@lo-tek/interfaces 0.0.0 → 0.38.0

package/src/components/frame/popover/lt-popover.ts

@@ -0,0 +1,586 @@
+import {
+  addClass,
+  defineElement,
+  HostElement,
+  isServerControlled,
+  SERVER_CONTROLLED,
+  setAttr,
+  setFlag,
+  warnAboutMarkup,
+} from "../../host-element.js"
+import {
+  isPopoverPlacement,
+  POPOVER_CLASS,
+  type PopoverPlacement,
+} from "./popover.js"
+
+export const LT_POPOVER_TAG = "lt-popover" as const
+
+/**
+ * The parts the popover finds, as selectors relative to the element. The
+ * component finds the parts with these, and the manifest describes them for
+ * whoever assembles the markup by hand, so the two cannot say different things.
+ */
+export const LT_POPOVER_PARTS = {
+  trigger: "button, [role='button']",
+  panel: `[popover], .${POPOVER_CLASS}`,
+} as const
+
+/**
+ * A panel that hangs below a button, and closes itself.
+ *
+ * The panel uses the browser's own `popover`, so it goes into the top layer
+ * and lies above everything else without `z-index`. `lt.popover()` writes
+ * `popover="manual"`, so Escape and clicks outside are handled by the
+ * component: with `auto` the browser closed the panel before the button got
+ * its click, and the button could not be used to close it again. Handwritten
+ * markup with a bare `popover` is `auto`, and then the component follows along
+ * when the browser closes it.
+ *
+ * What the top layer does not do is place the panel. `position-anchor` is not
+ * yet in every browser, so the position is worked out here.
+ *
+ * When the markup is made with JavaScript, `lt.popover()` writes the wiring:
+ * `aria-controls` on the button, and the class, the id and `popover` on the
+ * panel. When the markup comes from a template without JavaScript, the
+ * template writes a button and a panel with the class `lt-popover` and an id:
+ * the component sets `popover="manual"` and writes `aria-controls` on the
+ * button from the id. Only what is missing, so what the server wrote stays.
+ * The component sets `open` on the host, `aria-expanded` on the button and the
+ * position on the panel, and puts back everything it has written when a patch
+ * removes it. The template needs no `data-preserve-attr`.
+ *
+ * The component never writes an id on the panel. Datastar and idiomorph
+ * recognise an element by its id, and a panel with an id the server did not
+ * send was replaced on the next patch, along with focus and what the user had
+ * done in it. Without an id the panel is kept, but the button cannot be
+ * connected to it with `aria-controls`, and the component says so in the
+ * console.
+ *
+ * The repair works one way: if someone has asked for the popover to be open,
+ * it stays open through a patch. If the server sends `open`, it opens, since
+ * that is something the server actually said.
+ *
+ * For the server to decide the state, set `server-controlled` on the host.
+ * That is also the answer when the page controls `open` with an attribute from
+ * outside, as with Datastar's `data-attr:open`: a removed attribute cannot be
+ * told apart from a morph, while `menu.open = false` is a message the
+ * component can see.
+ *
+ * ```html
+ * <lt-popover placement="bottom-end">
+ *   <button class="lt-button" aria-controls="menu" aria-expanded="false">Actions</button>
+ *   <ul id="menu" class="lt-popover" popover="manual">…</ul>
+ * </lt-popover>
+ * ```
+ */
+export class LtPopover extends HostElement {
+  static observedAttributes = ["open", "placement", SERVER_CONTROLLED] as const
+
+  private panel?: HTMLElement
+  private triggerElement?: HTMLElement
+  private observer?: MutationObserver
+  /**
+   * What the component was last asked for, through the `open` property.
+   *
+   * `open` lives on the host, and a morph removes everything that is not in
+   * the server's HTML. Without anything more, every single patch closed a
+   * popover the user had just opened.
+   *
+   * A removed attribute looks the same whoever removed it, so the component
+   * cannot tell a morph from an app. The distinction is instead **how** the app
+   * says it: if it goes through the property, as in `menu.open = false`,
+   * `hide()` or `toggle()`, that is a message, and it is followed. If something
+   * sets the attribute directly, as Datastar's `data-attr:open` does, it cannot
+   * be told apart from a morph, and then the page should say
+   * `server-controlled` and let the server decide the state.
