@johnmorrisdotca/uchusen-rockets 0.17.0 → 0.19.0

package/dist/launches/source.js

@@ -0,0 +1,22 @@
+// GENERATED by scripts/make-launches.ts. Do not edit by hand: see NOTICE.md and docs/guides/launch-log.md.
+// Where the launch log comes from. It is a file of its own so that reading the credit does not load the data in ./data.ts.
+/**
+ * Where the log comes from: GCAT, its author, its licence and the exact credit to print where the log is used, with the release it was packed from and the day its files were last updated.
+ *
+ * @example
+ * ```ts
+ * import { LAUNCH_LOG_SOURCE } from "@johnmorrisdotca/uchusen-rockets/launches/source";
+ *
+ * console.log(LAUNCH_LOG_SOURCE.credit);
+ * ```
+ */
+export const LAUNCH_LOG_SOURCE = {
+    title: "GCAT: General Catalog of Artificial Space Objects",
+    author: "Jonathan C. McDowell",
+    url: "https://planet4589.org/space/gcat",
+    licence: "CC BY 4.0",
+    licenceUrl: "https://creativecommons.org/licenses/by/4.0/",
+    credit: "Data from GCAT (J. McDowell, planet4589.org/space/gcat)",
+    release: "1.8.9",
+    updated: "2026-11-09",
+};

package/dist/model/hubble.js

@@ -1,28 +1,62 @@
-// Hubble in plain shapes, for the line looks: its length and width are sourced, and where its arrays and door stand is measured from NASA's model at that scale. The painted look is NASA's model.
+// Hubble in plain shapes, for the line looks, as parts in slots: its length and width are sourced, and where each part begins, and where its arrays and antennas stand, is measured from the licensed model at that
+// scale. The painted look is that model, one file a part. The five sections stack up the axis; the arrays run out along ±X and the antennas along ±Z from where they are rooted on the forward shell.
 import { HUBBLE_WIDE } from "../data/hubble.js";
-import { tube } from "./kit.js";
-const H = 13.2;
+import { blank } from "../data/types.js";
+import { horn } from "./fleet/detail.js";
+import { taper, tube } from "./kit.js";
+import { strut } from "./pieces.js";
 const R = (HUBBLE_WIDE.value ?? 0) / 2;
-const TUBE_R = R * 0.74;
-const WAIST = 5.1;
+/** The forward section's radius, from the model at the sourced width. */
+const SHIELD_R = 1.285;
+const AFT = 3.65;
+const EQUIPMENT = 1.7;
+const FORWARD = 3.04;
+const SHIELD = 4.74;
+const DOOR = 0.07;
+/** Where the arrays' masts and the antennas' booms are rooted: up the stack, and out from the axis. */
+const ARRAY_Y = 5.82;
+const ARRAY_ROOT = 1.48;
+const ANTENNA_Y = 6.13;
+const ANTENNA_ROOT = 1.69;
+/** The forward section's width, and a wing's and a boom's reach, have no figure in a source read here. */
+const FORWARD_WIDE = blank("The forward section's width has no figure in a source read here: the model's is 2.6 m at the sourced width of the aft shroud.");
+const ARRAY_WIDE = blank("A wing's reach has no figure in a source read here: the model's is 3.7 m out from the shell.");
+const ANTENNA_WIDE = blank("A boom's reach has no figure in a source read here: the model's is 3.9 m out from the shell.");
+const aftShroud = () => [tube("steel", R, 0, AFT, { rings: [0.02, 2.2, AFT - 0.02] }), { kind: "lathe", material: "dark", segs: 28, under: true, profile: [[0, 0], [R, 0]] }];
+const equipmentSection = () => [tube("steel", R, 0, EQUIPMENT, { welds: [0.6, 1.1] })];
+const forwardShell = () => [tube("steel", R, 0, 0.98, { rings: [0.02] }), taper("steel", R, 0.98, SHIELD_R, FORWARD)];
+const lightShield = () => [tube("steel", SHIELD_R, 0, SHIELD, { rings: [1, 2.2, 3.4], welds: [SHIELD - 0.02] })];
+const apertureDoor = () => [{ kind: "lathe", material: "engine-pale", segs: 32, body: true, outline: true, profile: [[SHIELD_R, 0], [SHIELD_R, DOOR], [0.001, DOOR]] }];
+/** A wing: its mast out along `side` X from the root, then the panel, 2.1 m wide and 6.2 m tall. */
 const array = (side) => {
-    const frame = { o: [side * (R + 3.5), WAIST, 0], u: [1, 0, 0], v: [0, 0, 1], w: [0, 1, 0] };
-    return { kind: "plate", material: "gold", frame, outline: [[-1.2, -6.2], [1.2, -6.2], [1.2, 6.2], [-1.2, 6.2]], thickness: 0.06, ribs: [[[-1.2, 0], [1.2, 0]]] };
+    const frame = { o: [side * 2.62, 0, 0], u: [1, 0, 0], v: [0, 1, 0], w: [0, 0, 1] };
+    return [
+        strut("engine-pale", [0, 0, 0], [side * 1.56, 0, 0], 0.3, 0.3, { plain: false }),
+        { kind: "plate", material: "gold", frame, outline: [[-1.05, -3.1], [1.05, -3.1], [1.05, 3.1], [-1.05, 3.1]], thickness: 0.06, ribs: [[[0, -3.1], [0, 3.1]]] },
+    ];
 };
-const telescope = () => [
-    tube("steel", R, 0, WAIST, { rings: [0.02, 2.2, WAIST - 0.02] }),
-    { kind: "lathe", material: "dark", segs: 28, under: true, profile: [[0, 0], [R, 0]] },
-    tube("steel", TUBE_R, WAIST, H, { rings: [8.4], welds: [10.2] }),
-    { kind: "lathe", material: "soot", segs: 28, under: true, only: "mesh", profile: [[TUBE_R * 0.96, H], [0, H]] },
-    { kind: "plate", material: "engine-pale", frame: { o: [0, H + 0.02, 0], u: [1, 0, 0], v: [0, 0, 1], w: [0, 1, 0] }, outline: [[-TUBE_R, -TUBE_R], [TUBE_R, -TUBE_R], [TUBE_R, TUBE_R], [-TUBE_R, TUBE_R]], thickness: 0.05, plain: true },
-    array(1),
-    array(-1),
+/** A high-gain antenna: its boom out along `side` Z from the root, and its dish at the end. */
+const antenna = (side) => [
+    strut("engine-pale", [0, 0, 0], [0, 0, side * 2.9], 0.15, 0.15, { plain: false }),
+    ...horn("engine-pale", [0, 0, side * 2.9], [0, 0, side * 3.9], [0.15, 0.4, 0.6], 12, { only: undefined, plain: false }),
 ];
+const FROM = "Cybertron B-127's model for the painted look, one file a part, its wordmark and logos painted out and its door turned shut. This package's plain shapes for the two line looks, from the sourced length and width; where each part begins, and where its arrays and antennas stand, is measured from that model. No lettering or mark is drawn.";
+const painted = (part) => ({ file: `hubble-${part}.glb`, credit: "robo-reboot-hubble" });
 export const HUBBLE_BUILDS = [
     {
         rocket: "hubble",
         variant: "hubble",
-        drawnFrom: "NASA's model for the painted look. This package's plain shapes for the two line looks, from the sourced length and width; its arrays and door are measured from NASA's model. No lettering or mark is drawn.",
-        parts: [{ slot: "telescope", kind: "spacecraft", name: "Hubble Space Telescope", height: H, diameter: R * 2, sourcedDiameter: HUBBLE_WIDE, painted: { file: "hubble-telescope.glb", credit: "nasa-hubble" }, pieces: telescope }],
+        drawnFrom: FROM,
+        parts: [
+            { slot: "aft-shroud", kind: "module", name: "Aft shroud, Hubble", height: AFT, diameter: R * 2, top: [AFT, R * 2], sourcedDiameter: HUBBLE_WIDE, painted: painted("aft-shroud"), pieces: aftShroud },
+            { slot: "equipment-section", kind: "module", name: "Equipment section, Hubble", height: EQUIPMENT, diameter: R * 2, bottom: [0, R * 2], top: [EQUIPMENT, R * 2], sourcedDiameter: HUBBLE_WIDE, painted: painted("equipment-section"), pieces: equipmentSection },
+            { slot: "forward-shell", kind: "module", name: "Forward shell, Hubble", height: FORWARD, diameter: R * 2, bottom: [0, R * 2], top: [FORWARD, SHIELD_R * 2], sourcedDiameter: HUBBLE_WIDE, painted: painted("forward-shell"), pieces: forwardShell },
+            { slot: "light-shield", kind: "module", name: "Light shield, Hubble", height: SHIELD, diameter: SHIELD_R * 2, bottom: [0, SHIELD_R * 2], top: [SHIELD, SHIELD_R * 2], sourcedDiameter: FORWARD_WIDE, painted: painted("light-shield"), pieces: lightShield },
+            { slot: "aperture-door", kind: "module", name: "Aperture door, Hubble", height: DOOR, diameter: SHIELD_R * 2, bottom: [0, SHIELD_R * 2], sourcedDiameter: FORWARD_WIDE, painted: painted("aperture-door"), pieces: apertureDoor },
+            { slot: "array-left", kind: "array", name: "Solar array, left, Hubble", height: 6.2, diameter: 3.67, place: { x: -ARRAY_ROOT, z: 0, y: ARRAY_Y }, sourcedDiameter: ARRAY_WIDE, painted: painted("array-left"), pieces: () => array(-1) },
+            { slot: "array-right", kind: "array", name: "Solar array, right, Hubble", height: 6.2, diameter: 3.67, place: { x: ARRAY_ROOT, z: 0, y: ARRAY_Y }, sourcedDiameter: ARRAY_WIDE, painted: painted("array-right"), pieces: () => array(1) },
+            { slot: "antenna-near", kind: "antenna", name: "High-gain antenna, near side, Hubble", height: 1.2, diameter: 3.9, place: { x: 0, z: ANTENNA_ROOT, y: ANTENNA_Y }, sourcedDiameter: ANTENNA_WIDE, painted: painted("antenna-near"), pieces: () => antenna(1) },
+            { slot: "antenna-far", kind: "antenna", name: "High-gain antenna, far side, Hubble", height: 1.2, diameter: 3.9, place: { x: 0, z: -ANTENNA_ROOT, y: ANTENNA_Y }, sourcedDiameter: ANTENNA_WIDE, painted: painted("antenna-far"), pieces: () => antenna(-1) },
+        ],
     },
 ];

