@langify-org/dsh-code-server 0.2.1 → 0.2.2

package/README.ja.md

@@ -52,7 +52,7 @@ code-server とそのターミナル・拡張は、あなたの権限で、DSH
 
 ## 手動確認
 
-ブラウザーと実際の code-server が必要なため、`pnpm check` には含めていません。リリース前に `pnpm dev` で確認します。`pnpm dev` では [dev.patch.yml](dev.patch.yml) により、code-server の設定と拡張は `.dsh/code-server/` に置かれ、普段の code-server とは分かれます。Host とページの変更は `pnpm dev` の実行中に反映されますが、`src/extension/` の変更は `pnpm dev` を起動し直すまで反映されません。code-server が拡張を入れるのは起動時だけだからです。
+ブラウザーと実際の code-server が必要なため、`pnpm check` には含めていません。リリース前に `pnpm dev` で確認します。`pnpm dev` では [dev.patch.yml](dev.patch.yml) により、code-server の設定と拡張は `.dsh/code-server/` に置かれ、普段の code-server とは分かれます。Host とページの変更は `pnpm dev` の実行中に反映されますが、`src/extension/` の変更は、プラグインが次に開くエディターの画面から反映されるので、Code タブで**再接続**を押してください。
 
 1. **Code** にはエディターだけが表示され、上に何も出ない。エディターのステータスバーの **DSH** が接続済みになる（Restricted Mode でも）。接続が終わった後もエディターは残り、上の行に**再接続**が出る。
 2. **Workspace files** で選んだテキストファイルが Code ページの該当行で開く。画像は DSH のビューアーのまま開く。

package/README.md

@@ -52,7 +52,7 @@ code-server runs as you, and so do its terminal and extensions, outside DSH's sa
 
 ## Manual checks
 
-These need a browser and a real code-server, so they are not part of `pnpm check`. Run them with `pnpm dev` before a release. Under `pnpm dev`, [dev.patch.yml](dev.patch.yml) keeps code-server's settings and extensions in `.dsh/code-server/`, apart from your own code-server. Changes to the host and the page reload while `pnpm dev` runs; a change under `src/extension/` takes effect only after restarting `pnpm dev`, because code-server installs the extension when it starts.
+These need a browser and a real code-server, so they are not part of `pnpm check`. Run them with `pnpm dev` before a release. Under `pnpm dev`, [dev.patch.yml](dev.patch.yml) keeps code-server's settings and extensions in `.dsh/code-server/`, apart from your own code-server. Changes to the host and the page reload while `pnpm dev` runs; a change under `src/extension/` reaches the next editor window the plugin opens, so press **Reconnect** in the Code tab.
 
 1. **Code** shows the editor with nothing above it, and the editor's status bar shows **DSH** as connected, also in Restricted Mode. After the connection ends, the editor stays and a line above it offers **Reconnect**.
 2. A text file chosen in **Workspace files** opens in the Code page at its line; an image keeps DSH's viewer.

package/README.zh.md

@@ -52,7 +52,7 @@ code-server 及其终端和扩展以你的身份运行，不受 DSH 沙箱和审
 
 ## 手动检查
 
-这些检查需要浏览器和真实的 code-server，因此不包含在 `pnpm check` 中。发布前请用 `pnpm dev` 进行检查。在 `pnpm dev` 下，[dev.patch.yml](dev.patch.yml) 会把 code-server 的设置和扩展放在 `.dsh/code-server/` 中，与你平时使用的 code-server 分开。Host 和页面的修改会在 `pnpm dev` 运行期间重新加载；而 `src/extension/` 下的修改要重启 `pnpm dev` 后才会生效，因为 code-server 只在启动时安装扩展。
+这些检查需要浏览器和真实的 code-server，因此不包含在 `pnpm check` 中。发布前请用 `pnpm dev` 进行检查。在 `pnpm dev` 下，[dev.patch.yml](dev.patch.yml) 会把 code-server 的设置和扩展放在 `.dsh/code-server/` 中，与你平时使用的 code-server 分开。Host 和页面的修改会在 `pnpm dev` 运行期间重新加载；而 `src/extension/` 下的修改会在插件打开的下一个编辑器窗口中生效，因此请在 Code 标签页中点击**重新连接**。
 
