@linqapp/sdk-mcp 0.28.2 → 0.30.0

package/local-docs-search.js

@@ -340,11 +340,11 @@ const EMBEDDED_METHODS = [
         endpoint: '/v3/chats/{chatId}/typing',
         httpMethod: 'post',
         summary: 'Start typing indicator',
-        description: "Send a typing indicator to show that someone is typing in the chat.\n\n## Behavior & Limitations\n\nTyping indicators are best-effort signals with the following limitations:\n\n- **Active conversations only:** The recipient must have sent or received a message\n  in this chat within the **last 5 minutes**. If the chat is inactive, the request is\n  still accepted (`204`) but the indicator will not reach the recipient's device.\n\n- **No delivery guarantee:** Even for active chats, a `204` response only indicates\n  the request was accepted for processing.\n\n- **Group chats not supported:** Attempting to start a typing indicator in a group chat\n  will return a `403` error.\n",
+        description: 'Send a typing indicator to show that someone is typing in the chat.\n\n## Behavior\n\nTyping indicators are best-effort signals that behave as follows:\n\n- **iMessage chats only:** Typing indicators are only supported for iMessage chats.\n  Requests for RCS or SMS chats are accepted (`204`) but no indicator is delivered.\n\n- **Send a message first for reliable delivery:** Typing indicators are best-effort.\n  If you have not sent a message in this chat recently (roughly the **last 5 minutes**),\n  a typing indicator may not reach the recipient — the request is still accepted (`204`),\n  but delivery is not deterministic. Once you have sent a message in the chat, typing\n  indicators reliably reach the recipient.\n\n- **No delivery guarantee:** Even for active chats, a `204` response only indicates\n  the request was accepted for processing.\n\n- **Group chats not supported:** Attempting to start a typing indicator in a group chat\n  will return a `403` error.\n\n## Duration & keeping it visible\n\n- A single call shows the indicator for about **85–90 seconds**, then it clears\n  automatically.\n\n- To keep it visible longer, call this endpoint again every **60 seconds**. Each call\n  refreshes the indicator so it stays visible continuously.\n\n- Sending a message clears the indicator.\n\n- To resume typing after sending a message, call this endpoint again.\n\n- Incoming messages do not affect the indicator.\n\n## Recipient re-opening the chat\n\nIf the recipient brings their messaging app to the foreground while the chat has an\nunread message, their device clears any showing typing indicator. Calling this endpoint\nagain on its own may not bring it back. To make it reappear, either send a message, or\ncall `DELETE /v3/chats/{chatId}/typing` (stop) and then call start typing again.\n\n## Recommended usage\n\nCall this endpoint when composing begins, call it again every 60 seconds while\ncomposing, and send the message to clear the indicator. To clear the indicator without\nsending a message, call `DELETE /v3/chats/{chatId}/typing`.\n',
         stainlessPath: '(resource) chats.typing > (method) start',
         qualified: 'client.chats.typing.start',
         params: ['chatId: string;'],
-        markdown: "## start\n\n`client.chats.typing.start(chatId: string): void`\n\n**post** `/v3/chats/{chatId}/typing`\n\nSend a typing indicator to show that someone is typing in the chat.\n\n## Behavior & Limitations\n\nTyping indicators are best-effort signals with the following limitations:\n\n- **Active conversations only:** The recipient must have sent or received a message\n  in this chat within the **last 5 minutes**. If the chat is inactive, the request is\n  still accepted (`204`) but the indicator will not reach the recipient's device.\n\n- **No delivery guarantee:** Even for active chats, a `204` response only indicates\n  the request was accepted for processing.\n\n- **Group chats not supported:** Attempting to start a typing indicator in a group chat\n  will return a `403` error.\n\n\n### Parameters\n\n- `chatId: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nawait client.chats.typing.start('550e8400-e29b-41d4-a716-446655440000')\n```",
+        markdown: "## start\n\n`client.chats.typing.start(chatId: string): void`\n\n**post** `/v3/chats/{chatId}/typing`\n\nSend a typing indicator to show that someone is typing in the chat.\n\n## Behavior\n\nTyping indicators are best-effort signals that behave as follows:\n\n- **iMessage chats only:** Typing indicators are only supported for iMessage chats.\n  Requests for RCS or SMS chats are accepted (`204`) but no indicator is delivered.\n\n- **Send a message first for reliable delivery:** Typing indicators are best-effort.\n  If you have not sent a message in this chat recently (roughly the **last 5 minutes**),\n  a typing indicator may not reach the recipient — the request is still accepted (`204`),\n  but delivery is not deterministic. Once you have sent a message in the chat, typing\n  indicators reliably reach the recipient.\n\n- **No delivery guarantee:** Even for active chats, a `204` response only indicates\n  the request was accepted for processing.\n\n- **Group chats not supported:** Attempting to start a typing indicator in a group chat\n  will return a `403` error.\n\n## Duration & keeping it visible\n\n- A single call shows the indicator for about **85–90 seconds**, then it clears\n  automatically.\n\n- To keep it visible longer, call this endpoint again every **60 seconds**. Each call\n  refreshes the indicator so it stays visible continuously.\n\n- Sending a message clears the indicator.\n\n- To resume typing after sending a message, call this endpoint again.\n\n- Incoming messages do not affect the indicator.\n\n## Recipient re-opening the chat\n\nIf the recipient brings their messaging app to the foreground while the chat has an\nunread message, their device clears any showing typing indicator. Calling this endpoint\nagain on its own may not bring it back. To make it reappear, either send a message, or\ncall `DELETE /v3/chats/{chatId}/typing` (stop) and then call start typing again.\n\n## Recommended usage\n\nCall this endpoint when composing begins, call it again every 60 seconds while\ncomposing, and send the message to clear the indicator. To clear the indicator without\nsending a message, call `DELETE /v3/chats/{chatId}/typing`.\n\n\n### Parameters\n\n- `chatId: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nawait client.chats.typing.start('550e8400-e29b-41d4-a716-446655440000')\n```",
         perLanguage: {
             go: {
                 method: 'client.Chats.Typing.Start',
@@ -368,11 +368,11 @@ const EMBEDDED_METHODS = [
         endpoint: '/v3/chats/{chatId}/typing',
         httpMethod: 'delete',
         summary: 'Stop typing indicator',
-        description: 'Stop the typing indicator for the chat.\n\nTyping indicators are automatically stopped when a message is sent, so calling\nthis endpoint after sending a message is unnecessary.\n\nSee the `POST` endpoint above for behavior details and limitations.\n\n**Note:** Group chats are not supported and will return a `403` error.\n',
+        description: 'Immediately clears the typing indicator for the chat, without sending a message.\n\nThe typing indicator also clears automatically when you send a message, or about\n85–90 seconds after the last `POST /v3/chats/{chatId}/typing` (start typing) request.\n\nSee the start typing endpoint (`POST /v3/chats/{chatId}/typing`) above for behavior\ndetails.\n\n**Note:** Group chats are not supported and will return a `403` error.\n',
         stainlessPath: '(resource) chats.typing > (method) stop',
         qualified: 'client.chats.typing.stop',
         params: ['chatId: string;'],
-        markdown: "## stop\n\n`client.chats.typing.stop(chatId: string): void`\n\n**delete** `/v3/chats/{chatId}/typing`\n\nStop the typing indicator for the chat.\n\nTyping indicators are automatically stopped when a message is sent, so calling\nthis endpoint after sending a message is unnecessary.\n\nSee the `POST` endpoint above for behavior details and limitations.\n\n**Note:** Group chats are not supported and will return a `403` error.\n\n\n### Parameters\n\n- `chatId: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nawait client.chats.typing.stop('550e8400-e29b-41d4-a716-446655440000')\n```",
+        markdown: "## stop\n\n`client.chats.typing.stop(chatId: string): void`\n\n**delete** `/v3/chats/{chatId}/typing`\n\nImmediately clears the typing indicator for the chat, without sending a message.\n\nThe typing indicator also clears automatically when you send a message, or about\n85–90 seconds after the last `POST /v3/chats/{chatId}/typing` (start typing) request.\n\nSee the start typing endpoint (`POST /v3/chats/{chatId}/typing`) above for behavior\ndetails.\n\n**Note:** Group chats are not supported and will return a `403` error.\n\n\n### Parameters\n\n- `chatId: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nawait client.chats.typing.stop('550e8400-e29b-41d4-a716-446655440000')\n```",
         perLanguage: {
             go: {
                 method: 'client.Chats.Typing.Stop',
@@ -457,12 +457,12 @@ const EMBEDDED_METHODS = [
         endpoint: '/v3/chats/{chatId}/location/request',
         httpMethod: 'post',
         summary: 'Request location sharing',
-        description: "Send a location sharing request to a contact. They will receive an iMessage\nprompt asking them to share their location.\n\nLocation requests only work in **1:1 iMessage chats** (Apple limitation).\nAttempting to request location in a group chat, or in an SMS or RCS chat,\nreturns `409` (Operation not supported on this chat's service type).\n",
+        description: 'Request a contact in a chat to share their location. They receive an iMessage\nprompt and must accept before any location is available; once they do, read their\nlocation coordinates with `GET /v3/chats/{chatId}/location`.\n\nThe request is delivered asynchronously. The endpoint returns immediately with\n`{ "success": true, "message": "Location request sent" }` and does not return\ncoordinates.\n\nLocation requests only work in **1:1 iMessage chats** (Apple limitation):\n\n- Group chats (any service) return `409` with code `2016`\n  (`GroupChatNotSupported`).\n- 1:1 SMS and RCS chats return `409` with code `2017`\n  (`ChatServiceNotSupported`).\n',
         stainlessPath: '(resource) chats.location > (method) request',
         qualified: 'client.chats.location.request',
         params: ['chatId: string;'],
         response: '{ message: string; success: boolean; }',
-        markdown: "## request\n\n`client.chats.location.request(chatId: string): { message: string; success: boolean; }`\n\n**post** `/v3/chats/{chatId}/location/request`\n\nSend a location sharing request to a contact. They will receive an iMessage\nprompt asking them to share their location.\n\nLocation requests only work in **1:1 iMessage chats** (Apple limitation).\nAttempting to request location in a group chat, or in an SMS or RCS chat,\nreturns `409` (Operation not supported on this chat's service type).\n\n\n### Parameters\n\n- `chatId: string`\n\n### Returns\n\n- `{ message: string; success: boolean; }`\n\n  - `message: string`\n  - `success: boolean`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst locationRequestResponse = await client.chats.location.request('975d0776-bd17-4273-8337-f346b4c661b0');\n\nconsole.log(locationRequestResponse);\n```",
+        markdown: '## request\n\n`client.chats.location.request(chatId: string): { message: string; success: boolean; }`\n\n**post** `/v3/chats/{chatId}/location/request`\n\nRequest a contact in a chat to share their location. They receive an iMessage\nprompt and must accept before any location is available; once they do, read their\nlocation coordinates with `GET /v3/chats/{chatId}/location`.\n\nThe request is delivered asynchronously. The endpoint returns immediately with\n`{ "success": true, "message": "Location request sent" }` and does not return\ncoordinates.\n\nLocation requests only work in **1:1 iMessage chats** (Apple limitation):\n\n- Group chats (any service) return `409` with code `2016`\n  (`GroupChatNotSupported`).\n- 1:1 SMS and RCS chats return `409` with code `2017`\n  (`ChatServiceNotSupported`).\n\n\n### Parameters\n\n- `chatId: string`\n\n### Returns\n\n- `{ message: string; success: boolean; }`\n\n  - `message: string`\n  - `success: boolean`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from \'@linqapp/sdk\';\n\nconst client = new LinqAPIV3();\n\nconst locationRequestResponse = await client.chats.location.request(\'975d0776-bd17-4273-8337-f346b4c661b0\');\n\nconsole.log(locationRequestResponse);\n```',
         perLanguage: {
             go: {
                 method: 'client.Chats.Location.Request',
@@ -486,12 +486,12 @@ const EMBEDDED_METHODS = [
         endpoint: '/v3/chats/{chatId}/location',
         httpMethod: 'get',
         summary: 'Get location data',
-        description: 'Retrieve the current location for contacts sharing with you in a chat.\n\nThe response is wrapped in the standard `{ "success": true, "data": ... }` envelope —\nthe body is **not** a bare GeoJSON document. `data` is a\n[GeoJSON](https://datatracker.ietf.org/doc/html/rfc7946) `FeatureCollection` with a\n`Feature` for each participant actively sharing their location.\n\nWorks for both 1:1 and group chats. In group chats, `data.features` contains a separate\nfeature for each participant who is sharing. Each feature\'s `properties.handle` identifies the user.\n\nReturns an empty `data.features` array if no one is sharing or no location data is available yet.\n',
+        description: 'Retrieve the current location for contacts sharing with you in a chat.\n\nThe response is wrapped in the standard `{ "success": true, "data": ... }` envelope —\nthe body is **not** a bare GeoJSON document. `data` is a\n[GeoJSON](https://datatracker.ietf.org/doc/html/rfc7946) `FeatureCollection` with a\n`Feature` for each participant actively sharing their location.\n\nWorks for both 1:1 and group chats. In group chats, `data.features` contains a separate\nfeature for each participant who is sharing. Each feature\'s `properties.handle` identifies the user.\n\nReturns an empty `data.features` array if no one is sharing or no location data is\navailable yet. If sharing started but this stays empty, see the **Location Sharing**\noverview.\n\nPoll this endpoint to track a moving contact. `properties.updated_at`\nreflects when each participant\'s location was last updated. There is no\ncoordinate-update webhook. See the **Location Sharing** overview for polling\nguidance.\n',
         stainlessPath: '(resource) chats.location > (method) retrieve',
