@kolisachint/hoocode-tui 0.5.66 → 0.5.68

package/dist/mouse.js

@@ -0,0 +1,115 @@
+/**
+ * Mouse reporting: turning it on, and reading what comes back.
+ *
+ * ## Why the app captures the mouse at all
+ *
+ * Without mouse reporting the wheel belongs to the terminal, which scrolls its
+ * own scrollback under the app's feet. That is fine right up until the app
+ * repaints — and this renderer repaints the whole transcript whenever a line
+ * above the viewport changes — at which point the terminal snaps back to the
+ * bottom and the scroll position the reader was holding is gone. The wheel is
+ * captured so that scrolling is one thing the app decides, not a race between
+ * the app's writes and the terminal's idea of where the view should sit.
+ *
+ * The cost is real and worth naming: while reporting is on, a plain click-drag
+ * is delivered here instead of selecting text. Every terminal worth using keeps
+ * a bypass on **shift** (option on iTerm2), so selection is one modifier away
+ * rather than gone. `HOOCODE_MOUSE=0` turns the whole thing off for anyone who
+ * would rather have the drag back.
+ *
+ * ## What is enabled, and what deliberately is not
+ *
+ * - `?1000h` — button press and release, which is what carries wheel events.
+ * - `?1006h` — SGR encoding, so coordinates past column 223 survive. Terminals
+ *   that ignore it keep sending the X10 form, which `parseMouseEvent` also
+ *   reads, so a terminal without SGR degrades to "works up to column 223"
+ *   rather than to garbage on screen.
+ *
+ * `?1002h` (drag tracking) and `?1003h` (any-motion) are **not** enabled. They
+ * would deliver a motion event per cell of travel — thousands of wakeups for a
+ * gesture this app has no use for — and `?1003h` in particular fires on plain
+ * pointer movement over the window, so an idle terminal with the mouse resting
+ * over it would never stop waking the render loop.
+ */
+/** Enable button + wheel reporting, preferring SGR coordinates. */
+export const MOUSE_ENABLE = "\x1b[?1000h\x1b[?1006h";
+/** Disable in the reverse order it was enabled. */
+export const MOUSE_DISABLE = "\x1b[?1006l\x1b[?1000l";
+const SGR_PATTERN = /^\x1b\[<(\d+);(\d+);(\d+)([Mm])/;
+// X10: ESC [ M then three bytes, each its value plus 32.
+const X10_PREFIX = "\x1b[M";
+/**
+ * Whether `data` starts with a mouse report.
+ *
+ * Used to swallow reports the app does not act on. A mouse sequence that
+ * reaches a text field is typed into it — `<35;10;4M` appearing in the prompt
+ * is this check having been skipped.
+ */
+export function isMouseSequence(data) {
+    if (SGR_PATTERN.test(data))
+        return true;
+    return data.startsWith(X10_PREFIX) && data.length >= X10_PREFIX.length + 3;
+}
+/**
+ * How many bytes the leading mouse report occupies, or 0 if there is none.
+ *
+ * Reports arrive coalesced — a fast wheel spin delivers several in one read,
+ * and a keystroke can ride along behind them — so the caller peels them off one
+ * at a time rather than treating the whole chunk as a single event.
+ */
+export function mouseSequenceLength(data) {
+    const sgr = data.match(SGR_PATTERN);
+    if (sgr)
+        return sgr[0].length;
+    if (data.startsWith(X10_PREFIX) && data.length >= X10_PREFIX.length + 3) {
+        return X10_PREFIX.length + 3;
+    }
+    return 0;
+}
+function decode(flags, column, row, pressed) {
+    const shift = (flags & 4) !== 0;
+    const alt = (flags & 8) !== 0;
+    const ctrl = (flags & 16) !== 0;
+    // Bit 6 marks the wheel, and the low two bits then say which way it turned
+    // rather than which button was hit.
+    if ((flags & 64) !== 0) {
+        const direction = flags & 3;
+        const kind = direction === 0 ? "wheelUp" : direction === 1 ? "wheelDown" : direction === 2 ? "wheelLeft" : "wheelRight";
+        return { kind, button: -1, column, row, shift, alt, ctrl };
+    }
+    const button = flags & 3;
+    // X10 has no separate release code per button: button 3 *is* the release,
+    // which is why SGR's trailing `m` exists and why this has to check both.
+    if (!pressed || button === 3) {
+        return { kind: "release", button: button === 3 ? -1 : button, column, row, shift, alt, ctrl };
+    }
+    return { kind: "press", button, column, row, shift, alt, ctrl };
+}
+/**
+ * Read the mouse report at the start of `data`, or null if there is not one.
+ *
+ * Coordinates come back 1-based, exactly as the terminal sends them; callers
+ * that index into a line subtract the one themselves rather than having it
+ * subtracted here, where it would be invisible.
+ */
+export function parseMouseEvent(data) {
+    const sgr = data.match(SGR_PATTERN);
+    if (sgr) {
+        const flags = Number(sgr[1]);
+        const column = Number(sgr[2]);
+        const row = Number(sgr[3]);
+        if (!Number.isFinite(flags) || !Number.isFinite(column) || !Number.isFinite(row))
+            return null;
+        return decode(flags, column, row, sgr[4] === "M");
+    }
+    if (data.startsWith(X10_PREFIX) && data.length >= X10_PREFIX.length + 3) {
+        const flags = data.charCodeAt(X10_PREFIX.length) - 32;
+        const column = data.charCodeAt(X10_PREFIX.length + 1) - 32;
+        const row = data.charCodeAt(X10_PREFIX.length + 2) - 32;
+        if (flags < 0 || column < 0 || row < 0)
+            return null;
+        return decode(flags, column, row, true);
+    }
+    return null;
+}
+//# sourceMappingURL=mouse.js.map

package/dist/mouse.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"mouse.js","sourceRoot":"","sources":["../src/mouse.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAgCG;AAEH,mEAAmE;AACnE,MAAM,CAAC,MAAM,YAAY,GAAG,wBAAwB,CAAC;AAErD,mDAAmD;AACnD,MAAM,CAAC,MAAM,aAAa,GAAG,wBAAwB,CAAC;AAiBtD,MAAM,WAAW,GAAG,iCAAiC,CAAC;AACtD,yDAAyD;AACzD,MAAM,UAAU,GAAG,QAAQ,CAAC;AAE5B;;;;;;GAMG;AACH,MAAM,UAAU,eAAe,CAAC,IAAY,EAAW;IACtD,IAAI,WAAW,CAAC,IAAI,CAAC,IAAI,CAAC;QAAE,OAAO,IAAI,CAAC;IACxC,OAAO,IAAI,CAAC,UAAU,CAAC,UAAU,CAAC,IAAI,IAAI,CAAC,MAAM,IAAI,UAAU,CAAC,MAAM,GAAG,CAAC,CAAC;AAAA,CAC3E;AAED;;;;;;GAMG;AACH,MAAM,UAAU,mBAAmB,CAAC,IAAY,EAAU;IACzD,MAAM,GAAG,GAAG,IAAI,CAAC,KAAK,CAAC,WAAW,CAAC,CAAC;IACpC,IAAI,GAAG;QAAE,OAAO,GAAG,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC;IAC9B,IAAI,IAAI,CAAC,UAAU,CAAC,UAAU,CAAC,IAAI,IAAI,CAAC,MAAM,IAAI,UAAU,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACzE,OAAO,UAAU,CAAC,MAAM,GAAG,CAAC,CAAC;IAC9B,CAAC;IACD,OAAO,CAAC,CAAC;AAAA,CACT;AAED,SAAS,MAAM,CAAC,KAAa,EAAE,MAAc,EAAE,GAAW,EAAE,OAAgB,EAAc;IACzF,MAAM,KAAK,GAAG,CAAC,KAAK,GAAG,CAAC,CAAC,KAAK,CAAC,CAAC;IAChC,MAAM,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC,CAAC,KAAK,CAAC,CAAC;IAC9B,MAAM,IAAI,GAAG,CAAC,KAAK,GAAG,EAAE,CAAC,KAAK,CAAC,CAAC;IAEhC,2EAA2E;IAC3E,oCAAoC;IACpC,IAAI,CAAC,KAAK,GAAG,EAAE,CAAC,KAAK,CAAC,EAAE,CAAC;QACxB,MAAM,SAAS,GAAG,KAAK,GAAG,CAAC,CAAC;QAC5B,MAAM,IAAI,GACT,SAAS,KAAK,CAAC,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,SAAS,KAAK,CAAC,CAAC,CAAC,CAAC,WAAW,CAAC,CAAC,CAAC,SAAS,KAAK,CAAC,CAAC,CAAC,CAAC,WAAW,CAAC,CAAC,CAAC,YAAY,CAAC;QAC5G,OAAO,EAAE,IAAI,EAAE,MAAM,EAAE,CAAC,CAAC,EAAE,MAAM,EAAE,GAAG,EAAE,KAAK,EAAE,GAAG,EAAE,IAAI,EAAE,CAAC;IAC5D,CAAC;IAED,MAAM,MAAM,GAAG,KAAK,GAAG,CAAC,CAAC;IACzB,0EAA0E;IAC1E,yEAAyE;IACzE,IAAI,CAAC,OAAO,IAAI,MAAM,KAAK,CAAC,EAAE,CAAC;QAC9B,OAAO,EAAE,IAAI,EAAE,SAAS,EAAE,MAAM,EAAE,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,MAAM,EAAE,MAAM,EAAE,GAAG,EAAE,KAAK,EAAE,GAAG,EAAE,IAAI,EAAE,CAAC;IAC/F,CAAC;IACD,OAAO,EAAE,IAAI,EAAE,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,GAAG,EAAE,KAAK,EAAE,GAAG,EAAE,IAAI,EAAE,CAAC;AAAA,CAChE;AAED;;;;;;GAMG;AACH,MAAM,UAAU,eAAe,CAAC,IAAY,EAAqB;IAChE,MAAM,GAAG,GAAG,IAAI,CAAC,KAAK,CAAC,WAAW,CAAC,CAAC;IACpC,IAAI,GAAG,EAAE,CAAC;QACT,MAAM,KAAK,GAAG,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;QAC7B,MAAM,MAAM,GAAG,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;QAC9B,MAAM,GAAG,GAAG,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC;QAC3B,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,MAAM,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC;YAAE,OAAO,IAAI,CAAC;QAC9F,OAAO,MAAM,CAAC,KAAK,EAAE,MAAM,EAAE,GAAG,EAAE,GAAG,CAAC,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC;IACnD,CAAC;IAED,IAAI,IAAI,CAAC,UAAU,CAAC,UAAU,CAAC,IAAI,IAAI,CAAC,MAAM,IAAI,UAAU,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACzE,MAAM,KAAK,GAAG,IAAI,CAAC,UAAU,CAAC,UAAU,CAAC,MAAM,CAAC,GAAG,EAAE,CAAC;QACtD,MAAM,MAAM,GAAG,IAAI,CAAC,UAAU,CAAC,UAAU,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,EAAE,CAAC;QAC3D,MAAM,GAAG,GAAG,IAAI,CAAC,UAAU,CAAC,UAAU,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,EAAE,CAAC;QACxD,IAAI,KAAK,GAAG,CAAC,IAAI,MAAM,GAAG,CAAC,IAAI,GAAG,GAAG,CAAC;YAAE,OAAO,IAAI,CAAC;QACpD,OAAO,MAAM,CAAC,KAAK,EAAE,MAAM,EAAE,GAAG,EAAE,IAAI,CAAC,CAAC;IACzC,CAAC;IAED,OAAO,IAAI,CAAC;AAAA,CACZ","sourcesContent":["/**\n * Mouse reporting: turning it on, and reading what comes back.\n *\n * ## Why the app captures the mouse at all\n *\n * Without mouse reporting the wheel belongs to the terminal, which scrolls its\n * own scrollback under the app's feet. That is fine right up until the app\n * repaints — and this renderer repaints the whole transcript whenever a line\n * above the viewport changes — at which point the terminal snaps back to the\n * bottom and the scroll position the reader was holding is gone. The wheel is\n * captured so that scrolling is one thing the app decides, not a race between\n * the app's writes and the terminal's idea of where the view should sit.\n *\n * The cost is real and worth naming: while reporting is on, a plain click-drag\n * is delivered here instead of selecting text. Every terminal worth using keeps\n * a bypass on **shift** (option on iTerm2), so selection is one modifier away\n * rather than gone. `HOOCODE_MOUSE=0` turns the whole thing off for anyone who\n * would rather have the drag back.\n *\n * ## What is enabled, and what deliberately is not\n *\n * - `?1000h` — button press and release, which is what carries wheel events.\n * - `?1006h` — SGR encoding, so coordinates past column 223 survive. Terminals\n *   that ignore it keep sending the X10 form, which `parseMouseEvent` also\n *   reads, so a terminal without SGR degrades to \"works up to column 223\"\n *   rather than to garbage on screen.\n *\n * `?1002h` (drag tracking) and `?1003h` (any-motion) are **not** enabled. They\n * would deliver a motion event per cell of travel — thousands of wakeups for a\n * gesture this app has no use for — and `?1003h` in particular fires on plain\n * pointer movement over the window, so an idle terminal with the mouse resting\n * over it would never stop waking the render loop.\n */\n\n/** Enable button + wheel reporting, preferring SGR coordinates. */\nexport const MOUSE_ENABLE = \"\\x1b[?1000h\\x1b[?1006h\";\n\n/** Disable in the reverse order it was enabled. */\nexport const MOUSE_DISABLE = \"\\x1b[?1006l\\x1b[?1000l\";\n\nexport type MouseEventKind = \"wheelUp\" | \"wheelDown\" | \"wheelLeft\" | \"wheelRight\" | \"press\" | \"release\";\n\nexport interface MouseEvent {\n\tkind: MouseEventKind;\n\t/** 0 left, 1 middle, 2 right. -1 for wheel events, which name no button. */\n\tbutton: number;\n\t/** 1-based, as the terminal reports it. */\n\tcolumn: number;\n\t/** 1-based, as the terminal reports it. */\n\trow: number;\n\tshift: boolean;\n\talt: boolean;\n\tctrl: boolean;\n}\n\nconst SGR_PATTERN = /^\\x1b\\[<(\\d+);(\\d+);(\\d+)([Mm])/;\n// X10: ESC [ M then three bytes, each its value plus 32.\nconst X10_PREFIX = \"\\x1b[M\";\n\n/**\n * Whether `data` starts with a mouse report.\n *\n * Used to swallow reports the app does not act on. A mouse sequence that\n * reaches a text field is typed into it — `<35;10;4M` appearing in the prompt\n * is this check having been skipped.\n */\nexport function isMouseSequence(data: string): boolean {\n\tif (SGR_PATTERN.test(data)) return true;\n\treturn data.startsWith(X10_PREFIX) && data.length >= X10_PREFIX.length + 3;\n}\n\n/**\n * How many bytes the leading mouse report occupies, or 0 if there is none.\n *\n * Reports arrive coalesced — a fast wheel spin delivers several in one read,\n * and a keystroke can ride along behind them — so the caller peels them off one\n * at a time rather than treating the whole chunk as a single event.\n */\nexport function mouseSequenceLength(data: string): number {\n\tconst sgr = data.match(SGR_PATTERN);\n\tif (sgr) return sgr[0].length;\n\tif (data.startsWith(X10_PREFIX) && data.length >= X10_PREFIX.length + 3) {\n\t\treturn X10_PREFIX.length + 3;\n\t}\n\treturn 0;\n}\n\nfunction decode(flags: number, column: number, row: number, pressed: boolean): MouseEvent {\n\tconst shift = (flags & 4) !== 0;\n\tconst alt = (flags & 8) !== 0;\n\tconst ctrl = (flags & 16) !== 0;\n\n\t// Bit 6 marks the wheel, and the low two bits then say which way it turned\n\t// rather than which button was hit.\n\tif ((flags & 64) !== 0) {\n\t\tconst direction = flags & 3;\n\t\tconst kind: MouseEventKind =\n\t\t\tdirection === 0 ? \"wheelUp\" : direction === 1 ? \"wheelDown\" : direction === 2 ? \"wheelLeft\" : \"wheelRight\";\n\t\treturn { kind, button: -1, column, row, shift, alt, ctrl };\n\t}\n\n\tconst button = flags & 3;\n\t// X10 has no separate release code per button: button 3 *is* the release,\n\t// which is why SGR's trailing `m` exists and why this has to check both.\n\tif (!pressed || button === 3) {\n\t\treturn { kind: \"release\", button: button === 3 ? -1 : button, column, row, shift, alt, ctrl };\n\t}\n\treturn { kind: \"press\", button, column, row, shift, alt, ctrl };\n}\n\n/**\n * Read the mouse report at the start of `data`, or null if there is not one.\n *\n * Coordinates come back 1-based, exactly as the terminal sends them; callers\n * that index into a line subtract the one themselves rather than having it\n * subtracted here, where it would be invisible.\n */\nexport function parseMouseEvent(data: string): MouseEvent | null {\n\tconst sgr = data.match(SGR_PATTERN);\n\tif (sgr) {\n\t\tconst flags = Number(sgr[1]);\n\t\tconst column = Number(sgr[2]);\n\t\tconst row = Number(sgr[3]);\n\t\tif (!Number.isFinite(flags) || !Number.isFinite(column) || !Number.isFinite(row)) return null;\n\t\treturn decode(flags, column, row, sgr[4] === \"M\");\n\t}\n\n\tif (data.startsWith(X10_PREFIX) && data.length >= X10_PREFIX.length + 3) {\n\t\tconst flags = data.charCodeAt(X10_PREFIX.length) - 32;\n\t\tconst column = data.charCodeAt(X10_PREFIX.length + 1) - 32;\n\t\tconst row = data.charCodeAt(X10_PREFIX.length + 2) - 32;\n\t\tif (flags < 0 || column < 0 || row < 0) return null;\n\t\treturn decode(flags, column, row, true);\n\t}\n\n\treturn null;\n}\n"]}

package/dist/terminal.d.ts

@@ -23,6 +23,21 @@ export interface Terminal {
     clearScreen(): void;
     setTitle(title: string): void;
     setProgress(active: boolean): void;
+    /**
+     * Whether mouse reporting is on, so the wheel arrives as input rather than
+     * scrolling the terminal's own scrollback. False when the terminal cannot
+     * take it or `HOOCODE_MOUSE=0` turned it off.
+     */
+    get mouseReporting(): boolean;
+    /**
+     * Enter or leave the alternate screen.
+     *
+     * The alternate screen is a fixed grid with no scrollback of its own, which
+     * is exactly what a pinned viewport needs: the app addresses rows directly
+     * and nothing it writes can move the view. Leaving restores the normal
+     * screen — and the scrollback behind it — byte for byte.
