@lifi/composer-sdk 0.7.1 → 0.8.1

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@lifi/composer-sdk",
-  "version": "0.7.1",
+  "version": "0.8.1",
   "description": "Public Composer SDK for building and submitting flows",
   "license": "Apache-2.0",
   "repository": {
@@ -47,7 +47,7 @@
     "example:staged": "tsx src/examples/run.ts --staged"
   },
   "peerDependencies": {
-    "@lifi/compose-spec": "0.7.1"
+    "@lifi/compose-spec": "0.8.1"
   },
   "dependencies": {
     "abitype": "^1.2.3",

package/src/examples/run.ts

@@ -38,6 +38,8 @@
  *   transfer          — transfer full token balance to a recipient
  *   partial-transfer  — transfer a specific amount, keeping the remainder
  *   untyped-ref       — mix untypedOp with typed handles via raw.ref
+ *   uniswap-v2-add    — split USDC, swap half to WETH, add both to the Uniswap V2 pair
+ *   uniswap-v3-mint   — open a full-range Uniswap V3 USDC/WETH position
  *   route-exact       — wrap 0.1 native ETH into WETH via /compose/route
  *   route-all         — unwrap the whole WETH balance to ETH via /compose/route
  *   supported-chains  — list the chains this deployment supports, and guard on them
@@ -83,6 +85,8 @@ import { buildSwapWithAllowRevertExample } from './swapWithAllowRevert.js';
 import { buildSwapWithBalanceCheck } from './swapWithBalanceCheck.js';
 import { buildSwapWithOutputValidation } from './swapWithOutputValidation.js';
 import { buildPartialTransfer, buildTransferTokens } from './transferTokens.js';
+import { buildUniswapV2AddLiquidity } from './uniswapV2AddLiquidity.js';
+import { buildUniswapV3Mint } from './uniswapV3Mint.js';
 import { buildUntypedOpWithTypedRef } from './untypedOpWithTypedRef.js';
 
 const stringifyJson = (value: unknown) =>
@@ -196,6 +200,15 @@ const EXAMPLES: Record<string, () => ComposeCompileRequest> = {
       amount: '1000000000',
     }).request,
   'untyped-ref': () => buildUntypedOpWithTypedRef({ owner: OWNER }).request,
+  'uniswap-v2-add': () =>
+    buildUniswapV2AddLiquidity({ owner: OWNER, usdcAmount: '1000000000' })
+      .request,
+  'uniswap-v3-mint': () =>
+    buildUniswapV3Mint({
+      owner: OWNER,
+      usdcAmount: '1000000000',
+      wethAmount: '400000000000000000',
+    }).request,
 };
 
