@keep-network/tbtc-v2 0.1.1-dev.35 → 0.1.1-dev.36

package/artifacts/solcInputs/{922339b8aca537314dc3d35162317588.json → 4718d6e944ad9d1fc247efda870cf51a.json}

@@ -143,7 +143,7 @@
       "content": "// SPDX-License-Identifier: MIT\n\npragma solidity ^0.8.9;\n\nimport \"../bridge/BitcoinTx.sol\";\nimport \"../bridge/Bridge.sol\";\nimport \"../bridge/Wallets.sol\";\n\n// TODO: Try to create a separate BridgeStub for every test group (wallets,\n//       frauds, etc.) to decrease the size.\ncontract BridgeStub is Bridge {\n    constructor(\n        address _bank,\n        address _relay,\n        address _treasury,\n        address _walletRegistry,\n        uint256 _txProofDifficultyFactor\n    )\n        Bridge(\n            _bank,\n            _relay,\n            _treasury,\n            _walletRegistry,\n            _txProofDifficultyFactor\n        )\n    {}\n\n    function setSweptDeposits(BitcoinTx.UTXO[] calldata utxos) external {\n        for (uint256 i = 0; i < utxos.length; i++) {\n            uint256 utxoKey = uint256(\n                keccak256(\n                    abi.encodePacked(utxos[i].txHash, utxos[i].txOutputIndex)\n                )\n            );\n            self.deposits[utxoKey].sweptAt = 1641650400;\n        }\n    }\n\n    function setSpentMainUtxos(BitcoinTx.UTXO[] calldata utxos) external {\n        for (uint256 i = 0; i < utxos.length; i++) {\n            uint256 utxoKey = uint256(\n                keccak256(\n                    abi.encodePacked(utxos[i].txHash, utxos[i].txOutputIndex)\n                )\n            );\n            self.spentMainUTXOs[utxoKey] = true;\n        }\n    }\n\n    function setActiveWallet(bytes20 activeWalletPubKeyHash) external {\n        wallets.activeWalletPubKeyHash = activeWalletPubKeyHash;\n    }\n\n    function setWalletMainUtxo(\n        bytes20 walletPubKeyHash,\n        BitcoinTx.UTXO calldata utxo\n    ) external {\n        wallets.registeredWallets[walletPubKeyHash].mainUtxoHash = keccak256(\n            abi.encodePacked(\n                utxo.txHash,\n                utxo.txOutputIndex,\n                utxo.txOutputValue\n            )\n        );\n    }\n\n    function unsetWalletMainUtxo(bytes20 walletPubKeyHash) external {\n        delete wallets.registeredWallets[walletPubKeyHash].mainUtxoHash;\n    }\n\n    function setWallet(bytes20 walletPubKeyHash, Wallets.Wallet calldata wallet)\n        external\n    {\n        wallets.registeredWallets[walletPubKeyHash] = wallet;\n    }\n\n    function setDepositDustThreshold(uint64 _depositDustThreshold) external {\n        self.depositDustThreshold = _depositDustThreshold;\n    }\n\n    function setDepositTxMaxFee(uint64 _depositTxMaxFee) external {\n        self.depositTxMaxFee = _depositTxMaxFee;\n    }\n\n    function setRedemptionDustThreshold(uint64 _redemptionDustThreshold)\n        external\n    {\n        redemptionDustThreshold = _redemptionDustThreshold;\n    }\n\n    function setRedemptionTreasuryFeeDivisor(\n        uint64 _redemptionTreasuryFeeDivisor\n    ) external {\n        redemptionTreasuryFeeDivisor = _redemptionTreasuryFeeDivisor;\n    }\n\n    function setMovingFundsTxMaxTotalFee(uint64 _movingFundsTxMaxTotalFee)\n        external\n    {\n        movingFundsTxMaxTotalFee = _movingFundsTxMaxTotalFee;\n    }\n}\n"
     },
     "contracts/bridge/Bridge.sol": {
-      "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\n\nimport {BTCUtils} from \"@keep-network/bitcoin-spv-sol/contracts/BTCUtils.sol\";\nimport {BytesLib} from \"@keep-network/bitcoin-spv-sol/contracts/BytesLib.sol\";\n\nimport {IWalletOwner as EcdsaWalletOwner} from \"@keep-network/ecdsa/contracts/api/IWalletOwner.sol\";\n\nimport \"./IRelay.sol\";\nimport \"./BridgeState.sol\";\nimport \"./Deposit.sol\";\nimport \"./Sweep.sol\";\nimport \"./BitcoinTx.sol\";\nimport \"./EcdsaLib.sol\";\nimport \"./Wallets.sol\";\nimport \"./Frauds.sol\";\n\nimport \"../bank/Bank.sol\";\n\n/// @title Bitcoin Bridge\n/// @notice Bridge manages BTC deposit and redemption flow and is increasing and\n///         decreasing balances in the Bank as a result of BTC deposit and\n///         redemption operations performed by depositors and redeemers.\n///\n///         Depositors send BTC funds to the most recently created off-chain\n///         ECDSA wallet of the bridge using pay-to-script-hash (P2SH) or\n///         pay-to-witness-script-hash (P2WSH) containing hashed information\n///         about the depositor’s Ethereum address. Then, the depositor reveals\n///         their Ethereum address along with their deposit blinding factor,\n///         refund public key hash and refund locktime to the Bridge on Ethereum\n///         chain. The off-chain ECDSA wallet listens for these sorts of\n///         messages and when it gets one, it checks the Bitcoin network to make\n///         sure the deposit lines up. If it does, the off-chain ECDSA wallet\n///         may decide to pick the deposit transaction for sweeping, and when\n///         the sweep operation is confirmed on the Bitcoin network, the ECDSA\n///         wallet informs the Bridge about the sweep increasing appropriate\n///         balances in the Bank.\n/// @dev Bridge is an upgradeable component of the Bank.\n///\n/// TODO: All wallets-related operations that are currently done directly\n///       by the Bridge can be probably delegated to the Wallets library.\n///       Examples of such operations are main UTXO or pending redemptions\n///       value updates.\ncontract Bridge is Ownable, EcdsaWalletOwner {\n    using BridgeState for BridgeState.Storage;\n    using Deposit for BridgeState.Storage;\n    using Sweep for BridgeState.Storage;\n    using Frauds for Frauds.Data;\n    using Wallets for Wallets.Data;\n\n    using BTCUtils for bytes;\n    using BTCUtils for uint256;\n    using BytesLib for bytes;\n\n    /// @notice Represents a redemption request.\n    struct RedemptionRequest {\n        // ETH address of the redeemer who created the request.\n        address redeemer;\n        // Requested TBTC amount in satoshi.\n        uint64 requestedAmount;\n        // Treasury TBTC fee in satoshi at the moment of request creation.\n        uint64 treasuryFee;\n        // Transaction maximum BTC fee in satoshi at the moment of request\n        // creation.\n        uint64 txMaxFee;\n        // UNIX timestamp the request was created at.\n        uint32 requestedAt;\n    }\n\n    /// @notice Represents an outcome of the redemption Bitcoin transaction\n    ///         outputs processing.\n    struct RedemptionTxOutputsInfo {\n        // Total TBTC value in satoshi that should be burned by the Bridge.\n        // It includes the total amount of all BTC redeemed in the transaction\n        // and the fee paid to BTC miners for the redemption transaction.\n        uint64 totalBurnableValue;\n        // Total TBTC value in satoshi that should be transferred to\n        // the treasury. It is a sum of all treasury fees paid by all\n        // redeemers included in the redemption transaction.\n        uint64 totalTreasuryFee;\n        // Index of the change output. The change output becomes\n        // the new main wallet's UTXO.\n        uint32 changeIndex;\n        // Value in satoshi of the change output.\n        uint64 changeValue;\n    }\n\n    BridgeState.Storage internal self;\n\n    /// TODO: Make it governable.\n    /// @notice The minimal amount that can be requested for redemption.\n    ///         Value of this parameter must take into account the value of\n    ///         `redemptionTreasuryFeeDivisor` and `redemptionTxMaxFee`\n    ///         parameters in order to make requests that can incur the\n    ///         treasury and transaction fee and still satisfy the redeemer.\n    uint64 public redemptionDustThreshold;\n\n    /// TODO: Make it governable.\n    /// @notice Divisor used to compute the treasury fee taken from each\n    ///         redemption request and transferred to the treasury upon\n    ///         successful request finalization. That fee is computed as follows:\n    ///         `treasuryFee = requestedAmount / redemptionTreasuryFeeDivisor`\n    ///         For example, if the treasury fee needs to be 2% of each\n    ///         redemption request, the `redemptionTreasuryFeeDivisor` should\n    ///         be set to `50` because `1/50 = 0.02 = 2%`.\n    uint64 public redemptionTreasuryFeeDivisor;\n\n    /// TODO: Make it governable.\n    /// @notice Maximum amount of BTC transaction fee that can be incurred by\n    ///         each redemption request being part of the given redemption\n    ///         transaction. If the maximum BTC transaction fee is exceeded, such\n    ///         transaction is considered a fraud.\n    /// @dev This is a per-redemption output max fee for the redemption transaction.\n    uint64 public redemptionTxMaxFee;\n\n    /// TODO: Make it governable.\n    /// @notice Time after which the redemption request can be reported as\n    ///         timed out. It is counted from the moment when the redemption\n    ///         request was created via `requestRedemption` call. Reported\n    ///         timed out requests are cancelled and locked TBTC is returned\n    ///         to the redeemer in full amount.\n    uint256 public redemptionTimeout;\n\n    /// TODO: Make it governable.\n    /// @notice Maximum amount of the total BTC transaction fee that is\n    ///         acceptable in a single moving funds transaction.\n    /// @dev This is a TOTAL max fee for the moving funds transaction. Note that\n    ///      `depositTxMaxFee` is per single deposit and `redemptionTxMaxFee`\n    ///      if per single redemption. `movingFundsTxMaxTotalFee` is a total fee\n    ///      for the entire transaction.\n    uint64 public movingFundsTxMaxTotalFee;\n\n    /// @notice Collection of all pending redemption requests indexed by\n    ///         redemption key built as\n    ///         keccak256(walletPubKeyHash | redeemerOutputScript). The\n    ///         walletPubKeyHash is the 20-byte wallet's public key hash\n    ///         (computed using Bitcoin HASH160 over the compressed ECDSA\n    ///         public key) and redeemerOutputScript is a Bitcoin script\n    ///         (P2PKH, P2WPKH, P2SH or P2WSH) that will be used to lock\n    ///         redeemed BTC as requested by the redeemer. Requests are added\n    ///         to this mapping by the `requestRedemption` method (duplicates\n    ///         not allowed) and are removed by one of the following methods:\n    ///         - `submitRedemptionProof` in case the request was handled\n    ///           successfully\n    ///         - `notifyRedemptionTimeout` in case the request was reported\n    ///           to be timed out\n    mapping(uint256 => RedemptionRequest) public pendingRedemptions;\n\n    /// @notice Collection of all timed out redemptions requests indexed by\n    ///         redemption key built as\n    ///         keccak256(walletPubKeyHash | redeemerOutputScript). The\n    ///         walletPubKeyHash is the 20-byte wallet's public key hash\n    ///         (computed using Bitcoin HASH160 over the compressed ECDSA\n    ///         public key) and redeemerOutputScript is the Bitcoin script\n    ///         (P2PKH, P2WPKH, P2SH or P2WSH) that is involved in the timed\n    ///         out request. Timed out requests are stored in this mapping to\n    ///         avoid slashing the wallets multiple times for the same timeout.\n    ///         Only one method can add to this mapping:\n    ///         - `notifyRedemptionTimeout` which puts the redemption key\n    ///           to this mapping basing on a timed out request stored\n    ///           previously in `pendingRedemptions` mapping.\n    mapping(uint256 => RedemptionRequest) public timedOutRedemptions;\n\n    /// @notice Contains parameters related to frauds and the collection of all\n    ///         submitted fraud challenges.\n    Frauds.Data internal frauds;\n\n    /// @notice State related with wallets.\n    Wallets.Data internal wallets;\n\n    event WalletCreationPeriodUpdated(uint32 newCreationPeriod);\n\n    event WalletBtcBalanceRangeUpdated(\n        uint64 newMinBtcBalance,\n        uint64 newMaxBtcBalance\n    );\n\n    event WalletMaxAgeUpdated(uint32 newMaxAge);\n\n    event NewWalletRequested();\n\n    event NewWalletRegistered(\n        bytes32 indexed ecdsaWalletID,\n        bytes20 indexed walletPubKeyHash\n    );\n\n    event WalletMovingFunds(\n        bytes32 indexed ecdsaWalletID,\n        bytes20 indexed walletPubKeyHash\n    );\n\n    event WalletClosed(\n        bytes32 indexed ecdsaWalletID,\n        bytes20 indexed walletPubKeyHash\n    );\n\n    event WalletTerminated(\n        bytes32 indexed ecdsaWalletID,\n        bytes20 indexed walletPubKeyHash\n    );\n\n    event VaultStatusUpdated(address indexed vault, bool isTrusted);\n\n    event FraudSlashingAmountUpdated(uint256 newFraudSlashingAmount);\n\n    event FraudNotifierRewardMultiplierUpdated(\n        uint256 newFraudNotifierRewardMultiplier\n    );\n\n    event FraudChallengeDefeatTimeoutUpdated(\n        uint256 newFraudChallengeDefeatTimeout\n    );\n\n    event FraudChallengeDepositAmountUpdated(\n        uint256 newFraudChallengeDepositAmount\n    );\n\n    event DepositRevealed(\n        bytes32 fundingTxHash,\n        uint32 fundingOutputIndex,\n        address depositor,\n        uint64 amount,\n        bytes8 blindingFactor,\n        bytes20 walletPubKeyHash,\n        bytes20 refundPubKeyHash,\n        bytes4 refundLocktime,\n        address vault\n    );\n\n    event DepositsSwept(bytes20 walletPubKeyHash, bytes32 sweepTxHash);\n\n    event RedemptionRequested(\n        bytes20 walletPubKeyHash,\n        bytes redeemerOutputScript,\n        address redeemer,\n        uint64 requestedAmount,\n        uint64 treasuryFee,\n        uint64 txMaxFee\n    );\n\n    event RedemptionsCompleted(\n        bytes20 walletPubKeyHash,\n        bytes32 redemptionTxHash\n    );\n\n    event RedemptionTimedOut(\n        bytes20 walletPubKeyHash,\n        bytes redeemerOutputScript\n    );\n\n    event FraudChallengeSubmitted(\n        bytes20 walletPublicKeyHash,\n        bytes32 sighash,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    );\n\n    event FraudChallengeDefeated(bytes20 walletPublicKeyHash, bytes32 sighash);\n\n    event FraudChallengeDefeatTimedOut(\n        bytes20 walletPublicKeyHash,\n        bytes32 sighash\n    );\n\n    event MovingFundsCompleted(\n        bytes20 walletPubKeyHash,\n        bytes32 movingFundsTxHash\n    );\n\n    constructor(\n        address _bank,\n        address _relay,\n        address _treasury,\n        address _ecdsaWalletRegistry,\n        uint256 _txProofDifficultyFactor\n    ) {\n        require(_bank != address(0), \"Bank address cannot be zero\");\n        self.bank = Bank(_bank);\n\n        require(_relay != address(0), \"Relay address cannot be zero\");\n        self.relay = IRelay(_relay);\n\n        require(_treasury != address(0), \"Treasury address cannot be zero\");\n        self.treasury = _treasury;\n\n        self.txProofDifficultyFactor = _txProofDifficultyFactor;\n\n        // TODO: Revisit initial values.\n        self.depositDustThreshold = 1000000; // 1000000 satoshi = 0.01 BTC\n        self.depositTxMaxFee = 10000; // 10000 satoshi\n        self.depositTreasuryFeeDivisor = 2000; // 1/2000 == 5bps == 0.05% == 0.0005\n        redemptionDustThreshold = 1000000; // 1000000 satoshi = 0.01 BTC\n        redemptionTreasuryFeeDivisor = 2000; // 1/2000 == 5bps == 0.05% == 0.0005\n        redemptionTxMaxFee = 10000; // 10000 satoshi\n        redemptionTimeout = 172800; // 48 hours\n        movingFundsTxMaxTotalFee = 10000; // 10000 satoshi\n\n        // TODO: Revisit initial values.\n        frauds.setSlashingAmount(10000 * 1e18); // 10000 T\n        frauds.setNotifierRewardMultiplier(100); // 100%\n        frauds.setChallengeDefeatTimeout(7 days);\n        frauds.setChallengeDepositAmount(2 ether);\n\n        // TODO: Revisit initial values.\n        wallets.init(_ecdsaWalletRegistry);\n        wallets.setCreationPeriod(1 weeks);\n        wallets.setBtcBalanceRange(1 * 1e8, 10 * 1e8); // [1 BTC, 10 BTC]\n        wallets.setMaxAge(26 weeks); // ~6 months\n    }\n\n    /// @notice Updates parameters used by the `Wallets` library.\n    /// @param creationPeriod New value of the wallet creation period\n    /// @param minBtcBalance New value of the minimum BTC balance\n    /// @param maxBtcBalance New value of the maximum BTC balance\n    /// @param maxAge New value of the wallet maximum age\n    /// @dev Requirements:\n    ///      - Caller must be the contract owner.\n    ///      - Minimum BTC balance must be greater than zero\n    ///      - Maximum BTC balance must be greater than minimum BTC balance\n    function updateWalletsParameters(\n        uint32 creationPeriod,\n        uint64 minBtcBalance,\n        uint64 maxBtcBalance,\n        uint32 maxAge\n    ) external onlyOwner {\n        wallets.setCreationPeriod(creationPeriod);\n        wallets.setBtcBalanceRange(minBtcBalance, maxBtcBalance);\n        wallets.setMaxAge(maxAge);\n    }\n\n    /// @return creationPeriod Value of the wallet creation period\n    /// @return minBtcBalance Value of the minimum BTC balance\n    /// @return maxBtcBalance Value of the maximum BTC balance\n    /// @return maxAge Value of the wallet max age\n    function getWalletsParameters()\n        external\n        view\n        returns (\n            uint32 creationPeriod,\n            uint64 minBtcBalance,\n            uint64 maxBtcBalance,\n            uint32 maxAge\n        )\n    {\n        creationPeriod = wallets.creationPeriod;\n        minBtcBalance = wallets.minBtcBalance;\n        maxBtcBalance = wallets.maxBtcBalance;\n        maxAge = wallets.maxAge;\n\n        return (creationPeriod, minBtcBalance, maxBtcBalance, maxAge);\n    }\n\n    /// @notice Allows the Governance to mark the given vault address as trusted\n    ///         or no longer trusted. Vaults are not trusted by default.\n    ///         Trusted vault must meet the following criteria:\n    ///         - `IVault.receiveBalanceIncrease` must have a known, low gas\n    ///           cost.\n    ///         - `IVault.receiveBalanceIncrease` must never revert.\n    /// @dev Without restricting reveal only to trusted vaults, malicious\n    ///      vaults not meeting the criteria would be able to nuke sweep proof\n    ///      transactions executed by ECDSA wallet with  deposits routed to\n    ///      them.\n    /// @param vault The address of the vault\n    /// @param isTrusted flag indicating whether the vault is trusted or not\n    /// @dev Can only be called by the Governance.\n    function setVaultStatus(address vault, bool isTrusted) external onlyOwner {\n        self.isVaultTrusted[vault] = isTrusted;\n        emit VaultStatusUpdated(vault, isTrusted);\n    }\n\n    /// @notice Requests creation of a new wallet. This function just\n    ///         forms a request and the creation process is performed\n    ///         asynchronously. Once a wallet is created, the ECDSA Wallet\n    ///         Registry will notify this contract by calling the\n    ///         `__ecdsaWalletCreatedCallback` function.\n    /// @param activeWalletMainUtxo Data of the active wallet's main UTXO, as\n    ///        currently known on the Ethereum chain.\n    /// @dev Requirements:\n    ///      - `activeWalletMainUtxo` components must point to the recent main\n    ///        UTXO of the given active wallet, as currently known on the\n    ///        Ethereum chain. If there is no active wallet at the moment, or\n    ///        the active wallet has no main UTXO, this parameter can be\n    ///        empty as it is ignored.\n    ///      - Wallet creation must not be in progress\n    ///      - If the active wallet is set, one of the following\n    ///        conditions must be true:\n    ///        - The active wallet BTC balance is above the minimum threshold\n    ///          and the active wallet is old enough, i.e. the creation period\n    ///          was elapsed since its creation time\n    ///        - The active wallet BTC balance is above the maximum threshold\n    function requestNewWallet(BitcoinTx.UTXO calldata activeWalletMainUtxo)\n        external\n    {\n        wallets.requestNewWallet(activeWalletMainUtxo);\n    }\n\n    /// @notice A callback function that is called by the ECDSA Wallet Registry\n    ///         once a new ECDSA wallet is created.\n    /// @param ecdsaWalletID Wallet's unique identifier.\n    /// @param publicKeyX Wallet's public key's X coordinate.\n    /// @param publicKeyY Wallet's public key's Y coordinate.\n    /// @dev Requirements:\n    ///      - The only caller authorized to call this function is `registry`\n    ///      - Given wallet data must not belong to an already registered wallet\n    function __ecdsaWalletCreatedCallback(\n        bytes32 ecdsaWalletID,\n        bytes32 publicKeyX,\n        bytes32 publicKeyY\n    ) external override {\n        wallets.registerNewWallet(ecdsaWalletID, publicKeyX, publicKeyY);\n    }\n\n    /// @notice A callback function that is called by the ECDSA Wallet Registry\n    ///         once a wallet heartbeat failure is detected.\n    /// @param publicKeyX Wallet's public key's X coordinate\n    /// @param publicKeyY Wallet's public key's Y coordinate\n    /// @dev Requirements:\n    ///      - The only caller authorized to call this function is `registry`\n    ///      - Wallet must be in Live state\n    function __ecdsaWalletHeartbeatFailedCallback(\n        bytes32,\n        bytes32 publicKeyX,\n        bytes32 publicKeyY\n    ) external override {\n        wallets.notifyWalletHeartbeatFailed(publicKeyX, publicKeyY);\n    }\n\n    /// @notice Notifies that the wallet is either old enough or has too few\n    ///         satoshis left and qualifies to be closed.