@kaoto/camel-catalog 0.8.9 → 0.9.1

package/dist/camel-catalog/{camel-quarkus/3.20.4/camel-catalog-aggregate-loadbalancers-1fe1b298.json → camel-main/4.10.7/camel-catalog-aggregate-loadbalancers-3efb8b66.json}

@@ -166,6 +166,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"exception" : {
 					"type" : "array",
 					"title" : "Exception",
@@ -174,17 +179,6 @@
 						"type" : "string"
 					}
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
-				"maximumFailoverAttempts" : {
-					"type" : "string",
-					"title" : "Maximum Failover Attempts",
-					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
-					"default" : "-1"
-				},
 				"roundRobin" : {
 					"type" : "string",
 					"title" : "Round Robin",
@@ -194,6 +188,12 @@
 					"type" : "string",
 					"title" : "Sticky",
 					"description" : "Whether or not the failover load balancer should operate in sticky mode or not. If not, then it will always start from the first endpoint when a new message is to be processed. In other words it restart from the top for every message. If sticky is enabled, then it keeps state and will continue with the last known good endpoint. You can also enable sticky mode together with round robin, if so then it will pick the last known good endpoint to use when starting the load balancing (instead of using the next when starting)."
+				},
+				"maximumFailoverAttempts" : {
+					"type" : "string",
+					"title" : "Maximum Failover Attempts",
+					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
+					"default" : "-1"
 				}
 			},
 			"required" : [ ]
@@ -363,16 +363,16 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"correlationExpression" : {
 					"title" : "Correlation Expression",
 					"description" : "The correlation expression to use to calculate the correlation key",
 					"type" : "object",
 					"$comment" : "expression"
-				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
 				}
 			},
 			"definitions" : {
@@ -2224,6 +2224,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"distributionRatio" : {
 					"type" : "string",
 					"title" : "Distribution Ratio",
@@ -2235,11 +2240,6 @@
 					"description" : "Delimiter used to specify the distribution ratio. The default value is , (comma)",
 					"default" : ","
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
 				"roundRobin" : {
 					"type" : "boolean",
 					"title" : "Round Robin",

package/dist/camel-catalog/camel-main/4.10.7/{index-e180f40e.json → index-739cb685.json}

@@ -54,7 +54,7 @@
 			"name" : "loadbalancers",
 			"description" : "Aggregated Camel catalog for loadbalancers",
 			"version" : "4.10.7",
-			"file" : "camel-catalog-aggregate-loadbalancers-1fe1b298.json"
+			"file" : "camel-catalog-aggregate-loadbalancers-3efb8b66.json"
 		},
 		"models" : {
 			"name" : "models",

package/dist/camel-catalog/camel-main/4.10.7.redhat-00009/{camel-catalog-aggregate-loadbalancers-1fe1b298.json → camel-catalog-aggregate-loadbalancers-3efb8b66.json}

@@ -166,6 +166,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"exception" : {
 					"type" : "array",
 					"title" : "Exception",
@@ -174,17 +179,6 @@
 						"type" : "string"
 					}
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
-				"maximumFailoverAttempts" : {
-					"type" : "string",
-					"title" : "Maximum Failover Attempts",
-					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
-					"default" : "-1"
-				},
 				"roundRobin" : {
 					"type" : "string",
 					"title" : "Round Robin",
@@ -194,6 +188,12 @@
 					"type" : "string",
 					"title" : "Sticky",
 					"description" : "Whether or not the failover load balancer should operate in sticky mode or not. If not, then it will always start from the first endpoint when a new message is to be processed. In other words it restart from the top for every message. If sticky is enabled, then it keeps state and will continue with the last known good endpoint. You can also enable sticky mode together with round robin, if so then it will pick the last known good endpoint to use when starting the load balancing (instead of using the next when starting)."
+				},
+				"maximumFailoverAttempts" : {
+					"type" : "string",
+					"title" : "Maximum Failover Attempts",
+					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
+					"default" : "-1"
 				}
 			},
 			"required" : [ ]
@@ -363,16 +363,16 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"correlationExpression" : {
 					"title" : "Correlation Expression",
 					"description" : "The correlation expression to use to calculate the correlation key",
 					"type" : "object",
 					"$comment" : "expression"
-				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
 				}
 			},
 			"definitions" : {
@@ -2224,6 +2224,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"distributionRatio" : {
 					"type" : "string",
 					"title" : "Distribution Ratio",
@@ -2235,11 +2240,6 @@
 					"description" : "Delimiter used to specify the distribution ratio. The default value is , (comma)",
 					"default" : ","
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
 				"roundRobin" : {
 					"type" : "boolean",
 					"title" : "Round Robin",

