@leaflow/sdk 0.0.0-dev.29.g8fe6a71 → 0.0.0-dev.293.g578f043

package/dist/dns/v1/generated/validators/createCredentialRequestBody.zod.d.ts

@@ -0,0 +1,82 @@
+/**
+ * Generated by orval 🍺
+ * Do not edit manually.
+ * Leaflow DNS API
+ * Manage DNS records across supported providers through a single API. Register a provider
+ * credential, and every domain that credential can reach becomes readable and writable here.
+ *
+ * Reads and writes always reflect the current state at the provider. Records changed through the
+ * provider's own console, an ACME client, or any other automation are visible here immediately,
+ * and changes made here take effect there.
+ *
+ * ## Authentication
+ *
+ * Every request carries a scoped token; see the `bearerAuth` security scheme.
+ *
+ * **Neither the path nor the headers carry a `project_id`**: the current project is determined by
+ * the token.
+ *
+ * ## Conventions
+ *
+ * - **Records are addressed as record sets, not as individual records.** All records sharing a
+ *   name and a type form one set — for example, three A records pointing at three addresses. This
+ *   API exposes no per-record identifier, because provider-assigned identifiers are neither
+ *   portable across providers nor guaranteed to be stable within one.
+ * - **`PUT` replaces an entire record set; `PATCH` names individual values.** See below; this is
+ *   the single most consequential distinction in this API.
+ * - **Confirm which credential owns a domain before writing to it.** The same domain can exist in
+ *   more than one provider account — most commonly while a domain is being migrated and the old
+ *   account still holds it — and only one of them is actually serving queries.
+ * - **Changes do not take effect everywhere at once.** A write reaches the provider immediately,
+ *   but resolvers elsewhere continue serving the previous value until its TTL expires. Allow at
+ *   least one TTL before verifying a change by resolving the name.
+ * - **Credential material is never returned.** No operation, including the one that registers it,
+ *   returns the values that were submitted. A credential that was entered incorrectly must be
+ *   deleted and registered again.
+ *
+ * ## PUT or PATCH
+ *
+ * `PUT` states what a record set should contain. `PATCH` names values to add or remove and leaves
+ * the rest alone. The distinction is concurrency.
+ *
+ * Changing part of a set with `PUT` means reading it and submitting a modified list. That is a
+ * read-modify-write: a value added in between — by a concurrent certificate issuance, by another
+ * automation, or from the provider's own console — is absent from the submitted list and is
+ * therefore removed. Every request in that sequence returns 2xx.
+ *
+ * `PATCH` reads nothing. It is the only operation on a record set safe to issue concurrently, and
+ * the one certificate issuance must use.
+ * OpenAPI spec version: 1.0.0
+ */
+import * as zod from "zod";
+export declare const createCredentialRequestBodyNameMax = 128;
+export declare const CreateCredentialRequestBody: zod.ZodObject<{
+    alidns: zod.ZodOptional<zod.ZodObject<{
+        access_key_id: zod.ZodString;
+        access_key_secret: zod.ZodString;
+        region_id: zod.ZodOptional<zod.ZodString>;
+    }, zod.z.core.$strict>>;
+    cloudflare: zod.ZodOptional<zod.ZodObject<{
+        api_token: zod.ZodString;
+        zone_token: zod.ZodOptional<zod.ZodString>;
+    }, zod.z.core.$strict>>;
+    name: zod.ZodString;
+    provider: zod.ZodEnum<{
+        cloudflare: "cloudflare";
+        tencentcloud: "tencentcloud";
+        alidns: "alidns";
+        route53: "route53";
+    }>;
+    route53: zod.ZodOptional<zod.ZodObject<{
+        access_key_id: zod.ZodString;
+        region: zod.ZodOptional<zod.ZodString>;
+        secret_access_key: zod.ZodString;
+        session_token: zod.ZodOptional<zod.ZodString>;
+    }, zod.z.core.$strict>>;
+    tencentcloud: zod.ZodOptional<zod.ZodObject<{
+        secret_id: zod.ZodString;
+        secret_key: zod.ZodString;
+    }, zod.z.core.$strict>>;
+}, zod.z.core.$strict>;
+export type CreateCredentialRequestBody = zod.input<typeof CreateCredentialRequestBody>;
+export type CreateCredentialRequestBodyOutput = zod.output<typeof CreateCredentialRequestBody>;

