@itwin/rpcinterface-full-stack-tests 4.1.0-dev.4 → 4.1.0-dev.6

package/lib/dist/bundled-tests.js

@@ -75368,9 +75368,13 @@ class AccuSnap {
                 this.aSnapHits.removeCurrentHit();
                 hit = await this.getAccuSnapDetail(this.aSnapHits, out);
             }
+            if (!this._doSnapping)
+                hit = undefined; // Snap no longer requested...
         }
         else if (this.isLocateEnabled) {
             hit = await this.findLocatableHit(ev, false, out); // get next AccuSnap path (or undefined)
+            if (!this.isLocateEnabled)
+                hit = undefined; // Hit no longer requested...
         }
         // set the current hit
         if (hit || this.currHit)
@@ -75391,9 +75395,13 @@ class AccuSnap {
             if (this._doSnapping) {
                 out.snapStatus = this.findHits(ev);
                 hit = (_ElementLocateManager__WEBPACK_IMPORTED_MODULE_2__.SnapStatus.Success !== out.snapStatus) ? undefined : await this.getAccuSnapDetail(this.aSnapHits, out);
+                if (!this._doSnapping)
+                    hit = undefined; // Snap no longer requested...
             }
             else if (this.isLocateEnabled) {
                 hit = await this.findLocatableHit(ev, true, out);
+                if (!this.isLocateEnabled)
+                    hit = undefined; // Hit no longer requested...
             }
         }
         // set the current hit and display the sprite (based on snap's KeypointType)
@@ -180792,58 +180800,61 @@ __webpack_require__.r(__webpack_exports__);
 
 /**
  * Circular or elliptic arc.
- *
  * * The angle to point equation is:
- *
- * *  `X = center + cos(theta) * vector0 + sin(theta) * vector90`
+ * * `X = center + cos(theta) * vector0 + sin(theta) * vector90`
  * * When the two vectors are perpendicular and have equal length, it is a true circle.
  * * Non-perpendicular vectors are always elliptic.
- * *  vectors of unequal length are always elliptic.
+ * * Vectors of unequal length are always elliptic.
  * * To create an ellipse in the common "major and minor axis" form of an ellipse:
  * ** vector0 is the vector from the center to the major axis extreme.
  * ** vector90 is the vector from the center to the minor axis extreme.
- * ** note the constructing the vectors to the extreme points makes them perpendicular.
- * *  The method toScaledMatrix3d () can be called to convert the unrestricted vector0,vector90 to perpendicular form.
- * * The unrestricted form is much easier to work with for common calculations -- stroking, projection to 2d, intersection with plane.
+ * ** note that constructing the vectors to the extreme points makes them perpendicular.
+ * * The method toScaledMatrix3d() can be called to convert the unrestricted vector0,vector90 to perpendicular form.
+ * * The unrestricted form is much easier to work with for common calculations -- stroking, projection to 2d,
+ * intersection with plane.
  * @public
  */
 class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive {
-    /**
-     * Test if this and other are both instances of Arc3d.
-     */
-    isSameGeometryClass(other) { return other instanceof Arc3d; }
-    /**
-     * read property for (clone of) center
-     */
-    get center() { return this._center.clone(); }
-    /**
-     * read property for (clone of) vector0
-     */
-    get vector0() { return this._matrix.columnX(); }
-    /**
-     * read property for (clone of) vector90
-     */
-    get vector90() { return this._matrix.columnY(); }
-    /**
-     * read property for (clone of) plane normal, with arbitrary length.
-     */
-    get perpendicularVector() { return this._matrix.columnZ(); }
-    /**
-     * read property for (clone of!) matrix of vector0, vector90, unit normal
-     */
-    matrixClone() { return this._matrix.clone(); }
-    /**
-     * read property for (reference to !!) matrix of vector0, vector90, unit normal
-     */
-    get matrixRef() { return this._matrix; }
+    /** Test if this and other are both instances of Arc3d. */
+    isSameGeometryClass(other) {
+        return other instanceof Arc3d;
+    }
+    /** Read property for (clone of) center */
+    get center() {
+        return this._center.clone();
+    }
+    /** Read property for (clone of) vector0 */
+    get vector0() {
+        return this._matrix.columnX();
+    }
+    /** Read property for (clone of) vector90 */
+    get vector90() {
+        return this._matrix.columnY();
+    }
+    /** Read property for (clone of) plane normal, with arbitrary length. */
+    get perpendicularVector() {
+        return this._matrix.columnZ();
+    }
+    /** Read property for (clone of) matrix of vector0, vector90, unit normal */
+    matrixClone() {
+        return this._matrix.clone();
+    }
+    /** Read property for (reference to) matrix of vector0, vector90, unit normal */
+    get matrixRef() {
+        return this._matrix;
+    }
     /** Sweep of the angle. */
-    get sweep() { return this._sweep; }
-    set sweep(value) { this._sweep.setFrom(value); }
-    /**
-     * An Arc3d extends along its complete elliptic arc
-     */
-    get isExtensibleFractionSpace() { return true; }
-    // constructor copies the pointers !!!
+    get sweep() {
+        return this._sweep;
+    }
+    set sweep(value) {
+        this._sweep.setFrom(value);
+    }
+    /** An Arc3d extends along its complete elliptic arc */
+    get isExtensibleFractionSpace() {
+        return true;
+    }
+    // constructor copies the pointers
     constructor(center, matrix, sweep) {
         super();
         /** String name for schema properties */
@@ -180853,7 +180864,7 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         this._sweep = sweep;
     }
     /**
-     *  Return a clone of the arc, with transform applied
+     * Return a clone of the arc, with transform applied
      * @param transform
      */
     cloneTransformed(transform) {
@@ -180881,9 +180892,7 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
     set(center, matrix, sweep) {
         this.setRefs(center.clone(), matrix.clone(), sweep ? sweep.clone() : _geometry3d_AngleSweep__WEBPACK_IMPORTED_MODULE_1__.AngleSweep.create360());
     }
-    /**
-     * Copy center, matrix, and sweep from other Arc3d.
-     */
+    /** Copy center, matrix, and sweep from other Arc3d */
     setFrom(other) {
         this._center.setFrom(other._center);
         this._matrix.setFrom(other._matrix);
@@ -180941,11 +180950,12 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
      * @param result optional preallocated result
      */
     static create(center, vector0, vector90, sweep, result) {
-        const normal = vector0.unitCrossProductWithDefault(vector90, 0, 0, 0); // normal will be 000 for degenerate case ! !!
+        const normal = vector0.unitCrossProductWithDefault(vector90, 0, 0, 0); // normal will be 000 for degenerate case
         const matrix = _geometry3d_Matrix3d__WEBPACK_IMPORTED_MODULE_2__.Matrix3d.createColumns(vector0, vector90, normal);
         return Arc3d.createRefs(center !== undefined ? center.clone() : _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Point3d.create(0, 0, 0), matrix, sweep ? sweep.clone() : _geometry3d_AngleSweep__WEBPACK_IMPORTED_MODULE_1__.AngleSweep.create360(), result);
     }
-    /** Return a clone of this arc, projected to given z value.
+    /**
+     * Return a clone of this arc, projected to given z value.
      * * If `z` is omitted, the clone is at the z of the center.
      * * Note that projection to fixed z can change circle into ellipse (and (rarely) ellipse to circle)
      */
@@ -180955,7 +180965,8 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         return Arc3d.createXYZXYZXYZ(this._center.x, this._center.y, this._center.z, this._matrix.coffs[0], this._matrix.coffs[3], 0, this._matrix.coffs[1], this._matrix.coffs[4], 0, this._sweep);
     }
     /**
-     * Create an arc by center (cx,cy,xz) with vectors (ux,uy,uz) and (vx,vy,vz) to points at 0 and 90 degrees in parameter space.
+     * Create an arc by center (cx,cy,xz) with vectors (ux,uy,uz) and (vx,vy,vz) to points at 0 and 90 degrees in
+     * parameter space.
      * @param result optional preallocated result
      */
     static createXYZXYZXYZ(cx, cy, cz, ux, uy, uz, vx, vy, vz, sweep, result) {
@@ -180974,7 +180985,8 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         const largeAxis = _Geometry__WEBPACK_IMPORTED_MODULE_4__.Geometry.maxXY(magX, magY);
         return jacobian / (largeAxis * largeAxis);
     }
-    /** Create a circular arc defined by start point, any intermediate point, and end point.
+    /**
+     * Create a circular arc defined by start point, any intermediate point, and end point.
      * If the points are colinear, assemble them into a linestring.
      */
     static createCircularStartMiddleEnd(pointA, pointB, pointC, result) {
@@ -181037,7 +181049,8 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         result.direction.scaleInPlace(this._sweep.sweepRadians);
         return result;
     }
-    /** Construct a plane with
+    /**
+     * Construct a plane with
      * * origin at the fractional position along the arc
      * * x axis is the first derivative, i.e. tangent along the arc
      * * y axis is the second derivative, i.e. in the plane and on the center side of the tangent.
@@ -181115,12 +181128,16 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
      * Return the start point tof the arc.
      * @param result optional preallocated result
      */
-    startPoint(result) { return this.fractionToPoint(0.0, result); }
+    startPoint(result) {
+        return this.fractionToPoint(0.0, result);
+    }
     /**
      * Return the end point tof the arc.
      * @param result optional preallocated result
      */
-    endPoint(result) { return this.fractionToPoint(1.0, result); }
+    endPoint(result) {
+        return this.fractionToPoint(1.0, result);
+    }
     /** * If this is a circular arc, return the simple length derived from radius and sweep.
      * * Otherwise (i.e. if this elliptical) fall through to CurvePrimitive base implementation which
      *     Uses quadrature.
@@ -181128,7 +181145,8 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
     curveLength() {
         return this.curveLengthBetweenFractions(0, 1);
     }
-    /** * If this is a circular arc, return the simple length derived from radius and sweep.
+    /**
+     * * If this is a circular arc, return the simple length derived from radius and sweep.
      * * Otherwise (i.e. if this elliptical) fall through CurvePrimitive integrator.
      */
     curveLengthBetweenFractions(fraction0, fraction1) {
@@ -181156,9 +181174,9 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
     /**
      * Return an approximate (but easy to compute) arc length.
      * The estimate is:
-     * * Form 8 chords on full circle, proportionally fewer for partials.  (But 2 extras if less than half circle.)
-     * * sum the chord lengths
-     * * For a circle, we know this crude approximation has to be increased by a factor (theta/(2 sin (theta/2)))
+     * * Form 8 chords on full circle, proportionally fewer for partials (but 2 extras if less than half circle).
+     * * Sum the chord lengths.
+     * * For a circle, we know this crude approximation has to be increased by a factor (theta/(2*sin(theta/2))).
      * * Apply that factor.
      * * Experiments confirm that this is within 3 percent for a variety of eccentricities and arc sweeps.
      */
@@ -181223,7 +181241,8 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
     /**
      * Return details of the closest point on the arc, optionally extending to full ellipse.
      * @param spacePoint search for point closest to this point.
-     * @param extend if true, consider projections to the complete ellipse.   If false, consider only endpoints and projections within the arc sweep.
+     * @param extend if true, consider projections to the complete ellipse. If false, consider only endpoints and
+     * projections within the arc sweep.
      * @param result optional preallocated result.
      */
     closestPoint(spacePoint, extend, result) {
@@ -181265,8 +181284,11 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         return result;
     }
     /** Reverse the sweep  of the arc. */
-    reverseInPlace() { this._sweep.reverseInPlace(); }
-    /** apply a transform to the arc basis vectors.
+    reverseInPlace() {
+        this._sweep.reverseInPlace();
+    }
+    /**
+     * Apply a transform to the arc basis vectors.
      * * nonuniform (i.e. skewing) transforms are allowed.
      * * The transformed vector0 and vector90 are NOT squared up as major minor axes.  (This is a good feature!!)
      */
@@ -181288,18 +181310,14 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
             && _Geometry__WEBPACK_IMPORTED_MODULE_4__.Geometry.isSmallMetricDistance(this._matrix.dotColumnX(normal))
             && _Geometry__WEBPACK_IMPORTED_MODULE_4__.Geometry.isSmallMetricDistance(this._matrix.dotColumnY(normal));
     }
-    /**
-     * Return true if the vector0 and vector90 are of equal length and perpendicular.
-     */
+    /** Return true if the vector0 and vector90 are of equal length and perpendicular. */
     get isCircular() {
         const axx = this._matrix.columnXMagnitudeSquared();
         const ayy = this._matrix.columnYMagnitudeSquared();
         const axy = this._matrix.columnXDotColumnY();
         return _geometry3d_Angle__WEBPACK_IMPORTED_MODULE_6__.Angle.isPerpendicularDotSet(axx, ayy, axy) && _Geometry__WEBPACK_IMPORTED_MODULE_4__.Geometry.isSameCoordinateSquared(axx, ayy);
     }
-    /**
-     * Return true if the vector0 and vector90 are of equal length and perpendicular.
-     */
+    /** Return true if the vector0 and vector90 are of equal length and perpendicular. */
     circularRadiusXY() {
         const ux = this._matrix.at(0, 0);
         const uy = this._matrix.at(1, 0);
@@ -181316,9 +181334,11 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         return this.isCircular ? this._matrix.columnXMagnitude() : undefined;
     }
     /** Return the larger of the two defining vectors. */
-    maxVectorLength() { return Math.max(this._matrix.columnXMagnitude(), this._matrix.columnYMagnitude()); }
+    maxVectorLength() {
+        return Math.max(this._matrix.columnXMagnitude(), this._matrix.columnYMagnitude());
+    }
     /**
-     * compute intersections with a plane.
+     * Compute intersections with a plane.
      * @param plane plane to intersect
      * @param result array of locations on the curve.
      */
@@ -181382,9 +181402,9 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         range.extend(highPoint);
     }
     /**
-   * Returns a (high accuracy) range of the curve between fractional positions
-   * * Default implementation returns teh range of the curve from clonePartialCurve
-   */
+     * Returns a (high accuracy) range of the curve between fractional positions
+     * * Default implementation returns teh range of the curve from clonePartialCurve
+     */
     rangeBetweenFractions(fraction0, fraction1, transform) {
         const sweep = _geometry3d_AngleSweep__WEBPACK_IMPORTED_MODULE_1__.AngleSweep.createStartEndRadians(this.sweep.fractionToRadians(fraction0), this.sweep.fractionToRadians(fraction1));
         const range = _geometry3d_Range__WEBPACK_IMPORTED_MODULE_12__.Range3d.create();
@@ -181407,9 +181427,7 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         result.set(plane.altitude(this._center), plane.velocityXYZ(this._matrix.coffs[0], this._matrix.coffs[3], this._matrix.coffs[6]), plane.velocityXYZ(this._matrix.coffs[1], this._matrix.coffs[4], this._matrix.coffs[7]));
         return result;
     }
-    /**
-     * Create a new arc which is a unit circle centered at the origin.
-     */
+    /** Create a new arc which is a unit circle centered at the origin. */
     static createUnitCircle() {
         return Arc3d.createRefs(_geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Point3d.create(0, 0, 0), _geometry3d_Matrix3d__WEBPACK_IMPORTED_MODULE_2__.Matrix3d.createIdentity(), _geometry3d_AngleSweep__WEBPACK_IMPORTED_MODULE_1__.AngleSweep.create360());
     }
@@ -181440,8 +181458,7 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
     setVector0Vector90(vector0, vector90) {
         this._matrix.setColumns(vector0, vector90, vector0.unitCrossProductWithDefault(vector90, 0, 0, 0));
     }
-    /** Return the arc definition with rigid matrix form with axis radii.
-     */
+    /** Return the arc definition with rigid matrix form with axis radii */
     toScaledMatrix3d() {
         const angleData = _geometry3d_Angle__WEBPACK_IMPORTED_MODULE_6__.Angle.dotProductsToHalfAngleTrigValues(this._matrix.columnXMagnitudeSquared(), this._matrix.columnYMagnitudeSquared(), this._matrix.columnXDotColumnY(), true);
         const vector0A = this._matrix.multiplyXY(angleData.c, angleData.s);
@@ -181455,8 +181472,7 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
             sweep: this.sweep.cloneMinusRadians(angleData.radians),
         };
     }
-    /** Return the arc definition with center, two vectors, and angle sweep;
-     */
+    /** Return the arc definition with center, two vectors, and angle sweep; */
     toVectors() {
         return {
             center: this.center,
@@ -181465,8 +181481,7 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
             sweep: this.sweep,
         };
     }
-    /** Return the arc definition with center, two vectors, and angle sweep, optionally transformed.
-     */
+    /** Return the arc definition with center, two vectors, and angle sweep, optionally transformed. */
     toTransformedVectors(transform) {
         return transform ? {
             center: transform.multiplyPoint3d(this._center),
@@ -181481,8 +181496,7 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
                 sweep: this.sweep,
             };
     }
-    /** Return the arc definition with center, two vectors, and angle sweep, transformed to 4d points.
-     */
+    /** Return the arc definition with center, two vectors, and angle sweep, transformed to 4d points. */
     toTransformedPoint4d(matrix) {
         return {
             center: matrix.multiplyPoint3d(this._center, 1.0),
@@ -181526,9 +181540,7 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
             vector90: this._matrix.columnY().toJSON(),
         };
     }
-    /**
-     * Test if this arc is almost equal to another GeometryQuery object
-     */
+    /** Test if this arc is almost equal to another GeometryQuery object */
     isAlmostEqual(otherGeometry) {
         if (otherGeometry instanceof Arc3d) {
             const other = otherGeometry;
@@ -181551,7 +181563,7 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         handler.endCurvePrimitive(this);
     }
     /**
-     * return the stroke count required for given options.
+     * Return the stroke count required for given options.
      * @param options StrokeOptions that determine count
      */
     computeStrokeCountForOptions(options) {
@@ -181569,7 +181581,8 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
     dispatchToGeometryHandler(handler) {
         return handler.handleArc3d(this);
     }
-    /** Return (if possible) an arc which is a portion of this curve.
+    /**
+     * Return (if possible) an arc which is a portion of this curve.
      * @param fractionA [in] start fraction
      * @param fractionB [in] end fraction
      */
@@ -181583,8 +181596,10 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         arcB.sweep.setStartEndRadians(this.sweep.fractionToRadians(fractionA), this.sweep.fractionToRadians(fractionB));
         return arcB;
     }
-    /** Return an arc whose basis vectors are rotated by given angle within the current basis space.
-     * * the result arc will have its zero-degree point (new `vector0`) at the current `vector0 * cos(theta) + vector90 * sin(theta)`
+    /**
+     * Return an arc whose basis vectors are rotated by given angle within the current basis space.
+     * * the result arc will have its zero-degree point (new `vector0`) at the current
+     * `vector0 * cos(theta) + vector90 * sin(theta)`
      * * the result sweep is adjusted so all fractional coordinates (e.g. start and end) evaluate to the same xyz.
      *   * Specifically, theta is subtracted from the original start and end angles.
      * @param theta the angle (in the input arc space) which is to become the 0-degree point in the new arc.
@@ -181601,7 +181616,8 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
     /**
      * Find intervals of this CurvePrimitive that are interior to a clipper
      * @param clipper clip structure (e.g.clip planes)
-     * @param announce(optional) function to be called announcing fractional intervals"  ` announce(fraction0, fraction1, curvePrimitive)`
+     * @param announce(optional) function to be called announcing fractional intervals"
+     * ` announce(fraction0, fraction1, curvePrimitive)`
      * @returns true if any "in" segments are announced.
      */
     announceClipIntervals(clipper, announce) {
@@ -181622,8 +181638,10 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
      * * Return the arc along with the fractional positions of the tangency points.
      * * In the returned object:
      *   * `arc` is the (bounded) arc
-     *   * `fraction10` is the tangency point's position as an interpolating fraction of the line segment from `point1` (backwards) to `point0`
-     *   * `fraction12` is the tangency point's position as an interpolating fraction of the line segment from `point1` (forward) to `point2`
+     *   * `fraction10` is the tangency point's position as an interpolating fraction of the line segment from
+     * `point1` (backwards) to `point0`
+     *   * `fraction12` is the tangency point's position as an interpolating fraction of the line segment from
+     * `point1` (forward) to `point2`
      *   * `point` is the `point1` input.
      * * If unable to construct the arc:
      *   * `point` is the `point1` input.
@@ -181697,7 +181715,9 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
             const r0new = r0 - sign * options.leftOffsetDistance;
             const r90 = this.isCircular ? r0 : arcXY.matrixRef.columnYMagnitude();
             const r90new = this.isCircular ? r0new : r90 - sign * options.leftOffsetDistance;
-            if (!_Geometry__WEBPACK_IMPORTED_MODULE_4__.Geometry.isSmallMetricDistance(r0new) && (r0 * r0new > 0.0) && (this.isCircular || (!_Geometry__WEBPACK_IMPORTED_MODULE_4__.Geometry.isSmallMetricDistance(r90new) && (r90 * r90new > 0.0)))) {
+            if (!_Geometry__WEBPACK_IMPORTED_MODULE_4__.Geometry.isSmallMetricDistance(r0new)
+                && (r0 * r0new > 0.0)
+                && (this.isCircular || (!_Geometry__WEBPACK_IMPORTED_MODULE_4__.Geometry.isSmallMetricDistance(r90new) && (r90 * r90new > 0.0)))) {
                 const factor0 = r0new / r0;
                 const factor90 = this.isCircular ? factor0 : r90new / r90;
                 const matrix = arcXY.matrixClone();
@@ -181713,7 +181733,8 @@ class Arc3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive
         this.emitStrokableParts(handler, options.strokeOptions);
         return handler.claimResult();
     }
-    /** Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters of projection.
+    /**
+     * Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters of projection.
      * @param ray ray onto which the instance is projected. A `Vector3d` is treated as a `Ray3d` with zero origin.
      * @param lowHigh optional receiver for output
      * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is the end of the ray.
@@ -181727,9 +181748,9 @@ Arc3d._workPointB = _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Poi
 Arc3d._workPointC = _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Point3d.create();
 Arc3d._workVectorU = _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Vector3d.create();
 Arc3d._workVectorV = _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Vector3d.create();
-// !! misspelled Gauss in the published static !!!   Declare it ok.
+// !! misspelled Gauss in the published static !! Declare it ok.
 // cspell::word Guass
-/** Gauss point quadrature count for evaluating curve length.   (The number of intervals is adjusted to the arc sweep) */
+/** Gauss point quadrature count for evaluating curve length. (The number of intervals is adjusted to the arc sweep) */
 Arc3d.quadratureGuassCount = 5;
 /** In quadrature for arc length, use this interval (divided by quickEccentricity) */
 Arc3d.quadratureIntervalAngleDegrees = 10.0;
@@ -182925,7 +182946,8 @@ __webpack_require__.r(__webpack_exports__);
 
