@kumwe/studio-testkit 0.1.0-alpha.8 → 0.1.0-rc.1

package/fixtures/authoring-message-catalog.en.json

@@ -0,0 +1,649 @@
+{
+  "$schema": "https://schemas.kumwe.org/studio/v1/authoring-message-catalog.schema.json",
+  "kind": "authoring-message-catalog",
+  "contractVersion": "0.1-draft",
+  "catalogVersion": "1.4.0",
+  "locale": "en",
+  "messages": {
+    "studio.shell/announce-binding-removed": {
+      "defaultMessage": "Removed the {port} binding",
+      "parameters": ["port"]
+    },
+    "studio.shell/announce-binding-set": {
+      "defaultMessage": "Set the {port} binding",
+      "parameters": ["port"]
+    },
+    "studio.shell/announce-canvas-mode": {
+      "defaultMessage": "Canvas mode: {state}",
+      "parameters": ["state"]
+    },
+    "studio.shell/announce-command-failed": {
+      "defaultMessage": "Command failed: {message}",
+      "parameters": ["message"]
+    },
+    "studio.shell/announce-conflict": {
+      "defaultMessage": "The change was rejected: {message} The document is unchanged; refresh the session or undo before retrying.",
+      "parameters": ["message"]
+    },
+    "studio.shell/announce-deleted": {
+      "defaultMessage": "Deleted {label} block",
+      "parameters": ["label"]
+    },
+    "studio.shell/announce-drag-cancelled": {
+      "defaultMessage": "Reorder cancelled. {label} kept its position.",
+      "parameters": ["label"]
+    },
+    "studio.shell/announce-dropped": {
+      "defaultMessage": "Moved {label} to position {position} of {count}",
+      "parameters": ["count", "label", "position"]
+    },
+    "studio.shell/announce-duplicated": {
+      "defaultMessage": "Duplicated {label}",
+      "parameters": ["label"]
+    },
+    "studio.shell/announce-edit-cancelled": {
+      "defaultMessage": "Edit cancelled. {property} kept its value.",
+      "parameters": ["property"]
+    },
+    "studio.shell/announce-field-bound": {
+      "defaultMessage": "Bound {port} to the {field} model field",
+      "parameters": ["field", "port"]
+    },
+    "studio.shell/announce-inheritance-reset": {
+      "defaultMessage": "Reset every responsive override for {property}; all viewports now inherit the base value",
+      "parameters": ["property"]
+    },
+    "studio.shell/announce-inserted": {
+      "defaultMessage": "Inserted {label}",
+      "parameters": ["label"]
+    },
+    "studio.shell/announce-invalid-value": {
+      "defaultMessage": "The {label} value is not valid JSON. Nothing was changed.",
+      "parameters": ["label"]
+    },
+    "studio.shell/announce-moved-down": {
+      "defaultMessage": "Moved {label} down",
+      "parameters": ["label"]
+    },
+    "studio.shell/announce-moved-to": {
+      "defaultMessage": "Moved {label} to {destination}",
+      "parameters": ["destination", "label"]
+    },
+    "studio.shell/announce-moved-up": {
+      "defaultMessage": "Moved {label} up",
+      "parameters": ["label"]
+    },
+    "studio.shell/announce-name-required": {
+      "defaultMessage": "Enter a name before applying the change.",
+      "parameters": []
+    },
+    "studio.shell/announce-override-removed": {
+      "defaultMessage": "Removed the {property} override for the {viewport} viewport",
+      "parameters": ["property", "viewport"]
+    },
+    "studio.shell/announce-override-set": {
+      "defaultMessage": "Set the {property} override for the {viewport} viewport",
+      "parameters": ["property", "viewport"]
+    },
+    "studio.shell/announce-pattern-applied": {
+      "defaultMessage": "Applied the {pattern} pattern",
+      "parameters": ["pattern"]
+    },
+    "studio.shell/announce-preview-reloaded": {
+      "defaultMessage": "The preview reloaded ({reason}). The document is unchanged.",
+      "parameters": ["reason"]
+    },
+    "studio.shell/announce-preview-torn-down": {
+      "defaultMessage": "The preview closed ({reason}). The document is unchanged.",
+      "parameters": ["reason"]
+    },
+    "studio.shell/announce-property-set": {
+      "defaultMessage": "Set {property}",
+      "parameters": ["property"]
+    },
+    "studio.shell/announce-property-unset": {
+      "defaultMessage": "Unset {property}",
+      "parameters": ["property"]
+    },
+    "studio.shell/announce-recipe-applied": {
+      "defaultMessage": "Applied the {recipe} recipe",
+      "parameters": ["recipe"]
+    },
+    "studio.shell/announce-redid": {
+      "defaultMessage": "Redid change",
+      "parameters": []
+    },
+    "studio.shell/announce-restored": {
