@jsonstudio/rcc 0.85.9

package/dist/config/auth-file-resolver.js

@@ -0,0 +1,77 @@
+/**
+ * AuthFile Resolver
+ * 处理AuthFile机制的密钥解析
+ */
+import fs from 'fs/promises';
+import path from 'path';
+import { homedir } from 'os';
+export class AuthFileResolver {
+    authDir;
+    keyCache = new Map();
+    constructor(authDir) {
+        this.authDir = authDir || path.join(homedir(), '.routecodex', 'auth');
+    }
+    /**
+     * 解析密钥
+     */
+    async resolveKey(keyId) {
+        // 检查缓存
+        if (this.keyCache.has(keyId)) {
+            return this.keyCache.get(keyId);
+        }
+        // 如果不是AuthFile，直接返回
+        if (!keyId.startsWith('authfile-')) {
+            return keyId;
+        }
+        // 解析AuthFile
+        const filename = keyId.replace('authfile-', '');
+        const filePath = path.join(this.authDir, filename);
+        try {
+            // 读取密钥文件
+            const keyContent = await fs.readFile(filePath, 'utf-8');
+            const actualKey = keyContent.trim();
+            // 缓存密钥
+            this.keyCache.set(keyId, actualKey);
+            return actualKey;
+        }
+        catch (error) {
+            throw new Error(`Failed to read auth file ${filePath}: ${error}`);
+        }
+    }
+    /**
+     * 批量解析密钥
+     */
+    async resolveKeys(keyIds) {
+        const result = new Map();
+        for (const keyId of keyIds) {
+            try {
+                const actualKey = await this.resolveKey(keyId);
+                result.set(keyId, actualKey);
+            }
+            catch (error) {
+                console.warn(`Failed to resolve key ${keyId}:`, error);
+                result.set(keyId, keyId); // 使用原始keyId作为fallback
+            }
+        }
+        return result;
+    }
+    /**
+     * 清除缓存
+     */
+    clearCache() {
+        this.keyCache.clear();
+    }
+    /**
+     * 确保Auth目录存在
+     */
+    async ensureAuthDir() {
+        try {
+            await fs.mkdir(this.authDir, { recursive: true });
+            console.log(`Auth directory created: ${this.authDir}`);
+        }
+        catch (error) {
+            // 目录已存在，忽略错误
+        }
+    }
+}
+//# sourceMappingURL=auth-file-resolver.js.map

