@ledvance/base 1.3.49 → 1.3.51

package/src/i18n/strings.ts

@@ -414,7 +414,30 @@ export default {
         "country_scotland": "Escocia",
         "country_selection_textfield_headline_search": "Búsqueda",
         "country_sy": "Siria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Temperatura y humedad actuales del suelo",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "diario",
         "date": "Fecha",
         "date_type": "Tipo de fecha",
@@ -930,6 +953,12 @@ export default {
         "striplight_adaptbutton": "Adaptar",
         "striplight_lengthadaptationtext": "Si la tira de luz se ha cortado, puedes ajustar la longitud en la aplicación para adaptarla.",
         "striplight_lengthtitle": "Longitud de la tira de luz",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -946,7 +975,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Cambiar de modo sólo está permitido una vez al día.",
         "switchtitle_energyconsumption": "¿De verdad quieres pasar al consumo de energía?",
         "switchtitle_energygeneration": "¿De verdad quieres cambiar a la generación de energía?",
@@ -1473,7 +1506,30 @@ export default {
         "country_scotland": "Skotsko",
         "country_selection_textfield_headline_search": "Vyhledávání",
         "country_sy": "Sýrie",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Aktuální teplota a vlhkost půdy",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Denně",
         "date": "Rande",
         "date_type": "Typ data",
@@ -1989,6 +2045,12 @@ export default {
         "striplight_adaptbutton": "Přizpůsobit",
         "striplight_lengthadaptationtext": "Pokud bylo světlo proužku oříznuto, můžete upravit délku v aplikaci a přizpůsobit ji.",
         "striplight_lengthtitle": "Délka světelného pásu",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -2005,7 +2067,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Přepnutí režimu je povoleno pouze jednou denně.",
         "switchtitle_energyconsumption": "Opravdu chcete přejít na spotřebu energie?",
         "switchtitle_energygeneration": "Opravdu chcete přejít na výrobu energie?",
@@ -2532,7 +2598,30 @@ export default {
         "country_scotland": "Scotland",
         "country_selection_textfield_headline_search": "Search",
         "country_sy": "Syria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Current soil temperature and humidity",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Daily",
         "date": "Date",
         "date_type": "Date type",
@@ -3048,6 +3137,12 @@ export default {
         "striplight_adaptbutton": "Adapt",
         "striplight_lengthadaptationtext": "If the strip light has been cut, then you can adjust the length in the App to adapt it.",
         "striplight_lengthtitle": "Strip Light length",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -3064,7 +3159,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Switching the mode is only allowed once a day.",
         "switchtitle_energyconsumption": "Do you really want to switch to energy consumption?",
         "switchtitle_energygeneration": "Do you really want to switch to energy generation?",
@@ -3591,7 +3690,30 @@ export default {
         "country_scotland": "Шотландия",
         "country_selection_textfield_headline_search": "Търсене",
         "country_sy": "Сирия",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Текуща температура и влажност на почвата",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Ежедневно",
         "date": "Дата",
         "date_type": "Тип дата",
@@ -4107,6 +4229,12 @@ export default {
         "striplight_adaptbutton": "Адаптиране",
         "striplight_lengthadaptationtext": "Ако светлината на лентата е отрязана, можете да регулирате дължината в приложението, за да я адаптирате.",
         "striplight_lengthtitle": "Лента Светла дължина",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -4123,7 +4251,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Превключването на режима е разрешено само веднъж на ден.",
         "switchtitle_energyconsumption": "Наистина ли искате да преминете към консумация на енергия?",
         "switchtitle_energygeneration": "Наистина ли искате да преминете към производство на енергия?",
@@ -4650,7 +4782,30 @@ export default {
         "country_scotland": "Skotland",
         "country_selection_textfield_headline_search": "Søg",
         "country_sy": "Syrien",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Nuværende jordtemperatur og fugtighed",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Dagligt",
         "date": "Dato",
         "date_type": "Datotype",
@@ -5047,16 +5202,16 @@ export default {
         "smoke_alerteffect": "Røg detekteret",
         "smoke_alertfree": "Ingen røg registreret",
         "smoke_equipmentselftest": "Selvtest af udstyr",
-        "socket1_active_timer_field_small_off_text": "Socket 1 off in {0}",
-        "socket1_active_timer_field_small_on_text": "Socket 1 on in {0}",
-        "socket2_active_timer_field_small_off_text": "Socket 2 off in {0}",
-        "socket2_active_timer_field_small_on_text": "Socket 2 on in {0}",
-        "socket3_active_timer_field_small_off_text": "Socket 3 off in {0}",
-        "socket3_active_timer_field_small_on_text": "Socket 3 on in {0}",
-        "socket4_active_timer_field_small_off_text": "Socket 4 off in {0}",
-        "socket4_active_timer_field_small_on_text": "Socket 4 on in {0}",
-        "socket5_active_timer_field_small_off_text": "Socket 5 off in {0}",
-        "socket5_active_timer_field_small_on_text": "Socket 5 on in {0}",
+        "socket1_active_timer_field_small_off_text": "Stik 1 slukker om {0}",
+        "socket1_active_timer_field_small_on_text": "Stik 1 er tændt {0}",
+        "socket2_active_timer_field_small_off_text": "Stik 2 slukker om {0}",
+        "socket2_active_timer_field_small_on_text": "Stik 2 er tændt {0}",
+        "socket3_active_timer_field_small_off_text": "Stik 3 slukker om {0}",
+        "socket3_active_timer_field_small_on_text": "Stik 3 er tændt {0}",
+        "socket4_active_timer_field_small_off_text": "Stik 4 slukker om {0}",
+        "socket4_active_timer_field_small_on_text": "Stik 4 er tændt {0}",
+        "socket5_active_timer_field_small_off_text": "Stik 5 slukker om {0}",
+        "socket5_active_timer_field_small_on_text": "Stik 5 er tændt {0}",
         "socket_settings_firstbox_status1_description": "Enheden forbliver slukket",
         "socket_settings_firstbox_status2_description": "Enheden forbliver tændt",
         "socket_settings_firstbox_status3_description": "Gå tilbage til den tilstand, der var, før strømmen blev slukket",
@@ -5073,8 +5228,8 @@ export default {
         "sockets_specific_settings_relay_status": "Når der tændes, så:",
         "sockets_specific_settings_relay_status_remember": "Husk sidste status",
         "sockets_specific_settings_switch_inching": "Automatisk sluk",
-        "socketusb_active_timer_field_small_off_text": "USB off in {0}",
-        "socketusb_active_timer_field_small_on_text": "USB on in {0}",
+        "socketusb_active_timer_field_small_off_text": "USB slukker om {0}",
+        "socketusb_active_timer_field_small_on_text": "USB er tændt i {0}",
         "software_update_found_failed_update_error_5012": "Enheden er offline.",
         "solar_bt_pp_battery_headline": "Batteri",
         "solar_bt_pp_field_dm": "Dynamisk, farverig stemning",
@@ -5166,23 +5321,33 @@ export default {
         "striplight_adaptbutton": "Tilpas",
         "striplight_lengthadaptationtext": "Hvis strimlyset er skåret, kan du justere længden i appen for at tilpasse det.",
         "striplight_lengthtitle": "Strip Light længde",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "To allow operation of only one switch at a time",
+        "switch1_active_timer_field_small_off_text": "Kontakt 1 slukker om {0}",
+        "switch1_active_timer_field_small_on_text": "Kontakt 1 tænder om {0}",
+        "switch2_active_timer_field_small_off_text": "Kontakt 2 slukker om {0}",
+        "switch2_active_timer_field_small_on_text": "Kontakt 2 tænder om {0}",
+        "switch_active_timer_field_small_off_text": "Slukker om {0}",
+        "switch_active_timer_field_small_on_text": "Tænder om {0}",
+        "switch_interlock": "Sammenkobling",
+        "switch_interlock_addbtn_text": "Tilføj indkoblingslås",
+        "switch_interlock_addtitle": "Tilføj en ny indkoblingslås",
+        "switch_interlock_delete_popup_topic": "Er du sikker på, du vil slette indkoblingslåsen?",
+        "switch_interlock_editbtn_text": "Slet indkoblingslås",
+        "switch_interlock_edittitle": "Redigér indkoblingslås",
+        "switch_interlockingdescription": "For kun at tillade betjening af én kontakt ad gangen",
         "switch_overcharge_headline_description": "Funktionen slukker automatisk opladning af dine mobile enheder, herunder mobiltelefoner og strømbanker, når de er fuldt opladet for at forhindre overopladning og forlænge batteriets levetid.",
         "switch_overcharge_headline_text": "Beskyttelse mod overopladning",
         "switchdescription_energy": "Bemærk, at de samlede energidata nulstilles og ikke kan gendannes igen.",
         "switchinching_overview_description_text": "Til at slukke enheden automatisk efter et stykke tid.",
-        "switchmodule_switch1description": "Switch 1 description",
-        "switchmodule_switch1title": "Switch 1",
-        "switchmodule_switch2title": "Switch 2",
-        "switchmodule_switchdescription": "Switch description",
-        "switchmodule_switchtitle": "Switch",
-        "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_switch1description": "Beskrivelse af kontakt 1",
+        "switchmodule_switch1title": "Kontakt 1",
+        "switchmodule_switch2title": "Kontakt 2",
+        "switchmodule_switchdescription": "Beskrivelse af kontakten",
+        "switchmodule_switchtitle": "Kontakt",
+        "switchmodule_typesetting": "Kontaktens tilstand",
+        "switchmodule_typesetting1": "Vip for at skifte kontaktens tilstand",
+        "switchmodule_typesetting2": "Synkroniseret med den aktuelle kontaktstatus",
+        "switchmodule_typesetting3": "Nulstil til den nye tilstand",
+        "switchmodule_typesettingdescription": "For at konfigurere indstillingen for kontaktens tilstand",
         "switchonlyonce": "Det er kun tilladt at skifte tilstand én gang om dagen.",
         "switchtitle_energyconsumption": "Vil du virkelig skifte til energiforbrug?",
         "switchtitle_energygeneration": "Vil du virkelig skifte til energiproduktion?",
@@ -5232,7 +5397,7 @@ export default {
         "thermostat_vacationplan": "Ferieplan",
         "thermostat_warm": "Behageligt",
         "third_irrigation": "Tredje kunstvanding",
-        "time_format": "Time format",
+        "time_format": "Tidsformat",
         "time_unit_h": "h",
         "timer_ceiling_fan_headline_text": "Timer",
         "timer_ceiling_fan_lighting_switched_off_text": "Lyset slukker om {0}",
@@ -5247,12 +5412,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Plug/stikdåse1 slukker om {0}",
         "timer_powerstrip_socket1_switched_on_text": "Plug/stikdåse 1 tænder om {0}",
         "timer_sockets_button_text": "Begynd",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Kontakt 1 slukkes ca.{0}",
+        "timer_switch1_active_timer_field_description_on_text": "Kontakt 1 tændes ca. {0}",
+        "timer_switch2_active_timer_field_description_off_text": "Kontakt 2 slukkes ca.{0}",
+        "timer_switch2_active_timer_field_description_on_text": "Kontakt 2 tændes ca. {0}",
+        "timer_switch_active_timer_field_description_off_text": "Kontakten slukkes ca.{0}",
+        "timer_switch_active_timer_field_description_on_text": "Kontakten tændes ca. kl. {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Almen belysning",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Hovedbelysning",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Lys",
@@ -5709,7 +5874,30 @@ export default {
         "country_scotland": "Schottland",
         "country_selection_textfield_headline_search": "Suchen",
         "country_sy": "Syrien",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Aktuelle Bodentemperatur und -feuchtigkeit",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Täglich",
         "date": "Datum",
         "date_type": "Datumstyp",
@@ -6225,12 +6413,18 @@ export default {
         "striplight_adaptbutton": "Anpassen",
