@mafdet/cli 1.6.0 → 1.7.0

package/CHANGELOG.md

@@ -1,5 +1,9 @@
 # Changelog
 
+## 1.7.0 - 2026-11-01
+
+- Document actual Linux/native Windows package acceptance and Unicode input; distinguish controlled cancellation from physical Windows Ctrl+C and pending macOS checks.
+
 ## 1.6.0 — 2026-11-01
 
 - Align both READMEs, install tarball names and model-catalog guidance with the current release.

package/README.md

@@ -3,11 +3,11 @@
 The official Mafdet AI command line: model calls, account queries, and a
 permissioned local agent.
 
-> **1.6.0.** 中文版见 [README.zh-CN.md](./README.zh-CN.md). The CLI never
+> **1.7.0.** 中文版见 [README.zh-CN.md](./README.zh-CN.md). The CLI never
 > advertises a command it cannot serve, so `mafdet help` always lists exactly
 > what works.
 >
-> macOS and Windows are not yet verified. On Windows the command timeout uses `taskkill /T`, which is written but has never been run on a real Windows machine - so whether every grandchild process is reached there is unverified rather than fixed.
+> Linux and native Windows package/TTY approval checks are recorded below. macOS, physical Windows Ctrl+C and Windows command descendant termination remain pending.
 
 ## What Mafdet AI is
 
@@ -24,7 +24,7 @@ OpenAI API works by pointing its base URL and key at Mafdet AI.
 
 ## Requirements
 
-Package engine: Node.js 20 or newer, and a Mafdet API key. This release is validated on Linux with Node.js 22.23.4; macOS/Windows execution remains unverified.
+Package engine: Node.js 20 or newer, and a Mafdet API key. This release is exercised on Linux Node.js 22.23.4 and native Windows Node.js 24.19.0; see the precise acceptance scope below.
 
 ## Install
 
@@ -36,8 +36,8 @@ Or build it from this repository:
 
 ```bash
 pnpm --filter @mafdet/cli build
-cd packages/cli && npm pack          # -> mafdet-cli-1.6.0.tgz
-npm install -g ./mafdet-cli-1.6.0.tgz
+cd packages/cli && npm pack          # -> mafdet-cli-1.7.0.tgz
+npm install -g ./mafdet-cli-1.7.0.tgz
 ```
 
 ## The interactive session
@@ -81,10 +81,10 @@ mafdet doctor
 mafdet chat "Explain TypeScript decorators"
 ```
 
-Everything the CLI prints is ASCII, so output stays readable on a console
-running a non-UTF-8 code page (the Windows PowerShell 5.1 default). Piping a
-prompt works too, but PowerShell pipes UTF-16 by default — prefer passing the
-prompt as an argument, or use `--input <file>`.
+Model replies, prompts and paths retain Unicode. Use UTF-8 input files and pass prompts as arguments or with `--input <file>`.
+
+Actual npm packages were exercised on Linux Node 22.23.4 and native Windows Node 24.19.0: Unicode-path installation, streamed/nonstreamed chat, sessions/cost estimates, non-TTY read-only behavior and TTY file approvals. Inference uses controlled loopback responses, not a provider availability check.
+Linux Ctrl+C was exercised. Windows controlled SIGINT closes the stream without saving partial history; physical Ctrl+C and `taskkill /T` descendant cleanup still need manual acceptance. macOS remains pending because no runner is available.
 
 ## Commands
 

package/README.zh-CN.md

@@ -2,7 +2,7 @@
 
 Mafdet AI 官方命令行：模型调用、账户查询，以及一个受权限约束的本地 Agent。
 
-> **1.6.0。** 英文版见 [README.md](./README.md)。
+> **1.7.0。** 英文版见 [README.md](./README.md)。
 
 ## Mafdet AI 是什么
 
@@ -19,7 +19,7 @@ Key 换成 Mafdet AI 的就能用。
 
 ## 环境要求
 
-包声明要求 Node.js 20 或更高，以及一把 Mafdet API Key。本次验证环境为 Linux / Node.js 22.23.4；macOS/Windows 实机运行尚未验收。
+包声明要求 Node.js 20 或更高，以及一把 Mafdet API Key。本次验证环境为 Linux Node.js 22.23.4 与原生 Windows Node.js 24.19.0，具体验收范围和保留项见下文。
 
 ## 安装
 
@@ -64,13 +64,10 @@ $env:MAFDET_MODEL   = "deepseek-v4-flash"
 mafdet doctor
 ```
 
-所有用户可见输出都是纯 ASCII，因此在非 UTF-8 代码页的控制台（Windows PowerShell 5.1
-的默认状态，中文系统为 cp936）也不会变成乱码。管道传入 prompt 也可以，但 PowerShell
-默认按 UTF-16 走管道——建议直接把 prompt 作为参数，或用 `--input <文件>`。
+模型回复、提示词和文件路径保留 Unicode；中文文件请使用 UTF-8，并优先通过参数或 `--input <文件>` 输入。
 
-⚠️ **macOS 与 Windows 尚未验收**。Windows 上的命令超时终止已改用 `taskkill /T`，
-但**从未在真 Windows 上执行过**——它是否真的能杀到每一个孙子进程，属于**未验证**，
-不是「已修复」。
+实际 npm 包已在 Linux Node 22.23.4、原生 Windows Node 24.19.0 验证：中文路径安装、非流式/流式回答、会话与费用估算、非 TTY 只读及 TTY 文件修改审批。推理使用受控本地响应，不代表供应商可用性验收。
+Linux Ctrl+C 已实测；Windows 已验证受控 SIGINT 后断流且不保存半截会话，物理 Ctrl+C 与 `taskkill /T` 后代进程树仍待人工验收。macOS 因无 runner 保留待验收。
 
 ## 命令
 

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@mafdet/cli",
-  "version": "1.6.0",
+  "version": "1.7.0",
   "description": "Mafdet AI command line — model calls, account queries, and a permissioned local agent.",
   "type": "module",
   "license": "MIT",
@@ -32,12 +32,6 @@
   "publishConfig": {
     "access": "public"
   },
-  "scripts": {
-    "build": "tsc -p tsconfig.json",
-    "lint": "prettier --check \"src/**/*.ts\" \"test/**/*.mjs\" package.json tsconfig.json",
-    "test": "pnpm run build && node --test \"test/**/*.test.mjs\"",
-    "typecheck": "tsc --noEmit -p tsconfig.json"
-  },
   "dependencies": {
     "zod": "^4.6.7"
   },
@@ -47,5 +41,11 @@
   },
   "engines": {
     "node": ">=20"
+  },
+  "scripts": {
+    "build": "tsc -p tsconfig.json",
+    "lint": "prettier --check \"src/**/*.ts\" \"test/**/*.mjs\" package.json tsconfig.json",
+    "test": "pnpm run build && node --test \"test/**/*.test.mjs\"",
+    "typecheck": "tsc --noEmit -p tsconfig.json"
   }
-}
+}