@jigging/jig 0.1.0-alpha.24 → 0.1.0-alpha.26

package/README.md

@@ -9,10 +9,14 @@ combine specialists, inspect their results, and stop owned work.
 npm install --global @jigging/jig@alpha
 ```
 
-The developer alpha requires Linux x86_64/glibc, Bubblewrap, and a systemd user
-manager with delegated cgroup v2 controllers. See the
+The developer alpha supports qualified Linux x86_64 and selected native Intel
+and Apple Silicon Macs. Linux needs Bubblewrap and a systemd user manager with
+delegated cgroup v2 controllers. Mac needs no administrator setup or `sudo`;
+its supervised resource limits can briefly overshoot. See the
 [complete supported-host requirements](https://jig.md/guide/#supported-host).
 npm installs Jig's exact Bun runtime dependency alongside the package.
+Linux ARM64 is unsupported. npm's independent OS and CPU allowlists may permit
+installation there, but the launcher refuses execution before selecting a runtime.
 
 ## Get started
 

package/THIRD_PARTY_NOTICES

@@ -18,14 +18,16 @@ not bundled in the archive.
 EXTERNAL RUNTIME DEPENDENCY — NOT INCLUDED
 ------------------------------------------
 
-`@jigging/jig` declares an exact dependency on
-`@oven/bun-linux-x64-baseline@1.3.3`. Package managers obtain that package
-separately; its bytes are not included or bundled in the Jig archive.
+`@jigging/jig` declares exact, platform-selected optional dependencies on
+`@oven/bun-linux-x64-baseline@1.3.3` and
+`@oven/bun-darwin-x64-baseline@1.4.2`. Package managers obtain the matching
+package separately; its bytes are not included or bundled in the Jig archive.
 
 Bun and the third-party components contained in Bun are governed by their
 respective terms:
 
 https://github.com/oven-sh/bun/blob/bun-v1.3.3/LICENSE.md
+https://github.com/oven-sh/bun/blob/bun-v1.4.2/LICENSE.md
 
 yaml 2.9.0
 ----------
@@ -88,7 +90,8 @@ adapter exit. It also registers pending turns before asynchronous prompt setup
 so immediate cancellation waits for and interrupts the correct native turn.
 The adapter waits for the matching native turn-start notification before
 exposing the turn as interruptible; a start reply alone does not establish it.
-See `packages/jig/patches/codex-acp@1.8.0.patch` and its companion
+It also accepts Jig’s one-use in-memory ChatGPT token bootstrap so subscription
+credentials need no sandbox-readable file. See `packages/jig/patches/codex-acp@1.8.0.patch` and its companion
 note for the correction and removal condition.
 
 Copyright 2025 JetBrains s.r.o.
@@ -120,6 +123,7 @@ runtime-support files.
 
 Jig carries a version-pinned dependency patch preserving failed RPC prompts,
 assistant errors, cancellation, and token limits as distinct ACP results.
+It also invokes Jig's private launcher with the verified Bun interpreter.
 The patch is maintained at `packages/jig/patches/pi-acp@0.0.33.patch` in source;
 the installed bundle includes that correction.
 
@@ -289,11 +293,14 @@ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
 TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
 SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 
-Unicode 15.1.0 CaseFolding data
+Unicode 15.1.0 case folding and normalization data
 --------------------------------
 
 `src/package/case-fold-15.1.ts` is generated from the C and F mappings in
-Unicode 15.1.0 `CaseFolding.txt`. Unicode data files are licensed under the
+Unicode 15.1.0 `CaseFolding.txt`. `src/package/normalization-data-15.1.ts`
+is generated from `UnicodeData.txt` and `DerivedNormalizationProps.txt`;
+the normalization test fixture retains vectors from `NormalizationTest.txt`.
+Unicode data files are licensed under the
 Unicode License v3 unless a file identifies different terms.