\n    /// @param walletPubKeyHash 20-byte public key hash of the wallet\n    /// @param walletMainUtxo Data of the wallet's main UTXO, as currently\n    ///        known on the Ethereum chain.\n    /// @dev Requirements:\n    ///      - Wallet must not be set as the current active wallet\n    ///      - Wallet must exceed the wallet maximum age OR the wallet BTC\n    ///        balance must be lesser than the minimum threshold. If the latter\n    ///        case is true, the `walletMainUtxo` components must point to the\n    ///        recent main UTXO of the given wallet, as currently known on the\n    ///        Ethereum chain. If the wallet has no main UTXO, this parameter\n    ///        can be empty as it is ignored since the wallet balance is\n    ///        assumed to be zero.\n    ///      - Wallet must be in Live state\n    function notifyCloseableWallet(\n        bytes20 walletPubKeyHash,\n        BitcoinTx.UTXO calldata walletMainUtxo\n    ) external {\n        wallets.notifyCloseableWallet(walletPubKeyHash, walletMainUtxo);\n    }\n\n    /// @notice Gets details about a registered wallet.\n    /// @param walletPubKeyHash The 20-byte wallet public key hash (computed\n    ///        using Bitcoin HASH160 over the compressed ECDSA public key)\n    /// @return Wallet details.\n    function getWallet(bytes20 walletPubKeyHash)\n        external\n        view\n        returns (Wallets.Wallet memory)\n    {\n        return wallets.registeredWallets[walletPubKeyHash];\n    }\n\n    /// @notice Gets the public key hash of the active wallet.\n    /// @return The 20-byte public key hash (computed using Bitcoin HASH160\n    ///         over the compressed ECDSA public key) of the active wallet.\n    ///         Returns bytes20(0) if there is no active wallet at the moment.\n    function getActiveWalletPubKeyHash() external view returns (bytes20) {\n        return wallets.activeWalletPubKeyHash;\n    }\n\n    /// @notice Used by the depositor to reveal information about their P2(W)SH\n    ///         Bitcoin deposit to the Bridge on Ethereum chain. The off-chain\n    ///         wallet listens for revealed deposit events and may decide to\n    ///         include the revealed deposit in the next executed sweep.\n    ///         Information about the Bitcoin deposit can be revealed before or\n    ///         after the Bitcoin transaction with P2(W)SH deposit is mined on\n    ///         the Bitcoin chain. Worth noting, the gas cost of this function\n    ///         scales with the number of P2(W)SH transaction inputs and\n    ///         outputs. The deposit may be routed to one of the trusted vaults.\n    ///         When a deposit is routed to a vault, vault gets notified when\n    ///         the deposit gets swept and it may execute the appropriate action.\n    /// @param fundingTx Bitcoin funding transaction data, see `BitcoinTx.Info`\n    /// @param reveal Deposit reveal data, see `RevealInfo struct\n    /// @dev Requirements:\n    ///      - `reveal.walletPubKeyHash` must identify a `Live` wallet\n    ///      - `reveal.vault` must be 0x0 or point to a trusted vault\n    ///      - `reveal.fundingOutputIndex` must point to the actual P2(W)SH\n    ///        output of the BTC deposit transaction\n    ///      - `reveal.depositor` must be the Ethereum address used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - `reveal.blindingFactor` must be the blinding factor used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - `reveal.walletPubKeyHash` must be the wallet pub key hash used in\n    ///        the P2(W)SH BTC deposit transaction,\n    ///      - `reveal.refundPubKeyHash` must be the refund pub key hash used in\n    ///        the P2(W)SH BTC deposit transaction,\n    ///      - `reveal.refundLocktime` must be the refund locktime used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - BTC deposit for the given `fundingTxHash`, `fundingOutputIndex`\n    ///        can be revealed only one time.\n    ///\n    ///      If any of these requirements is not met, the wallet _must_ refuse\n    ///      to sweep the deposit and the depositor has to wait until the\n    ///      deposit script unlocks to receive their BTC back.\n    function revealDeposit(\n        BitcoinTx.Info calldata fundingTx,\n        Deposit.RevealInfo calldata reveal\n    ) external {\n        self.revealDeposit(wallets, fundingTx, reveal);\n    }\n\n    /// @notice Used by the wallet to prove the BTC deposit sweep transaction\n    ///         and to update Bank balances accordingly. Sweep is only accepted\n    ///         if it satisfies SPV proof.\n    ///\n    ///         The function is performing Bank balance updates by first\n    ///         computing the Bitcoin fee for the sweep transaction. The fee is\n    ///         divided evenly between all swept deposits. Each depositor\n    ///         receives a balance in the bank equal to the amount inferred\n    ///         during the reveal transaction, minus their fee share.\n    ///\n    ///         It is possible to prove the given sweep only one time.\n    /// @param sweepTx Bitcoin sweep transaction data\n    /// @param sweepProof Bitcoin sweep proof data\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain. If no main UTXO exists for the given wallet,\n    ///        this parameter is ignored\n    /// @dev Requirements:\n    ///      - `sweepTx` components must match the expected structure. See\n    ///        `BitcoinTx.Info` docs for reference. Their values must exactly\n    ///        correspond to appropriate Bitcoin transaction fields to produce\n    ///        a provable transaction hash.\n    ///      - The `sweepTx` should represent a Bitcoin transaction with 1..n\n    ///        inputs. If the wallet has no main UTXO, all n inputs should\n    ///        correspond to P2(W)SH revealed deposits UTXOs. If the wallet has\n    ///        an existing main UTXO, one of the n inputs must point to that\n    ///        main UTXO and remaining n-1 inputs should correspond to P2(W)SH\n    ///        revealed deposits UTXOs. That transaction must have only\n    ///        one P2(W)PKH output locking funds on the 20-byte wallet public\n    ///        key hash.\n    ///      - `sweepProof` components must match the expected structure. See\n    ///        `BitcoinTx.Proof` docs for reference. The `bitcoinHeaders`\n    ///        field must contain a valid number of block headers, not less\n    ///        than the `txProofDifficultyFactor` contract constant.\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///        If there is no main UTXO, this parameter is ignored.\n    function submitSweepProof(\n        BitcoinTx.Info calldata sweepTx,\n        BitcoinTx.Proof calldata sweepProof,\n        BitcoinTx.UTXO calldata mainUtxo\n    ) external {\n        self.submitSweepProof(wallets, sweepTx, sweepProof, mainUtxo);\n    }\n\n    /// @notice Submits a fraud challenge indicating that a UTXO being under\n    ///         wallet control was unlocked by the wallet but was not used\n    ///         according to the protocol rules. That means the wallet signed\n    ///         a transaction input pointing to that UTXO and there is a unique\n    ///         sighash and signature pair associated with that input. This\n    ///         function uses those parameters to create a fraud accusation that\n    ///         proves a given transaction input unlocking the given UTXO was\n    ///         actually signed by the wallet. This function cannot determine\n    ///         whether the transaction was actually broadcast and the input was\n    ///         consumed in a fraudulent way so it just opens a challenge period\n    ///         during which the wallet can defeat the challenge by submitting\n    ///         proof of a transaction that consumes the given input according\n    ///         to protocol rules. To prevent spurious allegations, the caller\n    ///         must deposit ETH that is returned back upon justified fraud\n    ///         challenge or confiscated otherwise.\n    ///@param walletPublicKey The public key of the wallet in the uncompressed\n    ///       and unprefixed format (64 bytes)\n    /// @param sighash The hash that was used to produce the ECDSA signature\n    ///        that is the subject of the fraud claim. This hash is constructed\n    ///        by applying double SHA-256 over a serialized subset of the\n    ///        transaction. The exact subset used as hash preimage depends on\n    ///        the transaction input the signature is produced for. See BIP-143\n    ///        for reference\n    /// @param signature Bitcoin signature in the R/S/V format\n    /// @dev Requirements:\n    ///      - Wallet behind `walletPubKey` must be in `Live` or `MovingFunds`\n    ///        state\n    ///      - The challenger must send appropriate amount of ETH used as\n    ///        fraud challenge deposit\n    ///      - The signature (represented by r, s and v) must be generated by\n    ///        the wallet behind `walletPubKey` during signing of `sighash`\n    ///      - Wallet can be challenged for the given signature only once\n    function submitFraudChallenge(\n        bytes calldata walletPublicKey,\n        bytes32 sighash,\n        BitcoinTx.RSVSignature calldata signature\n    ) external payable {\n        bytes memory compressedWalletPublicKey = EcdsaLib.compressPublicKey(\n            walletPublicKey.slice32(0),\n            walletPublicKey.slice32(32)\n        );\n        bytes20 walletPubKeyHash = compressedWalletPublicKey.hash160View();\n\n        Wallets.Wallet storage wallet = wallets.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        require(\n            wallet.state == Wallets.WalletState.Live ||\n                wallet.state == Wallets.WalletState.MovingFunds,\n            \"Wallet is neither in Live nor MovingFunds state\"\n        );\n\n        frauds.submitChallenge(\n            walletPublicKey,\n            walletPubKeyHash,\n            sighash,\n            signature\n        );\n    }\n\n    /// @notice Allows to defeat a pending fraud challenge against a wallet if\n    ///         the transaction that spends the UTXO follows the protocol rules.\n    ///         In order to defeat the challenge the same `walletPublicKey` and\n    ///         signature (represented by `r`, `s` and `v`) must be provided as\n    ///         were used to calculate the sighash during input signing.\n    ///         The fraud challenge defeat attempt will only succeed if the\n    ///         inputs in the preimage are considered honestly spent by the\n    ///         wallet. Therefore the transaction spending the UTXO must be\n    ///         proven in the Bridge before a challenge defeat is called.\n    ///         If successfully defeated, the fraud challenge is marked as\n    ///         resolved and the amount of ether deposited by the challenger is\n    ///         sent to the treasury.\n    /// @param walletPublicKey The public key of the wallet in the uncompressed\n    ///        and unprefixed format (64 bytes)\n    /// @param preimage The preimage which produces sighash used to generate the\n    ///        ECDSA signature that is the subject of the fraud claim. It is a\n    ///        serialized subset of the transaction. The exact subset used as\n    ///        the preimage depends on the transaction input the signature is\n    ///        produced for. See BIP-143 for reference\n    /// @param witness Flag indicating whether the preimage was produced for a\n    ///        witness input. True for witness, false for non-witness input\n    /// @dev Requirements:\n    ///      - `walletPublicKey` and `sighash` calculated as `hash256(preimage)`\n    ///        must identify an open fraud challenge\n    ///      - the preimage must be a valid preimage of a transaction generated\n    ///        according to the protocol rules and already proved in the Bridge\n    ///      - before a defeat attempt is made the transaction that spends the\n    ///        given UTXO must be proven in the Bridge\n    function defeatFraudChallenge(\n        bytes calldata walletPublicKey,\n        bytes calldata preimage,\n        bool witness\n    ) external {\n        uint256 utxoKey = frauds.unwrapChallenge(\n            walletPublicKey,\n            preimage,\n            witness\n        );\n\n        // Check that the UTXO key identifies a correctly spent UTXO.\n        require(\n            self.deposits[utxoKey].sweptAt > 0 || self.spentMainUTXOs[utxoKey],\n            \"Spent UTXO not found among correctly spent UTXOs\"\n        );\n\n        frauds.defeatChallenge(walletPublicKey, preimage, self.treasury);\n    }\n\n    /// @notice Notifies about defeat timeout for the given fraud challenge.\n    ///         Can be called only if there was a fraud challenge identified by\n    ///         the provided `walletPublicKey` and `sighash` and it was not\n    ///         defeated on time. The amount of time that needs to pass after\n    ///         a fraud challenge is reported is indicated by the\n    ///         `challengeDefeatTimeout`. After a successful fraud challenge\n    ///         defeat timeout notification the fraud challenge is marked as\n    ///         resolved, the stake of each operator is slashed, the ether\n    ///         deposited is returned to the challenger and the challenger is\n    ///         rewarded.\n    /// @param walletPublicKey The public key of the wallet in the uncompressed\n    ///        and unprefixed format (64 bytes)\n    /// @param sighash The hash that was used to produce the ECDSA signature\n    ///        that is the subject of the fraud claim. This hash is constructed\n    ///        by applying double SHA-256 over a serialized subset of the\n    ///        transaction. The exact subset used as hash preimage depends on\n    ///        the transaction input the signature is produced for. See BIP-143\n    ///        for reference\n    /// @dev Requirements:\n    ///      - `walletPublicKey`and `sighash` must identify an open fraud\n    ///        challenge\n    ///      - the amount of time indicated by `challengeDefeatTimeout` must\n    ///        pass after the challenge was reported\n    function notifyFraudChallengeDefeatTimeout(\n        bytes calldata walletPublicKey,\n        bytes32 sighash\n    ) external {\n        frauds.notifyChallengeDefeatTimeout(walletPublicKey, sighash);\n    }\n\n    /// @notice Returns parameters used by the `Frauds` library.\n    /// @return slashingAmount Value of the slashing amount\n    /// @return notifierRewardMultiplier Value of the notifier reward multiplier\n    /// @return challengeDefeatTimeout Value of the challenge defeat timeout\n    /// @return challengeDepositAmount Value of the challenge deposit amount\n    function getFraudParameters()\n        external\n        view\n        returns (\n            uint256 slashingAmount,\n            uint256 notifierRewardMultiplier,\n            uint256 challengeDefeatTimeout,\n            uint256 challengeDepositAmount\n        )\n    {\n        slashingAmount = frauds.slashingAmount;\n        notifierRewardMultiplier = frauds.notifierRewardMultiplier;\n        challengeDefeatTimeout = frauds.challengeDefeatTimeout;\n        challengeDepositAmount = frauds.challengeDepositAmount;\n\n        return (\n            slashingAmount,\n            notifierRewardMultiplier,\n            challengeDefeatTimeout,\n            challengeDepositAmount\n        );\n    }\n\n    /// @notice Returns the fraud challenge identified by the given key built\n    ///         as keccak256(walletPublicKey|sighash).\n    function fraudChallenges(uint256 challengeKey)\n        external\n        view\n        returns (Frauds.FraudChallenge memory)\n    {\n        return frauds.challenges[challengeKey];\n    }\n\n    /// @notice Requests redemption of the given amount from the specified\n    ///         wallet to the redeemer Bitcoin output script.\n    /// @param walletPubKeyHash The 20-byte wallet public key hash (computed\n    ///        using Bitcoin HASH160 over the compressed ECDSA public key)\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain\n    /// @param redeemerOutputScript The redeemer's length-prefixed output\n    ///        script (P2PKH, P2WPKH, P2SH or P2WSH) that will be used to lock\n    ///        redeemed BTC\n    /// @param amount Requested amount in satoshi. This is also the TBTC amount\n    ///        that is taken from redeemer's balance in the Bank upon request.\n    ///        Once the request is handled, the actual amount of BTC locked\n    ///        on the redeemer output script will be always lower than this value\n    ///        since the treasury and Bitcoin transaction fees must be incurred.\n    ///        The minimal amount satisfying the request can be computed as:\n    ///        `amount - (amount / redemptionTreasuryFeeDivisor) - redemptionTxMaxFee`.\n    ///        Fees values are taken at the moment of request creation.\n    /// @dev Requirements:\n    ///      - Wallet behind `walletPubKeyHash` must be live\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///      - `redeemerOutputScript` must be a proper Bitcoin script\n    ///      - `redeemerOutputScript` cannot have wallet PKH as payload\n    ///      - `amount` must be above or equal the `redemptionDustThreshold`\n    ///      - Given `walletPubKeyHash` and `redeemerOutputScript` pair can be\n    ///        used for only one pending request at the same time\n    ///      - Wallet must have enough Bitcoin balance to proceed the request\n    ///      - Redeemer must make an allowance in the Bank that the Bridge\n    ///        contract can spend the given `amount`.\n    function requestRedemption(\n        bytes20 walletPubKeyHash,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes calldata redeemerOutputScript,\n        uint64 amount\n    ) external {\n        Wallets.Wallet storage wallet = wallets.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        require(\n            wallet.state == Wallets.WalletState.Live,\n            \"Wallet must be in Live state\"\n        );\n\n        bytes32 mainUtxoHash = wallet.mainUtxoHash;\n        require(\n            mainUtxoHash != bytes32(0),\n            \"No main UTXO for the given wallet\"\n        );\n        require(\n            keccak256(\n                abi.encodePacked(\n                    mainUtxo.txHash,\n                    mainUtxo.txOutputIndex,\n                    mainUtxo.txOutputValue\n                )\n            ) == mainUtxoHash,\n            \"Invalid main UTXO data\"\n        );\n\n        // TODO: Confirm if `walletPubKeyHash` should be validated by checking\n        //       if it is the oldest one who can handle the request. This will\n        //       be suggested by the dApp but may not be respected by users who\n        //       interact directly with the contract. Do we need to enforce it\n        //       here? One option is not to enforce it, to save on gas, but if\n        //       we see this rule is not respected, upgrade Bridge contract to\n        //       require it.\n\n        // Validate if redeemer output script is a correct standard type\n        // (P2PKH, P2WPKH, P2SH or P2WSH). This is done by building a stub\n        // output with 0 as value and using `BTCUtils.extractHash` on it. Such\n        // a function extracts the payload properly only from standard outputs\n        // so if it succeeds, we have a guarantee the redeemer output script\n        // is proper. Worth to note `extractHash` ignores the value at all\n        // so this is why we can use 0 safely. This way of validation is the\n        // same as in tBTC v1.\n        bytes memory redeemerOutputScriptPayload = abi\n            .encodePacked(bytes8(0), redeemerOutputScript)\n            .extractHash();\n        require(\n            redeemerOutputScriptPayload.length > 0,\n            \"Redeemer output script must be a standard type\"\n        );\n        // Check if the redeemer output script payload does not point to the\n        // wallet public key hash.\n        require(\n            keccak256(abi.encodePacked(walletPubKeyHash)) !=\n                keccak256(redeemerOutputScriptPayload),\n            \"Redeemer output script must not point to the wallet PKH\"\n        );\n\n        require(\n            amount >= redemptionDustThreshold,\n            \"Redemption amount too small\"\n        );\n\n        // The redemption key is built on top of the wallet public key hash\n        // and redeemer output script pair. That means there can be only one\n        // request asking for redemption from the given wallet to the given\n        // BTC script at the same time.\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, redeemerOutputScript))\n        );\n\n        // Check if given redemption key is not used by a pending redemption.\n        // There is no need to check for existence in `timedOutRedemptions`\n        // since the wallet's state is changed to other than Live after\n        // first time out is reported so making new requests is not possible.\n        // slither-disable-next-line incorrect-equality\n        require(\n            pendingRedemptions[redemptionKey].requestedAt == 0,\n            \"There is a pending redemption request from this wallet to the same address\"\n        );\n\n        // No need to check whether `amount - treasuryFee - txMaxFee > 0`\n        // since the `redemptionDustThreshold` should force that condition\n        // to be always true.\n        uint64 treasuryFee = redemptionTreasuryFeeDivisor > 0\n            ? amount / redemptionTreasuryFeeDivisor\n            : 0;\n        uint64 txMaxFee = redemptionTxMaxFee;\n\n        // The main wallet UTXO's value doesn't include all pending redemptions.