@kitn.ai/ui 0.28.0 → 0.30.0

package/src/wire/encode-probe.ts

@@ -1,214 +0,0 @@
-// The encoders' diagnostic ledger: what went in, what came out, what did not.
-//
-// SEPARATE FROM encode.ts on purpose, and the reason is a guard rather than
-// tidiness. `lint:silent-drops` holds every function in `src/wire/` that
-// discriminates a `MessagePart` responsible for all six variants, and it is
-// right to. Nothing in this file discriminates one: every entry point takes the
-// variant as a STRING, read at the call site out of a branch that had already
-// discriminated it. So instrumenting the drops cannot introduce a new switch to
-// go stale when a seventh variant lands, and the parts that reach `dropped()`
-// are typed `unknown` so they cannot be inspected here even by accident.
-//
-// ZERO COST WITH NO SUBSCRIBER. The encoders build a probe only inside a
-// `wireDiagnosticsActive()` branch and reach it through `probe?.`, so with
-// nobody listening the whole ledger is one symbol read per encode and a handful
-// of skipped optional calls.
-//
-// SSR: no window, no globals at module scope. The TextEncoder is built on first
-// use, the same rule `read.ts` follows.
-import {
-  emitWireDiagnostic,
-  wirePayloadActive,
-  withPayload,
-  type EncodeAttachmentReport,
-} from './diagnostics';
-
-/** Built on first use and cached -- never at module scope, so this module keeps
- *  importing cleanly in a runtime that lacks the global. Only ever reached from
- *  inside an active-diagnostics branch. */
-let encoder: TextEncoder | undefined;
-
-/**
- * UTF-8 byte length of the encoded body, or undefined when it cannot be one.
- *
- * ★ ONLY CALLED WHEN PAYLOAD CAPTURE IS ON, i.e. when the body is being
- * materialized for a subscriber anyway. `base64Bytes` below refuses to decode a
- * 40 MB attachment to count it, on the grounds that the diagnostic would cost
- * more than the encode it is watching -- and stringifying the whole body to
- * produce one number is that same mistake one level up. With payload off the
- * field is OMITTED, which reads as "not reported" under the absence rule.
- *
- * Measured against the built bundle, subscribed with payload OFF, on a thread
- * of ten 1 MB attachments whose bare encode is 4.2 ms: ungated the
- * instrumentation cost +36.6 ms and +0.9 MB of heap; gated it costs +5.8 ms and
- * no measurable heap. (Upper bounds -- the box was not idle. `--expose-gc`, 15
- * runs, `scripts/`-adjacent harness in the PR.)
- *
- * NOT REPLACED BY AN ESTIMATE. A number that looks like a measurement and is
- * not is worse than an absent field, and a size threshold would make the
- * field's presence depend on how big the body happened to be -- which is the
- * one thing a reader would then be unable to conclude anything from.
- *
- * `JSON.stringify` is not total either: a circular `tool.output` or a BigInt
- * anywhere in a host's own data throws, and a diagnostic must never be the thing
- * that breaks an encode. That case goes absent for the same reason.
- */
-function bodyBytes(body: unknown): number | undefined {
-  try {
-    encoder ??= new TextEncoder();
-    return encoder.encode(JSON.stringify(body)).length;
-  } catch {
-    return undefined;
-  }
-}
-
-/**
- * Bytes a base64 payload stands for, WITHOUT decoding it.
- *
- * Four base64 characters carry three bytes, less the padding. Decoding a 40 MB
- * attachment to count it would make the diagnostic more expensive than the
- * encode it is watching.
- *
- * ★ THIS IS AN O(n) SCAN AND THERE IS NO EXACT WAY AROUND IT -- about 0.43 ms
- * per MB of attachment. THAT IS WHY ITS CALLER IS PAYLOAD-GATED (see `bytesOf`
- * in encode.ts): the thread is re-encoded every turn, so the scan is a
- * recurring per-turn cost rather than a one-off, and unbounded-per-turn is what
- * fails "cheap enough to leave on". With payload off this is never called; with
- * payload on it runs and the number is exact.
- *
- * THE ALTERNATIVE WAS NOT TO GUESS, and three candidates were measured before
- * settling on gating instead:
- *
- *   · A charCodeAt counting loop -- 7x SLOWER on the shape that actually occurs
- *     (a `data:` URI, no whitespace): 2.77 ms vs 0.61 ms per 1.4 MB. It avoids
- *     a copy that a whitespace-free `.replace` never makes, because V8 returns
- *     the original string when the pattern does not match. Strictly worse.
- *   · Native whitespace `.test()` then O(1) arithmetic on `.length` -- exact,
- *     and identical in time (0.60 ms), because the test is the same full scan.
- *     No win worth the extra branch.
- *   · Probing only a prefix for whitespace, then O(1) arithmetic -- 170x faster
- *     (0.0036 ms) and REJECTED anyway: it assumes whitespace is periodic line
- *     wrapping, so a payload whose only whitespace sits past the probe window
- *     is silently OVER-counted. That is an estimate wearing a measurement's
- *     clothes, which is the one thing a size field must never be.