+     */
+    setAlternateScreen(active: boolean): void;
 }
 /**
  * Real terminal using process.stdin/stdout
@@ -33,6 +48,8 @@ export declare class ProcessTerminal implements Terminal {
     private resizeHandler?;
     private _kittyProtocolActive;
     private _modifyOtherKeysActive;
+    private _mouseReporting;
+    private _alternateScreen;
     private stdinBuffer?;
     private stdinDataHandler?;
     private progressInterval?;
@@ -72,6 +89,19 @@ export declare class ProcessTerminal implements Terminal {
     private enableWindowsVTInput;
     drainInput(maxMs?: number, idleMs?: number): Promise<void>;
     stop(): void;
+    /**
+     * Last-resort restore, for an exit that never reached `stop()`.
+     *
+     * An uncaught throw leaves whatever modes were on, on. Bracketed paste and
+     * the Kitty protocol degrade quietly if that happens; the alternate screen
+     * does not — the user is left staring at a blank grid with their shell
+     * invisible underneath it, and mouse reporting spits `<35;10;4M` at the
+     * prompt on every twitch. `exit` handlers may only do synchronous work,
+     * which writing a few bytes to stdout is.
+     */
+    private readonly restoreOnExit;
+    get mouseReporting(): boolean;
+    setAlternateScreen(active: boolean): void;
     write(data: string): void;
     get columns(): number;
     get rows(): number;

package/dist/terminal.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"terminal.d.ts","sourceRoot":"","sources":["../src/terminal.ts"],"names":[],"mappings":"AAYA;;GAEG;AACH,MAAM,WAAW,QAAQ;IAExB,KAAK,CAAC,OAAO,EAAE,CAAC,IAAI,EAAE,MAAM,KAAK,IAAI,EAAE,QAAQ,EAAE,MAAM,IAAI,GAAG,IAAI,CAAC;IAGnE,IAAI,IAAI,IAAI,CAAC;IAEb;;;;;OAKG;IACH,UAAU,CAAC,KAAK,CAAC,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,MAAM,GAAG,OAAO,CAAC,IAAI,CAAC,CAAC;IAG3D,KAAK,CAAC,IAAI,EAAE,MAAM,GAAG,IAAI,CAAC;IAG1B,IAAI,OAAO,IAAI,MAAM,CAAC;IACtB,IAAI,IAAI,IAAI,MAAM,CAAC;IAGnB,IAAI,mBAAmB,IAAI,OAAO,CAAC;IAGnC,MAAM,CAAC,KAAK,EAAE,MAAM,GAAG,IAAI,CAAC;IAG5B,UAAU,IAAI,IAAI,CAAC;IACnB,UAAU,IAAI,IAAI,CAAC;IAGnB,SAAS,IAAI,IAAI,CAAC;IAClB,eAAe,IAAI,IAAI,CAAC;IACxB,WAAW,IAAI,IAAI,CAAC;IAGpB,QAAQ,CAAC,KAAK,EAAE,MAAM,GAAG,IAAI,CAAC;IAG9B,WAAW,CAAC,MAAM,EAAE,OAAO,GAAG,IAAI,CAAC;CACnC;AAED;;GAEG;AACH,qBAAa,eAAgB,YAAW,QAAQ;IAC/C,OAAO,CAAC,MAAM,CAAS;IACvB,OAAO,CAAC,YAAY,CAAC,CAAyB;IAC9C,OAAO,CAAC,aAAa,CAAC,CAAa;IACnC,OAAO,CAAC,oBAAoB,CAAS;IACrC,OAAO,CAAC,sBAAsB,CAAS;IACvC,OAAO,CAAC,WAAW,CAAC,CAAc;IAClC,OAAO,CAAC,gBAAgB,CAAC,CAAyB;IAClD,OAAO,CAAC,gBAAgB,CAAC,CAAiC;IAC1D,OAAO,CAAC,YAAY,CAaf;IAEL,IAAI,mBAAmB,IAAI,OAAO,CAEjC;IAED,KAAK,CAAC,OAAO,EAAE,CAAC,IAAI,EAAE,MAAM,KAAK,IAAI,EAAE,QAAQ,EAAE,MAAM,IAAI,GAAG,IAAI,CAkCjE;IAED;;;;;;;OAOG;IACH,OAAO,CAAC,gBAAgB;IA2CxB;;;;;;;;;;;;;OAaG;IACH,OAAO,CAAC,2BAA2B;IAYnC;;;;;OAKG;IACH,OAAO,CAAC,oBAAoB;IAuBtB,UAAU,CAAC,KAAK,SAAO,EAAE,MAAM,SAAK,GAAG,OAAO,CAAC,IAAI,CAAC,CAoCzD;IAED,IAAI,IAAI,IAAI,CA6CX;IAED,KAAK,CAAC,IAAI,EAAE,MAAM,GAAG,IAAI,CASxB;IAED,IAAI,OAAO,IAAI,MAAM,CAEpB;IAED,IAAI,IAAI,IAAI,MAAM,CAEjB;IAED,MAAM,CAAC,KAAK,EAAE,MAAM,GAAG,IAAI,CAS1B;IAED,UAAU,IAAI,IAAI,CAEjB;IAED,UAAU,IAAI,IAAI,CAEjB;IAED,SAAS,IAAI,IAAI,CAEhB;IAED,eAAe,IAAI,IAAI,CAEtB;IAED,WAAW,IAAI,IAAI,CAElB;IAED,QAAQ,CAAC,KAAK,EAAE,MAAM,GAAG,IAAI,CAG5B;IAED,WAAW,CAAC,MAAM,EAAE,OAAO,GAAG,IAAI,CAcjC;IAED,OAAO,CAAC,qBAAqB;CAM7B","sourcesContent":["import * as fs from \"node:fs\";\nimport { createRequire } from \"node:module\";\nimport * as path from \"node:path\";\nimport { setKittyProtocolActive } from \"./keys.js\";\nimport { StdinBuffer } from \"./stdin-buffer.js\";\n\nconst cjsRequire = createRequire(import.meta.url);\n\nconst TERMINAL_PROGRESS_KEEPALIVE_MS = 1000;\nconst TERMINAL_PROGRESS_ACTIVE_SEQUENCE = \"\\x1b]9;4;3\\x07\";\nconst TERMINAL_PROGRESS_CLEAR_SEQUENCE = \"\\x1b]9;4;0;\\x07\";\n\n/**\n * Minimal terminal interface for TUI\n */\nexport interface Terminal {\n\t// Start the terminal with input and resize handlers\n\tstart(onInput: (data: string) => void, onResize: () => void): void;\n\n\t// Stop the terminal and restore state\n\tstop(): void;\n\n\t/**\n\t * Drain stdin before exiting to prevent Kitty key release events from\n\t * leaking to the parent shell over slow SSH connections.\n\t * @param maxMs - Maximum time to drain (default: 1000ms)\n\t * @param idleMs - Exit early if no input arrives within this time (default: 50ms)\n\t */\n\tdrainInput(maxMs?: number, idleMs?: number): Promise<void>;\n\n\t// Write output to terminal\n\twrite(data: string): void;\n\n\t// Get terminal dimensions\n\tget columns(): number;\n\tget rows(): number;\n\n\t// Whether Kitty keyboard protocol is active\n\tget kittyProtocolActive(): boolean;\n\n\t// Cursor positioning (relative to current position)\n\tmoveBy(lines: number): void; // Move cursor up (negative) or down (positive) by N lines\n\n\t// Cursor visibility\n\thideCursor(): void; // Hide the cursor\n\tshowCursor(): void; // Show the cursor\n\n\t// Clear operations\n\tclearLine(): void; // Clear current line\n\tclearFromCursor(): void; // Clear from cursor to end of screen\n\tclearScreen(): void; // Clear entire screen and move cursor to (0,0)\n\n\t// Title operations\n\tsetTitle(title: string): void; // Set terminal window title\n\n\t// Progress indicator (OSC 9;4)\n\tsetProgress(active: boolean): void;\n}\n\n/**\n * Real terminal using process.stdin/stdout\n */\nexport class ProcessTerminal implements Terminal {\n\tprivate wasRaw = false;\n\tprivate inputHandler?: (data: string) => void;\n\tprivate resizeHandler?: () => void;\n\tprivate _kittyProtocolActive = false;\n\tprivate _modifyOtherKeysActive = false;\n\tprivate stdinBuffer?: StdinBuffer;\n\tprivate stdinDataHandler?: (data: string) => void;\n\tprivate progressInterval?: ReturnType<typeof setInterval>;\n\tprivate writeLogPath = (() => {\n\t\tconst env = process.env.HOOCODE_TUI_WRITE_LOG || \"\";\n\t\tif (!env) return \"\";\n\t\ttry {\n\t\t\tif (fs.statSync(env).isDirectory()) {\n\t\t\t\tconst now = new Date();\n\t\t\t\tconst ts = `${now.getFullYear()}-${String(now.getMonth() + 1).padStart(2, \"0\")}-${String(now.getDate()).padStart(2, \"0\")}_${String(now.getHours()).padStart(2, \"0\")}-${String(now.getMinutes()).padStart(2, \"0\")}-${String(now.getSeconds()).padStart(2, \"0\")}`;\n\t\t\t\treturn path.join(env, `tui-${ts}-${process.pid}.log`);\n\t\t\t}\n\t\t} catch {\n\t\t\t// Not an existing directory - use as-is (file path)\n\t\t}\n\t\treturn env;\n\t})();\n\n\tget kittyProtocolActive(): boolean {\n\t\treturn this._kittyProtocolActive;\n\t}\n\n\tstart(onInput: (data: string) => void, onResize: () => void): void {\n\t\tthis.inputHandler = onInput;\n\t\tthis.resizeHandler = onResize;\n\n\t\t// Save previous state and enable raw mode\n\t\tthis.wasRaw = process.stdin.isRaw || false;\n\t\tif (process.stdin.setRawMode) {\n\t\t\tprocess.stdin.setRawMode(true);\n\t\t}\n\t\tprocess.stdin.setEncoding(\"utf8\");\n\t\tprocess.stdin.resume();\n\n\t\t// Enable bracketed paste mode - terminal will wrap pastes in \\x1b[200~ ... \\x1b[201~\n\t\tprocess.stdout.write(\"\\x1b[?2004h\");\n\n\t\t// Set up resize handler immediately\n\t\tprocess.stdout.on(\"resize\", this.resizeHandler);\n\n\t\t// Refresh terminal dimensions - they may be stale after suspend/resume\n\t\t// (SIGWINCH is lost while process is stopped). Unix only.\n\t\tif (process.platform !== \"win32\") {\n\t\t\tprocess.kill(process.pid, \"SIGWINCH\");\n\t\t}\n\n\t\t// On Windows, enable ENABLE_VIRTUAL_TERMINAL_INPUT so the console sends\n\t\t// VT escape sequences (e.g. \\x1b[Z for Shift+Tab) instead of raw console\n\t\t// events that lose modifier information. Must run AFTER setRawMode(true)\n\t\t// since that resets console mode flags.\n\t\tthis.enableWindowsVTInput();\n\n\t\t// Query and enable Kitty keyboard protocol\n\t\t// The query handler intercepts input temporarily, then installs the user's handler\n\t\t// See: https://sw.kovidgoyal.net/kitty/keyboard-protocol/\n\t\tthis.queryAndEnableKittyProtocol();\n\t}\n\n\t/**\n\t * Set up StdinBuffer to split batched input into individual sequences.\n\t * This ensures components receive single events, making matchesKey/isKeyRelease work correctly.\n\t *\n\t * Also watches for Kitty protocol response and enables it when detected.\n\t * This is done here (after stdinBuffer parsing) rather than on raw stdin\n\t * to handle the case where the response arrives split across multiple events.\n\t */\n\tprivate setupStdinBuffer(): void {\n\t\tthis.stdinBuffer = new StdinBuffer({ timeout: 10 });\n\n\t\t// Kitty protocol response pattern: \\x1b[?<flags>u\n\t\tconst kittyResponsePattern = /^\\x1b\\[\\?(\\d+)u$/;\n\n\t\t// Forward individual sequences to the input handler\n\t\tthis.stdinBuffer.on(\"data\", (sequence) => {\n\t\t\t// Check for Kitty protocol response (only if not already enabled)\n\t\t\tif (!this._kittyProtocolActive) {\n\t\t\t\tconst match = sequence.match(kittyResponsePattern);\n\t\t\t\tif (match) {\n\t\t\t\t\tthis._kittyProtocolActive = true;\n\t\t\t\t\tsetKittyProtocolActive(true);\n\n\t\t\t\t\t// Enable Kitty keyboard protocol (push flags)\n\t\t\t\t\t// Flag 1 = disambiguate escape codes\n\t\t\t\t\t// Flag 2 = report event types (press/repeat/release)\n\t\t\t\t\t// Flag 4 = report alternate keys (shifted key, base layout key)\n\t\t\t\t\t// Base layout key enables shortcuts to work with non-Latin keyboard layouts\n\t\t\t\t\tprocess.stdout.write(\"\\x1b[>7u\");\n\t\t\t\t\treturn; // Don't forward protocol response to TUI\n\t\t\t\t}\n\t\t\t}\n\n\t\t\tif (this.inputHandler) {\n\t\t\t\tthis.inputHandler(sequence);\n\t\t\t}\n\t\t});\n\n\t\t// Re-wrap paste content with bracketed paste markers for existing editor handling\n\t\tthis.stdinBuffer.on(\"paste\", (content) => {\n\t\t\tif (this.inputHandler) {\n\t\t\t\tthis.inputHandler(`\\x1b[200~${content}\\x1b[201~`);\n\t\t\t}\n\t\t});\n\n\t\t// Handler that pipes stdin data through the buffer\n\t\tthis.stdinDataHandler = (data: string) => {\n\t\t\tthis.stdinBuffer!.process(data);\n\t\t};\n\t}\n\n\t/**\n\t * Query terminal for Kitty keyboard protocol support and enable if available.\n\t *\n\t * Sends CSI ? u to query current flags. If terminal responds with CSI ? <flags> u,\n\t * it supports the protocol and we enable it with CSI > 1 u.\n\t *\n\t * If no Kitty response arrives shortly after startup, fall back to enabling\n\t * xterm modifyOtherKeys mode 2. This is needed for tmux, which can forward\n\t * modified enter keys as CSI-u when extended-keys is enabled, but may not\n\t * answer the Kitty protocol query.\n\t *\n\t * The response is detected in setupStdinBuffer's data handler, which properly\n\t * handles the case where the response arrives split across multiple stdin events.\n\t */\n\tprivate queryAndEnableKittyProtocol(): void {\n\t\tthis.setupStdinBuffer();\n\t\tprocess.stdin.on(\"data\", this.stdinDataHandler!);\n\t\tprocess.stdout.write(\"\\x1b[?u\");\n\t\tsetTimeout(() => {\n\t\t\tif (!this._kittyProtocolActive && !this._modifyOtherKeysActive) {\n\t\t\t\tprocess.stdout.write(\"\\x1b[>4;2m\");\n\t\t\t\tthis._modifyOtherKeysActive = true;\n\t\t\t}\n\t\t}, 150);\n\t}\n\n\t/**\n\t * On Windows, add ENABLE_VIRTUAL_TERMINAL_INPUT (0x0200) to the stdin\n\t * console handle so the terminal sends VT sequences for modified keys\n\t * (e.g. \\x1b[Z for Shift+Tab). Without this, libuv's ReadConsoleInputW\n\t * discards modifier state and Shift+Tab arrives as plain \\t.\n\t */\n\tprivate enableWindowsVTInput(): void {\n\t\tif (process.platform !== \"win32\") return;\n\t\ttry {\n\t\t\t// Dynamic require to avoid bundling koffi's 74MB of cross-platform\n\t\t\t// native binaries into every compiled binary. Koffi is only needed\n\t\t\t// on Windows for VT input support.\n\t\t\tconst koffi = cjsRequire(\"koffi\");\n\t\t\tconst k32 = koffi.load(\"kernel32.dll\");\n\t\t\tconst GetStdHandle = k32.func(\"void* __stdcall GetStdHandle(int)\");\n\t\t\tconst GetConsoleMode = k32.func(\"bool __stdcall GetConsoleMode(void*, _Out_ uint32_t*)\");\n\t\t\tconst SetConsoleMode = k32.func(\"bool __stdcall SetConsoleMode(void*, uint32_t)\");\n\n\t\t\tconst STD_INPUT_HANDLE = -10;\n\t\t\tconst ENABLE_VIRTUAL_TERMINAL_INPUT = 0x0200;\n\t\t\tconst handle = GetStdHandle(STD_INPUT_HANDLE);\n\t\t\tconst mode = new Uint32Array(1);\n\t\t\tGetConsoleMode(handle, mode);\n\t\t\tSetConsoleMode(handle, mode[0]! | ENABLE_VIRTUAL_TERMINAL_INPUT);\n\t\t} catch {\n\t\t\t// koffi not available — Shift+Tab won't be distinguishable from Tab\n\t\t}\n\t}\n\n\tasync drainInput(maxMs = 1000, idleMs = 50): Promise<void> {\n\t\tif (this._kittyProtocolActive) {\n\t\t\t// Disable Kitty keyboard protocol first so any late key releases\n\t\t\t// do not generate new Kitty escape sequences.