@kestrelfi/lyc-sdk 1.0.1 → 1.0.3

package/src/client/types/planTypes/collectInterest.ts

@@ -1,97 +0,0 @@
-import type { BN } from "@anchor-lang/core";
-import type { Address } from "@solana/kit";
-import type { CpiData } from "common";
-import type { PricedMint } from "../general";
-import type { SingleCpiExecutionPlan } from "./common";
-
-/**
- * Deterministic inputs for deriving a `collect_interest` plan.
- */
-export interface CollectInterestPlanParams {
-  /** Yielding bank whose active carry position should be partially redeemed. */
-  yieldingBank: Address;
-  /**
-   * Minimum net yield (in USD) below which collection is skipped.
-   * Prevents wasteful swaps when accrued interest is negligible.
-   * Value is in human-readable USD (e.g. 0.5 = $0.50).
-   */
-  minYieldUsd?: number;
-}
-
-/**
- * One yielding-bank holding that should be redeemed during interest collection.
- */
-export interface CollectInterestHoldingPlan {
-  /** Mint held by the yielding bank allocation. */
-  mint: Address;
-  /** Amount to redeem in raw base units for this holding. */
-  amount: BN;
-  /** Whether this holding came from the bank's base-asset slot. */
-  isBaseAsset: boolean;
-}
-
-/**
- * Deterministic `collect_interest` plan produced by `client.planner`.
- *
- * This captures protocol-derived values only: the active carry position,
- * shares to burn, and the ordered bank holdings that should be redeemed.
- * It intentionally does not encode swap venue or routing policy.
- */
-export interface CollectInterestPlan {
-  /** Token PDA whose carry position is collecting accrued yield. */
-  token: Address;
-  /** Yielding bank the active carry position is allocated to. */
-  yieldingBank: Address;
-  /** Base mint configured on the yielding bank. */
-  baseMint: Address;
-  /** Default redemption asset that accrued interest is collected from. */
-  redemption: PricedMint;
-  /** Token collateral asset that collection must ultimately end in. */
-  collateral: PricedMint;
-  /** Index of the active `debtCarry` entry on the token account. */
-  carryIndex: number;
-  /** Number of carry-position shares the program should burn. */
-  sharesToBurn: BN;
-  /** USD value represented by the burned shares, in program-scale units. */
-  sharesBurnedValueUsd: BN;
-  /** Ordered yielding-bank holdings to redeem before final collateral settlement. */
-  holdingsToRedeem: CollectInterestHoldingPlan[];
-}
-
-/**
- * Caller-controlled routing inputs for turning a deterministic collect-interest
- * plan into concrete swap CPI data.
- */
-export interface CollectInterestRouteBuilderParams {
-  /** Final output mint. Defaults to `plan.collateral.mint`. */
-  outputMint?: Address;
-  /** Slippage tolerance applied to all collect-interest swaps. Defaults to `100`. */
-  slippageBps?: number;
-}
-
-/**
- * Manual CPI inputs for callers that already know the exact swap sequence they
- * want `collect_interest` to execute.
- */
-export interface CollectInterestBuilderParams {
-  /** Yielding bank whose shares will be redeemed. */
-  yieldingBank: Address;
-  /** Prebuilt CPI descriptors that swap redeemed assets into collateral. */
-  cpiData: CpiData[];
-}
-
-/**
- * Fully executable `collect_interest` plan produced by `client.routeBuilder`.
- *
- * Extends the deterministic planner result with the exact CPI sequence,
- * pre-instructions, and initial accounts required by the final tx composer.
- */
-export interface CollectInterestExecutionPlan extends CollectInterestPlan, SingleCpiExecutionPlan {}
-
-/**
- * Precomputed execution-plan wrapper accepted by `client.tx.collectInterest.getTx({...})`.
