@jjrawlins/cdk-ami-builder 0.0.65 → 0.0.67

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/RunTaskCommand.d.ts

@@ -29,23 +29,27 @@ declare const RunTaskCommand_base: {
 /**
  * <p>Starts a new task using the specified task definition.</p>
  *          <note>
- *             <p>On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.</p>
+ *             <p>On March 21, 2024, a change was made to resolve the task definition revision
+ * 				before authorization. When a task definition revision is not specified,
+ * 				authorization will occur using the latest revision of a task definition.</p>
  *          </note>
  *          <note>
  *             <p>Amazon Elastic Inference (EI) is no longer available to customers.</p>
  *          </note>
- *          <p>You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places
- * 			tasks using placement constraints and placement strategies. For more information, see
- * 				<a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *          <p>You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS
+ * 			places tasks using placement constraints and placement strategies. For more information,
+ * 			see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling Tasks</a> in the <i>Amazon Elastic
+ * 				Container Service Developer Guide</i>.</p>
  *          <p>Alternatively, you can use <code>StartTask</code> to use your own scheduler or place
  * 			tasks manually on specific container instances.</p>
- *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or
- * 			updating a service. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when
+ * 			creating or updating a service. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic
+ * 				Container Service Developer Guide</i>.</p>
  *          <p>The Amazon ECS API follows an eventual consistency model. This is because of the
  * 			distributed nature of the system supporting the API. This means that the result of an
- * 			API command you run that affects your Amazon ECS resources might not be immediately visible
- * 			to all subsequent commands you run. Keep this in mind when you carry out an API command
- * 			that immediately follows a previous API command.</p>
+ * 			API command you run that affects your Amazon ECS resources might not be immediately
+ * 			visible to all subsequent commands you run. Keep this in mind when you carry out an API
+ * 			command that immediately follows a previous API command.</p>
  *          <p>To manage eventual consistency, you can do the following:</p>
  *          <ul>
  *             <li>
@@ -63,10 +67,11 @@ declare const RunTaskCommand_base: {
  * 					minutes of wait time.</p>
  *             </li>
  *          </ul>
- *          <p>If you get a <code>ConflictException</code> error, the <code>RunTask</code> request could
- * 			not be processed due to conflicts. The provided <code>clientToken</code> is already in
- * 			use with a different <code>RunTask</code> request. The <code>resourceIds</code> are the
- * 			existing task ARNs which are already associated with the <code>clientToken</code>. </p>
+ *          <p>If you get a <code>ConflictException</code> error, the <code>RunTask</code> request
+ * 			could not be processed due to conflicts. The provided <code>clientToken</code> is
+ * 			already in use with a different <code>RunTask</code> request. The
+ * 				<code>resourceIds</code> are the existing task ARNs which are already associated
+ * 			with the <code>clientToken</code>. </p>
  *          <p>To fix this issue:</p>
  *          <ul>
  *             <li>
@@ -77,11 +82,11 @@ declare const RunTaskCommand_base: {
  * 					set of parameters</p>
  *             </li>
  *          </ul>
- *          <p>If you get a <code>ClientException</code>error, the <code>RunTask</code> could not be processed because you use managed
- * 					scaling and there is a capacity error because the quota of tasks in the
- * 					<code>PROVISIONING</code> per cluster has been reached. For information
- * 					about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
- * 						service quotas</a>.</p>
+ *          <p>If you get a <code>ClientException</code>error, the <code>RunTask</code> could not be
+ * 			processed because you use managed scaling and there is a capacity error because the
+ * 			quota of tasks in the <code>PROVISIONING</code> per cluster has been reached. For
+ * 			information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
+ * 				quotas</a>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -402,8 +407,10 @@ declare const RunTaskCommand_base: {
  *  <p>You don't have authorization to perform the requested action.</p>
  *
  * @throws {@link BlockedException} (client fault)
- *  <p>Your Amazon Web Services account was blocked. For more information, contact <a href="http://aws.amazon.com/contact-us/">
- * 				Amazon Web ServicesSupport</a>.</p>
+ *  <p>Your Amazon Web
+ * 				Services account was blocked. For more information, contact <a href="http://aws.amazon.com/contact-us/">
+ * 				Amazon Web
+ * 					Services Support</a>.</p>
  *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using
@@ -414,13 +421,14 @@ declare const RunTaskCommand_base: {
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>The request could not be processed because of conflict in the current state of the resource. </p>
+ *  <p>The request could not be processed because of conflict in the current state of the
+ * 			resource. </p>
  *
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link PlatformTaskDefinitionIncompatibilityException} (client fault)
  *  <p>The specified platform version doesn't satisfy the required capabilities of the task

