@itwin/editor-frontend 3.7.17 → 3.8.0

package/lib/esm/SolidPrimitiveTools.d.ts

@@ -1,319 +1,319 @@
-import { DialogItem, DialogProperty, DialogPropertySyncItem } from "@itwin/appui-abstract";
-import { ElementGeometryBuilderParams, FlatBufferGeometryStream, GeometricElementProps, JsonGeometryStream, PlacementProps } from "@itwin/core-common";
-import { BeButtonEvent, DynamicsContext, EventHandled, ToolAssistanceInstruction, Viewport } from "@itwin/core-frontend";
-import { CurveCollection, CurvePrimitive, GeometryQuery, Matrix3d, Point3d } from "@itwin/core-geometry";
-import { CreateElementWithDynamicsTool } from "./CreateElementTool";
-import { ModifyCurveTool } from "./ModifyCurveTools";
-/** @alpha Base class for creating a capped or uncapped SolidPrimitive. */
-export declare abstract class SolidPrimitiveTool extends CreateElementWithDynamicsTool {
-    protected readonly accepted: Point3d[];
-    protected baseRotation?: Matrix3d;
-    protected current?: GeometryQuery;
-    protected _startedCmd?: string;
-    protected allowView(vp: Viewport): boolean;
-    isCompatibleViewport(vp: Viewport | undefined, isSelectedViewChange: boolean): boolean;
-    protected startCommand(): Promise<string>;
-    protected getPlacementProps(): PlacementProps | undefined;
-    protected getGeometryProps(placement: PlacementProps): JsonGeometryStream | FlatBufferGeometryStream | undefined;
-    protected getElementProps(placement: PlacementProps): GeometricElementProps | undefined;
-    protected doCreateElement(props: GeometricElementProps, data?: ElementGeometryBuilderParams): Promise<void>;
-}
-/** @alpha Creates a sphere. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateSphereTool extends SolidPrimitiveTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
-    protected setupAccuDraw(): void;
-    private _useRadiusProperty;
-    get useRadiusProperty(): DialogProperty<boolean>;
-    get useRadius(): boolean;
-    set useRadius(value: boolean);
-    private _radiusProperty;
-    get radiusProperty(): DialogProperty<number>;
-    get radius(): number;
-    set radius(value: number);
-    private _cappedProperty;
-    get cappedProperty(): DialogProperty<boolean>;
-    get capped(): boolean;
-    set capped(value: boolean);
-    protected isComplete(_ev: BeButtonEvent): boolean;
-    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
-    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    onRestartTool(): Promise<void>;
-}
-/** @alpha Values for [[CreateCylinderTool.createPhase]. */
-export declare enum CreateCylinderPhase {
-    /** Current tool phase to define center of base */
-    AcceptBase = 0,
-    /** Current tool phase to define radius or base axes */
-    AcceptRadius = 1,
-    /** Current tool phase to define length or axis */
-    AcceptLength = 2,
-    /** Current tool phase to accept result */
-    AcceptResult = 3
-}
-/** @alpha Creates a cylinder. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateCylinderTool extends SolidPrimitiveTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected createPhase: CreateCylinderPhase;
-    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
-    protected setupAccuDraw(): void;
-    private _useRadiusProperty;
-    get useRadiusProperty(): DialogProperty<boolean>;
-    get useRadius(): boolean;
-    set useRadius(value: boolean);
-    private _radiusProperty;
-    get radiusProperty(): DialogProperty<number>;
-    get radius(): number;
-    set radius(value: number);
-    private _useLengthProperty;
-    get useLengthProperty(): DialogProperty<boolean>;
-    get useLength(): boolean;
-    set useLength(value: boolean);
-    private _lengthProperty;
-    get lengthProperty(): DialogProperty<number>;
-    get length(): number;
-    set length(value: number);
-    private _cappedProperty;
-    get cappedProperty(): DialogProperty<boolean>;
-    get capped(): boolean;
-    set capped(value: boolean);
-    private _orthogonalProperty;
-    get orthogonalProperty(): DialogProperty<boolean>;
-    get orthogonal(): boolean;
-    set orthogonal(value: boolean);
-    protected isComplete(_ev: BeButtonEvent): boolean;
-    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
-    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    onRestartTool(): Promise<void>;
-}
-/** @alpha Values for [[CreateConeTool.createPhase]. */
-export declare enum CreateConePhase {
-    /** Current tool phase to define center of base */
