@keep-network/tbtc-v2 0.1.1-dev.71 → 0.1.1-dev.72

package/artifacts/solcInputs/{55619e5b15411ce6622d6da869c273a1.json → 55df7785455cbf6ded1b912686e91d3f.json}

@@ -164,7 +164,7 @@
       "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\nimport \"@keep-network/bitcoin-spv-sol/contracts/BytesLib.sol\";\n\nlibrary EcdsaLib {\n    using BytesLib for bytes;\n\n    /// @notice Converts public key X and Y coordinates (32-byte each) to a\n    ///         compressed public key (33-byte). Compressed public key is X\n    ///         coordinate prefixed with `02` or `03` based on the Y coordinate parity.\n    ///         It is expected that the uncompressed public key is stripped\n    ///         (i.e. it is not prefixed with `04`).\n    /// @param x Wallet's public key's X coordinate.\n    /// @param y Wallet's public key's Y coordinate.\n    /// @return Compressed public key (33-byte), prefixed with `02` or `03`.\n    function compressPublicKey(bytes32 x, bytes32 y)\n        internal\n        pure\n        returns (bytes memory)\n    {\n        bytes1 prefix;\n        if (uint256(y) % 2 == 0) {\n            prefix = hex\"02\";\n        } else {\n            prefix = hex\"03\";\n        }\n\n        return bytes.concat(prefix, x);\n    }\n}\n"
     },
     "contracts/bridge/BridgeState.sol": {
-      "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\nimport {IWalletRegistry as EcdsaWalletRegistry} from \"@keep-network/ecdsa/contracts/api/IWalletRegistry.sol\";\n\nimport \"./IRelay.sol\";\nimport \"./Deposit.sol\";\nimport \"./Redemption.sol\";\nimport \"./Fraud.sol\";\nimport \"./Wallets.sol\";\nimport \"./MovingFunds.sol\";\n\nimport \"../bank/Bank.sol\";\n\nlibrary BridgeState {\n    // TODO: Make parameters governable\n    struct Storage {\n        // Address of the Bank the Bridge belongs to.\n        Bank bank;\n        // Bitcoin relay providing the current Bitcoin network difficulty.\n        IRelay relay;\n        // ECDSA Wallet Registry contract handle.\n        EcdsaWalletRegistry ecdsaWalletRegistry;\n        // The number of confirmations on the Bitcoin chain required to\n        // successfully evaluate an SPV proof.\n        uint256 txProofDifficultyFactor;\n        // Address where the deposit and redemption treasury fees will be sent\n        // to. Treasury takes part in the operators rewarding process.\n        address treasury;\n        // The minimal amount that can be requested to deposit.\n        // Value of this parameter must take into account the value of\n        // `depositTreasuryFeeDivisor` and `depositTxMaxFee` parameters in order\n        // to make requests that can incur the treasury and transaction fee and\n        // still satisfy the depositor.\n        uint64 depositDustThreshold;\n        // Divisor used to compute the treasury fee taken from each deposit and\n        // transferred to the treasury upon sweep proof submission. That fee is\n        // computed as follows:\n        // `treasuryFee = depositedAmount / depositTreasuryFeeDivisor`\n        // For example, if the treasury fee needs to be 2% of each deposit,\n        // the `depositTreasuryFeeDivisor` should be set to `50` because\n        // `1/50 = 0.02 = 2%`.\n        uint64 depositTreasuryFeeDivisor;\n        // Maximum amount of BTC transaction fee that can be incurred by each\n        // swept deposit being part of the given sweep transaction. If the\n        // maximum BTC transaction fee is exceeded, such transaction is\n        // considered a fraud.\n        //\n        // This is a per-deposit input max fee for the sweep transaction.\n        uint64 depositTxMaxFee;\n        // Collection of all revealed deposits indexed by\n        // `keccak256(fundingTxHash | fundingOutputIndex)`.\n        // The `fundingTxHash` is `bytes32` (ordered as in Bitcoin internally)\n        // and `fundingOutputIndex` an `uint32`. This mapping may contain valid\n        // and invalid deposits and the wallet is responsible for validating\n        // them before attempting to execute a sweep.\n        mapping(uint256 => Deposit.DepositRequest) deposits;\n        // Indicates if the vault with the given address is trusted or not.\n        // Depositors can route their revealed deposits only to trusted vaults\n        // and have trusted vaults notified about new deposits as soon as these\n        // deposits get swept. Vaults not trusted by the Bridge can still be\n        // used by Bank balance owners on their own responsibility - anyone can\n        // approve their Bank balance to any address.\n        mapping(address => bool) isVaultTrusted;\n        // Maximum amount of the total BTC transaction fee that is acceptable in\n        // a single moving funds transaction.\n        //\n        // This is a TOTAL max fee for the moving funds transaction. Note\n        // that `depositTxMaxFee` is per single deposit and `redemptionTxMaxFee`\n        // if per single redemption. `movingFundsTxMaxTotalFee` is a total\n        // fee for the entire transaction.\n        uint64 movingFundsTxMaxTotalFee;\n        // The minimal satoshi amount that makes sense to be transferred during\n        // the moving funds process. Moving funds wallets having their BTC\n        // balance below that value can begin closing immediately as\n        // transferring such a low value may not be possible due to\n        // BTC network fees. The value of this parameter must always be lower\n        // than `redemptionDustThreshold` in order to prevent redemption requests\n        // with values lower or equal to `movingFundsDustThreshold`.\n        uint64 movingFundsDustThreshold;\n        // Time after which the moving funds process can be reported as\n        // timed out. It is counted from the moment when the wallet\n        // was requested to move their funds and switched to the MovingFunds\n        // state. Value in seconds.\n        uint32 movingFundsTimeout;\n        // The amount of stake slashed from each member of a wallet for a moving\n        // funds timeout.\n        uint96 movingFundsTimeoutSlashingAmount;\n        // The percentage of the notifier reward from the staking contract\n        // the notifier of a moving funds timeout receives. The value is in the\n        // range [0, 100].\n        uint256 movingFundsTimeoutNotifierRewardMultiplier;\n        // Maximum amount of the total BTC transaction fee that is acceptable in\n        // a single moved funds sweep transaction.\n        //\n        // This is a TOTAL max fee for the moved funds sweep transaction. Note\n        // that `depositTxMaxFee` is per single deposit and `redemptionTxMaxFee`\n        // if per single redemption. `movedFundsSweepTxMaxTotalFee` is a total\n        // fee for the entire transaction.\n        uint64 movedFundsSweepTxMaxTotalFee;\n        // Time after which the moved funds sweep process can be reported as\n        // timed out. It is counted from the moment when the recipient wallet\n        // was requested to sweep the received funds. Value in seconds.\n        uint32 movedFundsSweepTimeout;\n        // The amount of stake slashed from each member of a wallet for a moved\n        // funds sweep timeout.\n        uint96 movedFundsSweepTimeoutSlashingAmount;\n        // The percentage of the notifier reward from the staking contract\n        // the notifier of a moved funds sweep timeout receives. The value is\n        // in the range [0, 100].\n        uint256 movedFundsSweepTimeoutNotifierRewardMultiplier;\n        // Collection of all moved funds sweep requests indexed by\n        // `keccak256(movingFundsTxHash | movingFundsOutputIndex)`.\n        // The `movingFundsTxHash` is `bytes32` (ordered as in Bitcoin\n        // internally) and `movingFundsOutputIndex` an `uint32`. Each entry\n        // is actually an UTXO representing the moved funds and is supposed\n        // to be swept with the current main UTXO of the recipient wallet.\n        mapping(uint256 => MovingFunds.MovedFundsSweepRequest) movedFundsSweepRequests;\n        // The minimal amount that can be requested for redemption.\n        // Value of this parameter must take into account the value of\n        // `redemptionTreasuryFeeDivisor` and `redemptionTxMaxFee`\n        // parameters in order to make requests that can incur the\n        // treasury and transaction fee and still satisfy the redeemer.\n        // Additionally, the value of this parameter must always be greater\n        // than `movingFundsDustThreshold` in order to prevent redemption\n        // requests with values lower or equal to `movingFundsDustThreshold`.\n        uint64 redemptionDustThreshold;\n        // Divisor used to compute the treasury fee taken from each\n        // redemption request and transferred to the treasury upon\n        // successful request finalization. That fee is computed as follows:\n        // `treasuryFee = requestedAmount / redemptionTreasuryFeeDivisor`\n        // For example, if the treasury fee needs to be 2% of each\n        // redemption request, the `redemptionTreasuryFeeDivisor` should\n        // be set to `50` because `1/50 = 0.02 = 2%`.\n        uint64 redemptionTreasuryFeeDivisor;\n        // Maximum amount of BTC transaction fee that can be incurred by\n        // each redemption request being part of the given redemption\n        // transaction. If the maximum BTC transaction fee is exceeded, such\n        // transaction is considered a fraud.\n        //\n        // This is a per-redemption output max fee for the redemption\n        // transaction.\n        uint64 redemptionTxMaxFee;\n        // Time after which the redemption request can be reported as\n        // timed out. It is counted from the moment when the redemption\n        // request was created via `requestRedemption` call. Reported\n        // timed out requests are cancelled and locked TBTC is returned\n        // to the redeemer in full amount.\n        uint256 redemptionTimeout;\n        // The amount of stake slashed from each member of a wallet for a\n        // redemption timeout.\n        uint96 redemptionTimeoutSlashingAmount;\n        // The percentage of the notifier reward from the staking contract\n        // the notifier of a redemption timeout receives. The value is in the\n        // range [0, 100].\n        uint256 redemptionTimeoutNotifierRewardMultiplier;\n        // Collection of all pending redemption requests indexed by\n        // redemption key built as\n        // `keccak256(walletPubKeyHash | redeemerOutputScript)`.\n        // The `walletPubKeyHash` is the 20-byte wallet's public key hash\n        // (computed using Bitcoin HASH160 over the compressed ECDSA\n        // public key) and `redeemerOutputScript` is a Bitcoin script\n        // (P2PKH, P2WPKH, P2SH or P2WSH) that will be used to lock\n        // redeemed BTC as requested by the redeemer. Requests are added\n        // to this mapping by the `requestRedemption` method (duplicates\n        // not allowed) and are removed by one of the following methods:\n        // - `submitRedemptionProof` in case the request was handled\n        //    successfully\n        // - `notifyRedemptionTimeout` in case the request was reported\n        //    to be timed out\n        mapping(uint256 => Redemption.RedemptionRequest) pendingRedemptions;\n        // Collection of all timed out redemptions requests indexed by\n        // redemption key built as\n        // `keccak256(walletPubKeyHash | redeemerOutputScript)`. The\n        // `walletPubKeyHash` is the 20-byte wallet's public key hash\n        // (computed using Bitcoin HASH160 over the compressed ECDSA\n        // public key) and `redeemerOutputScript` is the Bitcoin script\n        // (P2PKH, P2WPKH, P2SH or P2WSH) that is involved in the timed\n        // out request. Timed out requests are stored in this mapping to\n        // avoid slashing the wallets multiple times for the same timeout.\n        // Only one method can add to this mapping:\n        // - `notifyRedemptionTimeout` which puts the redemption key to this\n        //    mapping basing on a timed out request stored previously in\n        //    `pendingRedemptions` mapping.\n        mapping(uint256 => Redemption.RedemptionRequest) timedOutRedemptions;\n        // The amount of ETH in wei the party challenging the wallet for fraud\n        // needs to deposit.\n        uint256 fraudChallengeDepositAmount;\n        // The amount of time the wallet has to defeat a fraud challenge.\n        uint256 fraudChallengeDefeatTimeout;\n        // The amount of stake slashed from each member of a wallet for a fraud.\n        uint96 fraudSlashingAmount;\n        // The percentage of the notifier reward from the staking contract\n        // the notifier of a fraud receives. The value is in the range [0, 100].\n        uint256 fraudNotifierRewardMultiplier;\n        // Collection of all submitted fraud challenges indexed by challenge\n        // key built as `keccak256(walletPublicKey|sighash)`.\n        mapping(uint256 => Fraud.FraudChallenge) fraudChallenges;\n        // Collection of main UTXOs that are honestly spent indexed by\n        // `keccak256(fundingTxHash | fundingOutputIndex)`. The `fundingTxHash`\n        // is `bytes32` (ordered as in Bitcoin internally) and\n        // `fundingOutputIndex` an `uint32`. A main UTXO is considered honestly\n        // spent if it was used as an input of a transaction that have been\n        // proven in the Bridge.\n        mapping(uint256 => bool) spentMainUTXOs;\n        // Determines how frequently a new wallet creation can be requested.\n        // Value in seconds.\n        uint32 walletCreationPeriod;\n        // The minimum BTC threshold in satoshi that is used to decide about\n        // wallet creation. Specifically, we allow for the creation of a new\n        // wallet if the active wallet is old enough and their amount of BTC\n        // is greater than or equal this threshold.\n        uint64 walletCreationMinBtcBalance;\n        // The maximum BTC threshold in satoshi that is used to decide about\n        // wallet creation. Specifically, we allow for the creation of a new\n        // wallet if the active wallet's amount of BTC is greater than or equal\n        // this threshold, regardless of the active wallet's age.\n        uint64 walletCreationMaxBtcBalance;\n        // The minimum BTC threshold in satoshi that is used to decide about\n        // wallet closing. Specifically, we allow for the closure of the given\n        // wallet if their amount of BTC is lesser than this threshold,\n        // regardless of the wallet's age.\n        uint64 walletClosureMinBtcBalance;\n        // The maximum age of a wallet in seconds, after which the wallet\n        // moving funds process can be requested.\n        uint32 walletMaxAge;\n        // 20-byte wallet public key hash being reference to the currently\n        // active wallet. Can be unset to the zero value under certain\n        // circumstances.\n        bytes20 activeWalletPubKeyHash;\n        // The current number of wallets in the Live state.\n        uint32 liveWalletsCount;\n        // The maximum BTC amount in satoshi than can be transferred to a single\n        // target wallet during the moving funds process.\n        uint64 walletMaxBtcTransfer;\n        // Determines the length of the wallet closing period, i.e. the period\n        // when the wallet remains in the Closing state and can be subject\n        // of deposit fraud challenges. This value is in seconds and should be\n        // greater than the deposit refund time plus some time margin.\n        uint32 walletClosingPeriod;\n        // Maps the 20-byte wallet public key hash (computed using Bitcoin\n        // HASH160 over the compressed ECDSA public key) to the basic wallet\n        // information like state and pending redemptions value.\n        mapping(bytes20 => Wallets.Wallet) registeredWallets;\n        // Reserved storage space in case we need to add more variables.\n        // The convention from OpenZeppelin suggests the storage space should\n        // add up to 50 slots. Here we want to have more slots as there are\n        // planned upgrades of the Bridge contract. If more entires are added to\n        // the struct in the upcoming versions we need to reduce the array size.\n        // See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n        // slither-disable-next-line unused-state\n        uint256[50] __gap;\n    }\n\n    event DepositParametersUpdated(\n        uint64 depositDustThreshold,\n        uint64 depositTreasuryFeeDivisor,\n        uint64 depositTxMaxFee\n    );\n\n    event RedemptionParametersUpdated(\n        uint64 redemptionDustThreshold,\n        uint64 redemptionTreasuryFeeDivisor,\n        uint64 redemptionTxMaxFee,\n        uint256 redemptionTimeout,\n        uint96 redemptionTimeoutSlashingAmount,\n        uint256 redemptionTimeoutNotifierRewardMultiplier\n    );\n\n    event MovingFundsParametersUpdated(\n        uint64 movingFundsTxMaxTotalFee,\n        uint64 movingFundsDustThreshold,\n        uint32 movingFundsTimeout,\n        uint96 movingFundsTimeoutSlashingAmount,\n        uint256 movingFundsTimeoutNotifierRewardMultiplier,\n        uint64 movedFundsSweepTxMaxTotalFee,\n        uint32 movedFundsSweepTimeout,\n        uint96 movedFundsSweepTimeoutSlashingAmount,\n        uint256 movedFundsSweepTimeoutNotifierRewardMultiplier\n    );\n\n    event WalletParametersUpdated(\n        uint32 walletCreationPeriod,\n        uint64 walletCreationMinBtcBalance,\n        uint64 walletCreationMaxBtcBalance,\n        uint64 walletClosureMinBtcBalance,\n        uint32 walletMaxAge,\n        uint64 walletMaxBtcTransfer,\n        uint32 walletClosingPeriod\n    );\n\n    event FraudParametersUpdated(\n        uint256 fraudChallengeDepositAmount,\n        uint256 fraudChallengeDefeatTimeout,\n        uint96 fraudSlashingAmount,\n        uint256 fraudNotifierRewardMultiplier\n    );\n\n    /// @notice Updates parameters of deposits.\n    /// @param _depositDustThreshold New value of the deposit dust threshold in\n    ///        satoshis. It is the minimal amount that can be requested to\n    ////       deposit. Value of this parameter must take into account the value\n    ///        of `depositTreasuryFeeDivisor` and `depositTxMaxFee` parameters\n    ///        in order to make requests that can incur the treasury and\n    ///        transaction fee and still satisfy the depositor\n    /// @param _depositTreasuryFeeDivisor New value of the treasury fee divisor.\n    ///        It is the divisor used to compute the treasury fee taken from\n    ///        each deposit and transferred to the treasury upon sweep proof\n    ///        submission. That fee is computed as follows:\n    ///        `treasuryFee = depositedAmount / depositTreasuryFeeDivisor`\n    ///        For example, if the treasury fee needs to be 2% of each deposit,\n    ///        the `depositTreasuryFeeDivisor` should be set to `50`\n    ///        because `1/50 = 0.02 = 2%`\n    /// @param _depositTxMaxFee New value of the deposit tx max fee in satoshis.\n    ///        It is the maximum amount of BTC transaction fee that can\n    ///        be incurred by each swept deposit being part of the given sweep\n    ///        transaction. If the maximum BTC transaction fee is exceeded,\n    ///        such transaction is considered a fraud\n    /// @dev Requirements:\n    ///      - Deposit dust threshold must be greater than zero\n    ///      - Deposit treasury fee divisor must be greater than zero\n    ///      - Deposit transaction max fee must be greater than zero\n    function updateDepositParameters(\n        Storage storage self,\n        uint64 _depositDustThreshold,\n        uint64 _depositTreasuryFeeDivisor,\n        uint64 _depositTxMaxFee\n    ) internal {\n        require(\n            _depositDustThreshold > 0,\n            \"Deposit dust threshold must be greater than zero\"\n        );\n\n        require(\n            _depositTreasuryFeeDivisor > 0,\n            \"Deposit treasury fee divisor must be greater than zero\"\n        );\n\n        require(\n            _depositTxMaxFee > 0,\n            \"Deposit transaction max fee must be greater than zero\"\n        );\n\n        self.depositDustThreshold = _depositDustThreshold;\n        self.depositTreasuryFeeDivisor = _depositTreasuryFeeDivisor;\n        self.depositTxMaxFee = _depositTxMaxFee;\n\n        emit DepositParametersUpdated(\n            _depositDustThreshold,\n            _depositTreasuryFeeDivisor,\n            _depositTxMaxFee\n        );\n    }\n\n    /// @notice Updates parameters of redemptions.\n    /// @param _redemptionDustThreshold New value of the redemption dust\n    ///        threshold in satoshis. It is the minimal amount that can be\n    ///        requested for redemption. Value of this parameter must take into\n    ///        account the value of `redemptionTreasuryFeeDivisor` and\n    ///        `redemptionTxMaxFee` parameters in order to make requests that\n    ///        can incur the treasury and transaction fee and still satisfy the\n    ///        redeemer.\n    /// @param _redemptionTreasuryFeeDivisor New value of the redemption\n    ///        treasury fee divisor. It is the divisor used to compute the\n    ///        treasury fee taken from each redemption request and transferred\n    ///        to the treasury upon successful request finalization. That fee is\n    ///        computed as follows:\n    ///        `treasuryFee = requestedAmount / redemptionTreasuryFeeDivisor`\n    ///        For example, if the treasury fee needs to be 2% of each\n    ///        redemption request, the `redemptionTreasuryFeeDivisor` should\n    ///        be set to `50` because `1/50 = 0.02 = 2%`.\n    /// @param _redemptionTxMaxFee New value of the redemption transaction max\n    ///        fee in satoshis. It is the maximum amount of BTC transaction fee\n    ///        that can be incurred by each redemption request being part of the\n    ///        given redemption transaction. If the maximum BTC transaction fee\n    ///        is exceeded, such transaction is considered a fraud.\n    ///        This is a per-redemption output max fee for the redemption\n    ///        transaction.\n    /// @param _redemptionTimeout New value of the redemption timeout in seconds.\n    ///        It is the time after which the redemption request can be reported\n    ///        as timed out. It is counted from the moment when the redemption\n    ///        request was created via `requestRedemption` call. Reported  timed\n    ///        out requests are cancelled and locked TBTC is returned to the\n    ///        redeemer in full amount.\n    /// @param _redemptionTimeoutSlashingAmount New value of the redemption\n    ///        timeout slashing amount in T, it is the amount slashed from each\n    ///        wallet member for redemption timeout\n    /// @param _redemptionTimeoutNotifierRewardMultiplier New value of the\n    ///        redemption timeout notifier reward multiplier as percentage,\n    ///        it determines the percentage of the notifier reward from the\n    ///        staking contact the notifier of a redemption timeout receives.\n    ///        The value must be in the range [0, 100]\n    /// @dev Requirements:\n    ///      - Redemption dust threshold must be greater than moving funds dust\n    ///        threshold\n    ///      - Redemption treasury fee divisor must be greater than zero\n    ///      - Redemption transaction max fee must be greater than zero\n    ///      - Redemption timeout must be greater than zero\n    ///      - Redemption timeout notifier reward multiplier must be in the\n    ///        range [0, 100]\n    function updateRedemptionParameters(\n        Storage storage self,\n        uint64 _redemptionDustThreshold,\n        uint64 _redemptionTreasuryFeeDivisor,\n        uint64 _redemptionTxMaxFee,\n        uint256 _redemptionTimeout,\n        uint96 _redemptionTimeoutSlashingAmount,\n        uint256 _redemptionTimeoutNotifierRewardMultiplier\n    ) internal {\n        require(\n            _redemptionDustThreshold > self.movingFundsDustThreshold,\n            \"Redemption dust threshold must be greater than moving funds dust threshold\"\n        );\n\n        require(\n            _redemptionTreasuryFeeDivisor > 0,\n            \"Redemption treasury fee divisor must be greater than zero\"\n        );\n\n        require(\n            _redemptionTxMaxFee > 0,\n            \"Redemption transaction max fee must be greater than zero\"\n        );\n\n        require(\n            _redemptionTimeout > 0,\n            \"Redemption timeout must be greater than zero\"\n        );\n\n        require(\n            _redemptionTimeoutNotifierRewardMultiplier <= 100,\n            \"Redemption timeout notifier reward multiplier must be in the range [0, 100]\"\n        );\n\n        self.redemptionDustThreshold = _redemptionDustThreshold;\n        self.redemptionTreasuryFeeDivisor = _redemptionTreasuryFeeDivisor;\n        self.redemptionTxMaxFee = _redemptionTxMaxFee;\n        self.redemptionTimeout = _redemptionTimeout;\n        self.redemptionTimeoutSlashingAmount = _redemptionTimeoutSlashingAmount;\n        self\n            .redemptionTimeoutNotifierRewardMultiplier = _redemptionTimeoutNotifierRewardMultiplier;\n\n        emit RedemptionParametersUpdated(\n            _redemptionDustThreshold,\n            _redemptionTreasuryFeeDivisor,\n            _redemptionTxMaxFee,\n            _redemptionTimeout,\n            _redemptionTimeoutSlashingAmount,\n            _redemptionTimeoutNotifierRewardMultiplier\n        );\n    }\n\n    /// @notice Updates parameters of moving funds.\n    /// @param _movingFundsTxMaxTotalFee New value of the moving funds transaction\n    ///        max total fee in satoshis. It is the maximum amount of the total\n    ///        BTC transaction fee that is acceptable in a single moving funds\n    ///        transaction. This is a _total_ max fee for the entire moving\n    ///        funds transaction.\n    /// @param _movingFundsDustThreshold New value of the moving funds dust\n    ///        threshold. It is the minimal satoshi amount that makes sense to\n    //         be transferred during the moving funds process. Moving funds\n    //         wallets having their BTC balance below that value can begin\n    //         closing immediately as transferring such a low value may not be\n    //         possible due to BTC network fees.\n    /// @param _movingFundsTimeout New value of the moving funds timeout in\n    ///        seconds. It is the time after which the moving funds process can\n    ///        be reported as timed out. It is counted from the moment when the\n    ///        wallet was requested to move their funds and switched to the\n    ///        MovingFunds state.\n    /// @param _movingFundsTimeoutSlashingAmount New value of the moving funds\n    ///        timeout slashing amount in T, it is the amount slashed from each\n    ///        wallet member for moving funds timeout\n    /// @param _movingFundsTimeoutNotifierRewardMultiplier New value of the\n    ///        moving funds timeout notifier reward multiplier as percentage,\n    ///        it determines the percentage of the notifier reward from the\n    ///        staking contact the notifier of a moving funds timeout receives.\n    ///        The value must be in the range [0, 100]\n    /// @param _movedFundsSweepTxMaxTotalFee New value of the moved funds sweep\n    ///        transaction max total fee in satoshis. It is the maximum amount\n    ///        of the total BTC transaction fee that is acceptable in a single\n    ///        moved funds sweep transaction. This is a _total_ max fee for the\n    ///        entire moved funds sweep transaction.\n    /// @param _movedFundsSweepTimeout New value of the moved funds sweep\n    ///        timeout in seconds. It is the time after which the moved funds\n    ///        sweep process can be reported as timed out. It is counted from\n    ///        the moment when the wallet was requested to sweep the received\n    ///        funds.