         "striplight_lengthadaptationtext": "Wenn das Lichtband zugeschnitten wurde, kannst Du die Länge in der App anpassen.",
         "striplight_lengthtitle": "Länge des Lichtstreifens",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
+        "switch1_active_timer_field_small_off_text": "Schalter 1 aus in {0}",
+        "switch1_active_timer_field_small_on_text": "Schalter 1 auf {0}",
+        "switch2_active_timer_field_small_off_text": "Schalter 2 aus in {0}",
+        "switch2_active_timer_field_small_on_text": "Schalter 2 ein in {0}",
+        "switch_active_timer_field_small_off_text": "Ausschalten in {0}",
+        "switch_active_timer_field_small_on_text": "Einschalten in {0}",
+        "switch_interlock": "Verriegelung",
+        "switch_interlock_addbtn_text": "Verriegelung hinzufügen",
+        "switch_interlock_addtitle": "Eine neue Verriegelung hinzufügen",
+        "switch_interlock_delete_popup_topic": "Möchtest Du die Verriegelung wirklich löschen?",
+        "switch_interlock_editbtn_text": "Verriegelung löschen",
+        "switch_interlock_edittitle": "Bearbeiten der Verriegelung",
         "switch_interlockingdescription": "Um die Bedienung jeweils nur eines Schalters zu ermöglichen",
         "switch_overcharge_headline_description": "Die Funktion schaltet das Aufladen Deiner mobilen Geräte, einschließlich Mobiltelefone und Powerbanks, automatisch aus, wenn sie vollständig aufgeladen sind, um ein Überladen zu verhindern und die Akkulaufzeit zu verlängern.",
         "switch_overcharge_headline_text": "Überladeschutz",
@@ -6241,7 +6435,11 @@ export default {
         "switchmodule_switch2title": "Schalter 2",
         "switchmodule_switchdescription": "Beschreibung des Switches",
         "switchmodule_switchtitle": "Schalter",
+        "switchmodule_typesetting": "Zustand des Schalters",
+        "switchmodule_typesetting1": "Umdrehen, um den Schalterzustand zu ändern",
+        "switchmodule_typesetting2": "Synchron zum aktuellen Schaltzustand",
         "switchmodule_typesetting3": "Auf den neuen Zustand zurücksetzen",
+        "switchmodule_typesettingdescription": "So konfigurierst du die Einstellung für den Schaltzustand",
         "switchonlyonce": "Der Wechsel des Modus ist nur einmal pro Tag erlaubt.",
         "switchtitle_energyconsumption": "Willst Du wirklich auf Energieverbrauch umsteigen?",
         "switchtitle_energygeneration": "Willst Du wirklich auf Energieerzeugung umsteigen?",
@@ -6306,12 +6504,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Steckdose1 wird um etwa {0} ausgeschaltet",
         "timer_powerstrip_socket1_switched_on_text": "Steckdose1 wird um etwa {0} eingeschaltet",
         "timer_sockets_button_text": "Starten",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Schalter 1 wird bei etwa {0} ausgeschaltet.",
+        "timer_switch1_active_timer_field_description_on_text": "Schalter 1 wird etwa um {0} eingeschaltet.",
+        "timer_switch2_active_timer_field_description_off_text": "Schalter 2 wird bei etwa {0} ausgeschaltet",
+        "timer_switch2_active_timer_field_description_on_text": "Schalter 2 wird etwa um {0} eingeschaltet.",
+        "timer_switch_active_timer_field_description_off_text": "Der Schalter wird bei etwa {0} ausgeschaltet",
+        "timer_switch_active_timer_field_description_on_text": "Der Schalter wird auf etwa {0} eingeschaltet.",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Sekundärbeleuchtung",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Hauptbeleuchtung",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Licht",
@@ -6768,7 +6966,30 @@ export default {
         "country_scotland": "Σκωτία",
         "country_selection_textfield_headline_search": "Αναζήτηση",
         "country_sy": "Συρία",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Τρέχουσα θερμοκρασία και υγρασία εδάφους",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Καθημερινά",
         "date": "Ημερομηνία",
         "date_type": "Τύπος ημερομηνίας",
@@ -7108,10 +7329,10 @@ export default {
         "power_strip_feature_2_socket_2_text_min_on": "Ενεργοποίηση πρίζας 2 σε {0} min",
         "power_strip_feature_2_socket_3_text_min_off": "Απενεργοποίηση πρίζας 3 σε {0} min",
         "power_strip_feature_2_socket_3_text_min_on": "Ενεργοποίηση πρίζας 3 σε {0} min",
-        "power_strip_feature_2_socket_4_text_min_off": "Socket 4 will be switched off in {0} ",
-        "power_strip_feature_2_socket_4_text_min_on": "Socket 4 will be switched on in {0}",
-        "power_strip_feature_2_socket_5_text_min_off": "Socket 5 will be switched off in {0}",
-        "power_strip_feature_2_socket_5_text_min_on": "Socket 5 will be switched on in {0}",
+        "power_strip_feature_2_socket_4_text_min_off": "Η πρίζα 4 θα απενεργοποιηθεί σε {0} ",
+        "power_strip_feature_2_socket_4_text_min_on": "Η πρίζα 4 θα ενεργοποιηθεί σε {0}",
+        "power_strip_feature_2_socket_5_text_min_off": "Η πρίζα 5 θα απενεργοποιηθεί σε {0}",
+        "power_strip_feature_2_socket_5_text_min_on": "Η πρίζα 5 θα ενεργοποιηθεί σε {0}",
         "power_strip_feature_2_socket_usb_text_min_off": "Απενεργοποίηση πρίζας USB σε {0} min",
         "power_strip_feature_2_socket_usb_text_min_on": "Ενεργοποίηση πρίζας USB σε {0} min",
         "power_strip_specific_settings_desc_socket_1": "Πρίζα 1 περιγραφή",
@@ -7121,8 +7342,8 @@ export default {
         "power_strip_tile_socket_1_headline": "Πρίζα 1",
         "power_strip_tile_socket_2_headline": "Πρίζα 2",
         "power_strip_tile_socket_3_headline": "Πρίζα 3",
-        "power_strip_tile_socket_4_headline": "Socket 4",
-        "power_strip_tile_socket_5_headline": "Socket 5",
+        "power_strip_tile_socket_4_headline": "Πρίζα 4",
+        "power_strip_tile_socket_5_headline": "Πρίζα 5",
         "power_strip_tile_socket_usb_headline": "Πρίζα USB",
         "privatemode_description": "Για να κλείσετε τα κανάλια μετάδοσης ήχου και βίντεο για την κάμερα για την προστασία του απορρήτου των χρηστών όταν βρίσκονται στο σπίτι.",
         "push_notifications_contact_sensor_door_closing_title": "Υπενθύμιση κλεισίματος",
@@ -7165,16 +7386,16 @@ export default {
         "smoke_alerteffect": "Ανιχνεύθηκε καπνός",
         "smoke_alertfree": "Δεν ανιχνεύθηκε καπνός",
         "smoke_equipmentselftest": "Αυτοέλεγχος εξοπλισμού",
-        "socket1_active_timer_field_small_off_text": "Socket 1 off in {0}",
-        "socket1_active_timer_field_small_on_text": "Socket 1 on in {0}",
-        "socket2_active_timer_field_small_off_text": "Socket 2 off in {0}",
-        "socket2_active_timer_field_small_on_text": "Socket 2 on in {0}",
-        "socket3_active_timer_field_small_off_text": "Socket 3 off in {0}",
-        "socket3_active_timer_field_small_on_text": "Socket 3 on in {0}",
-        "socket4_active_timer_field_small_off_text": "Socket 4 off in {0}",
-        "socket4_active_timer_field_small_on_text": "Socket 4 on in {0}",
-        "socket5_active_timer_field_small_off_text": "Socket 5 off in {0}",
-        "socket5_active_timer_field_small_on_text": "Socket 5 on in {0}",
+        "socket1_active_timer_field_small_off_text": "Πρίζα 1 απενεργοποιείται σε {0}",
+        "socket1_active_timer_field_small_on_text": "Πρίζα 1 ενεργοποιείται σε {0}",
+        "socket2_active_timer_field_small_off_text": "Πρίζα 2 απενεργοποιείται σε {0}",
+        "socket2_active_timer_field_small_on_text": "Πρίζα 2 ενεργοποιείται σε {0}",
+        "socket3_active_timer_field_small_off_text": "Πρίζα 3 απενεργοποιείται σε {0}",
+        "socket3_active_timer_field_small_on_text": "Πρίζα 3 ενεργοποιείται σε {0}",
+        "socket4_active_timer_field_small_off_text": "Πρίζα 4 απενεργοποιείται σε {0}",
+        "socket4_active_timer_field_small_on_text": "Πρίζα 4 ενεργοποιείται σε {0}",
+        "socket5_active_timer_field_small_off_text": "Πρίζα 5 απενεργοποιείται σε {0}",
+        "socket5_active_timer_field_small_on_text": "Πρίζα 5 ενεργοποιείται σε {0}",
         "socket_settings_firstbox_status1_description": "Η συσκευή παραμένει απενεργοποιημένη",
         "socket_settings_firstbox_status2_description": "Η συσκευή παραμένει ενεργοποιημένη",
         "socket_settings_firstbox_status3_description": "Επιστροφή στην προηγούμενη κατάσταση πριν από την απενεργοποίηση της τροφοδοσίας",
@@ -7191,8 +7412,8 @@ export default {
         "sockets_specific_settings_relay_status": "Κατάσταση κατά την ενεργοποίηση",
         "sockets_specific_settings_relay_status_remember": "Απομνημόνευση τελευταίας κατάστασης",
         "sockets_specific_settings_switch_inching": "Αυτόματη απενεργοποίηση ",
-        "socketusb_active_timer_field_small_off_text": "USB off in {0}",
-        "socketusb_active_timer_field_small_on_text": "USB on in {0}",
+        "socketusb_active_timer_field_small_off_text": "Απενεργοποίηση USB σε {0}",
+        "socketusb_active_timer_field_small_on_text": "Το USB ενεργοποιείται σε {0}",
         "software_update_found_failed_update_error_5012": "Η συσκευή είναι εκτός σύνδεσης.",
         "solar_bt_pp_battery_headline": "Μπαταρία",
         "solar_bt_pp_field_dm": "Δυναμική Διάθεση",
@@ -7284,23 +7505,33 @@ export default {
         "striplight_adaptbutton": "Προσαρμογή",
         "striplight_lengthadaptationtext": "Εάν το φως της λωρίδας έχει κοπεί, τότε μπορείτε να προσαρμόσετε το μήκος στην εφαρμογή για να το προσαρμόσετε.",
         "striplight_lengthtitle": "Μήκος strip Light",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "To allow operation of only one switch at a time",
+        "switch1_active_timer_field_small_off_text": "Απενεργοποίηση διακόπτη 1 σε {0}",
+        "switch1_active_timer_field_small_on_text": "Ενεργοποίηση διακόπτη 1 σε {0}",
+        "switch2_active_timer_field_small_off_text": "Απενεργοποίηση διακόπτη 2 σε {0}",
+        "switch2_active_timer_field_small_on_text": "Ενεργοποίηση διακόπτη 2 σε {0}",
+        "switch_active_timer_field_small_off_text": "Απενεργοποίηση σε {0}",
+        "switch_active_timer_field_small_on_text": "Ενεργοποίηση διακόπτη σε {0}",
+        "switch_interlock": "Αλληλοσύνδεση",
+        "switch_interlock_addbtn_text": "Προσθήκη διασύνδεσης",
+        "switch_interlock_addtitle": "Προσθήκη νέας διασύνδεσης",
+        "switch_interlock_delete_popup_topic": "Θέλετε πραγματικά να διαγράψετε την αλληλοσύνδεση;",
+        "switch_interlock_editbtn_text": "Διαγραφή αλληλοσύνδεσης",
+        "switch_interlock_edittitle": "Επεξεργασία της αλληλοσύνδεσης",
+        "switch_interlockingdescription": "Για να επιτρέψετε τη λειτουργία μόνο ενός διακόπτη κάθε φορά",
         "switch_overcharge_headline_description": "Η λειτουργία απενεργοποιεί αυτόματα τη φόρτιση των κινητών συσκευών σας, συμπεριλαμβανομένων των κινητών τηλεφώνων και των τροφοδοτικών τραπεζών, όταν είναι πλήρως φορτισμένες για να αποφευχθεί η υπερφόρτιση και να παραταθεί η διάρκεια ζωής της μπαταρίας.",
         "switch_overcharge_headline_text": "Προστασία υπερφόρτισης",
         "switchdescription_energy": "Σημειώστε ότι τα συνολικά δεδομένα ενέργειας θα επαναφερθούν και δεν μπορούν να ανακτηθούν ξανά.",
         "switchinching_overview_description_text": "Για να απενεργοποιήσετε αυτόματα τη συσκευή μετά από ένα χρονικό διάστημα.",
-        "switchmodule_switch1description": "Switch 1 description",
-        "switchmodule_switch1title": "Switch 1",
-        "switchmodule_switch2title": "Switch 2",
-        "switchmodule_switchdescription": "Switch description",
+        "switchmodule_switch1description": "Περιγραφή διακόπτη 1",
+        "switchmodule_switch1title": "Διακόπτης 1",
+        "switchmodule_switch2title": "Διακόπτης 2",
+        "switchmodule_switchdescription": "Περιγραφή διακόπτη",
         "switchmodule_switchtitle": "Switch",
-        "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesetting": "Κατάσταση διακόπτη",
+        "switchmodule_typesetting1": "Αναποδογυρίστε για να αλλάξετε την κατάσταση του διακόπτη",
+        "switchmodule_typesetting2": "Συγχρονισμένη με την τρέχουσα κατάσταση διακόπτη",
+        "switchmodule_typesetting3": "Επαναφορά στη νέα κατάσταση",
+        "switchmodule_typesettingdescription": "Για να διαμορφώσετε τη ρύθμιση κατάστασης διακόπτη",
         "switchonlyonce": "Η εναλλαγή της λειτουργίας επιτρέπεται μόνο μία φορά την ημέρα.",
         "switchtitle_energyconsumption": "Θέλετε πραγματικά να μεταβείτε στην κατανάλωση ενέργειας;",
         "switchtitle_energygeneration": "Θέλετε πραγματικά να στραφείτε στην παραγωγή ενέργειας;",
@@ -7350,7 +7581,7 @@ export default {
         "thermostat_vacationplan": "Σχέδιο διακοπών",