         qualified: 'client.chats.location.retrieve',
         params: ['chatId: string;'],
         response: "{ data: { features: { geometry: object; properties: object; type: 'Feature'; }[]; type: 'FeatureCollection'; }; success: boolean; }",
-        markdown: "## retrieve\n\n`client.chats.location.retrieve(chatId: string): { data: object; success: boolean; }`\n\n**get** `/v3/chats/{chatId}/location`\n\nRetrieve the current location for contacts sharing with you in a chat.\n\nThe response is wrapped in the standard `{ \"success\": true, \"data\": ... }` envelope —\nthe body is **not** a bare GeoJSON document. `data` is a\n[GeoJSON](https://datatracker.ietf.org/doc/html/rfc7946) `FeatureCollection` with a\n`Feature` for each participant actively sharing their location.\n\nWorks for both 1:1 and group chats. In group chats, `data.features` contains a separate\nfeature for each participant who is sharing. Each feature's `properties.handle` identifies the user.\n\nReturns an empty `data.features` array if no one is sharing or no location data is available yet.\n\n\n### Parameters\n\n- `chatId: string`\n\n### Returns\n\n- `{ data: { features: { geometry: object; properties: object; type: 'Feature'; }[]; type: 'FeatureCollection'; }; success: boolean; }`\n\n  - `data: { features: { geometry: { coordinates: number[]; type: 'Point'; }; properties: { handle: string; address?: string; locality?: string; updated_at?: string; }; type: 'Feature'; }[]; type: 'FeatureCollection'; }`\n  - `success: boolean`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst getChatLocationResponse = await client.chats.location.retrieve('975d0776-bd17-4273-8337-f346b4c661b0');\n\nconsole.log(getChatLocationResponse);\n```",
+        markdown: "## retrieve\n\n`client.chats.location.retrieve(chatId: string): { data: object; success: boolean; }`\n\n**get** `/v3/chats/{chatId}/location`\n\nRetrieve the current location for contacts sharing with you in a chat.\n\nThe response is wrapped in the standard `{ \"success\": true, \"data\": ... }` envelope —\nthe body is **not** a bare GeoJSON document. `data` is a\n[GeoJSON](https://datatracker.ietf.org/doc/html/rfc7946) `FeatureCollection` with a\n`Feature` for each participant actively sharing their location.\n\nWorks for both 1:1 and group chats. In group chats, `data.features` contains a separate\nfeature for each participant who is sharing. Each feature's `properties.handle` identifies the user.\n\nReturns an empty `data.features` array if no one is sharing or no location data is\navailable yet. If sharing started but this stays empty, see the **Location Sharing**\noverview.\n\nPoll this endpoint to track a moving contact. `properties.updated_at`\nreflects when each participant's location was last updated. There is no\ncoordinate-update webhook. See the **Location Sharing** overview for polling\nguidance.\n\n\n### Parameters\n\n- `chatId: string`\n\n### Returns\n\n- `{ data: { features: { geometry: object; properties: object; type: 'Feature'; }[]; type: 'FeatureCollection'; }; success: boolean; }`\n\n  - `data: { features: { geometry: { coordinates: number[]; type: 'Point'; }; properties: { handle: string; address?: string; locality?: string; updated_at?: string; }; type: 'Feature'; }[]; type: 'FeatureCollection'; }`\n  - `success: boolean`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst getChatLocationResponse = await client.chats.location.retrieve('975d0776-bd17-4273-8337-f346b4c661b0');\n\nconsole.log(getChatLocationResponse);\n```",
         perLanguage: {
             go: {
                 method: 'client.Chats.Location.Get',
@@ -515,7 +515,7 @@ const EMBEDDED_METHODS = [
         endpoint: '/v3/messages',
         httpMethod: 'post',
         summary: 'Send a message (auto-selected from-number)',
-        description: 'Send a message to one or more recipients **without supplying a `from`\nnumber**. Linq resolves both the sending line and the target chat for you,\nthen returns exactly which line was used, which chat the message landed in,\nwhether a new chat was created, and every resulting message id.\n\nThis fuses "create chat" and "send message" behind a single\nmessage-centric resource. Provide only the recipients (`to`) and the\n`message`; the platform decides the rest.\n\n## How the from-number and chat are chosen\n\n- **Reuse** — if a chat with exactly these recipients already exists and the\n  line it lives on is healthy, the message is sent into that chat on its\n  existing line (`from_selection.reason = reused_active_chat`).\n- **New** — if no such chat exists, a new chat is created on the best\n  available line (`from_selection.reason = new_best_number`).\n- **Failover** — if a matching chat exists but its line has been flagged, a\n  **new** chat is created on a fresh best line and the flagged chat is\n  abandoned (`from_selection.reason = failover_flagged`,\n  `previous_chat_id` set). If you supply `continuation_message`, that\n  text is sent as the single message INSTEAD of `message` (useful as a\n  fresh-number-appropriate opener). Exactly one message is sent either way.\n\nRecipients (`to`) are an order-independent set: a single handle is a direct\nchat, multiple handles a group chat.\n\n## Differences from POST /v3/chats\n\n- The first message **may contain a link** (including for a newly created\n  chat). Note: sending a link as the very first message on a freshly\n  selected line can elevate that line\'s flagging risk — it is allowed, not\n  recommended.\n- Voice memos are **not** supported here. To send an iMessage voice-memo\n  bubble, use `POST /v3/chats/{chatId}/voicememo` with a known chat id.\n\n## Service preference, effects, decorations\n\nSet `message.preferred_service` (`iMessage` | `RCS` | `SMS`), `message.effect`,\nand per-part `text_decorations` exactly as on the other send endpoints.\n\nAlways responds `202 Accepted` — chat creation is incidental to the send.\n',
+        description: 'Send a message to one or more recipients **without supplying a `from`\nnumber**. Linq resolves both the sending line and the target chat for you,\nthen returns exactly which line was used, which chat the message landed in,\nwhether a new chat was created, and every resulting message id.\n\nThis fuses "create chat" and "send message" behind a single\nmessage-centric resource. Provide only the recipients (`to`) and the\n`message`; the platform decides the rest.\n\n## How the from-number and chat are chosen\n\n- **Reuse** — if a chat with exactly these recipients already exists on a\n  line that can still send, the message is sent into that chat on its\n  existing line (`from_selection.reason = reused_active_chat`). The\n  most-recently-active such chat wins; chats stranded on flagged lines\n  (e.g. by an earlier failover) are skipped.\n- **New** — if no such chat exists, a new chat is created on the best\n  available line (`from_selection.reason = new_best_number`).\n- **Failover** — if matching chats exist but none is on a line that can\n  send, a **new** chat is created on a fresh best line and the flagged chat\n  is abandoned (`from_selection.reason = failover_flagged`,\n  `previous_chat_id` set). If you supply `continuation_message`, that\n  text is sent as the single message INSTEAD of `message` (useful as a\n  fresh-number-appropriate opener). Exactly one message is sent either way.\n\nRecipients (`to`) are an order-independent set: a single handle is a direct\nchat, multiple handles a group chat.\n\n## Differences from POST /v3/chats\n\n- The first message **may contain a link** (including for a newly created\n  chat). Note: sending a link as the very first message on a freshly\n  selected line can elevate that line\'s flagging risk — it is allowed, not\n  recommended.\n- Voice memos are **not** supported here. To send an iMessage voice-memo\n  bubble, use `POST /v3/chats/{chatId}/voicememo` with a known chat id.\n\n## Service preference, effects, decorations\n\nSet `message.preferred_service` (`iMessage` | `RCS` | `SMS`), `message.effect`,\nand per-part `text_decorations` exactly as on the other send endpoints.\n\nAlways responds `202 Accepted` — chat creation is incidental to the send.\n',
         stainlessPath: '(resource) messages > (method) create',
         qualified: 'client.messages.create',
         params: [
@@ -525,7 +525,7 @@ const EMBEDDED_METHODS = [
             'Idempotency-Key?: string;',
         ],
         response: "{ chat_id: string; created_new_chat: boolean; from: string; from_selection: { reason: 'reused_active_chat' | 'new_best_number' | 'failover_flagged'; reused_existing_chat: boolean; }; handles: { id: string; handle: string; joined_at: string; service: service_type; is_me?: boolean; left_at?: string; status?: 'active' | 'left' | 'removed'; }[]; is_group: boolean; message: { id: string; created_at: string; delivery_status: 'pending' | 'queued' | 'sent' | 'delivered' | 'received' | 'read' | 'failed'; is_read: boolean; parts: text_part_response | media_part_response | link_part_response | object[]; sent_at: string; delivered_at?: string; effect?: message_effect; from_handle?: chat_handle; preferred_service?: service_type; reply_to?: reply_to; service?: service_type; }; service: 'iMessage' | 'SMS' | 'RCS'; previous_chat_id?: string; }",
-        markdown: "## create\n\n`client.messages.create(message: { parts: text_part | media_part | link_part | object[]; effect?: message_effect; idempotency_key?: string; preferred_service?: service_type; reply_to?: reply_to; }, to: string[], continuation_message?: { text: string; }, Idempotency-Key?: string): { chat_id: string; created_new_chat: boolean; from: string; from_selection: object; handles: chat_handle[]; is_group: boolean; message: sent_message; service: service_type; previous_chat_id?: string; }`\n\n**post** `/v3/messages`\n\nSend a message to one or more recipients **without supplying a `from`\nnumber**. Linq resolves both the sending line and the target chat for you,\nthen returns exactly which line was used, which chat the message landed in,\nwhether a new chat was created, and every resulting message id.\n\nThis fuses \"create chat\" and \"send message\" behind a single\nmessage-centric resource. Provide only the recipients (`to`) and the\n`message`; the platform decides the rest.\n\n## How the from-number and chat are chosen\n\n- **Reuse** — if a chat with exactly these recipients already exists and the\n  line it lives on is healthy, the message is sent into that chat on its\n  existing line (`from_selection.reason = reused_active_chat`).\n- **New** — if no such chat exists, a new chat is created on the best\n  available line (`from_selection.reason = new_best_number`).\n- **Failover** — if a matching chat exists but its line has been flagged, a\n  **new** chat is created on a fresh best line and the flagged chat is\n  abandoned (`from_selection.reason = failover_flagged`,\n  `previous_chat_id` set). If you supply `continuation_message`, that\n  text is sent as the single message INSTEAD of `message` (useful as a\n  fresh-number-appropriate opener). Exactly one message is sent either way.\n\nRecipients (`to`) are an order-independent set: a single handle is a direct\nchat, multiple handles a group chat.\n\n## Differences from POST /v3/chats\n\n- The first message **may contain a link** (including for a newly created\n  chat). Note: sending a link as the very first message on a freshly\n  selected line can elevate that line's flagging risk — it is allowed, not\n  recommended.\n- Voice memos are **not** supported here. To send an iMessage voice-memo\n  bubble, use `POST /v3/chats/{chatId}/voicememo` with a known chat id.\n\n## Service preference, effects, decorations\n\nSet `message.preferred_service` (`iMessage` | `RCS` | `SMS`), `message.effect`,\nand per-part `text_decorations` exactly as on the other send endpoints.\n\nAlways responds `202 Accepted` — chat creation is incidental to the send.\n\n\n### Parameters\n\n- `message: { parts: { type: 'text'; value: string; text_decorations?: text_decoration[]; } | { type: 'media'; attachment_id?: string; url?: string; } | { type: 'link'; value: string; } | { app: { bundle_id: string; name: string; team_id: string; app_store_id?: number; }; layout: { caption?: string; image_subtitle?: string; image_title?: string; image_url?: string; subcaption?: string; trailing_caption?: string; trailing_subcaption?: string; }; type: 'imessage_app'; fallback_text?: string; interactive?: boolean; url?: string; }[]; effect?: { name?: string; type?: 'screen' | 'bubble'; }; idempotency_key?: string; preferred_service?: 'iMessage' | 'SMS' | 'RCS'; reply_to?: { message_id: string; part_index?: number; }; }`\n  Message content container. Groups all message-related fields together,\nseparating the \"what\" (message content) from the \"where\" (routing fields like from/to).\n\n  - `parts: { type: 'text'; value: string; text_decorations?: { range: number[]; animation?: 'big' | 'small' | 'shake' | 'nod' | 'explode' | 'ripple' | 'bloom' | 'jitter'; style?: 'bold' | 'italic' | 'strikethrough' | 'underline'; }[]; } | { type: 'media'; attachment_id?: string; url?: string; } | { type: 'link'; value: string; } | { app: { bundle_id: string; name: string; team_id: string; app_store_id?: number; }; layout: { caption?: string; image_subtitle?: string; image_title?: string; image_url?: string; subcaption?: string; trailing_caption?: string; trailing_subcaption?: string; }; type: 'imessage_app'; fallback_text?: string; interactive?: boolean; url?: string; }[]`\n    Array of message parts. Each part can be text, media, or link.\nParts are displayed in order. Text and media can be mixed freely,\nbut a `link` part must be the only part in the message.\n\n**Rich Link Previews:**\n- Use a `link` part to send a URL with a rich preview card\n- A `link` part must be the **only** part in the message\n- To send a URL as plain text (no preview), use a `text` part instead\n\n**Supported Media:**\n- Images: .jpg, .jpeg, .png, .gif, .heic, .heif, .tif, .tiff, .bmp\n- Videos: .mp4, .mov, .m4v, .mpeg, .mpg, .3gp\n- Audio: .m4a, .mp3, .aac, .caf, .wav, .aiff, .amr\n- Documents: .pdf, .txt, .rtf, .csv, .doc, .docx, .xls, .xlsx, .ppt, .pptx, .pages, .numbers, .key, .epub, .zip, .html, .htm\n- Contact & Calendar: .vcf, .ics\n\n**Audio:**\n- Audio files (.m4a, .mp3, .aac, .caf, .wav, .aiff, .amr) are fully supported as media parts\n- To send audio as an **iMessage voice memo bubble** (inline playback UI), use the dedicated\n  `/v3/chats/{chatId}/voicememo` endpoint instead\n\n**Validation Rules:**\n- A `link` part must be the **only** part in the message. It cannot be combined\n  with text or media parts.\n- Consecutive text parts are not allowed. Text parts must be separated by\n  media parts. For example, [text, text] is invalid, but [text, media, text] is valid.