\n    /// @param _movedFundsSweepTimeoutSlashingAmount New value of the moved\n    ///        funds sweep timeout slashing amount in T, it is the amount\n    ///        slashed from each wallet member for moved funds sweep timeout\n    /// @param _movedFundsSweepTimeoutNotifierRewardMultiplier New value of\n    ///        the moved funds sweep timeout notifier reward multiplier as\n    ///        percentage, it determines the percentage of the notifier reward\n    ///        from the staking contact the notifier of a moved funds sweep\n    ///        timeout receives. The value must be in the range [0, 100]\n    /// @dev Requirements:\n    ///      - Moving funds transaction max total fee must be greater than zero\n    ///      - Moving funds dust threshold must be greater than zero and lower\n    ///        than the redemption dust threshold\n    ///      - Moving funds timeout must be greater than zero\n    ///      - Moving funds timeout notifier reward multiplier must be in the\n    ///        range [0, 100]\n    ///      - Moved funds sweep transaction max total fee must be greater than zero\n    ///      - Moved funds sweep timeout must be greater than zero\n    ///      - Moved funds sweep timeout notifier reward multiplier must be in the\n    ///        range [0, 100]\n    function updateMovingFundsParameters(\n        Storage storage self,\n        uint64 _movingFundsTxMaxTotalFee,\n        uint64 _movingFundsDustThreshold,\n        uint32 _movingFundsTimeout,\n        uint96 _movingFundsTimeoutSlashingAmount,\n        uint256 _movingFundsTimeoutNotifierRewardMultiplier,\n        uint64 _movedFundsSweepTxMaxTotalFee,\n        uint32 _movedFundsSweepTimeout,\n        uint96 _movedFundsSweepTimeoutSlashingAmount,\n        uint256 _movedFundsSweepTimeoutNotifierRewardMultiplier\n    ) internal {\n        require(\n            _movingFundsTxMaxTotalFee > 0,\n            \"Moving funds transaction max total fee must be greater than zero\"\n        );\n\n        require(\n            _movingFundsDustThreshold > 0 &&\n                _movingFundsDustThreshold < self.redemptionDustThreshold,\n            \"Moving funds dust threshold must be greater than zero and lower than redemption dust threshold\"\n        );\n\n        require(\n            _movingFundsTimeout > 0,\n            \"Moving funds timeout must be greater than zero\"\n        );\n\n        require(\n            _movingFundsTimeoutNotifierRewardMultiplier <= 100,\n            \"Moving funds timeout notifier reward multiplier must be in the range [0, 100]\"\n        );\n\n        require(\n            _movedFundsSweepTxMaxTotalFee > 0,\n            \"Moved funds sweep transaction max total fee must be greater than zero\"\n        );\n\n        require(\n            _movedFundsSweepTimeout > 0,\n            \"Moved funds sweep timeout must be greater than zero\"\n        );\n\n        require(\n            _movedFundsSweepTimeoutNotifierRewardMultiplier <= 100,\n            \"Moved funds sweep timeout notifier reward multiplier must be in the range [0, 100]\"\n        );\n\n        self.movingFundsTxMaxTotalFee = _movingFundsTxMaxTotalFee;\n        self.movingFundsDustThreshold = _movingFundsDustThreshold;\n        self.movingFundsTimeout = _movingFundsTimeout;\n        self\n            .movingFundsTimeoutSlashingAmount = _movingFundsTimeoutSlashingAmount;\n        self\n            .movingFundsTimeoutNotifierRewardMultiplier = _movingFundsTimeoutNotifierRewardMultiplier;\n        self.movedFundsSweepTxMaxTotalFee = _movedFundsSweepTxMaxTotalFee;\n        self.movedFundsSweepTimeout = _movedFundsSweepTimeout;\n        self\n            .movedFundsSweepTimeoutSlashingAmount = _movedFundsSweepTimeoutSlashingAmount;\n        self\n            .movedFundsSweepTimeoutNotifierRewardMultiplier = _movedFundsSweepTimeoutNotifierRewardMultiplier;\n\n        emit MovingFundsParametersUpdated(\n            _movingFundsTxMaxTotalFee,\n            _movingFundsDustThreshold,\n            _movingFundsTimeout,\n            _movingFundsTimeoutSlashingAmount,\n            _movingFundsTimeoutNotifierRewardMultiplier,\n            _movedFundsSweepTxMaxTotalFee,\n            _movedFundsSweepTimeout,\n            _movedFundsSweepTimeoutSlashingAmount,\n            _movedFundsSweepTimeoutNotifierRewardMultiplier\n        );\n    }\n\n    /// @notice Updates parameters of wallets.\n    /// @param _walletCreationPeriod New value of the wallet creation period in\n    ///        seconds, determines how frequently a new wallet creation can be\n    ///        requested\n    /// @param _walletCreationMinBtcBalance New value of the wallet minimum BTC\n    ///        balance in satoshi, used to decide about wallet creation\n    /// @param _walletCreationMaxBtcBalance New value of the wallet maximum BTC\n    ///        balance in satoshi, used to decide about wallet creation\n    /// @param _walletClosureMinBtcBalance New value of the wallet minimum BTC\n    ///        balance in satoshi, used to decide about wallet closure\n    /// @param _walletMaxAge New value of the wallet maximum age in seconds,\n    ///        indicates the maximum age of a wallet in seconds, after which\n    ///        the wallet moving funds process can be requested\n    /// @param _walletMaxBtcTransfer New value of the wallet maximum BTC transfer\n    ///        in satoshi, determines the maximum amount that can be transferred\n    ///        to a single target wallet during the moving funds process\n    /// @param _walletClosingPeriod New value of the wallet closing period in\n    ///        seconds, determines the length of the wallet closing period,\n    //         i.e. the period when the wallet remains in the Closing state\n    //         and can be subject of deposit fraud challenges\n    /// @dev Requirements:\n    ///      - Wallet minimum BTC balance must be greater than zero\n    ///      - Wallet maximum BTC balance must be greater than the wallet\n    ///        minimum BTC balance\n    ///      - Wallet maximum BTC transfer must be greater than zero\n    ///      - Wallet closing period must be greater than zero\n    function updateWalletParameters(\n        Storage storage self,\n        uint32 _walletCreationPeriod,\n        uint64 _walletCreationMinBtcBalance,\n        uint64 _walletCreationMaxBtcBalance,\n        uint64 _walletClosureMinBtcBalance,\n        uint32 _walletMaxAge,\n        uint64 _walletMaxBtcTransfer,\n        uint32 _walletClosingPeriod\n    ) internal {\n        require(\n            _walletCreationMaxBtcBalance > _walletCreationMinBtcBalance,\n            \"Wallet creation maximum BTC balance must be greater than the creation minimum BTC balance\"\n        );\n        require(\n            _walletClosureMinBtcBalance > 0,\n            \"Wallet closure minimum BTC balance must be greater than zero\"\n        );\n        require(\n            _walletMaxBtcTransfer > 0,\n            \"Wallet maximum BTC transfer must be greater than zero\"\n        );\n        require(\n            _walletClosingPeriod > 0,\n            \"Wallet closing period must be greater than zero\"\n        );\n\n        self.walletCreationPeriod = _walletCreationPeriod;\n        self.walletCreationMinBtcBalance = _walletCreationMinBtcBalance;\n        self.walletCreationMaxBtcBalance = _walletCreationMaxBtcBalance;\n        self.walletClosureMinBtcBalance = _walletClosureMinBtcBalance;\n        self.walletMaxAge = _walletMaxAge;\n        self.walletMaxBtcTransfer = _walletMaxBtcTransfer;\n        self.walletClosingPeriod = _walletClosingPeriod;\n\n        emit WalletParametersUpdated(\n            _walletCreationPeriod,\n            _walletCreationMinBtcBalance,\n            _walletCreationMaxBtcBalance,\n            _walletClosureMinBtcBalance,\n            _walletMaxAge,\n            _walletMaxBtcTransfer,\n            _walletClosingPeriod\n        );\n    }\n\n    /// @notice Updates parameters related to frauds.\n    /// @param _fraudChallengeDepositAmount New value of the fraud challenge\n    ///        deposit amount in wei, it is the amount of ETH the party\n    ///        challenging the wallet for fraud needs to deposit\n    /// @param _fraudChallengeDefeatTimeout New value of the challenge defeat\n    ///        timeout in seconds, it is the amount of time the wallet has to\n    ///        defeat a fraud challenge. The value must be greater than zero\n    /// @param _fraudSlashingAmount New value of the fraud slashing amount in T,\n    ///        it is the amount slashed from each wallet member for committing\n    ///        a fraud\n    /// @param _fraudNotifierRewardMultiplier New value of the fraud notifier\n    ///        reward multiplier as percentage, it determines the percentage of\n    ///        the notifier reward from the staking contact the notifier of\n    ///        a fraud receives. The value must be in the range [0, 100]\n    /// @dev Requirements:\n    ///      - Fraud challenge defeat timeout must be greater than 0\n    ///      - Fraud notifier reward multiplier must be in the range [0, 100]\n    function updateFraudParameters(\n        Storage storage self,\n        uint256 _fraudChallengeDepositAmount,\n        uint256 _fraudChallengeDefeatTimeout,\n        uint96 _fraudSlashingAmount,\n        uint256 _fraudNotifierRewardMultiplier\n    ) internal {\n        require(\n            _fraudChallengeDefeatTimeout > 0,\n            \"Fraud challenge defeat timeout must be greater than zero\"\n        );\n\n        require(\n            _fraudNotifierRewardMultiplier <= 100,\n            \"Fraud notifier reward multiplier must be in the range [0, 100]\"\n        );\n\n        self.fraudChallengeDepositAmount = _fraudChallengeDepositAmount;\n        self.fraudChallengeDefeatTimeout = _fraudChallengeDefeatTimeout;\n        self.fraudSlashingAmount = _fraudSlashingAmount;\n        self.fraudNotifierRewardMultiplier = _fraudNotifierRewardMultiplier;\n\n        emit FraudParametersUpdated(\n            _fraudChallengeDepositAmount,\n            _fraudChallengeDefeatTimeout,\n            _fraudSlashingAmount,\n            _fraudNotifierRewardMultiplier\n        );\n    }\n}\n"
+      "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\nimport {IWalletRegistry as EcdsaWalletRegistry} from \"@keep-network/ecdsa/contracts/api/IWalletRegistry.sol\";\n\nimport \"./IRelay.sol\";\nimport \"./Deposit.sol\";\nimport \"./Redemption.sol\";\nimport \"./Fraud.sol\";\nimport \"./Wallets.sol\";\nimport \"./MovingFunds.sol\";\n\nimport \"../bank/Bank.sol\";\n\nlibrary BridgeState {\n    struct Storage {\n        // Address of the Bank the Bridge belongs to.\n        Bank bank;\n        // Bitcoin relay providing the current Bitcoin network difficulty.\n        IRelay relay;\n        // ECDSA Wallet Registry contract handle.\n        EcdsaWalletRegistry ecdsaWalletRegistry;\n        // The number of confirmations on the Bitcoin chain required to\n        // successfully evaluate an SPV proof.\n        uint256 txProofDifficultyFactor;\n        // Address where the deposit and redemption treasury fees will be sent\n        // to. Treasury takes part in the operators rewarding process.\n        address treasury;\n        // The minimal amount that can be requested to deposit.\n        // Value of this parameter must take into account the value of\n        // `depositTreasuryFeeDivisor` and `depositTxMaxFee` parameters in order\n        // to make requests that can incur the treasury and transaction fee and\n        // still satisfy the depositor.\n        uint64 depositDustThreshold;\n        // Divisor used to compute the treasury fee taken from each deposit and\n        // transferred to the treasury upon sweep proof submission. That fee is\n        // computed as follows:\n        // `treasuryFee = depositedAmount / depositTreasuryFeeDivisor`\n        // For example, if the treasury fee needs to be 2% of each deposit,\n        // the `depositTreasuryFeeDivisor` should be set to `50` because\n        // `1/50 = 0.02 = 2%`.\n        uint64 depositTreasuryFeeDivisor;\n        // Maximum amount of BTC transaction fee that can be incurred by each\n        // swept deposit being part of the given sweep transaction. If the\n        // maximum BTC transaction fee is exceeded, such transaction is\n        // considered a fraud.\n        //\n        // This is a per-deposit input max fee for the sweep transaction.\n        uint64 depositTxMaxFee;\n        // Collection of all revealed deposits indexed by\n        // `keccak256(fundingTxHash | fundingOutputIndex)`.\n        // The `fundingTxHash` is `bytes32` (ordered as in Bitcoin internally)\n        // and `fundingOutputIndex` an `uint32`. This mapping may contain valid\n        // and invalid deposits and the wallet is responsible for validating\n        // them before attempting to execute a sweep.\n        mapping(uint256 => Deposit.DepositRequest) deposits;\n        // Indicates if the vault with the given address is trusted or not.\n        // Depositors can route their revealed deposits only to trusted vaults\n        // and have trusted vaults notified about new deposits as soon as these\n        // deposits get swept. Vaults not trusted by the Bridge can still be\n        // used by Bank balance owners on their own responsibility - anyone can\n        // approve their Bank balance to any address.\n        mapping(address => bool) isVaultTrusted;\n        // Maximum amount of the total BTC transaction fee that is acceptable in\n        // a single moving funds transaction.\n        //\n        // This is a TOTAL max fee for the moving funds transaction. Note\n        // that `depositTxMaxFee` is per single deposit and `redemptionTxMaxFee`\n        // if per single redemption. `movingFundsTxMaxTotalFee` is a total\n        // fee for the entire transaction.\n        uint64 movingFundsTxMaxTotalFee;\n        // The minimal satoshi amount that makes sense to be transferred during\n        // the moving funds process. Moving funds wallets having their BTC\n        // balance below that value can begin closing immediately as\n        // transferring such a low value may not be possible due to\n        // BTC network fees. The value of this parameter must always be lower\n        // than `redemptionDustThreshold` in order to prevent redemption requests\n        // with values lower or equal to `movingFundsDustThreshold`.\n        uint64 movingFundsDustThreshold;\n        // Time after which the moving funds process can be reported as\n        // timed out. It is counted from the moment when the wallet\n        // was requested to move their funds and switched to the MovingFunds\n        // state. Value in seconds.\n        uint32 movingFundsTimeout;\n        // The amount of stake slashed from each member of a wallet for a moving\n        // funds timeout.\n        uint96 movingFundsTimeoutSlashingAmount;\n        // The percentage of the notifier reward from the staking contract\n        // the notifier of a moving funds timeout receives. The value is in the\n        // range [0, 100].\n        uint256 movingFundsTimeoutNotifierRewardMultiplier;\n        // Maximum amount of the total BTC transaction fee that is acceptable in\n        // a single moved funds sweep transaction.\n        //\n        // This is a TOTAL max fee for the moved funds sweep transaction. Note\n        // that `depositTxMaxFee` is per single deposit and `redemptionTxMaxFee`\n        // if per single redemption. `movedFundsSweepTxMaxTotalFee` is a total\n        // fee for the entire transaction.\n        uint64 movedFundsSweepTxMaxTotalFee;\n        // Time after which the moved funds sweep process can be reported as\n        // timed out. It is counted from the moment when the recipient wallet\n        // was requested to sweep the received funds. Value in seconds.\n        uint32 movedFundsSweepTimeout;\n        // The amount of stake slashed from each member of a wallet for a moved\n        // funds sweep timeout.\n        uint96 movedFundsSweepTimeoutSlashingAmount;\n        // The percentage of the notifier reward from the staking contract\n        // the notifier of a moved funds sweep timeout receives. The value is\n        // in the range [0, 100].\n        uint256 movedFundsSweepTimeoutNotifierRewardMultiplier;\n        // Collection of all moved funds sweep requests indexed by\n        // `keccak256(movingFundsTxHash | movingFundsOutputIndex)`.\n        // The `movingFundsTxHash` is `bytes32` (ordered as in Bitcoin\n        // internally) and `movingFundsOutputIndex` an `uint32`. Each entry\n        // is actually an UTXO representing the moved funds and is supposed\n        // to be swept with the current main UTXO of the recipient wallet.\n        mapping(uint256 => MovingFunds.MovedFundsSweepRequest) movedFundsSweepRequests;\n        // The minimal amount that can be requested for redemption.\n        // Value of this parameter must take into account the value of\n        // `redemptionTreasuryFeeDivisor` and `redemptionTxMaxFee`\n        // parameters in order to make requests that can incur the\n        // treasury and transaction fee and still satisfy the redeemer.\n        // Additionally, the value of this parameter must always be greater\n        // than `movingFundsDustThreshold` in order to prevent redemption\n        // requests with values lower or equal to `movingFundsDustThreshold`.\n        uint64 redemptionDustThreshold;\n        // Divisor used to compute the treasury fee taken from each\n        // redemption request and transferred to the treasury upon\n        // successful request finalization. That fee is computed as follows:\n        // `treasuryFee = requestedAmount / redemptionTreasuryFeeDivisor`\n        // For example, if the treasury fee needs to be 2% of each\n        // redemption request, the `redemptionTreasuryFeeDivisor` should\n        // be set to `50` because `1/50 = 0.02 = 2%`.\n        uint64 redemptionTreasuryFeeDivisor;\n        // Maximum amount of BTC transaction fee that can be incurred by\n        // each redemption request being part of the given redemption\n        // transaction. If the maximum BTC transaction fee is exceeded, such\n        // transaction is considered a fraud.\n        //\n        // This is a per-redemption output max fee for the redemption\n        // transaction.\n        uint64 redemptionTxMaxFee;\n        // Time after which the redemption request can be reported as\n        // timed out. It is counted from the moment when the redemption\n        // request was created via `requestRedemption` call. Reported\n        // timed out requests are cancelled and locked TBTC is returned\n        // to the redeemer in full amount.\n        uint256 redemptionTimeout;\n        // The amount of stake slashed from each member of a wallet for a\n        // redemption timeout.\n        uint96 redemptionTimeoutSlashingAmount;\n        // The percentage of the notifier reward from the staking contract\n        // the notifier of a redemption timeout receives. The value is in the\n        // range [0, 100].\n        uint256 redemptionTimeoutNotifierRewardMultiplier;\n        // Collection of all pending redemption requests indexed by\n        // redemption key built as\n        // `keccak256(walletPubKeyHash | redeemerOutputScript)`.\n        // The `walletPubKeyHash` is the 20-byte wallet's public key hash\n        // (computed using Bitcoin HASH160 over the compressed ECDSA\n        // public key) and `redeemerOutputScript` is a Bitcoin script\n        // (P2PKH, P2WPKH, P2SH or P2WSH) that will be used to lock\n        // redeemed BTC as requested by the redeemer. Requests are added\n        // to this mapping by the `requestRedemption` method (duplicates\n        // not allowed) and are removed by one of the following methods:\n        // - `submitRedemptionProof` in case the request was handled\n        //    successfully\n        // - `notifyRedemptionTimeout` in case the request was reported\n        //    to be timed out\n        mapping(uint256 => Redemption.RedemptionRequest) pendingRedemptions;\n        // Collection of all timed out redemptions requests indexed by\n        // redemption key built as\n        // `keccak256(walletPubKeyHash | redeemerOutputScript)`. The\n        // `walletPubKeyHash` is the 20-byte wallet's public key hash\n        // (computed using Bitcoin HASH160 over the compressed ECDSA\n        // public key) and `redeemerOutputScript` is the Bitcoin script\n        // (P2PKH, P2WPKH, P2SH or P2WSH) that is involved in the timed\n        // out request. Timed out requests are stored in this mapping to\n        // avoid slashing the wallets multiple times for the same timeout.\n        // Only one method can add to this mapping:\n        // - `notifyRedemptionTimeout` which puts the redemption key to this\n        //    mapping basing on a timed out request stored previously in\n        //    `pendingRedemptions` mapping.\n        mapping(uint256 => Redemption.RedemptionRequest) timedOutRedemptions;\n        // The amount of ETH in wei the party challenging the wallet for fraud\n        // needs to deposit.\n        uint256 fraudChallengeDepositAmount;\n        // The amount of time the wallet has to defeat a fraud challenge.\n        uint256 fraudChallengeDefeatTimeout;\n        // The amount of stake slashed from each member of a wallet for a fraud.\n        uint96 fraudSlashingAmount;\n        // The percentage of the notifier reward from the staking contract\n        // the notifier of a fraud receives. The value is in the range [0, 100].\n        uint256 fraudNotifierRewardMultiplier;\n        // Collection of all submitted fraud challenges indexed by challenge\n        // key built as `keccak256(walletPublicKey|sighash)`.\n        mapping(uint256 => Fraud.FraudChallenge) fraudChallenges;\n        // Collection of main UTXOs that are honestly spent indexed by\n        // `keccak256(fundingTxHash | fundingOutputIndex)`. The `fundingTxHash`\n        // is `bytes32` (ordered as in Bitcoin internally) and\n        // `fundingOutputIndex` an `uint32`. A main UTXO is considered honestly\n        // spent if it was used as an input of a transaction that have been\n        // proven in the Bridge.\n        mapping(uint256 => bool) spentMainUTXOs;\n        // Determines how frequently a new wallet creation can be requested.\n        // Value in seconds.\n        uint32 walletCreationPeriod;\n        // The minimum BTC threshold in satoshi that is used to decide about\n        // wallet creation. Specifically, we allow for the creation of a new\n        // wallet if the active wallet is old enough and their amount of BTC\n        // is greater than or equal this threshold.\n        uint64 walletCreationMinBtcBalance;\n        // The maximum BTC threshold in satoshi that is used to decide about\n        // wallet creation. Specifically, we allow for the creation of a new\n        // wallet if the active wallet's amount of BTC is greater than or equal\n        // this threshold, regardless of the active wallet's age.\n        uint64 walletCreationMaxBtcBalance;\n        // The minimum BTC threshold in satoshi that is used to decide about\n        // wallet closing. Specifically, we allow for the closure of the given\n        // wallet if their amount of BTC is lesser than this threshold,\n        // regardless of the wallet's age.\n        uint64 walletClosureMinBtcBalance;\n        // The maximum age of a wallet in seconds, after which the wallet\n        // moving funds process can be requested.\n        uint32 walletMaxAge;\n        // 20-byte wallet public key hash being reference to the currently\n        // active wallet. Can be unset to the zero value under certain\n        // circumstances.\n        bytes20 activeWalletPubKeyHash;\n        // The current number of wallets in the Live state.\n        uint32 liveWalletsCount;\n        // The maximum BTC amount in satoshi than can be transferred to a single\n        // target wallet during the moving funds process.\n        uint64 walletMaxBtcTransfer;\n        // Determines the length of the wallet closing period, i.e. the period\n        // when the wallet remains in the Closing state and can be subject\n        // of deposit fraud challenges. This value is in seconds and should be\n        // greater than the deposit refund time plus some time margin.\n        uint32 walletClosingPeriod;\n        // Maps the 20-byte wallet public key hash (computed using Bitcoin\n        // HASH160 over the compressed ECDSA public key) to the basic wallet\n        // information like state and pending redemptions value.\n        mapping(bytes20 => Wallets.Wallet) registeredWallets;\n        // Reserved storage space in case we need to add more variables.\n        // The convention from OpenZeppelin suggests the storage space should\n        // add up to 50 slots. Here we want to have more slots as there are\n        // planned upgrades of the Bridge contract. If more entires are added to\n        // the struct in the upcoming versions we need to reduce the array size.\n        // See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\n        // slither-disable-next-line unused-state\n        uint256[50] __gap;\n    }\n\n    event DepositParametersUpdated(\n        uint64 depositDustThreshold,\n        uint64 depositTreasuryFeeDivisor,\n        uint64 depositTxMaxFee\n    );\n\n    event RedemptionParametersUpdated(\n        uint64 redemptionDustThreshold,\n        uint64 redemptionTreasuryFeeDivisor,\n        uint64 redemptionTxMaxFee,\n        uint256 redemptionTimeout,\n        uint96 redemptionTimeoutSlashingAmount,\n        uint256 redemptionTimeoutNotifierRewardMultiplier\n    );\n\n    event MovingFundsParametersUpdated(\n        uint64 movingFundsTxMaxTotalFee,\n        uint64 movingFundsDustThreshold,\n        uint32 movingFundsTimeout,\n        uint96 movingFundsTimeoutSlashingAmount,\n        uint256 movingFundsTimeoutNotifierRewardMultiplier,\n        uint64 movedFundsSweepTxMaxTotalFee,\n        uint32 movedFundsSweepTimeout,\n        uint96 movedFundsSweepTimeoutSlashingAmount,\n        uint256 movedFundsSweepTimeoutNotifierRewardMultiplier\n    );\n\n    event WalletParametersUpdated(\n        uint32 walletCreationPeriod,\n        uint64 walletCreationMinBtcBalance,\n        uint64 walletCreationMaxBtcBalance,\n        uint64 walletClosureMinBtcBalance,\n        uint32 walletMaxAge,\n        uint64 walletMaxBtcTransfer,\n        uint32 walletClosingPeriod\n    );\n\n    event FraudParametersUpdated(\n        uint256 fraudChallengeDepositAmount,\n        uint256 fraudChallengeDefeatTimeout,\n        uint96 fraudSlashingAmount,\n        uint256 fraudNotifierRewardMultiplier\n    );\n\n    /// @notice Updates parameters of deposits.\n    /// @param _depositDustThreshold New value of the deposit dust threshold in\n    ///        satoshis. It is the minimal amount that can be requested to\n    ////       deposit. Value of this parameter must take into account the value\n    ///        of `depositTreasuryFeeDivisor` and `depositTxMaxFee` parameters\n    ///        in order to make requests that can incur the treasury and\n    ///        transaction fee and still satisfy the depositor\n    /// @param _depositTreasuryFeeDivisor New value of the treasury fee divisor.\n    ///        It is the divisor used to compute the treasury fee taken from\n    ///        each deposit and transferred to the treasury upon sweep proof\n    ///        submission. That fee is computed as follows:\n    ///        `treasuryFee = depositedAmount / depositTreasuryFeeDivisor`\n    ///        For example, if the treasury fee needs to be 2% of each deposit,\n    ///        the `depositTreasuryFeeDivisor` should be set to `50`\n    ///        because `1/50 = 0.02 = 2%`\n    /// @param _depositTxMaxFee New value of the deposit tx max fee in satoshis.