@itwin/ecschema-rpcinterface-tests 5.11.2 → 5.12.0-dev.10

package/lib/dist/bundled-tests.js

@@ -80193,9 +80193,7 @@ class AccuDraw {
             if (point.y < 0.0)
                 adjustment = -adjustment;
             angle += adjustment; // This is the angle measured from design x...
-            angle = (Math.PI / 2) - angle; // Account for bearing direction convention...
-            if (angle < 0)
-                angle = (Math.PI * 2) + angle; // Negative bearings aren't valid?
+            // core-quantity now applies the north-measured conversion itself (#9465); don't do it here too.
         }
         const formatterSpec = this.getAngleFormatter();
         let formattedValue = angle.toString();
@@ -80235,10 +80233,8 @@ class AccuDraw {
             case ItemField.ANGLE_Item:
                 parseResult = this.stringToAngle(input);
                 if (_itwin_core_quantity__WEBPACK_IMPORTED_MODULE_13__.Parser.isParsedQuantity(parseResult)) {
-                    if (this.isBearingMode && this.flags.bearingFixToPlane2D)
-                        this._angle = (Math.PI / 2) - parseResult.value;
-                    else
-                        this._angle = parseResult.value;
+                    // core-quantity's Parser applies the north-measured conversion itself now (#9465).
+                    this._angle = parseResult.value;
                     break;
                 }
                 return _itwin_core_bentley__WEBPACK_IMPORTED_MODULE_0__.BentleyStatus.ERROR;
@@ -101471,11 +101467,10 @@ class ViewState extends _EntityState__WEBPACK_IMPORTED_MODULE_5__.ElementState {
         origin.setFrom(vp.view.isSpatialView() ? vp.view.iModel.globalOrigin : _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Point3d.create());
         switch (orientation) {
             case _itwin_core_common__WEBPACK_IMPORTED_MODULE_2__.GridOrientationType.View: {
-                const centerWorld = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Point3d.create(0.5, 0.5, 0.5);
-                vp.npcToWorld(centerWorld, centerWorld);
+                const center = vp.npcToView(_itwin_core_common__WEBPACK_IMPORTED_MODULE_2__.NpcCenter);
                 rMatrix.setFrom(vp.rotation);
-                rMatrix.multiplyXYZtoXYZ(origin, origin);
-                origin.z = centerWorld.z;
+                rMatrix.multiplyVectorInPlace(origin);
+                origin.z = center.z;
                 rMatrix.multiplyTransposeVectorInPlace(origin);
                 break;
             }
@@ -105214,11 +105209,11 @@ class Viewport {
             origin.setFrom(this.iModel.globalOrigin);
         switch (this.view.getGridOrientation()) {
             case _itwin_core_common__WEBPACK_IMPORTED_MODULE_2__.GridOrientationType.View: {
-                const center = this.view.getCenter();
-                this.toViewOrientation(center);
-                this.toViewOrientation(origin);
+                const center = this.npcToView(_itwin_core_common__WEBPACK_IMPORTED_MODULE_2__.NpcCenter);
+                rMatrix.setFrom(this.rotation);
+                rMatrix.multiplyVectorInPlace(origin);
                 origin.z = center.z;
-                this.fromViewOrientation(origin);
+                rMatrix.multiplyTransposeVectorInPlace(origin);
                 break;
             }
             case _itwin_core_common__WEBPACK_IMPORTED_MODULE_2__.GridOrientationType.WorldXY:
@@ -105242,24 +105237,24 @@ class Viewport {
             eyeVec = this._viewingSpace.rotation.getRow(2);
         eyeVec.normalizeInPlace();
         (0,_LinePlaneIntersect__WEBPACK_IMPORTED_MODULE_12__.linePlaneIntersect)(point, point, eyeVec, origin, planeNormal, false);
-        // // get origin and point in view coordinate system
-        const pointView = point.clone();
-        const originView = origin.clone();
-        this.toViewOrientation(pointView);
-        this.toViewOrientation(originView);
+        // Get origin and point in the grid's local coordinate system.
