@kaydash9999/banker-plugins 0.13.0 → 0.14.0

package/skills/tone-compact/scripts/tone-compact.mjs

@@ -0,0 +1,499 @@
+#!/usr/bin/env node
+/**
+ * tone-compact: keeps the compact Korean writing rules on or off across sessions.
+ *
+ *   node tone-compact.mjs on  --runtime claude|codex   save the rules where that runtime loads them
+ *   node tone-compact.mjs off --runtime claude|codex   take them out again
+ *   node tone-compact.mjs status                       say where they are on, for both runtimes
+ *
+ * The rules are the part of ../SKILL.md between the tone-compact:rules markers,
+ * so the text the skill applies in the session and the text later sessions load
+ * are the same.
+ *
+ * Claude Code loads every rules file under <config>/rules/ (<config> is
+ * $CLAUDE_CONFIG_DIR or ~/.claude) at session start and again after compaction.
+ * `on` writes banker-tone-compact.md there and `off` deletes it. A file at that
+ * name that does not start with banker's mark belongs to someone else and is
+ * left alone.
+ *
+ * Codex reads $CODEX_HOME/AGENTS.override.md when it holds any non-whitespace
+ * text and $CODEX_HOME/AGENTS.md otherwise (CODEX_HOME defaults to ~/.codex).
+ * `on` adds one marked block at the end of AGENTS.md, or of the override when
+ * the override has text of its own (a block alone there would hide AGENTS.md);
+ * `off` takes it out and gives back the bytes from before. The block sits inside
+ * OMX's USER:OMX:POLICY markers, the only part of a generated AGENTS.md that
+ * `omx setup --merge-agents` carries over; a plain `omx setup` with team mode on
+ * only refreshes the model table. `omx setup --force`, confirming its overwrite
+ * prompt, or a plain `omx setup` with team mode off replaces the file block and
+ * all; `on` then has to run again. Text other tools keep in these files is left
+ * alone, and the bytes from before each change are kept in
+ * <file>.tone-compact.bak. Markers count only as whole lines that open and close
+ * in turn; a marker quoted inside a sentence, or an end before a start, makes on
+ * and off refuse rather than guess where the block ends. So does a file that is
+ * not UTF-8 (CP949, UTF-16): written back as text it would lose its bytes.
+ *
+ * `off` never needs the rules, so it works even when SKILL.md cannot be read.
+ * Exit status 0 means done or already so; 1 means refused or a usage error, with
+ * nothing changed; 2 means an unexpected error stopped the command partway, so
+ * check `status`.
+ */
+import {
+  accessSync,
+  constants,
+  lstatSync,
+  mkdirSync,
+  readFileSync,
+  realpathSync,
+  renameSync,
+  rmSync,
+  statSync,
+  writeFileSync,
+} from "node:fs";
+import { homedir } from "node:os";
+import { dirname, join } from "node:path";
+import { fileURLToPath } from "node:url";
+
+const RULES_START = "<!-- tone-compact:rules:start -->";
+const RULES_END = "<!-- tone-compact:rules:end -->";
+// The Claude Code rules file starts with this mark; it is how off and on know the file is banker's.
+const OWNER_MARK = "<!-- banker tone-compact";
+const HEADER = `${OWNER_MARK}: banker 가 관리하는 파일입니다. 끄려면 tone-compact 에 off 를 실행하세요. -->`;
+const OPEN = "<!-- banker:tone-compact:start -->";
+const CLOSE = "<!-- banker:tone-compact:end -->";
+// OMX keeps only these regions when `omx setup` rewrites a generated AGENTS.md.