\n    ///        It is the maximum amount of BTC transaction fee that can\n    ///        be incurred by each swept deposit being part of the given sweep\n    ///        transaction. If the maximum BTC transaction fee is exceeded,\n    ///        such transaction is considered a fraud\n    /// @dev Requirements:\n    ///      - Deposit dust threshold must be greater than zero\n    ///      - Deposit treasury fee divisor must be greater than zero\n    ///      - Deposit transaction max fee must be greater than zero\n    function updateDepositParameters(\n        Storage storage self,\n        uint64 _depositDustThreshold,\n        uint64 _depositTreasuryFeeDivisor,\n        uint64 _depositTxMaxFee\n    ) internal {\n        require(\n            _depositDustThreshold > 0,\n            \"Deposit dust threshold must be greater than zero\"\n        );\n\n        require(\n            _depositTreasuryFeeDivisor > 0,\n            \"Deposit treasury fee divisor must be greater than zero\"\n        );\n\n        require(\n            _depositTxMaxFee > 0,\n            \"Deposit transaction max fee must be greater than zero\"\n        );\n\n        self.depositDustThreshold = _depositDustThreshold;\n        self.depositTreasuryFeeDivisor = _depositTreasuryFeeDivisor;\n        self.depositTxMaxFee = _depositTxMaxFee;\n\n        emit DepositParametersUpdated(\n            _depositDustThreshold,\n            _depositTreasuryFeeDivisor,\n            _depositTxMaxFee\n        );\n    }\n\n    /// @notice Updates parameters of redemptions.\n    /// @param _redemptionDustThreshold New value of the redemption dust\n    ///        threshold in satoshis. It is the minimal amount that can be\n    ///        requested for redemption. Value of this parameter must take into\n    ///        account the value of `redemptionTreasuryFeeDivisor` and\n    ///        `redemptionTxMaxFee` parameters in order to make requests that\n    ///        can incur the treasury and transaction fee and still satisfy the\n    ///        redeemer.\n    /// @param _redemptionTreasuryFeeDivisor New value of the redemption\n    ///        treasury fee divisor. It is the divisor used to compute the\n    ///        treasury fee taken from each redemption request and transferred\n    ///        to the treasury upon successful request finalization. That fee is\n    ///        computed as follows:\n    ///        `treasuryFee = requestedAmount / redemptionTreasuryFeeDivisor`\n    ///        For example, if the treasury fee needs to be 2% of each\n    ///        redemption request, the `redemptionTreasuryFeeDivisor` should\n    ///        be set to `50` because `1/50 = 0.02 = 2%`.\n    /// @param _redemptionTxMaxFee New value of the redemption transaction max\n    ///        fee in satoshis. It is the maximum amount of BTC transaction fee\n    ///        that can be incurred by each redemption request being part of the\n    ///        given redemption transaction. If the maximum BTC transaction fee\n    ///        is exceeded, such transaction is considered a fraud.\n    ///        This is a per-redemption output max fee for the redemption\n    ///        transaction.\n    /// @param _redemptionTimeout New value of the redemption timeout in seconds.\n    ///        It is the time after which the redemption request can be reported\n    ///        as timed out. It is counted from the moment when the redemption\n    ///        request was created via `requestRedemption` call. Reported  timed\n    ///        out requests are cancelled and locked TBTC is returned to the\n    ///        redeemer in full amount.\n    /// @param _redemptionTimeoutSlashingAmount New value of the redemption\n    ///        timeout slashing amount in T, it is the amount slashed from each\n    ///        wallet member for redemption timeout\n    /// @param _redemptionTimeoutNotifierRewardMultiplier New value of the\n    ///        redemption timeout notifier reward multiplier as percentage,\n    ///        it determines the percentage of the notifier reward from the\n    ///        staking contact the notifier of a redemption timeout receives.\n    ///        The value must be in the range [0, 100]\n    /// @dev Requirements:\n    ///      - Redemption dust threshold must be greater than moving funds dust\n    ///        threshold\n    ///      - Redemption treasury fee divisor must be greater than zero\n    ///      - Redemption transaction max fee must be greater than zero\n    ///      - Redemption timeout must be greater than zero\n    ///      - Redemption timeout notifier reward multiplier must be in the\n    ///        range [0, 100]\n    function updateRedemptionParameters(\n        Storage storage self,\n        uint64 _redemptionDustThreshold,\n        uint64 _redemptionTreasuryFeeDivisor,\n        uint64 _redemptionTxMaxFee,\n        uint256 _redemptionTimeout,\n        uint96 _redemptionTimeoutSlashingAmount,\n        uint256 _redemptionTimeoutNotifierRewardMultiplier\n    ) internal {\n        require(\n            _redemptionDustThreshold > self.movingFundsDustThreshold,\n            \"Redemption dust threshold must be greater than moving funds dust threshold\"\n        );\n\n        require(\n            _redemptionTreasuryFeeDivisor > 0,\n            \"Redemption treasury fee divisor must be greater than zero\"\n        );\n\n        require(\n            _redemptionTxMaxFee > 0,\n            \"Redemption transaction max fee must be greater than zero\"\n        );\n\n        require(\n            _redemptionTimeout > 0,\n            \"Redemption timeout must be greater than zero\"\n        );\n\n        require(\n            _redemptionTimeoutNotifierRewardMultiplier <= 100,\n            \"Redemption timeout notifier reward multiplier must be in the range [0, 100]\"\n        );\n\n        self.redemptionDustThreshold = _redemptionDustThreshold;\n        self.redemptionTreasuryFeeDivisor = _redemptionTreasuryFeeDivisor;\n        self.redemptionTxMaxFee = _redemptionTxMaxFee;\n        self.redemptionTimeout = _redemptionTimeout;\n        self.redemptionTimeoutSlashingAmount = _redemptionTimeoutSlashingAmount;\n        self\n            .redemptionTimeoutNotifierRewardMultiplier = _redemptionTimeoutNotifierRewardMultiplier;\n\n        emit RedemptionParametersUpdated(\n            _redemptionDustThreshold,\n            _redemptionTreasuryFeeDivisor,\n            _redemptionTxMaxFee,\n            _redemptionTimeout,\n            _redemptionTimeoutSlashingAmount,\n            _redemptionTimeoutNotifierRewardMultiplier\n        );\n    }\n\n    /// @notice Updates parameters of moving funds.\n    /// @param _movingFundsTxMaxTotalFee New value of the moving funds transaction\n    ///        max total fee in satoshis. It is the maximum amount of the total\n    ///        BTC transaction fee that is acceptable in a single moving funds\n    ///        transaction. This is a _total_ max fee for the entire moving\n    ///        funds transaction.\n    /// @param _movingFundsDustThreshold New value of the moving funds dust\n    ///        threshold. It is the minimal satoshi amount that makes sense to\n    //         be transferred during the moving funds process. Moving funds\n    //         wallets having their BTC balance below that value can begin\n    //         closing immediately as transferring such a low value may not be\n    //         possible due to BTC network fees.\n    /// @param _movingFundsTimeout New value of the moving funds timeout in\n    ///        seconds. It is the time after which the moving funds process can\n    ///        be reported as timed out. It is counted from the moment when the\n    ///        wallet was requested to move their funds and switched to the\n    ///        MovingFunds state.\n    /// @param _movingFundsTimeoutSlashingAmount New value of the moving funds\n    ///        timeout slashing amount in T, it is the amount slashed from each\n    ///        wallet member for moving funds timeout\n    /// @param _movingFundsTimeoutNotifierRewardMultiplier New value of the\n    ///        moving funds timeout notifier reward multiplier as percentage,\n    ///        it determines the percentage of the notifier reward from the\n    ///        staking contact the notifier of a moving funds timeout receives.\n    ///        The value must be in the range [0, 100]\n    /// @param _movedFundsSweepTxMaxTotalFee New value of the moved funds sweep\n    ///        transaction max total fee in satoshis. It is the maximum amount\n    ///        of the total BTC transaction fee that is acceptable in a single\n    ///        moved funds sweep transaction. This is a _total_ max fee for the\n    ///        entire moved funds sweep transaction.\n    /// @param _movedFundsSweepTimeout New value of the moved funds sweep\n    ///        timeout in seconds. It is the time after which the moved funds\n    ///        sweep process can be reported as timed out. It is counted from\n    ///        the moment when the wallet was requested to sweep the received\n    ///        funds.\n    /// @param _movedFundsSweepTimeoutSlashingAmount New value of the moved\n    ///        funds sweep timeout slashing amount in T, it is the amount\n    ///        slashed from each wallet member for moved funds sweep timeout\n    /// @param _movedFundsSweepTimeoutNotifierRewardMultiplier New value of\n    ///        the moved funds sweep timeout notifier reward multiplier as\n    ///        percentage, it determines the percentage of the notifier reward\n    ///        from the staking contact the notifier of a moved funds sweep\n    ///        timeout receives. The value must be in the range [0, 100]\n    /// @dev Requirements:\n    ///      - Moving funds transaction max total fee must be greater than zero\n    ///      - Moving funds dust threshold must be greater than zero and lower\n    ///        than the redemption dust threshold\n    ///      - Moving funds timeout must be greater than zero\n    ///      - Moving funds timeout notifier reward multiplier must be in the\n    ///        range [0, 100]\n    ///      - Moved funds sweep transaction max total fee must be greater than zero\n    ///      - Moved funds sweep timeout must be greater than zero\n    ///      - Moved funds sweep timeout notifier reward multiplier must be in the\n    ///        range [0, 100]\n    function updateMovingFundsParameters(\n        Storage storage self,\n        uint64 _movingFundsTxMaxTotalFee,\n        uint64 _movingFundsDustThreshold,\n        uint32 _movingFundsTimeout,\n        uint96 _movingFundsTimeoutSlashingAmount,\n        uint256 _movingFundsTimeoutNotifierRewardMultiplier,\n        uint64 _movedFundsSweepTxMaxTotalFee,\n        uint32 _movedFundsSweepTimeout,\n        uint96 _movedFundsSweepTimeoutSlashingAmount,\n        uint256 _movedFundsSweepTimeoutNotifierRewardMultiplier\n    ) internal {\n        require(\n            _movingFundsTxMaxTotalFee > 0,\n            \"Moving funds transaction max total fee must be greater than zero\"\n        );\n\n        require(\n            _movingFundsDustThreshold > 0 &&\n                _movingFundsDustThreshold < self.redemptionDustThreshold,\n            \"Moving funds dust threshold must be greater than zero and lower than redemption dust threshold\"\n        );\n\n        require(\n            _movingFundsTimeout > 0,\n            \"Moving funds timeout must be greater than zero\"\n        );\n\n        require(\n            _movingFundsTimeoutNotifierRewardMultiplier <= 100,\n            \"Moving funds timeout notifier reward multiplier must be in the range [0, 100]\"\n        );\n\n        require(\n            _movedFundsSweepTxMaxTotalFee > 0,\n            \"Moved funds sweep transaction max total fee must be greater than zero\"\n        );\n\n        require(\n            _movedFundsSweepTimeout > 0,\n            \"Moved funds sweep timeout must be greater than zero\"\n        );\n\n        require(\n            _movedFundsSweepTimeoutNotifierRewardMultiplier <= 100,\n            \"Moved funds sweep timeout notifier reward multiplier must be in the range [0, 100]\"\n        );\n\n        self.movingFundsTxMaxTotalFee = _movingFundsTxMaxTotalFee;\n        self.movingFundsDustThreshold = _movingFundsDustThreshold;\n        self.movingFundsTimeout = _movingFundsTimeout;\n        self\n            .movingFundsTimeoutSlashingAmount = _movingFundsTimeoutSlashingAmount;\n        self\n            .movingFundsTimeoutNotifierRewardMultiplier = _movingFundsTimeoutNotifierRewardMultiplier;\n        self.movedFundsSweepTxMaxTotalFee = _movedFundsSweepTxMaxTotalFee;\n        self.movedFundsSweepTimeout = _movedFundsSweepTimeout;\n        self\n            .movedFundsSweepTimeoutSlashingAmount = _movedFundsSweepTimeoutSlashingAmount;\n        self\n            .movedFundsSweepTimeoutNotifierRewardMultiplier = _movedFundsSweepTimeoutNotifierRewardMultiplier;\n\n        emit MovingFundsParametersUpdated(\n            _movingFundsTxMaxTotalFee,\n            _movingFundsDustThreshold,\n            _movingFundsTimeout,\n            _movingFundsTimeoutSlashingAmount,\n            _movingFundsTimeoutNotifierRewardMultiplier,\n            _movedFundsSweepTxMaxTotalFee,\n            _movedFundsSweepTimeout,\n            _movedFundsSweepTimeoutSlashingAmount,\n            _movedFundsSweepTimeoutNotifierRewardMultiplier\n        );\n    }\n\n    /// @notice Updates parameters of wallets.\n    /// @param _walletCreationPeriod New value of the wallet creation period in\n    ///        seconds, determines how frequently a new wallet creation can be\n    ///        requested\n    /// @param _walletCreationMinBtcBalance New value of the wallet minimum BTC\n    ///        balance in satoshi, used to decide about wallet creation\n    /// @param _walletCreationMaxBtcBalance New value of the wallet maximum BTC\n    ///        balance in satoshi, used to decide about wallet creation\n    /// @param _walletClosureMinBtcBalance New value of the wallet minimum BTC\n    ///        balance in satoshi, used to decide about wallet closure\n    /// @param _walletMaxAge New value of the wallet maximum age in seconds,\n    ///        indicates the maximum age of a wallet in seconds, after which\n    ///        the wallet moving funds process can be requested\n    /// @param _walletMaxBtcTransfer New value of the wallet maximum BTC transfer\n    ///        in satoshi, determines the maximum amount that can be transferred\n    ///        to a single target wallet during the moving funds process\n    /// @param _walletClosingPeriod New value of the wallet closing period in\n    ///        seconds, determines the length of the wallet closing period,\n    //         i.e. the period when the wallet remains in the Closing state\n    //         and can be subject of deposit fraud challenges\n    /// @dev Requirements:\n    ///      - Wallet minimum BTC balance must be greater than zero\n    ///      - Wallet maximum BTC balance must be greater than the wallet\n    ///        minimum BTC balance\n    ///      - Wallet maximum BTC transfer must be greater than zero\n    ///      - Wallet closing period must be greater than zero\n    function updateWalletParameters(\n        Storage storage self,\n        uint32 _walletCreationPeriod,\n        uint64 _walletCreationMinBtcBalance,\n        uint64 _walletCreationMaxBtcBalance,\n        uint64 _walletClosureMinBtcBalance,\n        uint32 _walletMaxAge,\n        uint64 _walletMaxBtcTransfer,\n        uint32 _walletClosingPeriod\n    ) internal {\n        require(\n            _walletCreationMaxBtcBalance > _walletCreationMinBtcBalance,\n            \"Wallet creation maximum BTC balance must be greater than the creation minimum BTC balance\"\n        );\n        require(\n            _walletClosureMinBtcBalance > 0,\n            \"Wallet closure minimum BTC balance must be greater than zero\"\n        );\n        require(\n            _walletMaxBtcTransfer > 0,\n            \"Wallet maximum BTC transfer must be greater than zero\"\n        );\n        require(\n            _walletClosingPeriod > 0,\n            \"Wallet closing period must be greater than zero\"\n        );\n\n        self.walletCreationPeriod = _walletCreationPeriod;\n        self.walletCreationMinBtcBalance = _walletCreationMinBtcBalance;\n        self.walletCreationMaxBtcBalance = _walletCreationMaxBtcBalance;\n        self.walletClosureMinBtcBalance = _walletClosureMinBtcBalance;\n        self.walletMaxAge = _walletMaxAge;\n        self.walletMaxBtcTransfer = _walletMaxBtcTransfer;\n        self.walletClosingPeriod = _walletClosingPeriod;\n\n        emit WalletParametersUpdated(\n            _walletCreationPeriod,\n            _walletCreationMinBtcBalance,\n            _walletCreationMaxBtcBalance,\n            _walletClosureMinBtcBalance,\n            _walletMaxAge,\n            _walletMaxBtcTransfer,\n            _walletClosingPeriod\n        );\n    }\n\n    /// @notice Updates parameters related to frauds.\n    /// @param _fraudChallengeDepositAmount New value of the fraud challenge\n    ///        deposit amount in wei, it is the amount of ETH the party\n    ///        challenging the wallet for fraud needs to deposit\n    /// @param _fraudChallengeDefeatTimeout New value of the challenge defeat\n    ///        timeout in seconds, it is the amount of time the wallet has to\n    ///        defeat a fraud challenge. The value must be greater than zero\n    /// @param _fraudSlashingAmount New value of the fraud slashing amount in T,\n    ///        it is the amount slashed from each wallet member for committing\n    ///        a fraud\n    /// @param _fraudNotifierRewardMultiplier New value of the fraud notifier\n    ///        reward multiplier as percentage, it determines the percentage of\n    ///        the notifier reward from the staking contact the notifier of\n    ///        a fraud receives. The value must be in the range [0, 100]\n    /// @dev Requirements:\n    ///      - Fraud challenge defeat timeout must be greater than 0\n    ///      - Fraud notifier reward multiplier must be in the range [0, 100]\n    function updateFraudParameters(\n        Storage storage self,\n        uint256 _fraudChallengeDepositAmount,\n        uint256 _fraudChallengeDefeatTimeout,\n        uint96 _fraudSlashingAmount,\n        uint256 _fraudNotifierRewardMultiplier\n    ) internal {\n        require(\n            _fraudChallengeDefeatTimeout > 0,\n            \"Fraud challenge defeat timeout must be greater than zero\"\n        );\n\n        require(\n            _fraudNotifierRewardMultiplier <= 100,\n            \"Fraud notifier reward multiplier must be in the range [0, 100]\"\n        );\n\n        self.fraudChallengeDepositAmount = _fraudChallengeDepositAmount;\n        self.fraudChallengeDefeatTimeout = _fraudChallengeDefeatTimeout;\n        self.fraudSlashingAmount = _fraudSlashingAmount;\n        self.fraudNotifierRewardMultiplier = _fraudNotifierRewardMultiplier;\n\n        emit FraudParametersUpdated(\n            _fraudChallengeDepositAmount,\n            _fraudChallengeDefeatTimeout,\n            _fraudSlashingAmount,\n            _fraudNotifierRewardMultiplier\n        );\n    }\n}\n"
     },
     "@keep-network/bitcoin-spv-sol/contracts/BytesLib.sol": {
       "content": "pragma solidity ^0.8.4;\n\n/*\n\nhttps://github.com/GNSPS/solidity-bytes-utils/\n\nThis is free and unencumbered software released into the public domain.\n\nAnyone is free to copy, modify, publish, use, compile, sell, or\ndistribute this software, either in source code form or as a compiled\nbinary, for any purpose, commercial or non-commercial, and by any\nmeans.\n\nIn jurisdictions that recognize copyright laws, the author or authors\nof this software dedicate any and all copyright interest in the\nsoftware to the public domain. We make this dedication for the benefit\nof the public at large and to the detriment of our heirs and\nsuccessors. We intend this dedication to be an overt act of\nrelinquishment in perpetuity of all present and future rights to this\nsoftware under copyright law.\n\nTHE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND,\nEXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF\nMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.\nIN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR\nOTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,\nARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR\nOTHER DEALINGS IN THE SOFTWARE.\n\nFor more information, please refer to <https://unlicense.org>\n*/\n\n\n/** @title BytesLib **/\n/** @author https://github.com/GNSPS **/\n\nlibrary BytesLib {\n    function concat(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bytes memory) {\n        bytes memory tempBytes;\n\n        assembly {\n            // Get a location of some free memory and store it in tempBytes as\n            // Solidity does for memory variables.\n            tempBytes := mload(0x40)\n\n            // Store the length of the first bytes array at the beginning of\n            // the memory for tempBytes.\n            let length := mload(_preBytes)\n            mstore(tempBytes, length)\n\n            // Maintain a memory counter for the current write location in the\n            // temp bytes array by adding the 32 bytes for the array length to\n            // the starting location.\n            let mc := add(tempBytes, 0x20)\n            // Stop copying when the memory counter reaches the length of the\n            // first bytes array.\n            let end := add(mc, length)\n\n            for {\n                // Initialize a copy counter to the start of the _preBytes data,\n                // 32 bytes into its memory.\n                let cc := add(_preBytes, 0x20)\n            } lt(mc, end) {\n                // Increase both counters by 32 bytes each iteration.\n                mc := add(mc, 0x20)\n                cc := add(cc, 0x20)\n            } {\n                // Write the _preBytes data into the tempBytes memory 32 bytes\n                // at a time.\n                mstore(mc, mload(cc))\n            }\n\n            // Add the length of _postBytes to the current length of tempBytes\n            // and store it as the new length in the first 32 bytes of the\n            // tempBytes memory.\n            length := mload(_postBytes)\n            mstore(tempBytes, add(length, mload(tempBytes)))\n\n            // Move the memory counter back from a multiple of 0x20 to the\n            // actual end of the _preBytes data.\n            mc := end\n            // Stop copying when the memory counter reaches the new combined\n            // length of the arrays.\n            end := add(mc, length)\n\n            for {\n                let cc := add(_postBytes, 0x20)\n            } lt(mc, end) {\n                mc := add(mc, 0x20)\n                cc := add(cc, 0x20)\n            } {\n                mstore(mc, mload(cc))\n            }\n\n            // Update the free-memory pointer by padding our last write location\n            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the\n            // next 32 byte block, then round down to the nearest multiple of\n            // 32. If the sum of the length of the two arrays is zero then add\n            // one before rounding down to leave a blank 32 bytes (the length block with 0).\n            mstore(0x40, and(\n                add(add(end, iszero(add(length, mload(_preBytes)))), 31),\n                not(31) // Round down to the nearest 32 bytes.\n            ))\n        }\n\n        return tempBytes;\n    }\n\n    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {\n        assembly {\n            // Read the first 32 bytes of _preBytes storage, which is the length\n            // of the array. (We don't need to use the offset into the slot\n            // because arrays use the entire slot.)\n            let fslot := sload(_preBytes.slot)\n            // Arrays of 31 bytes or less have an even value in their slot,\n            // while longer arrays have an odd value. The actual length is\n            // the slot divided by two for odd values, and the lowest order\n            // byte divided by two for even values.\n            // If the slot is even, bitwise and the slot with 255 and divide by\n            // two to get the length. If the slot is odd, bitwise and the slot\n            // with -1 and divide by two.\n            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)\n            let mlength := mload(_postBytes)\n            let newlength := add(slength, mlength)\n            // slength can contain both the length and contents of the array\n            // if length < 32 bytes so let's prepare for that\n            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage\n            switch add(lt(slength, 32), lt(newlength, 32))\n            case 2 {\n                // Since the new array still fits in the slot, we just need to\n                // update the contents of the slot.\n                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length\n                sstore(\n                    _preBytes.slot,\n                    // all the modifications to the slot are inside this\n                    // next block\n                    add(\n                        // we can just add to the slot contents because the\n                        // bytes we want to change are the LSBs\n                        fslot,\n                        add(\n                            mul(\n                                div(\n                                    // load the bytes from memory\n                                    mload(add(_postBytes, 0x20)),\n                                    // zero all bytes to the right\n                                    exp(0x100, sub(32, mlength))\n                        ),\n                        // and now shift left the number of bytes to\n                        // leave space for the length in the slot\n                        exp(0x100, sub(32, newlength))\n                        ),\n                        // increase length by the double of the memory\n                        // bytes length\n                        mul(mlength, 2)\n                        )\n                    )\n                )\n            }\n            case 1 {\n                // The stored value fits in the slot, but the combined value\n                // will exceed it.\n                // get the keccak hash to get the contents of the array\n                mstore(0x0, _preBytes.slot)\n                let sc := add(keccak256(0x0, 0x20), div(slength, 32))\n\n                // save new length\n                sstore(_preBytes.slot, add(mul(newlength, 2), 1))\n\n                // The contents of the _postBytes array start 32 bytes into\n                // the structure. Our first read should obtain the `submod`\n                // bytes that can fit into the unused space in the last word\n                // of the stored array. To get this, we read 32 bytes starting\n                // from `submod`, so the data we read overlaps with the array\n                // contents by `submod` bytes. Masking the lowest-order\n                // `submod` bytes allows us to add that value directly to the\n                // stored value.\n\n                let submod := sub(32, slength)\n                let mc := add(_postBytes, submod)\n                let end := add(_postBytes, mlength)\n                let mask := sub(exp(0x100, submod), 1)\n\n                sstore(\n                    sc,\n                    add(\n                        and(\n                            fslot,\n                            0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00\n                    ),\n                    and(mload(mc), mask)\n                    )\n                )\n\n                for {\n                    mc := add(mc, 0x20)\n                    sc := add(sc, 1)\n                } lt(mc, end) {\n                    sc := add(sc, 1)\n                    mc := add(mc, 0x20)\n                } {\n                    sstore(sc, mload(mc))\n                }\n\n                mask := exp(0x100, sub(mc, end))\n\n                sstore(sc, mul(div(mload(mc), mask), mask))\n            }\n            default {\n                // get the keccak hash to get the contents of the array\n                mstore(0x0, _preBytes.slot)\n                // Start copying to the last used word of the stored array.