+   */
+  private wantsOpen = false
+
+  /** Whether the panel is open. Mirrored, so CSS can match the state. */
+  get open(): boolean {
+    return this.hasAttribute("open")
+  }
+
+  set open(value: boolean) {
+    // The message is noted here, and not in `show()` and `hide()`. Both go
+    // through the setter, but so does `menu.open = false` from an app, and
+    // without this the component set the attribute straight back again.
+    //
+    // No memory when the server decides the state. Without that guard the
+    // popover popped open by itself the moment `server-controlled` was removed.
+    this.wantsOpen = isServerControlled(this) ? false : value
+    setFlag(this, "open", value)
+  }
+
+  /** Which edge the panel hangs from. Default: `bottom-start`. */
+  get placement(): PopoverPlacement {
+    const value = this.getAttribute("placement")
+    return isPopoverPlacement(value) ? value : "bottom-start"
+  }
+
+  set placement(value: PopoverPlacement) {
+    setAttr(this, "placement", value)
+  }
+
+  connectedCallback(): void {
+    window.addEventListener("resize", this.reposition)
+    window.addEventListener("scroll", this.reposition, true)
+    /*
+     * The attributes are included, not only the children. `aria-expanded` on the
+     * button and the position on the panel are something the component works
+     * out, so if a patch removes them, they must come back. Every write in
+     * `sync()` compares first, or the observer would trigger itself.
+     */
+    this.observer = new MutationObserver((records) => {
+      // `type` concerns only the button. A password field in the panel that
+      // switches between `password` and `text` must not run all of `sync()`.
+      const onlyOtherTypes = records.every(
+        (record) =>
+          record.attributeName === "type" &&
+          record.target !== this.triggerElement,
+      )
+      if (!onlyOtherTypes) this.sync()
+    })
+    this.observer.observe(this, {
+      childList: true,
+      subtree: true,
+      attributes: true,
+      attributeFilter: [
+        "aria-expanded",
+        "style",
+        // The wiring the component fills in when the markup came without it.
+        "popover",
+        "id",
+        "aria-controls",
+        "class",
+        // A patch from a template without `type` removes it, and then the
+        // button submits the form again.
+        "type",
+      ],
+    })
+    this.sync()
+  }
+
+  disconnectedCallback(): void {
+    window.removeEventListener("resize", this.reposition)
+    window.removeEventListener("scroll", this.reposition, true)
+    document.removeEventListener("click", this.handleOutsideClick, true)
+    document.removeEventListener("keydown", this.handleKeydown)
+    this.observer?.disconnect()
+    this.observer = undefined
+    this.triggerElement?.removeEventListener("click", this.handleTriggerClick)
+    this.panel?.removeEventListener("toggle", this.handlePanelToggle)
+    // The reference must be reset, or `sync()` sees that the button is the
+    // same when the element is inserted again, and skips attaching the listener
+    // again. Then the panel can no longer be opened.
+    this.triggerElement = undefined
+    this.panel = undefined
+  }
+
+  attributeChangedCallback(name: string): void {
+    // `server-controlled` turned on midway: the component lets go, and the
+    // next patch decides.
+    if (name === SERVER_CONTROLLED && isServerControlled(this)) {
+      this.wantsOpen = false
+    }
+
+    if (this.isConnected) this.sync()
+  }
+
+  private sync(): void {
+    /*
+     * Puts `open` back when a patch took it.
+     *
+     * One way only: if `open` is there, the popover is open, and then either the
+     * user or the server has said so. If it is gone while the user opened it, the
+     * morph took it, and then it comes back.
+     */
+    const repairing = this.wantsOpen && !this.open && !isServerControlled(this)
+    if (repairing) {
+      /*
+       * Wait until the whole patch has landed before opening the popover again.
+       *
+       * A morph sets one attribute at a time, and `open` comes before
+       * `server-controlled` in document order. When the component repaired at
+       * once, it put `open` back while the server was in the middle of saying it
+       * was taking over the state, and the popover stayed open afterwards.
+       * `queueMicrotask` runs after the whole patch is done, and the condition is
+       * checked again there.
+       *
+       * Until then the panel stays as it is: closing it while the repair waits
+       * took the focus from a button in it to the trigger on every patch.