 
 UNICODE LICENSE V3

package/bin/jig

@@ -8,28 +8,63 @@ fail() {
   else
     printf '%s\n' 'Error: Jig could not start' >&2
   fi
-  printf '%s\n' '' '  The installed Jig runtime is unavailable.' '' \
-    '  Next step: Restore the complete Jig installation.' \
-    '  See https://jig.md/guide/#install.' '' \
+  printf '%s\n' '' "  ${1:-The installed Jig runtime is unavailable.}" '' \
+    "  Next step: ${2:-Restore the complete Jig installation.}" \
+    "  See ${3:-https://jig.md/guide/#install.}" '' \
     '  Diagnostic code: JIG_COMMAND_UNAVAILABLE' >&2
   exit 2
 }
 
+unsupported_host() {
+  fail 'This operating system and CPU combination is not supported.' \
+    'Use qualified Linux x86_64 or an Intel or Apple Silicon Mac.' \
+    'https://jig.md/guide/#supported-host.'
+}
+
 case $0 in
   *'
 '*) fail ;;
 esac
 
 if [ -x /usr/bin/readlink ]; then
-  readlink=/usr/bin/readlink
+  readlink_command=/usr/bin/readlink
 elif [ -x /bin/readlink ]; then
-  readlink=/bin/readlink
+  readlink_command=/bin/readlink
 elif [ -x /run/current-system/sw/bin/readlink ]; then
-  readlink=/run/current-system/sw/bin/readlink
+  readlink_command=/run/current-system/sw/bin/readlink
+else
+  fail
+fi
+
+if [ -x /usr/bin/uname ]; then
+  uname_command=/usr/bin/uname
+elif [ -x /bin/uname ]; then
+  uname_command=/bin/uname
 else
   fail
 fi
-launcher=$($readlink -f -- "$0") || fail
+
+resolve_file() {
+  resolved=$1
+  links=0
+  while [ -L "$resolved" ]; do
+    links=$((links + 1))
+    [ "$links" -le 16 ] || return 1
+    target=$($readlink_command "$resolved") || return 1
+    case $target in
+      /*) resolved=$target ;;
+      *) resolved=${resolved%/*}/$target ;;
+    esac
+  done
+  resolved_directory=$(CDPATH= cd -- "${resolved%/*}" && pwd -P) || return 1
+  printf '%s/%s\n' "$resolved_directory" "${resolved##*/}"
+}
+
+case $0 in
+  /*) launcher=$0 ;;
+  *) launcher=$PWD/$0 ;;
+esac
+launcher=$(resolve_file "$launcher") || fail
 [ "${launcher##*/}" = jig ] || fail
 bin=${launcher%/*}
 [ "${bin##*/}" = bin ] || fail
@@ -37,8 +72,22 @@ release=${bin%/*}
 entry=$release/libexec/installed-cli.js
 [ -f "$entry" ] || fail
 
-nested=$release/node_modules/@oven/bun-linux-x64-baseline/bin/bun
-hoisted=$release/../../@oven/bun-linux-x64-baseline/bin/bun
+case $($uname_command -s 2>/dev/null) in
+  Darwin)
+    case $($uname_command -m 2>/dev/null) in
+      x86_64) runtime_package=bun-darwin-x64-baseline ;;
+      arm64) runtime_package=bun-darwin-aarch64 ;;
+      *) unsupported_host ;;
+    esac ;;
+  Linux)
+    case $($uname_command -m 2>/dev/null) in
+      x86_64) runtime_package=bun-linux-x64-baseline ;;
+      *) unsupported_host ;;
+    esac ;;
+  *) unsupported_host ;;
+esac
+nested=$release/node_modules/@oven/$runtime_package/bin/bun
+hoisted=$release/../../@oven/$runtime_package/bin/bun
 if [ -f "$nested" ] && [ -x "$nested" ]; then
   runtime=$nested
 elif [ -f "$hoisted" ] && [ -x "$hoisted" ]; then
@@ -46,7 +95,7 @@ elif [ -f "$hoisted" ] && [ -x "$hoisted" ]; then
 else
   fail
 fi
-runtime=$($readlink -f -- "$runtime") || fail
+runtime=$(resolve_file "$runtime") || fail
 
 unset BUN_BE_BUN BUN_OPTIONS NODE_OPTIONS
 exec "$runtime" --no-env-file --no-install --config=/dev/null "$entry" "$@"