\n                let sc := add(keccak256(0x0, 0x20), div(slength, 32))\n\n                // save new length\n                sstore(_preBytes.slot, add(mul(newlength, 2), 1))\n\n                // Copy over the first `submod` bytes of the new data as in\n                // case 1 above.\n                let slengthmod := mod(slength, 32)\n                let mlengthmod := mod(mlength, 32)\n                let submod := sub(32, slengthmod)\n                let mc := add(_postBytes, submod)\n                let end := add(_postBytes, mlength)\n                let mask := sub(exp(0x100, submod), 1)\n\n                sstore(sc, add(sload(sc), and(mload(mc), mask)))\n\n                for {\n                    sc := add(sc, 1)\n                    mc := add(mc, 0x20)\n                } lt(mc, end) {\n                    sc := add(sc, 1)\n                    mc := add(mc, 0x20)\n                } {\n                    sstore(sc, mload(mc))\n                }\n\n                mask := exp(0x100, sub(mc, end))\n\n                sstore(sc, mul(div(mload(mc), mask), mask))\n            }\n        }\n    }\n\n    function slice(bytes memory _bytes, uint _start, uint _length) internal  pure returns (bytes memory res) {\n        if (_length == 0) {\n            return hex\"\";\n        }\n        uint _end = _start + _length;\n        require(_end > _start && _bytes.length >= _end, \"Slice out of bounds\");\n\n        assembly {\n            // Alloc bytes array with additional 32 bytes afterspace and assign it's size\n            res := mload(0x40)\n            mstore(0x40, add(add(res, 64), _length))\n            mstore(res, _length)\n\n            // Compute distance between source and destination pointers\n            let diff := sub(res, add(_bytes, _start))\n\n            for {\n                let src := add(add(_bytes, 32), _start)\n                let end := add(src, _length)\n            } lt(src, end) {\n                src := add(src, 32)\n            } {\n                mstore(add(src, diff), mload(src))\n            }\n        }\n    }\n\n    /// @notice Take a slice of the byte array, overwriting the destination.\n    /// The length of the slice will equal the length of the destination array.\n    /// @dev Make sure the destination array has afterspace if required.\n    /// @param _bytes The source array\n    /// @param _dest The destination array.\n    /// @param _start The location to start in the source array.\n    function sliceInPlace(\n        bytes memory _bytes,\n        bytes memory _dest,\n        uint _start\n    ) internal pure {\n        uint _length = _dest.length;\n        uint _end = _start + _length;\n        require(_end > _start && _bytes.length >= _end, \"Slice out of bounds\");\n\n        assembly {\n            for {\n                let src := add(add(_bytes, 32), _start)\n                let res := add(_dest, 32)\n                let end := add(src, _length)\n            } lt(src, end) {\n                src := add(src, 32)\n                res := add(res, 32)\n            } {\n                mstore(res, mload(src))\n            }\n        }\n    }\n\n    // Static slice functions, no bounds checking\n    /// @notice take a 32-byte slice from the specified position\n    function slice32(bytes memory _bytes, uint _start) internal pure returns (bytes32 res) {\n        assembly {\n            res := mload(add(add(_bytes, 32), _start))\n        }\n    }\n\n    /// @notice take a 20-byte slice from the specified position\n    function slice20(bytes memory _bytes, uint _start) internal pure returns (bytes20) {\n        return bytes20(slice32(_bytes, _start));\n    }\n\n    /// @notice take a 8-byte slice from the specified position\n    function slice8(bytes memory _bytes, uint _start) internal pure returns (bytes8) {\n        return bytes8(slice32(_bytes, _start));\n    }\n\n    /// @notice take a 4-byte slice from the specified position\n    function slice4(bytes memory _bytes, uint _start) internal pure returns (bytes4) {\n        return bytes4(slice32(_bytes, _start));\n    }\n\n    /// @notice take a 3-byte slice from the specified position\n    function slice3(bytes memory _bytes, uint _start) internal pure returns (bytes3) {\n        return bytes3(slice32(_bytes, _start));\n    }\n\n    /// @notice take a 2-byte slice from the specified position\n    function slice2(bytes memory _bytes, uint _start) internal pure returns (bytes2) {\n        return bytes2(slice32(_bytes, _start));\n    }\n\n    function toAddress(bytes memory _bytes, uint _start) internal  pure returns (address) {\n        uint _totalLen = _start + 20;\n        require(_totalLen > _start && _bytes.length >= _totalLen, \"Address conversion out of bounds.\");\n        address tempAddress;\n\n        assembly {\n            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)\n        }\n\n        return tempAddress;\n    }\n\n    function toUint(bytes memory _bytes, uint _start) internal  pure returns (uint256) {\n        uint _totalLen = _start + 32;\n        require(_totalLen > _start && _bytes.length >= _totalLen, \"Uint conversion out of bounds.\");\n        uint256 tempUint;\n\n        assembly {\n            tempUint := mload(add(add(_bytes, 0x20), _start))\n        }\n\n        return tempUint;\n    }\n\n    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {\n        bool success = true;\n\n        assembly {\n            let length := mload(_preBytes)\n\n            // if lengths don't match the arrays are not equal\n            switch eq(length, mload(_postBytes))\n            case 1 {\n                // cb is a circuit breaker in the for loop since there's\n                //  no said feature for inline assembly loops\n                // cb = 1 - don't breaker\n                // cb = 0 - break\n                let cb := 1\n\n                let mc := add(_preBytes, 0x20)\n                let end := add(mc, length)\n\n                for {\n                    let cc := add(_postBytes, 0x20)\n                    // the next line is the loop condition:\n                    // while(uint(mc < end) + cb == 2)\n                } eq(add(lt(mc, end), cb), 2) {\n                    mc := add(mc, 0x20)\n                    cc := add(cc, 0x20)\n                } {\n                    // if any of these checks fails then arrays are not equal\n                    if iszero(eq(mload(mc), mload(cc))) {\n                        // unsuccess:\n                        success := 0\n                        cb := 0\n                    }\n                }\n            }\n            default {\n                // unsuccess:\n                success := 0\n            }\n        }\n\n        return success;\n    }\n\n    function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {\n        bool success = true;\n\n        assembly {\n            // we know _preBytes_offset is 0\n            let fslot := sload(_preBytes.slot)\n            // Decode the length of the stored array like in concatStorage().\n            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)\n            let mlength := mload(_postBytes)\n\n            // if lengths don't match the arrays are not equal\n            switch eq(slength, mlength)\n            case 1 {\n                // slength can contain both the length and contents of the array\n                // if length < 32 bytes so let's prepare for that\n                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage\n                if iszero(iszero(slength)) {\n                    switch lt(slength, 32)\n                    case 1 {\n                        // blank the last byte which is the length\n                        fslot := mul(div(fslot, 0x100), 0x100)\n\n                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {\n                            // unsuccess:\n                            success := 0\n                        }\n                    }\n                    default {\n                        // cb is a circuit breaker in the for loop since there's\n                        //  no said feature for inline assembly loops\n                        // cb = 1 - don't breaker\n                        // cb = 0 - break\n                        let cb := 1\n\n                        // get the keccak hash to get the contents of the array\n                        mstore(0x0, _preBytes.slot)\n                        let sc := keccak256(0x0, 0x20)\n\n                        let mc := add(_postBytes, 0x20)\n                        let end := add(mc, mlength)\n\n                        // the next line is the loop condition:\n                        // while(uint(mc < end) + cb == 2)\n                        for {} eq(add(lt(mc, end), cb), 2) {\n                            sc := add(sc, 1)\n                            mc := add(mc, 0x20)\n                        } {\n                            if iszero(eq(sload(sc), mload(mc))) {\n                                // unsuccess:\n                                success := 0\n                                cb := 0\n                            }\n                        }\n                    }\n                }\n            }\n            default {\n                // unsuccess:\n                success := 0\n            }\n        }\n\n        return success;\n    }\n\n    function toBytes32(bytes memory _source) pure internal returns (bytes32 result) {\n        if (_source.length == 0) {\n            return 0x0;\n        }\n\n        assembly {\n            result := mload(add(_source, 32))\n        }\n    }\n\n    function keccak256Slice(bytes memory _bytes, uint _start, uint _length) pure internal returns (bytes32 result) {\n        uint _end = _start + _length;\n        require(_end > _start && _bytes.length >= _end, \"Slice out of bounds\");\n\n        assembly {\n            result := keccak256(add(add(_bytes, 32), _start), _length)\n        }\n    }\n}\n"
@@ -182,10 +182,10 @@
       "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\n/// @title Interface for the Bitcoin relay\n/// @notice Contains only the methods needed by tBTC v2. The Bitcoin relay\n///         provides the difficulty of the previous and current epoch. One\n///         difficulty epoch spans 2016 blocks.\ninterface IRelay {\n    /// @notice Returns the difficulty of the current epoch.\n    function getCurrentEpochDifficulty() external view returns (uint256);\n\n    /// @notice Returns the difficulty of the previous epoch.\n    function getPrevEpochDifficulty() external view returns (uint256);\n}\n"
     },
     "contracts/bridge/Deposit.sol": {
-      "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\nimport {BTCUtils} from \"@keep-network/bitcoin-spv-sol/contracts/BTCUtils.sol\";\nimport {BytesLib} from \"@keep-network/bitcoin-spv-sol/contracts/BytesLib.sol\";\n\nimport \"./BitcoinTx.sol\";\nimport \"./BridgeState.sol\";\nimport \"./Wallets.sol\";\n\n/// @title Bridge deposit\n/// @notice The library handles the logic for revealing Bitcoin deposits to\n///         the Bridge.\n/// @dev The depositor puts together a P2SH or P2WSH address to deposit the\n///      funds. This script is unique to each depositor and looks like this:\n///\n///      ```\n///      <depositorAddress> DROP\n///      <blindingFactor> DROP\n///      DUP HASH160 <walletPubKeyHash> EQUAL\n///      IF\n///        CHECKSIG\n///      ELSE\n///        DUP HASH160 <refundPubkeyHash> EQUALVERIFY\n///        <refundLocktime> CHECKLOCKTIMEVERIFY DROP\n///        CHECKSIG\n///      ENDIF\n///      ```\n///\n///      Since each depositor has their own Ethereum address and their own\n///      secret blinding factor, each depositor’s script is unique, and the hash\n///      of each depositor’s script is unique.\nlibrary Deposit {\n    using BTCUtils for bytes;\n    using BytesLib for bytes;\n\n    /// @notice Represents data which must be revealed by the depositor during\n    ///         deposit reveal.\n    struct DepositRevealInfo {\n        // Index of the funding output belonging to the funding transaction.\n        uint32 fundingOutputIndex;\n        // Ethereum depositor address.\n        address depositor;\n        // The blinding factor as 8 bytes. Byte endianness doesn't matter\n        // as this factor is not interpreted as uint.\n        bytes8 blindingFactor;\n        // The compressed Bitcoin public key (33 bytes and 02 or 03 prefix)\n        // of the deposit's wallet hashed in the HASH160 Bitcoin opcode style.\n        bytes20 walletPubKeyHash;\n        // The compressed Bitcoin public key (33 bytes and 02 or 03 prefix)\n        // that can be used to make the deposit refund after the refund\n        // locktime passes. Hashed in the HASH160 Bitcoin opcode style.\n        bytes20 refundPubKeyHash;\n        // The refund locktime (4-byte LE). Interpreted according to locktime\n        // parsing rules described in:\n        // https://developer.bitcoin.org/devguide/transactions.html#locktime-and-sequence-number\n        // and used with OP_CHECKLOCKTIMEVERIFY opcode as described in:\n        // https://github.com/bitcoin/bips/blob/master/bip-0065.mediawiki\n        bytes4 refundLocktime;\n        // Address of the Bank vault to which the deposit is routed to.\n        // Optional, can be 0x0. The vault must be trusted by the Bridge.\n        address vault;\n        // This struct doesn't contain `__gap` property as the structure is not\n        // stored, it is used as a function's calldata argument.\n    }\n\n    /// @notice Represents tBTC deposit request data.\n    struct DepositRequest {\n        // Ethereum depositor address.\n        address depositor;\n        // Deposit amount in satoshi.\n        uint64 amount;\n        // UNIX timestamp the deposit was revealed at.\n        uint32 revealedAt;\n        // Address of the Bank vault the deposit is routed to.\n        // Optional, can be 0x0.\n        address vault;\n        // Treasury TBTC fee in satoshi at the moment of deposit reveal.\n        uint64 treasuryFee;\n        // UNIX timestamp the deposit was swept at. Note this is not the\n        // time when the deposit was swept on the Bitcoin chain but actually\n        // the time when the sweep proof was delivered to the Ethereum chain.\n        uint32 sweptAt;\n        // This struct doesn't contain `__gap` property as the structure is stored\n        // in a mapping, mappings store values in different slots and they are\n        // not contiguous with other values.\n    }\n\n    event DepositRevealed(\n        bytes32 fundingTxHash,\n        uint32 fundingOutputIndex,\n        address indexed depositor,\n        uint64 amount,\n        bytes8 blindingFactor,\n        bytes20 indexed walletPubKeyHash,\n        bytes20 refundPubKeyHash,\n        bytes4 refundLocktime,\n        address vault\n    );\n\n    /// @notice Used by the depositor to reveal information about their P2(W)SH\n    ///         Bitcoin deposit to the Bridge on Ethereum chain. The off-chain\n    ///         wallet listens for revealed deposit events and may decide to\n    ///         include the revealed deposit in the next executed sweep.\n    ///         Information about the Bitcoin deposit can be revealed before or\n    ///         after the Bitcoin transaction with P2(W)SH deposit is mined on\n    ///         the Bitcoin chain. Worth noting, the gas cost of this function\n    ///         scales with the number of P2(W)SH transaction inputs and\n    ///         outputs. The deposit may be routed to one of the trusted vaults.\n    ///         When a deposit is routed to a vault, vault gets notified when\n    ///         the deposit gets swept and it may execute the appropriate action.\n    /// @param fundingTx Bitcoin funding transaction data, see `BitcoinTx.Info`\n    /// @param reveal Deposit reveal data, see `RevealInfo struct\n    /// @dev Requirements:\n    ///      - `reveal.walletPubKeyHash` must identify a `Live` wallet\n    ///      - `reveal.vault` must be 0x0 or point to a trusted vault\n    ///      - `reveal.fundingOutputIndex` must point to the actual P2(W)SH\n    ///        output of the BTC deposit transaction\n    ///      - `reveal.depositor` must be the Ethereum address used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - `reveal.blindingFactor` must be the blinding factor used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - `reveal.walletPubKeyHash` must be the wallet pub key hash used in\n    ///        the P2(W)SH BTC deposit transaction,\n    ///      - `reveal.refundPubKeyHash` must be the refund pub key hash used in\n    ///        the P2(W)SH BTC deposit transaction,\n    ///      - `reveal.refundLocktime` must be the refund locktime used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - BTC deposit for the given `fundingTxHash`, `fundingOutputIndex`\n    ///        can be revealed only one time.\n    ///\n    ///      If any of these requirements is not met, the wallet _must_ refuse\n    ///      to sweep the deposit and the depositor has to wait until the\n    ///      deposit script unlocks to receive their BTC back.\n    function revealDeposit(\n        BridgeState.Storage storage self,\n        BitcoinTx.Info calldata fundingTx,\n        DepositRevealInfo calldata reveal\n    ) external {\n        require(\n            self.registeredWallets[reveal.walletPubKeyHash].state ==\n                Wallets.WalletState.Live,\n            \"Wallet must be in Live state\"\n        );\n\n        require(\n            reveal.vault == address(0) || self.isVaultTrusted[reveal.vault],\n            \"Vault is not trusted\"\n        );\n\n        // TODO: Should we enforce a specific locktime at contract level?\n\n        bytes memory expectedScript = abi.encodePacked(\n            hex\"14\", // Byte length of depositor Ethereum address.\n            reveal.depositor,\n            hex\"75\", // OP_DROP\n            hex\"08\", // Byte length of blinding factor value.\n            reveal.blindingFactor,\n            hex\"75\", // OP_DROP\n            hex\"76\", // OP_DUP\n            hex\"a9\", // OP_HASH160\n            hex\"14\", // Byte length of a compressed Bitcoin public key hash.\n            reveal.walletPubKeyHash,\n            hex\"87\", // OP_EQUAL\n            hex\"63\", // OP_IF\n            hex\"ac\", // OP_CHECKSIG\n            hex\"67\", // OP_ELSE\n            hex\"76\", // OP_DUP\n            hex\"a9\", // OP_HASH160\n            hex\"14\", // Byte length of a compressed Bitcoin public key hash.\n            reveal.refundPubKeyHash,\n            hex\"88\", // OP_EQUALVERIFY\n            hex\"04\", // Byte length of refund locktime value.\n            reveal.refundLocktime,\n            hex\"b1\", // OP_CHECKLOCKTIMEVERIFY\n            hex\"75\", // OP_DROP\n            hex\"ac\", // OP_CHECKSIG\n            hex\"68\" // OP_ENDIF\n        );\n\n        bytes memory fundingOutput = fundingTx\n            .outputVector\n            .extractOutputAtIndex(reveal.fundingOutputIndex);\n        bytes memory fundingOutputHash = fundingOutput.extractHash();\n\n        if (fundingOutputHash.length == 20) {\n            // A 20-byte output hash is used by P2SH. That hash is constructed\n            // by applying OP_HASH160 on the locking script. A 20-byte output\n            // hash is used as well by P2PKH and P2WPKH (OP_HASH160 on the\n            // public key). However, since we compare the actual output hash\n            // with an expected locking script hash, this check will succeed only\n            // for P2SH transaction type with expected script hash value. For\n            // P2PKH and P2WPKH, it will fail on the output hash comparison with\n            // the expected locking script hash.\n            require(\n                fundingOutputHash.slice20(0) == expectedScript.hash160View(),\n                \"Wrong 20-byte script hash\"\n            );\n        } else if (fundingOutputHash.length == 32) {\n            // A 32-byte output hash is used by P2WSH. That hash is constructed\n            // by applying OP_SHA256 on the locking script.\n            require(\n                fundingOutputHash.toBytes32() == sha256(expectedScript),\n                \"Wrong 32-byte script hash\"\n            );\n        } else {\n            revert(\"Wrong script hash length\");\n        }\n\n        // Resulting TX hash is in native Bitcoin little-endian format.\n        bytes32 fundingTxHash = abi\n            .encodePacked(\n                fundingTx.version,\n                fundingTx.inputVector,\n                fundingTx.outputVector,\n                fundingTx.locktime\n            )\n            .hash256View();\n\n        DepositRequest storage deposit = self.deposits[\n            uint256(\n                keccak256(\n                    abi.encodePacked(fundingTxHash, reveal.fundingOutputIndex)\n                )\n            )\n        ];\n        require(deposit.revealedAt == 0, \"Deposit already revealed\");\n\n        uint64 fundingOutputAmount = fundingOutput.extractValue();\n\n        require(\n            fundingOutputAmount >= self.depositDustThreshold,\n            \"Deposit amount too small\"\n        );\n\n        deposit.amount = fundingOutputAmount;\n        deposit.depositor = reveal.depositor;\n        /* solhint-disable-next-line not-rely-on-time */\n        deposit.revealedAt = uint32(block.timestamp);\n        deposit.vault = reveal.vault;\n        deposit.treasuryFee = self.depositTreasuryFeeDivisor > 0\n            ? fundingOutputAmount / self.depositTreasuryFeeDivisor\n            : 0;\n        // slither-disable-next-line reentrancy-events\n        emit DepositRevealed(\n            fundingTxHash,\n            reveal.fundingOutputIndex,\n            reveal.depositor,\n            fundingOutputAmount,\n            reveal.blindingFactor,\n            reveal.walletPubKeyHash,\n            reveal.refundPubKeyHash,\n            reveal.refundLocktime,\n            reveal.vault\n        );\n    }\n}\n"
+      "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\nimport {BTCUtils} from \"@keep-network/bitcoin-spv-sol/contracts/BTCUtils.sol\";\nimport {BytesLib} from \"@keep-network/bitcoin-spv-sol/contracts/BytesLib.sol\";\n\nimport \"./BitcoinTx.sol\";\nimport \"./BridgeState.sol\";\nimport \"./Wallets.sol\";\n\n/// @title Bridge deposit\n/// @notice The library handles the logic for revealing Bitcoin deposits to\n///         the Bridge.\n/// @dev The depositor puts together a P2SH or P2WSH address to deposit the\n///      funds. This script is unique to each depositor and looks like this:\n///\n///      ```\n///      <depositorAddress> DROP\n///      <blindingFactor> DROP\n///      DUP HASH160 <walletPubKeyHash> EQUAL\n///      IF\n///        CHECKSIG\n///      ELSE\n///        DUP HASH160 <refundPubkeyHash> EQUALVERIFY\n///        <refundLocktime> CHECKLOCKTIMEVERIFY DROP\n///        CHECKSIG\n///      ENDIF\n///      ```\n///\n///      Since each depositor has their own Ethereum address and their own\n///      secret blinding factor, each depositor’s script is unique, and the hash\n///      of each depositor’s script is unique.\nlibrary Deposit {\n    using BTCUtils for bytes;\n    using BytesLib for bytes;\n\n    /// @notice Represents data which must be revealed by the depositor during\n    ///         deposit reveal.\n    struct DepositRevealInfo {\n        // Index of the funding output belonging to the funding transaction.\n        uint32 fundingOutputIndex;\n        // Ethereum depositor address.\n        address depositor;\n        // The blinding factor as 8 bytes. Byte endianness doesn't matter\n        // as this factor is not interpreted as uint.\n        bytes8 blindingFactor;\n        // The compressed Bitcoin public key (33 bytes and 02 or 03 prefix)\n        // of the deposit's wallet hashed in the HASH160 Bitcoin opcode style.\n        bytes20 walletPubKeyHash;\n        // The compressed Bitcoin public key (33 bytes and 02 or 03 prefix)\n        // that can be used to make the deposit refund after the refund\n        // locktime passes. Hashed in the HASH160 Bitcoin opcode style.\n        bytes20 refundPubKeyHash;\n        // The refund locktime (4-byte LE). Interpreted according to locktime\n        // parsing rules described in:\n        // https://developer.bitcoin.org/devguide/transactions.html#locktime-and-sequence-number\n        // and used with OP_CHECKLOCKTIMEVERIFY opcode as described in:\n        // https://github.com/bitcoin/bips/blob/master/bip-0065.mediawiki\n        bytes4 refundLocktime;\n        // Address of the Bank vault to which the deposit is routed to.\n        // Optional, can be 0x0. The vault must be trusted by the Bridge.\n        address vault;\n        // This struct doesn't contain `__gap` property as the structure is not\n        // stored, it is used as a function's calldata argument.\n    }\n\n    /// @notice Represents tBTC deposit request data.\n    struct DepositRequest {\n        // Ethereum depositor address.\n        address depositor;\n        // Deposit amount in satoshi.\n        uint64 amount;\n        // UNIX timestamp the deposit was revealed at.\n        uint32 revealedAt;\n        // Address of the Bank vault the deposit is routed to.\n        // Optional, can be 0x0.\n        address vault;\n        // Treasury TBTC fee in satoshi at the moment of deposit reveal.\n        uint64 treasuryFee;\n        // UNIX timestamp the deposit was swept at. Note this is not the\n        // time when the deposit was swept on the Bitcoin chain but actually\n        // the time when the sweep proof was delivered to the Ethereum chain.\n        uint32 sweptAt;\n        // This struct doesn't contain `__gap` property as the structure is stored\n        // in a mapping, mappings store values in different slots and they are\n        // not contiguous with other values.\n    }\n\n    event DepositRevealed(\n        bytes32 fundingTxHash,\n        uint32 fundingOutputIndex,\n        address indexed depositor,\n        uint64 amount,\n        bytes8 blindingFactor,\n        bytes20 indexed walletPubKeyHash,\n        bytes20 refundPubKeyHash,\n        bytes4 refundLocktime,\n        address vault\n    );\n\n    /// @notice Used by the depositor to reveal information about their P2(W)SH\n    ///         Bitcoin deposit to the Bridge on Ethereum chain. The off-chain\n    ///         wallet listens for revealed deposit events and may decide to\n    ///         include the revealed deposit in the next executed sweep.\n    ///         Information about the Bitcoin deposit can be revealed before or\n    ///         after the Bitcoin transaction with P2(W)SH deposit is mined on\n    ///         the Bitcoin chain. Worth noting, the gas cost of this function\n    ///         scales with the number of P2(W)SH transaction inputs and\n    ///         outputs. The deposit may be routed to one of the trusted vaults.\n    ///         When a deposit is routed to a vault, vault gets notified when\n    ///         the deposit gets swept and it may execute the appropriate action.\n    /// @param fundingTx Bitcoin funding transaction data, see `BitcoinTx.Info`\n    /// @param reveal Deposit reveal data, see `RevealInfo struct\n    /// @dev Requirements:\n    ///      - `reveal.walletPubKeyHash` must identify a `Live` wallet\n    ///      - `reveal.vault` must be 0x0 or point to a trusted vault\n    ///      - `reveal.fundingOutputIndex` must point to the actual P2(W)SH\n    ///        output of the BTC deposit transaction\n    ///      - `reveal.depositor` must be the Ethereum address used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - `reveal.blindingFactor` must be the blinding factor used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - `reveal.walletPubKeyHash` must be the wallet pub key hash used in\n    ///        the P2(W)SH BTC deposit transaction,\n    ///      - `reveal.refundPubKeyHash` must be the refund pub key hash used in\n    ///        the P2(W)SH BTC deposit transaction,\n    ///      - `reveal.refundLocktime` must be the refund locktime used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - BTC deposit for the given `fundingTxHash`, `fundingOutputIndex`\n    ///        can be revealed only one time.