package/dist/dns/v1/generated/validators/createCredentialRequestBody.zod.js

@@ -0,0 +1,71 @@
+/**
+ * Generated by orval 🍺
+ * Do not edit manually.
+ * Leaflow DNS API
+ * Manage DNS records across supported providers through a single API. Register a provider
+ * credential, and every domain that credential can reach becomes readable and writable here.
+ *
+ * Reads and writes always reflect the current state at the provider. Records changed through the
+ * provider's own console, an ACME client, or any other automation are visible here immediately,
+ * and changes made here take effect there.
+ *
+ * ## Authentication
+ *
+ * Every request carries a scoped token; see the `bearerAuth` security scheme.
+ *
+ * **Neither the path nor the headers carry a `project_id`**: the current project is determined by
+ * the token.
+ *
+ * ## Conventions
+ *
+ * - **Records are addressed as record sets, not as individual records.** All records sharing a
+ *   name and a type form one set — for example, three A records pointing at three addresses. This
+ *   API exposes no per-record identifier, because provider-assigned identifiers are neither
+ *   portable across providers nor guaranteed to be stable within one.
+ * - **`PUT` replaces an entire record set; `PATCH` names individual values.** See below; this is
+ *   the single most consequential distinction in this API.
+ * - **Confirm which credential owns a domain before writing to it.** The same domain can exist in
+ *   more than one provider account — most commonly while a domain is being migrated and the old
+ *   account still holds it — and only one of them is actually serving queries.
+ * - **Changes do not take effect everywhere at once.** A write reaches the provider immediately,
+ *   but resolvers elsewhere continue serving the previous value until its TTL expires. Allow at
+ *   least one TTL before verifying a change by resolving the name.
+ * - **Credential material is never returned.** No operation, including the one that registers it,
+ *   returns the values that were submitted. A credential that was entered incorrectly must be
+ *   deleted and registered again.
+ *
+ * ## PUT or PATCH
+ *
+ * `PUT` states what a record set should contain. `PATCH` names values to add or remove and leaves
+ * the rest alone. The distinction is concurrency.
+ *
+ * Changing part of a set with `PUT` means reading it and submitting a modified list. That is a
+ * read-modify-write: a value added in between — by a concurrent certificate issuance, by another
+ * automation, or from the provider's own console — is absent from the submitted list and is
+ * therefore removed. Every request in that sequence returns 2xx.
+ *
+ * `PATCH` reads nothing. It is the only operation on a record set safe to issue concurrently, and
+ * the one certificate issuance must use.
+ * OpenAPI spec version: 1.0.0
+ */
+import * as zod from "zod";
+import { AliDNSConfig } from "./aliDNSConfig.zod.js";
+import { CloudflareConfig } from "./cloudflareConfig.zod.js";
+import { Provider } from "./provider.zod.js";
+import { Route53Config } from "./route53Config.zod.js";
+import { TencentCloudConfig } from "./tencentCloudConfig.zod.js";
+export const createCredentialRequestBodyNameMax = 128;
+export const CreateCredentialRequestBody = zod
+    .strictObject({
+    alidns: AliDNSConfig.optional(),
+    cloudflare: CloudflareConfig.optional(),
+    name: zod
+        .string()
+        .min(1)
+        .max(createCredentialRequestBodyNameMax)
+        .describe("A display name for this credential"),
+    provider: Provider,
+    route53: Route53Config.optional(),
+    tencentcloud: TencentCloudConfig.optional(),
+})
+    .describe("`provider` selects which configuration block is read. The remaining blocks are ignored.");