+       * When the repair is called off, `sync()` closes the panel for real.
+       */
+      queueMicrotask(() => {
+        if (!this.isConnected) return
+        if (!isServerControlled(this) && this.wantsOpen && !this.open)
+          setFlag(this, "open", true)
+        else this.sync()
+      })
+    }
+
+    // The parts are recognised by the wiring that must be there anyway: the
+    // panel is the one with `popover`, and the button is the one pointing to the
+    // panel with `aria-controls`. Before, the button had `slot="trigger"`, a
+    // leftover from the time the component had shadow DOM. Without a shadow
+    // root `slot` does nothing in HTML, so the attribute was a label that looked
+    // like something it was not.
+    const panel = this.findPanel()
+    if (panel) {
+      // Only what is missing. A template may have written `popover` without a
+      // value, and that is `auto`; then the component follows along when the
+      // browser closes it.
+      addClass(panel, POPOVER_CLASS)
+      if (!panel.hasAttribute("popover")) setAttr(panel, "popover", "manual")
+      // Never an id on the panel: see the comment at the top. Without an id there
+      // is nothing for `aria-controls` to point to.
+      warnAboutMarkup(
+        this,
+        "the panel has no id, so the button cannot be connected to it " +
+          "with aria-controls. Write an id on the panel in the template, " +
+          'such as id="menu", and the same value in aria-controls on the ' +
+          "button.",
+        () => {
+          const found = this.findPanel()
+          return found !== null && !found.id
+        },
+      )
+    }
+    const trigger = panel ? this.findTrigger(panel) : null
+    if (panel?.id && trigger && !trigger.hasAttribute("aria-controls")) {
+      setAttr(trigger, "aria-controls", panel.id)
+    }
+    // A `<button>` without `type` is a submit button, and so is one with an
+    // empty or unknown `type`, which a template can write. A help popover next
+    // to a field sits inside the form, and a click to open it submitted the
+    // form, or brought up the error summary, instead of showing the panel. A
+    // button that says `submit` itself is left alone.
+    if (
+      trigger instanceof HTMLButtonElement &&
+      trigger.type === "submit" &&
+      trigger.getAttribute("type")?.toLowerCase() !== "submit"
+    ) {
+      setAttr(trigger, "type", "button")
+    }
+
+    if (!trigger || !panel) {
+      /*
+       * Two different faults, and a message for each, so the developer looks in
+       * the right place. An empty element is a region the server has not filled
+       * yet, and that is not a fault in the markup.
+       */
+      const isEmpty = () => this.childElementCount === 0
+
+      if (!panel) {
+        warnAboutMarkup(
+          this,
+          "found no panel: an element with popover or the class " +
+            "lt-popover. Without one there is nothing to open or position.",
+          () => !isEmpty() && this.findPanel() === null,
+        )
+      } else {
+        warnAboutMarkup(
+          this,
+          "found no button: neither one with aria-controls pointing to " +
+            "the panel nor a <button> outside the panel. Without it the " +
+            "component does not know what opens the popover.",
+          () => {
+            const found = this.findPanel()
+            return !isEmpty() && found !== null && !this.findTrigger(found)
+          },
+        )
+      }
+
+      /*
+       * Let go of what we had. When a patch removed the panel, the component
+       * otherwise held on to a detached node, and `reposition()` kept working out
+       * the position of something that is not on the page.
+       *
+       * The listeners on `document` must go too. Without that they stayed in the
+       * capture phase for as long as the markup was broken, and a click anywhere
+       * on the page gave the app a `popover-toggle` it had not asked for.
+       */
+      this.triggerElement?.removeEventListener("click", this.handleTriggerClick)
+      this.triggerElement = undefined
+      this.panel?.removeEventListener("toggle", this.handlePanelToggle)
+      this.panel = undefined
+      document.removeEventListener("click", this.handleOutsideClick, true)
+      document.removeEventListener("keydown", this.handleKeydown)
+      return
+    }
+
+    if (this.triggerElement !== trigger) {
+      this.triggerElement?.removeEventListener("click", this.handleTriggerClick)
+      trigger.addEventListener("click", this.handleTriggerClick)
+      this.triggerElement = trigger
+    }
+    if (this.panel !== panel) {
+      if (this.panel) this.warnAboutReplacedPanel(this.panel, panel)
+      /*
+       * The state is in the markup as `:popover-open`, and is read from there.