\n    ///\n    ///      If any of these requirements is not met, the wallet _must_ refuse\n    ///      to sweep the deposit and the depositor has to wait until the\n    ///      deposit script unlocks to receive their BTC back.\n    function revealDeposit(\n        BridgeState.Storage storage self,\n        BitcoinTx.Info calldata fundingTx,\n        DepositRevealInfo calldata reveal\n    ) external {\n        require(\n            self.registeredWallets[reveal.walletPubKeyHash].state ==\n                Wallets.WalletState.Live,\n            \"Wallet must be in Live state\"\n        );\n\n        require(\n            reveal.vault == address(0) || self.isVaultTrusted[reveal.vault],\n            \"Vault is not trusted\"\n        );\n\n        bytes memory expectedScript = abi.encodePacked(\n            hex\"14\", // Byte length of depositor Ethereum address.\n            reveal.depositor,\n            hex\"75\", // OP_DROP\n            hex\"08\", // Byte length of blinding factor value.\n            reveal.blindingFactor,\n            hex\"75\", // OP_DROP\n            hex\"76\", // OP_DUP\n            hex\"a9\", // OP_HASH160\n            hex\"14\", // Byte length of a compressed Bitcoin public key hash.\n            reveal.walletPubKeyHash,\n            hex\"87\", // OP_EQUAL\n            hex\"63\", // OP_IF\n            hex\"ac\", // OP_CHECKSIG\n            hex\"67\", // OP_ELSE\n            hex\"76\", // OP_DUP\n            hex\"a9\", // OP_HASH160\n            hex\"14\", // Byte length of a compressed Bitcoin public key hash.\n            reveal.refundPubKeyHash,\n            hex\"88\", // OP_EQUALVERIFY\n            hex\"04\", // Byte length of refund locktime value.\n            reveal.refundLocktime,\n            hex\"b1\", // OP_CHECKLOCKTIMEVERIFY\n            hex\"75\", // OP_DROP\n            hex\"ac\", // OP_CHECKSIG\n            hex\"68\" // OP_ENDIF\n        );\n\n        bytes memory fundingOutput = fundingTx\n            .outputVector\n            .extractOutputAtIndex(reveal.fundingOutputIndex);\n        bytes memory fundingOutputHash = fundingOutput.extractHash();\n\n        if (fundingOutputHash.length == 20) {\n            // A 20-byte output hash is used by P2SH. That hash is constructed\n            // by applying OP_HASH160 on the locking script. A 20-byte output\n            // hash is used as well by P2PKH and P2WPKH (OP_HASH160 on the\n            // public key). However, since we compare the actual output hash\n            // with an expected locking script hash, this check will succeed only\n            // for P2SH transaction type with expected script hash value. For\n            // P2PKH and P2WPKH, it will fail on the output hash comparison with\n            // the expected locking script hash.\n            require(\n                fundingOutputHash.slice20(0) == expectedScript.hash160View(),\n                \"Wrong 20-byte script hash\"\n            );\n        } else if (fundingOutputHash.length == 32) {\n            // A 32-byte output hash is used by P2WSH. That hash is constructed\n            // by applying OP_SHA256 on the locking script.\n            require(\n                fundingOutputHash.toBytes32() == sha256(expectedScript),\n                \"Wrong 32-byte script hash\"\n            );\n        } else {\n            revert(\"Wrong script hash length\");\n        }\n\n        // Resulting TX hash is in native Bitcoin little-endian format.\n        bytes32 fundingTxHash = abi\n            .encodePacked(\n                fundingTx.version,\n                fundingTx.inputVector,\n                fundingTx.outputVector,\n                fundingTx.locktime\n            )\n            .hash256View();\n\n        DepositRequest storage deposit = self.deposits[\n            uint256(\n                keccak256(\n                    abi.encodePacked(fundingTxHash, reveal.fundingOutputIndex)\n                )\n            )\n        ];\n        require(deposit.revealedAt == 0, \"Deposit already revealed\");\n\n        uint64 fundingOutputAmount = fundingOutput.extractValue();\n\n        require(\n            fundingOutputAmount >= self.depositDustThreshold,\n            \"Deposit amount too small\"\n        );\n\n        deposit.amount = fundingOutputAmount;\n        deposit.depositor = reveal.depositor;\n        /* solhint-disable-next-line not-rely-on-time */\n        deposit.revealedAt = uint32(block.timestamp);\n        deposit.vault = reveal.vault;\n        deposit.treasuryFee = self.depositTreasuryFeeDivisor > 0\n            ? fundingOutputAmount / self.depositTreasuryFeeDivisor\n            : 0;\n        // slither-disable-next-line reentrancy-events\n        emit DepositRevealed(\n            fundingTxHash,\n            reveal.fundingOutputIndex,\n            reveal.depositor,\n            fundingOutputAmount,\n            reveal.blindingFactor,\n            reveal.walletPubKeyHash,\n            reveal.refundPubKeyHash,\n            reveal.refundLocktime,\n            reveal.vault\n        );\n    }\n}\n"
     },
     "contracts/bridge/Redemption.sol": {
-      "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\nimport {BTCUtils} from \"@keep-network/bitcoin-spv-sol/contracts/BTCUtils.sol\";\nimport {BytesLib} from \"@keep-network/bitcoin-spv-sol/contracts/BytesLib.sol\";\n\nimport \"./BitcoinTx.sol\";\nimport \"./BridgeState.sol\";\nimport \"./Wallets.sol\";\n\nimport \"../bank/Bank.sol\";\n\n/// @notice Aggregates functions common to the redemption transaction proof\n///         validation and to the moving funds transaction proof validation.\nlibrary OutboundTx {\n    using BTCUtils for bytes;\n\n    /// @notice Checks whether an outbound Bitcoin transaction performed from\n    ///         the given wallet has an input vector that contains a single\n    ///         input referring to the wallet's main UTXO. Marks that main UTXO\n    ///         as correctly spent if the validation succeeds. Reverts otherwise.\n    ///         There are two outbound transactions from a wallet possible: a\n    ///         redemption transaction or a moving funds to another wallet\n    ///         transaction.\n    /// @param walletOutboundTxInputVector Bitcoin outbound transaction's input\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVin` function\n    ///        before it is passed here\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain.\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the outbound transaction.\n    function processWalletOutboundTxInput(\n        BridgeState.Storage storage self,\n        bytes memory walletOutboundTxInputVector,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes20 walletPubKeyHash\n    ) internal {\n        // Assert that main UTXO for passed wallet exists in storage.\n        bytes32 mainUtxoHash = self\n            .registeredWallets[walletPubKeyHash]\n            .mainUtxoHash;\n        require(mainUtxoHash != bytes32(0), \"No main UTXO for given wallet\");\n\n        // Assert that passed main UTXO parameter is the same as in storage and\n        // can be used for further processing.\n        require(\n            keccak256(\n                abi.encodePacked(\n                    mainUtxo.txHash,\n                    mainUtxo.txOutputIndex,\n                    mainUtxo.txOutputValue\n                )\n            ) == mainUtxoHash,\n            \"Invalid main UTXO data\"\n        );\n\n        // Assert that the single outbound transaction input actually\n        // refers to the wallet's main UTXO.\n        (\n            bytes32 outpointTxHash,\n            uint32 outpointIndex\n        ) = parseWalletOutboundTxInput(walletOutboundTxInputVector);\n        require(\n            mainUtxo.txHash == outpointTxHash &&\n                mainUtxo.txOutputIndex == outpointIndex,\n            \"Outbound transaction input must point to the wallet's main UTXO\"\n        );\n\n        // Main UTXO used as an input, mark it as spent.\n        self.spentMainUTXOs[\n            uint256(\n                keccak256(\n                    abi.encodePacked(mainUtxo.txHash, mainUtxo.txOutputIndex)\n                )\n            )\n        ] = true;\n    }\n\n    /// @notice Parses the input vector of an outbound Bitcoin transaction\n    ///         performed from the given wallet. It extracts the single input\n    ///         then the transaction hash and output index from its outpoint.\n    ///         There are two outbound transactions from a wallet possible: a\n    ///         redemption transaction or a moving funds to another wallet\n    ///         transaction.\n    /// @param walletOutboundTxInputVector Bitcoin outbound transaction input\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVin` function\n    ///        before it is passed here\n    /// @return outpointTxHash 32-byte hash of the Bitcoin transaction which is\n    ///         pointed in the input's outpoint.\n    /// @return outpointIndex 4-byte index of the Bitcoin transaction output\n    ///         which is pointed in the input's outpoint.\n    function parseWalletOutboundTxInput(\n        bytes memory walletOutboundTxInputVector\n    ) internal pure returns (bytes32 outpointTxHash, uint32 outpointIndex) {\n        // To determine the total number of Bitcoin transaction inputs,\n        // we need to parse the compactSize uint (VarInt) the input vector is\n        // prepended by. That compactSize uint encodes the number of vector\n        // elements using the format presented in:\n        // https://developer.bitcoin.org/reference/transactions.html#compactsize-unsigned-integers\n        // We don't need asserting the compactSize uint is parseable since it\n        // was already checked during `validateVin` validation.\n        // See `BitcoinTx.inputVector` docs for more details.\n        (, uint256 inputsCount) = walletOutboundTxInputVector.parseVarInt();\n        require(\n            inputsCount == 1,\n            \"Outbound transaction must have a single input\"\n        );\n\n        bytes memory input = walletOutboundTxInputVector.extractInputAtIndex(0);\n\n        outpointTxHash = input.extractInputTxIdLE();\n\n        outpointIndex = BTCUtils.reverseUint32(\n            uint32(input.extractTxIndexLE())\n        );\n\n        // There is only one input in the transaction. Input has an outpoint\n        // field that is a reference to the transaction being spent (see\n        // `BitcoinTx` docs). The outpoint contains the hash of the transaction\n        // to spend (`outpointTxHash`) and the index of the specific output\n        // from that transaction (`outpointIndex`).\n        return (outpointTxHash, outpointIndex);\n    }\n}\n\n/// @title Bridge redemption\n/// @notice The library handles the logic for redeeming Bitcoin balances from\n///         the Bridge.\n/// @dev To initiate a redemption, a user with a Bank balance supplies\n///      a Bitcoin address. Then, the system calculates the redemption fee, and\n///      releases balance to the provided Bitcoin address. Just like in case of\n///      sweeps of revealed deposits, redemption requests are processed in\n///      batches and require SPV proof to be submitted to the Bridge.\nlibrary Redemption {\n    using BridgeState for BridgeState.Storage;\n    using Wallets for BridgeState.Storage;\n    using BitcoinTx for BridgeState.Storage;\n\n    using BTCUtils for bytes;\n    using BytesLib for bytes;\n\n    /// @notice Represents a redemption request.\n    struct RedemptionRequest {\n        // ETH address of the redeemer who created the request.\n        address redeemer;\n        // Requested TBTC amount in satoshi.\n        uint64 requestedAmount;\n        // Treasury TBTC fee in satoshi at the moment of request creation.\n        uint64 treasuryFee;\n        // Transaction maximum BTC fee in satoshi at the moment of request\n        // creation.\n        uint64 txMaxFee;\n        // UNIX timestamp the request was created at.\n        uint32 requestedAt;\n        // This struct doesn't contain `__gap` property as the structure is stored\n        // in a mapping, mappings store values in different slots and they are\n        // not contiguous with other values.\n    }\n\n    /// @notice Represents an outcome of the redemption Bitcoin transaction\n    ///         outputs processing.\n    struct RedemptionTxOutputsInfo {\n        // Total TBTC value in satoshi that should be burned by the Bridge.\n        // It includes the total amount of all BTC redeemed in the transaction\n        // and the fee paid to BTC miners for the redemption transaction.\n        uint64 totalBurnableValue;\n        // Total TBTC value in satoshi that should be transferred to\n        // the treasury. It is a sum of all treasury fees paid by all\n        // redeemers included in the redemption transaction.\n        uint64 totalTreasuryFee;\n        // Index of the change output. The change output becomes\n        // the new main wallet's UTXO.\n        uint32 changeIndex;\n        // Value in satoshi of the change output.\n        uint64 changeValue;\n        // This struct doesn't contain `__gap` property as the structure is not\n        // stored, it is used as a function's memory argument.\n    }\n\n    /// @notice Represents temporary information needed during the processing of\n    ///         the redemption Bitcoin transaction outputs. This structure is an\n    ///         internal one and should not be exported outside of the redemption\n    ///         transaction processing code.\n    /// @dev Allows to mitigate \"stack too deep\" errors on EVM.\n    struct RedemptionTxOutputsProcessingInfo {\n        // The first output starting index in the transaction.\n        uint256 outputStartingIndex;\n        // The number of outputs in the transaction.\n        uint256 outputsCount;\n        // P2PKH script for the wallet. Needed to determine the change output.\n        bytes32 walletP2PKHScriptKeccak;\n        // P2WPKH script for the wallet. Needed to determine the change output.\n        bytes32 walletP2WPKHScriptKeccak;\n        // This struct doesn't contain `__gap` property as the structure is not\n        // stored, it is used as a function's memory argument.\n    }\n\n    event RedemptionRequested(\n        bytes20 indexed walletPubKeyHash,\n        bytes redeemerOutputScript,\n        address indexed redeemer,\n        uint64 requestedAmount,\n        uint64 treasuryFee,\n        uint64 txMaxFee\n    );\n\n    event RedemptionsCompleted(\n        bytes20 indexed walletPubKeyHash,\n        bytes32 redemptionTxHash\n    );\n\n    event RedemptionTimedOut(\n        bytes20 indexed walletPubKeyHash,\n        bytes redeemerOutputScript\n    );\n\n    /// @notice Requests redemption of the given amount from the specified\n    ///         wallet to the redeemer Bitcoin output script.\n    /// @param walletPubKeyHash The 20-byte wallet public key hash (computed\n    ///        using Bitcoin HASH160 over the compressed ECDSA public key)\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain\n    /// @param redeemerOutputScript The redeemer's length-prefixed output\n    ///        script (P2PKH, P2WPKH, P2SH or P2WSH) that will be used to lock\n    ///        redeemed BTC\n    /// @param amount Requested amount in satoshi. This is also the TBTC amount\n    ///        that is taken from redeemer's balance in the Bank upon request.\n    ///        Once the request is handled, the actual amount of BTC locked\n    ///        on the redeemer output script will be always lower than this value\n    ///        since the treasury and Bitcoin transaction fees must be incurred.\n    ///        The minimal amount satisfying the request can be computed as:\n    ///        `amount - (amount / redemptionTreasuryFeeDivisor) - redemptionTxMaxFee`.\n    ///        Fees values are taken at the moment of request creation.\n    /// @dev Requirements:\n    ///      - Wallet behind `walletPubKeyHash` must be live\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///      - `redeemerOutputScript` must be a proper Bitcoin script\n    ///      - `redeemerOutputScript` cannot have wallet PKH as payload\n    ///      - `amount` must be above or equal the `redemptionDustThreshold`\n    ///      - Given `walletPubKeyHash` and `redeemerOutputScript` pair can be\n    ///        used for only one pending request at the same time\n    ///      - Wallet must have enough Bitcoin balance to proceed the request\n    ///      - Redeemer must make an allowance in the Bank that the Bridge\n    ///        contract can spend the given `amount`.\n    function requestRedemption(\n        BridgeState.Storage storage self,\n        bytes20 walletPubKeyHash,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes calldata redeemerOutputScript,\n        uint64 amount\n    ) external {\n        Wallets.Wallet storage wallet = self.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        require(\n            wallet.state == Wallets.WalletState.Live,\n            \"Wallet must be in Live state\"\n        );\n\n        bytes32 mainUtxoHash = wallet.mainUtxoHash;\n        require(\n            mainUtxoHash != bytes32(0),\n            \"No main UTXO for the given wallet\"\n        );\n        require(\n            keccak256(\n                abi.encodePacked(\n                    mainUtxo.txHash,\n                    mainUtxo.txOutputIndex,\n                    mainUtxo.txOutputValue\n                )\n            ) == mainUtxoHash,\n            \"Invalid main UTXO data\"\n        );\n\n        // TODO: Confirm if `walletPubKeyHash` should be validated by checking\n        //       if it is the oldest one who can handle the request. This will\n        //       be suggested by the dApp but may not be respected by users who\n        //       interact directly with the contract. Do we need to enforce it\n        //       here? One option is not to enforce it, to save on gas, but if\n        //       we see this rule is not respected, upgrade Bridge contract to\n        //       require it.\n\n        // Validate if redeemer output script is a correct standard type\n        // (P2PKH, P2WPKH, P2SH or P2WSH). This is done by building a stub\n        // output with 0 as value and using `BTCUtils.extractHash` on it. Such\n        // a function extracts the payload properly only from standard outputs\n        // so if it succeeds, we have a guarantee the redeemer output script\n        // is proper. Worth to note `extractHash` ignores the value at all\n        // so this is why we can use 0 safely. This way of validation is the\n        // same as in tBTC v1.\n        bytes memory redeemerOutputScriptPayload = abi\n            .encodePacked(bytes8(0), redeemerOutputScript)\n            .extractHash();\n        require(\n            redeemerOutputScriptPayload.length > 0,\n            \"Redeemer output script must be a standard type\"\n        );\n        // Check if the redeemer output script payload does not point to the\n        // wallet public key hash.\n        require(\n            keccak256(abi.encodePacked(walletPubKeyHash)) !=\n                keccak256(redeemerOutputScriptPayload),\n            \"Redeemer output script must not point to the wallet PKH\"\n        );\n\n        require(\n            amount >= self.redemptionDustThreshold,\n            \"Redemption amount too small\"\n        );\n\n        // The redemption key is built on top of the wallet public key hash\n        // and redeemer output script pair. That means there can be only one\n        // request asking for redemption from the given wallet to the given\n        // BTC script at the same time.\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, redeemerOutputScript))\n        );\n\n        // Check if given redemption key is not used by a pending redemption.\n        // There is no need to check for existence in `timedOutRedemptions`\n        // since the wallet's state is changed to other than Live after\n        // first time out is reported so making new requests is not possible.\n        // slither-disable-next-line incorrect-equality\n        require(\n            self.pendingRedemptions[redemptionKey].requestedAt == 0,\n            \"There is a pending redemption request from this wallet to the same address\"\n        );\n\n        // No need to check whether `amount - treasuryFee - txMaxFee > 0`\n        // since the `redemptionDustThreshold` should force that condition\n        // to be always true.\n        uint64 treasuryFee = self.redemptionTreasuryFeeDivisor > 0\n            ? amount / self.redemptionTreasuryFeeDivisor\n            : 0;\n        uint64 txMaxFee = self.redemptionTxMaxFee;\n\n        // The main wallet UTXO's value doesn't include all pending redemptions.\n        // To determine if the requested redemption can be performed by the\n        // wallet we need to subtract the total value of all pending redemptions\n        // from that wallet's main UTXO value. Given that the treasury fee is\n        // not redeemed from the wallet, we are subtracting it.\n        wallet.pendingRedemptionsValue += amount - treasuryFee;\n        require(\n            mainUtxo.txOutputValue >= wallet.pendingRedemptionsValue,\n            \"Insufficient wallet funds\"\n        );\n\n        self.pendingRedemptions[redemptionKey] = RedemptionRequest(\n            msg.sender,\n            amount,\n            treasuryFee,\n            txMaxFee,\n            /* solhint-disable-next-line not-rely-on-time */\n            uint32(block.timestamp)\n        );\n\n        emit RedemptionRequested(\n            walletPubKeyHash,\n            redeemerOutputScript,\n            msg.sender,\n            amount,\n            treasuryFee,\n            txMaxFee\n        );\n\n        self.bank.transferBalanceFrom(msg.sender, address(this), amount);\n    }\n\n    /// @notice Used by the wallet to prove the BTC redemption transaction\n    ///         and to make the necessary bookkeeping. Redemption is only\n    ///         accepted if it satisfies SPV proof.\n    ///\n    ///         The function is performing Bank balance updates by burning\n    ///         the total redeemed Bitcoin amount from Bridge balance and\n    ///         transferring the treasury fee sum to the treasury address.\n    ///\n    ///         It is possible to prove the given redemption only one time.\n    /// @param redemptionTx Bitcoin redemption transaction data\n    /// @param redemptionProof Bitcoin redemption proof data\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    ///        HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction\n    /// @dev Requirements:\n    ///      - `redemptionTx` components must match the expected structure. See\n    ///        `BitcoinTx.Info` docs for reference. Their values must exactly\n    ///        correspond to appropriate Bitcoin transaction fields to produce\n    ///        a provable transaction hash.\n    ///      - The `redemptionTx` should represent a Bitcoin transaction with\n    ///        exactly 1 input that refers to the wallet's main UTXO. That\n    ///        transaction should have 1..n outputs handling existing pending\n    ///        redemption requests or pointing to reported timed out requests.\n    ///        There can be also 1 optional output representing the\n    ///        change and pointing back to the 20-byte wallet public key hash.\n    ///        The change should be always present if the redeemed value sum\n    ///        is lower than the total wallet's BTC balance.\n    ///      - `redemptionProof` components must match the expected structure.\n    ///        See `BitcoinTx.Proof` docs for reference. The `bitcoinHeaders`\n    ///        field must contain a valid number of block headers, not less\n    ///        than the `txProofDifficultyFactor` contract constant.\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///        Additionally, the recent main UTXO on Ethereum must be set.\n    ///      - `walletPubKeyHash` must be connected with the main UTXO used\n    ///        as transaction single input.\n    ///      Other remarks:\n    ///      - Putting the change output as the first transaction output can\n    ///        save some gas because the output processing loop begins each\n    ///        iteration by checking whether the given output is the change\n    ///        thus uses some gas for making the comparison. Once the change\n    ///        is identified, that check is omitted in further iterations.\n    function submitRedemptionProof(\n        BridgeState.Storage storage self,\n        BitcoinTx.Info calldata redemptionTx,\n        BitcoinTx.Proof calldata redemptionProof,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes20 walletPubKeyHash\n    ) external {\n        // The actual transaction proof is performed here. After that point, we\n        // can assume the transaction happened on Bitcoin chain and has\n        // a sufficient number of confirmations as determined by\n        // `txProofDifficultyFactor` constant.\n        bytes32 redemptionTxHash = self.validateProof(\n            redemptionTx,\n            redemptionProof\n        );\n\n        // Process the redemption transaction input. Specifically, check if it\n        // refers to the expected wallet's main UTXO.\n        OutboundTx.processWalletOutboundTxInput(\n            self,\n            redemptionTx.inputVector,\n            mainUtxo,\n            walletPubKeyHash\n        );\n\n        Wallets.Wallet storage wallet = self.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        Wallets.WalletState walletState = wallet.state;\n        require(\n            walletState == Wallets.WalletState.Live ||\n                walletState == Wallets.WalletState.MovingFunds,\n            \"Wallet must be in Live or MovingFunds state\"\n        );\n\n        // Process redemption transaction outputs to extract some info required\n        // for further processing.\n        RedemptionTxOutputsInfo memory outputsInfo = processRedemptionTxOutputs(\n            self,\n            redemptionTx.outputVector,\n            walletPubKeyHash\n        );\n\n        if (outputsInfo.changeValue > 0) {\n            // If the change value is grater than zero, it means the change\n            // output exists and can be used as new wallet's main UTXO.\n            wallet.mainUtxoHash = keccak256(\n                abi.encodePacked(\n                    redemptionTxHash,\n                    outputsInfo.changeIndex,\n                    outputsInfo.changeValue\n                )\n            );\n        } else {\n            // If the change value is zero, it means the change output doesn't\n            // exists and no funds left on the wallet. Delete the main UTXO\n            // for that wallet to represent that state in a proper way.\n            delete wallet.mainUtxoHash;\n        }\n\n        wallet.pendingRedemptionsValue -= outputsInfo.totalBurnableValue;\n\n        emit RedemptionsCompleted(walletPubKeyHash, redemptionTxHash);\n\n        self.bank.decreaseBalance(outputsInfo.totalBurnableValue);\n        self.bank.transferBalance(self.treasury, outputsInfo.totalTreasuryFee);\n    }\n\n    /// @notice Processes the Bitcoin redemption transaction output vector.\n    ///         It extracts each output and tries to identify it as a pending\n    ///         redemption request, reported timed out request, or change.\n    ///         Reverts if one of the outputs cannot be recognized properly.\n    ///         This function also marks each request as processed by removing\n    ///         them from `pendingRedemptions` mapping.\n    /// @param redemptionTxOutputVector Bitcoin redemption transaction output\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVout` function\n    ///        before it is passed here\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction.\n    /// @return info Outcomes of the processing.\n    function processRedemptionTxOutputs(\n        BridgeState.Storage storage self,\n        bytes memory redemptionTxOutputVector,\n        bytes20 walletPubKeyHash\n    ) internal returns (RedemptionTxOutputsInfo memory info) {\n        // Determining the total number of redemption transaction outputs in\n        // the same way as for number of inputs. See `BitcoinTx.outputVector`\n        // docs for more details.