 1. **Code** 只显示编辑器，上方没有其他内容；编辑器状态栏中的 **DSH** 显示为已连接（受限模式下也是如此）。连接结束后编辑器仍会保留，上方的一行会提供**重新连接**。
 2. 在 **Workspace files** 中选择的文本文件会在 Code 页面的对应行打开；图片仍使用 DSH 的查看器。

package/dist/index.mjs

@@ -1,4 +1,4 @@
-import { chmod, mkdtemp, realpath, rm } from "node:fs/promises";
+import { chmod, mkdtemp, realpath, rm, stat } from "node:fs/promises";
 import { homedir, tmpdir } from "node:os";
 import { isAbsolute, join } from "node:path";
 import { fileURLToPath } from "node:url";
@@ -472,6 +472,11 @@ var CodeServer = class {
 	#starting;
 	#child;
 	#disposed = false;
+	/** The CLI with its directories, once resolved, to install the extension with. */
+	#cli;
+	/** The installed VSIX's modification time and size. */
+	#installed = "";
+	#installing = Promise.resolve();
 	/**
 	* @param extension - VSIX installed before every start.
 	* @param onStarted - called once per process; its disposer runs when the process exits.
@@ -491,6 +496,18 @@ var CodeServer = class {
 		});
 		return this.#starting;
 	}
+	/**
+	* Install the bundled extension again if its VSIX changed since it was
+	* installed, so that windows opened from now on run it. Only a linked
+	* development copy of the plugin changes while it runs.
+	*/
+	syncExtension() {
+		const installing = this.#installing.then(async () => {
+			if (this.#cli !== void 0) await this.#installExtension(this.#cli);
+		});
+		this.#installing = installing.catch(() => {});
+		return installing;
+	}
 	async dispose() {
 		this.#disposed = true;
 		const child = this.#child;
@@ -507,16 +524,12 @@ var CodeServer = class {
 			throw new CodeServerError("code_server_not_found", `Cannot find ${this.#options.command}`, { cause: error });
 		}
 		const directories = [...this.#options.userDataDir === void 0 ? [] : ["--user-data-dir", this.#options.userDataDir], ...this.#options.extensionsDir === void 0 ? [] : ["--extensions-dir", this.#options.extensionsDir]];
+		this.#cli = [command, ...directories];
 		const version = await this.#run([command, "--version"]);
 		const commit = /^\S+ ([0-9a-f]{40}) /.exec(version)?.[1];
 		if (commit === void 0) throw new CodeServerError("code_server_failed", `Unrecognized code-server version: ${version}`);
-		await this.#run([
-			command,
-			...directories,
-			"--install-extension",
-			this.#extension,
-			"--force"
-		]);
+		this.#installed = "";
+		await this.syncExtension();
 		await rm(this.#socketPath, { force: true });
 		if (this.#disposed) throw new CodeServerError("code_server_failed", "The plugin has stopped");
 		const child = this.#subprocess.spawn({
@@ -558,6 +571,18 @@ var CodeServer = class {
 		await waitUntilListening(this.#socketPath, child);
 		return running;
 	}
+	async #installExtension(cli) {
+		const { mtimeMs, size } = await stat(this.#extension);
+		const stamp = `${mtimeMs}:${size}`;
+		if (stamp === this.#installed) return;
+		await this.#run([
+			...cli,
+			"--install-extension",
+			this.#extension,
+			"--force"
+		]);
+		this.#installed = stamp;
+	}
 	/** Run a short code-server CLI command and return its stdout. */
 	async #run(argv) {
 		const child = this.#subprocess.spawn({
@@ -615,6 +640,7 @@ function rpcRoutes(services, bridge, codeServer, editors) {
 			const { cwd } = await sessionFolders(services, sessionId, signal);
 			const folder = await localPath(services, cwd, cwd, "directory", signal);
 			await codeServer.ensure();
+			await codeServer.syncExtension();
 			const base = await editors[ingress]();
 			signal.throwIfAborted();
 			const bindingId = bridge.create(sessionId, ownerId, folder);

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@langify-org/dsh-code-server",
-  "version": "0.2.1",
+  "version": "0.2.2",
   "description": "Edit the session's working folder in code-server inside DeepSeek Harness, served through DSH's authenticated web server",
   "keywords": [
     "code-server",
@@ -83,7 +83,7 @@
     }
   },
   "scripts": {
-    "build": "tsdown && cd extension && vsce package --no-dependencies --skip-license --out dsh-code-bridge.vsix",
+    "build": "tsdown",
     "typecheck": "tsc -p src/client"
   }
 }