\n\t\t\tprocess.stdout.write(\"\\x1b[<u\");\n\t\t\tthis._kittyProtocolActive = false;\n\t\t\tsetKittyProtocolActive(false);\n\t\t}\n\t\tif (this._modifyOtherKeysActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[>4;0m\");\n\t\t\tthis._modifyOtherKeysActive = false;\n\t\t}\n\n\t\tconst previousHandler = this.inputHandler;\n\t\tthis.inputHandler = undefined;\n\n\t\tlet lastDataTime = Date.now();\n\t\tconst onData = () => {\n\t\t\tlastDataTime = Date.now();\n\t\t};\n\n\t\tprocess.stdin.on(\"data\", onData);\n\t\tconst endTime = Date.now() + maxMs;\n\n\t\ttry {\n\t\t\twhile (true) {\n\t\t\t\tconst now = Date.now();\n\t\t\t\tconst timeLeft = endTime - now;\n\t\t\t\tif (timeLeft <= 0) break;\n\t\t\t\tif (now - lastDataTime >= idleMs) break;\n\t\t\t\tawait new Promise((resolve) => setTimeout(resolve, Math.min(idleMs, timeLeft)));\n\t\t\t}\n\t\t} finally {\n\t\t\tprocess.stdin.removeListener(\"data\", onData);\n\t\t\tthis.inputHandler = previousHandler;\n\t\t}\n\t}\n\n\tstop(): void {\n\t\tif (this.clearProgressInterval()) {\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_CLEAR_SEQUENCE);\n\t\t}\n\n\t\t// Disable bracketed paste mode\n\t\tprocess.stdout.write(\"\\x1b[?2004l\");\n\n\t\t// Disable Kitty keyboard protocol if not already done by drainInput()\n\t\tif (this._kittyProtocolActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[<u\");\n\t\t\tthis._kittyProtocolActive = false;\n\t\t\tsetKittyProtocolActive(false);\n\t\t}\n\t\tif (this._modifyOtherKeysActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[>4;0m\");\n\t\t\tthis._modifyOtherKeysActive = false;\n\t\t}\n\n\t\t// Clean up StdinBuffer\n\t\tif (this.stdinBuffer) {\n\t\t\tthis.stdinBuffer.destroy();\n\t\t\tthis.stdinBuffer = undefined;\n\t\t}\n\n\t\t// Remove event handlers\n\t\tif (this.stdinDataHandler) {\n\t\t\tprocess.stdin.removeListener(\"data\", this.stdinDataHandler);\n\t\t\tthis.stdinDataHandler = undefined;\n\t\t}\n\t\tthis.inputHandler = undefined;\n\t\tif (this.resizeHandler) {\n\t\t\tprocess.stdout.removeListener(\"resize\", this.resizeHandler);\n\t\t\tthis.resizeHandler = undefined;\n\t\t}\n\n\t\t// Pause stdin to prevent any buffered input (e.g., Ctrl+D) from being\n\t\t// re-interpreted after raw mode is disabled. This fixes a race condition\n\t\t// where Ctrl+D could close the parent shell over SSH.\n\t\tprocess.stdin.pause();\n\n\t\t// Restore raw mode state\n\t\tif (process.stdin.setRawMode) {\n\t\t\tprocess.stdin.setRawMode(this.wasRaw);\n\t\t}\n\t}\n\n\twrite(data: string): void {\n\t\tprocess.stdout.write(data);\n\t\tif (this.writeLogPath) {\n\t\t\ttry {\n\t\t\t\tfs.appendFileSync(this.writeLogPath, data, { encoding: \"utf8\" });\n\t\t\t} catch {\n\t\t\t\t// Ignore logging errors\n\t\t\t}\n\t\t}\n\t}\n\n\tget columns(): number {\n\t\treturn process.stdout.columns || Number(process.env.COLUMNS) || 80;\n\t}\n\n\tget rows(): number {\n\t\treturn process.stdout.rows || Number(process.env.LINES) || 24;\n\t}\n\n\tmoveBy(lines: number): void {\n\t\tif (lines > 0) {\n\t\t\t// Move down\n\t\t\tprocess.stdout.write(`\\x1b[${lines}B`);\n\t\t} else if (lines < 0) {\n\t\t\t// Move up\n\t\t\tprocess.stdout.write(`\\x1b[${-lines}A`);\n\t\t}\n\t\t// lines === 0: no movement\n\t}\n\n\thideCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[?25l\");\n\t}\n\n\tshowCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[?25h\");\n\t}\n\n\tclearLine(): void {\n\t\tprocess.stdout.write(\"\\x1b[K\");\n\t}\n\n\tclearFromCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[J\");\n\t}\n\n\tclearScreen(): void {\n\t\tprocess.stdout.write(\"\\x1b[2J\\x1b[H\"); // Clear screen and move to home (1,1)\n\t}\n\n\tsetTitle(title: string): void {\n\t\t// OSC 0;title BEL - set terminal window title\n\t\tprocess.stdout.write(`\\x1b]0;${title}\\x07`);\n\t}\n\n\tsetProgress(active: boolean): void {\n\t\tif (active) {\n\t\t\t// OSC 9;4;3 - indeterminate progress\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_ACTIVE_SEQUENCE);\n\t\t\tif (!this.progressInterval) {\n\t\t\t\tthis.progressInterval = setInterval(() => {\n\t\t\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_ACTIVE_SEQUENCE);\n\t\t\t\t}, TERMINAL_PROGRESS_KEEPALIVE_MS);\n\t\t\t}\n\t\t} else {\n\t\t\tthis.clearProgressInterval();\n\t\t\t// OSC 9;4;0 - clear progress\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_CLEAR_SEQUENCE);\n\t\t}\n\t}\n\n\tprivate clearProgressInterval(): boolean {\n\t\tif (!this.progressInterval) return false;\n\t\tclearInterval(this.progressInterval);\n\t\tthis.progressInterval = undefined;\n\t\treturn true;\n\t}\n}\n"]}
+{"version":3,"file":"terminal.d.ts","sourceRoot":"","sources":["../src/terminal.ts"],"names":[],"mappings":"AAaA;;GAEG;AACH,MAAM,WAAW,QAAQ;IAExB,KAAK,CAAC,OAAO,EAAE,CAAC,IAAI,EAAE,MAAM,KAAK,IAAI,EAAE,QAAQ,EAAE,MAAM,IAAI,GAAG,IAAI,CAAC;IAGnE,IAAI,IAAI,IAAI,CAAC;IAEb;;;;;OAKG;IACH,UAAU,CAAC,KAAK,CAAC,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,MAAM,GAAG,OAAO,CAAC,IAAI,CAAC,CAAC;IAG3D,KAAK,CAAC,IAAI,EAAE,MAAM,GAAG,IAAI,CAAC;IAG1B,IAAI,OAAO,IAAI,MAAM,CAAC;IACtB,IAAI,IAAI,IAAI,MAAM,CAAC;IAGnB,IAAI,mBAAmB,IAAI,OAAO,CAAC;IAGnC,MAAM,CAAC,KAAK,EAAE,MAAM,GAAG,IAAI,CAAC;IAG5B,UAAU,IAAI,IAAI,CAAC;IACnB,UAAU,IAAI,IAAI,CAAC;IAGnB,SAAS,IAAI,IAAI,CAAC;IAClB,eAAe,IAAI,IAAI,CAAC;IACxB,WAAW,IAAI,IAAI,CAAC;IAGpB,QAAQ,CAAC,KAAK,EAAE,MAAM,GAAG,IAAI,CAAC;IAG9B,WAAW,CAAC,MAAM,EAAE,OAAO,GAAG,IAAI,CAAC;IAEnC;;;;OAIG;IACH,IAAI,cAAc,IAAI,OAAO,CAAC;IAE9B;;;;;;;OAOG;IACH,kBAAkB,CAAC,MAAM,EAAE,OAAO,GAAG,IAAI,CAAC;CAC1C;AAED;;GAEG;AACH,qBAAa,eAAgB,YAAW,QAAQ;IAC/C,OAAO,CAAC,MAAM,CAAS;IACvB,OAAO,CAAC,YAAY,CAAC,CAAyB;IAC9C,OAAO,CAAC,aAAa,CAAC,CAAa;IACnC,OAAO,CAAC,oBAAoB,CAAS;IACrC,OAAO,CAAC,sBAAsB,CAAS;IACvC,OAAO,CAAC,eAAe,CAAS;IAChC,OAAO,CAAC,gBAAgB,CAAS;IACjC,OAAO,CAAC,WAAW,CAAC,CAAc;IAClC,OAAO,CAAC,gBAAgB,CAAC,CAAyB;IAClD,OAAO,CAAC,gBAAgB,CAAC,CAAiC;IAC1D,OAAO,CAAC,YAAY,CAaf;IAEL,IAAI,mBAAmB,IAAI,OAAO,CAEjC;IAED,KAAK,CAAC,OAAO,EAAE,CAAC,IAAI,EAAE,MAAM,KAAK,IAAI,EAAE,QAAQ,EAAE,MAAM,IAAI,GAAG,IAAI,CA2CjE;IAED;;;;;;;OAOG;IACH,OAAO,CAAC,gBAAgB;IA2CxB;;;;;;;;;;;;;OAaG;IACH,OAAO,CAAC,2BAA2B;IAYnC;;;;;OAKG;IACH,OAAO,CAAC,oBAAoB;IAuBtB,UAAU,CAAC,KAAK,SAAO,EAAE,MAAM,SAAK,GAAG,OAAO,CAAC,IAAI,CAAC,CAoCzD;IAED,IAAI,IAAI,IAAI,CAoDX;IAED;;;;;;;;;OASG;IACH,OAAO,CAAC,QAAQ,CAAC,aAAa,CAS5B;IAEF,IAAI,cAAc,IAAI,OAAO,CAE5B;IAED,kBAAkB,CAAC,MAAM,EAAE,OAAO,GAAG,IAAI,CAOxC;IAED,KAAK,CAAC,IAAI,EAAE,MAAM,GAAG,IAAI,CASxB;IAED,IAAI,OAAO,IAAI,MAAM,CAEpB;IAED,IAAI,IAAI,IAAI,MAAM,CAEjB;IAED,MAAM,CAAC,KAAK,EAAE,MAAM,GAAG,IAAI,CAS1B;IAED,UAAU,IAAI,IAAI,CAEjB;IAED,UAAU,IAAI,IAAI,CAEjB;IAED,SAAS,IAAI,IAAI,CAEhB;IAED,eAAe,IAAI,IAAI,CAEtB;IAED,WAAW,IAAI,IAAI,CAElB;IAED,QAAQ,CAAC,KAAK,EAAE,MAAM,GAAG,IAAI,CAG5B;IAED,WAAW,CAAC,MAAM,EAAE,OAAO,GAAG,IAAI,CAcjC;IAED,OAAO,CAAC,qBAAqB;CAM7B","sourcesContent":["import * as fs from \"node:fs\";\nimport { createRequire } from \"node:module\";\nimport * as path from \"node:path\";\nimport { setKittyProtocolActive } from \"./keys.js\";\nimport { MOUSE_DISABLE, MOUSE_ENABLE } from \"./mouse.js\";\nimport { StdinBuffer } from \"./stdin-buffer.js\";\n\nconst cjsRequire = createRequire(import.meta.url);\n\nconst TERMINAL_PROGRESS_KEEPALIVE_MS = 1000;\nconst TERMINAL_PROGRESS_ACTIVE_SEQUENCE = \"\\x1b]9;4;3\\x07\";\nconst TERMINAL_PROGRESS_CLEAR_SEQUENCE = \"\\x1b]9;4;0;\\x07\";\n\n/**\n * Minimal terminal interface for TUI\n */\nexport interface Terminal {\n\t// Start the terminal with input and resize handlers\n\tstart(onInput: (data: string) => void, onResize: () => void): void;\n\n\t// Stop the terminal and restore state\n\tstop(): void;\n\n\t/**\n\t * Drain stdin before exiting to prevent Kitty key release events from\n\t * leaking to the parent shell over slow SSH connections.\n\t * @param maxMs - Maximum time to drain (default: 1000ms)\n\t * @param idleMs - Exit early if no input arrives within this time (default: 50ms)\n\t */\n\tdrainInput(maxMs?: number, idleMs?: number): Promise<void>;\n\n\t// Write output to terminal\n\twrite(data: string): void;\n\n\t// Get terminal dimensions\n\tget columns(): number;\n\tget rows(): number;\n\n\t// Whether Kitty keyboard protocol is active\n\tget kittyProtocolActive(): boolean;\n\n\t// Cursor positioning (relative to current position)\n\tmoveBy(lines: number): void; // Move cursor up (negative) or down (positive) by N lines\n\n\t// Cursor visibility\n\thideCursor(): void; // Hide the cursor\n\tshowCursor(): void; // Show the cursor\n\n\t// Clear operations\n\tclearLine(): void; // Clear current line\n\tclearFromCursor(): void; // Clear from cursor to end of screen\n\tclearScreen(): void; // Clear entire screen and move cursor to (0,0)\n\n\t// Title operations\n\tsetTitle(title: string): void; // Set terminal window title\n\n\t// Progress indicator (OSC 9;4)\n\tsetProgress(active: boolean): void;\n\n\t/**\n\t * Whether mouse reporting is on, so the wheel arrives as input rather than\n\t * scrolling the terminal's own scrollback. False when the terminal cannot\n\t * take it or `HOOCODE_MOUSE=0` turned it off.\n\t */\n\tget mouseReporting(): boolean;\n\n\t/**\n\t * Enter or leave the alternate screen.\n\t *\n\t * The alternate screen is a fixed grid with no scrollback of its own, which\n\t * is exactly what a pinned viewport needs: the app addresses rows directly\n\t * and nothing it writes can move the view. Leaving restores the normal\n\t * screen — and the scrollback behind it — byte for byte.\n\t */\n\tsetAlternateScreen(active: boolean): void;\n}\n\n/**\n * Real terminal using process.stdin/stdout\n */\nexport class ProcessTerminal implements Terminal {\n\tprivate wasRaw = false;\n\tprivate inputHandler?: (data: string) => void;\n\tprivate resizeHandler?: () => void;\n\tprivate _kittyProtocolActive = false;\n\tprivate _modifyOtherKeysActive = false;\n\tprivate _mouseReporting = false;\n\tprivate _alternateScreen = false;\n\tprivate stdinBuffer?: StdinBuffer;\n\tprivate stdinDataHandler?: (data: string) => void;\n\tprivate progressInterval?: ReturnType<typeof setInterval>;\n\tprivate writeLogPath = (() => {\n\t\tconst env = process.env.HOOCODE_TUI_WRITE_LOG || \"\";\n\t\tif (!env) return \"\";\n\t\ttry {\n\t\t\tif (fs.statSync(env).isDirectory()) {\n\t\t\t\tconst now = new Date();\n\t\t\t\tconst ts = `${now.getFullYear()}-${String(now.getMonth() + 1).padStart(2, \"0\")}-${String(now.getDate()).padStart(2, \"0\")}_${String(now.getHours()).padStart(2, \"0\")}-${String(now.getMinutes()).padStart(2, \"0\")}-${String(now.getSeconds()).padStart(2, \"0\")}`;\n\t\t\t\treturn path.join(env, `tui-${ts}-${process.pid}.log`);\n\t\t\t}\n\t\t} catch {\n\t\t\t// Not an existing directory - use as-is (file path)\n\t\t}\n\t\treturn env;\n\t})();\n\n\tget kittyProtocolActive(): boolean {\n\t\treturn this._kittyProtocolActive;\n\t}\n\n\tstart(onInput: (data: string) => void, onResize: () => void): void {\n\t\tthis.inputHandler = onInput;\n\t\tthis.resizeHandler = onResize;\n\n\t\t// Save previous state and enable raw mode\n\t\tthis.wasRaw = process.stdin.isRaw || false;\n\t\tif (process.stdin.setRawMode) {\n\t\t\tprocess.stdin.setRawMode(true);\n\t\t}\n\t\tprocess.stdin.setEncoding(\"utf8\");\n\t\tprocess.stdin.resume();\n\n\t\t// Enable bracketed paste mode - terminal will wrap pastes in \\x1b[200~ ... \\x1b[201~\n\t\tprocess.stdout.write(\"\\x1b[?2004h\");\n\n\t\t// Take the wheel. See mouse.ts for why, and for what this costs.\n\t\t// A dumb terminal has nothing to report with, and HOOCODE_MOUSE=0 hands\n\t\t// the wheel (and the un-modified drag-select) back to anyone who asks.\n\t\tif (process.env.HOOCODE_MOUSE !== \"0\" && process.env.TERM !== \"dumb\" && process.stdout.isTTY) {\n\t\t\tprocess.stdout.write(MOUSE_ENABLE);\n\t\t\tthis._mouseReporting = true;\n\t\t}\n\t\tprocess.once(\"exit\", this.restoreOnExit);\n\n\t\t// Set up resize handler immediately\n\t\tprocess.stdout.on(\"resize\", this.resizeHandler);\n\n\t\t// Refresh terminal dimensions - they may be stale after suspend/resume\n\t\t// (SIGWINCH is lost while process is stopped). Unix only.\n\t\tif (process.platform !== \"win32\") {\n\t\t\tprocess.kill(process.pid, \"SIGWINCH\");\n\t\t}\n\n\t\t// On Windows, enable ENABLE_VIRTUAL_TERMINAL_INPUT so the console sends\n\t\t// VT escape sequences (e.g. \\x1b[Z for Shift+Tab) instead of raw console\n\t\t// events that lose modifier information. Must run AFTER setRawMode(true)\n\t\t// since that resets console mode flags.\n\t\tthis.enableWindowsVTInput();\n\n\t\t// Query and enable Kitty keyboard protocol\n\t\t// The query handler intercepts input temporarily, then installs the user's handler\n\t\t// See: https://sw.kovidgoyal.net/kitty/keyboard-protocol/\n\t\tthis.queryAndEnableKittyProtocol();\n\t}\n\n\t/**\n\t * Set up StdinBuffer to split batched input into individual sequences.\n\t * This ensures components receive single events, making matchesKey/isKeyRelease work correctly.\n\t *\n\t * Also watches for Kitty protocol response and enables it when detected.\n\t * This is done here (after stdinBuffer parsing) rather than on raw stdin\n\t * to handle the case where the response arrives split across multiple events.\n\t */\n\tprivate setupStdinBuffer(): void {\n\t\tthis.stdinBuffer = new StdinBuffer({ timeout: 10 });\n\n\t\t// Kitty protocol response pattern: \\x1b[?<flags>u\n\t\tconst kittyResponsePattern = /^\\x1b\\[\\?(\\d+)u$/;\n\n\t\t// Forward individual sequences to the input handler\n\t\tthis.stdinBuffer.on(\"data\", (sequence) => {\n\t\t\t// Check for Kitty protocol response (only if not already enabled)\n\t\t\tif (!this._kittyProtocolActive) {\n\t\t\t\tconst match = sequence.match(kittyResponsePattern);\n\t\t\t\tif (match) {\n\t\t\t\t\tthis._kittyProtocolActive = true;\n\t\t\t\t\tsetKittyProtocolActive(true);\n\n\t\t\t\t\t// Enable Kitty keyboard protocol (push flags)\n\t\t\t\t\t// Flag 1 = disambiguate escape codes\n\t\t\t\t\t// Flag 2 = report event types (press/repeat/release)\n\t\t\t\t\t// Flag 4 = report alternate keys (shifted key, base layout key)\n\t\t\t\t\t// Base layout key enables shortcuts to work with non-Latin keyboard layouts\n\t\t\t\t\tprocess.stdout.write(\"\\x1b[>7u\");\n\t\t\t\t\treturn; // Don't forward protocol response to TUI\n\t\t\t\t}\n\t\t\t}\n\n\t\t\tif (this.inputHandler) {\n\t\t\t\tthis.inputHandler(sequence);\n\t\t\t}\n\t\t});\n\n\t\t// Re-wrap paste content with bracketed paste markers for existing editor handling\n\t\tthis.stdinBuffer.on(\"paste\", (content) => {\n\t\t\tif (this.inputHandler) {\n\t\t\t\tthis.inputHandler(`\\x1b[200~${content}\\x1b[201~`);\n\t\t\t}\n\t\t});\n\n\t\t// Handler that pipes stdin data through the buffer\n\t\tthis.stdinDataHandler = (data: string) => {\n\t\t\tthis.stdinBuffer!.process(data);\n\t\t};\n\t}\n\n\t/**\n\t * Query terminal for Kitty keyboard protocol support and enable if available.