 /**
  * A `CurveCollection` is an abstract (non-instantiable) class for various sets of curves with particular structures:
- * - `CurveChain` is a (non-instantiable) intermediate class for a sequence of `CurvePrimitive ` joining head-to-tail.  The two instantiable forms of `CurveChain` are
+ * - `CurveChain` is a (non-instantiable) intermediate class for a sequence of `CurvePrimitive` joining head-to-tail.
+ * The two instantiable forms of `CurveChain` are
  *   - `Path` - A chain not required to close, and not enclosing a planar area
  *   - `Loop` - A chain required to close from last to first so that a planar area is enclosed.
  * - `ParityRegion` -- a collection of coplanar `Loop`s, with "in/out" classification by parity rules
@@ -182941,11 +182963,13 @@ class CurveCollection extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_0__.Geomet
         /** String name for schema properties */
         this.geometryCategory = "curveCollection";
         /* eslint-disable @typescript-eslint/naming-convention, no-empty */
-        /**  Flag for inner loop status. Only used by `Loop`. */
+        /** Flag for inner loop status. Only used by `Loop`. */
         this.isInner = false;
     }
     /** Return the sum of the lengths of all contained curves. */
-    sumLengths() { return _internalContexts_SumLengthsContext__WEBPACK_IMPORTED_MODULE_1__.SumLengthsContext.sumLengths(this); }
+    sumLengths() {
+        return _internalContexts_SumLengthsContext__WEBPACK_IMPORTED_MODULE_1__.SumLengthsContext.sumLengths(this);
+    }
     /** Return the closest point on the contained curves */
     closestPoint(spacePoint) {
         let detailA;
@@ -182963,17 +182987,24 @@ class CurveCollection extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_0__.Geomet
         }
         return detailA;
     }
-    /** return the max gap between adjacent primitives in Path and Loop collections.
-     *
+    /**
+     * Return the max gap between adjacent primitives in Path and Loop collections.
      * * In a Path, gaps are computed between consecutive primitives.
      * * In a Loop, gaps are computed between consecutive primitives and between last and first.
-     * * gaps are NOT computed between consecutive CurvePrimitives in "unstructured" collections.  The type is "unstructured" so gaps should not be semantically meaningful.
+     * * gaps are NOT computed between consecutive CurvePrimitives in "unstructured" collections.  The type is
+     * "unstructured" so gaps should not be semantically meaningful.
      */
-    maxGap() { return _internalContexts_GapSearchContext__WEBPACK_IMPORTED_MODULE_4__.GapSearchContext.maxGap(this); }
-    /** return true if the curve collection has any primitives other than LineSegment3d and LineString3d  */
-    checkForNonLinearPrimitives() { return _internalContexts_CountLinearPartsSearchContext__WEBPACK_IMPORTED_MODULE_5__.CountLinearPartsSearchContext.hasNonLinearPrimitives(this); }
+    maxGap() {
+        return _internalContexts_GapSearchContext__WEBPACK_IMPORTED_MODULE_4__.GapSearchContext.maxGap(this);
+    }
+    /** Return true if the curve collection has any primitives other than LineSegment3d and LineString3d  */
+    checkForNonLinearPrimitives() {
+        return _internalContexts_CountLinearPartsSearchContext__WEBPACK_IMPORTED_MODULE_5__.CountLinearPartsSearchContext.hasNonLinearPrimitives(this);
+    }
     /** Apply transform recursively to children */
-    tryTransformInPlace(transform) { return _internalContexts_TransformInPlaceContext__WEBPACK_IMPORTED_MODULE_6__.TransformInPlaceContext.tryTransformInPlace(this, transform); }
+    tryTransformInPlace(transform) {
+        return _internalContexts_TransformInPlaceContext__WEBPACK_IMPORTED_MODULE_6__.TransformInPlaceContext.tryTransformInPlace(this, transform);
+    }
     /** Return a deep copy. */
     clone() {
         return _internalContexts_CloneCurvesContext__WEBPACK_IMPORTED_MODULE_7__.CloneCurvesContext.clone(this);
@@ -182999,15 +183030,18 @@ class CurveCollection extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_0__.Geomet
     }
     /**
      * Return an array containing only the curve primitives.
-     * @param collectorArray optional array to receive primitives.   If present, new primitives are ADDED (without clearing the array.)
-     * @param smallestPossiblePrimitives if false, CurvePrimitiveWithDistanceIndex returns only itself.  If true, it recurses to its (otherwise hidden) children.
+     * @param collectorArray optional array to receive primitives. If present, new primitives are ADDED (without
+     * clearing the array.)
+     * @param smallestPossiblePrimitives if false, CurvePrimitiveWithDistanceIndex returns only itself.  If true,
+     * it recurses to its (otherwise hidden) children.
      */
     collectCurvePrimitives(collectorArray, smallestPossiblePrimitives = false, explodeLineStrings = false) {
         const results = collectorArray === undefined ? [] : collectorArray;
         this.collectCurvePrimitivesGo(results, smallestPossiblePrimitives, explodeLineStrings);
         return results;
     }
-    /** Return true for planar region types:
+    /**
+     * Return true for planar region types:
      * * `Loop`
      * * `ParityRegion`
      * * `UnionRegion`
@@ -183015,12 +183049,12 @@ class CurveCollection extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_0__.Geomet
     get isAnyRegionType() {
         return this.dgnBoundaryType() === 2 || this.dgnBoundaryType() === 5 || this.dgnBoundaryType() === 4;
     }
-    /** Return true for a `Path`, i.e. a chain of curves joined head-to-tail
-     */
+    /** Return true for a `Path`, i.e. a chain of curves joined head-to-tail */
     get isOpenPath() {
         return this.dgnBoundaryType() === 1;
     }
-    /** Return true for a single-loop planar region type, i.e. `Loop`.
+    /**
+     * Return true for a single-loop planar region type, i.e. `Loop`.
      * * This is _not- a test for physical closure of a `Path`
      */
     get isClosedPath() {
@@ -183055,19 +183089,25 @@ class CurveCollection extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_0__.Geomet
             }
         return undefined;
     }
-    /** Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters of projection.
+    /**
+     * Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters
+     * of projection.
      * @param ray ray onto which the instance is projected. A `Vector3d` is treated as a `Ray3d` with zero origin.
      * @param lowHigh optional receiver for output
-     * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is the end of the ray.
+     * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is the
+     * end of the ray.
      */
     projectedParameterRange(ray, lowHigh) {
         return _internalContexts_PlaneAltitudeRangeContext__WEBPACK_IMPORTED_MODULE_9__.PlaneAltitudeRangeContext.findExtremeFractionsAlongDirection(this, ray, lowHigh);
     }
 }
-/** Shared base class for use by both open and closed paths.
+/**
+ * Shared base class for use by both open and closed paths.
  * - A `CurveChain` contains only curvePrimitives.  No other paths, loops, or regions allowed.
- * - A single entry in the chain can in fact contain multiple curve primitives if the entry itself is (for instance) `CurveChainWithDistanceIndex`
- *   which presents itself (through method interface) as a CurvePrimitive with well defined mappings from fraction to xyz, but in fact does all the
+ * - A single entry in the chain can in fact contain multiple curve primitives if the entry itself is (for instance)
+ * `CurveChainWithDistanceIndex`
+ *   which presents itself (through method interface) as a CurvePrimitive with well defined mappings from fraction
+ * to xyz, but in fact does all the
  *   calculations over multiple primitives.
  * - The specific derived classes are `Path` and `Loop`
  * - `CurveChain` is an intermediate class.   It is not instantiable on its own.
@@ -183100,7 +183140,8 @@ class CurveChain extends CurveCollection {
         }
         return undefined;
     }
-    /** Stroke the chain into a simple xyz array.
+    /**
+     * Stroke the chain into a simple xyz array.
      * @param options tolerance parameters controlling the stroking.
      */
     getPackedStrokes(options) {
@@ -183125,7 +183166,8 @@ class CurveChain extends CurveCollection {
       return strokes;
     }
     */
-    /** add a child curve.
+    /**
+     * Add a child curve.
      * * Returns false if the given child is not a CurvePrimitive.
      */
     tryAddChild(child) {
@@ -183141,7 +183183,7 @@ class CurveChain extends CurveCollection {
             return this._curves[i];
         return undefined;
     }
-    /** invoke `curve.extendRange(range, transform)` for each child  */
+    /** Invoke `curve.extendRange(range, transform)` for each child  */
     extendRange(range, transform) {
         for (const curve of this._curves)
             curve.extendRange(range, transform);
@@ -183155,7 +183197,8 @@ class CurveChain extends CurveCollection {
             curve.reverseInPlace();
         this._curves.reverse();
     }
-    /** Return the index where target is found in the array of children
+    /**
+     * Return the index where target is found in the array of children
      * @param alsoSearchProxies whether to also check proxy curves of the children
     */
     childIndex(target, alsoSearchProxies) {
@@ -183174,8 +183217,7 @@ class CurveChain extends CurveCollection {
         }
         return undefined;
     }
-    /** Evaluate an indexed curve at a fraction.  Return as a CurveLocationDetail that indicates the primitive.
-     */
+    /** Evaluate an indexed curve at a fraction.  Return as a CurveLocationDetail that indicates the primitive. */
     primitiveIndexAndFractionToCurveLocationDetailPointAndDerivative(index, fraction, cyclic = false, result) {
         const primitive = this.cyclicCurvePrimitive(index, cyclic);
         if (primitive) {
@@ -183190,8 +183232,10 @@ class CurveChain extends CurveCollection {
  * @public
  */
 class BagOfCurves extends CurveCollection {
-    /** test if `other` is an instance of `BagOfCurves` */
-    isSameGeometryClass(other) { return other instanceof BagOfCurves; }
+    /** Test if `other` is an instance of `BagOfCurves` */
+    isSameGeometryClass(other) {
+        return other instanceof BagOfCurves;
+    }
     /** Construct an empty `BagOfCurves` */
     constructor() {
         super();
@@ -183200,8 +183244,10 @@ class BagOfCurves extends CurveCollection {
         this._children = [];
     }
     /** Return the (reference to) array of children */
-    get children() { return this._children; }
-    /** create with given curves. */
+    get children() {
+        return this._children;
+    }
+    /** Create with given curves. */
     static create(...data) {
         const result = new BagOfCurves();
         for (const child of data) {
@@ -183210,8 +183256,10 @@ class BagOfCurves extends CurveCollection {
         return result;
     }
     /** Return the boundary type (0) of a corresponding  MicroStation CurveVector */
-    dgnBoundaryType() { return 0; }
-    /** invoke `processor.announceBagOfCurves(this, indexInParent);` */
+    dgnBoundaryType() {
+        return 0;
+    }
+    /** Invoke `processor.announceBagOfCurves(this, indexInParent);` */
     announceToCurveProcessor(processor, indexInParent = -1) {
         return processor.announceBagOfCurves(this, indexInParent);
     }
@@ -183235,7 +183283,9 @@ class BagOfCurves extends CurveCollection {
         return clone;
     }
     /** Return an empty `BagOfCurves` */
-    cloneEmptyPeer() { return new BagOfCurves(); }
+    cloneEmptyPeer() {
+        return new BagOfCurves();
+    }
     /** Add a child  */
     tryAddChild(child) {
         if (child)
@@ -186422,7 +186472,7 @@ var CurveSearchStatus;
     CurveSearchStatus[CurveSearchStatus["stoppedAtBoundary"] = 2] = "stoppedAtBoundary";
 })(CurveSearchStatus || (CurveSearchStatus = {}));
 /**
- * use to update a vector in case where source and prior result are both possibly undefined.
+ * Use to update a vector in case where source and prior result are both possibly undefined.
  * * Any undefined source returns undefined.
  * * For defined source, reuse optional result if available.
  * @param source optional source
@@ -186441,6 +186491,7 @@ function optionalVectorUpdate(source, result) {
  * @public
  */
 class CurveLocationDetail {
+    /** constructor */
     constructor() {
         this.pointQ = _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_0__.Point3d.createZero();
         this.fraction = 0;
@@ -186456,21 +186507,22 @@ class CurveLocationDetail {
         this.fraction1 = fraction1;
         this.point1 = point1;
     }
-    /** test if this pair has fraction1 defined */
+    /** Test if this pair has fraction1 defined */
     get hasFraction1() {
         return this.fraction1 !== undefined;
     }
-    /** test if this is an isolated point. This is true if intervalRole is any of (undefined, isolated, isolatedAtVertex) */
+    /** Test if this is an isolated point. This is true if intervalRole is any of (undefined, isolated, isolatedAtVertex) */
     get isIsolated() {
         return this.intervalRole === undefined
             || this.intervalRole === CurveIntervalRole.isolated
             || this.intervalRole === CurveIntervalRole.isolatedAtVertex;
     }
-    /** return the fraction delta. (0 if no fraction1) */
+    /** Return the fraction delta. (0 if no fraction1) */
     get fractionDelta() {
         return this.fraction1 !== undefined ? this.fraction1 - this.fraction : 0.0;
     }
-    /** If (fraction1, point1) are defined, make them the primary (and only) data.
+    /**
+     * If (fraction1, point1) are defined, make them the primary (and only) data.
      * * No action if undefined.
      */
     collapseToEnd() {
@@ -186483,14 +186535,16 @@ class CurveLocationDetail {
             this.point1 = undefined;
         }
     }
-    /** make (fraction, point) the primary (and only) data.
+    /**
+     * Make (fraction, point) the primary (and only) data.
      * * No action if undefined.
      */
     collapseToStart() {
         this.fraction1 = undefined;
         this.point1 = undefined;
     }
-    /** Return a complete copy, WITH CAVEATS . . .
+    /**
+     * Return a complete copy, WITH CAVEATS . . .
      * * curve member is copied as a reference.
      * * point and vector members are cloned.
      */
@@ -186534,22 +186588,19 @@ class CurveLocationDetail {
     setFR(fraction, ray, a = 0) {
         return this.setFP(fraction, ray.origin, ray.direction, a);
     }
-    /** Set the CurvePrimitive pointer, leaving all other properties untouched.
-     */
+    /** Set the CurvePrimitive pointer, leaving all other properties untouched. */
     setCurve(curve) { this.curve = curve; }
     /** record the distance from the CurveLocationDetail's point to the parameter point. */
     setDistanceTo(point) {
         this.a = this.point.distance(point);
     }
-    /** create with a CurvePrimitive pointer but no coordinate data.
-     */
+    /** Create with a CurvePrimitive pointer but no coordinate data. */
     static create(curve, result) {
         result = result ? result : new CurveLocationDetail();
         result.curve = curve;
         return result;
     }
-    /** create with CurvePrimitive pointer, fraction, and point coordinates.
-     */
+    /** Create with CurvePrimitive pointer, fraction, and point coordinates. */
     static createCurveFractionPoint(curve, fraction, point, result) {
         result = result ? result : new CurveLocationDetail();
         result.curve = curve;
@@ -186560,9 +186611,7 @@ class CurveLocationDetail {
         result.curveSearchStatus = undefined;
         return result;
     }
-    /**
-     * Create a new detail with only ray, fraction, and point.
-     */
+    /** Create a new detail with only ray, fraction, and point. */
     static createRayFractionPoint(ray, fraction, point, result) {
         result = result ? result : new CurveLocationDetail();
         result.fraction = fraction;
@@ -186570,8 +186619,7 @@ class CurveLocationDetail {
         result.point.setFromPoint3d(point);
         return result;
     }
-    /** create with CurvePrimitive pointer, fraction, and point coordinates
-     */
+    /** Create with CurvePrimitive pointer, fraction, and point coordinates */
     static createCurveFractionPointDistanceCurveSearchStatus(curve, fraction, point, distance, status, result) {
         result = result ? result : new CurveLocationDetail();
         result.curve = curve;
@@ -186582,9 +186630,7 @@ class CurveLocationDetail {
         result.curveSearchStatus = status;
         return result;
     }
-    /** create with curveSearchStatus affected by allowExtension.
-     * *
-     */
+    /** Create with curveSearchStatus affected by allowExtension. */
     static createConditionalMoveSignedDistance(allowExtension, curve, startFraction, endFraction, requestedSignedDistance, result) {
         let a = requestedSignedDistance;
         let status = CurveSearchStatus.success;
@@ -186610,8 +186656,7 @@ class CurveLocationDetail {
         result.curveSearchStatus = status;
         return result;
     }
-    /** create with CurvePrimitive pointer and fraction for evaluation.
-     */
+    /** Create with CurvePrimitive pointer and fraction for evaluation. */
     static createCurveEvaluatedFraction(curve, fraction, result) {
         result = result ? result : new CurveLocationDetail();
         result.curve = curve;
@@ -186622,8 +186667,7 @@ class CurveLocationDetail {
         result.a = 0.0;
         return result;
     }
-    /** create with CurvePrimitive pointer and fraction for evaluation.
-     */
+    /** Create with CurvePrimitive pointer and fraction for evaluation. */
     static createCurveEvaluatedFractionPointAndDerivative(curve, fraction, result) {
         result = result ? result : new CurveLocationDetail();
         result.curve = curve;
@@ -186635,8 +186679,7 @@ class CurveLocationDetail {
         result.a = 0.0;
         return result;
     }
-    /** create with CurvePrimitive pointer and 2 fractions for evaluation.
-     */
+    /** Create with CurvePrimitive pointer and 2 fractions for evaluation. */
     static createCurveEvaluatedFractionFraction(curve, fraction0, fraction1, result) {
         result = result ? result : new CurveLocationDetail();
         result.curve = curve;
@@ -186649,8 +186692,7 @@ class CurveLocationDetail {
         result.a = 0.0;
         return result;
     }
-    /** create with CurvePrimitive pointer, fraction, and point coordinates.
-     */
+    /** Create with CurvePrimitive pointer, fraction, and point coordinates. */
     static createCurveFractionPointDistance(curve, fraction, point, a, result) {
         result = result ? result : new CurveLocationDetail();
         result.curve = curve;
@@ -186661,7 +186703,8 @@ class CurveLocationDetail {
         result.curveSearchStatus = undefined;
         return result;
     }
-    /** update or create if closer than current contents.
+    /**
+     * Update or create if closer than current contents.
      * @param curve candidate curve
      * @param fraction candidate fraction
      * @param point candidate point
@@ -186675,7 +186718,7 @@ class CurveLocationDetail {
         return true;
     }
     /**
-     * * Exchange the (fraction,fraction1) and (point, point1) pairs.
+     * Exchange the (fraction,fraction1) and (point, point1) pairs.
      * * (Skip each swap if its "1" value is undefined)
      */
     swapFractionsAndPoints() {
@@ -186691,7 +186734,7 @@ class CurveLocationDetail {
         }
     }
     /**
-     * * return the fraction where f falls between fraction and fraction1.
+     * Return the fraction where f falls between fraction and fraction1.
      * * ASSUME fraction1 defined
      */
     inverseInterpolateFraction(f, defaultFraction = 0) {
@@ -186714,7 +186757,8 @@ class CurveLocationDetail {
         return detailB;
     }
 }
-/** Enumeration of configurations for intersections and min/max distance-between-curve
+/**
+ * Enumeration of configurations for intersections and min/max distance-between-curve
  * @public
  */
 var CurveCurveApproachType;
@@ -186728,7 +186772,8 @@ var CurveCurveApproachType;
     /** Completely parallel geometry. */
     CurveCurveApproachType[CurveCurveApproachType["ParallelGeometry"] = 3] = "ParallelGeometry";
 })(CurveCurveApproachType || (CurveCurveApproachType = {}));
-/** A pair of CurveLocationDetail.
+/**
+ * A pair of CurveLocationDetail.
  * @public
  */
 class CurveLocationDetailPair {
@@ -186743,7 +186788,8 @@ class CurveLocationDetailPair {
         result.detailB = detailB;
         return result;
     }
-    /** Create a curve detail pair using references to two CurveLocationDetails.
+    /**
+     * Create a curve detail pair using references to two CurveLocationDetails.
      * * optionally install in reversed positions
      */
     static createCaptureOptionalReverse(detailA, detailB, reversed, result) {
@@ -186822,20 +186868,21 @@ __webpack_require__.r(__webpack_exports__);
 