\n        (\n            uint256 outputsCompactSizeUintLength,\n            uint256 outputsCount\n        ) = redemptionTxOutputVector.parseVarInt();\n\n        // To determine the first output starting index, we must jump over\n        // the compactSize uint which prepends the output vector. One byte\n        // must be added because `BtcUtils.parseVarInt` does not include\n        // compactSize uint tag in the returned length.\n        //\n        // For >= 0 && <= 252, `BTCUtils.determineVarIntDataLengthAt`\n        // returns `0`, so we jump over one byte of compactSize uint.\n        //\n        // For >= 253 && <= 0xffff there is `0xfd` tag,\n        // `BTCUtils.determineVarIntDataLengthAt` returns `2` (no\n        // tag byte included) so we need to jump over 1+2 bytes of\n        // compactSize uint.\n        //\n        // Please refer `BTCUtils` library and compactSize uint\n        // docs in `BitcoinTx` library for more details.\n        uint256 outputStartingIndex = 1 + outputsCompactSizeUintLength;\n\n        // Calculate the keccak256 for two possible wallet's P2PKH or P2WPKH\n        // scripts that can be used to lock the change. This is done upfront to\n        // save on gas. Both scripts have a strict format defined by Bitcoin.\n        //\n        // The P2PKH script has the byte format: <0x1976a914> <20-byte PKH> <0x88ac>.\n        // According to https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n        // - 0x19: Byte length of the entire script\n        // - 0x76: OP_DUP\n        // - 0xa9: OP_HASH160\n        // - 0x14: Byte length of the public key hash\n        // - 0x88: OP_EQUALVERIFY\n        // - 0xac: OP_CHECKSIG\n        // which matches the P2PKH structure as per:\n        // https://en.bitcoin.it/wiki/Transaction#Pay-to-PubkeyHash\n        bytes32 walletP2PKHScriptKeccak = keccak256(\n            abi.encodePacked(hex\"1976a914\", walletPubKeyHash, hex\"88ac\")\n        );\n        // The P2WPKH script has the byte format: <0x160014> <20-byte PKH>.\n        // According to https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n        // - 0x16: Byte length of the entire script\n        // - 0x00: OP_0\n        // - 0x14: Byte length of the public key hash\n        // which matches the P2WPKH structure as per:\n        // https://github.com/bitcoin/bips/blob/master/bip-0141.mediawiki#P2WPKH\n        bytes32 walletP2WPKHScriptKeccak = keccak256(\n            abi.encodePacked(hex\"160014\", walletPubKeyHash)\n        );\n\n        return\n            processRedemptionTxOutputs(\n                self,\n                redemptionTxOutputVector,\n                walletPubKeyHash,\n                RedemptionTxOutputsProcessingInfo(\n                    outputStartingIndex,\n                    outputsCount,\n                    walletP2PKHScriptKeccak,\n                    walletP2WPKHScriptKeccak\n                )\n            );\n    }\n\n    /// @notice Processes all outputs from the redemption transaction. Tries to\n    ///         identify output as a change output, pending redemption request\n    //          or reported redemption. Reverts if one of the outputs cannot be\n    ///         recognized properly. Marks each request as processed by removing\n    ///         them from `pendingRedemptions` mapping.\n    /// @param redemptionTxOutputVector Bitcoin redemption transaction output\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVout` function\n    ///        before it is passed here\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction.\n    /// @param processInfo RedemptionTxOutputsProcessingInfo identifying output\n    ///        starting index, the number of outputs and possible wallet change\n    ///        P2PKH and P2WPKH scripts.\n    function processRedemptionTxOutputs(\n        BridgeState.Storage storage self,\n        bytes memory redemptionTxOutputVector,\n        bytes20 walletPubKeyHash,\n        RedemptionTxOutputsProcessingInfo memory processInfo\n    ) internal returns (RedemptionTxOutputsInfo memory resultInfo) {\n        // Helper flag indicating whether there was at least one redemption\n        // output present (redemption must be either pending or reported as\n        // timed out).\n        bool redemptionPresent = false;\n\n        // Outputs processing loop.\n        for (uint256 i = 0; i < processInfo.outputsCount; i++) {\n            // TODO: Check if we can optimize gas costs by adding\n            //       `extractValueAt` and `extractHashAt` in `bitcoin-spv-sol`\n            //       in order to avoid allocating bytes in memory.\n            uint256 outputLength = redemptionTxOutputVector\n                .determineOutputLengthAt(processInfo.outputStartingIndex);\n            bytes memory output = redemptionTxOutputVector.slice(\n                processInfo.outputStartingIndex,\n                outputLength\n            );\n\n            // Extract the value from given output.\n            uint64 outputValue = output.extractValue();\n            // The output consists of an 8-byte value and a variable length\n            // script. To extract that script we slice the output starting from\n            // 9th byte until the end.\n            bytes memory outputScript = output.slice(8, output.length - 8);\n\n            if (\n                resultInfo.changeValue == 0 &&\n                (keccak256(outputScript) ==\n                    processInfo.walletP2PKHScriptKeccak ||\n                    keccak256(outputScript) ==\n                    processInfo.walletP2WPKHScriptKeccak) &&\n                outputValue > 0\n            ) {\n                // If we entered here, that means the change output with a\n                // proper non-zero value was found.\n                resultInfo.changeIndex = uint32(i);\n                resultInfo.changeValue = outputValue;\n            } else {\n                // If we entered here, that the means the given output is\n                // supposed to represent a redemption.\n                (\n                    uint64 burnableValue,\n                    uint64 treasuryFee\n                ) = processNonChangeRedemptionTxOutput(\n                        self,\n                        walletPubKeyHash,\n                        outputScript,\n                        outputValue\n                    );\n                resultInfo.totalBurnableValue += burnableValue;\n                resultInfo.totalTreasuryFee += treasuryFee;\n                redemptionPresent = true;\n            }\n\n            // Make the `outputStartingIndex` pointing to the next output by\n            // increasing it by current output's length.\n            processInfo.outputStartingIndex += outputLength;\n        }\n\n        // Protect against the cases when there is only a single change output\n        // referring back to the wallet PKH and just burning main UTXO value\n        // for transaction fees.\n        require(\n            redemptionPresent,\n            \"Redemption transaction must process at least one redemption\"\n        );\n    }\n\n    /// @notice Processes a single redemption transaction output. Tries to\n    ///         identify output as a pending redemption request or reported\n    ///         redemption timeout. Output script passed to this function must\n    ///         not be the change output. Such output needs to be identified\n    ///         separately before calling this function.\n    ///         Reverts if output is neither requested pending redemption nor\n    ///         requested and reported timed-out redemption.\n    ///         This function also marks each pending request as processed by\n    ///         removing them from `pendingRedemptions` mapping.\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction.\n    /// @param outputScript Non-change output script to be processed\n    /// @param outputValue Value of the output being processed\n    /// @return burnableValue The value burnable as a result of processing this\n    ///         single redemption output. This value needs to be summed up with\n    ///         burnable values of all other outputs to evaluate total burnable\n    ///         value for the entire redemption transaction. This value is 0\n    ///         for a timed-out redemption request.\n    /// @return treasuryFee The treasury fee from this single redemption output.\n    ///         This value needs to be summed up with treasury fees of all other\n    ///         outputs to evaluate the total treasury fee for the entire\n    ///         redemption transaction. This value is 0 for a timed-out\n    ///         redemption request.\n    function processNonChangeRedemptionTxOutput(\n        BridgeState.Storage storage self,\n        bytes20 walletPubKeyHash,\n        bytes memory outputScript,\n        uint64 outputValue\n    ) internal returns (uint64 burnableValue, uint64 treasuryFee) {\n        // This function should be called only if the given output is\n        // supposed to represent a redemption. Build the redemption key\n        // to perform that check.\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, outputScript))\n        );\n\n        if (self.pendingRedemptions[redemptionKey].requestedAt != 0) {\n            // If we entered here, that means the output was identified\n            // as a pending redemption request.\n            RedemptionRequest storage request = self.pendingRedemptions[\n                redemptionKey\n            ];\n            // Compute the request's redeemable amount as the requested\n            // amount reduced by the treasury fee. The request's\n            // minimal amount is then the redeemable amount reduced by\n            // the maximum transaction fee.\n            uint64 redeemableAmount = request.requestedAmount -\n                request.treasuryFee;\n            // Output value must fit between the request's redeemable\n            // and minimal amounts to be deemed valid.\n            require(\n                redeemableAmount - request.txMaxFee <= outputValue &&\n                    outputValue <= redeemableAmount,\n                \"Output value is not within the acceptable range of the pending request\"\n            );\n            // Add the redeemable amount to the total burnable value\n            // the Bridge will use to decrease its balance in the Bank.\n            burnableValue = redeemableAmount;\n            // Add the request's treasury fee to the total treasury fee\n            // value the Bridge will transfer to the treasury.\n            treasuryFee = request.treasuryFee;\n            // Request was properly handled so remove its redemption\n            // key from the mapping to make it reusable for further\n            // requests.\n            delete self.pendingRedemptions[redemptionKey];\n        } else {\n            // If we entered here, the output is not a redemption\n            // request but there is still a chance the given output is\n            // related to a reported timed out redemption request.\n            // If so, check if the output value matches the request\n            // amount to confirm this is an overdue request fulfillment\n            // then bypass this output and process the subsequent\n            // ones. That also means the wallet was already punished\n            // for the inactivity. Otherwise, just revert.\n            RedemptionRequest storage request = self.timedOutRedemptions[\n                redemptionKey\n            ];\n\n            require(\n                request.requestedAt != 0,\n                \"Output is a non-requested redemption\"\n            );\n\n            uint64 redeemableAmount = request.requestedAmount -\n                request.treasuryFee;\n\n            require(\n                redeemableAmount - request.txMaxFee <= outputValue &&\n                    outputValue <= redeemableAmount,\n                \"Output value is not within the acceptable range of the timed out request\"\n            );\n        }\n    }\n\n    /// @notice Notifies that there is a pending redemption request associated\n    ///         with the given wallet, that has timed out. The redemption\n    ///         request is identified by the key built as\n    ///         `keccak256(walletPubKeyHash | redeemerOutputScript)`.\n    ///         The results of calling this function:\n    ///         - the pending redemptions value for the wallet will be decreased\n    ///           by the requested amount (minus treasury fee),\n    ///         - the tokens taken from the redeemer on redemption request will\n    ///           be returned to the redeemer,\n    ///         - the request will be moved from pending redemptions to\n    ///           timed-out redemptions,\n    ///         - if the state of the wallet is `Live` or `MovingFunds`, the\n    ///           wallet operators will be slashed and the notifier will be\n    ///           rewarded,\n    ///         - if the state of wallet is `Live`, the wallet will be closed or\n    ///           marked as `MovingFunds` (depending on the presence or absence\n    ///           of the wallet's main UTXO) and the wallet will no longer be\n    ///           marked as the active wallet (if it was marked as such).\n    /// @param walletPubKeyHash 20-byte public key hash of the wallet\n    /// @param walletMembersIDs Identifiers of the wallet signing group members\n    /// @param redeemerOutputScript  The redeemer's length-prefixed output\n    ///        script (P2PKH, P2WPKH, P2SH or P2WSH)\n    /// @dev Requirements:\n    ///      - The wallet must be in the Live or MovingFunds or Terminated state\n    ///      - The redemption request identified by `walletPubKeyHash` and\n    ///        `redeemerOutputScript` must exist\n    ///      - The expression `keccak256(abi.encode(walletMembersIDs))` must\n    ///        be exactly the same as the hash stored under `membersIdsHash`\n    ///        for the given `walletID`. Those IDs are not directly stored\n    ///        in the contract for gas efficiency purposes but they can be\n    ///        read from appropriate `DkgResultSubmitted` and `DkgResultApproved`\n    ///        events of the `WalletRegistry` contract\n    ///      - The amount of time defined by `redemptionTimeout` must have\n    ///        passed since the redemption was requested (the request must be\n    ///        timed-out)\n    function notifyRedemptionTimeout(\n        BridgeState.Storage storage self,\n        bytes20 walletPubKeyHash,\n        uint32[] calldata walletMembersIDs,\n        bytes calldata redeemerOutputScript\n    ) external {\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, redeemerOutputScript))\n        );\n        Redemption.RedemptionRequest memory request = self.pendingRedemptions[\n            redemptionKey\n        ];\n\n        require(request.requestedAt > 0, \"Redemption request does not exist\");\n        require(\n            /* solhint-disable-next-line not-rely-on-time */\n            request.requestedAt + self.redemptionTimeout < block.timestamp,\n            \"Redemption request has not timed out\"\n        );\n\n        // Update the wallet's pending redemptions value\n        Wallets.Wallet storage wallet = self.registeredWallets[\n            walletPubKeyHash\n        ];\n        wallet.pendingRedemptionsValue -=\n            request.requestedAmount -\n            request.treasuryFee;\n\n        require(\n            wallet.state == Wallets.WalletState.Live ||\n                wallet.state == Wallets.WalletState.MovingFunds ||\n                wallet.state == Wallets.WalletState.Terminated,\n            \"The wallet must be in Live, MovingFunds or Terminated state\"\n        );\n\n        // It is worth noting that there is no need to check if\n        // `timedOutRedemption` mapping already contains the given redemption\n        // key. There is no possibility to re-use a key of a reported timed-out\n        // redemption because the wallet responsible for causing the timeout is\n        // moved to a state that prevents it to receive new redemption requests.\n\n        // Move the redemption from pending redemptions to timed-out redemptions\n        self.timedOutRedemptions[redemptionKey] = request;\n        delete self.pendingRedemptions[redemptionKey];\n\n        if (\n            wallet.state == Wallets.WalletState.Live ||\n            wallet.state == Wallets.WalletState.MovingFunds\n        ) {\n            // Propagate timeout consequences to the wallet\n            self.notifyWalletTimedOutRedemption(walletPubKeyHash);\n\n            // Slash the wallet operators and reward the notifier\n            self.ecdsaWalletRegistry.seize(\n                self.redemptionTimeoutSlashingAmount,\n                self.redemptionTimeoutNotifierRewardMultiplier,\n                msg.sender,\n                wallet.ecdsaWalletID,\n                walletMembersIDs\n            );\n        }\n\n        // slither-disable-next-line reentrancy-events\n        emit RedemptionTimedOut(walletPubKeyHash, redeemerOutputScript);\n\n        // Return the requested amount of tokens to the redeemer\n        self.bank.transferBalance(request.redeemer, request.requestedAmount);\n    }\n}\n"
+      "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\nimport {BTCUtils} from \"@keep-network/bitcoin-spv-sol/contracts/BTCUtils.sol\";\nimport {BytesLib} from \"@keep-network/bitcoin-spv-sol/contracts/BytesLib.sol\";\n\nimport \"./BitcoinTx.sol\";\nimport \"./BridgeState.sol\";\nimport \"./Wallets.sol\";\n\nimport \"../bank/Bank.sol\";\n\n/// @notice Aggregates functions common to the redemption transaction proof\n///         validation and to the moving funds transaction proof validation.\nlibrary OutboundTx {\n    using BTCUtils for bytes;\n\n    /// @notice Checks whether an outbound Bitcoin transaction performed from\n    ///         the given wallet has an input vector that contains a single\n    ///         input referring to the wallet's main UTXO. Marks that main UTXO\n    ///         as correctly spent if the validation succeeds. Reverts otherwise.\n    ///         There are two outbound transactions from a wallet possible: a\n    ///         redemption transaction or a moving funds to another wallet\n    ///         transaction.\n    /// @param walletOutboundTxInputVector Bitcoin outbound transaction's input\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVin` function\n    ///        before it is passed here\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain.\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the outbound transaction.\n    function processWalletOutboundTxInput(\n        BridgeState.Storage storage self,\n        bytes memory walletOutboundTxInputVector,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes20 walletPubKeyHash\n    ) internal {\n        // Assert that main UTXO for passed wallet exists in storage.\n        bytes32 mainUtxoHash = self\n            .registeredWallets[walletPubKeyHash]\n            .mainUtxoHash;\n        require(mainUtxoHash != bytes32(0), \"No main UTXO for given wallet\");\n\n        // Assert that passed main UTXO parameter is the same as in storage and\n        // can be used for further processing.\n        require(\n            keccak256(\n                abi.encodePacked(\n                    mainUtxo.txHash,\n                    mainUtxo.txOutputIndex,\n                    mainUtxo.txOutputValue\n                )\n            ) == mainUtxoHash,\n            \"Invalid main UTXO data\"\n        );\n\n        // Assert that the single outbound transaction input actually\n        // refers to the wallet's main UTXO.\n        (\n            bytes32 outpointTxHash,\n            uint32 outpointIndex\n        ) = parseWalletOutboundTxInput(walletOutboundTxInputVector);\n        require(\n            mainUtxo.txHash == outpointTxHash &&\n                mainUtxo.txOutputIndex == outpointIndex,\n            \"Outbound transaction input must point to the wallet's main UTXO\"\n        );\n\n        // Main UTXO used as an input, mark it as spent.\n        self.spentMainUTXOs[\n            uint256(\n                keccak256(\n                    abi.encodePacked(mainUtxo.txHash, mainUtxo.txOutputIndex)\n                )\n            )\n        ] = true;\n    }\n\n    /// @notice Parses the input vector of an outbound Bitcoin transaction\n    ///         performed from the given wallet. It extracts the single input\n    ///         then the transaction hash and output index from its outpoint.\n    ///         There are two outbound transactions from a wallet possible: a\n    ///         redemption transaction or a moving funds to another wallet\n    ///         transaction.\n    /// @param walletOutboundTxInputVector Bitcoin outbound transaction input\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVin` function\n    ///        before it is passed here\n    /// @return outpointTxHash 32-byte hash of the Bitcoin transaction which is\n    ///         pointed in the input's outpoint.\n    /// @return outpointIndex 4-byte index of the Bitcoin transaction output\n    ///         which is pointed in the input's outpoint.\n    function parseWalletOutboundTxInput(\n        bytes memory walletOutboundTxInputVector\n    ) internal pure returns (bytes32 outpointTxHash, uint32 outpointIndex) {\n        // To determine the total number of Bitcoin transaction inputs,\n        // we need to parse the compactSize uint (VarInt) the input vector is\n        // prepended by. That compactSize uint encodes the number of vector\n        // elements using the format presented in:\n        // https://developer.bitcoin.org/reference/transactions.html#compactsize-unsigned-integers\n        // We don't need asserting the compactSize uint is parseable since it\n        // was already checked during `validateVin` validation.\n        // See `BitcoinTx.inputVector` docs for more details.\n        (, uint256 inputsCount) = walletOutboundTxInputVector.parseVarInt();\n        require(\n            inputsCount == 1,\n            \"Outbound transaction must have a single input\"\n        );\n\n        bytes memory input = walletOutboundTxInputVector.extractInputAtIndex(0);\n\n        outpointTxHash = input.extractInputTxIdLE();\n\n        outpointIndex = BTCUtils.reverseUint32(\n            uint32(input.extractTxIndexLE())\n        );\n\n        // There is only one input in the transaction. Input has an outpoint\n        // field that is a reference to the transaction being spent (see\n        // `BitcoinTx` docs). The outpoint contains the hash of the transaction\n        // to spend (`outpointTxHash`) and the index of the specific output\n        // from that transaction (`outpointIndex`).\n        return (outpointTxHash, outpointIndex);\n    }\n}\n\n/// @title Bridge redemption\n/// @notice The library handles the logic for redeeming Bitcoin balances from\n///         the Bridge.\n/// @dev To initiate a redemption, a user with a Bank balance supplies\n///      a Bitcoin address. Then, the system calculates the redemption fee, and\n///      releases balance to the provided Bitcoin address. Just like in case of\n///      sweeps of revealed deposits, redemption requests are processed in\n///      batches and require SPV proof to be submitted to the Bridge.\nlibrary Redemption {\n    using BridgeState for BridgeState.Storage;\n    using Wallets for BridgeState.Storage;\n    using BitcoinTx for BridgeState.Storage;\n\n    using BTCUtils for bytes;\n    using BytesLib for bytes;\n\n    /// @notice Represents a redemption request.\n    struct RedemptionRequest {\n        // ETH address of the redeemer who created the request.\n        address redeemer;\n        // Requested TBTC amount in satoshi.\n        uint64 requestedAmount;\n        // Treasury TBTC fee in satoshi at the moment of request creation.\n        uint64 treasuryFee;\n        // Transaction maximum BTC fee in satoshi at the moment of request\n        // creation.\n        uint64 txMaxFee;\n        // UNIX timestamp the request was created at.\n        uint32 requestedAt;\n        // This struct doesn't contain `__gap` property as the structure is stored\n        // in a mapping, mappings store values in different slots and they are\n        // not contiguous with other values.\n    }\n\n    /// @notice Represents an outcome of the redemption Bitcoin transaction\n    ///         outputs processing.\n    struct RedemptionTxOutputsInfo {\n        // Total TBTC value in satoshi that should be burned by the Bridge.\n        // It includes the total amount of all BTC redeemed in the transaction\n        // and the fee paid to BTC miners for the redemption transaction.\n        uint64 totalBurnableValue;\n        // Total TBTC value in satoshi that should be transferred to\n        // the treasury. It is a sum of all treasury fees paid by all\n        // redeemers included in the redemption transaction.\n        uint64 totalTreasuryFee;\n        // Index of the change output. The change output becomes\n        // the new main wallet's UTXO.\n        uint32 changeIndex;\n        // Value in satoshi of the change output.\n        uint64 changeValue;\n        // This struct doesn't contain `__gap` property as the structure is not\n        // stored, it is used as a function's memory argument.\n    }\n\n    /// @notice Represents temporary information needed during the processing of\n    ///         the redemption Bitcoin transaction outputs. This structure is an\n    ///         internal one and should not be exported outside of the redemption\n    ///         transaction processing code.\n    /// @dev Allows to mitigate \"stack too deep\" errors on EVM.\n    struct RedemptionTxOutputsProcessingInfo {\n        // The first output starting index in the transaction.\n        uint256 outputStartingIndex;\n        // The number of outputs in the transaction.\n        uint256 outputsCount;\n        // P2PKH script for the wallet. Needed to determine the change output.\n        bytes32 walletP2PKHScriptKeccak;\n        // P2WPKH script for the wallet. Needed to determine the change output.\n        bytes32 walletP2WPKHScriptKeccak;\n        // This struct doesn't contain `__gap` property as the structure is not\n        // stored, it is used as a function's memory argument.\n    }\n\n    event RedemptionRequested(\n        bytes20 indexed walletPubKeyHash,\n        bytes redeemerOutputScript,\n        address indexed redeemer,\n        uint64 requestedAmount,\n        uint64 treasuryFee,\n        uint64 txMaxFee\n    );\n\n    event RedemptionsCompleted(\n        bytes20 indexed walletPubKeyHash,\n        bytes32 redemptionTxHash\n    );\n\n    event RedemptionTimedOut(\n        bytes20 indexed walletPubKeyHash,\n        bytes redeemerOutputScript\n    );\n\n    /// @notice Requests redemption of the given amount from the specified\n    ///         wallet to the redeemer Bitcoin output script.\n    /// @param walletPubKeyHash The 20-byte wallet public key hash (computed\n    ///        using Bitcoin HASH160 over the compressed ECDSA public key)\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain\n    /// @param redeemerOutputScript The redeemer's length-prefixed output\n    ///        script (P2PKH, P2WPKH, P2SH or P2WSH) that will be used to lock\n    ///        redeemed BTC\n    /// @param amount Requested amount in satoshi. This is also the TBTC amount\n    ///        that is taken from redeemer's balance in the Bank upon request.\n    ///        Once the request is handled, the actual amount of BTC locked\n    ///        on the redeemer output script will be always lower than this value\n    ///        since the treasury and Bitcoin transaction fees must be incurred.\n    ///        The minimal amount satisfying the request can be computed as:\n    ///        `amount - (amount / redemptionTreasuryFeeDivisor) - redemptionTxMaxFee`.\n    ///        Fees values are taken at the moment of request creation.