\n\t *\n\t * Sends CSI ? u to query current flags. If terminal responds with CSI ? <flags> u,\n\t * it supports the protocol and we enable it with CSI > 1 u.\n\t *\n\t * If no Kitty response arrives shortly after startup, fall back to enabling\n\t * xterm modifyOtherKeys mode 2. This is needed for tmux, which can forward\n\t * modified enter keys as CSI-u when extended-keys is enabled, but may not\n\t * answer the Kitty protocol query.\n\t *\n\t * The response is detected in setupStdinBuffer's data handler, which properly\n\t * handles the case where the response arrives split across multiple stdin events.\n\t */\n\tprivate queryAndEnableKittyProtocol(): void {\n\t\tthis.setupStdinBuffer();\n\t\tprocess.stdin.on(\"data\", this.stdinDataHandler!);\n\t\tprocess.stdout.write(\"\\x1b[?u\");\n\t\tsetTimeout(() => {\n\t\t\tif (!this._kittyProtocolActive && !this._modifyOtherKeysActive) {\n\t\t\t\tprocess.stdout.write(\"\\x1b[>4;2m\");\n\t\t\t\tthis._modifyOtherKeysActive = true;\n\t\t\t}\n\t\t}, 150);\n\t}\n\n\t/**\n\t * On Windows, add ENABLE_VIRTUAL_TERMINAL_INPUT (0x0200) to the stdin\n\t * console handle so the terminal sends VT sequences for modified keys\n\t * (e.g. \\x1b[Z for Shift+Tab). Without this, libuv's ReadConsoleInputW\n\t * discards modifier state and Shift+Tab arrives as plain \\t.\n\t */\n\tprivate enableWindowsVTInput(): void {\n\t\tif (process.platform !== \"win32\") return;\n\t\ttry {\n\t\t\t// Dynamic require to avoid bundling koffi's 74MB of cross-platform\n\t\t\t// native binaries into every compiled binary. Koffi is only needed\n\t\t\t// on Windows for VT input support.\n\t\t\tconst koffi = cjsRequire(\"koffi\");\n\t\t\tconst k32 = koffi.load(\"kernel32.dll\");\n\t\t\tconst GetStdHandle = k32.func(\"void* __stdcall GetStdHandle(int)\");\n\t\t\tconst GetConsoleMode = k32.func(\"bool __stdcall GetConsoleMode(void*, _Out_ uint32_t*)\");\n\t\t\tconst SetConsoleMode = k32.func(\"bool __stdcall SetConsoleMode(void*, uint32_t)\");\n\n\t\t\tconst STD_INPUT_HANDLE = -10;\n\t\t\tconst ENABLE_VIRTUAL_TERMINAL_INPUT = 0x0200;\n\t\t\tconst handle = GetStdHandle(STD_INPUT_HANDLE);\n\t\t\tconst mode = new Uint32Array(1);\n\t\t\tGetConsoleMode(handle, mode);\n\t\t\tSetConsoleMode(handle, mode[0]! | ENABLE_VIRTUAL_TERMINAL_INPUT);\n\t\t} catch {\n\t\t\t// koffi not available — Shift+Tab won't be distinguishable from Tab\n\t\t}\n\t}\n\n\tasync drainInput(maxMs = 1000, idleMs = 50): Promise<void> {\n\t\tif (this._kittyProtocolActive) {\n\t\t\t// Disable Kitty keyboard protocol first so any late key releases\n\t\t\t// do not generate new Kitty escape sequences.\n\t\t\tprocess.stdout.write(\"\\x1b[<u\");\n\t\t\tthis._kittyProtocolActive = false;\n\t\t\tsetKittyProtocolActive(false);\n\t\t}\n\t\tif (this._modifyOtherKeysActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[>4;0m\");\n\t\t\tthis._modifyOtherKeysActive = false;\n\t\t}\n\n\t\tconst previousHandler = this.inputHandler;\n\t\tthis.inputHandler = undefined;\n\n\t\tlet lastDataTime = Date.now();\n\t\tconst onData = () => {\n\t\t\tlastDataTime = Date.now();\n\t\t};\n\n\t\tprocess.stdin.on(\"data\", onData);\n\t\tconst endTime = Date.now() + maxMs;\n\n\t\ttry {\n\t\t\twhile (true) {\n\t\t\t\tconst now = Date.now();\n\t\t\t\tconst timeLeft = endTime - now;\n\t\t\t\tif (timeLeft <= 0) break;\n\t\t\t\tif (now - lastDataTime >= idleMs) break;\n\t\t\t\tawait new Promise((resolve) => setTimeout(resolve, Math.min(idleMs, timeLeft)));\n\t\t\t}\n\t\t} finally {\n\t\t\tprocess.stdin.removeListener(\"data\", onData);\n\t\t\tthis.inputHandler = previousHandler;\n\t\t}\n\t}\n\n\tstop(): void {\n\t\tif (this.clearProgressInterval()) {\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_CLEAR_SEQUENCE);\n\t\t}\n\n\t\t// Back to the normal screen and off the wheel before anything else, so\n\t\t// whatever the rest of this teardown prints lands where the user will\n\t\t// actually see it. Leaving mouse reporting on would have the shell that\n\t\t// outlives us printing `<35;10;4M` at every twitch.\n\t\tprocess.off(\"exit\", this.restoreOnExit);\n\t\tthis.restoreOnExit();\n\n\t\t// Disable bracketed paste mode\n\t\tprocess.stdout.write(\"\\x1b[?2004l\");\n\n\t\t// Disable Kitty keyboard protocol if not already done by drainInput()\n\t\tif (this._kittyProtocolActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[<u\");\n\t\t\tthis._kittyProtocolActive = false;\n\t\t\tsetKittyProtocolActive(false);\n\t\t}\n\t\tif (this._modifyOtherKeysActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[>4;0m\");\n\t\t\tthis._modifyOtherKeysActive = false;\n\t\t}\n\n\t\t// Clean up StdinBuffer\n\t\tif (this.stdinBuffer) {\n\t\t\tthis.stdinBuffer.destroy();\n\t\t\tthis.stdinBuffer = undefined;\n\t\t}\n\n\t\t// Remove event handlers\n\t\tif (this.stdinDataHandler) {\n\t\t\tprocess.stdin.removeListener(\"data\", this.stdinDataHandler);\n\t\t\tthis.stdinDataHandler = undefined;\n\t\t}\n\t\tthis.inputHandler = undefined;\n\t\tif (this.resizeHandler) {\n\t\t\tprocess.stdout.removeListener(\"resize\", this.resizeHandler);\n\t\t\tthis.resizeHandler = undefined;\n\t\t}\n\n\t\t// Pause stdin to prevent any buffered input (e.g., Ctrl+D) from being\n\t\t// re-interpreted after raw mode is disabled. This fixes a race condition\n\t\t// where Ctrl+D could close the parent shell over SSH.\n\t\tprocess.stdin.pause();\n\n\t\t// Restore raw mode state\n\t\tif (process.stdin.setRawMode) {\n\t\t\tprocess.stdin.setRawMode(this.wasRaw);\n\t\t}\n\t}\n\n\t/**\n\t * Last-resort restore, for an exit that never reached `stop()`.\n\t *\n\t * An uncaught throw leaves whatever modes were on, on. Bracketed paste and\n\t * the Kitty protocol degrade quietly if that happens; the alternate screen\n\t * does not — the user is left staring at a blank grid with their shell\n\t * invisible underneath it, and mouse reporting spits `<35;10;4M` at the\n\t * prompt on every twitch. `exit` handlers may only do synchronous work,\n\t * which writing a few bytes to stdout is.\n\t */\n\tprivate readonly restoreOnExit = (): void => {\n\t\tif (this._alternateScreen) {\n\t\t\tprocess.stdout.write(\"\\x1b[?1049l\");\n\t\t\tthis._alternateScreen = false;\n\t\t}\n\t\tif (this._mouseReporting) {\n\t\t\tprocess.stdout.write(MOUSE_DISABLE);\n\t\t\tthis._mouseReporting = false;\n\t\t}\n\t};\n\n\tget mouseReporting(): boolean {\n\t\treturn this._mouseReporting;\n\t}\n\n\tsetAlternateScreen(active: boolean): void {\n\t\tif (this._alternateScreen === active) return;\n\t\tthis._alternateScreen = active;\n\t\t// ?1049 saves and restores the cursor along with the screen, so the normal\n\t\t// screen comes back with the cursor where the app left it — which is what\n\t\t// the differential renderer's row bookkeeping assumes on the way out.\n\t\tthis.write(active ? \"\\x1b[?1049h\" : \"\\x1b[?1049l\");\n\t}\n\n\twrite(data: string): void {\n\t\tprocess.stdout.write(data);\n\t\tif (this.writeLogPath) {\n\t\t\ttry {\n\t\t\t\tfs.appendFileSync(this.writeLogPath, data, { encoding: \"utf8\" });\n\t\t\t} catch {\n\t\t\t\t// Ignore logging errors\n\t\t\t}\n\t\t}\n\t}\n\n\tget columns(): number {\n\t\treturn process.stdout.columns || Number(process.env.COLUMNS) || 80;\n\t}\n\n\tget rows(): number {\n\t\treturn process.stdout.rows || Number(process.env.LINES) || 24;\n\t}\n\n\tmoveBy(lines: number): void {\n\t\tif (lines > 0) {\n\t\t\t// Move down\n\t\t\tprocess.stdout.write(`\\x1b[${lines}B`);\n\t\t} else if (lines < 0) {\n\t\t\t// Move up\n\t\t\tprocess.stdout.write(`\\x1b[${-lines}A`);\n\t\t}\n\t\t// lines === 0: no movement\n\t}\n\n\thideCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[?25l\");\n\t}\n\n\tshowCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[?25h\");\n\t}\n\n\tclearLine(): void {\n\t\tprocess.stdout.write(\"\\x1b[K\");\n\t}\n\n\tclearFromCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[J\");\n\t}\n\n\tclearScreen(): void {\n\t\tprocess.stdout.write(\"\\x1b[2J\\x1b[H\"); // Clear screen and move to home (1,1)\n\t}\n\n\tsetTitle(title: string): void {\n\t\t// OSC 0;title BEL - set terminal window title\n\t\tprocess.stdout.write(`\\x1b]0;${title}\\x07`);\n\t}\n\n\tsetProgress(active: boolean): void {\n\t\tif (active) {\n\t\t\t// OSC 9;4;3 - indeterminate progress\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_ACTIVE_SEQUENCE);\n\t\t\tif (!this.progressInterval) {\n\t\t\t\tthis.progressInterval = setInterval(() => {\n\t\t\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_ACTIVE_SEQUENCE);\n\t\t\t\t}, TERMINAL_PROGRESS_KEEPALIVE_MS);\n\t\t\t}\n\t\t} else {\n\t\t\tthis.clearProgressInterval();\n\t\t\t// OSC 9;4;0 - clear progress\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_CLEAR_SEQUENCE);\n\t\t}\n\t}\n\n\tprivate clearProgressInterval(): boolean {\n\t\tif (!this.progressInterval) return false;\n\t\tclearInterval(this.progressInterval);\n\t\tthis.progressInterval = undefined;\n\t\treturn true;\n\t}\n}\n"]}

package/dist/terminal.js

@@ -2,6 +2,7 @@ import * as fs from "node:fs";
 import { createRequire } from "node:module";
 import * as path from "node:path";
 import { setKittyProtocolActive } from "./keys.js";
+import { MOUSE_DISABLE, MOUSE_ENABLE } from "./mouse.js";
 import { StdinBuffer } from "./stdin-buffer.js";
 const cjsRequire = createRequire(import.meta.url);
 const TERMINAL_PROGRESS_KEEPALIVE_MS = 1000;
@@ -16,6 +17,8 @@ export class ProcessTerminal {
     resizeHandler;
     _kittyProtocolActive = false;
     _modifyOtherKeysActive = false;
+    _mouseReporting = false;
+    _alternateScreen = false;
     stdinBuffer;
     stdinDataHandler;
     progressInterval;
@@ -50,6 +53,14 @@ export class ProcessTerminal {
         process.stdin.resume();
         // Enable bracketed paste mode - terminal will wrap pastes in \x1b[200~ ... \x1b[201~
         process.stdout.write("\x1b[?2004h");
+        // Take the wheel. See mouse.ts for why, and for what this costs.
+        // A dumb terminal has nothing to report with, and HOOCODE_MOUSE=0 hands
+        // the wheel (and the un-modified drag-select) back to anyone who asks.
+        if (process.env.HOOCODE_MOUSE !== "0" && process.env.TERM !== "dumb" && process.stdout.isTTY) {
+            process.stdout.write(MOUSE_ENABLE);
+            this._mouseReporting = true;
+        }
+        process.once("exit", this.restoreOnExit);
         // Set up resize handler immediately
         process.stdout.on("resize", this.resizeHandler);
         // Refresh terminal dimensions - they may be stale after suspend/resume
@@ -205,6 +216,12 @@ export class ProcessTerminal {
         if (this.clearProgressInterval()) {
             process.stdout.write(TERMINAL_PROGRESS_CLEAR_SEQUENCE);
         }
+        // Back to the normal screen and off the wheel before anything else, so
+        // whatever the rest of this teardown prints lands where the user will
+        // actually see it. Leaving mouse reporting on would have the shell that
+        // outlives us printing `<35;10;4M` at every twitch.
+        process.off("exit", this.restoreOnExit);
+        this.restoreOnExit();
         // Disable bracketed paste mode
         process.stdout.write("\x1b[?2004l");
         // Disable Kitty keyboard protocol if not already done by drainInput()
@@ -241,6 +258,38 @@ export class ProcessTerminal {
             process.stdin.setRawMode(this.wasRaw);
         }
     }
+    /**
+     * Last-resort restore, for an exit that never reached `stop()`.
+     *
+     * An uncaught throw leaves whatever modes were on, on. Bracketed paste and
+     * the Kitty protocol degrade quietly if that happens; the alternate screen
+     * does not — the user is left staring at a blank grid with their shell
+     * invisible underneath it, and mouse reporting spits `<35;10;4M` at the
+     * prompt on every twitch. `exit` handlers may only do synchronous work,
+     * which writing a few bytes to stdout is.
+     */
+    restoreOnExit = () => {
+        if (this._alternateScreen) {
+            process.stdout.write("\x1b[?1049l");
+            this._alternateScreen = false;
+        }
+        if (this._mouseReporting) {
+            process.stdout.write(MOUSE_DISABLE);
+            this._mouseReporting = false;
+        }
+    };
+    get mouseReporting() {
+        return this._mouseReporting;
+    }
+    setAlternateScreen(active) {
+        if (this._alternateScreen === active)
+            return;
+        this._alternateScreen = active;
+        // ?1049 saves and restores the cursor along with the screen, so the normal
+        // screen comes back with the cursor where the app left it — which is what
+        // the differential renderer's row bookkeeping assumes on the way out.
