@jfk-solutions/demo3d-file-format 1.4.0 → 1.5.0

package/dist/three/index.js

@@ -151,6 +151,7 @@ function createState(three, project, options, buffers) {
             lines: 0,
             directVisuals: 0,
             proceduralBelts: 0,
+            proceduralRacks: 0,
             proceduralSupportStands: 0,
             proceduralConveyorSides: 0,
             proceduralPhotoEyes: 0,
@@ -380,9 +381,16 @@ function createDirectVisualObject(visual, state, parentVisual) {
     if (visual.typeName === "e3d:ImportedImageVisual") {
         return createImportedImageObject(visual, state);
     }
-    if (visual.typeName === "e3d:StraightBeltConveyor") {
+    if (visual.typeName === "e3d:StraightBeltConveyor" ||
+        visual.typeName === "e3d:CurveBeltConveyor" ||
+        visual.typeName === "e3d:InjectorBeltConveyor") {
         return state.options.renderProceduralBelts === true
-            ? createStraightBeltConveyorObject(visual, state)
+            ? createBeltConveyorObject(visual, state)
+            : undefined;
+    }
+    if (visual.typeName === "e3d:RackVisual") {
+        return state.options.renderProceduralRacks === true
+            ? createRackObject(visual, state)
             : undefined;
     }
     if (visual.typeName === "e3d:SupportStand") {
@@ -415,7 +423,16 @@ function createDirectVisualObject(visual, state, parentVisual) {
     state.stats.directVisuals += 1;
     return object;
 }
-function createStraightBeltConveyorObject(visual, state) {
+function createBeltConveyorObject(visual, state) {
+    if (visual.typeName === "e3d:CurveBeltConveyor") {
+        return createCurveBeltConveyorObject(visual, state);
+    }
+    if (visual.typeName === "e3d:InjectorBeltConveyor") {
+        const injector = createInjectorBeltConveyorObject(visual, state);
+        if (injector) {
+            return injector;
+        }
+    }
     const belt = readProceduralBelt(visual, state);
     if (!belt) {
         return undefined;
@@ -444,6 +461,146 @@ function createStraightBeltConveyorObject(visual, state) {
     state.stats.proceduralBelts += 1;
     return object;
 }
+const DEFAULT_BELT_WIDTH = 0.5;
+const DEFAULT_BELT_DIAMETER = 0.06;
+function appendOrientedTriangle(target, a, b, c, normal) {
+    const abx = b[0] - a[0];
+    const aby = b[1] - a[1];
+    const abz = b[2] - a[2];
+    const acx = c[0] - a[0];
+    const acy = c[1] - a[1];
+    const acz = c[2] - a[2];
+    const crossX = aby * acz - abz * acy;
+    const crossY = abz * acx - abx * acz;
+    const crossZ = abx * acy - aby * acx;
+    const forward = crossX * normal[0] + crossY * normal[1] + crossZ * normal[2] >= 0;
+    target.push(...a, ...(forward ? b : c), ...(forward ? c : b));
+}
+function appendOrientedQuad(target, a, b, c, d, normal) {
+    appendOrientedTriangle(target, a, b, c, normal);
+    appendOrientedTriangle(target, a, c, d, normal);
+}
+function createInjectorBeltConveyorObject(visual, state) {
+    const belt = readProceduralInjectorBelt(visual);
+    if (!belt) {
+        return undefined;
+    }
+    const geometry = getProceduralInjectorBeltGeometry(belt, state);
+    const object = new state.three.Mesh(geometry, [
+        getMaterial(belt.surfaceMaterial, state),
+        getMaterial(belt.sideMaterial, state)
+    ]);
+    object.name = visual.displayName ?? visual.id ?? visual.typeName;
+    object.userData.demo3d = {
+        kind: "procedural-belt",
+        id: visual.id,
+        name: visual.displayName,
+        typeName: visual.typeName,
+        xmlPath: visual.xml.path,
+        loopHeight: belt.thickness,
+        startEdge: belt.startEdge,
+        endEdge: belt.endEdge,
+        connectorShaped: true
+    };
+    state.stats.meshes += 1;
+    state.stats.directVisuals += 1;
+    state.stats.proceduralBelts += 1;
+    return object;
+}
+function readProceduralInjectorBelt(visual) {
+    const properties = visual.properties;
+    if (!properties || isFalse(properties.textOf("CenterVisible"))) {
+        return undefined;
+    }
+    const startEdge = conveyorConnectorEdge(visual, "Start");
+    const serializedEndEdge = conveyorConnectorEdge(visual, "End");
+    if (!startEdge || !serializedEndEdge) {
+        return undefined;
+    }
+    const sameDirection = pointDistanceSquared(startEdge[0], serializedEndEdge[0]) +
+        pointDistanceSquared(startEdge[1], serializedEndEdge[1]);
+    const reversedDirection = pointDistanceSquared(startEdge[0], serializedEndEdge[1]) +
+        pointDistanceSquared(startEdge[1], serializedEndEdge[0]);
+    const endEdge = sameDirection <= reversedDirection
+        ? serializedEndEdge
+        : [serializedEndEdge[1], serializedEndEdge[0]];
+    const beltDiameter = numberChildOptional(properties, "CenterDiameter") ??
