@libraz/libsonare 1.7.2 → 1.8.1

package/src/realtime_voice_changer.ts

@@ -48,6 +48,7 @@ export interface RealtimeVoiceChangerPlanarBuffer {
 
 export class RealtimeVoiceChanger {
   private changer: import('./sonare.js').WasmRealtimeVoiceChanger;
+  private released = false;
 
   /**
    * Creates a voice changer. Supplying `sampleRate` prepares it immediately,
@@ -63,7 +64,21 @@ export class RealtimeVoiceChanger {
     const module = getSonareModule();
     this.changer = module.createRealtimeVoiceChanger(config as Record<string, unknown> | string);
     if (sampleRate !== undefined) {
-      this.changer.prepare(sampleRate, maxBlockSize, channels);
+      // `prepare` rejects a non-positive sample rate, a negative block size and
+      // a channel count outside [1, 2]. The handle is already allocated by
+      // then, and a throwing constructor leaves `this` unreachable, so release
+      // it here — embind has no GC finalizer, and a device-change handler that
+      // retries on failure would otherwise leak one whole DSP chain per attempt
+      // (retune ring, ISP limiter, reverb, scratch).
+      let prepared = false;
+      try {
+        this.changer.prepare(sampleRate, maxBlockSize, channels);
+        prepared = true;
+      } finally {
+        if (!prepared) {
+          this.changer.delete();
+        }
+      }
     }
   }
 
@@ -98,6 +113,35 @@ export class RealtimeVoiceChanger {
     return this.changer.latencySamples();
   }
 
+  /**
+   * Channel-blocks in which the chain discarded its own state because a
+   * non-finite value had reached it.
+   *
+   * Advisory telemetry, and the only thing that separates a degraded stream
+   * from a clean one. Every stage of this chain leaves an in-domain finite
+   * value where a non-finite one was — the input scrub and the
+   * inter-sample-peak limiter substitute silence, the sample-domain limiter
+   * folds an infinity onto its ceiling — so the output stays finite, in range
+   * and free of any error while carrying samples unrelated to the input. A
+   * non-zero count is what says the samples in between were not computed from
+   * what you supplied.
+   *
+   * Monotonic for the lifetime of the instance. The unit is one processed
+   * block, never a channel, so a stereo block that discards on both channels
+   * adds one and the number does not depend on a dimension you did not choose.
+   *
+   * @example
+   * ```ts
+   * changer.processInterleaved(block, 2);
+   * if (changer.nonFiniteDiscardCount() > 0) {
+   *   // the audio just produced is not a function of `block`
+   * }
+   * ```
+   */
+  nonFiniteDiscardCount(): number {
+    return this.changer.nonFiniteDiscardCount();
+  }
+
   /**
    * Monotonically increases whenever {@link prepare} can replace the native
    * scratch buffers. Cached WASM heap views must be reacquired after it changes.
@@ -303,9 +347,19 @@ export class RealtimeVoiceChanger {
     };
   }
 
+  /** Releases the native handle. Idempotent, as the Node facade is. */
   delete(): void {
+    if (this.released) {
+      return;
+    }
+    this.released = true;
     this.changer.delete();
   }
+
+  /** Alias for {@link delete}, provided for cross-binding (Node) compatibility. */
+  destroy(): void {
+    this.delete();
+  }
 }
 