         "thermostat_warm": "Comfort",
         "third_irrigation": "Τρίτη άρδευση",
-        "time_format": "Time format",
+        "time_format": "Μορφή ώρας",
         "time_unit_h": "h",
         "timer_ceiling_fan_headline_text": "Χρονοδιακόπτης",
         "timer_ceiling_fan_lighting_switched_off_text": "Ο φωτισμός θα απενεργοποιηθεί περίπου στις {0}",
@@ -7365,12 +7596,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Η πρίζα 1 θα απενεργοποιηθεί περίπου στις {0}",
         "timer_powerstrip_socket1_switched_on_text": "Η πρίζα 1 θα ενεργοποιηθεί περίπου σε {0}",
         "timer_sockets_button_text": "Έναρξη",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Ο διακόπτης 1 θα απενεργοποιηθεί περίπου στις {0}",
+        "timer_switch1_active_timer_field_description_on_text": "Ο διακόπτης 1 θα ενεργοποιηθεί περίπου στις {0}",
+        "timer_switch2_active_timer_field_description_off_text": "Ο διακόπτης 2 θα απενεργοποιηθεί περίπου στις {0}",
+        "timer_switch2_active_timer_field_description_on_text": "Ο διακόπτης 2 θα ενεργοποιηθεί περίπου στις {0}",
+        "timer_switch_active_timer_field_description_off_text": "Ο διακόπτης θα απενεργοποιηθεί περίπου στις {0}",
+        "timer_switch_active_timer_field_description_on_text": "Ο διακόπτης θα ενεργοποιηθεί περίπου στις {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Δευτερεύων φωτισμός",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Κύριος φωτισμός",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Φωτισμός",
@@ -7827,7 +8058,30 @@ export default {
         "country_scotland": "Escocia",
         "country_selection_textfield_headline_search": "Búsqueda",
         "country_sy": "Siria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Temperatura y humedad actuales del suelo",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Diariamente",
         "date": "Fecha",
         "date_type": "Tipo de fecha",
@@ -8343,6 +8597,12 @@ export default {
         "striplight_adaptbutton": "Adaptar",
         "striplight_lengthadaptationtext": "Si la tira ha sido cortada, puedes ajustar la longitud en la aplicación para adaptarla.",
         "striplight_lengthtitle": "Longitud de la tira",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -8359,7 +8619,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Cambiar de modo sólo está permitido una vez al día.",
         "switchtitle_energyconsumption": "¿De verdad quieres pasar al consumo de energía?",
         "switchtitle_energygeneration": "¿De verdad quieres cambiar a la generación de energía?",
@@ -8886,7 +9150,30 @@ export default {
         "country_scotland": "Šotimaa",
         "country_selection_textfield_headline_search": "Otsing",
         "country_sy": "Süüria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Praegune pinnase temperatuur ja niiskus",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Igapäevane",
         "date": "Kuupäev",
         "date_type": "Kuupäeva tüüp",
@@ -9226,10 +9513,10 @@ export default {
         "power_strip_feature_2_socket_2_text_min_on": "Pistikupesa 2 sisselülitus {0} min pärast",
         "power_strip_feature_2_socket_3_text_min_off": "Pistikupesa 3 väljalülitus {0} min pärast",
         "power_strip_feature_2_socket_3_text_min_on": "Pistikupesa 3 sisselülitus {0} min pärast",
-        "power_strip_feature_2_socket_4_text_min_off": "Socket 4 will be switched off in {0} ",
-        "power_strip_feature_2_socket_4_text_min_on": "Socket 4 will be switched on in {0}",
-        "power_strip_feature_2_socket_5_text_min_off": "Socket 5 will be switched off in {0}",
-        "power_strip_feature_2_socket_5_text_min_on": "Socket 5 will be switched on in {0}",
+        "power_strip_feature_2_socket_4_text_min_off": "Pistikupesa 4 lülitatakse välja {0} ",
+        "power_strip_feature_2_socket_4_text_min_on": "Pistikupesa 4 lülitatakse sisse {0}",
+        "power_strip_feature_2_socket_5_text_min_off": "Pistikupesa 5 lülitatakse välja {0}",
+        "power_strip_feature_2_socket_5_text_min_on": "Pistikupesa 5 lülitatakse sisse {0}",
         "power_strip_feature_2_socket_usb_text_min_off": "USB-pesa väljalülitus {0} min pärast",
         "power_strip_feature_2_socket_usb_text_min_on": "USB-pesa sisselülitus {0} min pärast",
         "power_strip_specific_settings_desc_socket_1": "Pistikupesa 1 kirjeldus",
@@ -9240,7 +9527,7 @@ export default {
         "power_strip_tile_socket_2_headline": "Pistikupesa 2",
         "power_strip_tile_socket_3_headline": "Pistikupesa 3",
         "power_strip_tile_socket_4_headline": "Pistikupesa 4",
-        "power_strip_tile_socket_5_headline": "Socket 5",
+        "power_strip_tile_socket_5_headline": "Pistikupesa 5",
         "power_strip_tile_socket_usb_headline": "USB-pesa",
         "privatemode_description": "Kaamera heli- ja videoülekandekanalite sulgemine, et kaitsta kasutajate privaatsust, kui nad on kodus.",
         "push_notifications_contact_sensor_door_closing_title": "Sulgemise meeldetuletus",
@@ -9283,16 +9570,16 @@ export default {
         "smoke_alerteffect": "Suits tuvastatud",
         "smoke_alertfree": "Suitsu ei tuvastatud",
         "smoke_equipmentselftest": "Seadmete enesekontroll",
-        "socket1_active_timer_field_small_off_text": "Socket 1 off in {0}",
-        "socket1_active_timer_field_small_on_text": "Socket 1 on in {0}",
-        "socket2_active_timer_field_small_off_text": "Socket 2 off in {0}",
-        "socket2_active_timer_field_small_on_text": "Socket 2 on in {0}",
-        "socket3_active_timer_field_small_off_text": "Socket 3 off in {0}",
-        "socket3_active_timer_field_small_on_text": "Socket 3 on in {0}",
-        "socket4_active_timer_field_small_off_text": "Socket 4 off in {0}",
-        "socket4_active_timer_field_small_on_text": "Socket 4 on in {0}",
-        "socket5_active_timer_field_small_off_text": "Socket 5 off in {0}",
-        "socket5_active_timer_field_small_on_text": "Socket 5 on in {0}",
+        "socket1_active_timer_field_small_off_text": "Pistikupesa 1 välja lülitatud {0}",
+        "socket1_active_timer_field_small_on_text": "Pistikupesa 1 sisse lülitatud {0}",
+        "socket2_active_timer_field_small_off_text": "Pistikupesa 2 välja lülitatud {0}",
+        "socket2_active_timer_field_small_on_text": "Pistikupesa 2 sisse lülitatud {0}",
+        "socket3_active_timer_field_small_off_text": "Pistikupesa 3 välja lülitatud {0}",
+        "socket3_active_timer_field_small_on_text": "Pistikupesa 3 sisse lülitatud {0}",
+        "socket4_active_timer_field_small_off_text": "Pistikupesa 4 välja lülitatud {0}",
+        "socket4_active_timer_field_small_on_text": "Pistikupesa 4 sisse lülitatud {0}",
+        "socket5_active_timer_field_small_off_text": "Pistikupesa 5 välja lülitatud {0}",
+        "socket5_active_timer_field_small_on_text": "Pistikupesa 5 sisse lülitatud {0}",
         "socket_settings_firstbox_status1_description": "Seade jääb väljalülitatuks",
         "socket_settings_firstbox_status2_description": "Seade jääb sisselülitatuks",
         "socket_settings_firstbox_status3_description": "Pöördu tagasi eelmisesse olekusse (olekusse enne seda, kui toide välja lülitati)",
@@ -9309,8 +9596,8 @@ export default {
         "sockets_specific_settings_relay_status": "Käitumine sisselülitamisel",
         "sockets_specific_settings_relay_status_remember": "Jäta viimane olek meelde",
         "sockets_specific_settings_switch_inching": "Automaatne väljalülitamine ",
-        "socketusb_active_timer_field_small_off_text": "USB off in {0}",
-        "socketusb_active_timer_field_small_on_text": "USB on in {0}",
+        "socketusb_active_timer_field_small_off_text": "USB väljalülitamine {0}",
+        "socketusb_active_timer_field_small_on_text": "USB sisse lülitatud {0}",
         "software_update_found_failed_update_error_5012": "Seadmel puudub võrguühendus.",
         "solar_bt_pp_battery_headline": "Aku",
         "solar_bt_pp_field_dm": "Dünaamiline meeleoluvalgustus",
@@ -9402,23 +9689,33 @@ export default {
         "striplight_adaptbutton": "Kohaneda",
         "striplight_lengthadaptationtext": "Kui ribavalgus on lõigatud, saate selle kohandamiseks rakenduses pikkust reguleerida.",
         "striplight_lengthtitle": "Riba valguse pikkus",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "To allow operation of only one switch at a time",
+        "switch1_active_timer_field_small_off_text": "Lülitage 1 välja {0}",
+        "switch1_active_timer_field_small_on_text": "Lülitage 1 sisse {0}",
+        "switch2_active_timer_field_small_off_text": "Lülitage 2 välja {0}",
+        "switch2_active_timer_field_small_on_text": "Lülitage 2 sisse {0}",
+        "switch_active_timer_field_small_off_text": "Lülitage välja{0}",
+        "switch_active_timer_field_small_on_text": "Lülitage sisse {0}",
+        "switch_interlock": "Blokeeruv",
+        "switch_interlock_addbtn_text": "Lisa blokeering",
+        "switch_interlock_addtitle": "Lisa uus blokeering",
+        "switch_interlock_delete_popup_topic": "Kas soovite tõesti blokeeringu kustutada?",
+        "switch_interlock_editbtn_text": "Kustuta blokeering",
+        "switch_interlock_edittitle": "Muutke blokeeringut",
+        "switch_interlockingdescription": "Ainult ühe lüliti korraga kasutamise lubamine",
         "switch_overcharge_headline_description": "See funktsioon lülitab juba täis laetud mobiilseadmete, sh mobiiltelefonide ja akupankade laadimise automaatselt välja, et vältida ülelaadimist ja pikendada akude tööiga.",
         "switch_overcharge_headline_text": "Ülelaadimiskaitse",
         "switchdescription_energy": "Pange tähele, et koguenergia andmed nullib ja neid ei saa uuesti taastada.",
         "switchinching_overview_description_text": "Seadme automaatseks väljalülitamiseks teatud aja möödudes.",
-        "switchmodule_switch1description": "Switch 1 description",
-        "switchmodule_switch1title": "Switch 1",
-        "switchmodule_switch2title": "Switch 2",
-        "switchmodule_switchdescription": "Switch description",
-        "switchmodule_switchtitle": "Switch",
-        "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_switch1description": "Lüliti 1 kirjeldus",
+        "switchmodule_switch1title": "Lüliti 1",
+        "switchmodule_switch2title": "Lüliti 2",
+        "switchmodule_switchdescription": "Lüliti kirjeldus",
+        "switchmodule_switchtitle": "Lüliti",
+        "switchmodule_typesetting": "Lüliti olek",
+        "switchmodule_typesetting1": "Lüliti oleku muutmiseks pöörake",
+        "switchmodule_typesetting2": "Sünkroonis praeguse lüliti olekuga",
+        "switchmodule_typesetting3": "Lähtesta uuele olekule",
+        "switchmodule_typesettingdescription": "Lüliti oleku sätte konfigureerimine",
         "switchonlyonce": "Režiimi vahetamine on lubatud ainult üks kord päevas.",
         "switchtitle_energyconsumption": "Kas sa tõesti tahad energiatarbimisele üle minna?",
         "switchtitle_energygeneration": "Kas te tõesti soovite minna üle energiatootmisele?",
@@ -9468,7 +9765,7 @@ export default {
         "thermostat_vacationplan": "Puhkuseplaan",
         "thermostat_warm": "Mugavus",
         "third_irrigation": "Kolmas niisutamine",
-        "time_format": "Time format",
+        "time_format": "Ajavorming",
         "time_unit_h": "h",
         "timer_ceiling_fan_headline_text": "Taimer",
         "timer_ceiling_fan_lighting_switched_off_text": "Valgustus lülitatakse välja umbes {0}",
@@ -9483,12 +9780,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Pistikupesa1 lülitatakse välja umbes {0}",
         "timer_powerstrip_socket1_switched_on_text": "Pistikupesa1 lülitatakse sisse umbes {0}",
         "timer_sockets_button_text": "Alusta",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Lüliti 1 lülitatakse umbes välja {0}",
+        "timer_switch1_active_timer_field_description_on_text": "Lüliti 1 lülitatakse sisse umbes {0}",
+        "timer_switch2_active_timer_field_description_off_text": "Lüliti 2 lülitatakse umbes välja {0}",
+        "timer_switch2_active_timer_field_description_on_text": "Lüliti 2 lülitatakse sisse umbes {0}",
+        "timer_switch_active_timer_field_description_off_text": "Lüliti lülitatakse välja umbes {0}",
+        "timer_switch_active_timer_field_description_on_text": "Lüliti lülitatakse sisse umbes {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Lisavalgustus",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Põhivalgustus",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Valgustus",
