@litfamily/litopencode 1.0.37 → 1.0.38

package/CHANGELOG.md

@@ -5,6 +5,16 @@ are tracked separately from this product history.
 
 ## Unreleased
 
+## 1.0.38 - 2026-11-02
+
+- Dependency alerts cleared: zod 4.6.6 (the runtime dependency and the Remotion cover template), the audio runtime's msgpack 1.2.3, @hono/node-server 2.1.5 in the HyperFrames cover template, and toml 5.0.1 in the development tree.
+- Releases are faster: the publish workflow no longer repeats the test suite and the QA probes. It checks with GitHub that CI already passed on the exact commit being released and stops if it did not. A publish from your own machine still runs the full suite first.
+- On OpenCode 2 the footer line beside the prompt now steps down with the terminal width instead of being clipped by the host: the ignition mark with the whole stage chip, the mark with a smaller chip, the chip alone, `🔥 1/3`, the bare flame, then nothing. Before, a narrow terminal cut the mark mid-word and mangled the host's own figures next to it.
+- On OpenCode 2 the status card shows the OpenCode Go plan windows (`5h 42% · 1w 18%`) for sessions on the `opencode-go` provider, read from the host's usage source and asked at most once a minute. Other providers and signed-out hosts show nothing, because OpenCode 2 gives a plugin no other usage data.
+- The automatic-handoff notices now reach the screen on OpenCode 2. The server plugin cannot raise a toast there, so it leaves each notice in `.litopencode/notices.jsonl` and the TUI plugin shows it.
+- Automatic handoff now fires on OpenCode 2. The plugin waited for a `session.status` or `session.idle` event that OpenCode 2 never publishes, so a turn that crossed the percent was never followed by the handoff request. It now reads the end of a turn from `session.execution.succeeded`, `failed` and `interrupted` (and the start from `session.execution.started`), which also records the session as idle for the status card.
+- A flaky test of the alias goal path now waits for the ledger event instead of only the goal in the fake host, so slow runners no longer fail it.
+
 ## 1.0.37 - 2026-11-01
 
 - `lit-typographic-motion` films can now carry real keyed footage, such as a reaction clip or a spinning-cat loop shot on a green screen. Key it outside the renderer into 8-bit RGBA PNG frames, put them in `stage/clips/<folder>/` and list them in `stage/clips/clips.json` (`id`, `dir`, `count`, `fps`). The page loads `/lit/clips.js`, registers a clip once with `LitStage.clip({ parent, id, box })` and shows it from `render(t)`; the frame is picked from film time, so a cue is plain arithmetic and the determinism replay holds. A declared clip is checked against its bytes (12 clips, 360 frames each and 1500 in all, 40 MB each and 128 MB in all, 720 px on the long side, up to 30 fps, real transparency) and is exempt from the flipbook rule; any frame sequence you did not declare is still refused with exit 17. A cover takes no clips. The flash audit and the text checks run on the final pixels, and the report lists each clip. `LitStage.clip.circle`, `wipe` and `iris` keep working.

package/README-Ko-KR.md

@@ -1,13 +1,13 @@
-<p align="center"><picture><source media="(prefers-reduced-motion: reduce)" srcset="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/assets/cover-motion-still.webp" /><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/assets/cover-motion.webp" width="100%" alt="LitFamily 모션 커버: 일곱 로봇 패널이 차례로 켜지고, LitOpenCode 로봇의 눈과 테두리가 빛난 뒤 LITFAMILY와 KEEP THE WORK LIT. 문구가 밝아지는 영상" /></picture></p>
+<p align="center"><picture><source media="(prefers-reduced-motion: reduce)" srcset="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/assets/cover-motion-still.webp" /><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/assets/cover-motion.webp" width="100%" alt="LitFamily 모션 커버: 일곱 로봇 패널이 차례로 켜지고, LitOpenCode 로봇의 눈과 테두리가 빛난 뒤 LITFAMILY와 KEEP THE WORK LIT. 문구가 밝아지는 영상" /></picture></p>
 
 # LitOpenCode
 
 **LitOpenCode는 OpenCode용 워크플로 플러그인입니다. 프롬프트에 `lit`만 붙이면 계획하고, 만들고, 확인하고, 기록까지 남겨서 다음 세션이 어디서 멈췄는지 바로 압니다.**
 
 <p align="center">
-<a href="https://www.npmjs.com/package/@litfamily/litopencode"><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/assets/readme/badge-version.svg" alt="1.0.37" /></a>
+<a href="https://www.npmjs.com/package/@litfamily/litopencode"><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/assets/readme/badge-version.svg" alt="1.0.38" /></a>
 <a href="https://www.npmjs.com/package/@litfamily/litopencode"><img src="https://img.shields.io/npm/dm/@litfamily/litopencode?label=downloads&color=D7F75B" alt="월간 npm 다운로드 수" /></a>
-<a href="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/LICENSE"><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/assets/readme/badge-license.svg" alt="MIT 라이선스" /></a>
+<a href="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/LICENSE"><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/assets/readme/badge-license.svg" alt="MIT 라이선스" /></a>
 <a href="https://github.com/wjgoarxiv/litopencode"><img src="https://img.shields.io/github/stars/wjgoarxiv/litopencode?style=social" alt="GitHub 스타" /></a>
 </p>
 
@@ -57,9 +57,9 @@ npm uninstall -g @litfamily/litopencode
 ## 더 보기
 
 - [GitHub의 사용 안내](https://github.com/wjgoarxiv/litopencode/blob/main/docs/guide-Ko-KR.md): 설치 옵션, 자동 인수인계, 문제 해결, 제거
-- [워크플로 상세 안내](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/reference-Ko-KR.md) · [English reference](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/reference.md)
-- [마이그레이션 안내](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/migration.md) · [Changelog](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/CHANGELOG.md) · [개인정보와 네트워크 동작](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/privacy.md)
-- [LitFamily 허브](https://github.com/wjgoarxiv/litfamily) · [MIT 라이선스](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/LICENSE) · [상표 정책](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/TRADEMARK.md) · [ASCII 글꼴 라이선스](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/assets/readme/JetBrainsMono-OFL.txt)
+- [워크플로 상세 안내](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/reference-Ko-KR.md) · [English reference](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/reference.md)
+- [마이그레이션 안내](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/migration.md) · [Changelog](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/CHANGELOG.md) · [개인정보와 네트워크 동작](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/privacy.md)
+- [LitFamily 허브](https://github.com/wjgoarxiv/litfamily) · [MIT 라이선스](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/LICENSE) · [상표 정책](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/TRADEMARK.md) · [ASCII 글꼴 라이선스](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/assets/readme/JetBrainsMono-OFL.txt)
 
 <details>
 <summary>ASCII 로고 복사</summary>

package/README.md

@@ -1,13 +1,13 @@
-<p align="center"><picture><source media="(prefers-reduced-motion: reduce)" srcset="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/assets/cover-motion-still.webp" /><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/assets/cover-motion.webp" width="100%" alt="LitFamily motion cover: seven armored robots power on one by one, the LitOpenCode robot wakes with glowing eyes and a lit frame, then LITFAMILY and KEEP THE WORK LIT. light up." /></picture></p>
+<p align="center"><picture><source media="(prefers-reduced-motion: reduce)" srcset="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/assets/cover-motion-still.webp" /><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/assets/cover-motion.webp" width="100%" alt="LitFamily motion cover: seven armored robots power on one by one, the LitOpenCode robot wakes with glowing eyes and a lit frame, then LITFAMILY and KEEP THE WORK LIT. light up." /></picture></p>
 
 # LitOpenCode
 
 **LitOpenCode is a workflow plugin for OpenCode. Add `lit` to a prompt and the work gets planned, built, checked and written down, so the next session knows where you stopped.**
 
 <p align="center">
-<a href="https://www.npmjs.com/package/@litfamily/litopencode"><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/assets/readme/badge-version.svg" alt="1.0.37" /></a>
+<a href="https://www.npmjs.com/package/@litfamily/litopencode"><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/assets/readme/badge-version.svg" alt="1.0.38" /></a>
 <a href="https://www.npmjs.com/package/@litfamily/litopencode"><img src="https://img.shields.io/npm/dm/@litfamily/litopencode?label=downloads&color=D7F75B" alt="npm downloads per month" /></a>
-<a href="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/LICENSE"><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/assets/readme/badge-license.svg" alt="MIT license" /></a>
+<a href="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/LICENSE"><img src="https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/assets/readme/badge-license.svg" alt="MIT license" /></a>
 <a href="https://github.com/wjgoarxiv/litopencode"><img src="https://img.shields.io/github/stars/wjgoarxiv/litopencode?style=social" alt="GitHub stars" /></a>
 </p>
 
@@ -57,9 +57,9 @@ npm uninstall -g @litfamily/litopencode
 ## More
 
 - [Guide on GitHub](https://github.com/wjgoarxiv/litopencode/blob/main/docs/guide.md): install options, automatic handoff, troubleshooting and removal.
-- [Workflow reference](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/reference.md)
-- [Migration notes](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/migration.md) · [Changelog](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/CHANGELOG.md) · [Privacy and network behavior](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/privacy.md)
-- [LitFamily hub](https://github.com/wjgoarxiv/litfamily) · [MIT license](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/LICENSE) · [Trademark policy](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/TRADEMARK.md) · [ASCII font license](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.37/docs/assets/readme/JetBrainsMono-OFL.txt)
+- [Workflow reference](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/reference.md)
+- [Migration notes](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/migration.md) · [Changelog](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/CHANGELOG.md) · [Privacy and network behavior](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/privacy.md)
+- [LitFamily hub](https://github.com/wjgoarxiv/litfamily) · [MIT license](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/LICENSE) · [Trademark policy](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/TRADEMARK.md) · [ASCII font license](https://cdn.jsdelivr.net/npm/@litfamily/litopencode@1.0.38/docs/assets/readme/JetBrainsMono-OFL.txt)
 
