@itwin/editor-frontend 3.6.0-dev.8 → 3.6.0

package/lib/cjs/ProjectLocation/ProjectGeolocation.js

@@ -1,533 +1,533 @@
-"use strict";
-/*---------------------------------------------------------------------------------------------
-* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
-* See LICENSE.md in the project root for license terms and full copyright notice.
-*--------------------------------------------------------------------------------------------*/
-/** @packageDocumentation
- * @module Editing
- */
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.ProjectGeolocationMoveTool = exports.ProjectGeolocationNorthTool = exports.ProjectGeolocationPointTool = void 0;
-const core_frontend_1 = require("@itwin/core-frontend");
-const core_geometry_1 = require("@itwin/core-geometry");
-const core_common_1 = require("@itwin/core-common");
-const ProjectExtentsDecoration_1 = require("./ProjectExtentsDecoration");
-const appui_abstract_1 = require("@itwin/appui-abstract");
-const EditTool_1 = require("../EditTool");
-function translatePrompt(key) {
-    return EditTool_1.EditTools.translate(`ProjectLocation:Prompts.${key}`);
-}
-function translateMessage(key) {
-    return EditTool_1.EditTools.translate(`ProjectLocation:Message.${key}`);
-}
-/** @internal */
-class LabelDecoration {
-    constructor(worldLocation, label) {
-        this.worldLocation = new core_geometry_1.Point3d();
-        this.position = new core_geometry_1.Point3d();
-        this.worldLocation.setFrom(worldLocation);
-        this.label = label;
-    }
-    drawDecoration(ctx) {
-        ctx.font = "16px san-serif";
-        const labelHeight = ctx.measureText("M").width; // Close enough for border padding...
-        const labelWidth = ctx.measureText(this.label).width + labelHeight;
-        ctx.lineWidth = 1;
-        ctx.strokeStyle = "white";
-        ctx.fillStyle = "rgba(0,0,0,.4)";
-        ctx.shadowColor = "black";
-        ctx.shadowBlur = 10;
-        ctx.fillRect(-(labelWidth / 2), -labelHeight, labelWidth, labelHeight * 2);
-        ctx.strokeRect(-(labelWidth / 2), -labelHeight, labelWidth, labelHeight * 2);
-        ctx.fillStyle = "white";
-        ctx.shadowBlur = 0;
-        ctx.textAlign = "center";
-        ctx.textBaseline = "middle";
-        ctx.fillText(this.label, 0, 0);
-    }
-    setPosition(vp) {
-        vp.worldToView(this.worldLocation, this.position);
-        this.position.y -= Math.floor(vp.pixelsFromInches(0.45)) + 0.5; // Offset from world location...
-        return vp.viewRect.containsPoint(this.position);
-    }
-    addDecoration(context) {
-        if (this.setPosition(context.viewport))
-            context.addCanvasDecoration(this);
-    }
-}
-/** Change or update geolocation for project.
- * To show tool settings for specifying lat/long, make sure formatting and parsing data are cached before the tool starts
- * by calling QuantityFormatter.onInitialized at app startup.
- * @beta
- */
-class ProjectGeolocationPointTool extends core_frontend_1.PrimitiveTool {
-    constructor() {
-        super(...arguments);
-        this._haveToolSettings = false;
-        this._cartographicFromArgs = false;
-        this._accept = false;
-        this._scale = 1.0;
-    }
-    static get minArgs() { return 0; }
-    static get maxArgs() { return 4; } // latitude, longitude, altitude, north direction...
-    isCompatibleViewport(vp, isSelectedViewChange) { return (super.isCompatibleViewport(vp, isSelectedViewChange) && undefined !== vp && vp.view.isSpatialView()); }
-    isValidLocation(_ev, _isButtonEvent) { return true; } // Allow snapping to terrain, etc. outside project extents...
-    requireWriteableTarget() { return false; } // Tool doesn't modify the imodel...
-    async onPostInstall() {
-        await super.onPostInstall();
-        this.setupAndPromptForNextAction();
-    }
-    async onCleanup() {
-        await super.onCleanup();
-        this.unsuspendDecorations();
-    }
-    async onRestartTool() { return this.exitTool(); }
-    async onUnsuspend() { this.provideToolAssistance(); }
-    get latitudeProperty() {
-        if (!this._latitudeProperty)
-            this._latitudeProperty = new appui_abstract_1.DialogProperty(new core_frontend_1.AngleDescription("latitude", translateMessage("Latitude")), 0.0);
-        return this._latitudeProperty;
-    }
-    get latitude() { return this.latitudeProperty.value; }
-    set latitude(value) { this.latitudeProperty.value = value; }
-    get longitudeProperty() {
-        if (!this._longitudeProperty)
-            this._longitudeProperty = new appui_abstract_1.DialogProperty(new core_frontend_1.AngleDescription("longitude", translateMessage("Longitude")), 0.0);
-        return this._longitudeProperty;
-    }
-    get longitude() { return this.longitudeProperty.value; }
-    set longitude(value) { this.longitudeProperty.value = value; }
-    get altitudeProperty() {
-        if (!this._altitudeProperty)
-            this._altitudeProperty = new appui_abstract_1.DialogProperty(new core_frontend_1.LengthDescription("altitude", core_frontend_1.CoreTools.translate("Measure.Labels.Altitude")), 0.0);
-        return this._altitudeProperty;
-    }
-    get altitude() { return this.altitudeProperty.value; }
-    set altitude(value) { this.altitudeProperty.value = value; }
-    get northProperty() {
-        if (!this._northProperty)
-            this._northProperty = new appui_abstract_1.DialogProperty(new core_frontend_1.AngleDescription("north", translateMessage("North")), 0.0);
-        return this._northProperty;
-    }
-    get north() { return this.northProperty.value; }
-    set north(value) { this.northProperty.value = value; }
-    syncToolSettingsCoordinates() {
-        this.syncToolSettingsProperties([this.latitudeProperty.syncItem, this.longitudeProperty.syncItem, this.altitudeProperty.syncItem, this.northProperty.syncItem]);
-    }
-    async applyToolSettingPropertyChange(updatedValue) {
-        return this.changeToolSettingPropertyValue(updatedValue);
-    }
-    supplyToolSettingsProperties() {
-        this._haveToolSettings = true;
-        const toolSettings = new Array();
-        toolSettings.push(this.latitudeProperty.toDialogItem({ rowPriority: 1, columnIndex: 2 }));
-        toolSettings.push(this.longitudeProperty.toDialogItem({ rowPriority: 2, columnIndex: 2 }));
-        toolSettings.push(this.altitudeProperty.toDialogItem({ rowPriority: 3, columnIndex: 2 }));
-        toolSettings.push(this.northProperty.toDialogItem({ rowPriority: 4, columnIndex: 2 }));
-        return toolSettings;
-    }
-    provideToolAssistance() {
-        const acceptMsg = core_frontend_1.CoreTools.translate(undefined === this._origin ? "ElementSet.Inputs.AcceptPoint" : "ElementSet.Inputs.Accept");
-        const rejectMsg = core_frontend_1.CoreTools.translate("ElementSet.Inputs.Cancel");
-        const mainInstruction = core_frontend_1.ToolAssistance.createInstruction(this.iconSpec, translatePrompt(undefined === this._origin ? "IdentifyKnownLocation" : "ConfirmCoordinates"));
-        const sections = [];
-        const mouseInstructions = [];
-        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.LeftClick, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
-        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.RightClick, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
-        sections.push(core_frontend_1.ToolAssistance.createSection(mouseInstructions, core_frontend_1.ToolAssistance.inputsLabel));
-        const touchInstructions = [];
-        if (!core_frontend_1.ToolAssistance.createTouchCursorInstructions(touchInstructions))