\n        // To determine if the requested redemption can be performed by the\n        // wallet we need to subtract the total value of all pending redemptions\n        // from that wallet's main UTXO value. Given that the treasury fee is\n        // not redeemed from the wallet, we are subtracting it.\n        wallet.pendingRedemptionsValue += amount - treasuryFee;\n        require(\n            mainUtxo.txOutputValue >= wallet.pendingRedemptionsValue,\n            \"Insufficient wallet funds\"\n        );\n\n        pendingRedemptions[redemptionKey] = RedemptionRequest(\n            msg.sender,\n            amount,\n            treasuryFee,\n            txMaxFee,\n            /* solhint-disable-next-line not-rely-on-time */\n            uint32(block.timestamp)\n        );\n\n        emit RedemptionRequested(\n            walletPubKeyHash,\n            redeemerOutputScript,\n            msg.sender,\n            amount,\n            treasuryFee,\n            txMaxFee\n        );\n\n        self.bank.transferBalanceFrom(msg.sender, address(this), amount);\n    }\n\n    /// @notice Used by the wallet to prove the BTC redemption transaction\n    ///         and to make the necessary bookkeeping. Redemption is only\n    ///         accepted if it satisfies SPV proof.\n    ///\n    ///         The function is performing Bank balance updates by burning\n    ///         the total redeemed Bitcoin amount from Bridge balance and\n    ///         transferring the treasury fee sum to the treasury address.\n    ///\n    ///         It is possible to prove the given redemption only one time.\n    /// @param redemptionTx Bitcoin redemption transaction data\n    /// @param redemptionProof Bitcoin redemption proof data\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    ///        HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction\n    /// @dev Requirements:\n    ///      - `redemptionTx` components must match the expected structure. See\n    ///        `BitcoinTx.Info` docs for reference. Their values must exactly\n    ///        correspond to appropriate Bitcoin transaction fields to produce\n    ///        a provable transaction hash.\n    ///      - The `redemptionTx` should represent a Bitcoin transaction with\n    ///        exactly 1 input that refers to the wallet's main UTXO. That\n    ///        transaction should have 1..n outputs handling existing pending\n    ///        redemption requests or pointing to reported timed out requests.\n    ///        There can be also 1 optional output representing the\n    ///        change and pointing back to the 20-byte wallet public key hash.\n    ///        The change should be always present if the redeemed value sum\n    ///        is lower than the total wallet's BTC balance.\n    ///      - `redemptionProof` components must match the expected structure.\n    ///        See `BitcoinTx.Proof` docs for reference. The `bitcoinHeaders`\n    ///        field must contain a valid number of block headers, not less\n    ///        than the `txProofDifficultyFactor` contract constant.\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///        Additionally, the recent main UTXO on Ethereum must be set.\n    ///      - `walletPubKeyHash` must be connected with the main UTXO used\n    ///        as transaction single input.\n    ///      Other remarks:\n    ///      - Putting the change output as the first transaction output can\n    ///        save some gas because the output processing loop begins each\n    ///        iteration by checking whether the given output is the change\n    ///        thus uses some gas for making the comparison. Once the change\n    ///        is identified, that check is omitted in further iterations.\n    function submitRedemptionProof(\n        BitcoinTx.Info calldata redemptionTx,\n        BitcoinTx.Proof calldata redemptionProof,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes20 walletPubKeyHash\n    ) external {\n        // TODO: Just as for `submitSweepProof`, fail early if the function\n        //       call gets frontrunned. See discussion:\n        //       https://github.com/keep-network/tbtc-v2/pull/106#discussion_r801745204\n\n        // The actual transaction proof is performed here. After that point, we\n        // can assume the transaction happened on Bitcoin chain and has\n        // a sufficient number of confirmations as determined by\n        // `txProofDifficultyFactor` constant.\n        bytes32 redemptionTxHash = BitcoinTx.validateProof(\n            redemptionTx,\n            redemptionProof,\n            self.proofDifficultyContext()\n        );\n\n        // Process the redemption transaction input. Specifically, check if it\n        // refers to the expected wallet's main UTXO.\n        processWalletOutboundTxInput(\n            redemptionTx.inputVector,\n            mainUtxo,\n            walletPubKeyHash\n        );\n\n        Wallets.Wallet storage wallet = wallets.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        Wallets.WalletState walletState = wallet.state;\n        require(\n            walletState == Wallets.WalletState.Live ||\n                walletState == Wallets.WalletState.MovingFunds,\n            \"Wallet must be in Live or MovingFuds state\"\n        );\n\n        // Process redemption transaction outputs to extract some info required\n        // for further processing.\n        RedemptionTxOutputsInfo memory outputsInfo = processRedemptionTxOutputs(\n            redemptionTx.outputVector,\n            walletPubKeyHash\n        );\n\n        if (outputsInfo.changeValue > 0) {\n            // If the change value is grater than zero, it means the change\n            // output exists and can be used as new wallet's main UTXO.\n            wallet.mainUtxoHash = keccak256(\n                abi.encodePacked(\n                    redemptionTxHash,\n                    outputsInfo.changeIndex,\n                    outputsInfo.changeValue\n                )\n            );\n        } else {\n            // If the change value is zero, it means the change output doesn't\n            // exists and no funds left on the wallet. Delete the main UTXO\n            // for that wallet to represent that state in a proper way.\n            delete wallet.mainUtxoHash;\n        }\n\n        wallet.pendingRedemptionsValue -= outputsInfo.totalBurnableValue;\n\n        emit RedemptionsCompleted(walletPubKeyHash, redemptionTxHash);\n\n        self.bank.decreaseBalance(outputsInfo.totalBurnableValue);\n        self.bank.transferBalance(self.treasury, outputsInfo.totalTreasuryFee);\n    }\n\n    /// @notice Checks whether an outbound Bitcoin transaction performed from\n    ///         the given wallet has an input vector that contains a single\n    ///         input referring to the wallet's main UTXO. Marks that main UTXO\n    ///         as correctly spent if the validation succeeds. Reverts otherwise.\n    ///         There are two outbound transactions from a wallet possible: a\n    ///         redemption transaction or a moving funds to another wallet\n    ///         transaction.\n    /// @param walletOutboundTxInputVector Bitcoin outbound transaction's input\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVin` function\n    ///        before it is passed here\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain.\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the outbound transaction.\n    function processWalletOutboundTxInput(\n        bytes memory walletOutboundTxInputVector,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes20 walletPubKeyHash\n    ) internal {\n        // Assert that main UTXO for passed wallet exists in storage.\n        bytes32 mainUtxoHash = wallets\n            .registeredWallets[walletPubKeyHash]\n            .mainUtxoHash;\n        require(mainUtxoHash != bytes32(0), \"No main UTXO for given wallet\");\n\n        // Assert that passed main UTXO parameter is the same as in storage and\n        // can be used for further processing.\n        require(\n            keccak256(\n                abi.encodePacked(\n                    mainUtxo.txHash,\n                    mainUtxo.txOutputIndex,\n                    mainUtxo.txOutputValue\n                )\n            ) == mainUtxoHash,\n            \"Invalid main UTXO data\"\n        );\n\n        // Assert that the single outbound transaction input actually\n        // refers to the wallet's main UTXO.\n        (\n            bytes32 outpointTxHash,\n            uint32 outpointIndex\n        ) = parseWalletOutboundTxInput(walletOutboundTxInputVector);\n        require(\n            mainUtxo.txHash == outpointTxHash &&\n                mainUtxo.txOutputIndex == outpointIndex,\n            \"Outbound transaction input must point to the wallet's main UTXO\"\n        );\n\n        // Main UTXO used as an input, mark it as spent.\n        self.spentMainUTXOs[\n            uint256(\n                keccak256(\n                    abi.encodePacked(mainUtxo.txHash, mainUtxo.txOutputIndex)\n                )\n            )\n        ] = true;\n    }\n\n    /// @notice Parses the input vector of an outbound Bitcoin transaction\n    ///         performed from the given wallet. It extracts the single input\n    ///         then the transaction hash and output index from its outpoint.\n    ///         There are two outbound transactions from a wallet possible: a\n    ///         redemption transaction or a moving funds to another wallet\n    ///         transaction.\n    /// @param walletOutboundTxInputVector Bitcoin outbound transaction input\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVin` function\n    ///        before it is passed here\n    /// @return outpointTxHash 32-byte hash of the Bitcoin transaction which is\n    ///         pointed in the input's outpoint.\n    /// @return outpointIndex 4-byte index of the Bitcoin transaction output\n    ///         which is pointed in the input's outpoint.\n    function parseWalletOutboundTxInput(\n        bytes memory walletOutboundTxInputVector\n    ) internal pure returns (bytes32 outpointTxHash, uint32 outpointIndex) {\n        // To determine the total number of Bitcoin transaction inputs,\n        // we need to parse the compactSize uint (VarInt) the input vector is\n        // prepended by. That compactSize uint encodes the number of vector\n        // elements using the format presented in:\n        // https://developer.bitcoin.org/reference/transactions.html#compactsize-unsigned-integers\n        // We don't need asserting the compactSize uint is parseable since it\n        // was already checked during `validateVin` validation.\n        // See `BitcoinTx.inputVector` docs for more details.\n        (, uint256 inputsCount) = walletOutboundTxInputVector.parseVarInt();\n        require(\n            inputsCount == 1,\n            \"Outbound transaction must have a single input\"\n        );\n\n        bytes memory input = walletOutboundTxInputVector.extractInputAtIndex(0);\n\n        outpointTxHash = input.extractInputTxIdLE();\n\n        outpointIndex = BTCUtils.reverseUint32(\n            uint32(input.extractTxIndexLE())\n        );\n\n        // There is only one input in the transaction. Input has an outpoint\n        // field that is a reference to the transaction being spent (see\n        // `BitcoinTx` docs). The outpoint contains the hash of the transaction\n        // to spend (`outpointTxHash`) and the index of the specific output\n        // from that transaction (`outpointIndex`).\n        return (outpointTxHash, outpointIndex);\n    }\n\n    /// @notice Processes the Bitcoin redemption transaction output vector.\n    ///         It extracts each output and tries to identify it as a pending\n    ///         redemption request, reported timed out request, or change.\n    ///         Reverts if one of the outputs cannot be recognized properly.\n    ///         This function also marks each request as processed by removing\n    ///         them from `pendingRedemptions` mapping.\n    /// @param redemptionTxOutputVector Bitcoin redemption transaction output\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVout` function\n    ///        before it is passed here\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction.\n    /// @return info Outcomes of the processing.\n    function processRedemptionTxOutputs(\n        bytes memory redemptionTxOutputVector,\n        bytes20 walletPubKeyHash\n    ) internal returns (RedemptionTxOutputsInfo memory info) {\n        // Determining the total number of redemption transaction outputs in\n        // the same way as for number of inputs. See `BitcoinTx.outputVector`\n        // docs for more details.\n        (\n            uint256 outputsCompactSizeUintLength,\n            uint256 outputsCount\n        ) = redemptionTxOutputVector.parseVarInt();\n\n        // To determine the first output starting index, we must jump over\n        // the compactSize uint which prepends the output vector. One byte\n        // must be added because `BtcUtils.parseVarInt` does not include\n        // compactSize uint tag in the returned length.\n        //\n        // For >= 0 && <= 252, `BTCUtils.determineVarIntDataLengthAt`\n        // returns `0`, so we jump over one byte of compactSize uint.\n        //\n        // For >= 253 && <= 0xffff there is `0xfd` tag,\n        // `BTCUtils.determineVarIntDataLengthAt` returns `2` (no\n        // tag byte included) so we need to jump over 1+2 bytes of\n        // compactSize uint.\n        //\n        // Please refer `BTCUtils` library and compactSize uint\n        // docs in `BitcoinTx` library for more details.\n        uint256 outputStartingIndex = 1 + outputsCompactSizeUintLength;\n\n        // Calculate the keccak256 for two possible wallet's P2PKH or P2WPKH\n        // scripts that can be used to lock the change. This is done upfront to\n        // save on gas. Both scripts have a strict format defined by Bitcoin.\n        //\n        // The P2PKH script has the byte format: <0x1976a914> <20-byte PKH> <0x88ac>.\n        // According to https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n        // - 0x19: Byte length of the entire script\n        // - 0x76: OP_DUP\n        // - 0xa9: OP_HASH160\n        // - 0x14: Byte length of the public key hash\n        // - 0x88: OP_EQUALVERIFY\n        // - 0xac: OP_CHECKSIG\n        // which matches the P2PKH structure as per:\n        // https://en.bitcoin.it/wiki/Transaction#Pay-to-PubkeyHash\n        bytes32 walletP2PKHScriptKeccak = keccak256(\n            abi.encodePacked(hex\"1976a914\", walletPubKeyHash, hex\"88ac\")\n        );\n        // The P2WPKH script has the byte format: <0x160014> <20-byte PKH>.\n        // According to https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n        // - 0x16: Byte length of the entire script\n        // - 0x00: OP_0\n        // - 0x14: Byte length of the public key hash\n        // which matches the P2WPKH structure as per:\n        // https://github.com/bitcoin/bips/blob/master/bip-0141.mediawiki#P2WPKH\n        bytes32 walletP2WPKHScriptKeccak = keccak256(\n            abi.encodePacked(hex\"160014\", walletPubKeyHash)\n        );\n\n        // Helper variable that counts the number of processed redemption\n        // outputs. Redemptions can be either pending or reported as timed out.\n        // TODO: Revisit the approach with redemptions count according to\n        //       https://github.com/keep-network/tbtc-v2/pull/128#discussion_r808237765\n        uint256 processedRedemptionsCount = 0;\n\n        // Outputs processing loop.\n        for (uint256 i = 0; i < outputsCount; i++) {\n            // TODO: Check if we can optimize gas costs by adding\n            //       `extractValueAt` and `extractHashAt` in `bitcoin-spv-sol`\n            //       in order to avoid allocating bytes in memory.\n            uint256 outputLength = redemptionTxOutputVector\n                .determineOutputLengthAt(outputStartingIndex);\n            bytes memory output = redemptionTxOutputVector.slice(\n                outputStartingIndex,\n                outputLength\n            );\n\n            // Extract the value from given output.\n            uint64 outputValue = output.extractValue();\n            // The output consists of an 8-byte value and a variable length\n            // script. To extract that script we slice the output starting from\n            // 9th byte until the end.\n            bytes memory outputScript = output.slice(8, output.length - 8);\n\n            if (\n                info.changeValue == 0 &&\n                (keccak256(outputScript) == walletP2PKHScriptKeccak ||\n                    keccak256(outputScript) == walletP2WPKHScriptKeccak) &&\n                outputValue > 0\n            ) {\n                // If we entered here, that means the change output with a\n                // proper non-zero value was found.\n                info.changeIndex = uint32(i);\n                info.changeValue = outputValue;\n            } else {\n                // If we entered here, that the means the given output is\n                // supposed to represent a redemption. Build the redemption key\n                // to perform that check.\n                uint256 redemptionKey = uint256(\n                    keccak256(abi.encodePacked(walletPubKeyHash, outputScript))\n                );\n\n                if (pendingRedemptions[redemptionKey].requestedAt != 0) {\n                    // If we entered here, that means the output was identified\n                    // as a pending redemption request.\n                    RedemptionRequest storage request = pendingRedemptions[\n                        redemptionKey\n                    ];\n                    // Compute the request's redeemable amount as the requested\n                    // amount reduced by the treasury fee. The request's\n                    // minimal amount is then the redeemable amount reduced by\n                    // the maximum transaction fee.\n                    uint64 redeemableAmount = request.requestedAmount -\n                        request.treasuryFee;\n                    // Output value must fit between the request's redeemable\n                    // and minimal amounts to be deemed valid.\n                    require(\n                        redeemableAmount - request.txMaxFee <= outputValue &&\n                            outputValue <= redeemableAmount,\n                        \"Output value is not within the acceptable range of the pending request\"\n                    );\n                    // Add the redeemable amount to the total burnable value\n                    // the Bridge will use to decrease its balance in the Bank.\n                    info.totalBurnableValue += redeemableAmount;\n                    // Add the request's treasury fee to the total treasury fee\n                    // value the Bridge will transfer to the treasury.\n                    info.totalTreasuryFee += request.treasuryFee;\n                    // Request was properly handled so remove its redemption\n                    // key from the mapping to make it reusable for further\n                    // requests.\n                    delete pendingRedemptions[redemptionKey];\n\n                    processedRedemptionsCount++;\n                } else {\n                    // If we entered here, the output is not a redemption\n                    // request but there is still a chance the given output is\n                    // related to a reported timed out redemption request.\n                    // If so, check if the output value matches the request\n                    // amount to confirm this is an overdue request fulfillment\n                    // then bypass this output and process the subsequent\n                    // ones. That also means the wallet was already punished\n                    // for the inactivity. Otherwise, just revert.\n                    RedemptionRequest storage request = timedOutRedemptions[\n                        redemptionKey\n                    ];\n\n                    require(\n                        request.requestedAt != 0,\n                        \"Output is a non-requested redemption\"\n                    );\n\n                    uint64 redeemableAmount = request.requestedAmount -\n                        request.treasuryFee;\n\n                    require(\n                        redeemableAmount - request.txMaxFee <= outputValue &&\n                            outputValue <= redeemableAmount,\n                        \"Output value is not within the acceptable range of the timed out request\"\n                    );\n\n                    processedRedemptionsCount++;\n                }\n            }\n\n            // Make the `outputStartingIndex` pointing to the next output by\n            // increasing it by current output's length.\n            outputStartingIndex += outputLength;\n        }\n\n        // Protect against the cases when there is only a single change output\n        // referring back to the wallet PKH and just burning main UTXO value\n        // for transaction fees.\n        require(\n            processedRedemptionsCount > 0,\n            \"Redemption transaction must process at least one redemption\"\n        );\n\n        return info;\n    }\n\n    /// @notice Notifies that there is a pending redemption request associated\n    ///         with the given wallet, that has timed out. The redemption\n    ///         request is identified by the key built as\n    ///         `keccak256(walletPubKeyHash | redeemerOutputScript)`.\n    ///         The results of calling this function: the pending redemptions\n    ///         value for the wallet will be decreased by the requested amount\n    ///         (minus treasury fee), the tokens taken from the redeemer on\n    ///         redemption request will be returned to the redeemer, the request\n    ///         will be moved from pending redemptions to timed-out redemptions.