@master/internal-site 0.0.0-stage → 0.1.1

package/src/styles/blog-materials.css

@@ -0,0 +1,399 @@
+/*
+ * Blog materials: the quiet essence of the homepage, for the blog index and its articles. One fixed, soft light
+ * from above and slightly left; obsidian (light mode) and moonstone (dark mode) only as a tone in titles; the
+ * homepage's drafting guides (rails, rulers, crosses, corner marks, hatch) as structure. Effects should be felt
+ * more than seen. Semantics follow content/components/DESIGN.md: zinc neutrals, 1px contours, an inner top light,
+ * soft contact shadows, gold only as a rare, tiny accent.
+ *
+ * Scope
+ *   .blog-materials     Put on a page root. Defines the tokens below and paints the ground.
+ *
+ * Recipes
+ *   .blog-plate         A quiet sheet on the ground: 1px contour, inner top light, soft contact shadow.
+ *                       As (or inside) a link, hover/focus deepens the shadow a little, slowly; a press settles it
+ *                       onto the ground; nothing moves.
+ *   .blog-stone-text    A title tone: obsidian / moonstone ink, each line lit from above by a barely-there sheen.
+ *   .blog-authors       Overlapping portraits + names (components/blog/BlogAuthors.astro); ring = --blog-avatar-ring.
+ *   .blog-signal        A tiny gold dot: the page's rare accent (a live or newest state). Decorative; aria-hidden.
+ *   .blog-rails         Drafting rails with rulers just outside a box, as on the homepage (from md). Draws ::after.
+ *                       Knobs: --blog-rail-gap (box edge to rail, 1.25rem), --blog-tick-length (.75rem).
+ *   .blog-rails-rule    A drafting rule along a box's top, crossed where it meets the rails (from md). Draws ::before.
+ *                       Knob: --blog-rule-bleed (how far the rule runs past the crosses; the ruler's length).
+ *                       On an empty, aria-hidden element at a page's end it closes the drawing on whatever rule
+ *                       follows (the footer's): crosses where the rails stop, no fade (the blog index does this).
+ *                       With .blog-rails on the same box the crosses stay whole: the rails begin just below them.
+ *   .blog-marks         Artboard marks: four corner ticks just outside a box, as a design tool marks a frame.
+ *                       Draws ::before (position the box). Knobs: --blog-marks-inset (.375rem), --blog-marks-size.
+ *   .blog-hatch-text    Display letters engraved with the footer wordmark's diagonal hatch over a tint; legible as a
+ *                       title (glyphs average 3:1+, stripes 7:1+); selected, a soft wash. The hatch paints only
+ *                       inside the box: with text-box trim, pad it open past the trim (see the index's title).
+ *                       Knobs: --blog-hatch-ink, --blog-hatch-fill (the tint), --blog-hatch-size (the tile, scales
+ *                       with the type), --blog-hatch-line (stripe thickness, whatever the tile).
+ *
+ * Tokens (on .blog-materials)
+ *   --blog-ground, --blog-sheet, --blog-text, --blog-title, --blog-text-body, --blog-text-quiet, --blog-text-faint,
+ *   --blog-contour, --blog-rule, --blog-signal, --blog-highlight, --blog-shadow-rest, --blog-shadow-lifted,
+ *   --blog-shadow-pressed, --blog-ease, --blog-quick, --blog-base, --blog-slow, --blog-radius-plate.
+ *   Drafting inks, opaque mixes on the ground so a line drawn over another reads as one line:
+ *   --blog-guide (rails, rules), --blog-tick / --blog-tick-major (rulers), --blog-cross (crosses), --blog-mark.
+ *
+ * Accessibility: reduced motion drops transitions; more contrast lifts quiet text, contours and guides; forced
+ * colors and print use Canvas / CanvasText and drop the decorative guides.
+ */
+@layer components {
+  .blog-materials {
+    /* The page's own ground, the same the footer stands on, so the index never sits in a tray. */
+    --blog-ground: light-dark(var(--color-zinc-0), var(--color-zinc-95));
+    /* In dark mode a sheet rises only half a step: its contour and top light carry the edge, not a gray slab. */
+    --blog-sheet: light-dark(var(--color-surface-raised), color-mix(in oklab, var(--blog-ground) 50%, var(--color-surface-raised)));
+    --blog-text: var(--color-text-strong);
+    /*
+     * Titles inside the page: soft obsidian in light mode (a step off black, still ~16:1), a moonstone mid-tone in
+     * dark mode, so nothing outshines the page title and nothing reads as pure black or white.