\n- Maximum of **100 parts** total.\n- Media parts using a public `url` (downloaded by the server on send) are\n  capped at **40**. Parts using `attachment_id` or presigned URLs\n  are exempt from this sub-limit. For bulk media sends exceeding 40 files,\n  pre-upload via `POST /v3/attachments` and reference by `attachment_id` or `download_url`.\n\n  - `effect?: { name?: string; type?: 'screen' | 'bubble'; }`\n    iMessage effect to apply to this message (screen or bubble effect)\n  - `idempotency_key?: string`\n    Optional idempotency key for this message.\nUse this to prevent duplicate sends of the same message.\n\n  - `preferred_service?: 'iMessage' | 'SMS' | 'RCS'`\n    Messaging service type\n  - `reply_to?: { message_id: string; part_index?: number; }`\n    Reply to another message to create a threaded conversation\n\n- `to: string[]`\n  Recipient handles (E.164 phone numbers or email addresses). One handle\nis a direct chat; multiple handles a group chat. Order-independent — the\nset identifies the chat.\n\n\n- `continuation_message?: { text: string; }`\n  Text-only fallback that **replaces** `message` ONLY on the failover branch —\nwhen a chat with these recipients already existed but its line was flagged,\nso a new chat is created on a fresh line. On that branch this text is sent as\nthe single message instead of `message` (the recipient is on a new number, so\nyou typically want a fresh-number-appropriate opener rather than the original\ncontent). Ignored otherwise (a healthy reuse, or genuine first contact).\nCarries no parts, media, or effects — exactly one message is ever sent.\n\n  - `text: string`\n    The replacement message text, sent as the single message on failover.\n\n- `Idempotency-Key?: string`\n\n### Returns\n\n- `{ chat_id: string; created_new_chat: boolean; from: string; from_selection: { reason: 'reused_active_chat' | 'new_best_number' | 'failover_flagged'; reused_existing_chat: boolean; }; handles: { id: string; handle: string; joined_at: string; service: service_type; is_me?: boolean; left_at?: string; status?: 'active' | 'left' | 'removed'; }[]; is_group: boolean; message: { id: string; created_at: string; delivery_status: 'pending' | 'queued' | 'sent' | 'delivered' | 'received' | 'read' | 'failed'; is_read: boolean; parts: text_part_response | media_part_response | link_part_response | object[]; sent_at: string; delivered_at?: string; effect?: message_effect; from_handle?: chat_handle; preferred_service?: service_type; reply_to?: reply_to; service?: service_type; }; service: 'iMessage' | 'SMS' | 'RCS'; previous_chat_id?: string; }`\n  Result of an auto-from send. Self-describing: which line was used, which\nchat the message landed in, whether a new chat was created, and the\nresulting message id(s).\n\n\n  - `chat_id: string`\n  - `created_new_chat: boolean`\n  - `from: string`\n  - `from_selection: { reason: 'reused_active_chat' | 'new_best_number' | 'failover_flagged'; reused_existing_chat: boolean; }`\n  - `handles: { id: string; handle: string; joined_at: string; service: 'iMessage' | 'SMS' | 'RCS'; is_me?: boolean; left_at?: string; status?: 'active' | 'left' | 'removed'; }[]`\n  - `is_group: boolean`\n  - `message: { id: string; created_at: string; delivery_status: 'pending' | 'queued' | 'sent' | 'delivered' | 'received' | 'read' | 'failed'; is_read: boolean; parts: { reactions: reaction[]; type: 'text'; value: string; text_decorations?: text_decoration[]; } | { id: string; filename: string; mime_type: string; reactions: reaction[]; size_bytes: number; type: 'media'; url: string; } | { reactions: reaction[]; type: 'link'; value: string; } | { app: { bundle_id: string; name: string; team_id: string; app_store_id?: number; }; layout: { caption?: string; image_subtitle?: string; image_title?: string; image_url?: string; subcaption?: string; trailing_caption?: string; trailing_subcaption?: string; }; reactions: object[]; type: 'imessage_app'; url: string; fallback_text?: string; }[]; sent_at: string; delivered_at?: string; effect?: { name?: string; type?: 'screen' | 'bubble'; }; from_handle?: { id: string; handle: string; joined_at: string; service: service_type; is_me?: boolean; left_at?: string; status?: 'active' | 'left' | 'removed'; }; preferred_service?: 'iMessage' | 'SMS' | 'RCS'; reply_to?: { message_id: string; part_index?: number; }; service?: 'iMessage' | 'SMS' | 'RCS'; }`\n  - `service: 'iMessage' | 'SMS' | 'RCS'`\n  - `previous_chat_id?: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst message = await client.messages.create({\n  message: { parts: [{ type: 'text', value: 'Hi! Thanks for reaching out — how can we help?' }] },\n  to: ['+14155559876'],\n});\n\nconsole.log(message);\n```",
+        markdown: "## create\n\n`client.messages.create(message: { parts: text_part | media_part | link_part | object[]; effect?: message_effect; idempotency_key?: string; preferred_service?: service_type; reply_to?: reply_to; }, to: string[], continuation_message?: { text: string; }, Idempotency-Key?: string): { chat_id: string; created_new_chat: boolean; from: string; from_selection: object; handles: chat_handle[]; is_group: boolean; message: sent_message; service: service_type; previous_chat_id?: string; }`\n\n**post** `/v3/messages`\n\nSend a message to one or more recipients **without supplying a `from`\nnumber**. Linq resolves both the sending line and the target chat for you,\nthen returns exactly which line was used, which chat the message landed in,\nwhether a new chat was created, and every resulting message id.\n\nThis fuses \"create chat\" and \"send message\" behind a single\nmessage-centric resource. Provide only the recipients (`to`) and the\n`message`; the platform decides the rest.\n\n## How the from-number and chat are chosen\n\n- **Reuse** — if a chat with exactly these recipients already exists on a\n  line that can still send, the message is sent into that chat on its\n  existing line (`from_selection.reason = reused_active_chat`). The\n  most-recently-active such chat wins; chats stranded on flagged lines\n  (e.g. by an earlier failover) are skipped.\n- **New** — if no such chat exists, a new chat is created on the best\n  available line (`from_selection.reason = new_best_number`).\n- **Failover** — if matching chats exist but none is on a line that can\n  send, a **new** chat is created on a fresh best line and the flagged chat\n  is abandoned (`from_selection.reason = failover_flagged`,\n  `previous_chat_id` set). If you supply `continuation_message`, that\n  text is sent as the single message INSTEAD of `message` (useful as a\n  fresh-number-appropriate opener). Exactly one message is sent either way.\n\nRecipients (`to`) are an order-independent set: a single handle is a direct\nchat, multiple handles a group chat.\n\n## Differences from POST /v3/chats\n\n- The first message **may contain a link** (including for a newly created\n  chat). Note: sending a link as the very first message on a freshly\n  selected line can elevate that line's flagging risk — it is allowed, not\n  recommended.\n- Voice memos are **not** supported here. To send an iMessage voice-memo\n  bubble, use `POST /v3/chats/{chatId}/voicememo` with a known chat id.\n\n## Service preference, effects, decorations\n\nSet `message.preferred_service` (`iMessage` | `RCS` | `SMS`), `message.effect`,\nand per-part `text_decorations` exactly as on the other send endpoints.\n\nAlways responds `202 Accepted` — chat creation is incidental to the send.\n\n\n### Parameters\n\n- `message: { parts: { type: 'text'; value: string; text_decorations?: text_decoration[]; } | { type: 'media'; attachment_id?: string; url?: string; } | { type: 'link'; value: string; } | { app: { bundle_id: string; name: string; team_id: string; app_store_id?: number; }; layout: { caption?: string; image_subtitle?: string; image_title?: string; image_url?: string; subcaption?: string; trailing_caption?: string; trailing_subcaption?: string; }; type: 'imessage_app'; fallback_text?: string; interactive?: boolean; url?: string; }[]; effect?: { name?: string; type?: 'screen' | 'bubble'; }; idempotency_key?: string; preferred_service?: 'iMessage' | 'SMS' | 'RCS'; reply_to?: { message_id: string; part_index?: number; }; }`\n  Message content container. Groups all message-related fields together,\nseparating the \"what\" (message content) from the \"where\" (routing fields like from/to).\n\n  - `parts: { type: 'text'; value: string; text_decorations?: { range: number[]; animation?: 'big' | 'small' | 'shake' | 'nod' | 'explode' | 'ripple' | 'bloom' | 'jitter'; style?: 'bold' | 'italic' | 'strikethrough' | 'underline'; }[]; } | { type: 'media'; attachment_id?: string; url?: string; } | { type: 'link'; value: string; } | { app: { bundle_id: string; name: string; team_id: string; app_store_id?: number; }; layout: { caption?: string; image_subtitle?: string; image_title?: string; image_url?: string; subcaption?: string; trailing_caption?: string; trailing_subcaption?: string; }; type: 'imessage_app'; fallback_text?: string; interactive?: boolean; url?: string; }[]`\n    Array of message parts. Each part can be text, media, or link.\nParts are displayed in order. Text and media can be mixed freely,\nbut a `link` part must be the only part in the message.\n\n**Rich Link Previews:**\n- Use a `link` part to send a URL with a rich preview card\n- A `link` part must be the **only** part in the message\n- To send a URL as plain text (no preview), use a `text` part instead\n\n**Supported Media:**\n- Images: .jpg, .jpeg, .png, .gif, .heic, .heif, .tif, .tiff, .bmp\n- Videos: .mp4, .mov, .m4v, .mpeg, .mpg, .3gp\n- Audio: .m4a, .mp3, .aac, .caf, .wav, .aiff, .amr\n- Documents: .pdf, .txt, .rtf, .csv, .doc, .docx, .xls, .xlsx, .ppt, .pptx, .pages, .numbers, .key, .epub, .zip, .html, .htm\n- Contact & Calendar: .vcf, .ics\n\n**Audio:**\n- Audio files (.m4a, .mp3, .aac, .caf, .wav, .aiff, .amr) are fully supported as media parts\n- To send audio as an **iMessage voice memo bubble** (inline playback UI), use the dedicated\n  `/v3/chats/{chatId}/voicememo` endpoint instead\n\n**Validation Rules:**\n- A `link` part must be the **only** part in the message. It cannot be combined\n  with text or media parts.\n- Consecutive text parts are not allowed. Text parts must be separated by\n  media parts. For example, [text, text] is invalid, but [text, media, text] is valid.\n- Maximum of **100 parts** total.\n- Media parts using a public `url` (downloaded by the server on send) are\n  capped at **40**. Parts using `attachment_id` or presigned URLs\n  are exempt from this sub-limit. For bulk media sends exceeding 40 files,\n  pre-upload via `POST /v3/attachments` and reference by `attachment_id` or `download_url`.\n\n  - `effect?: { name?: string; type?: 'screen' | 'bubble'; }`\n    iMessage effect to apply to this message (screen or bubble effect)\n  - `idempotency_key?: string`\n    Optional idempotency key for this message.\nUse this to prevent duplicate sends of the same message.\n\n  - `preferred_service?: 'iMessage' | 'SMS' | 'RCS'`\n    Messaging service type\n  - `reply_to?: { message_id: string; part_index?: number; }`\n    Reply to another message to create a threaded conversation\n\n- `to: string[]`\n  Recipient handles (E.164 phone numbers or email addresses). One handle\nis a direct chat; multiple handles a group chat. Order-independent — the\nset identifies the chat.\n\n\n- `continuation_message?: { text: string; }`\n  Text-only fallback that **replaces** `message` ONLY on the failover branch —\nwhen a chat with these recipients already existed but its line was flagged,\nso a new chat is created on a fresh line. On that branch this text is sent as\nthe single message instead of `message` (the recipient is on a new number, so\nyou typically want a fresh-number-appropriate opener rather than the original\ncontent). Ignored otherwise (a healthy reuse, or genuine first contact).\nCarries no parts, media, or effects — exactly one message is ever sent.\n\n  - `text: string`\n    The replacement message text, sent as the single message on failover.\n\n- `Idempotency-Key?: string`\n\n### Returns\n\n- `{ chat_id: string; created_new_chat: boolean; from: string; from_selection: { reason: 'reused_active_chat' | 'new_best_number' | 'failover_flagged'; reused_existing_chat: boolean; }; handles: { id: string; handle: string; joined_at: string; service: service_type; is_me?: boolean; left_at?: string; status?: 'active' | 'left' | 'removed'; }[]; is_group: boolean; message: { id: string; created_at: string; delivery_status: 'pending' | 'queued' | 'sent' | 'delivered' | 'received' | 'read' | 'failed'; is_read: boolean; parts: text_part_response | media_part_response | link_part_response | object[]; sent_at: string; delivered_at?: string; effect?: message_effect; from_handle?: chat_handle; preferred_service?: service_type; reply_to?: reply_to; service?: service_type; }; service: 'iMessage' | 'SMS' | 'RCS'; previous_chat_id?: string; }`\n  Result of an auto-from send. Self-describing: which line was used, which\nchat the message landed in, whether a new chat was created, and the\nresulting message id(s).\n\n\n  - `chat_id: string`\n  - `created_new_chat: boolean`\n  - `from: string`\n  - `from_selection: { reason: 'reused_active_chat' | 'new_best_number' | 'failover_flagged'; reused_existing_chat: boolean; }`\n  - `handles: { id: string; handle: string; joined_at: string; service: 'iMessage' | 'SMS' | 'RCS'; is_me?: boolean; left_at?: string; status?: 'active' | 'left' | 'removed'; }[]`\n  - `is_group: boolean`\n  - `message: { id: string; created_at: string; delivery_status: 'pending' | 'queued' | 'sent' | 'delivered' | 'received' | 'read' | 'failed'; is_read: boolean; parts: { reactions: reaction[]; type: 'text'; value: string; text_decorations?: text_decoration[]; } | { id: string; filename: string; mime_type: string; reactions: reaction[]; size_bytes: number; type: 'media'; url: string; } | { reactions: reaction[]; type: 'link'; value: string; } | { app: { bundle_id: string; name: string; team_id: string; app_store_id?: number; }; layout: { caption?: string; image_subtitle?: string; image_title?: string; image_url?: string; subcaption?: string; trailing_caption?: string; trailing_subcaption?: string; }; reactions: object[]; type: 'imessage_app'; url: string; fallback_text?: string; }[]; sent_at: string; delivered_at?: string; effect?: { name?: string; type?: 'screen' | 'bubble'; }; from_handle?: { id: string; handle: string; joined_at: string; service: service_type; is_me?: boolean; left_at?: string; status?: 'active' | 'left' | 'removed'; }; preferred_service?: 'iMessage' | 'SMS' | 'RCS'; reply_to?: { message_id: string; part_index?: number; }; service?: 'iMessage' | 'SMS' | 'RCS'; }`\n  - `service: 'iMessage' | 'SMS' | 'RCS'`\n  - `previous_chat_id?: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst message = await client.messages.create({\n  message: { parts: [{ type: 'text', value: 'Hi! Thanks for reaching out — how can we help?' }] },\n  to: ['+14155559876'],\n});\n\nconsole.log(message);\n```",