+        this.write(active ? "\x1b[?1049h" : "\x1b[?1049l");
+    }
     write(data) {
         process.stdout.write(data);
         if (this.writeLogPath) {

package/dist/terminal.js.map

@@ -1 +1 @@
-{"version":3,"file":"terminal.js","sourceRoot":"","sources":["../src/terminal.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,MAAM,SAAS,CAAC;AAC9B,OAAO,EAAE,aAAa,EAAE,MAAM,aAAa,CAAC;AAC5C,OAAO,KAAK,IAAI,MAAM,WAAW,CAAC;AAClC,OAAO,EAAE,sBAAsB,EAAE,MAAM,WAAW,CAAC;AACnD,OAAO,EAAE,WAAW,EAAE,MAAM,mBAAmB,CAAC;AAEhD,MAAM,UAAU,GAAG,aAAa,CAAC,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC;AAElD,MAAM,8BAA8B,GAAG,IAAI,CAAC;AAC5C,MAAM,iCAAiC,GAAG,gBAAgB,CAAC;AAC3D,MAAM,gCAAgC,GAAG,iBAAiB,CAAC;AAiD3D;;GAEG;AACH,MAAM,OAAO,eAAe;IACnB,MAAM,GAAG,KAAK,CAAC;IACf,YAAY,CAA0B;IACtC,aAAa,CAAc;IAC3B,oBAAoB,GAAG,KAAK,CAAC;IAC7B,sBAAsB,GAAG,KAAK,CAAC;IAC/B,WAAW,CAAe;IAC1B,gBAAgB,CAA0B;IAC1C,gBAAgB,CAAkC;IAClD,YAAY,GAAG,CAAC,GAAG,EAAE,CAAC;QAC7B,MAAM,GAAG,GAAG,OAAO,CAAC,GAAG,CAAC,qBAAqB,IAAI,EAAE,CAAC;QACpD,IAAI,CAAC,GAAG;YAAE,OAAO,EAAE,CAAC;QACpB,IAAI,CAAC;YACJ,IAAI,EAAE,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,WAAW,EAAE,EAAE,CAAC;gBACpC,MAAM,GAAG,GAAG,IAAI,IAAI,EAAE,CAAC;gBACvB,MAAM,EAAE,GAAG,GAAG,GAAG,CAAC,WAAW,EAAE,IAAI,MAAM,CAAC,GAAG,CAAC,QAAQ,EAAE,GAAG,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,IAAI,MAAM,CAAC,GAAG,CAAC,OAAO,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,IAAI,MAAM,CAAC,GAAG,CAAC,QAAQ,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,IAAI,MAAM,CAAC,GAAG,CAAC,UAAU,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,IAAI,MAAM,CAAC,GAAG,CAAC,UAAU,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,EAAE,CAAC;gBAChQ,OAAO,IAAI,CAAC,IAAI,CAAC,GAAG,EAAE,OAAO,EAAE,IAAI,OAAO,CAAC,GAAG,MAAM,CAAC,CAAC;YACvD,CAAC;QACF,CAAC;QAAC,MAAM,CAAC;YACR,oDAAoD;QACrD,CAAC;QACD,OAAO,GAAG,CAAC;IAAA,CACX,CAAC,EAAE,CAAC;IAEL,IAAI,mBAAmB,GAAY;QAClC,OAAO,IAAI,CAAC,oBAAoB,CAAC;IAAA,CACjC;IAED,KAAK,CAAC,OAA+B,EAAE,QAAoB,EAAQ;QAClE,IAAI,CAAC,YAAY,GAAG,OAAO,CAAC;QAC5B,IAAI,CAAC,aAAa,GAAG,QAAQ,CAAC;QAE9B,0CAA0C;QAC1C,IAAI,CAAC,MAAM,GAAG,OAAO,CAAC,KAAK,CAAC,KAAK,IAAI,KAAK,CAAC;QAC3C,IAAI,OAAO,CAAC,KAAK,CAAC,UAAU,EAAE,CAAC;YAC9B,OAAO,CAAC,KAAK,CAAC,UAAU,CAAC,IAAI,CAAC,CAAC;QAChC,CAAC;QACD,OAAO,CAAC,KAAK,CAAC,WAAW,CAAC,MAAM,CAAC,CAAC;QAClC,OAAO,CAAC,KAAK,CAAC,MAAM,EAAE,CAAC;QAEvB,qFAAqF;QACrF,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,aAAa,CAAC,CAAC;QAEpC,oCAAoC;QACpC,OAAO,CAAC,MAAM,CAAC,EAAE,CAAC,QAAQ,EAAE,IAAI,CAAC,aAAa,CAAC,CAAC;QAEhD,uEAAuE;QACvE,0DAA0D;QAC1D,IAAI,OAAO,CAAC,QAAQ,KAAK,OAAO,EAAE,CAAC;YAClC,OAAO,CAAC,IAAI,CAAC,OAAO,CAAC,GAAG,EAAE,UAAU,CAAC,CAAC;QACvC,CAAC;QAED,wEAAwE;QACxE,yEAAyE;QACzE,yEAAyE;QACzE,wCAAwC;QACxC,IAAI,CAAC,oBAAoB,EAAE,CAAC;QAE5B,2CAA2C;QAC3C,mFAAmF;QACnF,0DAA0D;QAC1D,IAAI,CAAC,2BAA2B,EAAE,CAAC;IAAA,CACnC;IAED;;;;;;;OAOG;IACK,gBAAgB,GAAS;QAChC,IAAI,CAAC,WAAW,GAAG,IAAI,WAAW,CAAC,EAAE,OAAO,EAAE,EAAE,EAAE,CAAC,CAAC;QAEpD,kDAAkD;QAClD,MAAM,oBAAoB,GAAG,kBAAkB,CAAC;QAEhD,oDAAoD;QACpD,IAAI,CAAC,WAAW,CAAC,EAAE,CAAC,MAAM,EAAE,CAAC,QAAQ,EAAE,EAAE,CAAC;YACzC,kEAAkE;YAClE,IAAI,CAAC,IAAI,CAAC,oBAAoB,EAAE,CAAC;gBAChC,MAAM,KAAK,GAAG,QAAQ,CAAC,KAAK,CAAC,oBAAoB,CAAC,CAAC;gBACnD,IAAI,KAAK,EAAE,CAAC;oBACX,IAAI,CAAC,oBAAoB,GAAG,IAAI,CAAC;oBACjC,sBAAsB,CAAC,IAAI,CAAC,CAAC;oBAE7B,8CAA8C;oBAC9C,qCAAqC;oBACrC,qDAAqD;oBACrD,gEAAgE;oBAChE,4EAA4E;oBAC5E,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,UAAU,CAAC,CAAC;oBACjC,OAAO,CAAC,yCAAyC;gBAClD,CAAC;YACF,CAAC;YAED,IAAI,IAAI,CAAC,YAAY,EAAE,CAAC;gBACvB,IAAI,CAAC,YAAY,CAAC,QAAQ,CAAC,CAAC;YAC7B,CAAC;QAAA,CACD,CAAC,CAAC;QAEH,kFAAkF;QAClF,IAAI,CAAC,WAAW,CAAC,EAAE,CAAC,OAAO,EAAE,CAAC,OAAO,EAAE,EAAE,CAAC;YACzC,IAAI,IAAI,CAAC,YAAY,EAAE,CAAC;gBACvB,IAAI,CAAC,YAAY,CAAC,YAAY,OAAO,WAAW,CAAC,CAAC;YACnD,CAAC;QAAA,CACD,CAAC,CAAC;QAEH,mDAAmD;QACnD,IAAI,CAAC,gBAAgB,GAAG,CAAC,IAAY,EAAE,EAAE,CAAC;YACzC,IAAI,CAAC,WAAY,CAAC,OAAO,CAAC,IAAI,CAAC,CAAC;QAAA,CAChC,CAAC;IAAA,CACF;IAED;;;;;;;;;;;;;OAaG;IACK,2BAA2B,GAAS;QAC3C,IAAI,CAAC,gBAAgB,EAAE,CAAC;QACxB,OAAO,CAAC,KAAK,CAAC,EAAE,CAAC,MAAM,EAAE,IAAI,CAAC,gBAAiB,CAAC,CAAC;QACjD,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,SAAS,CAAC,CAAC;QAChC,UAAU,CAAC,GAAG,EAAE,CAAC;YAChB,IAAI,CAAC,IAAI,CAAC,oBAAoB,IAAI,CAAC,IAAI,CAAC,sBAAsB,EAAE,CAAC;gBAChE,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,YAAY,CAAC,CAAC;gBACnC,IAAI,CAAC,sBAAsB,GAAG,IAAI,CAAC;YACpC,CAAC;QAAA,CACD,EAAE,GAAG,CAAC,CAAC;IAAA,CACR;IAED;;;;;OAKG;IACK,oBAAoB,GAAS;QACpC,IAAI,OAAO,CAAC,QAAQ,KAAK,OAAO;YAAE,OAAO;QACzC,IAAI,CAAC;YACJ,mEAAmE;YACnE,mEAAmE;YACnE,mCAAmC;YACnC,MAAM,KAAK,GAAG,UAAU,CAAC,OAAO,CAAC,CAAC;YAClC,MAAM,GAAG,GAAG,KAAK,CAAC,IAAI,CAAC,cAAc,CAAC,CAAC;YACvC,MAAM,YAAY,GAAG,GAAG,CAAC,IAAI,CAAC,mCAAmC,CAAC,CAAC;YACnE,MAAM,cAAc,GAAG,GAAG,CAAC,IAAI,CAAC,uDAAuD,CAAC,CAAC;YACzF,MAAM,cAAc,GAAG,GAAG,CAAC,IAAI,CAAC,gDAAgD,CAAC,CAAC;YAElF,MAAM,gBAAgB,GAAG,CAAC,EAAE,CAAC;YAC7B,MAAM,6BAA6B,GAAG,MAAM,CAAC;YAC7C,MAAM,MAAM,GAAG,YAAY,CAAC,gBAAgB,CAAC,CAAC;YAC9C,MAAM,IAAI,GAAG,IAAI,WAAW,CAAC,CAAC,CAAC,CAAC;YAChC,cAAc,CAAC,MAAM,EAAE,IAAI,CAAC,CAAC;YAC7B,cAAc,CAAC,MAAM,EAAE,IAAI,CAAC,CAAC,CAAE,GAAG,6BAA6B,CAAC,CAAC;QAClE,CAAC;QAAC,MAAM,CAAC;YACR,sEAAoE;QACrE,CAAC;IAAA,CACD;IAED,KAAK,CAAC,UAAU,CAAC,KAAK,GAAG,IAAI,EAAE,MAAM,GAAG,EAAE,EAAiB;QAC1D,IAAI,IAAI,CAAC,oBAAoB,EAAE,CAAC;YAC/B,iEAAiE;YACjE,8CAA8C;YAC9C,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,SAAS,CAAC,CAAC;YAChC,IAAI,CAAC,oBAAoB,GAAG,KAAK,CAAC;YAClC,sBAAsB,CAAC,KAAK,CAAC,CAAC;QAC/B,CAAC;QACD,IAAI,IAAI,CAAC,sBAAsB,EAAE,CAAC;YACjC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,YAAY,CAAC,CAAC;YACnC,IAAI,CAAC,sBAAsB,GAAG,KAAK,CAAC;QACrC,CAAC;QAED,MAAM,eAAe,GAAG,IAAI,CAAC,YAAY,CAAC;QAC1C,IAAI,CAAC,YAAY,GAAG,SAAS,CAAC;QAE9B,IAAI,YAAY,GAAG,IAAI,CAAC,GAAG,EAAE,CAAC;QAC9B,MAAM,MAAM,GAAG,GAAG,EAAE,CAAC;YACpB,YAAY,GAAG,IAAI,CAAC,GAAG,EAAE,CAAC;QAAA,CAC1B,CAAC;QAEF,OAAO,CAAC,KAAK,CAAC,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;QACjC,MAAM,OAAO,GAAG,IAAI,CAAC,GAAG,EAAE,GAAG,KAAK,CAAC;QAEnC,IAAI,CAAC;YACJ,OAAO,IAAI,EAAE,CAAC;gBACb,MAAM,GAAG,GAAG,IAAI,CAAC,GAAG,EAAE,CAAC;gBACvB,MAAM,QAAQ,GAAG,OAAO,GAAG,GAAG,CAAC;gBAC/B,IAAI,QAAQ,IAAI,CAAC;oBAAE,MAAM;gBACzB,IAAI,GAAG,GAAG,YAAY,IAAI,MAAM;oBAAE,MAAM;gBACxC,MAAM,IAAI,OAAO,CAAC,CAAC,OAAO,EAAE,EAAE,CAAC,UAAU,CAAC,OAAO,EAAE,IAAI,CAAC,GAAG,CAAC,MAAM,EAAE,QAAQ,CAAC,CAAC,CAAC,CAAC;YACjF,CAAC;QACF,CAAC;gBAAS,CAAC;YACV,OAAO,CAAC,KAAK,CAAC,cAAc,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;YAC7C,IAAI,CAAC,YAAY,GAAG,eAAe,CAAC;QACrC,CAAC;IAAA,CACD;IAED,IAAI,GAAS;QACZ,IAAI,IAAI,CAAC,qBAAqB,EAAE,EAAE,CAAC;YAClC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,gCAAgC,CAAC,CAAC;QACxD,CAAC;QAED,+BAA+B;QAC/B,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,aAAa,CAAC,CAAC;QAEpC,sEAAsE;QACtE,IAAI,IAAI,CAAC,oBAAoB,EAAE,CAAC;YAC/B,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,SAAS,CAAC,CAAC;YAChC,IAAI,CAAC,oBAAoB,GAAG,KAAK,CAAC;YAClC,sBAAsB,CAAC,KAAK,CAAC,CAAC;QAC/B,CAAC;QACD,IAAI,IAAI,CAAC,sBAAsB,EAAE,CAAC;YACjC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,YAAY,CAAC,CAAC;YACnC,IAAI,CAAC,sBAAsB,GAAG,KAAK,CAAC;QACrC,CAAC;QAED,uBAAuB;QACvB,IAAI,IAAI,CAAC,WAAW,EAAE,CAAC;YACtB,IAAI,CAAC,WAAW,CAAC,OAAO,EAAE,CAAC;YAC3B,IAAI,CAAC,WAAW,GAAG,SAAS,CAAC;QAC9B,CAAC;QAED,wBAAwB;QACxB,IAAI,IAAI,CAAC,gBAAgB,EAAE,CAAC;YAC3B,OAAO,CAAC,KAAK,CAAC,cAAc,CAAC,MAAM,EAAE,IAAI,CAAC,gBAAgB,CAAC,CAAC;YAC5D,IAAI,CAAC,gBAAgB,GAAG,SAAS,CAAC;QACnC,CAAC;QACD,IAAI,CAAC,YAAY,GAAG,SAAS,CAAC;QAC9B,IAAI,IAAI,CAAC,aAAa,EAAE,CAAC;YACxB,OAAO,CAAC,MAAM,CAAC,cAAc,CAAC,QAAQ,EAAE,IAAI,CAAC,aAAa,CAAC,CAAC;YAC5D,IAAI,CAAC,aAAa,GAAG,SAAS,CAAC;QAChC,CAAC;QAED,sEAAsE;QACtE,yEAAyE;QACzE,sDAAsD;QACtD,OAAO,CAAC,KAAK,CAAC,KAAK,EAAE,CAAC;QAEtB,yBAAyB;QACzB,IAAI,OAAO,CAAC,KAAK,CAAC,UAAU,EAAE,CAAC;YAC9B,OAAO,CAAC,KAAK,CAAC,UAAU,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC;QACvC,CAAC;IAAA,CACD;IAED,KAAK,CAAC,IAAY,EAAQ;QACzB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC;QAC3B,IAAI,IAAI,CAAC,YAAY,EAAE,CAAC;YACvB,IAAI,CAAC;gBACJ,EAAE,CAAC,cAAc,CAAC,IAAI,CAAC,YAAY,EAAE,IAAI,EAAE,EAAE,QAAQ,EAAE,MAAM,EAAE,CAAC,CAAC;YAClE,CAAC;YAAC,MAAM,CAAC;gBACR,wBAAwB;YACzB,CAAC;QACF,CAAC;IAAA,CACD;IAED,IAAI,OAAO,GAAW;QACrB,OAAO,OAAO,CAAC,MAAM,CAAC,OAAO,IAAI,MAAM,CAAC,OAAO,CAAC,GAAG,CAAC,OAAO,CAAC,IAAI,EAAE,CAAC;IAAA,CACnE;IAED,IAAI,IAAI,GAAW;QAClB,OAAO,OAAO,CAAC,MAAM,CAAC,IAAI,IAAI,MAAM,CAAC,OAAO,CAAC,GAAG,CAAC,KAAK,CAAC,IAAI,EAAE,CAAC;IAAA,CAC9D;IAED,MAAM,CAAC,KAAa,EAAQ;QAC3B,IAAI,KAAK,GAAG,CAAC,EAAE,CAAC;YACf,YAAY;YACZ,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,QAAQ,KAAK,GAAG,CAAC,CAAC;QACxC,CAAC;aAAM,IAAI,KAAK,GAAG,CAAC,EAAE,CAAC;YACtB,UAAU;YACV,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,QAAQ,CAAC,KAAK,GAAG,CAAC,CAAC;QACzC,CAAC;QACD,2BAA2B;IAD1B,CAED;IAED,UAAU,GAAS;QAClB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,WAAW,CAAC,CAAC;IAAA,CAClC;IAED,UAAU,GAAS;QAClB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,WAAW,CAAC,CAAC;IAAA,CAClC;IAED,SAAS,GAAS;QACjB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,QAAQ,CAAC,CAAC;IAAA,CAC/B;IAED,eAAe,GAAS;QACvB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,QAAQ,CAAC,CAAC;IAAA,CAC/B;IAED,WAAW,GAAS;QACnB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,eAAe,CAAC,CAAC,CAAC,sCAAsC;IAAvC,CACtC;IAED,QAAQ,CAAC,KAAa,EAAQ;QAC7B,8CAA8C;QAC9C,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,UAAU,KAAK,MAAM,CAAC,CAAC;IAAA,CAC5C;IAED,WAAW,CAAC,MAAe,EAAQ;QAClC,IAAI,MAAM,EAAE,CAAC;YACZ,qCAAqC;YACrC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,iCAAiC,CAAC,CAAC;YACxD,IAAI,CAAC,IAAI,CAAC,gBAAgB,EAAE,CAAC;gBAC5B,IAAI,CAAC,gBAAgB,GAAG,WAAW,CAAC,GAAG,EAAE,CAAC;oBACzC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,iCAAiC,CAAC,CAAC;gBAAA,CACxD,EAAE,8BAA8B,CAAC,CAAC;YACpC,CAAC;QACF,CAAC;aAAM,CAAC;YACP,IAAI,CAAC,qBAAqB,EAAE,CAAC;YAC7B,6BAA6B;YAC7B,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,gCAAgC,CAAC,CAAC;QACxD,CAAC;IAAA,CACD;IAEO,qBAAqB,GAAY;QACxC,IAAI,CAAC,IAAI,CAAC,gBAAgB;YAAE,OAAO,KAAK,CAAC;QACzC,aAAa,CAAC,IAAI,CAAC,gBAAgB,CAAC,CAAC;QACrC,IAAI,CAAC,gBAAgB,GAAG,SAAS,CAAC;QAClC,OAAO,IAAI,CAAC;IAAA,CACZ;CACD","sourcesContent":["import * as fs from \"node:fs\";\nimport { createRequire } from \"node:module\";\nimport * as path from \"node:path\";\nimport { setKittyProtocolActive } from \"./keys.js\";\nimport { StdinBuffer } from \"./stdin-buffer.js\";\n\nconst cjsRequire = createRequire(import.meta.url);\n\nconst TERMINAL_PROGRESS_KEEPALIVE_MS = 1000;\nconst TERMINAL_PROGRESS_ACTIVE_SEQUENCE = \"\\x1b]9;4;3\\x07\";\nconst TERMINAL_PROGRESS_CLEAR_SEQUENCE = \"\\x1b]9;4;0;\\x07\";\n\n/**\n * Minimal terminal interface for TUI\n */\nexport interface Terminal {\n\t// Start the terminal with input and resize handlers\n\tstart(onInput: (data: string) => void, onResize: () => void): void;\n\n\t// Stop the terminal and restore state\n\tstop(): void;\n\n\t/**\n\t * Drain stdin before exiting to prevent Kitty key release events from\n\t * leaking to the parent shell over slow SSH connections.\n\t * @param maxMs - Maximum time to drain (default: 1000ms)\n\t * @param idleMs - Exit early if no input arrives within this time (default: 50ms)\n\t */\n\tdrainInput(maxMs?: number, idleMs?: number): Promise<void>;\n\n\t// Write output to terminal\n\twrite(data: string): void;\n\n\t// Get terminal dimensions\n\tget columns(): number;\n\tget rows(): number;\n\n\t// Whether Kitty keyboard protocol is active\n\tget kittyProtocolActive(): boolean;\n\n\t// Cursor positioning (relative to current position)\n\tmoveBy(lines: number): void; // Move cursor up (negative) or down (positive) by N lines\n\n\t// Cursor visibility\n\thideCursor(): void; // Hide the cursor\n\tshowCursor(): void; // Show the cursor\n\n\t// Clear operations\n\tclearLine(): void; // Clear current line\n\tclearFromCursor(): void; // Clear from cursor to end of screen\n\tclearScreen(): void; // Clear entire screen and move cursor to (0,0)\n\n\t// Title operations\n\tsetTitle(title: string): void; // Set terminal window title\n\n\t// Progress indicator (OSC 9;4)\n\tsetProgress(active: boolean): void;\n}\n\n/**\n * Real terminal using process.stdin/stdout\n */\nexport class ProcessTerminal implements Terminal {\n\tprivate wasRaw = false;\n\tprivate inputHandler?: (data: string) => void;\n\tprivate resizeHandler?: () => void;\n\tprivate _kittyProtocolActive = false;\n\tprivate _modifyOtherKeysActive = false;\n\tprivate stdinBuffer?: StdinBuffer;\n\tprivate stdinDataHandler?: (data: string) => void;\n\tprivate progressInterval?: ReturnType<typeof setInterval>;\n\tprivate writeLogPath = (() => {\n\t\tconst env = process.env.HOOCODE_TUI_WRITE_LOG || \"\";\n\t\tif (!env) return \"\";\n\t\ttry {\n\t\t\tif (fs.statSync(env).isDirectory()) {\n\t\t\t\tconst now = new Date();\n\t\t\t\tconst ts = `${now.getFullYear()}-${String(now.getMonth() + 1).padStart(2, \"0\")}-${String(now.getDate()).padStart(2, \"0\")}_${String(now.getHours()).padStart(2, \"0\")}-${String(now.getMinutes()).padStart(2, \"0\")}-${String(now.getSeconds()).padStart(2, \"0\")}`;\n\t\t\t\treturn path.join(env, `tui-${ts}-${process.pid}.log`);\n\t\t\t}\n\t\t} catch {\n\t\t\t// Not an existing directory - use as-is (file path)\n\t\t}\n\t\treturn env;\n\t})();\n\n\tget kittyProtocolActive(): boolean {\n\t\treturn this._kittyProtocolActive;\n\t}\n\n\tstart(onInput: (data: string) => void, onResize: () => void): void {\n\t\tthis.inputHandler = onInput;\n\t\tthis.resizeHandler = onResize;\n\n\t\t// Save previous state and enable raw mode\n\t\tthis.wasRaw = process.stdin.isRaw || false;\n\t\tif (process.stdin.setRawMode) {\n\t\t\tprocess.stdin.setRawMode(true);\n\t\t}\n\t\tprocess.stdin.setEncoding(\"utf8\");\n\t\tprocess.stdin.resume();\n\n\t\t// Enable bracketed paste mode - terminal will wrap pastes in \\x1b[200~ ... \\x1b[201~\n\t\tprocess.stdout.write(\"\\x1b[?2004h\");\n\n\t\t// Set up resize handler immediately\n\t\tprocess.stdout.on(\"resize\", this.resizeHandler);\n\n\t\t// Refresh terminal dimensions - they may be stale after suspend/resume\n\t\t// (SIGWINCH is lost while process is stopped). Unix only.