@kyo-so/cli 0.16.11 → 0.16.12

package/CHANGELOG.md

@@ -7,6 +7,15 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
+## [0.16.12] - 2026-08-31
+
+### Changed
+
+- Promote the Marketplace Plugin to `0.7.20` and pin its Codex and Claude Code
+  MCP definitions and Skill fallbacks to `@kyo-so/cli@0.16.11`.
+- Update the default Codex ACP adapter to
+  `@agentclientprotocol/codex-acp@1.7.0`.
+
 ## [0.16.11] - 2026-08-27
 
 ### Changed

package/README.ja.md

@@ -154,7 +154,7 @@ Use Kyoso diff_review on the current diff. I need a second opinion before mergin
 
 ## CLI
 
-package-runner の実行経路では、npm package をローカル alias `kyoso-cli` としてインストールします: `npx -y --package=kyoso-cli@npm:@kyo-so/cli kyoso` と `bunx --package kyoso-cli@npm:@kyo-so/cli kyoso` です。いずれも package と executable を別指定するため multi-bin package の binary 推測に依存せず、alias によって package 名が `@kyo-so/cli` である checkout が公開 package を隠すことも防ぎます。workflowで固定する場合は、`kyoso-cli@npm:@kyo-so/cli@0.16.10` のように実 package 名へcomplete SemVer pinを付けます。以下の例の `kyoso` は、すでにインストールされた executable の省略形です。Naming note: npm パッケージは `@kyo-so/cli` (製品名 Kyo-so に対応)、package-runner の alias は `kyoso-cli`、インストールされる CLI コマンドは短い `kyoso` です。
+package-runner の実行経路では、npm package をローカル alias `kyoso-cli` としてインストールします: `npx -y --package=kyoso-cli@npm:@kyo-so/cli kyoso` と `bunx --package kyoso-cli@npm:@kyo-so/cli kyoso` です。いずれも package と executable を別指定するため multi-bin package の binary 推測に依存せず、alias によって package 名が `@kyo-so/cli` である checkout が公開 package を隠すことも防ぎます。workflowで固定する場合は、`kyoso-cli@npm:@kyo-so/cli@0.16.11` のように実 package 名へcomplete SemVer pinを付けます。以下の例の `kyoso` は、すでにインストールされた executable の省略形です。Naming note: npm パッケージは `@kyo-so/cli` (製品名 Kyo-so に対応)、package-runner の alias は `kyoso-cli`、インストールされる CLI コマンドは短い `kyoso` です。
 
 alias 導入前に書かれた登録は引き続きサポートされ、`current` として分類されます。npx が利用可能な npx 登録は `ready` のままですが、bunx 登録は setup が必要な Bun capability を検証するまで `unverified` のままです。`kyoso doctor` は alias が無いことを警告して書き換え先の spec を示します。setup はこの登録を保持するため、修復は手動編集になります。
 

package/README.md

@@ -152,7 +152,7 @@ Manual setup examples are kept in `examples/codex-config.toml` and `examples/cla
 
 ## CLI
 
-The package-runner execution paths install the npm package under the local alias `kyoso-cli`: `npx -y --package=kyoso-cli@npm:@kyo-so/cli kyoso` and `bunx --package kyoso-cli@npm:@kyo-so/cli kyoso`. Both forms select the package and the executable separately, so neither relies on binary inference from a multi-bin package, and the alias prevents a checkout whose own package name is `@kyo-so/cli` from shadowing the published package. Add a complete SemVer pin after the real package name when a workflow needs one, for example `kyoso-cli@npm:@kyo-so/cli@0.16.10`. The examples below abbreviate an already installed executable as `kyoso`. Naming note: the npm package is `@kyo-so/cli` (matching the product name Kyo-so), the package-runner alias is `kyoso-cli`, and the installed CLI command is the shorter `kyoso`.
+The package-runner execution paths install the npm package under the local alias `kyoso-cli`: `npx -y --package=kyoso-cli@npm:@kyo-so/cli kyoso` and `bunx --package kyoso-cli@npm:@kyo-so/cli kyoso`. Both forms select the package and the executable separately, so neither relies on binary inference from a multi-bin package, and the alias prevents a checkout whose own package name is `@kyo-so/cli` from shadowing the published package. Add a complete SemVer pin after the real package name when a workflow needs one, for example `kyoso-cli@npm:@kyo-so/cli@0.16.11`. The examples below abbreviate an already installed executable as `kyoso`. Naming note: the npm package is `@kyo-so/cli` (matching the product name Kyo-so), the package-runner alias is `kyoso-cli`, and the installed CLI command is the shorter `kyoso`.
 