         perLanguage: {
             go: {
                 method: 'client.Messages.New',
@@ -739,7 +739,7 @@ const EMBEDDED_METHODS = [
         qualified: 'client.attachments.create',
         params: ['content_type: string;', 'filename: string;', 'size_bytes: number;'],
         response: "{ attachment_id: string; download_url: string; expires_at: string; http_method: 'PUT'; required_headers: object; upload_url: string; }",
-        markdown: '## create\n\n`client.attachments.create(content_type: string, filename: string, size_bytes: number): { attachment_id: string; download_url: string; expires_at: string; http_method: \'PUT\'; required_headers: object; upload_url: string; }`\n\n**post** `/v3/attachments`\n\n**This endpoint is optional.** You can send media by simply providing a URL in your\nmessage\'s media part — no pre-upload required. Use this endpoint only when you want\nto upload a file ahead of time for reuse or latency optimization.\n\nReturns a presigned upload URL and a permanent `attachment_id` you can reference\nin future messages.\n\n## Step 1: Request an upload URL\n\nCall this endpoint with file metadata:\n\n```json\nPOST /v3/attachments\n{\n  "filename": "photo.jpg",\n  "content_type": "image/jpeg",\n  "size_bytes": 1024000\n}\n```\n\nThe response includes an `upload_url` (valid for 15 minutes) and a permanent `attachment_id`.\n\n## Step 2: Upload the file\n\nMake a PUT request to the `upload_url` with the raw file bytes as the request body.\nYou **must** include all headers from `required_headers` exactly as returned — the presigned URL\nis signed with these values and S3 will reject the upload if they don\'t match.\n\nThe request body is the binary file content — **not** JSON, **not** multipart form data.\nThe file must equal `size_bytes` bytes (the value you declared in step 1).\n\n```bash\ncurl -X PUT "<upload_url from step 1>" \\\n  -H "Content-Type: image/jpeg" \\\n  -H "Content-Length: 1024000" \\\n  --data-binary @photo.jpg\n```\n\n## Step 3: Send a message with the attachment\n\nReference the `attachment_id` in a media part. The ID never expires — use it in as many messages as you want.\n\n```json\nPOST /v3/chats\n{\n  "from": "+15559876543",\n  "to": ["+15551234567"],\n  "message": {\n    "parts": [\n      { "type": "media", "attachment_id": "<attachment_id from step 1>" }\n    ]\n  }\n}\n```\n\n## When to use this instead of a URL in the media part\n\n- Sending the same file to multiple recipients (avoids re-downloading each time)\n- Large files where you want to separate upload from message send\n- Latency-sensitive sends where the file should already be stored\n\nIf you just need to send a file once, skip all of this and pass a `url` directly in the media part instead.\n\n**File Size Limit:** 100MB\n\n**Unsupported Types:** WebP, SVG, FLAC, OGG, and executable files are explicitly rejected.\n\n\n### Parameters\n\n- `content_type: string`\n  Supported MIME types for file attachments and media URLs.\n\n**Images:** image/jpeg, image/png, image/gif, image/heic, image/heif, image/tiff, image/bmp, image/svg+xml, image/webp, image/x-icon\n\n**Videos:** video/mp4, video/quicktime, video/mpeg, video/mpeg2, video/x-msvideo, video/3gpp\n\n**Audio:** audio/mpeg, audio/x-m4a, audio/x-caf, audio/x-wav, audio/x-aiff, audio/aac, audio/midi, audio/amr\n\n**Documents:** application/pdf, text/plain, text/markdown, text/vcard, text/rtf, text/csv, text/html, text/calendar, text/xml, application/json, application/msword, application/vnd.openxmlformats-officedocument.wordprocessingml.document, application/vnd.ms-excel, application/vnd.openxmlformats-officedocument.spreadsheetml.sheet, application/vnd.ms-powerpoint, application/vnd.openxmlformats-officedocument.presentationml.presentation, application/x-iwork-pages-sffpages, application/x-iwork-numbers-sffnumbers, application/x-iwork-keynote-sffkey, application/epub+zip, application/zip, application/x-gzip\n\n**Transcoded on delivery:**\n- `audio/x-caf` — CAF files are transcoded to `audio/mp4` for delivery.\n\n**Deprecated (accepted but transcoded):**\n- `audio/mp3` — Deprecated. Use `audio/mpeg` instead. Files sent as audio/mp3 will be delivered as audio/mpeg.\n- `audio/mp4` — Deprecated. Use `audio/x-m4a` instead. Files sent as audio/mp4 will be delivered as audio/x-m4a.\n- `audio/aiff` — Deprecated. Use `audio/x-aiff` instead. Files sent as audio/aiff will be delivered as audio/x-aiff.\n- `image/tiff` — Accepted, but TIFF images are transcoded to JPEG for delivery.\n\n**Unsupported:** FLAC, OGG, and executable files are explicitly rejected.\n\n\n- `filename: string`\n  Name of the file to upload\n\n- `size_bytes: number`\n  Size of the file in bytes (max 100MB)\n\n### Returns\n\n- `{ attachment_id: string; download_url: string; expires_at: string; http_method: \'PUT\'; required_headers: object; upload_url: string; }`\n\n  - `attachment_id: string`\n  - `download_url: string`\n  - `expires_at: string`\n  - `http_method: \'PUT\'`\n  - `required_headers: object`\n  - `upload_url: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from \'@linqapp/sdk\';\n\nconst client = new LinqAPIV3();\n\nconst attachment = await client.attachments.create({\n  content_type: \'image/jpeg\',\n  filename: \'photo.jpg\',\n  size_bytes: 1024000,\n});\n\nconsole.log(attachment);\n```',
+        markdown: '## create\n\n`client.attachments.create(content_type: string, filename: string, size_bytes: number): { attachment_id: string; download_url: string; expires_at: string; http_method: \'PUT\'; required_headers: object; upload_url: string; }`\n\n**post** `/v3/attachments`\n\n**This endpoint is optional.** You can send media by simply providing a URL in your\nmessage\'s media part — no pre-upload required. Use this endpoint only when you want\nto upload a file ahead of time for reuse or latency optimization.\n\nReturns a presigned upload URL and a permanent `attachment_id` you can reference\nin future messages.\n\n## Step 1: Request an upload URL\n\nCall this endpoint with file metadata:\n\n```json\nPOST /v3/attachments\n{\n  "filename": "photo.jpg",\n  "content_type": "image/jpeg",\n  "size_bytes": 1024000\n}\n```\n\nThe response includes an `upload_url` (valid for 15 minutes) and a permanent `attachment_id`.\n\n## Step 2: Upload the file\n\nMake a PUT request to the `upload_url` with the raw file bytes as the request body.\nYou **must** include all headers from `required_headers` exactly as returned — the presigned URL\nis signed with these values and S3 will reject the upload if they don\'t match.\n\nThe request body is the binary file content — **not** JSON, **not** multipart form data.\nThe file must equal `size_bytes` bytes (the value you declared in step 1).\n\n```bash\ncurl -X PUT "<upload_url from step 1>" \\\n  -H "Content-Type: image/jpeg" \\\n  -H "Content-Length: 1024000" \\\n  --data-binary @photo.jpg\n```\n\n## Step 3: Send a message with the attachment\n\nReference the `attachment_id` in a media part. The ID never expires — use it in as many messages as you want.\n\n```json\nPOST /v3/chats\n{\n  "from": "+15559876543",\n  "to": ["+15551234567"],\n  "message": {\n    "parts": [\n      { "type": "media", "attachment_id": "<attachment_id from step 1>" }\n    ]\n  }\n}\n```\n\n## When to use this instead of a URL in the media part\n\n- Sending the same file to multiple recipients (avoids re-downloading each time)\n- Large files where you want to separate upload from message send\n- Latency-sensitive sends where the file should already be stored\n\nIf you just need to send a file once, skip all of this and pass a `url` directly in the media part instead.\n\n**File Size Limit:** 100MB\n\n**Unsupported Types:** WebP, SVG, FLAC, OGG, and executable files are explicitly rejected.\n\n\n### Parameters\n\n- `content_type: string`\n  Supported MIME types for file attachments and media URLs.\n\n**Images:** image/jpeg, image/png, image/gif, image/heic, image/heif, image/tiff, image/bmp, image/svg+xml, image/webp, image/x-icon\n\n**Videos:** video/mp4, video/quicktime, video/mpeg, video/mpeg2, video/x-msvideo, video/3gpp\n\n**Audio:** audio/mpeg, audio/x-m4a, audio/x-caf, audio/x-wav, audio/x-aiff, audio/aac, audio/midi, audio/amr\n\n**Wallet passes:** application/vnd.apple.pkpass\n\n**Documents:** application/pdf, text/plain, text/markdown, text/vcard, text/rtf, text/csv, text/html, text/calendar, text/xml, application/json, application/msword, application/vnd.openxmlformats-officedocument.wordprocessingml.document, application/vnd.ms-excel, application/vnd.openxmlformats-officedocument.spreadsheetml.sheet, application/vnd.ms-powerpoint, application/vnd.openxmlformats-officedocument.presentationml.presentation, application/x-iwork-pages-sffpages, application/x-iwork-numbers-sffnumbers, application/x-iwork-keynote-sffkey, application/epub+zip, application/zip, application/x-gzip\n\n**Transcoded on delivery:**\n- `audio/x-caf` — CAF files are transcoded to `audio/mp4` for delivery.\n\n**Deprecated (accepted but transcoded):**\n- `audio/mp3` — Deprecated. Use `audio/mpeg` instead. Files sent as audio/mp3 will be delivered as audio/mpeg.\n- `audio/mp4` — Deprecated. Use `audio/x-m4a` instead. Files sent as audio/mp4 will be delivered as audio/x-m4a.\n- `audio/aiff` — Deprecated. Use `audio/x-aiff` instead. Files sent as audio/aiff will be delivered as audio/x-aiff.\n- `image/tiff` — Accepted, but TIFF images are transcoded to JPEG for delivery.\n\n**Unsupported:** FLAC, OGG, and executable files are explicitly rejected.\n\n\n- `filename: string`\n  Name of the file to upload\n\n- `size_bytes: number`\n  Size of the file in bytes (max 100MB)\n\n### Returns\n\n- `{ attachment_id: string; download_url: string; expires_at: string; http_method: \'PUT\'; required_headers: object; upload_url: string; }`\n\n  - `attachment_id: string`\n  - `download_url: string`\n  - `expires_at: string`\n  - `http_method: \'PUT\'`\n  - `required_headers: object`\n  - `upload_url: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from \'@linqapp/sdk\';\n\nconst client = new LinqAPIV3();\n\nconst attachment = await client.attachments.create({\n  content_type: \'image/jpeg\',\n  filename: \'photo.jpg\',\n  size_bytes: 1024000,\n});\n\nconsole.log(attachment);\n```',
         perLanguage: {
             go: {
                 method: 'client.Attachments.New',
@@ -851,8 +851,8 @@ const EMBEDDED_METHODS = [
         description: 'Returns all phone numbers assigned to the authenticated partner.\nUse this endpoint to discover which phone numbers are available for\nuse as the `from` field when creating a chat, listing chats, or sending a voice memo.\n',
         stainlessPath: '(resource) phone_numbers > (method) list',
         qualified: 'client.phoneNumbers.list',
-        response: "{ phone_numbers: { id: string; health_status: { doc_url: string; status: 'HEALTHY' | 'AT_RISK' | 'CRITICAL'; }; phone_number: string; reputation: { doc_url: string; status: 'HEALTHY' | 'AT_RISK' | 'CRITICAL'; }; forwarding_number?: string; }[]; }",
-        markdown: "## list\n\n`client.phoneNumbers.list(): { phone_numbers: object[]; }`\n\n**get** `/v3/phone_numbers`\n\nReturns all phone numbers assigned to the authenticated partner.\nUse this endpoint to discover which phone numbers are available for\nuse as the `from` field when creating a chat, listing chats, or sending a voice memo.\n\n\n### Returns\n\n- `{ phone_numbers: { id: string; health_status: { doc_url: string; status: 'HEALTHY' | 'AT_RISK' | 'CRITICAL'; }; phone_number: string; reputation: { doc_url: string; status: 'HEALTHY' | 'AT_RISK' | 'CRITICAL'; }; forwarding_number?: string; }[]; }`\n\n  - `phone_numbers: { id: string; health_status: { doc_url: string; status: 'HEALTHY' | 'AT_RISK' | 'CRITICAL'; }; phone_number: string; reputation: { doc_url: string; status: 'HEALTHY' | 'AT_RISK' | 'CRITICAL'; }; forwarding_number?: string; }[]`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst phoneNumbers = await client.phoneNumbers.list();\n\nconsole.log(phoneNumbers);\n```",
+        response: "{ phone_numbers: { id: string; phone_number: string; reputation: { doc_url: string; status: 'HEALTHY' | 'AT_RISK' | 'CRITICAL'; }; forwarding_number?: string; }[]; }",
+        markdown: "## list\n\n`client.phoneNumbers.list(): { phone_numbers: object[]; }`\n\n**get** `/v3/phone_numbers`\n\nReturns all phone numbers assigned to the authenticated partner.\nUse this endpoint to discover which phone numbers are available for\nuse as the `from` field when creating a chat, listing chats, or sending a voice memo.\n\n\n### Returns\n\n- `{ phone_numbers: { id: string; phone_number: string; reputation: { doc_url: string; status: 'HEALTHY' | 'AT_RISK' | 'CRITICAL'; }; forwarding_number?: string; }[]; }`\n\n  - `phone_numbers: { id: string; phone_number: string; reputation: { doc_url: string; status: 'HEALTHY' | 'AT_RISK' | 'CRITICAL'; }; forwarding_number?: string; }[]`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst phoneNumbers = await client.phoneNumbers.list();\n\nconsole.log(phoneNumbers);\n```",
         perLanguage: {
             go: {
                 method: 'client.PhoneNumbers.List',
@@ -905,12 +905,12 @@ const EMBEDDED_METHODS = [
         endpoint: '/v3/available_number',
         httpMethod: 'get',
         summary: 'Get an available sending number',
-        description: 'Returns the best available line (E.164) to send from, applying smart\nnumber assignment. Optionally pass `to` recipients to make the choice\n"sticky" — reusing the line an existing chat with those recipients is\nalready on. Without `to`, the best healthy line is chosen.\n\nThis is advisory: it does not reserve the line or change selection state.\nPass the returned `phone_number` as `from` when you create the chat to\nguarantee the same line.\n\nAlso returns `vcf_url`: a time-limited link to a vCard (`.vcf`) for the\nchosen line, carrying its contact card (name/photo) with the chosen\nnumber as the primary `TEL` and the partner\'s other healthy lines as\nbackups. Share it with recipients so they can save the line as a contact.\n',