\n    /// @dev Requirements:\n    ///      - Wallet behind `walletPubKeyHash` must be live\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///      - `redeemerOutputScript` must be a proper Bitcoin script\n    ///      - `redeemerOutputScript` cannot have wallet PKH as payload\n    ///      - `amount` must be above or equal the `redemptionDustThreshold`\n    ///      - Given `walletPubKeyHash` and `redeemerOutputScript` pair can be\n    ///        used for only one pending request at the same time\n    ///      - Wallet must have enough Bitcoin balance to proceed the request\n    ///      - Redeemer must make an allowance in the Bank that the Bridge\n    ///        contract can spend the given `amount`.\n    function requestRedemption(\n        BridgeState.Storage storage self,\n        bytes20 walletPubKeyHash,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes calldata redeemerOutputScript,\n        uint64 amount\n    ) external {\n        Wallets.Wallet storage wallet = self.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        require(\n            wallet.state == Wallets.WalletState.Live,\n            \"Wallet must be in Live state\"\n        );\n\n        bytes32 mainUtxoHash = wallet.mainUtxoHash;\n        require(\n            mainUtxoHash != bytes32(0),\n            \"No main UTXO for the given wallet\"\n        );\n        require(\n            keccak256(\n                abi.encodePacked(\n                    mainUtxo.txHash,\n                    mainUtxo.txOutputIndex,\n                    mainUtxo.txOutputValue\n                )\n            ) == mainUtxoHash,\n            \"Invalid main UTXO data\"\n        );\n\n        // Validate if redeemer output script is a correct standard type\n        // (P2PKH, P2WPKH, P2SH or P2WSH). This is done by building a stub\n        // output with 0 as value and using `BTCUtils.extractHash` on it. Such\n        // a function extracts the payload properly only from standard outputs\n        // so if it succeeds, we have a guarantee the redeemer output script\n        // is proper. Worth to note `extractHash` ignores the value at all\n        // so this is why we can use 0 safely. This way of validation is the\n        // same as in tBTC v1.\n        bytes memory redeemerOutputScriptPayload = abi\n            .encodePacked(bytes8(0), redeemerOutputScript)\n            .extractHash();\n        require(\n            redeemerOutputScriptPayload.length > 0,\n            \"Redeemer output script must be a standard type\"\n        );\n        // Check if the redeemer output script payload does not point to the\n        // wallet public key hash.\n        require(\n            keccak256(abi.encodePacked(walletPubKeyHash)) !=\n                keccak256(redeemerOutputScriptPayload),\n            \"Redeemer output script must not point to the wallet PKH\"\n        );\n\n        require(\n            amount >= self.redemptionDustThreshold,\n            \"Redemption amount too small\"\n        );\n\n        // The redemption key is built on top of the wallet public key hash\n        // and redeemer output script pair. That means there can be only one\n        // request asking for redemption from the given wallet to the given\n        // BTC script at the same time.\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, redeemerOutputScript))\n        );\n\n        // Check if given redemption key is not used by a pending redemption.\n        // There is no need to check for existence in `timedOutRedemptions`\n        // since the wallet's state is changed to other than Live after\n        // first time out is reported so making new requests is not possible.\n        // slither-disable-next-line incorrect-equality\n        require(\n            self.pendingRedemptions[redemptionKey].requestedAt == 0,\n            \"There is a pending redemption request from this wallet to the same address\"\n        );\n\n        // No need to check whether `amount - treasuryFee - txMaxFee > 0`\n        // since the `redemptionDustThreshold` should force that condition\n        // to be always true.\n        uint64 treasuryFee = self.redemptionTreasuryFeeDivisor > 0\n            ? amount / self.redemptionTreasuryFeeDivisor\n            : 0;\n        uint64 txMaxFee = self.redemptionTxMaxFee;\n\n        // The main wallet UTXO's value doesn't include all pending redemptions.\n        // To determine if the requested redemption can be performed by the\n        // wallet we need to subtract the total value of all pending redemptions\n        // from that wallet's main UTXO value. Given that the treasury fee is\n        // not redeemed from the wallet, we are subtracting it.\n        wallet.pendingRedemptionsValue += amount - treasuryFee;\n        require(\n            mainUtxo.txOutputValue >= wallet.pendingRedemptionsValue,\n            \"Insufficient wallet funds\"\n        );\n\n        self.pendingRedemptions[redemptionKey] = RedemptionRequest(\n            msg.sender,\n            amount,\n            treasuryFee,\n            txMaxFee,\n            /* solhint-disable-next-line not-rely-on-time */\n            uint32(block.timestamp)\n        );\n\n        emit RedemptionRequested(\n            walletPubKeyHash,\n            redeemerOutputScript,\n            msg.sender,\n            amount,\n            treasuryFee,\n            txMaxFee\n        );\n\n        self.bank.transferBalanceFrom(msg.sender, address(this), amount);\n    }\n\n    /// @notice Used by the wallet to prove the BTC redemption transaction\n    ///         and to make the necessary bookkeeping. Redemption is only\n    ///         accepted if it satisfies SPV proof.\n    ///\n    ///         The function is performing Bank balance updates by burning\n    ///         the total redeemed Bitcoin amount from Bridge balance and\n    ///         transferring the treasury fee sum to the treasury address.\n    ///\n    ///         It is possible to prove the given redemption only one time.\n    /// @param redemptionTx Bitcoin redemption transaction data\n    /// @param redemptionProof Bitcoin redemption proof data\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    ///        HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction\n    /// @dev Requirements:\n    ///      - `redemptionTx` components must match the expected structure. See\n    ///        `BitcoinTx.Info` docs for reference. Their values must exactly\n    ///        correspond to appropriate Bitcoin transaction fields to produce\n    ///        a provable transaction hash.\n    ///      - The `redemptionTx` should represent a Bitcoin transaction with\n    ///        exactly 1 input that refers to the wallet's main UTXO. That\n    ///        transaction should have 1..n outputs handling existing pending\n    ///        redemption requests or pointing to reported timed out requests.\n    ///        There can be also 1 optional output representing the\n    ///        change and pointing back to the 20-byte wallet public key hash.\n    ///        The change should be always present if the redeemed value sum\n    ///        is lower than the total wallet's BTC balance.\n    ///      - `redemptionProof` components must match the expected structure.\n    ///        See `BitcoinTx.Proof` docs for reference. The `bitcoinHeaders`\n    ///        field must contain a valid number of block headers, not less\n    ///        than the `txProofDifficultyFactor` contract constant.\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///        Additionally, the recent main UTXO on Ethereum must be set.\n    ///      - `walletPubKeyHash` must be connected with the main UTXO used\n    ///        as transaction single input.\n    ///      Other remarks:\n    ///      - Putting the change output as the first transaction output can\n    ///        save some gas because the output processing loop begins each\n    ///        iteration by checking whether the given output is the change\n    ///        thus uses some gas for making the comparison. Once the change\n    ///        is identified, that check is omitted in further iterations.\n    function submitRedemptionProof(\n        BridgeState.Storage storage self,\n        BitcoinTx.Info calldata redemptionTx,\n        BitcoinTx.Proof calldata redemptionProof,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes20 walletPubKeyHash\n    ) external {\n        // The actual transaction proof is performed here. After that point, we\n        // can assume the transaction happened on Bitcoin chain and has\n        // a sufficient number of confirmations as determined by\n        // `txProofDifficultyFactor` constant.\n        bytes32 redemptionTxHash = self.validateProof(\n            redemptionTx,\n            redemptionProof\n        );\n\n        // Process the redemption transaction input. Specifically, check if it\n        // refers to the expected wallet's main UTXO.\n        OutboundTx.processWalletOutboundTxInput(\n            self,\n            redemptionTx.inputVector,\n            mainUtxo,\n            walletPubKeyHash\n        );\n\n        Wallets.Wallet storage wallet = self.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        Wallets.WalletState walletState = wallet.state;\n        require(\n            walletState == Wallets.WalletState.Live ||\n                walletState == Wallets.WalletState.MovingFunds,\n            \"Wallet must be in Live or MovingFunds state\"\n        );\n\n        // Process redemption transaction outputs to extract some info required\n        // for further processing.\n        RedemptionTxOutputsInfo memory outputsInfo = processRedemptionTxOutputs(\n            self,\n            redemptionTx.outputVector,\n            walletPubKeyHash\n        );\n\n        if (outputsInfo.changeValue > 0) {\n            // If the change value is grater than zero, it means the change\n            // output exists and can be used as new wallet's main UTXO.\n            wallet.mainUtxoHash = keccak256(\n                abi.encodePacked(\n                    redemptionTxHash,\n                    outputsInfo.changeIndex,\n                    outputsInfo.changeValue\n                )\n            );\n        } else {\n            // If the change value is zero, it means the change output doesn't\n            // exists and no funds left on the wallet. Delete the main UTXO\n            // for that wallet to represent that state in a proper way.\n            delete wallet.mainUtxoHash;\n        }\n\n        wallet.pendingRedemptionsValue -= outputsInfo.totalBurnableValue;\n\n        emit RedemptionsCompleted(walletPubKeyHash, redemptionTxHash);\n\n        self.bank.decreaseBalance(outputsInfo.totalBurnableValue);\n        self.bank.transferBalance(self.treasury, outputsInfo.totalTreasuryFee);\n    }\n\n    /// @notice Processes the Bitcoin redemption transaction output vector.\n    ///         It extracts each output and tries to identify it as a pending\n    ///         redemption request, reported timed out request, or change.\n    ///         Reverts if one of the outputs cannot be recognized properly.\n    ///         This function also marks each request as processed by removing\n    ///         them from `pendingRedemptions` mapping.\n    /// @param redemptionTxOutputVector Bitcoin redemption transaction output\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVout` function\n    ///        before it is passed here\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction.\n    /// @return info Outcomes of the processing.\n    function processRedemptionTxOutputs(\n        BridgeState.Storage storage self,\n        bytes memory redemptionTxOutputVector,\n        bytes20 walletPubKeyHash\n    ) internal returns (RedemptionTxOutputsInfo memory info) {\n        // Determining the total number of redemption transaction outputs in\n        // the same way as for number of inputs. See `BitcoinTx.outputVector`\n        // docs for more details.\n        (\n            uint256 outputsCompactSizeUintLength,\n            uint256 outputsCount\n        ) = redemptionTxOutputVector.parseVarInt();\n\n        // To determine the first output starting index, we must jump over\n        // the compactSize uint which prepends the output vector. One byte\n        // must be added because `BtcUtils.parseVarInt` does not include\n        // compactSize uint tag in the returned length.\n        //\n        // For >= 0 && <= 252, `BTCUtils.determineVarIntDataLengthAt`\n        // returns `0`, so we jump over one byte of compactSize uint.\n        //\n        // For >= 253 && <= 0xffff there is `0xfd` tag,\n        // `BTCUtils.determineVarIntDataLengthAt` returns `2` (no\n        // tag byte included) so we need to jump over 1+2 bytes of\n        // compactSize uint.\n        //\n        // Please refer `BTCUtils` library and compactSize uint\n        // docs in `BitcoinTx` library for more details.\n        uint256 outputStartingIndex = 1 + outputsCompactSizeUintLength;\n\n        // Calculate the keccak256 for two possible wallet's P2PKH or P2WPKH\n        // scripts that can be used to lock the change. This is done upfront to\n        // save on gas. Both scripts have a strict format defined by Bitcoin.\n        //\n        // The P2PKH script has the byte format: <0x1976a914> <20-byte PKH> <0x88ac>.\n        // According to https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n        // - 0x19: Byte length of the entire script\n        // - 0x76: OP_DUP\n        // - 0xa9: OP_HASH160\n        // - 0x14: Byte length of the public key hash\n        // - 0x88: OP_EQUALVERIFY\n        // - 0xac: OP_CHECKSIG\n        // which matches the P2PKH structure as per:\n        // https://en.bitcoin.it/wiki/Transaction#Pay-to-PubkeyHash\n        bytes32 walletP2PKHScriptKeccak = keccak256(\n            abi.encodePacked(hex\"1976a914\", walletPubKeyHash, hex\"88ac\")\n        );\n        // The P2WPKH script has the byte format: <0x160014> <20-byte PKH>.\n        // According to https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n        // - 0x16: Byte length of the entire script\n        // - 0x00: OP_0\n        // - 0x14: Byte length of the public key hash\n        // which matches the P2WPKH structure as per:\n        // https://github.com/bitcoin/bips/blob/master/bip-0141.mediawiki#P2WPKH\n        bytes32 walletP2WPKHScriptKeccak = keccak256(\n            abi.encodePacked(hex\"160014\", walletPubKeyHash)\n        );\n\n        return\n            processRedemptionTxOutputs(\n                self,\n                redemptionTxOutputVector,\n                walletPubKeyHash,\n                RedemptionTxOutputsProcessingInfo(\n                    outputStartingIndex,\n                    outputsCount,\n                    walletP2PKHScriptKeccak,\n                    walletP2WPKHScriptKeccak\n                )\n            );\n    }\n\n    /// @notice Processes all outputs from the redemption transaction. Tries to\n    ///         identify output as a change output, pending redemption request\n    //          or reported redemption. Reverts if one of the outputs cannot be\n    ///         recognized properly. Marks each request as processed by removing\n    ///         them from `pendingRedemptions` mapping.\n    /// @param redemptionTxOutputVector Bitcoin redemption transaction output\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVout` function\n    ///        before it is passed here\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction.\n    /// @param processInfo RedemptionTxOutputsProcessingInfo identifying output\n    ///        starting index, the number of outputs and possible wallet change\n    ///        P2PKH and P2WPKH scripts.\n    function processRedemptionTxOutputs(\n        BridgeState.Storage storage self,\n        bytes memory redemptionTxOutputVector,\n        bytes20 walletPubKeyHash,\n        RedemptionTxOutputsProcessingInfo memory processInfo\n    ) internal returns (RedemptionTxOutputsInfo memory resultInfo) {\n        // Helper flag indicating whether there was at least one redemption\n        // output present (redemption must be either pending or reported as\n        // timed out).\n        bool redemptionPresent = false;\n\n        // Outputs processing loop.\n        for (uint256 i = 0; i < processInfo.outputsCount; i++) {\n            // TODO: Check if we can optimize gas costs by adding\n            //       `extractValueAt` and `extractHashAt` in `bitcoin-spv-sol`\n            //       in order to avoid allocating bytes in memory.\n            uint256 outputLength = redemptionTxOutputVector\n                .determineOutputLengthAt(processInfo.outputStartingIndex);\n            bytes memory output = redemptionTxOutputVector.slice(\n                processInfo.outputStartingIndex,\n                outputLength\n            );\n\n            // Extract the value from given output.\n            uint64 outputValue = output.extractValue();\n            // The output consists of an 8-byte value and a variable length\n            // script. To extract that script we slice the output starting from\n            // 9th byte until the end.\n            bytes memory outputScript = output.slice(8, output.length - 8);\n\n            if (\n                resultInfo.changeValue == 0 &&\n                (keccak256(outputScript) ==\n                    processInfo.walletP2PKHScriptKeccak ||\n                    keccak256(outputScript) ==\n                    processInfo.walletP2WPKHScriptKeccak) &&\n                outputValue > 0\n            ) {\n                // If we entered here, that means the change output with a\n                // proper non-zero value was found.\n                resultInfo.changeIndex = uint32(i);\n                resultInfo.changeValue = outputValue;\n            } else {\n                // If we entered here, that the means the given output is\n                // supposed to represent a redemption.\n                (\n                    uint64 burnableValue,\n                    uint64 treasuryFee\n                ) = processNonChangeRedemptionTxOutput(\n                        self,\n                        walletPubKeyHash,\n                        outputScript,\n                        outputValue\n                    );\n                resultInfo.totalBurnableValue += burnableValue;\n                resultInfo.totalTreasuryFee += treasuryFee;\n                redemptionPresent = true;\n            }\n\n            // Make the `outputStartingIndex` pointing to the next output by\n            // increasing it by current output's length.\n            processInfo.outputStartingIndex += outputLength;\n        }\n\n        // Protect against the cases when there is only a single change output\n        // referring back to the wallet PKH and just burning main UTXO value\n        // for transaction fees.\n        require(\n            redemptionPresent,\n            \"Redemption transaction must process at least one redemption\"\n        );\n    }\n\n    /// @notice Processes a single redemption transaction output. Tries to\n    ///         identify output as a pending redemption request or reported\n    ///         redemption timeout. Output script passed to this function must\n    ///         not be the change output. Such output needs to be identified\n    ///         separately before calling this function.\n    ///         Reverts if output is neither requested pending redemption nor\n    ///         requested and reported timed-out redemption.\n    ///         This function also marks each pending request as processed by\n    ///         removing them from `pendingRedemptions` mapping.\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction.\n    /// @param outputScript Non-change output script to be processed\n    /// @param outputValue Value of the output being processed\n    /// @return burnableValue The value burnable as a result of processing this\n    ///         single redemption output. This value needs to be summed up with\n    ///         burnable values of all other outputs to evaluate total burnable\n    ///         value for the entire redemption transaction. This value is 0\n    ///         for a timed-out redemption request.\n    /// @return treasuryFee The treasury fee from this single redemption output.\n    ///         This value needs to be summed up with treasury fees of all other\n    ///         outputs to evaluate the total treasury fee for the entire\n    ///         redemption transaction. This value is 0 for a timed-out\n    ///         redemption request.\n    function processNonChangeRedemptionTxOutput(\n        BridgeState.Storage storage self,\n        bytes20 walletPubKeyHash,\n        bytes memory outputScript,\n        uint64 outputValue\n    ) internal returns (uint64 burnableValue, uint64 treasuryFee) {\n        // This function should be called only if the given output is\n        // supposed to represent a redemption. Build the redemption key\n        // to perform that check.\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, outputScript))\n        );\n\n        if (self.pendingRedemptions[redemptionKey].requestedAt != 0) {\n            // If we entered here, that means the output was identified\n            // as a pending redemption request.\n            RedemptionRequest storage request = self.pendingRedemptions[\n                redemptionKey\n            ];\n            // Compute the request's redeemable amount as the requested\n            // amount reduced by the treasury fee. The request's\n            // minimal amount is then the redeemable amount reduced by\n            // the maximum transaction fee.\n            uint64 redeemableAmount = request.requestedAmount -\n                request.treasuryFee;\n            // Output value must fit between the request's redeemable\n            // and minimal amounts to be deemed valid.\n            require(\n                redeemableAmount - request.txMaxFee <= outputValue &&\n                    outputValue <= redeemableAmount,\n                \"Output value is not within the acceptable range of the pending request\"\n            );\n            // Add the redeemable amount to the total burnable value\n            // the Bridge will use to decrease its balance in the Bank.\n            burnableValue = redeemableAmount;\n            // Add the request's treasury fee to the total treasury fee\n            // value the Bridge will transfer to the treasury.\n            treasuryFee = request.treasuryFee;\n            // Request was properly handled so remove its redemption\n            // key from the mapping to make it reusable for further\n            // requests.\n            delete self.pendingRedemptions[redemptionKey];\n        } else {\n            // If we entered here, the output is not a redemption\n            // request but there is still a chance the given output is\n            // related to a reported timed out redemption request.\n            // If so, check if the output value matches the request\n            // amount to confirm this is an overdue request fulfillment\n            // then bypass this output and process the subsequent\n            // ones. That also means the wallet was already punished\n            // for the inactivity. Otherwise, just revert.\n            RedemptionRequest storage request = self.timedOutRedemptions[\n                redemptionKey\n            ];\n\n            require(\n                request.requestedAt != 0,\n                \"Output is a non-requested redemption\"\n            );\n\n            uint64 redeemableAmount = request.requestedAmount -\n                request.treasuryFee;\n\n            require(\n                redeemableAmount - request.txMaxFee <= outputValue &&\n                    outputValue <= redeemableAmount,\n                \"Output value is not within the acceptable range of the timed out request\"\n            );\n        }\n    }\n\n    /// @notice Notifies that there is a pending redemption request associated\n    ///         with the given wallet, that has timed out. The redemption\n    ///         request is identified by the key built as\n    ///         `keccak256(walletPubKeyHash | redeemerOutputScript)`.\n    ///         The results of calling this function:\n    ///         - the pending redemptions value for the wallet will be decreased\n    ///           by the requested amount (minus treasury fee),\n    ///         - the tokens taken from the redeemer on redemption request will\n    ///           be returned to the redeemer,\n    ///         - the request will be moved from pending redemptions to\n    ///           timed-out redemptions,\n    ///         - if the state of the wallet is `Live` or `MovingFunds`, the\n    ///           wallet operators will be slashed and the notifier will be\n    ///           rewarded,\n    ///         - if the state of wallet is `Live`, the wallet will be closed or\n    ///           marked as `MovingFunds` (depending on the presence or absence\n    ///           of the wallet's main UTXO) and the wallet will no longer be\n    ///           marked as the active wallet (if it was marked as such).\n    /// @param walletPubKeyHash 20-byte public key hash of the wallet\n    /// @param walletMembersIDs Identifiers of the wallet signing group members\n    /// @param redeemerOutputScript  The redeemer's length-prefixed output\n    ///        script (P2PKH, P2WPKH, P2SH or P2WSH)\n    /// @dev Requirements:\n    ///      - The wallet must be in the Live or MovingFunds or Terminated state\n    ///      - The redemption request identified by `walletPubKeyHash` and\n    ///        `redeemerOutputScript` must exist\n    ///      - The expression `keccak256(abi.encode(walletMembersIDs))` must\n    ///        be exactly the same as the hash stored under `membersIdsHash`\n    ///        for the given `walletID`. Those IDs are not directly stored\n    ///        in the contract for gas efficiency purposes but they can be\n    ///        read from appropriate `DkgResultSubmitted` and `DkgResultApproved`\n    ///        events of the `WalletRegistry` contract\n    ///      - The amount of time defined by `redemptionTimeout` must have\n    ///        passed since the redemption was requested (the request must be\n    ///        timed-out)\n    function notifyRedemptionTimeout(\n        BridgeState.Storage storage self,\n        bytes20 walletPubKeyHash,\n        uint32[] calldata walletMembersIDs,\n        bytes calldata redeemerOutputScript\n    ) external {\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, redeemerOutputScript))\n        );\n        Redemption.RedemptionRequest memory request = self.pendingRedemptions[\n            redemptionKey\n        ];\n\n        require(request.requestedAt > 0, \"Redemption request does not exist\");\n        require(\n            /* solhint-disable-next-line not-rely-on-time */\n            request.requestedAt + self.redemptionTimeout < block.timestamp,\n            \"Redemption request has not timed out\"\n        );\n\n        // Update the wallet's pending redemptions value\n        Wallets.Wallet storage wallet = self.registeredWallets[\n            walletPubKeyHash\n        ];\n        wallet.pendingRedemptionsValue -=\n            request.requestedAmount -\n            request.treasuryFee;\n\n        require(\n            wallet.state == Wallets.WalletState.Live ||\n                wallet.state == Wallets.WalletState.MovingFunds ||\n                wallet.state == Wallets.WalletState.Terminated,\n            \"The wallet must be in Live, MovingFunds or Terminated state\"\n        );\n\n        // It is worth noting that there is no need to check if\n        // `timedOutRedemption` mapping already contains the given redemption\n        // key. There is no possibility to re-use a key of a reported timed-out\n        // redemption because the wallet responsible for causing the timeout is\n        // moved to a state that prevents it to receive new redemption requests.\n\n        // Move the redemption from pending redemptions to timed-out redemptions\n        self.timedOutRedemptions[redemptionKey] = request;\n        delete self.pendingRedemptions[redemptionKey];\n\n        if (\n            wallet.state == Wallets.WalletState.Live ||\n            wallet.state == Wallets.WalletState.MovingFunds\n        ) {\n            // Propagate timeout consequences to the wallet\n            self.notifyWalletTimedOutRedemption(walletPubKeyHash);\n\n            // Slash the wallet operators and reward the notifier\n            self.ecdsaWalletRegistry.seize(\n                self.redemptionTimeoutSlashingAmount,\n                self.redemptionTimeoutNotifierRewardMultiplier,\n                msg.sender,\n                wallet.ecdsaWalletID,\n                walletMembersIDs\n            );\n        }\n\n        // slither-disable-next-line reentrancy-events\n        emit RedemptionTimedOut(walletPubKeyHash, redeemerOutputScript);\n\n        // Return the requested amount of tokens to the redeemer\n        self.bank.transferBalance(request.redeemer, request.requestedAmount);\n    }\n}\n"