-            touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.OneTouchTap, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
-        touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.TwoTouchTap, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
-        sections.push(core_frontend_1.ToolAssistance.createSection(touchInstructions, core_frontend_1.ToolAssistance.inputsLabel));
-        const instructions = core_frontend_1.ToolAssistance.createInstructions(mainInstruction, sections);
-        core_frontend_1.IModelApp.notifications.setToolAssistance(instructions);
-    }
-    setupAndPromptForNextAction() {
-        core_frontend_1.IModelApp.accuSnap.enableSnap(undefined === this._origin);
-        this.provideToolAssistance();
-    }
-    pulseDecoration() {
-        if (!this._accept)
-            return;
-        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-        if (undefined === deco)
-            return;
-        this._scale += 0.1;
-        if (this._scale > 1.6)
-            this._scale = 1.0;
-        deco.viewport.invalidateDecorations();
-        setTimeout(() => this.pulseDecoration(), 100);
-    }
-    unsuspendDecorations() {
-        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-        if (undefined !== deco)
-            deco.suspendGeolocationDecorations = false;
-    }
-    decorate(context) {
-        if (undefined === this._origin || !context.viewport.view.isSpatialView())
-            return;
-        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-        if (undefined === deco)
-            return;
-        deco.suspendGeolocationDecorations = true;
-        deco.drawMonumentPoint(context, this._origin, this._scale);
-        if (undefined !== this._labelDeco)
-            this._labelDeco.addDecoration(context);
-    }
-    async onMouseMotion(ev) {
-        if (undefined === ev.viewport || this._accept)
-            return;
-        this._origin = ev.point.clone();
-        ev.viewport.invalidateDecorations();
-    }
-    async onResetButtonUp(_ev) {
-        await this.onReinitialize(); // Calls onRestartTool to exit...
-        return core_frontend_1.EventHandled.No;
-    }
-    acceptDefaultLocation() {
-        // Greenwich is better default when testing control handle w/o tool settings support...
-        this.latitude = core_geometry_1.Angle.createDegrees(51.4934).radians;
-        this.longitude = core_geometry_1.Angle.createDegrees(0.0098).radians;
-        this.altitude = 50.0;
-        this.north = 0.0;
-    }
-    acceptKnownLocation(ev) {
-        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-        if (undefined === deco)
-            return;
-        this._accept = true; // Require explicit accept to give user a chance to change values...
-        this._origin = ev.point.clone();
-        this._labelDeco = new LabelDecoration(this._origin, translatePrompt("SpecifyCoordinates"));
-        if (!this._cartographicFromArgs) {
-            if (this.iModel.isGeoLocated) {
-                const cartographic = this.iModel.spatialToCartographicFromEcef(this._origin);
-                this.latitude = cartographic.latitude;
-                this.longitude = cartographic.longitude;
-                this.altitude = cartographic.height;
-                this.north = deco.getClockwiseAngleToNorth().radians;
-            }
-            else if (!this._haveToolSettings) {
-                this.acceptDefaultLocation();
-            }
-        }
-        this.syncToolSettingsCoordinates();
-        this.pulseDecoration(); // Pulse to indicate that we are waiting for user input...
-        this.setupAndPromptForNextAction();
-    }
-    async acceptCoordinates() {
-        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-        if (undefined === deco)
-            return;
-        const origin = core_common_1.Cartographic.fromRadians({ longitude: this.longitude, latitude: this.latitude, height: this.altitude });
-        if (!deco.updateEcefLocation(origin, this._origin, core_geometry_1.Angle.createRadians(this.north)))
-            return;
-        return this.onReinitialize(); // Calls onRestartTool to exit...
-    }
-    async onDataButtonDown(ev) {
-        if (undefined === ev.viewport)
-            return core_frontend_1.EventHandled.No; // Shouldn't really happen...
-        const haveKnownLocation = this._accept;
-        if (!haveKnownLocation)
-            this.acceptKnownLocation(ev);
-        const needAcceptPoint = !haveKnownLocation && this._haveToolSettings;
-        if (!needAcceptPoint)
-            await this.acceptCoordinates();
-        return core_frontend_1.EventHandled.No;
-    }
-    async onInstall() {
-        if (!ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.allowEcefLocationChange(false))
-            return false;
-        // Setup initial values here instead of supplyToolSettingsProperties to support keyin args w/o appui-react...
-        this.initializeToolSettingPropertyValues([this.latitudeProperty, this.longitudeProperty, this.altitudeProperty, this.northProperty]);
-        return true;
-    }
-    /** The keyin takes the following arguments, all of which are optional:
-     *  - `latitude=number` Latitude of accept point in degrees.
-     *  - `longitude=number` Longitude of accept point in degrees.
-     *  - `altitude=number` Height above ellipsoid of accept point.
-     *  - `north=number` North direction in degrees of accept point.
-     */
-    async parseAndRun(...inputArgs) {
-        for (const arg of inputArgs) {
-            const parts = arg.split("=");
-            if (2 !== parts.length)
-                continue;
-            if (parts[0].toLowerCase().startsWith("la")) {
-                const latitude = Number.parseFloat(parts[1]);
-                if (!Number.isNaN(latitude)) {
-                    this.saveToolSettingPropertyValue(this.latitudeProperty, { value: core_geometry_1.Angle.createDegrees(latitude).radians });
-                    this._cartographicFromArgs = true;
-                }
-            }
-            else if (parts[0].toLowerCase().startsWith("lo")) {
-                const longitude = Number.parseFloat(parts[1]);
-                if (!Number.isNaN(longitude)) {
-                    this.saveToolSettingPropertyValue(this.longitudeProperty, { value: core_geometry_1.Angle.createDegrees(longitude).radians });
-                    this._cartographicFromArgs = true;
-                }
-            }
-            else if (parts[0].toLowerCase().startsWith("al")) {
-                const altitude = Number.parseFloat(parts[1]);
-                if (!Number.isNaN(altitude)) {
-                    this.saveToolSettingPropertyValue(this.altitudeProperty, { value: altitude });
-                    this._cartographicFromArgs = true;
-                }
-            }
-            else if (parts[0].toLowerCase().startsWith("no")) {
-                const north = Number.parseFloat(parts[1]);
-                if (!Number.isNaN(north)) {
-                    this.saveToolSettingPropertyValue(this.northProperty, { value: core_geometry_1.Angle.createDegrees(north).radians });
-                    this._cartographicFromArgs = true;
-                }
-            }
-        }
-        return this.run();
-    }
-    static async startTool() { return new ProjectGeolocationPointTool().run(); }
-}
-exports.ProjectGeolocationPointTool = ProjectGeolocationPointTool;
-ProjectGeolocationPointTool.toolId = "ProjectLocation.Geolocation.Point";
-ProjectGeolocationPointTool.iconSpec = "icon-globe"; // <== Tool button should use whatever icon you have here...
