@lightninglabs/pi-402 0.0.0-stage → 0.0.1

package/src/wallet.ts

@@ -0,0 +1,1109 @@
+import nodeFs, { existsSync, mkdirSync, readFileSync, writeFileSync } from "node:fs";
+import { createRequire } from "node:module";
+import { dirname, join } from "node:path";
+import { maxSatPerRequest } from "./policy.ts";
+import { dataDir } from "./store.ts";
+
+// WalletService runs against one of two wavewalletdk backends:
+//
+// - **Embedded WASM** (the default): the wavewalletdk-wasm bridge in-process,
+//   with no separate daemon to run. SQLite persists through OPFS in a browser
+//   and through the nodefs VFS under Node, so this is the path for a Node
+//   host like Pi as much as for a page. The bridge installs a global
+//   wavewalletdkCall dispatcher.
+//
+//   Its verbs, apart from start, marshal the SDK's own Go structs in both
+//   directions, so requests use the same PascalCase field names the responses
+//   come back with, and a []byte field is base64. Only start is different: it
+//   is handed through to the daemon's config parser, which reads the
+//   snake_case keys a waved config file uses. Getting this backwards is quiet
+//   rather than loud, because encoding/json ignores a field it cannot match,
+//   so a misspelled request arrives as the zero value.
+// - **Sidecar** (PI402_WALLETD_GATEWAY set): a native waved, driven over its
+//   HTTP/JSON gateway (default localhost:10031). This is for pointing at a
+//   wallet that is already running, or one shared with something else.
+type WavewalletdkCall = (method: string, req?: unknown) => Promise<any>;
+
+// SubscriptionHandle is what the WASM bridge's subscribe resolves to: a pull
+// stream of wallet entries.
+interface SubscriptionHandle {
+	next(): Promise<any | null>;
+	close(): void;
+}
+
+// RestWalletStream is an open NDJSON SubscribeWallet stream against the sidecar
+// gateway: a reader plus a close hook that aborts the underlying request.
+interface RestWalletStream {
+	reader: ReadableStreamDefaultReader<Uint8Array>;
+	close(): void;
+}
+
+// WalletdError is a gateway error carrying the machine-readable cause the
+// daemon sent alongside the human-readable message.
+interface WalletdError extends Error {
+	rpcCode?: number;
+	reason?: string;
+}
+
+// WALLET_NOT_READY_REASON is the ErrorInfo reason waved returns while no
+// wallet has been created yet. It is the signal the bootstrap branches on to
+// tell "create one" apart from a daemon that is genuinely broken.
+const WALLET_NOT_READY_REASON = "WALLET_NOT_READY";
+
+// errorInfoReason digs the ErrorInfo reason out of a gateway error payload.
+// The gateway sends details as a list of typed Any messages, of which the
+// ErrorInfo entry is the one carrying a stable reason string.
+function errorInfoReason(payload: any): string | undefined {
+	if (!Array.isArray(payload?.details)) {
+		return undefined;
+	}
+	for (const detail of payload.details) {
+		if (typeof detail?.reason === "string" && detail.reason) {
+			return detail.reason;
+		}
+	}
+	return undefined;
+}
+
+// DEFAULT_WALLET_PASSWORD is the throwaway password used on non-mainnet dev
+// networks. Mainnet refuses to start with it (resolveWalletPassword).
+const DEFAULT_WALLET_PASSWORD = "pi402-dev-password";
+
+export interface PayResult {
+	preimageHex: string;
+	amountPaidSat: number;
+}
+
+// PREIMAGE_TIMEOUT_MS bounds how long a send may take to settle before the
+// payer gives up. Ark↔Lightning swaps take seconds; minutes means stuck.
+const PREIMAGE_TIMEOUT_MS = 120_000;
+
+// WALLET_READY_TIMEOUT_MS bounds the wait for the embedded daemon to finish
+// bringing up the actors behind an unlocked wallet, and WALLET_READY_POLL_MS
+// is how often it is asked. This takes a second or two against a healthy
+// operator; a minute means something upstream is not answering.
+const WALLET_READY_TIMEOUT_MS = 60_000;
+const WALLET_READY_POLL_MS = 200;
+
+// WALLET_RECOVERY_WINDOW is how many unused addresses a restore scans past
+// before deciding it has found the end of the wallet's history. This is the
+// usual gap limit, and it only applies when a seed is restored: a wallet this
+// extension generated has no history to look for.
+const WALLET_RECOVERY_WINDOW = 100;
+
+// WalletService exposes the operations the extension needs: paying an L402
+// invoice, reading the balance, and producing a boarding address for
+// deposits.
+export class WalletService {
+	private ready = false;
+	private gateway: string | undefined;
+	private call: WavewalletdkCall | undefined;
+
+	// runtimeExited flips when the embedded Go runtime stops running. The
+	// dispatcher global it installed may still exist, but nothing answers it
+	// any more, so calls have to fail fast rather than hang against it.
+	private runtimeExited = false;
+
+	// startAndUnlock brings up the selected backend and unlocks the wallet,
+	// creating it on the first run. It is bootstrapped once per session from
+	// the session_start hook.
+	async startAndUnlock(): Promise<void> {
+		if (this.ready) {
+			return;
+		}
+
+		const password = resolveWalletPassword();
+
+		this.gateway = process.env.PI402_WALLETD_GATEWAY;
+		if (this.gateway) {
+			// Sidecar mode: the daemon is already running. Only unlock (or
+			// create, on the very first run) when the wallet is not already
+			// usable; unlocking an unlocked wallet is an error. The status
+			// probe genuinely may fail if the daemon is down, so surface that
+			// rather than treating it as "not unlocked".
+			//
+			// One failure is not a fault though: waved answers the probe with
+			// FailedPrecondition/WALLET_NOT_READY when no wallet has been
+			// created yet, rather than reporting an un-created wallet in the
+			// response. That is precisely the state the create path exists to
+			// resolve, so it must not abort the bootstrap the way a genuinely
+			// unreachable daemon does.