 export function realtimeVoiceChangerPresetNames(): VoicePresetId[] {

package/src/repair_dereverb.ts

@@ -0,0 +1,299 @@
+/**
+ * Reverberation repair, with its detector and the room-driven configuration.
+ */
+
+import { getSonareModule } from './module_state';
+import type { RoomEstimateResult } from './public_types_acoustic';
+import type {
+  MasteringRepairDereverbClassicalLinkedResult,
+  MasteringRepairDereverbClassicalStereoResult,
+  ReverbDetection,
+} from './public_types_repair';
+
+function requireModule() {
+  return getSonareModule();
+}
+
+/** Options for `masteringRepairDereverbClassical`. */
+export interface DereverbClassicalOptions {
+  threshold?: number;
+  attenuation?: number;
+  nFft?: number;
+  hopLength?: number;
+  t60Sec?: number;
+  lateDelayMs?: number;
+  overSubtraction?: number;
+  spectralFloor?: number;
+  wpeEnabled?: boolean;
+  wpeIterations?: number;
+  wpeTaps?: number;
+  wpeStrength?: number;
+}
+
+export interface MasteringRepairDereverbClassicalRequest extends DereverbClassicalOptions {
+  samples: Float32Array;
+  sampleRate: number;
+}
+
+/** Request form of `masteringRepairDereverbClassicalStereo`. */
+export interface MasteringRepairDereverbClassicalStereoRequest extends DereverbClassicalOptions {
+  left: Float32Array;
+  right: Float32Array;
+  sampleRate?: number;
+}
+
+/** Request form of `masteringRepairDereverbClassicalLinked`. */
+export interface MasteringRepairDereverbClassicalLinkedRequest extends DereverbClassicalOptions {
+  /** At least one channel; all the same length. */
+  channels: Float32Array[];
+  sampleRate?: number;
+}
+
+/** Request form of `masteringRepairDereverbConfigForRoom`. */
+export interface MasteringRepairDereverbConfigForRoomRequest extends DereverbClassicalOptions {
+  /** The measured room, from `estimateRoom`. Only `volume` and `rt60Bands` are read. */
+  estimate: RoomEstimateResult;
+}
+
+/** Offline classical dereverberator (spectral subtraction + optional WPE). */
+export function masteringRepairDereverbClassical(
+  request: MasteringRepairDereverbClassicalRequest,
+): Float32Array;
+export function masteringRepairDereverbClassical(
+  samples: Float32Array,
+  sampleRate: number,
+  options?: DereverbClassicalOptions,
+): Float32Array;
+export function masteringRepairDereverbClassical(
+  samples: Float32Array | MasteringRepairDereverbClassicalRequest,
+  sampleRate?: number,
+  options: DereverbClassicalOptions = {},
+): Float32Array {
+  const request =
+    samples instanceof Float32Array
+      ? { samples, sampleRate: sampleRate as number, ...options }
+      : samples;
+  return requireModule().masteringRepairDereverbClassical(
+    request.samples,
+    request.sampleRate,
+    request,
+  );
+}
+
+/**
+ * Offline classical dereverberator for a stereo pair (spectral subtraction plus an optional
+ * WPE pre-stage), driven by one channel-linked mask.
+ *
+ * The mask is built from the channel-summed power, and the WPE stage accumulates over both
+ * channels and applies one predictor set to each, so neither stage can move an interchannel
+ * level or phase difference. That is also why the result carries a single `report` rather than
+ * one per channel.
+ *
+ * Every field of that report is a ratio or a fraction, so unlike the denoise pair nothing in
+ * it shifts with the channel count: a stereo figure here is comparable against a mono one.
+ *
+ * An input shorter than `nFft` is PADDED for analysis rather than rejected, the opposite of
+ * {@link masteringRepairDenoiseClassicalStereo}.
+ *
+ * Two report fields are gated on the WPE stage, which is off unless `wpeEnabled` is set:
+ * `detected.latePredictability` and `wpePredictorNorm` are then both exactly 0, which is the
+ * measurement rather than an unset field. `detected.lateDecayRatioDb` runs the other way from
+ * what its name suggests — less negative means the material sustains across the module's late
+ * lag, so a reverberant input reads *higher* than the same material dry.
+ *
+ * `threshold` and `attenuation` are both validated to `[0, 1]`, so the strongest gate this
+ * accepts is `threshold: 0.99`, not an arbitrarily large number.
+ *
+ * @example
+ * ```ts
+ * const { left, right, report } = masteringRepairDereverbClassicalStereo({
+ *   left: leftSamples,
+ *   right: rightSamples,
+ *   sampleRate: 48000,