-/** Change or update geolocation direction to true north.
- * @beta
- */
-class ProjectGeolocationNorthTool extends core_frontend_1.PrimitiveTool {
-    isCompatibleViewport(vp, isSelectedViewChange) { return (super.isCompatibleViewport(vp, isSelectedViewChange) && undefined !== vp && vp.view.isSpatialView()); }
-    isValidLocation(_ev, _isButtonEvent) { return true; } // Allow snapping to terrain, etc. outside project extents...
-    requireWriteableTarget() { return false; } // Tool doesn't modify the imodel...
-    async onPostInstall() {
-        await super.onPostInstall();
-        this.setupAndPromptForNextAction();
-    }
-    async onCleanup() {
-        await super.onCleanup();
-        this.unsuspendDecorations();
-    }
-    async onRestartTool() { return this.exitTool(); }
-    async onUnsuspend() { this.provideToolAssistance(); }
-    provideToolAssistance() {
-        const acceptMsg = core_frontend_1.CoreTools.translate("ElementSet.Inputs.AcceptPoint");
-        const rejectMsg = core_frontend_1.CoreTools.translate("ElementSet.Inputs.Cancel");
-        const mainInstruction = core_frontend_1.ToolAssistance.createInstruction(this.iconSpec, translatePrompt(undefined === this._origin ? "IdentifyRefPoint" : "DefineAngle"));
-        const sections = [];
-        const mouseInstructions = [];
-        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.LeftClick, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
-        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.RightClick, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
-        sections.push(core_frontend_1.ToolAssistance.createSection(mouseInstructions, core_frontend_1.ToolAssistance.inputsLabel));
-        const touchInstructions = [];
-        if (!core_frontend_1.ToolAssistance.createTouchCursorInstructions(touchInstructions))
-            touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.OneTouchTap, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
-        touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.TwoTouchTap, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
-        sections.push(core_frontend_1.ToolAssistance.createSection(touchInstructions, core_frontend_1.ToolAssistance.inputsLabel));
-        const instructions = core_frontend_1.ToolAssistance.createInstructions(mainInstruction, sections);
-        core_frontend_1.IModelApp.notifications.setToolAssistance(instructions);
-    }
-    setupAndPromptForNextAction() {
-        core_frontend_1.IModelApp.accuSnap.enableSnap(true);
-        this.provideToolAssistance();
-        if (undefined === this._origin)
-            return;
-        const hints = new core_frontend_1.AccuDrawHintBuilder();
-        hints.setRotation(core_geometry_1.Matrix3d.createIdentity());
-        hints.setOrigin(this._origin);
-        hints.setModePolar();
-        hints.setOriginFixed = true;
-        hints.setLockZ = true;
-        hints.sendHints();
-    }
-    getAdjustedPoint(ev) {
-        if (undefined === this._origin)
-            return undefined;
-        return core_frontend_1.AccuDrawHintBuilder.projectPointToPlaneInView(ev.point, this._origin, core_geometry_1.Vector3d.unitZ(), ev.viewport, true);
-    }
-    unsuspendDecorations() {
-        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-        if (undefined !== deco)
-            deco.suspendGeolocationDecorations = false;
-    }
-    updateNorthVector(ev) {
-        if (undefined === ev.viewport)
-            return;
-        if (undefined === this._northDir)
-            this._northDir = core_geometry_1.Ray3d.create(ev.point, core_geometry_1.Vector3d.unitY());
-        else
-            this._northDir.origin.setFrom(undefined !== this._origin ? this._origin : ev.point);
-        const dirPt = this.getAdjustedPoint(ev);
-        if (undefined === dirPt)
-            return;
-        this._northDir.direction.setStartEnd(this._northDir.origin, dirPt);
-        if (this._northDir.direction.magnitude() < 1.0e-6)
-            this._northDir.direction.setFrom(core_geometry_1.Vector3d.unitY());
-        this._northDir.direction.z = 0.0;
-        this._northDir.direction.normalizeInPlace();
-    }
-    decorate(context) {
-        if (undefined === this._northDir || !context.viewport.view.isSpatialView())
-            return;
-        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-        if (undefined === deco)
-            return;
-        deco.suspendGeolocationDecorations = true;
-        deco.drawNorthArrow(context, this._northDir);
-    }
-    async onKeyTransition(wentDown, keyEvent) {
-        if (core_frontend_1.EventHandled.Yes === await super.onKeyTransition(wentDown, keyEvent))
-            return core_frontend_1.EventHandled.Yes;
-        return (wentDown && await core_frontend_1.AccuDrawShortcuts.processShortcutKey(keyEvent)) ? core_frontend_1.EventHandled.Yes : core_frontend_1.EventHandled.No;
-    }
-    async onMouseMotion(ev) {
-        if (undefined === ev.viewport)
-            return;
-        this.updateNorthVector(ev);
-        ev.viewport.invalidateDecorations();
-    }
-    async onResetButtonUp(_ev) {
-        await this.onReinitialize(); // Calls onRestartTool to exit...
-        return core_frontend_1.EventHandled.No;
-    }
-    async onDataButtonDown(ev) {
-        if (undefined === ev.viewport)
-            return core_frontend_1.EventHandled.No; // Shouldn't really happen...
-        if (undefined === this._origin) {
-            this._origin = ev.point.clone();
-            this.setupAndPromptForNextAction();
-            return core_frontend_1.EventHandled.No;
-        }
-        this.updateNorthVector(ev);
-        if (undefined !== this._northDir) {
-            const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-            if (undefined !== deco)
-                deco.updateNorthDirection(this._northDir);
-        }
-        await this.onReinitialize(); // Calls onRestartTool to exit...