\n    ///         If the state of the wallet is `Live` or `MovingFunds`, the\n    ///         wallet operators will be slashed.\n    ///         Additionally, if the state of wallet is `Live`, the wallet will\n    ///         be closed or marked as `MovingFunds` (depending on the presence\n    ///         or absence of the wallet's main UTXO) and the wallet will no\n    ///         longer be marked as the active wallet (if it was marked as such).\n    /// @param walletPubKeyHash 20-byte public key hash of the wallet\n    /// @param redeemerOutputScript  The redeemer's length-prefixed output\n    ///        script (P2PKH, P2WPKH, P2SH or P2WSH)\n    /// @dev Requirements:\n    ///      - The redemption request identified by `walletPubKeyHash` and\n    ///        `redeemerOutputScript` must exist\n    ///      - The amount of time defined by `redemptionTimeout` must have\n    ///        passed since the redemption was requested (the request must be\n    ///        timed-out).\n    function notifyRedemptionTimeout(\n        bytes20 walletPubKeyHash,\n        bytes calldata redeemerOutputScript\n    ) external {\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, redeemerOutputScript))\n        );\n        RedemptionRequest memory request = pendingRedemptions[redemptionKey];\n\n        require(request.requestedAt > 0, \"Redemption request does not exist\");\n        require(\n            /* solhint-disable-next-line not-rely-on-time */\n            request.requestedAt + redemptionTimeout < block.timestamp,\n            \"Redemption request has not timed out\"\n        );\n\n        // Update the wallet's pending redemptions value\n        Wallets.Wallet storage wallet = wallets.registeredWallets[\n            walletPubKeyHash\n        ];\n        wallet.pendingRedemptionsValue -=\n            request.requestedAmount -\n            request.treasuryFee;\n\n        require(\n            // TODO: Allow the wallets in `Closing` state when the state is added\n            wallet.state == Wallets.WalletState.Live ||\n                wallet.state == Wallets.WalletState.MovingFunds ||\n                wallet.state == Wallets.WalletState.Terminated,\n            \"The wallet must be in Live, MovingFunds or Terminated state\"\n        );\n\n        // It is worth noting that there is no need to check if\n        // `timedOutRedemption` mapping already contains the given redemption\n        // key. There is no possibility to re-use a key of a reported timed-out\n        // redemption because the wallet responsible for causing the timeout is\n        // moved to a state that prevents it to receive new redemption requests.\n\n        // Move the redemption from pending redemptions to timed-out redemptions\n        timedOutRedemptions[redemptionKey] = request;\n        delete pendingRedemptions[redemptionKey];\n\n        if (\n            wallet.state == Wallets.WalletState.Live ||\n            wallet.state == Wallets.WalletState.MovingFunds\n        ) {\n            // Propagate timeout consequences to the wallet\n            wallets.notifyRedemptionTimedOut(walletPubKeyHash);\n        }\n\n        emit RedemptionTimedOut(walletPubKeyHash, redeemerOutputScript);\n\n        // Return the requested amount of tokens to the redeemer\n        self.bank.transferBalance(request.redeemer, request.requestedAmount);\n    }\n\n    /// @notice Used by the wallet to prove the BTC moving funds transaction\n    ///         and to make the necessary state changes. Moving funds is only\n    ///         accepted if it satisfies SPV proof.\n    ///\n    ///         The function validates the moving funds transaction structure\n    ///         by checking if it actually spends the main UTXO of the declared\n    ///         wallet and locks the value on the pre-committed target wallets\n    ///         using a reasonable transaction fee. If all preconditions are\n    ///         met, this functions closes the source wallet.\n    ///\n    ///         It is possible to prove the given moving funds transaction only\n    ///         one time.\n    /// @param movingFundsTx Bitcoin moving funds transaction data\n    /// @param movingFundsProof Bitcoin moving funds proof data\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    ///        HASH160 over the compressed ECDSA public key) of the wallet\n    ///        which performed the moving funds transaction\n    /// @dev Requirements:\n    ///      - `movingFundsTx` components must match the expected structure. See\n    ///        `BitcoinTx.Info` docs for reference. Their values must exactly\n    ///        correspond to appropriate Bitcoin transaction fields to produce\n    ///        a provable transaction hash.\n    ///      - The `movingFundsTx` should represent a Bitcoin transaction with\n    ///        exactly 1 input that refers to the wallet's main UTXO. That\n    ///        transaction should have 1..n outputs corresponding to the\n    ///        pre-committed target wallets. Outputs must be ordered in the\n    ///        same way as their corresponding target wallets are ordered\n    ///        within the target wallets commitment.\n    ///      - `movingFundsProof` components must match the expected structure.\n    ///        See `BitcoinTx.Proof` docs for reference. The `bitcoinHeaders`\n    ///        field must contain a valid number of block headers, not less\n    ///        than the `txProofDifficultyFactor` contract constant.\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///        Additionally, the recent main UTXO on Ethereum must be set.\n    ///      - `walletPubKeyHash` must be connected with the main UTXO used\n    ///        as transaction single input.\n    ///      - The wallet that `walletPubKeyHash` points to must be in the\n    ///        MovingFunds state.\n    ///      - The target wallets commitment must be submitted by the wallet\n    ///        that `walletPubKeyHash` points to.\n    ///      - The total Bitcoin transaction fee must be lesser or equal\n    ///        to `movingFundsTxMaxTotalFee` governable parameter.\n    function submitMovingFundsProof(\n        BitcoinTx.Info calldata movingFundsTx,\n        BitcoinTx.Proof calldata movingFundsProof,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes20 walletPubKeyHash\n    ) external {\n        // The actual transaction proof is performed here. After that point, we\n        // can assume the transaction happened on Bitcoin chain and has\n        // a sufficient number of confirmations as determined by\n        // `txProofDifficultyFactor` constant.\n        bytes32 movingFundsTxHash = BitcoinTx.validateProof(\n            movingFundsTx,\n            movingFundsProof,\n            self.proofDifficultyContext()\n        );\n\n        // Process the moving funds transaction input. Specifically, check if\n        // it refers to the expected wallet's main UTXO.\n        processWalletOutboundTxInput(\n            movingFundsTx.inputVector,\n            mainUtxo,\n            walletPubKeyHash\n        );\n\n        (\n            bytes32 targetWalletsHash,\n            uint256 outputsTotalValue\n        ) = processMovingFundsTxOutputs(movingFundsTx.outputVector);\n\n        require(\n            mainUtxo.txOutputValue - outputsTotalValue <=\n                movingFundsTxMaxTotalFee,\n            \"Transaction fee is too high\"\n        );\n\n        wallets.notifyFundsMoved(walletPubKeyHash, targetWalletsHash);\n\n        emit MovingFundsCompleted(walletPubKeyHash, movingFundsTxHash);\n    }\n\n    /// @notice Processes the moving funds Bitcoin transaction output vector\n    ///         and extracts information required for further processing.\n    /// @param movingFundsTxOutputVector Bitcoin moving funds transaction output\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVout` function\n    ///        before it is passed here\n    /// @return targetWalletsHash keccak256 hash over the list of actual\n    ///         target wallets used in the transaction.\n    /// @return outputsTotalValue Sum of all outputs values.\n    /// @dev Requirements:\n    ///      - The `movingFundsTxOutputVector` must be parseable, i.e. must\n    ///        be validated by the caller as stated in their parameter doc.\n    ///      - Each output must refer to a 20-byte public key hash.\n    ///      - The total outputs value must be evenly divided over all outputs.\n    function processMovingFundsTxOutputs(bytes memory movingFundsTxOutputVector)\n        internal\n        view\n        returns (bytes32 targetWalletsHash, uint256 outputsTotalValue)\n    {\n        // Determining the total number of Bitcoin transaction outputs in\n        // the same way as for number of inputs. See `BitcoinTx.outputVector`\n        // docs for more details.\n        (\n            uint256 outputsCompactSizeUintLength,\n            uint256 outputsCount\n        ) = movingFundsTxOutputVector.parseVarInt();\n\n        // To determine the first output starting index, we must jump over\n        // the compactSize uint which prepends the output vector. One byte\n        // must be added because `BtcUtils.parseVarInt` does not include\n        // compactSize uint tag in the returned length.\n        //\n        // For >= 0 && <= 252, `BTCUtils.determineVarIntDataLengthAt`\n        // returns `0`, so we jump over one byte of compactSize uint.\n        //\n        // For >= 253 && <= 0xffff there is `0xfd` tag,\n        // `BTCUtils.determineVarIntDataLengthAt` returns `2` (no\n        // tag byte included) so we need to jump over 1+2 bytes of\n        // compactSize uint.\n        //\n        // Please refer `BTCUtils` library and compactSize uint\n        // docs in `BitcoinTx` library for more details.\n        uint256 outputStartingIndex = 1 + outputsCompactSizeUintLength;\n\n        bytes20[] memory targetWallets = new bytes20[](outputsCount);\n        uint64[] memory outputsValues = new uint64[](outputsCount);\n\n        // Outputs processing loop.\n        for (uint256 i = 0; i < outputsCount; i++) {\n            uint256 outputLength = movingFundsTxOutputVector\n                .determineOutputLengthAt(outputStartingIndex);\n\n            bytes memory output = movingFundsTxOutputVector.slice(\n                outputStartingIndex,\n                outputLength\n            );\n\n            // Extract the output script payload.\n            bytes memory targetWalletPubKeyHashBytes = output.extractHash();\n            // Output script payload must refer to a known wallet public key\n            // hash which is always 20-byte.\n            require(\n                targetWalletPubKeyHashBytes.length == 20,\n                \"Target wallet public key hash must have 20 bytes\"\n            );\n\n            bytes20 targetWalletPubKeyHash = targetWalletPubKeyHashBytes\n                .slice20(0);\n\n            // The next step is making sure that the 20-byte public key hash\n            // is actually used in the right context of a P2PKH or P2WPKH\n            // output. To do so, we must extract the full script from the output\n            // and compare with the expected P2PKH and P2WPKH scripts\n            // referring to that 20-byte public key hash. The output consists\n            // of an 8-byte value and a variable length script. To extract the\n            // script we slice the output starting from 9th byte until the end.\n            bytes32 outputScriptKeccak = keccak256(\n                output.slice(8, output.length - 8)\n            );\n            // Build the expected P2PKH script which has the following byte\n            // format: <0x1976a914> <20-byte PKH> <0x88ac>. According to\n            // https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n            // - 0x19: Byte length of the entire script\n            // - 0x76: OP_DUP\n            // - 0xa9: OP_HASH160\n            // - 0x14: Byte length of the public key hash\n            // - 0x88: OP_EQUALVERIFY\n            // - 0xac: OP_CHECKSIG\n            // which matches the P2PKH structure as per:\n            // https://en.bitcoin.it/wiki/Transaction#Pay-to-PubkeyHash\n            bytes32 targetWalletP2PKHScriptKeccak = keccak256(\n                abi.encodePacked(\n                    hex\"1976a914\",\n                    targetWalletPubKeyHash,\n                    hex\"88ac\"\n                )\n            );\n            // Build the expected P2WPKH script which has the following format:\n            // <0x160014> <20-byte PKH>. According to\n            // https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n            // - 0x16: Byte length of the entire script\n            // - 0x00: OP_0\n            // - 0x14: Byte length of the public key hash\n            // which matches the P2WPKH structure as per:\n            // https://github.com/bitcoin/bips/blob/master/bip-0141.mediawiki#P2WPKH\n            bytes32 targetWalletP2WPKHScriptKeccak = keccak256(\n                abi.encodePacked(hex\"160014\", targetWalletPubKeyHash)\n            );\n            // Make sure the actual output script matches either the P2PKH\n            // or P2WPKH format.\n            require(\n                outputScriptKeccak == targetWalletP2PKHScriptKeccak ||\n                    outputScriptKeccak == targetWalletP2WPKHScriptKeccak,\n                \"Output must be P2PKH or P2WPKH\"\n            );\n\n            // Add the wallet public key hash to the list that will be used\n            // to build the result list hash. There is no need to check if\n            // given output is a change here because the actual target wallet\n            // list must be exactly the same as the pre-committed target wallet\n            // list which is guaranteed to be valid.\n            targetWallets[i] = targetWalletPubKeyHash;\n\n            // Extract the value from given output.\n            outputsValues[i] = output.extractValue();\n            outputsTotalValue += outputsValues[i];\n\n            // Make the `outputStartingIndex` pointing to the next output by\n            // increasing it by current output's length.\n            outputStartingIndex += outputLength;\n        }\n\n        // Compute the indivisible remainder that remains after dividing the\n        // outputs total value over all outputs evenly.\n        uint256 outputsTotalValueRemainder = outputsTotalValue % outputsCount;\n        // Compute the minimum allowed output value by dividing the outputs\n        // total value (reduced by the remainder) by the number of outputs.\n        uint256 minOutputValue = (outputsTotalValue -\n            outputsTotalValueRemainder) / outputsCount;\n        // Maximum possible value is the minimum value with the remainder included.\n        uint256 maxOutputValue = minOutputValue + outputsTotalValueRemainder;\n\n        for (uint256 i = 0; i < outputsCount; i++) {\n            require(\n                minOutputValue <= outputsValues[i] &&\n                    outputsValues[i] <= maxOutputValue,\n                \"Transaction amount is not distributed evenly\"\n            );\n        }\n\n        targetWalletsHash = keccak256(abi.encodePacked(targetWallets));\n\n        return (targetWalletsHash, outputsTotalValue);\n    }\n\n    /// @return bank Address of the Bank the Bridge belongs to.\n    /// @return relay Address of the Bitcoin relay providing the current Bitcoin\n    ///         network difficulty.\n    function getContracts() external view returns (Bank bank, IRelay relay) {\n        bank = self.bank;\n        relay = self.relay;\n    }\n\n    /// @notice Returns the current values of Bridge deposit parameters.\n    /// @return depositDustThreshold The minimal amount that can be requested\n    ///         to deposit. Value of this parameter must take into account the\n    ///         value of `depositTreasuryFeeDivisor` and `depositTxMaxFee`\n    ///         parameters in order to make requests that can incur the\n    ///         treasury and transaction fee and still satisfy the depositor.\n    /// @return depositTreasuryFeeDivisor Divisor used to compute the treasury\n    ///         fee taken from each deposit and transferred to the treasury upon\n    ///         sweep proof submission. That fee is computed as follows:\n    ///         `treasuryFee = depositedAmount / depositTreasuryFeeDivisor`\n    ///         For example, if the treasury fee needs to be 2% of each deposit,\n    ///         the `depositTreasuryFeeDivisor` should be set to `50`\n    ///         because `1/50 = 0.02 = 2%`.\n    /// @return depositTxMaxFee Maximum amount of BTC transaction fee that can\n    ///         be incurred by each swept deposit being part of the given sweep\n    ///         transaction. If the maximum BTC transaction fee is exceeded,\n    ///         such transaction is considered a fraud.\n    /// @return treasury Address where the deposit treasury fees will be\n    ///         sent to. Treasury takes part in the operators rewarding process.\n    /// @return txProofDifficultyFactor The number of confirmations on the\n    ///         Bitcoin chain required to successfully evaluate an SPV proof.\n    function depositParameters()\n        external\n        view\n        returns (\n            uint64 depositDustThreshold,\n            uint64 depositTreasuryFeeDivisor,\n            uint64 depositTxMaxFee,\n            address treasury,\n            uint256 txProofDifficultyFactor\n        )\n    {\n        depositDustThreshold = self.depositDustThreshold;\n        depositTreasuryFeeDivisor = self.depositTreasuryFeeDivisor;\n        depositTxMaxFee = self.depositTxMaxFee;\n        treasury = self.treasury;\n        txProofDifficultyFactor = self.txProofDifficultyFactor;\n    }\n\n    /// @notice Indicates if the vault with the given address is trusted or not.\n    ///         Depositors can route their revealed deposits only to trusted\n    ///         vaults and have trusted vaults notified about new deposits as\n    ///         soon as these deposits get swept. Vaults not trusted by the\n    ///         Bridge can still be used by Bank balance owners on their own\n    ///         responsibility - anyone can approve their Bank balance to any\n    ///         address.\n    function isVaultTrusted(address vault) external view returns (bool) {\n        return self.isVaultTrusted[vault];\n    }\n\n    /// @notice Collection of all revealed deposits indexed by\n    ///         keccak256(fundingTxHash | fundingOutputIndex).\n    ///         The fundingTxHash is bytes32 (ordered as in Bitcoin internally)\n    ///         and fundingOutputIndex an uint32. This mapping may contain valid\n    ///         and invalid deposits and the wallet is responsible for\n    ///         validating them before attempting to execute a sweep.\n    function deposits(uint256 depositKey)\n        external\n        view\n        returns (Deposit.Request memory)\n    {\n        // TODO: rename to getDeposit?\n        return self.deposits[depositKey];\n    }\n\n    /// @notice Collection of main UTXOs that are honestly spent indexed by\n    ///         keccak256(fundingTxHash | fundingOutputIndex). The fundingTxHash\n    ///         is bytes32 (ordered as in Bitcoin internally) and\n    ///         fundingOutputIndex an uint32. A main UTXO is considered honestly\n    ///         spent if it was used as an input of a transaction that have been\n    ///         proven in the Bridge.\n    function spentMainUTXOs(uint256 utxoKey) external view returns (bool) {\n        return self.spentMainUTXOs[utxoKey];\n    }\n}\n"