+     */
+    --blog-title: light-dark(oklch(0.22 0.004 270), oklch(0.93 0.005 86));
+    --blog-text-body: var(--color-text-body);
+    --blog-text-quiet: var(--color-text-muted);
+    /* Faint still reads at 4.5:1 on the ground and on sheets. */
+    --blog-text-faint: color-mix(in oklab, var(--color-text-muted) 72%, var(--color-text-subtle));
+    --blog-contour: var(--color-line-contour);
+    --blog-rule: var(--color-line-divider);
+    /* The one accent, used sparingly: the logo's gold. */
+    --blog-signal: var(--color-amber-40);
+    --blog-highlight: light-dark(rgb(255 255 255 / 0.9), rgb(255 255 255 / 0.06));
+    /* Light from above and slightly left: an inner top light, and contact layers that fall a little right. */
+    --blog-shadow-rest:
+      inset 0 1px 0 var(--blog-highlight),
+      inset 1px 0 0 light-dark(rgb(255 255 255 / 0.4), rgb(255 255 255 / 0.02)),
+      0 0 0 1px var(--blog-contour),
+      0 0.5px 1px light-dark(oklch(18% 0 none / 0.045), oklch(0% 0 none / 0.4)),
+      0.5px 2px 4px -1px light-dark(oklch(18% 0 none / 0.03), oklch(0% 0 none / 0.24)),
+      1px 6px 14px -6px light-dark(oklch(18% 0 none / 0.03), oklch(0% 0 none / 0.24));
+    --blog-shadow-lifted:
+      inset 0 1px 0 var(--blog-highlight),
+      inset 1px 0 0 light-dark(rgb(255 255 255 / 0.4), rgb(255 255 255 / 0.02)),
+      0 0 0 1px color-mix(in oklab, var(--blog-contour), var(--color-line-divider) 40%),
+      0 0.5px 1px light-dark(oklch(18% 0 none / 0.05), oklch(0% 0 none / 0.42)),
+      0.5px 3px 6px -2px light-dark(oklch(18% 0 none / 0.04), oklch(0% 0 none / 0.28)),
+      2px 14px 32px -14px light-dark(oklch(18% 0 none / 0.08), oklch(0% 0 none / 0.42));
+    /*
+     * Pressed: the sheet settles onto the ground — contour and contact only, the cast gone. Same layer order as
+     * rest and lifted (inset layers first), so box-shadow interpolates instead of snapping.
+     */
+    --blog-shadow-pressed:
+      inset 0 1px 0 var(--blog-highlight),
+      inset 1px 0 0 light-dark(rgb(255 255 255 / 0.4), rgb(255 255 255 / 0.02)),
+      0 0 0 1px var(--blog-contour),
+      0 0.5px 1px light-dark(oklch(18% 0 none / 0.05), oklch(0% 0 none / 0.4)),
+      0.5px 1px 2px -1px transparent,
+      1px 2px 4px -2px transparent;
+    /* A soft start and a long settle: light arriving, not a switch (an expo-out curve read as a snap at 90ms). */
+    --blog-ease: cubic-bezier(0.25, 0.1, 0.25, 1);
+    --blog-quick: 200ms;
+    --blog-base: 360ms;
+    --blog-slow: 720ms;
+    --blog-radius-plate: 1.25rem;
+    /*
+     * Drafting inks (DESIGN.md: guides, rulers, crosses, marks), mixed opaque into the ground. The guide matches the
+     * homepage's rails as painted (about 15 levels off the ground in light, 14 in dark).