+        description: 'Returns the best available line (E.164) to send from, applying smart\nnumber assignment. Optionally pass `to` recipients to make the choice\n"sticky" — reusing the line an existing chat with those recipients is\nalready on. Without `to`, the best available line is chosen, always\npreferring lines with a healthier reputation.\n\nThis does not reserve the line. Without `to`, the least-recently-used\navailable line is returned — suggestions and your own sends (including\nan explicit `from` on chat creation) both count as use, so successive\ncalls cycle through your available lines and traffic spreads evenly.\nPass the returned `phone_number` as `from` when you create the chat to\nguarantee the same line.\n\nAlso returns `vcf_url`: a time-limited link to a vCard (`.vcf`) for the\nchosen line, carrying its contact card (name/photo) with the chosen\nnumber as the primary `TEL` and the partner\'s other available lines as\nbackups. Share it with recipients so they can save the line as a contact.\n',
         stainlessPath: '(resource) available_number > (method) retrieve',
         qualified: 'client.availableNumber.retrieve',
         params: ['to?: string[];'],
         response: '{ phone_number: string; vcf_url: string; }',
-        markdown: "## retrieve\n\n`client.availableNumber.retrieve(to?: string[]): { phone_number: string; vcf_url: string; }`\n\n**get** `/v3/available_number`\n\nReturns the best available line (E.164) to send from, applying smart\nnumber assignment. Optionally pass `to` recipients to make the choice\n\"sticky\" — reusing the line an existing chat with those recipients is\nalready on. Without `to`, the best healthy line is chosen.\n\nThis is advisory: it does not reserve the line or change selection state.\nPass the returned `phone_number` as `from` when you create the chat to\nguarantee the same line.\n\nAlso returns `vcf_url`: a time-limited link to a vCard (`.vcf`) for the\nchosen line, carrying its contact card (name/photo) with the chosen\nnumber as the primary `TEL` and the partner's other healthy lines as\nbackups. Share it with recipients so they can save the line as a contact.\n\n\n### Parameters\n\n- `to?: string[]`\n  Recipient handles (E.164 or email) the message is destined for. When\nprovided, an existing chat with these recipients makes the choice\nsticky. Repeat the parameter for multiple recipients.\n\n\n### Returns\n\n- `{ phone_number: string; vcf_url: string; }`\n  The line smart number assignment selected, plus a shareable vCard.\n\n  - `phone_number: string`\n  - `vcf_url: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst availableNumber = await client.availableNumber.retrieve();\n\nconsole.log(availableNumber);\n```",
+        markdown: "## retrieve\n\n`client.availableNumber.retrieve(to?: string[]): { phone_number: string; vcf_url: string; }`\n\n**get** `/v3/available_number`\n\nReturns the best available line (E.164) to send from, applying smart\nnumber assignment. Optionally pass `to` recipients to make the choice\n\"sticky\" — reusing the line an existing chat with those recipients is\nalready on. Without `to`, the best available line is chosen, always\npreferring lines with a healthier reputation.\n\nThis does not reserve the line. Without `to`, the least-recently-used\navailable line is returned — suggestions and your own sends (including\nan explicit `from` on chat creation) both count as use, so successive\ncalls cycle through your available lines and traffic spreads evenly.\nPass the returned `phone_number` as `from` when you create the chat to\nguarantee the same line.\n\nAlso returns `vcf_url`: a time-limited link to a vCard (`.vcf`) for the\nchosen line, carrying its contact card (name/photo) with the chosen\nnumber as the primary `TEL` and the partner's other available lines as\nbackups. Share it with recipients so they can save the line as a contact.\n\n\n### Parameters\n\n- `to?: string[]`\n  Recipient handles (E.164 or email) the message is destined for. When\nprovided, an existing chat with these recipients makes the choice\nsticky. Repeat the parameter for multiple recipients.\n\n\n### Returns\n\n- `{ phone_number: string; vcf_url: string; }`\n  The line smart number assignment selected, plus a shareable vCard.\n\n  - `phone_number: string`\n  - `vcf_url: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst availableNumber = await client.availableNumber.retrieve();\n\nconsole.log(availableNumber);\n```",
         perLanguage: {
             go: {
                 method: 'client.AvailableNumber.Get',
@@ -929,6 +929,141 @@ const EMBEDDED_METHODS = [
             },
         },
     },
+    {
+        name: 'create',
+        endpoint: '/v3/payment_requests',
+        httpMethod: 'post',
+        summary: 'Create a payment request',
+        description: "Creates a payment request and returns a `checkout_url` the recipient\nopens to pay with Apple Pay or card. Funds settle directly to your\nconnected Stripe account. A payment request is independent of any chat;\nto associate one with a chat for your records, store the chat id in\n`metadata`. Requires your connected account to be `charges_enabled`\n(returns `403` otherwise).\n\nSet `mode: subscription` with a recurring `price_id` from your connected\nStripe account to start an **auto-renewing subscription** instead of a\none-time charge — the recipient pays the first invoice at checkout and\nthe response's `stripe` object carries the customer and subscription ids\nfor the ongoing lifecycle in your own Stripe account. See the\n*Subscriptions* section of the tag overview.\n\nIn either mode, pass `customer_id` to attach the request to an\n**existing Customer** on your connected account instead of creating a\nnew one — see *Pre-created customers* in the tag overview.\n",
+        stainlessPath: '(resource) payment_requests > (method) create',
+        qualified: 'client.paymentRequests.create',
+        params: [
+            'amount?: number;',
+            'currency?: string;',
+            'customer_id?: string;',
+            'description?: string;',
+            'from?: string;',
+            'metadata?: object;',
+            "mode?: 'payment' | 'subscription';",
+            'payer_handle?: string;',
+            'price_id?: string;',
+            'quantity?: number;',
+            "rail?: 'stripe' | 'natural';",
+            'trial_end?: string;',
+            'trial_period_days?: number;',
+            'Idempotency-Key?: string;',
+        ],
+        response: "{ id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: { payment_request_id?: string; transaction_id?: string; }; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: { customer_id?: string; payment_intent_id?: string; subscription_id?: string; }; trial_end?: string; updated_at?: string; }",
+        markdown: "## create\n\n`client.paymentRequests.create(amount?: number, currency?: string, customer_id?: string, description?: string, from?: string, metadata?: object, mode?: 'payment' | 'subscription', payer_handle?: string, price_id?: string, quantity?: number, rail?: 'stripe' | 'natural', trial_end?: string, trial_period_days?: number, Idempotency-Key?: string): { id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: object; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: object; trial_end?: string; updated_at?: string; }`\n\n**post** `/v3/payment_requests`\n\nCreates a payment request and returns a `checkout_url` the recipient\nopens to pay with Apple Pay or card. Funds settle directly to your\nconnected Stripe account. A payment request is independent of any chat;\nto associate one with a chat for your records, store the chat id in\n`metadata`. Requires your connected account to be `charges_enabled`\n(returns `403` otherwise).\n\nSet `mode: subscription` with a recurring `price_id` from your connected\nStripe account to start an **auto-renewing subscription** instead of a\none-time charge — the recipient pays the first invoice at checkout and\nthe response's `stripe` object carries the customer and subscription ids\nfor the ongoing lifecycle in your own Stripe account. See the\n*Subscriptions* section of the tag overview.\n\nIn either mode, pass `customer_id` to attach the request to an\n**existing Customer** on your connected account instead of creating a\nnew one — see *Pre-created customers* in the tag overview.\n\n\n### Parameters\n\n- `amount?: number`\n  Amount to charge, in the currency's minor units (e.g. cents). Must be\nat least the payment provider's minimum (50 for `usd`). Required in\n`payment` mode; must be omitted in `subscription` mode (the amount\ncomes from the price).\n\n\n- `currency?: string`\n  Three-letter ISO 4217 currency code. Only `usd` is currently\nsupported. Required in `payment` mode; must be omitted in\n`subscription` mode (the currency comes from the price).\n\n\n- `customer_id?: string`\n  Optional id of an **existing Customer** on your connected Stripe\naccount (`cus_...`) to attach this request to, instead of a new\nCustomer being created. In `payment` mode the charge lands on that\ncustomer's payment history; in `subscription` mode the subscription\nis created on them. The customer must exist (and not be deleted) on\nyour connected account.\n\n\n- `description?: string`\n  Optional description shown to the recipient at checkout.\n\n- `from?: string`\n  Required for `rail: natural`. The line the request is sent from, in\nE.164 format. Must be a phone number your organization owns.\n\n\n- `metadata?: object`\n  Optional key/value metadata (up to 49 keys) echoed back on retrieval\nand on `payment.*` webhooks, and stamped on the Stripe objects we\ncreate on your connected account (the PaymentIntent, and in\nsubscription mode the Subscription and any Customer created for\nyou — a customer you pass via `customer_id` is never modified) —\nuse it to correlate a request with your own records (e.g. a chat\nid). Keys starting with `linq_` are reserved.\n\n\n- `mode?: 'payment' | 'subscription'`\n  `payment` (default) collects a one-time charge for `amount` +\n`currency`. `subscription` starts an auto-renewing subscription from\na recurring `price_id` on your connected Stripe account: the\nrecipient pays the first invoice at checkout and Stripe renews it\nautomatically from then on.\n\n\n- `payer_handle?: string`\n  Required for `rail: natural`. The payer to bill, in E.164 format.\n\n\n- `price_id?: string`\n  Subscription mode only (required there): id of an **active recurring\nPrice** on your connected Stripe account (`price_...`). If you sell\nthrough Stripe Payment Links today, pass the same price the link was\nbuilt from to get the native iMessage checkout for it.\n\n\n- `quantity?: number`\n  Subscription mode only — units of the price to subscribe to.\n\n- `rail?: 'stripe' | 'natural'`\n  Payment rail. `stripe` (default) is the direct-charge flow that\nsettles to your connected Stripe account. `natural` collects through\nthe Natural custodial wallet; it requires `from` + `payer_handle` and\nthat your organization has completed Natural merchant onboarding.\n\n\n- `trial_end?: string`\n  Subscription mode only — end the free trial at a fixed timestamp\n(must be in the future) instead of a day count. Mutually exclusive\nwith `trial_period_days`.\n\n\n- `trial_period_days?: number`\n  Subscription mode only — start with a free trial of this many days.\nThe recipient's card is still collected at checkout (Apple Pay or\ncard), saved to the subscription, and first charged when the trial\nends. Mutually exclusive with `trial_end`.\n\n\n- `Idempotency-Key?: string`\n\n### Returns\n\n- `{ id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: { payment_request_id?: string; transaction_id?: string; }; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: { customer_id?: string; payment_intent_id?: string; subscription_id?: string; }; trial_end?: string; updated_at?: string; }`\n\n  - `id: string`\n  - `amount: number`\n  - `checkout_url: string`\n  - `created_at: string`\n  - `currency: string`\n  - `mode: 'payment' | 'subscription'`\n  - `object: string`\n  - `status: 'requested' | 'succeeded' | 'canceled' | 'expired'`\n  - `description?: string`\n  - `expires_at?: string`\n  - `interval?: 'day' | 'week' | 'month' | 'year'`\n  - `interval_count?: number`\n  - `metadata?: object`\n  - `natural?: { payment_request_id?: string; transaction_id?: string; }`\n  - `paid_at?: string`\n  - `price_id?: string`\n  - `quantity?: number`\n  - `rail?: 'stripe' | 'natural'`\n  - `stripe?: { customer_id?: string; payment_intent_id?: string; subscription_id?: string; }`\n  - `trial_end?: string`\n  - `updated_at?: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst paymentRequest = await client.paymentRequests.create();\n\nconsole.log(paymentRequest);\n```",
+        perLanguage: {
+            go: {
+                method: 'client.PaymentRequests.New',
+                example: 'package main\n\nimport (\n\t"context"\n\t"fmt"\n\n\t"github.com/linq-team/linq-go"\n\t"github.com/linq-team/linq-go/option"\n)\n\nfunc main() {\n\tclient := linqgo.NewClient(\n\t\toption.WithAPIKey("My API Key"),\n\t)\n\tpaymentRequest, err := client.PaymentRequests.New(context.TODO(), linqgo.PaymentRequestNewParams{\n\t\tAmount:      linqgo.Int(497),\n\t\tCurrency:    linqgo.String("usd"),\n\t\tDescription: linqgo.String("Coffee with Ava"),\n\t\tMetadata: map[string]string{\n\t\t\t"order_id": "order_8675309",\n\t\t},\n\t})\n\tif err != nil {\n\t\tpanic(err.Error())\n\t}\n\tfmt.Printf("%+v\\n", paymentRequest.ID)\n}\n',
+            },
+            python: {
+                method: 'payment_requests.create',
+                example: 'import os\nfrom linq import LinqAPIV3\n\nclient = LinqAPIV3(\n    api_key=os.environ.get("LINQ_API_V3_API_KEY"),  # This is the default and can be omitted\n)\npayment_request = client.payment_requests.create(\n    amount=497,\n    currency="usd",\n    description="Coffee with Ava",\n    metadata={\n        "order_id": "order_8675309"\n    },\n)\nprint(payment_request.id)',
+            },
+            typescript: {
+                method: 'client.paymentRequests.create',
+                example: "import LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3({\n  apiKey: process.env['LINQ_API_V3_API_KEY'], // This is the default and can be omitted\n});\n\nconst paymentRequest = await client.paymentRequests.create({\n  amount: 497,\n  currency: 'usd',\n  description: 'Coffee with Ava',\n  metadata: { order_id: 'order_8675309' },\n});\n\nconsole.log(paymentRequest.id);",
+            },
+            http: {
+                example: 'curl https://api.linqapp.com/api/partner/v3/payment_requests \\\n    -H \'Content-Type: application/json\' \\\n    -H "Authorization: Bearer $LINQ_API_V3_API_KEY" \\\n    -d \'{\n          "amount": 497,\n          "currency": "usd",\n          "customer_id": "cus_QAbCdEfGhIjKlMn",\n          "description": "Coffee with Ava",\n          "from": "+12025550123",\n          "metadata": {\n            "order_id": "order_8675309"\n          },\n          "payer_handle": "+12025550199",\n          "price_id": "price_1QAbCdEfGhIjKlMn",\n          "trial_period_days": 14\n        }\'',