- *
- * So the resolution is exact-but-gated rather than always-on-but-approximate. A
- * cheaper counter is welcome; a less truthful one is not, and `base64-bytes.
- * test.ts` pins the arithmetic against a real decode so any replacement has to
- * prove it is the same function rather than merely a plausible one.
- */
-export function base64Bytes(data: string): number {
-  const clean = data.replace(/\s/g, '');
-  if (clean === '') return 0;
-  const pad = clean.endsWith('==') ? 2 : clean.endsWith('=') ? 1 : 0;
-  return Math.max(0, Math.floor((clean.length * 3) / 4) - pad);
-}
-
-export interface EncodeProbe {
-  /** One part seen in the thread. `variant` is `part.type`, read at a site that
-   *  has the part in hand -- this function never looks. */
-  seen(variant: string): void;
-  /** One part that reached the wire. */
-  encoded(variant: string): void;
-  /** One part that did NOT. `part` is carried only to be published under the
-   *  payload key, and is `unknown` so it cannot be inspected here. */
-  dropped(
-    variant: string,
-    reason: string,
-    messageIndex: number,
-    partIndex: number,
-    part: unknown,
-  ): void;
-  /** One `file` part's outcome, plus the filename held back for the payload
-   *  key. Called exactly once per file part, whatever became of it. */
-  attachment(report: EncodeAttachmentReport, filename?: string): void;
-  /** Emit `encode.request`. Called once, after the body is built. */
-  finish(
-    format: 'openai' | 'anthropic',
-    threadMessages: number,
-    body: ReadonlyArray<{ role: string }>,
-  ): void;
-}
-
-/**
- * A ledger for one encode call.
- *
- * Built ONLY inside an active-diagnostics branch. It holds counts and, for the
- * payload key, filenames; it never holds message text.
- *
- * NO `streamId`, deliberately. An encode is not a read: it happens before there
- * is a response to correlate to, and minting an id here would invent a
- * relationship the kit cannot vouch for. `traceId`/`label` DO carry, because
- * those are the app's own declaration and the app is the one layer that knows
- * the encoded request and the read that answered it are the same turn.
- */
-export function createEncodeProbe(opts: { traceId?: string; label?: string }): EncodeProbe {
-  const correlation = {
-    ...(opts.traceId !== undefined ? { traceId: opts.traceId } : {}),
-    ...(opts.label !== undefined ? { label: opts.label } : {}),
-  };
-  const partsIn: Record<string, number> = {};
-  const partsEncoded: Record<string, number> = {};
-  const attachments: EncodeAttachmentReport[] = [];
-  const filenames: Array<{ filename?: string }> = [];
-
-  const bump = (into: Record<string, number>, key: string) => {
-    into[key] = (into[key] ?? 0) + 1;
-  };
-
-  return {
-    seen: (variant) => bump(partsIn, variant),
-    encoded: (variant) => bump(partsEncoded, variant),
-    dropped(variant, reason, messageIndex, partIndex, part) {
-      emitWireDiagnostic({
-        type: 'encode.dropped',
-        t: Date.now(),
-        ...correlation,
-        variant,
-        count: 1,
-        messageIndex,
-        partIndex,
-        reason,
-        // The part itself, by reference and unread. This function does not know
-        // what a part is and must not: knowing would mean discriminating one.
-        ...withPayload(() => ({ part })),
-      });
-    },
-    attachment(report, filename) {
-      attachments.push(report);
-      // Positionally aligned with `attachments`, so a panel with the payload key
-      // turned on can name the file in row N without the name ever sitting
-      // beside the metadata.
-      filenames.push(filename !== undefined ? { filename } : {});
-    },
-    finish(format, threadMessages, body) {
-      const byRole: Record<string, number> = {};
-      for (const message of body) bump(byRole, message.role);
-      // Gated: measuring costs a full serialization of every inlined
-      // attachment, so it happens only when the body is already being
-      // materialized for the payload key. See `bodyBytes`.
-      const bytes = wirePayloadActive() ? bodyBytes(body) : undefined;
-      emitWireDiagnostic({
-        type: 'encode.request',
-        t: Date.now(),
-        ...correlation,
-        format,
-        threadMessages,
-        wireMessages: body.length,
-        // Stated, not omitted: zero is the answer that tells a developer the
-        // system prompt lives somewhere the kit cannot see.
-        systemMessages: byRole.system ?? 0,
-        byRole,
-        partsIn,
-        partsEncoded,
-        attachments,
-        ...(bytes !== undefined ? { bytes } : {}),
-        // The encoded body, and the filenames held back from the ledger above.
-        ...withPayload(() => ({
-          body,
-          ...(filenames.length > 0 ? { attachments: filenames } : {}),
-        })),
-      });
-    },
-  };
-}