-        return core_frontend_1.EventHandled.No;
-    }
-    async onInstall() { return ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.allowEcefLocationChange(true); }
-    static async startTool() { return new ProjectGeolocationNorthTool().run(); }
-}
-exports.ProjectGeolocationNorthTool = ProjectGeolocationNorthTool;
-ProjectGeolocationNorthTool.toolId = "ProjectLocation.Geolocation.North";
-ProjectGeolocationNorthTool.iconSpec = "icon-sort-up"; // <== Tool button should use whatever icon you have here...
-/** Move a geolocated model by specifying two points to define the offset.
- * @beta
- */
-class ProjectGeolocationMoveTool extends core_frontend_1.PrimitiveTool {
-    isCompatibleViewport(vp, isSelectedViewChange) { return (super.isCompatibleViewport(vp, isSelectedViewChange) && undefined !== vp && vp.view.isSpatialView()); }
-    isValidLocation(_ev, _isButtonEvent) { return true; } // Allow snapping to terrain, etc. outside project extents...
-    requireWriteableTarget() { return false; } // Tool doesn't modify the imodel...
-    async onPostInstall() {
-        await super.onPostInstall();
-        this.setupAndPromptForNextAction();
-    }
-    async onCleanup() {
-        await super.onCleanup();
-        this.unsuspendDecorations();
-    }
-    async onRestartTool() {
-        const tool = new ProjectGeolocationMoveTool();
-        if (!await tool.run())
-            return this.exitTool();
-    }
-    async onUnsuspend() { this.provideToolAssistance(); }
-    provideToolAssistance() {
-        const acceptMsg = core_frontend_1.CoreTools.translate("ElementSet.Inputs.AcceptPoint");
-        const rejectMsg = core_frontend_1.CoreTools.translate("ElementSet.Inputs.Cancel");
-        const mainInstruction = core_frontend_1.ToolAssistance.createInstruction(this.iconSpec, translatePrompt(undefined === this._origin ? "IdentifyRefPoint" : "DefineOffset"));
-        const sections = [];
-        const mouseInstructions = [];
-        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.LeftClick, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
-        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.RightClick, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
-        sections.push(core_frontend_1.ToolAssistance.createSection(mouseInstructions, core_frontend_1.ToolAssistance.inputsLabel));
-        const touchInstructions = [];
-        if (!core_frontend_1.ToolAssistance.createTouchCursorInstructions(touchInstructions))
-            touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.OneTouchTap, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
-        touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.TwoTouchTap, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
-        sections.push(core_frontend_1.ToolAssistance.createSection(touchInstructions, core_frontend_1.ToolAssistance.inputsLabel));
-        const instructions = core_frontend_1.ToolAssistance.createInstructions(mainInstruction, sections);
-        core_frontend_1.IModelApp.notifications.setToolAssistance(instructions);
-    }
-    setupAndPromptForNextAction() {
-        core_frontend_1.IModelApp.accuSnap.enableSnap(true);
-        this.provideToolAssistance();
-        if (undefined === this._origin)
-            return;
-        const hints = new core_frontend_1.AccuDrawHintBuilder();
-        hints.setRotation(core_geometry_1.Matrix3d.createIdentity());
-        hints.setOrigin(this._origin);
-        hints.setModePolar();
-        hints.setOriginFixed = true;
-        hints.sendHints();
-    }
-    unsuspendDecorations() {
-        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-        if (undefined !== deco)
-            deco.suspendGeolocationDecorations = false;
-    }
-    async acceptOffset(ev) {
-        if (undefined === ev.viewport || undefined === this._origin)
-            return;
-        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-        if (undefined === deco)
-            return;
-        const origin = this.iModel.spatialToCartographicFromEcef(ev.point);
-        if (!deco.updateEcefLocation(origin, this._origin))
-            return;
-        return this.onReinitialize(); // Calls onRestartTool to exit...
-    }
-    decorate(context) {
-        if (undefined === this._origin || undefined === this._current || !context.viewport.view.isSpatialView())
-            return;
-        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
-        if (undefined === deco)
-            return;
-        const builderAccVis = context.createGraphicBuilder(core_frontend_1.GraphicType.WorldDecoration);
-        const builderAccHid = context.createGraphicBuilder(core_frontend_1.GraphicType.WorldOverlay);
-        const colorAccVis = core_common_1.ColorDef.white.adjustedForContrast(context.viewport.view.backgroundColor);
-        const colorAccHid = colorAccVis.withAlpha(100);
-        builderAccVis.setSymbology(colorAccVis, core_common_1.ColorDef.black, 3);
-        builderAccHid.setSymbology(colorAccHid, core_common_1.ColorDef.black, 1, core_common_1.LinePixels.Code2);
-        const extents = this.iModel.projectExtents.cloneTranslated(core_geometry_1.Vector3d.createStartEnd(this._origin, this._current));
-        builderAccVis.addRangeBox(extents);
-        builderAccHid.addRangeBox(extents);
-        builderAccHid.addLineString([this._origin, this._current]);
-        context.addDecorationFromBuilder(builderAccVis);
-        context.addDecorationFromBuilder(builderAccHid);
-        deco.suspendGeolocationDecorations = true;
-    }
-    async onKeyTransition(wentDown, keyEvent) {
-        if (core_frontend_1.EventHandled.Yes === await super.onKeyTransition(wentDown, keyEvent))
-            return core_frontend_1.EventHandled.Yes;
-        return (wentDown && await core_frontend_1.AccuDrawShortcuts.processShortcutKey(keyEvent)) ? core_frontend_1.EventHandled.Yes : core_frontend_1.EventHandled.No;
-    }
-    async onMouseMotion(ev) {
-        if (undefined === ev.viewport)
-            return;
-        this._current = ev.point;
-        ev.viewport.invalidateDecorations();
-    }
-    async onResetButtonUp(_ev) {
-        if (undefined === this._origin)
-            await this.exitTool(); // exit to select tool if we haven't gotten first point...
-        else
-            await this.onReinitialize(); // Calls onRestartTool...
-        return core_frontend_1.EventHandled.No;
-    }
-    async onDataButtonDown(ev) {
-        if (undefined === ev.viewport)
-            return core_frontend_1.EventHandled.No; // Shouldn't really happen...
-        if (undefined === this._origin) {
-            this._origin = ev.point.clone();
-            this.setupAndPromptForNextAction();
-            return core_frontend_1.EventHandled.No;
-        }
-        await this.acceptOffset(ev);
-        return core_frontend_1.EventHandled.No;
-    }
-    async onInstall() { return ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.allowEcefLocationChange(true); }
-    static async startTool() { return new ProjectGeolocationMoveTool().run(); }
-}
-exports.ProjectGeolocationMoveTool = ProjectGeolocationMoveTool;
-ProjectGeolocationMoveTool.toolId = "ProjectLocation.Geolocation.Move";
-ProjectGeolocationMoveTool.iconSpec = "icon-move"; // <== Tool button should use whatever icon you have here...
+"use strict";
+/*---------------------------------------------------------------------------------------------
+* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
+* See LICENSE.md in the project root for license terms and full copyright notice.