 
 /**
- * A curve primitive is bounded
+ * A curve primitive is bounded.
  * A curve primitive maps fractions in 0..1 to points in space.
  * As the fraction proceeds from 0 towards 1, the point moves "forward" along the curve.
  * True distance along the curve is not always strictly proportional to fraction.
- * * LineSegment3d always has proportional fraction and distance
- * * an Arc3d which is true circular has proportional fraction and distance
- * *  A LineString3d is not proportional (except for special case of all segments of equal length)
- * * A Spiral3d is proportional
+ * * A LineSegment3d always has proportional fraction and distance.
+ * * An Arc3d which is true circular has proportional fraction and distance.
+ * * A LineString3d is not proportional (except for special case of all segments of equal length).
+ * * A Spiral3d is proportional.
  * * A BsplineCurve3d is only proportional for special cases.
- *
- * For fractions outside 0..1, the curve primitive class may either (a) return the near endpoint or (b) evaluate an extended curve.
+ * For fractions outside 0..1, the curve primitive class may either (a) return the near endpoint or (b) evaluate
+ * an extended curve.
  * @public
  */
 class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.GeometryQuery {
+    /** Constructor */
     constructor() {
         super();
         /** String name for schema properties */
@@ -186863,30 +186910,35 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
         const b = data.vectorU.magnitude();
         return _Geometry__WEBPACK_IMPORTED_MODULE_2__.Geometry.conditionalDivideFraction(a, b * b * b);
     }
-    /** Construct a frenet frame:
+    /**
+     * Construct a frenet frame:
      * * origin at the point on the curve
      * * x axis is unit vector along the curve (tangent)
-     * * y axis is perpendicular and in the plane of the osculating circle.
-     * * z axis perpendicular to those.
+     * * y axis is perpendicular and in the plane of the osculating circle. y axis is called "main normal"
+     * * z axis perpendicular to those. z axis is called "bi-normal"
      */
     fractionToFrenetFrame(fraction, result) {
         const plane = this.fractionToPointAnd2Derivatives(fraction);
         if (!plane)
             return undefined;
+        // first derivative (plane.vectorU) and second derivative (plane.vectorV) are not essentially
+        // perpendicular so we use createRigidFromColumns to make 3 perpendicular vectors.
         let axes = _geometry3d_Matrix3d__WEBPACK_IMPORTED_MODULE_3__.Matrix3d.createRigidFromColumns(plane.vectorU, plane.vectorV, _Geometry__WEBPACK_IMPORTED_MODULE_2__.AxisOrder.XYZ);
         if (axes)
             return _geometry3d_Transform__WEBPACK_IMPORTED_MODULE_4__.Transform.createRefs(plane.origin, axes, result);
-        // 2nd derivative not distinct -- do arbitrary headsUP ...
+        // 2nd derivative not distinct. for example if curve is linear at fraction so second derivative is 0.
+        // in this case we find perpendicular vector to plane.vectorU and pass it to createRigidFromColumns.
         const perpVector = _geometry3d_Matrix3d__WEBPACK_IMPORTED_MODULE_3__.Matrix3d.createPerpendicularVectorFavorXYPlane(plane.vectorU, plane.vectorV);
         axes = _geometry3d_Matrix3d__WEBPACK_IMPORTED_MODULE_3__.Matrix3d.createRigidFromColumns(plane.vectorU, perpVector, _Geometry__WEBPACK_IMPORTED_MODULE_2__.AxisOrder.XYZ);
         if (axes)
             return _geometry3d_Transform__WEBPACK_IMPORTED_MODULE_4__.Transform.createRefs(plane.origin, axes, result);
         return undefined;
     }
-    /** Construct signed distance from a point on the curve to its center of curvature (in xy only).
-     * * Positive is to the left of the xy tangent.
-     * * negative is to the right of the xy tangent.
-     * * linear curve is 0.
+    /**
+     * Construct signed distance from a point on the planar curve to its center of curvature (in xy only).
+     * * Positive distance means the center is to the left of the curve at fraction.
+     * * Negative distance means the center is to the right of the curve at fraction.
+     * * Zero distance means curve is linear at fraction.
      */
     fractionToSignedXYRadiusOfCurvature(fraction) {
         const plane = this.fractionToPointAnd2Derivatives(fraction);
@@ -186911,7 +186963,7 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
         return ray.fractionToPoint(distance);
     }
     /**
-     * return the length of the curve.
+     * Return the length of the curve.
      * * Curve length is always positive.
      */
     curveLength() {
@@ -186920,9 +186972,9 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
         return context.getSum();
     }
     /**
-     * Returns a (high accuracy) length of the curve between fractional positions
+     * Returns a (high accuracy) length of the curve between fractional positions.
      * * Curve length is always positive.
-     * * Default implementation applies a generic gaussian integration.
+     * * Default implementation applies a generic Gaussian integration.
      * * Most curve classes (certainly LineSegment, LineString, Arc) are expected to provide efficient implementations.
      */
     curveLengthBetweenFractions(fraction0, fraction1) {
@@ -186930,7 +186982,7 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
             return 0.0;
         const scale = this.getFractionToDistanceScale();
         if (scale !== undefined) {
-            // We are in luck! simple proportions determine it all  !!!
+            // We are in luck! simple proportions determine it all !!!
             // (for example, a LineSegment3d or a circular arc)
             const totalLength = this.curveLength();
             return Math.abs((fraction1 - fraction0) * totalLength);
@@ -186941,14 +186993,14 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
     }
     /**
      * Returns a (high accuracy) range of the curve between fractional positions
-     * * Default implementation returns teh range of the curve from clonePartialCurve
+     * * Default implementation returns the range of the curve from clonePartialCurve
      */
     rangeBetweenFractions(fraction0, fraction1, transform) {
         return this.rangeBetweenFractionsByClone(fraction0, fraction1, transform);
     }
     /**
      * Returns a (high accuracy) range of the curve between fractional positions
-     * * Default implementation returns teh range of the curve from clonePartialCurve
+     * * Default implementation returns the range of the curve from clonePartialCurve
      */
     rangeBetweenFractionsByClone(fraction0, fraction1, transform) {
         if (fraction0 === fraction1)
@@ -186962,12 +187014,16 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
      * Returns an approximate range based on a fixed number of evaluations
      * * Default implementation returns a range determined by evaluating a specified number of points on the curve.
      * * Optional evaluate again at interval midpoints and extrapolate any increase
-     * * For a smooth curve, Richardson extrapolation suggests each subdivision moves 3/4 of the way to final. So extrapolationFactor
-     *            of 1/3 gets speculatively moves closer to the tight range, and larger multipliers increase confidence in being safely larger.
+     * * For a smooth curve, Richardson extrapolation suggests each subdivision moves 3/4 of the way to final. So
+     * extrapolationFactor of 1/3 gets speculatively moves closer to the tight range, and larger multipliers increase
+     * confidence in being safely larger.
+     * * This function is faster version to compute the range of a portion of a curve (because some curves can be
+     * expensive to compute the partial curve and/or to compute the partial curve's range.
      * @param fraction0 start fraction for evaluation
      * @param fraction1 end fraction for evaluation
      * @param count number of points to evaluate
-     * @param extrapolationFactor if positive, evaluate again at interval midpoints and apply this fraction multiplier to any increase in size.
+     * @param extrapolationFactor if positive, evaluate again at interval midpoints and apply this fraction multiplier
+     * to any increase in size.
      */
     rangeBetweenFractionsByCount(fraction0, fraction1, count, transform, extrapolationFactor = 0.0) {
         const range = _geometry3d_Range__WEBPACK_IMPORTED_MODULE_6__.Range3d.createNull();
@@ -186992,8 +187048,8 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
             evaluateSteps(fraction0 + globalFractionStep, globalFractionStep, interiorCount);
         }
         if (extrapolationFactor > 0.0) {
-            // Evaluate at midpoints.  Where this makes the range larger, apply extrapolationFactor to move it to safer excess value.
-            // same interior step, but shift to interval midpoints:.
+            // Evaluate at midpoints.  Where this makes the range larger, apply extrapolationFactor to move it to safer
+            // excess value. same interior step, but shift to interval midpoints.
             const baseRange = range.clone();
             const interiorCount1 = interiorCount + 1;
             const localFraction0 = 0.5 / interiorCount1; // we only evaluate at new midpoints.
@@ -187004,13 +187060,13 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
         return range;
     }
     /**
-     *
-     * * Run an integration (with a default gaussian quadrature) with a fixed fractional step
+     * Run an integration (with a default Gaussian quadrature) with a fixed fractional step
      * * This is typically called by specific curve type implementations of curveLengthBetweenFractions.
-     *   * For example, in Arc3d implementation of curveLengthBetweenFractions:
+     * * For example, in Arc3d implementation of curveLengthBetweenFractions:
      *     * If the Arc3d is true circular, it the arc is true circular, use the direct `arcLength = radius * sweepRadians`
-     *     * If the Arc3d is not true circular, call this method with an interval count appropriate to eccentricity and sweepRadians.
-     * @returns Returns an integral estimated by numerical quadrature between the fractional positions.
+     *     * If the Arc3d is not true circular, call this method with an interval count appropriate to eccentricity and
+     * sweepRadians.
+     * @returns Returns the curve length via an integral estimated by numerical quadrature between the fractional positions.
      * @param fraction0 start fraction for integration
      * @param fraction1 end fraction for integration
      * @param numInterval number of quadrature intervals
@@ -187026,33 +187082,39 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
         return Math.abs(context.getSum());
     }
     /**
-     *
-     * * (Attempt to) find a position on the curve at a signed distance from start fraction.
+     * (Attempt to) find a position on the curve at a signed distance from start fraction.
      * * Return the position as a CurveLocationDetail.
      * * In the `CurveLocationDetail`, record:
      *   * `fraction` = fractional position
      *   * `point` = coordinates of the point
-     *   * `a` = (signed!) distance moved.   If `allowExtension` is false and the move reached the start or end of the curve, this distance is smaller than the requested signedDistance.
+     *   * `a` = (signed!) distance moved.   If `allowExtension` is false and the move reached the start or end of the
+     * curve, this distance is smaller than the requested signedDistance.
      *   * `curveSearchStatus` indicates one of:
      *     * `error` (unusual) computation failed not supported for this curve.
      *     * `success` full movement completed
      *     * `stoppedAtBoundary` partial movement completed. This can be due to either
      *        * `allowExtension` parameter sent as `false`
      *        * the curve type (e.g. bspline) does not support extended range.
-     * * if `allowExtension` is true, movement may still end at the startPoint or end point for curves that do not support extended geometry (specifically bsplines)
-     * * if the curve returns a value (i.e. not `undefined`) for `curve.getFractionToDistanceScale()`, the base class carries out the computation
+     * * if `allowExtension` is true, movement may still end at the startPoint or end point for curves that do not support
+     * extended geometry (specifically bsplines)
+     * * if the curve returns a value (i.e. not `undefined`) for `curve.getFractionToDistanceScale()`, the base class
+     * carries out the computation
      *    and returns a final location.
      *   * LineSegment3d relies on this.
-     * * If the curve does not implement the computation or the curve has zero length, the returned `CurveLocationDetail` has
+     * * If the curve does not implement the computation or the curve has zero length, the returned `CurveLocationDetail`
+     * has
      *    * `fraction` = the value of `startFraction`
      *    * `point` = result of `curve.fractionToPoint(startFraction)`
      *    * `a` = 0
      *    * `curveStartState` = `CurveSearchStatus.error`
      * @param startFraction fractional position where the move starts
      * @param signedDistance distance to move.   Negative distance is backwards in the fraction space
-     * @param allowExtension if true, all the move to go beyond the startPoint or endpoint of the curve.  If false, do not allow movement beyond the startPoint or endpoint
+     * @param allowExtension if true, all the move to go beyond the startPoint or endpoint of the curve.  If false, do not
+     * allow movement beyond the startPoint or endpoint
      * @param result optional result.
-     * @returns A CurveLocationDetail annotated as above.  Note that if the curve does not support the calculation, there is still a result which contains the point at the input startFraction, with failure indicated in the `curveStartState` member
+     * @returns A CurveLocationDetail annotated as above. Note that if the curve does not support the calculation, there is
+     * still a result which contains the point at the input startFraction, with failure indicated in the `curveStartState`
+     * member
      */
     moveSignedDistanceFromFraction(startFraction, signedDistance, allowExtension, result) {
         const scale = this.getFractionToDistanceScale();
@@ -187072,13 +187134,14 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
      * Generic algorithm to search for point at signed distance from a fractional startPoint.
      * * This will work for well for smooth curves.
      * * Curves with tangent or other low-order-derivative discontinuities may need to implement specialized algorithms.
-     * * We need to find an endFraction which is the end-of-interval (usually upper) limit of integration of the tangent magnitude from startFraction to endFraction
+     * * We need to find an endFraction which is the end-of-interval (usually upper) limit of integration of the tangent
+     * magnitude from startFraction to endFraction
      * * That integral is a function of endFraction.
      * * The derivative of that integral with respect to end fraction is the tangent magnitude at end fraction.
      * * Use that function and (easily evaluated!) derivative for a Newton iteration
-     * * TO ALL WHO HAVE FUZZY MEMORIES OF CALCULUS CLASS: "The derivative of the integral wrt upper limit is the value of the integrand there" is the
-     *       fundamental theorem of integral calculus !!! The fundamental theorem is not just an abstraction !!! It is being used
-     *       here in its barest possible form !!!
+     * * TO ALL WHO HAVE FUZZY MEMORIES OF CALCULUS CLASS: "The derivative of the integral wrt upper limit is the value
+     * of the integrand there" is the fundamental theorem of integral calculus !!! The fundamental theorem is not just
+     * an abstraction !!! It is being used  here in its barest possible form !!!
      * * See https://en.wikipedia.org/wiki/Fundamental_theorem_of_calculus
      * @param startFraction
      * @param signedDistance
@@ -187159,20 +187222,25 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
         return result;
     }
     /**
-     * * Returns true if the curve's fraction queries extend beyond 0..1.
+     * * Returns true if the curve can be easily extended past its start/end point (i.e., beyond the usual
+     * fraction space [0,1]). Otherwise, returns false.
      * * Base class default implementation returns false.
-     * * These class (and perhaps others in the future) will return true:
+     * * These classes (and perhaps others in the future) will return true:
      *   * LineSegment3d
      *   * LineString3d
      *   * Arc3d
      */
-    get isExtensibleFractionSpace() { return false; }
-    /** Search for the curve point that is closest to the spacePoint.
-     *
+    get isExtensibleFractionSpace() {
+        return false;
+    }
+    /**
+     * Search for a point on the curve that is closest to the spacePoint.
      * * If the space point is exactly on the curve, this is the reverse of fractionToPoint.
-     * * Since CurvePrimitive should always have start and end available as candidate points, this method should always succeed
+     * * Since CurvePrimitive should always have start and end available as candidate points, this method should always
+     * succeed
      * @param spacePoint point in space
-     * @param extend true to extend the curve (if possible), false for no extend, single CurveExtendOptions (for both directions), or array of distinct CurveExtendOptions for start and end.
+     * @param extend true to extend the curve (if possible), false for no extend, single CurveExtendOptions (for both
+     * directions), or array of distinct CurveExtendOptions for start and end.
      * @returns Returns a CurveLocationDetail structure that holds the details of the close point.
      */
     closestPoint(spacePoint, extend) {
@@ -187183,14 +187251,16 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
     /**
      * Find intervals of this curvePrimitive that are interior to a clipper
      * @param clipper clip structure (e.g. clip planes)
-     * @param announce (optional) function to be called announcing fractional intervals"  ` announce(fraction0, fraction1, curvePrimitive)`
+     * @param announce (optional) function to be called announcing fractional intervals
+     * `announce(fraction0, fraction1, curvePrimitive)`
      * @returns true if any "in" segments are announced.
      */
     announceClipIntervals(_clipper, _announce) {
         // DEFAULT IMPLEMENTATION -- no interior parts
         return false;
     }
-    /** Return (if possible) a curve primitive which is a portion of this curve.
+    /**
+     * Return (if possible) a curve primitive which is a portion of this curve.
      * @param _fractionA [in] start fraction
      * @param _fractionB [in] end fraction
      */
@@ -187198,8 +187268,8 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
         return undefined;
     }
     /**
-     * * If the curve primitive has distance-along-curve strictly proportional to curve fraction, return the scale factor.
-     * * If distance-along-the-curve is not proportional, return undefined.
+     * If the curve primitive has distance-along-curve strictly proportional to curve fraction, return the scale factor.
+     * If distance-along-the-curve is not proportional, return undefined.
      * * When defined, the scale factor is always the length of the curve.
      * * This scale factor is typically available for these curve types:
      * * * All `LineSegment3d`
@@ -187210,12 +187280,14 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
      * * * bspline and bezier curves
      * @returns scale factor or undefined
      */
-    getFractionToDistanceScale() { return undefined; }
+    getFractionToDistanceScale() {
+        return undefined;
+    }
     /**
-     * Compute intersections with a plane.
+     * Compute intersections of the curve with a plane.
      * * The intersections are appended to the result array.
-     * * The base class implementation emits strokes to an AppendPlaneIntersectionStrokeHandler object, which uses a Newton iteration to get
-     *     high-accuracy intersection points within strokes.
+     * * The base class implementation emits strokes to an AppendPlaneIntersectionStrokeHandler object, which uses a
+     * Newton iteration to get high-accuracy intersection points within strokes.
      * * Derived classes should override this default implementation if there are easy analytic solutions.
      * * Derived classes are free to implement extended intersections (e.g. arc!!!)
      * @param plane The plane to be intersected.
@@ -187232,8 +187304,8 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
      * Examine contents of an array of CurveLocationDetail.
      * Filter the intersections according to the parameters.
      * @param allowExtend if false, remove points on the extension.
-     * @param applySnappedCoordinates if true, change the stored fractions and coordinates to exact end values.  Otherwise
-     *     use the exact values only for purpose of updating the curveIntervalRole.
+     * @param applySnappedCoordinates if true, change the stored fractions and coordinates to exact end values.
+     * Otherwise use the exact values only for purpose of updating the curveIntervalRole.
      * @param startEndFractionTolerance if nonzero, adjust fraction to 0 or 1 with this tolerance.
      * @param startEndXYZTolerance if nonzero, adjust to endpoint with this tolerance.
      * @internal
@@ -187296,12 +187368,16 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
         if (acceptIndex < n0)
             details.length = acceptIndex;
     }
-    /** return the startPoint of the primitive.  The default implementation returns fractionToPoint (0.0) */
-    startPoint(result) { return this.fractionToPoint(0.0, result); }
-    /** return the end point of the primitive. The default implementation returns fractionToPoint(1.0) */
-    endPoint(result) { return this.fractionToPoint(1.0, result); }
+    /** Return the startPoint of the primitive. The default implementation returns fractionToPoint(0.0) */
+    startPoint(result) {
+        return this.fractionToPoint(0.0, result);
+    }
+    /** Return the end point of the primitive. The default implementation returns fractionToPoint(1.0) */
+    endPoint(result) {
+        return this.fractionToPoint(1.0, result);
+    }
     /**
-     * attach StrokeCountMap structure to this primitive (and recursively to any children)
+     * Attach StrokeCountMap structure to this primitive (and recursively to any children)
      * * Base class implementation (here) gets the simple count from computeStrokeCountForOptions and attaches it.
      * * LineString3d, arc3d, BezierCurve3d, BezierCurve3dH accept that default.
      * * Subdivided primitives (linestring, bspline curve) implement themselves and attach a StrokeCountMap containing the
@@ -187309,7 +187385,8 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
      * * For CurvePrimitiveWithDistanceIndex, the top level gets (only) a total count, and each child gets
      *       its own StrokeCountMap with appropriate structure.
      * @param options StrokeOptions that determine count
-     * @param parentStrokeMap optional map from parent.  Its count, curveLength, and a1 values are increased with count and distance from this primitive.
+     * @param parentStrokeMap optional map from parent.  Its count, curveLength, and a1 values are increased with count
+     * and distance from this primitive.
      * @return sum of `a0+this.curveLength()`, for use as `a0` of successor in chain.
      */
     computeAndAttachRecursiveStrokeCounts(options, parentMap) {
@@ -187318,8 +187395,9 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
         CurvePrimitive.installStrokeCountMap(this, _curve_Query_StrokeCountMap__WEBPACK_IMPORTED_MODULE_12__.StrokeCountMap.createWithCurvePrimitive(this, n, a, 0, a), parentMap);
     }
     /**
-     * * evaluate strokes at fractions indicated in a StrokeCountMap.
-     *   * Base class implementation (here) gets the simple count from computeStrokeCountForOptions and strokes at uniform fractions.
+     * Evaluate strokes at fractions indicated in a StrokeCountMap.
+     *   * Base class implementation (here) gets the simple count from computeStrokeCountForOptions and strokes at
+     * uniform fractions.
      *   * LineString3d, arc3d, BezierCurve3d, BezierCurve3dH accept that default.
      *   * Subdivided primitives (linestring, bspline curve) implement themselves and evaluate within components.
      *   * CurvePrimitiveWithDistanceIndex recurses to its children.
@@ -187339,7 +187417,7 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
         return linestring.numPoints() - numPoint0;
     }
     /**
-     * final install step to save curveMap in curve.  If parentMap is given, update its length, count, and a1 fields
+     * Final install step to save curveMap in curve. If parentMap is given, update its length, count, and a1 fields
      * @param curve curve to receive the annotation
      * @param map
      * @param parentMap
@@ -187353,8 +187431,10 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
      * Return an array containing only the curve primitives.
      * * This DEFAULT implementation simply pushes `this` to the collectorArray.
      * @param collectorArray array to receive primitives (pushed -- the array is not cleared)
-     * @param smallestPossiblePrimitives if true, a [[CurvePrimitiveWithDistanceIndex]] recurses on its (otherwise hidden) children. If false, it returns only itself.
-     * @param explodeLinestrings if true, push a [[LineSegment3d]] for each segment of a [[LineString3d]]. If false, push only the [[LineString3d]].
+     * @param smallestPossiblePrimitives if true, a [[CurvePrimitiveWithDistanceIndex]] recurses on its (otherwise hidden)
+     * children. If false, it returns only itself.
+     * @param explodeLinestrings if true, push a [[LineSegment3d]] for each segment of a [[LineString3d]]. If false,
+     * push only the [[LineString3d]].
      */
     collectCurvePrimitivesGo(collectorArray, _smallestPossiblePrimitives, _explodeLinestrings = false) {
         collectorArray.push(this);
@@ -187362,18 +187442,23 @@ class CurvePrimitive extends _GeometryQuery__WEBPACK_IMPORTED_MODULE_1__.Geometr
     /**
      * Return an array containing only the curve primitives.
      * * This DEFAULT implementation captures the optional collector and calls [[collectCurvePrimitivesGo]].
-     * @param collectorArray optional array to receive primitives.   If present, new primitives are ADDED (without clearing the array.)
-     * @param smallestPossiblePrimitives if false, CurvePrimitiveWithDistanceIndex returns only itself.  If true, it recurses to its (otherwise hidden) children.
+     * @param collectorArray optional array to receive primitives.   If present, new primitives are ADDED (without
+     * clearing the array.)
+     * @param smallestPossiblePrimitives if false, CurvePrimitiveWithDistanceIndex returns only itself.  If true,
+     * it recurses to its (otherwise hidden) children.
      */
     collectCurvePrimitives(collectorArray, smallestPossiblePrimitives = false, explodeLinestrings = false) {
         const results = collectorArray === undefined ? [] : collectorArray;
         this.collectCurvePrimitivesGo(results, smallestPossiblePrimitives, explodeLinestrings);
         return results;
     }
-    /** Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters of projection.
+    /**
+     * Project instance geometry (via dispatch) onto the line of the given ray, and return the extreme fractional
+     * parameters of projection.
      * @param ray ray onto which the instance is projected. A `Vector3d` is treated as a `Ray3d` with zero origin.
      * @param lowHigh optional receiver for output
-     * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is the end of the ray.
+     * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is the
+     * end of the ray.
      */
     projectedParameterRange(_ray, _lowHigh) {
         return undefined; // common implementation delegated to subclasses to avoid circular dependency
@@ -187620,13 +187705,14 @@ __webpack_require__.r(__webpack_exports__);
 /* harmony import */ var _geometry3d_Transform__WEBPACK_IMPORTED_MODULE_1__ = __webpack_require__(/*! ../geometry3d/Transform */ "../../core/geometry/lib/esm/geometry3d/Transform.js");
 
