@itwin/editor-frontend 4.0.0-dev.52 → 4.0.0-dev.55

package/lib/esm/SketchTools.d.ts

@@ -1,305 +1,305 @@
-import { DialogItem, DialogProperty, DialogPropertySyncItem } from "@itwin/appui-abstract";
-import { Id64String } from "@itwin/core-bentley";
-import { ElementGeometryBuilderParams, ElementGeometryInfo, FlatBufferGeometryStream, GeometricElementProps, GeometryParams, GeometryStreamProps, JsonGeometryStream, PlacementProps } from "@itwin/core-common";
-import { BeButtonEvent, BeModifierKeys, DecorateContext, DynamicsContext, EventHandled, HitDetail, SnapDetail, ToolAssistanceInstruction } from "@itwin/core-frontend";
-import { CurvePrimitive, GeometryQuery, Matrix3d, Path, Point3d, Transform, Vector3d } from "@itwin/core-geometry";
-import { CreateElementWithDynamicsTool } from "./CreateElementTool";
-/** @alpha Values for [[CreateOrContinueTool.createCurvePhase] to support join and closure. */
-export declare enum CreateCurvePhase {
-    /** Current tool phase changes CurvePrimitive startPoint.
-     * ex. Arc defined by center, start would return this when accepted length is 1.
-     */
-    DefineStart = 0,
-    /** Current tool phase changes CurvePrimitive endPoint.
-     * ex. Arc defined by start, end, mid would return this when accepted length is 1.
-     */
-    DefineEnd = 1,
-    /** Current tool phase does NOT change CurvePrimitive startPoint or endPoint.
-     * ex. When defining arc mid point, or start and end tangents for a bcurve return this.
-     */
-    DefineOther = 2
-}
-/** @alpha Base class for creating open and closed paths. */
-export declare abstract class CreateOrContinuePathTool extends CreateElementWithDynamicsTool {
-    protected _createCurvePhase: CreateCurvePhase;
-    protected readonly accepted: Point3d[];
-    protected current?: CurvePrimitive;
-    protected continuationData?: {
-        props: GeometricElementProps;
-        path: Path;
-        params: GeometryParams;
-    };
-    protected isClosed: boolean;
-    protected isConstruction: boolean;
-    protected _snapGeomId?: Id64String;
-    protected _startedCmd?: string;
-    protected startCommand(): Promise<string>;
-    protected get allowJoin(): boolean;
-    protected get allowClosure(): boolean;
-    protected get allowSimplify(): boolean;
-    protected get wantSmartRotation(): boolean;
-    protected get wantPickableDynamics(): boolean;
-    protected get wantJoin(): boolean;
-    protected get wantClosure(): boolean;
-    protected get wantSimplify(): boolean;
-    protected get showCurveConstructions(): boolean;
-    protected get showJoin(): boolean;
-    protected get showClosure(): boolean;
-    protected get createCurvePhase(): CreateCurvePhase;
-    /** Sub-classes should override unless they don't support join or closure. */
-    protected updateCurvePhase(): void;
-    /** Implemented by sub-classes to create the new curve or construction curve for placement dynamics.
-   * @param ev The current button event from a click or motion event.
-   * @param isDynamics true when called for dynamics and the point from ev should be included in the result curve.