 <details>
 <summary>Copy ASCII logo</summary>

package/dist/state.d.ts

@@ -18,6 +18,7 @@ export type RuntimePaths = {
     knowledgeDir: string;
     knowledgeClaimsFile: string;
     autoHandoffFile: string;
+    noticesFile: string;
     workflowStackDir: string;
     adhdDir: string;
     livenessDir: string;

package/dist/state.js

@@ -34,6 +34,7 @@ export function createRuntimePaths(projectRoot) {
         knowledgeDir: path.join(runtimeDir, "knowledge"),
         knowledgeClaimsFile: path.join(runtimeDir, "knowledge", "claims.jsonl"),
         autoHandoffFile: path.join(runtimeDir, "auto-handoff.json"),
+        noticesFile: path.join(runtimeDir, "notices.jsonl"),
         workflowStackDir: path.join(runtimeDir, "workflow-stack"),
         adhdDir: path.join(runtimeDir, "adhd"),
         livenessDir: path.join(runtimeDir, "liveness"),

package/dist/tools.d.ts

@@ -10,34 +10,44 @@ export declare const litOpenCodeTools: Readonly<{
         args: Readonly<{
             [k: string]: import("zod/v4/core").$ZodType<unknown, unknown, import("zod/v4/core").$ZodTypeInternals<unknown, unknown>>;
         }>;
-        execute(args: Record<string, unknown>, context: import("@opencode-ai/plugin").ToolContext): Promise<ToolResult>;
+        execute(args: {
+            [x: string]: unknown;
+        }, context: import("@opencode-ai/plugin").ToolContext): Promise<ToolResult>;
     };
     litwork: {
         description: string;
         args: Readonly<{
             [k: string]: import("zod/v4/core").$ZodType<unknown, unknown, import("zod/v4/core").$ZodTypeInternals<unknown, unknown>>;
         }>;
-        execute(args: Record<string, unknown>, context: import("@opencode-ai/plugin").ToolContext): Promise<ToolResult>;
+        execute(args: {
+            [x: string]: unknown;
+        }, context: import("@opencode-ai/plugin").ToolContext): Promise<ToolResult>;
     };
     "start-work": {
         description: string;
         args: Readonly<{
             [k: string]: import("zod/v4/core").$ZodType<unknown, unknown, import("zod/v4/core").$ZodTypeInternals<unknown, unknown>>;
         }>;
-        execute(args: Record<string, unknown>, context: import("@opencode-ai/plugin").ToolContext): Promise<ToolResult>;
+        execute(args: {
+            [x: string]: unknown;
+        }, context: import("@opencode-ai/plugin").ToolContext): Promise<ToolResult>;
     };
     "review-work": {
         description: string;
         args: Readonly<{
             [k: string]: import("zod/v4/core").$ZodType<unknown, unknown, import("zod/v4/core").$ZodTypeInternals<unknown, unknown>>;
         }>;
-        execute(args: Record<string, unknown>, context: import("@opencode-ai/plugin").ToolContext): Promise<ToolResult>;
+        execute(args: {
+            [x: string]: unknown;
+        }, context: import("@opencode-ai/plugin").ToolContext): Promise<ToolResult>;
     };
     wikify: {
         description: string;
         args: Readonly<{
             [k: string]: import("zod/v4/core").$ZodType<unknown, unknown, import("zod/v4/core").$ZodTypeInternals<unknown, unknown>>;
         }>;
-        execute(args: Record<string, unknown>, context: import("@opencode-ai/plugin").ToolContext): Promise<ToolResult>;
+        execute(args: {
+            [x: string]: unknown;
+        }, context: import("@opencode-ai/plugin").ToolContext): Promise<ToolResult>;
     };
 }>;

package/dist/tui/mission-band.d.ts

@@ -36,6 +36,13 @@ export type CardFigures = {
     readonly branch?: string;
     readonly inLane: boolean;
     readonly restartTo?: string;
+    readonly limits?: readonly CardLimit[];
+};
+/** A plan window the host reports (`5h 42%`), shown after the context figure; absent when the host reports none. */
+export type CardLimit = {
+    readonly label: string;
+    readonly percent: number;
+    readonly limited: boolean;
 };
 export type CardInputs = {
     readonly view: MissionView;

package/dist/tui/mission-band.js

@@ -150,6 +150,7 @@ function topLine(view, frame, palette, width, border, rest, mark) {
     }
     return fitLine([{ text: "╭" + "─".repeat(Math.max(0, width)), fg: border }], width, palette);
 }
+const limitWarnPercent = 90;
 /** The figures in the bottom border, most important first; the last ones go first when room runs out. */
 function figureParts(view, figures, palette) {
     const parts = [];
@@ -159,6 +160,9 @@ function figureParts(view, figures, palette) {
         const percent = Math.round(figures.contextPercent);
         parts.push({ text: `ctx ${percent}%`, fg: percent >= contextWarnPercent ? palette.warning : palette.muted });
     }
+    for (const limit of figures.limits ?? []) {
+        parts.push({ text: `${limit.label} ${limit.percent}%${limit.limited ? " limited" : ""}`, fg: limit.limited || limit.percent >= limitWarnPercent ? palette.warning : palette.muted });
+    }
     if (view.active)
         parts.push({ text: `⟳ ${elapsedText(view.elapsedMinutes)}${figures.inLane ? " · in lane" : ""}`, fg: palette.muted });
     if (figures.branch !== undefined)

package/dist/tui/mission-text.d.ts

@@ -100,13 +100,13 @@ export declare function groupsWidth(groups: readonly ChipGroup[]): number;
 export declare function fade(segment: Segment, alpha: number, palette: MissionPalette): Segment;
 export declare const chipSparkWidth = 7;
 export declare function chipSparkCells(t: number, palette: MissionPalette): Segment[] | undefined;
-export declare function chipTier(view: MissionView, frame: MotionFrame, palette: MissionPalette, budget: number): ChipTier;
+export declare function chipTier(view: MissionView, frame: MotionFrame, palette: MissionPalette, budget: number, largest?: ChipTier): ChipTier;
 /**
  * The map chip on the right of the prompt's agent/model row: `🔥 LIT  plan ✓ › WORK ▰▰▰▱▱▱▱ 3/7 › review`,
  * then the live step when the full chip leaves room for it, shedding labels before values as `budget`
- * shrinks. Idle sessions render nothing.
+ * shrinks, and never larger than `largest`. Idle sessions render nothing.
  */
-export declare function chipLine(view: MissionView, frame: MotionFrame, palette: MissionPalette, budget: number): Line;
+export declare function chipLine(view: MissionView, frame: MotionFrame, palette: MissionPalette, budget: number, largest?: ChipTier): Line;
 /** The header status: a glyph and words, or the COMPLETE badge that pops in and settles to green text. */
 export declare function statusSegments(view: MissionView, frame: MotionFrame, palette: MissionPalette): {
     readonly segments: Segment[];

package/dist/tui/mission-text.js

@@ -396,8 +396,8 @@ export function chipSparkCells(t, palette) {
     }
     return cells;
 }
-export function chipTier(view, frame, palette, budget) {
-    for (const tier of ["full", "medium"]) {
+export function chipTier(view, frame, palette, budget, largest = "full") {
+    for (const tier of largest === "full" ? ["full", "medium"] : largest === "medium" ? ["medium"] : []) {
         if (groupsWidth(chipGroups(view, frame, palette, tier)) <= budget)
             return tier;
     }
@@ -406,12 +406,12 @@ export function chipTier(view, frame, palette, budget) {
 /**
  * The map chip on the right of the prompt's agent/model row: `🔥 LIT  plan ✓ › WORK ▰▰▰▱▱▱▱ 3/7 › review`,
  * then the live step when the full chip leaves room for it, shedding labels before values as `budget`
- * shrinks. Idle sessions render nothing.
+ * shrinks, and never larger than `largest`. Idle sessions render nothing.
  */
-export function chipLine(view, frame, palette, budget) {
+export function chipLine(view, frame, palette, budget, largest = "full") {
     if (!view.active)
         return [];
-    const tier = chipTier(view, frame, palette, budget);
+    const tier = chipTier(view, frame, palette, budget, largest);
     const groups = chipGroups(view, frame, palette, tier);
     if (tier === "full") {
         const live = liveSegments(view, frame, palette, 24);

package/dist/v2/events.d.ts

@@ -36,7 +36,7 @@ export type EventModelLike = {
 };
 export type V2EventOptions = {
     readonly projectRoot: string;
-    readonly paths: Pick<RuntimePaths, "autoHandoffFile">;
+    readonly paths: Pick<RuntimePaths, "autoHandoffFile"> & Partial<Pick<RuntimePaths, "noticesFile">>;
     readonly autoHandoffConfig: AutoHandoffConfig;
     readonly boundedAuthority: BoundedAuthorityOptions;
     readonly getSession: SessionLookup;

package/dist/v2/events.js

@@ -1,6 +1,7 @@
 import { createAutoHandoff } from "../auto-handoff-hooks.js";
 import { LifecycleConflictError, LifecycleSafetyError, createBoundedAuthorityLifecycle, parseFencedProgress } from "../bounded-authority.js";
 import { markLiveness } from "../session-liveness.js";
+import { appendNotice } from "./notices.js";
 function isRecord(value) {
     return typeof value === "object" && value !== null && !Array.isArray(value);
 }
@@ -9,10 +10,20 @@ function str(value) {
 }
 /**
  * The calls the OpenCode 1 automatic handoff makes, answered by OpenCode 2. There is no server toast on
- * OpenCode 2, so the client has no `tui`; the handoff's own notices are not shown there.
+ * OpenCode 2, so `tui.showToast` leaves the notice in the project's notices file, which the TUI plugin
+ * reads and shows (notices.ts). Without a notices file the call is accepted and dropped.
  */
-function handoffClient(session, model, statuses) {
+function handoffClient(session, model, statuses, noticesFile) {
     const client = {
+        tui: {
+            async showToast(input) {
+                const body = input.body;
+                if (noticesFile !== undefined && body !== undefined && typeof body.message === "string") {
+                    appendNotice(noticesFile, { title: body.title ?? "🔥 LIT", message: body.message, variant: (body.variant ?? "info"), duration: body.duration ?? 8000 });
+                }
+                return { data: true };
+            }
+        },
         session: {
             async promptAsync(input) {
                 const text = [input.body.system, ...(input.body.parts ?? []).map((part) => part.text)].filter((part) => typeof part === "string" && part !== "").join("\n\n");
@@ -50,7 +61,7 @@ export function createV2Events(options) {
     const autoHandoff = createAutoHandoff({
         projectRoot: options.projectRoot,
         paths: options.paths,
-        client: handoffClient(options.session, options.model, statuses),
+        client: handoffClient(options.session, options.model, statuses, options.paths.noticesFile),
         config: options.autoHandoffConfig,
         getSession: options.getSession
     });
@@ -88,6 +99,11 @@ export function createV2Events(options) {
             throw error;
         }
     }
+    async function idle(sessionID) {
+        statuses.set(sessionID, { type: "idle" });
+        await markLiveness(options.projectRoot, sessionID, "idle");
+        await toHandoff("session.idle", { sessionID });
+    }
     async function handle(event) {
         const data = isRecord(event.data) ? event.data : {};
         const sessionID = str(data.sessionID);
@@ -135,13 +151,23 @@ export function createV2Events(options) {
                 });
                 return;
             }
+            // OpenCode 2.2.5 publishes no `session.status` or `session.idle`. A turn runs from
+            // `session.execution.started` to one of three endings, and the handoff reads them as busy and idle.
+            case "session.execution.started":
+                statuses.set(sessionID, { type: "busy" });
+                await toHandoff("session.status", { sessionID, status: { type: "busy" } });
+                return;
+            case "session.execution.succeeded":
+            case "session.execution.failed":
+            case "session.execution.interrupted":
+                await idle(sessionID);
+                return;
             case "session.status":
                 statuses.set(sessionID, data.status);
                 await toHandoff("session.status", { sessionID, status: data.status });
                 return;
             case "session.idle":
-                await markLiveness(options.projectRoot, sessionID, "idle");
-                await toHandoff("session.idle", { sessionID });
+                await idle(sessionID);
                 return;
             case "session.compaction.ended":
                 await toHandoff("session.compacted", { sessionID });