- */
-export interface CollectInterestTxPlanParams {
-  /** Route-builder result previously returned by `client.routeBuilder.buildCollectInterestRoutePlan()`. */
-  plan: CollectInterestExecutionPlan;
-}

package/src/client/types/planTypes/common.ts

@@ -1,31 +0,0 @@
-import type { Instruction } from "@solana/kit";
-import type { CpiData, CustomAccountMeta } from "common";
-
-/**
- * Shared fields carried by normalized execution plans.
- *
- * These values are produced before the transaction layer resolves remaining
- * account refs and ATA creation instructions.
- */
-export interface PlannedInstructionBase {
-  /** Pre-instructions that must run before ATA creation or the main instruction. */
-  preInstructions: Instruction[];
-  /** Accounts that must lead the remaining-accounts pool before CPI accounts are appended. */
-  initialAccounts: CustomAccountMeta[];
-}
-
-/**
- * Execution-plan shape for instructions that use a single CPI ref group.
- */
-export interface SingleCpiExecutionPlan extends PlannedInstructionBase {
-  /** Ordered CPI descriptors consumed by one instruction-level refs input. */
-  cpiData: CpiData[];
-}
-
-/**
- * Execution-plan shape for instructions that use multiple CPI ref groups.
- */
-export interface GroupedCpiExecutionPlan extends PlannedInstructionBase {
-  /** Ordered CPI groups where each group maps to a distinct refs input. */
-  cpiDataGroups: CpiData[][];
-}

package/src/client/types/planTypes/decreaseCarryPosition.ts

@@ -1,134 +0,0 @@
-import type { Address } from "@solana/kit";
-import type BN from "bn.js";
-import type { LendingPlatformData, LpInstructionsBase } from "lending-platforms";
-import type { CpiData, Environment } from "common";
-import type { GroupedCpiExecutionPlan } from "./common";
-
-/**
- * Mutually exclusive ways to steer repay sizing. Omit to use default obligation-relative
- * sizing (`LycLendingPositionManager.calcDebtChangeAmount` with no utilization target).
- *
- * `DecreaseCarryPositionPlan.targetUtilizationRateBps` is set when the on-chain instruction
- * must validate post-repay utilization against an explicit bps value (manager signer):
- * - `explicitTargetUtilization` — caller supplies bps for both sizing and the instruction.
- * - `collateralWithdrawal` with `allowBelowTargetOnChain` — sizing uses
- *   `calcPreWithdrawalTargetUtilizationRateBps`; set the flag when this DCP must pass derived
- *   utilization bps on-chain because post-repay utilization will sit **below** the position's
- *   configured `targetUtilizationRateBps` (e.g. pre-rebalance unwind).
- */
-export type DecreaseCarryRepaySteering =
-  | {
-      mode: "collateralWithdrawal";
-      /** Collateral (UI units) removed after this repay. */
-      collateralWithdrawalUiAmount: number;
-      /**
-       * Desired utilization after the later collateral withdrawal. Defaults to the
-       * position's configured target.
-       */
-      postWithdrawalTargetUtilizationRateBps?: number;
-      /**
-       * When true, allow passing derived utilization bps on-chain (same bps as sizing) so a
-       * manager `decrease_carry_position` can validate when post-repay utilization sits **below**
-       * the position's configured `targetUtilizationRateBps` (e.g. pre-rebalance unwind).
-       */
-      allowBelowTargetOnChain?: boolean;
-    }
-  | {
-      mode: "explicitTargetUtilization";
-      /**
-       * Caller supplies utilization (bps) for repay sizing and on-chain post-repay check (manager signer).
-       * Often equals or is derived from the position's configured target; this mode passes bps through
-       * explicitly, unlike `collateralWithdrawal`, which derives a target from UI collateral out.
-       */
-      targetUtilizationRateBps: number;
-    };
-
-/**
- * Deterministic inputs for deriving a `decrease_carry_position` plan.
- *
- * Pass this to `client.planner.buildDecreaseCarryPositionPlan()` when you want
- * the SDK to compute repay math, swap requirements, and grouped CPI inputs.