+			let unlocked = false;
+			try {
+				const status = await this.rest("/v1/wallet/status", {});
+				unlocked = Boolean(status.unlocked);
+			} catch (err) {
+				if (!isWalletMissingError(err)) {
+					throw err;
+				}
+			}
+
+			if (!unlocked) {
+				const passwordB64 = Buffer.from(password).toString("base64");
+				try {
+					await this.rest("/v1/wallet/unlock", { wallet_password: passwordB64 });
+				} catch (err) {
+					// Only create when unlock failed because no wallet exists
+					// yet. A wrong password or an unreachable daemon must not
+					// fall through to blindly creating a fresh wallet.
+					if (!isWalletMissingError(err)) {
+						throw err;
+					}
+					await this.rest("/v1/wallet/create", { wallet_password: passwordB64 });
+				}
+			}
+			this.ready = true;
+			return;
+		}
+
+		this.call = await loadWavewalletdk((err) => this.noteRuntimeExit(err));
+		await this.call("start", startConfigFromEnv());
+
+		// WalletPassword is a []byte on the SDK struct, and encoding/json
+		// reads a []byte from base64. The name has to be the struct's, not
+		// the gateway's wallet_password: Go matches field names
+		// case-insensitively but an underscore is not a case difference, so
+		// that spelling matches nothing, decodes to an empty password, and
+		// comes back as "wallet password must be at least 8 bytes". The
+		// password is not weak, it never arrived.
+		const passwordB64 = Buffer.from(password).toString("base64");
+		try {
+			await this.call("unlockWallet", { WalletPassword: passwordB64 });
+		} catch (err) {
+			// As with the sidecar path, only create when the failure genuinely
+			// means the wallet does not exist yet; otherwise rethrow so a wrong
+			// password or a daemon fault is not masked by a fresh create.
+			if (!isWalletMissingError(err)) {
+				throw err;
+			}
+			await this.createEmbeddedWallet(passwordB64);
+		}
+
+		// Unlocking returns before the daemon has finished standing up the
+		// actors behind it, so the wallet is not usable the instant this
+		// resolves. Waiting here rather than letting the caller find out
+		// keeps the race out of every call site: the alternative is that
+		// whatever runs first after the session_start bootstrap fails with
+		// "wallet actor not initialized", which reads like a broken wallet
+		// rather than one that was asked too early.
+		await this.awaitWalletReady();
+
+		this.ready = true;
+	}
+
+	// createEmbeddedWallet makes the wallet on first run, restoring a seed the
+	// operator supplied or generating one and writing it down.
+	//
+	// Generating a seed and discarding it is the one outcome not on offer.
+	// The wallet's database is the only record of a generated key, so losing
+	// the data directory would take the funds with it, and nothing would have
+	// warned anyone that was possible.
+	private async createEmbeddedWallet(passwordB64: string): Promise<void> {
+		const call = this.requireCall();
+		const mnemonic = restoreMnemonic();
+
+		const req: Record<string, unknown> = { WalletPassword: passwordB64 };
+		if (mnemonic.length > 0) {
+			req.Mnemonic = mnemonic;
+
+			// A restored seed has history the local database knows nothing
+			// about, so ask the daemon to go and find it. Without this the
+			// wallet comes back correct but empty until something else
+			// triggers a scan.
+			req.RecoverState = true;
+			req.RecoveryWindow = WALLET_RECOVERY_WINDOW;
+		} else {
+			assertSeedIsSafeToGenerate();
+			assertNoStaleSeedFile();
+		}
+
+		const created = await call("createWallet", req);
+
+		// A restored wallet's seed is already in the operator's hands, so
+		// writing a second copy would add an exposure and no safety.
+		if (mnemonic.length === 0) {
+			try {
+				writeSeedFile(created?.Mnemonic);
+			} catch (err) {
+				// The wallet now exists in the daemon's database with a seed
+				// that was never recorded, and the next start would unlock it
+				// without noticing anything wrong. Name that state exactly and
+				// say how to leave it, because the recovery is only safe at
+				// this instant: the wallet is still empty, so deleting it
+				// loses nothing, whereas once it is funded the directory is
+				// the only key to the funds.
+				const detail = err instanceof Error ? err.message : String(err);
+				throw new Error(
+					"the wallet was just created but its seed backup could " +
+						`not be written (${detail}); the new wallet has no ` +
+						"seed backup, so delete the wallet directory at " +
+						`${walletDataDir()} and start again. Deleting it is ` +
+						"only safe right now, while the wallet is still empty.",
+					{ cause: err },
+				);
+			}
+		}
+	}
+
+	// awaitWalletReady polls until the embedded daemon reports its wallet
+	// usable, or gives up with an error naming the wait.
+	//
+	// The signal is Status.Ready rather than the walletReady verb. The latter
+	// reports GetInfo's view, which flips as soon as the wallet is unlocked
+	// and while the actors that actually serve requests are still starting.
+	// Trusting it leaves a window of a few hundred milliseconds in which a
+	// boarding address or a send fails with "wallet actor not initialized",
+	// which is the sort of race that passes locally and breaks under load.
+	private async awaitWalletReady(): Promise<void> {
+		const call = this.requireCall();
+		const deadline = Date.now() + WALLET_READY_TIMEOUT_MS;
+
+		for (;;) {
+			const status = await call("status");
+			if (status?.Ready) {
+				return;
+			}
+
+			if (Date.now() > deadline) {
+				throw new Error(
+					`the embedded wallet did not become ready within ${WALLET_READY_TIMEOUT_MS / 1000}s of unlocking`,
+				);
+			}
+
+			await new Promise((resolve) => setTimeout(resolve, WALLET_READY_POLL_MS));
+		}
+	}
+
+	// payInvoice pays a BOLT11 invoice via a two-phase wavewalletdk send.