\n\t\tif (process.platform !== \"win32\") {\n\t\t\tprocess.kill(process.pid, \"SIGWINCH\");\n\t\t}\n\n\t\t// On Windows, enable ENABLE_VIRTUAL_TERMINAL_INPUT so the console sends\n\t\t// VT escape sequences (e.g. \\x1b[Z for Shift+Tab) instead of raw console\n\t\t// events that lose modifier information. Must run AFTER setRawMode(true)\n\t\t// since that resets console mode flags.\n\t\tthis.enableWindowsVTInput();\n\n\t\t// Query and enable Kitty keyboard protocol\n\t\t// The query handler intercepts input temporarily, then installs the user's handler\n\t\t// See: https://sw.kovidgoyal.net/kitty/keyboard-protocol/\n\t\tthis.queryAndEnableKittyProtocol();\n\t}\n\n\t/**\n\t * Set up StdinBuffer to split batched input into individual sequences.\n\t * This ensures components receive single events, making matchesKey/isKeyRelease work correctly.\n\t *\n\t * Also watches for Kitty protocol response and enables it when detected.\n\t * This is done here (after stdinBuffer parsing) rather than on raw stdin\n\t * to handle the case where the response arrives split across multiple events.\n\t */\n\tprivate setupStdinBuffer(): void {\n\t\tthis.stdinBuffer = new StdinBuffer({ timeout: 10 });\n\n\t\t// Kitty protocol response pattern: \\x1b[?<flags>u\n\t\tconst kittyResponsePattern = /^\\x1b\\[\\?(\\d+)u$/;\n\n\t\t// Forward individual sequences to the input handler\n\t\tthis.stdinBuffer.on(\"data\", (sequence) => {\n\t\t\t// Check for Kitty protocol response (only if not already enabled)\n\t\t\tif (!this._kittyProtocolActive) {\n\t\t\t\tconst match = sequence.match(kittyResponsePattern);\n\t\t\t\tif (match) {\n\t\t\t\t\tthis._kittyProtocolActive = true;\n\t\t\t\t\tsetKittyProtocolActive(true);\n\n\t\t\t\t\t// Enable Kitty keyboard protocol (push flags)\n\t\t\t\t\t// Flag 1 = disambiguate escape codes\n\t\t\t\t\t// Flag 2 = report event types (press/repeat/release)\n\t\t\t\t\t// Flag 4 = report alternate keys (shifted key, base layout key)\n\t\t\t\t\t// Base layout key enables shortcuts to work with non-Latin keyboard layouts\n\t\t\t\t\tprocess.stdout.write(\"\\x1b[>7u\");\n\t\t\t\t\treturn; // Don't forward protocol response to TUI\n\t\t\t\t}\n\t\t\t}\n\n\t\t\tif (this.inputHandler) {\n\t\t\t\tthis.inputHandler(sequence);\n\t\t\t}\n\t\t});\n\n\t\t// Re-wrap paste content with bracketed paste markers for existing editor handling\n\t\tthis.stdinBuffer.on(\"paste\", (content) => {\n\t\t\tif (this.inputHandler) {\n\t\t\t\tthis.inputHandler(`\\x1b[200~${content}\\x1b[201~`);\n\t\t\t}\n\t\t});\n\n\t\t// Handler that pipes stdin data through the buffer\n\t\tthis.stdinDataHandler = (data: string) => {\n\t\t\tthis.stdinBuffer!.process(data);\n\t\t};\n\t}\n\n\t/**\n\t * Query terminal for Kitty keyboard protocol support and enable if available.\n\t *\n\t * Sends CSI ? u to query current flags. If terminal responds with CSI ? <flags> u,\n\t * it supports the protocol and we enable it with CSI > 1 u.\n\t *\n\t * If no Kitty response arrives shortly after startup, fall back to enabling\n\t * xterm modifyOtherKeys mode 2. This is needed for tmux, which can forward\n\t * modified enter keys as CSI-u when extended-keys is enabled, but may not\n\t * answer the Kitty protocol query.\n\t *\n\t * The response is detected in setupStdinBuffer's data handler, which properly\n\t * handles the case where the response arrives split across multiple stdin events.\n\t */\n\tprivate queryAndEnableKittyProtocol(): void {\n\t\tthis.setupStdinBuffer();\n\t\tprocess.stdin.on(\"data\", this.stdinDataHandler!);\n\t\tprocess.stdout.write(\"\\x1b[?u\");\n\t\tsetTimeout(() => {\n\t\t\tif (!this._kittyProtocolActive && !this._modifyOtherKeysActive) {\n\t\t\t\tprocess.stdout.write(\"\\x1b[>4;2m\");\n\t\t\t\tthis._modifyOtherKeysActive = true;\n\t\t\t}\n\t\t}, 150);\n\t}\n\n\t/**\n\t * On Windows, add ENABLE_VIRTUAL_TERMINAL_INPUT (0x0200) to the stdin\n\t * console handle so the terminal sends VT sequences for modified keys\n\t * (e.g. \\x1b[Z for Shift+Tab). Without this, libuv's ReadConsoleInputW\n\t * discards modifier state and Shift+Tab arrives as plain \\t.\n\t */\n\tprivate enableWindowsVTInput(): void {\n\t\tif (process.platform !== \"win32\") return;\n\t\ttry {\n\t\t\t// Dynamic require to avoid bundling koffi's 74MB of cross-platform\n\t\t\t// native binaries into every compiled binary. Koffi is only needed\n\t\t\t// on Windows for VT input support.\n\t\t\tconst koffi = cjsRequire(\"koffi\");\n\t\t\tconst k32 = koffi.load(\"kernel32.dll\");\n\t\t\tconst GetStdHandle = k32.func(\"void* __stdcall GetStdHandle(int)\");\n\t\t\tconst GetConsoleMode = k32.func(\"bool __stdcall GetConsoleMode(void*, _Out_ uint32_t*)\");\n\t\t\tconst SetConsoleMode = k32.func(\"bool __stdcall SetConsoleMode(void*, uint32_t)\");\n\n\t\t\tconst STD_INPUT_HANDLE = -10;\n\t\t\tconst ENABLE_VIRTUAL_TERMINAL_INPUT = 0x0200;\n\t\t\tconst handle = GetStdHandle(STD_INPUT_HANDLE);\n\t\t\tconst mode = new Uint32Array(1);\n\t\t\tGetConsoleMode(handle, mode);\n\t\t\tSetConsoleMode(handle, mode[0]! | ENABLE_VIRTUAL_TERMINAL_INPUT);\n\t\t} catch {\n\t\t\t// koffi not available — Shift+Tab won't be distinguishable from Tab\n\t\t}\n\t}\n\n\tasync drainInput(maxMs = 1000, idleMs = 50): Promise<void> {\n\t\tif (this._kittyProtocolActive) {\n\t\t\t// Disable Kitty keyboard protocol first so any late key releases\n\t\t\t// do not generate new Kitty escape sequences.\n\t\t\tprocess.stdout.write(\"\\x1b[<u\");\n\t\t\tthis._kittyProtocolActive = false;\n\t\t\tsetKittyProtocolActive(false);\n\t\t}\n\t\tif (this._modifyOtherKeysActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[>4;0m\");\n\t\t\tthis._modifyOtherKeysActive = false;\n\t\t}\n\n\t\tconst previousHandler = this.inputHandler;\n\t\tthis.inputHandler = undefined;\n\n\t\tlet lastDataTime = Date.now();\n\t\tconst onData = () => {\n\t\t\tlastDataTime = Date.now();\n\t\t};\n\n\t\tprocess.stdin.on(\"data\", onData);\n\t\tconst endTime = Date.now() + maxMs;\n\n\t\ttry {\n\t\t\twhile (true) {\n\t\t\t\tconst now = Date.now();\n\t\t\t\tconst timeLeft = endTime - now;\n\t\t\t\tif (timeLeft <= 0) break;\n\t\t\t\tif (now - lastDataTime >= idleMs) break;\n\t\t\t\tawait new Promise((resolve) => setTimeout(resolve, Math.min(idleMs, timeLeft)));\n\t\t\t}\n\t\t} finally {\n\t\t\tprocess.stdin.removeListener(\"data\", onData);\n\t\t\tthis.inputHandler = previousHandler;\n\t\t}\n\t}\n\n\tstop(): void {\n\t\tif (this.clearProgressInterval()) {\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_CLEAR_SEQUENCE);\n\t\t}\n\n\t\t// Disable bracketed paste mode\n\t\tprocess.stdout.write(\"\\x1b[?2004l\");\n\n\t\t// Disable Kitty keyboard protocol if not already done by drainInput()\n\t\tif (this._kittyProtocolActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[<u\");\n\t\t\tthis._kittyProtocolActive = false;\n\t\t\tsetKittyProtocolActive(false);\n\t\t}\n\t\tif (this._modifyOtherKeysActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[>4;0m\");\n\t\t\tthis._modifyOtherKeysActive = false;\n\t\t}\n\n\t\t// Clean up StdinBuffer\n\t\tif (this.stdinBuffer) {\n\t\t\tthis.stdinBuffer.destroy();\n\t\t\tthis.stdinBuffer = undefined;\n\t\t}\n\n\t\t// Remove event handlers\n\t\tif (this.stdinDataHandler) {\n\t\t\tprocess.stdin.removeListener(\"data\", this.stdinDataHandler);\n\t\t\tthis.stdinDataHandler = undefined;\n\t\t}\n\t\tthis.inputHandler = undefined;\n\t\tif (this.resizeHandler) {\n\t\t\tprocess.stdout.removeListener(\"resize\", this.resizeHandler);\n\t\t\tthis.resizeHandler = undefined;\n\t\t}\n\n\t\t// Pause stdin to prevent any buffered input (e.g., Ctrl+D) from being\n\t\t// re-interpreted after raw mode is disabled. This fixes a race condition\n\t\t// where Ctrl+D could close the parent shell over SSH.\n\t\tprocess.stdin.pause();\n\n\t\t// Restore raw mode state\n\t\tif (process.stdin.setRawMode) {\n\t\t\tprocess.stdin.setRawMode(this.wasRaw);\n\t\t}\n\t}\n\n\twrite(data: string): void {\n\t\tprocess.stdout.write(data);\n\t\tif (this.writeLogPath) {\n\t\t\ttry {\n\t\t\t\tfs.appendFileSync(this.writeLogPath, data, { encoding: \"utf8\" });\n\t\t\t} catch {\n\t\t\t\t// Ignore logging errors\n\t\t\t}\n\t\t}\n\t}\n\n\tget columns(): number {\n\t\treturn process.stdout.columns || Number(process.env.COLUMNS) || 80;\n\t}\n\n\tget rows(): number {\n\t\treturn process.stdout.rows || Number(process.env.LINES) || 24;\n\t}\n\n\tmoveBy(lines: number): void {\n\t\tif (lines > 0) {\n\t\t\t// Move down\n\t\t\tprocess.stdout.write(`\\x1b[${lines}B`);\n\t\t} else if (lines < 0) {\n\t\t\t// Move up\n\t\t\tprocess.stdout.write(`\\x1b[${-lines}A`);\n\t\t}\n\t\t// lines === 0: no movement\n\t}\n\n\thideCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[?25l\");\n\t}\n\n\tshowCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[?25h\");\n\t}\n\n\tclearLine(): void {\n\t\tprocess.stdout.write(\"\\x1b[K\");\n\t}\n\n\tclearFromCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[J\");\n\t}\n\n\tclearScreen(): void {\n\t\tprocess.stdout.write(\"\\x1b[2J\\x1b[H\"); // Clear screen and move to home (1,1)\n\t}\n\n\tsetTitle(title: string): void {\n\t\t// OSC 0;title BEL - set terminal window title\n\t\tprocess.stdout.write(`\\x1b]0;${title}\\x07`);\n\t}\n\n\tsetProgress(active: boolean): void {\n\t\tif (active) {\n\t\t\t// OSC 9;4;3 - indeterminate progress\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_ACTIVE_SEQUENCE);\n\t\t\tif (!this.progressInterval) {\n\t\t\t\tthis.progressInterval = setInterval(() => {\n\t\t\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_ACTIVE_SEQUENCE);\n\t\t\t\t}, TERMINAL_PROGRESS_KEEPALIVE_MS);\n\t\t\t}\n\t\t} else {\n\t\t\tthis.clearProgressInterval();\n\t\t\t// OSC 9;4;0 - clear progress\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_CLEAR_SEQUENCE);\n\t\t}\n\t}\n\n\tprivate clearProgressInterval(): boolean {\n\t\tif (!this.progressInterval) return false;\n\t\tclearInterval(this.progressInterval);\n\t\tthis.progressInterval = undefined;\n\t\treturn true;\n\t}\n}\n"]}
+{"version":3,"file":"terminal.js","sourceRoot":"","sources":["../src/terminal.