+        numberChildOptional(properties, "BeltDiameter") ??
+        DEFAULT_BELT_DIAMETER;
+    const thickness = isTrue(properties.textOf("UseBeltCenterHeight"))
+        ? numberChild(properties, "BeltCenterHeight", beltDiameter)
+        : beltDiameter;
+    if (thickness <= 0) {
+        return undefined;
+    }
+    const surfaceMaterial = firstMaterial(properties.child("SurfaceMaterial") ?? properties);
+    const sideMaterial = firstMaterial(properties.child("SurfaceSideMaterial") ?? properties) ?? surfaceMaterial;
+    return { startEdge, endEdge, thickness, surfaceMaterial, sideMaterial };
+}
+function conveyorConnectorEdge(visual, name) {
+    const connector = visual.xml.child("CN")?.children.find((candidate) => candidate.xsiType === "e3d:ConveyorConnector" && candidate.textOf("Name") === name);
+    if (!connector) {
+        return undefined;
+    }
+    const start = pipePoint(connector.textOf("Start"));
+    const end = pipePoint(connector.textOf("End"));
+    return start && end ? [start, end] : undefined;
+}
+function pipePoint(value) {
+    const values = parsePipeNumbers(value);
+    if (values.length === 0) {
+        return undefined;
+    }
+    return [values[0] ?? 0, values[1] ?? 0, -(values[2] ?? 0)];
+}
+function pointDistanceSquared(left, right) {
+    return ((left[0] - right[0]) ** 2 +
+        (left[1] - right[1]) ** 2 +
+        (left[2] - right[2]) ** 2);
+}
+function getProceduralInjectorBeltGeometry(belt, state) {
+    const key = `injector-belt:${[...belt.startEdge, ...belt.endEdge].map((point) => point.join(",")).join(";")}:${belt.thickness}`;
+    const cached = state.primitiveGeometryCache.get(key);
+    if (cached) {
+        return cached;
+    }
+    const surfacePositions = [];
+    const sidePositions = [];
+    const top = [belt.startEdge[0], belt.startEdge[1], belt.endEdge[1], belt.endEdge[0]];
+    const bottom = top.map((point) => [point[0], point[1] - belt.thickness, point[2]]);
+    const center = [
+        top.reduce((sum, point) => sum + point[0], 0) / top.length,
+        top.reduce((sum, point) => sum + point[1], 0) / top.length,
+        top.reduce((sum, point) => sum + point[2], 0) / top.length
+    ];
+    appendOrientedQuad(surfacePositions, top[0], top[1], top[2], top[3], [0, 1, 0]);
+    appendOrientedQuad(surfacePositions, bottom[0], bottom[3], bottom[2], bottom[1], [0, -1, 0]);
+    appendInjectorBeltWall(surfacePositions, top[0], top[1], bottom[1], bottom[0], center);
+    appendInjectorBeltWall(sidePositions, top[1], top[2], bottom[2], bottom[1], center);
+    appendInjectorBeltWall(surfacePositions, top[2], top[3], bottom[3], bottom[2], center);
+    appendInjectorBeltWall(sidePositions, top[3], top[0], bottom[0], bottom[3], center);
+    const geometry = new state.three.BufferGeometry();
+    geometry.setAttribute("position", new state.three.Float32BufferAttribute([...surfacePositions, ...sidePositions], 3));
+    geometry.addGroup(0, surfacePositions.length / 3, 0);
+    geometry.addGroup(surfacePositions.length / 3, sidePositions.length / 3, 1);
+    geometry.computeVertexNormals();
+    geometry.computeBoundingBox();
+    geometry.computeBoundingSphere();
+    state.primitiveGeometryCache.set(key, geometry);
+    state.stats.geometries += 1;
+    return geometry;
+}
+function appendInjectorBeltWall(target, topA, topB, bottomB, bottomA, center) {
+    const middleX = (topA[0] + topB[0]) / 2;
+    const middleZ = (topA[2] + topB[2]) / 2;
+    let normalX = topB[2] - topA[2];
+    let normalZ = -(topB[0] - topA[0]);
