@ledvance/base 1.3.60 → 1.3.62

package/src/i18n/strings.ts

@@ -111,10 +111,10 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Cancelar",
         "btsolar_groups_inductionsync": "Sincronización de detección de movimiento",
         "btsolar_groups_inductionsync_description": "Sincronizar el sensor de movimiento de todas las lámparas para que, si una de ellas detecta un movimiento, las demás también se enciendan.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
-        "camera_edit_site_name": "Edit Site name",
-        "camera_errmsg_site_point_limit": "Failed to enable site patrol because less than 2 sites were added.",
+        "camera_calibration": "Calibración de cámara",
+        "camera_calibration_desc": "La calibración de la cámara tarda unos 25 segundos. ¿Desea continuar?",
+        "camera_edit_site_name": "Editar nombre del sitio",
+        "camera_errmsg_site_point_limit": "No se pudo habilitar la patrulla del sitio porque se agregaron menos de 2 sitios.",
         "camera_feature_1_headline": "Sirena",
         "camera_feature_2_headline": "Micrófono",
         "camera_feature_5_headline": "Grabaciones",
@@ -123,34 +123,34 @@ export default {
         "camera_local_recording": "Grabación local",
         "camera_mic_two_way_talking": "Llamando...",
         "camera_net_err": "La conexión del dispositivo está interrumpida, compruebe el dispositivo y su red",
-        "camera_operation_site_error": "Not editable in site patrol mode",
-        "camera_patrol": "Patrolling",
+        "camera_operation_site_error": "No se puede editar en el modo de patrulla in situ",
+        "camera_patrol": "Patrullando",
         "camera_patrol_cruise_time": "Cruise time：{0} - {1}",
-        "camera_patrol_enable": "Enable patrolling",
-        "camera_preset_point": "Preset Point",
+        "camera_patrol_enable": "Habilitar el patrullaje",
+        "camera_preset_point": "Punto preestablecido",
         "camera_private_mode_sleep": "Dispositivo en modo de reposo",
         "camera_private_mode_sleep_close": "Enciende la cámara",
         "camera_re_connect_stream": "Reconectando, por favor espera",
-        "camera_restart_device_dialog_content": "Are you sure that you want to restart the device?",
-        "camera_select_patrol_mode": "Select a patrolling mode",
-        "camera_select_patrol_mode_panoramic": "Panoramic patrolling",
-        "camera_select_patrol_mode_panoramic_desc": "Camera will patrol every angle",
-        "camera_select_patrol_mode_site": "Site patrolling",
-        "camera_select_patrol_mode_site_desc": "The camera will patrol all sites and stay at each site for 10s",
-        "camera_set_patrol_time": "Select a patrolling time",
-        "camera_set_patrol_time_all_day": "All-day patrolling",
-        "camera_set_patrol_time_all_day_desc": "Patrolling will continue for 24x7 hours",
-        "camera_set_patrol_time_timed": "Timed patrolling",
-        "camera_set_patrol_time_timed_desc": "Patrolling will take effect as scheduled",
-        "camera_settings_anti_dismantle_topic": "Anti dismantle alarm",
+        "camera_restart_device_dialog_content": "¿Está seguro de que desea reiniciar el dispositivo?",
+        "camera_select_patrol_mode": "Selecciona un modo de patrullaje",
+        "camera_select_patrol_mode_panoramic": "Patrullaje panorámico",
+        "camera_select_patrol_mode_panoramic_desc": "La cámara patrullará todos los ángulos",
+        "camera_select_patrol_mode_site": "Patrullaje del sitio",
+        "camera_select_patrol_mode_site_desc": "La cámara patrullará todos los sitios y permanecerá en cada sitio durante 10 segundos",
+        "camera_set_patrol_time": "Selecciona un tiempo de patrullaje",
+        "camera_set_patrol_time_all_day": "Patrullaje durante todo el día",
+        "camera_set_patrol_time_all_day_desc": "El patrullaje continuará durante 24 horas, 7 días a la semana",
+        "camera_set_patrol_time_timed": "Patrullaje cronometrado",
+        "camera_set_patrol_time_timed_desc": "El patrullaje se efectuará según lo programado",
+        "camera_settings_anti_dismantle_topic": "Alarma antidesmantelamiento",
         "camera_settings_anti_flicker_50hz": "50 Hz",
         "camera_settings_anti_flicker_60hz": "60 Hz",
-        "camera_settings_anti_flicker_topic": "Anti-flicker",
+        "camera_settings_anti_flicker_topic": "Antiparpadeo",
         "camera_settings_button_text": "Formato",
-        "camera_settings_device_restart": "Device restart",
+        "camera_settings_device_restart": "Reinicio del dispositivo",
         "camera_settings_format_sd_card_note": "Ten en cuenta que todos tus datos se borrarán y no se podrán recuperar",
         "camera_settings_format_sd_card_topic": "¿Realmente quieres formatear la tarjeta SD?",
-        "camera_settings_humanoid_focus_topic": "Humanoid focus",
+        "camera_settings_humanoid_focus_topic": "Enfoque humanoide",
         "camera_settings_night_vision_description": "Esta función permite captar imágenes en condiciones de poca luz u oscuridad. Esta función mejora la vigilancia, la seguridad y el conocimiento de la situación en diversas aplicaciones.",
         "camera_settings_night_vision_firstbox_topic1": "Automático",
         "camera_settings_night_vision_firstbox_topic1_description": "Activa la visión nocturna sólo cuando sea necesario",
@@ -164,13 +164,13 @@ export default {
         "camera_settings_night_vision_mode_topic": "Modo nocturno",
         "camera_settings_night_vision_topic": "Visión nocturna",
         "camera_settings_onvif_ip_topic": "IP",
-        "camera_settings_onvif_ip_type_dynamic": "Dynamic IP",
-        "camera_settings_onvif_ip_type_static": "Static IP",
-        "camera_settings_onvif_ip_type_topic": "Onvif mode",
-        "camera_settings_onvif_set_password_tips": "The device password supports 8-32 characters and must contain uppercase and lowercase letters as well as digits.",
-        "camera_settings_onvif_switch_topic": "Onvif switch",
+        "camera_settings_onvif_ip_type_dynamic": "IP dinámica",
+        "camera_settings_onvif_ip_type_static": "IP estática",
+        "camera_settings_onvif_ip_type_topic": "Modo Onvif",
+        "camera_settings_onvif_set_password_tips": "La contraseña del dispositivo admite entre 8 y 32 caracteres y debe contener letras mayúsculas y minúsculas, así como dígitos.",
+        "camera_settings_onvif_switch_topic": "Conmutador Onvif",
         "camera_settings_onvif_topic": "Onvif",
-        "camera_settings_power_management_settings_topic": "Power Management Settings",
+        "camera_settings_power_management_settings_topic": "Configuración de administración de energía",
         "camera_settings_recording_mode_firstbox_topic1": "Activado por movimiento",
         "camera_settings_recording_mode_firstbox_topic1_description": "Sólo grabará si se detecta un movimiento",
         "camera_settings_recording_mode_firstbox_topic2": "Continuo",
@@ -187,12 +187,12 @@ export default {
         "camera_settings_talk_mode_firstbox_option2_topic": "Comunicación bidireccional",
         "camera_settings_talk_mode_secondtopic": "El habla puede verse influida por el entorno. Según la situación, recomendamos la comunicación unidireccional o bidireccional.",
         "camera_settings_talk_mode_topic": "Modo de conversación",
-        "camera_site": "Site",
-        "camera_site_delete_dialog_title": "Do you really want to delete the site?",
-        "camera_site_name": "Site name",
-        "camera_site_overview_empty_button_add_text": "Add site",
-        "camera_site_overview_empty_information_text": "You have not added a site yet",
-        "camera_site_overview_warning_max_number_text": "Maximum number of sites has been reached",
+        "camera_site": "Sitio",
+        "camera_site_delete_dialog_title": "¿De verdad quieres eliminar el sitio?",
+        "camera_site_name": "Nombre del sitio",
+        "camera_site_overview_empty_button_add_text": "Agregar sitio",
+        "camera_site_overview_empty_information_text": "Aún no has añadido un sitio",
+        "camera_site_overview_warning_max_number_text": "Se ha alcanzado el número máximo de sitios",
         "camera_status_indicator": "Indicador de estado",
         "camera_tile_camera_button_label_photo": "Tomar una foto",
         "camera_tile_camera_button_label_video": "Grabar un video",
@@ -454,30 +454,30 @@ export default {
         "country_scotland": "Escocia",
         "country_selection_textfield_headline_search": "Búsqueda",
         "country_sy": "Siria",
-        "curation_calibration_callibrate_btn_text": "Calibrate",
-        "curation_calibration_nextbtn_text": "Next step",
+        "curation_calibration_callibrate_btn_text": "Calibrar",
+        "curation_calibration_nextbtn_text": "Próximo paso",
         "current_temp_humidity": "Temperatura y humedad actuales del suelo",
-        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
-        "curtain_calibration_progress_text": "Calibration in progress.....",
-        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_failed_text": "El proceso de calibración de la cortina inteligente falló.",
+        "curtain_calibration_progress_text": "Calibración en curso...",
+        "curtain_calibration_success_text": "El proceso de calibración de la cortina inteligente se realizó correctamente.",
         "curtain_calibration_tryagin_text": "Reintentar",
-        "curtain_control_headline_text": "Curtain",
-        "curtain_control_title": "Curtain control",
-        "curtain_fast_calibration": "Fast calibration",
-        "curtain_fast_calibration_step1": "1. Take a stop watch.\n\n2. Close the curtains fully.\n\n3. Open the curtains fully and measure the time with stop watch from fully close to fully open.\n\n4. Click on \"Next Step\" and enter rounded up integer of seconds you measured with stop watch.",
-        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain from fully closed to fully open.",
-        "curtain_fast_toast_text": "Fast calibration is just allowed when the curtain is fully closed at 0%.",
-        "curtain_intelligent_calibration": "Intelligent calibration",
-        "curtain_intelligent_calibration_step1": "Please note for intelligent calibration, you need a wall switch to fully open/close the curtain. If you are not using a wall switch, please use the fast calibration mode.\n\n1. Install the curtain motor correctly before calibration so that the curtain can be fully opened/closed.\n\n2. Click “Next Step”.",
-        "curtain_intelligent_calibration_step2": "1. Press the wall switch to open the curtain until it is fully open.\n\n2. Press the wall switch to close the curtain until it is fully closed.\n\n3. Once the steps in 1 and 2 are done, then click “Calibrate\".",
-        "curtain_motor_steering": "Motor steering",
-        "curtain_motor_steering1": "Forward direction",
-        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
-        "curtain_motor_steering2": "Backward direction",
-        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
-        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
-        "curtain_summary_action_txt_1": "Open",
-        "curtain_summary_action_txt_2": "Close",
+        "curtain_control_headline_text": "Cortina",
+        "curtain_control_title": "Control de cortinas",
+        "curtain_fast_calibration": "Calibración rápida",
+        "curtain_fast_calibration_step1": "1. Toma un cronómetro.\n\n2. Cierra las cortinas por completo.\n\n3. Abre las cortinas por completo y mide la hora con el cronómetro desde que están completamente cerca hasta que están completamente abiertas.\n\n4. Haga clic en «Siguiente paso» e introduzca el número entero redondeado de los segundos que midió con el cronómetro.",
+        "curtain_fast_calibration_step2": "Introduce el tiempo que tarda la cortina desde que está completamente cerrada hasta que está completamente abierta.",
+        "curtain_fast_toast_text": "Solo se permite una calibración rápida cuando la cortina está completamente cerrada al 0%.",
+        "curtain_intelligent_calibration": "Calibración inteligente",
+        "curtain_intelligent_calibration_step1": "Ten en cuenta que para una calibración inteligente, necesitas un interruptor de pared para abrir o cerrar completamente la cortina. Si no utilizas un interruptor de pared, utiliza el modo de calibración rápida.\n\n1. Instale el motor de la cortina correctamente antes de la calibración para que la cortina pueda abrirse o cerrarse por completo.\n\n2. Haga clic en «Siguiente paso».",
+        "curtain_intelligent_calibration_step2": "1. Pulsa el interruptor de pared para abrir la cortina hasta que esté completamente abierta.\n\n2. Pulsa el interruptor de pared para cerrar la cortina hasta que esté completamente cerrada.\n\n3. Una vez finalizados los pasos 1 y 2, haga clic en «Calibrar».",
+        "curtain_motor_steering": "Dirección motorizada",
+        "curtain_motor_steering1": "Dirección hacia adelante",
+        "curtain_motor_steering1_description": "El motor de la cortina funciona en dirección hacia adelante.",
+        "curtain_motor_steering2": "Dirección hacia atrás",
+        "curtain_motor_steering2_description": "El motor de la cortina funciona en dirección hacia atrás",
+        "curtain_motor_steering_tip": "Para configurar la dirección de dirección del motor de la cortina",
+        "curtain_summary_action_txt_1": "Abrir",
+        "curtain_summary_action_txt_2": "Cercano",
         "daily": "diario",
         "date": "Fecha",
         "date_type": "Tipo de fecha",
@@ -620,13 +620,13 @@ export default {
         "history_socket_headline_text": "Historia",
         "home_screen_home_dialog_yes_con": "Entendido",
         "humidity": "Humedad",
-        "hybrid_headline_text": "Hybrid switch",
-        "hybrid_switchstate_setting1": "Setting 1",
-        "hybrid_switchstate_setting2": "Setting 2",
-        "hybrid_switchstate_setting3": "Setting 3",
-        "hybrid_switchstate_setting3_description": "Switch button",
-        "hybrid_switchstate_setting_text": "Switch state setting",
-        "hybrid_switchstate_title": "Switch state",
+        "hybrid_headline_text": "Conmutador híbrido",
+        "hybrid_switchstate_setting1": "Configuración 1",
+        "hybrid_switchstate_setting2": "Configuración 2",
+        "hybrid_switchstate_setting3": "Configuración 3",
+        "hybrid_switchstate_setting3_description": "Botón de cambio",
+        "hybrid_switchstate_setting_text": "Configuración del estado del conmutador",
+        "hybrid_switchstate_title": "Estado del conmutador",
         "infobutton_totalenergy": "La energía total sólo muestra los datos totales de consumo/generación después de la última puesta a cero.\nLos datos se encendieron los días siguientes:",
         "intermittent_time": "Tiempo intermitente",
         "irrigation": "Riego",
@@ -770,16 +770,16 @@ export default {
         "motion_detection_add_time_schedule_headline_text": "Añadir un nuevo horario",
         "motion_detection_add_time_schedule_selectionfield_text": "Nombre",
         "motion_detection_add_time_schedule_system_back_text": "Programación horaria",
-        "motion_detection_alarm_interval": "Alarm Interval",
+        "motion_detection_alarm_interval": "Intervalo de alarma",
         "motion_detection_cloud_camera_settings_text": "Área de actividad",
         "motion_detection_cloud_camera_settings_text2": "Cambiar área de actividad",
         "motion_detection_description_text": "Opciones para seleccionar cuando se detecta un movimiento.",
-        "motion_detection_detect_baby_crying": "Baby cry detection",
+        "motion_detection_detect_baby_crying": "Detección de llanto de bebé",
         "motion_detection_headline_text": "Detección de movimiento",
         "motion_detection_no_safe_mode_text": "Activar la iluminación",
         "motion_detection_no_safe_mode_trigger_text": "Notificaciones de activación",
-        "motion_detection_pir": "Motion detection level",
-        "motion_detection_select_detection_sensitivity_level": "Detection sensitivity level",
+        "motion_detection_pir": "Nivel de detección de movimiento",
+        "motion_detection_select_detection_sensitivity_level": "Nivel de sensibilidad de detección",
         "motion_detection_selectionfield2_topic_text": "Valor Lux",
         "motion_detection_selectionfield2_value2_text": "300 (anochecer)",
         "motion_detection_selectionfield2_value3_text": "50 (tarde)",
@@ -787,7 +787,7 @@ export default {
         "motion_detection_selectionfield2_value5_text": "5 (oscuridad)",
         "motion_detection_selectionfield2_value_text": "2000 (día)",
         "motion_detection_selectionfield_topic_text": "Sensibilidad",
-        "motion_detection_sound_detection": "Sound detection",
+        "motion_detection_sound_detection": "Detección de sonido",
         "motion_detection_standby_light_brightness_text": "Brillo de la luz de espera",
         "motion_detection_standby_light_text1": "Luz de espera",
         "motion_detection_standby_light_text2": "Apagar después de un período de tiempo",
@@ -798,7 +798,7 @@ export default {
         "motion_detection_time_schedule_notifications_field_weekdays_text4": "Todos los días",
         "motion_detection_time_schedule_notifications_warning_text": "Se ha alcanzado el número máximo de programaciones horarias.",
         "motion_detection_trigger_text": "Activar la iluminación",
-        "motion_detection_video_recording_duration": "Video recording duration",
+        "motion_detection_video_recording_duration": "Duración de la grabación de vídeo",
         "motion_detection_with_safe_mode_brightness_text": "Brillo de iluminación",
         "motion_detection_with_safe_mode_safetymode_sensing_text": "Distancia de detección",
         "motion_detection_with_safe_mode_safetymode_value4_text": "Personalizado",
@@ -821,11 +821,11 @@ export default {
         "plug_energyconsumptionswitch": "Cambia al modo de consumo de energía",
         "plug_energygenerationswitch": "Cambia al modo de generación de energía",
         "pos_mode_switching_fail_tips": "Contraseña incorrecta. Compruebe e introduzca la contraseña correcta.",
-        "power_management_battery_remaining": "Remaining battery level",
-        "power_management_low_battery_alarm_threshold": "Set the level the battery should have for the alarm to start",
-        "power_management_power_source": "Power source",
+        "power_management_battery_remaining": "Nivel de batería restante",
+        "power_management_low_battery_alarm_threshold": "Establece el nivel que debe tener la batería para que se encienda la alarma",
+        "power_management_power_source": "Fuente de alimentación",
         "power_management_power_source_battery": "Batería",
-        "power_management_power_source_power_cable": "Power cable",
+        "power_management_power_source_power_cable": "Cable de alimentación",
         "power_off_memory_customized_description": "Selección del valor de color y brillo definida por el usuario.",
         "power_off_memory_default_state_description": "Vuelve al valor predeterminado de color y brillo.",
         "power_off_memory_default_state_title": "Estado por defecto",
@@ -850,8 +850,8 @@ export default {
         "power_strip_tile_socket_1_headline": "Enchufe 1",
         "power_strip_tile_socket_2_headline": "Enchufe 2",
         "power_strip_tile_socket_3_headline": "Enchufe 3",
-        "power_strip_tile_socket_4_headline": "Socket 4",
-        "power_strip_tile_socket_5_headline": "Socket 5",
+        "power_strip_tile_socket_4_headline": "Enchufe 4",
+        "power_strip_tile_socket_5_headline": "Enchufe 5",
         "power_strip_tile_socket_usb_headline": "Toma USB",
         "privatemode_description": "Cerrar los canales de transmisión de audio y vídeo de la cámara para proteger la privacidad de los usuarios cuando están en casa.",
         "push_notifications_contact_sensor_door_closing_title": "Recordatorio de cierre",
@@ -1019,48 +1019,48 @@ export default {
         "switch1_active_timer_field_small_on_text": "Switch 1 on at {0}",
         "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
         "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
-        "switch_4channelfunctions1": "Switch 1",
-        "switch_4channelfunctions2": "Switch 2",
-        "switch_4channelfunctions3": "Switch 3",
-        "switch_4channelfunctions4": "Switch 4",
-        "switch_4channels1setting": "Switch 1 setting",
-        "switch_4channels2setting": "Switch 2 setting",
-        "switch_4channels3setting": "Switch 3 setting",
-        "switch_4channels4setting": "Switch 4 setting",
+        "switch_4channelfunctions1": "Interruptor 1",
+        "switch_4channelfunctions2": "Interruptor 2",
+        "switch_4channelfunctions3": "Interruptor 3",
+        "switch_4channelfunctions4": "Interruptor 4",
+        "switch_4channels1setting": "Configuración Switch 1",
+        "switch_4channels2setting": "Configuración Switch 2",
+        "switch_4channels3setting": "Configuración Switch 3",
+        "switch_4channels4setting": "Configuración Switch 4",
         "switch_active_timer_field_small_off_text": "Switch off in {0}",
         "switch_active_timer_field_small_on_text": "Switch on in {0}",
-        "switch_doublepress": "Double press",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "Allows only one switch to be turned on at a time",
-        "switch_longpress": "Long press",
+        "switch_doublepress": "Prensa doble",
+        "switch_interlock": "Enclavamiento",
+        "switch_interlock_addbtn_text": "Añadir interbloqueo",
+        "switch_interlock_addtitle": "Añadir un nuevo interbloqueo",
+        "switch_interlock_delete_popup_topic": "¿Está seguro de que desea eliminar el bloqueo?",
+        "switch_interlock_editbtn_text": "Eliminar interbloqueo",
+        "switch_interlock_edittitle": "Editar el interbloqueo",
+        "switch_interlockingdescription": "Permite que solo se encienda un interruptor a la vez",
+        "switch_longpress": "Pulsación larga",
         "switch_overcharge_headline_description": "La función desactiva automáticamente la carga de los dispositivos móviles, incluidos los teléfonos móviles y las baterías externas, cuando están completamente cargados para evitar la sobrecarga y prolongar la duración de la batería.",
         "switch_overcharge_headline_text": "Protección de sobrecarga",
-        "switch_singlepress": "Single press",
+        "switch_singlepress": "Pulsación única",
         "switchdescription_energy": "Ten en cuenta que los datos de energía total se reiniciarán y no se podrán recuperar de nuevo.",
         "switchinching_overview_description_text": "Para apagar automáticamente el dispositivo después de un período de tiempo.",
-        "switchmodule_switch1description": "Switch 1 description",
-        "switchmodule_switch1title": "Switch 1",
-        "switchmodule_switch2description": "Switch 2 description",
-        "switchmodule_switch2title": "Switch 2",
-        "switchmodule_switchdescription": "Switch description",
+        "switchmodule_switch1description": "Descripción de Switch 1",
+        "switchmodule_switch1title": "Interruptor 1",
+        "switchmodule_switch2description": "Descripción de Switch 2",
+        "switchmodule_switch2title": "Interruptor 2",
+        "switchmodule_switchdescription": "Descripción del conmutador",
         "switchmodule_switchtitle": "Cambiar",
-        "switchmodule_typesetting": "Switch state",
-        "switchmodule_typesetting1": "Each toggle of the wall switch triggers a change in the device's state.",
-        "switchmodule_typesetting2": "Wall switch positions correspond to fixed ON and OFF states. Turning the switch ON sets the device to ON; if it's already ON, the command is ignored and the state remains unchanged.",
-        "switchmodule_typesetting3": "If your wall switch only stays in the ON position while being pressed and automatically returns to OFF when released, it behaves like a momentary (impulse) switch.",
-        "switchmodule_typesettingdescription": "To configure the switch state setting",
-        "switchname_1channel": "Smart switch 1 channel",
-        "switchname_2channel": "Smart switch 2 channel",
-        "switchname_4channel": "Smart switch 4 channel",
+        "switchmodule_typesetting": "Estado del conmutador",