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,MAAM,SAAS,CAAC;AAC9B,OAAO,EAAE,aAAa,EAAE,MAAM,aAAa,CAAC;AAC5C,OAAO,KAAK,IAAI,MAAM,WAAW,CAAC;AAClC,OAAO,EAAE,sBAAsB,EAAE,MAAM,WAAW,CAAC;AACnD,OAAO,EAAE,aAAa,EAAE,YAAY,EAAE,MAAM,YAAY,CAAC;AACzD,OAAO,EAAE,WAAW,EAAE,MAAM,mBAAmB,CAAC;AAEhD,MAAM,UAAU,GAAG,aAAa,CAAC,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC;AAElD,MAAM,8BAA8B,GAAG,IAAI,CAAC;AAC5C,MAAM,iCAAiC,GAAG,gBAAgB,CAAC;AAC3D,MAAM,gCAAgC,GAAG,iBAAiB,CAAC;AAkE3D;;GAEG;AACH,MAAM,OAAO,eAAe;IACnB,MAAM,GAAG,KAAK,CAAC;IACf,YAAY,CAA0B;IACtC,aAAa,CAAc;IAC3B,oBAAoB,GAAG,KAAK,CAAC;IAC7B,sBAAsB,GAAG,KAAK,CAAC;IAC/B,eAAe,GAAG,KAAK,CAAC;IACxB,gBAAgB,GAAG,KAAK,CAAC;IACzB,WAAW,CAAe;IAC1B,gBAAgB,CAA0B;IAC1C,gBAAgB,CAAkC;IAClD,YAAY,GAAG,CAAC,GAAG,EAAE,CAAC;QAC7B,MAAM,GAAG,GAAG,OAAO,CAAC,GAAG,CAAC,qBAAqB,IAAI,EAAE,CAAC;QACpD,IAAI,CAAC,GAAG;YAAE,OAAO,EAAE,CAAC;QACpB,IAAI,CAAC;YACJ,IAAI,EAAE,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,WAAW,EAAE,EAAE,CAAC;gBACpC,MAAM,GAAG,GAAG,IAAI,IAAI,EAAE,CAAC;gBACvB,MAAM,EAAE,GAAG,GAAG,GAAG,CAAC,WAAW,EAAE,IAAI,MAAM,CAAC,GAAG,CAAC,QAAQ,EAAE,GAAG,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,IAAI,MAAM,CAAC,GAAG,CAAC,OAAO,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,IAAI,MAAM,CAAC,GAAG,CAAC,QAAQ,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,IAAI,MAAM,CAAC,GAAG,CAAC,UAAU,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,IAAI,MAAM,CAAC,GAAG,CAAC,UAAU,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,EAAE,CAAC;gBAChQ,OAAO,IAAI,CAAC,IAAI,CAAC,GAAG,EAAE,OAAO,EAAE,IAAI,OAAO,CAAC,GAAG,MAAM,CAAC,CAAC;YACvD,CAAC;QACF,CAAC;QAAC,MAAM,CAAC;YACR,oDAAoD;QACrD,CAAC;QACD,OAAO,GAAG,CAAC;IAAA,CACX,CAAC,EAAE,CAAC;IAEL,IAAI,mBAAmB,GAAY;QAClC,OAAO,IAAI,CAAC,oBAAoB,CAAC;IAAA,CACjC;IAED,KAAK,CAAC,OAA+B,EAAE,QAAoB,EAAQ;QAClE,IAAI,CAAC,YAAY,GAAG,OAAO,CAAC;QAC5B,IAAI,CAAC,aAAa,GAAG,QAAQ,CAAC;QAE9B,0CAA0C;QAC1C,IAAI,CAAC,MAAM,GAAG,OAAO,CAAC,KAAK,CAAC,KAAK,IAAI,KAAK,CAAC;QAC3C,IAAI,OAAO,CAAC,KAAK,CAAC,UAAU,EAAE,CAAC;YAC9B,OAAO,CAAC,KAAK,CAAC,UAAU,CAAC,IAAI,CAAC,CAAC;QAChC,CAAC;QACD,OAAO,CAAC,KAAK,CAAC,WAAW,CAAC,MAAM,CAAC,CAAC;QAClC,OAAO,CAAC,KAAK,CAAC,MAAM,EAAE,CAAC;QAEvB,qFAAqF;QACrF,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,aAAa,CAAC,CAAC;QAEpC,iEAAiE;QACjE,wEAAwE;QACxE,uEAAuE;QACvE,IAAI,OAAO,CAAC,GAAG,CAAC,aAAa,KAAK,GAAG,IAAI,OAAO,CAAC,GAAG,CAAC,IAAI,KAAK,MAAM,IAAI,OAAO,CAAC,MAAM,CAAC,KAAK,EAAE,CAAC;YAC9F,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,YAAY,CAAC,CAAC;YACnC,IAAI,CAAC,eAAe,GAAG,IAAI,CAAC;QAC7B,CAAC;QACD,OAAO,CAAC,IAAI,CAAC,MAAM,EAAE,IAAI,CAAC,aAAa,CAAC,CAAC;QAEzC,oCAAoC;QACpC,OAAO,CAAC,MAAM,CAAC,EAAE,CAAC,QAAQ,EAAE,IAAI,CAAC,aAAa,CAAC,CAAC;QAEhD,uEAAuE;QACvE,0DAA0D;QAC1D,IAAI,OAAO,CAAC,QAAQ,KAAK,OAAO,EAAE,CAAC;YAClC,OAAO,CAAC,IAAI,CAAC,OAAO,CAAC,GAAG,EAAE,UAAU,CAAC,CAAC;QACvC,CAAC;QAED,wEAAwE;QACxE,yEAAyE;QACzE,yEAAyE;QACzE,wCAAwC;QACxC,IAAI,CAAC,oBAAoB,EAAE,CAAC;QAE5B,2CAA2C;QAC3C,mFAAmF;QACnF,0DAA0D;QAC1D,IAAI,CAAC,2BAA2B,EAAE,CAAC;IAAA,CACnC;IAED;;;;;;;OAOG;IACK,gBAAgB,GAAS;QAChC,IAAI,CAAC,WAAW,GAAG,IAAI,WAAW,CAAC,EAAE,OAAO,EAAE,EAAE,EAAE,CAAC,CAAC;QAEpD,kDAAkD;QAClD,MAAM,oBAAoB,GAAG,kBAAkB,CAAC;QAEhD,oDAAoD;QACpD,IAAI,CAAC,WAAW,CAAC,EAAE,CAAC,MAAM,EAAE,CAAC,QAAQ,EAAE,EAAE,CAAC;YACzC,kEAAkE;YAClE,IAAI,CAAC,IAAI,CAAC,oBAAoB,EAAE,CAAC;gBAChC,MAAM,KAAK,GAAG,QAAQ,CAAC,KAAK,CAAC,oBAAoB,CAAC,CAAC;gBACnD,IAAI,KAAK,EAAE,CAAC;oBACX,IAAI,CAAC,oBAAoB,GAAG,IAAI,CAAC;oBACjC,sBAAsB,CAAC,IAAI,CAAC,CAAC;oBAE7B,8CAA8C;oBAC9C,qCAAqC;oBACrC,qDAAqD;oBACrD,gEAAgE;oBAChE,4EAA4E;oBAC5E,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,UAAU,CAAC,CAAC;oBACjC,OAAO,CAAC,yCAAyC;gBAClD,CAAC;YACF,CAAC;YAED,IAAI,IAAI,CAAC,YAAY,EAAE,CAAC;gBACvB,IAAI,CAAC,YAAY,CAAC,QAAQ,CAAC,CAAC;YAC7B,CAAC;QAAA,CACD,CAAC,CAAC;QAEH,kFAAkF;QAClF,IAAI,CAAC,WAAW,CAAC,EAAE,CAAC,OAAO,EAAE,CAAC,OAAO,EAAE,EAAE,CAAC;YACzC,IAAI,IAAI,CAAC,YAAY,EAAE,CAAC;gBACvB,IAAI,CAAC,YAAY,CAAC,YAAY,OAAO,WAAW,CAAC,CAAC;YACnD,CAAC;QAAA,CACD,CAAC,CAAC;QAEH,mDAAmD;QACnD,IAAI,CAAC,gBAAgB,GAAG,CAAC,IAAY,EAAE,EAAE,CAAC;YACzC,IAAI,CAAC,WAAY,CAAC,OAAO,CAAC,IAAI,CAAC,CAAC;QAAA,CAChC,CAAC;IAAA,CACF;IAED;;;;;;;;;;;;;OAaG;IACK,2BAA2B,GAAS;QAC3C,IAAI,CAAC,gBAAgB,EAAE,CAAC;QACxB,OAAO,CAAC,KAAK,CAAC,EAAE,CAAC,MAAM,EAAE,IAAI,CAAC,gBAAiB,CAAC,CAAC;QACjD,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,SAAS,CAAC,CAAC;QAChC,UAAU,CAAC,GAAG,EAAE,CAAC;YAChB,IAAI,CAAC,IAAI,CAAC,oBAAoB,IAAI,CAAC,IAAI,CAAC,sBAAsB,EAAE,CAAC;gBAChE,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,YAAY,CAAC,CAAC;gBACnC,IAAI,CAAC,sBAAsB,GAAG,IAAI,CAAC;YACpC,CAAC;QAAA,CACD,EAAE,GAAG,CAAC,CAAC;IAAA,CACR;IAED;;;;;OAKG;IACK,oBAAoB,GAAS;QACpC,IAAI,OAAO,CAAC,QAAQ,KAAK,OAAO;YAAE,OAAO;QACzC,IAAI,CAAC;YACJ,mEAAmE;YACnE,mEAAmE;YACnE,mCAAmC;YACnC,MAAM,KAAK,GAAG,UAAU,CAAC,OAAO,CAAC,CAAC;YAClC,MAAM,GAAG,GAAG,KAAK,CAAC,IAAI,CAAC,cAAc,CAAC,CAAC;YACvC,MAAM,YAAY,GAAG,GAAG,CAAC,IAAI,CAAC,mCAAmC,CAAC,CAAC;YACnE,MAAM,cAAc,GAAG,GAAG,CAAC,IAAI,CAAC,uDAAuD,CAAC,CAAC;YACzF,MAAM,cAAc,GAAG,GAAG,CAAC,IAAI,CAAC,gDAAgD,CAAC,CAAC;YAElF,MAAM,gBAAgB,GAAG,CAAC,EAAE,CAAC;YAC7B,MAAM,6BAA6B,GAAG,MAAM,CAAC;YAC7C,MAAM,MAAM,GAAG,YAAY,CAAC,gBAAgB,CAAC,CAAC;YAC9C,MAAM,IAAI,GAAG,IAAI,WAAW,CAAC,CAAC,CAAC,CAAC;YAChC,cAAc,CAAC,MAAM,EAAE,IAAI,CAAC,CAAC;YAC7B,cAAc,CAAC,MAAM,EAAE,IAAI,CAAC,CAAC,CAAE,GAAG,6BAA6B,CAAC,CAAC;QAClE,CAAC;QAAC,MAAM,CAAC;YACR,sEAAoE;QACrE,CAAC;IAAA,CACD;IAED,KAAK,CAAC,UAAU,CAAC,KAAK,GAAG,IAAI,EAAE,MAAM,GAAG,EAAE,EAAiB;QAC1D,IAAI,IAAI,CAAC,oBAAoB,EAAE,CAAC;YAC/B,iEAAiE;YACjE,8CAA8C;YAC9C,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,SAAS,CAAC,CAAC;YAChC,IAAI,CAAC,oBAAoB,GAAG,KAAK,CAAC;YAClC,sBAAsB,CAAC,KAAK,CAAC,CAAC;QAC/B,CAAC;QACD,IAAI,IAAI,CAAC,sBAAsB,EAAE,CAAC;YACjC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,YAAY,CAAC,CAAC;YACnC,IAAI,CAAC,sBAAsB,GAAG,KAAK,CAAC;QACrC,CAAC;QAED,MAAM,eAAe,GAAG,IAAI,CAAC,YAAY,CAAC;QAC1C,IAAI,CAAC,YAAY,GAAG,SAAS,CAAC;QAE9B,IAAI,YAAY,GAAG,IAAI,CAAC,GAAG,EAAE,CAAC;QAC9B,MAAM,MAAM,GAAG,GAAG,EAAE,CAAC;YACpB,YAAY,GAAG,IAAI,CAAC,GAAG,EAAE,CAAC;QAAA,CAC1B,CAAC;QAEF,OAAO,CAAC,KAAK,CAAC,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;QACjC,MAAM,OAAO,GAAG,IAAI,CAAC,GAAG,EAAE,GAAG,KAAK,CAAC;QAEnC,IAAI,CAAC;YACJ,OAAO,IAAI,EAAE,CAAC;gBACb,MAAM,GAAG,GAAG,IAAI,CAAC,GAAG,EAAE,CAAC;gBACvB,MAAM,QAAQ,GAAG,OAAO,GAAG,GAAG,CAAC;gBAC/B,IAAI,QAAQ,IAAI,CAAC;oBAAE,MAAM;gBACzB,IAAI,GAAG,GAAG,YAAY,IAAI,MAAM;oBAAE,MAAM;gBACxC,MAAM,IAAI,OAAO,CAAC,CAAC,OAAO,EAAE,EAAE,CAAC,UAAU,CAAC,OAAO,EAAE,IAAI,CAAC,GAAG,CAAC,MAAM,EAAE,QAAQ,CAAC,CAAC,CAAC,CAAC;YACjF,CAAC;QACF,CAAC;gBAAS,CAAC;YACV,OAAO,CAAC,KAAK,CAAC,cAAc,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;YAC7C,IAAI,CAAC,YAAY,GAAG,eAAe,CAAC;QACrC,CAAC;IAAA,CACD;IAED,IAAI,GAAS;QACZ,IAAI,IAAI,CAAC,qBAAqB,EAAE,EAAE,CAAC;YAClC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,gCAAgC,CAAC,CAAC;QACxD,CAAC;QAED,uEAAuE;QACvE,sEAAsE;QACtE,wEAAwE;QACxE,oDAAoD;QACpD,OAAO,CAAC,GAAG,CAAC,MAAM,EAAE,IAAI,CAAC,aAAa,CAAC,CAAC;QACxC,IAAI,CAAC,aAAa,EAAE,CAAC;QAErB,+BAA+B;QAC/B,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,aAAa,CAAC,CAAC;QAEpC,sEAAsE;QACtE,IAAI,IAAI,CAAC,oBAAoB,EAAE,CAAC;YAC/B,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,SAAS,CAAC,CAAC;YAChC,IAAI,CAAC,oBAAoB,GAAG,KAAK,CAAC;YAClC,sBAAsB,CAAC,KAAK,CAAC,CAAC;QAC/B,CAAC;QACD,IAAI,IAAI,CAAC,sBAAsB,EAAE,CAAC;YACjC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,YAAY,CAAC,CAAC;YACnC,IAAI,CAAC,sBAAsB,GAAG,KAAK,CAAC;QACrC,CAAC;QAED,uBAAuB;QACvB,IAAI,IAAI,CAAC,WAAW,EAAE,CAAC;YACtB,IAAI,CAAC,WAAW,CAAC,OAAO,EAAE,CAAC;YAC3B,IAAI,CAAC,WAAW,GAAG,SAAS,CAAC;QAC9B,CAAC;QAED,wBAAwB;QACxB,IAAI,IAAI,CAAC,gBAAgB,EAAE,CAAC;YAC3B,OAAO,CAAC,KAAK,CAAC,cAAc,CAAC,MAAM,EAAE,IAAI,CAAC,gBAAgB,CAAC,CAAC;YAC5D,IAAI,CAAC,gBAAgB,GAAG,SAAS,CAAC;QACnC,CAAC;QACD,IAAI,CAAC,YAAY,GAAG,SAAS,CAAC;QAC9B,IAAI,IAAI,CAAC,aAAa,EAAE,CAAC;YACxB,OAAO,CAAC,MAAM,CAAC,cAAc,CAAC,QAAQ,EAAE,IAAI,CAAC,aAAa,CAAC,CAAC;YAC5D,IAAI,CAAC,aAAa,GAAG,SAAS,CAAC;QAChC,CAAC;QAED,sEAAsE;QACtE,yEAAyE;QACzE,sDAAsD;QACtD,OAAO,CAAC,KAAK,CAAC,KAAK,EAAE,CAAC;QAEtB,yBAAyB;QACzB,IAAI,OAAO,CAAC,KAAK,CAAC,UAAU,EAAE,CAAC;YAC9B,OAAO,CAAC,KAAK,CAAC,UAAU,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC;QACvC,CAAC;IAAA,CACD;IAED;;;;;;;;;OASG;IACc,aAAa,GAAG,GAAS,EAAE,CAAC;QAC5C,IAAI,IAAI,CAAC,gBAAgB,EAAE,CAAC;YAC3B,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,aAAa,CAAC,CAAC;YACpC,IAAI,CAAC,gBAAgB,GAAG,KAAK,CAAC;QAC/B,CAAC;QACD,IAAI,IAAI,CAAC,eAAe,EAAE,CAAC;YAC1B,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,aAAa,CAAC,CAAC;YACpC,IAAI,CAAC,eAAe,GAAG,KAAK,CAAC;QAC9B,CAAC;IAAA,CACD,CAAC;IAEF,IAAI,cAAc,GAAY;QAC7B,OAAO,IAAI,CAAC,eAAe,CAAC;IAAA,CAC5B;IAED,kBAAkB,CAAC,MAAe,EAAQ;QACzC,IAAI,IAAI,CAAC,gBAAgB,KAAK,MAAM;YAAE,OAAO;QAC7C,IAAI,CAAC,gBAAgB,GAAG,MAAM,CAAC;QAC/B,2EAA2E;QAC3E,4EAA0E;QAC1E,sEAAsE;QACtE,IAAI,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,aAAa,CAAC,CAAC,CAAC,aAAa,CAAC,CAAC;IAAA,CACnD;IAED,KAAK,CAAC,IAAY,EAAQ;QACzB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC;QAC3B,IAAI,IAAI,CAAC,YAAY,EAAE,CAAC;YACvB,IAAI,CAAC;gBACJ,EAAE,CAAC,cAAc,CAAC,IAAI,CAAC,YAAY,EAAE,IAAI,EAAE,EAAE,QAAQ,EAAE,MAAM,EAAE,CAAC,CAAC;YAClE,CAAC;YAAC,MAAM,CAAC;gBACR,wBAAwB;YACzB,CAAC;QACF,CAAC;IAAA,CACD;IAED,IAAI,OAAO,GAAW;QACrB,OAAO,OAAO,CAAC,MAAM,CAAC,OAAO,IAAI,MAAM,CAAC,OAAO,CAAC,GAAG,CAAC,OAAO,CAAC,IAAI,EAAE,CAAC;IAAA,CACnE;IAED,IAAI,IAAI,GAAW;QAClB,OAAO,OAAO,CAAC,MAAM,CAAC,IAAI,IAAI,MAAM,CAAC,OAAO,CAAC,GAAG,CAAC,KAAK,CAAC,IAAI,EAAE,CAAC;IAAA,CAC9D;IAED,MAAM,CAAC,KAAa,EAAQ;QAC3B,IAAI,KAAK,GAAG,CAAC,EAAE,CAAC;YACf,YAAY;YACZ,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,QAAQ,KAAK,GAAG,CAAC,CAAC;QACxC,CAAC;aAAM,IAAI,KAAK,GAAG,CAAC,EAAE,CAAC;YACtB,UAAU;YACV,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,QAAQ,CAAC,KAAK,GAAG,CAAC,CAAC;QACzC,CAAC;QACD,2BAA2B;IAD1B,CAED;IAED,UAAU,GAAS;QAClB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,WAAW,CAAC,CAAC;IAAA,CAClC;IAED,UAAU,GAAS;QAClB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,WAAW,CAAC,CAAC;IAAA,CAClC;IAED,SAAS,GAAS;QACjB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,QAAQ,CAAC,CAAC;IAAA,CAC/B;IAED,eAAe,GAAS;QACvB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,QAAQ,CAAC,CAAC;IAAA,CAC/B;IAED,WAAW,GAAS;QACnB,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,eAAe,CAAC,CAAC,CAAC,sCAAsC;IAAvC,CACtC;IAED,QAAQ,CAAC,KAAa,EAAQ;QAC7B,8CAA8C;QAC9C,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,UAAU,KAAK,MAAM,CAAC,CAAC;IAAA,CAC5C;IAED,WAAW,CAAC,MAAe,EAAQ;QAClC,IAAI,MAAM,EAAE,CAAC;YACZ,qCAAqC;YACrC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,iCAAiC,CAAC,CAAC;YACxD,IAAI,CAAC,IAAI,CAAC,gBAAgB,EAAE,CAAC;gBAC5B,IAAI,CAAC,gBAAgB,GAAG,WAAW,CAAC,GAAG,EAAE,CAAC;oBACzC,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,iCAAiC,CAAC,CAAC;gBAAA,CACxD,EAAE,8BAA8B,CAAC,CAAC;YACpC,CAAC;QACF,CAAC;aAAM,CAAC;YACP,IAAI,CAAC,qBAAqB,EAAE,CAAC;YAC7B,6BAA6B;YAC7B,OAAO,CAAC,MAAM,CAAC,KAAK,CAAC,gCAAgC,CAAC,CAAC;QACxD,CAAC;IAAA,CACD;IAEO,qBAAqB,GAAY;QACxC,IAAI,CAAC,IAAI,CAAC,gBAAgB;YAAE,OAAO,KAAK,CAAC;QACzC,aAAa,CAAC,IAAI,CAAC,gBAAgB,CAAC,CAAC;QACrC,IAAI,CAAC,gBAAgB,GAAG,SAAS,CAAC;QAClC,OAAO,IAAI,CAAC;IAAA,CACZ;CACD","sourcesContent":["import * as fs from \"node:fs\";\nimport { createRequire } from \"node:module\";\nimport * as path from \"node:path\";\nimport { setKittyProtocolActive } from \"./keys.js\";\nimport { MOUSE_DISABLE, MOUSE_ENABLE } from \"./mouse.js\";\nimport { StdinBuffer } from \"./stdin-buffer.js\";\n\nconst cjsRequire = createRequire(import.meta.url);\n\nconst TERMINAL_PROGRESS_KEEPALIVE_MS = 1000;\nconst TERMINAL_PROGRESS_ACTIVE_SEQUENCE = \"\\x1b]9;4;3\\x07\";\nconst TERMINAL_PROGRESS_CLEAR_SEQUENCE = \"\\x1b]9;4;0;\\x07\";\n\n/**\n * Minimal terminal interface for TUI\n */\nexport interface Terminal {\n\t// Start the terminal with input and resize handlers\n\tstart(onInput: (data: string) => void, onResize: () => void): void;\n\n\t// Stop the terminal and restore state\n\tstop(): void;\n\n\t/**\n\t * Drain stdin before exiting to prevent Kitty key release events from\n\t * leaking to the parent shell over slow SSH connections.\n\t * @param maxMs - Maximum time to drain (default: 1000ms)\n\t * @param idleMs - Exit early if no input arrives within this time (default: 50ms)\n\t */\n\tdrainInput(maxMs?: number, idleMs?: number): Promise<void>;\n\n\t// Write output to terminal\n\twrite(data: string): void;\n\n\t// Get terminal dimensions\n\tget columns(): number;\n\tget rows(): number;\n\n\t// Whether Kitty keyboard protocol is active\n\tget kittyProtocolActive(): boolean;\n\n\t// Cursor positioning (relative to current position)\n\tmoveBy(lines: number): void; // Move cursor up (negative) or down (positive) by N lines\n\n\t// Cursor visibility\n\thideCursor(): void; // Hide the cursor\n\tshowCursor(): void; // Show the cursor\n\n\t// Clear operations\n\tclearLine(): void; // Clear current line\n\tclearFromCursor(): void; // Clear from cursor to end of screen\n\tclearScreen(): void; // Clear entire screen and move cursor to (0,0)\n\n\t// Title operations\n\tsetTitle(title: string): void; // Set terminal window title\n\n\t// Progress indicator (OSC 9;4)\n\tsetProgress(active: boolean): void;\n\n\t/**\n\t * Whether mouse reporting is on, so the wheel arrives as input rather than\n\t * scrolling the terminal's own scrollback. False when the terminal cannot\n\t * take it or `HOOCODE_MOUSE=0` turned it off.\n\t */\n\tget mouseReporting(): boolean;\n\n\t/**\n\t * Enter or leave the alternate screen.\n\t *\n\t * The alternate screen is a fixed grid with no scrollback of its own, which\n\t * is exactly what a pinned viewport needs: the app addresses rows directly\n\t * and nothing it writes can move the view. Leaving restores the normal\n\t * screen — and the scrollback behind it — byte for byte.\n\t */\n\tsetAlternateScreen(active: boolean): void;\n}\n\n/**\n * Real terminal using process.stdin/stdout\n */\nexport class ProcessTerminal implements Terminal {\n\tprivate wasRaw = false;\n\tprivate inputHandler?: (data: string) => void;\n\tprivate resizeHandler?: () => void;\n\tprivate _kittyProtocolActive = false;\n\tprivate _modifyOtherKeysActive = false;\n\tprivate _mouseReporting = false;\n\tprivate _alternateScreen = false;\n\tprivate stdinBuffer?: StdinBuffer;\n\tprivate stdinDataHandler?: (data: string) => void;\n\tprivate progressInterval?: ReturnType<typeof setInterval>;\n\tprivate writeLogPath = (() => {\n\t\tconst env = process.env.HOOCODE_TUI_WRITE_LOG || \"\";\n\t\tif (!env) return \"\";\n\t\ttry {\n\t\t\tif (fs.statSync(env).isDirectory()) {\n\t\t\t\tconst now = new Date();\n\t\t\t\tconst ts = `${now.getFullYear()}-${String(now.getMonth() + 1).padStart(2, \"0\")}-${String(now.getDate()).padStart(2, \"0\")}_${String(now.getHours()).padStart(2, \"0\")}-${String(now.getMinutes()).padStart(2, \"0\")}-${String(now.getSeconds()).padStart(2, \"0\")}`;\n\t\t\t\treturn path.join(env, `tui-${ts}-${process.pid}.log`);\n\t\t\t}\n\t\t} catch {\n\t\t\t// Not an existing directory - use as-is (file path)\n\t\t}\n\t\treturn env;\n\t})();\n\n\tget kittyProtocolActive(): boolean {\n\t\treturn this._kittyProtocolActive;\n\t}\n\n\tstart(onInput: (data: string) => void, onResize: () => void): void {\n\t\tthis.inputHandler = onInput;\n\t\tthis.resizeHandler = onResize;\n\n\t\t// Save previous state and enable raw mode\n\t\tthis.wasRaw = process.stdin.isRaw || false;\n\t\tif (process.stdin.setRawMode) {\n\t\t\tprocess.stdin.setRawMode(true);\n\t\t}\n\t\tprocess.stdin.setEncoding(\"utf8\");\n\t\tprocess.stdin.resume();\n\n\t\t// Enable bracketed paste mode - terminal will wrap pastes in \\x1b[200~ ... \\x1b[201~\n\t\tprocess.stdout.write(\"\\x1b[?2004h\");\n\n\t\t// Take the wheel. See mouse.ts for why, and for what this costs.