- */
-export interface DecreaseCarryPositionBuilderParams {
-  /** Index into the token's `lendingPositions` array for the position to repay. */
-  lendingPositionIndex: number;
-  /** Yielding bank PDA holding the funds that will be redeemed or swapped for repayment. */
-  yieldingBank: Address;
-  /** Lending-platform instruction client used to build the repay CPI sequence. */
-  lendingIx: LpInstructionsBase<LendingPlatformData>;
-  /** Deployment environment used for off-chain price fetches during repay sizing. */
-  environment?: Environment;
-  /** Slippage tolerance for any required DCP swap, in basis points. Defaults to `40`. */
-  swapSlippageBps?: number;
-  /** DEX labels to exclude from any required DCP swap (e.g. venues that failed a prior attempt). */
-  swapExcludeDexes?: string[];
-  /**
-   * Optional override for the asset redeemed from the yielding bank.
-   *
-   * Defaults to the bank's `defaultRedemptionMint`. On-chain permission checks
-   * may reject non-manager callers that override this away from the configured
-   * default redemption mint.
-   */
-  sourceMint?: Address;
-  /**
-   * Optional transaction identifier shared with the lending client.
-   *
-   * Reuse a parent transaction ID when composing this flow into a larger
-   * transaction so lending pre-instructions are not duplicated.
-   */
-  txId?: string;
-  /**
-   * Steers how the planner picks the obligation / repay size. At most one variant;
-   * omit for default sizing.
-   */
-  repaySteering?: DecreaseCarryRepaySteering;
-  /**
-   * When true (e.g. burn-token liquidity management), non-manager callers may execute
-   * the resulting plan subject to the instruction's post-repay validation.
-   */
-  permissionlessOperation?: boolean;
-}
-
-/**
- * Precomputed plan wrapper accepted by `client.tx.decreaseCarryPosition.getTx({...})`.
- */
-export interface DecreaseCarryPositionTxPlanParams {
-  /** Planner result previously returned by `client.planner.buildDecreaseCarryPositionPlan()`. */
-  plan: DecreaseCarryPositionPlan;
-}
-
-/**
- * Deterministic execution plan for `decrease_carry_position`.
- *
- * Produced by `client.planner.buildDecreaseCarryPositionPlan()` and later
- * consumed by `client.tx.decreaseCarryPosition.getTx({...})`. This keeps repay math,
- * swap decisions, and grouped CPI assembly out of the transaction composer.
- */
-export interface DecreaseCarryPositionPlan extends GroupedCpiExecutionPlan {
-  /** Optional prerequisite CPIs executed before any lending-position refresh. */
-  tokenPrerequisiteCpis?: CpiData[];
-  /**
-   * When set, passed through to `decrease_carry_position` for manager-only
-   * post-repay validation. Populated from explicit steering or from
-   * `collateralWithdrawal` + `allowBelowTargetOnChain` (derived bps = sizing target).
-   */
-  targetUtilizationRateBps?: number;
-  /** Index into the token account's `lendingPositions` array. */
-  lendingPositionIndex: number;
-  /** Raw debt repayment amount in base units. */
-  repayAmount: BN;
-  /**
-   * Yielding-bank holding index redeemed as the swap source.
-   *
-   * Omitted when no preliminary swap is needed because the debt asset is
-   * already held directly by the yielding bank.
-   */
-  sourceAssetHoldingIndex?: number;
-  /** Yielding bank refreshed immediately before the instruction executes. */
-  yieldingBank: Address;
-  /**
-   * When set, `decrease_carry_position` / burn unwind must encode `repay_amount` as null.
-   * This is only needed for flows where the exact repay amount must be derived on-chain.