+        "switchmodule_typesetting1": "Cada vez que se activa el interruptor de pared se desencadena un cambio en el estado del dispositivo.",
+        "switchmodule_typesetting2": "Las posiciones de los interruptores de pared corresponden a los estados fijos de encendido y apagado. Al encender el interruptor, el dispositivo se enciende; si ya está encendido, el comando se ignora y el estado permanece inalterado.",
+        "switchmodule_typesetting3": "Si el interruptor de pared solo permanece en la posición ON mientras se presiona y vuelve automáticamente a OFF cuando se suelta, se comporta como un interruptor momentáneo (impulsivo).",
+        "switchmodule_typesettingdescription": "Para configurar la configuración del estado del conmutador",
+        "switchname_1channel": "Conmutador inteligente de 1 canal",
+        "switchname_2channel": "Conmutador inteligente de 2 canales",
+        "switchname_4channel": "Conmutador inteligente de 4 canales",
         "switchonlyonce": "Cambiar de modo sólo está permitido una vez al día.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Interruptor basculante",
+        "switchstate2selection": "Interruptor basculante sincronizado",
+        "switchstate3selection": "Pulsador",
         "switchtitle_energyconsumption": "¿De verdad quieres pasar al consumo de energía?",
         "switchtitle_energygeneration": "¿De verdad quieres cambiar a la generación de energía?",
         "temperature": "TEMPERATURA",
@@ -1109,7 +1109,7 @@ export default {
         "thermostat_vacationplan": "Plan de vacaciones",
         "thermostat_warm": "Confort",
         "third_irrigation": "Tercer Riego",
-        "time_format": "Time format",
+        "time_format": "Formato de Hora",
         "time_unit_h": "h",
         "timer_ceiling_fan_headline_text": "Temporizador",
         "timer_ceiling_fan_lighting_switched_off_text": "La luz se apagará aproximadamente a las {0}",
@@ -5973,7 +5973,7 @@ export default {
         "btsolar_groups_inductionsync_description": "Den Bewegungssensor aller Lampen zu synchronisieren, so dass, wenn eine von ihnen eine Bewegung erkennt, auch die anderen eingeschaltet werden.",
         "camera_calibration": "Kamerakalibrierung",
         "camera_calibration_desc": "Die Kamerakalibrierung dauert ca. 25 Sekunden. Möchtest Du fortfahren?",
-        "camera_edit_site_name": "Ort-Namen bearbeiten",
+        "camera_edit_site_name": "Standortnamen bearbeiten",
         "camera_errmsg_site_point_limit": "Die Standortüberwachung konnte nicht aktiviert werden, da weniger als 2 Standorte hinzugefügt wurden.",
         "camera_feature_1_headline": "Sirene",
         "camera_feature_2_headline": "Mikrofon",
@@ -5991,7 +5991,7 @@ export default {
         "camera_private_mode_sleep": "Gerät im Ruhemodus",
         "camera_private_mode_sleep_close": "Schalte die Kamera ein",
         "camera_re_connect_stream": "Verbindung wird wieder hergestellt, bitte warten",
-        "camera_restart_device_dialog_content": "Bist du sicher, dass du das Gerät neu starten möchtest?",
+        "camera_restart_device_dialog_content": "Bist Du sicher, dass du das Gerät neu starten möchtest?",
         "camera_select_patrol_mode": "Wähle einen Patrouillenmodus",
         "camera_select_patrol_mode_panoramic": "Panoramapatrouille",
         "camera_select_patrol_mode_panoramic_desc": "Die Kamera überwacht jeden Winkel",
@@ -6001,7 +6001,7 @@ export default {
         "camera_set_patrol_time_all_day": "Ganztägige Patrouille",
         "camera_set_patrol_time_all_day_desc": "Die Patrouille wird rund um die Uhr fortgesetzt",
         "camera_set_patrol_time_timed": "Zeitgesteuerte Patrouille",
-        "camera_set_patrol_time_timed_desc": "Die Patrouille wird wie geplant wirksam",
+        "camera_set_patrol_time_timed_desc": "Die Patrouillen werden wie geplant durchgeführt",
         "camera_settings_anti_dismantle_topic": "Anti-Demontage-Alarm",
         "camera_settings_anti_flicker_50hz": "50 Hz",
         "camera_settings_anti_flicker_60hz": "60 Hz",
@@ -6047,10 +6047,10 @@ export default {
         "camera_settings_talk_mode_firstbox_option2_topic": "Beidseitige Kommunikation",
         "camera_settings_talk_mode_secondtopic": "Die Sprache kann von der Umgebung beeinflusst werden. Je nach Situation empfehlen wir entweder ein- oder beidseitige-Kommunikation.",
         "camera_settings_talk_mode_topic": "Gesprächsmodus",
-        "camera_site": "Ort",
-        "camera_site_delete_dialog_title": "Möchtest Du die Orte wirklich löschen?",
+        "camera_site": "Standort",
+        "camera_site_delete_dialog_title": "Möchtest Du den Standort wirklich löschen?",
         "camera_site_name": "Standortname",
-        "camera_site_overview_empty_button_add_text": "Ort hinzufügen",
+        "camera_site_overview_empty_button_add_text": "Standort hinzufügen",
         "camera_site_overview_empty_information_text": "Du hast noch keine Ort hinzugefügt",
         "camera_site_overview_warning_max_number_text": "Die maximale Anzahl an Orte wurde erreicht.",
         "camera_status_indicator": "Statusanzeige",
@@ -6335,7 +6335,7 @@ export default {
         "curtain_motor_steering1_description": "Der Rolladenmotor läuft in Vorwärtsrichtung",
         "curtain_motor_steering2": "Rückwärtsrichtung",
         "curtain_motor_steering2_description": "Der Rolladenmotor läuft in Rückwärtsrichtung",
-        "curtain_motor_steering_tip": "So konfigurierst du die Richtung des Rollladenmotors",
+        "curtain_motor_steering_tip": "So konfigurierst Du die Richtung des Rollladenmotors",
         "curtain_summary_action_txt_1": "Offen",
         "curtain_summary_action_txt_2": "Schließen",
         "daily": "Täglich",
@@ -6486,7 +6486,7 @@ export default {
         "hybrid_switchstate_setting3": "Einstellung 3",
         "hybrid_switchstate_setting3_description": "Schaltertaste",
         "hybrid_switchstate_setting_text": "Schaltereinstellungen",
-        "hybrid_switchstate_title": "Zustand des Schalters",
+        "hybrid_switchstate_title": "Schalterkonfiguration",
         "infobutton_totalenergy": "Die Gesamtenergie zeigt nur die gesamten Verbrauchs-/Erzeugungsdaten nach dem letzten Reset an.\nDie Daten wurden an folgenden Tagen umgeschaltet:",
         "intermittent_time": "Unterbrechungsdauer",
         "irrigation": "Bewässerung",
@@ -6756,16 +6756,16 @@ export default {
         "smoke_alerteffect": "Rauch erkannt",
         "smoke_alertfree": "Kein Rauch erkannt",
         "smoke_equipmentselftest": "Geräteselbsttest",
-        "socket1_active_timer_field_small_off_text": "Sockel 1 aus in {0}",
-        "socket1_active_timer_field_small_on_text": "Sockel 1 an in {0}",
-        "socket2_active_timer_field_small_off_text": "Sockel 2 aus in {0}",
-        "socket2_active_timer_field_small_on_text": "Sockel 2 an in {0}",
-        "socket3_active_timer_field_small_off_text": "Sockel 3 aus in {0}",
-        "socket3_active_timer_field_small_on_text": "Sockel 3 an in {0}",
-        "socket4_active_timer_field_small_off_text": "Sockel 4 aus in {0}",
-        "socket4_active_timer_field_small_on_text": "Sockel 4 an in {0}",
-        "socket5_active_timer_field_small_off_text": "Sockel 5 aus in {0}",
-        "socket5_active_timer_field_small_on_text": "Sockel 5 an in {0}",
+        "socket1_active_timer_field_small_off_text": "Steckdose 1 aus in {0}",
+        "socket1_active_timer_field_small_on_text": "Steckdose 1 an in {0}",
+        "socket2_active_timer_field_small_off_text": "Steckdose 2 aus in {0}",
+        "socket2_active_timer_field_small_on_text": "Steckdose 2 an in {0}",
+        "socket3_active_timer_field_small_off_text": "Steckdose 3 aus in {0}",
+        "socket3_active_timer_field_small_on_text": "Steckdose 3 an in {0}",
+        "socket4_active_timer_field_small_off_text": "Steckdose 4 aus in {0}",
+        "socket4_active_timer_field_small_on_text": "Steckdose 4 an in {0}",
+        "socket5_active_timer_field_small_off_text": "Steckdose 5 aus in {0}",
+        "socket5_active_timer_field_small_on_text": "Steckdose 5 an in {0}",
         "socket_settings_firstbox_status1_description": "Gerät bleibt ausgeschaltet",
         "socket_settings_firstbox_status2_description": "Gerät bleibt eingeschaltet",
         "socket_settings_firstbox_status3_description": "Kehre zum Zustand zurück, bevor der Strom abgeschaltet wurde",
@@ -6876,8 +6876,8 @@ export default {
         "striplight_lengthadaptationtext": "Wenn das Lichtband zugeschnitten wurde, kannst Du die Länge in der App anpassen.",
         "striplight_lengthtitle": "Länge des Lichtstreifens",
         "switch1_active_timer_field_small_off_text": "Schalter 1 aus in {0}",
-        "switch1_active_timer_field_small_on_text": "Schalter 1 auf {0}",
-        "switch2_active_timer_field_small_off_text": "Schalter 2 aus in {0}",
+        "switch1_active_timer_field_small_on_text": "Schalter 1 ein bei {0}",
+        "switch2_active_timer_field_small_off_text": "Schalter 2 aus bei {0}",
         "switch2_active_timer_field_small_on_text": "Schalter 2 ein in {0}",
         "switch_4channelfunctions1": "Schalter 1",
         "switch_4channelfunctions2": "Schalter 2",
@@ -6887,9 +6887,9 @@ export default {
         "switch_4channels2setting": "Schalter 2 Einstellung",
         "switch_4channels3setting": "Schalter 3 Einstellung",
         "switch_4channels4setting": "Schalter 4 Einstellung",
-        "switch_active_timer_field_small_off_text": "Ausschalten in {0}",
-        "switch_active_timer_field_small_on_text": "Einschalten in {0}",
-        "switch_doublepress": "Doppelt drücken",
+        "switch_active_timer_field_small_off_text": "Schalter aus bei {0}",
+        "switch_active_timer_field_small_on_text": "Schalter ein in {0}",
+        "switch_doublepress": "Doppeltes Drücken",
         "switch_interlock": "Verriegelung",
         "switch_interlock_addbtn_text": "Verriegelung hinzufügen",
         "switch_interlock_addtitle": "Eine neue Verriegelung hinzufügen",
@@ -6897,23 +6897,23 @@ export default {
         "switch_interlock_editbtn_text": "Verriegelung löschen",
         "switch_interlock_edittitle": "Bearbeiten der Verriegelung",
         "switch_interlockingdescription": "Um die Bedienung jeweils nur eines Schalters zu ermöglichen",
-        "switch_longpress": "Langes drücken",
+        "switch_longpress": "Langes Drücken",
         "switch_overcharge_headline_description": "Die Funktion schaltet das Aufladen Deiner mobilen Geräte, einschließlich Mobiltelefone und Powerbanks, automatisch aus, wenn sie vollständig aufgeladen sind, um ein Überladen zu verhindern und die Akkulaufzeit zu verlängern.",
         "switch_overcharge_headline_text": "Überladeschutz",
-        "switch_singlepress": "Einmal drücken",
+        "switch_singlepress": "Einmaliges Drücken",
         "switchdescription_energy": "Beachte, dass die Gesamtenergiedaten zurückgesetzt werden und nicht wiederhergestellt werden können.",
         "switchinching_overview_description_text": "Um das Gerät nach einer bestimmten Zeit automatisch auszuschalten.",
-        "switchmodule_switch1description": "Switch 1 Beschreibung",
+        "switchmodule_switch1description": "Schalter 1 Beschreibung",
         "switchmodule_switch1title": "Schalter 1",
         "switchmodule_switch2description": "Schalter 2 Beschreibung",
         "switchmodule_switch2title": "Schalter 2",
-        "switchmodule_switchdescription": "Beschreibung des Switches",
+        "switchmodule_switchdescription": "Beschreibung des Schalters",
         "switchmodule_switchtitle": "Wechseln",
-        "switchmodule_typesetting": "Zustand des Schalters",
+        "switchmodule_typesetting": "Schalterkonfiguration",
         "switchmodule_typesetting1": "Jedes Umschalten des Wandschalters löst eine Änderung des Gerätezustands aus.",
         "switchmodule_typesetting2": "Die Positionen der Wandschalter entsprechen festen EIN- und AUS-Zuständen. Durch Einschalten des Schalters wird das Gerät eingeschaltet. Ist es bereits eingeschaltet, wird der Befehl ignoriert und der Zustand bleibt unverändert.",
         "switchmodule_typesetting3": "Wenn dein Wandschalter nur in der EIN-Position bleibt, während er gedrückt wird, und automatisch in die AUS-Position zurückkehrt, wenn er losgelassen wird, verhält er sich wie ein Taster.",
-        "switchmodule_typesettingdescription": "So konfigurierst du die Einstellung für den Schaltzustand",
+        "switchmodule_typesettingdescription": "So konfigurierst du die Einstellung für den Wandschalter",
         "switchname_1channel": "Smarte Schalter 1 Kanal",
         "switchname_2channel": "Smarte Schalter 2 Kanal",
         "switchname_4channel": "Smarte Schalter 4 Kanal",
@@ -7143,8 +7143,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "ΑΚΥΡΩΣΗ",
         "btsolar_groups_inductionsync": "Συγχρονισμός ανίχνευσης κίνησης",
         "btsolar_groups_inductionsync_description": "Για να συγχρονίσετε τον αισθητήρα κίνησης όλων των λαμπτήρων έτσι ώστε αν ένας από αυτούς ανιχνεύσει κίνηση τότε θα ανάψουν και οι άλλοι.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Βαθμονόμηση κάμερας",
+        "camera_calibration_desc": "Η βαθμονόμηση της κάμερας διαρκεί περίπου 25 δευτερόλεπτα. Θέλεις να συνεχίσεις;",
         "camera_edit_site_name": "Επεξεργασία ονόματος τοποθεσίας",
         "camera_errmsg_site_point_limit": "Αποτυχία ενεργοποίησης της περιπολίας τοποθεσίας επειδή προστέθηκαν λιγότερες από 2 τοποθεσίες.",
         "camera_feature_1_headline": "Σειρήνα",
@@ -7155,7 +7155,7 @@ export default {
         "camera_local_recording": "Τοπική εγγραφή",
         "camera_mic_two_way_talking": "Κλήση.....",
         "camera_net_err": "Η σύνδεση της συσκευής διακόπτεται, ελέγξτε τη συσκευή και το δίκτυό της",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "Δεν είναι επεξεργάσιμο σε λειτουργία περιπολίας τοποθεσίας",
         "camera_patrol": "Περιπολία",
         "camera_patrol_cruise_time": "Χρόνος πλήγησης：{0} - {1}",
         "camera_patrol_enable": "Ενεργοποίηση περιπολίας",
@@ -7496,12 +7496,12 @@ export default {
         "curtain_control_headline_text": "Κουρτίνα",
         "curtain_control_title": "Έλεγχος κουρτίνας",
         "curtain_fast_calibration": "Γρήγορη βαθμονόμηση",
-        "curtain_fast_calibration_step1": "1. Κλείστε πλήρως τις κουρτίνες.\n\n2. Κάντε κλικ στο «Επόμενο βήμα» για να ξεκινήσετε τη βαθμονόμηση.",
-        "curtain_fast_calibration_step2": "Εισαγάγετε τον χρόνο που απαιτείται από την κουρτίνα για πλήρες κλείσιμο.",
-        "curtain_fast_toast_text": "Η γρήγορη βαθμονόμηση δεν επιτρέπεται όταν ο εξοπλισμός κουρτίνας βρίσκεται στο επίπεδο ανοίγματος 0%.",
+        "curtain_fast_calibration_step1": "1. Πάρτε ένα χρονόμετρο.\n\n2. Κλείστε πλήρως τις κουρτίνες.\n\n3. Ανοίξτε πλήρως τις κουρτίνες και μετρήστε το χρόνο με χρονόμετρο από πλήρως κλειστές έως πλήρως ανοιχτές.\n\n4. Κάντε κλικ στο \"Επόμενο βήμα\" και εισαγάγετε στρογγυλοποιημένο ακέραιο αριθμό δευτερολέπτων που μετρήσατε με χρονόμετρο.",
+        "curtain_fast_calibration_step2": "Εισαγάγετε τον χρόνο που απαιτείται από την κουρτίνα απο πλήρες κλείσιμο, σε πλήρες άνοιγμα.",
+        "curtain_fast_toast_text": "Η γρήγορη βαθμονόμηση δεν επιτρέπεται όταν η κουρτίνα βρίσκεται σε επίπεδο ανοίγματος 0%.",
         "curtain_intelligent_calibration": "Έξυπνη βαθμονόμηση",
-        "curtain_intelligent_calibration_step1": "1. Τοποθετήστε σωστά την κουρτίνα πριν από τη βαθμονόμηση, ώστε να μπορεί να ανοίξει πλήρως ή να κλείσει.\n\n2. Μετακινήστε την κουρτίνα ώστε να είναι πλήρως ανοιγμένη/κλειστή και πατήστε παύση.\n\n3. Κάντε κλικ στο «Επόμενο βήμα», μόλις γίνει αυτό.",
-        "curtain_intelligent_calibration_step2": "1. Μετακινήστε την κουρτίνα για να \"ανοίξει\" πλήρως.\n\n2. Μετακινήστε την κουρτίνα για να \"κλείσει\" πλήρως.\n\n3. Μόλις ολοκληρωθούν τα βήματα στα 1 και 2, κάντε κλικ στο \"\"Βαθμονόμηση.",
+        "curtain_intelligent_calibration_step1": "Λάβετε υπόψη ότι για έξυπνη βαθμονόμηση χρειάζεστε έναν διακόπτη τοίχου για να ανοίξετε/κλείσετε πλήρως την κουρτίνα. Εάν δεν χρησιμοποιείτε διακόπτη τοίχου, χρησιμοποιήστε τη λειτουργία γρήγορης βαθμονόμησης.\n\n1. Τοποθετήστε σωστά τον κινητήρα κουρτίνας πριν από τη βαθμονόμηση έτσι ώστε η κουρτίνα να μπορεί να ανοίξει πλήρως ή να κλείσει.\n\n2. Κάντε κλικ στο «Επόμενο βήμα».",
+        "curtain_intelligent_calibration_step2": "1. Πατήστε το διακόπτη τοίχου για να ανοίξετε την κουρτίνα μέχρι να ανοίξει πλήρως.\n\n2. Πατήστε το διακόπτη τοίχου για να κλείσετε την κουρτίνα μέχρι να κλείσει πλήρως.\n\n3. Μόλις ολοκληρωθούν τα βήματα στα 1 και 2, κάντε κλικ στην επιλογή «Βαθμονόμηση».",
         "curtain_motor_steering": "Σύστημα διεύθυνσης κινητήρα",
         "curtain_motor_steering1": "Κατεύθυνση προς τα εμπρός",
         "curtain_motor_steering1_description": "Ο κινητήρας κουρτίνας τρέχει προς τα εμπρός",
@@ -8068,7 +8068,7 @@ export default {
         "switch_interlock_delete_popup_topic": "Θέλετε πραγματικά να διαγράψετε την αλληλοσύνδεση;",
         "switch_interlock_editbtn_text": "Διαγραφή αλληλοσύνδεσης",
         "switch_interlock_edittitle": "Επεξεργασία της αλληλοσύνδεσης",
-        "switch_interlockingdescription": "Για να επιτρέψετε τη λειτουργία μόνο ενός διακόπτη κάθε φορά",
+        "switch_interlockingdescription": "Επιτρέπει την ενεργοποίηση μόνο ενός διακόπτη κάθε φορά",
         "switch_longpress": "Παρατεταμένο πάτημα",
         "switch_overcharge_headline_description": "Η λειτουργία απενεργοποιεί αυτόματα τη φόρτιση των κινητών συσκευών σας, συμπεριλαμβανομένων των κινητών τηλεφώνων και των τροφοδοτικών τραπεζών, όταν είναι πλήρως φορτισμένες για να αποφευχθεί η υπερφόρτιση και να παραταθεί η διάρκεια ζωής της μπαταρίας.",
         "switch_overcharge_headline_text": "Προστασία υπερφόρτισης",
@@ -8090,8 +8090,8 @@ export default {
         "switchname_2channel": "Έξυπνος διακόπτης 2 καναλιών",
         "switchname_4channel": "Έξυπνος διακόπτης 4 καναλιών",
         "switchonlyonce": "Η εναλλαγή της λειτουργίας επιτρέπεται μόνο μία φορά την ημέρα.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
+        "switchstate1selection": "Διακόπτης rocker",
+        "switchstate2selection": "Συγχρονισμένος διακόπτης rocker",
         "switchstate3selection": "Push button",
         "switchtitle_energyconsumption": "Θέλετε πραγματικά να μεταβείτε στην κατανάλωση ενέργειας;",
         "switchtitle_energygeneration": "Θέλετε πραγματικά να στραφείτε στην παραγωγή ενέργειας;",
@@ -8315,10 +8315,10 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Cancelar",
         "btsolar_groups_inductionsync": "Sincronización de detección de movimiento",
         "btsolar_groups_inductionsync_description": "Sincronizar el sensor de movimiento de todas las lámparas para que, si una de ellas detecta un movimiento, las demás también se enciendan.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
-        "camera_edit_site_name": "Edit Site name",
-        "camera_errmsg_site_point_limit": "Failed to enable site patrol because less than 2 sites were added.",
+        "camera_calibration": "Calibración de cámara",
+        "camera_calibration_desc": "La calibración de la cámara tarda unos 25 segundos. ¿Quieres continuar?",
+        "camera_edit_site_name": "Editar nombre del sitio",
+        "camera_errmsg_site_point_limit": "No se pudo habilitar el control de espacio porque se agregaron menos de 2 sitios.",
         "camera_feature_1_headline": "Sirena",
         "camera_feature_2_headline": "Micrófono",
         "camera_feature_5_headline": "Grabaciones",
@@ -8327,11 +8327,11 @@ export default {
         "camera_local_recording": "Grabación local",
         "camera_mic_two_way_talking": "Llamando...",
         "camera_net_err": "Conexión del dipositivo interrumpida, por favor comprueba que está conectado",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "No se puede editar en el modo de patrulla in situ",
         "camera_patrol": "Patrullando",
         "camera_patrol_cruise_time": "Tiempo de crucero：{0} - {1}",
         "camera_patrol_enable": "Habilitar el patrullaje",
-        "camera_preset_point": "Preset Point",
+        "camera_preset_point": "Punto preestablecido",
         "camera_private_mode_sleep": "Dispositivo en modo de reposo",
         "camera_private_mode_sleep_close": "Enciende la cámara",
         "camera_re_connect_stream": "Reconectando, por favor espera",
@@ -8374,7 +8374,7 @@ export default {
         "camera_settings_onvif_set_password_tips": "La contraseña del dispositivo admite entre 8 y 32 caracteres y debe contener letras mayúsculas y minúsculas, así como dígitos.",
         "camera_settings_onvif_switch_topic": "Interruptor Onvif",
         "camera_settings_onvif_topic": "Onvif",
-        "camera_settings_power_management_settings_topic": "Power Management Settings",
+        "camera_settings_power_management_settings_topic": "Configuración de administración de energía",
         "camera_settings_recording_mode_firstbox_topic1": "Activado por movimiento",
         "camera_settings_recording_mode_firstbox_topic1_description": "Sólo grabará si se detecta un movimiento",
         "camera_settings_recording_mode_firstbox_topic2": "Continuo",
@@ -8391,12 +8391,12 @@ export default {
         "camera_settings_talk_mode_firstbox_option2_topic": "Comunicación bidireccional",
         "camera_settings_talk_mode_secondtopic": "El habla puede verse influida por el entorno. Según la situación, recomendamos la comunicación unidireccional o bidireccional.",
         "camera_settings_talk_mode_topic": "Modo de conversación",
-        "camera_site": "Site",
-        "camera_site_delete_dialog_title": "Do you really want to delete the site?",
-        "camera_site_name": "Site name",
-        "camera_site_overview_empty_button_add_text": "Add site",
-        "camera_site_overview_empty_information_text": "You have not added a site yet",
-        "camera_site_overview_warning_max_number_text": "Maximum number of sites has been reached",
+        "camera_site": "Sitio",
+        "camera_site_delete_dialog_title": "¿De verdad quieres eliminar el sitio?",
+        "camera_site_name": "Nombre del sitio",
+        "camera_site_overview_empty_button_add_text": "Agregar sitio",
+        "camera_site_overview_empty_information_text": "Aún no has añadido un sitio",
+        "camera_site_overview_warning_max_number_text": "Se ha alcanzado el número máximo de sitios",
         "camera_status_indicator": "Indicador de estado",
         "camera_tile_camera_button_label_photo": "Tomar una foto",
         "camera_tile_camera_button_label_video": "Grabar un video",
@@ -8668,12 +8668,12 @@ export default {
         "curtain_control_headline_text": "Cortina",
         "curtain_control_title": "Control de cortinas",
         "curtain_fast_calibration": "Calibración rápida",
-        "curtain_fast_calibration_step1": "1. Cierra las cortinas por completo.\n\n2. Haga clic en «Siguiente paso» para iniciar la calibración.",
+        "curtain_fast_calibration_step1": "1. Coge un cronómetro.\n\n2. Cierra las cortinas por completo.\n\n3. Abre las cortinas por completo y cronometra desde que están completamente cerradas hasta que están completamente abiertas.\n\n4. Haz clic en «Siguiente paso» e introduce el número entero redondeado de los segundos que midió con el cronómetro.",
         "curtain_fast_calibration_step2": "Introduce el tiempo necesario para que la cortina se cierre por completo.",
-        "curtain_fast_toast_text": "No se permite una calibración rápida cuando el equipo de la cortina tiene un nivel de apertura del 0%.",
+        "curtain_fast_toast_text": "Solo se permite una calibración rápida cuando la cortina está completamente cerrada al 0%.",
         "curtain_intelligent_calibration": "Calibración inteligente",
-        "curtain_intelligent_calibration_step1": "1. Instale la cortina correctamente antes de la calibración para que pueda abrirse o cerrarse por completo.\n\n2. Mueva la cortina hasta que esté completamente abierta/cerrada y pulse la pausa.\n\n3. Haga clic en «Siguiente paso», una vez hecho.",
-        "curtain_intelligent_calibration_step2": "1. Mueva la cortina para que esté completamente «abierta».\n\n2. Mueva la cortina para «cerrarla» por completo.\n\n3. Una vez finalizados los pasos 1 y 2, haga clic en «Calibrar».",