+       * When the browser closes a `popover="auto"` itself, because another one
+       * opens or the user clicks outside, `toggle` reports it. Without the
+       * listener the host kept `open` and the button `aria-expanded="true"` over a
+       * closed panel, and the next click did nothing visible.
+       */
+      this.panel?.removeEventListener("toggle", this.handlePanelToggle)
+      panel.addEventListener("toggle", this.handlePanelToggle)
+      this.panel = panel
+    }
+
+    // Shown while a repair waits, so the button says the same as the panel.
+    const shown = this.open || repairing
+
+    // Written by the component, and set again if a patch took it.
+    setAttr(trigger, "aria-expanded", String(shown))
+
+    if (shown) {
+      if (!panel.matches(":popover-open")) panel.showPopover()
+      this.reposition()
+      document.addEventListener("click", this.handleOutsideClick, true)
+      document.addEventListener("keydown", this.handleKeydown)
+    } else {
+      if (panel.matches(":popover-open")) {
+        /*
+         * Focus in the panel goes back to the button, whatever closed it:
+         * `hide()`, `toggle()`, the server taking `open`. Otherwise it stays
+         * on a button that is no longer shown, and the next key press starts
+         * at the top of the page. Escape did this alone before. Focus
+         * elsewhere, such as a field the user clicked outside, stays.
+         */
+        const inside = panel.contains(document.activeElement)
+        panel.hidePopover()
+        if (inside) trigger.focus()
+      }
+      document.removeEventListener("click", this.handleOutsideClick, true)
+      document.removeEventListener("keydown", this.handleKeydown)
+    }
+  }
+
+  /**
+   * Says so when a patch replaced the open panel because the id from the
+   * server changed.
+   *
+   * Datastar and idiomorph recognise an element by its id, and a new id is a
+   * new element to them. The component opens the new panel again, but focus,
+   * and what the user typed in a field in it, are gone. It happens when the
+   * template builds the id from something that changes between renders, such
+   * as a random number or a counter.
+   *
+   * The message comes only when the popover was open and both panels had an id
+   * from the server, with different values. A panel without an id is kept by
+   * the morph, and a server that deliberately sends another panel while the
+   * popover is closed has nothing to fix.
+   */
+  private warnAboutReplacedPanel(lost: HTMLElement, panel: HTMLElement): void {
+    if (lost.isConnected || !this.wantsOpen) return
+    if (!lost.id || !panel.id || lost.id === panel.id) return
+
+    warnAboutMarkup(
+      this,
+      "a server update replaced the panel while it was open, because " +
+        "the panel's id was different from last time and the update did " +
+        "not recognise it. The panel is opened again, but focus and " +
+        "what the user did in it are lost; build the id from something " +
+        "that is the same every time, not from a random number or a " +
+        "counter.",
+      // The replacement has happened and cannot undo itself, unless a new
+      // update has already replaced the panel again.
+      () => !lost.isConnected && this.findPanel() === panel,
+    )
+  }
+
+  /** The panel: the one with `popover`, otherwise the one with the class. */
+  private findPanel(): HTMLElement | null {
+    return this.querySelector<HTMLElement>(LT_POPOVER_PARTS.panel)
+  }
+
+  /**
+   * The button: the one pointing to the panel with `aria-controls`, otherwise
+   * the first button outside the panel that does not point to anything else. A
+   * button with an `aria-controls` pointing elsewhere is not a fallback: then
+   * the server has said something else, and that is not to be guessed around.
+   */
+  private findTrigger(panel: HTMLElement): HTMLElement | null {
+    if (panel.id) {
+      const pointing = this.querySelector<HTMLElement>(
+        `[aria-controls="${CSS.escape(panel.id)}"]`,
+      )
+      if (pointing) return pointing
+    }
+    return (
+      [...this.querySelectorAll<HTMLElement>(LT_POPOVER_PARTS.trigger)].find(
+        (button) =>
+          !panel.contains(button) && !button.hasAttribute("aria-controls"),
+      ) ?? null
+    )
+  }
+
+  private handleTriggerClick = (): void => {
+    const closing = this.open
+    this.toggle()
+    // Safari gives a clicked button no focus: focus in the panel went to
+    // `<body>` with the click, before the panel closed, and `sync()` did not
+    // see it there. The other browsers have given the button focus already.
