import_elements.FieldElement)({ name: "WovenWood", id: 3, conformance: "LF", description: "Woven Wood" }),
+    (0, import_elements.FieldElement)({ name: "PleatedShade", id: 4, conformance: "LF", description: "Pleated Shade" }),
+    (0, import_elements.FieldElement)({ name: "CellularShade", id: 5, conformance: "LF", description: "Cellular Shade" }),
+    (0, import_elements.FieldElement)({ name: "LayeredShade", id: 6, conformance: "LF", description: "Layered Shade" }),
+    (0, import_elements.FieldElement)({ name: "LayeredShade2D", id: 7, conformance: "LF", description: "Layered Shade 2D" }),
+    (0, import_elements.FieldElement)({ name: "SheerShade", id: 8, conformance: "LF & TL", description: "Sheer Shade" }),
+    (0, import_elements.FieldElement)({ name: "TiltOnlyInteriorBlind", id: 9, conformance: "TL", description: "Tilt Only Interior Blind" }),
+    (0, import_elements.FieldElement)({ name: "InteriorBlind", id: 10, conformance: "LF & TL", description: "Interior Blind" }),
+    (0, import_elements.FieldElement)({
+      name: "VerticalBlindStripCurtain",
+      id: 11,
+      conformance: "LF & TL",
+      description: "Vertical Blind, Strip Curtain"
+    }),
+    (0, import_elements.FieldElement)({ name: "InteriorVenetianBlind", id: 12, conformance: "LF & TL", description: "Interior Venetian Blind" }),
+    (0, import_elements.FieldElement)({ name: "ExteriorVenetianBlind", id: 13, conformance: "LF & TL", description: "Exterior Venetian Blind" }),
+    (0, import_elements.FieldElement)({ name: "LateralLeftCurtain", id: 14, conformance: "LF", description: "Lateral Left Curtain" }),
+    (0, import_elements.FieldElement)({ name: "LateralRightCurtain", id: 15, conformance: "LF", description: "Lateral Right Curtain" }),
+    (0, import_elements.FieldElement)({ name: "CentralCurtain", id: 16, conformance: "LF", description: "Central Curtain" }),
+    (0, import_elements.FieldElement)({ name: "RollerShutter", id: 17, conformance: "LF", description: "Roller Shutter" }),
+    (0, import_elements.FieldElement)({ name: "ExteriorVerticalScreen", id: 18, conformance: "LF", description: "Exterior Vertical Screen" }),
+    (0, import_elements.FieldElement)({ name: "AwningTerracePatio", id: 19, conformance: "LF", description: "Awning Terrace (Patio)" }),
+    (0, import_elements.FieldElement)({ name: "AwningVerticalScreen", id: 20, conformance: "LF", description: "Awning Vertical Screen" }),
+    (0, import_elements.FieldElement)({ name: "TiltOnlyPergola", id: 21, conformance: "LF | TL", description: "Tilt Only Pergola" }),
+    (0, import_elements.FieldElement)({ name: "SwingingShutter", id: 22, conformance: "LF | TL", description: "Swinging Shutter" }),
+    (0, import_elements.FieldElement)({ name: "SlidingShutter", id: 23, conformance: "LF | TL", description: "Sliding Shutter" }),
+    (0, import_elements.FieldElement)({ name: "Unknown", id: 255, conformance: "O", description: "Unknown" })
+  ),
+  (0, import_elements.DatatypeElement)(
+    { name: "MovementStatus", type: "enum8", details: "Values for OperationalStatus attribute fields." },
+    (0, import_elements.FieldElement)({ name: "Stopped", id: 0, details: "Covering is not moving" }),
+    (0, import_elements.FieldElement)({ name: "Opening", id: 1, details: "Covering is moving from closed to open" }),
+    (0, import_elements.FieldElement)({ name: "Closing", id: 2, details: "Covering is moving from open to closed" })
+  )
+);
 import_MatterDefinition.MatterDefinition.children.push(WindowCovering);
 //# sourceMappingURL=WindowCovering.js.map