+ *   wpeEnabled: true,
+ * });
+ * console.log(report.detected.lateDecayRatioDb, report.wpePredictorNorm);
+ * ```
+ */
+export function masteringRepairDereverbClassicalStereo(
+  request: MasteringRepairDereverbClassicalStereoRequest,
+): MasteringRepairDereverbClassicalStereoResult;
+export function masteringRepairDereverbClassicalStereo(
+  left: Float32Array,
+  right: Float32Array,
+  sampleRate: number,
+  config?: DereverbClassicalOptions,
+): MasteringRepairDereverbClassicalStereoResult;
+export function masteringRepairDereverbClassicalStereo(
+  left: Float32Array | MasteringRepairDereverbClassicalStereoRequest,
+  right?: Float32Array,
+  sampleRate?: number,
+  config: DereverbClassicalOptions = {},
+): MasteringRepairDereverbClassicalStereoResult {
+  const request: MasteringRepairDereverbClassicalStereoRequest =
+    left instanceof Float32Array
+      ? { left, right: right as Float32Array, sampleRate, ...config }
+      : left;
+  const { left: leftSamples, right: rightSamples, sampleRate: rate, ...options } = request;
+  return requireModule().masteringRepairDereverbClassicalStereo(
+    leftSamples,
+    rightSamples,
+    rate ?? 22050,
+    options,
+  );
+}
+
+/**
+ * Offline classical dereverberator for any number of channels (spectral subtraction plus an
+ * optional WPE pre-stage), driven by one channel-linked mask.
+ *
+ * The N-channel form of {@link masteringRepairDereverbClassicalStereo}: the mask is built from
+ * the channel-summed power and the WPE stage accumulates over every channel and applies one
+ * predictor set to each, so neither stage can move an interchannel level or phase difference
+ * however many channels there are. One `report` for the set, and one output per input channel in
+ * input order.
+ *
+ * A single channel reproduces {@link masteringRepairDereverbClassical} bit for bit, and two
+ * reproduce {@link masteringRepairDereverbClassicalStereo} plane for plane — `channels[0]` is the
+ * left plane and `channels[1]` the right.
+ *
+ * Every field of the report is a ratio or a fraction, so nothing in it shifts with the channel
+ * count: a figure measured over a set is comparable against a mono one. That is the opposite of
+ * {@link masteringRepairDenoiseClassicalLinked}, whose `detected` levels are absolute and move by
+ * `10*log10(N)`.
+ *
+ * An input shorter than `nFft` is PADDED for analysis rather than rejected — again the opposite
+ * of that entry, which refuses one.
+ *
+ * Two report fields are gated on the WPE stage, which is off unless `wpeEnabled` is set:
+ * `detected.latePredictability` and `wpePredictorNorm` are then both exactly 0, which is the
+ * measurement rather than an unset field.
+ *
+ * @example
+ * ```ts
+ * const { channels, report } = masteringRepairDereverbClassicalLinked({
+ *   channels: [frontLeft, frontRight, centre],
+ *   sampleRate: 48000,
+ *   wpeEnabled: true,
+ * });
+ * console.log(channels.length, report.detected.lateDecayRatioDb);
+ * ```
+ */
+export function masteringRepairDereverbClassicalLinked(
+  request: MasteringRepairDereverbClassicalLinkedRequest,
+): MasteringRepairDereverbClassicalLinkedResult;
+export function masteringRepairDereverbClassicalLinked(
+  channels: Float32Array[],
+  sampleRate: number,
+  config?: DereverbClassicalOptions,
+): MasteringRepairDereverbClassicalLinkedResult;
+export function masteringRepairDereverbClassicalLinked(
+  channels: Float32Array[] | MasteringRepairDereverbClassicalLinkedRequest,
+  sampleRate?: number,
+  config: DereverbClassicalOptions = {},
+): MasteringRepairDereverbClassicalLinkedResult {
+  const request: MasteringRepairDereverbClassicalLinkedRequest = Array.isArray(channels)
+    ? { channels, sampleRate, ...config }
+    : channels;
+  const { channels: input, sampleRate: rate, ...options } = request;
+  return requireModule().masteringRepairDereverbClassicalLinked(input, rate ?? 22050, options);
+}
+
+/**
+ * Point a dereverb config at a measured room.
+ *
+ * The pair to {@link estimateRoom}, which measures a recording blind. Returns a complete
+ * config for {@link masteringRepairDereverbClassical}, so the caller does not have to know
+ * which reverberation-time band to use or how the late delay relates to room size.
+ *
+ * What the room decides is *where* the tail is. Exactly two fields come back changed from
+ * what was passed in:
