@kusinta/iot-schema 0.2.0-beta.1 → 0.2.0-beta.10

package/src/kusinta/iot/webrtc/v1/permission_push_pb.js

@@ -3,14 +3,14 @@
 /* eslint-disable */
 
 import { fileDesc, messageDesc } from "@bufbuild/protobuf/codegenv2";
-import { file_kusinta_iot_identity_v1_identity } from "../../identity/v1/identity_pb.js";
 import { file_kusinta_iot_access_v1_acl } from "../../access/v1/acl_pb.js";
+import { file_kusinta_iot_identity_v1_identity } from "../../identity/v1/identity_pb.js";
 
 /**
  * Describes the file kusinta/iot/webrtc/v1/permission_push.proto.
  */
 export const file_kusinta_iot_webrtc_v1_permission_push = /*@__PURE__*/
-  fileDesc("CitrdXNpbnRhL2lvdC93ZWJydGMvdjEvcGVybWlzc2lvbl9wdXNoLnByb3RvEhVrdXNpbnRhLmlvdC53ZWJydGMudjEi6QEKFExpdmVQZXJtaXNzaW9uVXBkYXRlEkQKD25ld19wZXJtaXNzaW9ucxgBIAEoCzIrLmt1c2ludGEuaW90LmFjY2Vzcy52MS5FZmZlY3RpdmVQZXJtaXNzaW9ucxI4Cg1hZGRlZF9kZXZpY2VzGAIgAygLMiEua3VzaW50YS5pb3QuaWRlbnRpdHkudjEuRGV2aWNlSWQSOgoPcmVtb3ZlZF9kZXZpY2VzGAMgAygLMiEua3VzaW50YS5pb3QuaWRlbnRpdHkudjEuRGV2aWNlSWQSFQoNY2hhbmdlX3JlYXNvbhgEIAEoCUICSAFiBnByb3RvMw", [file_kusinta_iot_identity_v1_identity, file_kusinta_iot_access_v1_acl]);
+  fileDesc("CitrdXNpbnRhL2lvdC93ZWJydGMvdjEvcGVybWlzc2lvbl9wdXNoLnByb3RvEhVrdXNpbnRhLmlvdC53ZWJydGMudjEi6QEKFExpdmVQZXJtaXNzaW9uVXBkYXRlEkQKD25ld19wZXJtaXNzaW9ucxgBIAEoCzIrLmt1c2ludGEuaW90LmFjY2Vzcy52MS5FZmZlY3RpdmVQZXJtaXNzaW9ucxI4Cg1hZGRlZF9kZXZpY2VzGAIgAygLMiEua3VzaW50YS5pb3QuaWRlbnRpdHkudjEuRGV2aWNlSWQSOgoPcmVtb3ZlZF9kZXZpY2VzGAMgAygLMiEua3VzaW50YS5pb3QuaWRlbnRpdHkudjEuRGV2aWNlSWQSFQoNY2hhbmdlX3JlYXNvbhgEIAEoCUICSAFiBnByb3RvMw", [file_kusinta_iot_access_v1_acl, file_kusinta_iot_identity_v1_identity]);
 
 /**
  * Describes the message kusinta.iot.webrtc.v1.LivePermissionUpdate.