+      "content": "// SPDX-License-Identifier: MIT\n\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n// ██████████████     ▐████▌     ██████████████\n// ██████████████     ▐████▌     ██████████████\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n//               ▐████▌    ▐████▌\n\npragma solidity ^0.8.9;\n\nimport \"@openzeppelin/contracts/access/Ownable.sol\";\n\nimport {BTCUtils} from \"@keep-network/bitcoin-spv-sol/contracts/BTCUtils.sol\";\nimport {BytesLib} from \"@keep-network/bitcoin-spv-sol/contracts/BytesLib.sol\";\n\nimport {IWalletOwner as EcdsaWalletOwner} from \"@keep-network/ecdsa/contracts/api/IWalletOwner.sol\";\n\nimport \"./IRelay.sol\";\nimport \"./BridgeState.sol\";\nimport \"./Deposit.sol\";\nimport \"./Sweep.sol\";\nimport \"./BitcoinTx.sol\";\nimport \"./EcdsaLib.sol\";\nimport \"./Wallets.sol\";\nimport \"./Frauds.sol\";\n\nimport \"../bank/Bank.sol\";\n\n/// @title Bitcoin Bridge\n/// @notice Bridge manages BTC deposit and redemption flow and is increasing and\n///         decreasing balances in the Bank as a result of BTC deposit and\n///         redemption operations performed by depositors and redeemers.\n///\n///         Depositors send BTC funds to the most recently created off-chain\n///         ECDSA wallet of the bridge using pay-to-script-hash (P2SH) or\n///         pay-to-witness-script-hash (P2WSH) containing hashed information\n///         about the depositor’s Ethereum address. Then, the depositor reveals\n///         their Ethereum address along with their deposit blinding factor,\n///         refund public key hash and refund locktime to the Bridge on Ethereum\n///         chain. The off-chain ECDSA wallet listens for these sorts of\n///         messages and when it gets one, it checks the Bitcoin network to make\n///         sure the deposit lines up. If it does, the off-chain ECDSA wallet\n///         may decide to pick the deposit transaction for sweeping, and when\n///         the sweep operation is confirmed on the Bitcoin network, the ECDSA\n///         wallet informs the Bridge about the sweep increasing appropriate\n///         balances in the Bank.\n/// @dev Bridge is an upgradeable component of the Bank.\n///\n/// TODO: All wallets-related operations that are currently done directly\n///       by the Bridge can be probably delegated to the Wallets library.\n///       Examples of such operations are main UTXO or pending redemptions\n///       value updates.\ncontract Bridge is Ownable, EcdsaWalletOwner {\n    using BridgeState for BridgeState.Storage;\n    using Deposit for BridgeState.Storage;\n    using Sweep for BridgeState.Storage;\n    using Frauds for Frauds.Data;\n    using Wallets for Wallets.Data;\n\n    using BTCUtils for bytes;\n    using BTCUtils for uint256;\n    using BytesLib for bytes;\n\n    /// @notice Represents a redemption request.\n    struct RedemptionRequest {\n        // ETH address of the redeemer who created the request.\n        address redeemer;\n        // Requested TBTC amount in satoshi.\n        uint64 requestedAmount;\n        // Treasury TBTC fee in satoshi at the moment of request creation.\n        uint64 treasuryFee;\n        // Transaction maximum BTC fee in satoshi at the moment of request\n        // creation.\n        uint64 txMaxFee;\n        // UNIX timestamp the request was created at.\n        uint32 requestedAt;\n    }\n\n    /// @notice Represents an outcome of the redemption Bitcoin transaction\n    ///         outputs processing.\n    struct RedemptionTxOutputsInfo {\n        // Total TBTC value in satoshi that should be burned by the Bridge.\n        // It includes the total amount of all BTC redeemed in the transaction\n        // and the fee paid to BTC miners for the redemption transaction.\n        uint64 totalBurnableValue;\n        // Total TBTC value in satoshi that should be transferred to\n        // the treasury. It is a sum of all treasury fees paid by all\n        // redeemers included in the redemption transaction.\n        uint64 totalTreasuryFee;\n        // Index of the change output. The change output becomes\n        // the new main wallet's UTXO.\n        uint32 changeIndex;\n        // Value in satoshi of the change output.\n        uint64 changeValue;\n    }\n\n    /// @notice Represents temporary information needed during the processing of\n    ///         the redemption Bitcoin transaction outputs. This structure is an\n    ///         internal one and should not be exported outside of the redemption\n    ///         transaction processing code.\n    /// @dev Allows to mitigate \"stack too deep\" errors on EVM.\n    struct RedemptionTxOutputsProcessingInfo {\n        // The first output starting index in the transaction.\n        uint256 outputStartingIndex;\n        // The number of outputs in the transaction.\n        uint256 outputsCount;\n        // P2PKH script for the wallet. Needed to determine the change output.\n        bytes32 walletP2PKHScriptKeccak;\n        // P2WPKH script for the wallet. Needed to determine the change output.\n        bytes32 walletP2WPKHScriptKeccak;\n    }\n\n    BridgeState.Storage internal self;\n\n    /// TODO: Make it governable.\n    /// @notice The minimal amount that can be requested for redemption.\n    ///         Value of this parameter must take into account the value of\n    ///         `redemptionTreasuryFeeDivisor` and `redemptionTxMaxFee`\n    ///         parameters in order to make requests that can incur the\n    ///         treasury and transaction fee and still satisfy the redeemer.\n    uint64 public redemptionDustThreshold;\n\n    /// TODO: Make it governable.\n    /// @notice Divisor used to compute the treasury fee taken from each\n    ///         redemption request and transferred to the treasury upon\n    ///         successful request finalization. That fee is computed as follows:\n    ///         `treasuryFee = requestedAmount / redemptionTreasuryFeeDivisor`\n    ///         For example, if the treasury fee needs to be 2% of each\n    ///         redemption request, the `redemptionTreasuryFeeDivisor` should\n    ///         be set to `50` because `1/50 = 0.02 = 2%`.\n    uint64 public redemptionTreasuryFeeDivisor;\n\n    /// TODO: Make it governable.\n    /// @notice Maximum amount of BTC transaction fee that can be incurred by\n    ///         each redemption request being part of the given redemption\n    ///         transaction. If the maximum BTC transaction fee is exceeded, such\n    ///         transaction is considered a fraud.\n    /// @dev This is a per-redemption output max fee for the redemption transaction.\n    uint64 public redemptionTxMaxFee;\n\n    /// TODO: Make it governable.\n    /// @notice Time after which the redemption request can be reported as\n    ///         timed out. It is counted from the moment when the redemption\n    ///         request was created via `requestRedemption` call. Reported\n    ///         timed out requests are cancelled and locked TBTC is returned\n    ///         to the redeemer in full amount.\n    uint256 public redemptionTimeout;\n\n    /// TODO: Make it governable.\n    /// @notice Maximum amount of the total BTC transaction fee that is\n    ///         acceptable in a single moving funds transaction.\n    /// @dev This is a TOTAL max fee for the moving funds transaction. Note that\n    ///      `depositTxMaxFee` is per single deposit and `redemptionTxMaxFee`\n    ///      if per single redemption. `movingFundsTxMaxTotalFee` is a total fee\n    ///      for the entire transaction.\n    uint64 public movingFundsTxMaxTotalFee;\n\n    /// @notice Collection of all pending redemption requests indexed by\n    ///         redemption key built as\n    ///         keccak256(walletPubKeyHash | redeemerOutputScript). The\n    ///         walletPubKeyHash is the 20-byte wallet's public key hash\n    ///         (computed using Bitcoin HASH160 over the compressed ECDSA\n    ///         public key) and redeemerOutputScript is a Bitcoin script\n    ///         (P2PKH, P2WPKH, P2SH or P2WSH) that will be used to lock\n    ///         redeemed BTC as requested by the redeemer. Requests are added\n    ///         to this mapping by the `requestRedemption` method (duplicates\n    ///         not allowed) and are removed by one of the following methods:\n    ///         - `submitRedemptionProof` in case the request was handled\n    ///           successfully\n    ///         - `notifyRedemptionTimeout` in case the request was reported\n    ///           to be timed out\n    mapping(uint256 => RedemptionRequest) public pendingRedemptions;\n\n    /// @notice Collection of all timed out redemptions requests indexed by\n    ///         redemption key built as\n    ///         keccak256(walletPubKeyHash | redeemerOutputScript). The\n    ///         walletPubKeyHash is the 20-byte wallet's public key hash\n    ///         (computed using Bitcoin HASH160 over the compressed ECDSA\n    ///         public key) and redeemerOutputScript is the Bitcoin script\n    ///         (P2PKH, P2WPKH, P2SH or P2WSH) that is involved in the timed\n    ///         out request. Timed out requests are stored in this mapping to\n    ///         avoid slashing the wallets multiple times for the same timeout.\n    ///         Only one method can add to this mapping:\n    ///         - `notifyRedemptionTimeout` which puts the redemption key\n    ///           to this mapping basing on a timed out request stored\n    ///           previously in `pendingRedemptions` mapping.\n    mapping(uint256 => RedemptionRequest) public timedOutRedemptions;\n\n    /// @notice Contains parameters related to frauds and the collection of all\n    ///         submitted fraud challenges.\n    Frauds.Data internal frauds;\n\n    /// @notice State related with wallets.\n    Wallets.Data internal wallets;\n\n    event WalletCreationPeriodUpdated(uint32 newCreationPeriod);\n\n    event WalletBtcBalanceRangeUpdated(\n        uint64 newMinBtcBalance,\n        uint64 newMaxBtcBalance\n    );\n\n    event WalletMaxAgeUpdated(uint32 newMaxAge);\n\n    event NewWalletRequested();\n\n    event NewWalletRegistered(\n        bytes32 indexed ecdsaWalletID,\n        bytes20 indexed walletPubKeyHash\n    );\n\n    event WalletMovingFunds(\n        bytes32 indexed ecdsaWalletID,\n        bytes20 indexed walletPubKeyHash\n    );\n\n    event WalletClosed(\n        bytes32 indexed ecdsaWalletID,\n        bytes20 indexed walletPubKeyHash\n    );\n\n    event WalletTerminated(\n        bytes32 indexed ecdsaWalletID,\n        bytes20 indexed walletPubKeyHash\n    );\n\n    event VaultStatusUpdated(address indexed vault, bool isTrusted);\n\n    event FraudSlashingAmountUpdated(uint256 newFraudSlashingAmount);\n\n    event FraudNotifierRewardMultiplierUpdated(\n        uint256 newFraudNotifierRewardMultiplier\n    );\n\n    event FraudChallengeDefeatTimeoutUpdated(\n        uint256 newFraudChallengeDefeatTimeout\n    );\n\n    event FraudChallengeDepositAmountUpdated(\n        uint256 newFraudChallengeDepositAmount\n    );\n\n    event DepositRevealed(\n        bytes32 fundingTxHash,\n        uint32 fundingOutputIndex,\n        address depositor,\n        uint64 amount,\n        bytes8 blindingFactor,\n        bytes20 walletPubKeyHash,\n        bytes20 refundPubKeyHash,\n        bytes4 refundLocktime,\n        address vault\n    );\n\n    event DepositsSwept(bytes20 walletPubKeyHash, bytes32 sweepTxHash);\n\n    event RedemptionRequested(\n        bytes20 walletPubKeyHash,\n        bytes redeemerOutputScript,\n        address redeemer,\n        uint64 requestedAmount,\n        uint64 treasuryFee,\n        uint64 txMaxFee\n    );\n\n    event RedemptionsCompleted(\n        bytes20 walletPubKeyHash,\n        bytes32 redemptionTxHash\n    );\n\n    event RedemptionTimedOut(\n        bytes20 walletPubKeyHash,\n        bytes redeemerOutputScript\n    );\n\n    event FraudChallengeSubmitted(\n        bytes20 walletPublicKeyHash,\n        bytes32 sighash,\n        uint8 v,\n        bytes32 r,\n        bytes32 s\n    );\n\n    event FraudChallengeDefeated(bytes20 walletPublicKeyHash, bytes32 sighash);\n\n    event FraudChallengeDefeatTimedOut(\n        bytes20 walletPublicKeyHash,\n        bytes32 sighash\n    );\n\n    event MovingFundsCompleted(\n        bytes20 walletPubKeyHash,\n        bytes32 movingFundsTxHash\n    );\n\n    constructor(\n        address _bank,\n        address _relay,\n        address _treasury,\n        address _ecdsaWalletRegistry,\n        uint256 _txProofDifficultyFactor\n    ) {\n        require(_bank != address(0), \"Bank address cannot be zero\");\n        self.bank = Bank(_bank);\n\n        require(_relay != address(0), \"Relay address cannot be zero\");\n        self.relay = IRelay(_relay);\n\n        require(_treasury != address(0), \"Treasury address cannot be zero\");\n        self.treasury = _treasury;\n\n        self.txProofDifficultyFactor = _txProofDifficultyFactor;\n\n        // TODO: Revisit initial values.\n        self.depositDustThreshold = 1000000; // 1000000 satoshi = 0.01 BTC\n        self.depositTxMaxFee = 10000; // 10000 satoshi\n        self.depositTreasuryFeeDivisor = 2000; // 1/2000 == 5bps == 0.05% == 0.0005\n        redemptionDustThreshold = 1000000; // 1000000 satoshi = 0.01 BTC\n        redemptionTreasuryFeeDivisor = 2000; // 1/2000 == 5bps == 0.05% == 0.0005\n        redemptionTxMaxFee = 10000; // 10000 satoshi\n        redemptionTimeout = 172800; // 48 hours\n        movingFundsTxMaxTotalFee = 10000; // 10000 satoshi\n\n        // TODO: Revisit initial values.\n        frauds.setSlashingAmount(10000 * 1e18); // 10000 T\n        frauds.setNotifierRewardMultiplier(100); // 100%\n        frauds.setChallengeDefeatTimeout(7 days);\n        frauds.setChallengeDepositAmount(2 ether);\n\n        // TODO: Revisit initial values.\n        wallets.init(_ecdsaWalletRegistry);\n        wallets.setCreationPeriod(1 weeks);\n        wallets.setBtcBalanceRange(1 * 1e8, 10 * 1e8); // [1 BTC, 10 BTC]\n        wallets.setMaxAge(26 weeks); // ~6 months\n    }\n\n    /// @notice Updates parameters used by the `Wallets` library.\n    /// @param creationPeriod New value of the wallet creation period\n    /// @param minBtcBalance New value of the minimum BTC balance\n    /// @param maxBtcBalance New value of the maximum BTC balance\n    /// @param maxAge New value of the wallet maximum age\n    /// @dev Requirements:\n    ///      - Caller must be the contract owner.\n    ///      - Minimum BTC balance must be greater than zero\n    ///      - Maximum BTC balance must be greater than minimum BTC balance\n    function updateWalletsParameters(\n        uint32 creationPeriod,\n        uint64 minBtcBalance,\n        uint64 maxBtcBalance,\n        uint32 maxAge\n    ) external onlyOwner {\n        wallets.setCreationPeriod(creationPeriod);\n        wallets.setBtcBalanceRange(minBtcBalance, maxBtcBalance);\n        wallets.setMaxAge(maxAge);\n    }\n\n    /// @return creationPeriod Value of the wallet creation period\n    /// @return minBtcBalance Value of the minimum BTC balance\n    /// @return maxBtcBalance Value of the maximum BTC balance\n    /// @return maxAge Value of the wallet max age\n    function getWalletsParameters()\n        external\n        view\n        returns (\n            uint32 creationPeriod,\n            uint64 minBtcBalance,\n            uint64 maxBtcBalance,\n            uint32 maxAge\n        )\n    {\n        creationPeriod = wallets.creationPeriod;\n        minBtcBalance = wallets.minBtcBalance;\n        maxBtcBalance = wallets.maxBtcBalance;\n        maxAge = wallets.maxAge;\n\n        return (creationPeriod, minBtcBalance, maxBtcBalance, maxAge);\n    }\n\n    /// @notice Allows the Governance to mark the given vault address as trusted\n    ///         or no longer trusted. Vaults are not trusted by default.\n    ///         Trusted vault must meet the following criteria:\n    ///         - `IVault.receiveBalanceIncrease` must have a known, low gas\n    ///           cost.\n    ///         - `IVault.receiveBalanceIncrease` must never revert.\n    /// @dev Without restricting reveal only to trusted vaults, malicious\n    ///      vaults not meeting the criteria would be able to nuke sweep proof\n    ///      transactions executed by ECDSA wallet with  deposits routed to\n    ///      them.\n    /// @param vault The address of the vault\n    /// @param isTrusted flag indicating whether the vault is trusted or not\n    /// @dev Can only be called by the Governance.\n    function setVaultStatus(address vault, bool isTrusted) external onlyOwner {\n        self.isVaultTrusted[vault] = isTrusted;\n        emit VaultStatusUpdated(vault, isTrusted);\n    }\n\n    /// @notice Requests creation of a new wallet. This function just\n    ///         forms a request and the creation process is performed\n    ///         asynchronously. Once a wallet is created, the ECDSA Wallet\n    ///         Registry will notify this contract by calling the\n    ///         `__ecdsaWalletCreatedCallback` function.\n    /// @param activeWalletMainUtxo Data of the active wallet's main UTXO, as\n    ///        currently known on the Ethereum chain.\n    /// @dev Requirements:\n    ///      - `activeWalletMainUtxo` components must point to the recent main\n    ///        UTXO of the given active wallet, as currently known on the\n    ///        Ethereum chain. If there is no active wallet at the moment, or\n    ///        the active wallet has no main UTXO, this parameter can be\n    ///        empty as it is ignored.\n    ///      - Wallet creation must not be in progress\n    ///      - If the active wallet is set, one of the following\n    ///        conditions must be true:\n    ///        - The active wallet BTC balance is above the minimum threshold\n    ///          and the active wallet is old enough, i.e. the creation period\n    ///          was elapsed since its creation time\n    ///        - The active wallet BTC balance is above the maximum threshold\n    function requestNewWallet(BitcoinTx.UTXO calldata activeWalletMainUtxo)\n        external\n    {\n        wallets.requestNewWallet(activeWalletMainUtxo);\n    }\n\n    /// @notice A callback function that is called by the ECDSA Wallet Registry\n    ///         once a new ECDSA wallet is created.\n    /// @param ecdsaWalletID Wallet's unique identifier.\n    /// @param publicKeyX Wallet's public key's X coordinate.\n    /// @param publicKeyY Wallet's public key's Y coordinate.\n    /// @dev Requirements:\n    ///      - The only caller authorized to call this function is `registry`\n    ///      - Given wallet data must not belong to an already registered wallet\n    function __ecdsaWalletCreatedCallback(\n        bytes32 ecdsaWalletID,\n        bytes32 publicKeyX,\n        bytes32 publicKeyY\n    ) external override {\n        wallets.registerNewWallet(ecdsaWalletID, publicKeyX, publicKeyY);\n    }\n\n    /// @notice A callback function that is called by the ECDSA Wallet Registry\n    ///         once a wallet heartbeat failure is detected.\n    /// @param publicKeyX Wallet's public key's X coordinate\n    /// @param publicKeyY Wallet's public key's Y coordinate\n    /// @dev Requirements:\n    ///      - The only caller authorized to call this function is `registry`\n    ///      - Wallet must be in Live state\n    function __ecdsaWalletHeartbeatFailedCallback(\n        bytes32,\n        bytes32 publicKeyX,\n        bytes32 publicKeyY\n    ) external override {\n        wallets.notifyWalletHeartbeatFailed(publicKeyX, publicKeyY);\n    }\n\n    /// @notice Notifies that the wallet is either old enough or has too few\n    ///         satoshis left and qualifies to be closed.\n    /// @param walletPubKeyHash 20-byte public key hash of the wallet\n    /// @param walletMainUtxo Data of the wallet's main UTXO, as currently\n    ///        known on the Ethereum chain.\n    /// @dev Requirements:\n    ///      - Wallet must not be set as the current active wallet\n    ///      - Wallet must exceed the wallet maximum age OR the wallet BTC\n    ///        balance must be lesser than the minimum threshold. If the latter\n    ///        case is true, the `walletMainUtxo` components must point to the\n    ///        recent main UTXO of the given wallet, as currently known on the\n    ///        Ethereum chain. If the wallet has no main UTXO, this parameter\n    ///        can be empty as it is ignored since the wallet balance is\n    ///        assumed to be zero.\n    ///      - Wallet must be in Live state\n    function notifyCloseableWallet(\n        bytes20 walletPubKeyHash,\n        BitcoinTx.UTXO calldata walletMainUtxo\n    ) external {\n        wallets.notifyCloseableWallet(walletPubKeyHash, walletMainUtxo);\n    }\n\n    /// @notice Gets details about a registered wallet.\n    /// @param walletPubKeyHash The 20-byte wallet public key hash (computed\n    ///        using Bitcoin HASH160 over the compressed ECDSA public key)\n    /// @return Wallet details.\n    function getWallet(bytes20 walletPubKeyHash)\n        external\n        view\n        returns (Wallets.Wallet memory)\n    {\n        return wallets.registeredWallets[walletPubKeyHash];\n    }\n\n    /// @notice Gets the public key hash of the active wallet.\n    /// @return The 20-byte public key hash (computed using Bitcoin HASH160\n    ///         over the compressed ECDSA public key) of the active wallet.\n    ///         Returns bytes20(0) if there is no active wallet at the moment.\n    function getActiveWalletPubKeyHash() external view returns (bytes20) {\n        return wallets.activeWalletPubKeyHash;\n    }\n\n    /// @notice Used by the depositor to reveal information about their P2(W)SH\n    ///         Bitcoin deposit to the Bridge on Ethereum chain. The off-chain\n    ///         wallet listens for revealed deposit events and may decide to\n    ///         include the revealed deposit in the next executed sweep.\n    ///         Information about the Bitcoin deposit can be revealed before or\n    ///         after the Bitcoin transaction with P2(W)SH deposit is mined on\n    ///         the Bitcoin chain. Worth noting, the gas cost of this function\n    ///         scales with the number of P2(W)SH transaction inputs and\n    ///         outputs. The deposit may be routed to one of the trusted vaults.\n    ///         When a deposit is routed to a vault, vault gets notified when\n    ///         the deposit gets swept and it may execute the appropriate action.\n    /// @param fundingTx Bitcoin funding transaction data, see `BitcoinTx.Info`\n    /// @param reveal Deposit reveal data, see `RevealInfo struct\n    /// @dev Requirements:\n    ///      - `reveal.walletPubKeyHash` must identify a `Live` wallet\n    ///      - `reveal.vault` must be 0x0 or point to a trusted vault\n    ///      - `reveal.fundingOutputIndex` must point to the actual P2(W)SH\n    ///        output of the BTC deposit transaction\n    ///      - `reveal.depositor` must be the Ethereum address used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - `reveal.blindingFactor` must be the blinding factor used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - `reveal.walletPubKeyHash` must be the wallet pub key hash used in\n    ///        the P2(W)SH BTC deposit transaction,\n    ///      - `reveal.refundPubKeyHash` must be the refund pub key hash used in\n    ///        the P2(W)SH BTC deposit transaction,\n    ///      - `reveal.refundLocktime` must be the refund locktime used in the\n    ///        P2(W)SH BTC deposit transaction,\n    ///      - BTC deposit for the given `fundingTxHash`, `fundingOutputIndex`\n    ///        can be revealed only one time.\n    ///\n    ///      If any of these requirements is not met, the wallet _must_ refuse\n    ///      to sweep the deposit and the depositor has to wait until the\n    ///      deposit script unlocks to receive their BTC back.\n    function revealDeposit(\n        BitcoinTx.Info calldata fundingTx,\n        Deposit.RevealInfo calldata reveal\n    ) external {\n        self.revealDeposit(wallets, fundingTx, reveal);\n    }\n\n    /// @notice Used by the wallet to prove the BTC deposit sweep transaction\n    ///         and to update Bank balances accordingly. Sweep is only accepted\n    ///         if it satisfies SPV proof.