+    if ((middleX - center[0]) * normalX + (middleZ - center[2]) * normalZ < 0) {
+        normalX = -normalX;
+        normalZ = -normalZ;
+    }
+    appendOrientedQuad(target, topA, topB, bottomB, bottomA, [normalX, 0, normalZ]);
+}
 function readProceduralBelt(visual, state) {
     const properties = visual.properties;
     if (!properties || isFalse(properties.textOf("CenterVisible"))) {
@@ -468,12 +625,12 @@ function readProceduralBelt(visual, state) {
     const beltLength = numberChildOptional(properties, "BeltLength") ??
         (serializedLength === undefined ? undefined : serializedLength - startPadding - endPadding);
     const serializedWidth = numberChildOptional(properties, "Width");
-    const beltWidth = numberChildOptional(properties, "BeltWidth") ?? serializedWidth;
+    const beltWidth = numberChildOptional(properties, "BeltWidth") ?? serializedWidth ?? DEFAULT_BELT_WIDTH;
     const effectiveLength = beltLength ?? 0;
-    const effectiveWidth = (beltWidth ?? 0) - leftPadding - rightPadding;
+    const effectiveWidth = beltWidth - leftPadding - rightPadding;
     const centerDiameter = numberChildOptional(properties, "CenterDiameter") ??
         numberChildOptional(properties, "BeltDiameter") ??
-        0;
+        DEFAULT_BELT_DIAMETER;
     const useBeltCenterHeight = isTrue(properties.textOf("UseBeltCenterHeight"));
     const loopHeight = useBeltCenterHeight
         ? numberChild(properties, "BeltCenterHeight", centerDiameter)
@@ -538,6 +695,131 @@ function getProceduralBeltGeometry(belt, state) {
     state.stats.geometries += 1;
     return geometry;
 }
+function createCurveBeltConveyorObject(visual, state) {
+    const belt = readProceduralCurveBelt(visual, state);
+    if (!belt) {
+        return undefined;
+    }
+    const geometry = getProceduralCurveBeltGeometry(belt, state);
+    const object = new state.three.Mesh(geometry, [
+        getMaterial(belt.surfaceMaterial, state),
+        getMaterial(belt.sideMaterial, state)
+    ]);
+    object.name = visual.displayName ?? visual.id ?? visual.typeName;
+    object.userData.demo3d = {
+        kind: "procedural-belt",
+        id: visual.id,
+        name: visual.displayName,
+        typeName: visual.typeName,
+        xmlPath: visual.xml.path,
+        innerRadius: belt.innerRadius,
+        width: belt.width,
+        loopHeight: belt.thickness,
+        angle: belt.angle
+    };
+    state.stats.meshes += 1;
+    state.stats.directVisuals += 1;
+    state.stats.proceduralBelts += 1;
+    return object;
+}
+function readProceduralCurveBelt(visual, state) {
+    const properties = visual.properties;
+    if (!properties || isFalse(properties.textOf("CenterVisible"))) {
+        return undefined;
+    }
+    const centerProfile = properties.child("CenterProfile");
+    if (centerProfile && (centerProfile.children.length > 0 || centerProfile.text.length > 0)) {
+        warn(state, {
+            code: "DEMO3D_THREE_UNSUPPORTED_BELT_PROFILE",
+            message: "Curve belt conveyors with a custom CenterProfile are not supported.",
+            sourceId: visual.id,
+            sourceType: visual.typeName,
+            xmlPath: visual.xml.path
+        });
+        return undefined;
+    }
+    const innerRadius = numberChild(properties, "InnerRadius", 0.5);
+    const width = numberChildOptional(properties, "BeltWidth")
+        ?? numberChildOptional(properties, "Width")
+        ?? DEFAULT_BELT_WIDTH;
+    const beltDiameter = numberChildOptional(properties, "CenterDiameter") ??