package/dist/dns/v1/generated/validators/credentialResource.zod.d.ts

@@ -0,0 +1,74 @@
+/**
+ * Generated by orval 🍺
+ * Do not edit manually.
+ * Leaflow DNS API
+ * Manage DNS records across supported providers through a single API. Register a provider
+ * credential, and every domain that credential can reach becomes readable and writable here.
+ *
+ * Reads and writes always reflect the current state at the provider. Records changed through the
+ * provider's own console, an ACME client, or any other automation are visible here immediately,
+ * and changes made here take effect there.
+ *
+ * ## Authentication
+ *
+ * Every request carries a scoped token; see the `bearerAuth` security scheme.
+ *
+ * **Neither the path nor the headers carry a `project_id`**: the current project is determined by
+ * the token.
+ *
+ * ## Conventions
+ *
+ * - **Records are addressed as record sets, not as individual records.** All records sharing a
+ *   name and a type form one set — for example, three A records pointing at three addresses. This
+ *   API exposes no per-record identifier, because provider-assigned identifiers are neither
+ *   portable across providers nor guaranteed to be stable within one.
+ * - **`PUT` replaces an entire record set; `PATCH` names individual values.** See below; this is
+ *   the single most consequential distinction in this API.
+ * - **Confirm which credential owns a domain before writing to it.** The same domain can exist in
+ *   more than one provider account — most commonly while a domain is being migrated and the old
+ *   account still holds it — and only one of them is actually serving queries.
+ * - **Changes do not take effect everywhere at once.** A write reaches the provider immediately,
+ *   but resolvers elsewhere continue serving the previous value until its TTL expires. Allow at
+ *   least one TTL before verifying a change by resolving the name.
+ * - **Credential material is never returned.** No operation, including the one that registers it,
+ *   returns the values that were submitted. A credential that was entered incorrectly must be
+ *   deleted and registered again.
+ *
+ * ## PUT or PATCH
+ *
+ * `PUT` states what a record set should contain. `PATCH` names values to add or remove and leaves
+ * the rest alone. The distinction is concurrency.
+ *
+ * Changing part of a set with `PUT` means reading it and submitting a modified list. That is a
+ * read-modify-write: a value added in between — by a concurrent certificate issuance, by another
+ * automation, or from the provider's own console — is absent from the submitted list and is
+ * therefore removed. Every request in that sequence returns 2xx.
+ *
+ * `PATCH` reads nothing. It is the only operation on a record set safe to issue concurrently, and
+ * the one certificate issuance must use.
+ * OpenAPI spec version: 1.0.0
+ */
+import * as zod from "zod";
+export declare const CredentialResource: zod.ZodObject<{
+    created_at: zod.z.ZodISODateTime;
+    fingerprint: zod.ZodString;
+    id: zod.ZodUUID;
+    last_verified_at: zod.ZodNullable<zod.z.ZodISODateTime>;
+    last_verify_error: zod.ZodNullable<zod.ZodString>;
+    name: zod.ZodString;
+    provider: zod.ZodEnum<{
+        cloudflare: "cloudflare";
+        tencentcloud: "tencentcloud";
+        alidns: "alidns";
+        route53: "route53";
+    }>;
+    redacted: zod.ZodString;
+    status: zod.ZodEnum<{
+        active: "active";
+        disabled: "disabled";
+    }>;
+    suspended_at: zod.ZodNullable<zod.z.ZodISODateTime>;
+    updated_at: zod.z.ZodISODateTime;
+}, zod.z.core.$strict>;
+export type CredentialResource = zod.input<typeof CredentialResource>;
+export type CredentialResourceOutput = zod.output<typeof CredentialResource>;