+      "defaultMessage": "Restored {label} block",
+      "parameters": ["label"]
+    },
+    "studio.shell/announce-selection-cleared": {
+      "defaultMessage": "Selection cleared",
+      "parameters": []
+    },
+    "studio.shell/announce-size-role-invalid": {
+      "defaultMessage": "The {axis} role must be a lower-case identifier such as half or full-width. Nothing was changed.",
+      "parameters": ["axis"]
+    },
+    "studio.shell/announce-size-role-removed": {
+      "defaultMessage": "Removed the {axis} role",
+      "parameters": ["axis"]
+    },
+    "studio.shell/announce-size-role-removed-viewport": {
+      "defaultMessage": "Removed the {axis} role for the {viewport} viewport",
+      "parameters": ["axis", "viewport"]
+    },
+    "studio.shell/announce-size-role-set": {
+      "defaultMessage": "Set the {axis} role to {role}",
+      "parameters": ["axis", "role"]
+    },
+    "studio.shell/announce-size-role-set-viewport": {
+      "defaultMessage": "Set the {axis} role to {role} for the {viewport} viewport",
+      "parameters": ["axis", "role", "viewport"]
+    },
+    "studio.shell/announce-undid": {
+      "defaultMessage": "Undid change",
+      "parameters": []
+    },
+    "studio.shell/announce-viewport-changed": {
+      "defaultMessage": "Previewing the {label} viewport",
+      "parameters": ["label"]
+    },
+    "studio.shell/block-actions": {
+      "defaultMessage": "Block actions",
+      "parameters": []
+    },
+    "studio.shell/breadcrumb-label": {
+      "defaultMessage": "Selection path",
+      "parameters": []
+    },
+    "studio.shell/canvas-edit-toggle": {
+      "defaultMessage": "Select and move rendered blocks",
+      "parameters": []
+    },
+    "studio.shell/canvas-empty": {
+      "defaultMessage": "Choose a block to begin composing.",
+      "parameters": []
+    },
+    "studio.shell/canvas-label": {
+      "defaultMessage": "Blueprint structure",
+      "parameters": []
+    },
+    "studio.shell/canvas-mode-editing": {
+      "defaultMessage": "selecting and moving blocks",
+      "parameters": []
+    },
+    "studio.shell/canvas-mode-interacting": {
+      "defaultMessage": "interacting with the rendered preview",
+      "parameters": []
+    },
+    "studio.shell/command-apply-pattern": {
+      "defaultMessage": "Apply pattern {pattern}",
+      "parameters": ["pattern"]
+    },
+    "studio.shell/command-clear-selection": {
+      "defaultMessage": "Clear selection",
+      "parameters": []
+    },
+    "studio.shell/command-insert": {
+      "defaultMessage": "Insert {label}",
+      "parameters": ["label"]
+    },
+    "studio.shell/command-move-to": {
+      "defaultMessage": "Move to {destination}",
+      "parameters": ["destination"]
+    },
+    "studio.shell/command-palette-empty": {
+      "defaultMessage": "No commands match the filter.",
+      "parameters": []
+    },
+    "studio.shell/command-palette-hint": {
+      "defaultMessage": "Type to filter commands. Arrow Down moves into the results, Arrow Up returns to the filter, Enter runs a command, Escape closes.",
+      "parameters": []
+    },
+    "studio.shell/command-palette-input-label": {
+      "defaultMessage": "Filter commands",
+      "parameters": []
+    },
+    "studio.shell/command-palette-label": {
+      "defaultMessage": "Command palette",
+      "parameters": []
+    },
+    "studio.shell/command-palette-results-label": {
+      "defaultMessage": "Matching commands",
+      "parameters": []
+    },
+    "studio.shell/command-palette-toggle": {
+      "defaultMessage": "Commands",
+      "parameters": []
+    },
+    "studio.shell/delete": {
+      "defaultMessage": "Delete",
+      "parameters": []
+    },
+    "studio.shell/diagnostics-empty": {
+      "defaultMessage": "No issues",
+      "parameters": []
+    },
+    "studio.shell/diagnostics-heading": {
+      "defaultMessage": "Diagnostics",
+      "parameters": []
+    },
+    "studio.shell/document-roots": {
+      "defaultMessage": "document roots",
+      "parameters": []
+    },
+    "studio.shell/drag-drop-position": {
+      "defaultMessage": "Moving {label} to position {position} of {count}",
+      "parameters": ["count", "label", "position"]
+    },
+    "studio.shell/duplicate": {
+      "defaultMessage": "Duplicate",
+      "parameters": []
+    },
+    "studio.shell/history-label": {
+      "defaultMessage": "History",
+      "parameters": []
+    },
+    "studio.shell/inspector-add-override": {