@@ -9945,7 +10242,30 @@ export default {
         "country_scotland": "Skotlanti",
         "country_selection_textfield_headline_search": "Haku",
         "country_sy": "Syyria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Nykyinen maaperän lämpötila ja kosteus",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Päivittäin",
         "date": "Pvm",
         "date_type": "Päivämäärän tyyppi",
@@ -10285,10 +10605,10 @@ export default {
         "power_strip_feature_2_socket_2_text_min_on": "Pistorasia 2 kytkeytyy päälle {0} min. kuluttua",
         "power_strip_feature_2_socket_3_text_min_off": "Pistorasia 3 kytkeytyy pois päältä {0} min. kuluttua",
         "power_strip_feature_2_socket_3_text_min_on": "Pistorasia 3 kytkeytyy päälle {0} min. kuluttua",
-        "power_strip_feature_2_socket_4_text_min_off": "Socket 4 will be switched off in {0} ",
-        "power_strip_feature_2_socket_4_text_min_on": "Socket 4 will be switched on in {0}",
-        "power_strip_feature_2_socket_5_text_min_off": "Socket 5 will be switched off in {0}",
-        "power_strip_feature_2_socket_5_text_min_on": "Socket 5 will be switched on in {0}",
+        "power_strip_feature_2_socket_4_text_min_off": "Pistorasia 4 kytkeytyy pois päältä {0} min. kuluttua",
+        "power_strip_feature_2_socket_4_text_min_on": "Pistorasia 4 kytkeytyy päälle {0} min. kuluttua",
+        "power_strip_feature_2_socket_5_text_min_off": "Pistorasia 5 kytkeytyy pois päältä {0} min. kuluttua",
+        "power_strip_feature_2_socket_5_text_min_on": "Pistorasia 5 kytkeytyy päälle {0} min. kuluttua",
         "power_strip_feature_2_socket_usb_text_min_off": "USB-liitäntä pois päältä {0} min. kuluttua",
         "power_strip_feature_2_socket_usb_text_min_on": "USB-liitäntä päälle {0} min. kuluttua",
         "power_strip_specific_settings_desc_socket_1": "Pistorasia 1 Kuvaus",
@@ -10298,8 +10618,8 @@ export default {
         "power_strip_tile_socket_1_headline": "Pistorasia 1",
         "power_strip_tile_socket_2_headline": "Pistorasia 2",
         "power_strip_tile_socket_3_headline": "Pistorasia 3",
-        "power_strip_tile_socket_4_headline": "Socket 4",
-        "power_strip_tile_socket_5_headline": "Socket 5",
+        "power_strip_tile_socket_4_headline": "Pistorasia 4",
+        "power_strip_tile_socket_5_headline": "Pistorasia 5",
         "power_strip_tile_socket_usb_headline": "USB-liitäntä",
         "privatemode_description": "Sulje kameran ääni- ja videonsiirtokanavat käyttäjien yksityisyyden suojaamiseksi, kun he ovat kotona.",
         "push_notifications_contact_sensor_door_closing_title": "Sulkemismuistutus",
@@ -10342,16 +10662,16 @@ export default {
         "smoke_alerteffect": "Savua havaittu",
         "smoke_alertfree": "Savua ei havaittu",
         "smoke_equipmentselftest": "Laitteen itsetestaus",
-        "socket1_active_timer_field_small_off_text": "Socket 1 off in {0}",
-        "socket1_active_timer_field_small_on_text": "Socket 1 on in {0}",
-        "socket2_active_timer_field_small_off_text": "Socket 2 off in {0}",
-        "socket2_active_timer_field_small_on_text": "Socket 2 on in {0}",
-        "socket3_active_timer_field_small_off_text": "Socket 3 off in {0}",
-        "socket3_active_timer_field_small_on_text": "Socket 3 on in {0}",
-        "socket4_active_timer_field_small_off_text": "Socket 4 off in {0}",
-        "socket4_active_timer_field_small_on_text": "Socket 4 on in {0}",
-        "socket5_active_timer_field_small_off_text": "Socket 5 off in {0}",
-        "socket5_active_timer_field_small_on_text": "Socket 5 on in {0}",
+        "socket1_active_timer_field_small_off_text": "Pistoke 1 pois päältä {0}",
+        "socket1_active_timer_field_small_on_text": "Liitäntä 1 päällä {0}",
+        "socket2_active_timer_field_small_off_text": "Pistoke 2 pois päältä {0}",
+        "socket2_active_timer_field_small_on_text": "Pistorasia 2 päällä {0}",
+        "socket3_active_timer_field_small_off_text": "Pistorasia 3 pois päältä {0}",
+        "socket3_active_timer_field_small_on_text": "Pistorasia 3 päällä {0}",
+        "socket4_active_timer_field_small_off_text": "Pistorasia 4 pois päältä {0}",
+        "socket4_active_timer_field_small_on_text": "Pistorasia 4 päällä {0}",
+        "socket5_active_timer_field_small_off_text": "Pistorasia 5 pois päältä {0}",
+        "socket5_active_timer_field_small_on_text": "Pistorasia 5 päällä {0}",
         "socket_settings_firstbox_status1_description": "Laite pysyy sammutettuna",
         "socket_settings_firstbox_status2_description": "Laite pysyy päällä",
         "socket_settings_firstbox_status3_description": "Palaa edelliseen tilaan ennen virran katkaisua",
@@ -10368,8 +10688,8 @@ export default {
         "sockets_specific_settings_relay_status": "Power on -tila",
         "sockets_specific_settings_relay_status_remember": "Muista viimeinen tila",
         "sockets_specific_settings_switch_inching": "Automaattinen sammutus ",
-        "socketusb_active_timer_field_small_off_text": "USB off in {0}",
-        "socketusb_active_timer_field_small_on_text": "USB on in {0}",
+        "socketusb_active_timer_field_small_off_text": "USB pois päältä {0}",
+        "socketusb_active_timer_field_small_on_text": "USB päällä {0}",
         "software_update_found_failed_update_error_5012": "Laite on offline-tilassa.",
         "solar_bt_pp_battery_headline": "Akku",
         "solar_bt_pp_field_dm": "Vaihtuva tunnelma",
@@ -10461,23 +10781,33 @@ export default {
         "striplight_adaptbutton": "Sopeutua",
         "striplight_lengthadaptationtext": "Jos nauhavalo on leikattu, voit säätää pituutta sovelluksessa sen mukauttamiseksi.",
         "striplight_lengthtitle": "Nauhan valon pituus",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "To allow operation of only one switch at a time",
+        "switch1_active_timer_field_small_off_text": "Kytkin 1 kytkeytyy pois päältä {0}",
+        "switch1_active_timer_field_small_on_text": "Kytkin 1 kytkeytyy päälle {0}",
+        "switch2_active_timer_field_small_off_text": "Kytkin 2 kytkeytyy pois päältä {0}",
+        "switch2_active_timer_field_small_on_text": "Kytkin 2 kytkeytyy päälle {0}",
+        "switch_active_timer_field_small_off_text": "Kytkeytyy pois päältä {0}.",
+        "switch_active_timer_field_small_on_text": "Kytkeytyy päälle {0}",
+        "switch_interlock": "Lukitus",
+        "switch_interlock_addbtn_text": "Lisää lukitus",
+        "switch_interlock_addtitle": "Lisää uusi lukitus",
+        "switch_interlock_delete_popup_topic": "Haluatko todella poistaa lukituksen?",
+        "switch_interlock_editbtn_text": "Poista lukitus",
+        "switch_interlock_edittitle": "Muokkaa lukitusta",
+        "switch_interlockingdescription": "Salli vain yhden kytkimen käyttö kerrallaan",
         "switch_overcharge_headline_description": "Ominaisuus sammuttaa automaattisesti mobiililaitteiden, kuten matkapuhelinten ja virtapankkien, lataamisen, kun ne on ladattu täyteen, jotta estetään ylikuormitus ja pidennetään akun käyttöikää.",
         "switch_overcharge_headline_text": "Ylilataussuoja",
         "switchdescription_energy": "Huomaa, että kokonaisenergiatiedot nollataan eikä niitä voida palauttaa uudelleen.",
         "switchinching_overview_description_text": "Laitteen automaattinen sammuttaminen tietyn ajan kuluttua.",
-        "switchmodule_switch1description": "Switch 1 description",
-        "switchmodule_switch1title": "Switch 1",
-        "switchmodule_switch2title": "Switch 2",
-        "switchmodule_switchdescription": "Switch description",
-        "switchmodule_switchtitle": "Switch",
-        "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_switch1description": "Kytkin 1 kuvaus",
+        "switchmodule_switch1title": "Kytkin 1",
+        "switchmodule_switch2title": "Kytkin 2",
+        "switchmodule_switchdescription": "Kytkimen kuvaus",
+        "switchmodule_switchtitle": "Kytkin",
+        "switchmodule_typesetting": "Kytkimen tila",
+        "switchmodule_typesetting1": "Vaihda kytkimen tilaa kääntämällä",
+        "switchmodule_typesetting2": "Synkronoitu kytkimen nykyiseen tilaan",
+        "switchmodule_typesetting3": "Palauta uuteen tilaan",
+        "switchmodule_typesettingdescription": "Kytkimen tila-asetuksen määrittäminen",
         "switchonlyonce": "Tilan vaihtaminen on sallittua vain kerran päivässä.",
         "switchtitle_energyconsumption": "Haluatko todella siirtyä energiankulutukseen?",
         "switchtitle_energygeneration": "Haluatko todella siirtyä energiantuotantoon?",
@@ -10527,7 +10857,7 @@ export default {
         "thermostat_vacationplan": "Lomasuunnitelma",
         "thermostat_warm": "Lämmin",
         "third_irrigation": "Kolmas kastelu",
-        "time_format": "Time format",
+        "time_format": "Aikaformaatti",
         "time_unit_h": "h",
         "timer_ceiling_fan_headline_text": "Ajastin",
         "timer_ceiling_fan_lighting_switched_off_text": "Valaistus sammutetaan noin {0}",
@@ -10542,12 +10872,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Pistorasia1 kytketään pois päältä noin {0}",
         "timer_powerstrip_socket1_switched_on_text": "Pistorasia1 kytketään päälle noin {0}",
         "timer_sockets_button_text": "Aloita",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Kytkin 1 kytkeytyy pois päältä noin {0}",
+        "timer_switch1_active_timer_field_description_on_text": "Kytkin 1 kytkeytyy päälle noin {0}",
+        "timer_switch2_active_timer_field_description_off_text": "Kytkin 2 kytkeytyy pois päältä noin {0}",
+        "timer_switch2_active_timer_field_description_on_text": "Kytkin 2 kytkeytyy päälle noin {0}",
+        "timer_switch_active_timer_field_description_off_text": "Kytkin kytkeytyy pois päältä noin {0}",
+        "timer_switch_active_timer_field_description_on_text": "Kytkin kytkeytyy päälle noin {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Toissijainen valaistus",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Päävalaistus",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Valaistus",
@@ -11004,7 +11334,30 @@ export default {
         "country_scotland": "Écosse",
         "country_selection_textfield_headline_search": "Rechercher",
         "country_sy": "Syrie",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Température et humidité actuelles du sol",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Journalier",
         "date": "Date",
         "date_type": "Format de date",
@@ -11520,12 +11873,18 @@ export default {
         "striplight_adaptbutton": "Adapter",
         "striplight_lengthadaptationtext": "Si le ruban LED a été raccourci, vous pouvez ajuster sa longueur dans l'application pour adapter les animations.",
         "striplight_lengthtitle": "Longueur du ruban",
+        "switch1_active_timer_field_small_off_text": "Désactiver l'Interrupteur 1 dans {0}",
+        "switch1_active_timer_field_small_on_text": "Activer l'Interrupteur 1 dans {0}",
+        "switch2_active_timer_field_small_off_text": "Désactiver l'Interrupteur 2 dans {0}",
+        "switch2_active_timer_field_small_on_text": "Activer l'Interrupteur 2 dans {0}",
+        "switch_active_timer_field_small_off_text": "Désactiver dans {0}",
+        "switch_active_timer_field_small_on_text": "Activer dans {0}",
         "switch_interlock": "Verrouillage",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
+        "switch_interlock_addbtn_text": "Ajouter un verrouillage",
+        "switch_interlock_addtitle": "Ajouter un nouveau verrouillage",
+        "switch_interlock_delete_popup_topic": "Voulez-vous vraiment supprimer le verrouillage ?",
+        "switch_interlock_editbtn_text": "Supprimer le verrouillage",
+        "switch_interlock_edittitle": "Modifier le verrouillage",
         "switch_interlockingdescription": "Pour permettre le fonctionnement d’un seul interrupteur à la fois",
         "switch_overcharge_headline_description": "La fonction désactive automatiquement la recharge de vos appareils mobiles, y compris les téléphones portables et les batteries externes, lorsqu'ils sont complètement chargés afin d'éviter toute surcharge et prolonger la durée de vie de la batterie.",
         "switch_overcharge_headline_text": "Protection contre les surcharges",
@@ -11536,7 +11895,11 @@ export default {
         "switchmodule_switch2title": "Interrupteur 2",
         "switchmodule_switchdescription": "Description de l'interrupteur",
         "switchmodule_switchtitle": "Interrupteur",
+        "switchmodule_typesetting": "Mode de l'interrupteur",