+        "curtain_intelligent_calibration_step1": "Ten en cuenta que para la calibración inteligente, necesitas un interruptor de pared para abrir/cerrar completamente la cortina. Si no utilizas un interruptor de pared, utiliza el modo de calibración rápida.\n\n1. Instala correctamente el motor de la cortina antes de la calibración para que la cortina pueda abrirse/cerrarse completamente.\n\n2. Haz clic en \"Siguiente\".",
+        "curtain_intelligent_calibration_step2": "1. Pulsa el interruptor de pared para abrir la cortina hasta que esté completamente abierta.\n\n2. Pulsa el interruptor de pared para cerrar la cortina hasta que esté completamente cerrada.\n\n3. Una vez finalizados los pasos 1 y 2, haga clic en «Calibrar».",
         "curtain_motor_steering": "Dirección motorizada",
         "curtain_motor_steering1": "Dirección hacia adelante",
         "curtain_motor_steering1_description": "El motor de la cortina funciona hacia delante",
@@ -8974,7 +8974,7 @@ export default {
         "motion_detection_add_time_schedule_headline_text": "Añadir un nuevo horario",
         "motion_detection_add_time_schedule_selectionfield_text": "Nombre",
         "motion_detection_add_time_schedule_system_back_text": "Programación horaria",
-        "motion_detection_alarm_interval": "Alarm Interval",
+        "motion_detection_alarm_interval": "Intervalo de alarma",
         "motion_detection_cloud_camera_settings_text": "Área de actividad",
         "motion_detection_cloud_camera_settings_text2": "Cambiar área de actividad",
         "motion_detection_description_text": "Opciones para seleccionar cuando se detecta un movimiento.",
@@ -9262,9 +9262,9 @@ export default {
         "switchname_2channel": "Canal del interruptor inteligente 2",
         "switchname_4channel": "Canal del interruptor inteligente 4",
         "switchonlyonce": "Cambiar de modo sólo está permitido una vez al día.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Interruptor basculante",
+        "switchstate2selection": "Interruptor basculante sincronizado",
+        "switchstate3selection": "Pulsador",
         "switchtitle_energyconsumption": "¿De verdad quieres pasar al consumo de energía?",
         "switchtitle_energygeneration": "¿De verdad quieres cambiar a la generación de energía?",
         "temperature": "Temperatura",
@@ -10659,8 +10659,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Peruuta",
         "btsolar_groups_inductionsync": "Liiketunnistuksen synkronointi",
         "btsolar_groups_inductionsync_description": "Synkronoi kaikkien lamppujen liiketunnistimet niin, että jos yksi niistä havaitsee liikkeen, myös muut syttyvät.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Kameran kalibrointi",
+        "camera_calibration_desc": "Kameran kalibrointi kestää noin 25 sekuntia. Haluatko jatkaa?",
         "camera_edit_site_name": "Muokkaa kohteen nimeä",
         "camera_errmsg_site_point_limit": "Kohteen valvonnan käyttöönotto epäonnistui, koska alle 2 kohdetta lisättiin.",
         "camera_feature_1_headline": "Sireeni",
@@ -10671,7 +10671,7 @@ export default {
         "camera_local_recording": "Paikallinen tallennus",
         "camera_mic_two_way_talking": "Soitetaan…",
         "camera_net_err": "Laitteen yhteys on katkennut, tarkista laite ja sen verkko.",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "Ei muokattavissa kohteen valvontatilassa",
         "camera_patrol": "Valvonta",
         "camera_patrol_cruise_time": "Risteilyaika:{0} - {1}",
         "camera_patrol_enable": "Ota valvonta käyttöön",
@@ -11012,12 +11012,12 @@ export default {
         "curtain_control_headline_text": "Verho",
         "curtain_control_title": "Verhon ohjaus",
         "curtain_fast_calibration": "Nopea kalibrointi",
-        "curtain_fast_calibration_step1": "1. Sulje verhot kokonaan.\n\n2. Aloita kalibrointi napsauttamalla Seuraava vaihe.",
-        "curtain_fast_calibration_step2": "Syötä verhon tarvitsema aika täydelliseen sulkemiseen.",
-        "curtain_fast_toast_text": "Nopea kalibrointi ei ole sallittua, kun verholaite on 0 %:n avautumisasteella.",
+        "curtain_fast_calibration_step1": "1. Ota pysäytyskello.\n\n2. Sulje verhot kokonaan.\n\n3. Avaa verhot kokonaan ja mittaa aika pysäytyskellolla täysin läheltä täysin auki.\n\n4. Napsauta ”Seuraava vaihe” ja kirjoita pyöristetty kokonaisluku sekunneista, jotka olet mitannut pysäytyskellolla.",
+        "curtain_fast_calibration_step2": "Anna verhon tarvitsema aika täysin suljetusta täysin avoimeen.",
+        "curtain_fast_toast_text": "Nopea kalibrointi on sallittua vain, kun verho on täysin suljettu 0%: lla.",
         "curtain_intelligent_calibration": "Älykäs kalibrointi",
-        "curtain_intelligent_calibration_step1": "1. Asenna verho oikein ennen kalibrointia, jotta se voidaan avata tai sulkea kokonaan.\n\n2. Siirrä verho täysin auki/kiinni -asentoon ja paina Tauko-painiketta.\n\n3. Napsauta Seuraava vaihe, kun tämä on tehty.",
-        "curtain_intelligent_calibration_step2": "1. Avaa verho kokonaan. \n\n2. Sulje verho kokonaan. \n\n3. Kun vaiheet 1 ja 2 on tehty, napsauta Kalibroi-painiketta.",
+        "curtain_intelligent_calibration_step1": "Huomaa, että älykästä kalibrointia varten tarvitset seinäkytkimen verhon avaamiseksi/sulkemiseksi kokonaan. Jos et käytä seinäkytkintä, käytä nopeaa kalibrointitilaa.\n\n1. Asenna verhomoottori oikein ennen kalibrointia, jotta verho voidaan avata tai sulkea kokonaan.\n\n2. Napsauta ”Seuraava vaihe”.",
+        "curtain_intelligent_calibration_step2": "1. Avaa verho painamalla seinäkytkintä, kunnes se on täysin auki.\n\n2. Sulje verho painamalla seinäkytkintä, kunnes se on täysin suljettu.\n\n3. Kun vaiheet 1 ja 2 on tehty, napsauta ”Kalibroi”.",
         "curtain_motor_steering": "Moottorin ohjaus",
         "curtain_motor_steering1": "Eteenpäin",
         "curtain_motor_steering1_description": "Verhon moottori pyörii eteenpäin",
@@ -11584,7 +11584,7 @@ export default {
         "switch_interlock_delete_popup_topic": "Haluatko todella poistaa lukituksen?",
         "switch_interlock_editbtn_text": "Poista lukitus",
         "switch_interlock_edittitle": "Muokkaa lukitusta",
-        "switch_interlockingdescription": "Salli vain yhden kytkimen käyttö kerrallaan",
+        "switch_interlockingdescription": "Sallii vain yhden kytkimen kytkemisen päälle kerrallaan",
         "switch_longpress": "Pitkä painallus",
         "switch_overcharge_headline_description": "Ominaisuus sammuttaa automaattisesti mobiililaitteiden, kuten matkapuhelinten ja virtapankkien, lataamisen, kun ne on ladattu täyteen, jotta estetään ylikuormitus ja pidennetään akun käyttöikää.",
         "switch_overcharge_headline_text": "Ylilataussuoja",
@@ -11606,9 +11606,9 @@ export default {
         "switchname_2channel": "Älykytkin 2 kanava",
         "switchname_4channel": "Älykytkin 4 kanava",
         "switchonlyonce": "Tilan vaihtaminen on sallittua vain kerran päivässä.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Keinukytkin",
+        "switchstate2selection": "Synkronoitu keinukytkin",
+        "switchstate3selection": "Painike",
         "switchtitle_energyconsumption": "Haluatko todella siirtyä energiankulutukseen?",
         "switchtitle_energygeneration": "Haluatko todella siirtyä energiantuotantoon?",
         "temperature": "Lämpötila",
@@ -11831,8 +11831,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Annuler",
         "btsolar_groups_inductionsync": "Synchronisation de détection de mouvement",
         "btsolar_groups_inductionsync_description": "Synchroniser le détecteur de mouvement de toutes les lampes afin que si l'une d'elles détecte un mouvement, les autres s'activent également.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Étalonnage de la caméra",
+        "camera_calibration_desc": "L'étalonnage de la caméra dure environ 25 secondes. Voulez-vous continuer ?",
         "camera_edit_site_name": "Modifier la désignation du site",
         "camera_errmsg_site_point_limit": "Impossible d'activer la patrouille car moins de 2 sites ont été ajoutés.",
         "camera_feature_1_headline": "Sirène",
@@ -14175,8 +14175,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Mégse",
         "btsolar_groups_inductionsync": "Mozgásérzékelés szinkronizálása",
         "btsolar_groups_inductionsync_description": "Az összes lámpa mozgásérzékelőjének szinkronizálása úgy, hogy ha egyikük mozgást észlel, akkor a többi is bekapcsolódik.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Kamera kalibrálása",
+        "camera_calibration_desc": "A kamera kalibrálása körülbelül 25 másodpercet vesz igénybe. Folytatja?",
         "camera_edit_site_name": "Hely nevének szerkesztése",
         "camera_errmsg_site_point_limit": "Nem sikerült engedélyezni a helypásztázást, mert kevesebb mint 2 helyet adott hozzá.",
         "camera_feature_1_headline": "Riasztósziréna",
@@ -14187,7 +14187,7 @@ export default {
         "camera_local_recording": "Helyi felvétel",
         "camera_mic_two_way_talking": "Hívás...",
         "camera_net_err": "Az eszközkapcsolat megszakad, kérjük, ellenőrizze az eszközt és annak hálózatát",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "Nem szerkeszthető helyszíni pásztázási módban",
         "camera_patrol": "Pásztázás",
         "camera_patrol_cruise_time": "Stabil fázis: {0} – {1}",
         "camera_patrol_enable": "Pásztázás engedélyezése",
@@ -15122,9 +15122,9 @@ export default {
         "switchname_2channel": "Intelligens kapcsoló, 2 csatorna",
         "switchname_4channel": "Intelligens kapcsoló, 4 csatorna",
         "switchonlyonce": "Az üzemmódváltás naponta csak egyszer engedélyezett.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Billenőkapcsoló",
+        "switchstate2selection": "Szinkronizált billenőkapcsoló",
+        "switchstate3selection": "Nyomógomb",
         "switchtitle_energyconsumption": "Tényleg át akarsz állni az energiafogyasztásra?",
         "switchtitle_energygeneration": "Tényleg át akarsz állni energiatermelésre?",
         "temperature": "Hőmérséklet",
@@ -15347,8 +15347,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Annulla",
         "btsolar_groups_inductionsync": "Sincronizzazione del rilevamento del movimento",
         "btsolar_groups_inductionsync_description": "Per sincronizzare il sensore di movimento di tutte le lampade in modo che se una di esse rileva un movimento, anche le altre si accendano.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Calibrazione della fotocamera",
+        "camera_calibration_desc": "La calibrazione della fotocamera richiede circa 25 secondi. Vuoi continuare?",
         "camera_edit_site_name": "Modifica il nome del sito",
         "camera_errmsg_site_point_limit": "Impossibile abilitare il controllo del sito perché sono stati aggiunti meno di 2 siti.",
         "camera_feature_1_headline": "Allarme",
@@ -15359,7 +15359,7 @@ export default {
         "camera_local_recording": "Registrazione locale",
         "camera_mic_two_way_talking": "Chiamata...",
         "camera_net_err": "La connessione del dispositivo è interrotta, controlla il dispositivo e la sua rete",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "Non modificabile in modalità pattugliamento del sito",
         "camera_patrol": "Pattugliamento",
         "camera_patrol_cruise_time": "Orario：{0} - {1}",
         "camera_patrol_enable": "Abilita il pattugliamento",
@@ -16294,9 +16294,9 @@ export default {
         "switchname_2channel": "Interruttore smart 2 canale",
         "switchname_4channel": "Interruttore smart 4 canale",
         "switchonlyonce": "Il cambio di modalità è consentito solo una volta al giorno.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Interruttore a bilanciere",
+        "switchstate2selection": "Interruttore a bilanciere sincronizzato",
+        "switchstate3selection": "Premere il pulsante",
         "switchtitle_energyconsumption": "Vuoi davvero passare al consumo di energia?",
         "switchtitle_energygeneration": "Vuoi davvero passare alla produzione di energia?",
         "temperature": "Temperatura",
@@ -16519,10 +16519,10 @@ export default {
         "bt_shs_google_button_cancel_enabling": "취소",
         "btsolar_groups_inductionsync": "모션 디텍션 싱크",
         "btsolar_groups_inductionsync_description": "모든 램프의 모션 센서를 동기화하여 램프 중 하나가 움직임을 감지하면 다른 램프도 켜지도록 합니다.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
-        "camera_edit_site_name": "Edit Site name",
-        "camera_errmsg_site_point_limit": "Failed to enable site patrol because less than 2 sites were added.",
+        "camera_calibration": "카메라 캘리브레이션",
+        "camera_calibration_desc": "카메라 캘리브레이션에는 약 25초가 소요됩니다.계속하시겠습니까?",
+        "camera_edit_site_name": "사이트 이름 편집",
+        "camera_errmsg_site_point_limit": "2개 미만의 사이트가 추가되었으므로 사이트 패트롤을 활성화하지 못했습니다.",
         "camera_feature_1_headline": "사이렌",
         "camera_feature_2_headline": "마이크",
         "camera_feature_5_headline": "녹음",
@@ -16531,34 +16531,34 @@ export default {
         "camera_local_recording": "로컬 레코딩",
         "camera_mic_two_way_talking": "전화 중...",
         "camera_net_err": "장치 연결이 중단되었습니다. 장치와 네트워크를 확인하십시오.",
-        "camera_operation_site_error": "Not editable in site patrol mode",
-        "camera_patrol": "Patrolling",
-        "camera_patrol_cruise_time": "Cruise time：{0} - {1}",
-        "camera_patrol_enable": "Enable patrolling",
-        "camera_preset_point": "Preset Point",
+        "camera_operation_site_error": "사이트 패트롤 모드에서는 편집할 수 없습니다.",
+        "camera_patrol": "순찰",
+        "camera_patrol_cruise_time": "크루즈 시간：{0} -{1}",
+        "camera_patrol_enable": "순찰 활성화",
+        "camera_preset_point": "프리셋 포인트",
         "camera_private_mode_sleep": "절전 모드",
         "camera_private_mode_sleep_close": "카메라 켜기",
         "camera_re_connect_stream": "다시 연결하는 중입니다. 잠시 기다려 주세요.",
-        "camera_restart_device_dialog_content": "Are you sure that you want to restart the device?",
-        "camera_select_patrol_mode": "Select a patrolling mode",
-        "camera_select_patrol_mode_panoramic": "Panoramic patrolling",
-        "camera_select_patrol_mode_panoramic_desc": "Camera will patrol every angle",
-        "camera_select_patrol_mode_site": "Site patrolling",
-        "camera_select_patrol_mode_site_desc": "The camera will patrol all sites and stay at each site for 10s",
-        "camera_set_patrol_time": "Select a patrolling time",
-        "camera_set_patrol_time_all_day": "All-day patrolling",
-        "camera_set_patrol_time_all_day_desc": "Patrolling will continue for 24x7 hours",
-        "camera_set_patrol_time_timed": "Timed patrolling",
-        "camera_set_patrol_time_timed_desc": "Patrolling will take effect as scheduled",
-        "camera_settings_anti_dismantle_topic": "Anti dismantle alarm",
-        "camera_settings_anti_flicker_50hz": "50 Hz",
-        "camera_settings_anti_flicker_60hz": "60 Hz",
-        "camera_settings_anti_flicker_topic": "Anti-flicker",
+        "camera_restart_device_dialog_content": "정말 디바이스를 다시 시작하시겠습니까?",
+        "camera_select_patrol_mode": "순찰 모드 선택",
+        "camera_select_patrol_mode_panoramic": "파노라마 순찰",
+        "camera_select_patrol_mode_panoramic_desc": "카메라가 모든 각도를 순찰합니다",
+        "camera_select_patrol_mode_site": "현장 순찰",
+        "camera_select_patrol_mode_site_desc": "카메라는 모든 사이트를 순찰하고 각 사이트에 10초 동안 머물게 됩니다.",
+        "camera_set_patrol_time": "순찰 시간 선택",
+        "camera_set_patrol_time_all_day": "종일 순찰",
+        "camera_set_patrol_time_all_day_desc": "순찰은 연중무휴 24시간 계속됩니다.",
+        "camera_set_patrol_time_timed": "시간 제한 순찰",
+        "camera_set_patrol_time_timed_desc": "순찰은 예정대로 시행됩니다.",
+        "camera_settings_anti_dismantle_topic": "해체 방지 알람",
+        "camera_settings_anti_flicker_50hz": "50 헤르츠",
+        "camera_settings_anti_flicker_60hz": "60 헤르츠",
+        "camera_settings_anti_flicker_topic": "안티-플리커",
         "camera_settings_button_text": "포맷",
-        "camera_settings_device_restart": "Device restart",
+        "camera_settings_device_restart": "디바이스 재시작",
         "camera_settings_format_sd_card_note": "모든 데이터는 삭제되며 복구할 수 없습니다.",
         "camera_settings_format_sd_card_topic": " SD 카드를 포맷하시겠습니까?",
-        "camera_settings_humanoid_focus_topic": "Humanoid focus",
+        "camera_settings_humanoid_focus_topic": "휴머노이드 포커스",
         "camera_settings_night_vision_description": "이 기능을 사용하면 저조도 또는 어두운 조건에서 이미지를 캡처할 수 있습니다. 이 기능은 다양한 애플리케이션에서 감시, 안전 및 상황 인식을 향상시킵니다.",
         "camera_settings_night_vision_firstbox_topic1": "자동",
         "camera_settings_night_vision_firstbox_topic1_description": "필요할 때만 야간 투시 모드 활성화",
@@ -16572,13 +16572,13 @@ export default {
         "camera_settings_night_vision_mode_topic": "야간 모드",
         "camera_settings_night_vision_topic": "야간 투시 모드",
         "camera_settings_onvif_ip_topic": "IP",
-        "camera_settings_onvif_ip_type_dynamic": "Dynamic IP",
-        "camera_settings_onvif_ip_type_static": "Static IP",
-        "camera_settings_onvif_ip_type_topic": "Onvif mode",
-        "camera_settings_onvif_set_password_tips": "The device password supports 8-32 characters and must contain uppercase and lowercase letters as well as digits.",
-        "camera_settings_onvif_switch_topic": "Onvif switch",
-        "camera_settings_onvif_topic": "Onvif",
-        "camera_settings_power_management_settings_topic": "Power Management Settings",
+        "camera_settings_onvif_ip_type_dynamic": "다이나믹 IP",
+        "camera_settings_onvif_ip_type_static": "스태틱 IP",
+        "camera_settings_onvif_ip_type_topic": "온비프 모드",
+        "camera_settings_onvif_set_password_tips": "기기 암호는 8~32자를 지원하며 대문자와 소문자, 숫자를 포함해야 합니다.",
+        "camera_settings_onvif_switch_topic": "온비프 스위치",
+        "camera_settings_onvif_topic": "온비프",
+        "camera_settings_power_management_settings_topic": "전원 관리 설정",
         "camera_settings_recording_mode_firstbox_topic1": "동작 트리거",
         "camera_settings_recording_mode_firstbox_topic1_description": "움직임이 감지된 경우에만 녹화합니다.",
         "camera_settings_recording_mode_firstbox_topic2": "연속",
@@ -16595,12 +16595,12 @@ export default {
         "camera_settings_talk_mode_firstbox_option2_topic": "양방향 통신",
         "camera_settings_talk_mode_secondtopic": "음성은 환경의 영향을 받을 수 있습니다. 상황에 따라 단방향 또는 양방향 통신을 사용하는 것이 좋습니다.",
         "camera_settings_talk_mode_topic": "대화 모드",
-        "camera_site": "Site",
-        "camera_site_delete_dialog_title": "Do you really want to delete the site?",
-        "camera_site_name": "Site name",
-        "camera_site_overview_empty_button_add_text": "Add site",
-        "camera_site_overview_empty_information_text": "You have not added a site yet",
-        "camera_site_overview_warning_max_number_text": "Maximum number of sites has been reached",
+        "camera_site": "사이트",
+        "camera_site_delete_dialog_title": "사이트를 정말로 삭제하시겠습니까?",
+        "camera_site_name": "사이트 이름",
+        "camera_site_overview_empty_button_add_text": "사이트 추가",
+        "camera_site_overview_empty_information_text": "아직 사이트를 추가하지 않으셨습니다",
+        "camera_site_overview_warning_max_number_text": "최대 사이트 수에 도달했습니다.",
         "camera_status_indicator": "상태 표시기",
         "camera_tile_camera_button_label_photo": "사진 촬영",
         "camera_tile_camera_button_label_video": "동영상 촬영",
@@ -16862,30 +16862,30 @@ export default {
         "country_scotland": "스코틀랜드",
         "country_selection_textfield_headline_search": "검색",
         "country_sy": "시리아",
-        "curation_calibration_callibrate_btn_text": "Calibrate",
-        "curation_calibration_nextbtn_text": "Next step",
+        "curation_calibration_callibrate_btn_text": "캘리브레이션",
+        "curation_calibration_nextbtn_text": "다음 단계",
         "current_temp_humidity": "현재 토양 온도 및 습도",
-        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
-        "curtain_calibration_progress_text": "Calibration in progress.....",
-        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_failed_text": "스마트 커튼의 보정 프로세스가 실패했습니다.",
+        "curtain_calibration_progress_text": "캘리브레이션 진행 중...",
+        "curtain_calibration_success_text": "스마트 커튼의 보정 프로세스가 성공적이었습니다.",
         "curtain_calibration_tryagin_text": "다시 시도",
-        "curtain_control_headline_text": "Curtain",
-        "curtain_control_title": "Curtain control",
-        "curtain_fast_calibration": "Fast calibration",
-        "curtain_fast_calibration_step1": "1. Take a stop watch.\n\n2. Close the curtains fully.\n\n3. Open the curtains fully and measure the time with stop watch from fully close to fully open.\n\n4. Click on \"Next Step\" and enter rounded up integer of seconds you measured with stop watch.",
-        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain from fully closed to fully open.",
-        "curtain_fast_toast_text": "Fast calibration is just allowed when the curtain is fully closed at 0%.",
-        "curtain_intelligent_calibration": "Intelligent calibration",
-        "curtain_intelligent_calibration_step1": "Please note for intelligent calibration, you need a wall switch to fully open/close the curtain. If you are not using a wall switch, please use the fast calibration mode.\n\n1. Install the curtain motor correctly before calibration so that the curtain can be fully opened/closed.\n\n2. Click “Next Step”.",
-        "curtain_intelligent_calibration_step2": "1. Press the wall switch to open the curtain until it is fully open.\n\n2. Press the wall switch to close the curtain until it is fully closed.\n\n3. Once the steps in 1 and 2 are done, then click “Calibrate\".",
-        "curtain_motor_steering": "Motor steering",
-        "curtain_motor_steering1": "Forward direction",
-        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
-        "curtain_motor_steering2": "Backward direction",
-        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
-        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
-        "curtain_summary_action_txt_1": "Open",
-        "curtain_summary_action_txt_2": "Close",
+        "curtain_control_headline_text": "커튼",
+        "curtain_control_title": "커튼 컨트롤",
+        "curtain_fast_calibration": "빠른 캘리브레이션",
+        "curtain_fast_calibration_step1": "1.스톱워치를 하세요.\n\n2.커튼을 완전히 닫으세요.\n\n3.커튼을 완전히 열고 스톱워치로 완전히 닫힌 상태에서 완전히 열린 상태까지 시간을 측정하세요.\n\n4.“다음 단계”를 클릭하고 스톱워치로 측정한 시간을 반올림한 정수 (초) 를 입력합니다.",
+        "curtain_fast_calibration_step2": "커튼이 완전히 닫힌 상태에서 완전히 열리는 시간까지 필요한 시간을 입력하십시오.",
+        "curtain_fast_toast_text": "커튼이 0% 로 완전히 닫혔을 때만 빠른 보정이 가능합니다.",
+        "curtain_intelligent_calibration": "지능형 캘리브레이션",
+        "curtain_intelligent_calibration_step1": "지능형 캘리브레이션을 위해서는 커튼을 완전히 열고 닫으려면 벽 스위치가 필요하다는 점에 유의하세요.월 스위치를 사용하지 않는 경우 고속 보정 모드를 사용하십시오.\n\n1.커튼을 완전히 열거나 닫을 수 있도록 보정 전에 커튼 모터를 올바르게 설치하십시오.\n\n2.“다음 단계”를 클릭합니다.",
+        "curtain_intelligent_calibration_step2": "1.커튼이 완전히 열릴 때까지 벽 스위치를 눌러 커튼을 엽니다.\n\n2.커튼이 완전히 닫힐 때까지 벽 스위치를 눌러 커튼을 닫습니다.\n\n3.1과 2의 단계가 완료되면 “보정”을 클릭합니다.",
+        "curtain_motor_steering": "모터 스티어링",
+        "curtain_motor_steering1": "전진 방향",
+        "curtain_motor_steering1_description": "커튼 모터가 정방향으로 작동합니다.",
+        "curtain_motor_steering2": "역방향",
+        "curtain_motor_steering2_description": "커튼 모터가 역방향으로 작동합니다.",
+        "curtain_motor_steering_tip": "커튼의 모터 조향 방향을 구성하려면",
+        "curtain_summary_action_txt_1": "열기",
+        "curtain_summary_action_txt_2": "닫기",
         "daily": "일간",
         "date": "날짜",
         "date_type": "날짜 유형",
@@ -17028,13 +17028,13 @@ export default {
         "history_socket_headline_text": "이력",
         "home_screen_home_dialog_yes_con": "알겠습니다.",
         "humidity": "습기",
-        "hybrid_headline_text": "Hybrid switch",
-        "hybrid_switchstate_setting1": "Setting 1",
-        "hybrid_switchstate_setting2": "Setting 2",
-        "hybrid_switchstate_setting3": "Setting 3",
-        "hybrid_switchstate_setting3_description": "Switch button",
-        "hybrid_switchstate_setting_text": "Switch state setting",
-        "hybrid_switchstate_title": "Switch state",
+        "hybrid_headline_text": "하이브리드 스위치",
+        "hybrid_switchstate_setting1": "설정 1",
+        "hybrid_switchstate_setting2": "설정 2",
+        "hybrid_switchstate_setting3": "설정 3",
+        "hybrid_switchstate_setting3_description": "스위치 버튼",
+        "hybrid_switchstate_setting_text": "스위치 상태 설정",
+        "hybrid_switchstate_title": "스위치 상태",
         "infobutton_totalenergy": "총 에너지에는 마지막 재설정 이후의 총 소비/발전량 데이터만 표시됩니다.\n데이터는 다음 날에 켜졌습니다:",
         "intermittent_time": "간헐적 시간",