+const KEEP_OPEN = "<!-- USER:OMX:POLICY:START -->";
+const KEEP_CLOSE = "<!-- USER:OMX:POLICY:END -->";
+const MARKERS = [OPEN, CLOSE, KEEP_OPEN, KEEP_CLOSE, RULES_START, RULES_END];
+
+const DEFAULTS = {
+  claudeDir: process.env.CLAUDE_CONFIG_DIR || join(homedir(), ".claude"),
+  codexDir: process.env.CODEX_HOME || join(homedir(), ".codex"),
+  skillFile: fileURLToPath(new URL("../SKILL.md", import.meta.url)),
+};
+
+const count = (text, needle) => text.split(needle).length - 1;
+const lf = (text) => text.replace(/\r\n/g, "\n");
+const eolOf = (text) => (text.includes("\r\n") ? "\r\n" : "\n");
+const isDir = (path) => {
+  try {
+    return statSync(path).isDirectory();
+  } catch {
+    return false;
+  }
+};
+const isLink = (path) => {
+  try {
+    return lstatSync(path).isSymbolicLink();
+  } catch {
+    return false;
+  }
+};
+
+const UTF8 = new TextDecoder("utf-8", { fatal: true, ignoreBOM: true });
+
+// A file's bytes and text, null when there is no such file. text is null when
+// the bytes are not UTF-8, which callers refuse: decoding them would replace
+// them with U+FFFD for good. Any other read failure (permissions, a folder at
+// that name) is not "missing" and propagates.
+function readFile(path) {
+  let bytes;
+  try {
+    bytes = readFileSync(path);
+  } catch (e) {
+    if (e.code === "ENOENT" || e.code === "ENOTDIR") return null;
+    throw e;
+  }
+  try {
+    return { bytes, text: UTF8.decode(bytes) };
+  } catch {
+    return { bytes, text: null };
+  }
+}
+
+const done = (message) => ({ ok: true, message });
+const refuse = (message) => ({ ok: false, message });
+
+/** The rules: the text between the markers in SKILL.md, without the line breaks around it. */
+export function rulesOf(skillText) {
+  const text = lf(skillText);
+  const start = text.indexOf(RULES_START);
+  const end = text.indexOf(RULES_END);
+  if (count(text, RULES_START) !== 1 || count(text, RULES_END) !== 1 || end < start) {
+    throw new Error("SKILL.md 에서 규칙 구간(tone-compact:rules 표시)을 찾지 못했습니다");
+  }
+  const rules = text.slice(start + RULES_START.length, end).replace(/^\n+|\n+$/g, "");
+  if (rules === "" || MARKERS.some((m) => rules.includes(m))) {
+    throw new Error("SKILL.md 의 규칙 구간이 비었거나 관리 표시를 담고 있습니다");
+  }
+  return rules;
+}
+
+const loadRules = (o) => rulesOf(readFileSync(o.skillFile, "utf8"));
+
+// Replaces file through a fresh temp file ("wx") and a rename: a link planted at
+// either name is replaced rather than written through, and a write that fails
+// leaves the old file as it was.
+function writeFresh(file, data, mode = 0o644) {
+  const tmp = `${file}.${process.pid}.tmp`;
+  rmSync(tmp, { force: true });
+  try {
+    writeFileSync(tmp, data, { flag: "wx", mode });
+    renameSync(tmp, file);
+  } catch (e) {
+    rmSync(tmp, { force: true });
+    throw e;
+  }
+}
+
+const denied = (e) => e.code === "EACCES" || e.code === "EPERM" || e.code === "EROFS";
+
+// ---- Claude Code: one rules file that is banker's alone ----
+
+const claudeFile = (o) => join(o.claudeDir, "rules", "banker-tone-compact.md");
+const claudeText = (rules) => `${HEADER}\n${rules}\n`;
+
+// "off", "foreign" (not banker's file), or, when rules are given, "on" or
+// "stale" (an earlier version's rules); without rules a banker file is "ours".