+        "switchmodule_typesetting1": "Basculer pour modifier le mode de l'interrupteur",
+        "switchmodule_typesetting2": "Synchrone avec le mode actuel de l'interrupteur",
         "switchmodule_typesetting3": "Réinitialiser au nouvel état",
+        "switchmodule_typesettingdescription": "Définir le mode de l'interrupteur",
         "switchonlyonce": "Le changement de mode n'est possible qu'une fois par jour.",
         "switchtitle_energyconsumption": "Êtes-vous sûr de vouloir basculer en mode \"Consommation d'énergie\" ?",
         "switchtitle_energygeneration": "Êtes-vous sûr de vouloir basculer en mode \"Production d'énergie\" ?",
@@ -11601,12 +11964,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Désactivation de la Prise 1 vers {0}",
         "timer_powerstrip_socket1_switched_on_text": "Activation de la Prise 1 vers {0}",
         "timer_sockets_button_text": "Démarrer",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "L'Interrupteur 1 sera désactivé vers {0}",
+        "timer_switch1_active_timer_field_description_on_text": "L'Interrupteur 1 sera activé vers {0}",
+        "timer_switch2_active_timer_field_description_off_text": "L'Interrupteur 2 sera désactivé vers {0}",
+        "timer_switch2_active_timer_field_description_on_text": "L'Interrupteur 2 sera activé vers {0}",
+        "timer_switch_active_timer_field_description_off_text": "L'interrupteur sera désactivé vers {0}",
+        "timer_switch_active_timer_field_description_on_text": "L'interrupteur sera activé vers {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Éclairage secondaire",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Éclairage principal",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Éclairage",
@@ -12063,7 +12426,30 @@ export default {
         "country_scotland": "Škotska",
         "country_selection_textfield_headline_search": "Pretraži",
         "country_sy": "Sirija",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Trenutna temperatura i vlažnost tla",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Dnevno",
         "date": "Datum",
         "date_type": "Vrsta datuma",
@@ -12579,6 +12965,12 @@ export default {
         "striplight_adaptbutton": "Prilagoditi",
         "striplight_lengthadaptationtext": "Ako je svjetlo trake izrezano, duljinu možete prilagoditi u aplikaciji kako biste je prilagodili.",
         "striplight_lengthtitle": "Duljina svjetla trake",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -12595,7 +12987,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Prebacivanje načina rada dopušteno je samo jednom dnevno.",
         "switchtitle_energyconsumption": "Želite li se prebaciti na potrošnju energije?",
         "switchtitle_energygeneration": "Želite li se prebaciti na proizvodnju energije?",
@@ -13122,7 +13518,30 @@ export default {
         "country_scotland": "Skócia",
         "country_selection_textfield_headline_search": "Keresés",
         "country_sy": "Szíria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "A talaj jelenlegi hőmérséklete és páratartalma",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Napi",
         "date": "Dátum",
         "date_type": "Dátum típusa",
@@ -13638,6 +14057,12 @@ export default {
         "striplight_adaptbutton": "Alkalmazkodás",
         "striplight_lengthadaptationtext": "Ha a szalaglámpát levágták, akkor az alkalmazásban beállíthatja a hosszát az adaptáláshoz.",
         "striplight_lengthtitle": "Szalagfény hossza",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -13654,7 +14079,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Az üzemmódváltás naponta csak egyszer engedélyezett.",
         "switchtitle_energyconsumption": "Tényleg át akarsz állni az energiafogyasztásra?",
         "switchtitle_energygeneration": "Tényleg át akarsz állni energiatermelésre?",
@@ -14181,7 +14610,30 @@ export default {
         "country_scotland": "Scozia",
         "country_selection_textfield_headline_search": "Ricerca",
         "country_sy": "Siria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Temperatura e umidità attuali del suolo",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Giornaliero",
         "date": "Data",
         "date_type": "Tipo di dati",
@@ -14697,13 +15149,19 @@ export default {
         "striplight_adaptbutton": "Adattarsi",
         "striplight_lengthadaptationtext": "Se la striscia luminosa è stata tagliata, puoi regolarne la lunghezza nell'app per adattarla.",
         "striplight_lengthtitle": "Lunghezza della striscia luminosa",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "To allow operation of only one switch at a time",
+        "switch1_active_timer_field_small_off_text": "Spegnimento dell'interruttore 1 in {0}",
+        "switch1_active_timer_field_small_on_text": "Interruttore 1 acceso in {0}",
+        "switch2_active_timer_field_small_off_text": "Spegnimento dell'interruttore 2 in {0}",
+        "switch2_active_timer_field_small_on_text": "Interruttore 2 acceso in {0}",
+        "switch_active_timer_field_small_off_text": "Spegnimento in {0}",
+        "switch_active_timer_field_small_on_text": "Accensione in {0}",
+        "switch_interlock": "Blocco",
+        "switch_interlock_addbtn_text": "Aggiungi un blocco",
+        "switch_interlock_addtitle": "Aggiungi un nuovo blocco",
+        "switch_interlock_delete_popup_topic": "Vuoi davvero eliminare il blocco?",
+        "switch_interlock_editbtn_text": "Elimina blocco",
+        "switch_interlock_edittitle": "Modifica il blocco",
+        "switch_interlockingdescription": "Per consentire il funzionamento di un solo interruttore alla volta",
         "switch_overcharge_headline_description": "La funzione disattiva automaticamente la ricarica dei dispositivi mobili, inclusi telefoni cellulari e power bank, quando sono completamente carichi per evitare il sovraccarico e prolungare la durata della batteria.",
         "switch_overcharge_headline_text": "Protezione da sovraccarico",
         "switchdescription_energy": "Nota che i dati sull'energia totale verranno azzerati e non potranno essere recuperati nuovamente.",
@@ -14713,7 +15171,11 @@ export default {
         "switchmodule_switch2title": "Interruttore 2",
         "switchmodule_switchdescription": "Descrizione dell'interruttore",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Stato dell'interruttore",
+        "switchmodule_typesetting1": "Capovolgi per cambiare lo stato dell'interruttore",
+        "switchmodule_typesetting2": "Sincrono allo stato attuale dell'interruttore",
         "switchmodule_typesetting3": "Ripristina il nuovo stato",
+        "switchmodule_typesettingdescription": "Per configurare le impostazioni dello stato dell'interruttore",
         "switchonlyonce": "Il cambio di modalità è consentito solo una volta al giorno.",
         "switchtitle_energyconsumption": "Vuoi davvero passare al consumo di energia?",
         "switchtitle_energygeneration": "Vuoi davvero passare alla produzione di energia?",
@@ -14778,12 +15240,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "La presa1 sarà spenta alle {0}",
         "timer_powerstrip_socket1_switched_on_text": "La presa1 sarà accesa alle {0}",
         "timer_sockets_button_text": "Inizia",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "L'interruttore 1 si spegnerà tra circa {0}",
+        "timer_switch1_active_timer_field_description_on_text": "L'interruttore 1 si accenderà tra circa {0}",
+        "timer_switch2_active_timer_field_description_off_text": "L'interruttore 2 si spegnerà tra circa {0}",
+        "timer_switch2_active_timer_field_description_on_text": "L'interruttore 2 si accenderà tra circa {0}",
+        "timer_switch_active_timer_field_description_off_text": "L'interruttore verrà spento all'incirca tra {0}",
+        "timer_switch_active_timer_field_description_on_text": "L'interruttore si accenderà all'incirca tra {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Luce secondaria",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Luce principale",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Luce",
@@ -15240,7 +15702,30 @@ export default {
         "country_scotland": "스코틀랜드",
         "country_selection_textfield_headline_search": "검색",
         "country_sy": "시리아",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "현재 토양 온도 및 습도",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "일간",
         "date": "날짜",
         "date_type": "날짜 유형",
@@ -15756,6 +16241,12 @@ export default {
         "striplight_adaptbutton": "적응",
         "striplight_lengthadaptationtext": "스트립 라이트가 잘린 경우 앱에서 길이를 조정하여 조정할 수 있습니다.",
         "striplight_lengthtitle": "스트립 라이트 길이",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -15772,7 +16263,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "모드 전환은 하루에 한 번만 허용됩니다.",
         "switchtitle_energyconsumption": "정말 에너지 소비로 전환하고 싶으신가요?",
         "switchtitle_energygeneration": "정말 에너지 발전으로 전환하고 싶으신가요?",
@@ -16299,7 +16794,30 @@ export default {
         "country_scotland": "Škotija",
         "country_selection_textfield_headline_search": "Ieškoti...",
         "country_sy": "Sirija",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Dabartinė dirvožemio temperatūra ir drėgmė",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Kasdien",
         "date": "Data",
         "date_type": "Datos tipas",
@@ -16815,6 +17333,12 @@ export default {
         "striplight_adaptbutton": "Prisitaikyti",
         "striplight_lengthadaptationtext": "Jei juostelės apšvietimas buvo nupjautas, galite pritaikyti ilgį programėlėje.",
         "striplight_lengthtitle": "Juostelė Šviesos ilgis",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -16831,7 +17355,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Režimo perjungimas leidžiamas tik kartą per dieną.",
         "switchtitle_energyconsumption": "Ar tikrai norite pereiti prie energijos vartojimo?",
         "switchtitle_energygeneration": "Ar tikrai norite pereiti prie energijos gamybos?",
@@ -17358,7 +17886,30 @@ export default {
         "country_scotland": "Skotija",
         "country_selection_textfield_headline_search": "Meklēt",
         "country_sy": "Sīrija",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Pašreizējā augsnes temperatūra un mitrums",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Ikdienas",
         "date": "Datums",
         "date_type": "Datuma veids",
@@ -17874,12 +18425,18 @@ export default {
         "striplight_adaptbutton": "Pielāgot",
         "striplight_lengthadaptationtext": "Ja sloksnes gaisma ir sagriezta, lietotnē varat pielāgot garumu, lai to pielāgotu.",
         "striplight_lengthtitle": "Sloksne Gaismas garums",
+        "switch1_active_timer_field_small_off_text": "Izslēgt 1. slēdzi vietnē {0}",
+        "switch1_active_timer_field_small_on_text": "Ieslēgt 1. slēdzi vietnē {0}",
+        "switch2_active_timer_field_small_off_text": "Izslēgt 2. slēdzi vietnē {0}",
+        "switch2_active_timer_field_small_on_text": "Ieslēgt 2. slēdzi vietnē {0}",
+        "switch_active_timer_field_small_off_text": "Izslēgšana vietnē {0}",
+        "switch_active_timer_field_small_on_text": "Ieslēgšana vietnē {0}",
         "switch_interlock": "Bloķēšana",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
+        "switch_interlock_addbtn_text": "Pievienot bloķēšanu",
+        "switch_interlock_addtitle": "Pievienot jaunu bloķēšanu",
+        "switch_interlock_delete_popup_topic": "Vai tiešām vēlaties dzēst bloķēšanu?",
+        "switch_interlock_editbtn_text": "Dzēst bloķēšanu",
+        "switch_interlock_edittitle": "Rediģēt bloķēšanu",
         "switch_interlockingdescription": "Vienlaicīgi atļaut darboties tikai ar vienu slēdzi.",
         "switch_overcharge_headline_description": "Šī funkcija automātiski izslēdz mobilo ierīču, tostarp mobilo tālruņu un barošanas bateriju, uzlādi, kad tās ir pilnībā uzlādētas, lai novērstu to pārmērīgu uzlādi un pagarinātu baterijas darbības laiku.",
         "switch_overcharge_headline_text": "Aizsardzība pret pārmērīgu uzlādi",
@@ -17890,7 +18447,11 @@ export default {
         "switchmodule_switch2title": "Slēdzis 2",
         "switchmodule_switchdescription": "Slēdža apraksts",
         "switchmodule_switchtitle": "Slēdzis",
+        "switchmodule_typesetting": "Slēdža stāvoklis",
+        "switchmodule_typesetting1": "Apgrieziet, lai mainītu slēdža stāvokli",
+        "switchmodule_typesetting2": "Sinhroni ar pašreizējo slēdža stāvokli",