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/StartTaskCommand.d.ts

@@ -30,15 +30,19 @@ declare const StartTaskCommand_base: {
  * <p>Starts a new task from the specified task definition on the specified container
  * 			instance or instances.</p>
  *          <note>
- *             <p>On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.</p>
+ *             <p>On March 21, 2024, a change was made to resolve the task definition revision
+ * 				before authorization. When a task definition revision is not specified,
+ * 				authorization will occur using the latest revision of a task definition.</p>
  *          </note>
  *          <note>
  *             <p>Amazon Elastic Inference (EI) is no longer available to customers.</p>
  *          </note>
  *          <p>Alternatively, you can use<code>RunTask</code> to place tasks for you. For more
- * 			information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
- *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or
- * 			updating a service. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ * 			information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling Tasks</a> in the <i>Amazon Elastic
+ * 				Container Service Developer Guide</i>.</p>
+ *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when
+ * 			creating or updating a service. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic
+ * 				Container Service Developer Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -344,8 +348,8 @@ declare const StartTaskCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/StopServiceDeploymentCommand.d.ts

@@ -37,9 +37,9 @@ declare const StopServiceDeploymentCommand_base: {
  * 					for the rollback option. </p>
  *             </li>
  *          </ul>
- *          <p>For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/stop-service-deployment.html">Stopping Amazon ECS
- * 				service deployments</a> in the <i>Amazon Elastic Container Service Developer
- * 			Guide</i>.</p>
+ *          <p>For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/stop-service-deployment.html">Stopping Amazon
+ * 				ECS service deployments</a> in the <i>Amazon Elastic Container Service
+ * 				Developer Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -75,19 +75,22 @@ declare const StopServiceDeploymentCommand_base: {
  * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>The request could not be processed because of conflict in the current state of the resource. </p>
+ *  <p>The request could not be processed because of conflict in the current state of the
+ * 			resource. </p>
  *
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
  *
  * @throws {@link ServiceDeploymentNotFoundException} (client fault)
- *  <p>The service deploy ARN that you specified in the <code>StopServiceDeployment</code> doesn't exist. You can use <code>ListServiceDeployments</code> to retrieve the service deployment ARNs.</p>
+ *  <p>The service deploy ARN that you specified in the <code>StopServiceDeployment</code>
+ * 			doesn't exist. You can use <code>ListServiceDeployments</code> to retrieve the service
+ * 			deployment ARNs.</p>
  *
  * @throws {@link UnsupportedFeatureException} (client fault)
  *  <p>The specified task isn't supported in this Region.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/StopTaskCommand.d.ts

@@ -38,10 +38,10 @@ declare const StopTaskCommand_base: {
  * 			sending a <code>CTRL_SHUTDOWN_EVENT</code>. For more information, see <a href="https://github.com/moby/moby/issues/25982">Unable to react to graceful shutdown
  * 				of (Windows) container #25982</a> on GitHub.</p>
  *          <note>
- *             <p>The default 30-second timeout can be configured on the Amazon ECS container agent with
- * 				the <code>ECS_CONTAINER_STOP_TIMEOUT</code> variable. For more information, see
+ *             <p>The default 30-second timeout can be configured on the Amazon ECS container agent
+ * 				with the <code>ECS_CONTAINER_STOP_TIMEOUT</code> variable. For more information, see
  * 					<a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html">Amazon ECS Container Agent Configuration</a> in the
- * 				<i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ * 					<i>Amazon Elastic Container Service Developer Guide</i>.</p>
  *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -240,8 +240,8 @@ declare const StopTaskCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/SubmitAttachmentStateChangesCommand.d.ts

@@ -28,7 +28,8 @@ declare const SubmitAttachmentStateChangesCommand_base: {
 };
 /**
  * <note>
- *             <p>This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.</p>
+ *             <p>This action is only used by the Amazon ECS agent, and it is not intended for use
+ * 				outside of the agent.</p>
  *          </note>
  *          <p>Sent to acknowledge that an attachment changed states.</p>
  * @example
@@ -73,8 +74,8 @@ declare const SubmitAttachmentStateChangesCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/SubmitContainerStateChangeCommand.d.ts