+*--------------------------------------------------------------------------------------------*/
+/** @packageDocumentation
+ * @module Editing
+ */
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.ProjectGeolocationMoveTool = exports.ProjectGeolocationNorthTool = exports.ProjectGeolocationPointTool = void 0;
+const core_frontend_1 = require("@itwin/core-frontend");
+const core_geometry_1 = require("@itwin/core-geometry");
+const core_common_1 = require("@itwin/core-common");
+const ProjectExtentsDecoration_1 = require("./ProjectExtentsDecoration");
+const appui_abstract_1 = require("@itwin/appui-abstract");
+const EditTool_1 = require("../EditTool");
+function translatePrompt(key) {
+    return EditTool_1.EditTools.translate(`ProjectLocation:Prompts.${key}`);
+}
+function translateMessage(key) {
+    return EditTool_1.EditTools.translate(`ProjectLocation:Message.${key}`);
+}
+/** @internal */
+class LabelDecoration {
+    constructor(worldLocation, label) {
+        this.worldLocation = new core_geometry_1.Point3d();
+        this.position = new core_geometry_1.Point3d();
+        this.worldLocation.setFrom(worldLocation);
+        this.label = label;
+    }
+    drawDecoration(ctx) {
+        ctx.font = "16px san-serif";
+        const labelHeight = ctx.measureText("M").width; // Close enough for border padding...
+        const labelWidth = ctx.measureText(this.label).width + labelHeight;
+        ctx.lineWidth = 1;
+        ctx.strokeStyle = "white";
+        ctx.fillStyle = "rgba(0,0,0,.4)";
+        ctx.shadowColor = "black";
+        ctx.shadowBlur = 10;
+        ctx.fillRect(-(labelWidth / 2), -labelHeight, labelWidth, labelHeight * 2);
+        ctx.strokeRect(-(labelWidth / 2), -labelHeight, labelWidth, labelHeight * 2);
+        ctx.fillStyle = "white";
+        ctx.shadowBlur = 0;
+        ctx.textAlign = "center";
+        ctx.textBaseline = "middle";
+        ctx.fillText(this.label, 0, 0);
+    }
+    setPosition(vp) {
+        vp.worldToView(this.worldLocation, this.position);
+        this.position.y -= Math.floor(vp.pixelsFromInches(0.45)) + 0.5; // Offset from world location...
+        return vp.viewRect.containsPoint(this.position);
+    }
+    addDecoration(context) {
+        if (this.setPosition(context.viewport))
+            context.addCanvasDecoration(this);
+    }
+}
+/** Change or update geolocation for project.
+ * To show tool settings for specifying lat/long, make sure formatting and parsing data are cached before the tool starts
+ * by calling QuantityFormatter.onInitialized at app startup.
+ * @beta
+ */
+class ProjectGeolocationPointTool extends core_frontend_1.PrimitiveTool {
+    constructor() {
+        super(...arguments);
+        this._haveToolSettings = false;
+        this._cartographicFromArgs = false;
+        this._accept = false;
+        this._scale = 1.0;
+    }
+    static get minArgs() { return 0; }
+    static get maxArgs() { return 4; } // latitude, longitude, altitude, north direction...
+    isCompatibleViewport(vp, isSelectedViewChange) { return (super.isCompatibleViewport(vp, isSelectedViewChange) && undefined !== vp && vp.view.isSpatialView()); }
+    isValidLocation(_ev, _isButtonEvent) { return true; } // Allow snapping to terrain, etc. outside project extents...
+    requireWriteableTarget() { return false; } // Tool doesn't modify the imodel...
+    async onPostInstall() {
+        await super.onPostInstall();
+        this.setupAndPromptForNextAction();
+    }
+    async onCleanup() {
+        await super.onCleanup();
+        this.unsuspendDecorations();
+    }
+    async onRestartTool() { return this.exitTool(); }
+    async onUnsuspend() { this.provideToolAssistance(); }
+    get latitudeProperty() {
+        if (!this._latitudeProperty)
+            this._latitudeProperty = new appui_abstract_1.DialogProperty(new core_frontend_1.AngleDescription("latitude", translateMessage("Latitude")), 0.0);
+        return this._latitudeProperty;
+    }
+    get latitude() { return this.latitudeProperty.value; }
+    set latitude(value) { this.latitudeProperty.value = value; }
+    get longitudeProperty() {
+        if (!this._longitudeProperty)
+            this._longitudeProperty = new appui_abstract_1.DialogProperty(new core_frontend_1.AngleDescription("longitude", translateMessage("Longitude")), 0.0);
+        return this._longitudeProperty;
+    }
+    get longitude() { return this.longitudeProperty.value; }
+    set longitude(value) { this.longitudeProperty.value = value; }
+    get altitudeProperty() {
+        if (!this._altitudeProperty)
+            this._altitudeProperty = new appui_abstract_1.DialogProperty(new core_frontend_1.LengthDescription("altitude", core_frontend_1.CoreTools.translate("Measure.Labels.Altitude")), 0.0);
+        return this._altitudeProperty;
+    }
+    get altitude() { return this.altitudeProperty.value; }
+    set altitude(value) { this.altitudeProperty.value = value; }
+    get northProperty() {
+        if (!this._northProperty)
+            this._northProperty = new appui_abstract_1.DialogProperty(new core_frontend_1.AngleDescription("north", translateMessage("North")), 0.0);
+        return this._northProperty;
+    }
+    get north() { return this.northProperty.value; }
+    set north(value) { this.northProperty.value = value; }
+    syncToolSettingsCoordinates() {
+        this.syncToolSettingsProperties([this.latitudeProperty.syncItem, this.longitudeProperty.syncItem, this.altitudeProperty.syncItem, this.northProperty.syncItem]);
+    }
+    async applyToolSettingPropertyChange(updatedValue) {
+        return this.changeToolSettingPropertyValue(updatedValue);
+    }
+    supplyToolSettingsProperties() {
+        this._haveToolSettings = true;
+        const toolSettings = new Array();
+        toolSettings.push(this.latitudeProperty.toDialogItem({ rowPriority: 1, columnIndex: 2 }));
+        toolSettings.push(this.longitudeProperty.toDialogItem({ rowPriority: 2, columnIndex: 2 }));
+        toolSettings.push(this.altitudeProperty.toDialogItem({ rowPriority: 3, columnIndex: 2 }));
+        toolSettings.push(this.northProperty.toDialogItem({ rowPriority: 4, columnIndex: 2 }));
+        return toolSettings;
+    }
+    provideToolAssistance() {
+        const acceptMsg = core_frontend_1.CoreTools.translate(undefined === this._origin ? "ElementSet.Inputs.AcceptPoint" : "ElementSet.Inputs.Accept");
+        const rejectMsg = core_frontend_1.CoreTools.translate("ElementSet.Inputs.Cancel");
+        const mainInstruction = core_frontend_1.ToolAssistance.createInstruction(this.iconSpec, translatePrompt(undefined === this._origin ? "IdentifyKnownLocation" : "ConfirmCoordinates"));
+        const sections = [];
+        const mouseInstructions = [];
+        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.LeftClick, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
+        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.RightClick, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
+        sections.push(core_frontend_1.ToolAssistance.createSection(mouseInstructions, core_frontend_1.ToolAssistance.inputsLabel));
+        const touchInstructions = [];
+        if (!core_frontend_1.ToolAssistance.createTouchCursorInstructions(touchInstructions))
+            touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.OneTouchTap, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