package/dist/dns/v1/generated/validators/credentialResource.zod.js

@@ -0,0 +1,79 @@
+/**
+ * Generated by orval 🍺
+ * Do not edit manually.
+ * Leaflow DNS API
+ * Manage DNS records across supported providers through a single API. Register a provider
+ * credential, and every domain that credential can reach becomes readable and writable here.
+ *
+ * Reads and writes always reflect the current state at the provider. Records changed through the
+ * provider's own console, an ACME client, or any other automation are visible here immediately,
+ * and changes made here take effect there.
+ *
+ * ## Authentication
+ *
+ * Every request carries a scoped token; see the `bearerAuth` security scheme.
+ *
+ * **Neither the path nor the headers carry a `project_id`**: the current project is determined by
+ * the token.
+ *
+ * ## Conventions
+ *
+ * - **Records are addressed as record sets, not as individual records.** All records sharing a
+ *   name and a type form one set — for example, three A records pointing at three addresses. This
+ *   API exposes no per-record identifier, because provider-assigned identifiers are neither
+ *   portable across providers nor guaranteed to be stable within one.
+ * - **`PUT` replaces an entire record set; `PATCH` names individual values.** See below; this is
+ *   the single most consequential distinction in this API.
+ * - **Confirm which credential owns a domain before writing to it.** The same domain can exist in
+ *   more than one provider account — most commonly while a domain is being migrated and the old
+ *   account still holds it — and only one of them is actually serving queries.
+ * - **Changes do not take effect everywhere at once.** A write reaches the provider immediately,
+ *   but resolvers elsewhere continue serving the previous value until its TTL expires. Allow at
+ *   least one TTL before verifying a change by resolving the name.
+ * - **Credential material is never returned.** No operation, including the one that registers it,
+ *   returns the values that were submitted. A credential that was entered incorrectly must be
+ *   deleted and registered again.
+ *
+ * ## PUT or PATCH
+ *
+ * `PUT` states what a record set should contain. `PATCH` names values to add or remove and leaves
+ * the rest alone. The distinction is concurrency.
+ *
+ * Changing part of a set with `PUT` means reading it and submitting a modified list. That is a
+ * read-modify-write: a value added in between — by a concurrent certificate issuance, by another
+ * automation, or from the provider's own console — is absent from the submitted list and is
+ * therefore removed. Every request in that sequence returns 2xx.
+ *
+ * `PATCH` reads nothing. It is the only operation on a record set safe to issue concurrently, and
+ * the one certificate issuance must use.
+ * OpenAPI spec version: 1.0.0
+ */
+import * as zod from "zod";
+import { CredentialStatus } from "./credentialStatus.zod.js";
+import { Provider } from "./provider.zod.js";
+export const CredentialResource = zod
+    .strictObject({
+    created_at: zod.iso.datetime({ offset: true }),
+    fingerprint: zod.string().describe("Equal fingerprints denote the same credential material"),
+    id: zod.uuid(),
+    last_verified_at: zod.iso
+        .datetime({ offset: true })
+        .nullable()
+        .describe("When the credential was last confirmed to work; null if it never has"),
+    last_verify_error: zod
+        .string()
+        .nullable()
+        .describe("Why the most recent check failed; null if the most recent check succeeded"),
+    name: zod.string(),
+    provider: Provider,
+    redacted: zod
+        .string()
+        .describe("A partially masked fragment of the credential, for visual identification only"),
+    status: CredentialStatus,
+    suspended_at: zod.iso
+        .datetime({ offset: true })
+        .nullable()
+        .describe("When the credential was suspended because the project was suspended; null if it was not. Cleared when the project is restored"),
+    updated_at: zod.iso.datetime({ offset: true }),
+})
+    .describe("A registered provider credential. The credential material itself is never included.");