         "switchmodule_typesetting3": "Atiestatīt uz jauno stāvokli",
+        "switchmodule_typesettingdescription": "Lai konfigurētu slēdža stāvokļa iestatījumu",
         "switchonlyonce": "Režīmu pārslēgšana ir atļauta tikai vienu reizi dienā.",
         "switchtitle_energyconsumption": "Vai tiešām vēlaties pāriet uz enerģijas patēriņu?",
         "switchtitle_energygeneration": "Vai tiešām vēlaties pāriet uz enerģijas ražošanu?",
@@ -17955,12 +18516,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Kontaktligzda1 tiks izslēgta aptuveni {0}.",
         "timer_powerstrip_socket1_switched_on_text": "Kontaktligzda1 tiks ieslēgta aptuveni {0}",
         "timer_sockets_button_text": "Sākt",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "1. slēdzis tiks izslēgts aptuveni {0}.",
+        "timer_switch1_active_timer_field_description_on_text": "1. slēdzis tiks ieslēgts aptuveni {0}.",
+        "timer_switch2_active_timer_field_description_off_text": "2. slēdzis tiks izslēgts aptuveni {0}",
+        "timer_switch2_active_timer_field_description_on_text": "2. slēdzis tiks ieslēgts aptuveni {0}",
+        "timer_switch_active_timer_field_description_off_text": "Slēdzis tiks izslēgts aptuveni {0}.",
+        "timer_switch_active_timer_field_description_on_text": "Slēdzis tiks ieslēgts aptuveni {0}.",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Sekundārais apgaismojums",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Galvenais apgaismojums",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Apgaismojums",
@@ -18417,7 +18978,30 @@ export default {
         "country_scotland": "Skottland",
         "country_selection_textfield_headline_search": "Søk",
         "country_sy": "Syria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Nåværende jordtemperatur og fuktighet",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Daglig",
         "date": "Dato",
         "date_type": "Datatype",
@@ -18757,10 +19341,10 @@ export default {
         "power_strip_feature_2_socket_2_text_min_on": "Stikkontakt 2 på om {0} min",
         "power_strip_feature_2_socket_3_text_min_off": "Stikkontakt 3 av om {0} min",
         "power_strip_feature_2_socket_3_text_min_on": "Stikkontakt 3 på om {0} min",
-        "power_strip_feature_2_socket_4_text_min_off": "Socket 4 will be switched off in {0} ",
-        "power_strip_feature_2_socket_4_text_min_on": "Socket 4 will be switched on in {0}",
-        "power_strip_feature_2_socket_5_text_min_off": "Socket 5 will be switched off in {0}",
-        "power_strip_feature_2_socket_5_text_min_on": "Socket 5 will be switched on in {0}",
+        "power_strip_feature_2_socket_4_text_min_off": "Stikkontakt 4 vil bli slått av om {0} ",
+        "power_strip_feature_2_socket_4_text_min_on": "Stikkontakt 4 vil bli slått på om {0}",
+        "power_strip_feature_2_socket_5_text_min_off": "Stikkontakt 5 vil bli slått av om {0}",
+        "power_strip_feature_2_socket_5_text_min_on": "Stikkontakt 5 vil bli slått på om {0}",
         "power_strip_feature_2_socket_usb_text_min_off": "USB-kontakt av om {0} min",
         "power_strip_feature_2_socket_usb_text_min_on": "USB-kontakt på om {0} min",
         "power_strip_specific_settings_desc_socket_1": "Stikkontakt 1 Beskrivelse",
@@ -18770,8 +19354,8 @@ export default {
         "power_strip_tile_socket_1_headline": "Stikkontakt 1",
         "power_strip_tile_socket_2_headline": "Stikkontakt 2",
         "power_strip_tile_socket_3_headline": "Stikkontakt 3",
-        "power_strip_tile_socket_4_headline": "Socket 4",
-        "power_strip_tile_socket_5_headline": "Socket 5",
+        "power_strip_tile_socket_4_headline": "Stikkontakt 4",
+        "power_strip_tile_socket_5_headline": "Stikkontakt 5",
         "power_strip_tile_socket_usb_headline": "USB-kontakt",
         "privatemode_description": "For å lukke lyd- og videooverføringskanalene for kameraet for å beskytte brukernes personvern når de er hjemme.",
         "push_notifications_contact_sensor_door_closing_title": "Avslutningspåminnelse",
@@ -18814,16 +19398,16 @@ export default {
         "smoke_alerteffect": "Røyk oppdaget",
         "smoke_alertfree": "Ingen røyk oppdaget",
         "smoke_equipmentselftest": "Selvtest av utstyr",
-        "socket1_active_timer_field_small_off_text": "Socket 1 off in {0}",
-        "socket1_active_timer_field_small_on_text": "Socket 1 on in {0}",
-        "socket2_active_timer_field_small_off_text": "Socket 2 off in {0}",
-        "socket2_active_timer_field_small_on_text": "Socket 2 on in {0}",
-        "socket3_active_timer_field_small_off_text": "Socket 3 off in {0}",
-        "socket3_active_timer_field_small_on_text": "Socket 3 on in {0}",
-        "socket4_active_timer_field_small_off_text": "Socket 4 off in {0}",
-        "socket4_active_timer_field_small_on_text": "Socket 4 on in {0}",
-        "socket5_active_timer_field_small_off_text": "Socket 5 off in {0}",
-        "socket5_active_timer_field_small_on_text": "Socket 5 on in {0}",
+        "socket1_active_timer_field_small_off_text": "Stikkontakt 1 av i {0}",
+        "socket1_active_timer_field_small_on_text": "Stikkontakt 1 på i {0}",
+        "socket2_active_timer_field_small_off_text": "Stikkontakt 2 av i {0}",
+        "socket2_active_timer_field_small_on_text": "Stikkontakt 2 på i {0}",
+        "socket3_active_timer_field_small_off_text": "Stikkontakt 3 av i {0}",
+        "socket3_active_timer_field_small_on_text": "Stikkontakt 3 på i {0}",
+        "socket4_active_timer_field_small_off_text": "Stikkontakt 4 av i {0}",
+        "socket4_active_timer_field_small_on_text": "Stikkontakt 4 på i {0}",
+        "socket5_active_timer_field_small_off_text": "Stikkontakt 5 av i {0}",
+        "socket5_active_timer_field_small_on_text": "Stikkontakt 5 på i {0}",
         "socket_settings_firstbox_status1_description": "Enheten forblir slått av",
         "socket_settings_firstbox_status2_description": "Enheten forblir slått på",
         "socket_settings_firstbox_status3_description": "Gå tilbake til forrige tilstand før strømmen ble slått av",
@@ -18840,8 +19424,8 @@ export default {
         "sockets_specific_settings_relay_status": "Strøm på atferd",
         "sockets_specific_settings_relay_status_remember": "Husk siste status",
         "sockets_specific_settings_switch_inching": "Automatisk avslåing",
-        "socketusb_active_timer_field_small_off_text": "USB off in {0}",
-        "socketusb_active_timer_field_small_on_text": "USB on in {0}",
+        "socketusb_active_timer_field_small_off_text": "USB av i {0}",
+        "socketusb_active_timer_field_small_on_text": "USB på i {0}",
         "software_update_found_failed_update_error_5012": "Enheten er frakoblet.",
         "solar_bt_pp_battery_headline": "Batteri",
         "solar_bt_pp_field_dm": "Dynamisk stemning",
@@ -18933,23 +19517,33 @@ export default {
         "striplight_adaptbutton": "Tilpass",
         "striplight_lengthadaptationtext": "Hvis stripelyset er kuttet, kan du justere lengden i appen for å tilpasse det.",
         "striplight_lengthtitle": "Stripelys lengde",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "To allow operation of only one switch at a time",
+        "switch1_active_timer_field_small_off_text": "Bryter 1 av om {0}",
+        "switch1_active_timer_field_small_on_text": "Bryter 1 på om {0}",
+        "switch2_active_timer_field_small_off_text": "Bryter 2 av om {0}",
+        "switch2_active_timer_field_small_on_text": "Bryter 2 på om {0}",
+        "switch_active_timer_field_small_off_text": "Bryteren av om {0}",
+        "switch_active_timer_field_small_on_text": "Bryteren på om {0}",
+        "switch_interlock": "Sammenkobling",
+        "switch_interlock_addbtn_text": "Legg til sammenkobling",
+        "switch_interlock_addtitle": "Legg til en ny sammenkobling",
+        "switch_interlock_delete_popup_topic": "Vil du virkelig slette sammenkoblingen?",
+        "switch_interlock_editbtn_text": "Slett sammenkobling",
+        "switch_interlock_edittitle": "Rediger sammenkobling",
+        "switch_interlockingdescription": "For å tillate bruk av kun én bryter om gangen",
         "switch_overcharge_headline_description": "Funksjonen slår automatisk av lading av mobilenhetene dine, inkludert mobiltelefoner og strømbanker, når de er fulladet for å forhindre overlading og forlenge batteriets levetid.",
         "switch_overcharge_headline_text": "Beskyttelse mot overlading",
         "switchdescription_energy": "Vær oppmerksom på at de totale energidataene nullstilles og ikke kan gjenopprettes på nytt.",
         "switchinching_overview_description_text": "For å slå av enheten automatisk etter en periode.",
-        "switchmodule_switch1description": "Switch 1 description",
-        "switchmodule_switch1title": "Switch 1",
-        "switchmodule_switch2title": "Switch 2",
-        "switchmodule_switchdescription": "Switch description",
-        "switchmodule_switchtitle": "Switch",
-        "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_switch1description": "Beskrivelse av bryter 1",
+        "switchmodule_switch1title": "Bryter 1",
+        "switchmodule_switch2title": "Bryter 2",
+        "switchmodule_switchdescription": "Beskrivelse av bryteren",
+        "switchmodule_switchtitle": "Bryter",
+        "switchmodule_typesetting": "Bryterens tilstand",
+        "switchmodule_typesetting1": "Vend for å endre brytertilstanden",
+        "switchmodule_typesetting2": "Synkron til gjeldende brytertilstand",
+        "switchmodule_typesetting3": "Tilbakestill til ny tilstand",
+        "switchmodule_typesettingdescription": "Slik konfigurerer du innstillingen for bryterstatus",
         "switchonlyonce": "Det er bare tillatt å bytte modus én gang om dagen.",
         "switchtitle_energyconsumption": "Ønsker du virkelig å bytte til energiforbruk?",
         "switchtitle_energygeneration": "Ønsker du virkelig å bytte til energiproduksjon?",
@@ -18999,7 +19593,7 @@ export default {
         "thermostat_vacationplan": "Ferieplan",
         "thermostat_warm": "Komfort",
         "third_irrigation": "Tredje vanning",
-        "time_format": "Time format",
+        "time_format": "Tidsformat",
         "time_unit_h": "h",
         "timer_ceiling_fan_headline_text": "Nedtelling",
         "timer_ceiling_fan_lighting_switched_off_text": "Belysningen vil bli slått av ved ca. {0}",
@@ -19014,12 +19608,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Stikkontakt1 vil bli slått av ca. {0}",
         "timer_powerstrip_socket1_switched_on_text": "Stikkontakt1 slås på ca. {0}",
         "timer_sockets_button_text": "Start",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Bryter 1 vil bli slått av om {0}",
+        "timer_switch1_active_timer_field_description_on_text": "Bryter 1 vil bli slått på om {0}",
+        "timer_switch2_active_timer_field_description_off_text": "Bryter 2 vil bli slått av om {0}",
+        "timer_switch2_active_timer_field_description_on_text": "Bryter 2 vil bli slått på om {0}",
+        "timer_switch_active_timer_field_description_off_text": "Bryteren vil bli slått av om {0}",
+        "timer_switch_active_timer_field_description_on_text": "Bryteren vil bli slått på om {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Sekundær belysning",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Hovedbelysning",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Belysning",
@@ -19476,7 +20070,30 @@ export default {
         "country_scotland": "Szkocja",
         "country_selection_textfield_headline_search": "Wyszukaj",
         "country_sy": "Syria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Aktualna temperatura i wilgotność gleby",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "codzienny",
         "date": "Data",
         "date_type": "Typ daty",
@@ -19992,6 +20609,12 @@ export default {
         "striplight_adaptbutton": "Dostosuj",
         "striplight_lengthadaptationtext": "Jeśli światło paska zostało przycięte, możesz dostosować długość w aplikacji, aby ją dostosować.",
         "striplight_lengthtitle": "Długość paska światła",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -20008,7 +20631,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Przełączanie trybu jest dozwolone tylko raz dziennie.",
         "switchtitle_energyconsumption": "Czy naprawdę chcesz przejść na zużycie energii?",
         "switchtitle_energygeneration": "Czy naprawdę chcesz przejść na wytwarzanie energii?",
@@ -20535,7 +21162,30 @@ export default {