+            },
+        },
+    },
+    {
+        name: 'retrieve',
+        endpoint: '/v3/payment_requests/{paymentRequestId}',
+        httpMethod: 'get',
+        summary: 'Get a payment request',
+        description: "Returns a payment request's status and details.\n",
+        stainlessPath: '(resource) payment_requests > (method) retrieve',
+        qualified: 'client.paymentRequests.retrieve',
+        params: ['paymentRequestId: string;'],
+        response: "{ id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: { payment_request_id?: string; transaction_id?: string; }; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: { customer_id?: string; payment_intent_id?: string; subscription_id?: string; }; trial_end?: string; updated_at?: string; }",
+        markdown: "## retrieve\n\n`client.paymentRequests.retrieve(paymentRequestId: string): { id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: object; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: object; trial_end?: string; updated_at?: string; }`\n\n**get** `/v3/payment_requests/{paymentRequestId}`\n\nReturns a payment request's status and details.\n\n\n### Parameters\n\n- `paymentRequestId: string`\n\n### Returns\n\n- `{ id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: { payment_request_id?: string; transaction_id?: string; }; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: { customer_id?: string; payment_intent_id?: string; subscription_id?: string; }; trial_end?: string; updated_at?: string; }`\n\n  - `id: string`\n  - `amount: number`\n  - `checkout_url: string`\n  - `created_at: string`\n  - `currency: string`\n  - `mode: 'payment' | 'subscription'`\n  - `object: string`\n  - `status: 'requested' | 'succeeded' | 'canceled' | 'expired'`\n  - `description?: string`\n  - `expires_at?: string`\n  - `interval?: 'day' | 'week' | 'month' | 'year'`\n  - `interval_count?: number`\n  - `metadata?: object`\n  - `natural?: { payment_request_id?: string; transaction_id?: string; }`\n  - `paid_at?: string`\n  - `price_id?: string`\n  - `quantity?: number`\n  - `rail?: 'stripe' | 'natural'`\n  - `stripe?: { customer_id?: string; payment_intent_id?: string; subscription_id?: string; }`\n  - `trial_end?: string`\n  - `updated_at?: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst paymentRequest = await client.paymentRequests.retrieve('182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e');\n\nconsole.log(paymentRequest);\n```",
+        perLanguage: {
+            go: {
+                method: 'client.PaymentRequests.Get',
+                example: 'package main\n\nimport (\n\t"context"\n\t"fmt"\n\n\t"github.com/linq-team/linq-go"\n\t"github.com/linq-team/linq-go/option"\n)\n\nfunc main() {\n\tclient := linqgo.NewClient(\n\t\toption.WithAPIKey("My API Key"),\n\t)\n\tpaymentRequest, err := client.PaymentRequests.Get(context.TODO(), "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e")\n\tif err != nil {\n\t\tpanic(err.Error())\n\t}\n\tfmt.Printf("%+v\\n", paymentRequest.ID)\n}\n',
+            },
+            python: {
+                method: 'payment_requests.retrieve',
+                example: 'import os\nfrom linq import LinqAPIV3\n\nclient = LinqAPIV3(\n    api_key=os.environ.get("LINQ_API_V3_API_KEY"),  # This is the default and can be omitted\n)\npayment_request = client.payment_requests.retrieve(\n    "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",\n)\nprint(payment_request.id)',
+            },
+            typescript: {
+                method: 'client.paymentRequests.retrieve',
+                example: "import LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3({\n  apiKey: process.env['LINQ_API_V3_API_KEY'], // This is the default and can be omitted\n});\n\nconst paymentRequest = await client.paymentRequests.retrieve(\n  '182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e',\n);\n\nconsole.log(paymentRequest.id);",
+            },
+            http: {
+                example: 'curl https://api.linqapp.com/api/partner/v3/payment_requests/$PAYMENT_REQUEST_ID \\\n    -H "Authorization: Bearer $LINQ_API_V3_API_KEY"',
+            },
+        },
+    },
+    {
+        name: 'list',
+        endpoint: '/v3/payment_requests',
+        httpMethod: 'get',
+        summary: 'List payment requests',
+        description: 'Lists your payment requests, newest first, for reconciliation. Paginate\nwith `limit` + `offset`; `has_more` indicates whether another page exists.\n',
+        stainlessPath: '(resource) payment_requests > (method) list',
+        qualified: 'client.paymentRequests.list',
+        params: [
+            'limit?: number;',
+            'offset?: number;',
+            "status?: 'requested' | 'authorized' | 'succeeded' | 'canceled' | 'expired' | 'declined';",
+        ],
+        response: "{ data: { id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: object; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: object; trial_end?: string; updated_at?: string; }[]; has_more: boolean; object: 'list'; }",
+        markdown: "## list\n\n`client.paymentRequests.list(limit?: number, offset?: number, status?: 'requested' | 'authorized' | 'succeeded' | 'canceled' | 'expired' | 'declined'): { data: payment_request[]; has_more: boolean; object: 'list'; }`\n\n**get** `/v3/payment_requests`\n\nLists your payment requests, newest first, for reconciliation. Paginate\nwith `limit` + `offset`; `has_more` indicates whether another page exists.\n\n\n### Parameters\n\n- `limit?: number`\n  Max results to return (default 20, max 100).\n\n- `offset?: number`\n  Number of results to skip.\n\n- `status?: 'requested' | 'authorized' | 'succeeded' | 'canceled' | 'expired' | 'declined'`\n  Filter by lifecycle status.\n\n### Returns\n\n- `{ data: { id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: object; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: object; trial_end?: string; updated_at?: string; }[]; has_more: boolean; object: 'list'; }`\n\n  - `data: { id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: { payment_request_id?: string; transaction_id?: string; }; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: { customer_id?: string; payment_intent_id?: string; subscription_id?: string; }; trial_end?: string; updated_at?: string; }[]`\n  - `has_more: boolean`\n  - `object: 'list'`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst paymentRequests = await client.paymentRequests.list();\n\nconsole.log(paymentRequests);\n```",
+        perLanguage: {
+            go: {
+                method: 'client.PaymentRequests.List',
+                example: 'package main\n\nimport (\n\t"context"\n\t"fmt"\n\n\t"github.com/linq-team/linq-go"\n\t"github.com/linq-team/linq-go/option"\n)\n\nfunc main() {\n\tclient := linqgo.NewClient(\n\t\toption.WithAPIKey("My API Key"),\n\t)\n\tpaymentRequests, err := client.PaymentRequests.List(context.TODO(), linqgo.PaymentRequestListParams{})\n\tif err != nil {\n\t\tpanic(err.Error())\n\t}\n\tfmt.Printf("%+v\\n", paymentRequests.Data)\n}\n',
+            },
+            python: {
+                method: 'payment_requests.list',
+                example: 'import os\nfrom linq import LinqAPIV3\n\nclient = LinqAPIV3(\n    api_key=os.environ.get("LINQ_API_V3_API_KEY"),  # This is the default and can be omitted\n)\npayment_requests = client.payment_requests.list()\nprint(payment_requests.data)',
+            },
+            typescript: {
+                method: 'client.paymentRequests.list',
+                example: "import LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3({\n  apiKey: process.env['LINQ_API_V3_API_KEY'], // This is the default and can be omitted\n});\n\nconst paymentRequests = await client.paymentRequests.list();\n\nconsole.log(paymentRequests.data);",
+            },
+            http: {
+                example: 'curl https://api.linqapp.com/api/partner/v3/payment_requests \\\n    -H "Authorization: Bearer $LINQ_API_V3_API_KEY"',
+            },
+        },
+    },
+    {
+        name: 'cancel',
+        endpoint: '/v3/payment_requests/{paymentRequestId}/cancel',
+        httpMethod: 'post',
+        summary: 'Cancel a payment request',
+        description: 'Cancels an unpaid payment request: the underlying payment intent is\ncanceled and the request moves to `canceled`. A request that is already\npaid, canceled, or expired returns 409.\n',
+        stainlessPath: '(resource) payment_requests > (method) cancel',
+        qualified: 'client.paymentRequests.cancel',
+        params: ['paymentRequestId: string;'],
+        response: "{ id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: { payment_request_id?: string; transaction_id?: string; }; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: { customer_id?: string; payment_intent_id?: string; subscription_id?: string; }; trial_end?: string; updated_at?: string; }",
+        markdown: "## cancel\n\n`client.paymentRequests.cancel(paymentRequestId: string): { id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: object; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: object; trial_end?: string; updated_at?: string; }`\n\n**post** `/v3/payment_requests/{paymentRequestId}/cancel`\n\nCancels an unpaid payment request: the underlying payment intent is\ncanceled and the request moves to `canceled`. A request that is already\npaid, canceled, or expired returns 409.\n\n\n### Parameters\n\n- `paymentRequestId: string`\n\n### Returns\n\n- `{ id: string; amount: number; checkout_url: string; created_at: string; currency: string; mode: 'payment' | 'subscription'; object: string; status: 'requested' | 'succeeded' | 'canceled' | 'expired'; description?: string; expires_at?: string; interval?: 'day' | 'week' | 'month' | 'year'; interval_count?: number; metadata?: object; natural?: { payment_request_id?: string; transaction_id?: string; }; paid_at?: string; price_id?: string; quantity?: number; rail?: 'stripe' | 'natural'; stripe?: { customer_id?: string; payment_intent_id?: string; subscription_id?: string; }; trial_end?: string; updated_at?: string; }`\n\n  - `id: string`\n  - `amount: number`\n  - `checkout_url: string`\n  - `created_at: string`\n  - `currency: string`\n  - `mode: 'payment' | 'subscription'`\n  - `object: string`\n  - `status: 'requested' | 'succeeded' | 'canceled' | 'expired'`\n  - `description?: string`\n  - `expires_at?: string`\n  - `interval?: 'day' | 'week' | 'month' | 'year'`\n  - `interval_count?: number`\n  - `metadata?: object`\n  - `natural?: { payment_request_id?: string; transaction_id?: string; }`\n  - `paid_at?: string`\n  - `price_id?: string`\n  - `quantity?: number`\n  - `rail?: 'stripe' | 'natural'`\n  - `stripe?: { customer_id?: string; payment_intent_id?: string; subscription_id?: string; }`\n  - `trial_end?: string`\n  - `updated_at?: string`\n\n### Example\n\n```typescript\nimport LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3();\n\nconst paymentRequest = await client.paymentRequests.cancel('182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e');\n\nconsole.log(paymentRequest);\n```",
+        perLanguage: {
+            go: {
+                method: 'client.PaymentRequests.Cancel',
+                example: 'package main\n\nimport (\n\t"context"\n\t"fmt"\n\n\t"github.com/linq-team/linq-go"\n\t"github.com/linq-team/linq-go/option"\n)\n\nfunc main() {\n\tclient := linqgo.NewClient(\n\t\toption.WithAPIKey("My API Key"),\n\t)\n\tpaymentRequest, err := client.PaymentRequests.Cancel(context.TODO(), "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e")\n\tif err != nil {\n\t\tpanic(err.Error())\n\t}\n\tfmt.Printf("%+v\\n", paymentRequest.ID)\n}\n',
+            },
+            python: {
+                method: 'payment_requests.cancel',
+                example: 'import os\nfrom linq import LinqAPIV3\n\nclient = LinqAPIV3(\n    api_key=os.environ.get("LINQ_API_V3_API_KEY"),  # This is the default and can be omitted\n)\npayment_request = client.payment_requests.cancel(\n    "182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e",\n)\nprint(payment_request.id)',
+            },
+            typescript: {
+                method: 'client.paymentRequests.cancel',
+                example: "import LinqAPIV3 from '@linqapp/sdk';\n\nconst client = new LinqAPIV3({\n  apiKey: process.env['LINQ_API_V3_API_KEY'], // This is the default and can be omitted\n});\n\nconst paymentRequest = await client.paymentRequests.cancel('182bd5e5-6e1a-4fe4-a799-aa6d9a6ab26e');\n\nconsole.log(paymentRequest.id);",
+            },
+            http: {
+                example: 'curl https://api.linqapp.com/api/partner/v3/payment_requests/$PAYMENT_REQUEST_ID/cancel \\\n    -X POST \\\n    -H "Authorization: Bearer $LINQ_API_V3_API_KEY"',
+            },
+        },
+    },
     {
         name: 'list',
         endpoint: '/v3/webhook-events',
@@ -1278,7 +1413,7 @@ const EMBEDDED_METHODS = [
 const EMBEDDED_READMES = [
     {
         language: 'go',