package/dist/camel-catalog/camel-main/4.10.7.redhat-00009/{index-ba3ba11c.json → index-82e322a3.json}

@@ -54,7 +54,7 @@
 			"name" : "loadbalancers",
 			"description" : "Aggregated Camel catalog for loadbalancers",
 			"version" : "4.10.7.redhat-00009",
-			"file" : "camel-catalog-aggregate-loadbalancers-1fe1b298.json"
+			"file" : "camel-catalog-aggregate-loadbalancers-3efb8b66.json"
 		},
 		"models" : {
 			"name" : "models",

package/dist/camel-catalog/{camel-quarkus/3.27.4/camel-catalog-aggregate-loadbalancers-87345f76.json → camel-main/4.14.5/camel-catalog-aggregate-loadbalancers-9e7d9ae5.json}

@@ -166,6 +166,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"exception" : {
 					"type" : "array",
 					"title" : "Exception",
@@ -174,17 +179,6 @@
 						"type" : "string"
 					}
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
-				"maximumFailoverAttempts" : {
-					"type" : "string",
-					"title" : "Maximum Failover Attempts",
-					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
-					"default" : "-1"
-				},
 				"roundRobin" : {
 					"type" : "string",
 					"title" : "Round Robin",
@@ -194,6 +188,12 @@
 					"type" : "string",
 					"title" : "Sticky",
 					"description" : "Whether or not the failover load balancer should operate in sticky mode or not. If not, then it will always start from the first endpoint when a new message is to be processed. In other words it restart from the top for every message. If sticky is enabled, then it keeps state and will continue with the last known good endpoint. You can also enable sticky mode together with round robin, if so then it will pick the last known good endpoint to use when starting the load balancing (instead of using the next when starting)."
+				},
+				"maximumFailoverAttempts" : {
+					"type" : "string",
+					"title" : "Maximum Failover Attempts",
+					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
+					"default" : "-1"
 				}
 			},
 			"required" : [ ]
@@ -363,16 +363,16 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"correlationExpression" : {
 					"title" : "Correlation Expression",
 					"description" : "The correlation expression to use to calculate the correlation key",
 					"type" : "object",
 					"$comment" : "expression"
-				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
 				}
 			},
 			"definitions" : {
@@ -2269,6 +2269,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"distributionRatio" : {
 					"type" : "string",
 					"title" : "Distribution Ratio",
@@ -2280,11 +2285,6 @@
 					"description" : "Delimiter used to specify the distribution ratio. The default value is , (comma)",
 					"default" : ","
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
 				"roundRobin" : {
 					"type" : "boolean",
 					"title" : "Round Robin",

package/dist/camel-catalog/camel-main/4.14.5/{index-a7673fed.json → index-b4eaa825.json}

@@ -54,7 +54,7 @@
 			"name" : "loadbalancers",
 			"description" : "Aggregated Camel catalog for loadbalancers",
 			"version" : "4.14.5",
-			"file" : "camel-catalog-aggregate-loadbalancers-87345f76.json"
+			"file" : "camel-catalog-aggregate-loadbalancers-9e7d9ae5.json"
 		},
 		"models" : {
 			"name" : "models",

package/dist/camel-catalog/camel-main/{4.18.2/camel-catalog-aggregate-loadbalancers-510ffc53.json → 4.18.1.redhat-00019/camel-catalog-aggregate-loadbalancers-ac534d5a.json}