@@ -28,7 +28,8 @@ declare const SubmitContainerStateChangeCommand_base: {
 };
 /**
  * <note>
- *             <p>This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.</p>
+ *             <p>This action is only used by the Amazon ECS agent, and it is not intended for use
+ * 				outside of the agent.</p>
  *          </note>
  *          <p>Sent to acknowledge that a container changed states.</p>
  * @example

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/SubmitTaskStateChangeCommand.d.ts

@@ -28,7 +28,8 @@ declare const SubmitTaskStateChangeCommand_base: {
 };
 /**
  * <note>
- *             <p>This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.</p>
+ *             <p>This action is only used by the Amazon ECS agent, and it is not intended for use
+ * 				outside of the agent.</p>
  *          </note>
  *          <p>Sent to acknowledge that a task changed states.</p>
  * @example
@@ -107,8 +108,8 @@ declare const SubmitTaskStateChangeCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/TagResourceCommand.d.ts

@@ -71,8 +71,8 @@ declare const TagResourceCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>The specified resource wasn't found.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UntagResourceCommand.d.ts

@@ -65,8 +65,8 @@ declare const UntagResourceCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>The specified resource wasn't found.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateCapacityProviderCommand.d.ts

@@ -28,7 +28,8 @@ declare const UpdateCapacityProviderCommand_base: {
 };
 /**
  * <p>Modifies the parameters for a capacity provider.</p>
- *          <p>These changes only apply to new Amazon ECS Managed Instances, or EC2 instances, not existing ones.</p>
+ *          <p>These changes only apply to new Amazon ECS Managed Instances, or EC2 instances, not
+ * 			existing ones.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -279,8 +280,8 @@ declare const UpdateCapacityProviderCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateClusterCommand.d.ts

@@ -160,8 +160,8 @@ declare const UpdateClusterCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link NamespaceNotFoundException} (client fault)
  *  <p>The specified namespace wasn't found.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateClusterSettingsCommand.d.ts

@@ -140,8 +140,8 @@ declare const UpdateClusterSettingsCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateContainerAgentCommand.d.ts

@@ -30,22 +30,25 @@ declare const UpdateContainerAgentCommand_base: {
  * <p>Updates the Amazon ECS container agent on a specified container instance. Updating the
  * 			Amazon ECS container agent doesn't interrupt running tasks or services on the container
  * 			instance. The process for updating the agent differs depending on whether your container
- * 			instance was launched with the Amazon ECS-optimized AMI or another operating system.</p>
+ * 			instance was launched with the Amazon ECS-optimized AMI or another operating
+ * 			system.</p>
  *          <note>
  *             <p>The <code>UpdateContainerAgent</code> API isn't supported for container instances
- * 				using the Amazon ECS-optimized Amazon Linux 2 (arm64) AMI. To update the container agent,
- * 				you can update the <code>ecs-init</code> package. This updates the agent. For more
- * 				information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/agent-update-ecs-ami.html">Updating the
- * 					Amazon ECS container agent</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ * 				using the Amazon ECS-optimized Amazon Linux 2 (arm64) AMI. To update the container
+ * 				agent, you can update the <code>ecs-init</code> package. This updates the agent. For
+ * 				more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/agent-update-ecs-ami.html">Updating the
+ * 					Amazon ECS container agent</a> in the <i>Amazon Elastic Container
+ * 					Service Developer Guide</i>.</p>
  *          </note>
  *          <note>
  *             <p>Agent updates with the <code>UpdateContainerAgent</code> API operation do not
  * 				apply to Windows container instances. We recommend that you launch new container
  * 				instances to update the agent version in your Windows clusters.</p>
  *          </note>
- *          <p>The <code>UpdateContainerAgent</code> API requires an Amazon ECS-optimized AMI or Amazon
- * 			Linux AMI with the <code>ecs-init</code> service installed and running. For help
- * 			updating the Amazon ECS container agent on other operating systems, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-update.html#manually_update_agent">Manually updating the Amazon ECS container agent</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *          <p>The <code>UpdateContainerAgent</code> API requires an Amazon ECS-optimized AMI or
+ * 			Amazon Linux AMI with the <code>ecs-init</code> service installed and running. For help
+ * 			updating the Amazon ECS container agent on other operating systems, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-update.html#manually_update_agent">Manually updating the Amazon ECS container agent</a> in the <i>Amazon
+ * 				Elastic Container Service Developer Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -162,29 +165,29 @@ declare const UpdateContainerAgentCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link MissingVersionException} (client fault)
- *  <p>Amazon ECS can't determine the current version of the Amazon ECS container agent on the
- * 			container instance and doesn't have enough information to proceed with an update. This
- * 			could be because the agent running on the container instance is a previous or custom
- * 			version that doesn't use our version information.</p>
+ *  <p>Amazon ECS can't determine the current version of the Amazon ECS container agent on
+ * 			the container instance and doesn't have enough information to proceed with an update.
+ * 			This could be because the agent running on the container instance is a previous or
+ * 			custom version that doesn't use our version information.</p>
  *
  * @throws {@link NoUpdateAvailableException} (client fault)
- *  <p>There's no update available for this Amazon ECS container agent. This might be because the
- * 			agent is already running the latest version or because it's so old that there's no
+ *  <p>There's no update available for this Amazon ECS container agent. This might be because
+ * 			the agent is already running the latest version or because it's so old that there's no
  * 			update path to the current version.</p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
  *
  * @throws {@link UpdateInProgressException} (client fault)
- *  <p>There's already a current Amazon ECS container agent update in progress on the container
- * 			instance that's specified. If the container agent becomes disconnected while it's in a
- * 			transitional stage, such as <code>PENDING</code> or <code>STAGING</code>, the update
- * 			process can get stuck in that state. However, when the agent reconnects, it resumes
- * 			where it stopped previously.</p>
+ *  <p>There's already a current Amazon ECS container agent update in progress on the
+ * 			container instance that's specified. If the container agent becomes disconnected while
+ * 			it's in a transitional stage, such as <code>PENDING</code> or <code>STAGING</code>, the
+ * 			update process can get stuck in that state. However, when the agent reconnects, it
+ * 			resumes where it stopped previously.</p>
  *
  * @throws {@link ECSServiceException}
  * <p>Base exception class for all service exceptions from ECS service.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateContainerInstancesStateCommand.d.ts

@@ -37,11 +37,11 @@ declare const UpdateContainerInstancesStateCommand_base: {
  * 				reached an <code>ACTIVE</code> status. If the instance is in any other status, an
  * 				error will be received.</p>
  *          </important>
- *          <p>When you set a container instance to <code>DRAINING</code>, Amazon ECS prevents new tasks
- * 			from being scheduled for placement on the container instance and replacement service
- * 			tasks are started on other container instances in the cluster if the resources are
- * 			available. Service tasks on the container instance that are in the <code>PENDING</code>
- * 			state are stopped immediately.</p>
+ *          <p>When you set a container instance to <code>DRAINING</code>, Amazon ECS prevents new
+ * 			tasks from being scheduled for placement on the container instance and replacement
+ * 			service tasks are started on other container instances in the cluster if the resources
+ * 			are available. Service tasks on the container instance that are in the
+ * 				<code>PENDING</code> state are stopped immediately.</p>
  *          <p>Service tasks on the container instance that are in the <code>RUNNING</code> state are
  * 			stopped and replaced according to the service's deployment configuration parameters,
  * 				<code>minimumHealthyPercent</code> and <code>maximumPercent</code>. You can change
@@ -74,8 +74,8 @@ declare const UpdateContainerInstancesStateCommand_base: {
  *          <p>A container instance has completed draining when it has no more <code>RUNNING</code>
  * 			tasks. You can verify this using <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListTasks.html">ListTasks</a>.</p>
  *          <p>When a container instance has been drained, you can set a container instance to
- * 				<code>ACTIVE</code> status and once it has reached that status the Amazon ECS scheduler
- * 			can begin scheduling tasks on the instance again.</p>
+ * 				<code>ACTIVE</code> status and once it has reached that status the Amazon ECS
+ * 			scheduler can begin scheduling tasks on the instance again.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -204,8 +204,8 @@ declare const UpdateContainerInstancesStateCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateServiceCommand.d.ts