         "irrigation": "관개",
@@ -17178,16 +17178,16 @@ export default {
         "motion_detection_add_time_schedule_headline_text": "일정 추가",
         "motion_detection_add_time_schedule_selectionfield_text": "이름",
         "motion_detection_add_time_schedule_system_back_text": "일정",
-        "motion_detection_alarm_interval": "Alarm Interval",
+        "motion_detection_alarm_interval": "알람 간격",
         "motion_detection_cloud_camera_settings_text": "활동 영역",
         "motion_detection_cloud_camera_settings_text2": "활동 영역 변경",
         "motion_detection_description_text": "움직임이 감지될 때 선택하는 옵션입니다.",
-        "motion_detection_detect_baby_crying": "Baby cry detection",
+        "motion_detection_detect_baby_crying": "아기 울음 감지",
         "motion_detection_headline_text": "동작 감지 센서",
         "motion_detection_no_safe_mode_text": "조명으로  알림",
         "motion_detection_no_safe_mode_trigger_text": "시작 조건 알림",
-        "motion_detection_pir": "Motion detection level",
-        "motion_detection_select_detection_sensitivity_level": "Detection sensitivity level",
+        "motion_detection_pir": "움직임 감지 수준",
+        "motion_detection_select_detection_sensitivity_level": "감지 감도 수준",
         "motion_detection_selectionfield2_topic_text": "조도 값",
         "motion_detection_selectionfield2_value2_text": "300(새벽)",
         "motion_detection_selectionfield2_value3_text": "50 (저녁)",
@@ -17195,7 +17195,7 @@ export default {
         "motion_detection_selectionfield2_value5_text": "5(심야)",
         "motion_detection_selectionfield2_value_text": "2000(낮)",
         "motion_detection_selectionfield_topic_text": "시작 조건 정확도",
-        "motion_detection_sound_detection": "Sound detection",
+        "motion_detection_sound_detection": "사운드 감지",
         "motion_detection_standby_light_brightness_text": "대기 조명등 밝기",
         "motion_detection_standby_light_text1": "대기 조명등",
         "motion_detection_standby_light_text2": "일정 시간 후 꺼짐",
@@ -17206,7 +17206,7 @@ export default {
         "motion_detection_time_schedule_notifications_field_weekdays_text4": "매일",
         "motion_detection_time_schedule_notifications_warning_text": "최대 일정 수에 도달했습니다.",
         "motion_detection_trigger_text": "조명으로  알림",
-        "motion_detection_video_recording_duration": "Video recording duration",
+        "motion_detection_video_recording_duration": "비디오 녹화 시간",
         "motion_detection_with_safe_mode_brightness_text": "조명 밝기",
         "motion_detection_with_safe_mode_safetymode_sensing_text": "감지 거리",
         "motion_detection_with_safe_mode_safetymode_value4_text": "사용자 지정 모드",
@@ -17229,11 +17229,11 @@ export default {
         "plug_energyconsumptionswitch": "에너지 소비 모드로 전환",
         "plug_energygenerationswitch": "에너지 생성 모드로 전환",
         "pos_mode_switching_fail_tips": "비밀번호가 잘못되었습니다.정확한 비밀번호를 확인하고 입력하세요.",
-        "power_management_battery_remaining": "Remaining battery level",
-        "power_management_low_battery_alarm_threshold": "Set the level the battery should have for the alarm to start",
-        "power_management_power_source": "Power source",
+        "power_management_battery_remaining": "배터리 잔량",
+        "power_management_low_battery_alarm_threshold": "알람이 시작될 때 필요한 배터리 수준을 설정합니다.",
+        "power_management_power_source": "전원 공급원",
         "power_management_power_source_battery": "배터리",
-        "power_management_power_source_power_cable": "Power cable",
+        "power_management_power_source_power_cable": "전원 케이블",
         "power_off_memory_customized_description": "색상 및 밝기 값의 사용자 정의 선택.",
         "power_off_memory_default_state_description": "기본 색상 및 밝기 값으로 돌아갑니다.",
         "power_off_memory_default_state_title": "기본 상태",
@@ -17245,10 +17245,10 @@ export default {
         "power_strip_feature_2_socket_2_text_min_on": "{0}분 후에 콘센트 2 켜짐",
         "power_strip_feature_2_socket_3_text_min_off": "{0}분 후에 콘센트 3 꺼짐",
         "power_strip_feature_2_socket_3_text_min_on": "{0}분 후에 콘센트 3 켜짐",
-        "power_strip_feature_2_socket_4_text_min_off": "Socket 4 will be switched off in {0} ",
-        "power_strip_feature_2_socket_4_text_min_on": "Socket 4 will be switched on in {0}",
-        "power_strip_feature_2_socket_5_text_min_off": "Socket 5 will be switched off in {0}",
-        "power_strip_feature_2_socket_5_text_min_on": "Socket 5 will be switched on in {0}",
+        "power_strip_feature_2_socket_4_text_min_off": "소켓 4는 {0} 후에 꺼집니다. ",
+        "power_strip_feature_2_socket_4_text_min_on": "소켓 4는 {0} 후에 켜집니다.",
+        "power_strip_feature_2_socket_5_text_min_off": "소켓 5는 {0} 후에 꺼집니다.",
+        "power_strip_feature_2_socket_5_text_min_on": "소켓 5는 {0} 후에 켜집니다.",
         "power_strip_feature_2_socket_usb_text_min_off": "{0}분 후에 USB 소켓 꺼짐",
         "power_strip_feature_2_socket_usb_text_min_on": "{0}분 후에 USB 소켓 켜짐",
         "power_strip_specific_settings_desc_socket_1": "콘센트 1 설명",
@@ -17258,8 +17258,8 @@ export default {
         "power_strip_tile_socket_1_headline": "콘센트 1",
         "power_strip_tile_socket_2_headline": "콘센트 2",
         "power_strip_tile_socket_3_headline": "콘센트 3",
-        "power_strip_tile_socket_4_headline": "Socket 4",
-        "power_strip_tile_socket_5_headline": "Socket 5",
+        "power_strip_tile_socket_4_headline": "소켓 4",
+        "power_strip_tile_socket_5_headline": "소켓 5",
         "power_strip_tile_socket_usb_headline": "USB 포트",
         "privatemode_description": "집에 있을 때 사용자의 개인 정보를 보호하기 위해 카메라의 오디오 및 비디오 전송 채널을 닫습니다.",
         "push_notifications_contact_sensor_door_closing_title": "마감 알림",
@@ -17304,16 +17304,16 @@ export default {
         "smoke_alerteffect": "연기 감지",
         "smoke_alertfree": "연기가 감지되지 않음",
         "smoke_equipmentselftest": "장비 자체 테스트",
-        "socket1_active_timer_field_small_off_text": "Socket 1 off in {0}",
-        "socket1_active_timer_field_small_on_text": "Socket 1 on in {0}",
-        "socket2_active_timer_field_small_off_text": "Socket 2 off in {0}",
-        "socket2_active_timer_field_small_on_text": "Socket 2 on in {0}",
-        "socket3_active_timer_field_small_off_text": "Socket 3 off in {0}",
-        "socket3_active_timer_field_small_on_text": "Socket 3 on in {0}",
-        "socket4_active_timer_field_small_off_text": "Socket 4 off in {0}",
-        "socket4_active_timer_field_small_on_text": "Socket 4 on in {0}",
-        "socket5_active_timer_field_small_off_text": "Socket 5 off in {0}",
-        "socket5_active_timer_field_small_on_text": "Socket 5 on in {0}",
+        "socket1_active_timer_field_small_off_text": "소켓 1 꺼짐 in {0}",
+        "socket1_active_timer_field_small_on_text": "소켓 1 {0}",
+        "socket2_active_timer_field_small_off_text": "소켓 2 꺼짐 {0}",
+        "socket2_active_timer_field_small_on_text": "소켓 2 {0}",
+        "socket3_active_timer_field_small_off_text": "소켓 3 꺼짐 {0}",
+        "socket3_active_timer_field_small_on_text": "소켓 3 {0}",
+        "socket4_active_timer_field_small_off_text": "소켓 4 꺼짐 in {0}",
+        "socket4_active_timer_field_small_on_text": "소켓 4 {0}",
+        "socket5_active_timer_field_small_off_text": "소켓 5 꺼짐 in {0}",
+        "socket5_active_timer_field_small_on_text": "소켓 5 {0}",
         "socket_settings_firstbox_status1_description": "장치 꺼진 상태로 유지",
         "socket_settings_firstbox_status2_description": "장치 전원이 켜진 상태로 유지",
         "socket_settings_firstbox_status3_description": "전원이 꺼지기 전의 상태로 돌아갑니다.",
@@ -17330,8 +17330,8 @@ export default {
         "sockets_specific_settings_relay_status": "전원 켜기 동작",
         "sockets_specific_settings_relay_status_remember": "마지막 상태 기억하기",
         "sockets_specific_settings_switch_inching": "자동 스위치 끄기 ",
-        "socketusb_active_timer_field_small_off_text": "USB off in {0}",
-        "socketusb_active_timer_field_small_on_text": "USB on in {0}",
+        "socketusb_active_timer_field_small_off_text": "USB 꺼짐 {0}",
+        "socketusb_active_timer_field_small_on_text": "USB 켜짐 {0}",
         "software_update_found_failed_update_error_5012": "장치가 오프라인 상태입니다.",
         "solar_bt_pp_battery_headline": "배터리",
         "solar_bt_pp_field_dm": "다이나믹 무드",
@@ -17423,52 +17423,52 @@ export default {
         "striplight_adaptbutton": "적응",
         "striplight_lengthadaptationtext": "스트립 라이트가 잘린 경우 앱에서 길이를 조정하여 조정할 수 있습니다.",
         "striplight_lengthtitle": "스트립 라이트 길이",
-        "switch1_active_timer_field_small_off_text": "Switch 1 off at {0}",
-        "switch1_active_timer_field_small_on_text": "Switch 1 on at {0}",
-        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
-        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
-        "switch_4channelfunctions1": "Switch 1",
-        "switch_4channelfunctions2": "Switch 2",
-        "switch_4channelfunctions3": "Switch 3",
-        "switch_4channelfunctions4": "Switch 4",
-        "switch_4channels1setting": "Switch 1 setting",
-        "switch_4channels2setting": "Switch 2 setting",
-        "switch_4channels3setting": "Switch 3 setting",
-        "switch_4channels4setting": "Switch 4 setting",
-        "switch_active_timer_field_small_off_text": "Switch off in {0}",
-        "switch_active_timer_field_small_on_text": "Switch on in {0}",
-        "switch_doublepress": "Double press",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "Allows only one switch to be turned on at a time",
-        "switch_longpress": "Long press",
+        "switch1_active_timer_field_small_off_text": "1을 끄세요{0}",
+        "switch1_active_timer_field_small_on_text": "{0} 에서 스위치 1 켜기",
+        "switch2_active_timer_field_small_off_text": "스위치 2 입력 끄기 {0}",
+        "switch2_active_timer_field_small_on_text": "스위치 2 입력 {0}",
+        "switch_4channelfunctions1": "스위치 1",
+        "switch_4channelfunctions2": "스위치 2",
+        "switch_4channelfunctions3": "스위치 3",
+        "switch_4channelfunctions4": "스위치 4",
+        "switch_4channels1setting": "스위치 1 설정",
+        "switch_4channels2setting": "스위치 2 설정",
+        "switch_4channels3setting": "스위치 3 설정",
+        "switch_4channels4setting": "스위치 4 설정",
+        "switch_active_timer_field_small_off_text": "스위치 인 {0}",
+        "switch_active_timer_field_small_on_text": "스위치 온 {0}",
+        "switch_doublepress": "더블 프레스",
+        "switch_interlock": "인터로킹",
+        "switch_interlock_addbtn_text": "인터록 추가",
+        "switch_interlock_addtitle": "새 인터록 추가",
+        "switch_interlock_delete_popup_topic": "인터록을 정말로 삭제하시겠습니까?",
+        "switch_interlock_editbtn_text": "인터록 삭제",
+        "switch_interlock_edittitle": "인터록 편집",
+        "switch_interlockingdescription": "한 번에 하나의 스위치만 켤 수 있습니다.",
+        "switch_longpress": "길게 누르기",
         "switch_overcharge_headline_description": "이 기능은 휴대폰 및 보조 배터리를 비롯한 모바일 장치가 완전히 충전되면 자동으로 충전 기능을 끄므로 과충전을 방지하고 배터리 수명을 연장합니다.",
         "switch_overcharge_headline_text": "과충전 보호",
-        "switch_singlepress": "Single press",
+        "switch_singlepress": "싱글 프레스",
         "switchdescription_energy": "총 에너지 데이터는 초기화되며 다시 복구할 수 없다는 점에 유의하세요.",
         "switchinching_overview_description_text": "일정 시간이 지나면 자동으로 장치를 끕니다.",
-        "switchmodule_switch1description": "Switch 1 description",
-        "switchmodule_switch1title": "Switch 1",
-        "switchmodule_switch2description": "Switch 2 description",
-        "switchmodule_switch2title": "Switch 2",
-        "switchmodule_switchdescription": "Switch description",
+        "switchmodule_switch1description": "스위치 1 설명",
+        "switchmodule_switch1title": "스위치 1",
+        "switchmodule_switch2description": "스위치 2 설명",
+        "switchmodule_switch2title": "스위치 2",
+        "switchmodule_switchdescription": "스위치 설명",
         "switchmodule_switchtitle": "전환",
-        "switchmodule_typesetting": "Switch state",
-        "switchmodule_typesetting1": "Each toggle of the wall switch triggers a change in the device's state.",
-        "switchmodule_typesetting2": "Wall switch positions correspond to fixed ON and OFF states. Turning the switch ON sets the device to ON; if it's already ON, the command is ignored and the state remains unchanged.",
-        "switchmodule_typesetting3": "If your wall switch only stays in the ON position while being pressed and automatically returns to OFF when released, it behaves like a momentary (impulse) switch.",
-        "switchmodule_typesettingdescription": "To configure the switch state setting",
-        "switchname_1channel": "Smart switch 1 channel",
-        "switchname_2channel": "Smart switch 2 channel",
-        "switchname_4channel": "Smart switch 4 channel",
+        "switchmodule_typesetting": "스위치 상태",
+        "switchmodule_typesetting1": "벽 스위치를 토글할 때마다 장치 상태가 변경됩니다.",
+        "switchmodule_typesetting2": "벽 스위치 위치는 고정된 ON 및 OFF 상태에 해당합니다.스위치를 켜면 장치가 ON으로 설정됩니다. 이미 ON인 경우 명령이 무시되고 상태는 변경되지 않습니다.",
+        "switchmodule_typesetting3": "벽면 스위치를 눌렀을 때만 ON 위치에 있다가 놓으면 자동으로 OFF로 돌아가는 경우 순간 (임펄스) 스위치처럼 작동합니다.",
+        "switchmodule_typesettingdescription": "스위치 상태 설정을 구성하려면",
+        "switchname_1channel": "스마트 스위치 1채널",
+        "switchname_2channel": "스마트 스위치 2채널",
+        "switchname_4channel": "스마트 스위치 4채널",
         "switchonlyonce": "모드 전환은 하루에 한 번만 허용됩니다.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "로커 스위치",
+        "switchstate2selection": "싱크로나이즈드 로커 스위치",
+        "switchstate3selection": "푸시 버튼",
         "switchtitle_energyconsumption": "정말 에너지 소비로 전환하고 싶으신가요?",
         "switchtitle_energygeneration": "정말 에너지 발전으로 전환하고 싶으신가요?",
         "temperature": "온도",
@@ -17517,7 +17517,7 @@ export default {
         "thermostat_vacationplan": "휴가 계획",
         "thermostat_warm": "편안함",
         "third_irrigation": "세 번째 관개",
-        "time_format": "Time format",
+        "time_format": "시간 형식",
         "time_unit_h": "h",
         "timer_ceiling_fan_headline_text": "타이머",
         "timer_ceiling_fan_lighting_switched_off_text": "조명은 약 {0}에 꺼집니다.",
@@ -17532,12 +17532,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "소켓1은 약 {0}에 꺼집니다.",
         "timer_powerstrip_socket1_switched_on_text": "소켓1은 약 {0}에 켜집니다.",
         "timer_sockets_button_text": "시작",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "스위치 1은 약 {0} 에 꺼집니다.",
+        "timer_switch1_active_timer_field_description_on_text": "스위치 1은 약 {0} 에 켜질 것입니다.",
+        "timer_switch2_active_timer_field_description_off_text": "스위치 2는 약 {0} 에 꺼집니다.",
+        "timer_switch2_active_timer_field_description_on_text": "스위치 2는 약 {0} 에 켜질 것입니다.",
+        "timer_switch_active_timer_field_description_off_text": "스위치는 약 {0} 에 꺼집니다.",
+        "timer_switch_active_timer_field_description_on_text": "스위치는 약 {0} 에 켜질 것입니다.",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "보조 조명",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "주 조명",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "조명",
@@ -17691,8 +17691,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Atšaukti",
         "btsolar_groups_inductionsync": "Judesio aptikimo sinchronizavimas",
         "btsolar_groups_inductionsync_description": "Sinchronizuoti visų lempų judesio jutiklį, kad vienai iš jų aptikus judesį įsijungtų ir kitos.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Kameros kalibravimas",
+        "camera_calibration_desc": "Kameros kalibravimas trunka apie 25 sekundes. Ar norite tęsti?",
         "camera_edit_site_name": "Redaguoti patalpos pavadinimą",
         "camera_errmsg_site_point_limit": "Nepavyko įjungti patalpos patruliavimo, nes pridėta mažiau nei 2 patalpos.",
         "camera_feature_1_headline": "Sirena",
@@ -18863,8 +18863,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Atcelt",
         "btsolar_groups_inductionsync": "Kustības noteikšanas sinhronizācija",
         "btsolar_groups_inductionsync_description": "Sinhronizēt visu gaismekļu kustības sensoru tā, lai, ja viens no tiem atklāj kustību, ieslēgtos arī citi.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Kameras kalibrēšana",
+        "camera_calibration_desc": "Kameras kalibrēšana aizņem apmēram 25 sekundes. Vai vēlaties turpināt?",
         "camera_edit_site_name": "Rediģēt vietnes nosaukumu",
         "camera_errmsg_site_point_limit": "Neizdevās iespējot vietnes patrulēšanu, jo tika pievienotas mazāk nekā 2 vietnes.",
         "camera_feature_1_headline": "Sirēna",
@@ -18875,7 +18875,7 @@ export default {
         "camera_local_recording": "Vietējā ierakstīšana",
         "camera_mic_two_way_talking": "Zvana......",
         "camera_net_err": "Ierīces savienojums ir pārtraukts, lūdzu, pārbaudiet ierīci un tās tīklu.",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "Vietnes patruļas režīmā nav rediģējams",
         "camera_patrol": "Patrulēšana",
         "camera_patrol_cruise_time": "Kruīza laiks:{0} - {1}",
         "camera_patrol_enable": "Iespējot patrulēšanu",
@@ -19788,7 +19788,7 @@ export default {
         "switch_interlock_delete_popup_topic": "Vai tiešām vēlaties dzēst bloķēšanu?",
         "switch_interlock_editbtn_text": "Dzēst bloķēšanu",
         "switch_interlock_edittitle": "Rediģēt bloķēšanu",
-        "switch_interlockingdescription": "Vienlaicīgi atļaut darboties tikai ar vienu slēdzi.",
+        "switch_interlockingdescription": "Vienlaicīgi var ieslēgt tikai vienu slēdzi.",
         "switch_longpress": "Ilgi nospiediet",
         "switch_overcharge_headline_description": "Šī funkcija automātiski izslēdz mobilo ierīču, tostarp mobilo tālruņu un barošanas bateriju, uzlādi, kad tās ir pilnībā uzlādētas, lai novērstu to pārmērīgu uzlādi un pagarinātu baterijas darbības laiku.",
         "switch_overcharge_headline_text": "Aizsardzība pret pārmērīgu uzlādi",
@@ -19810,9 +19810,9 @@ export default {
         "switchname_2channel": "Smart switch 2 kanāls",
         "switchname_4channel": "Viedais slēdzis 4 kanāls",
         "switchonlyonce": "Režīmu pārslēgšana ir atļauta tikai vienu reizi dienā.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Pārslēdzējs",
+        "switchstate2selection": "Sinhronizēts slēdzis",
+        "switchstate3selection": "Nospiest pogu",
         "switchtitle_energyconsumption": "Vai tiešām vēlaties pāriet uz enerģijas patēriņu?",
         "switchtitle_energygeneration": "Vai tiešām vēlaties pāriet uz enerģijas ražošanu?",
         "temperature": "Temperatūra",
@@ -20035,8 +20035,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Avbryt",
         "btsolar_groups_inductionsync": "Synkronisering av bevegelsesdeteksjon",
         "btsolar_groups_inductionsync_description": "For å synkronisere bevegelsessensoren til alle lampene slik at hvis en av dem oppdager en bevegelse, vil de andre også slå seg på.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Kamerakalibrering",
+        "camera_calibration_desc": "Kamerakalibrering tar omtrent 25 sekunder. Vil du fortsette?",
         "camera_edit_site_name": "Rediger navn på område",
         "camera_errmsg_site_point_limit": "Kan ikke aktivere områdepatrulje fordi færre enn 2 områder ble lagt til.",
         "camera_feature_1_headline": "Sirene",
@@ -20047,7 +20047,7 @@ export default {
         "camera_local_recording": "Lokalt opptak",
         "camera_mic_two_way_talking": "Ringer.....",
         "camera_net_err": "Enhetsforbindelsen er avbrutt, vennligst sjekk enheten og nettverket",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "Kan ikke redigeres i nettstedspatruljemodus",
         "camera_patrol": "Patruljering",
         "camera_patrol_cruise_time": "Cruise time：{0} - {1}",
         "camera_patrol_enable": "Aktiver patruljering",
@@ -20982,9 +20982,9 @@ export default {
         "switchname_2channel": "Smartbryter 2 kanal",
         "switchname_4channel": "Smartbryter 4 kanal",
         "switchonlyonce": "Det er bare tillatt å bytte modus én gang om dagen.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Vippebryter",
+        "switchstate2selection": "Synkronisert vippebryter",
+        "switchstate3selection": "Trykknapp",
         "switchtitle_energyconsumption": "Ønsker du virkelig å bytte til energiforbruk?",
         "switchtitle_energygeneration": "Ønsker du virkelig å bytte til energiproduksjon?",
         "temperature": "Temperatur",
@@ -22146,9 +22146,9 @@ export default {
         "switchmodule_switchdescription": "Beschrijving schakelaar",
         "switchmodule_switchtitle": "Switch",
         "switchmodule_typesetting": "Status schakelaar",
-        "switchmodule_typesetting1": "Elke schakelaar van de wandschakelaar activeert een verandering in de toestand van het apparaat.",
-        "switchmodule_typesetting2": "De posities van de wandschakelaars komen overeen met de vaste AAN- en UIT-standen. Door de schakelaar op AAN te zetten, wordt het apparaat op AAN gezet; als het al AAN is, wordt de opdracht genegeerd en blijft de status ongewijzigd.",
-        "switchmodule_typesetting3": "Als uw wandschakelaar alleen in de AAN-positie blijft staan terwijl u hem indrukt en automatisch terugkeert naar de UIT-positie wanneer u hem loslaat, gedraagt deze zich als een momentschakelaar (impulsschakelaar).",
+        "switchmodule_typesetting1": "Omdraaien om de schakeltoestand te wijzigen",
+        "switchmodule_typesetting2": "Synchroon met de huidige schakeltoestand",
+        "switchmodule_typesetting3": "Reset naar de nieuwe status",
         "switchmodule_typesettingdescription": "De instelling van de schakeltoestand configureren",
         "switchname_1channel": "Smart-schakelaar 1 kanaal",
         "switchname_2channel": "Smart-schakelaar 2-kanaal",
@@ -22379,8 +22379,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Anuluj",
         "btsolar_groups_inductionsync": "Synchronizacja wykrywania ruchu",
         "btsolar_groups_inductionsync_description": "Aby zsynchronizować czujnik ruchu wszystkich lamp tak, aby jeśli jedna z nich wykryje ruch, włączą się również pozostałe.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Kalibracja kamery",
+        "camera_calibration_desc": "Kalibracja aparatu trwa około 25 sekund. Chcesz kontynuować?",
         "camera_edit_site_name": "Edytowanie nazwy terenu",
         "camera_errmsg_site_point_limit": "Nie można włączyć patrolowania witryny, ponieważ dodano mniej niż 2 witryny.",
         "camera_feature_1_headline": "Syreny",
@@ -22391,7 +22391,7 @@ export default {
         "camera_local_recording": "Nagrywanie lokalne",
         "camera_mic_two_way_talking": "Dzwonię...",
         "camera_net_err": "Połączenie z urządzeniem zostało przerwane. Sprawdź urządzenie i jego sieć.",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "Nie można edytować w trybie patrolowania witryny",
         "camera_patrol": "Patrolowanie",
         "camera_patrol_cruise_time": "Czas rejsu：{0} - {1}",
         "camera_patrol_enable": "Włącz patrolowanie",
@@ -22418,7 +22418,7 @@ export default {
         "camera_settings_device_restart": "Restart urządzenia",
         "camera_settings_format_sd_card_note": "Pamiętaj, że wszystkie Twoje dane zostaną usunięte i nie będzie można ich odzyskać.",
         "camera_settings_format_sd_card_topic": "Czy na pewno chcesz sformatować kartę SD?",
-        "camera_settings_humanoid_focus_topic": "Humanoid focus",
+        "camera_settings_humanoid_focus_topic": "Humanoidalne skupienie",
         "camera_settings_night_vision_description": "Funkcja ta umożliwia robienie zdjęć w warunkach słabego oświetlenia lub w ciemności. Funkcja ta zwiększa nadzór, bezpieczeństwo i świadomość sytuacyjną w różnych zastosowaniach.",
         "camera_settings_night_vision_firstbox_topic1": "Automatycznie",
         "camera_settings_night_vision_firstbox_topic1_description": "Aktywuje tryb nocny tylko w razie potrzeby",
@@ -23105,8 +23105,8 @@ export default {
         "power_strip_feature_2_socket_2_text_min_on": "Gniazdo 2 włączone w {0} min",
         "power_strip_feature_2_socket_3_text_min_off": "Gniazdo 3 wyłączone w {0} min",
         "power_strip_feature_2_socket_3_text_min_on": "Gniazdo 3 włączone w {0} min",
-        "power_strip_feature_2_socket_4_text_min_off": "Socket 4 will be switched off in {0} ",
-        "power_strip_feature_2_socket_4_text_min_on": "Socket 4 will be switched on in {0}",
+        "power_strip_feature_2_socket_4_text_min_off": "Gniazdo 4 zostanie wyłączone za {0} ",
+        "power_strip_feature_2_socket_4_text_min_on": "Gniazdo 4 zostanie włączone za {0}",
         "power_strip_feature_2_socket_5_text_min_off": "Gniazdo 5 zostanie wyłączone w {0}",
         "power_strip_feature_2_socket_5_text_min_on": "Gniazdo 5 zostanie włączone w {0}",