+function claudeState(file, rules) {
+  if (file === null) return "off";
+  if (file.text === null) return "foreign";
+  const body = lf(file.text.replace(/^\uFEFF/, ""));
+  if (!body.startsWith(OWNER_MARK)) return "foreign";
+  if (rules === undefined) return "ours";
+  return body === claudeText(rules) ? "on" : "stale";
+}
+
+function claudeOn(o) {
+  const file = claudeFile(o);
+  if (!isDir(o.claudeDir)) return refuse(`Claude Code 설정 폴더가 없습니다: ${o.claudeDir}`);
+  const rules = loadRules(o);
+  const state = claudeState(readFile(file), rules);
+  if (state === "foreign") return refuse(`같은 이름의 다른 파일이 있어 그대로 두었습니다: ${file}`);
+  if (state === "on") return done(`Claude Code: 이미 켜져 있습니다 (변경 없음). ${file}`);
+  try {
+    mkdirSync(dirname(file), { recursive: true, mode: 0o755 });
+    writeFresh(file, claudeText(rules));
+  } catch (e) {
+    if (denied(e)) return refuse(`쓸 권한이 없어 켜지 못했습니다 (${e.code}): ${file}`);
+    throw e;
+  }
+  return done(
+    state === "stale"
+      ? `Claude Code: 규칙을 이 버전으로 바꿨습니다. ${file}`
+      : `Claude Code: 켰습니다. 다음 세션부터 자동 적용됩니다. ${file}`,
+  );
+}
+
+function claudeOff(o) {
+  const file = claudeFile(o);
+  const state = claudeState(readFile(file));
+  if (state === "off") return done("Claude Code: 이미 꺼져 있습니다 (변경 없음).");
+  if (state === "foreign") return refuse(`같은 이름의 다른 파일이 있어 그대로 두었습니다: ${file}`);
+  try {
+    rmSync(file);
+  } catch (e) {
+    if (denied(e)) return refuse(`지울 권한이 없어 끄지 못했습니다 (${e.code}): ${file}`);
+    throw e;
+  }
+  return done(`Claude Code: 껐습니다. 다음 세션부터 적용되지 않습니다. ${file}`);
+}
+
+// ---- Codex: one block in the global instructions file Codex reads ----
+
+const lineBare = (line) => line.replace(/\r?\n$/, "");
+// A line without its line break, and the first one without the byte order mark
+// an editor may put in front of it.
+const bareAt = (lines, i) => (i === 0 ? lineBare(lines[i]).replace(/^\uFEFF/, "") : lineBare(lines[i]));
+
+// One block's place in the text: [from, to) runs from its first line (the keep
+// marker when one wraps it directly) through the end of its last line; cut is
+// from minus the line break `on` puts before the block, and blankBefore says
+// whether that break makes a blank line of its own.
+function spanOf(lines, offsets, first, last) {
+  const wrapped =
+    first > 0 &&
+    last + 1 < lines.length &&
+    bareAt(lines, first - 1) === KEEP_OPEN &&
+    bareAt(lines, last + 1) === KEEP_CLOSE;
+  const top = wrapped ? first - 1 : first;
+  const bottom = wrapped ? last + 1 : last;
+  const before = top > 0 ? lines[top - 1] : "";
+  const joint = before.endsWith("\r\n") ? 2 : before.endsWith("\n") ? 1 : 0;
+  const blankBefore = before !== "" && lineBare(before) === "";
+  return { cut: offsets[top] - joint, from: offsets[top], to: offsets[bottom] + lines[bottom].length, blankBefore };
+}
+
+/**
+ * Where the tone-compact blocks sit in text, or null when the markers are not
+ * whole lines that open and close in turn. on and off refuse null, so a marker
+ * quoted inside a sentence can never make them cut the user's own text.
+ */
+export function blockSpans(text) {
+  const lines = text.split(/(?<=\n)/);
+  const offsets = [];
+  let at = 0;
+  for (const line of lines) {
+    offsets.push(at);
+    at += line.length;
+  }
+  const spans = [];
+  let open = -1;
+  for (let i = 0; i < lines.length; i++) {
+    const bare = bareAt(lines, i);
+    if (bare === OPEN && open === -1) open = i;
+    else if (bare === CLOSE && open !== -1) {
+      spans.push(spanOf(lines, offsets, open, i));
+      open = -1;
+    } else if (lines[i].includes(OPEN) || lines[i].includes(CLOSE)) return null;
+  }
+  return open === -1 ? spans : null;
+}
+
+// The text without its blocks: exactly what it was before `on` added them. The
+// line break `on` put in front goes with the block when the block ends the file
+// or has a blank line of its own in front; with other text after it, the break
+// stays, so the lines on either side never run together.