+        numberChildOptional(properties, "BeltDiameter") ??
+        DEFAULT_BELT_DIAMETER;
+    const thickness = isTrue(properties.textOf("UseBeltCenterHeight"))
+        ? numberChild(properties, "BeltCenterHeight", beltDiameter)
+        : beltDiameter;
+    const angle = degreesToRadians(numberChild(properties, "Angle", 90));
+    const stepAngle = Math.abs(degreesToRadians(numberChild(properties, "StepAngle", 15)));
+    if (innerRadius <= 0 || width <= 0 || thickness <= 0 || Math.abs(angle) <= 1e-6) {
+        warn(state, {
+            code: "DEMO3D_THREE_INVALID_BELT_DIMENSIONS",
+            message: `Curve belt conveyor dimensions must be positive and its angle non-zero (inner radius ${innerRadius}, width ${width}, height ${thickness}, angle ${numberChild(properties, "Angle", 90)}).`,
+            sourceId: visual.id,
+            sourceType: visual.typeName,
+            xmlPath: visual.xml.path
+        });
+        return undefined;
+    }
+    const surfaceMaterial = firstMaterial(properties.child("SurfaceMaterial") ?? properties);
+    const sideMaterial = firstMaterial(properties.child("SurfaceSideMaterial") ?? properties) ?? surfaceMaterial;
+    return {
+        innerRadius,
+        width,
+        thickness,
+        angle,
+        stepAngle: stepAngle > 1e-6 ? stepAngle : Math.PI / 12,
+        surfaceMaterial,
+        sideMaterial
+    };
+}
+function getProceduralCurveBeltGeometry(belt, state) {
+    const key = `curve-belt:${belt.innerRadius}:${belt.width}:${belt.thickness}:${belt.angle}:${belt.stepAngle}`;
+    const cached = state.primitiveGeometryCache.get(key);
+    if (cached) {
+        return cached;
+    }
+    const surfacePositions = [];
+    const sidePositions = [];
+    const outerRadius = belt.innerRadius + belt.width;
+    const segments = Math.max(4, Math.ceil(Math.abs(belt.angle) / belt.stepAngle));
+    const point = (radius, y, theta) => [
+        radius * Math.cos(theta),
+        y,
+        radius * Math.sin(theta)
+    ];
+    for (let segment = 0; segment < segments; segment += 1) {
+        const theta0 = belt.angle * (segment / segments);
+        const theta1 = belt.angle * ((segment + 1) / segments);
+        const middle = (theta0 + theta1) / 2;
+        const innerTop0 = point(belt.innerRadius, 0, theta0);
+        const innerTop1 = point(belt.innerRadius, 0, theta1);
+        const outerTop0 = point(outerRadius, 0, theta0);
+        const outerTop1 = point(outerRadius, 0, theta1);
+        const innerBottom0 = point(belt.innerRadius, -belt.thickness, theta0);
+        const innerBottom1 = point(belt.innerRadius, -belt.thickness, theta1);
+        const outerBottom0 = point(outerRadius, -belt.thickness, theta0);
+        const outerBottom1 = point(outerRadius, -belt.thickness, theta1);
+        appendOrientedQuad(surfacePositions, innerTop0, outerTop0, outerTop1, innerTop1, [0, 1, 0]);
+        appendOrientedQuad(surfacePositions, innerBottom0, innerBottom1, outerBottom1, outerBottom0, [0, -1, 0]);
+        appendOrientedQuad(sidePositions, outerBottom0, outerBottom1, outerTop1, outerTop0, [Math.cos(middle), 0, Math.sin(middle)]);
+        appendOrientedQuad(sidePositions, innerBottom0, innerTop0, innerTop1, innerBottom1, [-Math.cos(middle), 0, -Math.sin(middle)]);
+    }
+    const direction = Math.sign(belt.angle) || 1;
+    const start = 0;
+    const end = belt.angle;
+    appendOrientedQuad(surfacePositions, point(belt.innerRadius, -belt.thickness, start), point(outerRadius, -belt.thickness, start), point(outerRadius, 0, start), point(belt.innerRadius, 0, start), [direction * Math.sin(start), 0, -direction * Math.cos(start)]);