+	// prepareSend quotes the payment (including the swap fee), send
+	// dispatches it, and the preimage is read from the settled entry once
+	// the swap completes.
+	//
+	// The budget cap is re-asserted here, after the quote, on the QUOTED TOTAL
+	// OUTFLOW (invoice principal plus swap fee) rather than the counterparty's
+	// stated amount. The buyer policy runs earlier on the proxy's stated
+	// amountSat, but only the quote reveals the invoice's real encoded amount
+	// plus the swap fee the wallet will actually pay. We refuse before
+	// dispatching send if that total exceeds the per-request ceiling.
+	async payInvoice(invoice: string, _amountSat: number): Promise<PayResult> {
+		const ceiling = maxSatPerRequest();
+
+		if (this.gateway) {
+			const quote = await this.rest("/v1/wallet/prepare-send", { invoice });
+			const outflow = quotedOutflowSat(quote);
+			assertWithinCeiling(outflow, ceiling);
+
+			// Open the settle stream BEFORE dispatching the send. Subscribing
+			// after send relies on include_existing to replay the settle, and a
+			// missed settle would spin to the timeout and (with SDK retries
+			// disabled upstream) surface as a hard error rather than a second
+			// payment. Opening first closes that race.
+			const stream = await this.openWalletStreamRest();
+			try {
+				await this.rest("/v1/wallet/send", { send_intent_id: quote.send_intent_id });
+				const preimageHex = await this.readPreimageRest(stream, String(quote.payment_hash));
+				return {
+					preimageHex,
+					amountPaidSat: outflow,
+				};
+			} finally {
+				stream.close();
+			}
+		}
+
+		const call = this.requireCall();
+		const quote = await call("prepareSend", { Invoice: invoice });
+		const outflow = quotedOutflowSat(quote);
+		assertWithinCeiling(outflow, ceiling);
+
+		// Same ordering as the sidecar path: subscribe before sendPrepared so a
+		// fast settle cannot be missed.
+		const handle: SubscriptionHandle = await call("subscribe", { IncludeExisting: true });
+		try {
+			await call("sendPrepared", { SendIntentID: quote.SendIntentID });
+			const preimageHex = await this.readPreimageWasm(handle, String(quote.PaymentHash));
+			return {
+				preimageHex,
+				amountPaidSat: outflow,
+			};
+		} finally {
+			handle.close();
+		}
+	}
+
+	// confirmedBalanceSat returns the spendable wallet balance in sats.
+	async confirmedBalanceSat(): Promise<number> {
+		if (this.gateway) {
+			const res = await this.rest("/v1/wallet/balance", {});
+			return Number(res.confirmed_sat);
+		}
+		return this.requireCall()("confirmedBalanceSat");
+	}
+
+	// depositAddress returns an on-chain boarding address to fund the wallet.
+	async depositAddress(): Promise<string> {
+		if (this.gateway) {
+			const res = await this.rest("/v1/wallet/deposit", {});
+			return res.onchain_address;
+		}
+		const res = await this.requireCall()("deposit", {});
+		return res.Address ?? res.address;
+	}
+
+	// receiveInvoice returns a BOLT11 invoice for the given amount that any
+	// Lightning wallet can pay to fund this one. The daemon sets up the
+	// inbound receive through its swap subsystem, so the funds arrive as
+	// spendable balance in seconds.
+	//
+	// This is the fast counterpart to depositAddress: an on-chain boarding
+	// deposit costs a confirmation plus an Ark round before it can be spent,
+	// which is minutes at best.
+	async receiveInvoice(amountSat: number, memo = "pi-402 wallet funding"): Promise<string> {
+		if (!Number.isInteger(amountSat) || amountSat <= 0) {
+			throw new Error(`funding amount must be a positive whole number of sats, got ${amountSat}`);
+		}
+
+		if (this.gateway) {
+			const res = await this.rest("/v1/wallet/recv", {
+				amt_sat: amountSat,
+				memo,
+			});
+			return res.invoice;
+		}
+
+		// The WASM bridge marshals the Go request struct, so its field names
+		// are PascalCase; the gateway's JSON gateway uses snake_case. Read the
+		// response tolerantly for the same reason.
+		const res = await this.requireCall()("receive", {
+			AmountSat: amountSat,
+			Memo: memo,
+		});
+		return res.Invoice ?? res.invoice;
+	}
+
+	// openWalletStreamRest opens the gateway's SubscribeWallet NDJSON stream. It
+	// is opened before the send is dispatched so the settle cannot be missed;
+	// the caller reads it via readPreimageRest and must close it.
+	private async openWalletStreamRest(): Promise<RestWalletStream> {
+		const controller = new AbortController();
+		const res = await fetch(`${this.gateway}/v1/wallet/subscribe`, {
+			method: "POST",
+			headers: { "Content-Type": "application/json" },
+			body: JSON.stringify({ include_existing: true }),
+			signal: controller.signal,
+		});
+		if (!res.ok || !res.body) {
+			controller.abort();
+			throw new Error(`subscribe failed: ${res.status}`);
+		}
+		return {
+			reader: res.body.getReader(),
+			close: () => controller.abort(),
+		};
+	}
+
+	// readPreimageRest reads the gateway's NDJSON WalletEntry stream until the
+	// send for the given payment hash settles, then returns the preimage riding
+	// entry.progress.preimage.
+	private async readPreimageRest(stream: RestWalletStream, paymentHash: string): Promise<string> {
+		// timedOut distinguishes our own deadline abort from any other read
+		// rejection, so the timeout surfaces as a descriptive error rather than
+		// a bare AbortError.