+        const pointGrid = point.clone();
+        const originGrid = origin.clone();
+        rMatrix.multiplyXYZtoXYZ(pointGrid, pointGrid);
+        rMatrix.multiplyXYZtoXYZ(originGrid, originGrid);
         // subtract off the origin
-        pointView.y -= originView.y;
-        pointView.x -= originView.x;
+        pointGrid.y -= originGrid.y;
+        pointGrid.x -= originGrid.x;
         // round off the remainder to the grid distances
         const gridSpacing = this.view.getGridSpacing();
-        pointView.x = Viewport.roundGrid(pointView.x, gridSpacing.x);
-        pointView.y = Viewport.roundGrid(pointView.y, gridSpacing.y);
+        pointGrid.x = Viewport.roundGrid(pointGrid.x, gridSpacing.x);
+        pointGrid.y = Viewport.roundGrid(pointGrid.y, gridSpacing.y);
         // add the origin back in
-        pointView.x += originView.x;
-        pointView.y += originView.y;
+        pointGrid.x += originGrid.x;
+        pointGrid.y += originGrid.y;
         // go back to root coordinate system
-        this.fromViewOrientation(pointView);
-        point.setFrom(pointView);
+        rMatrix.multiplyTransposeVectorInPlace(pointGrid);
+        point.setFrom(pointGrid);
     }
     /** @internal */
     pointToGrid(point) {
@@ -114703,6 +114698,7 @@ __webpack_require__.r(__webpack_exports__);
 /* harmony export */   AccuDrawRotateCycleTool: () => (/* reexport safe */ _tools_AccuDrawTool__WEBPACK_IMPORTED_MODULE_102__.AccuDrawRotateCycleTool),
 /* harmony export */   AccuDrawRotateElementTool: () => (/* reexport safe */ _tools_AccuDrawTool__WEBPACK_IMPORTED_MODULE_102__.AccuDrawRotateElementTool),
 /* harmony export */   AccuDrawRotateFrontTool: () => (/* reexport safe */ _tools_AccuDrawTool__WEBPACK_IMPORTED_MODULE_102__.AccuDrawRotateFrontTool),
+/* harmony export */   AccuDrawRotatePointsTool: () => (/* reexport safe */ _tools_AccuDrawTool__WEBPACK_IMPORTED_MODULE_102__.AccuDrawRotatePointsTool),
 /* harmony export */   AccuDrawRotateSideTool: () => (/* reexport safe */ _tools_AccuDrawTool__WEBPACK_IMPORTED_MODULE_102__.AccuDrawRotateSideTool),
 /* harmony export */   AccuDrawRotateTopTool: () => (/* reexport safe */ _tools_AccuDrawTool__WEBPACK_IMPORTED_MODULE_102__.AccuDrawRotateTopTool),
 /* harmony export */   AccuDrawRotateViewTool: () => (/* reexport safe */ _tools_AccuDrawTool__WEBPACK_IMPORTED_MODULE_102__.AccuDrawRotateViewTool),
@@ -177082,8 +177078,10 @@ class AccuDrawShortcutInputCollector extends _Tool__WEBPACK_IMPORTED_MODULE_2__.
         _IModelApp__WEBPACK_IMPORTED_MODULE_1__.IModelApp.accuDraw.requestInputFocus(); // re-grab focus when auto-focus tool setting set...
     }
     async onDataButtonDown(ev) {
-        if (this._impl.doDataButtonDown(ev))
+        if (this._impl.doDataButtonDown(ev)) {
+            _IModelApp__WEBPACK_IMPORTED_MODULE_1__.IModelApp.accuDraw.processHints(); // Process pending hints pre-exit so they don't override savedState "ignoreFlags"...
             await this.exitTool();
+        }
         return _Tool__WEBPACK_IMPORTED_MODULE_2__.EventHandled.No;
     }
     async onUnsuspend() {
@@ -177121,8 +177119,10 @@ class AccuDrawShortcutViewTool extends _ViewTool__WEBPACK_IMPORTED_MODULE_3__.Vi
         _IModelApp__WEBPACK_IMPORTED_MODULE_1__.IModelApp.accuDraw.requestInputFocus(); // re-grab focus when auto-focus tool setting set...