 // `/compose/route` examples build a `ComposeRouteRequest` and go to

package/src/examples/uniswapV2AddLiquidity.ts

@@ -0,0 +1,106 @@
+import type { ComposeCompileRequest, Flow } from '@lifi/compose-spec';
+
+import {
+  createComposeSdk,
+  guards,
+  materialisers,
+  resources,
+} from '../index.js';
+import type { Address } from '../types.js';
+
+import { API_KEY, BASE_URL } from './config.js';
+
+// Ethereum mainnet (chainId 1).
+const USDC = '0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48';
+const WETH = '0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2';
+const UNISWAP_V2_ROUTER = '0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D';
+const UNISWAP_V2_FACTORY = '0x5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f';
+const USDC_WETH_PAIR = '0xB4e16d0168e52d35CaCD2c6185b44281Ec28C9Dc';
+
+// Tolerance of the swap leg: the aggregator's `toAmountMin` lets the swap
+// deliver up to 3% less WETH than quoted.
+const SWAP_SLIPPAGE = 0.03;
+
+export interface UniswapV2AddLiquidityInput {
+  readonly owner: Address;
+  readonly usdcAmount: `${bigint}`;
+}
+
+/**
+ * Deposit USDC alone into the Uniswap V2 USDC/WETH pair.
+ *
+ * - `core.split` halves the USDC input.
+ * - `lifi.swap` turns one half into WETH.
+ * - `uniswapV2.addLiquidity` deposits the other USDC half and the swapped
+ *   WETH, minting the UNI-V2 LP token. Unused input comes back as residuals.
+ * - The request sweeps the LP token and the residuals to the signer.
+ */
+export const buildUniswapV2AddLiquidity = ({
+  owner,
+  usdcAmount,
+}: UniswapV2AddLiquidityInput): {
+  flow: Flow;
+  request: ComposeCompileRequest;
+} => {
+  const sdk = createComposeSdk({ baseUrl: BASE_URL, apiKey: API_KEY });
+
+  const builder = sdk.flow(1, {
+    name: 'uniswap-v2-add-liquidity-usdc-weth',
+    inputs: {
+      usdcIn: resources.erc20(USDC, 1),
+    },
+  });
+
+  const { a: usdcHalf, b: usdcToSwap } = builder.core.split('split', {
+    bind: { source: builder.inputs.usdcIn },
+    config: { bps: 5000 },
+  });
+
+  const swap = builder.lifi.swap('swap', {
+    bind: { amountIn: usdcToSwap },
+    config: {
+      resourceOut: resources.erc20(WETH, 1),
+      slippage: SWAP_SLIPPAGE,
+    },
+  });
+
+  builder.uniswapV2.addLiquidity('add-liquidity', {
+    bind: {
+      tokenA: usdcHalf,
+      tokenB: swap.amountOut,
+    },
+    config: {
+      router: UNISWAP_V2_ROUTER,
+      factory: UNISWAP_V2_FACTORY,
+      pair: USDC_WETH_PAIR,
+    },
+    guards: [
+      // The router is called with zero minimums, so this band is the sandwich
+      // protection: it reverts unless the pool price read before the deposit
+      // stays within ±50 bps of the simulated price. It does not depend on the
+      // swap leg.
+      guards.band({ port: 'poolPrice', bps: 50 }),
+      // A swap that fills at its 3% minimum delivers less WETH, so the add
+      // mints less LP. The floor must cover that tolerance (300 bps) plus the
+      // 50 bps band, or a valid swap fill reverts the transaction.
+      guards.slippage({ port: 'liquidity', bps: 350 }),
+    ],
+  });
+
+  const flow = builder.build();
+
+  const request = sdk.request(flow, {
+    signer: owner,
+    inputs: {
+      usdcIn: materialisers.directDeposit({ amount: usdcAmount }),
+    },
+    // Sweep the LP token and the unused USDC/WETH back to the signer.
+    sweepTo: builder.context.sender,
+    // The UNI-V2 LP token is unpriced, so the default 500 bps price-impact
+    // check reads the deposit as a 100% loss. 0 skips the check; the `band`
+    // and `slippage` guards above are the protection.
+    maxPriceImpactBps: 0,
+  });
+
+  return { flow, request };
+};