-        content: '# Linq API V3 Go API Library\n\n<a href="https://pkg.go.dev/github.com/linq-team/linq-go"><img src="https://pkg.go.dev/badge/github.com/linq-team/linq-go.svg" alt="Go Reference"></a>\n\nThe Linq API V3 Go library provides convenient access to the [Linq API V3 REST API](https://docs.linqapp.com)\nfrom applications written in Go.\n\nIt is generated with [Stainless](https://www.stainless.com/).\n\n## MCP Server\n\nUse the Linq API V3 MCP Server to enable AI assistants to interact with this API, allowing them to explore endpoints, make test requests, and use documentation to help integrate this SDK into your application.\n\n[![Add to Cursor](https://cursor.com/deeplink/mcp-install-dark.svg)](https://cursor.com/en-US/install-mcp?name=%40linqapp%2Fsdk-mcp&config=eyJjb21tYW5kIjoibnB4IiwiYXJncyI6WyIteSIsIkBsaW5xYXBwL3Nkay1tY3AiXSwiZW52Ijp7IkxJTlFfQVBJX1YzX0FQSV9LRVkiOiJNeSBBUEkgS2V5IiwiTElOUV9XRUJIT09LX1NFQ1JFVCI6Ik15IFdlYmhvb2sgU2VjcmV0In19)\n[![Install in VS Code](https://img.shields.io/badge/_-Add_to_VS_Code-blue?style=for-the-badge&logo=data:image/svg%2bxml;base64,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)](https://vscode.stainless.com/mcp/%7B%22name%22%3A%22%40linqapp%2Fsdk-mcp%22%2C%22command%22%3A%22npx%22%2C%22args%22%3A%5B%22-y%22%2C%22%40linqapp%2Fsdk-mcp%22%5D%2C%22env%22%3A%7B%22LINQ_API_V3_API_KEY%22%3A%22My%20API%20Key%22%2C%22LINQ_WEBHOOK_SECRET%22%3A%22My%20Webhook%20Secret%22%7D%7D)\n\n> Note: You may need to set environment variables in your MCP client.\n\n## Installation\n\n<!-- x-release-please-start-version -->\n\n```go\nimport (\n\t"github.com/linq-team/linq-go" // imported as SDK_PackageName\n)\n```\n\n<!-- x-release-please-end -->\n\nOr to pin the version:\n\n<!-- x-release-please-start-version -->\n\n```sh\ngo get -u \'github.com/linq-team/linq-go@v0.26.0\'\n```\n\n<!-- x-release-please-end -->\n\n## Requirements\n\nThis library requires Go 1.22+.\n\n## Usage\n\nThe full API of this library can be found in [api.md](api.md).\n\n```go\npackage main\n\nimport (\n\t"context"\n\t"fmt"\n\n\t"github.com/linq-team/linq-go"\n\t"github.com/linq-team/linq-go/option"\n)\n\nfunc main() {\n\tclient := linqgo.NewClient(\n\t\toption.WithAPIKey("My API Key"), // defaults to os.LookupEnv("LINQ_API_V3_API_KEY")\n\t)\n\tchat, err := client.Chats.New(context.TODO(), linqgo.ChatNewParams{\n\t\tFrom: "+12052535597",\n\t\tMessage: linqgo.MessageContentParam{\n\t\t\tParts: []linqgo.MessageContentPartUnionParam{{\n\t\t\t\tOfText: &linqgo.TextPartParam{\n\t\t\t\t\tType:  linqgo.TextPartTypeText,\n\t\t\t\t\tValue: "Hello! How can I help you today?",\n\t\t\t\t},\n\t\t\t}},\n\t\t},\n\t\tTo: []string{"+12052532136"},\n\t})\n\tif err != nil {\n\t\tpanic(err.Error())\n\t}\n\tfmt.Printf("%+v\\n", chat.Chat)\n}\n\n```\n\n### Request fields\n\nAll request parameters are wrapped in a generic `Field` type,\nwhich we use to distinguish zero values from null or omitted fields.\n\nThis prevents accidentally sending a zero value if you forget a required parameter,\nand enables explicitly sending `null`, `false`, `\'\'`, or `0` on optional parameters.\nAny field not specified is not sent.\n\nTo construct fields with values, use the helpers `String()`, `Int()`, `Float()`, or most commonly, the generic `F[T]()`.\nTo send a null, use `Null[T]()`, and to send a nonconforming value, use `Raw[T](any)`. For example:\n\n```go\nparams := FooParams{\n\tName: SDK_PackageName.F("hello"),\n\n\t// Explicitly send `"description": null`\n\tDescription: SDK_PackageName.Null[string](),\n\n\tPoint: SDK_PackageName.F(SDK_PackageName.Point{\n\t\tX: SDK_PackageName.Int(0),\n\t\tY: SDK_PackageName.Int(1),\n\n\t\t// In cases where the API specifies a given type,\n\t\t// but you want to send something else, use `Raw`:\n\t\tZ: SDK_PackageName.Raw[int64](0.01), // sends a float\n\t}),\n}\n```\n\n### Response objects\n\nAll fields in response structs are value types (not pointers or wrappers).\n\nIf a given field is `null`, not present, or invalid, the corresponding field\nwill simply be its zero value.\n\nAll response structs also include a special `JSON` field, containing more detailed\ninformation about each property, which you can use like so:\n\n```go\nif res.Name == "" {\n\t// true if `"name"` is either not present or explicitly null\n\tres.JSON.Name.IsNull()\n\n\t// true if the `"name"` key was not present in the response JSON at all\n\tres.JSON.Name.IsMissing()\n\n\t// When the API returns data that cannot be coerced to the expected type:\n\tif res.JSON.Name.IsInvalid() {\n\t\traw := res.JSON.Name.Raw()\n\n\t\tlegacyName := struct{\n\t\t\tFirst string `json:"first"`\n\t\t\tLast  string `json:"last"`\n\t\t}{}\n\t\tjson.Unmarshal([]byte(raw), &legacyName)\n\t\tname = legacyName.First + " " + legacyName.Last\n\t}\n}\n```\n\nThese `.JSON` structs also include an `Extras` map containing\nany properties in the json response that were not specified\nin the struct. This can be useful for API features not yet\npresent in the SDK.\n\n```go\nbody := res.JSON.ExtraFields["my_unexpected_field"].Raw()\n```\n\n### RequestOptions\n\nThis library uses the functional options pattern. Functions defined in the\n`SDK_PackageOptionName` package return a `RequestOption`, which is a closure that mutates a\n`RequestConfig`. These options can be supplied to the client or at individual\nrequests. For example:\n\n```go\nclient := SDK_PackageName.SDK_ClientInitializerName(\n\t// Adds a header to every request made by the client\n\tSDK_PackageOptionName.WithHeader("X-Some-Header", "custom_header_info"),\n)\n\nclient.Chats.New(context.TODO(), ...,\n\t// Override the header\n\tSDK_PackageOptionName.WithHeader("X-Some-Header", "some_other_custom_header_info"),\n\t// Add an undocumented field to the request body, using sjson syntax\n\tSDK_PackageOptionName.WithJSONSet("some.json.path", map[string]string{"my": "object"}),\n)\n```\n\nSee the [full list of request options](https://pkg.go.dev/github.com/linq-team/linq-go/SDK_PackageOptionName).\n\n### Pagination\n\nThis library provides some conveniences for working with paginated list endpoints.\n\nYou can use `.ListAutoPaging()` methods to iterate through items across all pages:\n\n```go\niter := client.Chats.ListChatsAutoPaging(context.TODO(), linqgo.ChatListChatsParams{})\n// Automatically fetches more pages as needed.\nfor iter.Next() {\n\tchat := iter.Current()\n\tfmt.Printf("%+v\\n", chat)\n}\nif err := iter.Err(); err != nil {\n\tpanic(err.Error())\n}\n```\n\nOr you can use simple `.List()` methods to fetch a single page and receive a standard response object\nwith additional helper methods like `.GetNextPage()`, e.g.:\n\n```go\npage, err := client.Chats.ListChats(context.TODO(), linqgo.ChatListChatsParams{})\nfor page != nil {\n\tfor _, chat := range page.Chats {\n\t\tfmt.Printf("%+v\\n", chat)\n\t}\n\tpage, err = page.GetNextPage()\n}\nif err != nil {\n\tpanic(err.Error())\n}\n```\n\n### Errors\n\nWhen the API returns a non-success status code, we return an error with type\n`*SDK_PackageName.Error`. This contains the `StatusCode`, `*http.Request`, and\n`*http.Response` values of the request, as well as the JSON of the error body\n(much like other response objects in the SDK).\n\nTo handle errors, we recommend that you use the `errors.As` pattern:\n\n```go\n_, err := client.Chats.New(context.TODO(), linqgo.ChatNewParams{\n\tFrom: "+12052535597",\n\tMessage: linqgo.MessageContentParam{\n\t\tParts: []linqgo.MessageContentPartUnionParam{{\n\t\t\tOfText: &linqgo.TextPartParam{\n\t\t\t\tType:  linqgo.TextPartTypeText,\n\t\t\t\tValue: "Hello! How can I help you today?",\n\t\t\t},\n\t\t}},\n\t},\n\tTo: []string{"+12052532136"},\n})\nif err != nil {\n\tvar apierr *linqgo.Error\n\tif errors.As(err, &apierr) {\n\t\tprintln(string(apierr.DumpRequest(true)))  // Prints the serialized HTTP request\n\t\tprintln(string(apierr.DumpResponse(true))) // Prints the serialized HTTP response\n\t}\n\tpanic(err.Error()) // GET "/v3/chats": 400 Bad Request { ... }\n}\n```\n\nWhen other errors occur, they are returned unwrapped; for example,\nif HTTP transport fails, you might receive `*url.Error` wrapping `*net.OpError`.\n\n### Timeouts\n\nRequests do not time out by default; use context to configure a timeout for a request lifecycle.\n\nNote that if a request is [retried](#retries), the context timeout does not start over.\nTo set a per-retry timeout, use `SDK_PackageOptionName.WithRequestTimeout()`.\n\n```go\n// This sets the timeout for the request, including all the retries.\nctx, cancel := context.WithTimeout(context.Background(), 5*time.Minute)\ndefer cancel()\nclient.Chats.New(\n\tctx,\n\tlinqgo.ChatNewParams{\n\t\tFrom: "+12052535597",\n\t\tMessage: linqgo.MessageContentParam{\n\t\t\tParts: []linqgo.MessageContentPartUnionParam{{\n\t\t\t\tOfText: &linqgo.TextPartParam{\n\t\t\t\t\tType:  linqgo.TextPartTypeText,\n\t\t\t\t\tValue: "Hello! How can I help you today?",\n\t\t\t\t},\n\t\t\t}},\n\t\t},\n\t\tTo: []string{"+12052532136"},\n\t},\n\t// This sets the per-retry timeout\n\toption.WithRequestTimeout(20*time.Second),\n)\n```\n\n### File uploads\n\nRequest parameters that correspond to file uploads in multipart requests are typed as\n`param.Field[io.Reader]`. The contents of the `io.Reader` will by default be sent as a multipart form\npart with the file name of "anonymous_file" and content-type of "application/octet-stream".\n\nThe file name and content-type can be customized by implementing `Name() string` or `ContentType()\nstring` on the run-time type of `io.Reader`. Note that `os.File` implements `Name() string`, so a\nfile returned by `os.Open` will be sent with the file name on disk.\n\nWe also provide a helper `SDK_PackageName.FileParam(reader io.Reader, filename string, contentType string)`\nwhich can be used to wrap any `io.Reader` with the appropriate file name and content type.\n\n\n\n### Retries\n\nCertain errors will be automatically retried 2 times by default, with a short exponential backoff.\nWe retry by default all connection errors, 408 Request Timeout, 409 Conflict, 429 Rate Limit,\nand >=500 Internal errors.\n\nYou can use the `WithMaxRetries` option to configure or disable this:\n\n```go\n// Configure the default for all requests:\nclient := linqgo.NewClient(\n\toption.WithMaxRetries(0), // default is 2\n)\n\n// Override per-request:\nclient.Chats.New(\n\tcontext.TODO(),\n\tlinqgo.ChatNewParams{\n\t\tFrom: "+12052535597",\n\t\tMessage: linqgo.MessageContentParam{\n\t\t\tParts: []linqgo.MessageContentPartUnionParam{{\n\t\t\t\tOfText: &linqgo.TextPartParam{\n\t\t\t\t\tType:  linqgo.TextPartTypeText,\n\t\t\t\t\tValue: "Hello! How can I help you today?",\n\t\t\t\t},\n\t\t\t}},\n\t\t},\n\t\tTo: []string{"+12052532136"},\n\t},\n\toption.WithMaxRetries(5),\n)\n```\n\n\n### Accessing raw response data (e.g. response headers)\n\nYou can access the raw HTTP response data by using the `option.WithResponseInto()` request option. This is useful when\nyou need to examine response headers, status codes, or other details.\n\n```go\n// Create a variable to store the HTTP response\nvar response *http.Response\nchat, err := client.Chats.New(\n\tcontext.TODO(),\n\tlinqgo.ChatNewParams{\n\t\tFrom: "+12052535597",\n\t\tMessage: linqgo.MessageContentParam{\n\t\t\tParts: []linqgo.MessageContentPartUnionParam{{\n\t\t\t\tOfText: &linqgo.TextPartParam{\n\t\t\t\t\tType:  linqgo.TextPartTypeText,\n\t\t\t\t\tValue: "Hello! How can I help you today?",\n\t\t\t\t},\n\t\t\t}},\n\t\t},\n\t\tTo: []string{"+12052532136"},\n\t},\n\toption.WithResponseInto(&response),\n)\nif err != nil {\n\t// handle error\n}\nfmt.Printf("%+v\\n", chat)\n\nfmt.Printf("Status Code: %d\\n", response.StatusCode)\nfmt.Printf("Headers: %+#v\\n", response.Header)\n```\n\n### Making custom/undocumented requests\n\nThis library is typed for convenient access to the documented API. If you need to access undocumented\nendpoints, params, or response properties, the library can still be used.\n\n#### Undocumented endpoints\n\nTo make requests to undocumented endpoints, you can use `client.Get`, `client.Post`, and other HTTP verbs.\n`RequestOptions` on the client, such as retries, will be respected when making these requests.\n\n```go\nvar (\n    // params can be an io.Reader, a []byte, an encoding/json serializable object,\n    // or a "…Params" struct defined in this library.\n    params map[string]interface{}\n\n    // result can be an []byte, *http.Response, a encoding/json deserializable object,\n    // or a model defined in this library.\n    result *http.Response\n)\nerr := client.Post(context.Background(), "/unspecified", params, &result)\nif err != nil {\n    …\n}\n```\n\n#### Undocumented request params\n\nTo make requests using undocumented parameters, you may use either the `SDK_PackageOptionName.WithQuerySet()`\nor the `SDK_PackageOptionName.WithJSONSet()` methods.\n\n```go\nparams := FooNewParams{\n    ID:   SDK_PackageName.F("id_xxxx"),\n    Data: SDK_PackageName.F(FooNewParamsData{\n        FirstName: SDK_PackageName.F("John"),\n    }),\n}\nclient.Foo.New(context.Background(), params, SDK_PackageOptionName.WithJSONSet("data.last_name", "Doe"))\n```\n\n#### Undocumented response properties\n\nTo access undocumented response properties, you may either access the raw JSON of the response as a string\nwith `result.JSON.RawJSON()`, or get the raw JSON of a particular field on the result with\n`result.JSON.Foo.Raw()`.\n\nAny fields that are not present on the response struct will be saved and can be accessed by `result.JSON.ExtraFields()` which returns the extra fields as a `map[string]Field`.\n\n### Middleware\n\nWe provide `SDK_PackageOptionName.WithMiddleware` which applies the given\nmiddleware to requests.\n\n```go\nfunc Logger(req *http.Request, next SDK_PackageOptionName.MiddlewareNext) (res *http.Response, err error) {\n\t// Before the request\n\tstart := time.Now()\n\tLogReq(req)\n\n\t// Forward the request to the next handler\n\tres, err = next(req)\n\n\t// Handle stuff after the request\n\tend := time.Now()\n\tLogRes(res, err, start - end)\n\n    return res, err\n}\n\nclient := SDK_PackageName.SDK_ClientInitializerName(\n\tSDK_PackageOptionName.WithMiddleware(Logger),\n)\n```\n\nWhen multiple middlewares are provided as variadic arguments, the middlewares\nare applied left to right. If `SDK_PackageOptionName.WithMiddleware` is given\nmultiple times, for example first in the client then the method, the\nmiddleware in the client will run first and the middleware given in the method\nwill run next.\n\nYou may also replace the default `http.Client` with\n`SDK_PackageOptionName.WithHTTPClient(client)`. Only one http client is\naccepted (this overwrites any previous client) and receives requests after any\nmiddleware has been applied.\n\n## Semantic versioning\n\nThis package generally follows [SemVer](https://semver.org/spec/v2.0.0.html) conventions, though certain backwards-incompatible changes may be released as minor versions:\n\n1. Changes to library internals which are technically public but not intended or documented for external use. _(Please open a GitHub issue to let us know if you are relying on such internals.)_\n2. Changes that we do not expect to impact the vast majority of users in practice.\n\nWe take backwards-compatibility seriously and work hard to ensure you can rely on a smooth upgrade experience.\n\nWe are keen for your feedback; please open an [issue](https://www.github.com/linq-team/linq-go/issues) with questions, bugs, or suggestions.\n\n## Contributing\n\nSee [the contributing documentation](./CONTRIBUTING.md).\n',