package/dist/config/auth-file-resolver.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"auth-file-resolver.js","sourceRoot":"","sources":["../../src/config/auth-file-resolver.ts"],"names":[],"mappings":"AAAA;;;GAGG;AAEH,OAAO,EAAE,MAAM,aAAa,CAAC;AAC7B,OAAO,IAAI,MAAM,MAAM,CAAC;AACxB,OAAO,EAAE,OAAO,EAAE,MAAM,IAAI,CAAC;AAE7B,MAAM,OAAO,gBAAgB;IACnB,OAAO,CAAS;IAChB,QAAQ,GAAwB,IAAI,GAAG,EAAE,CAAC;IAElD,YAAY,OAAgB;QAC1B,IAAI,CAAC,OAAO,GAAG,OAAO,IAAI,IAAI,CAAC,IAAI,CAAC,OAAO,EAAE,EAAE,aAAa,EAAE,MAAM,CAAC,CAAC;IACxE,CAAC;IAED;;OAEG;IACH,KAAK,CAAC,UAAU,CAAC,KAAa;QAC5B,OAAO;QACP,IAAI,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,KAAK,CAAC,EAAE,CAAC;YAC7B,OAAO,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,KAAK,CAAE,CAAC;QACnC,CAAC;QAED,oBAAoB;QACpB,IAAI,CAAC,KAAK,CAAC,UAAU,CAAC,WAAW,CAAC,EAAE,CAAC;YACnC,OAAO,KAAK,CAAC;QACf,CAAC;QAED,aAAa;QACb,MAAM,QAAQ,GAAG,KAAK,CAAC,OAAO,CAAC,WAAW,EAAE,EAAE,CAAC,CAAC;QAChD,MAAM,QAAQ,GAAG,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,OAAO,EAAE,QAAQ,CAAC,CAAC;QAEnD,IAAI,CAAC;YACH,SAAS;YACT,MAAM,UAAU,GAAG,MAAM,EAAE,CAAC,QAAQ,CAAC,QAAQ,EAAE,OAAO,CAAC,CAAC;YACxD,MAAM,SAAS,GAAG,UAAU,CAAC,IAAI,EAAE,CAAC;YAEpC,OAAO;YACP,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,KAAK,EAAE,SAAS,CAAC,CAAC;YAEpC,OAAO,SAAS,CAAC;QACnB,CAAC;QAAC,OAAO,KAAK,EAAE,CAAC;YACf,MAAM,IAAI,KAAK,CAAC,4BAA4B,QAAQ,KAAK,KAAK,EAAE,CAAC,CAAC;QACpE,CAAC;IACH,CAAC;IAED;;OAEG;IACH,KAAK,CAAC,WAAW,CAAC,MAAgB;QAChC,MAAM,MAAM,GAAG,IAAI,GAAG,EAAkB,CAAC;QAEzC,KAAK,MAAM,KAAK,IAAI,MAAM,EAAE,CAAC;YAC3B,IAAI,CAAC;gBACH,MAAM,SAAS,GAAG,MAAM,IAAI,CAAC,UAAU,CAAC,KAAK,CAAC,CAAC;gBAC/C,MAAM,CAAC,GAAG,CAAC,KAAK,EAAE,SAAS,CAAC,CAAC;YAC/B,CAAC;YAAC,OAAO,KAAK,EAAE,CAAC;gBACf,OAAO,CAAC,IAAI,CAAC,yBAAyB,KAAK,GAAG,EAAE,KAAK,CAAC,CAAC;gBACvD,MAAM,CAAC,GAAG,CAAC,KAAK,EAAE,KAAK,CAAC,CAAC,CAAC,sBAAsB;YAClD,CAAC;QACH,CAAC;QAED,OAAO,MAAM,CAAC;IAChB,CAAC;IAED;;OAEG;IACH,UAAU;QACR,IAAI,CAAC,QAAQ,CAAC,KAAK,EAAE,CAAC;IACxB,CAAC;IAED;;OAEG;IACH,KAAK,CAAC,aAAa;QACjB,IAAI,CAAC;YACH,MAAM,EAAE,CAAC,KAAK,CAAC,IAAI,CAAC,OAAO,EAAE,EAAE,SAAS,EAAE,IAAI,EAAE,CAAC,CAAC;YAClD,OAAO,CAAC,GAAG,CAAC,2BAA2B,IAAI,CAAC,OAAO,EAAE,CAAC,CAAC;QACzD,CAAC;QAAC,OAAO,KAAK,EAAE,CAAC;YACf,aAAa;QACf,CAAC;IACH,CAAC;CACF"}

package/dist/config/config-paths.d.ts

@@ -0,0 +1,14 @@
+/**
+ * Resolve the primary RouteCodex configuration file path using a shared precedence order.
+ *
+ * This function now uses the UnifiedConfigPathResolver for consistent path resolution
+ * across the entire RouteCodex system while maintaining backward compatibility.
+ *
+ * @param preferredPath - Optional explicit path that takes highest priority
+ * @returns The resolved configuration file path
+ */
+export declare function resolveRouteCodexConfigPath(preferredPath?: string): string;
+/**
+ * Legacy configuration path resolution (kept for emergency fallback)
+ * @deprecated Use UnifiedConfigPathResolver instead
+ */