-   * @internal
-   */
-    protected abstract createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
-    protected getCurrentRotation(ev: BeButtonEvent): Matrix3d;
-    protected getUpVector(ev: BeButtonEvent): Vector3d;
-    protected updateCurveAndContinuationData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
-    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
-    protected updateDynamicData(ev: BeButtonEvent): Promise<boolean>;
-    protected get isContinueExistingPath(): boolean;
-    protected isValidForContinue(snap: SnapDetail): Promise<{
-        props: GeometricElementProps;
-        path: Path;
-        params: GeometryParams;
-    } | undefined>;
-    protected isValidForJoin(): Promise<boolean>;
-    protected isValidForClosure(): Promise<boolean>;
-    static isSingleOpenPath(info: ElementGeometryInfo): {
-        path: Path;
-        params: GeometryParams;
-    } | undefined;
-    static isPathEndPoint(curve: CurvePrimitive, path: Path): boolean;
-    static isPathClosurePoint(curve: CurvePrimitive, path?: Path): boolean;
-    protected addConstructionGraphics(curve: CurvePrimitive, showCurve: boolean, context: DynamicsContext): void;
-    protected showConstructionGraphics(_ev: BeButtonEvent, context: DynamicsContext): boolean;
-    onDynamicFrame(ev: BeButtonEvent, context: DynamicsContext): void;
-    protected showJoinIndicator(context: DecorateContext, pt: Point3d): void;
-    protected showClosureIndicator(context: DecorateContext, pt: Point3d): void;
-    testDecorationHit(id: Id64String): boolean;
-    getToolTip(hit: HitDetail): Promise<HTMLElement | string>;
-    protected getSnapGeometry(): GeometryQuery | undefined;
-    getDecorationGeometry(_hit: HitDetail): GeometryStreamProps | undefined;
-    protected addPickableGraphics(context: DecorateContext): void;
-    decorate(context: DecorateContext): void;
-    onModifierKeyTransition(_wentDown: boolean, modifier: BeModifierKeys, _event: KeyboardEvent): Promise<EventHandled>;
-    protected getPlacementProps(): PlacementProps | undefined;
-    protected createNewPath(placement: PlacementProps): JsonGeometryStream | FlatBufferGeometryStream | undefined;
-    protected continueExistingPath(placement: PlacementProps): JsonGeometryStream | FlatBufferGeometryStream | undefined;
-    protected getGeometryProps(placement: PlacementProps): JsonGeometryStream | FlatBufferGeometryStream | undefined;
-    protected getElementProps(placement: PlacementProps): GeometricElementProps | undefined;
-    protected doCreateElement(props: GeometricElementProps, data?: ElementGeometryBuilderParams): Promise<void>;
-    protected setupAccuDraw(): void;
-    onUndoPreviousStep(): Promise<boolean>;
-    onPostInstall(): Promise<void>;
-}
-/** @alpha Creates a line string or shape. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateLineStringTool extends CreateOrContinuePathTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected get wantPickableDynamics(): boolean;
-    protected provideToolAssistance(_mainInstrText?: string, _additionalInstr?: ToolAssistanceInstruction[]): void;
-    protected get wantClosure(): boolean;
-    protected updateCurvePhase(): void;
-    protected isComplete(ev: BeButtonEvent): boolean;
-    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
-    protected cancelPoint(ev: BeButtonEvent): Promise<boolean>;
-    onRestartTool(): Promise<void>;
-}
-/** @alpha */
-export declare enum ArcMethod {
-    CenterStart = 0,
-    StartCenter = 1,
-    StartMidEnd = 2,
-    StartEndMid = 3
-}
-/** @alpha Creates an arc. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateArcTool extends CreateOrContinuePathTool {
-    static toolId: string;
-    static iconSpec: string;
-    static get minArgs(): number;
-    static get maxArgs(): number;
-    protected get showCurveConstructions(): boolean;
-    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
-    protected setupAccuDraw(): void;
-    private static methodMessage;
-    private static getMethodChoices;
-    private _methodProperty;
-    get methodProperty(): DialogProperty<number>;
-    get method(): ArcMethod;
-    set method(method: ArcMethod);
-    private _useRadiusProperty;
-    get useRadiusProperty(): DialogProperty<boolean>;
-    get useRadius(): boolean;
-    set useRadius(value: boolean);
-    private _radiusProperty;
-    get radiusProperty(): DialogProperty<number>;
-    get radius(): number;
-    set radius(value: number);
-    private _useSweepProperty;
-    get useSweepProperty(): DialogProperty<boolean>;
-    get useSweep(): boolean;
-    set useSweep(value: boolean);
-    private _sweepProperty;
-    get sweepProperty(): DialogProperty<number>;
-    get sweep(): number;
-    set sweep(value: number);
-    protected isComplete(_ev: BeButtonEvent): boolean;
-    protected updateCurvePhase(): void;
-    protected createConstructionCurve(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
-    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
-    private syncToolSettingsRadiusAndSweep;
-    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    onRestartTool(): Promise<void>;
-    onInstall(): Promise<boolean>;
-    /** The keyin takes the following arguments, all of which are optional:
-     *  - `method=0|1|2|3` How arc will be defined. 0 for center/start, 1 for start/center, 2 for start/mid/end, and 3 for start/end/mid.
