@jjrawlins/cdk-ami-builder 0.0.191 → 0.0.192

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/ListServicesCommand.d.ts

@@ -61,6 +61,9 @@ declare const ListServicesCommand_base: {
  * @see {@link ListServicesCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/ListTagsForResourceCommand.d.ts

@@ -58,6 +58,9 @@ declare const ListTagsForResourceCommand_base: {
  * @see {@link ListTagsForResourceCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/ListTaskDefinitionFamiliesCommand.d.ts

@@ -59,6 +59,9 @@ declare const ListTaskDefinitionFamiliesCommand_base: {
  * @see {@link ListTaskDefinitionFamiliesCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/ListTaskDefinitionsCommand.d.ts

@@ -1,8 +1,7 @@
 import { Command as $Command } from "@smithy/smithy-client";
 import type { MetadataBearer as __MetadataBearer } from "@smithy/types";
 import type { ECSClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../ECSClient";
-import type { ListTaskDefinitionsRequest } from "../models/models_0";
-import type { ListTaskDefinitionsResponse } from "../models/models_1";
+import type { ListTaskDefinitionsRequest, ListTaskDefinitionsResponse } from "../models/models_1";
 /**
  * @public
  */
@@ -61,6 +60,9 @@ declare const ListTaskDefinitionsCommand_base: {
  * @see {@link ListTaskDefinitionsCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/ListTasksCommand.d.ts

@@ -65,6 +65,9 @@ declare const ListTasksCommand_base: {
  * @see {@link ListTasksCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/PutAccountSettingCommand.d.ts

@@ -60,6 +60,9 @@ declare const PutAccountSettingCommand_base: {
  * @see {@link PutAccountSettingCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/PutAccountSettingDefaultCommand.d.ts

@@ -59,6 +59,9 @@ declare const PutAccountSettingDefaultCommand_base: {
  * @see {@link PutAccountSettingDefaultCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/PutAttributesCommand.d.ts

@@ -68,15 +68,24 @@ declare const PutAttributesCommand_base: {
  * @see {@link PutAttributesCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link AttributeLimitExceededException} (client fault)
  *  <p>You can apply up to 10 custom attributes for each resource. You can view the attributes of a resource with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListAttributes.html">ListAttributes</a>. You can remove existing attributes on a resource with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DeleteAttributes.html">DeleteAttributes</a>.</p>
  *
+ * @throws {@link ClientException} (client fault)
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *
  * @throws {@link ClusterNotFoundException} (client fault)
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
+ * @throws {@link ServerException} (server fault)
+ *  <p>These errors are usually caused by a server issue.</p>
+ *
  * @throws {@link TargetNotFoundException} (client fault)
  *  <p>The specified target wasn't found. You can view your available container instances with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListContainerInstances.html">ListContainerInstances</a>. Amazon ECS container instances are cluster-specific and Region-specific.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/PutClusterCapacityProvidersCommand.d.ts

@@ -133,6 +133,9 @@ declare const PutClusterCapacityProvidersCommand_base: {
  * @see {@link PutClusterCapacityProvidersCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/RegisterContainerInstanceCommand.d.ts

@@ -172,9 +172,15 @@ declare const RegisterContainerInstanceCommand_base: {
  * @see {@link RegisterContainerInstanceCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
+ * @throws {@link ClusterNotFoundException} (client fault)
+ *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
+ *
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/RegisterTaskDefinitionCommand.d.ts