@@ -166,6 +166,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"exception" : {
 					"type" : "array",
 					"title" : "Exception",
@@ -174,17 +179,6 @@
 						"type" : "string"
 					}
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
-				"maximumFailoverAttempts" : {
-					"type" : "string",
-					"title" : "Maximum Failover Attempts",
-					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
-					"default" : "-1"
-				},
 				"roundRobin" : {
 					"type" : "string",
 					"title" : "Round Robin",
@@ -194,6 +188,12 @@
 					"type" : "string",
 					"title" : "Sticky",
 					"description" : "Whether or not the failover load balancer should operate in sticky mode or not. If not, then it will always start from the first endpoint when a new message is to be processed. In other words it restart from the top for every message. If sticky is enabled, then it keeps state and will continue with the last known good endpoint. You can also enable sticky mode together with round robin, if so then it will pick the last known good endpoint to use when starting the load balancing (instead of using the next when starting)."
+				},
+				"maximumFailoverAttempts" : {
+					"type" : "string",
+					"title" : "Maximum Failover Attempts",
+					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
+					"default" : "-1"
 				}
 			},
 			"required" : [ ]
@@ -363,16 +363,16 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"correlationExpression" : {
 					"title" : "Correlation Expression",
 					"description" : "The correlation expression to use to calculate the correlation key",
 					"type" : "object",
 					"$comment" : "expression"
-				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
 				}
 			},
 			"definitions" : {
@@ -2299,6 +2299,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"distributionRatio" : {
 					"type" : "string",
 					"title" : "Distribution Ratio",
@@ -2310,11 +2315,6 @@
 					"description" : "Delimiter used to specify the distribution ratio. The default value is , (comma)",
 					"default" : ","
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
 				"roundRobin" : {
 					"type" : "boolean",
 					"title" : "Round Robin",

package/dist/camel-catalog/camel-main/4.18.1.redhat-00019/{index-6a4e4f7d.json → index-40c46bce.json}

@@ -54,7 +54,7 @@
 			"name" : "loadbalancers",
 			"description" : "Aggregated Camel catalog for loadbalancers",
 			"version" : "4.18.1.redhat-00019",
-			"file" : "camel-catalog-aggregate-loadbalancers-510ffc53.json"
+			"file" : "camel-catalog-aggregate-loadbalancers-ac534d5a.json"
 		},
 		"models" : {
 			"name" : "models",

package/dist/camel-catalog/{camel-quarkus/3.33.0.redhat-00007/camel-catalog-aggregate-loadbalancers-510ffc53.json → camel-main/4.18.2/camel-catalog-aggregate-loadbalancers-ac534d5a.json}

@@ -166,6 +166,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"exception" : {
 					"type" : "array",
 					"title" : "Exception",
@@ -174,17 +179,6 @@
 						"type" : "string"
 					}
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
-				"maximumFailoverAttempts" : {
-					"type" : "string",
-					"title" : "Maximum Failover Attempts",
-					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
-					"default" : "-1"
-				},
 				"roundRobin" : {
 					"type" : "string",
 					"title" : "Round Robin",
@@ -194,6 +188,12 @@
 					"type" : "string",
 					"title" : "Sticky",
 					"description" : "Whether or not the failover load balancer should operate in sticky mode or not. If not, then it will always start from the first endpoint when a new message is to be processed. In other words it restart from the top for every message. If sticky is enabled, then it keeps state and will continue with the last known good endpoint. You can also enable sticky mode together with round robin, if so then it will pick the last known good endpoint to use when starting the load balancing (instead of using the next when starting)."
+				},
+				"maximumFailoverAttempts" : {
+					"type" : "string",
+					"title" : "Maximum Failover Attempts",
+					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
+					"default" : "-1"
 				}
 			},
 			"required" : [ ]
@@ -363,16 +363,16 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"correlationExpression" : {
 					"title" : "Correlation Expression",
 					"description" : "The correlation expression to use to calculate the correlation key",
 					"type" : "object",
 					"$comment" : "expression"
-				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
 				}
 			},
 			"definitions" : {
@@ -2299,6 +2299,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"distributionRatio" : {
 					"type" : "string",
 					"title" : "Distribution Ratio",
@@ -2310,11 +2315,6 @@
 					"description" : "Delimiter used to specify the distribution ratio. The default value is , (comma)",
 					"default" : ","
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
 				"roundRobin" : {
 					"type" : "boolean",
 					"title" : "Round Robin",

package/dist/camel-catalog/camel-main/4.18.2/{index-ff5644bc.json → index-cee719fe.json}