@@ -29,26 +29,32 @@ declare const UpdateServiceCommand_base: {
 /**
  * <p>Modifies the parameters of a service.</p>
  *          <note>
- *             <p>On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.</p>
+ *             <p>On March 21, 2024, a change was made to resolve the task definition revision
+ * 				before authorization. When a task definition revision is not specified,
+ * 				authorization will occur using the latest revision of a task definition.</p>
  *          </note>
  *          <p>For services using the rolling update (<code>ECS</code>) you can update the desired
  * 			count, deployment configuration, network configuration, load balancers, service
  * 			registries, enable ECS managed tags option, propagate tags option, task placement
  * 			constraints and strategies, and task definition. When you update any of these
  * 			parameters, Amazon ECS starts new tasks with the new configuration. </p>
- *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when starting or
- * 			running a task, or when creating or updating a service. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>. You can update
- * 			your volume configurations and trigger a new deployment.
- * 				<code>volumeConfigurations</code> is only supported for REPLICA service and not
- * 			DAEMON service. If you leave <code>volumeConfigurations</code>
+ *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when
+ * 			starting or running a task, or when creating or updating a service. For more
+ * 			information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic
+ * 				Container Service Developer Guide</i>. You can update your volume
+ * 			configurations and trigger a new deployment. <code>volumeConfigurations</code> is only
+ * 			supported for REPLICA service and not DAEMON service. If you leave
+ * 				<code>volumeConfigurations</code>
  *             <code>null</code>, it doesn't trigger a new deployment. For more information on volumes,
- * 			see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ * 			see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic
+ * 				Container Service Developer Guide</i>.</p>
  *          <p>For services using the blue/green (<code>CODE_DEPLOY</code>) deployment controller,
  * 			only the desired count, deployment configuration, health check grace period, task
  * 			placement constraints and strategies, enable ECS managed tags option, and propagate tags
  * 			can be updated using this API. If the network configuration, platform version, task
- * 			definition, or load balancer need to be updated, create a new CodeDeploy deployment. For more
- * 			information, see <a href="https://docs.aws.amazon.com/codedeploy/latest/APIReference/API_CreateDeployment.html">CreateDeployment</a> in the <i>CodeDeploy API Reference</i>.</p>
+ * 			definition, or load balancer need to be updated, create a new CodeDeploy deployment. For
+ * 			more information, see <a href="https://docs.aws.amazon.com/codedeploy/latest/APIReference/API_CreateDeployment.html">CreateDeployment</a> in the <i>CodeDeploy API
+ * 			Reference</i>.</p>
  *          <p>For services using an external deployment controller, you can update only the desired
  * 			count, task placement constraints and strategies, health check grace period, enable ECS
  * 			managed tags option, and propagate tags option, using this API. If the launch type, load
@@ -57,8 +63,10 @@ declare const UpdateServiceCommand_base: {
  *          <p>You can add to or subtract from the number of instantiations of a task definition in a
  * 			service by specifying the cluster that the service is running in and a new
  * 				<code>desiredCount</code> parameter.</p>
- *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when starting or
- * 			running a task, or when creating or updating a service. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when
+ * 			starting or running a task, or when creating or updating a service. For more
+ * 			information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic
+ * 				Container Service Developer Guide</i>.</p>
  *          <p>If you have updated the container image of your application, you can create a new task
  * 			definition with that image and deploy it to your service. The service scheduler uses the
  * 			minimum healthy percent and maximum percent parameters (in the service's deployment
@@ -301,6 +309,10 @@ declare const UpdateServiceCommand_base: {
  *         },
  *       ],
  *     },
+ *     accessLogConfiguration: { // ServiceConnectAccessLogConfiguration
+ *       format: "TEXT" || "JSON", // required
+ *       includeQueryParameters: "DISABLED" || "ENABLED",
+ *     },
  *   },
  *   volumeConfigurations: [ // ServiceVolumeConfigurations
  *     { // ServiceVolumeConfiguration
@@ -574,6 +586,10 @@ declare const UpdateServiceCommand_base: {
  * //               },
  * //             ],
  * //           },
+ * //           accessLogConfiguration: { // ServiceConnectAccessLogConfiguration
+ * //             format: "TEXT" || "JSON", // required
+ * //             includeQueryParameters: "DISABLED" || "ENABLED",
+ * //           },
  * //         },
  * //         serviceConnectResources: [ // ServiceConnectServiceResourceList
  * //           { // ServiceConnectServiceResource
@@ -686,8 +702,8 @@ declare const UpdateServiceCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link NamespaceNotFoundException} (client fault)
  *  <p>The specified namespace wasn't found.</p>

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateServicePrimaryTaskSetCommand.d.ts

@@ -31,7 +31,8 @@ declare const UpdateServicePrimaryTaskSetCommand_base: {
  * 			updated on the primary task set in a service will transition to the service. This is
  * 			used when a service uses the <code>EXTERNAL</code> deployment controller type. For more
  * 			information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-types.html">Amazon ECS Deployment
- * 				Types</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ * 				Types</a> in the <i>Amazon Elastic Container Service Developer
+ * 				Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -145,8 +146,8 @@ declare const UpdateServicePrimaryTaskSetCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API
  * 			request.</p>
- *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service
- * 				event messages</a>. </p>
+ *          <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS
+ * 				service event messages</a>. </p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>