package/dist/dns/v1/generated/validators/credentialStatus.zod.d.ts

@@ -0,0 +1,57 @@
+/**
+ * Generated by orval 🍺
+ * Do not edit manually.
+ * Leaflow DNS API
+ * Manage DNS records across supported providers through a single API. Register a provider
+ * credential, and every domain that credential can reach becomes readable and writable here.
+ *
+ * Reads and writes always reflect the current state at the provider. Records changed through the
+ * provider's own console, an ACME client, or any other automation are visible here immediately,
+ * and changes made here take effect there.
+ *
+ * ## Authentication
+ *
+ * Every request carries a scoped token; see the `bearerAuth` security scheme.
+ *
+ * **Neither the path nor the headers carry a `project_id`**: the current project is determined by
+ * the token.
+ *
+ * ## Conventions
+ *
+ * - **Records are addressed as record sets, not as individual records.** All records sharing a
+ *   name and a type form one set — for example, three A records pointing at three addresses. This
+ *   API exposes no per-record identifier, because provider-assigned identifiers are neither
+ *   portable across providers nor guaranteed to be stable within one.
+ * - **`PUT` replaces an entire record set; `PATCH` names individual values.** See below; this is
+ *   the single most consequential distinction in this API.
+ * - **Confirm which credential owns a domain before writing to it.** The same domain can exist in
+ *   more than one provider account — most commonly while a domain is being migrated and the old
+ *   account still holds it — and only one of them is actually serving queries.
+ * - **Changes do not take effect everywhere at once.** A write reaches the provider immediately,
+ *   but resolvers elsewhere continue serving the previous value until its TTL expires. Allow at
+ *   least one TTL before verifying a change by resolving the name.
+ * - **Credential material is never returned.** No operation, including the one that registers it,
+ *   returns the values that were submitted. A credential that was entered incorrectly must be
+ *   deleted and registered again.
+ *
+ * ## PUT or PATCH
+ *
+ * `PUT` states what a record set should contain. `PATCH` names values to add or remove and leaves
+ * the rest alone. The distinction is concurrency.
+ *
+ * Changing part of a set with `PUT` means reading it and submitting a modified list. That is a
+ * read-modify-write: a value added in between — by a concurrent certificate issuance, by another
+ * automation, or from the provider's own console — is absent from the submitted list and is
+ * therefore removed. Every request in that sequence returns 2xx.
+ *
+ * `PATCH` reads nothing. It is the only operation on a record set safe to issue concurrently, and
+ * the one certificate issuance must use.
+ * OpenAPI spec version: 1.0.0
+ */
+import * as zod from "zod";
+export declare const CredentialStatus: zod.ZodEnum<{
+    active: "active";
+    disabled: "disabled";
+}>;
+export type CredentialStatus = zod.input<typeof CredentialStatus>;
+export type CredentialStatusOutput = zod.output<typeof CredentialStatus>;

package/dist/dns/v1/generated/validators/credentialStatus.zod.js

@@ -0,0 +1,54 @@
+/**
+ * Generated by orval 🍺
+ * Do not edit manually.
+ * Leaflow DNS API
+ * Manage DNS records across supported providers through a single API. Register a provider
+ * credential, and every domain that credential can reach becomes readable and writable here.
+ *
+ * Reads and writes always reflect the current state at the provider. Records changed through the
+ * provider's own console, an ACME client, or any other automation are visible here immediately,
+ * and changes made here take effect there.
+ *
+ * ## Authentication
+ *
+ * Every request carries a scoped token; see the `bearerAuth` security scheme.
+ *
+ * **Neither the path nor the headers carry a `project_id`**: the current project is determined by
+ * the token.
+ *
+ * ## Conventions
+ *
+ * - **Records are addressed as record sets, not as individual records.** All records sharing a
+ *   name and a type form one set — for example, three A records pointing at three addresses. This
+ *   API exposes no per-record identifier, because provider-assigned identifiers are neither
+ *   portable across providers nor guaranteed to be stable within one.
+ * - **`PUT` replaces an entire record set; `PATCH` names individual values.** See below; this is
+ *   the single most consequential distinction in this API.
+ * - **Confirm which credential owns a domain before writing to it.** The same domain can exist in
+ *   more than one provider account — most commonly while a domain is being migrated and the old
+ *   account still holds it — and only one of them is actually serving queries.
+ * - **Changes do not take effect everywhere at once.** A write reaches the provider immediately,
+ *   but resolvers elsewhere continue serving the previous value until its TTL expires. Allow at
+ *   least one TTL before verifying a change by resolving the name.
+ * - **Credential material is never returned.** No operation, including the one that registers it,
+ *   returns the values that were submitted. A credential that was entered incorrectly must be
+ *   deleted and registered again.
+ *
+ * ## PUT or PATCH
+ *
+ * `PUT` states what a record set should contain. `PATCH` names values to add or remove and leaves
+ * the rest alone. The distinction is concurrency.
+ *
+ * Changing part of a set with `PUT` means reading it and submitting a modified list. That is a
+ * read-modify-write: a value added in between — by a concurrent certificate issuance, by another
+ * automation, or from the provider's own console — is absent from the submitted list and is
+ * therefore removed. Every request in that sequence returns 2xx.
+ *
+ * `PATCH` reads nothing. It is the only operation on a record set safe to issue concurrently, and
+ * the one certificate issuance must use.
+ * OpenAPI spec version: 1.0.0
+ */
+import * as zod from "zod";
+export const CredentialStatus = zod
+    .enum(["active", "disabled"])
+    .describe("`active` is usable. `disabled` means the platform has disabled this credential and requires\ncontact with support.\n\nA project that has been suspended is reported separately, in `suspended_at`.");