+    if (closing && document.activeElement === document.body)
+      this.triggerElement?.focus()
+  }
+
+  private handlePanelToggle = (event: Event): void => {
+    const state = (event as ToggleEvent).newState
+    /*
+     * The event applies only when it matches the panel. `toggle` is delivered as
+     * a separate task, after everything that happened in the same round, and can
+     * describe a state that has already changed. A patch that takes `open` on
+     * the host and `popover` on the panel in the same morph closes the panel
+     * here in `sync()`, reopens it in the microtask afterwards, and only then
+     * does "closed" arrive from the close. Before, it was taken as the user's,
+     * and the popover the user had open stayed closed after a patch that said
+     * nothing about it.
+     *
+     * The component's own `showPopover()` and `hidePopover()` also fire the
+     * event, but then `open` already matches, and nothing happens.
+     */
+    const showing = (event.currentTarget as Element).matches(":popover-open")
+    if (state === "closed" && this.open && !showing) this.hide()
+    else if (state === "open" && !this.open && showing) this.show()
+  }
+
+  private handleOutsideClick = (event: Event): void => {
+    // `composedPath()` and not `target`: when the component is in a shadow
+    // root, `target` is retargeted to the shadow host, and a click in the panel
+    // itself looked like a click outside.
+    const target = event.composedPath()[0] as Node
+    if (this.contains(target) || this.panel?.contains(target)) return
+    this.hide()
+  }
+
+  private handleKeydown = (event: KeyboardEvent): void => {
+    if (event.key !== "Escape" || !this.open) return
+    // Something else has already used the key press, such as a suggestion list
+    // that closed. Without this one press closed both the list and the popover.
+    if (event.defaultPrevented) return
+
+    // `composedPath()` and not `contains`: a field in a shadow root in the
+    // panel is not in the tree `contains` sees, and a press there closed nothing.
+    const path = event.composedPath()
+    for (const node of path) {
+      if (node === this) break
+      // An open popover inside this one is closer. It takes the press, and this
+      // one closes on the next. The listeners are both on `document`, and the
+      // outer one came first: before, it closed and left the inner one open.
+      if (node instanceof LtPopover && node.open) return
+      // A modal dialog opened on top of the popover is closed by its own press.
+      if (
+        node instanceof HTMLDialogElement &&
+        node.matches(":modal") &&
+        !node.contains(this)
+      ) {
+        return
+      }
+    }
+
+    /*
+     * Focus is moved back only when it was in the popover, or nowhere else: on
+     * `body`, or on a dialog or a `<main tabindex="-1">` the popover is in. A
+     * mouse click does not give the button focus in Safari, and inside a modal
+     * dialog the dialog gets the focus. If focus was in another field, it stays
+     * there. Before, it jumped to the button.
+     */
+    const target = path[0]
+    const fromWindow =
+      path.includes(this) || (target instanceof Node && target.contains(this))
+
+    // Used here. Without this it also closed a modal dialog the popover was
+    // in: one press took both, and the user lost the dialog.
+    event.preventDefault()
+    this.hide()
+    // Without this focus is on a panel that no longer exists, and the next
+    // key press starts at the top of the page.
+    if (fromWindow) this.triggerElement?.focus()
+  }
+
+  /** Works out where the panel goes, against the button's place on screen. */
+  private reposition = (): void => {
+    if (!this.open || !this.panel || !this.triggerElement) return
+
+    const anchor = this.triggerElement.getBoundingClientRect()
+    const panel = this.panel.getBoundingClientRect()
+    const space = 4
+
+    const below = this.placement.startsWith("bottom")
+    // `start` and `end` follow the reading direction: in a right-to-left
+    // document `start` is the button's right edge. Without this the panel was on
+    // the wrong side of the button in RTL. `:dir(rtl)` and not `direction` from
+    // `getComputedStyle`: the stylesheet flips the value with `:dir(rtl)`, so
+    // both read the HTML direction from `dir`. A page that sets
+    // `direction: rtl` in CSS without `dir` is not flipped, neither here nor in
+    // the stylesheet, as with the background icons.