+        touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.TwoTouchTap, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
+        sections.push(core_frontend_1.ToolAssistance.createSection(touchInstructions, core_frontend_1.ToolAssistance.inputsLabel));
+        const instructions = core_frontend_1.ToolAssistance.createInstructions(mainInstruction, sections);
+        core_frontend_1.IModelApp.notifications.setToolAssistance(instructions);
+    }
+    setupAndPromptForNextAction() {
+        core_frontend_1.IModelApp.accuSnap.enableSnap(undefined === this._origin);
+        this.provideToolAssistance();
+    }
+    pulseDecoration() {
+        if (!this._accept)
+            return;
+        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+        if (undefined === deco)
+            return;
+        this._scale += 0.1;
+        if (this._scale > 1.6)
+            this._scale = 1.0;
+        deco.viewport.invalidateDecorations();
+        setTimeout(() => this.pulseDecoration(), 100);
+    }
+    unsuspendDecorations() {
+        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+        if (undefined !== deco)
+            deco.suspendGeolocationDecorations = false;
+    }
+    decorate(context) {
+        if (undefined === this._origin || !context.viewport.view.isSpatialView())
+            return;
+        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+        if (undefined === deco)
+            return;
+        deco.suspendGeolocationDecorations = true;
+        deco.drawMonumentPoint(context, this._origin, this._scale);
+        if (undefined !== this._labelDeco)
+            this._labelDeco.addDecoration(context);
+    }
+    async onMouseMotion(ev) {
+        if (undefined === ev.viewport || this._accept)
+            return;
+        this._origin = ev.point.clone();
+        ev.viewport.invalidateDecorations();
+    }
+    async onResetButtonUp(_ev) {
+        await this.onReinitialize(); // Calls onRestartTool to exit...
+        return core_frontend_1.EventHandled.No;
+    }
+    acceptDefaultLocation() {
+        // Greenwich is better default when testing control handle w/o tool settings support...
+        this.latitude = core_geometry_1.Angle.createDegrees(51.4934).radians;
+        this.longitude = core_geometry_1.Angle.createDegrees(0.0098).radians;
+        this.altitude = 50.0;
+        this.north = 0.0;
+    }
+    acceptKnownLocation(ev) {
+        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+        if (undefined === deco)
+            return;
+        this._accept = true; // Require explicit accept to give user a chance to change values...
+        this._origin = ev.point.clone();
+        this._labelDeco = new LabelDecoration(this._origin, translatePrompt("SpecifyCoordinates"));
+        if (!this._cartographicFromArgs) {
+            if (this.iModel.isGeoLocated) {
+                const cartographic = this.iModel.spatialToCartographicFromEcef(this._origin);
+                this.latitude = cartographic.latitude;
+                this.longitude = cartographic.longitude;
+                this.altitude = cartographic.height;
+                this.north = deco.getClockwiseAngleToNorth().radians;
+            }
+            else if (!this._haveToolSettings) {
+                this.acceptDefaultLocation();
+            }
+        }
+        this.syncToolSettingsCoordinates();
+        this.pulseDecoration(); // Pulse to indicate that we are waiting for user input...
+        this.setupAndPromptForNextAction();
+    }
+    async acceptCoordinates() {
+        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+        if (undefined === deco)
+            return;
+        const origin = core_common_1.Cartographic.fromRadians({ longitude: this.longitude, latitude: this.latitude, height: this.altitude });
+        if (!deco.updateEcefLocation(origin, this._origin, core_geometry_1.Angle.createRadians(this.north)))
+            return;
+        return this.onReinitialize(); // Calls onRestartTool to exit...
+    }
+    async onDataButtonDown(ev) {
+        if (undefined === ev.viewport)
+            return core_frontend_1.EventHandled.No; // Shouldn't really happen...
+        const haveKnownLocation = this._accept;
+        if (!haveKnownLocation)
+            this.acceptKnownLocation(ev);
+        const needAcceptPoint = !haveKnownLocation && this._haveToolSettings;
+        if (!needAcceptPoint)
+            await this.acceptCoordinates();
+        return core_frontend_1.EventHandled.No;
+    }
+    async onInstall() {
+        if (!ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.allowEcefLocationChange(false))
+            return false;
+        // Setup initial values here instead of supplyToolSettingsProperties to support keyin args w/o appui-react...
+        this.initializeToolSettingPropertyValues([this.latitudeProperty, this.longitudeProperty, this.altitudeProperty, this.northProperty]);
+        return true;
+    }
+    /** The keyin takes the following arguments, all of which are optional:
+     *  - `latitude=number` Latitude of accept point in degrees.
+     *  - `longitude=number` Longitude of accept point in degrees.
+     *  - `altitude=number` Height above ellipsoid of accept point.
+     *  - `north=number` North direction in degrees of accept point.
+     */
+    async parseAndRun(...inputArgs) {
+        for (const arg of inputArgs) {
+            const parts = arg.split("=");
+            if (2 !== parts.length)
+                continue;
+            if (parts[0].toLowerCase().startsWith("la")) {
+                const latitude = Number.parseFloat(parts[1]);
+                if (!Number.isNaN(latitude)) {
+                    this.saveToolSettingPropertyValue(this.latitudeProperty, { value: core_geometry_1.Angle.createDegrees(latitude).radians });
+                    this._cartographicFromArgs = true;
+                }
+            }
+            else if (parts[0].toLowerCase().startsWith("lo")) {
+                const longitude = Number.parseFloat(parts[1]);
+                if (!Number.isNaN(longitude)) {
+                    this.saveToolSettingPropertyValue(this.longitudeProperty, { value: core_geometry_1.Angle.createDegrees(longitude).radians });
+                    this._cartographicFromArgs = true;
+                }
+            }
+            else if (parts[0].toLowerCase().startsWith("al")) {
+                const altitude = Number.parseFloat(parts[1]);
+                if (!Number.isNaN(altitude)) {
+                    this.saveToolSettingPropertyValue(this.altitudeProperty, { value: altitude });
+                    this._cartographicFromArgs = true;
+                }
+            }
+            else if (parts[0].toLowerCase().startsWith("no")) {
+                const north = Number.parseFloat(parts[1]);
+                if (!Number.isNaN(north)) {
+                    this.saveToolSettingPropertyValue(this.northProperty, { value: core_geometry_1.Angle.createDegrees(north).radians });
+                    this._cartographicFromArgs = true;
+                }
+            }
+        }
+        return this.run();
+    }
+    static async startTool() { return new ProjectGeolocationPointTool().run(); }
+}
+exports.ProjectGeolocationPointTool = ProjectGeolocationPointTool;
+ProjectGeolocationPointTool.toolId = "ProjectLocation.Geolocation.Point";
+ProjectGeolocationPointTool.iconSpec = "icon-globe"; // <== Tool button should use whatever icon you have here...