 
-/** Queries to be supported by Curve, Surface, and Solid objects */
 /**
- * * `GeometryQuery` is an abstract base class with (abstract) methods for querying curve, solid primitive, mesh, and bspline surfaces
+ * Queries to be supported by Curve, Surface, and Solid objects
+ * * `GeometryQuery` is an abstract base class with (abstract) methods for querying curve, solid primitive, mesh,
+ * and bspline surfaces
  * @public
  */
 class GeometryQuery {
-    /** return the range of the entire (tree) GeometryQuery */
+    /** Return the range of the entire (tree) GeometryQuery */
     range(transform, result) {
         if (result)
             result.setNull();
@@ -187634,17 +187720,17 @@ class GeometryQuery {
         this.extendRange(range, transform);
         return range;
     }
-    /** try to move the geometry by dx,dy,dz */
+    /** Try to move the geometry by dx,dy,dz */
     tryTranslateInPlace(dx, dy = 0.0, dz = 0.0) {
         return this.tryTransformInPlace(_geometry3d_Transform__WEBPACK_IMPORTED_MODULE_1__.Transform.createTranslationXYZ(dx, dy, dz));
     }
-    /** return GeometryQuery children for recursive queries.
-     *
+    /**
+     * Return GeometryQuery children for recursive queries.
      * * leaf classes do not need to implement.
      */
     get children() { return undefined; }
-    /** test for exact structure and nearly identical geometry.
-     *
+    /**
+     * Test for exact structure and nearly identical geometry.
      * *  Leaf classes must implement !!!
      * *  base class implementation recurses through children.
      * *  base implementation is complete for classes with children and no properties.
@@ -187673,7 +187759,8 @@ class GeometryQuery {
         }
         return false;
     }
-    /** apply instance method isAlmostEqual if both are defined.
+    /**
+     * Apply instance method isAlmostEqual if both are defined.
      * * both undefined returns true
      * * single defined returns false
      */
@@ -187729,33 +187816,41 @@ __webpack_require__.r(__webpack_exports__);
 /* eslint-disable @typescript-eslint/naming-convention, no-empty */
 /**
  * A LineSegment3d is:
- *
  * * A 3d line segment represented by its start and end coordinates
  *   * startPoint
  *   * endPoint
- * * The segment is parameterized with fraction 0 at the start and fraction 1 at the end, i.e. either of these equivalent forms to map fraction `f` to a point `X(f)`
+ * * The segment is parameterized with fraction 0 at the start and fraction 1 at the end, i.e. either of these
+ * equivalent forms to map fraction `f` to a point `X(f)`
  * ```
  * equation
- *  X(f) = P_0 + f * (P_1 - P_0)\newline
- *  X(f) = (1-f)*P_0  + f * P_0
+ *  X(f) = P_0 + f*(P_1 - P_0)\newline
+ *  X(f) = (1-f)*P_0 + f*P_1
  * ```
  * @public
  */
 class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive {
-    /** test if `other` is of class `LineSegment3d` */
-    isSameGeometryClass(other) { return other instanceof LineSegment3d; }
-    /** Return REFERENCE to the start point of this segment.
-     * * (This is distinct from the `CurvePrimitive` abstract method `endPoint()` which creates a returned point
-     */
-    get point0Ref() { return this._point0; }
-    /** Return REFERENCE to the end point of this segment.
+    /** Test if `other` is of class `LineSegment3d` */
+    isSameGeometryClass(other) {
+        return other instanceof LineSegment3d;
+    }
+    /**
+     * Return REFERENCE to the start point of this segment.
      * * (This is distinct from the `CurvePrimitive` abstract method `endPoint()` which creates a returned point
      */
-    get point1Ref() { return this._point1; }
+    get point0Ref() {
+        return this._point0;
+    }
     /**
-     * A LineSegment3d extends along its infinite line.
+     * Return REFERENCE to the end point of this segment.
+     * * (This is distinct from the `CurvePrimitive` abstract method `endPoint()` which creates a returned point
      */
-    get isExtensibleFractionSpace() { return true; }
+    get point1Ref() {
+        return this._point1;
+    }
+    /** A LineSegment3d extends along its infinite line. */
+    get isExtensibleFractionSpace() {
+        return true;
+    }
     /**
      * CAPTURE point references as a `LineSegment3d`
      * @param point0
@@ -187769,12 +187864,21 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         this._point1 = point1;
     }
     /** Set the start and endpoints by capturing input references. */
-    setRefs(point0, point1) { this._point0 = point0; this._point1 = point1; }
+    setRefs(point0, point1) {
+        this._point0 = point0;
+        this._point1 = point1;
+    }
     /** Set the start and endpoints by cloning the input parameters. */
-    set(point0, point1) { this._point0 = point0.clone(); this._point1 = point1.clone(); }
-    /** copy (clone) data from other */
-    setFrom(other) { this._point0.setFrom(other._point0); this._point1.setFrom(other._point1); }
-    /** Return a (clone of) the start point. (This is NOT a reference to the stored start point) */
+    set(point0, point1) {
+        this._point0 = point0.clone();
+        this._point1 = point1.clone();
+    }
+    /** Copy (clone) data from other */
+    setFrom(other) {
+        this._point0.setFrom(other._point0);
+        this._point1.setFrom(other._point1);
+    }
+    /** Return a (clone of) the start point (This is NOT a reference to the stored start point) */
     startPoint(result) {
         if (result) {
             result.setFrom(this._point0);
@@ -187782,7 +187886,7 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         }
         return this._point0.clone();
     }
-    /** Return a (clone of) the end point. (This is NOT a reference to the stored end point) */
+    /** Return a (clone of) the end point (This is NOT a reference to the stored end point) */
     endPoint(result) {
         if (result) {
             result.setFrom(this._point1);
@@ -187797,7 +187901,8 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         this._point0.interpolate(fraction, this._point1, result.origin);
         return result;
     }
-    /** Construct a plane with
+    /**
+     * Construct a plane with
      * * origin at the fractional position along the line segment
      * * x axis is the first derivative, i.e. along the line segment
      * * y axis is the second derivative, i.e. 000
@@ -187810,7 +187915,9 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         return result;
     }
     /** Clone the LineSegment3d */
-    clone() { return LineSegment3d.create(this._point0, this._point1); }
+    clone() {
+        return LineSegment3d.create(this._point0, this._point1);
+    }
     /** Clone and apply transform to the clone. */
     cloneTransformed(transform) {
         const c = this.clone();
@@ -187829,7 +187936,8 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
     static createCapture(point0, point1) {
         return new LineSegment3d(point0, point1);
     }
-    /** create a LineSegment3d from xy coordinates of start and end, with common z.
+    /**
+     * Create a LineSegment3d from xy coordinates of start and end, with common z.
      * @param x0 start point x coordinate.
      * @param y0 start point y coordinate.
      * @param x1 end point x coordinate.
@@ -187845,7 +187953,8 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         }
         return new LineSegment3d(_geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Point3d.create(x0, y0, z), _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Point3d.create(x1, y1, z));
     }
-    /** create a LineSegment3d from xy coordinates of start and end, with common z.
+    /**
+     * Create a LineSegment3d from xy coordinates of start and end, with common z.
      * @param x0 start point x coordinate.
      * @param y0 start point y coordinate.
      * @param x1 end point x coordinate.
@@ -187862,19 +187971,26 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         return new LineSegment3d(_geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Point3d.create(x0, y0, z0), _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Point3d.create(x1, y1, z1));
     }
     /** Return the point at fractional position along the line segment. */
-    fractionToPoint(fraction, result) { return this._point0.interpolate(fraction, this._point1, result); }
+    fractionToPoint(fraction, result) {
+        return this._point0.interpolate(fraction, this._point1, result);
+    }
     /** Return the length of the segment. */
-    curveLength() { return this._point0.distance(this._point1); }
+    curveLength() {
+        return this._point0.distance(this._point1);
+    }
     /** Return the length of the partial segment between fractions. */
     curveLengthBetweenFractions(fraction0, fraction1) {
         return Math.abs(fraction1 - fraction0) * this._point0.distance(this._point1);
     }
     /** Return the length of the segment. */
-    quickLength() { return this.curveLength(); }
+    quickLength() {
+        return this.curveLength();
+    }
     /**
      * Returns a curve location detail with both xyz and fractional coordinates of the closest point.
      * @param spacePoint point in space
-     * @param extend if false, only return points within the bounded line segment. If true, allow the point to be on the unbounded line that contains the bounded segment.
+     * @param extend if false, only return points within the bounded line segment. If true, allow the point to be on
+     * the unbounded line that contains the bounded segment.
      */
     closestPoint(spacePoint, extend, result) {
         let fraction = spacePoint.fractionOfProjectionToLine(this._point0, this._point1, 0.0);
@@ -187888,7 +188004,7 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         result.a = result.point.distance(spacePoint);
         return result;
     }
-    /** swap the endpoint references. */
+    /** Swap the endpoint references. */
     reverseInPlace() {
         const a = this._point0;
         this._point0 = this._point1;
@@ -187905,7 +188021,8 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         return _Geometry__WEBPACK_IMPORTED_MODULE_6__.Geometry.isSmallMetricDistance(plane.altitude(this._point0))
             && _Geometry__WEBPACK_IMPORTED_MODULE_6__.Geometry.isSmallMetricDistance(plane.altitude(this._point1));
     }
-    /** Compute points of simple (transverse) with a plane.
+    /**
+     * Compute points of simple (transverse) with a plane.
      * * Use isInPlane to test if the line segment is completely in the plane.
      */
     appendPlaneIntersectionPoints(plane, result) {
@@ -187963,12 +188080,16 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         }
     }
     /** A simple line segment's fraction and distance are proportional. */
-    getFractionToDistanceScale() { return this.curveLength(); }
+    getFractionToDistanceScale() {
+        return this.curveLength();
+    }
     /**
      * Place the lineSegment3d start and points in a json object
      * @return {*} [[x,y,z],[x,y,z]]
      */
-    toJSON() { return [this._point0.toJSON(), this._point1.toJSON()]; }
+    toJSON() {
+        return [this._point0.toJSON(), this._point1.toJSON()];
+    }
     /** Create a new `LineSegment3d` with coordinates from json object.   See `setFromJSON` for object layout description. */
     static fromJSON(json) {
         const result = new LineSegment3d(_geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Point3d.createZero(), _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_3__.Point3d.create());
@@ -187996,7 +188117,7 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         handler.endCurvePrimitive(this);
     }
     /**
-     * return the stroke count required for given options.
+     * Return the stroke count required for given options.
      * @param options StrokeOptions that determine count
      */
     computeStrokeCountForOptions(options) {
@@ -188008,19 +188129,20 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         }
         return numStroke;
     }
-    /** Second step of double dispatch:  call `handler.handleLineSegment3d(this)` */
+    /** Second step of double dispatch: call `handler.handleLineSegment3d(this)` */
     dispatchToGeometryHandler(handler) {
         return handler.handleLineSegment3d(this);
     }
     /**
      * Find intervals of this curve primitive that are interior to a clipper
      * @param clipper clip structure (e.g. clip planes)
-     * @param announce function to be called announcing fractional intervals"  ` announce(fraction0, fraction1, curvePrimitive)`
+     * @param announce function to be called announcing fractional intervals `announce(fraction0, fraction1, curvePrimitive)`
      */
     announceClipIntervals(clipper, announce) {
         return clipper.announceClippedSegmentIntervals(0.0, 1.0, this._point0, this._point1, announce ? (fraction0, fraction1) => announce(fraction0, fraction1, this) : undefined);
     }
-    /** Return (if possible) a curve primitive which is a portion of this curve.
+    /**
+     * Return (if possible) a curve primitive which is a portion of this curve.
      * @param fractionA [in] start fraction
      * @param fractionB [in] end fraction
      */
@@ -188060,10 +188182,13 @@ class LineSegment3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePr
         }
         return undefined;
     }
-    /** Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters of projection.
+    /**
+     * Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters of
+     * projection.
      * @param ray ray onto which the instance is projected. A `Vector3d` is treated as a `Ray3d` with zero origin.
      * @param lowHigh optional receiver for output
-     * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is the end of the ray.
+     * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is the
+     * end of the ray.
      */
     projectedParameterRange(ray, lowHigh) {
         return _internalContexts_PlaneAltitudeRangeContext__WEBPACK_IMPORTED_MODULE_10__.PlaneAltitudeRangeContext.findExtremeFractionsAlongDirection(this, ray, lowHigh);
@@ -188124,11 +188249,12 @@ __webpack_require__.r(__webpack_exports__);
 