@@ -242,6 +242,12 @@ declare const RegisterTaskDefinitionCommand_base: {
  *           iam: "ENABLED" || "DISABLED",
  *         },
  *       },
+ *       s3filesVolumeConfiguration: { // S3FilesVolumeConfiguration
+ *         fileSystemArn: "STRING_VALUE", // required
+ *         rootDirectory: "STRING_VALUE",
+ *         transitEncryptionPort: Number("int"),
+ *         accessPointArn: "STRING_VALUE",
+ *       },
  *       fsxWindowsFileServerVolumeConfiguration: { // FSxWindowsFileServerVolumeConfiguration
  *         fileSystemId: "STRING_VALUE", // required
  *         rootDirectory: "STRING_VALUE", // required
@@ -508,6 +514,12 @@ declare const RegisterTaskDefinitionCommand_base: {
  * //             iam: "ENABLED" || "DISABLED",
  * //           },
  * //         },
+ * //         s3filesVolumeConfiguration: { // S3FilesVolumeConfiguration
+ * //           fileSystemArn: "STRING_VALUE", // required
+ * //           rootDirectory: "STRING_VALUE",
+ * //           transitEncryptionPort: Number("int"),
+ * //           accessPointArn: "STRING_VALUE",
+ * //         },
  * //         fsxWindowsFileServerVolumeConfiguration: { // FSxWindowsFileServerVolumeConfiguration
  * //           fileSystemId: "STRING_VALUE", // required
  * //           rootDirectory: "STRING_VALUE", // required
@@ -589,12 +601,18 @@ declare const RegisterTaskDefinitionCommand_base: {
  * @see {@link RegisterTaskDefinitionCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
+ * @throws {@link LimitExceededException} (client fault)
+ *  <p>The limit for the resource was exceeded.</p>
+ *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/StartTaskCommand.d.ts

@@ -322,6 +322,9 @@ declare const StartTaskCommand_base: {
  * @see {@link StartTaskCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
@@ -331,6 +334,9 @@ declare const StartTaskCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
+ * @throws {@link NamespaceNotFoundException} (client fault)
+ *  <p>The specified namespace wasn't found.</p>
+ *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/StopTaskCommand.d.ts

@@ -214,6 +214,9 @@ declare const StopTaskCommand_base: {
  * @see {@link StopTaskCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/SubmitAttachmentStateChangesCommand.d.ts

@@ -65,6 +65,9 @@ declare const SubmitAttachmentStateChangesCommand_base: {
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
+ * @throws {@link ClusterNotFoundException} (client fault)
+ *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
+ *
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/SubmitContainerStateChangeCommand.d.ts

@@ -75,6 +75,12 @@ declare const SubmitContainerStateChangeCommand_base: {
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
+ * @throws {@link ClusterNotFoundException} (client fault)
+ *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
+ *
+ * @throws {@link InvalidParameterException} (client fault)
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
+ *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/SubmitTaskStateChangeCommand.d.ts

@@ -99,6 +99,9 @@ declare const SubmitTaskStateChangeCommand_base: {
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
+ * @throws {@link ClusterNotFoundException} (client fault)
+ *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
+ *
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/TagResourceCommand.d.ts

@@ -57,6 +57,9 @@ declare const TagResourceCommand_base: {
  * @see {@link TagResourceCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
@@ -66,6 +69,9 @@ declare const TagResourceCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
+ * @throws {@link LimitExceededException} (client fault)
+ *  <p>The limit for the resource was exceeded.</p>
+ *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>The specified resource wasn't found.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UntagResourceCommand.d.ts

@@ -54,6 +54,9 @@ declare const UntagResourceCommand_base: {
  * @see {@link UntagResourceCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateCapacityProviderCommand.d.ts

@@ -291,6 +291,9 @@ declare const UpdateCapacityProviderCommand_base: {
  * @see {@link UpdateCapacityProviderCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateClusterCommand.d.ts

@@ -149,6 +149,9 @@ declare const UpdateClusterCommand_base: {
  * @see {@link UpdateClusterCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateClusterSettingsCommand.d.ts

@@ -129,6 +129,9 @@ declare const UpdateClusterSettingsCommand_base: {
  * @see {@link UpdateClusterSettingsCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *
@@ -141,6 +144,9 @@ declare const UpdateClusterSettingsCommand_base: {
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
  *
+ * @throws {@link UpdateInProgressException} (client fault)
+ *  <p>There's already a current Amazon ECS container agent update in progress on the container instance that's specified. If the container agent becomes disconnected while it's in a transitional stage, such as <code>PENDING</code> or <code>STAGING</code>, the update process can get stuck in that state. However, when the agent reconnects, it resumes where it stopped previously.</p>
+ *
  * @throws {@link ECSServiceException}
  * <p>Base exception class for all service exceptions from ECS service.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateContainerAgentCommand.d.ts