package/src/examples/uniswapV3Mint.ts

@@ -0,0 +1,95 @@
+import type { ComposeCompileRequest, Flow } from '@lifi/compose-spec';
+
+import {
+  createComposeSdk,
+  guards,
+  materialisers,
+  resources,
+} from '../index.js';
+import type { Address } from '../types.js';
+
+import { API_KEY, BASE_URL } from './config.js';
+
+// Uniswap V3 USDC/WETH 0.05% pool on Ethereum mainnet (chainId 1).
+const USDC = '0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48';
+const WETH = '0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2';
+const POSITION_MANAGER = '0xC36442b4a4522E871399CD717aBDD847Ab11FE88';
+const FACTORY = '0x1F98431c8aD98523631AE4a59f267346ea31F984';
+const USDC_WETH_500_POOL = '0x88e6A0c2dDD26FEEb64F039a2c41296FcB3f5640';
+// Full range: the widest ticks that are multiples of the pool's tick spacing (10).
+const TICK_LOWER = -887270;
+const TICK_UPPER = 887270;
+
+export interface UniswapV3MintInput {
+  readonly owner: Address;
+  readonly usdcAmount: `${bigint}`;
+  readonly wethAmount: `${bigint}`;
+}
+
+/**
+ * Open a full-range Uniswap V3 USDC/WETH position on Ethereum mainnet.
+ *
+ * - `uniswapV3.mint` deposits the proxy's USDC and WETH and mints the
+ *   position NFT straight to the signer.
+ * - Unused USDC or WETH comes back as residuals, swept to the signer.
+ */
+export const buildUniswapV3Mint = ({
+  owner,
+  usdcAmount,
+  wethAmount,
+}: UniswapV3MintInput): {
+  flow: Flow;
+  request: ComposeCompileRequest;
+} => {
+  const sdk = createComposeSdk({ baseUrl: BASE_URL, apiKey: API_KEY });
+
+  const builder = sdk.flow(1, {
+    name: 'uniswap-v3-mint-usdc-weth',
+    inputs: {
+      usdc: resources.erc20(USDC, 1),
+      weth: resources.erc20(WETH, 1),
+    },
+  });
+
+  builder.uniswapV3.mint('mint', {
+    bind: {
+      tokenA: builder.inputs.usdc,
+      tokenB: builder.inputs.weth,
+      recipient: builder.context.sender,
+    },
+    config: {
+      positionManager: POSITION_MANAGER,
+      factory: FACTORY,
+      pool: USDC_WETH_500_POOL,
+      fee: 500,
+      tickLower: TICK_LOWER,
+      tickUpper: TICK_UPPER,
+    },
+    guards: [
+      // Bound the pool price before the deposit; N bps on the sqrt price
+      // allows about 2N bps of price movement, so this caps it near 50 bps.
+      guards.band({ port: 'sqrtPriceX96', bps: 25 }),
+      // Floor the minted liquidity. Liquidity is a handle, not a resource,
+      // so no minimum appears in the response.
+      guards.slippage({ port: 'liquidity', bps: 50 }),
+    ],
+  });
+
+  const flow = builder.build();
+
+  const request = sdk.request(flow, {
+    signer: owner,
+    inputs: {
+      usdc: materialisers.directDeposit({ amount: usdcAmount }),
+      weth: materialisers.directDeposit({ amount: wethAmount }),
+    },
+    // Return unused USDC or WETH to the signer.
+    sweepTo: builder.context.sender,
+    // The position NFT is not a resource, so only the residuals count as
+    // output and the default price-impact check would read a full loss.
+    // 0 skips the check; the band and slippage guards protect the deposit.
+    maxPriceImpactBps: 0,
+  });
+
+  return { flow, request };
+};

package/src/generated/config.generated.ts

@@ -1170,44 +1170,6 @@ export interface LifiFlashloanRepayConfig {
   fee?: string;
 }
 
-export type ContinuationAssertReadyConfig =
-  | {
-      kind: 'erc20BalanceGte';
-      chainId: Positive;
-      /**
-       * EVM address: 0x followed by 40 hex characters
-       */
-      token: Address;
-      /**
-       * EVM address: 0x followed by 40 hex characters
-       */
-      owner: Address;
-      minAmount: string;
-    }
-  | {
-      kind: 'nativeBalanceGte';
-      chainId: Positive;
-      /**
-       * EVM address: 0x followed by 40 hex characters
-       */
-      owner: Address;
-      minAmount: string;
-    }
-  | {
-      kind: 'call';
-      chainId: Positive;
-      /**
-       * EVM address: 0x followed by 40 hex characters
-       */
-      to: string;
-      /**
-       * Hex bytes: 0x followed by an even number of hex characters
-       */
-      calldata: string;
-      comparator: 'gte' | 'eq' | 'lte';
-      value: string;
-    };
-
 export interface LifiZapConfig {
   resourceOut:
     | {
@@ -1305,6 +1267,83 @@ export interface FlySwapConfig {
   maxSlippageBps?: Between05000;
 }
 
+export interface UniswapV2AddLiquidityConfig {
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  router: string;
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  factory: string;
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  pair: string;
+}
+
+export interface UniswapV2RemoveLiquidityConfig {
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  router: string;
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  factory: string;
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  tokenA: string;
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  tokenB: string;
+}
+
+/**
+ * a number between 0 and 999999
+ */
+export type Between0999999 = number;
+/**
+ * a number between -887272 and 887272
+ */
+export type Between887272887272 = number;
+
+export interface UniswapV3MintConfig {
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  positionManager: string;
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  factory: string;
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  pool: string;
+  fee: Between0999999;
+  tickLower: Between887272887272;
+  tickUpper: Between887272887272;
+}
+
+export interface UniswapV3IncreaseLiquidityConfig {
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  positionManager: string;
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  factory: string;
+  /**
+   * EVM address: 0x followed by 40 hex characters
+   */
+  pool: string;
+  tokenId: string;
+}
+
 export interface SlippageGuardConfig {
   port: string;
   bps: Between010000;
@@ -1316,6 +1355,11 @@ export interface CoreNumericInvariantGuardConfig {
   threshold: IntegerStringInput;
 }
 