 
 /* eslint-disable @typescript-eslint/naming-convention, no-empty */
-/* Starting with baseIndex and moving index by stepDirection:
-If the vector from baseIndex to baseIndex +1 crossed with vectorA can be normalized, accumulate it (scaled) to normal.
-Return when successful.
-(Do nothing if everything is parallel through limits of the array)
-*/
+/**
+ * Starting with baseIndex and moving index by stepDirection:
+ * If the vector from baseIndex to baseIndex +1 crossed with vectorA can be normalized, accumulate it (scaled) to normal.
+ * Return when successful.
+ * (Do nothing if everything is parallel through limits of the array)
+ */
 function accumulateGoodUnitPerpendicular(points, vectorA, baseIndex, stepDirection, weight, normal, workVector) {
     const n = points.length;
     if (stepDirection > 0) {
@@ -188156,43 +188282,67 @@ function accumulateGoodUnitPerpendicular(points, vectorA, baseIndex, stepDirecti
     return false;
 }
 /**
- * * A LineString3d (sometimes called a PolyLine) is a sequence of xyz coordinates that are to be joined by line segments.
- * * The point coordinates are stored in a GrowableXYZArray, not as full point objects
+ * * A LineString3d (sometimes called a PolyLine) is a sequence of xyz coordinates that are to be joined by line
+ * segments.
+ * * The point coordinates are stored in a GrowableXYZArray, not as full point objects.
  * * The parameterization of "fraction along" is
- *    * In a linestring with `N` segments (i.e. `N+1` points), each segment (regardless of physical length) occupies the same fraction (1/N) of the 0-to-1 fraction space.
+ *    * In a linestring with `N` segments (i.e. `N+1` points), each segment (regardless of physical length) occupies
+ * the same fraction (1/N) of the 0-to-1 fraction space.
  *    * Within segment `i`, the fraction interval `i/N` to `(i+1)/N` is mapped proportionally to the segment
  *    * Note that this `fraction` is therefore NOT fraction of true distance along.
- *       * Use `moveSignedDistanceFromFraction` to do true-length evaluations.
+ *    * Use `moveSignedDistanceFromFraction` to do true-length evaluations.
  * @public
  */
 class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePrimitive {
     /** test if `other` is an instance of `LineString3d` */
-    isSameGeometryClass(other) { return other instanceof LineString3d; }
-    /**
-     * A LineString3d extends along its first and final segments.
-     */
-    get isExtensibleFractionSpace() { return true; }
-    /** return the points array (cloned). */
-    get points() { return this._points.getPoint3dArray(); }
+    isSameGeometryClass(other) {
+        return other instanceof LineString3d;
+    }
+    /** A LineString3d extends along its first and final segments. */
+    get isExtensibleFractionSpace() {
+        return true;
+    }
+    /** Return the points array (cloned). */
+    get points() {
+        return this._points.getPoint3dArray();
+    }
     /** Return (reference to) point data in packed GrowableXYZArray. */
-    get packedPoints() { return this._points; }
-    /** Return array of fraction parameters.
+    get packedPoints() {
+        return this._points;
+    }
+    /**
+     * Return array of fraction parameters.
      * * These Are only present during certain constructions such as faceting.
-     * * When present, these fractions are fractions of some other curve being stroked, and are NOT related to the linestring fraction parameters.
+     * * When present, these fractions are fractions of some other curve being stroked, and are NOT related to the
+     * linestring fraction parameters.
      */
-    get fractions() { return this._fractions; }
+    get fractions() {
+        return this._fractions;
+    }
     /** Return the (optional) array of derivatives. These Are only present during certain constructions such as faceting. */
-    get packedDerivatives() { return this._derivatives; }
+    get packedDerivatives() {
+        return this._derivatives;
+    }
     /** Return the (optional) array of uv params. These Are only present during certain constructions such as faceting. */
-    get packedUVParams() { return this._uvParams; }
+    get packedUVParams() {
+        return this._uvParams;
+    }
     /** Return the (optional) array of surface normals. These Are only present during certain constructions such as faceting. */
-    get packedSurfaceNormals() { return this._surfaceNormals; }
+    get packedSurfaceNormals() {
+        return this._surfaceNormals;
+    }
     /** Return the (optional) array of normal indices. These Are only present during certain constructions such as faceting. */
-    get normalIndices() { return this._normalIndices; }
+    get normalIndices() {
+        return this._normalIndices;
+    }
     /** Return the (optional) array of param indices. These Are only present during certain constructions such as faceting. */
-    get paramIndices() { return this._uvIndices; }
+    get paramIndices() {
+        return this._uvIndices;
+    }
     /** Return the (optional) array of point indices. These Are only present during certain constructions such as faceting. */
-    get pointIndices() { return this._pointIndices; }
+    get pointIndices() {
+        return this._pointIndices;
+    }
     constructor(points) {
         super();
         /** String name for schema properties */
@@ -188208,7 +188358,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         c.tryTransformInPlace(transform);
         return c;
     }
-    /** Create a linestring, using flex length arg list and any typical combination of points such as
+    /**
+     * Create a linestring, using flex length arg list and any typical combination of points such as
      * Point3d, Point2d, `[1,2,3]', array of any of those, or GrowableXYZArray
      */
     static create(...points) {
@@ -188216,7 +188367,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         result.addPoints(points);
         return result;
     }
-    /** Create a linestring, capturing the given GrowableXYZArray as the points.
+    /**
+     * Create a linestring, capturing the given GrowableXYZArray as the points.
      * Point3d, Point2d, `[1,2,3]', array of any of those, or GrowableXYZArray
      */
     static createCapture(points) {
@@ -188241,7 +188393,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         }
         return result;
     }
-    /** Add points to the linestring.
+    /**
+     * Add points to the linestring.
      * Valid inputs are:
      * * a Point2d
      * * a point3d
@@ -188393,9 +188546,7 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
             this._surfaceNormals = new _geometry3d_GrowableXYZArray__WEBPACK_IMPORTED_MODULE_1__.GrowableXYZArray();
         this._surfaceNormals.push(vector);
     }
-    /**
-     * If the linestring is not already closed, add a closure point.
-     */
+    /** If the linestring is not already closed, add a closure point. */
     addClosurePoint() {
         const distance = this._points.distanceIndexIndex(0, this._points.length - 1);
         if (distance !== undefined && !_Geometry__WEBPACK_IMPORTED_MODULE_2__.Geometry.isSameCoordinate(distance, 0))
@@ -188409,7 +188560,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
     computeUVFromXYZTransform(transform) {
         this._uvParams = _geometry3d_GrowableXYArray__WEBPACK_IMPORTED_MODULE_4__.GrowableXYArray.createFromGrowableXYZArray(this._points, transform);
     }
-    /** Create the linestring for a rectangle parallel to the xy plane.
+    /**
+     * Create the linestring for a rectangle parallel to the xy plane.
      * * The z coordinate from `point0` is used for all points.
      * * `ax` and `ay` are signed.
      * * The point sequence is:
@@ -188440,7 +188592,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
      * @param center center of the polygon.
      * @param edgeCount number of edges.
      * @param radius distance to vertex or edge (see `radiusToVertices`)
-     * @param radiusToVertices true if polygon is inscribed in circle (radius measured to vertices); false if polygon is outside circle (radius to edges)
+     * @param radiusToVertices true if polygon is inscribed in circle (radius measured to vertices); false if polygon
+     * is outside circle (radius to edges)
      */
     static createRegularPolygonXY(center, edgeCount, radius, radiusToVertices = true) {
         if (edgeCount < 3)
@@ -188522,7 +188675,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         retVal.setFrom(this);
         return retVal;
     }
-    /** Set point coordinates from a json array, e.g. `[[1,2,3],[4,5,6] . . .]`
+    /**
+     * Set point coordinates from a json array, e.g. `[[1,2,3],[4,5,6] . . .]`
      * * The `json` parameter must be an array.
      * * Each member `i` of the array is converted to a point with `Point3d.fromJSON(json[i]`)
      */
@@ -188547,7 +188701,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         }
         return value;
     }
-    /** construct a new linestring.
+    /**
+     * Construct a new linestring.
      * * See `LineString3d.setFromJSON ()` for remarks on `json` structure.
      */
     static fromJSON(json) {
@@ -188637,7 +188792,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
     }
     /**
      * Convert a global fraction to a segment index and local fraction.
-     * @param globalFraction a fraction f in [0,1] in the linestring parameterization, where the i_th segment (0 <= i < N) is parameterized by i/N <= f <= (i+1)/N.
+     * @param globalFraction a fraction f in [0,1] in the linestring parameterization, where the i_th segment
+     * (0 <= i < N) is parameterized by i/N <= f <= (i+1)/N.
      */
     globalFractionToSegmentIndexAndLocalFraction(globalFraction) {
         const numSegment = this._points.length - 1;
@@ -188701,7 +188857,7 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
             return _geometry3d_Transform__WEBPACK_IMPORTED_MODULE_9__.Transform.createOriginAndMatrix(origin, matrix, result);
         return _geometry3d_Transform__WEBPACK_IMPORTED_MODULE_9__.Transform.createTranslation(origin, result);
     }
-    /** evaluate the start point of the linestring. */
+    /** Evaluate the start point of the linestring. */
     startPoint() {
         if (this._points.length === 0)
             return _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_6__.Point3d.createZero();
@@ -188713,8 +188869,7 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
             return this._points.getPoint3dAtUncheckedPointIndex(i, result);
         return undefined;
     }
-    /** If i and j are both valid indices, return the vector from point i to point j
-     */
+    /** If i and j are both valid indices, return the vector from point i to point j */
     vectorBetween(i, j, result) {
         return this._points.vectorIndexIndex(i, j, result);
     }
@@ -188731,8 +188886,10 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         return undefined;
     }
     /** Return the number of points in this linestring. */
-    numPoints() { return this._points.length; }
-    /** evaluate the end point of the linestring. */
+    numPoints() {
+        return this._points.length;
+    }
+    /** Evaluate the end point of the linestring. */
     endPoint() {
         if (this._points.length === 0)
             return _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_6__.Point3d.createZero();
@@ -188756,7 +188913,9 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         return true;
     }
     /** Sum the lengths of segments within the linestring */
-    curveLength() { return this._points.sumLengths(); }
+    curveLength() {
+        return this._points.sumLengths();
+    }
     /** Sum the lengths of segments between fractional positions on a linestring. */
     curveLengthBetweenFractions(fraction0, fraction1) {
         const numSegments = this._points.length - 1;
@@ -188855,10 +189014,10 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
             return _CurveLocationDetail__WEBPACK_IMPORTED_MODULE_12__.CurveLocationDetail.createCurveFractionPointDistanceCurveSearchStatus(this, context.fraction0, context.point0, -context.distance0, context.distanceStatus(), result);
         }
     }
-    /** sum lengths of segments in the linestring.  (This is a true length.) */
+    /** Sum lengths of segments in the linestring.  (This is a true length.) */
     quickLength() { return this.curveLength(); }
     /**
-     * compute and normalize cross product among 3 points on the linestring.
+     * Compute and normalize cross product among 3 points on the linestring.
      * * "any" 3 points are acceptable -- no test for positive overall sense.
      * * This is appropriate for polygon known to be convex.
      * * use points spread at index step n/3, hopefully avoiding colinear points.
@@ -188897,7 +189056,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
                         if (!extend1 || i < lastIndex)
                             segmentFraction = 1.0;
                     }
-                    this._points.getPoint3dAtUncheckedPointIndex(i - 1).interpolate(segmentFraction, this._points.getPoint3dAtUncheckedPointIndex(i), result.pointQ);
+                    this._points.getPoint3dAtUncheckedPointIndex(i - 1)
+                        .interpolate(segmentFraction, this._points.getPoint3dAtUncheckedPointIndex(i), result.pointQ);
                     d = result.pointQ.distance(spacePoint);
                     if (d < result.a) {
                         result.setFP(this.segmentIndexAndLocalFractionToGlobalFraction(i - 1, segmentFraction), result.pointQ, undefined, d);
@@ -188911,8 +189071,9 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
     isInPlane(plane) {
         return this._points.isCloseToPlane(plane, _Geometry__WEBPACK_IMPORTED_MODULE_2__.Geometry.smallMetricDistance);
     }
-    /** push a hit, fixing up the prior entry if needed.
-     * return the incremented counter.
+    /**
+     * Push a hit, fixing up the prior entry if needed.
+     * Return the incremented counter.
      */
     static pushVertexHit(result, counter, cp, fraction, point) {
         const detail = _CurveLocationDetail__WEBPACK_IMPORTED_MODULE_12__.CurveLocationDetail.createCurveFractionPoint(cp, fraction, point);
@@ -188929,7 +189090,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
             detail.setIntervalRole(_CurveLocationDetail__WEBPACK_IMPORTED_MODULE_12__.CurveIntervalRole.intervalEnd);
         }
     }
-    /** find intersections with a plane.
+    /**
+     * Find intersections with a plane.
      *  Intersections within segments are recorded as CurveIntervalRole.isolated
      *   Intersections at isolated "on" vertex are recoded as CurveIntervalRole.isolatedAtVertex.
      */
@@ -188966,7 +189128,9 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         return result.length - initialLength;
     }
     /** Extend `rangeToExtend` to include all points of this linestring. */
-    extendRange(rangeToExtend, transform) { this._points.extendRange(rangeToExtend, transform); }
+    extendRange(rangeToExtend, transform) {
+        this._points.extendRange(rangeToExtend, transform);
+    }
     /** Test if each point of this linestring isAlmostEqual with corresponding point in `other`. */
     isAlmostEqual(other) {
         if (!(other instanceof LineString3d))
@@ -188975,7 +189139,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
             return false;
         return true;
     }
-    /** Append (clone of) one point.
+    /**
+     * Append (clone of) one point.
      * * BUT ... skip if duplicates the tail of prior points.
      * * if fraction is given, "duplicate" considers both point and fraction.
      */
@@ -188995,8 +189160,7 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
                 this.addFraction(fraction);
         }
     }
-    /** Compress out duplicate points (according to point.isAlmostEqual)
-     */
+    /** Compress out duplicate points (according to point.isAlmostEqual) */
     removeDuplicatePoints(tolerance = _Geometry__WEBPACK_IMPORTED_MODULE_2__.Geometry.smallMetricDistance) {
         const n = this._points.length;
         if (n < 2)
@@ -189019,7 +189183,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         if (this._derivatives)
             this._derivatives.resize(n1);
     }
-    /** Append a suitable evaluation of a curve ..
+    /**
+     * Append a suitable evaluation of a curve ..
      * * always append the curve point
      * * if fraction array is present, append the fraction
      * * if derivative array is present, append the derivative
@@ -189042,7 +189207,7 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         }
     }
     /**
-     * clear all array data:
+     * Clear all array data:
      * * points
      * * optional fractions.
      * * optional derivatives.
@@ -189076,7 +189241,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         }
         return ls;
     }
-    /** Evaluate a curve at uniform fractions.  Append the evaluations to this linestring.
+    /**
+     * Evaluate a curve at uniform fractions.  Append the evaluations to this linestring.
      * @param curve primitive to evaluate.
      * @param numStrokes number of strokes (edges).
      * @param fraction0 starting fraction coordinate
@@ -189096,7 +189262,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
                 this.appendFractionToPoint(curve, fraction0 + i * df);
         }
     }
-    /** Append points constructed as interpolation between two points.
+    /**
+     * Append points constructed as interpolation between two points.
      * @param numStrokes number of strokes.
      * @param point0 first point
      * @param point1 last point
@@ -189142,7 +189309,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
             }
         }
     }
-    /** Emit strokable parts of the curve to a caller-supplied handler.
+    /**
+     * Emit strokable parts of the curve to a caller-supplied handler.
      * If the stroke options does not have a maxEdgeLength, one stroke is emitted for each segment of the linestring.
      * If the stroke options has a maxEdgeLength, smaller segments are emitted as needed.
      */
@@ -189169,7 +189337,7 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         handler.endCurvePrimitive(this);
     }
     /**
-     * return the stroke count required for given options.
+     * Return the stroke count required for given options.
      * @param options StrokeOptions that determine count
      */
     computeStrokeCountForOptions(options) {
@@ -189208,7 +189376,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
     /**
      * Find intervals of this CurvePrimitive that are interior to a clipper
      * @param clipper clip structure (e.g. clip planes)
-     * @param announce (optional) function to be called announcing fractional intervals"  ` announce(fraction0, fraction1, curvePrimitive)`
+     * @param announce (optional) function to be called announcing fractional intervals"
+     * ` announce(fraction0, fraction1, curvePrimitive)`
      * @returns true if any "in" segments are announced.
      */
     announceClipIntervals(clipper, announce) {
@@ -189252,7 +189421,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         this._points.interpolate(index, fraction, index + 1, LineString3d._indexPoint);
         dest.push(LineString3d._indexPoint);
     }
-    /** Return a LineString which is a portion of this curve.
+    /**
+     * Return a LineString which is a portion of this curve.
      * * Fractions outside [0,1] extend the relevant end segment.
      * @param fractionA [in] start fraction
      * @param fractionB [in] end fraction
@@ -189312,14 +189482,12 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
             return _LineSegment3d__WEBPACK_IMPORTED_MODULE_15__.LineSegment3d.create(this._points.getPoint3dAtCheckedPointIndex(index), this._points.getPoint3dAtCheckedPointIndex(index + 1));
         return undefined;
     }
-    /**
-     * Returns true if first and last points are within metric tolerance.
-     */
+    /** Returns true if first and last points are within metric tolerance. */
     get isPhysicallyClosed() {
         return this._points.length > 0 && _Geometry__WEBPACK_IMPORTED_MODULE_2__.Geometry.isSmallMetricDistance(this._points.distanceIndexIndex(0, this._points.length - 1));
     }
     /**
-     * evaluate strokes at fractions indicated in a StrokeCountMap.
+     * Evaluate strokes at fractions indicated in a StrokeCountMap.
      * * The map must have an array of component counts corresponding to the segment of this linestring.
      * * "fractions" in the output are mapped within a0,a1 of the map.componentData
      * @param map = stroke count data.
@@ -189356,7 +189524,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         }
         return destLinestring.numPoints() - numPoint0;
     }
-    /** convert variant point data to a single level array of linestrings.
+    /**
+     * Convert variant point data to a single level array of linestrings.
      * * The result is always an array of LineString3d.
      *   * Single linestring is NOT bubbled out as a special case.
      *   * data with no point is an empty array.
@@ -189391,7 +189560,8 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
     }
     /**
      * Construct an offset of each segment as viewed in the xy-plane (ignoring z).
-     * * No attempt is made to join the offset segments. Use RegionOps.constructCurveXYOffset() to return a fully joined offset.
+     * * No attempt is made to join the offset segments. Use RegionOps.constructCurveXYOffset() to return a fully
+     * joined offset.
      * @param offsetDistanceOrOptions offset distance (positive to left of the instance curve), or options object
      */
     constructOffsetXY(offsetDistanceOrOptions) {
@@ -189408,10 +189578,13 @@ class LineString3d extends _CurvePrimitive__WEBPACK_IMPORTED_MODULE_0__.CurvePri
         }
         return offsets;
     }
-    /** Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters of projection.
+    /**
+     * Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters
+     * of projection.
      * @param ray ray onto which the instance is projected. A `Vector3d` is treated as a `Ray3d` with zero origin.
      * @param lowHigh optional receiver for output
-     * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is the end of the ray.
+     * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is
+     * the end of the ray.
      */
     projectedParameterRange(ray, lowHigh) {
         return _internalContexts_PlaneAltitudeRangeContext__WEBPACK_IMPORTED_MODULE_18__.PlaneAltitudeRangeContext.findExtremeFractionsAlongDirection(this, ray, lowHigh);
@@ -189423,14 +189596,15 @@ LineString3d._workPointC = _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_
 LineString3d._workRay = _geometry3d_Ray3d__WEBPACK_IMPORTED_MODULE_7__.Ray3d.createXAxis();
 LineString3d._indexPoint = _geometry3d_Point3dVector3d__WEBPACK_IMPORTED_MODULE_6__.Point3d.create(); // private point for addResolvedPoint
 