+		let timedOut = false;
+		const timeout = setTimeout(() => {
+			timedOut = true;
+			stream.close();
+		}, PREIMAGE_TIMEOUT_MS);
+
+		const { reader } = stream;
+		const decoder = new TextDecoder();
+		const framer = new NdjsonFramer();
+		try {
+			for (;;) {
+				let chunk: ReadableStreamReadResult<Uint8Array>;
+				try {
+					chunk = await reader.read();
+				} catch (err) {
+					if (timedOut) {
+						throw new Error(`timed out waiting for preimage of ${paymentHash}`);
+					}
+					throw err;
+				}
+				const { done, value } = chunk;
+				if (done) {
+					throw new Error(`subscribe stream ended before preimage of ${paymentHash}`);
+				}
+
+				for (const line of framer.push(decoder.decode(value, { stream: true }))) {
+					const preimage = preimageFromFrame(JSON.parse(line), paymentHash);
+					if (preimage !== undefined) {
+						return preimage;
+					}
+				}
+			}
+		} finally {
+			clearTimeout(timeout);
+		}
+	}
+
+	// readPreimageWasm reads the WASM bridge's activity stream until the send
+	// for the given payment hash settles. The handle is opened by the caller
+	// before the send is dispatched, and closed by the caller.
+	private async readPreimageWasm(handle: SubscriptionHandle, paymentHash: string): Promise<string> {
+		let timedOut = false;
+		const timeout = setTimeout(() => {
+			timedOut = true;
+			handle.close();
+		}, PREIMAGE_TIMEOUT_MS);
+		try {
+			for (;;) {
+				const entry = await handle.next();
+				if (entry === null) {
+					if (timedOut) {
+						throw new Error(`timed out waiting for preimage of ${paymentHash}`);
+					}
+					throw new Error(`subscribe stream ended before preimage of ${paymentHash}`);
+				}
+				if (entry.Progress?.PaymentHash !== paymentHash) {
+					continue;
+				}
+				if (entry.Status === "failed") {
+					throw new Error(`send failed: ${entry.FailureReason ?? "unknown"}`);
+				}
+				if (entry.Progress?.Preimage) {
+					return entry.Progress.Preimage;
+				}
+			}
+		} finally {
+			clearTimeout(timeout);
+		}
+	}
+
+	// rest issues a unary call against the sidecar's HTTP/JSON gateway. The
+	// gateway marshals with proto names, so requests and responses both use
+	// snake_case fields; proto bytes fields ride as base64 strings.
+	private async rest(path: string, body: unknown): Promise<any> {
+		const res = await fetch(`${this.gateway}${path}`, {
+			method: "POST",
+			headers: { "Content-Type": "application/json" },
+			body: JSON.stringify(body),
+		});
+		const payload = await res.json().catch(() => ({}));
+		if (!res.ok) {
+			const err = new Error(`walletd ${path} failed (${res.status}): ${payload.message ?? ""}`) as WalletdError;
+			// The gateway reports the machine-readable cause in an ErrorInfo
+			// detail. Carry the code and reason onto the error so callers can
+			// branch on them instead of matching prose, which changes between
+			// daemon releases in a way the wire contract does not.
+			err.rpcCode = typeof payload.code === "number" ? payload.code : undefined;
+			err.reason = errorInfoReason(payload);
+			throw err;
+		}
+		return payload;
+	}
+
+	// noteRuntimeExit records that the embedded Go runtime is gone. The
+	// program is supposed to run for the lifetime of the process, so any exit
+	// is the wallet dying, and the only useful things to do are say so once,
+	// with the error when there is one, and make every later call fail fast
+	// with that story instead of a timeout or a hang.
+	private noteRuntimeExit(err: unknown): void {
+		this.runtimeExited = true;
+		this.ready = false;
+
+		if (err === undefined) {
+			console.error("[pi-402] embedded wallet runtime exited");
+		} else {
+			console.error("[pi-402] embedded wallet runtime exited:", err);
+		}
+	}
+
+	private requireCall(): WavewalletdkCall {
+		if (this.runtimeExited) {
+			throw new Error("the embedded wallet runtime exited; restart the session to bring the wallet back up");
+		}
+		if (!this.call) {
+			throw new Error("wallet not started; run startAndUnlock first");
+		}
+		return this.call;
+	}
+}
+
+// startConfigFromEnv builds the embedded WASM start config. Defaults target
+// the local regtest harness; production deployments override via env.
+function startConfigFromEnv(): Record<string, unknown> {
+	const network = process.env.PI402_NETWORK ?? "regtest";
+	const isMainnet = network === "mainnet";
+
+	// Only regtest gets endpoints from here. Every other network has hosted
+	// operator, swap and chain endpoints that the embedded daemon resolves
+	// from the network name, so naming them would mean shipping a second copy
+	// of that list to drift against the first. Regtest is the exception
+	// because there is nothing hosted to resolve: the endpoints are whatever
+	// the local compose stack published.
+	const isLocal = network === "regtest";
+
+	// Insecure transport belongs to a local endpoint, not to a network.
+	// Deriving it from "not mainnet" was wrong the moment this stopped being
+	// regtest-only: the signet operator and swap server are reached over TLS
+	// on 443, and asking for plaintext there fails to connect rather than
+	// falling back.
+	const insecure = envFlag("PI402_SERVER_INSECURE") ?? isLocal;
+
+	// A Node host has a real filesystem, so the wasm entry point refuses the
+	// browser default of /wavelength rather than trying to create it: that is
+	// a path at the filesystem root, and os.MkdirAll there fails with EROFS or
+	// EACCES. It wants an explicit directory, and the natural one is beside
+	// the token cache and receipt ledger under the pi-402 data directory.
+	// REST rather than gRPC, always. This is a property of the host and not
+	// of the network: the wasm build has no gRPC transport at all, because
+	// gRPC needs a socket and js/wasm has none, so connecting that way fails
+	// with "wavewalletdk gRPC transport is unavailable". The operator and
+	// swap server publish a grpc-gateway REST endpoint for exactly this, and
+	// the daemon resolves the right one per network once it is told which
+	// transport to want.