package/dist/config/config-paths.js

@@ -0,0 +1,28 @@
+import fs from 'fs';
+import path from 'path';
+import { homedir } from 'os';
+import { UnifiedConfigPathResolver } from './unified-config-paths.js';
+/**
+ * Resolve the primary RouteCodex configuration file path using a shared precedence order.
+ *
+ * This function now uses the UnifiedConfigPathResolver for consistent path resolution
+ * across the entire RouteCodex system while maintaining backward compatibility.
+ *
+ * @param preferredPath - Optional explicit path that takes highest priority
+ * @returns The resolved configuration file path
+ */
+export function resolveRouteCodexConfigPath(preferredPath) {
+    // Use the unified resolver for consistent behavior; do not fall back to legacy search
+    const result = UnifiedConfigPathResolver.resolveConfigPath({
+        preferredPath,
+        allowDirectoryScan: true,
+        strict: false
+    });
+    return result.resolvedPath;
+}
+/**
+ * Legacy configuration path resolution (kept for emergency fallback)
+ * @deprecated Use UnifiedConfigPathResolver instead
+ */
+// Legacy resolver removed: unified resolver is the single source of truth
+//# sourceMappingURL=config-paths.js.map

package/dist/config/config-paths.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"config-paths.js","sourceRoot":"","sources":["../../src/config/config-paths.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,MAAM,IAAI,CAAC;AACpB,OAAO,IAAI,MAAM,MAAM,CAAC;AACxB,OAAO,EAAE,OAAO,EAAE,MAAM,IAAI,CAAC;AAC7B,OAAO,EAAE,yBAAyB,EAAE,MAAM,2BAA2B,CAAC;AAEtE;;;;;;;;GAQG;AACH,MAAM,UAAU,2BAA2B,CAAC,aAAsB;IAChE,sFAAsF;IACtF,MAAM,MAAM,GAAG,yBAAyB,CAAC,iBAAiB,CAAC;QACzD,aAAa;QACb,kBAAkB,EAAE,IAAI;QACxB,MAAM,EAAE,KAAK;KACd,CAAC,CAAC;IACH,OAAO,MAAM,CAAC,YAAY,CAAC;AAC7B,CAAC;AAED;;;GAGG;AACH,0EAA0E"}

package/dist/config/routecodex-config-loader.d.ts

@@ -0,0 +1,7 @@
+type UnknownRecord = Record<string, unknown>;
+export interface LoadedRouteCodexConfig {
+    configPath: string;
+    userConfig: UnknownRecord;
+}
+export declare function loadRouteCodexConfig(explicitPath?: string): Promise<LoadedRouteCodexConfig>;
+export {};

package/dist/config/routecodex-config-loader.js

@@ -0,0 +1,33 @@
+import fs from 'node:fs/promises';
+import path from 'node:path';
+import os from 'node:os';
+import { resolveRouteCodexConfigPath } from './config-paths.js';
+export async function loadRouteCodexConfig(explicitPath) {
+    const configPath = await resolveConfigPath(explicitPath);
+    const raw = await fs.readFile(configPath, 'utf-8');
+    const parsed = raw.trim() ? JSON.parse(raw) : {};
+    const userConfig = isRecord(parsed) ? parsed : {};
+    if (!isRecord(userConfig.virtualrouter)) {
+        const providers = isRecord(userConfig.providers) ? userConfig.providers : {};
+        const routing = isRecord(userConfig.routing) ? userConfig.routing : {};
+        userConfig.virtualrouter = { providers, routing };
+    }
+    return {
+        configPath,
+        userConfig
+    };
+}
+async function resolveConfigPath(explicit) {
+    if (explicit && explicit.trim()) {
+        return path.resolve(explicit.trim());
+    }
+    const resolved = resolveRouteCodexConfigPath();
+    if (resolved) {
+        return resolved;
+    }
+    return path.join(os.homedir(), '.routecodex', 'config.json');
+}
+function isRecord(value) {
+    return !!value && typeof value === 'object' && !Array.isArray(value);
+}
+//# sourceMappingURL=routecodex-config-loader.js.map