package/dist/model/iss.js

@@ -1,32 +1,118 @@
-// The station in plain shapes, for the line looks: its length and truss are sourced, and where its arrays and modules stand is measured from NASA's model at that scale. Boxes and tubes, few enough for a drawing. The painted look is NASA's model.
+// The station in plain shapes, for the line looks, as parts in slots: its length and truss are sourced, and where each module, segment, array, radiator and visiting craft stands is measured from NASA's model at that
+// scale. Boxes and tubes, few enough for a drawing. The painted look is NASA's model, one file a part. The module run stacks up the axis from Zvezda's aft; the laboratories lie out along ±X from Harmony, the airlock
+// and the visiting craft along ±Z, and the truss, its arrays and its radiators stand where the model has them, each in a frame of its own.
 import { ISS_DRAWN_TALL, ISS_LONG } from "../data/iss.js";
-import { tube } from "./kit.js";
+import { blank } from "../data/types.js";
+import { horn, rod } from "./fleet/detail.js";
+import { taper, tube } from "./kit.js";
 import { strut } from "./pieces.js";
 const SPAN = (ISS_LONG.value ?? 0) / 2;
-const TRUSS_Y = 34;
-const TRUSS = 94 / 2;
-const array = (x, y0, y1) => {
-    const frame = { o: [x, 0, 0], u: [1, 0, 0], v: [0, 1, 0], w: [0, 0, 1] };
-    return { kind: "plate", material: "gold", frame, outline: [[-2.4, y0], [2.4, y0], [2.4, y1], [-2.4, y1]], thickness: 0.1 };
-};
-const station = () => {
-    const out = [strut("engine-pale", [-TRUSS, TRUSS_Y, 0], [TRUSS, TRUSS_Y, 0], 1.5, 1.5, { plain: false })];
-    for (const x of [SPAN - 3, SPAN - 17, -(SPAN - 3), -(SPAN - 17)])
-        out.push(array(x, 0, TRUSS_Y - 2), array(x, TRUSS_Y + 2, ISS_DRAWN_TALL));
-    // the long run of modules, and the crossing ones
-    out.push(tube("white", 2.1, 16, 47, { rings: [24, 34, 40] }));
-    for (const [y, half] of [[20, 7], [44, 8]])
-        out.push(strut("white", [-half, y, 0], [half, y, 0], 3.6, 3.6));
-    // radiators
-    for (const side of [1, -1])
-        out.push({ kind: "plate", material: "white", frame: { o: [side * 22, 0, 0], u: [1, 0, 0], v: [0, 1, 0], w: [0, 0, 1] }, outline: [[-6, 18], [6, 18], [6, TRUSS_Y - 1], [-6, TRUSS_Y - 1]], thickness: 0.1 });
-    return out;
-};
+/** Where the module run's parts begin, from NASA's model at the sourced length, from Zvezda's aft. */
+const ZVEZDA = 11.9;
+const ZARYA = 10.8;
+const UNITY = 4.7;
+const DESTINY = 6.3;
+const HARMONY = 5.6;
+/** Where the truss, the laboratories, the airlock and the visiting craft are rooted, from Zvezda's aft. */
+const TRUSS_Y = 24.3;
+const TRUSS_Z = 2.5;
+const ARRAYS_Y = 25.8;
+const LAB_Y = 36.3;
+const LAB_ROOT = 1.85;
+const SIDE = 2;
+const MODULE_R = 1.85;
+const CRAFT_R = 1.1;
+const ARRAY_HALF = 2.4;
+/** A round rod drawn in every look: a module or a craft lying along an axis. */
+const pipe = (material, a, b, r) => rod(material, a, b, r, 20, { only: undefined, plain: false });
+const panel = (material, o, half) => ({ kind: "plate", material, frame: { o, u: [1, 0, 0], v: [0, 1, 0], w: [0, 0, 1] }, outline: [[-half[0], -half[1]], [half[0], -half[1]], [half[0], half[1]], [-half[0], half[1]]], thickness: 0.1 });
+const zvezda = () => [
+    tube("white", 2.1, 0, 4.3, { rings: [0.02, 4.28] }),
+    { kind: "lathe", material: "dark", segs: 28, under: true, profile: [[0, 0], [2.1, 0]] },
+    taper("white", 2.1, 4.3, 1.5, 5),
+    tube("white", 1.5, 5, 9.3, { rings: [7] }),
+    tube("white", 1.2, 9.3, 11.3, { rings: [9.32, 11.28] }),
+    tube("engine-pale", 1, 11.3, ZVEZDA),
+    ...[1, -1].map((side) => panel("gold", [side * 6.6, 7.3, 0], [5.4, 1])),
+];
+const zarya = () => [
+    tube("engine-pale", 1, 0, 1.5),
+    taper("white", 1, 1.5, 2, 2.6),
+    tube("white", 2, 2.6, 8.5, { rings: [2.62, 5.5, 8.48] }),
+    taper("white", 2, 8.5, 1.2, 9.2),
+    tube("white", 1.2, 9.2, ZARYA, { rings: [ZARYA - 0.02] }),
+    ...[1, -1].map((side) => panel("gold", [side * 4.5, 4.9, 0], [3.5, 1.5])),
+];
+const unity = () => [tube("white", 1.13, 0, UNITY, { rings: [0.6, 1.5, 3.2, UNITY - 0.02] })];
+const destiny = () => [tube("white", MODULE_R, 0, DESTINY, { rings: [0.02, 3.1, DESTINY - 0.02] })];
+const harmony = () => [tube("white", MODULE_R, 0, 3.9, { rings: [0.02, 3.88] }), taper("white", MODULE_R, 3.9, 1, 5), tube("engine-pale", 1, 5, HARMONY)];
+/** A visiting craft standing on its service module, its docking end at the top. */
+const craftUp = () => [
+    tube("white", CRAFT_R, 0, 2.2, { rings: [0.02, 2.18] }),
+    { kind: "lathe", material: "dark", segs: 24, under: true, profile: [[0, 0], [CRAFT_R, 0]] },
+    taper("white", CRAFT_R, 2.2, 0.9, 3.6),
+    tube("white", CRAFT_R, 3.6, 5.5, { rings: [3.62] }),
+    ...[1, -1].map((side) => panel("gold", [side * 2.6, 1.1, 0], [1.5, 0.7])),
+];
+/** The same craft lying out along `side` Z from its docking end, its wings flat. */
+const craftOut = (side) => [
+    pipe("white", [0, 0, 0], [0, 0, side * 1.9], CRAFT_R),
+    ...horn("white", [0, 0, side * 1.9], [0, 0, side * 3.3], [0.9, 1, 1.1, 1.1], 20, { only: undefined, plain: false }),
+    pipe("white", [0, 0, side * 3.3], [0, 0, side * 5.5], CRAFT_R),
+    ...[1, -1].map((wing) => ({ kind: "plate", material: "gold", frame: { o: [wing * 2.6, 0, side * 4.4], u: [1, 0, 0], v: [0, 0, 1], w: [0, 1, 0] }, outline: [[-1.5, -0.7], [1.5, -0.7], [1.5, 0.7], [-1.5, 0.7]], thickness: 0.1 })),
+];
+/** The airlock lying out along -Z where the model puts it: its equipment lock, then its narrower crew lock. */
+const airlock = () => [pipe("white", [0, 0, 0], [0, 0, -4.1], 1.83), ...horn("white", [0, 0, -4.1], [0, 0, -4.9], [1.83, 1.2, 0.75], 20, { only: undefined, plain: false }), pipe("white", [0, 0, -4.9], [0, 0, -6.2], 0.75)];
+const columbus = () => [pipe("white", [0, 0, 0], [5.75, 0, 0], MODULE_R)];
+/** Kibo lying out along -X: its pressurised module, its logistics module standing on it, and its exposed facility beyond with the arm. */
+const kibo = () => [
+    pipe("white", [0, 0, 0], [-7.45, 0, 0], MODULE_R),
+    pipe("white", [-4.75, 0, 1.6], [-4.75, 0, 5], 1.75),
+    strut("engine-pale", [-7.45, 0, 0], [-15.2, 0, 0], 2, 1.2, { plain: false }),
+];
+/** A truss segment: a square-section beam, `from` to `to` along X, 1.5 m across, in the model's place. */
+const segment = (from, to) => [strut("engine-pale", [from, 1, 0], [to, 1, 0], 1.5, 1.5, { plain: false })];
+/** A pair of solar array wings on their mast: one blanket below the truss and one above, `outer` metres out along X from the mast. */
+const arrays = (outer) => [panel("gold", [outer, -(ARRAYS_Y + 8.7) / 2 - 0.75, 0], [ARRAY_HALF, (ARRAYS_Y + 8.7) / 2 - 0.75]), panel("gold", [outer, (ISS_DRAWN_TALL - ARRAYS_Y - 8.7) / 2 + 0.75, 0], [ARRAY_HALF, (ISS_DRAWN_TALL - ARRAYS_Y - 8.7) / 2 - 0.75])];
+const radiators = () => [-4.2, 0, 4.2].map((x) => panel("white", [x, -7.3, 0], [1.65, 9.7]));
+const FROM = "NASA's model for the painted look, one file a part, with its colours judged from photographs. This package's plain shapes for the two line looks, from the sourced length and truss; where each part stands is measured from NASA's model. No flag or mark is drawn.";
+const painted = (part) => ({ file: `iss-${part}.glb`, credit: "nasa-iss" });
+const across = (what, metres) => blank(`${what}, as NASA's model draws it: ${metres} m.`);
+const CRAFT_WIDE = across("A visiting craft's wings, tip to tip", 8.2);
+const OUTER = SPAN - 50.5 - ARRAY_HALF + 0.4;
 export const ISS_BUILDS = [
     {
         rocket: "iss",
         variant: "iss",
-        drawnFrom: "NASA's model for the painted look, with its colours judged from photographs. This package's plain shapes for the two line looks, from the sourced length and truss; where its arrays and modules stand is measured from NASA's model. No flag or mark is drawn.",