@@ -54,7 +54,7 @@
 			"name" : "loadbalancers",
 			"description" : "Aggregated Camel catalog for loadbalancers",
 			"version" : "4.18.2",
-			"file" : "camel-catalog-aggregate-loadbalancers-510ffc53.json"
+			"file" : "camel-catalog-aggregate-loadbalancers-ac534d5a.json"
 		},
 		"models" : {
 			"name" : "models",

package/dist/camel-catalog/{camel-quarkus/3.35.0/camel-catalog-aggregate-loadbalancers-a4fce7bb.json → camel-main/4.20.0/camel-catalog-aggregate-loadbalancers-bf1259b7.json}

@@ -168,6 +168,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"exception" : {
 					"type" : "array",
 					"title" : "Exception",
@@ -176,17 +181,6 @@
 						"type" : "string"
 					}
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
-				"maximumFailoverAttempts" : {
-					"type" : "string",
-					"title" : "Maximum Failover Attempts",
-					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
-					"default" : "-1"
-				},
 				"roundRobin" : {
 					"type" : "boolean",
 					"title" : "Round Robin",
@@ -198,6 +192,12 @@
 					"title" : "Sticky",
 					"description" : "Whether or not the failover load balancer should operate in sticky mode or not. If not, then it will always start from the first endpoint when a new message is to be processed. In other words it restart from the top for every message. If sticky is enabled, then it keeps state and will continue with the last known good endpoint. You can also enable sticky mode together with round robin, if so then it will pick the last known good endpoint to use when starting the load balancing (instead of using the next when starting).",
 					"default" : false
+				},
+				"maximumFailoverAttempts" : {
+					"type" : "string",
+					"title" : "Maximum Failover Attempts",
+					"description" : "A value to indicate after X failover attempts we should exhaust (give up). Use -1 to indicate never give up and continuously try to failover. Use 0 to never failover. And use e.g. 3 to failover at most 3 times before giving up. This option can be used whether roundRobin is enabled or not.",
+					"default" : "-1"
 				}
 			},
 			"required" : [ ]
@@ -367,16 +367,16 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"correlationExpression" : {
 					"title" : "Correlation Expression",
 					"description" : "The correlation expression to use to calculate the correlation key",
 					"type" : "object",
 					"$comment" : "expression"
-				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
 				}
 			},
 			"definitions" : {
@@ -2304,6 +2304,11 @@
 			"type" : "object",
 			"additionalProperties" : false,
 			"properties" : {
+				"id" : {
+					"type" : "string",
+					"title" : "Id",
+					"description" : "The id of this node"
+				},
 				"distributionRatio" : {
 					"type" : "string",
 					"title" : "Distribution Ratio",
@@ -2315,11 +2320,6 @@
 					"description" : "Delimiter used to specify the distribution ratio. The default value is , (comma)",
 					"default" : ","
 				},
-				"id" : {
-					"type" : "string",
-					"title" : "Id",
-					"description" : "The id of this node"
-				},
 				"roundRobin" : {
 					"type" : "boolean",
 					"title" : "Round Robin",

package/dist/camel-catalog/camel-main/4.20.0/{index-fef051a8.json → index-db24b943.json}

@@ -54,7 +54,7 @@
 			"name" : "loadbalancers",
 			"description" : "Aggregated Camel catalog for loadbalancers",
 			"version" : "4.20.0",
-			"file" : "camel-catalog-aggregate-loadbalancers-a4fce7bb.json"
+			"file" : "camel-catalog-aggregate-loadbalancers-bf1259b7.json"
 		},
 		"models" : {
 			"name" : "models",