+    appendOrientedQuad(surfacePositions, point(belt.innerRadius, -belt.thickness, end), point(belt.innerRadius, 0, end), point(outerRadius, 0, end), point(outerRadius, -belt.thickness, end), [-direction * Math.sin(end), 0, direction * Math.cos(end)]);
+    const geometry = new state.three.BufferGeometry();
+    geometry.setAttribute("position", new state.three.Float32BufferAttribute([...surfacePositions, ...sidePositions], 3));
+    geometry.addGroup(0, surfacePositions.length / 3, 0);
+    geometry.addGroup(surfacePositions.length / 3, sidePositions.length / 3, 1);
+    geometry.computeVertexNormals();
+    geometry.computeBoundingBox();
+    geometry.computeBoundingSphere();
+    state.primitiveGeometryCache.set(key, geometry);
+    state.stats.geometries += 1;
+    return geometry;
+}
 function createRectangularBeltGeometry(belt, state) {
     const geometry = new state.three.BoxGeometry(belt.length, belt.thickness, belt.width);
     geometry.translate(belt.xOffset + belt.length / 2, -belt.thickness / 2, belt.zOffset);
@@ -582,6 +864,117 @@ function createRoundedBeltGeometry(belt, state) {
     }
     return geometry;
 }
+function createRackObject(visual, state) {
+    const properties = visual.properties;
+    if (!properties) {
+        return undefined;
+    }
+    const frameHeight = numberChild(properties, "FrameHeight", 0);
+    const uprightWidth = numberChild(properties, "UprightWidth", 0.05);
+    const uprightDepth = numberChild(properties, "UprightDepth", 0.05);
+    const frameDepth = numberChildOptional(properties, "FrameDepth") ?? numberChild(properties, "BayDepth", 0);
+    const strutWidth = numberChild(properties, "StrutWidth", 0.05);
+    if (frameHeight <= 0 || frameDepth <= 0 || uprightWidth <= 0 || uprightDepth <= 0 || strutWidth <= 0) {
+        warn(state, {
+            code: "DEMO3D_THREE_INVALID_RACK_DIMENSIONS",
+            message: `Rack dimensions must be positive (height ${frameHeight}, depth ${frameDepth}, upright ${uprightWidth} x ${uprightDepth}, strut ${strutWidth}).`,
+            sourceId: visual.id,
+            sourceType: visual.typeName,
+            xmlPath: visual.xml.path
+        });
+        return undefined;
+    }
+    const numBays = Math.max(1, Math.round(numberChild(properties, "NumBays", 1)));
+    const bayWidth = Math.max(0, numberChild(properties, "BayWidth", 0));
+    const framePitch = bayWidth + uprightWidth + Math.max(0, numberChild(properties, "MinFrameGap", 0));
+    const framePositions = [0];
+    if (!isFalse(properties.child("MiddleFrames")?.textOf("Visible"))) {
+        for (let bay = 1; bay < numBays; bay += 1) {
+            framePositions.push(bay * framePitch);
+        }
+    }
+    if (!isFalse(properties.child("LastFrame")?.textOf("Visible")) && framePitch > 0) {
+        framePositions.push(numBays * framePitch);
+    }
+    const initialStrutHeight = clamp(numberChild(properties, "InitialStrutHeight", strutWidth / 2), 0, frameHeight);
+    const strutSpanHeight = numberChild(properties, "StrutSpanHeight", frameHeight);
+    const strutHeights = [initialStrutHeight];
+    if (strutSpanHeight > 0) {
+        for (let height = initialStrutHeight + strutSpanHeight; height < frameHeight - 1e-6; height += strutSpanHeight) {
+            strutHeights.push(height);
+        }
+    }
+    const extensionHeight = clamp(frameHeight - Math.max(0, numberChild(properties, "ExtensionStrutOffset", strutWidth / 2)), 0, frameHeight);
+    if (!strutHeights.some((height) => Math.abs(height - extensionHeight) < 1e-6)) {
+        strutHeights.push(extensionHeight);
+    }
+    strutHeights.sort((left, right) => left - right);
+    const uprightMaterial = getColorMaterial(demo3dColorValue(properties.child("UprightColor"), 0xffd3d3d3 | 0), state);
+    const strutMaterial = getColorMaterial(demo3dColorValue(properties.child("StrutColor"), 0xffd3d3d3 | 0), state);