-        parts: [{ slot: "station", kind: "spacecraft", name: "International Space Station", height: ISS_DRAWN_TALL, diameter: SPAN * 2, sourcedDiameter: ISS_LONG, painted: { file: "iss-station.glb", credit: "nasa-iss" }, pieces: station }],
+        drawnFrom: FROM,
+        parts: [
+            { slot: "zvezda", kind: "module", name: "Zvezda service module, ISS", height: ZVEZDA, diameter: 24, top: [ZVEZDA, 2], sourcedDiameter: across("Zvezda's wings, tip to tip", 24), painted: painted("zvezda"), pieces: zvezda },
+            { slot: "zarya", kind: "module", name: "Zarya, ISS", height: ZARYA, diameter: 16, bottom: [0, 2], top: [ZARYA, 2.4], sourcedDiameter: across("Zarya's wings, tip to tip", 16), painted: painted("zarya"), pieces: zarya },
+            { slot: "unity", kind: "module", name: "Unity node with PMA-1, ISS", height: UNITY, diameter: 2.26, bottom: [0, 2.4], top: [UNITY, MODULE_R * 2], sourcedDiameter: across("Unity with PMA-1, which the model draws narrow", 2.26), painted: painted("unity"), pieces: unity },
+            { slot: "destiny", kind: "module", name: "Destiny laboratory, ISS", height: DESTINY, diameter: MODULE_R * 2, bottom: [0, MODULE_R * 2], top: [DESTINY, MODULE_R * 2], sourcedDiameter: across("Destiny", 3.7), painted: painted("destiny"), pieces: destiny },
+            { slot: "harmony", kind: "module", name: "Harmony node with PMA-2, ISS", height: HARMONY, diameter: MODULE_R * 2, bottom: [0, MODULE_R * 2], sourcedDiameter: across("Harmony", 3.7), painted: painted("harmony"), pieces: harmony },
+            { slot: "soyuz-aft", kind: "spacecraft", name: "Visiting craft at Zvezda's aft port, ISS", height: 5.5, diameter: 8.2, place: { x: 0, z: 0, y: -5.5 }, sourcedDiameter: CRAFT_WIDE, painted: painted("soyuz-aft"), pieces: craftUp },
+            { slot: "soyuz-zvezda-nadir", kind: "spacecraft", name: "Visiting craft at Zvezda's nadir port, ISS", height: CRAFT_R * 2, diameter: 8.2, place: { x: 0, z: -SIDE, y: 7 }, sourcedDiameter: CRAFT_WIDE, painted: painted("soyuz-zvezda-nadir"), pieces: () => craftOut(-1) },
+            { slot: "soyuz-zvezda-zenith", kind: "spacecraft", name: "Visiting craft at Zvezda's zenith port, ISS", height: CRAFT_R * 2, diameter: 8.2, place: { x: 0, z: SIDE, y: 10.3 }, sourcedDiameter: CRAFT_WIDE, painted: painted("soyuz-zvezda-zenith"), pieces: () => craftOut(1) },
+            { slot: "soyuz-zarya-nadir", kind: "spacecraft", name: "Visiting craft at Zarya's nadir port, ISS", height: CRAFT_R * 2, diameter: 8.2, place: { x: 0, z: -SIDE, y: 17 }, sourcedDiameter: CRAFT_WIDE, painted: painted("soyuz-zarya-nadir"), pieces: () => craftOut(-1) },
+            { slot: "airlock", kind: "module", name: "Airlock under Unity, as NASA's model places it, ISS", height: 3.66, diameter: 6.2, place: { x: 0, z: -1.3, y: 25.2 }, sourcedDiameter: blank("The airlock's length, lying out from the run, as NASA's model draws it: 6.2 m. Quest is 5.5 m in its article."), painted: painted("airlock"), pieces: airlock },
+            { slot: "columbus", kind: "module", name: "Columbus laboratory, ISS", height: MODULE_R * 2, diameter: 5.75, place: { x: LAB_ROOT, z: 0, y: LAB_Y }, sourcedDiameter: blank("Columbus's length, lying out from Harmony, as NASA's model draws it: 5.75 m. Its article gives 6.9 m."), painted: painted("columbus"), pieces: columbus },
+            { slot: "kibo", kind: "module", name: "Kibo laboratory with its logistics module and exposed facility, ISS", height: 7, diameter: 15.2, place: { x: -LAB_ROOT, z: 0, y: LAB_Y }, sourcedDiameter: blank("Kibo's reach, lying out from Harmony with its exposed facility, as NASA's model draws it: 15.2 m. Its pressurised module is 11.2 m in its article."), painted: painted("kibo"), pieces: kibo },
+            { slot: "truss-s0", kind: "module", name: "Truss segment S0, ISS", height: 2, diameter: 14, place: { x: 0, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The centre segment's length", 14), painted: painted("truss-s0"), pieces: () => segment(-7, 7) },
+            { slot: "truss-s1", kind: "module", name: "Truss segment S1, ISS", height: 2, diameter: 12, place: { x: 7, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The segment's length", 12), painted: painted("truss-s1"), pieces: () => segment(0, 12) },
+            { slot: "truss-p1", kind: "module", name: "Truss segment P1, ISS", height: 2, diameter: 12, place: { x: -7, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The segment's length", 12), painted: painted("truss-p1"), pieces: () => segment(-12, 0) },
+            { slot: "truss-s3-s4", kind: "module", name: "Truss segments S3 and S4, ISS", height: 2, diameter: 14, place: { x: 19, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The segments' length", 14), painted: painted("truss-s3-s4"), pieces: () => segment(0, 14) },
+            { slot: "truss-p3-p4", kind: "module", name: "Truss segments P3 and P4, ISS", height: 2, diameter: 14, place: { x: -19, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The segments' length", 14), painted: painted("truss-p3-p4"), pieces: () => segment(-14, 0) },
+            { slot: "truss-s5", kind: "module", name: "Truss segment S5, ISS", height: 2, diameter: 5, place: { x: 33, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The segment's length", 5), painted: painted("truss-s5"), pieces: () => segment(0, 5) },
+            { slot: "truss-p5", kind: "module", name: "Truss segment P5, ISS", height: 2, diameter: 5, place: { x: -33, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The segment's length", 5), painted: painted("truss-p5"), pieces: () => segment(-5, 0) },
+            { slot: "truss-s6", kind: "module", name: "Truss segment S6, ISS", height: 2, diameter: 13, place: { x: 38, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The segment's length", 13), painted: painted("truss-s6"), pieces: () => segment(0, 13) },
+            { slot: "truss-p6", kind: "module", name: "Truss segment P6, ISS", height: 2, diameter: 13, place: { x: -38, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The segment's length", 13), painted: painted("truss-p6"), pieces: () => segment(-13, 0) },
+            { slot: "arrays-s4", kind: "array", name: "Solar array wings on S4, ISS", height: ISS_DRAWN_TALL, diameter: ARRAY_HALF * 2, place: { x: 35.5, z: TRUSS_Z, y: ARRAYS_Y }, sourcedDiameter: across("A wing's width", ARRAY_HALF * 2), painted: painted("arrays-s4"), pieces: () => arrays(0) },
+            { slot: "arrays-p4", kind: "array", name: "Solar array wings on P4, ISS", height: ISS_DRAWN_TALL, diameter: ARRAY_HALF * 2, place: { x: -35.5, z: TRUSS_Z, y: ARRAYS_Y }, sourcedDiameter: across("A wing's width", ARRAY_HALF * 2), painted: painted("arrays-p4"), pieces: () => arrays(0) },
+            { slot: "arrays-s6", kind: "array", name: "Solar array wings on S6, ISS", height: ISS_DRAWN_TALL, diameter: ARRAY_HALF * 2 + OUTER, place: { x: 50.5, z: TRUSS_Z, y: ARRAYS_Y }, sourcedDiameter: across("A wing's width, standing out from its mast", ARRAY_HALF * 2 + OUTER), painted: painted("arrays-s6"), pieces: () => arrays(OUTER) },
+            { slot: "arrays-p6", kind: "array", name: "Solar array wings on P6, ISS", height: ISS_DRAWN_TALL, diameter: ARRAY_HALF * 2 + OUTER, place: { x: -50.5, z: TRUSS_Z, y: ARRAYS_Y }, sourcedDiameter: across("A wing's width, standing out from its mast", ARRAY_HALF * 2 + OUTER), painted: painted("arrays-p6"), pieces: () => arrays(-OUTER) },
+            { slot: "radiators-starboard", kind: "module", name: "Radiators on S1, ISS", height: 19.4, diameter: 11.7, place: { x: 19, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The three panels, across", 11.7), painted: painted("radiators-starboard"), pieces: radiators },
+            { slot: "radiators-port", kind: "module", name: "Radiators on P1, ISS", height: 19.4, diameter: 11.7, place: { x: -19, z: TRUSS_Z, y: TRUSS_Y }, sourcedDiameter: across("The three panels, across", 11.7), painted: painted("radiators-port"), pieces: radiators },
+        ],
     },
 ];