package/dist/v2/notices.d.ts

@@ -0,0 +1,13 @@
+export type NoticeVariant = "info" | "success" | "warning" | "error";
+export type TuiNotice = {
+    readonly title: string;
+    readonly message: string;
+    readonly variant: NoticeVariant;
+    readonly duration: number;
+};
+/** Leaves one popup for the TUI. Best effort: a place that cannot be written loses the notice, never the caller. */
+export declare function appendNotice(file: string, notice: TuiNotice): void;
+/** Reads the notices that appear after it was made. Each call returns the new ones once, oldest first. */
+export declare function createNoticeTail(file: string): {
+    readonly poll: () => readonly TuiNotice[];
+};

package/dist/v2/notices.js

@@ -0,0 +1,143 @@
+// The way a server-side popup reaches the screen on OpenCode 2. The server plugin's context only subscribes to
+// events, so it cannot raise a toast; the TUI plugin can, but it knows nothing of the server's state machines
+// (the automatic handoff). The server therefore appends each popup it would have shown to a small file under
+// the project's .litopencode, and the TUI reads the lines that appear after it started and toasts them. Both
+// halves ship in this package; neither needs the other to be there. A symbolic link in place of the file is
+// never followed, a torn line waits for its newline, and the file is rewritten to its newest lines past a cap.
+import fs from "node:fs";
+import path from "node:path";
+const variants = new Set(["info", "success", "warning", "error"]);
+const titleCells = 80;
+const messageCells = 400;
+const minDuration = 1000;
+const maxDuration = 15_000;
+const defaultDuration = 8000;
+const capBytes = 64_000;
+const keepBytes = 24_000;
+const readCapBytes = 128_000;
+const seenLimit = 64;
+let counter = 0;
+function clip(value, max) {
+    const chars = [...value];
+    return chars.length <= max ? value : `${chars.slice(0, max - 1).join("")}…`;
+}
+function clean(value) {
+    if (typeof value !== "object" || value === null)
+        return undefined;
+    const entry = value;
+    if (typeof entry.title !== "string" || typeof entry.message !== "string" || entry.message === "")
+        return undefined;
+    if (typeof entry.variant !== "string" || !variants.has(entry.variant))
+        return undefined;
+    const duration = typeof entry.duration === "number" && Number.isFinite(entry.duration) ? Math.min(maxDuration, Math.max(minDuration, entry.duration)) : defaultDuration;
+    return { title: clip(entry.title, titleCells), message: clip(entry.message, messageCells), variant: entry.variant, duration };
+}
+function plainFile(file) {
+    try {
+        const stat = fs.lstatSync(file);
+        return stat.isFile() ? stat : undefined;
+    }
+    catch {
+        return undefined;
+    }
+}
+function trimToNewest(file) {
+    const text = fs.readFileSync(file, "utf8");
+    const lines = text.split("\n").filter((line) => line !== "");
+    const kept = [];
+    let size = 0;
+    for (let index = lines.length - 1; index >= 0; index -= 1) {
+        size += Buffer.byteLength(lines[index]) + 1;
+        if (size > keepBytes)
+            break;
+        kept.unshift(lines[index]);
+    }
+    const temp = `${file}.${process.pid}.tmp`;
+    fs.writeFileSync(temp, kept.length === 0 ? "" : `${kept.join("\n")}\n`);
+    fs.renameSync(temp, file);
+}
+/** Leaves one popup for the TUI. Best effort: a place that cannot be written loses the notice, never the caller. */
+export function appendNotice(file, notice) {
+    const cleaned = clean(notice);
+    if (cleaned === undefined)
+        return;
+    try {
+        fs.mkdirSync(path.dirname(file), { recursive: true });
+        const existing = (() => {
+            try {
+                return fs.lstatSync(file);
+            }
+            catch {
+                return undefined;
+            }
+        })();
+        if (existing !== undefined && !existing.isFile())
+            return;
+        counter += 1;
+        const stored = { id: `${Date.now().toString(36)}-${process.pid}-${counter}`, at: Date.now(), ...cleaned };
+        fs.appendFileSync(file, `${JSON.stringify(stored)}\n`);
+        if ((plainFile(file)?.size ?? 0) > capBytes)
+            trimToNewest(file);
+    }
+    catch { // no-excuse-ok: catch -- a popup is best-effort feedback; the handoff itself must never stop for it.
+    }
+}
+/** Reads the notices that appear after it was made. Each call returns the new ones once, oldest first. */
+export function createNoticeTail(file) {
+    let offset = plainFile(file)?.size ?? 0;
+    const seen = [];
+    return {
+        poll() {
+            const stat = plainFile(file);
+            if (stat === undefined)
+                return [];
+            // A smaller file was rewritten to its newest lines; read it again and let the ids drop what was shown.
+            if (stat.size < offset)
+                offset = 0;
+            if (stat.size === offset)
+                return [];
+            const length = Math.min(stat.size - offset, readCapBytes);
+            const buffer = Buffer.alloc(length);
+            let fd;
+            try {
+                fd = fs.openSync(file, fs.constants.O_RDONLY | (fs.constants.O_NOFOLLOW ?? 0));
+                fs.readSync(fd, buffer, 0, length, offset);
+            }
+            catch {
+                return [];
+            }
+            finally {
+                if (fd !== undefined)
+                    fs.closeSync(fd);
+            }
+            const text = buffer.toString("utf8");
+            const end = text.lastIndexOf("\n");
+            if (end < 0)
+                return length === readCapBytes ? (offset += length, []) : [];
+            offset += Buffer.byteLength(text.slice(0, end + 1));
+            const out = [];
+            for (const line of text.slice(0, end).split("\n")) {
+                let parsed;
+                try {
+                    parsed = JSON.parse(line);
+                }
+                catch {
+                    continue;
+                }
+                const id = typeof parsed?.id === "string" ? parsed.id : undefined;
+                if (id !== undefined && seen.includes(id))
+                    continue;
+                const entry = clean(parsed);
+                if (entry === undefined)
+                    continue;
+                if (id !== undefined) {
+                    seen.push(id);
+                    if (seen.length > seenLimit)
+                        seen.shift();
+                }
+                out.push(entry);
+            }
+            return out;
+        }
+    };
+}

package/dist/v2/tui-footer.d.ts

@@ -0,0 +1,20 @@
+import type { MissionView } from "../tui/mission-model.ts";
+import type { MotionFrame } from "../tui/mission-motion.ts";
+import { type Line, type MissionPalette } from "../tui/mission-text.ts";
+/** The session sidebar, which a wide terminal is taken to have open (the setting is not readable by a plugin). */
+export declare const sidebarCells = 42;
+export declare function footerBudget(input: {
+    readonly columns: number;
+    readonly sidebar: boolean;
+    readonly busy: boolean;
+}): number;
+export type FooterInput = {
+    /** The discipline the latest lit prompt started, as the server wrote it into the message. */
+    readonly name: string;
+    readonly view: MissionView | undefined;
+    readonly frame: MotionFrame;
+    readonly palette: MissionPalette;
+    readonly budget: number;
+};
+/** The footer line for `budget` cells, as segments; empty when not even the flame fits. */
+export declare function footerStatus(input: FooterInput): Line;

package/dist/v2/tui-footer.js

@@ -0,0 +1,56 @@
+// What OpenCode 2's prompt footer row holds besides our line, and how our line steps down to the room left.
+// The row is the host's spinner and `esc interrupt` hint on the left and its token, goal and `ctrl+p commands`
+// figures on the right; our line is squeezed between them, and the host clips it mid-word when it is too long.
+// So the line is chosen by width: the ignition mark with the whole stage chip, the chip at a smaller size,
+// the chip as `🔥 1/3`, the bare flame, then nothing. The numbers were measured on opencode2 2.2.5.
+import { activationDiscipline } from "../activation-probe.js";
+import { cellWidth, chipLine, lineWidth } from "../tui/mission-text.js";
+/** The session sidebar, which a wide terminal is taken to have open (the setting is not readable by a plugin). */
+export const sidebarCells = 42;
+// Right of our line: with a turn running `↓ 1 shell · ◎ goal  ctrl+p commands`, idle `◎ goal paused · 42.3K (8%) · $0.07  ctrl+p commands`.
+const hostRightBusy = 38;
+const hostRightIdle = 54;
+// Left of it, the least the host keeps: the spinner and a shortened `esc …rrupt` while running, a shortened path when idle.
+const hostLeftBusy = 24;
+const hostLeftIdle = 6;
+const gap = 2;
+export function footerBudget(input) {
+    const main = input.columns - (input.sidebar ? sidebarCells : 0);
+    const host = input.busy ? hostRightBusy + hostLeftBusy : hostRightIdle + hostLeftIdle;
+    return Math.max(0, main - host);
+}
+const flameWidth = 2;
+/** The footer line for `budget` cells, as segments; empty when not even the flame fits. */
+export function footerStatus(input) {
+    const { palette, budget } = input;
+    const discipline = activationDiscipline(input.name);
+    const mark = (text) => [{ text, fg: palette.primary, bold: true }];
+    const full = `🔥 LIT IGNITED · ${discipline}`;
+    const active = input.view !== undefined && input.view.active;
+    const chipFor = (room, largest) => {
+        if (!active || input.view === undefined || room < flameWidth)
+            return [];
+        const chip = chipLine(input.view, input.frame, palette, room, largest);
+        return lineWidth(chip) <= room ? chip : [];
+    };
+    if (!active) {
+        if (cellWidth(full) <= budget)
+            return mark(full);
+    }
+    else {
+        const beside = chipFor(budget - cellWidth(full) - gap, "full");
+        if (beside.length > 0)
+            return [...mark(full), { text: " ".repeat(gap), fg: palette.muted }, ...beside];
+        // The chip is worth more than the mark's words, so it stays alone when both do not fit. Alone it never
+        // grows past the middle size, so the line only gets smaller as the room does.
+        const alone = chipFor(budget, "medium");
+        if (alone.length > 0)
+            return alone;
+    }
+    const short = `🔥 ${discipline}`;
+    if (cellWidth(short) <= budget)
+        return mark(short);
+    if (budget >= flameWidth)
+        return mark("🔥");
+    return [];
+}