-    AcceptBase = 0,
-    /** Current tool phase to define base radius or base axes */
-    AcceptBaseRadius = 1,
-    /** Current tool phase to define length or axis */
-    AcceptLength = 2,
-    /** Current tool phase to define top radius */
-    AcceptTopRadius = 3,
-    /** Current tool phase to accept result */
-    AcceptResult = 4
-}
-/** @alpha Creates a cone. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateConeTool extends SolidPrimitiveTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected createPhase: CreateConePhase;
-    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
-    protected setupAccuDraw(): void;
-    private _useBaseRadiusProperty;
-    get useBaseRadiusProperty(): DialogProperty<boolean>;
-    get useBaseRadius(): boolean;
-    set useBaseRadius(value: boolean);
-    private _baseRadiusProperty;
-    get baseRadiusProperty(): DialogProperty<number>;
-    get baseRadius(): number;
-    set baseRadius(value: number);
-    private _useTopRadiusProperty;
-    get useTopRadiusProperty(): DialogProperty<boolean>;
-    get useTopRadius(): boolean;
-    set useTopRadius(value: boolean);
-    private _topRadiusProperty;
-    get topRadiusProperty(): DialogProperty<number>;
-    get topRadius(): number;
-    set topRadius(value: number);
-    private _useLengthProperty;
-    get useLengthProperty(): DialogProperty<boolean>;
-    get useLength(): boolean;
-    set useLength(value: boolean);
-    private _lengthProperty;
-    get lengthProperty(): DialogProperty<number>;
-    get length(): number;
-    set length(value: number);
-    private _cappedProperty;
-    get cappedProperty(): DialogProperty<boolean>;
-    get capped(): boolean;
-    set capped(value: boolean);
-    private _orthogonalProperty;
-    get orthogonalProperty(): DialogProperty<boolean>;
-    get orthogonal(): boolean;
-    set orthogonal(value: boolean);
-    protected isComplete(_ev: BeButtonEvent): boolean;
-    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
-    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    onRestartTool(): Promise<void>;
-}
-/** @alpha Creates a bix. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateBoxTool extends SolidPrimitiveTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
-    protected setupAccuDraw(): void;
-    private _useLengthProperty;
-    get useLengthProperty(): DialogProperty<boolean>;
-    get useLength(): boolean;
-    set useLength(value: boolean);
-    private _lengthProperty;
-    get lengthProperty(): DialogProperty<number>;
-    get length(): number;
-    set length(value: number);
-    private _useWidthProperty;
-    get useWidthProperty(): DialogProperty<boolean>;
-    get useWidth(): boolean;
-    set useWidth(value: boolean);
-    private _widthProperty;
-    get widthProperty(): DialogProperty<number>;
-    get width(): number;
-    set width(value: number);
-    private _useHeightProperty;
-    get useHeightProperty(): DialogProperty<boolean>;
-    get useHeight(): boolean;
-    set useHeight(value: boolean);
-    private _heightProperty;
-    get heightProperty(): DialogProperty<number>;
-    get height(): number;
-    set height(value: number);
-    private _cappedProperty;
-    get cappedProperty(): DialogProperty<boolean>;
-    get capped(): boolean;
-    set capped(value: boolean);
-    private _orthogonalProperty;
-    get orthogonalProperty(): DialogProperty<boolean>;
-    get orthogonal(): boolean;
-    set orthogonal(value: boolean);
-    protected isComplete(_ev: BeButtonEvent): boolean;
-    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
-    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    onRestartTool(): Promise<void>;
-}
-/** @alpha Values for [[CreateTorusTool.createPhase]. */
-export declare enum CreateTorusPhase {
-    /** Current tool phase to define start point */
-    AcceptStart = 0,
-    /** Current tool phase to define center point */
-    AcceptCenter = 1,
-    /** Current tool phase to define  secondary radius */
-    AcceptSecondaryRadius = 2,
-    /** Current tool phase to define sweep angle */
-    AcceptAngle = 3,
-    /** Current tool phase to accept result */
-    AcceptResult = 4
-}
-/** @alpha Creates a torus pipe. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
-export declare class CreateTorusTool extends SolidPrimitiveTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected createPhase: CreateTorusPhase;