@@ -133,6 +133,9 @@ declare const UpdateContainerAgentCommand_base: {
  * @see {@link UpdateContainerAgentCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateContainerInstancesStateCommand.d.ts

@@ -145,6 +145,9 @@ declare const UpdateContainerInstancesStateCommand_base: {
  * @see {@link UpdateContainerInstancesStateCommandOutput} for command's `response` shape.
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You don't have authorization to perform the requested action.</p>
+ *
  * @throws {@link ClientException} (client fault)
  *  <p>These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/commands/UpdateTaskSetCommand.d.ts

@@ -143,6 +143,9 @@ declare const UpdateTaskSetCommand_base: {
  * @throws {@link InvalidParameterException} (client fault)
  *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p> <p>For more information about service event errors, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-event-messages-list.html">Amazon ECS service event messages</a>. </p>
  *
+ * @throws {@link LimitExceededException} (client fault)
+ *  <p>The limit for the resource was exceeded.</p>
+ *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>
  *

package/node_modules/@aws-sdk/client-ecs/dist-types/models/models_0.d.ts

@@ -4016,7 +4016,7 @@ export interface LinuxParameters {
      */
     sharedMemorySize?: number | undefined;
     /**
-     * <p>The container path, mount options, and size (in MiB) of the tmpfs mount. This parameter maps to the <code>--tmpfs</code> option to docker run.</p> <note> <p>If you're using tasks that use the Fargate launch type, the <code>tmpfs</code> parameter isn't supported.</p> </note>
+     * <p>The container path, mount options, and size (in MiB) of the tmpfs mount. This parameter maps to the <code>--tmpfs</code> option to docker run.</p>
      * @public
      */
     tmpfs?: Tmpfs[] | undefined;
@@ -4328,6 +4328,8 @@ export interface EphemeralStorage {
 }
 /**
  * <p>Details on an Elastic Inference accelerator. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-inference.html">Working with Amazon Elastic Inference on Amazon ECS</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *
+ * @deprecated (since 2023-04-15) This feature is no longer available.
  * @public
  */
 export interface InferenceAccelerator {
@@ -4511,12 +4513,38 @@ export interface FSxWindowsFileServerVolumeConfiguration {
     authorizationConfig: FSxWindowsFileServerAuthorizationConfig | undefined;
 }
 /**
- * <p>The data volume configuration for tasks launched using this task definition. Specifying a volume configuration in a task definition is optional. The volume configuration may contain multiple volumes but only one volume configured at launch is supported. Each volume defined in the volume configuration may only specify a <code>name</code> and one of either <code>configuredAtLaunch</code>, <code>dockerVolumeConfiguration</code>, <code>efsVolumeConfiguration</code>, <code>fsxWindowsFileServerVolumeConfiguration</code>, or <code>host</code>. If an empty volume configuration is specified, by default Amazon ECS uses a host volume. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_data_volumes.html">Using data volumes in tasks</a>.</p>
+ * <p>This parameter is specified when you're using an Amazon S3 Files file system for task storage. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/s3files-volumes.html">Amazon S3 Files volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p> <important> <p>Your task definition must include a Task IAM Role. See <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-files-prereq-policies.html#s3-files-prereq-iam-compute-role"> IAM role for attaching your file system to AWS compute resources</a> for required permissions.</p> </important>
+ * @public
+ */
+export interface S3FilesVolumeConfiguration {
+    /**
+     * <p>The full ARN of the S3 Files file system to mount.</p>
+     * @public
+     */
+    fileSystemArn: string | undefined;
+    /**
+     * <p>The directory within the Amazon S3 Files file system to mount as the root directory. If this parameter is omitted, the root of the Amazon S3 Files file system will be used. Specifying <code>/</code> will have the same effect as omitting this parameter.</p> <important> <p>If a S3 Files access point is specified in the <code>accessPointArn</code>, the root directory parameter must either be omitted or set to <code>/</code> which will enforce the path set on the S3 Files access point.</p> </important>
+     * @public
+     */
+    rootDirectory?: string | undefined;
+    /**
+     * <p>The port to use for sending encrypted data between the ECS host and the S3 Files file system. If you do not specify a transit encryption port, it will use the port selection strategy that the Amazon S3 Files mount helper uses. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-files-mounting.html">S3 Files mount helper</a>.</p>
+     * @public
+     */
+    transitEncryptionPort?: number | undefined;
+    /**
+     * <p>The full ARN of the S3 Files access point to use. If an access point is specified, the root directory value specified in the <code>S3FilesVolumeConfiguration</code> must either be omitted or set to <code>/</code> which will enforce the path set on the S3 Files access point. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-files-access-points-creating.html">Creating S3 Files access points</a>.</p>
+     * @public
+     */
+    accessPointArn?: string | undefined;
+}
+/**