package/dist/v2/tui.d.ts

@@ -38,6 +38,12 @@ export type TuiContextLike = {
     } | undefined;
     readonly theme: unknown;
     readonly themeMode: "dark" | "light";
+    /** The host's API client; only `usage.limits` is read, and a host without it simply shows no plan figures. */
+    readonly client?: {
+        readonly usage?: {
+            readonly limits?: () => Promise<unknown>;
+        };
+    };
     readonly attention?: {
         readonly notify: (options: {
             readonly title?: string;

package/dist/v2/tui.js

@@ -13,15 +13,19 @@ import { micro, supportsMarkGlyphs } from "../lit-mark.js";
 import { readInstalledVersions, restartVersion } from "../restart-notice.js";
 import { buildMissionView, lastMission, leadingNotice, missionNotices } from "../tui/mission-model.js";
 import { idleMotion, motionTiming, planMotion, sampleMotion } from "../tui/mission-motion.js";
-import { latestLitMarkV2, missionStateFromV2 } from "../tui/mission-source-v2.js";
+import { latestLitMarkV2, missionStateFromV2, sessionMessagesV2 } from "../tui/mission-source-v2.js";
 import { adhdSuggestDue, createLedgerReader, createWorkReader, earlierWorkWindowMs, hasEarlierWork, messageTimes, missionProjectRoot, readCardInput, readLatestResearchRun, readMissionInput, readThreadSources, wayBackDue } from "../tui/mission-source.js";
 import { chipShimmer, idleChipMotion, planChipMotion } from "../tui/mission-skills.js";
 import { bandCard, readBandOptions, readNotifyOptions, statusCard } from "../tui/mission-band.js";
 import { activeSkillLook, turnGlow, waitingOnYou } from "../tui/mission-looks.js";
 import { rainbowActive, rainbowAllowed, rainbowAt, rainbowShows, rainbowTickMs } from "../tui/mission-rainbow.js";
 import { threadLineCount, threadsOf } from "../tui/mission-threads.js";
-import { chipLine, cellWidth, homeLine, lineWidth, missionPanel, paletteFromTheme, panelWidth } from "../tui/mission-text.js";
+import { homeLine, missionPanel, paletteFromTheme, panelWidth } from "../tui/mission-text.js";
+import { createRuntimePaths } from "../state.js";
+import { footerBudget, footerStatus, sidebarCells } from "./tui-footer.js";
+import { createNoticeTail } from "./notices.js";
 import { v2StageNotices } from "./tui-notices.js";
+import { createUsageLimits } from "./usage-limits.js";
 const refreshDelayMs = 80;
 const ledgerPollMs = 2000;
 const toastMs = 4000;
@@ -33,11 +37,12 @@ const homeLineWidth = 69;
 // A lit mark older than the moment a session is first drawn is history being loaded, not a new turn.
 const historySlackMs = 2000;
 const defaultWidth = 120;
-// What the footer row holds besides our line: the host's spinner and hint on the left, its token, cost,
-// goal and `ctrl+p commands` figures on the right (measured with a turn running, when they are widest).
-const hostFooterCells = 68;
-const sidebarCells = 42;
 const sidebarMinWidth = 120;
+// The plan windows change slowly; asking the host more than once a minute would only add requests.
+const limitsPollMs = 60_000;
+// Only the OpenCode Go allowance has a source on OpenCode 2, so the windows belong to a Go session alone.
+const goProviderID = "opencode-go";
+const noticeBurst = 3;
 async function hostRuntime() {
     const [jsxRuntime, solid, opentui] = await Promise.all([import("@opentui/solid/jsx-runtime"), import("solid-js"), import("@opentui/solid")]);
     return {
@@ -95,6 +100,27 @@ export async function setupLitOpenCodeTui(context, runtime) {
     let liveTimer;
     let bandTimer;
     let restartTimer;
+    const readUsage = context.client?.usage?.limits;
+    const limits = createUsageLimits({
+        read: readUsage === undefined ? undefined : () => readUsage.call(context.client?.usage),
+        now: Date.now,
+        intervalMs: limitsPollMs,
+        onChange: () => setRevision(revision() + 1)
+    });
+    const noticeTail = createNoticeTail(root === undefined ? "" : createRuntimePaths(root).noticesFile);
+    // The provider of the session's latest assistant message decides whether the Go allowance applies to it.
+    function goSession(sessionID) {
+        const latest = sessionMessagesV2(context.data, sessionID).filter((message) => message.type === "assistant").at(-1);
+        return latest?.model?.providerID === goProviderID;
+    }
+    // Popups the server could not raise (the automatic handoff) arrive as lines in the notices file.
+    function showServerNotices() {
+        if (disposed)
+            return;
+        for (const notice of noticeTail.poll().slice(-noticeBurst)) {
+            context.ui.toast.show({ title: notice.title, message: notice.message, variant: notice.variant, duration: notice.duration });
+        }
+    }
     const palette = () => paletteFromV2Theme(context.theme, context.themeMode);
     function span(segment) {
         return ui.jsx("span", {
@@ -264,6 +290,8 @@ export async function setupLitOpenCodeTui(context, runtime) {
             if (mark !== undefined && mark.at >= (trackedAt.get(sessionID) ?? 0) - historySlackMs)
                 ignitionToast(sessionID, mark.name);
         }
+        if (goSession(sessionID))
+            void limits.poll();
         const entry = sessions.get(sessionID);
         const { next, changed, notices } = build(sessionID, entry, now);
         if (!changed)
@@ -299,6 +327,7 @@ export async function setupLitOpenCodeTui(context, runtime) {
             return;
         for (const sessionID of tracked)
             refresh(sessionID);
+        showServerNotices();
         syncPoll();
     }
     function scheduleRefresh() {
@@ -379,6 +408,7 @@ export async function setupLitOpenCodeTui(context, runtime) {
                 contextPercent: current.card.contextPercent,
                 ...(current.card.branch === undefined ? {} : { branch: current.card.branch }),
                 inLane,
+                ...(goSession(sessionID) && limits.windows().length > 0 ? { limits: limits.windows() } : {}),
                 ...(restartTo() === undefined ? {} : { restartTo: restartTo() })
             },
             ...(last === undefined ? {} : { last })
@@ -415,19 +445,24 @@ export async function setupLitOpenCodeTui(context, runtime) {
                     const mark = latestLitMarkV2(context.data, sessionID);
                     if (mark === undefined)
                         return null;
-                    const ignition = ignitionLine(mark.name);
                     const current = snapshot(sessionID);
                     // The sidebar setting is not readable here, so a wide terminal is taken to have it open.
-                    const sidebar = parentOf(sessionID) === undefined && columns() > sidebarMinWidth ? sidebarCells : 0;
-                    const budget = columns() - sidebar - hostFooterCells - cellWidth(ignition);
-                    const drawn = current === undefined || !current.view.active ? [] : chipLine(current.view, current.frame, palette(), budget);
-                    const chip = lineWidth(drawn) > budget ? [] : drawn;
+                    const sidebar = parentOf(sessionID) === undefined && columns() > sidebarMinWidth;
+                    const footer = footerStatus({
+                        name: mark.name,
+                        view: current?.view,
+                        frame: current?.frame ?? sampleMotion(idleMotion, clock()),
+                        palette: palette(),
+                        budget: footerBudget({ columns: columns(), sidebar, busy: current?.card.busy === true })
+                    });
+                    if (footer.length === 0)
+                        return null;
                     return ui.jsx("box", {
                         flexShrink: 1,
                         minWidth: 0,
                         overflow: "hidden",
                         flexDirection: "row",
-                        children: [line([{ text: ignition, fg: palette().primary, bold: true }]), ...(chip.length === 0 ? [] : [line([{ text: "  ", fg: palette().muted }]), line(chip)])]
+                        children: line(footer)
                     });
                 };
             }

package/dist/v2/usage-limits.d.ts

@@ -0,0 +1,19 @@
+export type LimitWindow = {
+    readonly label: "5h" | "1w" | "1mo";
+    readonly percent: number;
+    readonly limited: boolean;
+};
+/** Reads the usage-limits reply (`{ data: Info | null }` or the bare Info) into the windows worth drawing. */
+export declare function limitWindows(reply: unknown): readonly LimitWindow[];
+export type UsageLimitsOptions = {
+    /** Asks the host; absent when the host has no usage source. */
+    readonly read: (() => Promise<unknown>) | undefined;
+    readonly now: () => number;
+    readonly intervalMs: number;
+    readonly onChange: () => void;
+};
+/** A throttled reader: it asks at most once per interval, and a failed or empty answer clears the figures. */
+export declare function createUsageLimits(options: UsageLimitsOptions): {
+    readonly windows: () => readonly LimitWindow[];
+    readonly poll: () => Promise<void>;
+};