package/dist/config/routecodex-config-loader.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"routecodex-config-loader.js","sourceRoot":"","sources":["../../src/config/routecodex-config-loader.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,MAAM,kBAAkB,CAAC;AAClC,OAAO,IAAI,MAAM,WAAW,CAAC;AAC7B,OAAO,EAAE,MAAM,SAAS,CAAC;AACzB,OAAO,EAAE,2BAA2B,EAAE,MAAM,mBAAmB,CAAC;AAShE,MAAM,CAAC,KAAK,UAAU,oBAAoB,CAAC,YAAqB;IAC9D,MAAM,UAAU,GAAG,MAAM,iBAAiB,CAAC,YAAY,CAAC,CAAC;IACzD,MAAM,GAAG,GAAG,MAAM,EAAE,CAAC,QAAQ,CAAC,UAAU,EAAE,OAAO,CAAC,CAAC;IACnD,MAAM,MAAM,GAAG,GAAG,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC;IACjD,MAAM,UAAU,GAAkB,QAAQ,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,CAAC;IAEjE,IAAI,CAAC,QAAQ,CAAC,UAAU,CAAC,aAAa,CAAC,EAAE,CAAC;QACxC,MAAM,SAAS,GAAG,QAAQ,CAAC,UAAU,CAAC,SAAS,CAAC,CAAC,CAAC,CAAC,UAAU,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,CAAC;QAC7E,MAAM,OAAO,GAAG,QAAQ,CAAC,UAAU,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,UAAU,CAAC,OAAO,CAAC,CAAC,CAAC,EAAE,CAAC;QACvE,UAAU,CAAC,aAAa,GAAG,EAAE,SAAS,EAAE,OAAO,EAAE,CAAC;IACpD,CAAC;IAED,OAAO;QACL,UAAU;QACV,UAAU;KACX,CAAC;AACJ,CAAC;AAED,KAAK,UAAU,iBAAiB,CAAC,QAAiB;IAChD,IAAI,QAAQ,IAAI,QAAQ,CAAC,IAAI,EAAE,EAAE,CAAC;QAChC,OAAO,IAAI,CAAC,OAAO,CAAC,QAAQ,CAAC,IAAI,EAAE,CAAC,CAAC;IACvC,CAAC;IACD,MAAM,QAAQ,GAAG,2BAA2B,EAAE,CAAC;IAC/C,IAAI,QAAQ,EAAE,CAAC;QACb,OAAO,QAAQ,CAAC;IAClB,CAAC;IACD,OAAO,IAAI,CAAC,IAAI,CAAC,EAAE,CAAC,OAAO,EAAE,EAAE,aAAa,EAAE,aAAa,CAAC,CAAC;AAC/D,CAAC;AAED,SAAS,QAAQ,CAAC,KAAc;IAC9B,OAAO,CAAC,CAAC,KAAK,IAAI,OAAO,KAAK,KAAK,QAAQ,IAAI,CAAC,KAAK,CAAC,OAAO,CAAC,KAAK,CAAC,CAAC;AACvE,CAAC"}

package/dist/config/system-prompts/claude-cli.txt

@@ -0,0 +1,3 @@
+You are Claude Code, Anthropic's official CLI for Claude.
+
+Analyze if this message indicates a new conversation topic. If it does, extract a 2-3 word title that captures the new topic. Format your response as a JSON object with two fields: 'isNewTopic' (boolean) and 'title' (string, or null if isNewTopic is false). Only include these fields, no other text. ONLY generate the JSON object, no other text (eg. no markdown).