-     *  - `radius=number` Arc radius for start/center or center/start, 0 to define by points.
-     *  - `sweep=number` Arc sweep angle in degrees for start/center or center/start, 0 to define by points.
-     */
-    parseAndRun(...inputArgs: string[]): Promise<boolean>;
-}
-/** @alpha */
-export declare enum CircleMethod {
-    Center = 0,
-    Edge = 1
-}
-/** @alpha Creates a circle. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateCircleTool extends CreateOrContinuePathTool {
-    static toolId: string;
-    static iconSpec: string;
-    static get minArgs(): number;
-    static get maxArgs(): number;
-    protected get showCurveConstructions(): boolean;
-    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
-    protected setupAccuDraw(): void;
-    private static methodMessage;
-    private static getMethodChoices;
-    private _methodProperty;
-    get methodProperty(): DialogProperty<number>;
-    get method(): CircleMethod;
-    set method(method: CircleMethod);
-    private _useRadiusProperty;
-    get useRadiusProperty(): DialogProperty<boolean>;
-    get useRadius(): boolean;
-    set useRadius(value: boolean);
-    private _radiusProperty;
-    get radiusProperty(): DialogProperty<number>;
-    get radius(): number;
-    set radius(value: number);
-    protected isComplete(_ev: BeButtonEvent): boolean;
-    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
-    protected cancelPoint(_ev: BeButtonEvent): Promise<boolean>;
-    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    onRestartTool(): Promise<void>;
-    onReinitialize(): Promise<void>;
-    onPostInstall(): Promise<void>;
-    onInstall(): Promise<boolean>;
-    /** The keyin takes the following arguments, all of which are optional:
-     *  - `method=0|1` How circle will be defined. 0 for center, 1 for edge.
-     *  - `radius=number` Circle radius, 0 to define by points.
-     */
-    parseAndRun(...inputArgs: string[]): Promise<boolean>;
-}
-/** @alpha Creates an ellipse. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateEllipseTool extends CreateOrContinuePathTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected isComplete(_ev: BeButtonEvent): boolean;
-    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
-    protected setupAccuDraw(): void;
-    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
-    onRestartTool(): Promise<void>;
-}
-/** @alpha Creates a rectangle by corner points. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateRectangleTool extends CreateOrContinuePathTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected localToWorld: Transform;
-    protected originLocal?: Point3d;
-    protected cornerLocal?: Point3d;
-    static get minArgs(): number;
-    static get maxArgs(): number;
-    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
-    protected setupAccuDraw(): void;
-    private _useRadiusProperty;
-    get useRadiusProperty(): DialogProperty<boolean>;
-    get useRadius(): boolean;
-    set useRadius(value: boolean);
-    private _radiusProperty;
-    get radiusProperty(): DialogProperty<number>;
-    get radius(): number;
-    set radius(value: number);
-    protected isComplete(_ev: BeButtonEvent): boolean;
-    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
-    protected createNewPath(placement: PlacementProps): JsonGeometryStream | FlatBufferGeometryStream | undefined;
-    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    onRestartTool(): Promise<void>;
-    onInstall(): Promise<boolean>;
-    /** The keyin takes the following arguments, all of which are optional:
-     *  - `radius=number` Corner radius, 0 for sharp corners.