+function strip(text, spans) {
+  let out = "";
+  let at = 0;
+  for (const s of spans) {
+    const keepBreak = s.to < text.length && !s.blankBefore;
+    out += text.slice(at, keepBreak ? s.from : s.cut);
+    at = s.to;
+  }
+  return out + text.slice(at);
+}
+
+// Whether text holds anything but whitespace, the way Codex judges a file empty
+// (Rust's trim, which unlike JavaScript's keeps a byte order mark).
+const hasContent = (text) => /[^\t\n\v\f\r \u0085\u00a0\u1680\u2000-\u200a\u2028\u2029\u202f\u205f\u3000]/.test(text);
+
+// Both global instruction files with their bytes and text (null when absent;
+// text null when not UTF-8) and blocks (null when the markers do not pair up).
+// The block's place (target) is the override when the override has text of its
+// own, AGENTS.md otherwise: an override holding only the block would hide
+// AGENTS.md from Codex, which reads any override with non-whitespace text.
+function codexFiles(o) {
+  const read = (name) => {
+    const path = join(o.codexDir, name);
+    const file = readFile(path);
+    if (file === null) return { path, bytes: null, text: null, spans: [] };
+    return { path, ...file, spans: file.text === null ? null : blockSpans(file.text) };
+  };
+  const override = read("AGENTS.override.md");
+  const main = read("AGENTS.md");
+  const ownContent =
+    binary(override) ||
+    (override.text !== null && hasContent(override.spans === null ? override.text : strip(override.text, override.spans)));
+  const target = ownContent ? override : main;
+  return { target, other: target === override ? main : override, all: [override, main] };
+}
+
+const blockFor = (rules, eol) => [KEEP_OPEN, OPEN, ...rules.split("\n"), CLOSE, KEEP_CLOSE, ""].join(eol);
+const binary = (f) => f.bytes !== null && f.text === null;
+const unpaired = (f) => f.spans === null;
+const hasBlock = (f) => f.spans !== null && f.spans.length > 0;
+const stripped = (f) => (f.text === null ? "" : strip(f.text, f.spans));
+// A block's text compared without line-break style, a leading byte order mark
+// or the final line break, which editors add and drop.
+const normBlock = (text) => lf(text).replace(/^\uFEFF/, "").replace(/\n$/, "");
+// The block exactly as `on` writes it, and only once.
+const blockCurrent = (f, rules) =>
+  f.spans.length === 1 && normBlock(f.text.slice(f.spans[0].from, f.spans[0].to)) === normBlock(blockFor(rules, "\n"));
+
+// The text with the block at the end, one line break between them; an empty
+// file gets the block alone. strip() undoes exactly this.
+function withBlock(text, rules) {
+  const eol = eolOf(text);
+  return text === "" ? blockFor(rules, eol) : text + eol + blockFor(rules, eol);
+}
+
+// "off", "on", "stale", "misplaced" (only in AGENTS.md while Codex reads the
+// override, so not applied), "hidden" (alone in the override, applied but hiding
+// AGENTS.md), "unpaired" or "notutf8". Without rules any block in its place
+// counts as "on".
+function codexState(files, rules) {
+  if (files.all.some(binary)) return "notutf8";
+  if (files.all.some(unpaired)) return "unpaired";
+  const inTarget = hasBlock(files.target);
+  const inOther = hasBlock(files.other);
+  if (!inTarget) return inOther ? (files.other === files.all[0] ? "hidden" : "misplaced") : "off";
+  if (rules === undefined) return "on";
+  return blockCurrent(files.target, rules) && !inOther ? "on" : "stale";
+}
+
+// Why these files cannot be written, or "" when they can. The folder counts
+// too: the .bak is written through a temp file beside the file.
+function writeBlocked(changes) {
+  for (const { file } of changes) {
+    for (const path of file.bytes === null ? [dirname(file.path)] : [file.path, dirname(file.path)]) {
+      try {
+        accessSync(path, constants.W_OK);
+      } catch (e) {
+        return `쓸 권한이 없어 그대로 두었습니다 (${e.code || e.message}): ${path}`;
+      }
+    }
+  }
+  return "";
+}
+
+// Writes each file in place, so a symlinked AGENTS.md stays a link and its
+// target changes, after keeping the old bytes in a .bak only this account can
+// read (the file may be a link into a private folder). A new file gets 0644
+// whatever the umask allows more. A file left empty is removed, unless it is a
+// link: Codex skips an empty file anyway.