+    const uprightGeometry = cachedBoxGeometry(uprightWidth, frameHeight, uprightDepth, state);
+    const strutGeometry = cachedBoxGeometry(strutWidth, strutWidth, frameDepth, state);
+    const group = new state.three.Group();
+    group.name = `${visual.displayName ?? visual.id ?? "Rack"} generated geometry`;
+    for (const frameX of framePositions) {
+        for (const z of [-frameDepth / 2, frameDepth / 2]) {
+            const upright = new state.three.Mesh(uprightGeometry, uprightMaterial);
+            upright.name = "Rack upright";
+            upright.position.set(frameX, frameHeight / 2, z);
+            upright.userData.demo3d = { kind: "procedural-rack-upright", frameX };
+            group.add(upright);
+            state.stats.meshes += 1;
+        }
+        for (const height of strutHeights) {
+            const strut = new state.three.Mesh(strutGeometry, strutMaterial);
+            strut.name = "Rack strut";
+            strut.position.set(frameX, height, 0);
+            strut.userData.demo3d = { kind: "procedural-rack-strut", frameX, height };
+            group.add(strut);
+            state.stats.meshes += 1;
+        }
+    }
+    group.userData.demo3d = {
+        kind: "procedural-rack",
+        id: visual.id,
+        name: visual.displayName,
+        typeName: visual.typeName,
+        xmlPath: visual.xml.path,
+        frameHeight,
+        frameDepth,
+        framePositions,
+        strutHeights
+    };
+    state.stats.groups += 1;
+    state.stats.directVisuals += 1;
+    state.stats.proceduralRacks += 1;
+    return group;
+}
+function demo3dColorValue(container, fallback) {
+    const numeric = container?.text.trim();
+    if (numeric) {
+        const parsed = Number(numeric);
+        if (Number.isFinite(parsed)) {
+            return parsed;
+        }
+    }
+    switch (container?.textOf("name")?.trim().toLowerCase()) {
+        case "black":
+            return 0xff000000 | 0;
+        case "darkgray":
+        case "darkgrey":
+            return 0xffa9a9a9 | 0;
+        case "gray":
+        case "grey":
+            return 0xff808080 | 0;
+        case "lightgray":
+        case "lightgrey":
+            return 0xffd3d3d3 | 0;
+        case "white":
+            return 0xffffffff | 0;
+        default:
+            return fallback;
+    }
+}
 function createSupportStandObject(visual, parentVisual, state) {
     const stand = visual instanceof Demo3DSupportStand
         ? visual
@@ -591,7 +984,13 @@ function createSupportStandObject(visual, parentVisual, state) {
     const footProfile = properties?.footProfile;
     const floorPlateProfile = properties?.floorPlateProfile;
     const crossBraceProfile = properties?.crossBraceProfile;
-    if (!properties || !legProfile || !crossBraceProfile) {
+    if (!properties) {
+        return undefined;
+    }
+    if (!legProfile && !crossBraceProfile) {
+        return createDefaultSupportStandObject(visual, parentVisual, properties, state);
+    }
+    if (!legProfile || !crossBraceProfile) {
         warn(state, {
             code: "DEMO3D_THREE_UNSUPPORTED_SUPPORT_STAND_PROFILE",
             message: "Support stand is missing its leg or cross-brace extrusion profile.",
@@ -659,6 +1058,84 @@ function createSupportStandObject(visual, parentVisual, state) {
     state.stats.proceduralSupportStands += 1;
     return group;
 }
+const DEFAULT_CONVEYOR_HEIGHT = 0.83;
+const DEFAULT_SUPPORT_LEG_SIZE = 0.04;
+const DEFAULT_SUPPORT_FOOT_SIZE = 0.06;
+const DEFAULT_SUPPORT_FLOOR_PLATE_SIZE = 0.1;
+function createDefaultSupportStandObject(visual, parentVisual, properties, state) {
+    const parentWidth = numberChildOptional(parentVisual?.properties, "RollerWidth") ??