package/dist/model/jupiterc.js

@@ -1,24 +1,42 @@
-// Jupiter-C in plain shapes, for the line looks: its height and width are sourced, and its outline is measured from NASA's model at that scale. The painted look is NASA's model.
+// Jupiter-C in plain shapes, for the line looks, as four stages in slots: its height and width are sourced, and where each stage begins is measured from NASA's model at that scale. The painted look is NASA's model, one file a stage.
 import { JUPITER_C_WIDE } from "../data/jupiterc.js";
+import { blank } from "../data/types.js";
 import { fins, floor, stripes, taper, tube } from "./kit.js";
 const H = 21.3;
 const R = (JUPITER_C_WIDE.value ?? 0) / 2;
-const vehicle = () => [
-    tube("white", R, 0.42, 3.1, { rings: [0.44, 3.08] }),
-    ...stripes("black", R, 0.42, 3.1, [0, 180], 60),
+/** Where each stage begins, from NASA's model at the sourced height: the tail unit, the Redstone body, the spinning tub and the top stage. The tub nests a little in the body's top, and the top stage in the tub's. */
+const TAIL = 3.095;
+const BODY = 15.03;
+const TUB = 1.442;
+const TUB_NEST = 0.173;
+const TOP_NEST = 0.022;
+const TOP = H - (TAIL + BODY + TUB - TUB_NEST) + TOP_NEST;
+const TUB_R = 0.48;
+const TOP_R = 0.167;
+const FINS_WIDE = blank("1.8 m across its body, the sourced width; 2.9 m across its fins, from NASA's model.");
+const TUB_WIDE = blank("The tub's width has no figure in its article: NASA's model at the sourced height gives 0.96 m.");
+const TOP_WIDE = blank("The top stage's width has no figure in its article: NASA's model at the sourced height gives 0.33 m.");
+const tail = () => [
+    tube("white", R, 0.42, TAIL, { rings: [0.44, TAIL - 0.02] }),
+    ...stripes("black", R, 0.42, TAIL, [0, 180], 60),
     floor(R, 0.42),
     ...fins("engine-pale", R, [45, 135, 225, 315], [[0, 0.9], [0.5, 0.1], [0.55, 0.9], [0, 2.9]], 0.06),
-    tube("steel", R, 3.1, 14.6, { rings: [9.2], welds: [6, 12] }),
-    taper("steel", R, 14.6, 0.47, 18.2, { rings: [14.62] }),
-    taper("steel", 0.47, 18.2, 0.17, 19.4),
-    tube("engine-pale", 0.17, 19.4, H - 0.4),
-    taper("engine-pale", 0.17, H - 0.4, 0.02, H),
 ];
+const body = () => [tube("steel", R, 0, 11.5, { rings: [6.1], welds: [2.9, 8.9] }), taper("steel", R, 11.5, TUB_R, BODY, { rings: [11.52] })];
+const tub = () => [tube("engine-pale", TUB_R, 0, 0.85, { rings: [0.02, 0.83] }), taper("engine-pale", TUB_R, 0.85, 0.3, 0.95), tube("engine-pale", 0.3, 0.95, TUB, { rings: [TUB - 0.02] })];
+const top = () => [tube("engine-pale", TOP_R, 0, TOP - 0.4), taper("engine-pale", TOP_R, TOP - 0.4, 0.02, TOP)];
+const FROM = "NASA's model for the painted look, its lettering removed, one file a stage. This package's plain shapes for the two line looks, from the sourced height and width; where each stage begins is measured from NASA's model. No lettering is drawn.";
+const painted = (stage) => ({ file: `jupiter-c-${stage}.glb`, credit: "nasa-jupiter-c" });
 export const JUPITER_C_BUILDS = [
     {
         rocket: "jupiter-c",
         variant: "jupiter-c",
-        drawnFrom: "NASA's model for the painted look, its lettering removed. This package's plain shapes for the two line looks, from the sourced height and width. No lettering is drawn.",
-        parts: [{ slot: "vehicle", kind: "first-stage", name: "Jupiter-C", height: H, diameter: R * 2, sourcedDiameter: JUPITER_C_WIDE, painted: { file: "jupiter-c-vehicle.glb", credit: "nasa-jupiter-c" }, pieces: vehicle }],
+        drawnFrom: FROM,
+        parts: [
+            { slot: "tail", kind: "tail", name: "Tail unit with its four fins, Jupiter-C", height: TAIL, diameter: R * 2 + 1.1, top: [TAIL, R * 2], sourcedDiameter: FINS_WIDE, painted: painted("tail"), pieces: tail },
+            { slot: "first-stage", kind: "first-stage", name: "Redstone first stage, Jupiter-C", height: BODY, diameter: R * 2, bottom: [0, R * 2], top: [BODY, TUB_R * 2], sourcedDiameter: JUPITER_C_WIDE, painted: painted("first-stage"), pieces: body },
+            { slot: "tub", kind: "second-stage", name: "Spinning tub with stages 2 and 3, Jupiter-C", height: TUB, diameter: TUB_R * 2, bottom: [TUB_NEST, TUB_R * 2], top: [TUB, TOP_R * 2], sourcedDiameter: TUB_WIDE, painted: painted("tub"), pieces: tub },
+            { slot: "fourth-stage", kind: "fourth-stage", name: "Fourth stage with Explorer 1, Jupiter-C", height: TOP, diameter: TOP_R * 2, bottom: [TOP_NEST, TOP_R * 2], sourcedDiameter: TOP_WIDE, painted: painted("fourth-stage"), pieces: top },
+        ],
     },
 ];

package/dist/model/registry.js

@@ -35,6 +35,8 @@ import { ISS_VARIANTS } from "../data/iss.js";