     },
     "contracts/bridge/Fraud.sol": {
       "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\nimport {BytesLib} from \"@keep-network/bitcoin-spv-sol/contracts/BytesLib.sol\";\nimport {BTCUtils} from \"@keep-network/bitcoin-spv-sol/contracts/BTCUtils.sol\";\nimport {CheckBitcoinSigs} from \"@keep-network/bitcoin-spv-sol/contracts/CheckBitcoinSigs.sol\";\n\nimport \"./BitcoinTx.sol\";\nimport \"./EcdsaLib.sol\";\nimport \"./BridgeState.sol\";\nimport \"./Heartbeat.sol\";\nimport \"./MovingFunds.sol\";\nimport \"./Wallets.sol\";\n\n/// @title Bridge fraud\n/// @notice The library handles the logic for challenging Bridge wallets that\n///         committed fraud.\n/// @dev Anyone can submit a fraud challenge indicating that a UTXO being under\n///      the wallet control was unlocked by the wallet but was not used\n///      according to the protocol rules. That means the wallet signed\n///      a transaction input pointing to that UTXO and there is a unique\n///      sighash and signature pair associated with that input.\n///\n///      In order to defeat the challenge, the same wallet public key and\n///      signature must be provided as were used to calculate the sighash during\n///      the challenge. The wallet provides the preimage which produces sighash\n///      used to generate the ECDSA signature that is the subject of the fraud\n///      claim.\n///\n///      The fraud challenge defeat attempt will succeed if the inputs in the\n///      preimage are considered honestly spent by the wallet. Therefore the\n///      transaction spending the UTXO must be proven in the Bridge before\n///      a challenge defeat is called.\n///\n///      Another option is when a malicious wallet member used a signed heartbeat\n///      message periodically produced by the wallet off-chain to challenge the\n///      wallet for a fraud. Anyone from the wallet can defeat the challenge by\n///      proving the sighash and signature were produced for a heartbeat message\n///      following a strict format.\nlibrary Fraud {\n    using Wallets for BridgeState.Storage;\n\n    using BytesLib for bytes;\n    using BTCUtils for bytes;\n    using BTCUtils for uint32;\n    using EcdsaLib for bytes;\n\n    struct FraudChallenge {\n        // The address of the party challenging the wallet.\n        address challenger;\n        // The amount of ETH the challenger deposited.\n        uint256 depositAmount;\n        // The timestamp the challenge was submitted at.\n        uint32 reportedAt;\n        // The flag indicating whether the challenge has been resolved.\n        bool resolved;\n        // This struct doesn't contain `__gap` property as the structure is stored\n        // in a mapping, mappings store values in different slots and they are\n        // not contiguous with other values.\n    }\n\n    event FraudChallengeSubmitted(\n        bytes20 indexed walletPubKeyHash,\n        bytes32 sighash,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    );\n\n    event FraudChallengeDefeated(\n        bytes20 indexed walletPubKeyHash,\n        bytes32 sighash\n    );\n\n    event FraudChallengeDefeatTimedOut(\n        bytes20 indexed walletPubKeyHash,\n        // Sighash calculated as a Bitcoin's hash256 (double sha2) of:\n        // - a preimage of a transaction spending UTXO according to the protocol\n        //   rules OR\n        // - a valid heartbeat message produced by the wallet off-chain.\n        bytes32 sighash\n    );\n\n    /// @notice Submits a fraud challenge indicating that a UTXO being under\n    ///         wallet control was unlocked by the wallet but was not used\n    ///         according to the protocol rules. That means the wallet signed\n    ///         a transaction input pointing to that UTXO and there is a unique\n    ///         sighash and signature pair associated with that input. This\n    ///         function uses those parameters to create a fraud accusation that\n    ///         proves a given transaction input unlocking the given UTXO was\n    ///         actually signed by the wallet. This function cannot determine\n    ///         whether the transaction was actually broadcast and the input was\n    ///         consumed in a fraudulent way so it just opens a challenge period\n    ///         during which the wallet can defeat the challenge by submitting\n    ///         proof of a transaction that consumes the given input according\n    ///         to protocol rules. To prevent spurious allegations, the caller\n    ///         must deposit ETH that is returned back upon justified fraud\n    ///         challenge or confiscated otherwise\n    /// @param walletPublicKey The public key of the wallet in the uncompressed\n    ///        and unprefixed format (64 bytes)\n    /// @param preimageSha256 The hash that was generated by applying SHA-256\n    ///        one time over the preimage used during input signing. The preimage\n    ///        is a serialized subset of the transaction and its structure\n    ///        depends on the transaction input (see BIP-143 for reference).\n    ///        Notice that applying SHA-256 over the `preimageSha256` results\n    ///        in `sighash`.  The path from `preimage` to `sighash` looks like\n    ///        this:\n    ///        preimage -> (SHA-256) -> preimageSha256 -> (SHA-256) -> sighash\n    /// @param signature Bitcoin signature in the R/S/V format\n    /// @dev Requirements:\n    ///      - Wallet behind `walletPublicKey` must be in Live or MovingFunds\n    ///        or Closing state\n    ///      - The challenger must send appropriate amount of ETH used as\n    ///        fraud challenge deposit\n    ///      - The signature (represented by r, s and v) must be generated by\n    ///        the wallet behind `walletPubKey` during signing of `sighash`\n    ///        which was calculated from `preimageSha256`\n    ///      - Wallet can be challenged for the given signature only once\n    function submitFraudChallenge(\n        BridgeState.Storage storage self,\n        bytes calldata walletPublicKey,\n        bytes memory preimageSha256,\n        BitcoinTx.RSVSignature calldata signature\n    ) external {\n        require(\n            msg.value >= self.fraudChallengeDepositAmount,\n            \"The amount of ETH deposited is too low\"\n        );\n\n        // To prevent ECDSA signature forgery `sighash` must be calculated\n        // inside the function and not passed as a function parameter.\n        // Signature forgery could result in a wrongful fraud accusation\n        // against a wallet.\n        bytes32 sighash = sha256(preimageSha256);\n\n        require(\n            CheckBitcoinSigs.checkSig(\n                walletPublicKey,\n                sighash,\n                signature.v,\n                signature.r,\n                signature.s\n            ),\n            \"Signature verification failure\"\n        );\n\n        bytes memory compressedWalletPublicKey = EcdsaLib.compressPublicKey(\n            walletPublicKey.slice32(0),\n            walletPublicKey.slice32(32)\n        );\n        bytes20 walletPubKeyHash = compressedWalletPublicKey.hash160View();\n\n        Wallets.Wallet storage wallet = self.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        require(\n            wallet.state == Wallets.WalletState.Live ||\n                wallet.state == Wallets.WalletState.MovingFunds ||\n                wallet.state == Wallets.WalletState.Closing,\n            \"Wallet must be in Live or MovingFunds or Closing state\"\n        );\n\n        uint256 challengeKey = uint256(\n            keccak256(abi.encodePacked(walletPublicKey, sighash))\n        );\n\n        FraudChallenge storage challenge = self.fraudChallenges[challengeKey];\n        require(challenge.reportedAt == 0, \"Fraud challenge already exists\");\n\n        challenge.challenger = msg.sender;\n        challenge.depositAmount = msg.value;\n        /* solhint-disable-next-line not-rely-on-time */\n        challenge.reportedAt = uint32(block.timestamp);\n        challenge.resolved = false;\n        // slither-disable-next-line reentrancy-events\n        emit FraudChallengeSubmitted(\n            walletPubKeyHash,\n            sighash,\n            signature.v,\n            signature.r,\n            signature.s\n        );\n    }\n\n    /// @notice Allows to defeat a pending fraud challenge against a wallet if\n    ///         the transaction that spends the UTXO follows the protocol rules.\n    ///         In order to defeat the challenge the same `walletPublicKey` and\n    ///         signature (represented by `r`, `s` and `v`) must be provided as\n    ///         were used to calculate the sighash during input signing.\n    ///         The fraud challenge defeat attempt will only succeed if the\n    ///         inputs in the preimage are considered honestly spent by the\n    ///         wallet. Therefore the transaction spending the UTXO must be\n    ///         proven in the Bridge before a challenge defeat is called.\n    ///         If successfully defeated, the fraud challenge is marked as\n    ///         resolved and the amount of ether deposited by the challenger is\n    ///         sent to the treasury.\n    /// @param walletPublicKey The public key of the wallet in the uncompressed\n    ///        and unprefixed format (64 bytes)\n    /// @param preimage The preimage which produces sighash used to generate the\n    ///        ECDSA signature that is the subject of the fraud claim. It is a\n    ///        serialized subset of the transaction. The exact subset used as\n    ///        the preimage depends on the transaction input the signature is\n    ///        produced for. See BIP-143 for reference\n    /// @param witness Flag indicating whether the preimage was produced for a\n    ///        witness input. True for witness, false for non-witness input.\n    /// @dev Requirements:\n    ///      - `walletPublicKey` and `sighash` calculated as `hash256(preimage)`\n    ///        must identify an open fraud challenge\n    ///      - the preimage must be a valid preimage of a transaction generated\n    ///        according to the protocol rules and already proved in the Bridge\n    ///      - before a defeat attempt is made the transaction that spends the\n    ///        given UTXO must be proven in the Bridge\n    function defeatFraudChallenge(\n        BridgeState.Storage storage self,\n        bytes calldata walletPublicKey,\n        bytes calldata preimage,\n        bool witness\n    ) external {\n        bytes32 sighash = preimage.hash256();\n\n        uint256 challengeKey = uint256(\n            keccak256(abi.encodePacked(walletPublicKey, sighash))\n        );\n\n        FraudChallenge storage challenge = self.fraudChallenges[challengeKey];\n\n        require(challenge.reportedAt > 0, \"Fraud challenge does not exist\");\n        require(\n            !challenge.resolved,\n            \"Fraud challenge has already been resolved\"\n        );\n\n        // Ensure SIGHASH_ALL type was used during signing, which is represented\n        // by type value `1`.\n        require(extractSighashType(preimage) == 1, \"Wrong sighash type\");\n\n        uint256 utxoKey = witness\n            ? extractUtxoKeyFromWitnessPreimage(preimage)\n            : extractUtxoKeyFromNonWitnessPreimage(preimage);\n\n        // Check that the UTXO key identifies a correctly spent UTXO.\n        require(\n            self.deposits[utxoKey].sweptAt > 0 ||\n                self.spentMainUTXOs[utxoKey] ||\n                self.movedFundsSweepRequests[utxoKey].state ==\n                MovingFunds.MovedFundsSweepRequestState.Processed,\n            \"Spent UTXO not found among correctly spent UTXOs\"\n        );\n\n        resolveFraudChallenge(self, walletPublicKey, challenge, sighash);\n    }\n\n    /// @notice Allows to defeat a pending fraud challenge against a wallet by\n    ///         proving the sighash and signature were produced for an off-chain\n    ///         wallet heartbeat message following a strict format.\n    ///         In order to defeat the challenge the same `walletPublicKey` and\n    ///         signature (represented by `r`, `s` and `v`) must be provided as\n    ///         were used to calculate the sighash during heartbeat message\n    ///         signing. The fraud challenge defeat attempt will only succeed if\n    ///         the signed message follows a strict format required for\n    ///         heartbeat messages. If successfully defeated, the fraud\n    ///         challenge is marked as resolved and the amount of ether\n    ///         deposited by the challenger is sent to the treasury.\n    /// @param walletPublicKey The public key of the wallet in the uncompressed\n    ///        and unprefixed format (64 bytes)\n    /// @param heartbeatMessage Off-chain heartbeat message meeting the heartbeat\n    ///        message format requirements which produces sighash used to\n    ///        generate the ECDSA signature that is the subject of the fraud\n    ///        claim\n    /// @dev Requirements:\n    ///      - `walletPublicKey` and `sighash` calculated as\n    ///        `hash256(heartbeatMessage)` must identify an open fraud challenge\n    ///      - `heartbeatMessage` must follow a strict format of heartbeat\n    ///        messages\n    function defeatFraudChallengeWithHeartbeat(\n        BridgeState.Storage storage self,\n        bytes calldata walletPublicKey,\n        bytes calldata heartbeatMessage\n    ) external {\n        bytes32 sighash = heartbeatMessage.hash256();\n\n        uint256 challengeKey = uint256(\n            keccak256(abi.encodePacked(walletPublicKey, sighash))\n        );\n\n        FraudChallenge storage challenge = self.fraudChallenges[challengeKey];\n\n        require(challenge.reportedAt > 0, \"Fraud challenge does not exist\");\n        require(\n            !challenge.resolved,\n            \"Fraud challenge has already been resolved\"\n        );\n\n        require(\n            Heartbeat.isValidHeartbeatMessage(heartbeatMessage),\n            \"Not a valid heartbeat message\"\n        );\n\n        resolveFraudChallenge(self, walletPublicKey, challenge, sighash);\n    }\n\n    /// @notice Called only for successfully defeated fraud challenges.\n    ///         The fraud challenge is marked as resolved and the amount of\n    ///         ether deposited by the challenger is sent to the treasury.\n    /// @dev Requirements:\n    ///      - Must be called only for successfully defeated fraud challenges.\n    function resolveFraudChallenge(\n        BridgeState.Storage storage self,\n        bytes calldata walletPublicKey,\n        FraudChallenge storage challenge,\n        bytes32 sighash\n    ) internal {\n        // Mark the challenge as resolved as it was successfully defeated\n        challenge.resolved = true;\n\n        // Send the ether deposited by the challenger to the treasury\n        /* solhint-disable avoid-low-level-calls */\n        // slither-disable-next-line low-level-calls,unchecked-lowlevel,arbitrary-send\n        self.treasury.call{gas: 100000, value: challenge.depositAmount}(\"\");\n        /* solhint-enable avoid-low-level-calls */\n\n        bytes memory compressedWalletPublicKey = EcdsaLib.compressPublicKey(\n            walletPublicKey.slice32(0),\n            walletPublicKey.slice32(32)\n        );\n        bytes20 walletPubKeyHash = compressedWalletPublicKey.hash160View();\n\n        // slither-disable-next-line reentrancy-events\n        emit FraudChallengeDefeated(walletPubKeyHash, sighash);\n    }\n\n    /// @notice Notifies about defeat timeout for the given fraud challenge.\n    ///         Can be called only if there was a fraud challenge identified by\n    ///         the provided `walletPublicKey` and `sighash` and it was not\n    ///         defeated on time. The amount of time that needs to pass after\n    ///         a fraud challenge is reported is indicated by the\n    ///         `challengeDefeatTimeout`. After a successful fraud challenge\n    ///         defeat timeout notification the fraud challenge is marked as\n    ///         resolved, the stake of each operator is slashed, the ether\n    ///         deposited is returned to the challenger and the challenger is\n    ///         rewarded.\n    /// @param walletPublicKey The public key of the wallet in the uncompressed\n    ///        and unprefixed format (64 bytes)\n    /// @param walletMembersIDs Identifiers of the wallet signing group members\n    /// @param preimageSha256 The hash that was generated by applying SHA-256\n    ///        one time over the preimage used during input signing. The preimage\n    ///        is a serialized subset of the transaction and its structure\n    ///        depends on the transaction input (see BIP-143 for reference).\n    ///        Notice that applying SHA-256 over the `preimageSha256` results\n    ///        in `sighash`.  The path from `preimage` to `sighash` looks like\n    ///        this:\n    ///        preimage -> (SHA-256) -> preimageSha256 -> (SHA-256) -> sighash\n    /// @dev Requirements:\n    ///      - The wallet must be in the Live or MovingFunds or Closing or\n    ///        Terminated state\n    ///      - The `walletPublicKey` and `sighash` calculated from\n    ///        `preimageSha256` must identify an open fraud challenge\n    ///      - The expression `keccak256(abi.encode(walletMembersIDs))` must\n    ///        be exactly the same as the hash stored under `membersIdsHash`\n    ///        for the given `walletID`. Those IDs are not directly stored\n    ///        in the contract for gas efficiency purposes but they can be\n    ///        read from appropriate `DkgResultSubmitted` and `DkgResultApproved`\n    ///        events of the `WalletRegistry` contract\n    ///      - The amount of time indicated by `challengeDefeatTimeout` must pass\n    ///        after the challenge was reported\n    function notifyFraudChallengeDefeatTimeout(\n        BridgeState.Storage storage self,\n        bytes calldata walletPublicKey,\n        uint32[] calldata walletMembersIDs,\n        bytes memory preimageSha256\n    ) external {\n        bytes32 sighash = sha256(preimageSha256);\n\n        uint256 challengeKey = uint256(\n            keccak256(abi.encodePacked(walletPublicKey, sighash))\n        );\n\n        FraudChallenge storage challenge = self.fraudChallenges[challengeKey];\n\n        require(challenge.reportedAt > 0, \"Fraud challenge does not exist\");\n\n        require(\n            !challenge.resolved,\n            \"Fraud challenge has already been resolved\"\n        );\n\n        require(\n            /* solhint-disable-next-line not-rely-on-time */\n            block.timestamp >=\n                challenge.reportedAt + self.fraudChallengeDefeatTimeout,\n            \"Fraud challenge defeat period did not time out yet\"\n        );\n\n        challenge.resolved = true;\n        // Return the ether deposited by the challenger\n        /* solhint-disable avoid-low-level-calls */\n        // slither-disable-next-line low-level-calls,unchecked-lowlevel\n        challenge.challenger.call{gas: 100000, value: challenge.depositAmount}(\n            \"\"\n        );\n        /* solhint-enable avoid-low-level-calls */\n\n        bytes memory compressedWalletPublicKey = EcdsaLib.compressPublicKey(\n            walletPublicKey.slice32(0),\n            walletPublicKey.slice32(32)\n        );\n        bytes20 walletPubKeyHash = compressedWalletPublicKey.hash160View();\n\n        Wallets.Wallet storage wallet = self.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        Wallets.WalletState walletState = wallet.state;\n\n        if (\n            walletState == Wallets.WalletState.Live ||\n            walletState == Wallets.WalletState.MovingFunds ||\n            walletState == Wallets.WalletState.Closing\n        ) {\n            self.terminateWallet(walletPubKeyHash);\n\n            self.ecdsaWalletRegistry.seize(\n                self.fraudSlashingAmount,\n                self.fraudNotifierRewardMultiplier,\n                challenge.challenger,\n                wallet.ecdsaWalletID,\n                walletMembersIDs\n            );\n        } else if (walletState == Wallets.WalletState.Terminated) {\n            // This is a special case when the wallet was already terminated\n            // due to a previous deliberate protocol violation. In that\n            // case, this function should be still callable for other fraud\n            // challenges timeouts in order to let the challenger unlock its\n            // ETH deposit back. However, the wallet termination logic is\n            // not called and the challenger is not rewarded.\n        } else {\n            revert(\n                \"Wallet must be in Live or MovingFunds or Closing or Terminated state\"\n            );\n        }\n\n        // slither-disable-next-line reentrancy-events\n        emit FraudChallengeDefeatTimedOut(walletPubKeyHash, sighash);\n    }\n\n    /// @notice Extracts the UTXO keys from the given preimage used during\n    ///         signing of a witness input.\n    /// @param preimage The preimage which produces sighash used to generate the\n    ///        ECDSA signature that is the subject of the fraud claim. It is a\n    ///        serialized subset of the transaction. The exact subset used as\n    ///        the preimage depends on the transaction input the signature is\n    ///        produced for. See BIP-143 for reference\n    /// @return utxoKey UTXO key that identifies spent input.\n    function extractUtxoKeyFromWitnessPreimage(bytes calldata preimage)\n        internal\n        pure\n        returns (uint256 utxoKey)\n    {\n        // The expected structure of the preimage created during signing of a\n        // witness input:\n        // - transaction version (4 bytes)\n        // - hash of previous outpoints of all inputs (32 bytes)\n        // - hash of sequences of all inputs (32 bytes)\n        // - outpoint (hash + index) of the input being signed (36 bytes)\n        // - the unlocking script of the input (variable length)\n        // - value of the outpoint (8 bytes)\n        // - sequence of the input being signed (4 bytes)\n        // - hash of all outputs (32 bytes)\n        // - transaction locktime (4 bytes)\n        // - sighash type (4 bytes)\n\n        // See Bitcoin's BIP-143 for reference:\n        // https://github.com/bitcoin/bips/blob/master/bip-0143.mediawiki.\n\n        // The outpoint (hash and index) is located at the constant offset of\n        // 68 (4 + 32 + 32).\n        bytes32 outpointTxHash = preimage.extractInputTxIdLeAt(68);\n        uint32 outpointIndex = BTCUtils.reverseUint32(\n            uint32(preimage.extractTxIndexLeAt(68))\n        );\n\n        return\n            uint256(keccak256(abi.encodePacked(outpointTxHash, outpointIndex)));\n    }\n\n    /// @notice Extracts the UTXO key from the given preimage used during\n    ///         signing of a non-witness input.\n    /// @param preimage The preimage which produces sighash used to generate the\n    ///        ECDSA signature that is the subject of the fraud claim. It is a\n    ///        serialized subset of the transaction. The exact subset used as\n    ///        the preimage depends on the transaction input the signature is\n    ///        produced for. See BIP-143 for reference\n    /// @return utxoKey UTXO key that identifies spent input.\n    function extractUtxoKeyFromNonWitnessPreimage(bytes calldata preimage)\n        internal\n        pure\n        returns (uint256 utxoKey)\n    {\n        // The expected structure of the preimage created during signing of a\n        // non-witness input:\n        // - transaction version (4 bytes)\n        // - number of inputs written as compactSize uint (1 byte, 3 bytes,\n        //   5 bytes or 9 bytes)\n        // - for each input\n        //   - outpoint (hash and index) (36 bytes)\n        //   - unlocking script for the input being signed (variable length)\n        //     or `00` for all other inputs (1 byte)\n        //   - input sequence (4 bytes)\n        // - number of outputs written as compactSize uint (1 byte, 3 bytes,\n        //   5 bytes or 9 bytes)\n        // - outputs (variable length)\n        // - transaction locktime (4 bytes)\n        // - sighash type (4 bytes)\n\n        // See example for reference:\n        // https://en.bitcoin.it/wiki/OP_CHECKSIG#Code_samples_and_raw_dumps.\n\n        // The input data begins at the constant offset of 4 (the first 4 bytes\n        // are for the transaction version).\n        (uint256 inputsCompactSizeUintLength, uint256 inputsCount) = preimage\n            .parseVarIntAt(4);\n\n        // To determine the first input starting index, we must jump 4 bytes\n        // over the transaction version length and the compactSize uint which\n        // prepends the input vector. One byte must be added because\n        // `BtcUtils.parseVarInt` does not include compactSize uint tag in the\n        // returned length.\n        //\n        // For >= 0 && <= 252, `BTCUtils.determineVarIntDataLengthAt`\n        // returns `0`, so we jump over one byte of compactSize uint.\n        //\n        // For >= 253 && <= 0xffff there is `0xfd` tag,\n        // `BTCUtils.determineVarIntDataLengthAt` returns `2` (no\n        // tag byte included) so we need to jump over 1+2 bytes of\n        // compactSize uint.\n        //\n        // Please refer `BTCUtils` library and compactSize uint\n        // docs in `BitcoinTx` library for more details.\n        uint256 inputStartingIndex = 4 + 1 + inputsCompactSizeUintLength;\n\n        for (uint256 i = 0; i < inputsCount; i++) {\n            uint256 inputLength = preimage.determineInputLengthAt(\n                inputStartingIndex\n            );\n\n            (, uint256 scriptSigLength) = preimage.extractScriptSigLenAt(\n                inputStartingIndex\n            );\n\n            if (scriptSigLength > 0) {\n                // The input this preimage was generated for was found.\n                // All the other inputs in the preimage are marked with a null\n                // scriptSig (\"00\") which has length of 1.\n                bytes32 outpointTxHash = preimage.extractInputTxIdLeAt(\n                    inputStartingIndex\n                );\n                uint32 outpointIndex = BTCUtils.reverseUint32(\n                    uint32(preimage.extractTxIndexLeAt(inputStartingIndex))\n                );\n\n                utxoKey = uint256(\n                    keccak256(abi.encodePacked(outpointTxHash, outpointIndex))\n                );\n\n                break;\n            }\n\n            inputStartingIndex += inputLength;\n        }\n\n        return utxoKey;\n    }\n\n    /// @notice Extracts the sighash type from the given preimage.\n    /// @param preimage Serialized subset of the transaction. See BIP-143 for\n    ///        reference\n    /// @dev Sighash type is stored as the last 4 bytes in the preimage (little\n    ///      endian).\n    /// @return sighashType Sighash type as a 32-bit integer.\n    function extractSighashType(bytes calldata preimage)\n        internal\n        pure\n        returns (uint32 sighashType)\n    {\n        bytes4 sighashTypeBytes = preimage.slice4(preimage.length - 4);\n        uint32 sighashTypeLE = uint32(sighashTypeBytes);\n        return sighashTypeLE.reverseUint32();\n    }\n}\n"