package/dist/v2/usage-limits.js

@@ -0,0 +1,70 @@
+// The plan windows OpenCode 2 can tell a plugin about. Its one usage source is client.usage.limits(): the
+// OpenCode Go allowance of the Console workspace the location is signed in to, as a rolling window (five
+// hours), a weekly one and a monthly one, each with a percent used; the reply is null when nobody is signed
+// in. There are no provider response headers or rate-limit events for a plugin to read, so for any other
+// provider this module has nothing to show, and the card draws no figure rather than a made-up one.
+/** The monthly window is shown only when it is close to the cap, so the card keeps LitClaude's 5h and 1w pair. */
+const monthlyShowPercent = 90;
+function record(value) {
+    return typeof value === "object" && value !== null ? value : undefined;
+}
+function window(label, raw) {
+    const meter = record(raw);
+    const percent = meter?.percent;
+    if (typeof percent !== "number" || !Number.isFinite(percent))
+        return undefined;
+    return { label, percent: Math.round(Math.min(100, Math.max(0, percent))), limited: meter?.limited === true };
+}
+/** Reads the usage-limits reply (`{ data: Info | null }` or the bare Info) into the windows worth drawing. */
+export function limitWindows(reply) {
+    const outer = record(reply);
+    const info = outer === undefined ? undefined : "data" in outer ? record(outer.data) : outer;
+    const allowance = record(info?.go);
+    if (allowance === undefined)
+        return [];
+    const rolling = window("5h", allowance.rolling);
+    const weekly = window("1w", allowance.weekly);
+    const monthly = window("1mo", allowance.monthly);
+    return [
+        ...(rolling === undefined ? [] : [rolling]),
+        ...(weekly === undefined ? [] : [weekly]),
+        ...(monthly !== undefined && (monthly.limited || monthly.percent >= monthlyShowPercent) ? [monthly] : [])
+    ];
+}
+/** A throttled reader: it asks at most once per interval, and a failed or empty answer clears the figures. */
+export function createUsageLimits(options) {
+    let current = [];
+    let askedAt;
+    let pending;
+    async function ask(read) {
+        let next;
+        try {
+            next = limitWindows(await read());
+        }
+        catch { // no-excuse-ok: catch -- an unreachable or signed-out host means there is nothing to show, never an error on screen.
+            next = [];
+        }
+        if (JSON.stringify(next) === JSON.stringify(current))
+            return;
+        current = next;
+        options.onChange();
+    }
+    return {
+        windows: () => current,
+        poll() {
+            const read = options.read;
+            if (read === undefined)
+                return Promise.resolve();
+            if (pending !== undefined)
+                return pending;
+            const now = options.now();
+            if (askedAt !== undefined && now - askedAt < options.intervalMs)
+                return Promise.resolve();
+            askedAt = now;
+            pending = ask(read).finally(() => {
+                pending = undefined;
+            });
+            return pending;
+        }
+    };
+}

package/docs/assets/readme/badge-version.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="146" height="20" role="img" aria-label="release: 1.0.37"><title>release: 1.0.37</title><g shape-rendering="crispEdges"><rect width="49" height="20" fill="#080d14"/><rect x="49" width="97" height="20" fill="#ff6337"/></g><g fill="#fff" text-anchor="middle" font-family="Verdana,Geneva,DejaVu Sans,sans-serif" text-rendering="geometricPrecision" font-size="110"><text x="255" y="140" textLength="390" transform="scale(.1)">release</text><text x="965" y="140" textLength="870" transform="scale(.1)" fill="#080D14">1.0.37</text></g></svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="146" height="20" role="img" aria-label="release: 1.0.38"><title>release: 1.0.38</title><g shape-rendering="crispEdges"><rect width="49" height="20" fill="#080d14"/><rect x="49" width="97" height="20" fill="#ff6337"/></g><g fill="#fff" text-anchor="middle" font-family="Verdana,Geneva,DejaVu Sans,sans-serif" text-rendering="geometricPrecision" font-size="110"><text x="255" y="140" textLength="390" transform="scale(.1)">release</text><text x="965" y="140" textLength="870" transform="scale(.1)" fill="#080D14">1.0.38</text></g></svg>

package/docs/reference-Ko-KR.md

@@ -384,14 +384,25 @@ Code Mode 밖, 모델의 도구 목록에 바로 있으므로 `lit-plan`도 계
   더해 OpenCode 2에만 있는 세 가지를 띄웁니다. 작업 단계가 넘어갈 때(`🔥 Stage`, `work 3/7`), 규율이 바뀔 때
   (`🔥 lit-loop → start-work`), 레인이 시작되거나 끝날 때입니다. 한꺼번에 일어난 일은 `+N more`가 붙은 토스트
   하나로 합칩니다. 재시작 안내, `lit adhd` 제안, 켜 두면 나오는 완료 알림은 OpenCode 1과 같습니다. 서버만 알던
-  자동 인수인계 알림과 스킬 힌트는 그곳에 나오지 않습니다.
+  자동 인수인계 알림은 `.litopencode/notices.jsonl`을 거쳐 화면에 나옵니다. OpenCode 2 서버 플러그인은 이벤트를
+  구독할 수만 있고 토스트를 띄울 수 없으므로, 서버가 알림을 그 파일에 한 줄씩 덧붙이면 TUI 플러그인이 시작한 뒤에
+  생긴 줄을 토스트로 보여 줍니다(파일 크기에 상한이 있고 심볼릭 링크는 따라가지 않습니다). 서버가 띄우던 나머지
+  하나인 점화 토스트는 이미 TUI가 직접 띄우므로, 따로 옮길 스킬 힌트는 남아 있지 않습니다.
 - *TUI.* HUD는 OpenCode 2가 공개한 슬롯에 놓입니다. 상태 카드는 `app` 슬롯에서 세션과 사이드바 아래에 그려지고,
   쉬든 일하든 네 줄을 유지합니다. 단계 칩은 에이전트·모델 줄 오른쪽에 슬롯이 없어서 점화 줄과 함께
   `prompt.footer.status`에 있고, 홈 줄은 `home.footer`, 미션 패널은 `sidebar.content`에 있으므로 사이드바를 열어
   두면 보입니다. 카드, 칩, 패널, 홈 줄은 OpenCode 1과 같은 글자 빌더를 씁니다. 플러그인 항목의 `band`, `notify`
-  옵션은 OpenCode 2가 넘겨 주는 옵션에서 읽습니다. OpenCode 2는 할 일 목록을 두지 않으므로 미션 진행은 ledger와
+  옵션은 OpenCode 2가 넘겨 주는 옵션에서 읽습니다. 푸터 줄은 호스트가 잘라 버리게 두지 않고 터미널 너비에 맞춰
+  단계적으로 줄어듭니다. 표시와 전체 칩, 표시와 작은 칩, 칩만, `🔥 1/3`, 불꽃만, 아무것도 없음 순서입니다. 쓸 수 있는
+  너비는 전체 너비에서 사이드바(120칸을 넘으면 열려 있다고 가정)와 호스트 자신의 스피너·수치를 뺀 값입니다.
+  OpenCode 2는 할 일 목록을 두지 않으므로 미션 진행은 ledger와
   작업 기록과 계획에서 읽습니다. 도구 이름도 다릅니다(`shell`, `subagent`, `id`를 받는 `skill` 도구). 카드는 그
-  이름을 읽습니다. OpenCode 2는 플러그인에 요금제 한도 수치를 주지 않으므로 그리지 않습니다.
+  이름을 읽습니다. OpenCode 2가 플러그인에 주는 사용량 출처는 `client.usage.limits()` 하나입니다. 위치가 로그인한
+  OpenCode Console 작업 공간의 OpenCode Go 허용량(5시간 롤링, 주간, 월간 창)입니다. 마지막 답변이 `opencode-go`
+  제공자에서 온 세션이면 카드 아래 테두리에 컨텍스트 수치 뒤로 `5h 42% · 1w 18%`가 나옵니다(월간 창은 90% 이상일
+  때만, 호스트가 요청을 거부 중이라고 알리는 창은 `limited`로 표시). 호출은 1분에 한 번 이하입니다. 다른 제공자,
+  로그아웃 상태(응답이 `null`), 오류일 때는 아무것도 그리지 않습니다. OpenCode 2는 제공자 속도 제한 헤더나 이벤트를
+  플러그인에 노출하지 않으므로 Anthropic·OpenAI 요금제의 5시간·주간 수치는 없습니다.
 - *업데이트.* OpenCode 2에서는 플러그인 안의 자동 업데이트가 없습니다. `opencode plugin update`를 실행하거나
   OpenCode 2의 업데이트 방식에 맡기면 됩니다.
 

package/docs/reference.md

@@ -503,17 +503,29 @@ settings but does not send them yet.
   only OpenCode 2 has: the workflow stage moving (`🔥 Stage`, `work 3/7`), a switch of discipline
   (`🔥 lit-loop → start-work`) and a lane starting or finishing. A burst folds into one toast with a
   `+N more` tail. The restart notice, the `lit adhd` suggestion and the opt-in finish alert work as on
-  OpenCode 1. The automatic-handoff notices and the skill hint, which only the server knew about, are
-  not shown there.
+  OpenCode 1. The automatic-handoff notices, which only the server knew about, reach the screen through
+  `.litopencode/notices.jsonl`: the OpenCode 2 server plugin can only subscribe to events and has no way to
+  raise a toast, so it appends each notice there and the TUI plugin shows the lines that appear after it
+  started (the file is capped and never follows a symbolic link). The one popup the server raised besides
+  those, the ignition toast, is already the TUI's own, so there is no separate skill hint left to port.
 - *TUI.* The HUD is placed in the slots OpenCode 2 publishes: the status card is claimed in `app`, under
   the session and the sidebar, and keeps its four rows idle or working; the stage chip shares
   `prompt.footer.status` with the ignition line, because there is no slot right of the agent and model
   row; the home line is in `home.footer`; the mission panel sits in `sidebar.content`, so it shows when
   the sidebar is open. The card, chip, panel and home line use the same text builders as OpenCode 1. The
-  `band` and `notify` options of the plugin entry are read from the options OpenCode 2 hands over. OpenCode 2
+  `band` and `notify` options of the plugin entry are read from the options OpenCode 2 hands over. The footer
+  line steps down with the terminal width instead of being clipped by the host: mark plus the whole chip,
+  mark plus a smaller chip, the chip alone, the chip as `🔥 1/3`, the bare flame, then nothing; the room is the
+  width less the sidebar (assumed open above 120 columns) and the host's own spinner and figures. OpenCode 2
   keeps no todo list, so mission progress comes from the ledger, the work record and the plan. It names
   its tools differently (`shell`, `subagent`, a `skill` tool that takes `id`), and the card reads those
-  names. OpenCode 2 gives plugins no rate-limit figures, so none are drawn.
+  names. OpenCode 2 gives plugins one usage source, `client.usage.limits()`: the OpenCode Go allowance of the
+  Console workspace the location is signed in to (a rolling five-hour window, a weekly one and a monthly
+  one). For a session whose latest answer came from the `opencode-go` provider the card's bottom border shows
+  `5h 42% · 1w 18%` after the context figure (the monthly window only from 90%, and a window the host reports
+  as refusing requests reads `limited`). It asks at most once a minute. For any other provider, a signed-out
+  host (the reply is `null`) or an error, nothing is drawn; OpenCode 2 exposes no provider rate-limit headers or
+  events to a plugin, so there is no 5-hour or weekly figure for the Anthropic or OpenAI plans.
 - *Updates.* There is no automatic self-update inside the plugin on OpenCode 2. Run
   `opencode plugin update`, or let OpenCode 2's own update policy handle it.
 