     }
     async onDataButtonDown(ev) {
-        if (this._impl.doDataButtonDown(ev))
+        if (this._impl.doDataButtonDown(ev)) {
+            _IModelApp__WEBPACK_IMPORTED_MODULE_1__.IModelApp.accuDraw.processHints(); // Process pending hints pre-exit so they don't override savedState "ignoreFlags"...
             await this.exitTool();
+        }
         return _Tool__WEBPACK_IMPORTED_MODULE_2__.EventHandled.No;
     }
     async onUnsuspend() {
@@ -177169,6 +177169,7 @@ __webpack_require__.r(__webpack_exports__);
 /* harmony export */   AccuDrawRotateCycleTool: () => (/* binding */ AccuDrawRotateCycleTool),
 /* harmony export */   AccuDrawRotateElementTool: () => (/* binding */ AccuDrawRotateElementTool),
 /* harmony export */   AccuDrawRotateFrontTool: () => (/* binding */ AccuDrawRotateFrontTool),
+/* harmony export */   AccuDrawRotatePointsTool: () => (/* binding */ AccuDrawRotatePointsTool),
 /* harmony export */   AccuDrawRotateSideTool: () => (/* binding */ AccuDrawRotateSideTool),
 /* harmony export */   AccuDrawRotateTopTool: () => (/* binding */ AccuDrawRotateTopTool),
 /* harmony export */   AccuDrawRotateViewTool: () => (/* binding */ AccuDrawRotateViewTool),
@@ -177194,6 +177195,7 @@ __webpack_require__.r(__webpack_exports__);
 /* harmony import */ var _IModelApp__WEBPACK_IMPORTED_MODULE_5__ = __webpack_require__(/*! ../IModelApp */ "../../core/frontend/lib/esm/IModelApp.js");
 /* harmony import */ var _Tool__WEBPACK_IMPORTED_MODULE_6__ = __webpack_require__(/*! ./Tool */ "../../core/frontend/lib/esm/tools/Tool.js");
 /* harmony import */ var _AccuDrawShortcutTool__WEBPACK_IMPORTED_MODULE_7__ = __webpack_require__(/*! ./AccuDrawShortcutTool */ "../../core/frontend/lib/esm/tools/AccuDrawShortcutTool.js");
+/* harmony import */ var _common_render_GraphicType__WEBPACK_IMPORTED_MODULE_8__ = __webpack_require__(/*! ../common/render/GraphicType */ "../../core/frontend/lib/esm/common/render/GraphicType.js");
 /*---------------------------------------------------------------------------------------------
 * Copyright (c) Bentley Systems, Incorporated. All rights reserved.
 * See LICENSE.md in the project root for license terms and full copyright notice.
@@ -177209,6 +177211,7 @@ __webpack_require__.r(__webpack_exports__);
 
 
 
+
 // cSpell:ignore dont unlockedz
 function normalizedDifference(point1, point2, out) {
     return point2.vectorTo(point1).normalizeWithLength(out).mag;
@@ -177271,15 +177274,13 @@ class AccuDrawShortcuts {
     }
     static updateACSByPoints(acs, vp, points, isDynamics) {
         const accudraw = _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw;
-        if (!accudraw.isEnabled)
-            return false;
         let accept = false;
         const vec = [new _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Vector3d(), new _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Vector3d(), new _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Vector3d()];
         acs.setOrigin(points[0]);
         switch (points.length) {
             case 1:
                 acs.setRotation(vp.rotation);
-                if (!isDynamics) {
+                if (!isDynamics && accudraw.isEnabled) {
                     accudraw.published.origin.setFrom(points[0]);
                     accudraw.published.flags = _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetOrigin;
                     accudraw.flags.fixedOrg = true;
@@ -177291,7 +177292,7 @@ class AccuDrawShortcuts {
                     break;
                 }
                 if (vp.view.is3d()) {
-                    if (normalizedCrossProduct(accudraw.axes.y, vec[0], vec[1]) < 0.00001) {
+                    if (accudraw.isEnabled && normalizedCrossProduct(accudraw.axes.y, vec[0], vec[1]) < 0.00001) {
                         vec[2].set(0.0, 0.0, 1.0);
                         if (normalizedCrossProduct(vec[2], vec[0], vec[1]) < 0.00001) {
                             vec[2].set(0.0, 1.0, 0.0);
@@ -177300,7 +177301,7 @@ class AccuDrawShortcuts {
                     }
                     normalizedCrossProduct(vec[0], vec[1], vec[2]);
                     acs.setRotation(_itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Matrix3d.createRows(vec[0], vec[1], vec[2]));
-                    if (!isDynamics) {
+                    if (!isDynamics && accudraw.isEnabled) {
                         accudraw.published.origin.setFrom(points[0]);
                         accudraw.published.flags = _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetOrigin | _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetNormal;
                         accudraw.published.vector.setFrom(vec[0]);
@@ -178021,7 +178022,11 @@ class AccuDrawShortcuts {
             accudraw.unlockAllFields();
     }
 }
-/** @beta */
+/**
+ * Immediate tool to toggle AccuDraw's availability for the current session.