         "power_strip_feature_2_socket_usb_text_min_off": "Gniazdo USB wyłączone w {0} min",
@@ -23326,9 +23326,9 @@ export default {
         "switchname_2channel": "Inteligentny przełącznik 2-kanałowy",
         "switchname_4channel": "Inteligentny przełącznik 4-kanałowy",
         "switchonlyonce": "Przełączanie trybu jest dozwolone tylko raz dziennie.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Przełącznik kołyskowy",
+        "switchstate2selection": "Zsynchronizowany przełącznik kołyskowy",
+        "switchstate3selection": "Przycisk",
         "switchtitle_energyconsumption": "Czy naprawdę chcesz przejść na zużycie energii?",
         "switchtitle_energygeneration": "Czy naprawdę chcesz przejść na wytwarzanie energii?",
         "temperature": "temperatura",
@@ -24723,10 +24723,10 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Anulare",
         "btsolar_groups_inductionsync": "Sincronizare detectare mișcare",
         "btsolar_groups_inductionsync_description": "Pentru a sincroniza senzorul de mișcare al tuturor lămpilor, astfel încât dacă una dintre ele detectează o mișcare, atunci și celelalte se vor aprinde.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
-        "camera_edit_site_name": "Edit Site name",
-        "camera_errmsg_site_point_limit": "Failed to enable site patrol because less than 2 sites were added.",
+        "camera_calibration": "Calibrarea camerei",
+        "camera_calibration_desc": "Calibrarea camerei durează aproximativ 25 de secunde. Doriți să continuați?",
+        "camera_edit_site_name": "Editați numele site-ului",
+        "camera_errmsg_site_point_limit": "Nu s-a putut activa patrularea site-ului deoarece au fost adăugate mai puțin de 2 site-uri.",
         "camera_feature_1_headline": "Alarmă",
         "camera_feature_2_headline": "Microfon",
         "camera_feature_5_headline": "Înregistrări",
@@ -24735,34 +24735,34 @@ export default {
         "camera_local_recording": "Înregistrare locală",
         "camera_mic_two_way_talking": "Se apelează…",
         "camera_net_err": "Conexiunea dispozitivului este întreruptă, vă rugăm să verificați dispozitivul și rețeaua acestuia",
-        "camera_operation_site_error": "Not editable in site patrol mode",
-        "camera_patrol": "Patrolling",
-        "camera_patrol_cruise_time": "Cruise time：{0} - {1}",
-        "camera_patrol_enable": "Enable patrolling",
-        "camera_preset_point": "Preset Point",
+        "camera_operation_site_error": "Nu se poate edita în modul de patrulare a site-ului",
+        "camera_patrol": "Patrulare",
+        "camera_patrol_cruise_time": "Timp de croazieră: {0} - {1}",
+        "camera_patrol_enable": "Activează patrularea",
+        "camera_preset_point": "Punct presetat",
         "camera_private_mode_sleep": "Dispozitiv în modul de repaus",
         "camera_private_mode_sleep_close": "Porniți camera",
         "camera_re_connect_stream": "În curs de reconectare, așteptați",
-        "camera_restart_device_dialog_content": "Are you sure that you want to restart the device?",
-        "camera_select_patrol_mode": "Select a patrolling mode",
-        "camera_select_patrol_mode_panoramic": "Panoramic patrolling",
-        "camera_select_patrol_mode_panoramic_desc": "Camera will patrol every angle",
-        "camera_select_patrol_mode_site": "Site patrolling",
-        "camera_select_patrol_mode_site_desc": "The camera will patrol all sites and stay at each site for 10s",
-        "camera_set_patrol_time": "Select a patrolling time",
-        "camera_set_patrol_time_all_day": "All-day patrolling",
-        "camera_set_patrol_time_all_day_desc": "Patrolling will continue for 24x7 hours",
-        "camera_set_patrol_time_timed": "Timed patrolling",
-        "camera_set_patrol_time_timed_desc": "Patrolling will take effect as scheduled",
-        "camera_settings_anti_dismantle_topic": "Anti dismantle alarm",
+        "camera_restart_device_dialog_content": "Sigur vrei să repornești dispozitivul?",
+        "camera_select_patrol_mode": "Selectați un mod de patrulare",
+        "camera_select_patrol_mode_panoramic": "Patrulare panoramică",
+        "camera_select_patrol_mode_panoramic_desc": "Camera va patrula din fiecare unghi",
+        "camera_select_patrol_mode_site": "Patrulare la fața locului",
+        "camera_select_patrol_mode_site_desc": "Camera va patrula toate locațiile și va rămâne la fiecare locație timp de 10 secunde.",
+        "camera_set_patrol_time": "Selectați o oră de patrulare",
+        "camera_set_patrol_time_all_day": "Patrulare toată ziua",
+        "camera_set_patrol_time_all_day_desc": "Patrularea va continua 24/7",
+        "camera_set_patrol_time_timed": "Patrulare temporizată",
+        "camera_set_patrol_time_timed_desc": "Patrularea va intra în vigoare conform programării.",
+        "camera_settings_anti_dismantle_topic": "Alarmă anti-demontare",
         "camera_settings_anti_flicker_50hz": "50 Hz",
         "camera_settings_anti_flicker_60hz": "60 Hz",
-        "camera_settings_anti_flicker_topic": "Anti-flicker",
+        "camera_settings_anti_flicker_topic": "Anti-pâlpâire",
         "camera_settings_button_text": "Formatare",
-        "camera_settings_device_restart": "Device restart",
+        "camera_settings_device_restart": "Repornirea dispozitivului",
         "camera_settings_format_sd_card_note": "Rețineți că toate datele dvs. vor fi șterse și nu pot fi recuperate",
         "camera_settings_format_sd_card_topic": "Chiar doriți să formatați cardul SD?",
-        "camera_settings_humanoid_focus_topic": "Humanoid focus",
+        "camera_settings_humanoid_focus_topic": "Focalizare umanoidă",
         "camera_settings_night_vision_description": "Această funcție permite captarea imaginilor în condiții de lumină scăzută sau întuneric. Această caracteristică îmbunătățește supravegherea, siguranța și conștientizarea situației în diverse aplicații.",
         "camera_settings_night_vision_firstbox_topic1": "Automat",
         "camera_settings_night_vision_firstbox_topic1_description": "Activează vederea pe timp de noapte doar atunci când este necesar",
@@ -24776,13 +24776,13 @@ export default {
         "camera_settings_night_vision_mode_topic": "Modul noapte",
         "camera_settings_night_vision_topic": "Vedere pe timp de noapte",
         "camera_settings_onvif_ip_topic": "IP",
-        "camera_settings_onvif_ip_type_dynamic": "Dynamic IP",
-        "camera_settings_onvif_ip_type_static": "Static IP",
-        "camera_settings_onvif_ip_type_topic": "Onvif mode",
-        "camera_settings_onvif_set_password_tips": "The device password supports 8-32 characters and must contain uppercase and lowercase letters as well as digits.",
-        "camera_settings_onvif_switch_topic": "Onvif switch",
+        "camera_settings_onvif_ip_type_dynamic": "IP dinamic",
+        "camera_settings_onvif_ip_type_static": "IP static",
+        "camera_settings_onvif_ip_type_topic": "Modă nemodoasă",
+        "camera_settings_onvif_set_password_tips": "Parola dispozitivului acceptă 8-32 de caractere și trebuie să conțină litere majuscule și minuscule, precum și cifre.",
+        "camera_settings_onvif_switch_topic": "Comutator Onvif",
         "camera_settings_onvif_topic": "Onvif",
-        "camera_settings_power_management_settings_topic": "Power Management Settings",
+        "camera_settings_power_management_settings_topic": "Setări de gestionare a energiei",
         "camera_settings_recording_mode_firstbox_topic1": "Declanșat de mișcare",
         "camera_settings_recording_mode_firstbox_topic1_description": "Va înregistra doar dacă este detectată o mișcare",
         "camera_settings_recording_mode_firstbox_topic2": "Continuă",
@@ -24800,11 +24800,11 @@ export default {
         "camera_settings_talk_mode_secondtopic": "Comunicarea poate fi influențată de nivelul de zgomot. În funcție de situație, vă recomandăm să alegeți dintre comunicarea unidirecțională sau bidirecțională.",
         "camera_settings_talk_mode_topic": "Modul de vorbire",
         "camera_site": "Site",
-        "camera_site_delete_dialog_title": "Do you really want to delete the site?",
-        "camera_site_name": "Site name",
-        "camera_site_overview_empty_button_add_text": "Add site",
-        "camera_site_overview_empty_information_text": "You have not added a site yet",
-        "camera_site_overview_warning_max_number_text": "Maximum number of sites has been reached",
+        "camera_site_delete_dialog_title": "Chiar vrei să ștergi site-ul?",
+        "camera_site_name": "Numele site-ului",
+        "camera_site_overview_empty_button_add_text": "Adăugați site-ul",
+        "camera_site_overview_empty_information_text": "Nu ați adăugat încă un site",
+        "camera_site_overview_warning_max_number_text": "A fost atins numărul maxim de site-uri",
         "camera_status_indicator": "Indicator de stare",
         "camera_tile_camera_button_label_photo": "Faceți o fotografie",
         "camera_tile_camera_button_label_video": "Înregistrați un videoclip",
@@ -25066,30 +25066,30 @@ export default {
         "country_scotland": "Scoţia",
         "country_selection_textfield_headline_search": "Căutare",
         "country_sy": "Siria",
-        "curation_calibration_callibrate_btn_text": "Calibrate",
-        "curation_calibration_nextbtn_text": "Next step",
+        "curation_calibration_callibrate_btn_text": "Calibra",
+        "curation_calibration_nextbtn_text": "Urmatorul pas",
         "current_temp_humidity": "Temperatura și umiditatea actuală a solului",
-        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
-        "curtain_calibration_progress_text": "Calibration in progress.....",
-        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_failed_text": "Procesul de calibrare al cortinei inteligente a eșuat.",
+        "curtain_calibration_progress_text": "Calibrare în curs.....",
+        "curtain_calibration_success_text": "Procesul de calibrare a cortinei inteligente a avut succes.",
         "curtain_calibration_tryagin_text": "Încearcă din nou",
-        "curtain_control_headline_text": "Curtain",
-        "curtain_control_title": "Curtain control",
-        "curtain_fast_calibration": "Fast calibration",
-        "curtain_fast_calibration_step1": "1. Take a stop watch.\n\n2. Close the curtains fully.\n\n3. Open the curtains fully and measure the time with stop watch from fully close to fully open.\n\n4. Click on \"Next Step\" and enter rounded up integer of seconds you measured with stop watch.",
-        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain from fully closed to fully open.",
-        "curtain_fast_toast_text": "Fast calibration is just allowed when the curtain is fully closed at 0%.",
-        "curtain_intelligent_calibration": "Intelligent calibration",
-        "curtain_intelligent_calibration_step1": "Please note for intelligent calibration, you need a wall switch to fully open/close the curtain. If you are not using a wall switch, please use the fast calibration mode.\n\n1. Install the curtain motor correctly before calibration so that the curtain can be fully opened/closed.\n\n2. Click “Next Step”.",
-        "curtain_intelligent_calibration_step2": "1. Press the wall switch to open the curtain until it is fully open.\n\n2. Press the wall switch to close the curtain until it is fully closed.\n\n3. Once the steps in 1 and 2 are done, then click “Calibrate\".",
-        "curtain_motor_steering": "Motor steering",
-        "curtain_motor_steering1": "Forward direction",
-        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
-        "curtain_motor_steering2": "Backward direction",
-        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
-        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
-        "curtain_summary_action_txt_1": "Open",
-        "curtain_summary_action_txt_2": "Close",
+        "curtain_control_headline_text": "Perdea",
+        "curtain_control_title": "Controlul cortinei",
+        "curtain_fast_calibration": "Calibrare rapidă",
+        "curtain_fast_calibration_step1": "1. Luați un cronometru. 2. Trageți complet perdelele. 3. Deschideți complet perdelele și măsurați timpul cu cronometrul de la complet închis la complet deschis. 4. Faceți clic pe „Pasul următor” și introduceți numărul întreg rotunjit al secundelor măsurate cu cronometrul.",
+        "curtain_fast_calibration_step2": "Introduceți timpul necesar cortinei de la închidere completă la deschidere completă.",
+        "curtain_fast_toast_text": "Calibrarea rapidă este permisă doar atunci când cortina este complet închisă la 0%.",
+        "curtain_intelligent_calibration": "Calibrare inteligentă",
+        "curtain_intelligent_calibration_step1": "Rețineți că pentru calibrarea inteligentă, aveți nevoie de un întrerupător de perete pentru a deschide/închide complet perdeaua. Dacă nu utilizați un întrerupător de perete, vă rugăm să utilizați modul de calibrare rapidă. 1. Instalați corect motorul perdelei înainte de calibrare, astfel încât perdeaua să poată fi deschisă/închisă complet. 2. Faceți clic pe „Pasul următor”.",
+        "curtain_intelligent_calibration_step2": "1. Apăsați întrerupătorul de perete pentru a deschide perdeaua până când aceasta este complet deschisă. 2. Apăsați întrerupătorul de perete pentru a închide perdeaua până când aceasta este complet închisă. 3. După ce ați terminat pașii de la punctele 1 și 2, faceți clic pe „Calibrare”.",
+        "curtain_motor_steering": "Direcție motorizată",
+        "curtain_motor_steering1": "Direcție înainte",
+        "curtain_motor_steering1_description": "Motorul cortinei funcționează în direcția înainte",
+        "curtain_motor_steering2": "Direcție înapoi",
+        "curtain_motor_steering2_description": "Motorul perdelei funcționează în direcția inversă",
+        "curtain_motor_steering_tip": "Pentru a configura direcția de acționare a motorului cortinei",
+        "curtain_summary_action_txt_1": "Deschis",
+        "curtain_summary_action_txt_2": "Închide",
         "daily": "Zilnic",
         "date": "Data",
         "date_type": "Tipul datei",
@@ -25232,13 +25232,13 @@ export default {
         "history_socket_headline_text": "Istoric",
         "home_screen_home_dialog_yes_con": "Am înțeles",
         "humidity": "Umiditate",
-        "hybrid_headline_text": "Hybrid switch",
-        "hybrid_switchstate_setting1": "Setting 1",
-        "hybrid_switchstate_setting2": "Setting 2",
-        "hybrid_switchstate_setting3": "Setting 3",
-        "hybrid_switchstate_setting3_description": "Switch button",
-        "hybrid_switchstate_setting_text": "Switch state setting",
-        "hybrid_switchstate_title": "Switch state",
+        "hybrid_headline_text": "Comutator hibrid",
+        "hybrid_switchstate_setting1": "Setarea 1",
+        "hybrid_switchstate_setting2": "Setarea 2",
+        "hybrid_switchstate_setting3": "Setarea 3",
+        "hybrid_switchstate_setting3_description": "Buton de comutare",
+        "hybrid_switchstate_setting_text": "Setarea stării comutatorului",
+        "hybrid_switchstate_title": "Starea comutatorului",
         "infobutton_totalenergy": "Energia totală arată numai datele privind consumul total/generarea după ultima resetare.\nDatele au fost comutate în următoarele zile:",
         "intermittent_time": "Timp intermitent",
         "irrigation": "Irigare",
@@ -25382,16 +25382,16 @@ export default {
         "motion_detection_add_time_schedule_headline_text": "Adăugați un nou program",
         "motion_detection_add_time_schedule_selectionfield_text": "Nume",
         "motion_detection_add_time_schedule_system_back_text": "Program",
-        "motion_detection_alarm_interval": "Alarm Interval",
+        "motion_detection_alarm_interval": "Interval de alarmă",
         "motion_detection_cloud_camera_settings_text": "Domeniul de activitate",
         "motion_detection_cloud_camera_settings_text2": "Schimbarea domeniului de activitate",
         "motion_detection_description_text": "Opțiuni de selectat atunci când este detectată o mișcare.",
-        "motion_detection_detect_baby_crying": "Baby cry detection",
+        "motion_detection_detect_baby_crying": "Detectarea plânsului bebelușului",
         "motion_detection_headline_text": "Detectie miscare",
         "motion_detection_no_safe_mode_text": "Declanșează iluminarea",
         "motion_detection_no_safe_mode_trigger_text": "Declanșarea notificărilor",
-        "motion_detection_pir": "Motion detection level",
-        "motion_detection_select_detection_sensitivity_level": "Detection sensitivity level",
+        "motion_detection_pir": "Nivel de detectare a mișcării",
+        "motion_detection_select_detection_sensitivity_level": "Nivelul de sensibilitate al detectării",
         "motion_detection_selectionfield2_topic_text": "Valoare Lux-ului",
         "motion_detection_selectionfield2_value2_text": "300 (amurg)",
         "motion_detection_selectionfield2_value3_text": "50 (seara)",
@@ -25399,7 +25399,7 @@ export default {
         "motion_detection_selectionfield2_value5_text": "5 (întuneric)",
         "motion_detection_selectionfield2_value_text": "2000 (zi)",
         "motion_detection_selectionfield_topic_text": "Sensibilitatea de declanșare",
-        "motion_detection_sound_detection": "Sound detection",
+        "motion_detection_sound_detection": "Detectarea sunetului",
         "motion_detection_standby_light_brightness_text": "Luminozitatea luminii de așteptare",
         "motion_detection_standby_light_text1": "Lumină de așteptare",
         "motion_detection_standby_light_text2": "Oprire după un timp",
@@ -25410,7 +25410,7 @@ export default {
         "motion_detection_time_schedule_notifications_field_weekdays_text4": "În fiecare zi",
         "motion_detection_time_schedule_notifications_warning_text": "A fost atins numărul maxim de programe orare.",
         "motion_detection_trigger_text": "Declanșează iluminarea",
-        "motion_detection_video_recording_duration": "Video recording duration",
+        "motion_detection_video_recording_duration": "Durata înregistrării video",
         "motion_detection_with_safe_mode_brightness_text": "Luminozitatea iluminării",
         "motion_detection_with_safe_mode_safetymode_sensing_text": "Distanța de detectare",
         "motion_detection_with_safe_mode_safetymode_value4_text": "Personalizat",
@@ -25433,11 +25433,11 @@ export default {
         "plug_energyconsumptionswitch": "Comutați în modul de consum de energie",
         "plug_energygenerationswitch": "Treceți la modul de generare a energiei",
         "pos_mode_switching_fail_tips": "Parolă incorectă. Vă rugăm să verificați și să introduceți parola corectă.",
-        "power_management_battery_remaining": "Remaining battery level",
-        "power_management_low_battery_alarm_threshold": "Set the level the battery should have for the alarm to start",
-        "power_management_power_source": "Power source",
+        "power_management_battery_remaining": "Nivelul rămas al bateriei",
+        "power_management_low_battery_alarm_threshold": "Setați nivelul bateriei pe care trebuie să îl aibă pentru ca alarma să pornească",
+        "power_management_power_source": "Sursă de alimentare",
         "power_management_power_source_battery": "Baterie",
-        "power_management_power_source_power_cable": "Power cable",
+        "power_management_power_source_power_cable": "Cablu de alimentare",
         "power_off_memory_customized_description": "Selectarea definită de utilizator a valorii culorii și luminozității.",
         "power_off_memory_default_state_description": "Reveniți la valoarea implicită a culorii și luminozității.",
         "power_off_memory_default_state_title": "Starea implicită",
@@ -25449,10 +25449,10 @@ export default {
         "power_strip_feature_2_socket_2_text_min_on": "Priza 2 activată în {0} min",
         "power_strip_feature_2_socket_3_text_min_off": "Priza 3 oprită în {0} min",
         "power_strip_feature_2_socket_3_text_min_on": "Priza 3 activată în {0} min",
-        "power_strip_feature_2_socket_4_text_min_off": "Socket 4 will be switched off in {0} ",
-        "power_strip_feature_2_socket_4_text_min_on": "Socket 4 will be switched on in {0}",
-        "power_strip_feature_2_socket_5_text_min_off": "Socket 5 will be switched off in {0}",
-        "power_strip_feature_2_socket_5_text_min_on": "Socket 5 will be switched on in {0}",
+        "power_strip_feature_2_socket_4_text_min_off": "Soclul 4 va fi oprit în {0} ",
+        "power_strip_feature_2_socket_4_text_min_on": "Soclul 4 va fi pornit în {0}",
+        "power_strip_feature_2_socket_5_text_min_off": "Soclul 5 va fi oprit în {0}",
+        "power_strip_feature_2_socket_5_text_min_on": "Soclul 5 va fi pornit în {0}",
         "power_strip_feature_2_socket_usb_text_min_off": "Priza USB oprită în {0} min",
         "power_strip_feature_2_socket_usb_text_min_on": "Priza USB pornită în {0} min",
         "power_strip_specific_settings_desc_socket_1": "Priza 1 Descriere",
@@ -25462,8 +25462,8 @@ export default {
         "power_strip_tile_socket_1_headline": "Priza 1",
         "power_strip_tile_socket_2_headline": "Priza 2",
         "power_strip_tile_socket_3_headline": "Priza 3",
-        "power_strip_tile_socket_4_headline": "Socket 4",
-        "power_strip_tile_socket_5_headline": "Socket 5",
+        "power_strip_tile_socket_4_headline": "Soclu 4",
+        "power_strip_tile_socket_5_headline": "Soclu 5",
         "power_strip_tile_socket_usb_headline": "Priză USB",
         "privatemode_description": "Pentru a închide canalele de transmisie audio și video pentru cameră pentru a proteja confidențialitatea utilizatorilor atunci când sunt acasă.",
         "push_notifications_contact_sensor_door_closing_title": "Memento de închidere",
@@ -25508,16 +25508,16 @@ export default {
         "smoke_alerteffect": "Fum detectat",
         "smoke_alertfree": "Nu se detectează fum",
         "smoke_equipmentselftest": "Autotestarea echipamentului",
-        "socket1_active_timer_field_small_off_text": "Socket 1 off in {0}",
-        "socket1_active_timer_field_small_on_text": "Socket 1 on in {0}",
-        "socket2_active_timer_field_small_off_text": "Socket 2 off in {0}",
-        "socket2_active_timer_field_small_on_text": "Socket 2 on in {0}",
-        "socket3_active_timer_field_small_off_text": "Socket 3 off in {0}",
-        "socket3_active_timer_field_small_on_text": "Socket 3 on in {0}",
-        "socket4_active_timer_field_small_off_text": "Socket 4 off in {0}",
-        "socket4_active_timer_field_small_on_text": "Socket 4 on in {0}",
-        "socket5_active_timer_field_small_off_text": "Socket 5 off in {0}",
-        "socket5_active_timer_field_small_on_text": "Socket 5 on in {0}",
+        "socket1_active_timer_field_small_off_text": "Soclu 1 oprit în {0}",
+        "socket1_active_timer_field_small_on_text": "Soclu 1 pornit {0}",
+        "socket2_active_timer_field_small_off_text": "Soclu 2 oprit în {0}",
+        "socket2_active_timer_field_small_on_text": "Soclu 2 pornit {0}",
+        "socket3_active_timer_field_small_off_text": "Soclu 3 oprit în {0}",
+        "socket3_active_timer_field_small_on_text": "Soclu 3 pornit {0}",
+        "socket4_active_timer_field_small_off_text": "Soclu 4 oprit în {0}",
+        "socket4_active_timer_field_small_on_text": "Soclu 4 pornit {0}",
+        "socket5_active_timer_field_small_off_text": "Soclu 5 oprit în {0}",
+        "socket5_active_timer_field_small_on_text": "Soclu 5 pornit {0}",
         "socket_settings_firstbox_status1_description": "Dispozitivul rămâne oprit",
         "socket_settings_firstbox_status2_description": "Dispozitivul rămâne pornit",
         "socket_settings_firstbox_status3_description": "Reveniți la starea anterioară înainte ca alimentarea să fie oprită",
@@ -25534,8 +25534,8 @@ export default {
         "sockets_specific_settings_relay_status": "Putere asupra comportamentului",
         "sockets_specific_settings_relay_status_remember": "Amintiți-vă ultimul statut",
         "sockets_specific_settings_switch_inching": "Oprire automată ",
-        "socketusb_active_timer_field_small_off_text": "USB off in {0}",
-        "socketusb_active_timer_field_small_on_text": "USB on in {0}",
+        "socketusb_active_timer_field_small_off_text": "USB oprit în {0}",
+        "socketusb_active_timer_field_small_on_text": "Intrare USB {0}",