+	const config: Record<string, unknown> = {
+		network,
+		data_dir: walletDataDir(),
+		allow_mainnet: isMainnet,
+		server_transport: "rest",
+		swap_server_transport: "rest",
+	};
+
+	// The embedded daemon logs through this process, and under Pi that means
+	// straight over the TUI, so it defaults to errors only. A stuck swap says
+	// almost nothing even at info level, so when debugging one, raise it with
+	// PI402_DEBUG_LEVEL=debug (or trace), or per subsystem as in
+	// "info,ROND=debug". Any level btclog accepts works: trace, debug, info,
+	// warn, error, critical, or off.
+	config.debug_level = process.env.PI402_DEBUG_LEVEL || "error";
+
+	const arkServer = process.env.PI402_ARK_SERVER ?? (isLocal ? "127.0.0.1:7070" : "");
+	if (arkServer) {
+		config.server_address = arkServer;
+		config.server_insecure = insecure;
+	}
+
+	const swapServer = process.env.PI402_SWAP_SERVER ?? (isLocal ? "127.0.0.1:8082" : "");
+	if (swapServer) {
+		config.swap_server_address = swapServer;
+		config.swap_server_insecure = insecure;
+	}
+
+	const esplora = process.env.PI402_ESPLORA_URL ?? (isLocal ? "http://127.0.0.1:3002" : "");
+	if (esplora) {
+		config.wallet_esplora_url = esplora;
+	}
+
+	return config;
+}
+
+// walletDataDir is where the embedded daemon keeps its databases, and beside
+// them the seed of a wallet this extension generated.
+function walletDataDir(): string {
+	return process.env.PI402_WALLET_DIR ?? join(dataDir(), "wallet");
+}
+
+// SEED_FILE is the name the generated mnemonic is written under.
+const SEED_FILE = "seed.txt";
+
+// restoreMnemonic reads a seed the operator wants restored, as the words
+// separated by whitespace. Empty means generate a fresh one.
+function restoreMnemonic(): string[] {
+	const raw = (process.env.PI402_WALLET_MNEMONIC ?? "").trim();
+	if (raw === "") {
+		return [];
+	}
+
+	return raw.split(/\s+/);
+}
+
+// assertSeedIsSafeToGenerate refuses to generate a mainnet seed that would be
+// written to disk in the clear.
+//
+// On a test network the seed file is the difference between a recoverable
+// wallet and a disposable one, and the funds it protects are worth nothing.
+// On mainnet the same file is a key to real money sitting next to the database
+// it unlocks, readable by anything running as this user. That is a decision
+// for whoever is deploying, not a default this extension should pick for them,
+// so mainnet either restores a seed the operator already holds or says plainly
+// what it is being asked to do.
+//
+// Exported for tests.
+export function assertSeedIsSafeToGenerate(): void {
+	const isMainnet = (process.env.PI402_NETWORK ?? "regtest") === "mainnet";
+	if (!isMainnet || envFlag("PI402_ALLOW_PLAINTEXT_SEED") === true) {
+		return;
+	}
+
+	throw new Error(
+		"refusing to generate a mainnet wallet seed, which would be " +
+			"written to disk in the clear: either restore a seed you " +
+			"already hold with PI402_WALLET_MNEMONIC, or set " +
+			"PI402_ALLOW_PLAINTEXT_SEED=1 to accept a plaintext seed " +
+			`file at ${join(walletDataDir(), SEED_FILE)}`,
+	);
+}
+
+// assertNoStaleSeedFile refuses to create a fresh wallet while a seed file
+// from an earlier wallet is still sitting in the data directory.
+//
+// Reaching the create path with a seed file already present means the wallet
+// database is gone but the seed of the wallet it belonged to is not. Creating
+// a new wallet anyway would be quietly destructive twice over: writeSeedFile
+// must not clobber the old words, so the new wallet's seed would have nowhere
+// to go, and the stale file would sit beside the new database masquerading as
+// its backup. Whoever restored from it later would recover the wrong wallet.
+function assertNoStaleSeedFile(): void {
+	const path = join(walletDataDir(), SEED_FILE);
+	if (!existsSync(path)) {
+		return;
+	}
+
+	throw new Error(
+		`refusing to create a new wallet: a seed file already exists at ` +
+			`${path} but the wallet it belongs to does not. To restore that ` +
+			"wallet, set PI402_WALLET_MNEMONIC to its words; to start " +
+			"fresh, move the seed file somewhere safe first.",
+	);
+}
+
+// writeSeedFile records a freshly generated mnemonic beside the wallet.
+//
+// It is written once, and never over an existing file: a second write would
+// mean the wallet was recreated, and clobbering the previous words would
+// destroy the only copy of a key that may still hold funds.
+//
+// Exported for tests.
+export function writeSeedFile(mnemonic: unknown): void {
+	if (!Array.isArray(mnemonic) || mnemonic.length === 0) {
+		throw new Error(
+			"the wallet was created but returned no seed words, so there " +
+				"is nothing to back it up with; refusing to continue with " +
+				"an unrecoverable wallet",
+		);
+	}
+
+	const dir = walletDataDir();
+	const path = join(dir, SEED_FILE);
+
+	mkdirSync(dir, { recursive: true, mode: 0o700 });
+	writeFileSync(path, `${mnemonic.join(" ")}\n`, { mode: 0o600, flag: "wx" });
+
+	console.error(
+		`[pi-402] created a new wallet; its seed is at ${path}. Back it up: ` +
+			"it is the only copy, and the wallet cannot be recovered without it.",
+	);
+}
+
+// envFlag reads a boolean environment override, returning undefined when the
+// variable is unset so a caller can tell "not configured" from "configured
+// false".