+function apply(changes) {
+  for (const { file, after } of changes) {
+    if (file.bytes !== null) writeFresh(`${file.path}.tone-compact.bak`, file.bytes, 0o600);
+    if (after === "" && !isLink(file.path)) rmSync(file.path, { force: true });
+    else writeFileSync(file.path, after, { mode: 0o644 });
+  }
+}
+
+const OMX_NOTE =
+  "참고: omx setup 이 AGENTS.md 를 새로 만들면(--force, 덮어쓰기 확인, team 모드를 끈 상태의 omx setup) 이 블록이 사라집니다. 그 뒤에는 on 을 다시 실행하세요. --merge-agents 와 기본 omx setup 은 블록을 남깁니다.";
+
+const notUtf8Refusal = (files) => refuse(`UTF-8 이 아닌 파일이라 그대로 두었습니다: ${files.all.find(binary).path}`);
+
+const unpairedRefusal = (files) =>
+  refuse(`tone-compact 표시의 짝이 맞지 않아 그대로 두었습니다: ${files.all.find(unpaired).path}`);
+
+function codexOn(o) {
+  if (!isDir(o.codexDir)) return refuse(`Codex 설정 폴더가 없습니다: ${o.codexDir}`);
+  const rules = loadRules(o);
+  const files = codexFiles(o);
+  const state = codexState(files, rules);
+  if (state === "notutf8") return notUtf8Refusal(files);
+  if (state === "unpaired") return unpairedRefusal(files);
+  if (state === "on") return done(`Codex: 이미 켜져 있습니다 (변경 없음). ${files.target.path}`);
+  const changes = [{ file: files.target, after: withBlock(stripped(files.target), rules) }];
+  if (hasBlock(files.other)) changes.push({ file: files.other, after: stripped(files.other) });
+  const why = writeBlocked(changes);
+  if (why) return refuse(why);
+  apply(changes);
+  const moved = "블록을 맞는 파일로 옮겼습니다";
+  const what = { stale: "규칙을 이 버전으로 바꿨습니다", misplaced: moved, hidden: moved }[state];
+  const note = files.target === files.all[1] ? `\n${OMX_NOTE}` : "";
+  return done(`Codex: ${what ?? "켰습니다. 다음 세션부터 자동 적용됩니다"}. ${files.target.path}${note}`);
+}
+
+function codexOff(o) {
+  if (!isDir(o.codexDir)) return done(`Codex: 설정 폴더가 없어 끌 것이 없습니다 (변경 없음). ${o.codexDir}`);
+  const files = codexFiles(o);
+  const state = codexState(files);
+  if (state === "notutf8") return notUtf8Refusal(files);
+  if (state === "unpaired") return unpairedRefusal(files);
+  const changes = files.all.filter(hasBlock).map((f) => ({ file: f, after: stripped(f) }));
+  if (changes.length === 0) return done("Codex: 이미 꺼져 있습니다 (변경 없음).");
+  const why = writeBlocked(changes);
+  if (why) return refuse(why);
+  apply(changes);
+  return done(`Codex: 껐습니다. 다음 세션부터 적용되지 않습니다. ${changes.map((c) => c.file.path).join(", ")}`);
+}
+
+// ---- status ----
+
+const STATE_TEXT = {
+  on: "켜짐",
+  ours: "켜짐 (규칙 버전 확인 불가)",
+  stale: "켜짐, 단 규칙이 이 버전과 다름 (on 으로 갱신)",
+  off: "꺼짐",
+  foreign: "꺼짐, 같은 이름의 다른 파일이 있음 (손대지 않음)",
+  misplaced: "꺼짐, 단 블록이 Codex 가 읽지 않는 AGENTS.md 에 있음 (on 으로 옮김)",
+  hidden: "켜짐, 단 AGENTS.override.md 에 블록만 있어 AGENTS.md 가 가려짐 (on 으로 옮김)",
+  notutf8: "UTF-8 이 아닌 지침 파일이 있어 손대지 않음 (on, off 모두 거부)",
+  unpaired: "표시의 짝이 맞지 않음 (on, off 모두 거부. 남은 표시 줄 정리 필요)",
+};
+
+// One status line per runtime. Read failures are reported, not thrown: status
+// is where an exit 2 sends the user to look.