+     */
+    --blog-guide: light-dark(color-mix(in oklab, var(--blog-text) 6%, var(--blog-ground)), color-mix(in oklab, var(--blog-text) 7%, var(--blog-ground)));
+    --blog-tick: color-mix(in oklab, var(--blog-text) 9%, var(--blog-ground));
+    --blog-tick-major: color-mix(in oklab, var(--blog-text) 20%, var(--blog-ground));
+    --blog-cross: color-mix(in oklab, var(--color-line-control) 55%, var(--blog-ground));
+    --blog-mark: var(--blog-cross);
+    background-color: var(--blog-ground);
+    color: var(--blog-text-body);
+  }
+
+  /* ---------- A quiet sheet ---------- */
+  .blog-plate {
+    position: relative;
+    border-radius: var(--blog-radius-plate);
+    background-color: var(--blog-sheet);
+    box-shadow: var(--blog-shadow-rest);
+    transition: box-shadow var(--blog-slow) var(--blog-ease);
+
+    /* Arrival is unhurried, departure slower still, like light settling. */
+    &:is(a, button):is(:hover, :focus-visible),
+    :is(a, button):is(:hover, :focus-visible) > & {
+      box-shadow: var(--blog-shadow-lifted);
+      transition-duration: var(--blog-base);
+    }
+
+    /* A press settles it onto the ground, quickly, so a click or tap is felt. */
+    &:is(a, button):active,
+    :is(a, button):active > & {
+      box-shadow: var(--blog-shadow-pressed);
+      transition-duration: var(--blog-quick);
+    }
+  }
+
+  /* ---------- Title tone ---------- */
+  .blog-stone-text {
+    --stone-ink-top: light-dark(oklch(0.36 0.005 270), oklch(0.965 0.004 88));
+    --stone-ink: light-dark(oklch(0.21 0.004 270), oklch(0.93 0.006 86));
+    --stone-ink-bottom: light-dark(oklch(0.16 0.004 270), oklch(0.87 0.012 250));
+    color: var(--blog-text);
+
+    /*
+     * Each line is toned on its own, lit from above, so a title that wraps never darkens line by line. Without
+     * `lh` the tone spans the block; without text clipping the title keeps its plain ink.
+     */
+    @supports (background-clip: text) or (-webkit-background-clip: text) {
+      background-image: linear-gradient(180deg, var(--stone-ink-top), var(--stone-ink) 45%, var(--stone-ink-bottom));
+      background-size: 100% 1lh;
+      background-repeat: repeat-y;
+      -webkit-background-clip: text;
+      background-clip: text;
+      -webkit-text-fill-color: transparent;
+    }
+  }
+
+  /* ---------- The rare accent ---------- */
+  /* An editor's mark, not a status light: a small solid dot, no halo. */
+  .blog-signal {
+    display: inline-block;
+    flex: none;
+    width: 0.3125rem;
+    height: 0.3125rem;
+    border-radius: calc(infinity * 1px);
+    background-color: var(--blog-signal);
+  }
+
+  /* ---------- Authors ---------- */
+  .blog-authors {
+    display: inline-flex;
+    align-items: center;
+    gap: var(--spacing-sm);
+    min-width: 0;
+  }
+
+  .blog-avatar-stack {
+    isolation: isolate;
+    display: flex;
+    flex: none;
+    align-items: center;
+  }
+
+  .blog-avatar {
+    position: relative;
+    display: block;
+    flex: none;
+    width: 1.5rem;
+    height: 1.5rem;
+    border-radius: calc(infinity * 1px);
+    box-shadow: 0 0 0 2px var(--blog-avatar-ring, var(--blog-sheet));
+
+    & + & {
+      margin-inline-start: -0.375rem;
+    }
+
+    & img {
+      display: block;
+      width: 100%;
+      height: 100%;
+      margin: 0;
+      border-radius: inherit;
+      object-fit: cover;
+    }
+
+    &::after {
+      position: absolute;
+      inset: 0;
+      border-radius: inherit;
+      box-shadow: inset 0 0 0 1px light-dark(rgb(0 0 0 / 0.1), rgb(255 255 255 / 0.1));
+      pointer-events: none;
+      content: '';
+    }
+  }
+
+  .blog-author-names {
+    min-width: 0;
+    font-size: 0.8125rem;
+    line-height: 1.5;
+    color: var(--blog-text-quiet);
+  }
+
+  /*
+   * ---------- Drafting guides ----------
+   * The homepage's design-tool guides (content/home.css), for the blog. `.blog-rails` draws a rail
+   * `--blog-rail-gap` outside each side of the box from `md`, with a ruler outside each rail: a short tick every
+   * 16px and a long one every 128px, counted from the box's top. `.blog-rails-rule` draws a rule along the box's
+   * top with a cross where it meets each rail; `--blog-rule-bleed` carries the rule past the crosses. Both are
+   * decorative and sit behind the content. Tick colors are opaque mixes, so a long tick over a short one reads
+   * as one line.