+      "defaultMessage": "Add override",
+      "parameters": []
+    },
+    "studio.shell/inspector-add-override-name-label": {
+      "defaultMessage": "Override property name",
+      "parameters": []
+    },
+    "studio.shell/inspector-add-override-value-label": {
+      "defaultMessage": "Override value as JSON",
+      "parameters": []
+    },
+    "studio.shell/inspector-add-property": {
+      "defaultMessage": "Add property",
+      "parameters": []
+    },
+    "studio.shell/inspector-add-property-name-label": {
+      "defaultMessage": "New property name",
+      "parameters": []
+    },
+    "studio.shell/inspector-add-property-value-label": {
+      "defaultMessage": "New property value as JSON",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-accepts": {
+      "defaultMessage": "Accepts {cardinality} {value-type} value",
+      "parameters": ["cardinality", "value-type"]
+    },
+    "studio.shell/inspector-binding-control-label": {
+      "defaultMessage": "Declared {control} control for {field}",
+      "parameters": ["control", "field"]
+    },
+    "studio.shell/inspector-binding-control-preview": {
+      "defaultMessage": "Control preview",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-control-unavailable": {
+      "defaultMessage": "The declared {control} control requires a host field-adapter contribution.",
+      "parameters": ["control"]
+    },
+    "studio.shell/inspector-binding-control-undeclared": {
+      "defaultMessage": "This field declares no authoring control.",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-field-placeholder": {
+      "defaultMessage": "Choose a model field",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-invalid": {
+      "defaultMessage": "This binding no longer resolves and requires migration.",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-model": {
+      "defaultMessage": "Fields from locked model {model}",
+      "parameters": ["model"]
+    },
+    "studio.shell/inspector-binding-model-mismatch": {
+      "defaultMessage": "The projected model does not match the Blueprint lock. Binding choices are disabled; see diagnostics.",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-model-unavailable": {
+      "defaultMessage": "The session advertises model reads, but no active model projection is loaded. Binding choices are disabled.",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-no-compatible-fields": {
+      "defaultMessage": "No compatible model fields",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-non-field-source": {
+      "defaultMessage": "This port uses a non-field source. Choosing a model field replaces that source explicitly.",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-port-label": {
+      "defaultMessage": "Binding port name",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-required": {
+      "defaultMessage": " (required)",
+      "parameters": []
+    },
+    "studio.shell/inspector-binding-value-label": {
+      "defaultMessage": "Binding value as JSON",
+      "parameters": []
+    },
+    "studio.shell/inspector-bindings-empty": {
+      "defaultMessage": "No bindings",
+      "parameters": []
+    },
+    "studio.shell/inspector-bindings-heading": {
+      "defaultMessage": "Bindings",
+      "parameters": []
+    },
+    "studio.shell/inspector-design-heading": {
+      "defaultMessage": "Design",
+      "parameters": []
+    },
+    "studio.shell/inspector-design-placeholder": {
+      "defaultMessage": "Choose a token",
+      "parameters": []
+    },
+    "studio.shell/inspector-design-unset": {
+      "defaultMessage": "Remove",
+      "parameters": []
+    },
+    "studio.shell/inspector-empty": {
+      "defaultMessage": "Select a block to inspect its contract.",
+      "parameters": []
+    },
+    "studio.shell/inspector-heading": {
+      "defaultMessage": "Inspector",
+      "parameters": []
+    },
+    "studio.shell/inspector-hint": {
+      "defaultMessage": "Inputs hold JSON values. Enter applies the edit, Escape reverts it.",
+      "parameters": []
+    },
+    "studio.shell/inspector-identifier": {
+      "defaultMessage": "Identifier",
+      "parameters": []
+    },
+    "studio.shell/inspector-layout-axis-block": {
+      "defaultMessage": "Block size",
+      "parameters": []
+    },
+    "studio.shell/inspector-layout-axis-inline": {
+      "defaultMessage": "Inline size",
+      "parameters": []
+    },
+    "studio.shell/inspector-layout-base-none": {