\n    ///\n    ///         The function is performing Bank balance updates by first\n    ///         computing the Bitcoin fee for the sweep transaction. The fee is\n    ///         divided evenly between all swept deposits. Each depositor\n    ///         receives a balance in the bank equal to the amount inferred\n    ///         during the reveal transaction, minus their fee share.\n    ///\n    ///         It is possible to prove the given sweep only one time.\n    /// @param sweepTx Bitcoin sweep transaction data\n    /// @param sweepProof Bitcoin sweep proof data\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain. If no main UTXO exists for the given wallet,\n    ///        this parameter is ignored\n    /// @dev Requirements:\n    ///      - `sweepTx` components must match the expected structure. See\n    ///        `BitcoinTx.Info` docs for reference. Their values must exactly\n    ///        correspond to appropriate Bitcoin transaction fields to produce\n    ///        a provable transaction hash.\n    ///      - The `sweepTx` should represent a Bitcoin transaction with 1..n\n    ///        inputs. If the wallet has no main UTXO, all n inputs should\n    ///        correspond to P2(W)SH revealed deposits UTXOs. If the wallet has\n    ///        an existing main UTXO, one of the n inputs must point to that\n    ///        main UTXO and remaining n-1 inputs should correspond to P2(W)SH\n    ///        revealed deposits UTXOs. That transaction must have only\n    ///        one P2(W)PKH output locking funds on the 20-byte wallet public\n    ///        key hash.\n    ///      - `sweepProof` components must match the expected structure. See\n    ///        `BitcoinTx.Proof` docs for reference. The `bitcoinHeaders`\n    ///        field must contain a valid number of block headers, not less\n    ///        than the `txProofDifficultyFactor` contract constant.\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///        If there is no main UTXO, this parameter is ignored.\n    function submitSweepProof(\n        BitcoinTx.Info calldata sweepTx,\n        BitcoinTx.Proof calldata sweepProof,\n        BitcoinTx.UTXO calldata mainUtxo\n    ) external {\n        self.submitSweepProof(wallets, sweepTx, sweepProof, mainUtxo);\n    }\n\n    /// @notice Submits a fraud challenge indicating that a UTXO being under\n    ///         wallet control was unlocked by the wallet but was not used\n    ///         according to the protocol rules. That means the wallet signed\n    ///         a transaction input pointing to that UTXO and there is a unique\n    ///         sighash and signature pair associated with that input. This\n    ///         function uses those parameters to create a fraud accusation that\n    ///         proves a given transaction input unlocking the given UTXO was\n    ///         actually signed by the wallet. This function cannot determine\n    ///         whether the transaction was actually broadcast and the input was\n    ///         consumed in a fraudulent way so it just opens a challenge period\n    ///         during which the wallet can defeat the challenge by submitting\n    ///         proof of a transaction that consumes the given input according\n    ///         to protocol rules. To prevent spurious allegations, the caller\n    ///         must deposit ETH that is returned back upon justified fraud\n    ///         challenge or confiscated otherwise.\n    ///@param walletPublicKey The public key of the wallet in the uncompressed\n    ///       and unprefixed format (64 bytes)\n    /// @param sighash The hash that was used to produce the ECDSA signature\n    ///        that is the subject of the fraud claim. This hash is constructed\n    ///        by applying double SHA-256 over a serialized subset of the\n    ///        transaction. The exact subset used as hash preimage depends on\n    ///        the transaction input the signature is produced for. See BIP-143\n    ///        for reference\n    /// @param signature Bitcoin signature in the R/S/V format\n    /// @dev Requirements:\n    ///      - Wallet behind `walletPubKey` must be in `Live` or `MovingFunds`\n    ///        state\n    ///      - The challenger must send appropriate amount of ETH used as\n    ///        fraud challenge deposit\n    ///      - The signature (represented by r, s and v) must be generated by\n    ///        the wallet behind `walletPubKey` during signing of `sighash`\n    ///      - Wallet can be challenged for the given signature only once\n    function submitFraudChallenge(\n        bytes calldata walletPublicKey,\n        bytes32 sighash,\n        BitcoinTx.RSVSignature calldata signature\n    ) external payable {\n        bytes memory compressedWalletPublicKey = EcdsaLib.compressPublicKey(\n            walletPublicKey.slice32(0),\n            walletPublicKey.slice32(32)\n        );\n        bytes20 walletPubKeyHash = compressedWalletPublicKey.hash160View();\n\n        Wallets.Wallet storage wallet = wallets.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        require(\n            wallet.state == Wallets.WalletState.Live ||\n                wallet.state == Wallets.WalletState.MovingFunds,\n            \"Wallet is neither in Live nor MovingFunds state\"\n        );\n\n        frauds.submitChallenge(\n            walletPublicKey,\n            walletPubKeyHash,\n            sighash,\n            signature\n        );\n    }\n\n    /// @notice Allows to defeat a pending fraud challenge against a wallet if\n    ///         the transaction that spends the UTXO follows the protocol rules.\n    ///         In order to defeat the challenge the same `walletPublicKey` and\n    ///         signature (represented by `r`, `s` and `v`) must be provided as\n    ///         were used to calculate the sighash during input signing.\n    ///         The fraud challenge defeat attempt will only succeed if the\n    ///         inputs in the preimage are considered honestly spent by the\n    ///         wallet. Therefore the transaction spending the UTXO must be\n    ///         proven in the Bridge before a challenge defeat is called.\n    ///         If successfully defeated, the fraud challenge is marked as\n    ///         resolved and the amount of ether deposited by the challenger is\n    ///         sent to the treasury.\n    /// @param walletPublicKey The public key of the wallet in the uncompressed\n    ///        and unprefixed format (64 bytes)\n    /// @param preimage The preimage which produces sighash used to generate the\n    ///        ECDSA signature that is the subject of the fraud claim. It is a\n    ///        serialized subset of the transaction. The exact subset used as\n    ///        the preimage depends on the transaction input the signature is\n    ///        produced for. See BIP-143 for reference\n    /// @param witness Flag indicating whether the preimage was produced for a\n    ///        witness input. True for witness, false for non-witness input\n    /// @dev Requirements:\n    ///      - `walletPublicKey` and `sighash` calculated as `hash256(preimage)`\n    ///        must identify an open fraud challenge\n    ///      - the preimage must be a valid preimage of a transaction generated\n    ///        according to the protocol rules and already proved in the Bridge\n    ///      - before a defeat attempt is made the transaction that spends the\n    ///        given UTXO must be proven in the Bridge\n    function defeatFraudChallenge(\n        bytes calldata walletPublicKey,\n        bytes calldata preimage,\n        bool witness\n    ) external {\n        uint256 utxoKey = frauds.unwrapChallenge(\n            walletPublicKey,\n            preimage,\n            witness\n        );\n\n        // Check that the UTXO key identifies a correctly spent UTXO.\n        require(\n            self.deposits[utxoKey].sweptAt > 0 || self.spentMainUTXOs[utxoKey],\n            \"Spent UTXO not found among correctly spent UTXOs\"\n        );\n\n        frauds.defeatChallenge(walletPublicKey, preimage, self.treasury);\n    }\n\n    /// @notice Notifies about defeat timeout for the given fraud challenge.\n    ///         Can be called only if there was a fraud challenge identified by\n    ///         the provided `walletPublicKey` and `sighash` and it was not\n    ///         defeated on time. The amount of time that needs to pass after\n    ///         a fraud challenge is reported is indicated by the\n    ///         `challengeDefeatTimeout`. After a successful fraud challenge\n    ///         defeat timeout notification the fraud challenge is marked as\n    ///         resolved, the stake of each operator is slashed, the ether\n    ///         deposited is returned to the challenger and the challenger is\n    ///         rewarded.\n    /// @param walletPublicKey The public key of the wallet in the uncompressed\n    ///        and unprefixed format (64 bytes)\n    /// @param sighash The hash that was used to produce the ECDSA signature\n    ///        that is the subject of the fraud claim. This hash is constructed\n    ///        by applying double SHA-256 over a serialized subset of the\n    ///        transaction. The exact subset used as hash preimage depends on\n    ///        the transaction input the signature is produced for. See BIP-143\n    ///        for reference\n    /// @dev Requirements:\n    ///      - `walletPublicKey`and `sighash` must identify an open fraud\n    ///        challenge\n    ///      - the amount of time indicated by `challengeDefeatTimeout` must\n    ///        pass after the challenge was reported\n    function notifyFraudChallengeDefeatTimeout(\n        bytes calldata walletPublicKey,\n        bytes32 sighash\n    ) external {\n        frauds.notifyChallengeDefeatTimeout(walletPublicKey, sighash);\n    }\n\n    /// @notice Returns parameters used by the `Frauds` library.\n    /// @return slashingAmount Value of the slashing amount\n    /// @return notifierRewardMultiplier Value of the notifier reward multiplier\n    /// @return challengeDefeatTimeout Value of the challenge defeat timeout\n    /// @return challengeDepositAmount Value of the challenge deposit amount\n    function getFraudParameters()\n        external\n        view\n        returns (\n            uint256 slashingAmount,\n            uint256 notifierRewardMultiplier,\n            uint256 challengeDefeatTimeout,\n            uint256 challengeDepositAmount\n        )\n    {\n        slashingAmount = frauds.slashingAmount;\n        notifierRewardMultiplier = frauds.notifierRewardMultiplier;\n        challengeDefeatTimeout = frauds.challengeDefeatTimeout;\n        challengeDepositAmount = frauds.challengeDepositAmount;\n\n        return (\n            slashingAmount,\n            notifierRewardMultiplier,\n            challengeDefeatTimeout,\n            challengeDepositAmount\n        );\n    }\n\n    /// @notice Returns the fraud challenge identified by the given key built\n    ///         as keccak256(walletPublicKey|sighash).\n    function fraudChallenges(uint256 challengeKey)\n        external\n        view\n        returns (Frauds.FraudChallenge memory)\n    {\n        return frauds.challenges[challengeKey];\n    }\n\n    /// @notice Requests redemption of the given amount from the specified\n    ///         wallet to the redeemer Bitcoin output script.\n    /// @param walletPubKeyHash The 20-byte wallet public key hash (computed\n    ///        using Bitcoin HASH160 over the compressed ECDSA public key)\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain\n    /// @param redeemerOutputScript The redeemer's length-prefixed output\n    ///        script (P2PKH, P2WPKH, P2SH or P2WSH) that will be used to lock\n    ///        redeemed BTC\n    /// @param amount Requested amount in satoshi. This is also the TBTC amount\n    ///        that is taken from redeemer's balance in the Bank upon request.\n    ///        Once the request is handled, the actual amount of BTC locked\n    ///        on the redeemer output script will be always lower than this value\n    ///        since the treasury and Bitcoin transaction fees must be incurred.\n    ///        The minimal amount satisfying the request can be computed as:\n    ///        `amount - (amount / redemptionTreasuryFeeDivisor) - redemptionTxMaxFee`.\n    ///        Fees values are taken at the moment of request creation.\n    /// @dev Requirements:\n    ///      - Wallet behind `walletPubKeyHash` must be live\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///      - `redeemerOutputScript` must be a proper Bitcoin script\n    ///      - `redeemerOutputScript` cannot have wallet PKH as payload\n    ///      - `amount` must be above or equal the `redemptionDustThreshold`\n    ///      - Given `walletPubKeyHash` and `redeemerOutputScript` pair can be\n    ///        used for only one pending request at the same time\n    ///      - Wallet must have enough Bitcoin balance to proceed the request\n    ///      - Redeemer must make an allowance in the Bank that the Bridge\n    ///        contract can spend the given `amount`.\n    function requestRedemption(\n        bytes20 walletPubKeyHash,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes calldata redeemerOutputScript,\n        uint64 amount\n    ) external {\n        Wallets.Wallet storage wallet = wallets.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        require(\n            wallet.state == Wallets.WalletState.Live,\n            \"Wallet must be in Live state\"\n        );\n\n        bytes32 mainUtxoHash = wallet.mainUtxoHash;\n        require(\n            mainUtxoHash != bytes32(0),\n            \"No main UTXO for the given wallet\"\n        );\n        require(\n            keccak256(\n                abi.encodePacked(\n                    mainUtxo.txHash,\n                    mainUtxo.txOutputIndex,\n                    mainUtxo.txOutputValue\n                )\n            ) == mainUtxoHash,\n            \"Invalid main UTXO data\"\n        );\n\n        // TODO: Confirm if `walletPubKeyHash` should be validated by checking\n        //       if it is the oldest one who can handle the request. This will\n        //       be suggested by the dApp but may not be respected by users who\n        //       interact directly with the contract. Do we need to enforce it\n        //       here? One option is not to enforce it, to save on gas, but if\n        //       we see this rule is not respected, upgrade Bridge contract to\n        //       require it.\n\n        // Validate if redeemer output script is a correct standard type\n        // (P2PKH, P2WPKH, P2SH or P2WSH). This is done by building a stub\n        // output with 0 as value and using `BTCUtils.extractHash` on it. Such\n        // a function extracts the payload properly only from standard outputs\n        // so if it succeeds, we have a guarantee the redeemer output script\n        // is proper. Worth to note `extractHash` ignores the value at all\n        // so this is why we can use 0 safely. This way of validation is the\n        // same as in tBTC v1.\n        bytes memory redeemerOutputScriptPayload = abi\n            .encodePacked(bytes8(0), redeemerOutputScript)\n            .extractHash();\n        require(\n            redeemerOutputScriptPayload.length > 0,\n            \"Redeemer output script must be a standard type\"\n        );\n        // Check if the redeemer output script payload does not point to the\n        // wallet public key hash.\n        require(\n            keccak256(abi.encodePacked(walletPubKeyHash)) !=\n                keccak256(redeemerOutputScriptPayload),\n            \"Redeemer output script must not point to the wallet PKH\"\n        );\n\n        require(\n            amount >= redemptionDustThreshold,\n            \"Redemption amount too small\"\n        );\n\n        // The redemption key is built on top of the wallet public key hash\n        // and redeemer output script pair. That means there can be only one\n        // request asking for redemption from the given wallet to the given\n        // BTC script at the same time.\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, redeemerOutputScript))\n        );\n\n        // Check if given redemption key is not used by a pending redemption.\n        // There is no need to check for existence in `timedOutRedemptions`\n        // since the wallet's state is changed to other than Live after\n        // first time out is reported so making new requests is not possible.\n        // slither-disable-next-line incorrect-equality\n        require(\n            pendingRedemptions[redemptionKey].requestedAt == 0,\n            \"There is a pending redemption request from this wallet to the same address\"\n        );\n\n        // No need to check whether `amount - treasuryFee - txMaxFee > 0`\n        // since the `redemptionDustThreshold` should force that condition\n        // to be always true.\n        uint64 treasuryFee = redemptionTreasuryFeeDivisor > 0\n            ? amount / redemptionTreasuryFeeDivisor\n            : 0;\n        uint64 txMaxFee = redemptionTxMaxFee;\n\n        // The main wallet UTXO's value doesn't include all pending redemptions.\n        // To determine if the requested redemption can be performed by the\n        // wallet we need to subtract the total value of all pending redemptions\n        // from that wallet's main UTXO value. Given that the treasury fee is\n        // not redeemed from the wallet, we are subtracting it.\n        wallet.pendingRedemptionsValue += amount - treasuryFee;\n        require(\n            mainUtxo.txOutputValue >= wallet.pendingRedemptionsValue,\n            \"Insufficient wallet funds\"\n        );\n\n        pendingRedemptions[redemptionKey] = RedemptionRequest(\n            msg.sender,\n            amount,\n            treasuryFee,\n            txMaxFee,\n            /* solhint-disable-next-line not-rely-on-time */\n            uint32(block.timestamp)\n        );\n\n        emit RedemptionRequested(\n            walletPubKeyHash,\n            redeemerOutputScript,\n            msg.sender,\n            amount,\n            treasuryFee,\n            txMaxFee\n        );\n\n        self.bank.transferBalanceFrom(msg.sender, address(this), amount);\n    }\n\n    /// @notice Used by the wallet to prove the BTC redemption transaction\n    ///         and to make the necessary bookkeeping. Redemption is only\n    ///         accepted if it satisfies SPV proof.\n    ///\n    ///         The function is performing Bank balance updates by burning\n    ///         the total redeemed Bitcoin amount from Bridge balance and\n    ///         transferring the treasury fee sum to the treasury address.\n    ///\n    ///         It is possible to prove the given redemption only one time.\n    /// @param redemptionTx Bitcoin redemption transaction data\n    /// @param redemptionProof Bitcoin redemption proof data\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    ///        HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction\n    /// @dev Requirements:\n    ///      - `redemptionTx` components must match the expected structure. See\n    ///        `BitcoinTx.Info` docs for reference. Their values must exactly\n    ///        correspond to appropriate Bitcoin transaction fields to produce\n    ///        a provable transaction hash.\n    ///      - The `redemptionTx` should represent a Bitcoin transaction with\n    ///        exactly 1 input that refers to the wallet's main UTXO. That\n    ///        transaction should have 1..n outputs handling existing pending\n    ///        redemption requests or pointing to reported timed out requests.\n    ///        There can be also 1 optional output representing the\n    ///        change and pointing back to the 20-byte wallet public key hash.\n    ///        The change should be always present if the redeemed value sum\n    ///        is lower than the total wallet's BTC balance.\n    ///      - `redemptionProof` components must match the expected structure.\n    ///        See `BitcoinTx.Proof` docs for reference. The `bitcoinHeaders`\n    ///        field must contain a valid number of block headers, not less\n    ///        than the `txProofDifficultyFactor` contract constant.\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///        Additionally, the recent main UTXO on Ethereum must be set.\n    ///      - `walletPubKeyHash` must be connected with the main UTXO used\n    ///        as transaction single input.\n    ///      Other remarks:\n    ///      - Putting the change output as the first transaction output can\n    ///        save some gas because the output processing loop begins each\n    ///        iteration by checking whether the given output is the change\n    ///        thus uses some gas for making the comparison. Once the change\n    ///        is identified, that check is omitted in further iterations.\n    function submitRedemptionProof(\n        BitcoinTx.Info calldata redemptionTx,\n        BitcoinTx.Proof calldata redemptionProof,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes20 walletPubKeyHash\n    ) external {\n        // TODO: Just as for `submitSweepProof`, fail early if the function\n        //       call gets frontrunned. See discussion:\n        //       https://github.com/keep-network/tbtc-v2/pull/106#discussion_r801745204\n\n        // The actual transaction proof is performed here. After that point, we\n        // can assume the transaction happened on Bitcoin chain and has\n        // a sufficient number of confirmations as determined by\n        // `txProofDifficultyFactor` constant.\n        bytes32 redemptionTxHash = BitcoinTx.validateProof(\n            redemptionTx,\n            redemptionProof,\n            self.proofDifficultyContext()\n        );\n\n        // Process the redemption transaction input. Specifically, check if it\n        // refers to the expected wallet's main UTXO.