         "software_update_found_failed_update_error_5012": "Dispozitivul este offline.",
         "solar_bt_pp_battery_headline": "Baterie",
         "solar_bt_pp_field_dm": "Dispoziție dinamică",
@@ -25627,52 +25627,52 @@ export default {
         "striplight_adaptbutton": "Adaptare",
         "striplight_lengthadaptationtext": "Dacă lumina benzii a fost tăiată, atunci puteți ajusta lungimea în aplicație pentru a o adapta.",
         "striplight_lengthtitle": "Lungimea luminii benzii",
-        "switch1_active_timer_field_small_off_text": "Switch 1 off at {0}",
-        "switch1_active_timer_field_small_on_text": "Switch 1 on at {0}",
-        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
-        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
-        "switch_4channelfunctions1": "Switch 1",
-        "switch_4channelfunctions2": "Switch 2",
-        "switch_4channelfunctions3": "Switch 3",
-        "switch_4channelfunctions4": "Switch 4",
-        "switch_4channels1setting": "Switch 1 setting",
-        "switch_4channels2setting": "Switch 2 setting",
-        "switch_4channels3setting": "Switch 3 setting",
-        "switch_4channels4setting": "Switch 4 setting",
-        "switch_active_timer_field_small_off_text": "Switch off in {0}",
-        "switch_active_timer_field_small_on_text": "Switch on in {0}",
-        "switch_doublepress": "Double press",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "Allows only one switch to be turned on at a time",
-        "switch_longpress": "Long press",
+        "switch1_active_timer_field_small_off_text": "Opriți 1 la {0}",
+        "switch1_active_timer_field_small_on_text": "Porniți 1 la {0}",
+        "switch2_active_timer_field_small_off_text": "Opriți 2 în {0}",
+        "switch2_active_timer_field_small_on_text": "Porniți 2 în {0}",
+        "switch_4channelfunctions1": "Comutatorul 1",
+        "switch_4channelfunctions2": "Comutatorul 2",
+        "switch_4channelfunctions3": "Comutatorul 3",
+        "switch_4channelfunctions4": "Comutatorul 4",
+        "switch_4channels1setting": "Setarea comutatorului 1",
+        "switch_4channels2setting": "Setarea comutatorului 2",
+        "switch_4channels3setting": "Setarea comutatorului 3",
+        "switch_4channels4setting": "Setarea comutatorului 4",
+        "switch_active_timer_field_small_off_text": "Oprire în {0}",
+        "switch_active_timer_field_small_on_text": "Porniți în {0}",
+        "switch_doublepress": "Apăsare dublă",
+        "switch_interlock": "Interblocare",
+        "switch_interlock_addbtn_text": "Adăugați interblocare",
+        "switch_interlock_addtitle": "Adăugați o nouă interblocare",
+        "switch_interlock_delete_popup_topic": "Chiar vrei să ștergi blocarea?",
+        "switch_interlock_editbtn_text": "Ștergeți interblocarea",
+        "switch_interlock_edittitle": "Editați interblocarea",
+        "switch_interlockingdescription": "Permite activarea unui singur comutator odată",
+        "switch_longpress": "Apăsare lungă",
         "switch_overcharge_headline_description": "Funcția oprește automat încărcarea dispozitivelor mobile, inclusiv a telefoanelor mobile și a băncilor de alimentare, atunci când acestea sunt complet încărcate, pentru a preveni supraîncărcarea și a prelungi durata de viață a bateriei.",
         "switch_overcharge_headline_text": "Protecție la supraîncărcare",
-        "switch_singlepress": "Single press",
+        "switch_singlepress": "Apăsare unică",
         "switchdescription_energy": "Rețineți că datele totale de energie vor fi resetate și nu pot fi recuperate din nou.",
         "switchinching_overview_description_text": "Pentru a opri automat dispozitivul după o perioadă de timp.",
-        "switchmodule_switch1description": "Switch 1 description",
-        "switchmodule_switch1title": "Switch 1",
-        "switchmodule_switch2description": "Switch 2 description",
-        "switchmodule_switch2title": "Switch 2",
-        "switchmodule_switchdescription": "Switch description",
+        "switchmodule_switch1description": "Descrierea comutatorului 1",
+        "switchmodule_switch1title": "Comutatorul 1",
+        "switchmodule_switch2description": "Descrierea comutatorului 2",
+        "switchmodule_switch2title": "Comutatorul 2",
+        "switchmodule_switchdescription": "Descrierea comutatorului",
         "switchmodule_switchtitle": "Comutare",
-        "switchmodule_typesetting": "Switch state",
-        "switchmodule_typesetting1": "Each toggle of the wall switch triggers a change in the device's state.",
-        "switchmodule_typesetting2": "Wall switch positions correspond to fixed ON and OFF states. Turning the switch ON sets the device to ON; if it's already ON, the command is ignored and the state remains unchanged.",
-        "switchmodule_typesetting3": "If your wall switch only stays in the ON position while being pressed and automatically returns to OFF when released, it behaves like a momentary (impulse) switch.",
-        "switchmodule_typesettingdescription": "To configure the switch state setting",
-        "switchname_1channel": "Smart switch 1 channel",
-        "switchname_2channel": "Smart switch 2 channel",
-        "switchname_4channel": "Smart switch 4 channel",
+        "switchmodule_typesetting": "Starea comutatorului",
+        "switchmodule_typesetting1": "Fiecare comutare a întrerupătorului de perete declanșează o schimbare a stării dispozitivului.",
+        "switchmodule_typesetting2": "Pozițiile comutatorului de perete corespund stărilor fixe PORNIT și OPRIT. Pornirea comutatorului setează dispozitivul la ON; dacă este deja PORNIT, comanda este ignorată și starea rămâne neschimbată.",
+        "switchmodule_typesetting3": "Dacă întrerupătorul de perete rămâne în poziția ON doar cât timp este apăsat și revine automat în poziția OFF când este eliberat, se comportă ca un întrerupător momentan (cu impuls).",
+        "switchmodule_typesettingdescription": "Pentru a configura setarea stării comutatorului",
+        "switchname_1channel": "Comutator inteligent cu 1 canal",
+        "switchname_2channel": "Comutator inteligent cu 2 canale",
+        "switchname_4channel": "Comutator inteligent cu 4 canale",
         "switchonlyonce": "Comutarea modului este permisă numai o dată pe zi.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Comutator basculant",
+        "switchstate2selection": "Comutator basculant sincronizat",
+        "switchstate3selection": "Buton de apăsare",
         "switchtitle_energyconsumption": "Chiar vrei să treci la consumul de energie?",
         "switchtitle_energygeneration": "Chiar vrei să treci la generarea de energie?",
         "temperature": "Temperatură",
@@ -25721,7 +25721,7 @@ export default {
         "thermostat_vacationplan": "Plan de vacanță",
         "thermostat_warm": "Confort",
         "third_irrigation": "A treia irigare",
-        "time_format": "Time format",
+        "time_format": "Format de timp",
         "time_unit_h": "h",
         "timer_ceiling_fan_headline_text": "Cronometru",
         "timer_ceiling_fan_lighting_switched_off_text": "Iluminatul va fi oprit la aproximativ {0}",
@@ -25736,12 +25736,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Priza 1 va fi oprită la aproximativ {0}",
         "timer_powerstrip_socket1_switched_on_text": "Priza1 va fi pornită la aproximativ {0}",
         "timer_sockets_button_text": "Pornire",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Comutatorul 1 va fi oprit la aproximativ {0}",
+        "timer_switch1_active_timer_field_description_on_text": "Comutatorul 1 va fi pornit la aproximativ {0}",
+        "timer_switch2_active_timer_field_description_off_text": "Comutatorul 2 va fi oprit la aproximativ {0}",
+        "timer_switch2_active_timer_field_description_on_text": "Comutatorul 2 va fi pornit la aproximativ {0}",
+        "timer_switch_active_timer_field_description_off_text": "Comutatorul va fi oprit la aproximativ {0}",
+        "timer_switch_active_timer_field_description_on_text": "Comutatorul va fi pornit la aproximativ {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Iluminat secundar",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Iluminat principal",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Iluminat",
@@ -25895,10 +25895,10 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Отмена",
         "btsolar_groups_inductionsync": "Синхронизация обнаружения движения",
         "btsolar_groups_inductionsync_description": "Синхронизировать датчик движения всех ламп, чтобы при обнаружении движения одной из ламп включились и остальные.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
-        "camera_edit_site_name": "Edit Site name",
-        "camera_errmsg_site_point_limit": "Failed to enable site patrol because less than 2 sites were added.",
+        "camera_calibration": "Калибровка камеры",
+        "camera_calibration_desc": "Калибровка камеры занимает около 25 секунд. Хотите продолжить?",
+        "camera_edit_site_name": "Изменить название сайта",
+        "camera_errmsg_site_point_limit": "Не удалось включить патрулирование сайтов, так как было добавлено менее 2 сайтов.",
         "camera_feature_1_headline": "Сирена",
         "camera_feature_2_headline": "Микрофон",
         "camera_feature_5_headline": "Записи",
@@ -25907,34 +25907,34 @@ export default {
         "camera_local_recording": "Локальная запись",
         "camera_mic_two_way_talking": "Вызов.....",
         "camera_net_err": "Соединение устройства прервано, проверьте устройство и его сеть",
-        "camera_operation_site_error": "Not editable in site patrol mode",
-        "camera_patrol": "Patrolling",
-        "camera_patrol_cruise_time": "Cruise time：{0} - {1}",
-        "camera_patrol_enable": "Enable patrolling",
-        "camera_preset_point": "Preset Point",
+        "camera_operation_site_error": "Невозможно редактировать в режиме патрулирования сайта.",
+        "camera_patrol": "Патрулирование",
+        "camera_patrol_cruise_time": "Время круиза:{0} - {1}",
+        "camera_patrol_enable": "Включить патрулирование",
+        "camera_preset_point": "Предустановленная точка",
         "camera_private_mode_sleep": "Устройство в спящем режиме",
         "camera_private_mode_sleep_close": "Включите камеру",
         "camera_re_connect_stream": "Повторное подключение, пожалуйста, подождите",
-        "camera_restart_device_dialog_content": "Are you sure that you want to restart the device?",
-        "camera_select_patrol_mode": "Select a patrolling mode",
-        "camera_select_patrol_mode_panoramic": "Panoramic patrolling",
-        "camera_select_patrol_mode_panoramic_desc": "Camera will patrol every angle",
-        "camera_select_patrol_mode_site": "Site patrolling",
-        "camera_select_patrol_mode_site_desc": "The camera will patrol all sites and stay at each site for 10s",
-        "camera_set_patrol_time": "Select a patrolling time",
-        "camera_set_patrol_time_all_day": "All-day patrolling",
-        "camera_set_patrol_time_all_day_desc": "Patrolling will continue for 24x7 hours",
-        "camera_set_patrol_time_timed": "Timed patrolling",
-        "camera_set_patrol_time_timed_desc": "Patrolling will take effect as scheduled",
-        "camera_settings_anti_dismantle_topic": "Anti dismantle alarm",
-        "camera_settings_anti_flicker_50hz": "50 Hz",
-        "camera_settings_anti_flicker_60hz": "60 Hz",
-        "camera_settings_anti_flicker_topic": "Anti-flicker",
+        "camera_restart_device_dialog_content": "Вы уверены, что хотите перезагрузить устройство?",
+        "camera_select_patrol_mode": "Выберите режим патрулирования",
+        "camera_select_patrol_mode_panoramic": "Панорамное патрулирование",
+        "camera_select_patrol_mode_panoramic_desc": "Камера будет патрулировать каждый угол",
+        "camera_select_patrol_mode_site": "Патрулирование территории",
+        "camera_select_patrol_mode_site_desc": "Камера будет патрулировать все объекты и оставаться на каждом объекте в течение 10 секунд.",
+        "camera_set_patrol_time": "Выберите время патрулирования",
+        "camera_set_patrol_time_all_day": "Круглосуточное патрулирование",
+        "camera_set_patrol_time_all_day_desc": "Патрулирование будет продолжаться круглосуточно.",
+        "camera_set_patrol_time_timed": "Патрулирование по времени",
+        "camera_set_patrol_time_timed_desc": "Патрулирование начнется по расписанию.",
+        "camera_settings_anti_dismantle_topic": "Сигнализация против демонтажа",
+        "camera_settings_anti_flicker_50hz": "50 Гц",
+        "camera_settings_anti_flicker_60hz": "60 Гц",
+        "camera_settings_anti_flicker_topic": "Антимерцание",
         "camera_settings_button_text": "Формат",
-        "camera_settings_device_restart": "Device restart",
+        "camera_settings_device_restart": "Перезагрузка устройства",
         "camera_settings_format_sd_card_note": "Обратите внимание, что все ваши данные будут удалены без возможности восстановления.",
         "camera_settings_format_sd_card_topic": "Вы действительно хотите отформатировать SD-карту?",
-        "camera_settings_humanoid_focus_topic": "Humanoid focus",
+        "camera_settings_humanoid_focus_topic": "Гуманоидный фокус",
         "camera_settings_night_vision_description": "Эта функция позволяет снимать изображения в условиях низкой освещенности или темноты. Эта функция улучшает видеонаблюдение, безопасность и ситуационную осведомленность в различных приложениях.",
         "camera_settings_night_vision_firstbox_topic1": "Авто",
         "camera_settings_night_vision_firstbox_topic1_description": "Активирует ночное видение только при необходимости",
@@ -25948,13 +25948,13 @@ export default {
         "camera_settings_night_vision_mode_topic": "Ночной режим",
         "camera_settings_night_vision_topic": "Режим \"Ночное видение\"",
         "camera_settings_onvif_ip_topic": "IP",
-        "camera_settings_onvif_ip_type_dynamic": "Dynamic IP",
-        "camera_settings_onvif_ip_type_static": "Static IP",
-        "camera_settings_onvif_ip_type_topic": "Onvif mode",
-        "camera_settings_onvif_set_password_tips": "The device password supports 8-32 characters and must contain uppercase and lowercase letters as well as digits.",
-        "camera_settings_onvif_switch_topic": "Onvif switch",
+        "camera_settings_onvif_ip_type_dynamic": "Динамический IP-адрес",
+        "camera_settings_onvif_ip_type_static": "Статический IP-адрес",
+        "camera_settings_onvif_ip_type_topic": "Немодная мода",
+        "camera_settings_onvif_set_password_tips": "Пароль устройства поддерживает длину от 8 до 32 символов и должен содержать заглавные и строчные буквы, а также цифры.",
+        "camera_settings_onvif_switch_topic": "ONVIF-переключатель",
         "camera_settings_onvif_topic": "Onvif",
-        "camera_settings_power_management_settings_topic": "Power Management Settings",
+        "camera_settings_power_management_settings_topic": "Настройки управления питанием",
         "camera_settings_recording_mode_firstbox_topic1": "Срабатывает при движении",
         "camera_settings_recording_mode_firstbox_topic1_description": "Запись будет вестись только при обнаружении движения",
         "camera_settings_recording_mode_firstbox_topic2": "Постоянно",
@@ -25971,12 +25971,12 @@ export default {
         "camera_settings_talk_mode_firstbox_option2_topic": "Двусторонняя связь",
         "camera_settings_talk_mode_secondtopic": "На распознавание речи может влиять окружающая обстановка. В зависимости от ситуации мы рекомендуем либо одностороннюю, либо двустороннюю связь.",
         "camera_settings_talk_mode_topic": "Режим разговора",
-        "camera_site": "Site",
-        "camera_site_delete_dialog_title": "Do you really want to delete the site?",
-        "camera_site_name": "Site name",
-        "camera_site_overview_empty_button_add_text": "Add site",
-        "camera_site_overview_empty_information_text": "You have not added a site yet",
-        "camera_site_overview_warning_max_number_text": "Maximum number of sites has been reached",
+        "camera_site": "Сайт",
+        "camera_site_delete_dialog_title": "Вы действительно хотите удалить сайт?",
+        "camera_site_name": "Название сайта",
+        "camera_site_overview_empty_button_add_text": "Добавить сайт",
+        "camera_site_overview_empty_information_text": "Вы еще не добавили сайт",
+        "camera_site_overview_warning_max_number_text": "Достигнуто максимальное количество сайтов",
         "camera_status_indicator": "Индикатор состояния",
         "camera_tile_camera_button_label_photo": "Сделать фото",
         "camera_tile_camera_button_label_video": "Записать видео",
@@ -26238,30 +26238,30 @@ export default {
         "country_scotland": "Шотландия",
         "country_selection_textfield_headline_search": "Поиск",
         "country_sy": "Сирия",
-        "curation_calibration_callibrate_btn_text": "Calibrate",
-        "curation_calibration_nextbtn_text": "Next step",
+        "curation_calibration_callibrate_btn_text": "Калибровать",
+        "curation_calibration_nextbtn_text": "Следующий шаг",
         "current_temp_humidity": "Текущая температура и влажность почвы",
-        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
-        "curtain_calibration_progress_text": "Calibration in progress.....",
-        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_failed_text": "Процесс калибровки интеллектуальной шторы не удался.",
+        "curtain_calibration_progress_text": "Калибровка в процессе...",
+        "curtain_calibration_success_text": "Процесс калибровки интеллектуальной шторы прошел успешно.",
         "curtain_calibration_tryagin_text": "Повторить",
-        "curtain_control_headline_text": "Curtain",
-        "curtain_control_title": "Curtain control",
-        "curtain_fast_calibration": "Fast calibration",
-        "curtain_fast_calibration_step1": "1. Take a stop watch.\n\n2. Close the curtains fully.\n\n3. Open the curtains fully and measure the time with stop watch from fully close to fully open.\n\n4. Click on \"Next Step\" and enter rounded up integer of seconds you measured with stop watch.",
-        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain from fully closed to fully open.",
-        "curtain_fast_toast_text": "Fast calibration is just allowed when the curtain is fully closed at 0%.",
-        "curtain_intelligent_calibration": "Intelligent calibration",
-        "curtain_intelligent_calibration_step1": "Please note for intelligent calibration, you need a wall switch to fully open/close the curtain. If you are not using a wall switch, please use the fast calibration mode.\n\n1. Install the curtain motor correctly before calibration so that the curtain can be fully opened/closed.\n\n2. Click “Next Step”.",
-        "curtain_intelligent_calibration_step2": "1. Press the wall switch to open the curtain until it is fully open.\n\n2. Press the wall switch to close the curtain until it is fully closed.\n\n3. Once the steps in 1 and 2 are done, then click “Calibrate\".",
-        "curtain_motor_steering": "Motor steering",
-        "curtain_motor_steering1": "Forward direction",
-        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
-        "curtain_motor_steering2": "Backward direction",
-        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
-        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
-        "curtain_summary_action_txt_1": "Open",
-        "curtain_summary_action_txt_2": "Close",
+        "curtain_control_headline_text": "Занавес",
+        "curtain_control_title": "Управление шторами",
+        "curtain_fast_calibration": "Быстрая калибровка",
+        "curtain_fast_calibration_step1": "1. Возьмите секундомер. 2. Полностью закройте шторы. 3. Полностью откройте шторы и измерьте время с помощью секундомера от полного закрытия до полного открытия. 4. Нажмите «Следующий шаг» и введите округленное целое число секунд, измеренных вами с помощью секундомера.",
+        "curtain_fast_calibration_step2": "Введите время, необходимое шторе для полного закрытия до полного открытия.",
+        "curtain_fast_toast_text": "Быстрая калибровка допускается только тогда, когда шторка полностью закрыта на 0%.",
+        "curtain_intelligent_calibration": "Интеллектуальная калибровка",
+        "curtain_intelligent_calibration_step1": "Обратите внимание, что для интеллектуальной калибровки вам понадобится настенный выключатель, чтобы полностью открыть/закрыть штору. Если вы не используете настенный выключатель, используйте режим быстрой калибровки. 1. Установите мотор шторы правильно перед калибровкой, чтобы штору можно было полностью открыть/закрыть. 2. Нажмите «Следующий шаг».",
+        "curtain_intelligent_calibration_step2": "1. Нажмите настенный выключатель, чтобы открыть штору до полного открытия. 2. Нажмите настенный выключатель, чтобы закрыть штору до полного закрытия. 3. После выполнения шагов 1 и 2 нажмите «Калибровать».",
+        "curtain_motor_steering": "Рулевое управление двигателем",
+        "curtain_motor_steering1": "Прямое направление",
+        "curtain_motor_steering1_description": "Двигатель шторы работает в прямом направлении.",
+        "curtain_motor_steering2": "Обратное направление",
+        "curtain_motor_steering2_description": "Двигатель шторы вращается в обратном направлении.",
+        "curtain_motor_steering_tip": "Для настройки направления движения мотора шторы",
+        "curtain_summary_action_txt_1": "Открытый",
+        "curtain_summary_action_txt_2": "Закрывать",
         "daily": "Ежедневно",
         "date": "ДАТА",
         "date_type": "Тип даты",
@@ -26404,13 +26404,13 @@ export default {
         "history_socket_headline_text": "История",
         "home_screen_home_dialog_yes_con": "Понятно",
         "humidity": "влажность",
-        "hybrid_headline_text": "Hybrid switch",
-        "hybrid_switchstate_setting1": "Setting 1",
-        "hybrid_switchstate_setting2": "Setting 2",
-        "hybrid_switchstate_setting3": "Setting 3",
-        "hybrid_switchstate_setting3_description": "Switch button",
-        "hybrid_switchstate_setting_text": "Switch state setting",
-        "hybrid_switchstate_title": "Switch state",
+        "hybrid_headline_text": "Гибридный переключатель",
+        "hybrid_switchstate_setting1": "Установка 1",
+        "hybrid_switchstate_setting2": "Установка 2",
+        "hybrid_switchstate_setting3": "Настройка 3",
+        "hybrid_switchstate_setting3_description": "Кнопка переключения",
+        "hybrid_switchstate_setting_text": "Настройка состояния переключателя",
+        "hybrid_switchstate_title": "Состояние коммутатора",
         "infobutton_totalenergy": "Общая энергия показывает только общие данные о потреблении/генерации после последнего сброса.\nДанные были включены в последующие дни:",
         "intermittent_time": "Прерывистое время",
         "irrigation": "Орошение",
@@ -26554,16 +26554,16 @@ export default {
         "motion_detection_add_time_schedule_headline_text": "Добавить новое расписание",
         "motion_detection_add_time_schedule_selectionfield_text": "Имя",
         "motion_detection_add_time_schedule_system_back_text": "Расписание",
-        "motion_detection_alarm_interval": "Alarm Interval",
+        "motion_detection_alarm_interval": "Интервал сигнала тревоги",
         "motion_detection_cloud_camera_settings_text": "Сфера деятельности",
         "motion_detection_cloud_camera_settings_text2": "Изменить область использования",
         "motion_detection_description_text": "Параметры для выбора при обнаружении движения.",
-        "motion_detection_detect_baby_crying": "Baby cry detection",
+        "motion_detection_detect_baby_crying": "Детектор детского плача",
         "motion_detection_headline_text": "Датчик движения",
         "motion_detection_no_safe_mode_text": "Освещение при запуске",
         "motion_detection_no_safe_mode_trigger_text": "Активировать уведомления",
-        "motion_detection_pir": "Motion detection level",
-        "motion_detection_select_detection_sensitivity_level": "Detection sensitivity level",
+        "motion_detection_pir": "Уровень обнаружения движения",
+        "motion_detection_select_detection_sensitivity_level": "Уровень чувствительности обнаружения",