+function describe(name, look) {
+  try {
+    const { state, path } = look();
+    return `- ${name}: ${STATE_TEXT[state] ?? state} (${path})`;
+  } catch (e) {
+    return `- ${name}: 읽을 수 없음 (${e.code || e.message})`;
+  }
+}
+
+export function status(opts = {}) {
+  const o = { ...DEFAULTS, ...opts };
+  const lines = ["tone-compact 상태"];
+  let rules;
+  try {
+    rules = loadRules(o);
+  } catch (e) {
+    lines.push(`- 규칙 원문을 읽지 못해 버전은 비교하지 않음 (${e.code || e.message})`);
+  }
+  lines.push(
+    describe("Claude Code", () => {
+      if (!isDir(o.claudeDir)) return { state: "설정 폴더 없음", path: o.claudeDir };
+      return { state: claudeState(readFile(claudeFile(o)), rules), path: claudeFile(o) };
+    }),
+    describe("Codex", () => {
+      if (!isDir(o.codexDir)) return { state: "설정 폴더 없음", path: o.codexDir };
+      const files = codexFiles(o);
+      return { state: codexState(files, rules), path: files.target.path };
+    }),
+  );
+  return done(lines.join("\n"));
+}
+
+const ACTIONS = new Map([
+  ["claude", { on: claudeOn, off: claudeOff }],
+  ["codex", { on: codexOn, off: codexOff }],
+]);
+
+export const turnOn = (runtime, opts = {}) => ACTIONS.get(runtime).on({ ...DEFAULTS, ...opts });
+export const turnOff = (runtime, opts = {}) => ACTIONS.get(runtime).off({ ...DEFAULTS, ...opts });
+
+// { command, runtime, extra } from the command line; --runtime takes "x" or "=x".
+export function parseArgs(argv) {
+  const rest = [];
+  let runtime = null;
+  for (let i = 0; i < argv.length; i++) {
+    const a = argv[i];
+    if (a === "--runtime") runtime = argv[++i] ?? "";
+    else if (a.startsWith("--runtime=")) runtime = a.slice("--runtime=".length);
+    else rest.push(a);
+  }
+  return { command: (rest[0] ?? "status").toLowerCase(), runtime: runtime?.toLowerCase() ?? null, extra: rest.slice(1) };
+}
+
+const USAGE = "사용법: tone-compact on | off | status [--runtime claude|codex]";
+
+// The runtime on and off act on: the flag, else Claude Code when it runs this.
+const runtimeOf = (flag, env) => flag ?? (env.CLAUDECODE === "1" ? "claude" : null);
+
+function main(argv, env = process.env) {
+  const { command, runtime: flag, extra } = parseArgs(argv);
+  if (extra.length > 0 || !["on", "off", "status"].includes(command) || (flag !== null && !ACTIONS.has(flag))) {
+    process.stdout.write(`${USAGE}\n`);
+    return 1;
+  }
+  const runtime = runtimeOf(flag, env);
+  if (command !== "status" && !ACTIONS.has(runtime)) {
+    process.stdout.write(`런타임을 정할 수 없습니다. --runtime claude 또는 --runtime codex 를 붙이세요.\n${USAGE}\n`);
+    return 1;
+  }
+  try {
+    const { ok, message } = command === "status" ? status() : (command === "on" ? turnOn : turnOff)(runtime);
+    process.stdout.write(`${message}\n`);
+    return ok ? 0 : 1;
+  } catch (e) {
+    process.stdout.write(`예기치 못한 오류로 중단했습니다: ${e.message}\nstatus 로 상태를 확인하세요.\n`);
+    return 2;
+  }
+}
+
+// Run as a command, also when reached through a symlinked path: Node resolves
+// symlinks for import.meta.url but not for process.argv[1].
+const invokedDirectly = () => {
+  try {
+    return realpathSync(process.argv[1]) === fileURLToPath(import.meta.url);
+  } catch {
+    return false;
+  }
+};
+
+if (invokedDirectly()) process.exitCode = main(process.argv.slice(2));