-     */
-    parseAndRun(...inputArgs: string[]): Promise<boolean>;
-}
-/** @alpha */
-export declare enum BCurveMethod {
-    ControlPoints = 0,
-    ThroughPoints = 1
-}
-/** @alpha Creates a bspline curve by poles or through points. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateBCurveTool extends CreateOrContinuePathTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected _isPhysicallyClosedOrComplete: boolean;
-    protected _tangentPhase: CreateCurvePhase;
-    static get minArgs(): number;
-    static get maxArgs(): number;
-    protected get wantPickableDynamics(): boolean;
-    protected get showCurveConstructions(): boolean;
-    protected provideToolAssistance(_mainInstrText?: string, _additionalInstr?: ToolAssistanceInstruction[]): void;
-    private static methodMessage;
-    private static getMethodChoices;
-    private _methodProperty;
-    get methodProperty(): DialogProperty<number>;
-    get method(): BCurveMethod;
-    set method(method: BCurveMethod);
-    private _orderProperty;
-    get orderProperty(): DialogProperty<number>;
-    get order(): number;
-    set order(value: number);
-    protected get minOrder(): number;
-    protected get maxOrder(): number;
-    private _tangentsProperty;
-    get tangentsProperty(): DialogProperty<boolean>;
-    get tangents(): boolean;
-    set tangents(value: boolean);
-    protected get wantClosure(): boolean;
-    protected get requiredPointCount(): number;
-    protected get createCurvePhase(): CreateCurvePhase;
-    protected updateCurvePhase(): void;
-    protected isComplete(ev: BeButtonEvent): boolean;
-    protected showConstructionGraphics(ev: BeButtonEvent, context: DynamicsContext): boolean;
-    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
-    protected getSnapGeometry(): GeometryQuery | undefined;
-    protected acceptPoint(ev: BeButtonEvent): Promise<boolean>;
-    protected cancelPoint(ev: BeButtonEvent): Promise<boolean>;
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    onRestartTool(): Promise<void>;
-    onInstall(): Promise<boolean>;
-    /** The keyin takes the following arguments, all of which are optional:
-     *  - `method=0|1` How bcurve will be defined. 0 for control points, 1 for through points.
-     *  - `order=number` bcurve order from 2 to 16.
-     *  - 'tangents=0|1 Whether to specify start/end tangents for through points construction.
-     */
-    parseAndRun(...inputArgs: string[]): Promise<boolean>;
-}
+import { DialogItem, DialogProperty, DialogPropertySyncItem } from "@itwin/appui-abstract";
+import { Id64String } from "@itwin/core-bentley";
+import { ElementGeometryBuilderParams, ElementGeometryInfo, FlatBufferGeometryStream, GeometricElementProps, GeometryParams, GeometryStreamProps, JsonGeometryStream, PlacementProps } from "@itwin/core-common";
+import { BeButtonEvent, BeModifierKeys, DecorateContext, DynamicsContext, EventHandled, HitDetail, SnapDetail, ToolAssistanceInstruction } from "@itwin/core-frontend";
+import { CurvePrimitive, GeometryQuery, Matrix3d, Path, Point3d, Transform, Vector3d } from "@itwin/core-geometry";
+import { CreateElementWithDynamicsTool } from "./CreateElementTool";
+/** @alpha Values for [[CreateOrContinueTool.createCurvePhase] to support join and closure. */
+export declare enum CreateCurvePhase {
+    /** Current tool phase changes CurvePrimitive startPoint.
+     * ex. Arc defined by center, start would return this when accepted length is 1.
+     */
+    DefineStart = 0,
+    /** Current tool phase changes CurvePrimitive endPoint.
+     * ex. Arc defined by start, end, mid would return this when accepted length is 1.
+     */
+    DefineEnd = 1,
+    /** Current tool phase does NOT change CurvePrimitive startPoint or endPoint.
+     * ex. When defining arc mid point, or start and end tangents for a bcurve return this.