-    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
-    protected setupAccuDraw(): void;
-    private _usePrimaryRadiusProperty;
-    get usePrimaryRadiusProperty(): DialogProperty<boolean>;
-    get usePrimaryRadius(): boolean;
-    set usePrimaryRadius(value: boolean);
-    private _primaryRadiusProperty;
-    get primaryRadiusProperty(): DialogProperty<number>;
-    get primaryRadius(): number;
-    set primaryRadius(value: number);
-    private _useSecondaryRadiusProperty;
-    get useSecondaryRadiusProperty(): DialogProperty<boolean>;
-    get useSecondaryRadius(): boolean;
-    set useSecondaryRadius(value: boolean);
-    private _secondaryRadiusProperty;
-    get secondaryRadiusProperty(): DialogProperty<number>;
-    get secondaryRadius(): number;
-    set secondaryRadius(value: number);
-    private _useAngleProperty;
-    get useAngleProperty(): DialogProperty<boolean>;
-    get useAngle(): boolean;
-    set useAngle(value: boolean);
-    private _angleProperty;
-    get angleProperty(): DialogProperty<number>;
-    get angle(): number;
-    set angle(value: number);
-    private _cappedProperty;
-    get cappedProperty(): DialogProperty<boolean>;
-    get capped(): boolean;
-    set capped(value: boolean);
-    protected isComplete(_ev: BeButtonEvent): boolean;
-    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
-    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    onRestartTool(): Promise<void>;
-}
-/** @alpha Tool for extruding paths and regions. */
-export declare class ExtrudeCurveTool extends ModifyCurveTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected allowView(vp: Viewport): boolean;
-    private _useLengthProperty;
-    get useLengthProperty(): DialogProperty<boolean>;
-    get useLength(): boolean;
-    set useLength(value: boolean);
-    private _lengthProperty;
-    get lengthProperty(): DialogProperty<number>;
-    get length(): number;
-    set length(value: number);
-    private _cappedProperty;
-    get cappedProperty(): DialogProperty<boolean>;
-    get capped(): boolean;
-    set capped(value: boolean);
-    private _orthogonalProperty;
-    get orthogonalProperty(): DialogProperty<boolean>;
-    get orthogonal(): boolean;
-    set orthogonal(value: boolean);
-    private _keepProfileProperty;
-    get keepProfileProperty(): DialogProperty<boolean>;
-    get keepProfile(): boolean;
-    set keepProfile(value: boolean);
-    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    protected acceptCurve(curve: CurveCollection | CurvePrimitive): boolean;
-    protected modifyCurve(ev: BeButtonEvent, isAccept: boolean): GeometryQuery | undefined;
-    protected get wantModifyOriginal(): boolean;
-    protected setupAccuDraw(): void;
-    protected provideToolAssistance(_mainInstrText?: string, _additionalInstr?: ToolAssistanceInstruction[]): void;
-    onRestartTool(): Promise<void>;
-}
-/** @alpha Tool for revolving paths and regions. */
-export declare class RevolveCurveTool extends ModifyCurveTool {
-    static toolId: string;
-    static iconSpec: string;
-    protected points: Point3d[];
-    protected allowView(vp: Viewport): boolean;
-    private _angleProperty;
-    get angleProperty(): DialogProperty<number>;
-    get angle(): number;
-    set angle(value: number);
-    private _cappedProperty;
-    get cappedProperty(): DialogProperty<boolean>;
-    get capped(): boolean;
-    set capped(value: boolean);
-    private _keepProfileProperty;
-    get keepProfileProperty(): DialogProperty<boolean>;
-    get keepProfile(): boolean;
-    set keepProfile(value: boolean);
-    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
-    supplyToolSettingsProperties(): DialogItem[] | undefined;
-    protected acceptCurve(curve: CurveCollection | CurvePrimitive): boolean;
-    protected modifyCurve(ev: BeButtonEvent, isAccept: boolean): GeometryQuery | undefined;
-    onDynamicFrame(ev: BeButtonEvent, context: DynamicsContext): void;
-    protected get wantModifyOriginal(): boolean;
-    protected get wantAdditionalInput(): boolean;
-    protected gatherInput(ev: BeButtonEvent): Promise<EventHandled | undefined>;
-    protected setupAccuDraw(): void;
-    protected provideToolAssistance(_mainInstrText?: string, _additionalInstr?: ToolAssistanceInstruction[]): void;
-    onRestartTool(): Promise<void>;
-}
+import { DialogItem, DialogProperty, DialogPropertySyncItem } from "@itwin/appui-abstract";