+ * @note AccuDraw is enabled by default
+ * @beta
+ */
 class AccuDrawSessionToggleTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.SessionToggle";
     async run() {
@@ -178029,7 +178034,11 @@ class AccuDrawSessionToggleTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to toggle AccuDraw on/off temporarily for the current interactive tool.
+ * @note Typically used to disable AccuDraw for a single data button.
+ * @beta
+ */
 class AccuDrawSuspendToggleTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.SuspendToggle";
     async run() {
@@ -178037,7 +178046,11 @@ class AccuDrawSuspendToggleTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to enable AccuDraw and position it at the current AccuSnap or Tentative snap location.
+ * @note When not snapped, AccuDraw is activated at the last data button location when inactive, or moved to the current cursor location when active.
+ * @beta
+ */
 class AccuDrawSetOriginTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.SetOrigin";
     async run() {
@@ -178045,7 +178058,11 @@ class AccuDrawSetOriginTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to lock the closer of the x or y axis based on the current cursor location.
+ * @note When an axis is locked, points are projected onto the axis line.
+ * @beta
+ */
 class AccuDrawSetLockSmartTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.LockSmart";
     async run() {
@@ -178053,7 +178070,10 @@ class AccuDrawSetLockSmartTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to toggle the locked state of an indexed axis of the AccuDraw compass.
+ * @beta
+ */
 class AccuDrawSetLockIndexTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.LockIndex";
     async run() {
@@ -178061,7 +178081,10 @@ class AccuDrawSetLockIndexTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to toggle the locked state of the X text field.
+ * @beta
+ */
 class AccuDrawSetLockXTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.LockX";
     async run() {
@@ -178069,7 +178092,10 @@ class AccuDrawSetLockXTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to toggle the locked state of the Y text field.
+ * @beta
+ */
 class AccuDrawSetLockYTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.LockY";
     async run() {
@@ -178077,7 +178103,10 @@ class AccuDrawSetLockYTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to toggle the locked state of the Z text field.
+ * @beta
+ */
 class AccuDrawSetLockZTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.LockZ";
     async run() {
@@ -178085,7 +178114,10 @@ class AccuDrawSetLockZTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to toggle the locked state of the Distance text field.
+ * @beta
+ */
 class AccuDrawSetLockDistanceTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.LockDistance";
     async run() {
@@ -178093,7 +178125,10 @@ class AccuDrawSetLockDistanceTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Too
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to toggle the locked state of the Angle text field.
+ * @beta
+ */
 class AccuDrawSetLockAngleTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.LockAngle";
     async run() {
@@ -178101,7 +178136,10 @@ class AccuDrawSetLockAngleTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to toggle between polar and rectangular compass modes.
+ * @beta
+ */
 class AccuDrawChangeModeTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.ChangeMode";
     async run() {
@@ -178109,7 +178147,10 @@ class AccuDrawChangeModeTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to cycle between XY, XZ, and YZ planes for the current AccuDraw rotation.
+ * @beta
+ */
 class AccuDrawRotateCycleTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.RotateCycle";
     async run() {
@@ -178117,7 +178158,11 @@ class AccuDrawRotateCycleTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to set the AccuDraw rotation to a standard Top view.
+ * @note When IModelApp.toolAdmin.acsContextLock is true, rotation is set relative to the view's ACS.
+ * @beta
+ */
 class AccuDrawRotateTopTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.RotateTop";
     async run() {
@@ -178125,7 +178170,11 @@ class AccuDrawRotateTopTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to set the AccuDraw rotation to a standard Front view.
+ * @note When IModelApp.toolAdmin.acsContextLock is true, rotation is set relative to the view's ACS.
+ * @beta
+ */
 class AccuDrawRotateFrontTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.RotateFront";
     async run() {
@@ -178133,7 +178182,11 @@ class AccuDrawRotateFrontTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to set the AccuDraw rotation to a standard Side view.