+     */
+    DefineOther = 2
+}
+/** @alpha Base class for creating open and closed paths. */
+export declare abstract class CreateOrContinuePathTool extends CreateElementWithDynamicsTool {
+    protected _createCurvePhase: CreateCurvePhase;
+    protected readonly accepted: Point3d[];
+    protected current?: CurvePrimitive;
+    protected continuationData?: {
+        props: GeometricElementProps;
+        path: Path;
+        params: GeometryParams;
+    };
+    protected isClosed: boolean;
+    protected isConstruction: boolean;
+    protected _snapGeomId?: Id64String;
+    protected _startedCmd?: string;
+    protected startCommand(): Promise<string>;
+    protected get allowJoin(): boolean;
+    protected get allowClosure(): boolean;
+    protected get allowSimplify(): boolean;
+    protected get wantSmartRotation(): boolean;
+    protected get wantPickableDynamics(): boolean;
+    protected get wantJoin(): boolean;
+    protected get wantClosure(): boolean;
+    protected get wantSimplify(): boolean;
+    protected get showCurveConstructions(): boolean;
+    protected get showJoin(): boolean;
+    protected get showClosure(): boolean;
+    protected get createCurvePhase(): CreateCurvePhase;
+    /** Sub-classes should override unless they don't support join or closure. */
+    protected updateCurvePhase(): void;
+    /** Implemented by sub-classes to create the new curve or construction curve for placement dynamics.
+   * @param ev The current button event from a click or motion event.
+   * @param isDynamics true when called for dynamics and the point from ev should be included in the result curve.
+   * @internal
+   */
+    protected abstract createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
+    protected getCurrentRotation(ev: BeButtonEvent): Matrix3d;
+    protected getUpVector(ev: BeButtonEvent): Vector3d;
+    protected updateCurveAndContinuationData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
+    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
+    protected updateDynamicData(ev: BeButtonEvent): Promise<boolean>;
+    protected get isContinueExistingPath(): boolean;
+    protected isValidForContinue(snap: SnapDetail): Promise<{
+        props: GeometricElementProps;
+        path: Path;
+        params: GeometryParams;
+    } | undefined>;
+    protected isValidForJoin(): Promise<boolean>;
+    protected isValidForClosure(): Promise<boolean>;
+    static isSingleOpenPath(info: ElementGeometryInfo): {
+        path: Path;
+        params: GeometryParams;
+    } | undefined;
+    static isPathEndPoint(curve: CurvePrimitive, path: Path): boolean;
+    static isPathClosurePoint(curve: CurvePrimitive, path?: Path): boolean;
+    protected addConstructionGraphics(curve: CurvePrimitive, showCurve: boolean, context: DynamicsContext): void;
+    protected showConstructionGraphics(_ev: BeButtonEvent, context: DynamicsContext): boolean;
+    onDynamicFrame(ev: BeButtonEvent, context: DynamicsContext): void;
+    protected showJoinIndicator(context: DecorateContext, pt: Point3d): void;
+    protected showClosureIndicator(context: DecorateContext, pt: Point3d): void;
+    testDecorationHit(id: Id64String): boolean;
+    getToolTip(hit: HitDetail): Promise<HTMLElement | string>;
+    protected getSnapGeometry(): GeometryQuery | undefined;
+    getDecorationGeometry(_hit: HitDetail): GeometryStreamProps | undefined;
+    protected addPickableGraphics(context: DecorateContext): void;
+    decorate(context: DecorateContext): void;
+    onModifierKeyTransition(_wentDown: boolean, modifier: BeModifierKeys, _event: KeyboardEvent): Promise<EventHandled>;
+    protected getPlacementProps(): PlacementProps | undefined;
+    protected createNewPath(placement: PlacementProps): JsonGeometryStream | FlatBufferGeometryStream | undefined;
+    protected continueExistingPath(placement: PlacementProps): JsonGeometryStream | FlatBufferGeometryStream | undefined;
+    protected getGeometryProps(placement: PlacementProps): JsonGeometryStream | FlatBufferGeometryStream | undefined;
+    protected getElementProps(placement: PlacementProps): GeometricElementProps | undefined;
+    protected doCreateElement(props: GeometricElementProps, data?: ElementGeometryBuilderParams): Promise<void>;
+    protected setupAccuDraw(): void;
+    onUndoPreviousStep(): Promise<boolean>;
+    onPostInstall(): Promise<void>;
+}