+import { ElementGeometryBuilderParams, FlatBufferGeometryStream, GeometricElementProps, JsonGeometryStream, PlacementProps } from "@itwin/core-common";
+import { BeButtonEvent, DynamicsContext, EventHandled, ToolAssistanceInstruction, Viewport } from "@itwin/core-frontend";
+import { CurveCollection, CurvePrimitive, GeometryQuery, Matrix3d, Point3d } from "@itwin/core-geometry";
+import { CreateElementWithDynamicsTool } from "./CreateElementTool";
+import { ModifyCurveTool } from "./ModifyCurveTools";
+/** @alpha Base class for creating a capped or uncapped SolidPrimitive. */
+export declare abstract class SolidPrimitiveTool extends CreateElementWithDynamicsTool {
+    protected readonly accepted: Point3d[];
+    protected baseRotation?: Matrix3d;
+    protected current?: GeometryQuery;
+    protected _startedCmd?: string;
+    protected allowView(vp: Viewport): boolean;
+    isCompatibleViewport(vp: Viewport | undefined, isSelectedViewChange: boolean): boolean;
+    protected startCommand(): Promise<string>;
+    protected getPlacementProps(): PlacementProps | undefined;
+    protected getGeometryProps(placement: PlacementProps): JsonGeometryStream | FlatBufferGeometryStream | undefined;
+    protected getElementProps(placement: PlacementProps): GeometricElementProps | undefined;
+    protected doCreateElement(props: GeometricElementProps, data?: ElementGeometryBuilderParams): Promise<void>;
+}
+/** @alpha Creates a sphere. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateSphereTool extends SolidPrimitiveTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
+    protected setupAccuDraw(): void;
+    private _useRadiusProperty;
+    get useRadiusProperty(): DialogProperty<boolean>;
+    get useRadius(): boolean;
+    set useRadius(value: boolean);
+    private _radiusProperty;
+    get radiusProperty(): DialogProperty<number>;
+    get radius(): number;
+    set radius(value: number);
+    private _cappedProperty;
+    get cappedProperty(): DialogProperty<boolean>;
+    get capped(): boolean;
+    set capped(value: boolean);
+    protected isComplete(_ev: BeButtonEvent): boolean;
+    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
+    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    onRestartTool(): Promise<void>;
+}
+/** @alpha Values for [[CreateCylinderTool.createPhase]. */
+export declare enum CreateCylinderPhase {
+    /** Current tool phase to define center of base */
+    AcceptBase = 0,
+    /** Current tool phase to define radius or base axes */
+    AcceptRadius = 1,
+    /** Current tool phase to define length or axis */
+    AcceptLength = 2,
+    /** Current tool phase to accept result */
+    AcceptResult = 3
+}
+/** @alpha Creates a cylinder. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateCylinderTool extends SolidPrimitiveTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected createPhase: CreateCylinderPhase;
+    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
+    protected setupAccuDraw(): void;
+    private _useRadiusProperty;
+    get useRadiusProperty(): DialogProperty<boolean>;
+    get useRadius(): boolean;
+    set useRadius(value: boolean);
+    private _radiusProperty;
+    get radiusProperty(): DialogProperty<number>;
+    get radius(): number;
+    set radius(value: number);
+    private _useLengthProperty;
+    get useLengthProperty(): DialogProperty<boolean>;
+    get useLength(): boolean;
+    set useLength(value: boolean);
+    private _lengthProperty;
+    get lengthProperty(): DialogProperty<number>;
+    get length(): number;
+    set length(value: number);
+    private _cappedProperty;
+    get cappedProperty(): DialogProperty<boolean>;
+    get capped(): boolean;
+    set capped(value: boolean);
+    private _orthogonalProperty;
+    get orthogonalProperty(): DialogProperty<boolean>;
+    get orthogonal(): boolean;
+    set orthogonal(value: boolean);
+    protected isComplete(_ev: BeButtonEvent): boolean;
+    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
+    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    onRestartTool(): Promise<void>;
+}
+/** @alpha Values for [[CreateConeTool.createPhase]. */
+export declare enum CreateConePhase {
+    /** Current tool phase to define center of base */
+    AcceptBase = 0,
+    /** Current tool phase to define base radius or base axes */
+    AcceptBaseRadius = 1,
+    /** Current tool phase to define length or axis */