 import { ISS_BUILDS } from "./iss.js";
 import { HUBBLE_VARIANTS } from "../data/hubble.js";
 import { HUBBLE_BUILDS } from "./hubble.js";
+import { TIANGONG_VARIANTS } from "../data/tiangong.js";
+import { TIANGONG_BUILDS } from "./tiangong.js";
 import { DRONE_VARIANTS } from "../data/drone.js";
 import { DRONE_BUILDS } from "./drone.js";
 import { DRAGON_INSIDE_BUILDS } from "./dragoninside.js";
@@ -146,8 +148,8 @@ const figure = (value, source) => ({ value, source });
 entries.push({ record: { id: "falcon-heavy-falcon-heavy-centre", kind: "first-stage", name: "Falcon Heavy centre core, with its upper stage and fairing", rocket: "falcon-heavy", trueTo: ["falcon-heavy"], height: 70, diameter: 5.2, sourced: { height: figure(70, "wikipedia-falcon-heavy"), diameter: { ...blankFigure, note: "3.7 m the core; 5.2 m the fairing." } }, joints: {}, painted: PAINTED["falcon-heavy-falcon-heavy-centre"], drawnFrom: FH_FROM }, pieces: () => centreCore(70, 1.85) }, { record: { id: "falcon-heavy-falcon-heavy-side-left", kind: "first-stage", name: "Falcon Heavy side booster, left", rocket: "falcon-heavy", trueTo: ["falcon-heavy"], height: FH_SIDE_HEIGHT, diameter: 3.7, strapOn: { x: -FH_OFFSET, z: 0 }, sourced: { height: blankFigure, diameter: figure(3.7, "wikipedia-falcon-heavy") }, joints: {}, painted: PAINTED["falcon-heavy-falcon-heavy-side-left"], drawnFrom: FH_FROM }, pieces: () => sideBooster(FH_SIDE_HEIGHT, 1.85, -1) }, { record: { id: "falcon-heavy-falcon-heavy-side-right", kind: "first-stage", name: "Falcon Heavy side booster, right", rocket: "falcon-heavy", trueTo: ["falcon-heavy"], height: FH_SIDE_HEIGHT, diameter: 3.7, strapOn: { x: FH_OFFSET, z: 0 }, sourced: { height: blankFigure, diameter: figure(3.7, "wikipedia-falcon-heavy") }, joints: {}, painted: PAINTED["falcon-heavy-falcon-heavy-side-right"], drawnFrom: FH_FROM }, pieces: () => sideBooster(FH_SIDE_HEIGHT, 1.85, 1) }, { record: { id: "grasshopper-grasshopper-vehicle", kind: "test-vehicle", name: "Grasshopper, test vehicle", rocket: "grasshopper", trueTo: ["grasshopper"], height: 32, diameter: 3.2, sourced: { height: figure(32, "wikipedia-grasshopper"), diameter: blankFigure }, joints: {}, painted: PAINTED["grasshopper-grasshopper-vehicle"], drawnFrom: "This package's code for the two line looks, proportions taken from Echo_3's low-poly model at the sourced height; that model for the painted look." }, pieces: () => grasshopper(32) });
 // ---------------------------------------------------------------------------------------------------------------------------------
 // Rockets drawn wholly by this package's code, from their tables
-const stackFacts = [...DRONE_VARIANTS, ...HUBBLE_VARIANTS, ...ISS_VARIANTS, ...JUPITER_C_VARIANTS, ...MERCURY_VARIANTS, ...GEMINI_VARIANTS, ...APOLLO_SOYUZ_VARIANTS, ...LUNAR_MODULE_VARIANTS, ...STARBASE_VARIANTS, ...DRAGON_VARIANTS, ...TOWER_VARIANTS, ...DRONESHIP_VARIANTS, ...LANDING_ZONE_VARIANTS, ...SOYUZ_VARIANTS, ...NEW_GLENN_VARIANTS, ...ELECTRON_VARIANTS, ...SLS_VARIANTS, ...FALCON_1_VARIANTS, ...SATURN_V_VARIANTS, ...SHUTTLE_VARIANTS, ...SHIP_02_VARIANTS];
-const stacks = [...DRONE_BUILDS, ...HUBBLE_BUILDS, ...ISS_BUILDS, ...JUPITER_C_BUILDS, ...MERCURY_BUILDS, ...GEMINI_BUILDS, ...APOLLO_SOYUZ_BUILDS, ...LUNAR_MODULE_BUILDS, ...STARBASE_BUILDS, ...DRAGON_INSIDE_BUILDS, ...TOWER_BUILDS, ...DRONESHIP_BUILDS, ...LANDING_ZONE_BUILDS, ...SOYUZ_BUILDS, ...NEW_GLENN_BUILDS, ...ELECTRON_BUILDS, ...SLS_BUILDS, ...FALCON_1_BUILDS, ...SATURN_V_BUILDS, ...SHUTTLE_BUILDS, ...SHIP_02_BUILDS];
+const stackFacts = [...DRONE_VARIANTS, ...HUBBLE_VARIANTS, ...ISS_VARIANTS, ...TIANGONG_VARIANTS, ...JUPITER_C_VARIANTS, ...MERCURY_VARIANTS, ...GEMINI_VARIANTS, ...APOLLO_SOYUZ_VARIANTS, ...LUNAR_MODULE_VARIANTS, ...STARBASE_VARIANTS, ...DRAGON_VARIANTS, ...TOWER_VARIANTS, ...DRONESHIP_VARIANTS, ...LANDING_ZONE_VARIANTS, ...SOYUZ_VARIANTS, ...NEW_GLENN_VARIANTS, ...ELECTRON_VARIANTS, ...SLS_VARIANTS, ...FALCON_1_VARIANTS, ...SATURN_V_VARIANTS, ...SHUTTLE_VARIANTS, ...SHIP_02_VARIANTS];
+const stacks = [...DRONE_BUILDS, ...HUBBLE_BUILDS, ...ISS_BUILDS, ...TIANGONG_BUILDS, ...JUPITER_C_BUILDS, ...MERCURY_BUILDS, ...GEMINI_BUILDS, ...APOLLO_SOYUZ_BUILDS, ...LUNAR_MODULE_BUILDS, ...STARBASE_BUILDS, ...DRAGON_INSIDE_BUILDS, ...TOWER_BUILDS, ...DRONESHIP_BUILDS, ...LANDING_ZONE_BUILDS, ...SOYUZ_BUILDS, ...NEW_GLENN_BUILDS, ...ELECTRON_BUILDS, ...SLS_BUILDS, ...FALCON_1_BUILDS, ...SATURN_V_BUILDS, ...SHUTTLE_BUILDS, ...SHIP_02_BUILDS];
 for (const build of stacks)
     for (const part of build.parts) {
         const { height, diameter } = facts(stackFacts, build.variant, part.slot);