-/** An AnnotatedLineString3d is a linestring with additional surface-related data attached to each point
+/**
+ * An AnnotatedLineString3d is a linestring with additional surface-related data attached to each point
  * * This is useful in facet construction.
  * @internal
  */
 class AnnotatedLineString3d {
 }
 /**
- * context to be called to incrementally accumulate distance along line segments.
+ * Context to be called to incrementally accumulate distance along line segments.
  */
 class MoveByDistanceContext {
     /** CAPTURE point0, fraction0, targetDistance */
@@ -191425,15 +191599,15 @@ __webpack_require__.r(__webpack_exports__);
  */
 
 /**
- * data carrier interface for per-primitive stroke counts and distances used by PolyfaceBuilder.
- * * For a simple primitive (Line segment or arc) that is stroked with uniform fraction, the members are:
+ * Data carrier interface for per-primitive stroke counts and distances used by PolyfaceBuilder.
+ * * For a simple primitive (line segment or arc) that is stroked with uniform fraction, the members are:
  *   * `numStroke` = total number of strokes
  *   * `curveLength` = length of this curve
  *   * `a0` = external mapped coordinate for fraction 0 on this primitive or component
  *   * `a1` = external mapped coordinate for fraction 1 on this primitive or component
  *
  * * For linestring and bspline curve, those numbers are totals for the overall curve, and breakdown within
- *     the components (line segments or bezier spans) is recorded on the optional array `componentData[]`
+ * the components (line segments or bezier spans) is recorded on the optional array `componentData[]`
  *   * Members of the array are annotated with componentIndex within the linestring or bspline curve
  * @public
  */
@@ -191483,7 +191657,7 @@ class StrokeCountMap {
         return result;
     }
     /**
-     * create a StrokeCountMap, optionally
+     * Create a StrokeCountMap, optionally
      * * (a) use parent a1 as new a0
      * * (b) attach a (usually empty) array for component counts.
      * @param parentMap optional map whose a1 becomes a0 in the new map.
@@ -191511,8 +191685,9 @@ class StrokeCountMap {
         this.curveLength += curveLength;
         this.a1 = a2;
     }
-    /** return true if `other` has the same component structure as `this`
-     * * testing recurses through corresponding members of componentData arrays.
+    /**
+     * Return true if `other` has the same component structure as `this`
+     * * Testing recurses through corresponding members of componentData arrays.
      */
     isCompatibleComponentStructure(other, enforceCounts) {
         if (enforceCounts && this.numStroke !== other.numStroke)
@@ -191533,7 +191708,7 @@ class StrokeCountMap {
         return false;
     }
     /**
-     * * clone all data from root.
+     * Clone all data from root.
      * * clone componentData arrays recursively.
      */
     clone() {
@@ -191546,7 +191721,7 @@ class StrokeCountMap {
         return a;
     }
     /**
-     * interpolate in the a0,a1 mapping.
+     * Interpolate in the a0,a1 mapping.
      * @param fraction fractional position between a0 and a1
      */
     fractionToA(fraction) {
@@ -193223,7 +193398,8 @@ __webpack_require__.r(__webpack_exports__);
 
