@kodrunhq/opencode-autopilot 1.7.0 → 1.9.0

package/README.md

@@ -42,7 +42,7 @@ The AI walks you through installation, model assignment for each agent group, an
 bunx @kodrunhq/opencode-autopilot install
 ```
 
-This registers the plugin in `opencode.json` and creates a starter config. Then launch OpenCode and run `/oc-configure` to set up your model assignments.
+This registers the plugin in `opencode.json` and creates a starter config. Then run `bunx @kodrunhq/opencode-autopilot configure` to set up your model assignments.
 
 ### Option C: Manual setup
 
@@ -60,7 +60,7 @@ npm install -g @kodrunhq/opencode-autopilot
 }
 ```
 
-Launch OpenCode. The plugin auto-installs agents, skills, and commands on first load and shows a welcome toast directing you to `/oc-configure`.
+Launch OpenCode. The plugin auto-installs agents, skills, and commands on first load and shows a welcome toast.
 
 ### Verify your setup
 
@@ -72,7 +72,7 @@ This checks config health, model assignments, and adversarial diversity between
 
 ## Model Groups
 
-Agents are organized into 8 groups by the type of thinking they do. Each group gets a primary model and fallback chain. The `/oc-configure` command walks you through assigning models interactively.
+Agents are organized into 8 groups by the type of thinking they do. Each group gets a primary model and fallback chain. Run `bunx @kodrunhq/opencode-autopilot configure` to assign models interactively. For advanced use, the `oc_configure` tool is also available in-session.
 
 | Group | Agents | What they do | Model recommendation |
 |-------|--------|-------------|---------------------|
@@ -203,22 +203,22 @@ The plugin ships with production-ready assets that auto-install to `~/.config/op
 | Type | Assets | Purpose |
 |------|--------|---------|
 | **Agents** | researcher, metaprompter, documenter, pr-reviewer, autopilot + 10 pipeline agents | Research, docs, PR review, full autonomous pipeline |
-| **Commands** | `/oc-configure`, `/new-agent`, `/new-skill`, `/new-command`, `/review-pr` | Model setup, extend the plugin in-session, PR reviews |
+| **Commands** | `/oc-brainstorm`, `/oc-tdd`, `/oc-quick`, `/oc-write-plan`, `/oc-stocktake`, `/oc-review-pr`, `/oc-update-docs`, `/oc-new-agent`, `/oc-new-skill`, `/oc-new-command` | Brainstorming, TDD, quick tasks, planning, auditing, PR reviews, docs, extend plugin |
 | **Skills** | coding-standards | Universal best practices (naming, error handling, immutability, validation) |
 
 ### In-session creation
 
 Extend the plugin without leaving OpenCode:
 
-- **`/new-agent`** -- Create a custom agent with YAML frontmatter + system prompt
-- **`/new-skill`** -- Create a skill directory with domain knowledge
-- **`/new-command`** -- Create a slash command (validates against built-in names)
+- **`/oc-new-agent`** -- Create a custom agent with YAML frontmatter + system prompt
+- **`/oc-new-skill`** -- Create a skill directory with domain knowledge
+- **`/oc-new-command`** -- Create a slash command (validates against built-in names)
 
 All created assets write to `~/.config/opencode/` and are available immediately.
 
 ## Configuration
 
-Config lives at `~/.config/opencode/opencode-autopilot.json`. Run `/oc-configure` for interactive setup, or edit manually.
+Config lives at `~/.config/opencode/opencode-autopilot.json`. Run `bunx @kodrunhq/opencode-autopilot configure` for interactive setup, or edit manually.
 
 | Setting | Options | Default |
 |---------|---------|---------|

package/bin/cli.ts

@@ -200,7 +200,7 @@ async function printSystemChecks(
 			console.log(`  Setup completed         ${green("✓")} configured: true`);
 		} else {
 			console.log(
-				`  Setup completed         ${red("✗")} configured: false — run /oc-configure in OpenCode`,
+				`  Setup completed         ${red("✗")} configured: false — run bunx @kodrunhq/opencode-autopilot configure`,
 			);
 			hasFailure = true;
 		}

package/package.json

@@ -1,6 +1,6 @@
 {
 	"name": "@kodrunhq/opencode-autopilot",
-	"version": "1.7.0",
+	"version": "1.9.0",
 	"description": "Curated agents, skills, and commands for the OpenCode AI coding CLI — autonomous orchestrator, multi-agent code review, model fallback, and in-session asset creation tools.",
 	"main": "src/index.ts",
 	"keywords": [