         "country_scotland": "Escócia",
         "country_selection_textfield_headline_search": "Procurar",
         "country_sy": "Síria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Temperatura e umidade atuais do solo",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Diariamente",
         "date": "Data",
         "date_type": "Tipo de data",
@@ -21051,6 +21701,12 @@ export default {
         "striplight_adaptbutton": "Adaptar",
         "striplight_lengthadaptationtext": "Se a faixa de luz tiver sido cortada, você poderá ajustar o comprimento no aplicativo para adaptá-la.",
         "striplight_lengthtitle": "Comprimento da luz de tira",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Intertravamento",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -21067,7 +21723,11 @@ export default {
         "switchmodule_switch2title": "Troca 2",
         "switchmodule_switchdescription": "Descrição do switch",
         "switchmodule_switchtitle": "Trocar",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Redefinir para o novo estado",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Mudar o modo só é permitido uma vez por dia.",
         "switchtitle_energyconsumption": "Você realmente quer mudar para o consumo de energia?",
         "switchtitle_energygeneration": "Você realmente quer mudar para a geração de energia?",
@@ -21594,7 +22254,30 @@ export default {
         "country_scotland": "Scoţia",
         "country_selection_textfield_headline_search": "Căutare",
         "country_sy": "Siria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Temperatura și umiditatea actuală a solului",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Zilnic",
         "date": "Data",
         "date_type": "Tipul datei",
@@ -22110,6 +22793,12 @@ export default {
         "striplight_adaptbutton": "Adaptare",
         "striplight_lengthadaptationtext": "Dacă lumina benzii a fost tăiată, atunci puteți ajusta lungimea în aplicație pentru a o adapta.",
         "striplight_lengthtitle": "Lungimea luminii benzii",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -22126,7 +22815,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Comutarea modului este permisă numai o dată pe zi.",
         "switchtitle_energyconsumption": "Chiar vrei să treci la consumul de energie?",
         "switchtitle_energygeneration": "Chiar vrei să treci la generarea de energie?",
@@ -22653,7 +23346,30 @@ export default {
         "country_scotland": "Шотландия",
         "country_selection_textfield_headline_search": "Поиск",
         "country_sy": "Сирия",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Текущая температура и влажность почвы",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Ежедневно",
         "date": "ДАТА",
         "date_type": "Тип даты",
@@ -23169,6 +23885,12 @@ export default {
         "striplight_adaptbutton": "Адаптировать",
         "striplight_lengthadaptationtext": "Если ленточный светильник отрезан, вы можете настроить его длину в приложении, чтобы адаптировать ее.",
         "striplight_lengthtitle": "Длина полосы света",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -23185,7 +23907,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Переключать режим разрешается только один раз в день.",
         "switchtitle_energyconsumption": "Ты действительно хочешь перейти на энергопотребление?",
         "switchtitle_energygeneration": "Ты действительно хочешь перейти на выработку энергии?",
@@ -23712,7 +24438,30 @@ export default {
         "country_scotland": "Škótsko",
         "country_selection_textfield_headline_search": "Hľadať",
         "country_sy": "Sýria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Aktuálna teplota a vlhkosť pôdy",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Denne",
         "date": "Dátum",
         "date_type": "Typ dátumu",
@@ -24052,10 +24801,10 @@ export default {
         "power_strip_feature_2_socket_2_text_min_on": "Zásuvka 2 zapnutá za {0} min",
         "power_strip_feature_2_socket_3_text_min_off": "Zásuvka 3 vypnutá za {0} min",
         "power_strip_feature_2_socket_3_text_min_on": "Zásuvka 3 zapnutá za {0} min",
-        "power_strip_feature_2_socket_4_text_min_off": "Socket 4 will be switched off in {0} ",
-        "power_strip_feature_2_socket_4_text_min_on": "Socket 4 will be switched on in {0}",
-        "power_strip_feature_2_socket_5_text_min_off": "Socket 5 will be switched off in {0}",
-        "power_strip_feature_2_socket_5_text_min_on": "Socket 5 will be switched on in {0}",
+        "power_strip_feature_2_socket_4_text_min_off": "Zásuvka 4 bude vypnutá za {0} ",
+        "power_strip_feature_2_socket_4_text_min_on": "Zásuvka 4 bude zapnutá za {0}",
+        "power_strip_feature_2_socket_5_text_min_off": "Zásuvka 5 bude vypnutá o{0}",
+        "power_strip_feature_2_socket_5_text_min_on": "Zásuvka 5 bude zapnutá o{0}",
         "power_strip_feature_2_socket_usb_text_min_off": "Zásuvka USB vypnutá za {0} min",
         "power_strip_feature_2_socket_usb_text_min_on": "Zásuvka USB zapnutá za {0} min",
         "power_strip_specific_settings_desc_socket_1": "Popis zásuvky 1",
@@ -24065,8 +24814,8 @@ export default {
         "power_strip_tile_socket_1_headline": "Zásuvka 1",
         "power_strip_tile_socket_2_headline": "Zásuvka 2",
         "power_strip_tile_socket_3_headline": "Zásuvka 3",
-        "power_strip_tile_socket_4_headline": "Socket 4",
-        "power_strip_tile_socket_5_headline": "Socket 5",
+        "power_strip_tile_socket_4_headline": "Zásuvka 4",
+        "power_strip_tile_socket_5_headline": "Zásuvka 5",
         "power_strip_tile_socket_usb_headline": "USB zásuvka",
         "privatemode_description": "Uzatvorenie kanálov prenosu zvuku a obrazu pre kameru na ochranu súkromia používateľov, keď sú doma.",
         "push_notifications_contact_sensor_door_closing_title": "Upozornenie na uzatvorenie",
@@ -24109,16 +24858,16 @@ export default {
         "smoke_alerteffect": "Detekovaný dym",
         "smoke_alertfree": "Nebol zistený žiadny dym",
         "smoke_equipmentselftest": "Autotest zariadenia",
-        "socket1_active_timer_field_small_off_text": "Socket 1 off in {0}",
-        "socket1_active_timer_field_small_on_text": "Socket 1 on in {0}",
-        "socket2_active_timer_field_small_off_text": "Socket 2 off in {0}",
-        "socket2_active_timer_field_small_on_text": "Socket 2 on in {0}",
-        "socket3_active_timer_field_small_off_text": "Socket 3 off in {0}",
-        "socket3_active_timer_field_small_on_text": "Socket 3 on in {0}",
-        "socket4_active_timer_field_small_off_text": "Socket 4 off in {0}",
-        "socket4_active_timer_field_small_on_text": "Socket 4 on in {0}",
-        "socket5_active_timer_field_small_off_text": "Socket 5 off in {0}",
-        "socket5_active_timer_field_small_on_text": "Socket 5 on in {0}",
+        "socket1_active_timer_field_small_off_text": "Zásuvka 1 vypnutá {0}",
+        "socket1_active_timer_field_small_on_text": "Zásuvka 1 zapnutá {0}",
+        "socket2_active_timer_field_small_off_text": "Zásuvka 2 vypnutá {0}",
+        "socket2_active_timer_field_small_on_text": "Zásuvka 2 zapnutá {0}",
+        "socket3_active_timer_field_small_off_text": "Zásuvka 3 vypnutá {0}",
+        "socket3_active_timer_field_small_on_text": "Zásuvka 3 zapnutá {0}",
+        "socket4_active_timer_field_small_off_text": "Zásuvka 4 vypnutá {0}",
+        "socket4_active_timer_field_small_on_text": "Zásuvka 4 zapnutá {0}",
+        "socket5_active_timer_field_small_off_text": "Zásuvka 5 vypnutá {0}",
+        "socket5_active_timer_field_small_on_text": "Zásuvka 5 zapnutá {0}",
         "socket_settings_firstbox_status1_description": "Zariadenie zostáva vypnuté",
         "socket_settings_firstbox_status2_description": "Zariadenie zostáva zapnuté",
         "socket_settings_firstbox_status3_description": "Návrat do predchádzajúceho stavu pred vypnutím napájania",
@@ -24135,8 +24884,8 @@ export default {
         "sockets_specific_settings_relay_status": "Správanie pri zapnutí",
         "sockets_specific_settings_relay_status_remember": "Zapamätať si posledný stav",
         "sockets_specific_settings_switch_inching": "Automatické vypnutie ",
-        "socketusb_active_timer_field_small_off_text": "USB off in {0}",
-        "socketusb_active_timer_field_small_on_text": "USB on in {0}",
+        "socketusb_active_timer_field_small_off_text": "Vypnuté pripojenie USB {0}",
+        "socketusb_active_timer_field_small_on_text": "Zapnuté USB {0}",
         "software_update_found_failed_update_error_5012": "Zariadenie je v režime offline.",
         "solar_bt_pp_battery_headline": "Batéria",
         "solar_bt_pp_field_dm": "Dynamický režim",
@@ -24228,23 +24977,33 @@ export default {
         "striplight_adaptbutton": "Prispôsobiť",
         "striplight_lengthadaptationtext": "Ak bolo svetlo pásu odrezané, môžete upraviť dĺžku v aplikácii a prispôsobiť ho.",
         "striplight_lengthtitle": "Dĺžka pásu svetla",
-        "switch_interlock": "Interlocking",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
-        "switch_interlockingdescription": "To allow operation of only one switch at a time",
+        "switch1_active_timer_field_small_off_text": "Vypnutie 1 v {0}",
+        "switch1_active_timer_field_small_on_text": "Zapnutie vypínača 1 {0}",
+        "switch2_active_timer_field_small_off_text": "Vypínač 2 vypnutie {0}",
+        "switch2_active_timer_field_small_on_text": "Zapnutie vypínača 2 {0}",
+        "switch_active_timer_field_small_off_text": "Vypnutie {0}",
+        "switch_active_timer_field_small_on_text": "Zapnutie {0}",
+        "switch_interlock": "Zablokovanie",
+        "switch_interlock_addbtn_text": "Pridať blokovanie",
+        "switch_interlock_addtitle": "Pridanie nového blokovania",
+        "switch_interlock_delete_popup_topic": "Naozaj chcete odstrániť blokovanie?",
+        "switch_interlock_editbtn_text": "Odstrániť blokovanie",
+        "switch_interlock_edittitle": "Úprava blokovania",
+        "switch_interlockingdescription": "Umožniť prevádzku iba jedného spínača naraz",
         "switch_overcharge_headline_description": "Táto funkcia automaticky vypne nabíjanie mobilných zariadení vrátane mobilných telefónov a napájacích bánk, keď sú úplne nabité, aby sa zabránilo prebíjaniu a predĺžila sa životnosť batérie.",
         "switch_overcharge_headline_text": "Ochrana proti prebíjaniu",
         "switchdescription_energy": "Upozorňujeme, že údaje o celkovej energii sa vynulujú a nie je možné ich znovu obnoviť.",
         "switchinching_overview_description_text": "Automatické vypnutie zariadenia po určitej dobe.",
-        "switchmodule_switch1description": "Switch 1 description",
-        "switchmodule_switch1title": "Switch 1",
-        "switchmodule_switch2title": "Switch 2",
-        "switchmodule_switchdescription": "Switch description",
-        "switchmodule_switchtitle": "Switch",
-        "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_switch1description": "Popis prepínača 1",
+        "switchmodule_switch1title": "Prepínač 1",
+        "switchmodule_switch2title": "Prepínač 2",
+        "switchmodule_switchdescription": "Popis prepínača",
+        "switchmodule_switchtitle": "Prepnúť",
+        "switchmodule_typesetting": "Stav prepínača",
+        "switchmodule_typesetting1": "Otočením zmeňte stav prepínača",
+        "switchmodule_typesetting2": "Synchrónne s aktuálnym stavom prepínača",
+        "switchmodule_typesetting3": "Obnovenie do nového stavu",
+        "switchmodule_typesettingdescription": "Konfigurácia nastavenia stavu prepínača",
         "switchonlyonce": "Prepínanie režimu je povolené len raz denne.",
         "switchtitle_energyconsumption": "Naozaj chcete prejsť na spotrebu energie?",
         "switchtitle_energygeneration": "Naozaj chcete prejsť na výrobu energie?",
@@ -24294,7 +25053,7 @@ export default {
         "thermostat_vacationplan": "Plán dovolenky",
         "thermostat_warm": "Komfort",
         "third_irrigation": "Tretie zavlažovanie",
-        "time_format": "Time format",
+        "time_format": "Formát času",
         "time_unit_h": "h",
         "timer_ceiling_fan_headline_text": "Časovač",
         "timer_ceiling_fan_lighting_switched_off_text": "Osvetlenie sa vypne približne o {0}",
@@ -24309,12 +25068,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Zásuvka1 sa vypne približne o {0}",
         "timer_powerstrip_socket1_switched_on_text": "Zásuvka1 sa zapne približne o {0}",