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@litfamily/litopencode",
-  "version": "1.0.37",
+  "version": "1.0.38",
   "description": "Workflow plugin for OpenCode: add lit to a prompt and the work is planned, built, checked and written down so the next session can pick it up.",
   "keywords": [
     "opencode",
@@ -70,7 +70,7 @@
   },
   "dependencies": {
     "yaml": "^2.9.0",
-    "zod": "4.1.8"
+    "zod": "4.6.6"
   },
   "devDependencies": {
     "@opencode-ai/plugin": "^1.17.6",
@@ -79,6 +79,10 @@
     "picomatch": "^4.0.5",
     "typescript": "^5.9.3"
   },
+  "overrides": {
+    "zod": "$zod",
+    "toml": "5.0.1"
+  },
   "publishConfig": {
     "access": "public"
   }

package/skills/lit-typographic-motion/requirements-audio.txt

@@ -391,95 +391,98 @@ llvmlite==0.49.0 \
     --hash=sha256:ee81e96c15a6f870918f1eb60c913551c16aa23defb4f5f1acfa660d6a0aaac2 \
     --hash=sha256:f3f2ff0aeb17d34fcce9f79b99baac441cfd3efa41b83e233ca4530a72381f72
     # via numba
-msgpack==1.2.2 \
-    --hash=sha256:06d95f61de7afe4f4ff908a6feebfcb070d0582ac87c9cf3cedf8551cf634516 \
-    --hash=sha256:0708afbf6a9587f0bfe479a9825c141d14d91e2f6a5c8103cf28bc96f4edb5d9 \
-    --hash=sha256:0883a1578168929fd1640fbbc4614773f1a130e419a8a817dc2918d9af1b651c \
-    --hash=sha256:0a652ceeededf71d3fa40c303a02a149d42338d310162367b91c539d4bd6e0a3 \
-    --hash=sha256:0dd9173c5ebaf5ecc5ca86e7ae1db92934e1d57b856f3dd90698941431f4fd77 \
-    --hash=sha256:0e3315de5a4b2920ccef48d96b4448025e064a10d0f5a250f6584477d839c8d4 \
-    --hash=sha256:0e91332144f69bc3018c91232fac26da580ef748fb8eaddd7914d4458001cc4f \
-    --hash=sha256:0fbc1bed8a535389b41882cfae66376e248cd1680eaa94fd83193c73e1d24986 \
-    --hash=sha256:11e8c421e117d1c36728b423d0402555cccbf0c6f53e288f0e75b6b12100d70f \
-    --hash=sha256:1510f24612d4b983dff6935d9273e02c320cfd525727fbcb58836a75f589fdbc \
-    --hash=sha256:1814f92306ae7862908e9ece7cfd90e0dc87ded3e89b6ae7ffdd1175d6376fdc \
-    --hash=sha256:1e8cdd1f3e7cc52c751092a9bf740e81e6919ab109cd376ae2d965dad0bbae34 \
-    --hash=sha256:1f3af0baafd184436501004828bb3df64eeb2fc49dfe9d89abcf604956094563 \
-    --hash=sha256:1f6b6f8deb07d49090e1808c6ef9cb7d23ca17bef3aa6ed3e5e03df16606e60c \
-    --hash=sha256:226a62ffe99fe54c5c61d910ec64c3449b7766c3280bd286bf6c94838dde239a \
-    --hash=sha256:29cc2d5291711a52956a79a51f41c732329df39ad727c886bd8f0b5b9237a808 \
-    --hash=sha256:336525cc2688e43ea77dfb1a4ce012c8cde561835913801dbfcfdcf4111d8abb \
-    --hash=sha256:34e83e345194a2a51d8bd447dea9de2104f91e75b247f4735f14f04529f0746b \
-    --hash=sha256:352ed831042549cca8be23780e1fe7c9177e65ff02bf183509c4b4d33f671782 \
-    --hash=sha256:3e915d390d7068b257ca8b62f3fc59fad135c8631d1017ab03b0b924b07c5367 \
-    --hash=sha256:419a45c67a5c04213172a14b1864657e014665b77d7081b107a51707923dd39e \
-    --hash=sha256:42fd9260416885b4815caca5bdd14dfd5dda6cdade732d6c09104ef8f6228761 \
-    --hash=sha256:46ec851571d8f1b6e29794ebb9dd36f785008da6d14f57c702e60781d6caf648 \
-    --hash=sha256:4710d881d8fb047deed2485707409116722af2b992d3fefd73c7667c4e350839 \
-    --hash=sha256:4955accbd87f27beebef5f3ecc27503aa74cb016fb4f640868e749fd93194a35 \
-    --hash=sha256:4a4348705be86e029d04e741cf9ed0dfe03e942d7d3b92e838fa80d3aa2c3ebc \
-    --hash=sha256:4b554d8164ebb526892194f71dcd96ef1fefe0c250087498785d3ffc04a80be3 \
-    --hash=sha256:4d9a562aec0a92fe536da2e533d313b3d2a6b929157b1dec7ff623446dc0a8ab \
-    --hash=sha256:51dd39d23cfdea0400ed3ff2d29d1e83bd951d3aea79dc89be5b701a09edfe23 \
-    --hash=sha256:53679573c75cce5f82359e0bd4e6a97809a6b9a9b7a48fd1ba592f4a82cddc84 \
-    --hash=sha256:55faa6f8395e23b848c535ad5dcb96b3462f37f5e7f4ac500d500434f7345da7 \
-    --hash=sha256:58ce37a4a54577115922385d37201d9a44d66d0167dfbbf4770a2e9bf8ea7ba3 \
-    --hash=sha256:59d5b93efa45fd09f620d0c9ba81cde339a2c9937af3eea42ee9653094ce6640 \
-    --hash=sha256:6195257a107bf25872ef84aab7295078271eea3ac6413f0506b631f6c9586ed5 \
-    --hash=sha256:652d1bf13d01bac8fd569def0fe76745e55bcda01e30aa6332d5947ea3788839 \
-    --hash=sha256:682804bf31e43d46e51a9a33bd575b51e839d715ce6bd5612c055f7b28ad637b \
-    --hash=sha256:68df2947921d449f6dcfeafd86cb2cdde13327a8b447534bbe4ee5aaf32a5695 \
-    --hash=sha256:6f53285f20d592ed309ee19e509cc4c77a3bda1db02ad67e8a0949bb227a5a6d \
-    --hash=sha256:73b0e05c32c3cfc3cd84994908e57430c0ebc6813abf905d3f18ff115d54df3f \
-    --hash=sha256:77c2e018417dc1d66f235e383877ee885b60ade9d29e494dd581e08af2cb1923 \
-    --hash=sha256:7826f16edc763e768404f55605ef85dfcf5857e729c1ed29e0d7c180be4fe6d8 \
-    --hash=sha256:7afa5431f6f3487c584187ca6c8e2a34e9b106529893b3e720eabb068f6ac970 \
-    --hash=sha256:7d095df2627e5dd59ac7b0c5ad627a671c76e6020171e03cbe4621a61f0562c3 \
-    --hash=sha256:7fe374ba76eb0ecca13a1703daa8fa85825a6ddddbb52d4c1a732fa524194683 \
-    --hash=sha256:82b1bdf293267afaadcc608b125e7fc6576bb0785a60c4fa7d07c7ab76ed76ec \
-    --hash=sha256:86f173a584f72f6164801f31866d22a581f60c991572cf922aed9ab8eb422b77 \
-    --hash=sha256:8b1415d02e9bf722672af8a90f90813265a0cd0b14163187261e54a5592bc949 \
-    --hash=sha256:8b2a281b556f120a43e591ea39915741b7ad54d4727b9c4350a0a11692252533 \
-    --hash=sha256:8c6321a414f8b4a8dc43976b2fa8349156434ca9adedd9a187b796f7e1d3d3fc \
-    --hash=sha256:8dc4487097571f7311188c3eca2a3e86cd1f1db4c37c7a017bcc3fd38486cbfe \
-    --hash=sha256:90986cc9aab9d7d1d8f38bcbf65d3f7ac83bdd90c35765db7d691b4829698cba \
-    --hash=sha256:9352e6cdb510a7b1a5d3ccaccec730e82e50cf3484a3af7bdaab19e23b9589ff \
-    --hash=sha256:935b1cfad9b908b0fa845010f4271df4c2f04e1cd26e3f18acd61a45f93c9e36 \
-    --hash=sha256:9b659d77f8726fa5e7038967dda6b68d53cf34472c094cfa5b845454713b90d5 \
-    --hash=sha256:9bd3d1557c3fe1a095068210708a03e3e4795973392af6f4047060e70abd9a6c \
-    --hash=sha256:9bf452ff4d4981f25a18e9476e002bcc9263e7928024aa4d7148e25f7be3f929 \
-    --hash=sha256:9d7fb25b4442fae0cb2590272d06ab4f6caa526ee36a994edb81e946b874813e \
-    --hash=sha256:9db1ba1c1e6a84245a9dd866265b56b8a1e9461549cc72ed296d8cbfbd32961b \
-    --hash=sha256:9eb0b0e602064527a045ea28c4f174ed69383587e29cebe28947e3b84106eb2a \
-    --hash=sha256:9fd7f32e2f0fb334e7ecc5adb5cf0458785bd3a9d9d86f950e1715f101cebce5 \
-    --hash=sha256:a378e12ccc06d76efde115caf4073b7e5ff3cc18291d1341f9e65fb882e3f754 \
-    --hash=sha256:a4161eee7799863aee237c35c90427861f7b994416dd81ae829f560b0a81bdcd \
-    --hash=sha256:a9b4cf3685a135666d27d0d7a73fece74e2fad01d9b508fded89e843512f0e90 \
-    --hash=sha256:aa1120c653b76d8eafa50423b5eba06b5c9737f8692c74fa3afe03e84b8978ea \
-    --hash=sha256:b07c03f0da7e5279170df7745ddc732d526c8a198208936ec1a95c11ed2b2d5f \
-    --hash=sha256:b13b59e66f107cca1ba708dd5307179870ca1b15b19fcee7ccf722e5308d9212 \
-    --hash=sha256:b542ffc0a5c531eedc40419f291f1bd659aa8d4223408a5b51c88a2796083fd3 \
-    --hash=sha256:b5c696ae7cd7166b3657261adb855b461ff31f07823fdbae9de8bf80adfccc21 \
-    --hash=sha256:b68614fba0570349833b7dd999ff0aed4e5cc8d9eb6e3a7d4527be33c65e33d3 \
-    --hash=sha256:b8dd6c71d20c28d2d0eb0c51e7cccf3584afde3b1364f6629596186c9025bd54 \
-    --hash=sha256:b9b0c1f2aa7b0026b4bd50718100e8b04175e4f36e160aa852502377b5e572e7 \
-    --hash=sha256:c522420d78db2431887d45b518e304d86e27b9ad0b30f24e3806a6ad5d8bdbfc \
-    --hash=sha256:ccfd880988f8438d1c91c77d7edc58e70f4d2012e999167bc154c64c6f06ea6b \
-    --hash=sha256:cdb6cc6e1127d15879c47a8b3270716243da82d3e7feab1f5946872c75b3d60f \
-    --hash=sha256:cf66fb38703e61a486b01b56d43bb1f50698fbe99b6bd90feba10f24fab60b3b \
-    --hash=sha256:d13d07efbf655f9ae7a2352b630c52727b359005b21ba08a507585c9ac8c0896 \
-    --hash=sha256:d242f3c4ccf55b056e6cf901720dccde58f1df117898f2bbf3bcd6e38ec7c248 \
-    --hash=sha256:d24b38a825bcca41bb956de50eb98451ef291304a8607fad99e619043d3e79b9 \
-    --hash=sha256:d3c247d457ae9079974c7ce3c665396754a6d2baff7eaa51332212a8a5a3f13b \
-    --hash=sha256:d886baa46b2532135e7320067e6a44edb09ba5883a6096b0f9c044533984b8a8 \
-    --hash=sha256:e05a94a0442de86818a30281c6cc2cb9cc7aa148386fd3541c4d4774b73cb3a9 \
-    --hash=sha256:e1b99ad34613d5f8477fa5cf99bc4eaeaf27965588007c102370cd9a78fe9de5 \
-    --hash=sha256:e2eb7ea0ac3911a7aac9d8aaa36d40f216d99455b3274cd3fac38181bcd910cf \
-    --hash=sha256:e497ee34e8a3342bbde51b27c22d8db05a651df3361dd3daef5b3ab0d66f3e04 \