+        numberChildOptional(parentVisual?.properties, "BeltWidth") ??
+        numberChildOptional(parentVisual?.properties, "Width") ??
+        DEFAULT_BELT_WIDTH;
+    const conveyorOffset = properties.conveyorOffset;
+    const sideExtension = Math.abs(conveyorOffset[2] ?? 0);
+    const span = Math.max(parentWidth + sideExtension * 2, 0.1);
+    const top = conveyorOffset[1] ?? 0;
+    const x = conveyorOffset[0] ?? 0;
+    const floorY = numberChild(properties.xml, "FloorY", 0);
+    const explicitStandHeight = numberChildOptional(properties.xml, "StandHeight") ??
+        numberChildOptional(properties.xml, "SupportHeight") ??
+        numberChildOptional(properties.xml, "Height");
+    const explicitLegHeight = numberChildOptional(properties.xml, "LegHeight");
+    const conveyorHeight = numberChildOptional(parentVisual?.properties, "ConveyorHeight") ?? DEFAULT_CONVEYOR_HEIGHT;
+    const componentHeight = explicitLegHeight === undefined
+        ? undefined
+        : explicitLegHeight + properties.footHeight + properties.floorPlateHeight;
+    const supportHeight = Math.max(explicitStandHeight ?? componentHeight ?? conveyorHeight + top - floorY, properties.footHeight + properties.floorPlateHeight + 0.001);
+    const bottom = top - supportHeight;
+    const floorPlateHeight = clamp(properties.floorPlateHeight, 0, supportHeight);
+    const footHeight = clamp(properties.footHeight, 0, supportHeight - floorPlateHeight);
+    const legHeight = Math.max(supportHeight - floorPlateHeight - footHeight, 0.001);
+    const braces = [...properties.crossBraceHeights]
+        .filter((height) => height > 0 && height < supportHeight)
+        .sort((left, right) => left - right);
+    const group = new state.three.Group();
+    group.name = `${visual.displayName ?? visual.id ?? "Support stand"} default geometry`;
+    const legMaterial = supportComponentMaterial(visual.properties?.child("LegMaterial"), properties.legMaterial, state);
+    const footMaterial = supportComponentMaterial(visual.properties?.child("FootMaterial"), properties.footMaterial, state);
+    const floorPlateMaterial = supportComponentMaterial(visual.properties?.child("FloorPlateMaterial"), properties.floorPlateMaterial, state);
+    const braceMaterial = supportComponentMaterial(visual.properties?.child("CrossBraceMaterial"), properties.crossBraceMaterial, state);
+    for (const z of [-span / 2, span / 2]) {
+        addDefaultSupportBox(group, "leg", DEFAULT_SUPPORT_LEG_SIZE, legHeight, DEFAULT_SUPPORT_LEG_SIZE, [x, top - legHeight / 2, z], legMaterial, state);
+        if (footHeight > 0) {
+            addDefaultSupportBox(group, "foot", DEFAULT_SUPPORT_FOOT_SIZE, footHeight, DEFAULT_SUPPORT_FOOT_SIZE, [x, bottom + floorPlateHeight + footHeight / 2, z], footMaterial, state);
+        }
+        if (floorPlateHeight > 0) {
+            addDefaultSupportBox(group, "floor plate", DEFAULT_SUPPORT_FLOOR_PLATE_SIZE, floorPlateHeight, DEFAULT_SUPPORT_FLOOR_PLATE_SIZE, [x, bottom + floorPlateHeight / 2, z], floorPlateMaterial, state);
+        }
+    }
+    for (const height of braces) {
+        addDefaultSupportBox(group, "cross brace", DEFAULT_SUPPORT_LEG_SIZE, DEFAULT_SUPPORT_LEG_SIZE, span, [x, bottom + height, 0], braceMaterial, state);
+    }
+    addDefaultSupportBox(group, "top brace", DEFAULT_SUPPORT_LEG_SIZE, DEFAULT_SUPPORT_LEG_SIZE, span, [x, top - DEFAULT_SUPPORT_LEG_SIZE / 2, 0], braceMaterial, state);