package/src/index.ts

@@ -236,7 +236,7 @@ const plugin: Plugin = async (input) => {
 			if (event.type === "session.created" && isFirstLoad(config)) {
 				await sdkOps.showToast(
 					"Welcome to OpenCode Autopilot!",
-					"Run /oc-configure to set up your model assignments for each agent group.",
+					"Plugin loaded. Run oc_doctor to verify your setup.",
 					"info",
 				);
 			}

package/src/installer.ts

@@ -7,14 +7,28 @@ import { getAssetsDir, getGlobalConfigDir } from "./utils/paths";
  * Assets that were previously shipped but have since been removed from the source repo.
  * These are cleaned up from the target directory on every install to avoid stale files.
  */
-const DEPRECATED_ASSETS = ["agents/placeholder-agent.md", "commands/configure.md"] as const;
+const DEPRECATED_ASSETS = [
+	"agents/placeholder-agent.md",
+	"commands/configure.md",
+	"commands/oc-configure.md",
+	"commands/brainstorm.md",
+	"commands/new-agent.md",
+	"commands/new-command.md",
+	"commands/new-skill.md",
+	"commands/quick.md",
+	"commands/review-pr.md",
+	"commands/stocktake.md",
+	"commands/tdd.md",
+	"commands/update-docs.md",
+	"commands/write-plan.md",
+] as const;
 
 /**
  * Assets that must be overwritten on every install, even if the user has a copy.
  * Used when the shipped version has critical fixes that override user customizations.
  * Remove entries once the fix has been deployed long enough.
  */
-const FORCE_UPDATE_ASSETS = ["commands/oc-configure.md"] as const;
+const FORCE_UPDATE_ASSETS = [] as const;
 
 export interface InstallResult {
 	readonly copied: readonly string[];

package/src/tools/doctor.ts

@@ -28,7 +28,7 @@ interface DoctorOptions {
  */
 const FIX_SUGGESTIONS: Readonly<Record<string, string>> = Object.freeze({
 	"config-validity":
-		"Run /oc-configure to reconfigure, or delete ~/.config/opencode/opencode-autopilot.json to reset",
+		"Run `bunx @kodrunhq/opencode-autopilot configure` to reconfigure, or delete ~/.config/opencode/opencode-autopilot.json to reset",
 	"agent-injection": "Restart OpenCode to trigger agent re-injection via config hook",
 	"asset-directories": "Restart OpenCode to trigger asset reinstallation",
 });

package/src/tools/quick.ts

@@ -21,7 +21,7 @@ interface QuickArgs {
 }
 
 /**
- * Core logic for the /quick command.
+ * Core logic for the /oc-quick command.
  * Creates a pipeline state that starts at PLAN (skipping discovery phases),
  * then delegates to orchestrateCore to continue the pipeline.
  */
@@ -30,7 +30,7 @@ export async function quickCore(args: QuickArgs, artifactDir: string): Promise<s
 	if (!args.idea || args.idea.trim().length === 0) {
 		return JSON.stringify({
 			action: "error",
-			message: "No idea provided. Usage: /quick <describe the task>",
+			message: "No idea provided. Usage: /oc-quick <describe the task>",
 		});
 	}
 
@@ -64,7 +64,7 @@ export async function quickCore(args: QuickArgs, artifactDir: string): Promise<s
 				phase: "PLAN",
 				agent: "oc-quick",
 				decision: "Skip discovery phases",
-				rationale: "Quick task mode: user explicitly requested simplified pipeline via /quick",
+				rationale: "Quick task mode: user explicitly requested simplified pipeline via /oc-quick",
 			},
 		],
 		confidence: [],

package/assets/commands/oc-configure.md

@@ -1,27 +0,0 @@
----
-description: Configure opencode-autopilot model assignments for each agent group
-agent: autopilot
----
-Model configuration uses an interactive terminal wizard with searchable
-model selection. This cannot be done inside the OpenCode TUI — it requires
-a separate terminal.
-
-Tell the user to open a terminal and run:
-
-```
-bunx @kodrunhq/opencode-autopilot configure
-```
-
-This will:
-1. Discover all available models from their configured providers
-2. Walk through each of the 8 agent groups with a searchable model picker
-3. For each group, select a primary model and optional fallback models
-4. Check adversarial diversity (different families for groups that review each other)
-5. Save the configuration
-
-After running the wizard, tell the user to restart OpenCode to pick up
-the new model assignments.
-
-Do NOT attempt to configure models through the oc_configure tool's assign
-subcommand directly. The interactive wizard is the supported configuration
-method.