-    --hash=sha256:f11e09f10210a91c169e39c7a5a1f9090eaa73ad75555fafad5023c3053c47ba \
-    --hash=sha256:f466049b8e1ec0854287bbe9a074316826fe0e08dcf707245f98b1ae49e92650 \
-    --hash=sha256:f80361592c13d7226b4379c8941529b63fe1a9d0e05d2de8f3306b70e522b53f \
-    --hash=sha256:ffdd2f4950daf7815490f23087963e3420175b9609520b7ff5df64d351159c22
+msgpack==1.2.3 \
+    --hash=sha256:07c9733089d1b176c3dd2f7fa268452f9d5d784d076473499d754a58e8d1fbbb \
+    --hash=sha256:0955b9000725573d1457c1676944b370dd9643c8d18f25bda5ac72913f850949 \
+    --hash=sha256:0c91762c48cd686dc9cf2b142c0bc544083952de32f5853d6624c956e54b85e5 \
+    --hash=sha256:0ed5823c4efc20fe87d3530665f40ec18a002be003114814c21235cc8d256207 \
+    --hash=sha256:13221a6c81ebb8e43ea63a7251c35d54e4175cea37ebf3a62e911bdf42562a3c \
+    --hash=sha256:186e6c602b8a9968b8e864c67d622a69279f7d1e55ae25f40e3bff7e815b2b62 \
+    --hash=sha256:18a6ed513023001b28dcd3ba54966f6bb90a38274ba8d2640464bcab3a1b81d4 \
+    --hash=sha256:1d6bcec3dbbdb89ca385d3a73e63ceae7b841fa0d7ca7c676f1a7bfe7fb2cdb8 \
+    --hash=sha256:1f4ae8bd4ad9ba085fde95e95d055a896d19210238a4199a771a3cf36dceed49 \
+    --hash=sha256:1f585407f740a9eac04a3bb82c61d68a0ea78f90e29e670bfb086b9ce3a518dd \
+    --hash=sha256:21bfa4d2aa0b04c1806ef778a1199e9e53ea2441bcbf284420a32083896320b8 \
+    --hash=sha256:2487453ca1b6104442c6442f9a1a8fee1fe8f428a70d99d4cba799108b304150 \
+    --hash=sha256:2574ef81c1c8c38b10e330f3f9406fd09198a776b002030fafcf8e7647e9e06e \
+    --hash=sha256:30e1522e4173230dca4d9ad896f038f73c0da6c1edd42f4dbad88ac583cf5d46 \
+    --hash=sha256:32edb81a2b5eb7cd7c9d941b2bfbbb082fd2cd09e0e725930316af6b708db186 \
+    --hash=sha256:3372475211a9ce1a23acefe512cb3e121d18c95dc74ed56cb1819ef40836ebf4 \
+    --hash=sha256:382b219de3d436de3baba0f4b0c6d4336e8f5858d0eb047918b13b69a71c6c55 \
+    --hash=sha256:382bc88fe90f29f5ac8a0b65c7046ff255356f2f2f3186c30e370215736fa1dc \
+    --hash=sha256:39b6986c19e1f2dfa549d185dba6ccf1de2e4c0ba10d8cfc0048935b1c5f9109 \
+    --hash=sha256:3a31905206722103a84c1f72633fe30692cff6732c9d262e09a27dbc468797c8 \
+    --hash=sha256:3d4c807ed050fe3ddbea5ba7e9f63d7136871ce42861be1f50ff739f0e91047a \
+    --hash=sha256:3ec409b0d6aa8e9eec6eaf881b893caa215dbe68c5319ca96e8a271d81bb111d \
+    --hash=sha256:471e12a6a42498a31490c206e0069e343b6a7c35db540be73a879eb06f5be047 \
+    --hash=sha256:4c0780095871ecc49a58b2ff6b1b43b25214704da67646557ca287a3f49fb2dd \
+    --hash=sha256:59612b4ed48a04cf024584218e813562f3b30a3bafa5f55abe300b15da314751 \
+    --hash=sha256:5bd5f91ea75c45cafcc5433ba8fae59b708b736ec178d2441c40c499e9e079db \
+    --hash=sha256:5bf390259cb25a6a1cd197c65810999b811f64cd38683251538bcc5a1e41f7d3 \
+    --hash=sha256:5c1efdd9181cb1b719ee46865f368a927f1c0c65d577798340b1194545b7515a \
+    --hash=sha256:5e0d7950ca3c1bbae291d0552dd3bb2792fc680629c4c0d44e47e5bab969f3ca \
+    --hash=sha256:5f304123b90e8b2e49867981b7f6061612c39f50cca51ee88de007c084cf68d3 \
+    --hash=sha256:62cc1a4ef0e553bac32c8342e1f04834aca7de276b92744eb7307db77759b890 \
+    --hash=sha256:63bb7448a1e9111319ae2430c09a5596140c160422830d6271bc75730ff2ff9a \
+    --hash=sha256:6576f348ed6cc4f31db6fd915a8e94245f042f50eae08d48732425e70638ea37 \
+    --hash=sha256:666ef5601ab0e6e345e47febc96aa81143cc932201543480cbb9499164f05ffb \
+    --hash=sha256:6707d2fa2aa1bb5424ea0b05f44ffc989b15ab41a73ff5855bff4944fec7c8ac \
+    --hash=sha256:69ad12cedb674c73527bed869cddb42b742cac79a207a614202a4abaa24ea173 \
+    --hash=sha256:6a834097144aabe948b8ca9020a833e8026f7d0abbd0ec54bc7e50f45a8ce012 \
+    --hash=sha256:6df430419f2338cb71e4a34d6e64f83c88ccd321f91f40ba4513400b36d864ec \
+    --hash=sha256:700bc0fc9e968a292b9137ee70e7a012f7e115bf0107ce45e3a88202788dfc1e \
+    --hash=sha256:7013534a7163aa4f213c4d9864f1a8a7555daac6fcd48f699a198e29b436bfab \
+    --hash=sha256:7995a7c6a62a1d6e7df211b4a16de513bd99fd053525050a319f80f44fb8015e \
+    --hash=sha256:79dfa38faf92f804aa61beec140d70b18418e1dde1778dbb77a87a4cce85aa8a \
+    --hash=sha256:7a003b02c6ee2eea6dfe0bb08818631e3597e69f0131f2a8250488a1cc553290 \
+    --hash=sha256:7c047250096f9fc19dba26e3d1639b5e7a84114003605c94def667149a70ced1 \
+    --hash=sha256:84a6616d396ec1bc18a1e83e67c96a393ec35dfe5e17434a5be7b9aa0fe988ab \
+    --hash=sha256:87cf2ef05ff2f2493ba29fcdaef27e960ca64dacfd13460ae29e6f92e0ed05bb \
+    --hash=sha256:89c930aece4e972b208ba589c8410b4167b05e411a5ea2cb25fd96f8bc47ee43 \
+    --hash=sha256:8ca67f77938ea6a3663aa9bd22b3e031f6da84d665be850abab910ee90728dfd \
+    --hash=sha256:8e51eca14fbb65c4e0a5a9657346962bd3dca78c08e04e3d4dee70ef48687d30 \
+    --hash=sha256:8ec7a1d49ca6c2569d722ab5ec86e90089b0713900aa31905b47b4c4d9e78ce0 \
+    --hash=sha256:902f3490db0e07a7d40b48536a85c9b28fbf1397e7e1658a45a55f958e303620 \
+    --hash=sha256:905a189853d6bdb204c7ae5f4ab77fb857448abfff574d3d93c62e2815b24b4f \
+    --hash=sha256:9276ba88891338f2617044429dfd080ae008c9868a25f6f1a7d004a35dc9ac0a \
+    --hash=sha256:9324c54995641c3d1f92a9d55093c8cde0ffa2fbc87a467a688ef60428393220 \
+    --hash=sha256:968583e956d0427878050b371308c5f8647088732ef3e66a117dbe1192ec91e0 \
+    --hash=sha256:9d7e9cbb0998bbfd363fd9a09c330520d5e9cb323c05b5a1a05865d23ccf2226 \
+    --hash=sha256:a393e428f6ffb0dcb73308c1fff5593041c16ff42da66e5bac8a83a6107a54b0 \
+    --hash=sha256:a6b63917d60d6df451f328bd6afba8565e33c4afe1f62ec4ad758b78731c827b \
+    --hash=sha256:b1631e12fe572e181cd77e831f69335d6cd5278eac22e3db3f33cf264ac2ac18 \
+    --hash=sha256:b774ff994d844e541439ac5d2d49a14def4104830c3465e9394c153f86200ffb \
+    --hash=sha256:b949cc25e4a09252cbcc54e66e507de914d0e94a3a7039bd54c299bf7037c098 \
+    --hash=sha256:bb89b5dc30469c84bbf8684826eb851d82412ca95690e111b9ac5e8fb343961a \
+    --hash=sha256:bfe7d5b62cbe7aa664f0b3e2c49077f10fcdd06183d3014f8271ff3c5edbfbf9 \
+    --hash=sha256:c309a7abae1d14ba29a8bd0ddbd704a5e469d8e9bd9c3dee0e4ff53d7ae01d56 \
+    --hash=sha256:c77e27790ad72989db783d5303825fba0b71550f00a490efba35cde7dc4b719f \
+    --hash=sha256:c942c21a93f36b3a69e828c8945bb72c94dc2ffe488a2086950c812f3edf046c \
+    --hash=sha256:ccea05b5542f6d283fef3f0a8e93a7f0be90af0ddeeef84c25c0216ba76dcae1 \
+    --hash=sha256:cd5a9f9f86a52c24713679aa2631956835f3842512964ff93f736ff76f1f530d \
+    --hash=sha256:d0238cd05dec9ffbe0de1071df685ba63e30a36ac155285b1a094e727c38cbe9 \
+    --hash=sha256:d1c1e8989a855b7f1f2a64ec4a80b23a631822903952770813857b2e4f460471 \
+    --hash=sha256:d2f9c4f85e47a44d26d5baf3b041eef23436e224d44eed273f01bd8a12048d9f \
+    --hash=sha256:d31864ba3933a589b6a00249f89c0eb422197f49128fc10da550e57e9cb0f377 \
+    --hash=sha256:d8ef3a66e4b52d2d7fdd90df2984670124b2ff7546d76bb25dcf68ef47f7df58 \
+    --hash=sha256:db84203b13aecc222f465061397fdd5b53b7ae73d2c95ffc1c8dc5be0153a709 \
+    --hash=sha256:db9fb67a3a2e75247bae569d34ebb5ff61c0448a4f0d6dbf991dae68af39b007 \
+    --hash=sha256:e0bd394e999949c814f7912284243298de1b5a17b6a3dcb6cc8a79b156ffc4fa \
+    --hash=sha256:e15f70588f4db8cd10df0930145b186de70feb9db51710cd378b1399009655bd \
+    --hash=sha256:e54394b7dbe2e12ab032d9d21feef7bb61a90a150a2623633ba3781ba69dcb1f \
+    --hash=sha256:eaf7e82249837e3aa97297b34a0bb9ff562027381631e057cea6e1367f10b438 \
+    --hash=sha256:ec0030361cc861ac699b2ef1c695b741fa145c88f8667fa3d7e3f73deeb648a3 \
+    --hash=sha256:ec90a9ae3e1169fa1171147340f0e97d941aa19fcd3b34e8339a55933ed042af \
+    --hash=sha256:ed899d73a22f286a72bd9528d63f2ab3030dbad8bf1527fc249319a50d61fb9d \
+    --hash=sha256:ede33b2892ceb976283e009ad12fa1834cfdf1f9c43ee9c97849fc588d00a618 \
+    --hash=sha256:f24a43b3560e20f825b807fe1e874bd73d53abaf8bbdcf258a6eb152cddbc1f5 \
+    --hash=sha256:f3d7b3d0018746b5997dd6b14a1870b07cc4c327d9101145d94a1fc264a51a06 \
+    --hash=sha256:f41ca154b7737b11893cdce3c78c61d703398a1cd54d4297bdad908392338a8e \
+    --hash=sha256:f42f146752eedb6765f07dcc04d72dab0a25779ec8d4a88c0085263ce114f22c \
+    --hash=sha256:f56fba61b2516be7917cb00151f0d060b5b21184e3499bb57f0f7d9259bea124 \
+    --hash=sha256:f9ddd28d3e9bbc602a9dced1591882c7fb9ab776eef8837da2c326fde19e2853 \
+    --hash=sha256:fafc3b8898b432b841d30a61082c599fa7f4d06885f9dc58ad72259e12059fa6 \
+    --hash=sha256:fcc6800daac4922960f6eeb7a0dda3dd4105e0bf7bce0e83ebc465a78cb7bdba
     # via librosa
 narwhals==2.26.0 \
     --hash=sha256:29326d74f107c347fd1009bd58e38d9f7c7c5b51e6de97bc93dbc325d9038b54 \