package/dist/dns/v1/generated/validators/cursorPagination.zod.d.ts

@@ -0,0 +1,57 @@
+/**
+ * Generated by orval 🍺
+ * Do not edit manually.
+ * Leaflow DNS API
+ * Manage DNS records across supported providers through a single API. Register a provider
+ * credential, and every domain that credential can reach becomes readable and writable here.
+ *
+ * Reads and writes always reflect the current state at the provider. Records changed through the
+ * provider's own console, an ACME client, or any other automation are visible here immediately,
+ * and changes made here take effect there.
+ *
+ * ## Authentication
+ *
+ * Every request carries a scoped token; see the `bearerAuth` security scheme.
+ *
+ * **Neither the path nor the headers carry a `project_id`**: the current project is determined by
+ * the token.
+ *
+ * ## Conventions
+ *
+ * - **Records are addressed as record sets, not as individual records.** All records sharing a
+ *   name and a type form one set — for example, three A records pointing at three addresses. This
+ *   API exposes no per-record identifier, because provider-assigned identifiers are neither
+ *   portable across providers nor guaranteed to be stable within one.
+ * - **`PUT` replaces an entire record set; `PATCH` names individual values.** See below; this is
+ *   the single most consequential distinction in this API.
+ * - **Confirm which credential owns a domain before writing to it.** The same domain can exist in
+ *   more than one provider account — most commonly while a domain is being migrated and the old
+ *   account still holds it — and only one of them is actually serving queries.
+ * - **Changes do not take effect everywhere at once.** A write reaches the provider immediately,
+ *   but resolvers elsewhere continue serving the previous value until its TTL expires. Allow at
+ *   least one TTL before verifying a change by resolving the name.
+ * - **Credential material is never returned.** No operation, including the one that registers it,
+ *   returns the values that were submitted. A credential that was entered incorrectly must be
+ *   deleted and registered again.
+ *
+ * ## PUT or PATCH
+ *
+ * `PUT` states what a record set should contain. `PATCH` names values to add or remove and leaves
+ * the rest alone. The distinction is concurrency.
+ *
+ * Changing part of a set with `PUT` means reading it and submitting a modified list. That is a
+ * read-modify-write: a value added in between — by a concurrent certificate issuance, by another
+ * automation, or from the provider's own console — is absent from the submitted list and is
+ * therefore removed. Every request in that sequence returns 2xx.
+ *
+ * `PATCH` reads nothing. It is the only operation on a record set safe to issue concurrently, and
+ * the one certificate issuance must use.
+ * OpenAPI spec version: 1.0.0
+ */
+import * as zod from "zod";
+export declare const CursorPagination: zod.ZodObject<{
+    page_size: zod.ZodInt;
+    next_cursor: zod.ZodOptional<zod.ZodNullable<zod.ZodString>>;
+}, zod.z.core.$strict>;
+export type CursorPagination = zod.input<typeof CursorPagination>;
+export type CursorPaginationOutput = zod.output<typeof CursorPagination>;