 
 /* eslint-disable @typescript-eslint/naming-convention, no-empty */
-/** tolerance blob for various stroking methods.
+/**
+ * Tolerance blob for various stroking methods.
  *
  * * Across many applications, the critical concepts are:   chordTol, angleTol, maxEdgeLength
  * * Chord error is an distance measured from a curve or facet to its approximating stroke or facet.
@@ -193246,26 +193422,40 @@ __webpack_require__.r(__webpack_exports__);
  */
 class StrokeOptions {
     constructor() {
-        /** whether or not to triangulate each added facet */
+        /** Whether or not to triangulate each added facet */
         this.shouldTriangulate = false;
-        /** default number of strokes for a circle. */
+        /** Default number of strokes for a circle. */
         this.defaultCircleStrokes = 16;
     }
     /** Whether params are requested. */
-    get needParams() { return this._needParams !== undefined ? this._needParams : false; }
-    set needParams(value) { this._needParams = value; }
+    get needParams() {
+        return this._needParams !== undefined ? this._needParams : false;
+    }
+    set needParams(value) {
+        this._needParams = value;
+    }
     /** Whether normals are requested */
-    get needNormals() { return this._needNormals !== undefined ? this._needNormals : false; }
+    get needNormals() {
+        return this._needNormals !== undefined ? this._needNormals : false;
+    }
     set needNormals(value) { this._needNormals = value; }
     /** Whether twoSided is requested. */
-    get needTwoSided() { return this._needTwoSided !== undefined ? this._needTwoSided : false; }
+    get needTwoSided() {
+        return this._needTwoSided !== undefined ? this._needTwoSided : false;
+    }
     set needTwoSided(value) { this._needTwoSided = value; }
-    /** ask if angleTol is specified */
-    get hasAngleTol() { return this.angleTol !== undefined && Math.abs(this.angleTol.radians) > 0.0; }
-    /** ask if chordTol is specified */
-    get hasChordTol() { return this.chordTol !== undefined && this.chordTol > 0.0; }
-    /** ask if maxEdgeLength is specified */
-    get hasMaxEdgeLength() { return this.maxEdgeLength !== undefined && this.maxEdgeLength > 0.0; }
+    /** Ask if angleTol is specified */
+    get hasAngleTol() {
+        return this.angleTol !== undefined && Math.abs(this.angleTol.radians) > 0.0;
+    }
+    /** Ask if chordTol is specified */
+    get hasChordTol() {
+        return this.chordTol !== undefined && this.chordTol > 0.0;
+    }
+    /** Ask if maxEdgeLength is specified */
+    get hasMaxEdgeLength() {
+        return this.maxEdgeLength !== undefined && this.maxEdgeLength > 0.0;
+    }
     /** Return a deep clone  */
     clone() {
         const options = new StrokeOptions();
@@ -193282,7 +193472,7 @@ class StrokeOptions {
         options.defaultCircleStrokes = this.defaultCircleStrokes;
         return options;
     }
-    /** return stroke count which is the larger of the minCount or count needed for edge length condition. */
+    /** Return stroke count which is the larger of the minCount or count needed for edge length condition. */
     applyMaxEdgeLength(minCount, totalLength) {
         totalLength = Math.abs(totalLength);
         if (this.maxEdgeLength && this.maxEdgeLength > 0.0 && minCount * this.maxEdgeLength < totalLength) {
@@ -193291,14 +193481,16 @@ class StrokeOptions {
         return minCount;
     }
     /**
-     * return stroke count which is the larger of the existing count or count needed for angle condition for given sweepRadians
+     * Return stroke count which is the larger of the existing count or count needed for angle condition for given
+     * sweepRadians.
      * * defaultStepRadians is assumed to be larger than zero.
      */
     applyAngleTol(minCount, sweepRadians, defaultStepRadians) {
         return StrokeOptions.applyAngleTol(this, minCount, sweepRadians, defaultStepRadians);
     }
     /**
-     * return stroke count which is the larger of minCount and the count required to turn sweepRadians, using tolerance from the options.
+     * Return stroke count which is the larger of minCount and the count required to turn sweepRadians, using tolerance
+     * from the options.
      */
     static applyAngleTol(options, minCount, sweepRadians, defaultStepRadians) {
         sweepRadians = Math.abs(sweepRadians);
@@ -193326,7 +193518,8 @@ class StrokeOptions {
         return minCount;
     }
     /**
-     * Determine a stroke count for a (partial) circular arc of given radius. This considers angle, maxEdgeLength, chord, and minimum stroke.
+     * Determine a stroke count for a (partial) circular arc of given radius. This considers angle, maxEdgeLength,
+     * chord, and minimum stroke.
      */
     applyTolerancesToArc(radius, sweepRadians = Math.PI * 2) {
         let numStrokes = 1;
@@ -193336,7 +193529,7 @@ class StrokeOptions {
         numStrokes = this.applyMinStrokesPerPrimitive(numStrokes);
         return numStrokes;
     }
-    /** return stroke count which is the larger of existing count or count needed for circular arc chord tolerance condition. */
+    /** Return stroke count which is the larger of existing count or count needed for circular arc chord tolerance condition. */
     applyChordTol(minCount, radius, sweepRadians) {
         if (this.chordTol && this.chordTol > 0.0 && this.chordTol < radius) {
             const a = this.chordTol;
@@ -193345,7 +193538,9 @@ class StrokeOptions {
         }
         return minCount;
     }
-    /** return stroke count which is the larger of existing count or count needed for circular arc chord tol with given arc length and radians
+    /**
+     * Return stroke count which is the larger of existing count or count needed for circular arc chord tol with given
+     * arc length and radians
      */
     applyChordTolToLengthAndRadians(minCount, length, sweepRadians) {
         if (this.chordTol && this.chordTol > 0.0) {
@@ -193355,14 +193550,15 @@ class StrokeOptions {
         }
         return minCount;
     }
-    /** return stroke count which is the larger of existing count or `this.minStrokesPerPrimitive` */
+    /** Return stroke count which is the larger of existing count or `this.minStrokesPerPrimitive` */
     applyMinStrokesPerPrimitive(minCount) {
         if (this.minStrokesPerPrimitive !== undefined && Number.isFinite(this.minStrokesPerPrimitive)
             && this.minStrokesPerPrimitive > minCount)
             minCount = this.minStrokesPerPrimitive;
         return minCount;
     }
-    /** create `StrokeOptions` with defaults appropriate for curves.
+    /**
+     * Create `StrokeOptions` with defaults appropriate for curves.
      * * angle tolerance of 15 degrees.
      * * all others inactive.
      */
@@ -193371,7 +193567,8 @@ class StrokeOptions {
         options.angleTol = _geometry3d_Angle__WEBPACK_IMPORTED_MODULE_1__.Angle.createDegrees(15.0);
         return options;
     }
-    /** create `StrokeOptions` with defaults appropriate for surfaces facets
+    /**
+     * Create `StrokeOptions` with defaults appropriate for surfaces facets
      * * angle tolerance of 22.5 degrees.
      * * all others inactive.
      */
@@ -205414,8 +205611,8 @@ class Matrix3d {
     }
     /**
      * Create a matrix from column vectors, shuffled into place per axisOrder
-     * For example, if axisOrder = XYZ then it returns [vectorU, vectorV, vectorW]
-     * Another example, if axisOrder = YZX then it returns [vectorW, vectorU, vectorV] because
+     * * For example, if axisOrder = XYZ then it returns [vectorU, vectorV, vectorW]
+     * * Another example, if axisOrder = YZX then it returns [vectorW, vectorU, vectorV] because
      * Y is at index 0 so vectorU goes to the column Y (column 2), Z is at index 1 so vectorV goes
      * to the column Z (column 3), and X is at index 2 so vectorW goes to the column X (column 1)
      */
@@ -274798,7 +274995,7 @@ class TestContext {
         this.initializeRpcInterfaces({ title: this.settings.Backend.name, version: this.settings.Backend.version });
         const iModelClient = new imodels_client_management_1.IModelsClient({ api: { baseUrl: `https://${process.env.IMJS_URL_PREFIX ?? ""}api.bentley.com/imodels` } });
         await core_frontend_1.NoRenderApp.startup({
-            applicationVersion: "4.1.0-dev.4",
+            applicationVersion: "4.1.0-dev.6",
             applicationId: this.settings.gprid,
             authorizationClient: new frontend_1.TestFrontendAuthorizationClient(this.adminUserAccessToken),
             hubAccess: new imodels_access_frontend_1.FrontendIModelsAccess(iModelClient),
@@ -283879,9 +284076,9 @@ __webpack_require__.r(__webpack_exports__);
 /* harmony export */   "DialogProperty": () => (/* reexport safe */ _appui_abstract_dialogs_DialogItem__WEBPACK_IMPORTED_MODULE_4__.DialogProperty),
 /* harmony export */   "DisplayMessageType": () => (/* reexport safe */ _appui_abstract_notification_MessagePresenter__WEBPACK_IMPORTED_MODULE_14__.DisplayMessageType),
 /* harmony export */   "FunctionKey": () => (/* reexport safe */ _appui_abstract_common_KeyboardKey__WEBPACK_IMPORTED_MODULE_1__.FunctionKey),
-/* harmony export */   "FuzzyScore": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.FuzzyScore),
+/* harmony export */   "FuzzyScore": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.FuzzyScore),
 /* harmony export */   "GenericUiEvent": () => (/* reexport safe */ _appui_abstract_UiAdmin__WEBPACK_IMPORTED_MODULE_0__.GenericUiEvent),
-/* harmony export */   "IconSpecUtilities": () => (/* reexport safe */ _appui_abstract_utils_IconSpecUtilities__WEBPACK_IMPORTED_MODULE_28__.IconSpecUtilities),
+/* harmony export */   "IconSpecUtilities": () => (/* reexport safe */ _appui_abstract_utils_IconSpecUtilities__WEBPACK_IMPORTED_MODULE_27__.IconSpecUtilities),
 /* harmony export */   "MessageSeverity": () => (/* reexport safe */ _appui_abstract_notification_MessageSeverity__WEBPACK_IMPORTED_MODULE_15__.MessageSeverity),
 /* harmony export */   "PropertyChangeStatus": () => (/* reexport safe */ _appui_abstract_dialogs_UiDataProvider__WEBPACK_IMPORTED_MODULE_6__.PropertyChangeStatus),
 /* harmony export */   "PropertyDescriptionHelper": () => (/* reexport safe */ _appui_abstract_properties_Description__WEBPACK_IMPORTED_MODULE_16__.PropertyDescriptionHelper),
@@ -283898,17 +284095,17 @@ __webpack_require__.r(__webpack_exports__);
 /* harmony export */   "ToolbarItemUtilities": () => (/* reexport safe */ _appui_abstract_toolbars_ToolbarItem__WEBPACK_IMPORTED_MODULE_24__.ToolbarItemUtilities),
 /* harmony export */   "UiAdmin": () => (/* reexport safe */ _appui_abstract_UiAdmin__WEBPACK_IMPORTED_MODULE_0__.UiAdmin),
 /* harmony export */   "UiDataProvider": () => (/* reexport safe */ _appui_abstract_dialogs_UiDataProvider__WEBPACK_IMPORTED_MODULE_6__.UiDataProvider),
-/* harmony export */   "UiError": () => (/* reexport safe */ _appui_abstract_utils_UiError__WEBPACK_IMPORTED_MODULE_30__.UiError),
-/* harmony export */   "UiEvent": () => (/* reexport safe */ _appui_abstract_utils_UiEvent__WEBPACK_IMPORTED_MODULE_32__.UiEvent),
-/* harmony export */   "UiEventDispatcher": () => (/* reexport safe */ _appui_abstract_utils_UiEventDispatcher__WEBPACK_IMPORTED_MODULE_31__.UiEventDispatcher),
+/* harmony export */   "UiError": () => (/* reexport safe */ _appui_abstract_utils_UiError__WEBPACK_IMPORTED_MODULE_29__.UiError),
+/* harmony export */   "UiEvent": () => (/* reexport safe */ _appui_abstract_utils_UiEvent__WEBPACK_IMPORTED_MODULE_31__.UiEvent),
+/* harmony export */   "UiEventDispatcher": () => (/* reexport safe */ _appui_abstract_utils_UiEventDispatcher__WEBPACK_IMPORTED_MODULE_30__.UiEventDispatcher),
 /* harmony export */   "UiLayoutDataProvider": () => (/* reexport safe */ _appui_abstract_dialogs_UiLayoutDataProvider__WEBPACK_IMPORTED_MODULE_5__.UiLayoutDataProvider),
-/* harmony export */   "UiSyncEvent": () => (/* reexport safe */ _appui_abstract_utils_UiEventDispatcher__WEBPACK_IMPORTED_MODULE_31__.UiSyncEvent),
-/* harmony export */   "convertSimple2RegExpPattern": () => (/* reexport safe */ _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_35__.convertSimple2RegExpPattern),
-/* harmony export */   "createMatches": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.createMatches),
-/* harmony export */   "equalsIgnoreCase": () => (/* reexport safe */ _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_35__.equalsIgnoreCase),
-/* harmony export */   "fuzzyScore": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.fuzzyScore),
-/* harmony export */   "fuzzyScoreGraceful": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.fuzzyScoreGraceful),
-/* harmony export */   "fuzzyScoreGracefulAggressive": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.fuzzyScoreGracefulAggressive),
+/* harmony export */   "UiSyncEvent": () => (/* reexport safe */ _appui_abstract_utils_UiEventDispatcher__WEBPACK_IMPORTED_MODULE_30__.UiSyncEvent),
+/* harmony export */   "convertSimple2RegExpPattern": () => (/* reexport safe */ _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_34__.convertSimple2RegExpPattern),
+/* harmony export */   "createMatches": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.createMatches),
+/* harmony export */   "equalsIgnoreCase": () => (/* reexport safe */ _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_34__.equalsIgnoreCase),
+/* harmony export */   "fuzzyScore": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.fuzzyScore),
+/* harmony export */   "fuzzyScoreGraceful": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.fuzzyScoreGraceful),
+/* harmony export */   "fuzzyScoreGracefulAggressive": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.fuzzyScoreGracefulAggressive),
 /* harmony export */   "getClassName": () => (/* reexport safe */ _appui_abstract_utils_misc__WEBPACK_IMPORTED_MODULE_26__.getClassName),
 /* harmony export */   "isArrowKey": () => (/* reexport safe */ _appui_abstract_common_KeyboardKey__WEBPACK_IMPORTED_MODULE_1__.isArrowKey),
 /* harmony export */   "isButtonGroupEditorParams": () => (/* reexport safe */ _appui_abstract_properties_EditorParams__WEBPACK_IMPORTED_MODULE_17__.isButtonGroupEditorParams),
@@ -283916,22 +284113,21 @@ __webpack_require__.r(__webpack_exports__);
 /* harmony export */   "isCustomFormattedNumberParams": () => (/* reexport safe */ _appui_abstract_properties_EditorParams__WEBPACK_IMPORTED_MODULE_17__.isCustomFormattedNumberParams),
 /* harmony export */   "isIconListEditorParams": () => (/* reexport safe */ _appui_abstract_properties_EditorParams__WEBPACK_IMPORTED_MODULE_17__.isIconListEditorParams),
 /* harmony export */   "isInputEditorSizeParams": () => (/* reexport safe */ _appui_abstract_properties_EditorParams__WEBPACK_IMPORTED_MODULE_17__.isInputEditorSizeParams),
-/* harmony export */   "isLetter": () => (/* reexport safe */ _appui_abstract_utils_isLetter__WEBPACK_IMPORTED_MODULE_27__.isLetter),
-/* harmony export */   "isLowerAsciiLetter": () => (/* reexport safe */ _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_35__.isLowerAsciiLetter),
-/* harmony export */   "isPatternInWord": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.isPatternInWord),
+/* harmony export */   "isLowerAsciiLetter": () => (/* reexport safe */ _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_34__.isLowerAsciiLetter),
+/* harmony export */   "isPatternInWord": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.isPatternInWord),
 /* harmony export */   "isSuppressLabelEditorParams": () => (/* reexport safe */ _appui_abstract_properties_EditorParams__WEBPACK_IMPORTED_MODULE_17__.isSuppressLabelEditorParams),
-/* harmony export */   "isUpperAsciiLetter": () => (/* reexport safe */ _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_35__.isUpperAsciiLetter),
+/* harmony export */   "isUpperAsciiLetter": () => (/* reexport safe */ _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_34__.isUpperAsciiLetter),
 /* harmony export */   "loggerCategory": () => (/* reexport safe */ _appui_abstract_utils_misc__WEBPACK_IMPORTED_MODULE_26__.loggerCategory),
-/* harmony export */   "matchesCamelCase": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.matchesCamelCase),
-/* harmony export */   "matchesContiguousSubString": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.matchesContiguousSubString),
-/* harmony export */   "matchesFuzzy": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.matchesFuzzy),
-/* harmony export */   "matchesFuzzy2": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.matchesFuzzy2),
-/* harmony export */   "matchesPrefix": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.matchesPrefix),
-/* harmony export */   "matchesStrictPrefix": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.matchesStrictPrefix),
-/* harmony export */   "matchesSubString": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.matchesSubString),
-/* harmony export */   "matchesWords": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.matchesWords),
-/* harmony export */   "or": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__.or),
-/* harmony export */   "startsWithIgnoreCase": () => (/* reexport safe */ _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_35__.startsWithIgnoreCase)
+/* harmony export */   "matchesCamelCase": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.matchesCamelCase),
+/* harmony export */   "matchesContiguousSubString": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.matchesContiguousSubString),
+/* harmony export */   "matchesFuzzy": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.matchesFuzzy),
+/* harmony export */   "matchesFuzzy2": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.matchesFuzzy2),
+/* harmony export */   "matchesPrefix": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.matchesPrefix),
+/* harmony export */   "matchesStrictPrefix": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.matchesStrictPrefix),
+/* harmony export */   "matchesSubString": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.matchesSubString),
+/* harmony export */   "matchesWords": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.matchesWords),
+/* harmony export */   "or": () => (/* reexport safe */ _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__.or),
+/* harmony export */   "startsWithIgnoreCase": () => (/* reexport safe */ _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_34__.startsWithIgnoreCase)
 /* harmony export */ });
 /* harmony import */ var _appui_abstract_UiAdmin__WEBPACK_IMPORTED_MODULE_0__ = __webpack_require__(/*! ./appui-abstract/UiAdmin */ "../../ui/appui-abstract/lib/esm/appui-abstract/UiAdmin.js");
 /* harmony import */ var _appui_abstract_common_KeyboardKey__WEBPACK_IMPORTED_MODULE_1__ = __webpack_require__(/*! ./appui-abstract/common/KeyboardKey */ "../../ui/appui-abstract/lib/esm/appui-abstract/common/KeyboardKey.js");
@@ -283960,15 +284156,14 @@ __webpack_require__.r(__webpack_exports__);
 /* harmony import */ var _appui_abstract_toolbars_ToolbarItem__WEBPACK_IMPORTED_MODULE_24__ = __webpack_require__(/*! ./appui-abstract/toolbars/ToolbarItem */ "../../ui/appui-abstract/lib/esm/appui-abstract/toolbars/ToolbarItem.js");
 /* harmony import */ var _appui_abstract_utils_callbacks__WEBPACK_IMPORTED_MODULE_25__ = __webpack_require__(/*! ./appui-abstract/utils/callbacks */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/callbacks.js");
 /* harmony import */ var _appui_abstract_utils_misc__WEBPACK_IMPORTED_MODULE_26__ = __webpack_require__(/*! ./appui-abstract/utils/misc */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/misc.js");
-/* harmony import */ var _appui_abstract_utils_isLetter__WEBPACK_IMPORTED_MODULE_27__ = __webpack_require__(/*! ./appui-abstract/utils/isLetter */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/isLetter.js");
-/* harmony import */ var _appui_abstract_utils_IconSpecUtilities__WEBPACK_IMPORTED_MODULE_28__ = __webpack_require__(/*! ./appui-abstract/utils/IconSpecUtilities */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/IconSpecUtilities.js");
-/* harmony import */ var _appui_abstract_utils_PointProps__WEBPACK_IMPORTED_MODULE_29__ = __webpack_require__(/*! ./appui-abstract/utils/PointProps */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/PointProps.js");
-/* harmony import */ var _appui_abstract_utils_UiError__WEBPACK_IMPORTED_MODULE_30__ = __webpack_require__(/*! ./appui-abstract/utils/UiError */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/UiError.js");
-/* harmony import */ var _appui_abstract_utils_UiEventDispatcher__WEBPACK_IMPORTED_MODULE_31__ = __webpack_require__(/*! ./appui-abstract/utils/UiEventDispatcher */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/UiEventDispatcher.js");
-/* harmony import */ var _appui_abstract_utils_UiEvent__WEBPACK_IMPORTED_MODULE_32__ = __webpack_require__(/*! ./appui-abstract/utils/UiEvent */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/UiEvent.js");
-/* harmony import */ var _appui_abstract_utils_filter_charCode__WEBPACK_IMPORTED_MODULE_33__ = __webpack_require__(/*! ./appui-abstract/utils/filter/charCode */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/filter/charCode.js");
-/* harmony import */ var _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_34__ = __webpack_require__(/*! ./appui-abstract/utils/filter/filters */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/filter/filters.js");
-/* harmony import */ var _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_35__ = __webpack_require__(/*! ./appui-abstract/utils/filter/strings */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/filter/strings.js");
+/* harmony import */ var _appui_abstract_utils_IconSpecUtilities__WEBPACK_IMPORTED_MODULE_27__ = __webpack_require__(/*! ./appui-abstract/utils/IconSpecUtilities */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/IconSpecUtilities.js");
+/* harmony import */ var _appui_abstract_utils_PointProps__WEBPACK_IMPORTED_MODULE_28__ = __webpack_require__(/*! ./appui-abstract/utils/PointProps */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/PointProps.js");
+/* harmony import */ var _appui_abstract_utils_UiError__WEBPACK_IMPORTED_MODULE_29__ = __webpack_require__(/*! ./appui-abstract/utils/UiError */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/UiError.js");
+/* harmony import */ var _appui_abstract_utils_UiEventDispatcher__WEBPACK_IMPORTED_MODULE_30__ = __webpack_require__(/*! ./appui-abstract/utils/UiEventDispatcher */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/UiEventDispatcher.js");
+/* harmony import */ var _appui_abstract_utils_UiEvent__WEBPACK_IMPORTED_MODULE_31__ = __webpack_require__(/*! ./appui-abstract/utils/UiEvent */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/UiEvent.js");
+/* harmony import */ var _appui_abstract_utils_filter_charCode__WEBPACK_IMPORTED_MODULE_32__ = __webpack_require__(/*! ./appui-abstract/utils/filter/charCode */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/filter/charCode.js");
+/* harmony import */ var _appui_abstract_utils_filter_filters__WEBPACK_IMPORTED_MODULE_33__ = __webpack_require__(/*! ./appui-abstract/utils/filter/filters */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/filter/filters.js");
+/* harmony import */ var _appui_abstract_utils_filter_strings__WEBPACK_IMPORTED_MODULE_34__ = __webpack_require__(/*! ./appui-abstract/utils/filter/strings */ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/filter/strings.js");
 /*---------------------------------------------------------------------------------------------
 * Copyright (c) Bentley Systems, Incorporated. All rights reserved.
 * See LICENSE.md in the project root for license terms and full copyright notice.
@@ -284006,7 +284201,6 @@ __webpack_require__.r(__webpack_exports__);
 