+export interface BandGuardConfig {
+  port: string;
+  bps: Between010000;
+}
+
 export interface BalanceOfMaterialiserConfig {
   /**
    * EVM address: 0x followed by 40 hex characters

package/src/generated/guards.generated.ts

@@ -4,6 +4,7 @@
 import type { TypedGuard } from '../types.js';
 
 import type {
+  BandGuardConfig,
   CoreNumericInvariantGuardConfig,
   SlippageGuardConfig,
 } from './config.generated.js';
@@ -23,3 +24,11 @@ export const coreNumericInvariant = <P extends string>(
   kind: 'core.numericInvariant',
   ...config,
 });
+
+/** Assert that an output stays within a tolerance in basis points of its simulated value, in both directions */
+export const band = <P extends string>(
+  config: Omit<BandGuardConfig, 'port'> & { port: P },
+): TypedGuard<P> => ({
+  kind: 'band',
+  ...config,
+});

package/src/generated/operations.generated.ts

@@ -64,6 +64,10 @@ import type {
   MorphoBlueWithdrawCollateralConfig,
   MorphoBlueWithdrawConfig,
   ParaswapBuyConfig,
+  UniswapV2AddLiquidityConfig,
+  UniswapV2RemoveLiquidityConfig,
+  UniswapV3IncreaseLiquidityConfig,
+  UniswapV3MintConfig,
 } from './config.generated.js';
 
 /** Split a resource into two outputs by basis-point ratio. Output `a` receives `bps` of the source, rounded up, and `b` takes the remainder. */
@@ -654,6 +658,53 @@ export interface FlySwapArgs {
   readonly guards?: readonly TypedGuard<'unspentIn'>[];
 }
 
+/** Deposit two ERC-20 tokens into an existing Uniswap V2 pair (or an ABI-identical fork such as SushiSwap V2) through its Router02 and receive the pair's LP token; unused input returns as residuals. Asserts on chain that the router's factory is `factory`, that the factory's pair for the two tokens is `pair`, and that the pair holds non-zero reserves. Exposes the pool price read before the deposit as `poolPrice`. The deposit is protected only with a `band` guard on `poolPrice` and a `slippage` guard on `liquidity`. Fee-on-transfer tokens are unsupported. */
+export interface UniswapV2AddLiquidityArgs {
+  readonly bind: {
+    readonly tokenA: Bindable<'resource'>;
+    readonly tokenB: Bindable<'resource'>;
+  };
+  readonly config: UniswapV2AddLiquidityConfig;
+  readonly guards?: readonly TypedGuard<
+    'liquidity' | 'residualA' | 'residualB' | 'poolPrice'
+  >[];
+}
+
+/** Burn a Uniswap V2 LP token (or one of an ABI-identical fork such as SushiSwap V2) through its Router02 and receive both underlying tokens. Asserts on chain that the router's factory is `factory` and that the factory's pair for `tokenA`/`tokenB` is the input LP token. The withdrawal is protected only with a `slippage` guard on each of `tokenA` and `tokenB`. Fee-on-transfer tokens are unsupported: the outputs are the amounts the router reports, which would overstate what such a token delivers. */
+export interface UniswapV2RemoveLiquidityArgs {
+  readonly bind: {
+    readonly liquidity: Bindable<'resource'>;
+  };
+  readonly config: UniswapV2RemoveLiquidityConfig;
+  readonly guards?: readonly TypedGuard<'tokenA' | 'tokenB'>[];
+}
+
+/** Open a Uniswap V3 concentrated-liquidity position (or one on an ABI-identical fork) for a tick range, minting the position NFT straight to `recipient`, which must not be the execution address. Exposes the new `tokenId`; unused input comes back as residuals. The deposit is protected only with a `band` guard on `sqrtPriceX96` (read before the deposit) and a `slippage` guard on `liquidity`; a band of N bps on `sqrtPriceX96` allows about 2N bps of price movement. Fee-on-transfer tokens are unsupported. */
+export interface UniswapV3MintArgs {
+  readonly bind: {
+    readonly tokenA: Bindable<'resource'>;
+    readonly tokenB: Bindable<'resource'>;
+    readonly recipient: Bindable<'address'>;
+  };
+  readonly config: UniswapV3MintConfig;
+  readonly guards?: readonly TypedGuard<
+    'tokenId' | 'liquidity' | 'sqrtPriceX96' | 'residualA' | 'residualB'
+  >[];
+}
+
+/** Add two tokens to an existing Uniswap V3 position (or one on an ABI-identical fork). `owner` must own `tokenId`, and the position must hold the two input tokens; both are asserted on chain, since the position manager checks neither. Unused input comes back as residuals. The deposit is protected only with a `band` guard on `sqrtPriceX96` (read before the deposit) and a `slippage` guard on `liquidity`; a band of N bps on `sqrtPriceX96` allows about 2N bps of price movement. Fee-on-transfer tokens are unsupported. */
+export interface UniswapV3IncreaseLiquidityArgs {
+  readonly bind: {
+    readonly tokenA: Bindable<'resource'>;
+    readonly tokenB: Bindable<'resource'>;
+    readonly owner: Bindable<'address'>;
+  };
+  readonly config: UniswapV3IncreaseLiquidityConfig;
+  readonly guards?: readonly TypedGuard<
+    'liquidity' | 'sqrtPriceX96' | 'residualA' | 'residualB'
+  >[];
+}
+
 export interface CoreSplitOutputs {
   readonly a: OutputHandle<'resource'>;
   readonly b: OutputHandle<'resource'>;
@@ -807,6 +858,33 @@ export interface FlySwapOutputs {
   readonly unspentIn: OutputHandle<'resource'>;
 }
 