+   */
+  .blog-rails,
+  .blog-rails-rule {
+    --blog-rail-gap: 1.25rem;
+    --blog-tick-length: 0.75rem;
+    --blog-rule-bleed: var(--blog-tick-length);
+    position: relative;
+    isolation: isolate;
+  }
+
+  @media (--md) {
+    /*
+     * Over the rule, as on the homepage, so the first long tick reads on it; each rail starts just below the top,
+     * so a cross drawn there by .blog-rails-rule stays whole.
+     */
+    .blog-rails::after {
+      position: absolute;
+      inset-block: 0;
+      inset-inline: calc(-1 * (var(--blog-rail-gap) + var(--blog-tick-length)));
+      z-index: -1;
+      background:
+        linear-gradient(var(--blog-tick-major) 0 1px, transparent 1px) left 0 top 0 / var(--blog-tick-length) 8rem repeat-y,
+        linear-gradient(var(--blog-tick-major) 0 1px, transparent 1px) right 0 top 0 / var(--blog-tick-length) 8rem repeat-y,
+        linear-gradient(var(--blog-tick) 0 1px, transparent 1px) left calc(var(--blog-tick-length) / 2) top 0 / calc(var(--blog-tick-length) / 2) 1rem repeat-y,
+        linear-gradient(var(--blog-tick) 0 1px, transparent 1px) right calc(var(--blog-tick-length) / 2) top 0 / calc(var(--blog-tick-length) / 2) 1rem repeat-y,
+        linear-gradient(var(--blog-guide), var(--blog-guide)) left var(--blog-tick-length) top 6px / 1px calc(100% - 6px) no-repeat,
+        linear-gradient(var(--blog-guide), var(--blog-guide)) right var(--blog-tick-length) top 6px / 1px calc(100% - 6px) no-repeat;
+      pointer-events: none;
+      content: '';
+    }
+
+    .blog-rails-rule::before {
+      position: absolute;
+      top: -5px;
+      inset-inline: calc(-1 * (var(--blog-rail-gap) + var(--blog-rule-bleed)));
+      z-index: -2;
+      height: 11px;
+      background:
+        linear-gradient(var(--blog-cross), var(--blog-cross)) left calc(var(--blog-rule-bleed) - 5px) top 5px / 11px 1px no-repeat,
+        linear-gradient(var(--blog-cross), var(--blog-cross)) left var(--blog-rule-bleed) top 0 / 1px 11px no-repeat,
+        linear-gradient(var(--blog-cross), var(--blog-cross)) right calc(var(--blog-rule-bleed) - 5px) top 5px / 11px 1px no-repeat,
+        linear-gradient(var(--blog-cross), var(--blog-cross)) right var(--blog-rule-bleed) top 0 / 1px 11px no-repeat,
+        linear-gradient(var(--blog-guide), var(--blog-guide)) 0 5px / 100% 1px no-repeat;
+      pointer-events: none;
+      content: '';
+    }
+  }
+
+  /*
+   * ---------- Artboard marks ----------
+   * Four corner ticks `--blog-marks-inset` outside a box, the way a design tool marks a frame (`.home-marks`). For
+   * open content that needs an edge without a border; a box with its own border does not take them.
+   */
+  .blog-marks {
+    --blog-marks-inset: 0.375rem;
+    --blog-marks-size: 0.5rem;
+    position: relative;
+
+    &::before {
+      position: absolute;
+      inset: calc(var(--blog-marks-inset) * -1);
+      background:
+        linear-gradient(var(--blog-mark), var(--blog-mark)) 0 0 / var(--blog-marks-size) 1px no-repeat,
+        linear-gradient(var(--blog-mark), var(--blog-mark)) 0 0 / 1px var(--blog-marks-size) no-repeat,
+        linear-gradient(var(--blog-mark), var(--blog-mark)) 100% 0 / var(--blog-marks-size) 1px no-repeat,
+        linear-gradient(var(--blog-mark), var(--blog-mark)) 100% 0 / 1px var(--blog-marks-size) no-repeat,
+        linear-gradient(var(--blog-mark), var(--blog-mark)) 0 100% / var(--blog-marks-size) 1px no-repeat,
+        linear-gradient(var(--blog-mark), var(--blog-mark)) 0 100% / 1px var(--blog-marks-size) no-repeat,
+        linear-gradient(var(--blog-mark), var(--blog-mark)) 100% 100% / var(--blog-marks-size) 1px no-repeat,
+        linear-gradient(var(--blog-mark), var(--blog-mark)) 100% 100% / 1px var(--blog-marks-size) no-repeat;
+      pointer-events: none;
+      content: '';
+    }
+  }
+
+  /*
+   * ---------- Hatched letters ----------
+   * The homepage footer's engraved wordmark (content/components/footer.css): letters filled with the site's
+   * diagonal hatch over a tint. For display sizes only. The tint draws the letterforms and the hatch gives
+   * them their grain, so `--blog-hatch-fill` decides how clearly they read and `--blog-hatch-ink` how strongly the
+   * stripes show. The stripes keep `--blog-hatch-line` thickness at any tile size, and the tile follows the type
+   * (rounded to whole pixels, so stripes stay even). Without text clipping the letters keep their plain ink.