+/** Change or update geolocation direction to true north.
+ * @beta
+ */
+class ProjectGeolocationNorthTool extends core_frontend_1.PrimitiveTool {
+    isCompatibleViewport(vp, isSelectedViewChange) { return (super.isCompatibleViewport(vp, isSelectedViewChange) && undefined !== vp && vp.view.isSpatialView()); }
+    isValidLocation(_ev, _isButtonEvent) { return true; } // Allow snapping to terrain, etc. outside project extents...
+    requireWriteableTarget() { return false; } // Tool doesn't modify the imodel...
+    async onPostInstall() {
+        await super.onPostInstall();
+        this.setupAndPromptForNextAction();
+    }
+    async onCleanup() {
+        await super.onCleanup();
+        this.unsuspendDecorations();
+    }
+    async onRestartTool() { return this.exitTool(); }
+    async onUnsuspend() { this.provideToolAssistance(); }
+    provideToolAssistance() {
+        const acceptMsg = core_frontend_1.CoreTools.translate("ElementSet.Inputs.AcceptPoint");
+        const rejectMsg = core_frontend_1.CoreTools.translate("ElementSet.Inputs.Cancel");
+        const mainInstruction = core_frontend_1.ToolAssistance.createInstruction(this.iconSpec, translatePrompt(undefined === this._origin ? "IdentifyRefPoint" : "DefineAngle"));
+        const sections = [];
+        const mouseInstructions = [];
+        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.LeftClick, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
+        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.RightClick, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
+        sections.push(core_frontend_1.ToolAssistance.createSection(mouseInstructions, core_frontend_1.ToolAssistance.inputsLabel));
+        const touchInstructions = [];
+        if (!core_frontend_1.ToolAssistance.createTouchCursorInstructions(touchInstructions))
+            touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.OneTouchTap, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
+        touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.TwoTouchTap, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
+        sections.push(core_frontend_1.ToolAssistance.createSection(touchInstructions, core_frontend_1.ToolAssistance.inputsLabel));
+        const instructions = core_frontend_1.ToolAssistance.createInstructions(mainInstruction, sections);
+        core_frontend_1.IModelApp.notifications.setToolAssistance(instructions);
+    }
+    setupAndPromptForNextAction() {
+        core_frontend_1.IModelApp.accuSnap.enableSnap(true);
+        this.provideToolAssistance();
+        if (undefined === this._origin)
+            return;
+        const hints = new core_frontend_1.AccuDrawHintBuilder();
+        hints.setRotation(core_geometry_1.Matrix3d.createIdentity());
+        hints.setOrigin(this._origin);
+        hints.setModePolar();
+        hints.setOriginFixed = true;
+        hints.setLockZ = true;
+        hints.sendHints();
+    }
+    getAdjustedPoint(ev) {
+        if (undefined === this._origin)
+            return undefined;
+        return core_frontend_1.AccuDrawHintBuilder.projectPointToPlaneInView(ev.point, this._origin, core_geometry_1.Vector3d.unitZ(), ev.viewport, true);
+    }
+    unsuspendDecorations() {
+        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+        if (undefined !== deco)
+            deco.suspendGeolocationDecorations = false;
+    }
+    updateNorthVector(ev) {
+        if (undefined === ev.viewport)
+            return;
+        if (undefined === this._northDir)
+            this._northDir = core_geometry_1.Ray3d.create(ev.point, core_geometry_1.Vector3d.unitY());
+        else
+            this._northDir.origin.setFrom(undefined !== this._origin ? this._origin : ev.point);
+        const dirPt = this.getAdjustedPoint(ev);
+        if (undefined === dirPt)
+            return;
+        this._northDir.direction.setStartEnd(this._northDir.origin, dirPt);
+        if (this._northDir.direction.magnitude() < 1.0e-6)
+            this._northDir.direction.setFrom(core_geometry_1.Vector3d.unitY());
+        this._northDir.direction.z = 0.0;
+        this._northDir.direction.normalizeInPlace();
+    }
+    decorate(context) {
+        if (undefined === this._northDir || !context.viewport.view.isSpatialView())
+            return;
+        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+        if (undefined === deco)
+            return;
+        deco.suspendGeolocationDecorations = true;
+        deco.drawNorthArrow(context, this._northDir);
+    }
+    async onKeyTransition(wentDown, keyEvent) {
+        if (core_frontend_1.EventHandled.Yes === await super.onKeyTransition(wentDown, keyEvent))
+            return core_frontend_1.EventHandled.Yes;
+        return (wentDown && await core_frontend_1.AccuDrawShortcuts.processShortcutKey(keyEvent)) ? core_frontend_1.EventHandled.Yes : core_frontend_1.EventHandled.No;
+    }
+    async onMouseMotion(ev) {
+        if (undefined === ev.viewport)
+            return;
+        this.updateNorthVector(ev);
+        ev.viewport.invalidateDecorations();
+    }
+    async onResetButtonUp(_ev) {
+        await this.onReinitialize(); // Calls onRestartTool to exit...
+        return core_frontend_1.EventHandled.No;
+    }
+    async onDataButtonDown(ev) {
+        if (undefined === ev.viewport)
+            return core_frontend_1.EventHandled.No; // Shouldn't really happen...
+        if (undefined === this._origin) {
+            this._origin = ev.point.clone();
+            this.setupAndPromptForNextAction();
+            return core_frontend_1.EventHandled.No;
+        }
+        this.updateNorthVector(ev);
+        if (undefined !== this._northDir) {
+            const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+            if (undefined !== deco)
+                deco.updateNorthDirection(this._northDir);
+        }
+        await this.onReinitialize(); // Calls onRestartTool to exit...
+        return core_frontend_1.EventHandled.No;
+    }
+    async onInstall() { return ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.allowEcefLocationChange(true); }
+    static async startTool() { return new ProjectGeolocationNorthTool().run(); }
+}
+exports.ProjectGeolocationNorthTool = ProjectGeolocationNorthTool;
+ProjectGeolocationNorthTool.toolId = "ProjectLocation.Geolocation.North";
+ProjectGeolocationNorthTool.iconSpec = "icon-sort-up"; // <== Tool button should use whatever icon you have here...