         "timer_sockets_button_text": "Štart",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Prepínač 1 sa vypne približne o čase {0}",
+        "timer_switch1_active_timer_field_description_on_text": "Prepínač 1 sa zapne približne {0}",
+        "timer_switch2_active_timer_field_description_off_text": "Prepínač 2 sa vypne približne o čase {0}",
+        "timer_switch2_active_timer_field_description_on_text": "Prepínač 2 sa zapne približne {0}",
+        "timer_switch_active_timer_field_description_off_text": "Prepínač bude vypnutý približne o čase {0}",
+        "timer_switch_active_timer_field_description_on_text": "Prepínač sa zapne približne {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Sekundárne osvetlenie",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Hlavné osvetlenie",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Osvetlenie",
@@ -24771,7 +25530,30 @@ export default {
         "country_scotland": "Skottland",
         "country_selection_textfield_headline_search": "Sök",
         "country_sy": "Syrien",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Nuvarande temperatur och luftfuktighet i jorden",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Dagligen",
         "date": "Datum",
         "date_type": "Datumtyp",
@@ -25287,6 +26069,12 @@ export default {
         "striplight_adaptbutton": "Anpassa",
         "striplight_lengthadaptationtext": "Om remslampan har klippts kan du justera längden i appen för att anpassa den.",
         "striplight_lengthtitle": "Strip Ljuslängd",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -25303,7 +26091,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Det är bara tillåtet att byta läge en gång per dag.",
         "switchtitle_energyconsumption": "Vill du verkligen gå över till energiförbrukning?",
         "switchtitle_energygeneration": "Vill du verkligen gå över till energiproduktion?",
@@ -25830,7 +26622,30 @@ export default {
         "country_scotland": "İskoçya",
         "country_selection_textfield_headline_search": "Ara",
         "country_sy": "Suriye",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Mevcut toprak sıcaklığı ve nemi",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Günlük",
         "date": "Tarih",
         "date_type": "Tarih türü",
@@ -26346,6 +27161,12 @@ export default {
         "striplight_adaptbutton": "Uyarlamak",
         "striplight_lengthadaptationtext": "Şerit ışığı kesilmişse, uyarlamak için Uygulamadaki uzunluğu ayarlayabilirsiniz.",
         "striplight_lengthtitle": "Şerit Işık uzunluğu",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Interlocking",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -26362,7 +27183,11 @@ export default {
         "switchmodule_switch2title": "Switch 2",
         "switchmodule_switchdescription": "Switch description",
         "switchmodule_switchtitle": "Switch",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Reset to the new state",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Modun değiştirilmesine günde yalnızca bir kez izin verilir.",
         "switchtitle_energyconsumption": "Gerçekten enerji tüketimine geçmek istiyor musunuz?",
         "switchtitle_energygeneration": "Gerçekten enerji üretimine geçmek istiyor musunuz?",
@@ -26889,7 +27714,30 @@ export default {
         "country_scotland": "Шотландія",
         "country_selection_textfield_headline_search": "Пошук",
         "country_sy": "Сирія",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Поточна температура і вологість ґрунту",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Щодня",
         "date": "Дата",
         "date_type": "Тип дати",
@@ -27405,12 +28253,18 @@ export default {
         "striplight_adaptbutton": "Адаптувати",
         "striplight_lengthadaptationtext": "Якщо світлодіодна стрічка була обрізана, ви можете відрегулювати довжину в додатку, щоб налаштувати її.",
         "striplight_lengthtitle": "Довжина світлової смуги",
+        "switch1_active_timer_field_small_off_text": "Вимкніть 1 через {0}",
+        "switch1_active_timer_field_small_on_text": "Увімкніть 1 через {0}",
+        "switch2_active_timer_field_small_off_text": "Вимкніть 2 через {0}",
+        "switch2_active_timer_field_small_on_text": "Увімкніть 2 через {0}",
+        "switch_active_timer_field_small_off_text": "Вимкнути через {0}",
+        "switch_active_timer_field_small_on_text": "Увімкнути через {0}",
         "switch_interlock": "Блокування",
-        "switch_interlock_addbtn_text": "Add interlock",
-        "switch_interlock_addtitle": "Add a new interlock",
-        "switch_interlock_delete_popup_topic": "Do you really want to delete the interlock?",
-        "switch_interlock_editbtn_text": "Delete interlock",
-        "switch_interlock_edittitle": "Edit the interlock",
+        "switch_interlock_addbtn_text": "Додати блокування",
+        "switch_interlock_addtitle": "Додати новий механізм блокування",
+        "switch_interlock_delete_popup_topic": "Ви дійсно хочете видалити блокування?",
+        "switch_interlock_editbtn_text": "Видалити блокування",
+        "switch_interlock_edittitle": "Редагувати блокування",
         "switch_interlockingdescription": "Обмежити функціонування так, щоб одночасно міг бути активним лише один перемикач.",
         "switch_overcharge_headline_description": "Функція автоматично відключає зарядку ваших мобільних пристроїв, включаючи мобільні телефони та банки живлення, коли вони повністю заряджені, щоб запобігти перезарядженню та продовжити термін служби акумулятора.",
         "switch_overcharge_headline_text": "Захист від перезарядки",
@@ -27421,7 +28275,11 @@ export default {
         "switchmodule_switch2title": "Перемикач 2",
         "switchmodule_switchdescription": "Опис перемикача",
         "switchmodule_switchtitle": "Перемикач",
+        "switchmodule_typesetting": "Режим оперативних переключень",
+        "switchmodule_typesetting1": "Переверніть для зміни стану перемикача",
+        "switchmodule_typesetting2": "Синхронний з поточним станом перемикача",
         "switchmodule_typesetting3": "Перезавантаження до нової конфігурації",
+        "switchmodule_typesettingdescription": "Налаштування режиму перемикача",
         "switchonlyonce": "Зміна режиму дозволена тільки один раз на добу.",
         "switchtitle_energyconsumption": "Ви дійсно хочете перейти в режим \"Енергоспоживання\"?",
         "switchtitle_energygeneration": "Ви дійсно бажаєте перейти в режим \"Генерації енергії\"?",
@@ -27486,12 +28344,12 @@ export default {
         "timer_powerstrip_socket1_switched_off_text": "Розетку1 буде вимкнено приблизно о {0}",
         "timer_powerstrip_socket1_switched_on_text": "Розетку1 буде ввімкнено приблизно о {0}",
         "timer_sockets_button_text": "Почати",
-        "timer_switch1_active_timer_field_description_off_text": "Switch 1 will be switched off at about {0}",
-        "timer_switch1_active_timer_field_description_on_text": "Switch 1 will be switched on at about {0}",
-        "timer_switch2_active_timer_field_description_off_text": "Switch 2 will be switched off at about {0}",
-        "timer_switch2_active_timer_field_description_on_text": "Switch 2 will be switched on at about {0}",
-        "timer_switch_active_timer_field_description_off_text": "Switch will be switched off at about {0}",
-        "timer_switch_active_timer_field_description_on_text": "Switch will be switched on at about {0}",
+        "timer_switch1_active_timer_field_description_off_text": "Перемикач 1 буде вимкнено приблизно через {0}",
+        "timer_switch1_active_timer_field_description_on_text": "Перемикач 1 буде ввімкнено приблизно о {0}",
+        "timer_switch2_active_timer_field_description_off_text": "Перемикач 2 буде вимкнено приблизно о{0}",
+        "timer_switch2_active_timer_field_description_on_text": "Перемикач 2 буде ввімкнено приблизно о {0}",
+        "timer_switch_active_timer_field_description_off_text": "Перемикач буде вимкнено приблизно через {0}",
+        "timer_switch_active_timer_field_description_on_text": "Перемикач буде увімкнено приблизно через {0}",
         "timeschedule_add_schedule_Lighting_applyfor_selection2_text": "Вторинне освітлення",
         "timeschedule_add_schedule_Lighting_applyfor_selection_text": "Основне освітлення",
         "timeschedule_add_schedule_ceiling_fan_selectionfield_text": "Освітлення",
@@ -27948,7 +28806,30 @@ export default {
         "country_scotland": "Escócia",
         "country_selection_textfield_headline_search": "Procurar",
         "country_sy": "Síria",
+        "curation_calibration_callibrate_btn_text": "Calibrate",
+        "curation_calibration_nextbtn_text": "Next step",
         "current_temp_humidity": "Temperatura e umidade atuais do solo",
+        "curtain_calibration_failed_text": "The smart curtain's calibration process failed.",
+        "curtain_calibration_progress_text": "Calibration in progress.....",
+        "curtain_calibration_success_text": "The smart curtain's calibration process was successful.",
+        "curtain_calibration_tryagin_text": "Try again",
+        "curtain_control_headline_text": "Curtain",
+        "curtain_control_title": "Curtain control",
+        "curtain_fast_calibration": "Fast calibration",
+        "curtain_fast_calibration_step1": "1. Close the curtains fully.\n\n2. Click “Next Step” to start calibration.",
+        "curtain_fast_calibration_step2": "Please enter the time needed by the curtain for full closure.",
+        "curtain_fast_toast_text": "Fast calibration is not allowed when the curtain equipment is at 0% opening level.",
+        "curtain_intelligent_calibration": "Intelligent calibration",
+        "curtain_intelligent_calibration_step1": "1. Install the curtain correctly before calibration so that it can be fully opened/closed.\n\n2. Move the curtain to being fully opened/closed & press pause.\n\n3. Click “Next Step”, once that is done.",
+        "curtain_intelligent_calibration_step2": "1. Move the curtain to fully “open”.\n\n2. Move the curtain to fully “close”.\n\n3. Once the steps in 1 and 2 are done, then click ““Calibrate.",
+        "curtain_motor_steering": "Motor steering",
+        "curtain_motor_steering1": "Forward direction",
+        "curtain_motor_steering1_description": "The curtain motor runs in forward direction",
+        "curtain_motor_steering2": "Backward direction",
+        "curtain_motor_steering2_description": "The curtain motor runs in backward direction",
+        "curtain_motor_steering_tip": "To configure the curtain's motor steering direction",
+        "curtain_summary_action_txt_1": "Open",
+        "curtain_summary_action_txt_2": "Close",
         "daily": "Diariamente",
         "date": "Data",
         "date_type": "Tipo de data",
@@ -28464,6 +29345,12 @@ export default {
         "striplight_adaptbutton": "Adaptar",
         "striplight_lengthadaptationtext": "Se a faixa de luz tiver sido cortada, você poderá ajustar o comprimento no aplicativo para adaptá-la.",
         "striplight_lengthtitle": "Comprimento da luz de tira",
+        "switch1_active_timer_field_small_off_text": "Switch 1 off in {0}",
+        "switch1_active_timer_field_small_on_text": "Switch 1 on in {0}",
+        "switch2_active_timer_field_small_off_text": "Switch 2 off in {0}",
+        "switch2_active_timer_field_small_on_text": "Switch 2 on in {0}",
+        "switch_active_timer_field_small_off_text": "Switch off in {0}",
+        "switch_active_timer_field_small_on_text": "Switch on in {0}",
         "switch_interlock": "Intertravamento",
         "switch_interlock_addbtn_text": "Add interlock",
         "switch_interlock_addtitle": "Add a new interlock",
@@ -28480,7 +29367,11 @@ export default {
         "switchmodule_switch2title": "Troca 2",
         "switchmodule_switchdescription": "Descrição do switch",
         "switchmodule_switchtitle": "Trocar",
+        "switchmodule_typesetting": "Switch state",
+        "switchmodule_typesetting1": "Flip to change the switch state",
+        "switchmodule_typesetting2": "Synchronous to the current switch state",
         "switchmodule_typesetting3": "Redefinir para o novo estado",
+        "switchmodule_typesettingdescription": "To configure the switch state setting",
         "switchonlyonce": "Mudar o modo só é permitido uma vez por dia.",
         "switchtitle_energyconsumption": "Você realmente quer mudar para o consumo de energia?",
         "switchtitle_energygeneration": "Você realmente quer mudar para a geração de energia?",