+function envFlag(name: string): boolean | undefined {
+	const raw = process.env[name];
+	if (raw === undefined || raw === "") {
+		return undefined;
+	}
+
+	return raw === "1" || raw.toLowerCase() === "true";
+}
+
+// resolveWalletPassword returns the wallet password from the environment. On
+// mainnet it refuses the built-in dev default: a real-money wallet fronted by an
+// unauthenticated local gateway must not ship with a public, hardcoded password.
+function resolveWalletPassword(): string {
+	const password = process.env.PI402_WALLET_PASSWORD ?? DEFAULT_WALLET_PASSWORD;
+	const isMainnet = (process.env.PI402_NETWORK ?? "regtest") === "mainnet";
+	if (isMainnet && password === DEFAULT_WALLET_PASSWORD) {
+		throw new Error(
+			"refusing to start a mainnet wallet with the default password; set PI402_WALLET_PASSWORD to a strong secret",
+		);
+	}
+	return password;
+}
+
+// quotedOutflowSat extracts the total sats the wallet will actually pay from a
+// prepare-send quote: the invoice principal plus any swap fee. The sidecar
+// gateway marshals proto JSON as snake_case; the WASM bridge marshals Go structs
+// as PascalCase. We accept either casing and prefer an explicit total-outflow
+// field when the backend provides one, falling back to principal plus fee.
+function quotedOutflowSat(quote: any): number {
+	const pick = (...keys: string[]): number => {
+		for (const key of keys) {
+			const value = Number(quote?.[key]);
+			if (Number.isFinite(value)) {
+				return value;
+			}
+		}
+		return 0;
+	};
+
+	const total = pick("expected_total_outflow_sat", "ExpectedTotalOutflowSat", "total_outflow_sat", "TotalOutflowSat");
+	if (total > 0) {
+		return total;
+	}
+
+	const principal = pick("amount_sat", "AmountSat");
+	const fee = pick("fee_sat", "FeeSat", "swap_fee_sat", "SwapFeeSat", "total_fee_sat", "TotalFeeSat");
+	return principal + fee;
+}
+
+// assertWithinCeiling refuses a quoted outflow that exceeds the per-request
+// spend ceiling. This honors the documented invariant that the budget is
+// asserted on the quoted total outflow, not the invoice face value.
+function assertWithinCeiling(outflowSat: number, ceilingSat: number): void {
+	if (!Number.isFinite(outflowSat) || outflowSat <= 0) {
+		throw new Error(`prepare-send returned an unusable quote (outflow ${outflowSat} sat)`);
+	}
+	if (outflowSat > ceilingSat) {
+		throw new Error(`quoted outflow ${outflowSat} sat exceeds per-request cap ${ceilingSat} sat`);
+	}
+}
+
+// NdjsonFramer reassembles newline-delimited JSON lines from a stream of text
+// chunks. A chunk may split a line mid-object, so partial content is held in the
+// buffer until its terminating newline arrives. Blank lines are dropped.
+export class NdjsonFramer {
+	private buffer = "";
+
+	// push feeds a decoded text chunk and returns the complete lines it
+	// completed. Any trailing partial line is retained for the next push.
+	push(chunk: string): string[] {
+		this.buffer += chunk;
+		const lines: string[] = [];
+		let newline = this.buffer.indexOf("\n");
+		while (newline >= 0) {
+			const line = this.buffer.slice(0, newline).trim();
+			this.buffer = this.buffer.slice(newline + 1);
+			newline = this.buffer.indexOf("\n");
+			if (line) {
+				lines.push(line);
+			}
+		}
+		return lines;
+	}
+}
+
+// preimageFromFrame classifies one decoded SubscribeWallet frame (sidecar
+// proto-JSON, snake_case). It returns the preimage once the entry for the given
+// payment hash settles, undefined for frames that are not yet terminal, and
+// throws on a gateway error frame, a gap signal, or a failed send.
+export function preimageFromFrame(frame: any, paymentHash: string): string | undefined {
+	// A gateway-level error frame (e.g. {"error": {...}}) means the stream
+	// itself failed; fail fast instead of spinning to the timeout.
+	if (frame?.error) {
+		const detail = frame.error.message ?? JSON.stringify(frame.error);
+		throw new Error(`subscribe stream error: ${detail}`);
+	}
+	const update = frame?.result ?? frame;
+
+	// The resumable SubscribeWallet protocol wraps each item in a
+	// {cursor, entry|gap} envelope. A gap means the daemon dropped events we
+	// may have needed (the settle could be among them), so fail fast rather
+	// than spin to the timeout on a stream that can no longer deliver it.
+	if (update?.gap) {
+		const reason = update.gap.reason || "subscriber fell behind";
+		throw new Error(`subscribe stream gapped: ${reason}`);
+	}
+
+	// Unwrap the envelope, tolerating the older bare WalletEntry shape from
+	// pre-envelope daemons.
+	const entry = update?.entry ?? update;
+	const progress = entry?.progress;
+	if (progress?.payment_hash !== paymentHash) {
+		return undefined;
+	}
+	if (entry.status === "ENTRY_STATUS_FAILED") {
+		throw new Error(`send failed: ${entry.failure_reason ?? "unknown"}`);
+	}
+	if (progress?.preimage) {
+		return progress.preimage;
+	}
+	return undefined;
+}
+
+// isWalletMissingError reports whether an unlock/status error means the wallet
+// simply does not exist yet (so creating one is the right recovery), as opposed
+// to a wrong password or an unreachable daemon, which must propagate. The
+// sidecar returns a gRPC-ish code/message; the WASM path an error string.
+function isWalletMissingError(err: unknown): boolean {
+	// The structured reason is the reliable signal when the gateway sends
+	// one, so check it before falling back to matching prose.
+	if ((err as WalletdError)?.reason === WALLET_NOT_READY_REASON) {
+		return true;
+	}
+
+	const message = (err instanceof Error ? err.message : String(err)).toLowerCase();
+	// gRPC NotFound is code 5; the message wording covers both backends.