         "motion_detection_selectionfield2_topic_text": "Величина Лк",
         "motion_detection_selectionfield2_value2_text": "300 (сумерки)",
         "motion_detection_selectionfield2_value3_text": "50 (вечер)",
@@ -26571,7 +26571,7 @@ export default {
         "motion_detection_selectionfield2_value5_text": "5 (темный)",
         "motion_detection_selectionfield2_value_text": "2000 (день)",
         "motion_detection_selectionfield_topic_text": "Чувствительность запуска",
-        "motion_detection_sound_detection": "Sound detection",
+        "motion_detection_sound_detection": "Обнаружение звука",
         "motion_detection_standby_light_brightness_text": "Яркость подсветки в режиме ожидания",
         "motion_detection_standby_light_text1": "Индикатор режима ожидания",
         "motion_detection_standby_light_text2": "Выключение по истечении определенного периода времени",
@@ -26582,7 +26582,7 @@ export default {
         "motion_detection_time_schedule_notifications_field_weekdays_text4": "Каждый день",
         "motion_detection_time_schedule_notifications_warning_text": "Достигнуто максимальное количество расписаний.",
         "motion_detection_trigger_text": "Освещение при запуске",
-        "motion_detection_video_recording_duration": "Video recording duration",
+        "motion_detection_video_recording_duration": "Продолжительность видеозаписи",
         "motion_detection_with_safe_mode_brightness_text": "Яркость освещения",
         "motion_detection_with_safe_mode_safetymode_sensing_text": "Расстояние срабатывания датчика",
         "motion_detection_with_safe_mode_safetymode_value4_text": "Настраиваемый",
@@ -26605,11 +26605,11 @@ export default {
         "plug_energyconsumptionswitch": "Переключись в режим потребления энергии",
         "plug_energygenerationswitch": "Переключись в режим выработки энергии",
         "pos_mode_switching_fail_tips": "Неверный пароль. Пожалуйста, проверьте и введите правильный пароль.",
-        "power_management_battery_remaining": "Remaining battery level",
-        "power_management_low_battery_alarm_threshold": "Set the level the battery should have for the alarm to start",
-        "power_management_power_source": "Power source",
+        "power_management_battery_remaining": "Оставшийся уровень заряда батареи",
+        "power_management_low_battery_alarm_threshold": "Установите уровень заряда батареи, при котором сработает будильник.",
+        "power_management_power_source": "Источник питания",
         "power_management_power_source_battery": "Батарея",
-        "power_management_power_source_power_cable": "Power cable",
+        "power_management_power_source_power_cable": "Кабель питания",
         "power_off_memory_customized_description": "Заданный пользователем выбор значения цвета и яркости.",
         "power_off_memory_default_state_description": "Вернитесь к значению цвета и яркости по умолчанию.",
         "power_off_memory_default_state_title": "Состояние по умолчанию",
@@ -26680,16 +26680,16 @@ export default {
         "smoke_alerteffect": "Обнаружен дым",
         "smoke_alertfree": "Дым не обнаружен",
         "smoke_equipmentselftest": "Самотестирование оборудования",
-        "socket1_active_timer_field_small_off_text": "Socket 1 off in {0}",
+        "socket1_active_timer_field_small_off_text": "Разъем 1 выключен {0}",
         "socket1_active_timer_field_small_on_text": "Socket 1 on in {0}",
-        "socket2_active_timer_field_small_off_text": "Socket 2 off in {0}",
-        "socket2_active_timer_field_small_on_text": "Socket 2 on in {0}",
-        "socket3_active_timer_field_small_off_text": "Socket 3 off in {0}",
-        "socket3_active_timer_field_small_on_text": "Socket 3 on in {0}",
-        "socket4_active_timer_field_small_off_text": "Socket 4 off in {0}",
-        "socket4_active_timer_field_small_on_text": "Socket 4 on in {0}",
-        "socket5_active_timer_field_small_off_text": "Socket 5 off in {0}",
-        "socket5_active_timer_field_small_on_text": "Socket 5 on in {0}",
+        "socket2_active_timer_field_small_off_text": "Разъем 2 выключен {0}",
+        "socket2_active_timer_field_small_on_text": "Разъем 2 на входе {0}",
+        "socket3_active_timer_field_small_off_text": "Разъем 3 выключен {0}",
+        "socket3_active_timer_field_small_on_text": "Разъем с 3 входами {0}",
+        "socket4_active_timer_field_small_off_text": "Разъем 4 выключен {0}",
+        "socket4_active_timer_field_small_on_text": "Разъем с 4 входами {0}",
+        "socket5_active_timer_field_small_off_text": "Разъем 5 выключен {0}",
+        "socket5_active_timer_field_small_on_text": "Разъем 5 входов {0}",
         "socket_settings_firstbox_status1_description": "Устройство остается выключенным",
         "socket_settings_firstbox_status2_description": "Устройство остается включенным",
         "socket_settings_firstbox_status3_description": "Возврат к предыдущему состоянию до отключения питания",
@@ -26706,8 +26706,8 @@ export default {
         "sockets_specific_settings_relay_status": "Влияние силы на поведение",
         "sockets_specific_settings_relay_status_remember": "Запомнить последний статус",
         "sockets_specific_settings_switch_inching": "Автоматическое отключение ",
-        "socketusb_active_timer_field_small_off_text": "USB off in {0}",
-        "socketusb_active_timer_field_small_on_text": "USB on in {0}",
+        "socketusb_active_timer_field_small_off_text": "Вход USB выключен {0}",
+        "socketusb_active_timer_field_small_on_text": "Вход USB включен {0}",
         "software_update_found_failed_update_error_5012": "Устройство не в сети.",
         "solar_bt_pp_battery_headline": "Батарея",
         "solar_bt_pp_field_dm": "Динамичное настроение",
@@ -26799,52 +26799,52 @@ export default {
         "striplight_adaptbutton": "Адаптировать",
         "striplight_lengthadaptationtext": "Если ленточный светильник отрезан, вы можете настроить его длину в приложении, чтобы адаптировать ее.",
         "striplight_lengthtitle": "Длина полосы света",
-        "switch1_active_timer_field_small_off_text": "Switch 1 off at {0}",
-        "switch1_active_timer_field_small_on_text": "Switch 1 on at {0}",
-        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
-        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
-        "switch_4channelfunctions1": "Switch 1",
-        "switch_4channelfunctions2": "Switch 2",
-        "switch_4channelfunctions3": "Switch 3",
-        "switch_4channelfunctions4": "Switch 4",
-        "switch_4channels1setting": "Switch 1 setting",
-        "switch_4channels2setting": "Switch 2 setting",
-        "switch_4channels3setting": "Switch 3 setting",
-        "switch_4channels4setting": "Switch 4 setting",
-        "switch_active_timer_field_small_off_text": "Switch off in {0}",
-        "switch_active_timer_field_small_on_text": "Switch on in {0}",
-        "switch_doublepress": "Double press",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "Allows only one switch to be turned on at a time",
-        "switch_longpress": "Long press",
+        "switch1_active_timer_field_small_off_text": "Выключите 1 на {0}",
+        "switch1_active_timer_field_small_on_text": "Включите 1 на {0}",
+        "switch2_active_timer_field_small_off_text": "Выключите 2 в {0}",
+        "switch2_active_timer_field_small_on_text": "Включите 2 в {0}",
+        "switch_4channelfunctions1": "Переключатель 1",
+        "switch_4channelfunctions2": "Переключатель 2",
+        "switch_4channelfunctions3": "Переключатель 3",
+        "switch_4channelfunctions4": "Переключатель 4",
+        "switch_4channels1setting": "Настройка переключателя 1",
+        "switch_4channels2setting": "Настройка переключателя 2",
+        "switch_4channels3setting": "Настройка переключателя 3",
+        "switch_4channels4setting": "Настройка переключателя 4",
+        "switch_active_timer_field_small_off_text": "Выключите в {0}",
+        "switch_active_timer_field_small_on_text": "Включите в {0}",
+        "switch_doublepress": "Двойное нажатие",
+        "switch_interlock": "Блокировка",
+        "switch_interlock_addbtn_text": "Добавить блокировку",
+        "switch_interlock_addtitle": "Добавить новую блокировку",
+        "switch_interlock_delete_popup_topic": "Вы действительно хотите удалить блокировку?",
+        "switch_interlock_editbtn_text": "Удалить блокировку",
+        "switch_interlock_edittitle": "Отредактируйте блокировку",
+        "switch_interlockingdescription": "Позволяет одновременно включать только один переключатель",
+        "switch_longpress": "Длительное нажатие",
         "switch_overcharge_headline_description": "Эта функция автоматически отключает зарядку мобильных устройств, включая мобильные телефоны и блоки питания, после их полной зарядки, чтобы предотвратить перезарядку и продлить срок службы батареи.",
         "switch_overcharge_headline_text": "Защита от перезарядки",
-        "switch_singlepress": "Single press",
+        "switch_singlepress": "Одиночное нажатие",
         "switchdescription_energy": "Обрати внимание, что данные о суммарной энергии будут сброшены и не смогут быть восстановлены снова.",
         "switchinching_overview_description_text": "Для автоматического выключения устройства через некоторое время.",
-        "switchmodule_switch1description": "Switch 1 description",
-        "switchmodule_switch1title": "Switch 1",
-        "switchmodule_switch2description": "Switch 2 description",
-        "switchmodule_switch2title": "Switch 2",
-        "switchmodule_switchdescription": "Switch description",
+        "switchmodule_switch1description": "Описание коммутатора 1",
+        "switchmodule_switch1title": "Переключатель 1",
+        "switchmodule_switch2description": "Описание коммутатора 2",
+        "switchmodule_switch2title": "Переключатель 2",
+        "switchmodule_switchdescription": "Описание коммутатора",
         "switchmodule_switchtitle": "Переключить",
-        "switchmodule_typesetting": "Switch state",
-        "switchmodule_typesetting1": "Each toggle of the wall switch triggers a change in the device's state.",
-        "switchmodule_typesetting2": "Wall switch positions correspond to fixed ON and OFF states. Turning the switch ON sets the device to ON; if it's already ON, the command is ignored and the state remains unchanged.",
-        "switchmodule_typesetting3": "If your wall switch only stays in the ON position while being pressed and automatically returns to OFF when released, it behaves like a momentary (impulse) switch.",
-        "switchmodule_typesettingdescription": "To configure the switch state setting",
-        "switchname_1channel": "Smart switch 1 channel",
-        "switchname_2channel": "Smart switch 2 channel",
-        "switchname_4channel": "Smart switch 4 channel",
+        "switchmodule_typesetting": "Состояние коммутатора",
+        "switchmodule_typesetting1": "Каждый переключатель настенного выключателя вызывает изменение состояния устройства.",
+        "switchmodule_typesetting2": "Положения настенных выключателей соответствуют фиксированным состояниям включения и выключения. При включении переключателя устройство переходит в положение ON; если оно уже включено, команда игнорируется, а состояние остается неизменным.",
+        "switchmodule_typesetting3": "Если настенный выключатель остается в положении ON только при нажатии и автоматически возвращается в положение OFF при отпускании, он работает как мгновенный (импульсный) переключатель.",
+        "switchmodule_typesettingdescription": "Чтобы настроить параметр состояния коммутатора",
+        "switchname_1channel": "Умный коммутатор 1 канал",
+        "switchname_2channel": "Интеллектуальный коммутатор 2 канала",
+        "switchname_4channel": "Интеллектуальный коммутатор 4 канала",
         "switchonlyonce": "Переключать режим разрешается только один раз в день.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Кулисный переключатель",
+        "switchstate2selection": "Синхронизированный кулисный переключатель",
+        "switchstate3selection": "Нажимаем кнопку",
         "switchtitle_energyconsumption": "Ты действительно хочешь перейти на энергопотребление?",
         "switchtitle_energygeneration": "Ты действительно хочешь перейти на выработку энергии?",
         "temperature": "температура",
@@ -26893,7 +26893,7 @@ export default {
         "thermostat_vacationplan": "План отпуска",
         "thermostat_warm": "Комфорт",
         "third_irrigation": "Третье орошение",
-        "time_format": "Time format",
+        "time_format": "Формат времени",
         "time_unit_h": "h",
         "timer_ceiling_fan_headline_text": "Таймер",
         "timer_ceiling_fan_lighting_switched_off_text": "Освещение будет выключено примерно через {0}",
@@ -26908,12 +26908,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Разъем1 будет выключен примерно через {0}",
         "timer_powerstrip_socket1_switched_on_text": "Разъем1 будет включен примерно через {0}",
         "timer_sockets_button_text": "Начать",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Коммутатор 1 будет выключен примерно через {0}",
+        "timer_switch1_active_timer_field_description_on_text": "Коммутатор 1 будет включен примерно через некоторое время {0}",
+        "timer_switch2_active_timer_field_description_off_text": "Коммутатор 2 будет выключен примерно через некоторое время {0}",
+        "timer_switch2_active_timer_field_description_on_text": "Коммутатор 2 будет включен примерно через некоторое время {0}",
+        "timer_switch_active_timer_field_description_off_text": "Выключатель будет выключен примерно через {0}",
+        "timer_switch_active_timer_field_description_on_text": "Переключатель будет включен примерно через {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Вторичное освещение",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Основное освещение",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Освещение",
@@ -27067,8 +27067,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Zrušiť",
         "btsolar_groups_inductionsync": "Synchronizácia detekcie pohybu",
         "btsolar_groups_inductionsync_description": "Synchronizácia snímača pohybu všetkých svietidiel tak, aby sa v prípade, že jedno z nich zaznamená pohyb, zapli aj ostatné.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Kalibrácia fotoaparátu",
+        "camera_calibration_desc": "Kalibrácia fotoaparátu trvá približne 25 sekúnd. Chcete pokračovať?",
         "camera_edit_site_name": "Upraviť názov lokality",
         "camera_errmsg_site_point_limit": "Nepodarilo sa povoliť obchôdzku lokalít, pretože boli pridané menej ako 2 lokality.",
         "camera_feature_1_headline": "Siréna",
@@ -27079,7 +27079,7 @@ export default {
         "camera_local_recording": "Miestne nahrávanie",
         "camera_mic_two_way_talking": "Volanie...",
         "camera_net_err": "Pripojenie zariadenia je prerušené, skontrolujte zariadenie a jeho sieť",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "Nie je možné upravovať v režime hliadkovania lokality",
         "camera_patrol": "Hliadkovanie",
         "camera_patrol_cruise_time": "Čas plavby:{0} - {1}",
         "camera_patrol_enable": "Povoliť hliadkovanie",
@@ -28014,9 +28014,9 @@ export default {
         "switchname_2channel": "Inteligentný prepínač 2 kanálov",
         "switchname_4channel": "Inteligentný prepínač 4 kanál",
         "switchonlyonce": "Prepínanie režimu je povolené len raz denne.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Kolískový spínač",
+        "switchstate2selection": "Synchronizovaný kolískový spínač",
+        "switchstate3selection": "Stlačte tlačidlo",
         "switchtitle_energyconsumption": "Naozaj chcete prejsť na spotrebu energie?",
         "switchtitle_energygeneration": "Naozaj chcete prejsť na výrobu energie?",
         "temperature": "Teplota",
@@ -28239,8 +28239,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Avbryt",
         "btsolar_groups_inductionsync": "Synkronisering av rörelsedetektering",
         "btsolar_groups_inductionsync_description": "För att synkronisera rörelsesensorn för alla lampor så att om en av dem upptäcker en rörelse så tänds också de andra.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Kamerakalibrering",
+        "camera_calibration_desc": "Kamerakalibrering tar cirka 25 sekunder. Vill du fortsätta?",
         "camera_edit_site_name": "Redigera platsens namn",
         "camera_errmsg_site_point_limit": "Det gick inte att aktivera platsövervakning eftersom färre än två platser har lagts till.",
         "camera_feature_1_headline": "Siren",
@@ -28251,7 +28251,7 @@ export default {
         "camera_local_recording": "Lokal inspelning",
         "camera_mic_two_way_talking": "Ringer...",
         "camera_net_err": "Anslutningen avbröts, kontrollera enheten och nätverket",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "Ej redigerbar i läget för platsövervakning",
         "camera_patrol": "Övervakning",
         "camera_patrol_cruise_time": "Körtid：{0} - {1}",
         "camera_patrol_enable": "Aktivera övervakning",
@@ -28592,12 +28592,12 @@ export default {
         "curtain_control_headline_text": "Gardin",
         "curtain_control_title": "Gardinkontroll",
         "curtain_fast_calibration": "Snabbkalibrering",
-        "curtain_fast_calibration_step1": "1. Dra för gardinerna helt. 2. Klicka på “Nästa steg” för att starta kalibreringen.",
-        "curtain_fast_calibration_step2": "Ange den tid som gardinen behöver för full stängning.",
-        "curtain_fast_toast_text": "Snabbkalibrering är inte tillåten när gardinutrustningen är vid 0 % öppningsnivå.",
+        "curtain_fast_calibration_step1": "1. Dra för gardinerna helt. 2. Klicka på “Nästa steg” för att starta kalibreringen. 3. Öppna  gardinerna helt och hållet och mät tiden med stoppuret från helt fördragna till helt öppna. 4. Klicka på \"Nästa steg\" och ange det avrundade heltalet sekunder som du uppmätte.",
+        "curtain_fast_calibration_step2": "Vänligen ange den tid det tar för gardinen att gå från helt stängd till helt öppen.",
+        "curtain_fast_toast_text": "Snabb kalibrering är bara tillåten när gardinen är helt stängd vid 0%.",
         "curtain_intelligent_calibration": "Intelligent kalibrering",
-        "curtain_intelligent_calibration_step1": "1. Montera gardinen korrekt före kalibrering så att den kan öppnas/stängas helt.\n\n2. Flytta gardinen så att den är helt öppen/stängd och tryck på paus.\n\n3. Klicka på ”Nästa steg” när det är klart.",
-        "curtain_intelligent_calibration_step2": "1. Flytta gardinen till helt ”öppen”.\n\n2. Flytta gardinen för att helt ”stängd”.\n\n3. När stegen i 1 och 2 är klara klickar du sedan på ”Kalibrera”.",
+        "curtain_intelligent_calibration_step1": "Observera att för intelligent kalibrering behöver du en väggbrytare för att öppna/stänga gardinen helt. Om du inte använder en väggbrytare, använd snabbkalibreringsläget.\n\n1. Installera gardinmotorn korrekt före kalibrering så att gardinen kan öppnas/stängas helt.\n\n2. Klicka på \"Nästa steg\".",
+        "curtain_intelligent_calibration_step2": "1. Tryck på väggbrytaren för att öppna gardinen tills den är helt öppen.\n\n2. Tryck på väggbrytaren för att stänga gardinen tills den är helt stängd.\n\n3. När stegen i 1 och 2 är klara klickar du på \"Kalibrera\".",
         "curtain_motor_steering": "Motorstyrning",
         "curtain_motor_steering1": "Riktning framåt",
         "curtain_motor_steering1_description": "Gardinmotorn går framåt",
@@ -29164,7 +29164,7 @@ export default {
         "switch_interlock_delete_popup_topic": "Vill du verkligen ta bort växelstyrningen?",
         "switch_interlock_editbtn_text": "Ta bort växelstyrning",
         "switch_interlock_edittitle": "Redigera växelstyrningen",
-        "switch_interlockingdescription": "För att tillåta användning av endast en strömbrytare åt gången",
+        "switch_interlockingdescription": "Tillåter endast att en strömbrytare slås på åt gången",
         "switch_longpress": "Långt tryck",
         "switch_overcharge_headline_description": "Funktionen stänger automatiskt av laddning av dina mobila enheter, inklusive mobiltelefoner och kraftbanker, när de är fulladdade för att förhindra överladdning och förlänga batteriets livslängd.",
         "switch_overcharge_headline_text": "Överladdningsskydd",
@@ -29186,9 +29186,9 @@ export default {
         "switchname_2channel": "Smart switch 2 kanal",
         "switchname_4channel": "Smart strömbrytare 4 kanal",
         "switchonlyonce": "Det är bara tillåtet att byta läge en gång per dag.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Vippbrytare",
+        "switchstate2selection": "Synkroniserad vippbrytare",
+        "switchstate3selection": "Tryckknapp",
         "switchtitle_energyconsumption": "Vill du verkligen gå över till energiförbrukning?",
         "switchtitle_energygeneration": "Vill du verkligen gå över till energiproduktion?",
         "temperature": "Temperatur",
@@ -29411,10 +29411,10 @@ export default {
         "bt_shs_google_button_cancel_enabling": "İptal et",
         "btsolar_groups_inductionsync": "Hareket algılama senkronizasyonu",
         "btsolar_groups_inductionsync_description": "Tüm lambaların hareket sensörünü senkronize ederek, bir tanesinde hareket algılandığında diğerlerinin de yanmasını sağlamak.",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
-        "camera_edit_site_name": "Edit Site name",
-        "camera_errmsg_site_point_limit": "Failed to enable site patrol because less than 2 sites were added.",
+        "camera_calibration": "Kamera kalibrasyonu",
+        "camera_calibration_desc": "Kamera kalibrasyonu yaklaşık 25 saniye sürer. Devam etmek istiyor musunuz?",
+        "camera_edit_site_name": "Site adını düzenle",
+        "camera_errmsg_site_point_limit": "2'den az site eklendiğinden site devriyesi etkinleştirilemedi.",
         "camera_feature_1_headline": "Siren",
         "camera_feature_2_headline": "Mikrofon",
         "camera_feature_5_headline": "Kayıtlar",
@@ -29423,34 +29423,34 @@ export default {
         "camera_local_recording": "Yerel Kayıt",
         "camera_mic_two_way_talking": "Arıyorum...",
         "camera_net_err": "Cihaz bağlantısı kesildi, lütfen cihazı ve ağını kontrol edin",
-        "camera_operation_site_error": "Not editable in site patrol mode",
-        "camera_patrol": "Patrolling",
-        "camera_patrol_cruise_time": "Cruise time：{0} - {1}",
-        "camera_patrol_enable": "Enable patrolling",
-        "camera_preset_point": "Preset Point",
+        "camera_operation_site_error": "Site devriye modunda düzenlenemez",
+        "camera_patrol": "Devriye gezme",
+        "camera_patrol_cruise_time": "Seyir süresi:{0} - {1}",
+        "camera_patrol_enable": "Devriyeyi etkinleştir",
+        "camera_preset_point": "Ön Ayar Noktası",
         "camera_private_mode_sleep": "Cihaz uyku modunda",
         "camera_private_mode_sleep_close": "Kamerayı aç",
         "camera_re_connect_stream": "Yeniden bağlanın, lütfen bekleyin",
-        "camera_restart_device_dialog_content": "Are you sure that you want to restart the device?",
-        "camera_select_patrol_mode": "Select a patrolling mode",
-        "camera_select_patrol_mode_panoramic": "Panoramic patrolling",
-        "camera_select_patrol_mode_panoramic_desc": "Camera will patrol every angle",
-        "camera_select_patrol_mode_site": "Site patrolling",
-        "camera_select_patrol_mode_site_desc": "The camera will patrol all sites and stay at each site for 10s",
-        "camera_set_patrol_time": "Select a patrolling time",
-        "camera_set_patrol_time_all_day": "All-day patrolling",
-        "camera_set_patrol_time_all_day_desc": "Patrolling will continue for 24x7 hours",
-        "camera_set_patrol_time_timed": "Timed patrolling",
-        "camera_set_patrol_time_timed_desc": "Patrolling will take effect as scheduled",
-        "camera_settings_anti_dismantle_topic": "Anti dismantle alarm",
+        "camera_restart_device_dialog_content": "Cihazı yeniden başlatmak istediğinizden emin misiniz?",
+        "camera_select_patrol_mode": "Bir devriye modu seçin",
+        "camera_select_patrol_mode_panoramic": "Panoramik devriye",
+        "camera_select_patrol_mode_panoramic_desc": "Kamera her açıdan devriye gezecek",
+        "camera_select_patrol_mode_site": "Site devriyesi",