+      "defaultMessage": "Base: none",
+      "parameters": []
+    },
+    "studio.shell/inspector-layout-base-role": {
+      "defaultMessage": "Base: {role}",
+      "parameters": ["role"]
+    },
+    "studio.shell/inspector-layout-fallback-hint": {
+      "defaultMessage": "No theme size-role vocabulary is available. Enter a lower-case role identifier; Enter applies it, Escape cancels.",
+      "parameters": []
+    },
+    "studio.shell/inspector-layout-heading": {
+      "defaultMessage": "Layout",
+      "parameters": []
+    },
+    "studio.shell/inspector-layout-no-roles": {
+      "defaultMessage": "The active theme declares no size roles, so none can be assigned.",
+      "parameters": []
+    },
+    "studio.shell/inspector-layout-role-label-base": {
+      "defaultMessage": "{axis} role (base)",
+      "parameters": ["axis"]
+    },
+    "studio.shell/inspector-layout-role-label-viewport": {
+      "defaultMessage": "{axis} role override for the {viewport} viewport",
+      "parameters": ["axis", "viewport"]
+    },
+    "studio.shell/inspector-layout-role-placeholder": {
+      "defaultMessage": "Choose a role",
+      "parameters": []
+    },
+    "studio.shell/inspector-layout-unset": {
+      "defaultMessage": "Remove",
+      "parameters": []
+    },
+    "studio.shell/inspector-layout-unset-label-base": {
+      "defaultMessage": "Remove the {axis} base role",
+      "parameters": ["axis"]
+    },
+    "studio.shell/inspector-layout-unset-label-viewport": {
+      "defaultMessage": "Remove the {axis} role override for the {viewport} viewport",
+      "parameters": ["axis", "viewport"]
+    },
+    "studio.shell/inspector-override-value-label": {
+      "defaultMessage": "Override of {property} for the {viewport} viewport as JSON",
+      "parameters": ["property", "viewport"]
+    },
+    "studio.shell/inspector-overrides-empty": {
+      "defaultMessage": "No overrides for the {viewport} viewport",
+      "parameters": ["viewport"]
+    },
+    "studio.shell/inspector-overrides-heading": {
+      "defaultMessage": "Overrides for the {viewport} viewport",
+      "parameters": ["viewport"]
+    },
+    "studio.shell/inspector-properties": {
+      "defaultMessage": "Properties",
+      "parameters": []
+    },
+    "studio.shell/inspector-properties-empty": {
+      "defaultMessage": "No properties",
+      "parameters": []
+    },
+    "studio.shell/inspector-property-value-label": {
+      "defaultMessage": "Value of {property} as JSON",
+      "parameters": ["property"]
+    },
+    "studio.shell/inspector-provenance-base": {
+      "defaultMessage": "Base value",
+      "parameters": []
+    },
+    "studio.shell/inspector-provenance-inherited": {
+      "defaultMessage": "Inherited from base: {value}",
+      "parameters": ["value"]
+    },
+    "studio.shell/inspector-provenance-inherited-none": {
+      "defaultMessage": "Inherited from base: none",
+      "parameters": []
+    },
+    "studio.shell/inspector-provenance-overridden": {
+      "defaultMessage": "Overridden for the {viewport} viewport: {value}",
+      "parameters": ["value", "viewport"]
+    },
+    "studio.shell/inspector-read-only": {
+      "defaultMessage": "Editing is disabled because this session is read-only.",
+      "parameters": []
+    },
+    "studio.shell/inspector-recipe-label": {
+      "defaultMessage": "Recipe",
+      "parameters": []
+    },
+    "studio.shell/inspector-recipe-placeholder": {
+      "defaultMessage": "Choose a recipe",
+      "parameters": []
+    },
+    "studio.shell/inspector-recipes-heading": {
+      "defaultMessage": "Recipes",
+      "parameters": []
+    },
+    "studio.shell/inspector-remove-binding": {
+      "defaultMessage": "Remove",
+      "parameters": []
+    },
+    "studio.shell/inspector-remove-binding-label": {
+      "defaultMessage": "Remove the {port} binding",
+      "parameters": ["port"]
+    },
+    "studio.shell/inspector-remove-override": {
+      "defaultMessage": "Remove",
+      "parameters": []
+    },
+    "studio.shell/inspector-remove-override-label": {
+      "defaultMessage": "Remove the {property} override for the {viewport} viewport",
+      "parameters": ["property", "viewport"]
+    },
+    "studio.shell/inspector-reset-inheritance": {
+      "defaultMessage": "Reset all viewport overrides",
+      "parameters": []
+    },
+    "studio.shell/inspector-set-binding": {
+      "defaultMessage": "Set binding",
+      "parameters": []
+    },
+    "studio.shell/inspector-type": {