package/dist/config/system-prompts/codex-cli.txt

@@ -0,0 +1,105 @@
+You are Codex, based on GPT-5. You are running as a coding agent in the Codex CLI on a user's computer.
+
+## General
+
+- When searching for text or files, prefer using `rg` or `rg --files` respectively because `rg` is much faster than alternatives like `grep`. (If the `rg` command is not found, then use alternatives.)
+
+## Editing constraints
+
+- Default to ASCII when editing or creating files. Only introduce non-ASCII or other Unicode characters when there is a clear justification and the file already uses them.
+- Add succinct code comments that explain what is going on if code is not self-explanatory. You should not add comments like "Assigns the value to the variable", but a brief comment might be useful ahead of a complex code block that the user would otherwise have to spend time parsing out. Usage of these comments should be rare.
+- Try to use apply_patch for single file edits, but it is fine to explore other options to make the edit if it does not work well. Do not use apply_patch for changes that are auto-generated (i.e. generating package.json or running a lint or format command like gofmt) or when scripting is more efficient (such as search and replacing a string across a codebase).
+- You may be in a dirty git worktree.
+    * NEVER revert existing changes you did not make unless explicitly requested, since these changes were made by the user.
+    * If asked to make a commit or code edits and there are unrelated changes to your work or changes that you didn't make in those files, don't revert those changes.
+    * If the changes are in files you've touched recently, you should read carefully and understand how you can work with the changes rather than reverting them.
+    * If the changes are in unrelated files, just ignore them and don't revert them.
+- Do not amend a commit unless explicitly requested to do so.
+- While you are working, you might notice unexpected changes that you didn't make. If this happens, STOP IMMEDIATELY and ask the user how they would like to proceed.
+- **NEVER** use destructive commands like `git reset --hard` or `git checkout --` unless specifically requested or approved by the user.
+
+## Plan tool
+
+When using the planning tool:
+- Skip using the planning tool for straightforward tasks (roughly the easiest 25%).
+- Do not make single-step plans.
+- When you made a plan, update it after having performed one of the sub-tasks that you shared on the plan.
+
+## Codex CLI harness, sandboxing, and approvals
+
+The Codex CLI harness supports several different configurations for sandboxing and escalation approvals that the user can choose from.
+
+Filesystem sandboxing defines which files can be read or written. The options for `sandbox_mode` are:
+- **read-only**: The sandbox only permits reading files.
+- **workspace-write**: The sandbox permits reading files, and editing files in `cwd` and `writable_roots`. Editing files in other directories requires approval.
+- **danger-full-access**: No filesystem sandboxing - all commands are permitted.
+
+Network sandboxing defines whether network can be accessed without approval. Options for `network_access` are:
+- **restricted**: Requires approval
+- **enabled**: No approval needed
+
+Approvals are your mechanism to get user consent to run shell commands without the sandbox. Possible configuration options for `approval_policy` are
+- **untrusted**: The harness will escalate most commands for user approval, apart from a limited allowlist of safe "read" commands.
+- **on-failure**: The harness will allow all commands to run in the sandbox (if enabled), and failures will be escalated to the user for approval to run again without the sandbox.
+- **on-request**: Commands will be run in the sandbox by default, and you can specify in your tool call if you want to escalate a command to run without sandboxing. (Note that this mode is not always available. If it is, you'll see parameters for it in the `shell` command description.)
+- **never**: This is a non-interactive mode where you may NEVER ask the user for approval to run commands. Instead, you must always persist and work around constraints to solve the task for the user. You MUST do your utmost best to finish the task and validate your work before yielding. If this mode is paired with `danger-full-access`, take advantage of it to deliver the best outcome for the user. Further, in this mode, your default testing philosophy is overridden: Even if you don't see local patterns for testing, you may add tests and scripts to validate your work. Just remove them before yielding.
+
+When you are running with `approval_policy == on-request`, and sandboxing enabled, here are scenarios where you'll need to request approval:
+- You need to run a command that writes to a directory that requires it (e.g. running tests that write to /var)
+- You need to run a GUI app (e.g., open/xdg-open/osascript) to open browsers or files.
+- You are running sandboxed and need to run a command that requires network access (e.g. installing packages)
+- If you run a command that is important to solving the user's query, but it fails because of sandboxing, rerun the command with approval. ALWAYS proceed to use the `with_escalated_permissions` and `justification` parameters - do not message the user before requesting approval for the command.