+export interface UniswapV2AddLiquidityOutputs {
+  readonly liquidity: OutputHandle<'resource'>;
+  readonly residualA: OutputHandle<'resource'>;
+  readonly residualB: OutputHandle<'resource'>;
+  readonly poolPrice: OutputHandle<'uint256'>;
+}
+
+export interface UniswapV2RemoveLiquidityOutputs {
+  readonly tokenA: OutputHandle<'resource'>;
+  readonly tokenB: OutputHandle<'resource'>;
+}
+
+export interface UniswapV3MintOutputs {
+  readonly tokenId: OutputHandle<'uint256'>;
+  readonly liquidity: OutputHandle<'uint256'>;
+  readonly sqrtPriceX96: OutputHandle<'uint256'>;
+  readonly residualA: OutputHandle<'resource'>;
+  readonly residualB: OutputHandle<'resource'>;
+}
+
+export interface UniswapV3IncreaseLiquidityOutputs {
+  readonly liquidity: OutputHandle<'uint256'>;
+  readonly sqrtPriceX96: OutputHandle<'uint256'>;
+  readonly residualA: OutputHandle<'resource'>;
+  readonly residualB: OutputHandle<'resource'>;
+}
+
 export type GeneratedOps = {
   readonly core: {
     /** Split a resource into two outputs by basis-point ratio. Output `a` receives `bps` of the source, rounded up, and `b` takes the remainder. — original id: "core.split" */
@@ -1060,6 +1138,30 @@ export type GeneratedOps = {
     /** Swap via Fly's DexAggregator, sized at runtime: the router calldata leaves `amountIn` unset, so an upstream op's output can feed the swap without being known at plan time. Either leg may be the chain-native coin. — original id: "fly.swap" */
     readonly swap: (nodeId: string, args: FlySwapArgs) => FlySwapOutputs;
   };
+  readonly uniswapV2: {
+    /** Deposit two ERC-20 tokens into an existing Uniswap V2 pair (or an ABI-identical fork such as SushiSwap V2) through its Router02 and receive the pair's LP token; unused input returns as residuals. Asserts on chain that the router's factory is `factory`, that the factory's pair for the two tokens is `pair`, and that the pair holds non-zero reserves. Exposes the pool price read before the deposit as `poolPrice`. The deposit is protected only with a `band` guard on `poolPrice` and a `slippage` guard on `liquidity`. Fee-on-transfer tokens are unsupported. — original id: "uniswapV2.addLiquidity" */
+    readonly addLiquidity: (
+      nodeId: string,
+      args: UniswapV2AddLiquidityArgs,
+    ) => UniswapV2AddLiquidityOutputs;
+    /** Burn a Uniswap V2 LP token (or one of an ABI-identical fork such as SushiSwap V2) through its Router02 and receive both underlying tokens. Asserts on chain that the router's factory is `factory` and that the factory's pair for `tokenA`/`tokenB` is the input LP token. The withdrawal is protected only with a `slippage` guard on each of `tokenA` and `tokenB`. Fee-on-transfer tokens are unsupported: the outputs are the amounts the router reports, which would overstate what such a token delivers. — original id: "uniswapV2.removeLiquidity" */
+    readonly removeLiquidity: (
+      nodeId: string,
+      args: UniswapV2RemoveLiquidityArgs,
+    ) => UniswapV2RemoveLiquidityOutputs;
+  };
+  readonly uniswapV3: {
+    /** Open a Uniswap V3 concentrated-liquidity position (or one on an ABI-identical fork) for a tick range, minting the position NFT straight to `recipient`, which must not be the execution address. Exposes the new `tokenId`; unused input comes back as residuals. The deposit is protected only with a `band` guard on `sqrtPriceX96` (read before the deposit) and a `slippage` guard on `liquidity`; a band of N bps on `sqrtPriceX96` allows about 2N bps of price movement. Fee-on-transfer tokens are unsupported. — original id: "uniswapV3.mint" */
+    readonly mint: (
+      nodeId: string,
+      args: UniswapV3MintArgs,
+    ) => UniswapV3MintOutputs;
+    /** Add two tokens to an existing Uniswap V3 position (or one on an ABI-identical fork). `owner` must own `tokenId`, and the position must hold the two input tokens; both are asserted on chain, since the position manager checks neither. Unused input comes back as residuals. The deposit is protected only with a `band` guard on `sqrtPriceX96` (read before the deposit) and a `slippage` guard on `liquidity`; a band of N bps on `sqrtPriceX96` allows about 2N bps of price movement. Fee-on-transfer tokens are unsupported. — original id: "uniswapV3.increaseLiquidity" */
+    readonly increaseLiquidity: (
+      nodeId: string,
+      args: UniswapV3IncreaseLiquidityArgs,
+    ) => UniswapV3IncreaseLiquidityOutputs;
+  };
 };
 