package/dist/dns/v1/generated/validators/cursorPagination.zod.js

@@ -0,0 +1,57 @@
+/**
+ * Generated by orval 🍺
+ * Do not edit manually.
+ * Leaflow DNS API
+ * Manage DNS records across supported providers through a single API. Register a provider
+ * credential, and every domain that credential can reach becomes readable and writable here.
+ *
+ * Reads and writes always reflect the current state at the provider. Records changed through the
+ * provider's own console, an ACME client, or any other automation are visible here immediately,
+ * and changes made here take effect there.
+ *
+ * ## Authentication
+ *
+ * Every request carries a scoped token; see the `bearerAuth` security scheme.
+ *
+ * **Neither the path nor the headers carry a `project_id`**: the current project is determined by
+ * the token.
+ *
+ * ## Conventions
+ *
+ * - **Records are addressed as record sets, not as individual records.** All records sharing a
+ *   name and a type form one set — for example, three A records pointing at three addresses. This
+ *   API exposes no per-record identifier, because provider-assigned identifiers are neither
+ *   portable across providers nor guaranteed to be stable within one.
+ * - **`PUT` replaces an entire record set; `PATCH` names individual values.** See below; this is
+ *   the single most consequential distinction in this API.
+ * - **Confirm which credential owns a domain before writing to it.** The same domain can exist in
+ *   more than one provider account — most commonly while a domain is being migrated and the old
+ *   account still holds it — and only one of them is actually serving queries.
+ * - **Changes do not take effect everywhere at once.** A write reaches the provider immediately,
+ *   but resolvers elsewhere continue serving the previous value until its TTL expires. Allow at
+ *   least one TTL before verifying a change by resolving the name.
+ * - **Credential material is never returned.** No operation, including the one that registers it,
+ *   returns the values that were submitted. A credential that was entered incorrectly must be
+ *   deleted and registered again.
+ *
+ * ## PUT or PATCH
+ *
+ * `PUT` states what a record set should contain. `PATCH` names values to add or remove and leaves
+ * the rest alone. The distinction is concurrency.
+ *
+ * Changing part of a set with `PUT` means reading it and submitting a modified list. That is a
+ * read-modify-write: a value added in between — by a concurrent certificate issuance, by another
+ * automation, or from the provider's own console — is absent from the submitted list and is
+ * therefore removed. Every request in that sequence returns 2xx.
+ *
+ * `PATCH` reads nothing. It is the only operation on a record set safe to issue concurrently, and
+ * the one certificate issuance must use.
+ * OpenAPI spec version: 1.0.0
+ */
+import * as zod from "zod";
+export const CursorPagination = zod
+    .strictObject({
+    page_size: zod.int().min(1),
+    next_cursor: zod.string().nullish(),
+})
+    .describe("Pagination metadata for keyset traversal. Pass next_cursor as cursor to read the following page; null means there is no following page.");

package/dist/dns/v1/generated/validators/deleteRecordSetParams.zod.d.ts

@@ -0,0 +1,56 @@
+/**
+ * Generated by orval 🍺
+ * Do not edit manually.
+ * Leaflow DNS API
+ * Manage DNS records across supported providers through a single API. Register a provider
+ * credential, and every domain that credential can reach becomes readable and writable here.
+ *
+ * Reads and writes always reflect the current state at the provider. Records changed through the
+ * provider's own console, an ACME client, or any other automation are visible here immediately,
+ * and changes made here take effect there.
+ *
+ * ## Authentication
+ *
+ * Every request carries a scoped token; see the `bearerAuth` security scheme.
+ *
+ * **Neither the path nor the headers carry a `project_id`**: the current project is determined by
+ * the token.
+ *
+ * ## Conventions
+ *
+ * - **Records are addressed as record sets, not as individual records.** All records sharing a
+ *   name and a type form one set — for example, three A records pointing at three addresses. This
+ *   API exposes no per-record identifier, because provider-assigned identifiers are neither
+ *   portable across providers nor guaranteed to be stable within one.
+ * - **`PUT` replaces an entire record set; `PATCH` names individual values.** See below; this is
+ *   the single most consequential distinction in this API.
+ * - **Confirm which credential owns a domain before writing to it.** The same domain can exist in
+ *   more than one provider account — most commonly while a domain is being migrated and the old
+ *   account still holds it — and only one of them is actually serving queries.
+ * - **Changes do not take effect everywhere at once.** A write reaches the provider immediately,
+ *   but resolvers elsewhere continue serving the previous value until its TTL expires. Allow at
+ *   least one TTL before verifying a change by resolving the name.
+ * - **Credential material is never returned.** No operation, including the one that registers it,
+ *   returns the values that were submitted. A credential that was entered incorrectly must be
+ *   deleted and registered again.
+ *
+ * ## PUT or PATCH
+ *
+ * `PUT` states what a record set should contain. `PATCH` names values to add or remove and leaves
+ * the rest alone. The distinction is concurrency.
+ *
+ * Changing part of a set with `PUT` means reading it and submitting a modified list. That is a
+ * read-modify-write: a value added in between — by a concurrent certificate issuance, by another
+ * automation, or from the provider's own console — is absent from the submitted list and is
+ * therefore removed. Every request in that sequence returns 2xx.
+ *
+ * `PATCH` reads nothing. It is the only operation on a record set safe to issue concurrently, and
+ * the one certificate issuance must use.
+ * OpenAPI spec version: 1.0.0
+ */
+import * as zod from "zod";
+export declare const DeleteRecordSetParams: zod.ZodObject<{
+    credential_id: zod.ZodOptional<zod.ZodUUID>;
+}, zod.z.core.$strict>;
+export type DeleteRecordSetParams = zod.input<typeof DeleteRecordSetParams>;
+export type DeleteRecordSetParamsOutput = zod.output<typeof DeleteRecordSetParams>;