package/skills/managed-skill-manifest.json

@@ -3270,7 +3270,7 @@
         },
         {
           "path": "templates/hyperframes/package-lock.json",
-          "sha256": "9c8fb05ae772defbd885e032a3ee04caf28bea3869e115a748c23e9808288a3c"
+          "sha256": "115478d6f9ea0194666aa076559cd063955ba0d3fdc75782c2c8204e2a1c6599"
         },
         {
           "path": "templates/hyperframes/package.json",
@@ -3282,11 +3282,11 @@
         },
         {
           "path": "templates/remotion/package-lock.json",
-          "sha256": "8fb3fa7aba1a99516ca19f225b61bb7e881987ddfcbb6e206e6093692b0d6d21"
+          "sha256": "10beadf1d53049adcb83c75e8af35bb50d83907bb96d70b1deb1faad5fe8e6e6"
         },
         {
           "path": "templates/remotion/package.json",
-          "sha256": "d152b6fcf21fa733e0a136f1607bddb4a10801ee59330a4e4c164da62ba7a03f"
+          "sha256": "84b1bd1a2624889e44dad6df00a79ac6d6ea51a3bda99050f7cebae8b588f5b9"
         },
         {
           "path": "templates/remotion/src/index.tsx",
@@ -3789,7 +3789,7 @@
         },
         {
           "path": "requirements-audio.txt",
-          "sha256": "771ab581292545d597b5a5e0f47efa399ecc5f1c5e710dd042a55e72702a7775"
+          "sha256": "55bc85467f4e416db2d6069d23e94f8ad7f3b515432a166797c4a682e4451503"
         },
         {
           "path": "runtime.mjs",

package/skills/readme-studio/templates/hyperframes/package-lock.json

@@ -463,16 +463,16 @@
       }
     },
     "node_modules/@hono/node-server": {
-      "version": "2.1.1",
-      "resolved": "https://registry.npmjs.org/@hono/node-server/-/node-server-2.1.1.tgz",
-      "integrity": "sha512-ELuehkj5VCBdgEw9zs+ivkKwyzzUCSQuE96YmiPvn1ECBoZCczbFXJLeEGMTYjphP6gydh4pHMqEYPVMYUVgQg==",
+      "version": "2.1.5",
+      "resolved": "https://registry.npmjs.org/@hono/node-server/-/node-server-2.1.5.tgz",
+      "integrity": "sha512-MgP/I06GdvsilDspMk/qmRzpk8LOUStP6jFAbSRi40W09DhoyUn+Mj7eyKICPqeYKybOjVFLVIAQzvu1bfIa7Q==",
       "dev": true,
       "license": "MIT",
       "engines": {
         "node": ">=20"
       },
       "peerDependencies": {
-        "hono": "^4"
+        "hono": "^4 || ^5.0.0-0"
       }
     },
     "node_modules/@img/colour": {

package/skills/readme-studio/templates/remotion/package-lock.json

@@ -3771,9 +3771,9 @@
       "license": "ISC"
     },
     "node_modules/zod": {
-      "version": "4.5.4",
-      "resolved": "https://registry.npmjs.org/zod/-/zod-4.5.4.tgz",
-      "integrity": "sha512-sC95tT5iHHH9gtpj6A81kh+NEaRAUFN+qlUPDUbRfOMvNf5QCBqsb3WgvnpVtK5Y+4UfA6KqufotuTvMGiTlsA==",
+      "version": "4.6.6",
+      "resolved": "https://registry.npmjs.org/zod/-/zod-4.6.6.tgz",
+      "integrity": "sha512-4UmzQUF5fxvfcYHlbjBmejU+w+hbDnWFx4aS8kBx7nPBHcO2SqPbpAG8snbdg+Xse4pRefR98hgjFgIMCI/UhA==",
       "license": "MIT",
       "funding": {
         "url": "https://github.com/sponsors/colinhacks"

package/skills/readme-studio/templates/remotion/package.json

@@ -1 +1 @@
-{"name":"readme-studio-motion","private":true,"type":"module","scripts":{"compositions":"remotion compositions src/index.tsx"},"dependencies":{"@remotion/cli":"4.0.526","remotion":"4.0.526","react":"19.2.0","react-dom":"19.2.0"}}
+{"name":"readme-studio-motion","private":true,"type":"module","scripts":{"compositions":"remotion compositions src/index.tsx"},"dependencies":{"@remotion/cli":"4.0.526","remotion":"4.0.526","react":"19.2.0","react-dom":"19.2.0"},"overrides":{"zod":"4.6.6"}}