+        content: '# Linq API V3 Go API Library\n\n<a href="https://pkg.go.dev/github.com/linq-team/linq-go"><img src="https://pkg.go.dev/badge/github.com/linq-team/linq-go.svg" alt="Go Reference"></a>\n\nThe Linq API V3 Go library provides convenient access to the [Linq API V3 REST API](https://docs.linqapp.com)\nfrom applications written in Go.\n\nIt is generated with [Stainless](https://www.stainless.com/).\n\n## MCP Server\n\nUse the Linq API V3 MCP Server to enable AI assistants to interact with this API, allowing them to explore endpoints, make test requests, and use documentation to help integrate this SDK into your application.\n\n[![Add to Cursor](https://cursor.com/deeplink/mcp-install-dark.svg)](https://cursor.com/en-US/install-mcp?name=%40linqapp%2Fsdk-mcp&config=eyJjb21tYW5kIjoibnB4IiwiYXJncyI6WyIteSIsIkBsaW5xYXBwL3Nkay1tY3AiXSwiZW52Ijp7IkxJTlFfQVBJX1YzX0FQSV9LRVkiOiJNeSBBUEkgS2V5IiwiTElOUV9XRUJIT09LX1NFQ1JFVCI6Ik15IFdlYmhvb2sgU2VjcmV0In19)\n[![Install in VS Code](https://img.shields.io/badge/_-Add_to_VS_Code-blue?style=for-the-badge&logo=data:image/svg%2bxml;base64,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)](https://vscode.stainless.com/mcp/%7B%22name%22%3A%22%40linqapp%2Fsdk-mcp%22%2C%22command%22%3A%22npx%22%2C%22args%22%3A%5B%22-y%22%2C%22%40linqapp%2Fsdk-mcp%22%5D%2C%22env%22%3A%7B%22LINQ_API_V3_API_KEY%22%3A%22My%20API%20Key%22%2C%22LINQ_WEBHOOK_SECRET%22%3A%22My%20Webhook%20Secret%22%7D%7D)\n\n> Note: You may need to set environment variables in your MCP client.\n\n## Installation\n\n<!-- x-release-please-start-version -->\n\n```go\nimport (\n\t"github.com/linq-team/linq-go" // imported as SDK_PackageName\n)\n```\n\n<!-- x-release-please-end -->\n\nOr to pin the version:\n\n<!-- x-release-please-start-version -->\n\n```sh\ngo get -u \'github.com/linq-team/linq-go@v0.26.1\'\n```\n\n<!-- x-release-please-end -->\n\n## Requirements\n\nThis library requires Go 1.22+.\n\n## Usage\n\nThe full API of this library can be found in [api.md](api.md).\n\n```go\npackage main\n\nimport (\n\t"context"\n\t"fmt"\n\n\t"github.com/linq-team/linq-go"\n\t"github.com/linq-team/linq-go/option"\n)\n\nfunc main() {\n\tclient := linqgo.NewClient(\n\t\toption.WithAPIKey("My API Key"), // defaults to os.LookupEnv("LINQ_API_V3_API_KEY")\n\t)\n\tchat, err := client.Chats.New(context.TODO(), linqgo.ChatNewParams{\n\t\tFrom: "+12052535597",\n\t\tMessage: linqgo.MessageContentParam{\n\t\t\tParts: []linqgo.MessageContentPartUnionParam{{\n\t\t\t\tOfText: &linqgo.TextPartParam{\n\t\t\t\t\tType:  linqgo.TextPartTypeText,\n\t\t\t\t\tValue: "Hello! How can I help you today?",\n\t\t\t\t},\n\t\t\t}},\n\t\t},\n\t\tTo: []string{"+12052532136"},\n\t})\n\tif err != nil {\n\t\tpanic(err.Error())\n\t}\n\tfmt.Printf("%+v\\n", chat.Chat)\n}\n\n```\n\n### Request fields\n\nAll request parameters are wrapped in a generic `Field` type,\nwhich we use to distinguish zero values from null or omitted fields.\n\nThis prevents accidentally sending a zero value if you forget a required parameter,\nand enables explicitly sending `null`, `false`, `\'\'`, or `0` on optional parameters.\nAny field not specified is not sent.\n\nTo construct fields with values, use the helpers `String()`, `Int()`, `Float()`, or most commonly, the generic `F[T]()`.\nTo send a null, use `Null[T]()`, and to send a nonconforming value, use `Raw[T](any)`. For example:\n\n```go\nparams := FooParams{\n\tName: SDK_PackageName.F("hello"),\n\n\t// Explicitly send `"description": null`\n\tDescription: SDK_PackageName.Null[string](),\n\n\tPoint: SDK_PackageName.F(SDK_PackageName.Point{\n\t\tX: SDK_PackageName.Int(0),\n\t\tY: SDK_PackageName.Int(1),\n\n\t\t// In cases where the API specifies a given type,\n\t\t// but you want to send something else, use `Raw`:\n\t\tZ: SDK_PackageName.Raw[int64](0.01), // sends a float\n\t}),\n}\n```\n\n### Response objects\n\nAll fields in response structs are value types (not pointers or wrappers).\n\nIf a given field is `null`, not present, or invalid, the corresponding field\nwill simply be its zero value.\n\nAll response structs also include a special `JSON` field, containing more detailed\ninformation about each property, which you can use like so:\n\n```go\nif res.Name == "" {\n\t// true if `"name"` is either not present or explicitly null\n\tres.JSON.Name.IsNull()\n\n\t// true if the `"name"` key was not present in the response JSON at all\n\tres.JSON.Name.IsMissing()\n\n\t// When the API returns data that cannot be coerced to the expected type:\n\tif res.JSON.Name.IsInvalid() {\n\t\traw := res.JSON.Name.Raw()\n\n\t\tlegacyName := struct{\n\t\t\tFirst string `json:"first"`\n\t\t\tLast  string `json:"last"`\n\t\t}{}\n\t\tjson.Unmarshal([]byte(raw), &legacyName)\n\t\tname = legacyName.First + " " + legacyName.Last\n\t}\n}\n```\n\nThese `.JSON` structs also include an `Extras` map containing\nany properties in the json response that were not specified\nin the struct. This can be useful for API features not yet\npresent in the SDK.\n\n```go\nbody := res.JSON.ExtraFields["my_unexpected_field"].Raw()\n```\n\n### RequestOptions\n\nThis library uses the functional options pattern. Functions defined in the\n`SDK_PackageOptionName` package return a `RequestOption`, which is a closure that mutates a\n`RequestConfig`. These options can be supplied to the client or at individual\nrequests. For example:\n\n```go\nclient := SDK_PackageName.SDK_ClientInitializerName(\n\t// Adds a header to every request made by the client\n\tSDK_PackageOptionName.WithHeader("X-Some-Header", "custom_header_info"),\n)\n\nclient.Chats.New(context.TODO(), ...,\n\t// Override the header\n\tSDK_PackageOptionName.WithHeader("X-Some-Header", "some_other_custom_header_info"),\n\t// Add an undocumented field to the request body, using sjson syntax\n\tSDK_PackageOptionName.WithJSONSet("some.json.path", map[string]string{"my": "object"}),\n)\n```\n\nSee the [full list of request options](https://pkg.go.dev/github.com/linq-team/linq-go/SDK_PackageOptionName).\n\n### Pagination\n\nThis library provides some conveniences for working with paginated list endpoints.\n\nYou can use `.ListAutoPaging()` methods to iterate through items across all pages:\n\n```go\niter := client.Chats.ListChatsAutoPaging(context.TODO(), linqgo.ChatListChatsParams{})\n// Automatically fetches more pages as needed.\nfor iter.Next() {\n\tchat := iter.Current()\n\tfmt.Printf("%+v\\n", chat)\n}\nif err := iter.Err(); err != nil {\n\tpanic(err.Error())\n}\n```\n\nOr you can use simple `.List()` methods to fetch a single page and receive a standard response object\nwith additional helper methods like `.GetNextPage()`, e.g.:\n\n```go\npage, err := client.Chats.ListChats(context.TODO(), linqgo.ChatListChatsParams{})\nfor page != nil {\n\tfor _, chat := range page.Chats {\n\t\tfmt.Printf("%+v\\n", chat)\n\t}\n\tpage, err = page.GetNextPage()\n}\nif err != nil {\n\tpanic(err.Error())\n}\n```\n\n### Errors\n\nWhen the API returns a non-success status code, we return an error with type\n`*SDK_PackageName.Error`. This contains the `StatusCode`, `*http.Request`, and\n`*http.Response` values of the request, as well as the JSON of the error body\n(much like other response objects in the SDK).\n\nTo handle errors, we recommend that you use the `errors.As` pattern:\n\n```go\n_, err := client.Chats.New(context.TODO(), linqgo.ChatNewParams{\n\tFrom: "+12052535597",\n\tMessage: linqgo.MessageContentParam{\n\t\tParts: []linqgo.MessageContentPartUnionParam{{\n\t\t\tOfText: &linqgo.TextPartParam{\n\t\t\t\tType:  linqgo.TextPartTypeText,\n\t\t\t\tValue: "Hello! How can I help you today?",\n\t\t\t},\n\t\t}},\n\t},\n\tTo: []string{"+12052532136"},\n})\nif err != nil {\n\tvar apierr *linqgo.Error\n\tif errors.As(err, &apierr) {\n\t\tprintln(string(apierr.DumpRequest(true)))  // Prints the serialized HTTP request\n\t\tprintln(string(apierr.DumpResponse(true))) // Prints the serialized HTTP response\n\t}\n\tpanic(err.Error()) // GET "/v3/chats": 400 Bad Request { ... }\n}\n```\n\nWhen other errors occur, they are returned unwrapped; for example,\nif HTTP transport fails, you might receive `*url.Error` wrapping `*net.OpError`.\n\n### Timeouts\n\nRequests do not time out by default; use context to configure a timeout for a request lifecycle.\n\nNote that if a request is [retried](#retries), the context timeout does not start over.\nTo set a per-retry timeout, use `SDK_PackageOptionName.WithRequestTimeout()`.\n\n```go\n// This sets the timeout for the request, including all the retries.\nctx, cancel := context.WithTimeout(context.Background(), 5*time.Minute)\ndefer cancel()\nclient.Chats.New(\n\tctx,\n\tlinqgo.ChatNewParams{\n\t\tFrom: "+12052535597",\n\t\tMessage: linqgo.MessageContentParam{\n\t\t\tParts: []linqgo.MessageContentPartUnionParam{{\n\t\t\t\tOfText: &linqgo.TextPartParam{\n\t\t\t\t\tType:  linqgo.TextPartTypeText,\n\t\t\t\t\tValue: "Hello! How can I help you today?",\n\t\t\t\t},\n\t\t\t}},\n\t\t},\n\t\tTo: []string{"+12052532136"},\n\t},\n\t// This sets the per-retry timeout\n\toption.WithRequestTimeout(20*time.Second),\n)\n```\n\n### File uploads\n\nRequest parameters that correspond to file uploads in multipart requests are typed as\n`param.Field[io.Reader]`. The contents of the `io.Reader` will by default be sent as a multipart form\npart with the file name of "anonymous_file" and content-type of "application/octet-stream".\n\nThe file name and content-type can be customized by implementing `Name() string` or `ContentType()\nstring` on the run-time type of `io.Reader`. Note that `os.File` implements `Name() string`, so a\nfile returned by `os.Open` will be sent with the file name on disk.\n\nWe also provide a helper `SDK_PackageName.FileParam(reader io.Reader, filename string, contentType string)`\nwhich can be used to wrap any `io.Reader` with the appropriate file name and content type.\n\n\n\n### Retries\n\nCertain errors will be automatically retried 2 times by default, with a short exponential backoff.\nWe retry by default all connection errors, 408 Request Timeout, 409 Conflict, 429 Rate Limit,\nand >=500 Internal errors.\n\nYou can use the `WithMaxRetries` option to configure or disable this:\n\n```go\n// Configure the default for all requests:\nclient := linqgo.NewClient(\n\toption.WithMaxRetries(0), // default is 2\n)\n\n// Override per-request:\nclient.Chats.New(\n\tcontext.TODO(),\n\tlinqgo.ChatNewParams{\n\t\tFrom: "+12052535597",\n\t\tMessage: linqgo.MessageContentParam{\n\t\t\tParts: []linqgo.MessageContentPartUnionParam{{\n\t\t\t\tOfText: &linqgo.TextPartParam{\n\t\t\t\t\tType:  linqgo.TextPartTypeText,\n\t\t\t\t\tValue: "Hello! How can I help you today?",\n\t\t\t\t},\n\t\t\t}},\n\t\t},\n\t\tTo: []string{"+12052532136"},\n\t},\n\toption.WithMaxRetries(5),\n)\n```\n\n\n### Accessing raw response data (e.g. response headers)\n\nYou can access the raw HTTP response data by using the `option.WithResponseInto()` request option. This is useful when\nyou need to examine response headers, status codes, or other details.\n\n```go\n// Create a variable to store the HTTP response\nvar response *http.Response\nchat, err := client.Chats.New(\n\tcontext.TODO(),\n\tlinqgo.ChatNewParams{\n\t\tFrom: "+12052535597",\n\t\tMessage: linqgo.MessageContentParam{\n\t\t\tParts: []linqgo.MessageContentPartUnionParam{{\n\t\t\t\tOfText: &linqgo.TextPartParam{\n\t\t\t\t\tType:  linqgo.TextPartTypeText,\n\t\t\t\t\tValue: "Hello! How can I help you today?",\n\t\t\t\t},\n\t\t\t}},\n\t\t},\n\t\tTo: []string{"+12052532136"},\n\t},\n\toption.WithResponseInto(&response),\n)\nif err != nil {\n\t// handle error\n}\nfmt.Printf("%+v\\n", chat)\n\nfmt.Printf("Status Code: %d\\n", response.StatusCode)\nfmt.Printf("Headers: %+#v\\n", response.Header)\n```\n\n### Making custom/undocumented requests\n\nThis library is typed for convenient access to the documented API. If you need to access undocumented\nendpoints, params, or response properties, the library can still be used.\n\n#### Undocumented endpoints\n\nTo make requests to undocumented endpoints, you can use `client.Get`, `client.Post`, and other HTTP verbs.\n`RequestOptions` on the client, such as retries, will be respected when making these requests.\n\n```go\nvar (\n    // params can be an io.Reader, a []byte, an encoding/json serializable object,\n    // or a "…Params" struct defined in this library.\n    params map[string]interface{}\n\n    // result can be an []byte, *http.Response, a encoding/json deserializable object,\n    // or a model defined in this library.\n    result *http.Response\n)\nerr := client.Post(context.Background(), "/unspecified", params, &result)\nif err != nil {\n    …\n}\n```\n\n#### Undocumented request params\n\nTo make requests using undocumented parameters, you may use either the `SDK_PackageOptionName.WithQuerySet()`\nor the `SDK_PackageOptionName.WithJSONSet()` methods.\n\n```go\nparams := FooNewParams{\n    ID:   SDK_PackageName.F("id_xxxx"),\n    Data: SDK_PackageName.F(FooNewParamsData{\n        FirstName: SDK_PackageName.F("John"),\n    }),\n}\nclient.Foo.New(context.Background(), params, SDK_PackageOptionName.WithJSONSet("data.last_name", "Doe"))\n```\n\n#### Undocumented response properties\n\nTo access undocumented response properties, you may either access the raw JSON of the response as a string\nwith `result.JSON.RawJSON()`, or get the raw JSON of a particular field on the result with\n`result.JSON.Foo.Raw()`.\n\nAny fields that are not present on the response struct will be saved and can be accessed by `result.JSON.ExtraFields()` which returns the extra fields as a `map[string]Field`.\n\n### Middleware\n\nWe provide `SDK_PackageOptionName.WithMiddleware` which applies the given\nmiddleware to requests.\n\n```go\nfunc Logger(req *http.Request, next SDK_PackageOptionName.MiddlewareNext) (res *http.Response, err error) {\n\t// Before the request\n\tstart := time.Now()\n\tLogReq(req)\n\n\t// Forward the request to the next handler\n\tres, err = next(req)\n\n\t// Handle stuff after the request\n\tend := time.Now()\n\tLogRes(res, err, start - end)\n\n    return res, err\n}\n\nclient := SDK_PackageName.SDK_ClientInitializerName(\n\tSDK_PackageOptionName.WithMiddleware(Logger),\n)\n```\n\nWhen multiple middlewares are provided as variadic arguments, the middlewares\nare applied left to right. If `SDK_PackageOptionName.WithMiddleware` is given\nmultiple times, for example first in the client then the method, the\nmiddleware in the client will run first and the middleware given in the method\nwill run next.\n\nYou may also replace the default `http.Client` with\n`SDK_PackageOptionName.WithHTTPClient(client)`. Only one http client is\naccepted (this overwrites any previous client) and receives requests after any\nmiddleware has been applied.\n\n## Semantic versioning\n\nThis package generally follows [SemVer](https://semver.org/spec/v2.0.0.html) conventions, though certain backwards-incompatible changes may be released as minor versions:\n\n1. Changes to library internals which are technically public but not intended or documented for external use. _(Please open a GitHub issue to let us know if you are relying on such internals.)_\n2. Changes that we do not expect to impact the vast majority of users in practice.\n\nWe take backwards-compatibility seriously and work hard to ensure you can rely on a smooth upgrade experience.\n\nWe are keen for your feedback; please open an [issue](https://www.github.com/linq-team/linq-go/issues) with questions, bugs, or suggestions.\n\n## Contributing\n\nSee [the contributing documentation](./CONTRIBUTING.md).\n',
     },
     {
         language: 'python',