-   */
-  omitOnChainRepayAmount?: boolean;
-}

package/src/client/types/planTypes/index.ts

@@ -1,3 +0,0 @@
-export * from "./collectInterest";
-export * from "./common";
-export * from "./decreaseCarryPosition";

package/src/client/types/tx.ts

@@ -1,409 +0,0 @@
-import type { BN } from "@anchor-lang/core";
-import type { Address } from "@solana/kit";
-import type {
-  AnchorOracleType,
-  CpiData,
-  SwapClient,
-  TransactionCacheInvalidation,
-  TransactionPlan as BaseTransactionPlan,
-} from "common";
-import { YieldingBankAllocationConfig } from "./ix";
-import type {
-  DecreaseCarryPositionTxPlanParams,
-  DecreaseCarryRepaySteering,
-} from "./planTypes/decreaseCarryPosition";
-import type { TokenLpPositionAccountOverrides } from "./ix";
-
-/**
- * Fully composed transaction output ready to pass to `sendTransaction`.
- */
-export interface LongYieldCarryTransactionPlan extends BaseTransactionPlan {
-  /**
-   * Cache entries that should be cleared only after the transaction confirms.
-   *
-   * This keeps transaction builders pure while still letting callers invalidate
-   * stale off-chain snapshots when a successful on-chain write changes account
-   * topology (for example first-time lending account setup).
-   */
-  postSuccessCacheInvalidations?: TransactionCacheInvalidation[];
-  /** Optional lending-client transaction id reused across composed plans. */
-  txId?: string;
-  /** Optional diagnostics for operator-facing scripts and services. */
-  debug?: LongYieldCarryTransactionPlanDebug;
-}
-
-export interface LongYieldCarryTransactionPlanDebug {
-  processAsyncBurn?: {
-    epochId: bigint;
-    sequence: bigint;
-    request: Address;
-    user: Address;
-    /** How collateral is delivered when the request is processed. */
-    collateralDelivery: "nativeSol" | "tokenAta";
-    /** Populated for non-native collateral mints. */
-    userCollateralAccount?: Address;
-    /** Populated for wrapped SOL collateral (request-scoped WSOL escrow). */
-    requestCollateralAccount?: Address;
-  };
-}
-
-// =============================================================================
-// mint_token
-// =============================================================================
-
-export interface MintTokenTxParams {
-  /**
-   * Collateral amount to deposit in base units (e.g. lamports).
-   *
-   * Pass `"all"` to deposit the entire collateral ATA balance. The on-chain
-   * instruction resolves `u64::MAX` to the ATA's live balance at execution time.
-   */
-  depositAmount: BN | "all";
-}
-
-// =============================================================================
-// burn_token
-// =============================================================================
-
-export interface BurnTokenTxParams {
-  /**
-   * yToken amount to burn in base units (e.g. lamports for a 9-decimal token).
-   *
-   * Pass `"all"` to burn every yToken in the user's ATA. The on-chain
-   * instruction resolves `u64::MAX` to the ATA's live balance at execution time.
-   */
-  burnAmount: BN | number | "all";
-  /**
-   * Override the auto-derived redemption epoch ID. Defaults to
-   * {@link currentEpochId} (floored to the nearest minute).
-   */
-  epochId?: BN | number;
-  /**
-   * Override the auto-derived request sequence within the epoch. Defaults to
-   * the next available sequence read from on-chain epoch state (or 0 for a
-   * fresh epoch).
-   */
-  requestSequence?: BN | number;
-}
-
-// =============================================================================
-// rebalance_yielding_bank
-// =============================================================================
-
-export interface RebalanceSwapSpec {
-  /**
-   * Swap client used to quote and build CPI data for this rebalance leg.
-   * When omitted, `getRebalanceYieldingBankTx` uses the transaction client's
-   * default aggregate swap client (Perena for USD* ↔ supported stables, Jupiter otherwise).
-   */
-  swapClient?: SwapClient;
-  /** Mint being sold. */
-  inputMint: Address;
-  /** Mint being bought. */
-  outputMint: Address;
-  /** Exact input or requested quote amount, depending on the swap client. */
-  amount: number;
-  /** Slippage tolerance in basis points. Defaults to the caller's chosen swap behavior. */
-  slippageBps?: number;
-}
-
-/**
- * Extra account that backs an asset holding's off-ATA liquidity during refresh.