+	return (
+		message.includes("not found") ||
+		message.includes("no wallet") ||
+		message.includes("does not exist") ||
+		message.includes("wallet not initialized") ||
+		message.includes("wallet does not exist") ||
+		message.includes("wallet is not ready") ||
+		// Unlock on a never-created wallet reports that it is not locked.
+		// Match the state rather than that phrase alone: the same wording
+		// with any other state means the wallet exists and is already
+		// usable, which must not fall through to creating a fresh one.
+		message.includes("state=none") ||
+		/\bcode\W*5\b/.test(message)
+	);
+}
+
+// WASM_GLOBAL is the dispatcher the wasm bridge installs once its Go runtime
+// is up, and WASM_BINARY is the artifact that installs it. Both names come
+// from cmd/wavewalletdk-wasm in wavelength and have to match it exactly.
+const WASM_GLOBAL = "wavewalletdkCall";
+const WASM_BINARY = "wavewalletdk.wasm";
+
+// loadWavewalletdk instantiates the wavewalletdk WASM binary and resolves its
+// call dispatcher. The artifact directory holds that binary, Go's wasm_exec.js
+// glue, and the SQLite runtime assets, all produced by `make wasm-wallet` in
+// wavelength. It is located via PI402_WASM_DIR or a bundled ./wasm directory.
+//
+// Two globals have to be in place before the module is instantiated, and both
+// are what make this work under Node rather than only in a browser:
+//
+//   - globalThis.fs. Go's wasm_exec.js installs a stub filesystem whose every
+//     call fails with ENOSYS, but only when the host has not already provided
+//     one. Handing it node:fs is what lets the daemon create its data
+//     directory and lets the nodefs SQLite VFS reach the disk.
+//   - globalThis.sqliteBridgeAssetDir. The bridge spawns its SQLite worker
+//     from this directory and loads sqlite3.js, sqlite-worker.js and
+//     sqlite-node-vfs.js out of it. Without it the worker resolves those
+//     relative to a page URL that does not exist here.
+// The onExit callback fires once if the Go program ever stops running, with
+// the error that killed it when there is one.
+async function loadWavewalletdk(onExit: (err: unknown) => void): Promise<WavewalletdkCall> {
+	const g = globalThis as any;
+
+	// An existing dispatcher means an earlier load in this process owns the
+	// runtime, and that load's own exit watcher is the one wired to it.
+	const existing = g[WASM_GLOBAL];
+	if (typeof existing === "function") {
+		return existing as WavewalletdkCall;
+	}
+
+	// The bridge dispatches lifecycle CustomEvents on globalThis, which is
+	// not an EventTarget under Node; back those methods with one.
+	if (typeof g.dispatchEvent !== "function") {
+		const events = new EventTarget();
+		g.addEventListener = events.addEventListener.bind(events);
+		g.removeEventListener = events.removeEventListener.bind(events);
+		g.dispatchEvent = events.dispatchEvent.bind(events);
+	}
+
+	const wasmDir = process.env.PI402_WASM_DIR ?? join(import.meta.dirname, "..", "wasm");
+
+	// Fail here, naming the file, rather than letting the wallet come up
+	// against a bundle missing the pieces its database needs and discover it
+	// as an unexplained open failure much later.
+	requireWasmAssets(wasmDir);
+	assertWasmDirIsCommonJs(wasmDir);
+
+	// Both of these are read during instantiation, so they have to be set
+	// before it rather than after.
+	g.fs ??= nodeFs;
+	g.sqliteBridgeAssetDir = wasmDir;
+
+	loadSqliteBridge(wasmDir);
+
+	// Evaluate Go's wasm_exec.js glue, which defines globalThis.Go.
+	const glue = readFileSync(join(wasmDir, "wasm_exec.js"), "utf8");
+	// eslint-disable-next-line no-new-func
+	new Function(glue)();
+
+	const GoRuntime = g.Go;
+	if (!GoRuntime) {
+		throw new Error("wasm_exec.js did not define the Go runtime");
+	}
+
+	const go = new GoRuntime();
+	const wasmBytes = readFileSync(join(wasmDir, WASM_BINARY));
+	const { instance } = await WebAssembly.instantiate(wasmBytes, go.importObject);
+
+	// The Go program runs for the lifetime of the process, so its run promise
+	// is not awaited. It is watched, though: discarding it outright would
+	// make a runtime death invisible, leaving every later call to fail as an
+	// unexplained timeout or hang, with the root cause logged nowhere.
+	let running: Promise<unknown> | undefined;
+	withFetchEnabled(() => {
+		running = go.run(instance) as Promise<unknown>;
+	});
+	running?.then(
+		() => onExit(undefined),
+		(err: unknown) => onExit(err),
+	);
+
+	// The bridge installs the dispatcher once the runtime is up. It also
+	// fires a ready event, but that can race the listener, so poll for the
+	// global instead.
+	await waitForGlobal(WASM_GLOBAL, 30_000);
+
+	return g[WASM_GLOBAL] as WavewalletdkCall;
+}
+
+// withFetchEnabled runs the Go program's start-up with a process object whose
+// argv0 does not name Node, so the wallet can reach the network.
+//
+// Go's js/wasm net/http turns the Fetch API off when it sees a Node host, and
+// decides that with a literal prefix test on process.argv0 (roundtrip_js.go,
+// go.dev/issue/57613). What it falls back to is the js/wasm fake network,
+// which has no sockets, so every request the daemon makes dies in the resolver
+// with "write udp 127.0.0.1:8". A browser never sees this because there the
+// test is false and fetch is used. The wasm build talks to the operator, the
+// swap server and esplora over REST, all of which fetch serves perfectly well,
+// so this is only about clearing a check aimed at an older Node.