+ *
+ * - `t60Sec` — the mid-frequency reverberation time, the average of the 500 Hz and 1 kHz
+ *   octaves an ISO 3382 room is quoted by.
+ * - `lateDelayMs` — Polack's mixing time, sqrt(volume) in milliseconds, past which the
+ *   response is a diffuse tail rather than separable early reflections.
+ *
+ * How *much* to remove is taste rather than measurement, so `attenuation`, `threshold`,
+ * `overSubtraction` and `spectralFloor` are never written. A measurement that did not
+ * converge leaves its own field alone, so a partial estimate still configures the half it
+ * measured; a low-`confidence` estimate is still applied, because whether to trust it is
+ * the caller's call.
+ *
+ * Every field of `config` that is omitted falls back to the library's own dereverb default,
+ * matching {@link masteringRepairDereverbClassical}, so calling this with only an estimate
+ * returns a config that is ready to run. The C ABI underneath reads and writes the whole
+ * config and takes every field literally — it has no "zero means default" rule — which is
+ * why an omitted field resolves to its default here rather than to zero.
+ *
+ * @param estimate - The measured room, from {@link estimateRoom}. Only `volume` and
+ *   `rt60Bands` are read. The request form carries it as `estimate` alongside the config
+ *   fields.
+ * @param config - The config to point at the room; omitted fields take the library default.
+ * @returns A complete dereverb config.
+ *
+ * @example
+ * ```ts
+ * const estimate = estimateRoom(samples, sampleRate);
+ * const config = masteringRepairDereverbConfigForRoom(estimate);
+ * const clean = masteringRepairDereverbClassical(samples, sampleRate, config);
+ * ```
+ *
+ * When NEITHER mid band converged, `t60Sec` falls back to the average of whatever
+ * bands did, so a low-band-only estimate configures something rather than nothing --
+ * that value is no longer a mid-frequency figure. Only `volume`, `rt60Bands` and the
+ * band count are read; the rest of the estimate is ignored.
+ */
+export function masteringRepairDereverbConfigForRoom(
+  request: MasteringRepairDereverbConfigForRoomRequest,
+): Required<DereverbClassicalOptions>;
+export function masteringRepairDereverbConfigForRoom(
+  estimate: RoomEstimateResult,
+  config?: DereverbClassicalOptions,
+): Required<DereverbClassicalOptions>;
+export function masteringRepairDereverbConfigForRoom(
+  estimate: RoomEstimateResult | MasteringRepairDereverbConfigForRoomRequest,
+  config: DereverbClassicalOptions = {},
+): Required<DereverbClassicalOptions> {
+  const request = 'estimate' in estimate ? estimate : { estimate, ...config };
+  return requireModule().masteringRepairDereverbConfigForRoom(request.estimate, request);
+}
+
+/** Request form of `masteringRepairDetectReverb`. */
+export interface MasteringRepairDetectReverbRequest extends DereverbClassicalOptions {
+  samples: Float32Array;
+  sampleRate: number;
+}
+
+/**
+ * Measures reverberation without dereverberating.
+ *
+ * NOT an ISO 3382 reverberation time — use `estimateRoom` for a graded RT60. This reports what
+ * {@link masteringRepairDereverbClassical} itself measures while deciding how much to subtract.
+ *
+ * A buffer shorter than `nFft` is PADDED for analysis, as the repair pads it, which is the
+ * opposite of {@link masteringRepairDetectNoiseFloor}.
+ *
+ * `latePredictability` comes from the WPE stage, which runs only under `wpeEnabled` — clear by
+ * default — and then only its covariance and solve; the prediction is never subtracted. A
+ * default-config call therefore reports exactly 0 there as its measurement.
+ */
+export function masteringRepairDetectReverb(
+  request: MasteringRepairDetectReverbRequest,
+): ReverbDetection;
+export function masteringRepairDetectReverb(
+  samples: Float32Array,
+  sampleRate: number,
+  options?: DereverbClassicalOptions,
+): ReverbDetection;
+export function masteringRepairDetectReverb(
+  samples: Float32Array | MasteringRepairDetectReverbRequest,
+  sampleRate?: number,
+  options: DereverbClassicalOptions = {},
+): ReverbDetection {
+  const request =
+    samples instanceof Float32Array
+      ? { samples, sampleRate: sampleRate as number, ...options }
+      : samples;
+  return requireModule().masteringRepairDetectReverb(request.samples, request.sampleRate, request);
+}