+- You are about to take a potentially destructive action such as an `rm` or `git reset` that the user did not explicitly ask for
+- (for all of these, you should weigh alternative paths that do not require approval)
+
+When `sandbox_mode` is set to read-only, you'll need to request approval for any command that isn't a read.
+
+You will be told what filesystem sandboxing, network sandboxing, and approval mode are active in a developer or user message. If you are not told about this, assume that you are running with workspace-write, network sandboxing enabled, and approval on-failure.
+
+Although they introduce friction to the user because your work is paused until the user responds, you should leverage them when necessary to accomplish important work. If the completing the task requires escalated permissions, Do not let these settings or the sandbox deter you from attempting to accomplish the user's task unless it is set to "never", in which case never ask for approvals.
+
+When requesting approval to execute a command that will require escalated privileges:
+  - Provide the `with_escalated_permissions` parameter with the boolean value true
+  - Include a short, 1 sentence explanation for why you need to enable `with_escalated_permissions` in the justification parameter
+
+## Special user requests
+
+- If the user makes a simple request (such as asking for the time) which you can fulfill by running a terminal command (such as `date`), you should do so.
+- If the user asks for a "review", default to a code review mindset: prioritise identifying bugs, risks, behavioural regressions, and missing tests. Findings must be the primary focus of the response - keep summaries or overviews brief and only after enumerating the issues. Present findings first (ordered by severity with file/line references), follow with open questions or assumptions, and offer a change-summary only as a secondary detail. If no findings are discovered, state that explicitly and mention any residual risks or testing gaps.
+
+## Presenting your work and final message
+
+You are producing plain text that will later be styled by the CLI. Follow these rules exactly. Formatting should make results easy to scan, but not feel mechanical. Use judgment to decide how much structure adds value.
+
+- Default: be very concise; friendly coding teammate tone.
+- Ask only when needed; suggest ideas; mirror the user's style.
+- For substantial work, summarize clearly; follow final‑answer formatting.
+- Skip heavy formatting for simple confirmations.
+- Don't dump large files you've written; reference paths only.
+- No "save/copy this file" - User is on the same machine.
+- Offer logical next steps (tests, commits, build) briefly; add verify steps if you couldn't do something.
+- For code changes:
+  * Lead with a quick explanation of the change, and then give more details on the context covering where and why a change was made. Do not start this explanation with "summary", just jump right in.
+  * If there are natural next steps the user may want to take, suggest them at the end of your response. Do not make suggestions if there are no natural next steps.
+  * When suggesting multiple options, use numeric lists for the suggestions so the user can quickly respond with a single number.
+- The user does not command execution outputs. When asked to show the output of a command (e.g. `git show`), relay the important details in your answer or summarize the key lines so the user understands the result.
+
+### Final answer structure and style guidelines
+
+- Plain text; CLI handles styling. Use structure only when it helps scanability.
+- Headers: optional; short Title Case (1-3 words) wrapped in **…**; no blank line before the first bullet; add only if they truly help.
+- Bullets: use - ; merge related points; keep to one line when possible; 4–6 per list ordered by importance; keep phrasing consistent.
+- Monospace: backticks for commands/paths/env vars/code ids and inline examples; use for literal keyword bullets; never combine with **.
+- Code samples or multi-line snippets should be wrapped in fenced code blocks; include an info string as often as possible.
+- Structure: group related bullets; order sections general → specific → supporting; for subsections, start with a bolded keyword bullet, then items; match complexity to the task.
+- Tone: collaborative, concise, factual; present tense, active voice; self‑contained; no "above/below"; parallel wording.
+- Don'ts: no nested bullets/hierarchies; no ANSI codes; don't cram unrelated keywords; keep keyword lists short—wrap/reformat if long; avoid naming formatting styles in answers.
+- Adaptation: code explanations → precise, structured with code refs; simple tasks → lead with outcome; big changes → logical walkthrough + rationale + next actions; casual one-offs → plain sentences, no headers/bullets.
+- File References: When referencing files in your response, make sure to include the relevant start line and always follow the below rules:
+  * Use inline code to make file paths clickable.
+  * Each reference should have a stand alone path. Even if it's the same file.
+  * Accepted: absolute, workspace‑relative, a/ or b/ diff prefixes, or bare filename/suffix.
+  * Line/column (1‑based, optional): :line[:column] or #Lline[Ccolumn] (column defaults to 1).
+  * Do not use URIs like file://, vscode://, or https://.
+  * Do not provide range of lines
+  * Examples: src/app.ts, src/app.ts:42, b/server/index.js#L10, C:\repo\project\main.rs:12:5