+    const rtl = this.panel.matches(":dir(rtl)")
+    const alignRight = this.placement.endsWith("end") !== rtl
+
+    let top = below ? anchor.bottom + space : anchor.top - panel.height - space
+    let left = alignRight ? anchor.right - panel.width : anchor.left
+
+    // The panel must not end up off screen. If it goes out at the side, it is
+    // moved in. If there is no room on the side of the button the placement asks
+    // for, it goes on the other side, and is then clamped into the viewport
+    // either way. `top-*` lacked the last part, and a panel at the top of the
+    // page lay entirely off screen, with no way to scroll it into view.
+    left = Math.max(
+      space,
+      Math.min(left, window.innerWidth - panel.width - space),
+    )
+    if (below && top + panel.height > window.innerHeight) {
+      top = anchor.top - panel.height - space
+    } else if (!below && top < space) {
+      top = anchor.bottom + space
+    }
+    top = Math.max(
+      space,
+      Math.min(top, window.innerHeight - panel.height - space),
+    )
+
+    this.panel.style.setProperty("--lt-popover-top", `${Math.round(top)}px`)
+    this.panel.style.setProperty("--lt-popover-left", `${Math.round(left)}px`)
+  }
+
+  private emit(open: boolean): void {
+    this.dispatchEvent(
+      new CustomEvent("popover-toggle", {
+        detail: { open },
+        bubbles: true,
+        composed: true,
+      }),
+    )
+  }
+
+  /**
+   * Opens the panel. Through the setter also when it is open already, as
+   * when the server sent `open`: the call is the app's message, and without
+   * it the next patch without `open` closed the panel.
+   */
+  show(): void {
+    const was = this.open
+    this.open = true
+    if (!was) this.emit(true)
+  }
+
+  /** Closes the panel. Through the setter also when it is closed, as `show()`. */
+  hide(): void {
+    const was = this.open
+    this.open = false
+    if (was) this.emit(false)
+  }
+
+  /** Opens or closes. */
+  toggle(): void {
+    if (this.open) this.hide()
+    else this.show()
+  }
+}
+
+export function defineLtPopover(tagName: string = LT_POPOVER_TAG): void {
+  defineElement(tagName, LtPopover)
+}

package/src/components/frame/popover/popover.css

@@ -0,0 +1,50 @@
+@layer lotek {
+  lt-popover {
+    display: contents;
+  }
+
+  .lt-popover {
+    /* The panel is in the top layer, so the position is relative to the
+       viewport. The values are set by the component, which works them out
+       against the button. */
+    position: fixed;
+    inset: auto;
+    inset-block-start: var(--lt-popover-top, 0);
+    inset-inline-start: var(--lt-popover-left, 0);
+    margin: 0;
+    /* The panel is often a `<ul>` of actions. The reset belongs here and
+       not with the consumer: `data-variant="plain"` matched no rule on
+       `.lt-popover`, so the list kept the browser's bullets. The indent was
+       already gone, since `padding` is set in the same rule. */
+    list-style: none;
+    box-sizing: border-box;
+    inline-size: max-content;
+    max-inline-size: var(
+      --lt-popover-width,
+      min(20rem, calc(100vw - var(--lt-spacing-8)))
+    );
+    padding: var(--lt-popover-padding, var(--lt-spacing-3));
+    font-family: inherit;
+    font-size: var(--lt-font-size-m);
+    line-height: var(--lt-line-height-default);
+    color: var(--lt-color-neutral-text-strong);
+    background: var(--lt-color-neutral-canvas);
+    border: 1px solid var(--lt-color-neutral-border-subtle);
+    border-radius: var(--lt-popover-radius, var(--lt-spacing-1));
+    box-shadow: var(--lt-shadow-overlay);
+  }
+
+  /* The position is physical: `--lt-popover-left` is the distance from the
+     left edge of the viewport, worked out against the button.
+     `inset-inline-start` is the right edge in a right-to-left document, so
+     there it is flipped, the way background icons are flipped with
+     `:dir(rtl)`. */
+  .lt-popover:dir(rtl) {
+    inset-inline-start: auto;
+    inset-inline-end: var(--lt-popover-left, 0);
+  }
+
+  .lt-popover:not(:popover-open) {
+    display: none;
+  }
+}