+ * <p>The data volume configuration for tasks launched using this task definition. Specifying a volume configuration in a task definition is optional. The volume configuration may contain multiple volumes but only one volume configured at launch is supported. Each volume defined in the volume configuration may only specify a <code>name</code> and one of either <code>configuredAtLaunch</code>, <code>dockerVolumeConfiguration</code>, <code>efsVolumeConfiguration</code>, <code>s3filesVolumeConfiguration</code>, <code>fsxWindowsFileServerVolumeConfiguration</code>, or <code>host</code>. If an empty volume configuration is specified, by default Amazon ECS uses a host volume. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/using_data_volumes.html">Using data volumes in tasks</a>.</p>
  * @public
  */
 export interface Volume {
     /**
-     * <p>The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed.</p> <p>When using a volume configured at launch, the <code>name</code> is required and must also be specified as the volume name in the <code>ServiceVolumeConfiguration</code> or <code>TaskVolumeConfiguration</code> parameter when creating your service or standalone task.</p> <p>For all other types of volumes, this name is referenced in the <code>sourceVolume</code> parameter of the <code>mountPoints</code> object in the container definition.</p> <p>When a volume is using the <code>efsVolumeConfiguration</code>, the name is required.</p>
+     * <p>The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, underscores, and hyphens are allowed.</p> <p>When using a volume configured at launch, the <code>name</code> is required and must also be specified as the volume name in the <code>ServiceVolumeConfiguration</code> or <code>TaskVolumeConfiguration</code> parameter when creating your service or standalone task.</p> <p>For all other types of volumes, this name is referenced in the <code>sourceVolume</code> parameter of the <code>mountPoints</code> object in the container definition.</p> <p>When a volume is using the <code>efsVolumeConfiguration</code>, the name is required.</p> <p>When a volume is using the <code>s3filesVolumeConfiguration</code>, the name is required.</p>
      * @public
      */
     name?: string | undefined;
@@ -4535,6 +4563,11 @@ export interface Volume {
      * @public
      */
     efsVolumeConfiguration?: EFSVolumeConfiguration | undefined;
+    /**
+     * <p>This parameter is specified when you use an Amazon S3 Files file system for task storage.</p>
+     * @public
+     */
+    s3filesVolumeConfiguration?: S3FilesVolumeConfiguration | undefined;
     /**
      * <p>This parameter is specified when you use Amazon FSx for Windows File Server file system for task storage.</p>
      * @public
@@ -4633,6 +4666,8 @@ export interface TaskDefinition {
     memory?: string | undefined;
     /**
      * <p>The Elastic Inference accelerator that's associated with the task.</p>
+     *
+     * @deprecated (since 2023-04-15) This feature is no longer available.
      * @public
      */
     inferenceAccelerators?: InferenceAccelerator[] | undefined;
@@ -7952,34 +7987,3 @@ export interface DeleteTaskDefinitionsResponse {
      */
     failures?: Failure[] | undefined;
 }
-/**
- *
- * @public
- */
-export interface ListTaskDefinitionsRequest {
-    /**
-     * <p>The full family name to filter the <code>ListTaskDefinitions</code> results with. Specifying a <code>familyPrefix</code> limits the listed task definitions to task definition revisions that belong to that family.</p>
-     * @public
-     */
-    familyPrefix?: string | undefined;
-    /**
-     * <p>The task definition status to filter the <code>ListTaskDefinitions</code> results with. By default, only <code>ACTIVE</code> task definitions are listed. By setting this parameter to <code>INACTIVE</code>, you can view task definitions that are <code>INACTIVE</code> as long as an active task or service still references them. If you paginate the resulting output, be sure to keep the <code>status</code> value constant in each subsequent request.</p>
-     * @public
-     */
-    status?: TaskDefinitionStatus | undefined;
-    /**
-     * <p>The order to sort the results in. Valid values are <code>ASC</code> and <code>DESC</code>. By default, (<code>ASC</code>) task definitions are listed lexicographically by family name and in ascending numerical order by revision so that the newest task definitions in a family are listed last. Setting this parameter to <code>DESC</code> reverses the sort order on family name and revision. This is so that the newest task definitions in a family are listed first.</p>
-     * @public
-     */
-    sort?: SortOrder | undefined;
-    /**
-     * <p>The <code>nextToken</code> value returned from a <code>ListTaskDefinitions</code> request indicating that more results are available to fulfill the request and further calls will be needed. If <code>maxResults</code> was provided, it is possible the number of results to be fewer than <code>maxResults</code>.</p> <note> <p>This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.</p> </note>
-     * @public
-     */
-    nextToken?: string | undefined;
-    /**
-     * <p>The maximum number of task definition results that <code>ListTaskDefinitions</code> returned in paginated output. When this parameter is used, <code>ListTaskDefinitions</code> only returns <code>maxResults</code> results in a single page along with a <code>nextToken</code> response element. The remaining results of the initial request can be seen by sending another <code>ListTaskDefinitions</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If this parameter isn't used, then <code>ListTaskDefinitions</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
-     * @public
-     */
-    maxResults?: number | undefined;
-}