package/dist/model/tiangong.d.ts

@@ -0,0 +1,2 @@
+import type { StackBuild } from "./stacks.ts";
+export declare const TIANGONG_BUILDS: readonly StackBuild[];

package/dist/model/tiangong.js

@@ -0,0 +1,109 @@
+// Tiangong in plain shapes, for the line looks, as parts in slots: every length and width is sourced, and where the node's ports and the wings stand is judged from the licensed model and photographs. The painted look is
+// that model, one file a part. Tianhe stands on end with its node and the forward Shenzhou stacked above it; Tianzhou hangs under its aft; the laboratories run out along ±X from the node, Wentian to the left, and the nadir Shenzhou out along +Z.
+import { LAB_LONG, LAB_WIDE, SHENZHOU_LONG, SHENZHOU_WIDE, SHENZHOU_WINGS, TIANHE_WIDE, TIANZHOU_WIDE, TIANZHOU_WINGS, WING_SPAN } from "../data/tiangong.js";
+import { blank } from "../data/types.js";
+import { horn, rod } from "./fleet/detail.js";
+import { taper, tube } from "./kit.js";
+import { strut } from "./pieces.js";
+const TIANHE_R = (TIANHE_WIDE.value ?? 0) / 2;
+const LAB_R = (LAB_WIDE.value ?? 0) / 2;
+const SHENZHOU_R = (SHENZHOU_WIDE.value ?? 0) / 2;
+const TIANZHOU_R = (TIANZHOU_WIDE.value ?? 0) / 2;
+/** Tianhe's body and its node, as the model divides the sourced 16.6 m. */
+const TIANHE = 12.2;
+const HUB = 4.4;
+const LAB = 17.9;
+const SHENZHOU = 9.25;
+const TIANZHOU = 10.6;
+/** The narrow cylinder at Tianhe's forward end and the node, and the ports' rings. */
+const NECK_R = 1.55;
+const PORT_R = 1.4;
+/** Where the node's side ports stand: the laboratories' and the nadir Shenzhou's axis, up the stack, and the collars' reach. */
+const HUB_PORT_Y = TIANHE + 2.2;
+const COLLAR = 1.66;
+/** A wing: half the sourced span, and its width from the sourced area. */
+const WING = (WING_SPAN.value ?? 0) / 2;
+const WING_WIDE = 4;
+const HUB_WIDE = blank("The node's width has no figure in a source read here: 3.3 m across its collars as drawn.");
+const TIANHE_WINGS_WIDE = blank("Tianhe's two wings have no size in a source read here: the model's reach 11.6 m each side, at Tianhe's scale.");
+const LAB_WINGS_WIDE = blank("4 m wide: the sourced 110 m² of cells over a 27.8 m wing.");
+/** A round rod drawn in every look: a module or a craft lying along an axis. */
+const pipe = (material, a, b, r) => rod(material, a, b, r, 24, { only: undefined, plain: false });
+/** A flat panel in a frame: a solar wing. */
+const panel = (o, u, v, w, half, ribs = true) => ({ kind: "plate", material: "gold", frame: { o, u, v, w }, outline: [[-half[0], -half[1]], [half[0], -half[1]], [half[0], half[1]], [-half[0], half[1]]], thickness: 0.08, ...(ribs ? { ribs: [[[0, -half[1]], [0, half[1]]]] } : {}) });
+const tianhe = () => [
+    tube("white", TIANHE_R * 0.75, 0, 1.2, { rings: [0.02] }),
+    taper("white", TIANHE_R * 0.75, 1.2, TIANHE_R, 2.4),
+    tube("white", TIANHE_R, 2.4, 9.6, { rings: [2.42, 6, 9.58] }),
+    taper("white", TIANHE_R, 9.6, NECK_R, 10.3),
+    tube("white", NECK_R, 10.3, TIANHE, { rings: [TIANHE - 0.02] }),
+    { kind: "lathe", material: "dark", segs: 28, under: true, profile: [[0, 0], [TIANHE_R * 0.75, 0]] },
+];
+/** The node: a short neck, the sphere-like hub with its four side collars, and the forward port. */
+const hub = () => [
+    tube("white", NECK_R, 0, 0.8),
+    taper("white", NECK_R, 0.8, NECK_R + 0.15, 1.2),
+    tube("white", NECK_R + 0.15, 1.2, 3.2, { rings: [2.2] }),
+    taper("white", NECK_R + 0.15, 3.2, PORT_R, 3.7),
+    tube("engine-pale", PORT_R, 3.7, HUB, { rings: [HUB - 0.02] }),
+    ...[1, -1].map((side) => strut("engine-pale", [side * NECK_R, 2.2, 0], [side * COLLAR, 2.2, 0], 2.6, 2.6, { plain: false })),
+    strut("engine-pale", [0, 2.2, NECK_R], [0, 2.2, COLLAR], 2.6, 2.6, { plain: false }),
+    strut("white", [0, 2.2, -NECK_R], [0, 2.2, -COLLAR], 2.6, 2.6, { plain: false }),
+];
+/** Shenzhou standing on its service module: service module, the bell of the re-entry module, the orbital module and its docking collar, with its two wings on the service module. */
+const shenzhouUp = () => [
+    tube("white", SHENZHOU_R, 0, 2.94, { rings: [0.02, 2.92] }),
+    { kind: "lathe", material: "dark", segs: 28, under: true, profile: [[0, 0], [SHENZHOU_R, 0]] },
+    taper("white", SHENZHOU_R, 2.94, 1.05, 5.44, { rings: [2.96] }),
+    tube("white", 1.1, 5.44, 8.24, { rings: [5.46, 8.22] }),
+    tube("engine-pale", 0.7, 8.24, SHENZHOU),
+    ...[1, -1].map((side) => panel([side * (SHENZHOU_R + 3.55), 1.5, 0], [1, 0, 0], [0, 1, 0], [0, 0, 1], [3.55, 1.0])),
+];
+/** The same craft lying out along +Z from its docking collar, as it hangs under the nadir port. */
+const shenzhouOut = () => [
+    pipe("engine-pale", [0, 0, 0], [0, 0, 1.01], 0.7),
+    pipe("white", [0, 0, 1.01], [0, 0, 3.81], 1.1),
+    ...horn("white", [0, 0, 3.81], [0, 0, 6.31], [1.05, 1.2, 1.35, 1.4, 1.4], 24, { only: undefined, plain: false }),