+        "camera_select_patrol_mode_site_desc": "Kamera tüm sahaları devriye gezecek ve her sahada 10 saniye kalacak",
+        "camera_set_patrol_time": "Bir devriye zamanı seçin",
+        "camera_set_patrol_time_all_day": "Tüm gün devriye",
+        "camera_set_patrol_time_all_day_desc": "Devriye çalışmaları 7/24 devam edecek",
+        "camera_set_patrol_time_timed": "Zamanlı devriye",
+        "camera_set_patrol_time_timed_desc": "Devriye faaliyetleri planlandığı şekilde gerçekleştirilecek",
+        "camera_settings_anti_dismantle_topic": "Sökme önleyici alarm",
         "camera_settings_anti_flicker_50hz": "50 Hz",
         "camera_settings_anti_flicker_60hz": "60 Hz",
-        "camera_settings_anti_flicker_topic": "Anti-flicker",
+        "camera_settings_anti_flicker_topic": "Titreşim önleyici",
         "camera_settings_button_text": "Biçimlendir",
-        "camera_settings_device_restart": "Device restart",
+        "camera_settings_device_restart": "Cihaz yeniden başlatılıyor",
         "camera_settings_format_sd_card_note": "Tüm verilerinizin silineceğini ve kurtarılamayacağını unutmayın",
         "camera_settings_format_sd_card_topic": "SD kartı gerçekten biçimlendirmek istiyor musunuz?",
-        "camera_settings_humanoid_focus_topic": "Humanoid focus",
+        "camera_settings_humanoid_focus_topic": "İnsansı odak",
         "camera_settings_night_vision_description": "Bu işlev, düşük ışık veya karanlık koşullarda görüntü yakalamayı sağlar. Bu özellik, çeşitli uygulamalarda gözetim, güvenlik ve durumsal farkındalığı artırır.",
         "camera_settings_night_vision_firstbox_topic1": "Otomatik",
         "camera_settings_night_vision_firstbox_topic1_description": "Sadece gerektiğinde gece görüşünü etkinleştirir",
@@ -29464,13 +29464,13 @@ export default {
         "camera_settings_night_vision_mode_topic": "Gece Modu",
         "camera_settings_night_vision_topic": "Gece görüşü",
         "camera_settings_onvif_ip_topic": "IP",
-        "camera_settings_onvif_ip_type_dynamic": "Dynamic IP",
-        "camera_settings_onvif_ip_type_static": "Static IP",
-        "camera_settings_onvif_ip_type_topic": "Onvif mode",
-        "camera_settings_onvif_set_password_tips": "The device password supports 8-32 characters and must contain uppercase and lowercase letters as well as digits.",
-        "camera_settings_onvif_switch_topic": "Onvif switch",
-        "camera_settings_onvif_topic": "Onvif",
-        "camera_settings_power_management_settings_topic": "Power Management Settings",
+        "camera_settings_onvif_ip_type_dynamic": "Dinamik IP",
+        "camera_settings_onvif_ip_type_static": "Statik IP",
+        "camera_settings_onvif_ip_type_topic": "Modası geçmiş moda",
+        "camera_settings_onvif_set_password_tips": "Cihaz şifresi 8-32 karakter uzunluğunda olmalı ve büyük-küçük harflerin yanı sıra rakamlardan oluşmalıdır.",
+        "camera_settings_onvif_switch_topic": "Onvif anahtarı",
+        "camera_settings_onvif_topic": "Çevrimiçi",
+        "camera_settings_power_management_settings_topic": "Güç Yönetimi Ayarları",
         "camera_settings_recording_mode_firstbox_topic1": "Hareket tetiklemeli",
         "camera_settings_recording_mode_firstbox_topic1_description": "Yalnızca bir hareket algılandığında kayıt yapar",
         "camera_settings_recording_mode_firstbox_topic2": "Sürekli",
@@ -29487,12 +29487,12 @@ export default {
         "camera_settings_talk_mode_firstbox_option2_topic": "İki yönlü iletişim",
         "camera_settings_talk_mode_secondtopic": "Konuşma ortamdan etkilenebilir. Duruma bağlı olarak, tek yönlü veya çift yönlü iletişim öneriyoruz.",
         "camera_settings_talk_mode_topic": "Konuşma modu",
-        "camera_site": "Site",
-        "camera_site_delete_dialog_title": "Do you really want to delete the site?",
-        "camera_site_name": "Site name",
-        "camera_site_overview_empty_button_add_text": "Add site",
-        "camera_site_overview_empty_information_text": "You have not added a site yet",
-        "camera_site_overview_warning_max_number_text": "Maximum number of sites has been reached",
+        "camera_site": "alan",
+        "camera_site_delete_dialog_title": "Siteyi gerçekten silmek istiyor musunuz?",
+        "camera_site_name": "Site adı",
+        "camera_site_overview_empty_button_add_text": "Site ekle",
+        "camera_site_overview_empty_information_text": "Henüz bir site eklemediniz",
+        "camera_site_overview_warning_max_number_text": "Maksimum site sayısına ulaşıldı",
         "camera_status_indicator": "Durum göstergesi",
         "camera_tile_camera_button_label_photo": "Fotoğraf çek",
         "camera_tile_camera_button_label_video": "Video Kaydet",
@@ -29754,30 +29754,30 @@ export default {
         "country_scotland": "İskoçya",
         "country_selection_textfield_headline_search": "Ara",
         "country_sy": "Suriye",
-        "curation_calibration_callibrate_btn_text": "Calibrate",
-        "curation_calibration_nextbtn_text": "Next step",
+        "curation_calibration_callibrate_btn_text": "kalibre et",
+        "curation_calibration_nextbtn_text": "Sonraki adım",
         "current_temp_humidity": "Mevcut toprak sıcaklığı ve nemi",
-        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
-        "curtain_calibration_progress_text": "Calibration in progress.....",
-        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_failed_text": "Akıllı perdenin kalibrasyon işlemi başarısız oldu.",
+        "curtain_calibration_progress_text": "Kalibrasyon devam ediyor.....",
+        "curtain_calibration_success_text": "Akıllı perdenin kalibrasyon işlemi başarılı oldu.",
         "curtain_calibration_tryagin_text": "Tekrar deneyin",
-        "curtain_control_headline_text": "Curtain",
-        "curtain_control_title": "Curtain control",
-        "curtain_fast_calibration": "Fast calibration",
-        "curtain_fast_calibration_step1": "1. Take a stop watch.\n\n2. Close the curtains fully.\n\n3. Open the curtains fully and measure the time with stop watch from fully close to fully open.\n\n4. Click on \"Next Step\" and enter rounded up integer of seconds you measured with stop watch.",
-        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain from fully closed to fully open.",
-        "curtain_fast_toast_text": "Fast calibration is just allowed when the curtain is fully closed at 0%.",
-        "curtain_intelligent_calibration": "Intelligent calibration",
-        "curtain_intelligent_calibration_step1": "Please note for intelligent calibration, you need a wall switch to fully open/close the curtain. If you are not using a wall switch, please use the fast calibration mode.\n\n1. Install the curtain motor correctly before calibration so that the curtain can be fully opened/closed.\n\n2. Click “Next Step”.",
-        "curtain_intelligent_calibration_step2": "1. Press the wall switch to open the curtain until it is fully open.\n\n2. Press the wall switch to close the curtain until it is fully closed.\n\n3. Once the steps in 1 and 2 are done, then click “Calibrate\".",
-        "curtain_motor_steering": "Motor steering",
-        "curtain_motor_steering1": "Forward direction",
-        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
-        "curtain_motor_steering2": "Backward direction",
-        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
-        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
-        "curtain_summary_action_txt_1": "Open",
-        "curtain_summary_action_txt_2": "Close",
+        "curtain_control_headline_text": "Perde",
+        "curtain_control_title": "Perde kontrolü",
+        "curtain_fast_calibration": "Hızlı kalibrasyon",
+        "curtain_fast_calibration_step1": "1. Bir kronometre alın. 2. Perdeleri tamamen kapatın. 3. Perdeleri tamamen açın ve kronometre ile zamanı tamamen kapalıdan tamamen açık konuma kadar ölçün. 4. "Sonraki Adım"a tıklayın ve kronometre ile ölçtüğünüz saniyelerin yuvarlatılmış tam sayısını girin.",
+        "curtain_fast_calibration_step2": "Lütfen perdenin tam kapalı konumundan tam açık konumuna gelmesi için gereken süreyi giriniz.",
+        "curtain_fast_toast_text": "Hızlı kalibrasyon sadece perde %0 seviyesinde tamamen kapalı olduğunda mümkündür.",
+        "curtain_intelligent_calibration": "Akıllı kalibrasyon",
+        "curtain_intelligent_calibration_step1": "Akıllı kalibrasyon için perdeyi tamamen açmak/kapatmak için bir duvar anahtarına ihtiyacınız olduğunu lütfen unutmayın. Duvar anahtarı kullanmıyorsanız lütfen hızlı kalibrasyon modunu kullanın. 1. Perde motorunu, perdenin tamamen açılıp kapanabilmesi için kalibrasyondan önce doğru şekilde takın. 2. “Sonraki Adım”a tıklayın.",
+        "curtain_intelligent_calibration_step2": "1. Perdeyi tamamen açılana kadar açmak için duvar anahtarına basın. 2. Perdeyi tamamen kapanana kadar kapatmak için duvar anahtarına basın. 3. 1 ve 2'deki adımlar tamamlandıktan sonra "Kalibre Et"e tıklayın.",
+        "curtain_motor_steering": "Motorlu direksiyon",
+        "curtain_motor_steering1": "İleri yön",
+        "curtain_motor_steering1_description": "Perde motoru ileri yönde çalışır",
+        "curtain_motor_steering2": "Geriye doğru yön",
+        "curtain_motor_steering2_description": "Perde motoru geriye doğru çalışır",
+        "curtain_motor_steering_tip": "Perdenin motor yönlendirme yönünü yapılandırmak için",
+        "curtain_summary_action_txt_1": "Açık",
+        "curtain_summary_action_txt_2": "Kapalı",
         "daily": "Günlük",
         "date": "Tarih",
         "date_type": "Tarih türü",
@@ -29920,13 +29920,13 @@ export default {
         "history_socket_headline_text": "Geçmiş",
         "home_screen_home_dialog_yes_con": "Anlaşıldı",
         "humidity": "Nem",
-        "hybrid_headline_text": "Hybrid switch",
-        "hybrid_switchstate_setting1": "Setting 1",
-        "hybrid_switchstate_setting2": "Setting 2",
-        "hybrid_switchstate_setting3": "Setting 3",
-        "hybrid_switchstate_setting3_description": "Switch button",
-        "hybrid_switchstate_setting_text": "Switch state setting",
-        "hybrid_switchstate_title": "Switch state",
+        "hybrid_headline_text": "Hibrit anahtar",
+        "hybrid_switchstate_setting1": "Ayar 1",
+        "hybrid_switchstate_setting2": "Ayar 2",
+        "hybrid_switchstate_setting3": "Ayar 3",
+        "hybrid_switchstate_setting3_description": "Anahtar düğmesi",
+        "hybrid_switchstate_setting_text": "Anahtar durumu ayarı",
+        "hybrid_switchstate_title": "Durum değiştir",
         "infobutton_totalenergy": "Toplam enerji sadece son sıfırlamadan sonraki toplam tüketim/üretim verilerini gösterir.\nVeriler sonraki günlerde açılmıştır:",
         "intermittent_time": "Aralıklı Zaman",
         "irrigation": "Sulama",
@@ -30070,16 +30070,16 @@ export default {
         "motion_detection_add_time_schedule_headline_text": "Yeni bir program ekle",
         "motion_detection_add_time_schedule_selectionfield_text": "İsim",
         "motion_detection_add_time_schedule_system_back_text": "Zaman Çizelgesi",
-        "motion_detection_alarm_interval": "Alarm Interval",
+        "motion_detection_alarm_interval": "Alarm Aralığı",
         "motion_detection_cloud_camera_settings_text": "Faaliyet alanı",
         "motion_detection_cloud_camera_settings_text2": "Faaliyet alanını değiştir",
         "motion_detection_description_text": "Bir hareket algılandığında seçme seçenekleri.",
-        "motion_detection_detect_baby_crying": "Baby cry detection",
+        "motion_detection_detect_baby_crying": "Bebek ağlaması tespiti",
         "motion_detection_headline_text": "Hareket algılama",
         "motion_detection_no_safe_mode_text": "Tetikleyici aydınlatma",
         "motion_detection_no_safe_mode_trigger_text": "Tetikleme bildirimleri",
-        "motion_detection_pir": "Motion detection level",
-        "motion_detection_select_detection_sensitivity_level": "Detection sensitivity level",
+        "motion_detection_pir": "Hareket algılama seviyesi",
+        "motion_detection_select_detection_sensitivity_level": "Algılama hassasiyet seviyesi",
         "motion_detection_selectionfield2_topic_text": "Lüks değer",
         "motion_detection_selectionfield2_value2_text": "300 (alacakaranlık)",
         "motion_detection_selectionfield2_value3_text": "50 (akşam)",
@@ -30087,7 +30087,7 @@ export default {
         "motion_detection_selectionfield2_value5_text": "5 (karanlık)",
         "motion_detection_selectionfield2_value_text": "2000 (gün)",
         "motion_detection_selectionfield_topic_text": "Tetikleme hassasiyeti",
-        "motion_detection_sound_detection": "Sound detection",
+        "motion_detection_sound_detection": "Ses algılama",
         "motion_detection_standby_light_brightness_text": "Bekleme ışığı parlaklığı",
         "motion_detection_standby_light_text1": "Bekleme ışığı",
         "motion_detection_standby_light_text2": "Belirli bir süre sonra kapatma",
@@ -30098,7 +30098,7 @@ export default {
         "motion_detection_time_schedule_notifications_field_weekdays_text4": "Her gün",
         "motion_detection_time_schedule_notifications_warning_text": "Maksimum zaman çizelgesi sayısına ulaşıldı.",
         "motion_detection_trigger_text": "Tetikleyici aydınlatma",
-        "motion_detection_video_recording_duration": "Video recording duration",
+        "motion_detection_video_recording_duration": "Video kayıt süresi",
         "motion_detection_with_safe_mode_brightness_text": "Aydınlatma parlaklığı",
         "motion_detection_with_safe_mode_safetymode_sensing_text": "Algılama mesafesi",
         "motion_detection_with_safe_mode_safetymode_value4_text": "Özelleştirilmiş",
@@ -30121,11 +30121,11 @@ export default {
         "plug_energyconsumptionswitch": "Enerji tüketim moduna geçme",
         "plug_energygenerationswitch": "Enerji üretim moduna geçme",
         "pos_mode_switching_fail_tips": "Yanlış şifre. Lütfen doğru şifreyi kontrol edin ve girin.",
-        "power_management_battery_remaining": "Remaining battery level",
-        "power_management_low_battery_alarm_threshold": "Set the level the battery should have for the alarm to start",
-        "power_management_power_source": "Power source",
+        "power_management_battery_remaining": "Kalan pil seviyesi",
+        "power_management_low_battery_alarm_threshold": "Alarmın başlaması için pilin sahip olması gereken seviyeyi ayarlayın",
+        "power_management_power_source": "Güç kaynağı",
         "power_management_power_source_battery": "Pil",
-        "power_management_power_source_power_cable": "Power cable",
+        "power_management_power_source_power_cable": "Güç kablosu",
         "power_off_memory_customized_description": "Kullanıcı tanımlı renk ve parlaklık değeri seçimi.",
         "power_off_memory_default_state_description": "Varsayılan renk ve parlaklık değerine dönün.",
         "power_off_memory_default_state_title": "Varsayılan durum",
@@ -30315,52 +30315,52 @@ export default {
         "striplight_adaptbutton": "Uyarlamak",
         "striplight_lengthadaptationtext": "Şerit ışığı kesilmişse, uyarlamak için Uygulamadaki uzunluğu ayarlayabilirsiniz.",
         "striplight_lengthtitle": "Şerit Işık uzunluğu",
-        "switch1_active_timer_field_small_off_text": "Switch 1 off at {0}",
-        "switch1_active_timer_field_small_on_text": "Switch 1 on at {0}",
-        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
-        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch1_active_timer_field_small_off_text": "1'i {0} konumundan kapatın",
+        "switch1_active_timer_field_small_on_text": "1'i {0} konumunda açın",
+        "switch2_active_timer_field_small_off_text": "2'yi {0} içinde kapatın",
+        "switch2_active_timer_field_small_on_text": "2'yi {0} içinde açın",
         "switch_4channelfunctions1": "Anahtar 1",
         "switch_4channelfunctions2": "Anahtar 2",
-        "switch_4channelfunctions3": "Switch 3",
-        "switch_4channelfunctions4": "Switch 4",
-        "switch_4channels1setting": "Switch 1 setting",
-        "switch_4channels2setting": "Switch 2 setting",
-        "switch_4channels3setting": "Switch 3 setting",
-        "switch_4channels4setting": "Switch 4 setting",
-        "switch_active_timer_field_small_off_text": "Switch off in {0}",
-        "switch_active_timer_field_small_on_text": "Switch on in {0}",
-        "switch_doublepress": "Double press",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "Allows only one switch to be turned on at a time",
-        "switch_longpress": "Long press",
+        "switch_4channelfunctions3": "Anahtar 3",
+        "switch_4channelfunctions4": "Anahtar 4",
+        "switch_4channels1setting": "Anahtar 1 ayarı",
+        "switch_4channels2setting": "Anahtar 2 ayarı",
+        "switch_4channels3setting": "Anahtar 3 ayarı",
+        "switch_4channels4setting": "Anahtar 4 ayarı",
+        "switch_active_timer_field_small_off_text": "Kapat {0}",
+        "switch_active_timer_field_small_on_text": "{0} içinde açın",
+        "switch_doublepress": "Çift basış",
+        "switch_interlock": "Birbirine geçen",
+        "switch_interlock_addbtn_text": "Kilit ekle",
+        "switch_interlock_addtitle": "Yeni bir kilitleme ekle",
+        "switch_interlock_delete_popup_topic": "Gerçekten kilidi silmek istiyor musunuz?",
+        "switch_interlock_editbtn_text": "Kilitlemeyi sil",
+        "switch_interlock_edittitle": "Kilidi düzenle",
+        "switch_interlockingdescription": "Aynı anda yalnızca bir anahtarın açılmasına izin verir",
+        "switch_longpress": "Uzun basış",
         "switch_overcharge_headline_description": "Bu özellik, aşırı şarjı önlemek ve pil ömrünü uzatmak için tamamen şarj olduklarında cep telefonları ve güç bankaları da dahil olmak üzere mobil cihazlarınızı şarj etmeyi otomatik olarak kapatır.",
         "switch_overcharge_headline_text": "Aşırı Şarj Koruması",
-        "switch_singlepress": "Single press",
+        "switch_singlepress": "Tek basış",
         "switchdescription_energy": "Toplam enerji verilerinin sıfırlanacağını ve tekrar kurtarılamayacağını unutmayın.",
         "switchinching_overview_description_text": "Belirli bir süre sonra cihazı otomatik olarak kapatmak için.",
-        "switchmodule_switch1description": "Switch 1 description",
+        "switchmodule_switch1description": "Anahtar 1 açıklaması",
         "switchmodule_switch1title": "Anahtar 1",
-        "switchmodule_switch2description": "Switch 2 description",
+        "switchmodule_switch2description": "Anahtar 2 açıklaması",
         "switchmodule_switch2title": "Anahtar 2",
         "switchmodule_switchdescription": "Anahtar açıklaması",
         "switchmodule_switchtitle": "Geçiş",
-        "switchmodule_typesetting": "Switch state",
-        "switchmodule_typesetting1": "Each toggle of the wall switch triggers a change in the device's state.",
-        "switchmodule_typesetting2": "Wall switch positions correspond to fixed ON and OFF states. Turning the switch ON sets the device to ON; if it's already ON, the command is ignored and the state remains unchanged.",
-        "switchmodule_typesetting3": "If your wall switch only stays in the ON position while being pressed and automatically returns to OFF when released, it behaves like a momentary (impulse) switch.",
-        "switchmodule_typesettingdescription": "To configure the switch state setting",
-        "switchname_1channel": "Smart switch 1 channel",
-        "switchname_2channel": "Smart switch 2 channel",
-        "switchname_4channel": "Smart switch 4 channel",
+        "switchmodule_typesetting": "Durum değiştir",
+        "switchmodule_typesetting1": "Duvar anahtarının her açılıp kapanması cihazın durumunda bir değişikliği tetikler.",
+        "switchmodule_typesetting2": "Duvar anahtarı konumları sabit AÇIK ve KAPALI durumlarına karşılık gelir. Anahtarı AÇIK konuma getirmek cihazı AÇIK konuma getirir; zaten AÇIK konumdaysa, komut göz ardı edilir ve durum değişmeden kalır.",
+        "switchmodule_typesetting3": "Duvar anahtarınız sadece basıldığında AÇIK konumunda kalıyorsa ve bırakıldığında otomatik olarak KAPALI konumuna dönüyorsa, anlık (darbeli) anahtar gibi davranır.",
+        "switchmodule_typesettingdescription": "Anahtar durumu ayarını yapılandırmak için",
+        "switchname_1channel": "Akıllı anahtar 1 kanal",
+        "switchname_2channel": "Akıllı anahtar 2 kanal",
+        "switchname_4channel": "Akıllı anahtar 4 kanal",
         "switchonlyonce": "Modun değiştirilmesine günde yalnızca bir kez izin verilir.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Salıncak anahtarı",
+        "switchstate2selection": "Senkronize sallanan anahtar",
+        "switchstate3selection": "Basma düğmesi",
         "switchtitle_energyconsumption": "Gerçekten enerji tüketimine geçmek istiyor musunuz?",
         "switchtitle_energygeneration": "Gerçekten enerji üretimine geçmek istiyor musunuz?",
         "temperature": "Sıcaklık",
@@ -30424,12 +30424,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Soket1 yaklaşık {0}'de kapatılacaktır",
         "timer_powerstrip_socket1_switched_on_text": "Soket1 yaklaşık {0}'de açılacaktır",
         "timer_sockets_button_text": "Başlat",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Anahtar 1, yaklaşık {0} kapatılacaktır.",
+        "timer_switch1_active_timer_field_description_on_text": "Anahtar 1, yaklaşık {0}",
+        "timer_switch2_active_timer_field_description_off_text": "Anahtar 2 yaklaşık {0} kapatılacaktır.",
+        "timer_switch2_active_timer_field_description_on_text": "Anahtar 2 yaklaşık {0} de açılacaktır.",
+        "timer_switch_active_timer_field_description_off_text": "Anahtar yaklaşık {0}",
+        "timer_switch_active_timer_field_description_on_text": "Anahtar yaklaşık {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "İkincil aydınlatma",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Ana aydınlatma",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Aydınlatma:",
@@ -30583,8 +30583,8 @@ export default {
         "bt_shs_google_button_cancel_enabling": "Скасувати",
         "btsolar_groups_inductionsync": "Синхронізація у виявленні руху",
         "btsolar_groups_inductionsync_description": "Синхронізувати датчик руху всіх світильників так, щоб якщо один з них виявить рух, то інші також вмикаються",
-        "camera_calibration": "Camera calibration",
-        "camera_calibration_desc": "Camera calibration takes about 25 seconds. Do you want to continue?",
+        "camera_calibration": "Калібрування камери",
+        "camera_calibration_desc": "Калібрування камери триває близько 25 секунд.  Бажаєте продовжити?",
         "camera_edit_site_name": "Редагувати назву об'єкта спостереження",
         "camera_errmsg_site_point_limit": "Для активації моніторингу потрібно додати як мінімум два об'єкти спостереження",
         "camera_feature_1_headline": "Сирена",
@@ -30595,7 +30595,7 @@ export default {
         "camera_local_recording": "Ведення локальних записів",
         "camera_mic_two_way_talking": "Виклик.....",
         "camera_net_err": "Підключення до пристрою перервано, будь ласка, перевірте пристрій та його мережу",
-        "camera_operation_site_error": "Not editable in site patrol mode",
+        "camera_operation_site_error": "Не можна редагувати в режимі перегляду сайту",
         "camera_patrol": "Автоматизоване спостереження",
         "camera_patrol_cruise_time": "Час спостереження: {0} – {1}",
         "camera_patrol_enable": "Увімкнути спостереження",
@@ -31530,9 +31530,9 @@ export default {
         "switchname_2channel": "Розумний перемикач 2 канальний",
         "switchname_4channel": "Розумний перемикач 4 канальний",
         "switchonlyonce": "Зміна режиму дозволена тільки один раз на добу.",
-        "switchstate1selection": "Rocker switch",
-        "switchstate2selection": "Synchronized rocker switch",
-        "switchstate3selection": "Push button",
+        "switchstate1selection": "Кулісний перемикач",
+        "switchstate2selection": "Синхронізований кулісний перемикач",
+        "switchstate3selection": "Натискна кнопка",
         "switchtitle_energyconsumption": "Ви дійсно хочете перейти в режим \"Енергоспоживання\"?",
         "switchtitle_energygeneration": "Ви дійсно бажаєте перейти в режим \"Генерації енергії\"?",
         "temperature": "Температура",