+    group.userData.demo3d = {
+        kind: "procedural-support-stand",
+        id: visual.id,
+        name: visual.displayName,
+        typeName: visual.typeName,
+        xmlPath: visual.xml.path,
+        supportHeight,
+        span,
+        braceHeights: braces,
+        approximate: true,
+        defaultProfiles: true
+    };
+    state.stats.groups += 1;
+    state.stats.directVisuals += 1;
+    state.stats.proceduralSupportStands += 1;
+    return group;
+}
+function supportComponentMaterial(container, fallbackColor, state) {
+    return materialFromContainer(container, state) ?? getColorMaterial(fallbackColor, state);
+}
+function addDefaultSupportBox(group, component, width, height, depth, position, material, state) {
+    const mesh = new state.three.Mesh(cachedBoxGeometry(width, height, depth, state), material);
+    mesh.name = `Default support ${component}`;
+    mesh.position.set(position[0], position[1], position[2]);
+    mesh.userData.demo3d = { kind: "support-stand-component", component, approximate: true };
+    group.add(mesh);
+    state.stats.meshes += 1;
+}
 function addSupportProfileMeshes(group, profile, axis, length, position, fallbackColor, component, state) {
     profile.polygons.forEach((polygon, index) => {
         if (polygon.points.length < 3) {
@@ -937,6 +1414,25 @@ function addProceduralRollers(group, visual, state) {
     const material = materialFromContainer(properties.child("SurfaceMaterial") ?? properties, state)
         ?? getColorMaterial(numberChildOptional(properties, "RollerColor"), state);
     const geometry = cachedRollerGeometry(radius, width, state);
+    if (visual.typeName === "e3d:DiverterRollerConveyor") {
+        const length = numberChild(properties, "Length", 1);
+        const pitch = Math.max(numberChild(properties, "RollerPitch", diameter * 1.2), diameter);
+        const count = Math.max(1, Math.round(numberChildOptional(properties, "RollerCount") ?? length / pitch));
+        const across = Math.max(1, Math.round(numberChild(properties, "NumRollersAcrossWidth", 1)));
+        const totalWidth = numberChild(properties, "Width", width);
+        for (let index = 0; index < count; index += 1) {
+            for (let acrossIndex = 0; acrossIndex < across; acrossIndex += 1) {
+                const roller = new state.three.Mesh(geometry, material);
+                roller.name = `Generated divert roller ${index + 1}.${acrossIndex + 1}`;
+                roller.position.set(((index + 0.5) / count) * length, 0, ((acrossIndex + 0.5) / across - 0.5) * totalWidth);
+                roller.userData.demo3d = { kind: "procedural-roller", index, acrossIndex };
+                group.add(roller);
+                state.stats.meshes += 1;
+                state.stats.proceduralRollers += 1;
+            }
+        }
+        return;
+    }
     if (visual.typeName === "e3d:CurveRollerConveyor") {
         const count = Math.max(1, Math.round(numberChild(properties, "RollerCount", 1)));
         const innerRadius = numberChild(properties, "InnerRadius", 0.5);
@@ -1050,6 +1546,7 @@ function cachedBoxGeometry(width, height, depth, state) {
 function isRollerConveyorType(typeName) {
     return (typeName === "e3d:StraightRollerConveyor" ||
         typeName === "e3d:CurveRollerConveyor" ||
+        typeName === "e3d:DiverterRollerConveyor" ||
         typeName === "e3d:InjectorRollerConveyor");
 }
 function createImportedImageObject(visual, state) {