+    pipe("white", [0, 0, 6.31], [0, 0, SHENZHOU], SHENZHOU_R),
+    ...[1, -1].map((side) => panel([side * (SHENZHOU_R + 3.55), 0, 7.75], [1, 0, 0], [0, 0, 1], [0, -1, 0], [3.55, 1.0])),
+];
+/** Tianzhou standing on its propulsion module, its cargo module above with the docking end at the top, and its two wings on the propulsion module. */
+const tianzhou = () => [
+    tube("white", 1.2, 0, 3.6, { rings: [0.02, 3.58] }),
+    { kind: "lathe", material: "dark", segs: 28, under: true, profile: [[0, 0], [1.2, 0]] },
+    taper("white", 1.2, 3.6, TIANZHOU_R, 4.2),
+    tube("white", TIANZHOU_R, 4.2, TIANZHOU - 0.3, { rings: [4.22, 7.4, TIANZHOU - 0.32] }),
+    tube("engine-pale", 0.7, TIANZHOU - 0.3, TIANZHOU),
+    ...[1, -1].map((side) => panel([side * 4.45, 1.8, 0], [1, 0, 0], [0, 1, 0], [0, 0, 1], [3.0, 1.2])),
+];
+/** A laboratory lying out along `side` X from the node's collar: its big cylinder, then its narrower resource section at the far end. */
+const lab = (side) => [
+    pipe("white", [0, 0, 0], [side * 12, 0, 0], LAB_R),
+    ...horn("white", [side * 12, 0, 0], [side * 12.8, 0, 0], [LAB_R, 1.8], 24, { only: undefined, plain: false }),
+    pipe("white", [side * 12.8, 0, 0], [side * LAB, 0, 0], 1.5),
+];
+/** A laboratory's two wings, up and down from its resource section, each half the sourced span. */
+const labWings = () => [1, -1].map((up) => panel([0, up * (2.5 + (WING - 2.5) / 2), 0], [1, 0, 0], [0, 1, 0], [0, 0, 1], [WING_WIDE / 2, (WING - 2.5) / 2]));
+/** Tianhe's two wings, out along ±X, as the model draws them. */
+const tianheWings = () => [1, -1].map((side) => panel([side * 7.5, 0, 0], [1, 0, 0], [0, 1, 0], [0, 0, 1], [4.1, 2.7]));
+const FROM = "w29572227's model for the painted look, one file a part, its flags and mark left out and each module at its own sourced size. This package's plain shapes for the two line looks, from the sourced lengths and widths; where the ports and the wings stand is judged from that model and photographs. No flag or mark is drawn.";
+const painted = (part) => ({ file: `tiangong-${part}.glb`, credit: "w29572227-tiangong" });
+export const TIANGONG_BUILDS = [
+    {
+        rocket: "tiangong",
+        variant: "tiangong",
+        drawnFrom: FROM,
+        parts: [
+            { slot: "tianhe", kind: "module", name: "Tianhe core module, Tiangong", height: TIANHE, diameter: TIANHE_R * 2, top: [TIANHE, NECK_R * 2], sourcedDiameter: TIANHE_WIDE, painted: painted("tianhe"), pieces: tianhe },
+            { slot: "hub", kind: "module", name: "Tianhe's docking node, Tiangong", height: HUB, diameter: COLLAR * 2, bottom: [0, NECK_R * 2], top: [HUB, PORT_R * 2], sourcedDiameter: HUB_WIDE, painted: painted("hub"), pieces: hub },
+            { slot: "shenzhou-forward", kind: "spacecraft", name: "Shenzhou at the forward port, Tiangong", height: SHENZHOU, diameter: SHENZHOU_WINGS.value ?? 0, bottom: [0, PORT_R * 2], sourcedDiameter: SHENZHOU_WINGS, painted: painted("shenzhou-forward"), pieces: shenzhouUp },
+            { slot: "tianzhou", kind: "spacecraft", name: "Tianzhou at the aft port, Tiangong", height: TIANZHOU, diameter: TIANZHOU_WINGS.value ?? 0, place: { x: 0, z: 0, y: -TIANZHOU }, sourcedDiameter: TIANZHOU_WINGS, painted: painted("tianzhou"), pieces: tianzhou },
+            { slot: "wentian", kind: "module", name: "Wentian laboratory module, Tiangong", height: LAB_R * 2, diameter: LAB, place: { x: -COLLAR, z: 0, y: HUB_PORT_Y }, sourcedDiameter: LAB_LONG, painted: painted("wentian"), pieces: () => lab(-1) },
+            { slot: "mengtian", kind: "module", name: "Mengtian laboratory module, Tiangong", height: LAB_R * 2, diameter: LAB, place: { x: COLLAR, z: 0, y: HUB_PORT_Y }, sourcedDiameter: LAB_LONG, painted: painted("mengtian"), pieces: () => lab(1) },
+            { slot: "tianhe-arrays", kind: "array", name: "Tianhe's solar wings, Tiangong", height: 5.4, diameter: 23.2, place: { x: 0, z: 0, y: 8.7 }, sourcedDiameter: TIANHE_WINGS_WIDE, painted: painted("tianhe-arrays"), pieces: tianheWings },
+            { slot: "wentian-arrays", kind: "array", name: "Wentian's solar wings, Tiangong", height: WING * 2, diameter: WING_WIDE, place: { x: -(COLLAR + LAB - 2.5), z: 0, y: HUB_PORT_Y }, sourcedDiameter: LAB_WINGS_WIDE, painted: painted("wentian-arrays"), pieces: labWings },
+            { slot: "mengtian-arrays", kind: "array", name: "Mengtian's solar wings, Tiangong", height: WING * 2, diameter: WING_WIDE, place: { x: COLLAR + LAB - 2.5, z: 0, y: HUB_PORT_Y }, sourcedDiameter: LAB_WINGS_WIDE, painted: painted("mengtian-arrays"), pieces: labWings },
+            { slot: "shenzhou-nadir", kind: "spacecraft", name: "Shenzhou at the nadir port, Tiangong", height: SHENZHOU_WINGS.value ?? 0, diameter: SHENZHOU, place: { x: 0, z: COLLAR, y: HUB_PORT_Y }, sourcedDiameter: SHENZHOU_LONG, painted: painted("shenzhou-nadir"), pieces: shenzhouOut },
+        ],
+    },
+];