package/src/kusinta/iot/webrtc/v1/setpoint_mode_pb.d.ts

@@ -0,0 +1,63 @@
+// @generated by protoc-gen-es v2.12.0 with parameter "target=js+dts,import_extension=js"
+// @generated from file kusinta/iot/webrtc/v1/setpoint_mode.proto (package kusinta.iot.webrtc.v1, syntax proto3)
+/* eslint-disable */
+
+import type { GenEnum, GenFile } from "@bufbuild/protobuf/codegenv2";
+
+/**
+ * Describes the file kusinta/iot/webrtc/v1/setpoint_mode.proto.
+ */
+export declare const file_kusinta_iot_webrtc_v1_setpoint_mode: GenFile;
+
+/**
+ * SetpointAdjustMode selects which setpoint a thermostat command targets. It is
+ * Matter's SetpointRaiseLowerModeEnum (Thermostat cluster 0x0201) and carries Matter's
+ * own numbering.
+ *
+ * A real type rather than a numbering written down in a comment. The mode field on
+ * ThermostatSetpointParams was a bare uint32 with this numbering stated beside it, so a
+ * consumer carrying forward an older Heat=1/Cool=2/Both=3 convention compiled cleanly and
+ * silently reversed which physical behavior a command produced.
+ *
+ * Zero is a real mode, not a "not set" sentinel — which is why there is no
+ * SETPOINT_ADJUST_MODE_UNSPECIFIED, and why every field carrying this value has explicit
+ * presence: absent = the producer stated no mode, present = the mode it named, Heat
+ * included. This is the same rule properties.proto applies to readings, for the same
+ * reason — a bare proto3 scalar makes "meant Heat" and "never set it" identical on the
+ * wire. Renumbering to free zero is not available: the wire value IS Matter's value.
+ *
+ * SetpointAdjustMode is NOT ThermostatProperties.system_mode. system_mode is Matter's
+ * SystemModeEnum (Off=0, Auto=1, Cool=3, Heat=4), a different enum over a different set
+ * of concepts. Cool is 1 here and 3 there; the two must never be substituted for each
+ * other or read through the same mapping table.
+ *
+ * @generated from enum kusinta.iot.webrtc.v1.SetpointAdjustMode
+ */
+export enum SetpointAdjustMode {
+  /**
+   * Targets ThermostatProperties.occupied_heating_setpoint.
+   *
+   * @generated from enum value: SETPOINT_ADJUST_MODE_HEAT = 0;
+   */
+  HEAT = 0,
+
+  /**
+   * Targets ThermostatProperties.occupied_cooling_setpoint.
+   *
+   * @generated from enum value: SETPOINT_ADJUST_MODE_COOL = 1;
+   */
+  COOL = 1,
+
+  /**
+   * Targets both setpoints.
+   *
+   * @generated from enum value: SETPOINT_ADJUST_MODE_BOTH = 2;
+   */
+  BOTH = 2,
+}
+
+/**
+ * Describes the enum kusinta.iot.webrtc.v1.SetpointAdjustMode.
+ */
+export declare const SetpointAdjustModeSchema: GenEnum<SetpointAdjustMode>;
+

package/src/kusinta/iot/webrtc/v1/setpoint_mode_pb.js

@@ -0,0 +1,45 @@
+// @generated by protoc-gen-es v2.12.0 with parameter "target=js+dts,import_extension=js"
+// @generated from file kusinta/iot/webrtc/v1/setpoint_mode.proto (package kusinta.iot.webrtc.v1, syntax proto3)
+/* eslint-disable */
+
+import { enumDesc, fileDesc, tsEnum } from "@bufbuild/protobuf/codegenv2";
+
+/**
+ * Describes the file kusinta/iot/webrtc/v1/setpoint_mode.proto.
+ */
+export const file_kusinta_iot_webrtc_v1_setpoint_mode = /*@__PURE__*/
+  fileDesc("CilrdXNpbnRhL2lvdC93ZWJydGMvdjEvc2V0cG9pbnRfbW9kZS5wcm90bxIVa3VzaW50YS5pb3Qud2VicnRjLnYxKnEKElNldHBvaW50QWRqdXN0TW9kZRIdChlTRVRQT0lOVF9BREpVU1RfTU9ERV9IRUFUEAASHQoZU0VUUE9JTlRfQURKVVNUX01PREVfQ09PTBABEh0KGVNFVFBPSU5UX0FESlVTVF9NT0RFX0JPVEgQAkICSAFiBnByb3RvMw");
+
+/**
+ * Describes the enum kusinta.iot.webrtc.v1.SetpointAdjustMode.
+ */
+export const SetpointAdjustModeSchema = /*@__PURE__*/
+  enumDesc(file_kusinta_iot_webrtc_v1_setpoint_mode, 0);
+
+/**
+ * SetpointAdjustMode selects which setpoint a thermostat command targets. It is
+ * Matter's SetpointRaiseLowerModeEnum (Thermostat cluster 0x0201) and carries Matter's
+ * own numbering.
+ *
+ * A real type rather than a numbering written down in a comment. The mode field on
+ * ThermostatSetpointParams was a bare uint32 with this numbering stated beside it, so a
+ * consumer carrying forward an older Heat=1/Cool=2/Both=3 convention compiled cleanly and
+ * silently reversed which physical behavior a command produced.
+ *
+ * Zero is a real mode, not a "not set" sentinel — which is why there is no
+ * SETPOINT_ADJUST_MODE_UNSPECIFIED, and why every field carrying this value has explicit
+ * presence: absent = the producer stated no mode, present = the mode it named, Heat
+ * included. This is the same rule properties.proto applies to readings, for the same
+ * reason — a bare proto3 scalar makes "meant Heat" and "never set it" identical on the
+ * wire. Renumbering to free zero is not available: the wire value IS Matter's value.
+ *
+ * SetpointAdjustMode is NOT ThermostatProperties.system_mode. system_mode is Matter's
+ * SystemModeEnum (Off=0, Auto=1, Cool=3, Heat=4), a different enum over a different set
+ * of concepts. Cool is 1 here and 3 there; the two must never be substituted for each
+ * other or read through the same mapping table.
+ *
+ * @generated from enum kusinta.iot.webrtc.v1.SetpointAdjustMode
+ */
+export const SetpointAdjustMode = /*@__PURE__*/
+  tsEnum(SetpointAdjustModeSchema);
+