+      "defaultMessage": "Type",
+      "parameters": []
+    },
+    "studio.shell/inspector-unset": {
+      "defaultMessage": "Unset",
+      "parameters": []
+    },
+    "studio.shell/inspector-unset-label": {
+      "defaultMessage": "Unset {property}",
+      "parameters": ["property"]
+    },
+    "studio.shell/move-destination-label": {
+      "defaultMessage": "Move block to another position or slot",
+      "parameters": []
+    },
+    "studio.shell/move-destination-option": {
+      "defaultMessage": "{collection}, position {position} of {count}",
+      "parameters": ["collection", "count", "position"]
+    },
+    "studio.shell/move-destination-placeholder": {
+      "defaultMessage": "Choose a destination",
+      "parameters": []
+    },
+    "studio.shell/move-down": {
+      "defaultMessage": "Move down",
+      "parameters": []
+    },
+    "studio.shell/move-slot-collection": {
+      "defaultMessage": "{parent}: {slot} slot",
+      "parameters": ["parent", "slot"]
+    },
+    "studio.shell/move-up": {
+      "defaultMessage": "Move up",
+      "parameters": []
+    },
+    "studio.shell/outline-empty": {
+      "defaultMessage": "The outline lists blocks once the document has content.",
+      "parameters": []
+    },
+    "studio.shell/outline-heading": {
+      "defaultMessage": "Outline",
+      "parameters": []
+    },
+    "studio.shell/outline-hint": {
+      "defaultMessage": "Arrow keys move focus. Alt+Arrow moves the block. Delete removes it. Ctrl+D or Cmd+D duplicates it.",
+      "parameters": []
+    },
+    "studio.shell/outline-slot": {
+      "defaultMessage": "Slot: {slot}",
+      "parameters": ["slot"]
+    },
+    "studio.shell/palette-heading": {
+      "defaultMessage": "Blocks",
+      "parameters": []
+    },
+    "studio.shell/palette-label": {
+      "defaultMessage": "Block palette",
+      "parameters": []
+    },
+    "studio.shell/patterns-heading": {
+      "defaultMessage": "Patterns",
+      "parameters": []
+    },
+    "studio.shell/preview-closed": {
+      "defaultMessage": "Preview is disconnected. Editing remains available.",
+      "parameters": []
+    },
+    "studio.shell/preview-connecting": {
+      "defaultMessage": "Preview is connecting.",
+      "parameters": []
+    },
+    "studio.shell/preview-current": {
+      "defaultMessage": "Preview is current.",
+      "parameters": []
+    },
+    "studio.shell/preview-heading": {
+      "defaultMessage": "Preview",
+      "parameters": []
+    },
+    "studio.shell/preview-label": {
+      "defaultMessage": "Rendered preview",
+      "parameters": []
+    },
+    "studio.shell/preview-rendering": {
+      "defaultMessage": "Preview is updating.",
+      "parameters": []
+    },
+    "studio.shell/preview-stale": {
+      "defaultMessage": "Preview is stale. Editing remains available.",
+      "parameters": []
+    },
+    "studio.shell/preview-unavailable": {
+      "defaultMessage": "Preview is unavailable for this session. Editing remains available.",
+      "parameters": []
+    },
+    "studio.shell/redo": {
+      "defaultMessage": "Redo",
+      "parameters": []
+    },
+    "studio.shell/restore-last-deleted": {
+      "defaultMessage": "Restore last deleted block",
+      "parameters": []
+    },
+    "studio.shell/save-state-saved": {
+      "defaultMessage": "Saved",
+      "parameters": []
+    },
+    "studio.shell/save-state-unsaved": {
+      "defaultMessage": "Unsaved changes",
+      "parameters": []
+    },
+    "studio.shell/severity-blocking": {
+      "defaultMessage": "Blocking",
+      "parameters": []
+    },
+    "studio.shell/severity-error": {
+      "defaultMessage": "Error",
+      "parameters": []
+    },
+    "studio.shell/severity-information": {
+      "defaultMessage": "Information",
+      "parameters": []
+    },
+    "studio.shell/severity-warning": {
+      "defaultMessage": "Warning",
+      "parameters": []
+    },
+    "studio.shell/status-label": {
+      "defaultMessage": "Status",
+      "parameters": []
+    },
+    "studio.shell/undo": {
+      "defaultMessage": "Undo",
+      "parameters": []
+    },
+    "studio.shell/unresolved-block": {
+      "defaultMessage": "(unresolved)",
+      "parameters": []
+    },
+    "studio.shell/viewport-label": {
+      "defaultMessage": "Preview width",
+      "parameters": []
+    },
+    "studio.shell/visual-drop-target": {
+      "defaultMessage": "Moving {label} to {destination}",
+      "parameters": ["destination", "label"]
+    }
+  }
+}