+    AcceptLength = 2,
+    /** Current tool phase to define top radius */
+    AcceptTopRadius = 3,
+    /** Current tool phase to accept result */
+    AcceptResult = 4
+}
+/** @alpha Creates a cone. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateConeTool extends SolidPrimitiveTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected createPhase: CreateConePhase;
+    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
+    protected setupAccuDraw(): void;
+    private _useBaseRadiusProperty;
+    get useBaseRadiusProperty(): DialogProperty<boolean>;
+    get useBaseRadius(): boolean;
+    set useBaseRadius(value: boolean);
+    private _baseRadiusProperty;
+    get baseRadiusProperty(): DialogProperty<number>;
+    get baseRadius(): number;
+    set baseRadius(value: number);
+    private _useTopRadiusProperty;
+    get useTopRadiusProperty(): DialogProperty<boolean>;
+    get useTopRadius(): boolean;
+    set useTopRadius(value: boolean);
+    private _topRadiusProperty;
+    get topRadiusProperty(): DialogProperty<number>;
+    get topRadius(): number;
+    set topRadius(value: number);
+    private _useLengthProperty;
+    get useLengthProperty(): DialogProperty<boolean>;
+    get useLength(): boolean;
+    set useLength(value: boolean);
+    private _lengthProperty;
+    get lengthProperty(): DialogProperty<number>;
+    get length(): number;
+    set length(value: number);
+    private _cappedProperty;
+    get cappedProperty(): DialogProperty<boolean>;
+    get capped(): boolean;
+    set capped(value: boolean);
+    private _orthogonalProperty;
+    get orthogonalProperty(): DialogProperty<boolean>;
+    get orthogonal(): boolean;
+    set orthogonal(value: boolean);
+    protected isComplete(_ev: BeButtonEvent): boolean;
+    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
+    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    onRestartTool(): Promise<void>;
+}
+/** @alpha Creates a bix. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateBoxTool extends SolidPrimitiveTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
+    protected setupAccuDraw(): void;
+    private _useLengthProperty;
+    get useLengthProperty(): DialogProperty<boolean>;
+    get useLength(): boolean;
+    set useLength(value: boolean);
+    private _lengthProperty;
+    get lengthProperty(): DialogProperty<number>;
+    get length(): number;
+    set length(value: number);
+    private _useWidthProperty;
+    get useWidthProperty(): DialogProperty<boolean>;
+    get useWidth(): boolean;
+    set useWidth(value: boolean);
+    private _widthProperty;
+    get widthProperty(): DialogProperty<number>;
+    get width(): number;
+    set width(value: number);
+    private _useHeightProperty;
+    get useHeightProperty(): DialogProperty<boolean>;
+    get useHeight(): boolean;
+    set useHeight(value: boolean);
+    private _heightProperty;
+    get heightProperty(): DialogProperty<number>;
+    get height(): number;
+    set height(value: number);
+    private _cappedProperty;
+    get cappedProperty(): DialogProperty<boolean>;
+    get capped(): boolean;
+    set capped(value: boolean);
+    private _orthogonalProperty;
+    get orthogonalProperty(): DialogProperty<boolean>;
+    get orthogonal(): boolean;
+    set orthogonal(value: boolean);
+    protected isComplete(_ev: BeButtonEvent): boolean;
+    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
+    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    onRestartTool(): Promise<void>;
+}
+/** @alpha Values for [[CreateTorusTool.createPhase]. */
+export declare enum CreateTorusPhase {
+    /** Current tool phase to define start point */
+    AcceptStart = 0,
+    /** Current tool phase to define center point */
+    AcceptCenter = 1,
+    /** Current tool phase to define  secondary radius */
+    AcceptSecondaryRadius = 2,
+    /** Current tool phase to define sweep angle */
+    AcceptAngle = 3,
+    /** Current tool phase to accept result */
+    AcceptResult = 4
+}
+/** @alpha Creates a torus pipe. Uses model and category from [[BriefcaseConnection.editorToolSettings]]. */
+export declare class CreateTorusTool extends SolidPrimitiveTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected createPhase: CreateTorusPhase;
+    protected provideToolAssistance(mainInstrText?: string, additionalInstr?: ToolAssistanceInstruction[]): void;
+    protected setupAccuDraw(): void;