+/** @alpha Creates a line string or shape. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateLineStringTool extends CreateOrContinuePathTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected get wantPickableDynamics(): boolean;
+    protected provideToolAssistance(_mainInstrText?: string, _additionalInstr?: ToolAssistanceInstruction[]): void;
+    protected get wantClosure(): boolean;
+    protected updateCurvePhase(): void;
+    protected isComplete(ev: BeButtonEvent): boolean;
+    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
+    protected cancelPoint(ev: BeButtonEvent): Promise<boolean>;
+    onRestartTool(): Promise<void>;
+}
+/** @alpha */
+export declare enum ArcMethod {
+    CenterStart = 0,
+    StartCenter = 1,
+    StartMidEnd = 2,
+    StartEndMid = 3
+}
+/** @alpha Creates an arc. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateArcTool extends CreateOrContinuePathTool {
+    static toolId: string;
+    static iconSpec: string;
+    static get minArgs(): number;
+    static get maxArgs(): number;
+    protected get showCurveConstructions(): boolean;
+    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
+    protected setupAccuDraw(): void;
+    private static methodMessage;
+    private static getMethodChoices;
+    private _methodProperty;
+    get methodProperty(): DialogProperty<number>;
+    get method(): ArcMethod;
+    set method(method: ArcMethod);
+    private _useRadiusProperty;
+    get useRadiusProperty(): DialogProperty<boolean>;
+    get useRadius(): boolean;
+    set useRadius(value: boolean);
+    private _radiusProperty;
+    get radiusProperty(): DialogProperty<number>;
+    get radius(): number;
+    set radius(value: number);
+    private _useSweepProperty;
+    get useSweepProperty(): DialogProperty<boolean>;
+    get useSweep(): boolean;
+    set useSweep(value: boolean);
+    private _sweepProperty;
+    get sweepProperty(): DialogProperty<number>;
+    get sweep(): number;
+    set sweep(value: number);
+    protected isComplete(_ev: BeButtonEvent): boolean;
+    protected updateCurvePhase(): void;
+    protected createConstructionCurve(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
+    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
+    private syncToolSettingsRadiusAndSweep;
+    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    onRestartTool(): Promise<void>;
+    onInstall(): Promise<boolean>;
+    /** The keyin takes the following arguments, all of which are optional:
+     *  - `method=0|1|2|3` How arc will be defined. 0 for center/start, 1 for start/center, 2 for start/mid/end, and 3 for start/end/mid.
+     *  - `radius=number` Arc radius for start/center or center/start, 0 to define by points.
+     *  - `sweep=number` Arc sweep angle in degrees for start/center or center/start, 0 to define by points.
+     */
+    parseAndRun(...inputArgs: string[]): Promise<boolean>;
+}
+/** @alpha */
+export declare enum CircleMethod {
+    Center = 0,
+    Edge = 1
+}
+/** @alpha Creates a circle. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateCircleTool extends CreateOrContinuePathTool {
+    static toolId: string;
+    static iconSpec: string;
+    static get minArgs(): number;
+    static get maxArgs(): number;
+    protected get showCurveConstructions(): boolean;
+    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
+    protected setupAccuDraw(): void;
+    private static methodMessage;
+    private static getMethodChoices;
+    private _methodProperty;
+    get methodProperty(): DialogProperty<number>;
+    get method(): CircleMethod;
+    set method(method: CircleMethod);
+    private _useRadiusProperty;
+    get useRadiusProperty(): DialogProperty<boolean>;
+    get useRadius(): boolean;
+    set useRadius(value: boolean);
+    private _radiusProperty;
+    get radiusProperty(): DialogProperty<number>;
+    get radius(): number;
+    set radius(value: number);
+    protected isComplete(_ev: BeButtonEvent): boolean;
+    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
+    protected cancelPoint(_ev: BeButtonEvent): Promise<boolean>;
+    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    onRestartTool(): Promise<void>;
+    onReinitialize(): Promise<void>;
+    onPostInstall(): Promise<void>;
+    onInstall(): Promise<boolean>;
+    /** The keyin takes the following arguments, all of which are optional:
+     *  - `method=0|1` How circle will be defined. 0 for center, 1 for edge.
+     *  - `radius=number` Circle radius, 0 to define by points.