\n        processWalletOutboundTxInput(\n            redemptionTx.inputVector,\n            mainUtxo,\n            walletPubKeyHash\n        );\n\n        Wallets.Wallet storage wallet = wallets.registeredWallets[\n            walletPubKeyHash\n        ];\n\n        Wallets.WalletState walletState = wallet.state;\n        require(\n            walletState == Wallets.WalletState.Live ||\n                walletState == Wallets.WalletState.MovingFunds,\n            \"Wallet must be in Live or MovingFuds state\"\n        );\n\n        // Process redemption transaction outputs to extract some info required\n        // for further processing.\n        RedemptionTxOutputsInfo memory outputsInfo = processRedemptionTxOutputs(\n            redemptionTx.outputVector,\n            walletPubKeyHash\n        );\n\n        if (outputsInfo.changeValue > 0) {\n            // If the change value is grater than zero, it means the change\n            // output exists and can be used as new wallet's main UTXO.\n            wallet.mainUtxoHash = keccak256(\n                abi.encodePacked(\n                    redemptionTxHash,\n                    outputsInfo.changeIndex,\n                    outputsInfo.changeValue\n                )\n            );\n        } else {\n            // If the change value is zero, it means the change output doesn't\n            // exists and no funds left on the wallet. Delete the main UTXO\n            // for that wallet to represent that state in a proper way.\n            delete wallet.mainUtxoHash;\n        }\n\n        wallet.pendingRedemptionsValue -= outputsInfo.totalBurnableValue;\n\n        emit RedemptionsCompleted(walletPubKeyHash, redemptionTxHash);\n\n        self.bank.decreaseBalance(outputsInfo.totalBurnableValue);\n        self.bank.transferBalance(self.treasury, outputsInfo.totalTreasuryFee);\n    }\n\n    /// @notice Checks whether an outbound Bitcoin transaction performed from\n    ///         the given wallet has an input vector that contains a single\n    ///         input referring to the wallet's main UTXO. Marks that main UTXO\n    ///         as correctly spent if the validation succeeds. Reverts otherwise.\n    ///         There are two outbound transactions from a wallet possible: a\n    ///         redemption transaction or a moving funds to another wallet\n    ///         transaction.\n    /// @param walletOutboundTxInputVector Bitcoin outbound transaction's input\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVin` function\n    ///        before it is passed here\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain.\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the outbound transaction.\n    function processWalletOutboundTxInput(\n        bytes memory walletOutboundTxInputVector,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes20 walletPubKeyHash\n    ) internal {\n        // Assert that main UTXO for passed wallet exists in storage.\n        bytes32 mainUtxoHash = wallets\n            .registeredWallets[walletPubKeyHash]\n            .mainUtxoHash;\n        require(mainUtxoHash != bytes32(0), \"No main UTXO for given wallet\");\n\n        // Assert that passed main UTXO parameter is the same as in storage and\n        // can be used for further processing.\n        require(\n            keccak256(\n                abi.encodePacked(\n                    mainUtxo.txHash,\n                    mainUtxo.txOutputIndex,\n                    mainUtxo.txOutputValue\n                )\n            ) == mainUtxoHash,\n            \"Invalid main UTXO data\"\n        );\n\n        // Assert that the single outbound transaction input actually\n        // refers to the wallet's main UTXO.\n        (\n            bytes32 outpointTxHash,\n            uint32 outpointIndex\n        ) = parseWalletOutboundTxInput(walletOutboundTxInputVector);\n        require(\n            mainUtxo.txHash == outpointTxHash &&\n                mainUtxo.txOutputIndex == outpointIndex,\n            \"Outbound transaction input must point to the wallet's main UTXO\"\n        );\n\n        // Main UTXO used as an input, mark it as spent.\n        self.spentMainUTXOs[\n            uint256(\n                keccak256(\n                    abi.encodePacked(mainUtxo.txHash, mainUtxo.txOutputIndex)\n                )\n            )\n        ] = true;\n    }\n\n    /// @notice Parses the input vector of an outbound Bitcoin transaction\n    ///         performed from the given wallet. It extracts the single input\n    ///         then the transaction hash and output index from its outpoint.\n    ///         There are two outbound transactions from a wallet possible: a\n    ///         redemption transaction or a moving funds to another wallet\n    ///         transaction.\n    /// @param walletOutboundTxInputVector Bitcoin outbound transaction input\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVin` function\n    ///        before it is passed here\n    /// @return outpointTxHash 32-byte hash of the Bitcoin transaction which is\n    ///         pointed in the input's outpoint.\n    /// @return outpointIndex 4-byte index of the Bitcoin transaction output\n    ///         which is pointed in the input's outpoint.\n    function parseWalletOutboundTxInput(\n        bytes memory walletOutboundTxInputVector\n    ) internal pure returns (bytes32 outpointTxHash, uint32 outpointIndex) {\n        // To determine the total number of Bitcoin transaction inputs,\n        // we need to parse the compactSize uint (VarInt) the input vector is\n        // prepended by. That compactSize uint encodes the number of vector\n        // elements using the format presented in:\n        // https://developer.bitcoin.org/reference/transactions.html#compactsize-unsigned-integers\n        // We don't need asserting the compactSize uint is parseable since it\n        // was already checked during `validateVin` validation.\n        // See `BitcoinTx.inputVector` docs for more details.\n        (, uint256 inputsCount) = walletOutboundTxInputVector.parseVarInt();\n        require(\n            inputsCount == 1,\n            \"Outbound transaction must have a single input\"\n        );\n\n        bytes memory input = walletOutboundTxInputVector.extractInputAtIndex(0);\n\n        outpointTxHash = input.extractInputTxIdLE();\n\n        outpointIndex = BTCUtils.reverseUint32(\n            uint32(input.extractTxIndexLE())\n        );\n\n        // There is only one input in the transaction. Input has an outpoint\n        // field that is a reference to the transaction being spent (see\n        // `BitcoinTx` docs). The outpoint contains the hash of the transaction\n        // to spend (`outpointTxHash`) and the index of the specific output\n        // from that transaction (`outpointIndex`).\n        return (outpointTxHash, outpointIndex);\n    }\n\n    /// @notice Processes the Bitcoin redemption transaction output vector.\n    ///         It extracts each output and tries to identify it as a pending\n    ///         redemption request, reported timed out request, or change.\n    ///         Reverts if one of the outputs cannot be recognized properly.\n    ///         This function also marks each request as processed by removing\n    ///         them from `pendingRedemptions` mapping.\n    /// @param redemptionTxOutputVector Bitcoin redemption transaction output\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVout` function\n    ///        before it is passed here\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction.\n    /// @return info Outcomes of the processing.\n    function processRedemptionTxOutputs(\n        bytes memory redemptionTxOutputVector,\n        bytes20 walletPubKeyHash\n    ) internal returns (RedemptionTxOutputsInfo memory info) {\n        // Determining the total number of redemption transaction outputs in\n        // the same way as for number of inputs. See `BitcoinTx.outputVector`\n        // docs for more details.\n        (\n            uint256 outputsCompactSizeUintLength,\n            uint256 outputsCount\n        ) = redemptionTxOutputVector.parseVarInt();\n\n        // To determine the first output starting index, we must jump over\n        // the compactSize uint which prepends the output vector. One byte\n        // must be added because `BtcUtils.parseVarInt` does not include\n        // compactSize uint tag in the returned length.\n        //\n        // For >= 0 && <= 252, `BTCUtils.determineVarIntDataLengthAt`\n        // returns `0`, so we jump over one byte of compactSize uint.\n        //\n        // For >= 253 && <= 0xffff there is `0xfd` tag,\n        // `BTCUtils.determineVarIntDataLengthAt` returns `2` (no\n        // tag byte included) so we need to jump over 1+2 bytes of\n        // compactSize uint.\n        //\n        // Please refer `BTCUtils` library and compactSize uint\n        // docs in `BitcoinTx` library for more details.\n        uint256 outputStartingIndex = 1 + outputsCompactSizeUintLength;\n\n        // Calculate the keccak256 for two possible wallet's P2PKH or P2WPKH\n        // scripts that can be used to lock the change. This is done upfront to\n        // save on gas. Both scripts have a strict format defined by Bitcoin.\n        //\n        // The P2PKH script has the byte format: <0x1976a914> <20-byte PKH> <0x88ac>.\n        // According to https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n        // - 0x19: Byte length of the entire script\n        // - 0x76: OP_DUP\n        // - 0xa9: OP_HASH160\n        // - 0x14: Byte length of the public key hash\n        // - 0x88: OP_EQUALVERIFY\n        // - 0xac: OP_CHECKSIG\n        // which matches the P2PKH structure as per:\n        // https://en.bitcoin.it/wiki/Transaction#Pay-to-PubkeyHash\n        bytes32 walletP2PKHScriptKeccak = keccak256(\n            abi.encodePacked(hex\"1976a914\", walletPubKeyHash, hex\"88ac\")\n        );\n        // The P2WPKH script has the byte format: <0x160014> <20-byte PKH>.\n        // According to https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n        // - 0x16: Byte length of the entire script\n        // - 0x00: OP_0\n        // - 0x14: Byte length of the public key hash\n        // which matches the P2WPKH structure as per:\n        // https://github.com/bitcoin/bips/blob/master/bip-0141.mediawiki#P2WPKH\n        bytes32 walletP2WPKHScriptKeccak = keccak256(\n            abi.encodePacked(hex\"160014\", walletPubKeyHash)\n        );\n\n        return\n            processRedemptionTxOutputs(\n                redemptionTxOutputVector,\n                walletPubKeyHash,\n                RedemptionTxOutputsProcessingInfo(\n                    outputStartingIndex,\n                    outputsCount,\n                    walletP2PKHScriptKeccak,\n                    walletP2WPKHScriptKeccak\n                )\n            );\n    }\n\n    /// @notice Processes all outputs from the redemption transaction. Tries to\n    ///         identify output as a change output, pending redemption request\n    //          or reported redemption. Reverts if one of the outputs cannot be\n    ///         recognized properly. Marks each request as processed by removing\n    ///         them from `pendingRedemptions` mapping.\n    /// @param redemptionTxOutputVector Bitcoin redemption transaction output\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVout` function\n    ///        before it is passed here\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction.\n    /// @param processInfo RedemptionTxOutputsProcessingInfo identifying output\n    ///        starting index, the number of outputs and possible wallet change\n    ///        P2PKH and P2WPKH scripts.\n    function processRedemptionTxOutputs(\n        bytes memory redemptionTxOutputVector,\n        bytes20 walletPubKeyHash,\n        RedemptionTxOutputsProcessingInfo memory processInfo\n    ) internal returns (RedemptionTxOutputsInfo memory resultInfo) {\n        // Helper variable that counts the number of processed redemption\n        // outputs. Redemptions can be either pending or reported as timed out.\n        // TODO: Revisit the approach with redemptions count according to\n        //       https://github.com/keep-network/tbtc-v2/pull/128#discussion_r808237765\n        uint256 processedRedemptionsCount = 0;\n\n        // Outputs processing loop.\n        for (uint256 i = 0; i < processInfo.outputsCount; i++) {\n            // TODO: Check if we can optimize gas costs by adding\n            //       `extractValueAt` and `extractHashAt` in `bitcoin-spv-sol`\n            //       in order to avoid allocating bytes in memory.\n            uint256 outputLength = redemptionTxOutputVector\n                .determineOutputLengthAt(processInfo.outputStartingIndex);\n            bytes memory output = redemptionTxOutputVector.slice(\n                processInfo.outputStartingIndex,\n                outputLength\n            );\n\n            // Extract the value from given output.\n            uint64 outputValue = output.extractValue();\n            // The output consists of an 8-byte value and a variable length\n            // script. To extract that script we slice the output starting from\n            // 9th byte until the end.\n            bytes memory outputScript = output.slice(8, output.length - 8);\n\n            if (\n                resultInfo.changeValue == 0 &&\n                (keccak256(outputScript) ==\n                    processInfo.walletP2PKHScriptKeccak ||\n                    keccak256(outputScript) ==\n                    processInfo.walletP2WPKHScriptKeccak) &&\n                outputValue > 0\n            ) {\n                // If we entered here, that means the change output with a\n                // proper non-zero value was found.\n                resultInfo.changeIndex = uint32(i);\n                resultInfo.changeValue = outputValue;\n            } else {\n                // If we entered here, that the means the given output is\n                // supposed to represent a redemption.\n                (\n                    uint64 burnableValue,\n                    uint64 treasuryFee\n                ) = processNonChangeRedemptionTxOutput(\n                        walletPubKeyHash,\n                        outputScript,\n                        outputValue\n                    );\n                resultInfo.totalBurnableValue += burnableValue;\n                resultInfo.totalTreasuryFee += treasuryFee;\n                processedRedemptionsCount++;\n            }\n\n            // Make the `outputStartingIndex` pointing to the next output by\n            // increasing it by current output's length.\n            processInfo.outputStartingIndex += outputLength;\n        }\n\n        // Protect against the cases when there is only a single change output\n        // referring back to the wallet PKH and just burning main UTXO value\n        // for transaction fees.\n        require(\n            processedRedemptionsCount > 0,\n            \"Redemption transaction must process at least one redemption\"\n        );\n    }\n\n    /// @notice Processes a single redemption transaction output. Tries to\n    ///         identify output as a pending redemption request or reported\n    ///         redemption timeout. Output script passed to this function must\n    ///         not be the change output. Such output needs to be identified\n    ///         separately before calling this function.\n    ///         Reverts if output is neither requested pending redemption nor\n    ///         requested and reported timed-out redemption.\n    ///         This function also marks each pending request as processed by\n    ///         removing it from `pendingRedemptions` mapping.\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    //         HASH160 over the compressed ECDSA public key) of the wallet which\n    ///        performed the redemption transaction.\n    /// @param outputScript Non-change output script to be processed\n    /// @param outputValue Value of the output being processed\n    /// @return burnableValue The value burnable as a result of processing this\n    ///         single redemption output. This value needs to be summed up with\n    ///         burnable values of all other outputs to evaluate total burnable\n    ///         value for the entire redemption transaction. This value is 0\n    ///         for a timed-out redemption request.\n    /// @return treasuryFee The treasury fee from this single redemption output.\n    ///         This value needs to be summed up with treasury fees of all other\n    ///         outputs to evaluate the total treasury fee for the entire\n    ///         redemption transaction. This value is 0 for a timed-out\n    ///         redemption request.\n    function processNonChangeRedemptionTxOutput(\n        bytes20 walletPubKeyHash,\n        bytes memory outputScript,\n        uint64 outputValue\n    ) internal returns (uint64 burnableValue, uint64 treasuryFee) {\n        // This function should be called only if the given output is\n        // supposed to represent a redemption. Build the redemption key\n        // to perform that check.\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, outputScript))\n        );\n\n        if (pendingRedemptions[redemptionKey].requestedAt != 0) {\n            // If we entered here, that means the output was identified\n            // as a pending redemption request.\n            RedemptionRequest storage request = pendingRedemptions[\n                redemptionKey\n            ];\n            // Compute the request's redeemable amount as the requested\n            // amount reduced by the treasury fee. The request's\n            // minimal amount is then the redeemable amount reduced by\n            // the maximum transaction fee.\n            uint64 redeemableAmount = request.requestedAmount -\n                request.treasuryFee;\n            // Output value must fit between the request's redeemable\n            // and minimal amounts to be deemed valid.\n            require(\n                redeemableAmount - request.txMaxFee <= outputValue &&\n                    outputValue <= redeemableAmount,\n                \"Output value is not within the acceptable range of the pending request\"\n            );\n            // Add the redeemable amount to the total burnable value\n            // the Bridge will use to decrease its balance in the Bank.\n            burnableValue = redeemableAmount;\n            // Add the request's treasury fee to the total treasury fee\n            // value the Bridge will transfer to the treasury.\n            treasuryFee = request.treasuryFee;\n            // Request was properly handled so remove its redemption\n            // key from the mapping to make it reusable for further\n            // requests.\n            delete pendingRedemptions[redemptionKey];\n        } else {\n            // If we entered here, the output is not a redemption\n            // request but there is still a chance the given output is\n            // related to a reported timed out redemption request.\n            // If so, check if the output value matches the request\n            // amount to confirm this is an overdue request fulfillment\n            // then bypass this output and process the subsequent\n            // ones. That also means the wallet was already punished\n            // for the inactivity. Otherwise, just revert.\n            RedemptionRequest storage request = timedOutRedemptions[\n                redemptionKey\n            ];\n\n            require(\n                request.requestedAt != 0,\n                \"Output is a non-requested redemption\"\n            );\n\n            uint64 redeemableAmount = request.requestedAmount -\n                request.treasuryFee;\n\n            require(\n                redeemableAmount - request.txMaxFee <= outputValue &&\n                    outputValue <= redeemableAmount,\n                \"Output value is not within the acceptable range of the timed out request\"\n            );\n        }\n    }\n\n    /// @notice Notifies that there is a pending redemption request associated\n    ///         with the given wallet, that has timed out. The redemption\n    ///         request is identified by the key built as\n    ///         `keccak256(walletPubKeyHash | redeemerOutputScript)`.\n    ///         The results of calling this function: the pending redemptions\n    ///         value for the wallet will be decreased by the requested amount\n    ///         (minus treasury fee), the tokens taken from the redeemer on\n    ///         redemption request will be returned to the redeemer, the request\n    ///         will be moved from pending redemptions to timed-out redemptions.\n    ///         If the state of the wallet is `Live` or `MovingFunds`, the\n    ///         wallet operators will be slashed.\n    ///         Additionally, if the state of wallet is `Live`, the wallet will\n    ///         be closed or marked as `MovingFunds` (depending on the presence\n    ///         or absence of the wallet's main UTXO) and the wallet will no\n    ///         longer be marked as the active wallet (if it was marked as such).\n    /// @param walletPubKeyHash 20-byte public key hash of the wallet\n    /// @param redeemerOutputScript  The redeemer's length-prefixed output\n    ///        script (P2PKH, P2WPKH, P2SH or P2WSH)\n    /// @dev Requirements:\n    ///      - The redemption request identified by `walletPubKeyHash` and\n    ///        `redeemerOutputScript` must exist\n    ///      - The amount of time defined by `redemptionTimeout` must have\n    ///        passed since the redemption was requested (the request must be\n    ///        timed-out).