package/node_modules/@aws-sdk/client-ecs/dist-types/models/models_1.d.ts

@@ -1,5 +1,36 @@
-import type { Compatibility, Connectivity, HealthStatus, IpcMode, LaunchType, ManagedAgentName, NetworkMode, PidMode, PropagateTags, TaskField, TaskFilesystemType, TaskSetField, TaskStopCode } from "./enums";
+import type { Compatibility, Connectivity, HealthStatus, IpcMode, LaunchType, ManagedAgentName, NetworkMode, PidMode, PropagateTags, SortOrder, TaskDefinitionStatus, TaskField, TaskFilesystemType, TaskSetField, TaskStopCode } from "./enums";
 import type { Attachment, Attribute, CapacityProviderStrategyItem, ContainerDefinition, EBSTagSpecification, EnvironmentFile, EphemeralStorage, Failure, InferenceAccelerator, KeyValuePair, LoadBalancer, NetworkBinding, NetworkConfiguration, PlacementConstraint, PlacementStrategy, ProxyConfiguration, ResourceRequirement, RuntimePlatform, Scale, ServiceRegistry, Tag, TaskDefinition, TaskDefinitionPlacementConstraint, TaskSet, Volume } from "./models_0";
+/**
+ *
+ * @public
+ */
+export interface ListTaskDefinitionsRequest {
+    /**
+     * <p>The full family name to filter the <code>ListTaskDefinitions</code> results with. Specifying a <code>familyPrefix</code> limits the listed task definitions to task definition revisions that belong to that family.</p>
+     * @public
+     */
+    familyPrefix?: string | undefined;
+    /**
+     * <p>The task definition status to filter the <code>ListTaskDefinitions</code> results with. By default, only <code>ACTIVE</code> task definitions are listed. By setting this parameter to <code>INACTIVE</code>, you can view task definitions that are <code>INACTIVE</code> as long as an active task or service still references them. If you paginate the resulting output, be sure to keep the <code>status</code> value constant in each subsequent request.</p>
+     * @public
+     */
+    status?: TaskDefinitionStatus | undefined;
+    /**
+     * <p>The order to sort the results in. Valid values are <code>ASC</code> and <code>DESC</code>. By default, (<code>ASC</code>) task definitions are listed lexicographically by family name and in ascending numerical order by revision so that the newest task definitions in a family are listed last. Setting this parameter to <code>DESC</code> reverses the sort order on family name and revision. This is so that the newest task definitions in a family are listed first.</p>
+     * @public
+     */
+    sort?: SortOrder | undefined;
+    /**
+     * <p>The <code>nextToken</code> value returned from a <code>ListTaskDefinitions</code> request indicating that more results are available to fulfill the request and further calls will be needed. If <code>maxResults</code> was provided, it is possible the number of results to be fewer than <code>maxResults</code>.</p> <note> <p>This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.</p> </note>
+     * @public
+     */
+    nextToken?: string | undefined;
+    /**