+    private _usePrimaryRadiusProperty;
+    get usePrimaryRadiusProperty(): DialogProperty<boolean>;
+    get usePrimaryRadius(): boolean;
+    set usePrimaryRadius(value: boolean);
+    private _primaryRadiusProperty;
+    get primaryRadiusProperty(): DialogProperty<number>;
+    get primaryRadius(): number;
+    set primaryRadius(value: number);
+    private _useSecondaryRadiusProperty;
+    get useSecondaryRadiusProperty(): DialogProperty<boolean>;
+    get useSecondaryRadius(): boolean;
+    set useSecondaryRadius(value: boolean);
+    private _secondaryRadiusProperty;
+    get secondaryRadiusProperty(): DialogProperty<number>;
+    get secondaryRadius(): number;
+    set secondaryRadius(value: number);
+    private _useAngleProperty;
+    get useAngleProperty(): DialogProperty<boolean>;
+    get useAngle(): boolean;
+    set useAngle(value: boolean);
+    private _angleProperty;
+    get angleProperty(): DialogProperty<number>;
+    get angle(): number;
+    set angle(value: number);
+    private _cappedProperty;
+    get cappedProperty(): DialogProperty<boolean>;
+    get capped(): boolean;
+    set capped(value: boolean);
+    protected isComplete(_ev: BeButtonEvent): boolean;
+    protected updateElementData(ev: BeButtonEvent, isDynamics: boolean): Promise<void>;
+    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    onRestartTool(): Promise<void>;
+}
+/** @alpha Tool for extruding paths and regions. */
+export declare class ExtrudeCurveTool extends ModifyCurveTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected allowView(vp: Viewport): boolean;
+    private _useLengthProperty;
+    get useLengthProperty(): DialogProperty<boolean>;
+    get useLength(): boolean;
+    set useLength(value: boolean);
+    private _lengthProperty;
+    get lengthProperty(): DialogProperty<number>;
+    get length(): number;
+    set length(value: number);
+    private _cappedProperty;
+    get cappedProperty(): DialogProperty<boolean>;
+    get capped(): boolean;
+    set capped(value: boolean);
+    private _orthogonalProperty;
+    get orthogonalProperty(): DialogProperty<boolean>;
+    get orthogonal(): boolean;
+    set orthogonal(value: boolean);
+    private _keepProfileProperty;
+    get keepProfileProperty(): DialogProperty<boolean>;
+    get keepProfile(): boolean;
+    set keepProfile(value: boolean);
+    protected getToolSettingPropertyLocked(property: DialogProperty<any>): DialogProperty<any> | undefined;
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    protected acceptCurve(curve: CurveCollection | CurvePrimitive): boolean;
+    protected modifyCurve(ev: BeButtonEvent, isAccept: boolean): GeometryQuery | undefined;
+    protected get wantModifyOriginal(): boolean;
+    protected setupAccuDraw(): void;
+    protected provideToolAssistance(_mainInstrText?: string, _additionalInstr?: ToolAssistanceInstruction[]): void;
+    onRestartTool(): Promise<void>;
+}
+/** @alpha Tool for revolving paths and regions. */
+export declare class RevolveCurveTool extends ModifyCurveTool {
+    static toolId: string;
+    static iconSpec: string;
+    protected points: Point3d[];
+    protected allowView(vp: Viewport): boolean;
+    private _angleProperty;
+    get angleProperty(): DialogProperty<number>;
+    get angle(): number;
+    set angle(value: number);
+    private _cappedProperty;
+    get cappedProperty(): DialogProperty<boolean>;
+    get capped(): boolean;
+    set capped(value: boolean);
+    private _keepProfileProperty;
+    get keepProfileProperty(): DialogProperty<boolean>;
+    get keepProfile(): boolean;
+    set keepProfile(value: boolean);
+    applyToolSettingPropertyChange(updatedValue: DialogPropertySyncItem): Promise<boolean>;
+    supplyToolSettingsProperties(): DialogItem[] | undefined;
+    protected acceptCurve(curve: CurveCollection | CurvePrimitive): boolean;
+    protected modifyCurve(ev: BeButtonEvent, isAccept: boolean): GeometryQuery | undefined;
+    onDynamicFrame(ev: BeButtonEvent, context: DynamicsContext): void;
+    protected get wantModifyOriginal(): boolean;
+    protected get wantAdditionalInput(): boolean;
+    protected gatherInput(ev: BeButtonEvent): Promise<EventHandled | undefined>;
+    protected setupAccuDraw(): void;
+    protected provideToolAssistance(_mainInstrText?: string, _additionalInstr?: ToolAssistanceInstruction[]): void;
+    onRestartTool(): Promise<void>;
+}
 //# sourceMappingURL=SolidPrimitiveTools.d.ts.map