\n    function notifyRedemptionTimeout(\n        bytes20 walletPubKeyHash,\n        bytes calldata redeemerOutputScript\n    ) external {\n        uint256 redemptionKey = uint256(\n            keccak256(abi.encodePacked(walletPubKeyHash, redeemerOutputScript))\n        );\n        RedemptionRequest memory request = pendingRedemptions[redemptionKey];\n\n        require(request.requestedAt > 0, \"Redemption request does not exist\");\n        require(\n            /* solhint-disable-next-line not-rely-on-time */\n            request.requestedAt + redemptionTimeout < block.timestamp,\n            \"Redemption request has not timed out\"\n        );\n\n        // Update the wallet's pending redemptions value\n        Wallets.Wallet storage wallet = wallets.registeredWallets[\n            walletPubKeyHash\n        ];\n        wallet.pendingRedemptionsValue -=\n            request.requestedAmount -\n            request.treasuryFee;\n\n        require(\n            // TODO: Allow the wallets in `Closing` state when the state is added\n            wallet.state == Wallets.WalletState.Live ||\n                wallet.state == Wallets.WalletState.MovingFunds ||\n                wallet.state == Wallets.WalletState.Terminated,\n            \"The wallet must be in Live, MovingFunds or Terminated state\"\n        );\n\n        // It is worth noting that there is no need to check if\n        // `timedOutRedemption` mapping already contains the given redemption\n        // key. There is no possibility to re-use a key of a reported timed-out\n        // redemption because the wallet responsible for causing the timeout is\n        // moved to a state that prevents it to receive new redemption requests.\n\n        // Move the redemption from pending redemptions to timed-out redemptions\n        timedOutRedemptions[redemptionKey] = request;\n        delete pendingRedemptions[redemptionKey];\n\n        if (\n            wallet.state == Wallets.WalletState.Live ||\n            wallet.state == Wallets.WalletState.MovingFunds\n        ) {\n            // Propagate timeout consequences to the wallet\n            wallets.notifyRedemptionTimedOut(walletPubKeyHash);\n        }\n\n        emit RedemptionTimedOut(walletPubKeyHash, redeemerOutputScript);\n\n        // Return the requested amount of tokens to the redeemer\n        self.bank.transferBalance(request.redeemer, request.requestedAmount);\n    }\n\n    /// @notice Used by the wallet to prove the BTC moving funds transaction\n    ///         and to make the necessary state changes. Moving funds is only\n    ///         accepted if it satisfies SPV proof.\n    ///\n    ///         The function validates the moving funds transaction structure\n    ///         by checking if it actually spends the main UTXO of the declared\n    ///         wallet and locks the value on the pre-committed target wallets\n    ///         using a reasonable transaction fee. If all preconditions are\n    ///         met, this functions closes the source wallet.\n    ///\n    ///         It is possible to prove the given moving funds transaction only\n    ///         one time.\n    /// @param movingFundsTx Bitcoin moving funds transaction data\n    /// @param movingFundsProof Bitcoin moving funds proof data\n    /// @param mainUtxo Data of the wallet's main UTXO, as currently known on\n    ///        the Ethereum chain\n    /// @param walletPubKeyHash 20-byte public key hash (computed using Bitcoin\n    ///        HASH160 over the compressed ECDSA public key) of the wallet\n    ///        which performed the moving funds transaction\n    /// @dev Requirements:\n    ///      - `movingFundsTx` components must match the expected structure. See\n    ///        `BitcoinTx.Info` docs for reference. Their values must exactly\n    ///        correspond to appropriate Bitcoin transaction fields to produce\n    ///        a provable transaction hash.\n    ///      - The `movingFundsTx` should represent a Bitcoin transaction with\n    ///        exactly 1 input that refers to the wallet's main UTXO. That\n    ///        transaction should have 1..n outputs corresponding to the\n    ///        pre-committed target wallets. Outputs must be ordered in the\n    ///        same way as their corresponding target wallets are ordered\n    ///        within the target wallets commitment.\n    ///      - `movingFundsProof` components must match the expected structure.\n    ///        See `BitcoinTx.Proof` docs for reference. The `bitcoinHeaders`\n    ///        field must contain a valid number of block headers, not less\n    ///        than the `txProofDifficultyFactor` contract constant.\n    ///      - `mainUtxo` components must point to the recent main UTXO\n    ///        of the given wallet, as currently known on the Ethereum chain.\n    ///        Additionally, the recent main UTXO on Ethereum must be set.\n    ///      - `walletPubKeyHash` must be connected with the main UTXO used\n    ///        as transaction single input.\n    ///      - The wallet that `walletPubKeyHash` points to must be in the\n    ///        MovingFunds state.\n    ///      - The target wallets commitment must be submitted by the wallet\n    ///        that `walletPubKeyHash` points to.\n    ///      - The total Bitcoin transaction fee must be lesser or equal\n    ///        to `movingFundsTxMaxTotalFee` governable parameter.\n    function submitMovingFundsProof(\n        BitcoinTx.Info calldata movingFundsTx,\n        BitcoinTx.Proof calldata movingFundsProof,\n        BitcoinTx.UTXO calldata mainUtxo,\n        bytes20 walletPubKeyHash\n    ) external {\n        // The actual transaction proof is performed here. After that point, we\n        // can assume the transaction happened on Bitcoin chain and has\n        // a sufficient number of confirmations as determined by\n        // `txProofDifficultyFactor` constant.\n        bytes32 movingFundsTxHash = BitcoinTx.validateProof(\n            movingFundsTx,\n            movingFundsProof,\n            self.proofDifficultyContext()\n        );\n\n        // Process the moving funds transaction input. Specifically, check if\n        // it refers to the expected wallet's main UTXO.\n        processWalletOutboundTxInput(\n            movingFundsTx.inputVector,\n            mainUtxo,\n            walletPubKeyHash\n        );\n\n        (\n            bytes32 targetWalletsHash,\n            uint256 outputsTotalValue\n        ) = processMovingFundsTxOutputs(movingFundsTx.outputVector);\n\n        require(\n            mainUtxo.txOutputValue - outputsTotalValue <=\n                movingFundsTxMaxTotalFee,\n            \"Transaction fee is too high\"\n        );\n\n        wallets.notifyFundsMoved(walletPubKeyHash, targetWalletsHash);\n\n        emit MovingFundsCompleted(walletPubKeyHash, movingFundsTxHash);\n    }\n\n    /// @notice Processes the moving funds Bitcoin transaction output vector\n    ///         and extracts information required for further processing.\n    /// @param movingFundsTxOutputVector Bitcoin moving funds transaction output\n    ///        vector. This function assumes vector's structure is valid so it\n    ///        must be validated using e.g. `BTCUtils.validateVout` function\n    ///        before it is passed here\n    /// @return targetWalletsHash keccak256 hash over the list of actual\n    ///         target wallets used in the transaction.\n    /// @return outputsTotalValue Sum of all outputs values.\n    /// @dev Requirements:\n    ///      - The `movingFundsTxOutputVector` must be parseable, i.e. must\n    ///        be validated by the caller as stated in their parameter doc.\n    ///      - Each output must refer to a 20-byte public key hash.\n    ///      - The total outputs value must be evenly divided over all outputs.\n    function processMovingFundsTxOutputs(bytes memory movingFundsTxOutputVector)\n        internal\n        view\n        returns (bytes32 targetWalletsHash, uint256 outputsTotalValue)\n    {\n        // Determining the total number of Bitcoin transaction outputs in\n        // the same way as for number of inputs. See `BitcoinTx.outputVector`\n        // docs for more details.\n        (\n            uint256 outputsCompactSizeUintLength,\n            uint256 outputsCount\n        ) = movingFundsTxOutputVector.parseVarInt();\n\n        // To determine the first output starting index, we must jump over\n        // the compactSize uint which prepends the output vector. One byte\n        // must be added because `BtcUtils.parseVarInt` does not include\n        // compactSize uint tag in the returned length.\n        //\n        // For >= 0 && <= 252, `BTCUtils.determineVarIntDataLengthAt`\n        // returns `0`, so we jump over one byte of compactSize uint.\n        //\n        // For >= 253 && <= 0xffff there is `0xfd` tag,\n        // `BTCUtils.determineVarIntDataLengthAt` returns `2` (no\n        // tag byte included) so we need to jump over 1+2 bytes of\n        // compactSize uint.\n        //\n        // Please refer `BTCUtils` library and compactSize uint\n        // docs in `BitcoinTx` library for more details.\n        uint256 outputStartingIndex = 1 + outputsCompactSizeUintLength;\n\n        bytes20[] memory targetWallets = new bytes20[](outputsCount);\n        uint64[] memory outputsValues = new uint64[](outputsCount);\n\n        // Outputs processing loop.\n        for (uint256 i = 0; i < outputsCount; i++) {\n            uint256 outputLength = movingFundsTxOutputVector\n                .determineOutputLengthAt(outputStartingIndex);\n\n            bytes memory output = movingFundsTxOutputVector.slice(\n                outputStartingIndex,\n                outputLength\n            );\n\n            // Extract the output script payload.\n            bytes memory targetWalletPubKeyHashBytes = output.extractHash();\n            // Output script payload must refer to a known wallet public key\n            // hash which is always 20-byte.\n            require(\n                targetWalletPubKeyHashBytes.length == 20,\n                \"Target wallet public key hash must have 20 bytes\"\n            );\n\n            bytes20 targetWalletPubKeyHash = targetWalletPubKeyHashBytes\n                .slice20(0);\n\n            // The next step is making sure that the 20-byte public key hash\n            // is actually used in the right context of a P2PKH or P2WPKH\n            // output. To do so, we must extract the full script from the output\n            // and compare with the expected P2PKH and P2WPKH scripts\n            // referring to that 20-byte public key hash. The output consists\n            // of an 8-byte value and a variable length script. To extract the\n            // script we slice the output starting from 9th byte until the end.\n            bytes32 outputScriptKeccak = keccak256(\n                output.slice(8, output.length - 8)\n            );\n            // Build the expected P2PKH script which has the following byte\n            // format: <0x1976a914> <20-byte PKH> <0x88ac>. According to\n            // https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n            // - 0x19: Byte length of the entire script\n            // - 0x76: OP_DUP\n            // - 0xa9: OP_HASH160\n            // - 0x14: Byte length of the public key hash\n            // - 0x88: OP_EQUALVERIFY\n            // - 0xac: OP_CHECKSIG\n            // which matches the P2PKH structure as per:\n            // https://en.bitcoin.it/wiki/Transaction#Pay-to-PubkeyHash\n            bytes32 targetWalletP2PKHScriptKeccak = keccak256(\n                abi.encodePacked(\n                    hex\"1976a914\",\n                    targetWalletPubKeyHash,\n                    hex\"88ac\"\n                )\n            );\n            // Build the expected P2WPKH script which has the following format:\n            // <0x160014> <20-byte PKH>. According to\n            // https://en.bitcoin.it/wiki/Script#Opcodes this translates to:\n            // - 0x16: Byte length of the entire script\n            // - 0x00: OP_0\n            // - 0x14: Byte length of the public key hash\n            // which matches the P2WPKH structure as per:\n            // https://github.com/bitcoin/bips/blob/master/bip-0141.mediawiki#P2WPKH\n            bytes32 targetWalletP2WPKHScriptKeccak = keccak256(\n                abi.encodePacked(hex\"160014\", targetWalletPubKeyHash)\n            );\n            // Make sure the actual output script matches either the P2PKH\n            // or P2WPKH format.\n            require(\n                outputScriptKeccak == targetWalletP2PKHScriptKeccak ||\n                    outputScriptKeccak == targetWalletP2WPKHScriptKeccak,\n                \"Output must be P2PKH or P2WPKH\"\n            );\n\n            // Add the wallet public key hash to the list that will be used\n            // to build the result list hash. There is no need to check if\n            // given output is a change here because the actual target wallet\n            // list must be exactly the same as the pre-committed target wallet\n            // list which is guaranteed to be valid.\n            targetWallets[i] = targetWalletPubKeyHash;\n\n            // Extract the value from given output.\n            outputsValues[i] = output.extractValue();\n            outputsTotalValue += outputsValues[i];\n\n            // Make the `outputStartingIndex` pointing to the next output by\n            // increasing it by current output's length.\n            outputStartingIndex += outputLength;\n        }\n\n        // Compute the indivisible remainder that remains after dividing the\n        // outputs total value over all outputs evenly.\n        uint256 outputsTotalValueRemainder = outputsTotalValue % outputsCount;\n        // Compute the minimum allowed output value by dividing the outputs\n        // total value (reduced by the remainder) by the number of outputs.\n        uint256 minOutputValue = (outputsTotalValue -\n            outputsTotalValueRemainder) / outputsCount;\n        // Maximum possible value is the minimum value with the remainder included.\n        uint256 maxOutputValue = minOutputValue + outputsTotalValueRemainder;\n\n        for (uint256 i = 0; i < outputsCount; i++) {\n            require(\n                minOutputValue <= outputsValues[i] &&\n                    outputsValues[i] <= maxOutputValue,\n                \"Transaction amount is not distributed evenly\"\n            );\n        }\n\n        targetWalletsHash = keccak256(abi.encodePacked(targetWallets));\n\n        return (targetWalletsHash, outputsTotalValue);\n    }\n\n    /// @return bank Address of the Bank the Bridge belongs to.\n    /// @return relay Address of the Bitcoin relay providing the current Bitcoin\n    ///         network difficulty.\n    function getContracts() external view returns (Bank bank, IRelay relay) {\n        bank = self.bank;\n        relay = self.relay;\n    }\n\n    /// @notice Returns the current values of Bridge deposit parameters.\n    /// @return depositDustThreshold The minimal amount that can be requested\n    ///         to deposit. Value of this parameter must take into account the\n    ///         value of `depositTreasuryFeeDivisor` and `depositTxMaxFee`\n    ///         parameters in order to make requests that can incur the\n    ///         treasury and transaction fee and still satisfy the depositor.\n    /// @return depositTreasuryFeeDivisor Divisor used to compute the treasury\n    ///         fee taken from each deposit and transferred to the treasury upon\n    ///         sweep proof submission. That fee is computed as follows:\n    ///         `treasuryFee = depositedAmount / depositTreasuryFeeDivisor`\n    ///         For example, if the treasury fee needs to be 2% of each deposit,\n    ///         the `depositTreasuryFeeDivisor` should be set to `50`\n    ///         because `1/50 = 0.02 = 2%`.\n    /// @return depositTxMaxFee Maximum amount of BTC transaction fee that can\n    ///         be incurred by each swept deposit being part of the given sweep\n    ///         transaction. If the maximum BTC transaction fee is exceeded,\n    ///         such transaction is considered a fraud.\n    /// @return treasury Address where the deposit treasury fees will be\n    ///         sent to. Treasury takes part in the operators rewarding process.\n    /// @return txProofDifficultyFactor The number of confirmations on the\n    ///         Bitcoin chain required to successfully evaluate an SPV proof.\n    function depositParameters()\n        external\n        view\n        returns (\n            uint64 depositDustThreshold,\n            uint64 depositTreasuryFeeDivisor,\n            uint64 depositTxMaxFee,\n            address treasury,\n            uint256 txProofDifficultyFactor\n        )\n    {\n        depositDustThreshold = self.depositDustThreshold;\n        depositTreasuryFeeDivisor = self.depositTreasuryFeeDivisor;\n        depositTxMaxFee = self.depositTxMaxFee;\n        treasury = self.treasury;\n        txProofDifficultyFactor = self.txProofDifficultyFactor;\n    }\n\n    /// @notice Indicates if the vault with the given address is trusted or not.\n    ///         Depositors can route their revealed deposits only to trusted\n    ///         vaults and have trusted vaults notified about new deposits as\n    ///         soon as these deposits get swept. Vaults not trusted by the\n    ///         Bridge can still be used by Bank balance owners on their own\n    ///         responsibility - anyone can approve their Bank balance to any\n    ///         address.\n    function isVaultTrusted(address vault) external view returns (bool) {\n        return self.isVaultTrusted[vault];\n    }\n\n    /// @notice Collection of all revealed deposits indexed by\n    ///         keccak256(fundingTxHash | fundingOutputIndex).\n    ///         The fundingTxHash is bytes32 (ordered as in Bitcoin internally)\n    ///         and fundingOutputIndex an uint32. This mapping may contain valid\n    ///         and invalid deposits and the wallet is responsible for\n    ///         validating them before attempting to execute a sweep.\n    function deposits(uint256 depositKey)\n        external\n        view\n        returns (Deposit.Request memory)\n    {\n        // TODO: rename to getDeposit?\n        return self.deposits[depositKey];\n    }\n\n    /// @notice Collection of main UTXOs that are honestly spent indexed by\n    ///         keccak256(fundingTxHash | fundingOutputIndex). The fundingTxHash\n    ///         is bytes32 (ordered as in Bitcoin internally) and\n    ///         fundingOutputIndex an uint32. A main UTXO is considered honestly\n    ///         spent if it was used as an input of a transaction that have been\n    ///         proven in the Bridge.\n    function spentMainUTXOs(uint256 utxoKey) external view returns (bool) {\n        return self.spentMainUTXOs[utxoKey];\n    }\n}\n"
     },
     "@keep-network/ecdsa/contracts/api/IWalletOwner.sol": {
       "content": "// SPDX-License-Identifier: MIT\n//\n// ▓▓▌ ▓▓ ▐▓▓ ▓▓▓▓▓▓▓▓▓▓▌▐▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▄\n// ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▌▐▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓\n//   ▓▓▓▓▓▓    ▓▓▓▓▓▓▓▀    ▐▓▓▓▓▓▓    ▐▓▓▓▓▓   ▓▓▓▓▓▓     ▓▓▓▓▓   ▐▓▓▓▓▓▌   ▐▓▓▓▓▓▓\n//   ▓▓▓▓▓▓▄▄▓▓▓▓▓▓▓▀      ▐▓▓▓▓▓▓▄▄▄▄         ▓▓▓▓▓▓▄▄▄▄         ▐▓▓▓▓▓▌   ▐▓▓▓▓▓▓\n//   ▓▓▓▓▓▓▓▓▓▓▓▓▓▀        ▐▓▓▓▓▓▓▓▓▓▓         ▓▓▓▓▓▓▓▓▓▓         ▐▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓\n//   ▓▓▓▓▓▓▀▀▓▓▓▓▓▓▄       ▐▓▓▓▓▓▓▀▀▀▀         ▓▓▓▓▓▓▀▀▀▀         ▐▓▓▓▓▓▓▓▓▓▓▓▓▓▓▀\n//   ▓▓▓▓▓▓   ▀▓▓▓▓▓▓▄     ▐▓▓▓▓▓▓     ▓▓▓▓▓   ▓▓▓▓▓▓     ▓▓▓▓▓   ▐▓▓▓▓▓▌\n// ▓▓▓▓▓▓▓▓▓▓ █▓▓▓▓▓▓▓▓▓ ▐▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓  ▓▓▓▓▓▓▓▓▓▓\n// ▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓ ▐▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓  ▓▓▓▓▓▓▓▓▓▓\n//\n//                           Trust math, not hardware.\n\npragma solidity ^0.8.9;\n\ninterface IWalletOwner {\n    /// @notice Callback function executed once a new wallet is created.\n    /// @dev Should be callable only by the Wallet Registry.\n    /// @param walletID Wallet's unique identifier.\n    /// @param publicKeyY Wallet's public key's X coordinate.\n    /// @param publicKeyY Wallet's public key's Y coordinate.\n    function __ecdsaWalletCreatedCallback(\n        bytes32 walletID,\n        bytes32 publicKeyX,\n        bytes32 publicKeyY\n    ) external;\n\n    /// @notice Callback function executed once a wallet heartbeat failure\n    ///         is detected.\n    /// @dev Should be callable only by the Wallet Registry.\n    /// @param walletID Wallet's unique identifier.\n    /// @param publicKeyY Wallet's public key's X coordinate.\n    /// @param publicKeyY Wallet's public key's Y coordinate.\n    function __ecdsaWalletHeartbeatFailedCallback(\n        bytes32 walletID,\n        bytes32 publicKeyX,\n        bytes32 publicKeyY\n    ) external;\n}\n"

package/build/contracts/GovernanceUtils.sol/GovernanceUtils.dbg.json

@@ -1,4 +1,4 @@
 {
   "_format": "hh-sol-dbg-1",
-  "buildInfo": "../../build-info/dfec18186018062f79689469c73792f0.json"
+  "buildInfo": "../../build-info/a040597365d9af2d676169853eb58709.json"
 }

package/build/contracts/bank/Bank.sol/Bank.dbg.json

@@ -1,4 +1,4 @@
 {
   "_format": "hh-sol-dbg-1",
-  "buildInfo": "../../../build-info/dfec18186018062f79689469c73792f0.json"
+  "buildInfo": "../../../build-info/a040597365d9af2d676169853eb58709.json"
 }

package/build/contracts/bridge/BitcoinTx.sol/BitcoinTx.dbg.json

@@ -1,4 +1,4 @@
 {
   "_format": "hh-sol-dbg-1",
-  "buildInfo": "../../../build-info/dfec18186018062f79689469c73792f0.json"
+  "buildInfo": "../../../build-info/a040597365d9af2d676169853eb58709.json"
 }

package/build/contracts/bridge/Bridge.sol/Bridge.dbg.json

@@ -1,4 +1,4 @@
 {
   "_format": "hh-sol-dbg-1",
-  "buildInfo": "../../../build-info/dfec18186018062f79689469c73792f0.json"
+  "buildInfo": "../../../build-info/a040597365d9af2d676169853eb58709.json"
 }