- *
- * Example: a Perena withdrawal queue that temporarily escrows USD*-J shares after
- * `request_unstake_junior`, while the YieldingBank still economically owns them.
- */
-export interface YieldingBankExternalLiquiditySource {
-  /** Asset mint whose refresh should include this external source. */
-  mint: Address;
-  /** Account holding the pending balance for that mint. */
-  account: Address;
-}
-
-/**
- * Inputs for `client.tx.rebalanceYieldingBank.getTx({...})`.
- *
- * The transaction must be signed by the program's manager; ATA setup in the plan uses the
- * client's environment manager address.
- */
-export interface RebalanceYieldingBankTxParams {
-  /** Pre-built CPI descriptors (one per swap / deposit step). */
-  cpiData?: CpiData[];
-  /**
-   * High-level swap specifications. Each is resolved into CPI data by calling
-   * `getQuote` + `getSwapCpiData` on the leg's `swapClient`, or the SDK aggregate
-   * swap client when `swapClient` is omitted. Resolved CPI data is appended after
-   * any explicit `cpiData` entries.
-   */
-  swaps?: RebalanceSwapSpec[];
-  /**
-   * Optional new holding or external position to register before the
-   * rebalance executes.
-   */
-  newAllocation?: {
-    config: YieldingBankAllocationConfig;
-  };
-}
-
-// =============================================================================
-// refresh_tokens
-// =============================================================================
-
-export interface RefreshTokensTxParams {
-  /** Token PDA addresses to refresh. */
-  tokens: Address[];
-  /**
-   * When true, always prepend `refresh_yielding_bank` for each bank referenced
-   * by the token's active carry positions, even if the bank appears fresh
-   * client-side.
-   *
-   * When false (default), the builder skips yielding-bank refreshes whose
-   * cached `lastRefreshedTs` is still inside the normal freshness window.
-   */
-  alwaysRefreshYieldingBanks?: boolean;
-}
-
-// =============================================================================
-// top_up_unlent_reserves
-// =============================================================================
-
-export interface TopUpUnlentReservesTxParams {
-  /** Index into the token's lending_positions array for the source position. */
-  lendingPositionIndex: number;
-  /**
-   * Withdrawal amount in UI units (e.g. 1.5 for 1.5 SOL).
-   * Pass `"all"` to withdraw the entire lending position's collateral.
-   */
-  uiAmount: number | "all";
-  /** Optional redemption epoch PDA to credit with the withdrawn amount. */
-  redemptionEpoch?: Address;
-  /** Optional txId reused across composed plans in the same transaction. */
-  txId?: string;
-}
-
-// =============================================================================
-// process_async_burn
-// =============================================================================
-
-export interface ProcessAsyncBurnTxParams {
-  /** Epoch ID (the minute-bucketed timestamp used when the epoch was created). */
-  epochId: bigint | number;
-  /** FIFO sequence number of the request to process within the epoch. */
-  sequence: bigint | number;
-}
-
-// =============================================================================
-// deposit_unlent_collateral
-// =============================================================================
-
-export interface DepositUnlentCollateralTxParams {
-  /** Index into the token's lending_positions array for the target position. */
-  lendingPositionIndex: number;
-  /**
-   * Deposit amount in UI units (e.g. 1.5 for 1.5 SOL).
-   * Required unless `depositAll` is true.
-   */
-  uiAmount?: number;
-  /**
-   * When true, deposits all remaining unlent collateral. The token account
-   * is fetched to determine the exact amount, so `uiAmount` can be omitted.
-   */
-  depositAll?: boolean;
-  /** Optional txId reused across composed plans in the same transaction. */
-  txId?: string;
-}
-
-// =============================================================================
-// increase_carry_position
-// =============================================================================
-
-export interface IncreaseCarryPositionTxParams {
-  /** Index into the token's lending_positions array for the position to borrow against. */
-  lendingPositionIndex: number;
-  /** The YieldingBank PDA receiving the borrow proceeds. */
-  yieldingBank: Address;
-  /** Borrow amount in UI units (e.g. 100 for 100 USDC). */
-  uiAmount: number;
-  /** Optional txId reused across composed plans in the same transaction. */
-  txId?: string;
-}
-
-/**
- * Inputs for `client.tx.rebalanceToken.getTx({...})`.