package/dist/config/tool-mapping-loader.d.ts

@@ -0,0 +1,32 @@
+export interface MappingPattern {
+    type: 'bracket' | 'invoke_tag' | 'function_block' | 'markup_regex';
+    regex?: string;
+    json_path?: string;
+    fallback_paths?: string[];
+    fields?: Record<string, unknown>;
+    on_missing?: {
+        fields?: Record<string, unknown>;
+    };
+}
+export interface ToolMapping {
+    patterns?: MappingPattern[];
+    aliases?: Record<string, string>;
+    postprocess?: Array<{
+        ensure_array: {
+            field: string;
+            default_shell?: boolean;
+        };
+    } | {
+        wrap_object: {
+            field: string;
+        };
+    }>;
+}
+export interface ToolMappingsConfig {
+    global?: {
+        strip_think_blocks?: boolean;
+        max_tool_calls?: number;
+    };
+    tools: Record<string, ToolMapping>;
+}
+export declare function loadToolMappings(provider: string): ToolMappingsConfig | null;

package/dist/config/tool-mapping-loader.js

@@ -0,0 +1,34 @@
+import fs from 'node:fs';
+import path from 'node:path';
+import { homedir } from 'node:os';
+function readIfExists(file) {
+    try {
+        if (fs.existsSync(file)) {
+            const raw = fs.readFileSync(file, 'utf-8');
+            return JSON.parse(raw);
+        }
+    }
+    catch {
+        // ignore
+    }
+    return null;
+}
+export function loadToolMappings(provider) {
+    // Priority: user home override -> repo config
+    const homePath = path.join(homedir(), '.routecodex', 'config', 'tool-mappings', `${provider}.json`);
+    const repoPath = path.join(process.cwd(), 'config', 'tool-mappings', `${provider}.json`);
+    const raw = readIfExists(homePath) ?? readIfExists(repoPath);
+    if (!raw) {
+        return null;
+    }
+    // Basic shape validation with narrowing
+    if (typeof raw !== 'object' || raw === null) {
+        return { tools: {} };
+    }
+    const maybe = raw;
+    if (!maybe.tools || typeof maybe.tools !== 'object') {
+        return { tools: {} };
+    }
+    return raw;
+}
+//# sourceMappingURL=tool-mapping-loader.js.map

package/dist/config/tool-mapping-loader.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"tool-mapping-loader.js","sourceRoot":"","sources":["../../src/config/tool-mapping-loader.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,MAAM,SAAS,CAAC;AACzB,OAAO,IAAI,MAAM,WAAW,CAAC;AAC7B,OAAO,EAAE,OAAO,EAAE,MAAM,SAAS,CAAC;AA4BlC,SAAS,YAAY,CAAC,IAAY;IAChC,IAAI,CAAC;QACH,IAAI,EAAE,CAAC,UAAU,CAAC,IAAI,CAAC,EAAE,CAAC;YACxB,MAAM,GAAG,GAAG,EAAE,CAAC,YAAY,CAAC,IAAI,EAAE,OAAO,CAAC,CAAC;YAC3C,OAAO,IAAI,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC;QACzB,CAAC;IACH,CAAC;IAAC,MAAM,CAAC;QACP,SAAS;IACX,CAAC;IACD,OAAO,IAAI,CAAC;AACd,CAAC;AAED,MAAM,UAAU,gBAAgB,CAAC,QAAgB;IAC/C,8CAA8C;IAC9C,MAAM,QAAQ,GAAG,IAAI,CAAC,IAAI,CAAC,OAAO,EAAE,EAAE,aAAa,EAAE,QAAQ,EAAE,eAAe,EAAE,GAAG,QAAQ,OAAO,CAAC,CAAC;IACpG,MAAM,QAAQ,GAAG,IAAI,CAAC,IAAI,CAAC,OAAO,CAAC,GAAG,EAAE,EAAE,QAAQ,EAAE,eAAe,EAAE,GAAG,QAAQ,OAAO,CAAC,CAAC;IAEzF,MAAM,GAAG,GAAG,YAAY,CAAC,QAAQ,CAAC,IAAI,YAAY,CAAC,QAAQ,CAAC,CAAC;IAC7D,IAAI,CAAC,GAAG,EAAE,CAAC;QAAC,OAAO,IAAI,CAAC;IAAC,CAAC;IAE1B,wCAAwC;IACxC,IAAI,OAAO,GAAG,KAAK,QAAQ,IAAI,GAAG,KAAK,IAAI,EAAE,CAAC;QAC5C,OAAO,EAAE,KAAK,EAAE,EAAE,EAAE,CAAC;IACvB,CAAC;IACD,MAAM,KAAK,GAAG,GAA0B,CAAC;IACzC,IAAI,CAAC,KAAK,CAAC,KAAK,IAAI,OAAO,KAAK,CAAC,KAAK,KAAK,QAAQ,EAAE,CAAC;QACpD,OAAO,EAAE,KAAK,EAAE,EAAE,EAAE,CAAC;IACvB,CAAC;IACD,OAAO,GAAyB,CAAC;AACnC,CAAC"}