+     */
+    parseAndRun(...inputArgs: string[]): Promise<boolean>;
+}
+/** @alpha Creates an ellipse. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateEllipseTool extends CreateOrContinuePathTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected isComplete(_ev: BeButtonEvent): boolean;
+    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
+    protected setupAccuDraw(): void;
+    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
+    onRestartTool(): Promise<void>;
+}
+/** @alpha Creates a rectangle by corner points. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateRectangleTool extends CreateOrContinuePathTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected localToWorld: Transform;
+    protected originLocal?: Point3d;
+    protected cornerLocal?: Point3d;
+    static get minArgs(): number;
+    static get maxArgs(): number;
+    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
+    protected setupAccuDraw(): void;
+    private _useRadiusProperty;
+    get useRadiusProperty(): DialogProperty<boolean>;
+    get useRadius(): boolean;
+    set useRadius(value: boolean);
+    private _radiusProperty;
+    get radiusProperty(): DialogProperty<number>;
+    get radius(): number;
+    set radius(value: number);
+    protected isComplete(_ev: BeButtonEvent): boolean;
+    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
+    protected createNewPath(placement: PlacementProps): JsonGeometryStream | FlatBufferGeometryStream | undefined;
+    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    onRestartTool(): Promise<void>;
+    onInstall(): Promise<boolean>;
+    /** The keyin takes the following arguments, all of which are optional:
+     *  - `radius=number` Corner radius, 0 for sharp corners.
+     */
+    parseAndRun(...inputArgs: string[]): Promise<boolean>;
+}
+/** @alpha */
+export declare enum BCurveMethod {
+    ControlPoints = 0,
+    ThroughPoints = 1
+}
+/** @alpha Creates a bspline curve by poles or through points. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateBCurveTool extends CreateOrContinuePathTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected _isPhysicallyClosedOrComplete: boolean;
+    protected _tangentPhase: CreateCurvePhase;
+    static get minArgs(): number;
+    static get maxArgs(): number;
+    protected get wantPickableDynamics(): boolean;
+    protected get showCurveConstructions(): boolean;
+    protected provideToolAssistance(_mainInstrText?: string, _additionalInstr?: ToolAssistanceInstruction[]): void;
+    private static methodMessage;
+    private static getMethodChoices;
+    private _methodProperty;
+    get methodProperty(): DialogProperty<number>;
+    get method(): BCurveMethod;
+    set method(method: BCurveMethod);
+    private _orderProperty;
+    get orderProperty(): DialogProperty<number>;
+    get order(): number;
+    set order(value: number);
+    protected get minOrder(): number;
+    protected get maxOrder(): number;
+    private _tangentsProperty;
+    get tangentsProperty(): DialogProperty<boolean>;
+    get tangents(): boolean;
+    set tangents(value: boolean);
+    protected get wantClosure(): boolean;
+    protected get requiredPointCount(): number;
+    protected get createCurvePhase(): CreateCurvePhase;
+    protected updateCurvePhase(): void;
+    protected isComplete(ev: BeButtonEvent): boolean;
+    protected showConstructionGraphics(ev: BeButtonEvent, context: DynamicsContext): boolean;
+    protected createNewCurvePrimitive(ev: BeButtonEvent, isDynamics: boolean): CurvePrimitive | undefined;
+    protected getSnapGeometry(): GeometryQuery | undefined;
+    protected acceptPoint(ev: BeButtonEvent): Promise<boolean>;
+    protected cancelPoint(ev: BeButtonEvent): Promise<boolean>;
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    onRestartTool(): Promise<void>;
+    onInstall(): Promise<boolean>;
+    /** The keyin takes the following arguments, all of which are optional:
+     *  - `method=0|1` How bcurve will be defined. 0 for control points, 1 for through points.
+     *  - `order=number` bcurve order from 2 to 16.
+     *  - 'tangents=0|1 Whether to specify start/end tangents for through points construction.
+     */
+    parseAndRun(...inputArgs: string[]): Promise<boolean>;
+}
 //# sourceMappingURL=SketchTools.d.ts.map