 
 
-
 
 
 /** @docs-package-description
@@ -287435,36 +287629,6 @@ function startsWithIgnoreCase(str, candidate) {
 }
 
 
-/***/ }),
-
-/***/ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/isLetter.js":
-/*!************************************************************************!*\
-  !*** ../../ui/appui-abstract/lib/esm/appui-abstract/utils/isLetter.js ***!
-  \************************************************************************/
-/***/ ((__unused_webpack_module, __webpack_exports__, __webpack_require__) => {
-
-"use strict";
-__webpack_require__.r(__webpack_exports__);
-/* harmony export */ __webpack_require__.d(__webpack_exports__, {
-/* harmony export */   "isLetter": () => (/* binding */ isLetter)
-/* harmony export */ });
-/*---------------------------------------------------------------------------------------------
-* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
-* See LICENSE.md in the project root for license terms and full copyright notice.
-*--------------------------------------------------------------------------------------------*/
-/** @packageDocumentation
- * @module Utilities
- */
-/** Uses ECMAScript case transformation (toLowerCase() and toUpperCase()) to check whether or not a given character is a letter.
- * Beyond the English alphabet, this solution will also work for most Greek, Armenian, Cyrillic, and Latin characters.
- * But, it will not work for Chinese or Japanese characters since those languages do not have uppercase and lowercase letters.
- * @alpha
- */
-function isLetter(char) {
-    return char.length === 1 && char.toLowerCase() !== char.toUpperCase();
-}
-
-
 /***/ }),
 
 /***/ "../../ui/appui-abstract/lib/esm/appui-abstract/utils/misc.js":
@@ -292856,7 +293020,7 @@ module.exports = JSON.parse('{"name":"axios","version":"0.21.4","description":"P
 /***/ ((module) => {
 
 "use strict";
-module.exports = JSON.parse('{"name":"@itwin/core-frontend","version":"4.1.0-dev.4","description":"iTwin.js frontend components","main":"lib/cjs/core-frontend.js","module":"lib/esm/core-frontend.js","typings":"lib/cjs/core-frontend","license":"MIT","scripts":{"build":"npm run -s copy:public && npm run -s build:cjs && npm run -s build:esm","build:cjs":"npm run -s copy:js:cjs && tsc 1>&2 --outDir lib/cjs","build:esm":"npm run -s copy:js:esm && tsc 1>&2 --module ES2020 --outDir lib/esm","clean":"rimraf lib .rush/temp/package-deps*.json","copy:public":"cpx \\"./src/public/**/*\\" ./lib/public","copy:js:cjs":"cpx \\"./src/**/*.js\\" ./lib/cjs","copy:js:esm":"cpx \\"./src/**/*.js\\" ./lib/esm","docs":"betools docs --includes=../../generated-docs/extract --json=../../generated-docs/core/core-frontend/file.json --tsIndexFile=./core-frontend.ts --onlyJson --excludes=webgl/**/*,**/primitives,**/map/*.d.ts,**/tile/*.d.ts,**/*-css.ts","extract-api":"betools extract-api --entry=core-frontend && npm run extract-extension-api","extract-extension-api":"eslint --no-eslintrc -c \\"./node_modules/@itwin/eslint-plugin/dist/configs/extension-exports-config.js\\" \\"./src/**/*.ts\\" 1>&2","lint":"eslint -f visualstudio \\"./src/**/*.ts\\" 1>&2","pseudolocalize":"betools pseudolocalize --englishDir ./src/public/locales/en --out ./public/locales/en-PSEUDO","test":"npm run -s webpackTests && certa -r chrome","cover":"npm -s test","test:debug":"certa -r chrome --debug","webpackTests":"webpack --config ./src/test/utils/webpack.config.js 1>&2"},"repository":{"type":"git","url":"https://github.com/iTwin/itwinjs-core.git","directory":"core/frontend"},"keywords":["Bentley","BIM","iModel","digital-twin","iTwin"],"author":{"name":"Bentley Systems, Inc.","url":"http://www.bentley.com"},"peerDependencies":{"@itwin/appui-abstract":"workspace:^4.1.0-dev.4","@itwin/core-bentley":"workspace:^4.1.0-dev.4","@itwin/core-common":"workspace:^4.1.0-dev.4","@itwin/core-geometry":"workspace:^4.1.0-dev.4","@itwin/core-orbitgt":"workspace:^4.1.0-dev.4","@itwin/core-quantity":"workspace:^4.1.0-dev.4"},"//devDependencies":["NOTE: All peerDependencies should also be listed as devDependencies since peerDependencies are not considered by npm install","NOTE: All tools used by scripts in this package must be listed as devDependencies"],"devDependencies":{"@itwin/appui-abstract":"workspace:*","@itwin/build-tools":"workspace:*","@itwin/core-bentley":"workspace:*","@itwin/core-common":"workspace:*","@itwin/core-geometry":"workspace:*","@itwin/core-orbitgt":"workspace:*","@itwin/core-quantity":"workspace:*","@itwin/certa":"workspace:*","@itwin/eslint-plugin":"^4.0.0-dev.33","@types/chai":"4.3.1","@types/chai-as-promised":"^7","@types/mocha":"^8.2.2","@types/node":"^18.11.5","@types/sinon":"^9.0.0","babel-loader":"~8.2.5","babel-plugin-istanbul":"~6.1.1","chai":"^4.1.2","chai-as-promised":"^7","cpx2":"^3.0.0","eslint":"^8.36.0","glob":"^7.1.2","mocha":"^10.0.0","nyc":"^15.1.0","rimraf":"^3.0.2","sinon":"^9.0.2","source-map-loader":"^4.0.0","typescript":"~5.0.2","webpack":"^5.76.0"},"//dependencies":["NOTE: these dependencies should be only for things that DO NOT APPEAR IN THE API","NOTE: core-frontend should remain UI technology agnostic, so no react/angular dependencies are allowed"],"dependencies":{"@itwin/object-storage-azure":"^1.5.0","@itwin/cloud-agnostic-core":"^1.5.0","@itwin/object-storage-core":"^1.5.0","@itwin/core-i18n":"workspace:*","@itwin/core-telemetry":"workspace:*","@itwin/webgl-compatibility":"workspace:*","@loaders.gl/core":"^3.1.6","@loaders.gl/draco":"^3.1.6","fuse.js":"^3.3.0","wms-capabilities":"0.4.0","reflect-metadata":"0.1.13"},"nyc":{"extends":"./node_modules/@itwin/build-tools/.nycrc"},"eslintConfig":{"plugins":["@itwin"],"extends":"plugin:@itwin/itwinjs-recommended","rules":{"@itwin/no-internal-barrel-imports":["error",{"required-barrel-modules":["./src/tile/internal.ts"]}],"@itwin/public-extension-exports":["error",{"releaseTags":["public","preview"],"outputApiFile":false}]},"overrides":[{"files":["*.test.ts","*.test.tsx","**/test/**/*.ts"],"rules":{"@itwin/no-internal-barrel-imports":"off"}}]}}');
+module.exports = JSON.parse('{"name":"@itwin/core-frontend","version":"4.1.0-dev.6","description":"iTwin.js frontend components","main":"lib/cjs/core-frontend.js","module":"lib/esm/core-frontend.js","typings":"lib/cjs/core-frontend","license":"MIT","scripts":{"build":"npm run -s copy:public && npm run -s build:cjs && npm run -s build:esm","build:cjs":"npm run -s copy:js:cjs && tsc 1>&2 --outDir lib/cjs","build:esm":"npm run -s copy:js:esm && tsc 1>&2 --module ES2020 --outDir lib/esm","clean":"rimraf lib .rush/temp/package-deps*.json","copy:public":"cpx \\"./src/public/**/*\\" ./lib/public","copy:js:cjs":"cpx \\"./src/**/*.js\\" ./lib/cjs","copy:js:esm":"cpx \\"./src/**/*.js\\" ./lib/esm","docs":"betools docs --includes=../../generated-docs/extract --json=../../generated-docs/core/core-frontend/file.json --tsIndexFile=./core-frontend.ts --onlyJson --excludes=webgl/**/*,**/primitives,**/map/*.d.ts,**/tile/*.d.ts,**/*-css.ts","extract-api":"betools extract-api --entry=core-frontend && npm run extract-extension-api","extract-extension-api":"eslint --no-eslintrc -c \\"./node_modules/@itwin/eslint-plugin/dist/configs/extension-exports-config.js\\" \\"./src/**/*.ts\\" 1>&2","lint":"eslint -f visualstudio \\"./src/**/*.ts\\" 1>&2","pseudolocalize":"betools pseudolocalize --englishDir ./src/public/locales/en --out ./public/locales/en-PSEUDO","test":"npm run -s webpackTests && certa -r chrome","cover":"npm -s test","test:debug":"certa -r chrome --debug","webpackTests":"webpack --config ./src/test/utils/webpack.config.js 1>&2"},"repository":{"type":"git","url":"https://github.com/iTwin/itwinjs-core.git","directory":"core/frontend"},"keywords":["Bentley","BIM","iModel","digital-twin","iTwin"],"author":{"name":"Bentley Systems, Inc.","url":"http://www.bentley.com"},"peerDependencies":{"@itwin/appui-abstract":"workspace:^4.1.0-dev.6","@itwin/core-bentley":"workspace:^4.1.0-dev.6","@itwin/core-common":"workspace:^4.1.0-dev.6","@itwin/core-geometry":"workspace:^4.1.0-dev.6","@itwin/core-orbitgt":"workspace:^4.1.0-dev.6","@itwin/core-quantity":"workspace:^4.1.0-dev.6"},"//devDependencies":["NOTE: All peerDependencies should also be listed as devDependencies since peerDependencies are not considered by npm install","NOTE: All tools used by scripts in this package must be listed as devDependencies"],"devDependencies":{"@itwin/appui-abstract":"workspace:*","@itwin/build-tools":"workspace:*","@itwin/core-bentley":"workspace:*","@itwin/core-common":"workspace:*","@itwin/core-geometry":"workspace:*","@itwin/core-orbitgt":"workspace:*","@itwin/core-quantity":"workspace:*","@itwin/certa":"workspace:*","@itwin/eslint-plugin":"^4.0.0-dev.33","@types/chai":"4.3.1","@types/chai-as-promised":"^7","@types/mocha":"^8.2.2","@types/node":"^18.11.5","@types/sinon":"^9.0.0","babel-loader":"~8.2.5","babel-plugin-istanbul":"~6.1.1","chai":"^4.1.2","chai-as-promised":"^7","cpx2":"^3.0.0","eslint":"^8.36.0","glob":"^7.1.2","mocha":"^10.0.0","nyc":"^15.1.0","rimraf":"^3.0.2","sinon":"^9.0.2","source-map-loader":"^4.0.0","typescript":"~5.0.2","webpack":"^5.76.0"},"//dependencies":["NOTE: these dependencies should be only for things that DO NOT APPEAR IN THE API","NOTE: core-frontend should remain UI technology agnostic, so no react/angular dependencies are allowed"],"dependencies":{"@itwin/object-storage-azure":"^1.5.0","@itwin/cloud-agnostic-core":"^1.5.0","@itwin/object-storage-core":"^1.5.0","@itwin/core-i18n":"workspace:*","@itwin/core-telemetry":"workspace:*","@itwin/webgl-compatibility":"workspace:*","@loaders.gl/core":"^3.1.6","@loaders.gl/draco":"^3.1.6","fuse.js":"^3.3.0","wms-capabilities":"0.4.0","reflect-metadata":"0.1.13"},"nyc":{"extends":"./node_modules/@itwin/build-tools/.nycrc"},"eslintConfig":{"plugins":["@itwin"],"extends":"plugin:@itwin/itwinjs-recommended","rules":{"@itwin/no-internal-barrel-imports":["error",{"required-barrel-modules":["./src/tile/internal.ts"]}],"@itwin/public-extension-exports":["error",{"releaseTags":["public","preview"],"outputApiFile":false}]},"overrides":[{"files":["*.test.ts","*.test.tsx","**/test/**/*.ts"],"rules":{"@itwin/no-internal-barrel-imports":"off"}}]}}');
 
 /***/ }),