+   */
+  .blog-hatch-text {
+    /*
+     * A fine engraving rather than bold stripes: a dense, low-contrast hatch over a tint that carries the letters.
+     * At display sizes the glyphs average 3:1 or more against the ground (large-text AA; measured at 2x) and a
+     * stripe alone 7:1 or more, in both schemes. Dark needs less ink for the same reading.
+     */
+    --blog-hatch-ink: light-dark(color-mix(in oklab, var(--blog-text) 58%, transparent), color-mix(in oklab, var(--blog-text) 54%, transparent));
+    --blog-hatch-fill: light-dark(color-mix(in oklab, var(--blog-text) 38%, transparent), color-mix(in oklab, var(--blog-text) 24%, transparent));
+    --blog-hatch-size: 5px;
+    --blog-hatch-line: 1px;
+    color: var(--blog-text);
+
+    @supports (width: round(1em, 1px)) {
+      --blog-hatch-size: max(3px, round(0.05em, 1px));
+    }
+
+    @supports (background-clip: text) or (-webkit-background-clip: text) {
+      background-image:
+        linear-gradient(135deg, var(--blog-hatch-ink) 0 var(--blog-hatch-line), transparent 0 50%, var(--blog-hatch-ink) 0 calc(50% + var(--blog-hatch-line)), transparent 0),
+        linear-gradient(var(--blog-hatch-fill), var(--blog-hatch-fill));
+      background-size: var(--blog-hatch-size) var(--blog-hatch-size), auto;
+      -webkit-background-clip: text;
+      background-clip: text;
+      -webkit-text-fill-color: transparent;
+
+      /*
+       * Selected, the letters sit on a soft wash of their own ink (as selected prose does) and, where the engine
+       * lets a selection recolor clipped text (Chromium), turn solid; elsewhere the engraving reads on the wash.
+       */
+      &::selection {
+        color: var(--blog-text);
+        background-color: color-mix(in oklab, var(--blog-text) 16%, transparent);
+        -webkit-text-fill-color: var(--blog-text);
+      }
+    }
+  }
+
+  /* ---------- Preferences ---------- */
+  @media (prefers-contrast: more) {
+    .blog-materials {
+      --blog-text-quiet: var(--blog-text-body);
+      --blog-text-faint: var(--blog-text-body);
+      --blog-contour: var(--color-line-control);
+      --blog-rule: color-mix(in oklab, var(--color-line-control) 70%, transparent);
+      --blog-guide: color-mix(in oklab, var(--blog-text) 16%, var(--blog-ground));
+      --blog-cross: var(--color-line-control);
+    }
+
+    /* The engraving keeps its grain but reads as strongly as body text. */
+    .blog-hatch-text {
+      --blog-hatch-ink: var(--blog-text);
+      --blog-hatch-fill: color-mix(in oklab, var(--blog-text) 64%, transparent);
+    }
+  }
+
+  @media (prefers-reduced-motion: reduce) {
+    .blog-plate {
+      transition: none;
+    }
+  }
+
+  @media (forced-colors: active), print {
+    .blog-rails::after,
+    .blog-rails-rule::before,
+    .blog-marks::before {
+      display: none;
+    }
+
+    .blog-hatch-text,
+    .blog-stone-text {
+      color: CanvasText;
+      background-image: none;
+      -webkit-text-fill-color: currentColor;
+    }
+
+    .blog-plate {
+      border: 1px solid CanvasText;
+      color: CanvasText;
+      background-color: Canvas;
+      box-shadow: none;
+    }
+
+    .blog-signal {
+      background-color: CanvasText;
+    }
+
+    .blog-avatar {
+      outline: 2px solid Canvas;
+    }
+  }
+}