\n\t\t// A dumb terminal has nothing to report with, and HOOCODE_MOUSE=0 hands\n\t\t// the wheel (and the un-modified drag-select) back to anyone who asks.\n\t\tif (process.env.HOOCODE_MOUSE !== \"0\" && process.env.TERM !== \"dumb\" && process.stdout.isTTY) {\n\t\t\tprocess.stdout.write(MOUSE_ENABLE);\n\t\t\tthis._mouseReporting = true;\n\t\t}\n\t\tprocess.once(\"exit\", this.restoreOnExit);\n\n\t\t// Set up resize handler immediately\n\t\tprocess.stdout.on(\"resize\", this.resizeHandler);\n\n\t\t// Refresh terminal dimensions - they may be stale after suspend/resume\n\t\t// (SIGWINCH is lost while process is stopped). Unix only.\n\t\tif (process.platform !== \"win32\") {\n\t\t\tprocess.kill(process.pid, \"SIGWINCH\");\n\t\t}\n\n\t\t// On Windows, enable ENABLE_VIRTUAL_TERMINAL_INPUT so the console sends\n\t\t// VT escape sequences (e.g. \\x1b[Z for Shift+Tab) instead of raw console\n\t\t// events that lose modifier information. Must run AFTER setRawMode(true)\n\t\t// since that resets console mode flags.\n\t\tthis.enableWindowsVTInput();\n\n\t\t// Query and enable Kitty keyboard protocol\n\t\t// The query handler intercepts input temporarily, then installs the user's handler\n\t\t// See: https://sw.kovidgoyal.net/kitty/keyboard-protocol/\n\t\tthis.queryAndEnableKittyProtocol();\n\t}\n\n\t/**\n\t * Set up StdinBuffer to split batched input into individual sequences.\n\t * This ensures components receive single events, making matchesKey/isKeyRelease work correctly.\n\t *\n\t * Also watches for Kitty protocol response and enables it when detected.\n\t * This is done here (after stdinBuffer parsing) rather than on raw stdin\n\t * to handle the case where the response arrives split across multiple events.\n\t */\n\tprivate setupStdinBuffer(): void {\n\t\tthis.stdinBuffer = new StdinBuffer({ timeout: 10 });\n\n\t\t// Kitty protocol response pattern: \\x1b[?<flags>u\n\t\tconst kittyResponsePattern = /^\\x1b\\[\\?(\\d+)u$/;\n\n\t\t// Forward individual sequences to the input handler\n\t\tthis.stdinBuffer.on(\"data\", (sequence) => {\n\t\t\t// Check for Kitty protocol response (only if not already enabled)\n\t\t\tif (!this._kittyProtocolActive) {\n\t\t\t\tconst match = sequence.match(kittyResponsePattern);\n\t\t\t\tif (match) {\n\t\t\t\t\tthis._kittyProtocolActive = true;\n\t\t\t\t\tsetKittyProtocolActive(true);\n\n\t\t\t\t\t// Enable Kitty keyboard protocol (push flags)\n\t\t\t\t\t// Flag 1 = disambiguate escape codes\n\t\t\t\t\t// Flag 2 = report event types (press/repeat/release)\n\t\t\t\t\t// Flag 4 = report alternate keys (shifted key, base layout key)\n\t\t\t\t\t// Base layout key enables shortcuts to work with non-Latin keyboard layouts\n\t\t\t\t\tprocess.stdout.write(\"\\x1b[>7u\");\n\t\t\t\t\treturn; // Don't forward protocol response to TUI\n\t\t\t\t}\n\t\t\t}\n\n\t\t\tif (this.inputHandler) {\n\t\t\t\tthis.inputHandler(sequence);\n\t\t\t}\n\t\t});\n\n\t\t// Re-wrap paste content with bracketed paste markers for existing editor handling\n\t\tthis.stdinBuffer.on(\"paste\", (content) => {\n\t\t\tif (this.inputHandler) {\n\t\t\t\tthis.inputHandler(`\\x1b[200~${content}\\x1b[201~`);\n\t\t\t}\n\t\t});\n\n\t\t// Handler that pipes stdin data through the buffer\n\t\tthis.stdinDataHandler = (data: string) => {\n\t\t\tthis.stdinBuffer!.process(data);\n\t\t};\n\t}\n\n\t/**\n\t * Query terminal for Kitty keyboard protocol support and enable if available.\n\t *\n\t * Sends CSI ? u to query current flags. If terminal responds with CSI ? <flags> u,\n\t * it supports the protocol and we enable it with CSI > 1 u.\n\t *\n\t * If no Kitty response arrives shortly after startup, fall back to enabling\n\t * xterm modifyOtherKeys mode 2. This is needed for tmux, which can forward\n\t * modified enter keys as CSI-u when extended-keys is enabled, but may not\n\t * answer the Kitty protocol query.\n\t *\n\t * The response is detected in setupStdinBuffer's data handler, which properly\n\t * handles the case where the response arrives split across multiple stdin events.\n\t */\n\tprivate queryAndEnableKittyProtocol(): void {\n\t\tthis.setupStdinBuffer();\n\t\tprocess.stdin.on(\"data\", this.stdinDataHandler!);\n\t\tprocess.stdout.write(\"\\x1b[?u\");\n\t\tsetTimeout(() => {\n\t\t\tif (!this._kittyProtocolActive && !this._modifyOtherKeysActive) {\n\t\t\t\tprocess.stdout.write(\"\\x1b[>4;2m\");\n\t\t\t\tthis._modifyOtherKeysActive = true;\n\t\t\t}\n\t\t}, 150);\n\t}\n\n\t/**\n\t * On Windows, add ENABLE_VIRTUAL_TERMINAL_INPUT (0x0200) to the stdin\n\t * console handle so the terminal sends VT sequences for modified keys\n\t * (e.g. \\x1b[Z for Shift+Tab). Without this, libuv's ReadConsoleInputW\n\t * discards modifier state and Shift+Tab arrives as plain \\t.\n\t */\n\tprivate enableWindowsVTInput(): void {\n\t\tif (process.platform !== \"win32\") return;\n\t\ttry {\n\t\t\t// Dynamic require to avoid bundling koffi's 74MB of cross-platform\n\t\t\t// native binaries into every compiled binary. Koffi is only needed\n\t\t\t// on Windows for VT input support.\n\t\t\tconst koffi = cjsRequire(\"koffi\");\n\t\t\tconst k32 = koffi.load(\"kernel32.dll\");\n\t\t\tconst GetStdHandle = k32.func(\"void* __stdcall GetStdHandle(int)\");\n\t\t\tconst GetConsoleMode = k32.func(\"bool __stdcall GetConsoleMode(void*, _Out_ uint32_t*)\");\n\t\t\tconst SetConsoleMode = k32.func(\"bool __stdcall SetConsoleMode(void*, uint32_t)\");\n\n\t\t\tconst STD_INPUT_HANDLE = -10;\n\t\t\tconst ENABLE_VIRTUAL_TERMINAL_INPUT = 0x0200;\n\t\t\tconst handle = GetStdHandle(STD_INPUT_HANDLE);\n\t\t\tconst mode = new Uint32Array(1);\n\t\t\tGetConsoleMode(handle, mode);\n\t\t\tSetConsoleMode(handle, mode[0]! | ENABLE_VIRTUAL_TERMINAL_INPUT);\n\t\t} catch {\n\t\t\t// koffi not available — Shift+Tab won't be distinguishable from Tab\n\t\t}\n\t}\n\n\tasync drainInput(maxMs = 1000, idleMs = 50): Promise<void> {\n\t\tif (this._kittyProtocolActive) {\n\t\t\t// Disable Kitty keyboard protocol first so any late key releases\n\t\t\t// do not generate new Kitty escape sequences.\n\t\t\tprocess.stdout.write(\"\\x1b[<u\");\n\t\t\tthis._kittyProtocolActive = false;\n\t\t\tsetKittyProtocolActive(false);\n\t\t}\n\t\tif (this._modifyOtherKeysActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[>4;0m\");\n\t\t\tthis._modifyOtherKeysActive = false;\n\t\t}\n\n\t\tconst previousHandler = this.inputHandler;\n\t\tthis.inputHandler = undefined;\n\n\t\tlet lastDataTime = Date.now();\n\t\tconst onData = () => {\n\t\t\tlastDataTime = Date.now();\n\t\t};\n\n\t\tprocess.stdin.on(\"data\", onData);\n\t\tconst endTime = Date.now() + maxMs;\n\n\t\ttry {\n\t\t\twhile (true) {\n\t\t\t\tconst now = Date.now();\n\t\t\t\tconst timeLeft = endTime - now;\n\t\t\t\tif (timeLeft <= 0) break;\n\t\t\t\tif (now - lastDataTime >= idleMs) break;\n\t\t\t\tawait new Promise((resolve) => setTimeout(resolve, Math.min(idleMs, timeLeft)));\n\t\t\t}\n\t\t} finally {\n\t\t\tprocess.stdin.removeListener(\"data\", onData);\n\t\t\tthis.inputHandler = previousHandler;\n\t\t}\n\t}\n\n\tstop(): void {\n\t\tif (this.clearProgressInterval()) {\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_CLEAR_SEQUENCE);\n\t\t}\n\n\t\t// Back to the normal screen and off the wheel before anything else, so\n\t\t// whatever the rest of this teardown prints lands where the user will\n\t\t// actually see it. Leaving mouse reporting on would have the shell that\n\t\t// outlives us printing `<35;10;4M` at every twitch.\n\t\tprocess.off(\"exit\", this.restoreOnExit);\n\t\tthis.restoreOnExit();\n\n\t\t// Disable bracketed paste mode\n\t\tprocess.stdout.write(\"\\x1b[?2004l\");\n\n\t\t// Disable Kitty keyboard protocol if not already done by drainInput()\n\t\tif (this._kittyProtocolActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[<u\");\n\t\t\tthis._kittyProtocolActive = false;\n\t\t\tsetKittyProtocolActive(false);\n\t\t}\n\t\tif (this._modifyOtherKeysActive) {\n\t\t\tprocess.stdout.write(\"\\x1b[>4;0m\");\n\t\t\tthis._modifyOtherKeysActive = false;\n\t\t}\n\n\t\t// Clean up StdinBuffer\n\t\tif (this.stdinBuffer) {\n\t\t\tthis.stdinBuffer.destroy();\n\t\t\tthis.stdinBuffer = undefined;\n\t\t}\n\n\t\t// Remove event handlers\n\t\tif (this.stdinDataHandler) {\n\t\t\tprocess.stdin.removeListener(\"data\", this.stdinDataHandler);\n\t\t\tthis.stdinDataHandler = undefined;\n\t\t}\n\t\tthis.inputHandler = undefined;\n\t\tif (this.resizeHandler) {\n\t\t\tprocess.stdout.removeListener(\"resize\", this.resizeHandler);\n\t\t\tthis.resizeHandler = undefined;\n\t\t}\n\n\t\t// Pause stdin to prevent any buffered input (e.g., Ctrl+D) from being\n\t\t// re-interpreted after raw mode is disabled. This fixes a race condition\n\t\t// where Ctrl+D could close the parent shell over SSH.\n\t\tprocess.stdin.pause();\n\n\t\t// Restore raw mode state\n\t\tif (process.stdin.setRawMode) {\n\t\t\tprocess.stdin.setRawMode(this.wasRaw);\n\t\t}\n\t}\n\n\t/**\n\t * Last-resort restore, for an exit that never reached `stop()`.\n\t *\n\t * An uncaught throw leaves whatever modes were on, on. Bracketed paste and\n\t * the Kitty protocol degrade quietly if that happens; the alternate screen\n\t * does not — the user is left staring at a blank grid with their shell\n\t * invisible underneath it, and mouse reporting spits `<35;10;4M` at the\n\t * prompt on every twitch. `exit` handlers may only do synchronous work,\n\t * which writing a few bytes to stdout is.\n\t */\n\tprivate readonly restoreOnExit = (): void => {\n\t\tif (this._alternateScreen) {\n\t\t\tprocess.stdout.write(\"\\x1b[?1049l\");\n\t\t\tthis._alternateScreen = false;\n\t\t}\n\t\tif (this._mouseReporting) {\n\t\t\tprocess.stdout.write(MOUSE_DISABLE);\n\t\t\tthis._mouseReporting = false;\n\t\t}\n\t};\n\n\tget mouseReporting(): boolean {\n\t\treturn this._mouseReporting;\n\t}\n\n\tsetAlternateScreen(active: boolean): void {\n\t\tif (this._alternateScreen === active) return;\n\t\tthis._alternateScreen = active;\n\t\t// ?1049 saves and restores the cursor along with the screen, so the normal\n\t\t// screen comes back with the cursor where the app left it — which is what\n\t\t// the differential renderer's row bookkeeping assumes on the way out.\n\t\tthis.write(active ? \"\\x1b[?1049h\" : \"\\x1b[?1049l\");\n\t}\n\n\twrite(data: string): void {\n\t\tprocess.stdout.write(data);\n\t\tif (this.writeLogPath) {\n\t\t\ttry {\n\t\t\t\tfs.appendFileSync(this.writeLogPath, data, { encoding: \"utf8\" });\n\t\t\t} catch {\n\t\t\t\t// Ignore logging errors\n\t\t\t}\n\t\t}\n\t}\n\n\tget columns(): number {\n\t\treturn process.stdout.columns || Number(process.env.COLUMNS) || 80;\n\t}\n\n\tget rows(): number {\n\t\treturn process.stdout.rows || Number(process.env.LINES) || 24;\n\t}\n\n\tmoveBy(lines: number): void {\n\t\tif (lines > 0) {\n\t\t\t// Move down\n\t\t\tprocess.stdout.write(`\\x1b[${lines}B`);\n\t\t} else if (lines < 0) {\n\t\t\t// Move up\n\t\t\tprocess.stdout.write(`\\x1b[${-lines}A`);\n\t\t}\n\t\t// lines === 0: no movement\n\t}\n\n\thideCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[?25l\");\n\t}\n\n\tshowCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[?25h\");\n\t}\n\n\tclearLine(): void {\n\t\tprocess.stdout.write(\"\\x1b[K\");\n\t}\n\n\tclearFromCursor(): void {\n\t\tprocess.stdout.write(\"\\x1b[J\");\n\t}\n\n\tclearScreen(): void {\n\t\tprocess.stdout.write(\"\\x1b[2J\\x1b[H\"); // Clear screen and move to home (1,1)\n\t}\n\n\tsetTitle(title: string): void {\n\t\t// OSC 0;title BEL - set terminal window title\n\t\tprocess.stdout.write(`\\x1b]0;${title}\\x07`);\n\t}\n\n\tsetProgress(active: boolean): void {\n\t\tif (active) {\n\t\t\t// OSC 9;4;3 - indeterminate progress\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_ACTIVE_SEQUENCE);\n\t\t\tif (!this.progressInterval) {\n\t\t\t\tthis.progressInterval = setInterval(() => {\n\t\t\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_ACTIVE_SEQUENCE);\n\t\t\t\t}, TERMINAL_PROGRESS_KEEPALIVE_MS);\n\t\t\t}\n\t\t} else {\n\t\t\tthis.clearProgressInterval();\n\t\t\t// OSC 9;4;0 - clear progress\n\t\t\tprocess.stdout.write(TERMINAL_PROGRESS_CLEAR_SEQUENCE);\n\t\t}\n\t}\n\n\tprivate clearProgressInterval(): boolean {\n\t\tif (!this.progressInterval) return false;\n\t\tclearInterval(this.progressInterval);\n\t\tthis.progressInterval = undefined;\n\t\treturn true;\n\t}\n}\n"]}