+     * <p>The maximum number of task definition results that <code>ListTaskDefinitions</code> returned in paginated output. When this parameter is used, <code>ListTaskDefinitions</code> only returns <code>maxResults</code> results in a single page along with a <code>nextToken</code> response element. The remaining results of the initial request can be seen by sending another <code>ListTaskDefinitions</code> request with the returned <code>nextToken</code> value. This value can be between 1 and 100. If this parameter isn't used, then <code>ListTaskDefinitions</code> returns up to 100 results and a <code>nextToken</code> value if applicable.</p>
+     * @public
+     */
+    maxResults?: number | undefined;
+}
 /**
  *
  * @public
@@ -93,6 +124,8 @@ export interface RegisterTaskDefinitionRequest {
     proxyConfiguration?: ProxyConfiguration | undefined;
     /**
      * <p>The Elastic Inference accelerators to use for the containers in the task.</p>
+     *
+     * @deprecated (since 2023-04-15) This feature is no longer available.
      * @public
      */
     inferenceAccelerators?: InferenceAccelerator[] | undefined;
@@ -351,6 +384,8 @@ export interface ContainerOverride {
 }
 /**
  * <p>Details on an Elastic Inference accelerator task override. This parameter is used to override the Elastic Inference accelerator specified in the task definition. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-inference.html">Working with Amazon Elastic Inference on Amazon ECS</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *
+ * @deprecated (since 2023-04-15) This feature is no longer available.
  * @public
  */
 export interface InferenceAcceleratorOverride {
@@ -382,6 +417,8 @@ export interface TaskOverride {
     cpu?: string | undefined;
     /**
      * <p>The Elastic Inference accelerator override for the task.</p>
+     *
+     * @deprecated (since 2023-04-15) This feature is no longer available.
      * @public
      */
     inferenceAcceleratorOverrides?: InferenceAcceleratorOverride[] | undefined;
@@ -493,6 +530,8 @@ export interface Task {
     healthStatus?: HealthStatus | undefined;
     /**
      * <p>The Elastic Inference accelerator that's associated with the task.</p>
+     *
+     * @deprecated (since 2023-04-15) This feature is no longer available.
      * @public
      */
     inferenceAccelerators?: InferenceAccelerator[] | undefined;

package/node_modules/@aws-sdk/client-ecs/dist-types/schemas/schemas_0.d.ts

@@ -287,6 +287,7 @@ export declare var Rollback$: StaticStructureSchema;
 export declare var RunTaskRequest$: StaticStructureSchema;
 export declare var RunTaskResponse$: StaticStructureSchema;
 export declare var RuntimePlatform$: StaticStructureSchema;
+export declare var S3FilesVolumeConfiguration$: StaticStructureSchema;
 export declare var Scale$: StaticStructureSchema;
 export declare var Secret$: StaticStructureSchema;
 export declare var Service$: StaticStructureSchema;

package/node_modules/@aws-sdk/client-ecs/dist-types/ts3.4/commands/ListTaskDefinitionsCommand.d.ts

@@ -5,8 +5,10 @@ import {
   ServiceInputTypes,
   ServiceOutputTypes,
 } from "../ECSClient";
-import { ListTaskDefinitionsRequest } from "../models/models_0";
-import { ListTaskDefinitionsResponse } from "../models/models_1";
+import {
+  ListTaskDefinitionsRequest,
+  ListTaskDefinitionsResponse,
+} from "../models/models_1";
 export { __MetadataBearer };
 export { $Command };
 export interface ListTaskDefinitionsCommandInput