- *
- * When the source lending position would exceed target utilization after the
- * collateral withdrawal, the builder automatically constructs the flash-loan-
- * wrapped variant: flash-borrow source debt mint → repay source → withdraw
- * collateral → deposit to destination → borrow destination debt mint →
- * exact-out swap back to source debt mint → flash-repay.
- */
-export interface RebalanceTokenTxParams {
-  /** Index into the token's lending_positions array for the position to rebalance in-place. */
-  lpIndex: number;
-  /**
-   * Target debt mint. The position's current debt is fully repaid via flash loan and this mint
-   * is borrowed instead on the same lending position. The builder resolves the corresponding
-   * reserve via `fetchReserveByMint` and the oracle via the oracle registry.
-   */
-  destinationDebtMint: Address;
-  /**
-   * Collateral amount used for destination borrow capacity sizing, in UI units. Pass `"all"` to
-   * size based on the full current source debt (uses the platform's repay-all sentinel so
-   * on-chain interest accrual between snapshot and landing cannot leave dust).
-   */
-  uiAmount: number | "all";
-  /** Slippage tolerance for the exact-out flash swap, in basis points. Defaults to 100. */
-  swapSlippageBps?: number;
-  /**
-   * Maximum acceptable execution cost (route fees + price impact) of the
-   * rebalance swap quote vs the oracle-fair cross rate, in bps (see
-   * `FlashRebalanceParams.maxSwapCostBps`). When breached, `getTx` throws
-   * `FlashRebalanceSwapCostExceededError` instead of returning a plan.
-   * Unset = no limit.
-   */
-  maxSwapCostBps?: number;
-  /**
-   * Maximum acceptable market basis between the two debt stables (oracle-fair
-   * cross rate vs 1:1), in bps, either direction (see
-   * `FlashRebalanceParams.maxMarketBasisBps`). Unset = no limit.
-   */
-  maxMarketBasisBps?: number;
-  /** Optional explicit overrides for the LP refresh accounts (user account, collateral reserve, debt oracle). */
-  lpPosition?: TokenLpPositionAccountOverrides;
-  /**
-   * Optional transaction identifier shared with lending clients so composed
-   * flows can hoist top-level pre-instructions.
-   */
-  txId?: string;
-  /**
-   * Yielding bank that absorbs the destination-debt slippage dust after the
-   * exact-out swap. Defaults to the first active yielding bank recorded in the
-   * token's `debtCarry` entries.
-   */
-  yieldingBank?: Address;
-}
-
-export interface DecreaseCarryPositionTxBuilderParams {
-  /** Index into the token's `lendingPositions` array for the position to repay. */
-  lendingPositionIndex: number;
-  /** Yielding bank PDA holding the funds that will be redeemed or swapped for repayment. */
-  yieldingBank: Address;
-  /** Slippage tolerance for any required DCP swap, in basis points. Defaults to `40`. */
-  swapSlippageBps?: number;
-  /** DEX labels to exclude from any required DCP swap (e.g. venues that failed a prior attempt). */
-  swapExcludeDexes?: string[];
-  /**
-   * Optional override for the asset redeemed from the yielding bank.
-   *
-   * Defaults to the bank's `defaultRedemptionMint`. On-chain permission checks
-   * may reject non-manager callers that override this away from the configured
-   * default redemption mint.
-   */
-  sourceMint?: Address;
-  /**
-   * Optional transaction identifier shared with the lending client.
-   *
-   * Reuse a parent transaction ID when composing this flow into a larger
-   * transaction so lending pre-instructions are not duplicated.
-   */
-  txId?: string;
-  /** See {@link DecreaseCarryRepaySteering}. */
-  repaySteering?: DecreaseCarryRepaySteering;
-  /**
-   * Same as {@link DecreaseCarryPositionBuilderParams.permissionlessOperation}: when true,
-   * non-manager callers may execute the resulting plan subject to post-repay validation.