+//
+// argv0 on the real process object is neither writable nor configurable, so
+// the stand-in is an object that inherits from it and shadows that one
+// property. A Proxy cannot do this: reporting a value other than the target's
+// for a non-configurable, non-writable data property violates an invariant the
+// engine enforces, and it throws. Inheritance has no such rule, and every
+// other property still resolves through the prototype to the real process.
+//
+// The window is as small as it can be. The flag is a package-level variable,
+// so it is read during Go's package initialization, which runs in the
+// synchronous part of go.run before it yields, and the real object is back in
+// place before any other code observes the swap.
+//
+// Exported for tests.
+export function withFetchEnabled(run: () => void): void {
+	const real = globalThis.process;
+	if (typeof real?.argv0 !== "string" || !real.argv0.startsWith("node")) {
+		run();
+
+		return;
+	}
+
+	const shim = Object.create(real);
+	Object.defineProperty(shim, "argv0", {
+		value: "pi402-embedded-wallet",
+		enumerable: true,
+	});
+
+	const install = (value: unknown) =>
+		Object.defineProperty(globalThis, "process", {
+			value,
+			writable: true,
+			configurable: true,
+			enumerable: false,
+		});
+
+	install(shim);
+	try {
+		run();
+	} finally {
+		install(real);
+	}
+}
+
+// loadSqliteBridge evaluates sqlite-bridge.js, which installs the
+// globalThis.sqliteBridge the driver looks for. A browser gets this from a
+// script tag; there is no equivalent here, and without it the wallet's first
+// database open fails with "sqlite bridge not loaded".
+//
+// The file is an IIFE that reaches for require() to pull in node:path and
+// node:worker_threads. This module is ESM, where require is not a global, so
+// one is built for it and passed in as a parameter of the wrapping function.
+// Evaluating the source rather than importing the path also sidesteps the
+// question of how a ".js" file inside a "type": "module" package would be
+// interpreted, which is the same reason the bridge evaluates its own worker.
+function loadSqliteBridge(wasmDir: string): void {
+	if ((globalThis as any).sqliteBridge) {
+		return;
+	}
+
+	const source = readFileSync(join(wasmDir, "sqlite-bridge.js"), "utf8");
+	// eslint-disable-next-line no-new-func
+	new Function("require", source)(createRequire(import.meta.url));
+
+	if (!(globalThis as any).sqliteBridge) {
+		throw new Error("sqlite-bridge.js did not install globalThis.sqliteBridge");
+	}
+}
+
+// WASM_ASSETS is every file the bundle has to carry. sqlite-node-vfs.js is the
+// one that is easy to miss: it ships in the same asset set but is loaded only
+// by a Node host, so a bundle staged before that file existed looks complete
+// and fails at the first database open.
+const WASM_ASSETS = [
+	"wasm_exec.js",
+	WASM_BINARY,
+	"sqlite3.js",
+	"sqlite3.wasm",
+	"sqlite-bridge.js",
+	"sqlite-worker.js",
+	"sqlite-node-vfs.js",
+];
+
+// requireWasmAssets checks the bundle is complete before anything is loaded.
+function requireWasmAssets(wasmDir: string): void {
+	const missing = WASM_ASSETS.filter((name) => !existsSync(join(wasmDir, name)));
+	if (missing.length === 0) {
+		return;
+	}
+
+	throw new Error(
+		`wasm bundle at ${wasmDir} is missing ${missing.join(", ")}; ` +
+			"rebuild it with `make wasm-wallet` in wavelength and point " +
+			"PI402_WASM_DIR at the resulting bin/wasm",
+	);
+}
+
+// assertWasmDirIsCommonJs refuses a bundle that Node would load as ES modules.
+//
+// The bundle's .js files are CommonJS, and the SQLite worker require()s two of
+// them. Node picks the module system for a .js file from the nearest
+// package.json at or above it, and pi-402 itself declares "type": "module". A
+// bundle placed inside the package with no package.json of its own therefore
+// inherits that, and the worker's require() fails. The bridge reports it as
+// "sqlite worker initialization failed: <object>", which names nothing, so we
+// look for the cause ourselves and say what to do about it.
+// scripts/stage-wasm.sh writes the package.json that prevents this.
+//
+// Exported for tests.
+export function assertWasmDirIsCommonJs(wasmDir: string): void {
+	for (let dir = wasmDir; ; dir = dirname(dir)) {
+		const manifest = join(dir, "package.json");
+		if (existsSync(manifest)) {
+			// A manifest Node cannot parse fails the worker the same opaque
+			// way, so name it here rather than passing it through.
+			let type: unknown;
+			try {
+				type = JSON.parse(readFileSync(manifest, "utf8")).type;
+			} catch (err) {
+				throw new Error(`unable to parse ${manifest}, which scopes the wasm bundle at ${wasmDir}`, {
+					cause: err,
+				});
+			}
+
+			if (type === "module") {
+				throw new Error(
+					`wasm bundle at ${wasmDir} would load as ES modules, because ` +
+						`${manifest} declares "type": "module"; the bundle is ` +
+						'CommonJS. Add a package.json containing {"type":"commonjs"} ' +
+						"to the bundle directory (in a checkout, scripts/stage-wasm.sh writes it)",
+				);
+			}
+
+			return;
+		}
+
+		if (dirname(dir) === dir) {
+			return;
+		}
+	}
+}
+
+// waitForGlobal polls for a global symbol installed by the WASM bridge.
+async function waitForGlobal(name: string, timeoutMs: number): Promise<void> {
+	const start = Date.now();
+	while (typeof (globalThis as any)[name] !== "function") {
+		if (Date.now() - start > timeoutMs) {
+			throw new Error(`wavewalletdk WASM did not install ${name} within ${timeoutMs}ms`);
+		}
+		await new Promise((resolve) => setTimeout(resolve, 100));
+	}
+}