package/dist/dns/v1/generated/validators/deleteRecordSetParams.zod.js

@@ -0,0 +1,57 @@
+/**
+ * Generated by orval 🍺
+ * Do not edit manually.
+ * Leaflow DNS API
+ * Manage DNS records across supported providers through a single API. Register a provider
+ * credential, and every domain that credential can reach becomes readable and writable here.
+ *
+ * Reads and writes always reflect the current state at the provider. Records changed through the
+ * provider's own console, an ACME client, or any other automation are visible here immediately,
+ * and changes made here take effect there.
+ *
+ * ## Authentication
+ *
+ * Every request carries a scoped token; see the `bearerAuth` security scheme.
+ *
+ * **Neither the path nor the headers carry a `project_id`**: the current project is determined by
+ * the token.
+ *
+ * ## Conventions
+ *
+ * - **Records are addressed as record sets, not as individual records.** All records sharing a
+ *   name and a type form one set — for example, three A records pointing at three addresses. This
+ *   API exposes no per-record identifier, because provider-assigned identifiers are neither
+ *   portable across providers nor guaranteed to be stable within one.
+ * - **`PUT` replaces an entire record set; `PATCH` names individual values.** See below; this is
+ *   the single most consequential distinction in this API.
+ * - **Confirm which credential owns a domain before writing to it.** The same domain can exist in
+ *   more than one provider account — most commonly while a domain is being migrated and the old
+ *   account still holds it — and only one of them is actually serving queries.
+ * - **Changes do not take effect everywhere at once.** A write reaches the provider immediately,
+ *   but resolvers elsewhere continue serving the previous value until its TTL expires. Allow at
+ *   least one TTL before verifying a change by resolving the name.
+ * - **Credential material is never returned.** No operation, including the one that registers it,
+ *   returns the values that were submitted. A credential that was entered incorrectly must be
+ *   deleted and registered again.
+ *
+ * ## PUT or PATCH
+ *
+ * `PUT` states what a record set should contain. `PATCH` names values to add or remove and leaves
+ * the rest alone. The distinction is concurrency.
+ *
+ * Changing part of a set with `PUT` means reading it and submitting a modified list. That is a
+ * read-modify-write: a value added in between — by a concurrent certificate issuance, by another
+ * automation, or from the provider's own console — is absent from the submitted list and is
+ * therefore removed. Every request in that sequence returns 2xx.
+ *
+ * `PATCH` reads nothing. It is the only operation on a record set safe to issue concurrently, and
+ * the one certificate issuance must use.
+ * OpenAPI spec version: 1.0.0
+ */
+import * as zod from "zod";
+export const DeleteRecordSetParams = zod.strictObject({
+    credential_id: zod
+        .uuid()
+        .optional()
+        .describe("Which credential to use. When omitted, the credential is determined from the domain; see ZONE_AMBIGUOUS"),
+});