 Registrations written before the alias remain supported and classified as `current`. An available npx registration remains `ready`; a bunx registration remains `unverified` until its Bun capability is verified by setup. `kyoso doctor` warns that the alias is missing and names the spec to write; setup preserves such an entry, so that repair is a hand edit.
 

package/README.zh-CN.md

@@ -154,7 +154,7 @@ Use Kyoso diff_review on the current diff. I need a second opinion before mergin
 
 ## CLI
 
-package-runner 执行路径会把 npm package 安装为本地 alias `kyoso-cli`：`npx -y --package=kyoso-cli@npm:@kyo-so/cli kyoso` 与 `bunx --package kyoso-cli@npm:@kyo-so/cli kyoso`。两种形式都分别指定 package 和 executable，因此都不依赖 multi-bin package 的 binary 推断；alias 还能防止 package 名同为 `@kyo-so/cli` 的 checkout 遮蔽已发布的 package。需要固定 workflow 时，在真实 package 名后加 complete SemVer pin，例如 `kyoso-cli@npm:@kyo-so/cli@0.16.10`。下面的示例把已安装 executable 简写为 `kyoso`。Naming note: npm package 是 `@kyo-so/cli` (对应产品名 Kyo-so)，package-runner alias 是 `kyoso-cli`，安装后的 CLI command 是更短的 `kyoso`。
+package-runner 执行路径会把 npm package 安装为本地 alias `kyoso-cli`：`npx -y --package=kyoso-cli@npm:@kyo-so/cli kyoso` 与 `bunx --package kyoso-cli@npm:@kyo-so/cli kyoso`。两种形式都分别指定 package 和 executable，因此都不依赖 multi-bin package 的 binary 推断；alias 还能防止 package 名同为 `@kyo-so/cli` 的 checkout 遮蔽已发布的 package。需要固定 workflow 时，在真实 package 名后加 complete SemVer pin，例如 `kyoso-cli@npm:@kyo-so/cli@0.16.11`。下面的示例把已安装 executable 简写为 `kyoso`。Naming note: npm package 是 `@kyo-so/cli` (对应产品名 Kyo-so)，package-runner alias 是 `kyoso-cli`，安装后的 CLI command 是更短的 `kyoso`。
 
 alias 之前写入的注册仍然受支持，并被分类为 `current`。npx 可用时 npx 注册保持 `ready`；bunx 注册在 setup 验证其所需的 Bun capability 之前保持 `unverified`。`kyoso doctor` 会警告缺少 alias 并给出应写入的 spec；setup 会保留该 entry，因此这项修复需手动编辑。
 

package/dist/bin/kyoso.js

@@ -183966,7 +183966,7 @@ var JUDGE_MAX_OUTPUT_TOKENS = 4096;
 var RAW_OUTPUT_MAX_CHARS = 16384;
 var TRACE_DIR = ".kyoso/traces";
 var KYOSO_CHILD_AGENT = "KYOSO_CHILD_AGENT";
-var KYOSO_VERSION = "0.16.11";
+var KYOSO_VERSION = "0.16.12";
 