package/dist/config/unified-config-paths.d.ts

@@ -0,0 +1,87 @@
+/**
+ * Unified Configuration Path Resolution System
+ *
+ * This system provides a single source of truth for all RouteCodex configuration
+ * path resolution, supporting multiple discovery methods while maintaining backward
+ * compatibility with existing environment variables and file locations.
+ */
+export interface ConfigPathOptions {
+    /** Explicit preferred path (highest priority) */
+    preferredPath?: string;
+    /** Specific configuration file name to look for */
+    configName?: string;
+    /** Whether to use strict mode (fail if no config found) */
+    strict?: boolean;
+    /** Whether to allow directory scanning for config files */
+    allowDirectoryScan?: boolean;
+    /** Base directory for configuration resolution */
+    baseDir?: string;
+}
+export interface ConfigPathResult {
+    /** The resolved configuration path */
+    resolvedPath: string;
+    /** Source of the resolution */
+    source: 'explicit' | 'environment' | 'default' | 'fallback';
+    /** Type of configuration target */
+    configType: 'file' | 'directory';
+    /** Whether the path exists */
+    exists: boolean;
+    /** Warning messages if any */
+    warnings?: string[];
+    /** Information about resolution process */
+    resolutionInfo?: {
+        candidates: string[];
+        environmentVariables: Record<string, string | undefined>;
+        scannedDirectories?: string[];
+    };
+}
+/**
+ * Default configuration directory structure
+ */
+/**
+ * Unified configuration path resolver
+ */
+export declare class UnifiedConfigPathResolver {
+    /**
+     * Resolve configuration path using unified precedence order
+     */
+    static resolveConfigPath(options?: ConfigPathOptions): ConfigPathResult;
+    /**
+     * Get the default configuration directory
+     */
+    static getDefaultConfigDirectory(): string;
+    /**
+     * Scan a directory for configuration files
+     */
+    static scanConfigDirectory(directory: string, preferredName?: string): string | null;
+    /**
+     * Build candidate list for configuration resolution
+     */
+    private static buildCandidateList;
+    /**
+     * Expand home directory in path
+     */
+    private static expandPath;
+    /**
+     * Determine the source of a resolved path
+     */
+    private static determineSource;
+    /**
+     * Validate that a configuration path is accessible
+     */
+    static validateConfigPath(configPath: string): {
+        valid: boolean;
+        error?: string;
+    };
+    /**
+     * Get all available configuration files in the standard directories
+     */
+    static getAvailableConfigs(): {
+        directory: string;
+        files: string[];
+    }[];
+    /**
+     * Ensure the default configuration directory exists
+     */
+    static ensureConfigDirectory(): string;
+}