package/dist/parts.d.ts

@@ -11,7 +11,7 @@ import type { Figure } from "./data/types.ts";
  * console.log(kind);
  * ```
  */
-export type PartKind = "booster" | "first-stage" | "ship" | "second-stage" | "fairing" | "capsule" | "trunk" | "engine" | "fin" | "flap" | "ring" | "test-vehicle" | "third-stage" | "adapter" | "service-module" | "tower" | "tank" | "solid-booster" | "liquid-booster" | "orbiter" | "deck" | "mount" | "arms" | "site" | "spacecraft" | "module";
+export type PartKind = "booster" | "first-stage" | "ship" | "second-stage" | "fairing" | "capsule" | "trunk" | "engine" | "fin" | "flap" | "ring" | "test-vehicle" | "third-stage" | "fourth-stage" | "tail" | "adapter" | "service-module" | "tower" | "tank" | "solid-booster" | "liquid-booster" | "orbiter" | "deck" | "mount" | "arms" | "site" | "spacecraft" | "module" | "array" | "antenna";
 /**
  * Where a part mates. Every part's origin is the middle of its base on its axis, at its lowest point; Y is up and the windward side faces +Z, in metres.
  *

package/dist/rockets.js

@@ -20,6 +20,7 @@ import { MERCURY_VARIANTS } from "./data/mercury.js";
 import { JUPITER_C_VARIANTS } from "./data/jupiterc.js";
 import { ISS_VARIANTS } from "./data/iss.js";
 import { HUBBLE_VARIANTS } from "./data/hubble.js";
+import { TIANGONG_VARIANTS } from "./data/tiangong.js";
 import { STARSHIP_VARIANTS } from "./data/starship.js";
 import { FLEET_KIT_ROCKETS, FLEET_SLOT_NAMES } from "./data/fleet.js";
 import { CONCEPT_SLOT_NAMES, KAMINARI_VARIANTS } from "./data/kaminari-concepts.js";
@@ -29,7 +30,7 @@ import { DRONE_VARIANTS } from "./data/drone.js";
 import { ARIAKE_VARIANTS, SHIP_03_INSET_ROCKET, SHIP_03_SLOT_NAMES, SHIP_03_VARIANTS } from "./data/ship-03.js";
 import { MADE_BY } from "./data/makers.js";
 /** Craft that fly in space: seen from any side, from straight above or below. Everything else stands on the ground or the sea, and keeps the ground in view. */
-const IN_SPACE = new Set(["dragon", "lunar-module", "apollo-soyuz", "gemini", "mercury", "iss", "hubble"]);
+const IN_SPACE = new Set(["dragon", "lunar-module", "apollo-soyuz", "gemini", "mercury", "iss", "hubble", "tiangong"]);
 /**
  * Whether a craft flies in space: the same ones that may be seen from straight above or below, including the fleet. A rocket or a place on the ground does not. On the compare page one of these stands on a marked plinth, so it is not read as a rocket on a pad.
  *
@@ -76,6 +77,7 @@ export const ROCKETS = withTilt({
     "jupiter-c": { id: "jupiter-c", name: "Jupiter-C", status: "built", ...MADE_BY["jupiter-c"], variants: JUPITER_C_VARIANTS, defaultVariant: "jupiter-c" },
     "iss": { id: "iss", name: "International Space Station", status: "built", ...MADE_BY["iss"], variants: ISS_VARIANTS, defaultVariant: "iss" },
     "hubble": { id: "hubble", name: "Hubble Space Telescope", status: "built", ...MADE_BY["hubble"], variants: HUBBLE_VARIANTS, defaultVariant: "hubble" },
+    tiangong: { id: "tiangong", name: "Tiangong 天宮", status: "built", ...MADE_BY["tiangong"], variants: TIANGONG_VARIANTS, defaultVariant: "tiangong" },
     droneship: { id: "droneship", name: "Drone ships", status: "built", ...MADE_BY["droneship"], variants: DRONESHIP_VARIANTS, defaultVariant: "ocisly" },
     "landing-zone": { id: "landing-zone", name: "Landing zones", status: "built", ...MADE_BY["landing-zone"], variants: LANDING_ZONE_VARIANTS, defaultVariant: "lz-1" },
     "launch-tower": { id: "launch-tower", name: "Launch tower", status: "built", ...MADE_BY["launch-tower"], variants: TOWER_VARIANTS, defaultVariant: "stack" },
@@ -184,8 +186,55 @@ export const SLOT_NAMES = {
     "ascent": "Ascent stage",
     "csm": "Apollo command and service module",
     "docking-module": "Docking module",
-    "station": "The station",
-    "telescope": "The telescope",
+    tail: "Tail unit",
+    tub: "Spinning tub",
+    "fourth-stage": "Fourth stage",
+    "aft-shroud": "Aft shroud",
+    "equipment-section": "Equipment section",
+    "forward-shell": "Forward shell",
+    "light-shield": "Light shield",
+    "aperture-door": "Aperture door",
+    "array-left": "Solar array, left",
+    "array-right": "Solar array, right",
+    "antenna-near": "High-gain antenna, near side",
+    "antenna-far": "High-gain antenna, far side",
+    tianhe: "Tianhe core module",
+    hub: "Docking node",
+    "shenzhou-forward": "Shenzhou, forward port",
+    "shenzhou-nadir": "Shenzhou, nadir port",
+    tianzhou: "Tianzhou, aft port",
+    wentian: "Wentian laboratory",
+    mengtian: "Mengtian laboratory",
+    "tianhe-arrays": "Tianhe's solar wings",
+    "wentian-arrays": "Wentian's solar wings",
+    "mengtian-arrays": "Mengtian's solar wings",
+    zvezda: "Zvezda",
+    zarya: "Zarya",
+    unity: "Unity with PMA-1",
+    destiny: "Destiny",
+    harmony: "Harmony with PMA-2",
+    "soyuz-aft": "Visiting craft, Zvezda's aft port",
+    "soyuz-zvezda-nadir": "Visiting craft, Zvezda's nadir port",
+    "soyuz-zvezda-zenith": "Visiting craft, Zvezda's zenith port",
+    "soyuz-zarya-nadir": "Visiting craft, Zarya's nadir port",
+    airlock: "Airlock",
+    columbus: "Columbus",
+    kibo: "Kibo",
+    "truss-s0": "Truss S0",
+    "truss-s1": "Truss S1",
+    "truss-p1": "Truss P1",
+    "truss-s3-s4": "Truss S3 and S4",
+    "truss-p3-p4": "Truss P3 and P4",
+    "truss-s5": "Truss S5",
+    "truss-p5": "Truss P5",
+    "truss-s6": "Truss S6",
+    "truss-p6": "Truss P6",
+    "arrays-s4": "Solar arrays on S4",
+    "arrays-p4": "Solar arrays on P4",
+    "arrays-s6": "Solar arrays on S6",
+    "arrays-p6": "Solar arrays on P6",
+    "radiators-starboard": "Radiators, starboard",
+    "radiators-port": "Radiators, port",
     ground: "The ground and the road",
     pads: "The pads",
     "tank-farm": "The tank farm",

package/dist/thrusters.js

@@ -92,19 +92,19 @@ function dragonJets(variant) {
     return out;
 }
 /**
- * Zvezda's aft end, in the station's plain model: the module tube runs from y = 16, and that low end is aft.
+ * Zvezda's aft end, in the station's plain model: Zvezda is the foot of the module run, and its low end is aft.
  * Two large bells side by side, then a ring of small attitude jets.
  */
 function issJets() {
     const out = [
-        jet("station", [0.7, 15.2, 0], [0, -1, 0], "hypergolic", 0.9),
-        jet("station", [-0.7, 15.2, 0], [0, -1, 0], "hypergolic", 0.9),
+        jet("zvezda", [0.7, 0.3, 0], [0, -1, 0], "hypergolic", 0.9),
+        jet("zvezda", [-0.7, 0.3, 0], [0, -1, 0], "hypergolic", 0.9),
     ];
     for (let i = 0; i < 8; i++) {
         const angle = (i / 8) * Math.PI * 2;
         const c = Math.cos(angle);
         const s = Math.sin(angle);
-        out.push(jet("station", [c * 2.25, 16.3, s * 2.25], [c * 0.6, -0.8, s * 0.6], "hypergolic", 0.22));
+        out.push(jet("zvezda", [c * 2.15, 1.4, s * 2.15], [c * 0.6, -0.8, s * 0.6], "hypergolic", 0.22));
     }
     return out;
 }