+/** Move a geolocated model by specifying two points to define the offset.
+ * @beta
+ */
+class ProjectGeolocationMoveTool extends core_frontend_1.PrimitiveTool {
+    isCompatibleViewport(vp, isSelectedViewChange) { return (super.isCompatibleViewport(vp, isSelectedViewChange) && undefined !== vp && vp.view.isSpatialView()); }
+    isValidLocation(_ev, _isButtonEvent) { return true; } // Allow snapping to terrain, etc. outside project extents...
+    requireWriteableTarget() { return false; } // Tool doesn't modify the imodel...
+    async onPostInstall() {
+        await super.onPostInstall();
+        this.setupAndPromptForNextAction();
+    }
+    async onCleanup() {
+        await super.onCleanup();
+        this.unsuspendDecorations();
+    }
+    async onRestartTool() {
+        const tool = new ProjectGeolocationMoveTool();
+        if (!await tool.run())
+            return this.exitTool();
+    }
+    async onUnsuspend() { this.provideToolAssistance(); }
+    provideToolAssistance() {
+        const acceptMsg = core_frontend_1.CoreTools.translate("ElementSet.Inputs.AcceptPoint");
+        const rejectMsg = core_frontend_1.CoreTools.translate("ElementSet.Inputs.Cancel");
+        const mainInstruction = core_frontend_1.ToolAssistance.createInstruction(this.iconSpec, translatePrompt(undefined === this._origin ? "IdentifyRefPoint" : "DefineOffset"));
+        const sections = [];
+        const mouseInstructions = [];
+        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.LeftClick, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
+        mouseInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.RightClick, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Mouse));
+        sections.push(core_frontend_1.ToolAssistance.createSection(mouseInstructions, core_frontend_1.ToolAssistance.inputsLabel));
+        const touchInstructions = [];
+        if (!core_frontend_1.ToolAssistance.createTouchCursorInstructions(touchInstructions))
+            touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.OneTouchTap, acceptMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
+        touchInstructions.push(core_frontend_1.ToolAssistance.createInstruction(core_frontend_1.ToolAssistanceImage.TwoTouchTap, rejectMsg, false, core_frontend_1.ToolAssistanceInputMethod.Touch));
+        sections.push(core_frontend_1.ToolAssistance.createSection(touchInstructions, core_frontend_1.ToolAssistance.inputsLabel));
+        const instructions = core_frontend_1.ToolAssistance.createInstructions(mainInstruction, sections);
+        core_frontend_1.IModelApp.notifications.setToolAssistance(instructions);
+    }
+    setupAndPromptForNextAction() {
+        core_frontend_1.IModelApp.accuSnap.enableSnap(true);
+        this.provideToolAssistance();
+        if (undefined === this._origin)
+            return;
+        const hints = new core_frontend_1.AccuDrawHintBuilder();
+        hints.setRotation(core_geometry_1.Matrix3d.createIdentity());
+        hints.setOrigin(this._origin);
+        hints.setModePolar();
+        hints.setOriginFixed = true;
+        hints.sendHints();
+    }
+    unsuspendDecorations() {
+        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+        if (undefined !== deco)
+            deco.suspendGeolocationDecorations = false;
+    }
+    async acceptOffset(ev) {
+        if (undefined === ev.viewport || undefined === this._origin)
+            return;
+        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+        if (undefined === deco)
+            return;
+        const origin = this.iModel.spatialToCartographicFromEcef(ev.point);
+        if (!deco.updateEcefLocation(origin, this._origin))
+            return;
+        return this.onReinitialize(); // Calls onRestartTool to exit...
+    }
+    decorate(context) {
+        if (undefined === this._origin || undefined === this._current || !context.viewport.view.isSpatialView())
+            return;
+        const deco = ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.get();
+        if (undefined === deco)
+            return;
+        const builderAccVis = context.createGraphicBuilder(core_frontend_1.GraphicType.WorldDecoration);
+        const builderAccHid = context.createGraphicBuilder(core_frontend_1.GraphicType.WorldOverlay);
+        const colorAccVis = core_common_1.ColorDef.white.adjustedForContrast(context.viewport.view.backgroundColor);
+        const colorAccHid = colorAccVis.withAlpha(100);
+        builderAccVis.setSymbology(colorAccVis, core_common_1.ColorDef.black, 3);
+        builderAccHid.setSymbology(colorAccHid, core_common_1.ColorDef.black, 1, core_common_1.LinePixels.Code2);
+        const extents = this.iModel.projectExtents.cloneTranslated(core_geometry_1.Vector3d.createStartEnd(this._origin, this._current));
+        builderAccVis.addRangeBox(extents);
+        builderAccHid.addRangeBox(extents);
+        builderAccHid.addLineString([this._origin, this._current]);
+        context.addDecorationFromBuilder(builderAccVis);
+        context.addDecorationFromBuilder(builderAccHid);
+        deco.suspendGeolocationDecorations = true;
+    }
+    async onKeyTransition(wentDown, keyEvent) {
+        if (core_frontend_1.EventHandled.Yes === await super.onKeyTransition(wentDown, keyEvent))
+            return core_frontend_1.EventHandled.Yes;
+        return (wentDown && await core_frontend_1.AccuDrawShortcuts.processShortcutKey(keyEvent)) ? core_frontend_1.EventHandled.Yes : core_frontend_1.EventHandled.No;
+    }
+    async onMouseMotion(ev) {
+        if (undefined === ev.viewport)
+            return;
+        this._current = ev.point;
+        ev.viewport.invalidateDecorations();
+    }
+    async onResetButtonUp(_ev) {
+        if (undefined === this._origin)
+            await this.exitTool(); // exit to select tool if we haven't gotten first point...
+        else
+            await this.onReinitialize(); // Calls onRestartTool...
+        return core_frontend_1.EventHandled.No;
+    }
+    async onDataButtonDown(ev) {
+        if (undefined === ev.viewport)
+            return core_frontend_1.EventHandled.No; // Shouldn't really happen...
+        if (undefined === this._origin) {
+            this._origin = ev.point.clone();
+            this.setupAndPromptForNextAction();
+            return core_frontend_1.EventHandled.No;
+        }
+        await this.acceptOffset(ev);
+        return core_frontend_1.EventHandled.No;
+    }
+    async onInstall() { return ProjectExtentsDecoration_1.ProjectExtentsClipDecoration.allowEcefLocationChange(true); }
+    static async startTool() { return new ProjectGeolocationMoveTool().run(); }
+}
+exports.ProjectGeolocationMoveTool = ProjectGeolocationMoveTool;
+ProjectGeolocationMoveTool.toolId = "ProjectLocation.Geolocation.Move";
+ProjectGeolocationMoveTool.iconSpec = "icon-move"; // <== Tool button should use whatever icon you have here...
 //# sourceMappingURL=ProjectGeolocation.js.map