 export const bindGeneratedOps = (
@@ -1359,4 +1461,35 @@ export const bindGeneratedOps = (
         unspentIn: 'resource',
       } as const),
   },
+  uniswapV2: {
+    addLiquidity: (nodeId: string, args: UniswapV2AddLiquidityArgs) =>
+      builder.call(nodeId, 'uniswapV2.addLiquidity', args, {
+        liquidity: 'resource',
+        residualA: 'resource',
+        residualB: 'resource',
+        poolPrice: 'uint256',
+      } as const),
+    removeLiquidity: (nodeId: string, args: UniswapV2RemoveLiquidityArgs) =>
+      builder.call(nodeId, 'uniswapV2.removeLiquidity', args, {
+        tokenA: 'resource',
+        tokenB: 'resource',
+      } as const),
+  },
+  uniswapV3: {
+    mint: (nodeId: string, args: UniswapV3MintArgs) =>
+      builder.call(nodeId, 'uniswapV3.mint', args, {
+        tokenId: 'uint256',
+        liquidity: 'uint256',
+        sqrtPriceX96: 'uint256',
+        residualA: 'resource',
+        residualB: 'resource',
+      } as const),
+    increaseLiquidity: (nodeId: string, args: UniswapV3IncreaseLiquidityArgs) =>
+      builder.call(nodeId, 'uniswapV3.increaseLiquidity', args, {
+        liquidity: 'uint256',
+        sqrtPriceX96: 'uint256',
+        residualA: 'resource',
+        residualB: 'resource',
+      } as const),
+  },
 });

package/src/index.ts

@@ -99,11 +99,8 @@ export type {
   Erc20AllowanceRequirement,
   ContinuationIntent,
   ContinuationOutcome,
-  Check,
-  CheckComparator,
   SettlementWire,
   SettlementEscrowWire,
-  ContinuationPlanWire,
 } from '@lifi/compose-spec';
 export {
   SIMULATE_MAX_TRACKED_BALANCES,