@lv426/homebridge-systemair-enhanced 1.0.0 → 1.0.2

package/index.js

@@ -22,7 +22,6 @@ class SystemairVentilator {
     // These may need adjustment based on your specific device model
     this.PARAM_IDS = {
       FAN_SPEED: '1130', // Fan speed control (0=off, 2=low, 3=medium, 4=high)
-      TIMER: '1110', // Timer remaining time
       CURRENT_TEMP: '12543', // Current temperature sensor reading
       TARGET_TEMP: '2000', // Target temperature setting
       HUMIDITY: '12135', // Current humidity sensor reading
@@ -38,9 +37,6 @@ class SystemairVentilator {
     // Refresh service
     this.refreshService = new Service.Switch(this.config.name + ' Refresh');
 
-    // Timer service (using BatteryService instead of LightSensor)
-    this.timerService = new Service.BatteryService(this.config.name + ' Timer');
-
     // Thermostat service
     this.thermostatService = new Service.Thermostat(
       this.config.name + ' Thermostat'
@@ -71,11 +67,6 @@ class SystemairVentilator {
       .getCharacteristic(Characteristic.On)
       .onSet(this.setRefresh.bind(this));
 
-    // Timer characteristic (using Battery Level to store remaining time)
-    this.timerService
-      .getCharacteristic(Characteristic.BatteryLevel)
-      .onGet(this.getTimer.bind(this));
-
     // Thermostat characteristics
     this.thermostatService
       .getCharacteristic(Characteristic.CurrentTemperature)
@@ -88,9 +79,21 @@ class SystemairVentilator {
       .setProps({
         minValue: 10,
         maxValue: 38,
-        minStep: 0.5,
+        minStep: 1,
       });
 
+    this.thermostatService
+      .getCharacteristic(Characteristic.TargetHeatingCoolingState)
+      .onGet(this.getTargetHeatingCoolingState.bind(this))
+      .onSet(this.setTargetHeatingCoolingState.bind(this))
+      .setProps({
+        validValues: [0, 3], // Only OFF and AUTO modes supported
+      });
+
+    this.thermostatService
+      .getCharacteristic(Characteristic.CurrentHeatingCoolingState)
+      .onGet(this.getCurrentHeatingCoolingState.bind(this));
+
     // Humidity sensor characteristic
     this.humiditySensorService
       .getCharacteristic(Characteristic.CurrentRelativeHumidity)
@@ -176,38 +179,16 @@ class SystemairVentilator {
     }
   }
 
-  async getTimer() {
-    const url = `http://${this.config.ip}/mread?{"${this.PARAM_IDS.TIMER}":2}`;
-    this.log(`Timer: Fetching timer value from ${url}`);
-    try {
-      const response = await this.retryRequest(url);
-      let timerValue = response.data[this.PARAM_IDS.TIMER]; // Extract timer value
-
-      // Ensure timer value is valid for HomeKit (0 - 100% battery level range)
-      if (timerValue < 0) {
-        timerValue = 0;
-      } else if (timerValue > 100) {
-        timerValue = 100; // Max HomeKit battery level
-      }
-
-      this.log(`Timer: Current remaining time is ${timerValue} minutes.`);
-      return timerValue; // Return valid percentage
-    } catch (error) {
-      this.log(`Timer: Error - ${error.message}`);
-      return 0; // Default to 0% if an error occurs
-    }
-  }
-
   // Thermostat methods
   async getCurrentTemperature() {
     const url = `http://${this.config.ip}/mread?{"${this.PARAM_IDS.CURRENT_TEMP}":1}`;
     this.log(`getCurrentTemperature: Fetching from ${url}`);
     try {
       const response = await this.retryRequest(url);
-      let temperature = response.data[this.PARAM_IDS.CURRENT_TEMP] || 20; // Default to 20°C if no data
+      let temperature = response.data[this.PARAM_IDS.CURRENT_TEMP] / 10 || 20; // Default to 20°C if no data
 
-      // Ensure temperature is within HomeKit range (-270 to 100°C)
-      temperature = Math.max(-270, Math.min(100, temperature));
+      // Ensure temperature is within HomeKit range (10 to 38°C)
+      temperature = Math.max(10, Math.min(38, temperature));
 
       this.log(
         `getCurrentTemperature: Current temperature is ${temperature}°C`
@@ -224,7 +205,7 @@ class SystemairVentilator {
     this.log(`getTargetTemperature: Fetching from ${url}`);
     try {
       const response = await this.retryRequest(url);
-      let temperature = response.data[this.PARAM_IDS.TARGET_TEMP] || 20; // Default to 20°C if no data
+      let temperature = response.data[this.PARAM_IDS.TARGET_TEMP] / 10 || 20; // Default to 20°C if no data
 
       // Ensure temperature is within HomeKit target range (10-38°C)
       temperature = Math.max(10, Math.min(38, temperature));
@@ -241,7 +222,9 @@ class SystemairVentilator {
     // Ensure the value is within valid range
     value = Math.max(10, Math.min(38, value));
 
-    const url = `http://${this.config.ip}/mwrite?{"${this.PARAM_IDS.TARGET_TEMP}":${value}}`;
+    const url = `http://${this.config.ip}/mwrite?{"${
+      this.PARAM_IDS.TARGET_TEMP
+    }":${value * 10}}`;
     this.log(`setTargetTemperature: Setting target temperature to ${value}°C`);
     try {
       await this.retryRequest(url);
@@ -251,6 +234,34 @@ class SystemairVentilator {
     }
   }
 
+  async getCurrentHeatingCoolingState() {
+    // Always return Auto
+    const targetTemperature = await this.getTargetTemperature();
+    const currentTemperature = await this.getCurrentTemperature();
+
+    if (!targetTemperature) {
+      return 0; // Off
+    }
+
+    if (currentTemperature < targetTemperature) {
+      return 1; // Heating
+    } else {
+      return 2; // Cooling
+    }
+  }
+
+  async getTargetHeatingCoolingState() {
+    return this.getCurrentHeatingCoolingState();
+  }
+
+  async setTargetHeatingCoolingState(value) {
+    if (value === 0) {
+      await this.setActive(0); // Turn off the fan
+    } else {
+      await this.setActive(1); // Turn on the fan
+    }
+  }
+
   // Humidity sensor method
   async getCurrentRelativeHumidity() {
     const url = `http://${this.config.ip}/mread?{"${this.PARAM_IDS.HUMIDITY}":1}`;
@@ -274,7 +285,6 @@ class SystemairVentilator {
     return [
       this.fanService,
       this.refreshService,
-      this.timerService,
       this.thermostatService,
       this.humiditySensorService,
     ];

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@lv426/homebridge-systemair-enhanced",
-  "version": "1.0.0",
-  "description": "An enhanced Homebridge plugin for controlling SystemAir Ventilators, which includes Temperature controls and Humidity readings",
+  "version": "1.0.2",
+  "description": "An enhanced Homebridge plugin for controlling Systemair Ventilators.",
   "main": "index.js",
   "scripts": {
     "test": "echo \"Error: no test specified\" && exit 1"