-   */
-  permissionlessOperation?: boolean;
-}
-
-/**
- * Inputs accepted by `client.tx.decreaseCarryPosition.getTx({...})`.
- *
- * Pass raw builder params to have the SDK plan the instruction for you, or
- * pass `{ plan }` when you have pre-built a plan via `buildDecreaseCarryPositionPlan`.
- */
-export type DecreaseCarryPositionTxParams =
-  | DecreaseCarryPositionTxBuilderParams
-  | DecreaseCarryPositionTxPlanParams;
-
-// =============================================================================
-// recollateralize_loss
-// =============================================================================
-
-/**
- * Inputs for `client.tx.recollateralizeLoss.getTx({...})`.
- *
- * The transaction builder internally:
- *  1. Computes the debt excess (total_debt − total_carry) from on-chain state.
- *  2. Quotes a collateral → debt swap to cover that excess.
- *  3. Checks whether withdrawing the required collateral would push the LP
- *     above its target utilization rate. If so, prepends a
- *     `decrease_carry_position` sized to free the needed headroom.
- *  4. Builds the Withdraw → Swap → Repay CPI sequence for the main instruction.
- */
-export interface RecollateralizeLossTxParams {
-  /** Slippage tolerance for swaps (collateral → debt), in basis points. Defaults to 150. */
-  swapSlippageBps?: number;
-  /**
-   * Optional override for the asset redeemed from the yielding bank during DCP.
-   * Defaults to the bank's `defaultRedemptionMint`. Only used when a
-   * `decrease_carry_position` is needed to free collateral for the withdrawal.
-   */
-  sourceMint?: Address;
-  /** Optional txId shared with lending clients for pre-instruction deduplication. */
-  txId?: string;
-  /** Optional explicit overrides for LP refresh accounts. */
-  lpPosition?: TokenLpPositionAccountOverrides;
-}
-
-// =============================================================================
-// collect_interest
-// =============================================================================
-
-/**
- * Inputs accepted by `client.tx.collectInterest.getTx({...})`.
- */
-export interface CollectInterestTxParams {
-  /** Yielding bank whose carry position should collect accrued interest. */
-  yieldingBank: Address;
-  /** Slippage tolerance applied to all swaps. Defaults to 100 bps. */
-  slippageBps?: number;
-  /** Final output mint. Defaults to the token's collateral mint. */
-  outputMint?: Address;
-  /**
-   * Minimum net yield (in USD) below which collection is skipped.
-   * Prevents wasteful swaps when accrued interest is negligible.
-   * Value is in human-readable USD (e.g. 0.5 = $0.50).
-   */
-  minYieldUsd?: number;
-}
-
-// =============================================================================
-// claim_incentives
-// =============================================================================
-
-export interface ClaimIncentivesTxParams {
-  /** Index into the token's lending_positions array. */
-  lendingPositionIndex: number;
-  /** Incentive reward mint to harvest. */
-  incentiveMint: Address;
-  /**
-   * Pre-resolved farm and user-farm addresses for the claim CPI. When provided
-   * the builder skips the on-chain incentive lookup — required when the same
-   * incentive mint appears from multiple farms (obligation vs. direct).
-   */
-  claimAccounts?: { farm: Address; userFarm: Address };
-  /**
-   * Yielding bank that receives the claimed rewards. Defaults to the first
-   * active yielding bank recorded in the token's `debtCarry` entries.
-   */
-  yieldingBank?: Address;
-  /**
-   * Oracle pricing `incentiveMint`. Auto-resolved when the mint matches the
-   * debt of an active lending position or is in the shared mints registry;
-   * required otherwise.
-   */
-  incentiveOracle?: Address;
-  /** Oracle type for `incentiveOracle`. Auto-resolved when `incentiveOracle` is. */
-  incentiveOracleType?: AnchorOracleType;
-}