 // src/utils/pathContainment.ts
 import { resolve, sep as sep2 } from "node:path";
@@ -184271,7 +184271,7 @@ var defaultConfig = {
       enabled: true,
       type: "acp",
       command: "npx",
-      args: ["-y", "@agentclientprotocol/codex-acp@1.6.2"],
+      args: ["-y", "@agentclientprotocol/codex-acp@1.7.0"],
       role: "implementation_reviewer",
       timeoutMs: DEFAULT_AGENT_TIMEOUT_MS,
       allowProjectProvider: [],
@@ -187260,9 +187260,9 @@ var PLUGIN_RUNTIME_COMPATIBILITY_SCHEMA_VERSION = 2;
 var MINIMUM_SUPPORTED_CODEX_VERSION = "0.144.0-alpha.4";
 var PLUGIN_RUNTIME_EXPECTED_CONTRACT = {
   distribution: {
-    pluginVersion: "0.7.19",
+    pluginVersion: "0.7.20",
     mcpCommand: "npx",
-    mcpPackagePin: "@kyo-so/cli@0.16.10",
+    mcpPackagePin: "@kyo-so/cli@0.16.11",
     mcpExecutable: "kyoso"
   },
   marketplace: {

package/dist/cli/pluginRuntimeContract.d.ts

@@ -10,9 +10,9 @@ export declare const PLUGIN_RUNTIME_COMPATIBILITY_SCHEMA_VERSION = 2;
 export declare const MINIMUM_SUPPORTED_CODEX_VERSION = "0.144.0-alpha.4";
 export declare const PLUGIN_RUNTIME_EXPECTED_CONTRACT: {
     readonly distribution: {
-        readonly pluginVersion: "0.7.19";
+        readonly pluginVersion: "0.7.20";
         readonly mcpCommand: "npx";
-        readonly mcpPackagePin: "@kyo-so/cli@0.16.10";
+        readonly mcpPackagePin: "@kyo-so/cli@0.16.11";
         readonly mcpExecutable: "kyoso";
     };
     readonly marketplace: {
@@ -131,9 +131,9 @@ export declare const pluginRuntimeContract: {
     readonly pluginListTopLevelKeys: readonly ["installed", "available"];
     readonly expectedContract: {
         readonly distribution: {
-            readonly pluginVersion: "0.7.19";
+            readonly pluginVersion: "0.7.20";
             readonly mcpCommand: "npx";
-            readonly mcpPackagePin: "@kyo-so/cli@0.16.10";
+            readonly mcpPackagePin: "@kyo-so/cli@0.16.11";
             readonly mcpExecutable: "kyoso";
         };
         readonly marketplace: {

package/dist/core/constants.d.ts

@@ -7,4 +7,4 @@ export declare const JUDGE_MAX_OUTPUT_TOKENS = 4096;
 export declare const RAW_OUTPUT_MAX_CHARS = 16384;
 export declare const TRACE_DIR = ".kyoso/traces";
 export declare const KYOSO_CHILD_AGENT = "KYOSO_CHILD_AGENT";
-export declare const KYOSO_VERSION = "0.16.11";
+export declare const KYOSO_VERSION = "0.16.12";

package/dist/index.js

@@ -184184,7 +184184,7 @@ var defaultConfig = {
       enabled: true,
       type: "acp",
       command: "npx",
-      args: ["-y", "@agentclientprotocol/codex-acp@1.6.2"],
+      args: ["-y", "@agentclientprotocol/codex-acp@1.7.0"],
       role: "implementation_reviewer",
       timeoutMs: DEFAULT_AGENT_TIMEOUT_MS,
       allowProjectProvider: [],

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@kyo-so/cli",
-  "version": "0.16.11",
+  "version": "0.16.12",
   "description": "Kyo-so: MCP-native, ACP-powered multi-agent review gates for AI coding workflows.",
   "license": "AGPL-3.0-or-later",
   "repository": {