+ * @note When IModelApp.toolAdmin.acsContextLock is true, rotation is set relative to the view's ACS.
+ * @beta
+ */
 class AccuDrawRotateSideTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.RotateSide";
     async run() {
@@ -178141,7 +178194,10 @@ class AccuDrawRotateSideTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to set the AccuDraw rotation to match the rotation of the current view.
+ * @beta
+ */
 class AccuDrawRotateViewTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.RotateView";
     async run() {
@@ -178149,7 +178205,10 @@ class AccuDrawRotateViewTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to set the AccuDraw rotation to be a 90 degree rotation about the current x axis.
+ * @beta
+ */
 class AccuDrawRotate90AboutXTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.Rotate90AboutX";
     async run() {
@@ -178157,7 +178216,10 @@ class AccuDrawRotate90AboutXTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to set the AccuDraw rotation to be a 90 degree rotation about the current y axis.
+ * @beta
+ */
 class AccuDrawRotate90AboutYTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.Rotate90AboutY";
     async run() {
@@ -178165,7 +178227,10 @@ class AccuDrawRotate90AboutYTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool
         return true;
     }
 }
-/** @beta */
+/**
+ * Immediate tool to set the AccuDraw rotation to be a 90 degree rotation about the current z axis.
+ * @beta
+ */
 class AccuDrawRotate90AboutZTool extends _Tool__WEBPACK_IMPORTED_MODULE_6__.Tool {
     static toolId = "AccuDraw.Rotate90AboutZ";
     async run() {
@@ -178211,7 +178276,11 @@ class RotateAxesImplementation extends _AccuDrawShortcutTool__WEBPACK_IMPORTED_M
         return true;
     }
 }
-/** @beta */
+/**
+ * Interactive tool to set the AccuDraw rotation by rotating about the current z axis to a point on the x axis.
+ * @note When AccuSnap or Tentative snap is active, the snap point is immediately used to define the x axis and not further input is required.
+ * @beta
+ */
 class AccuDrawRotateAxesTool extends _AccuDrawShortcutTool__WEBPACK_IMPORTED_MODULE_7__.AccuDrawShortcutTool {
     aboutCurrentZ;
     static toolId = "AccuDraw.RotateAxes";
@@ -178276,7 +178345,10 @@ class RotateElementImplementation extends _AccuDrawShortcutTool__WEBPACK_IMPORTE
         return true;
     }
 }
-/** @beta */
+/**
+ * Interactive tool to set the AccuDraw rotation using the snapped to geometry under the cursor.
+ * @beta
+ */
 class AccuDrawRotateElementTool extends _AccuDrawShortcutTool__WEBPACK_IMPORTED_MODULE_7__.AccuDrawShortcutTool {
     static toolId = "AccuDraw.RotateElement";
     /** @internal */
@@ -178285,6 +178357,124 @@ class AccuDrawRotateElementTool extends _AccuDrawShortcutTool__WEBPACK_IMPORTED_
     }
 }
 /** @internal */
+class RotatePointsImplementation extends _AccuDrawShortcutTool__WEBPACK_IMPORTED_MODULE_7__.AccuDrawShortcutImplementation {
+    _points = [];
+    _origin = _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.tentativePoint.isActive ? _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.tentativePoint.getPoint().clone() : undefined;
+    _moveOrigin = !_IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw.isActive || _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.tentativePoint.isActive; // Preserve current origin if AccuDraw already active and not tentative snap...
+    _lastPoint;
+    onProvideToolAssistance() {
+        switch (this._points.length) {
+            case 0:
+                _Tool__WEBPACK_IMPORTED_MODULE_6__.CoreTools.outputPromptByKey("AccuDraw.RotatePoints.Prompts.FirstPoint");
+                break;
+            case 1:
+                _Tool__WEBPACK_IMPORTED_MODULE_6__.CoreTools.outputPromptByKey("AccuDraw.RotatePoints.Prompts.SecondPoint");
+                break;
+            default:
+                _Tool__WEBPACK_IMPORTED_MODULE_6__.CoreTools.outputPromptByKey("AccuDraw.RotatePoints.Prompts.NextPoint");
+                break;
+        }
+    }
+    onInitialize() {
+        if (undefined === this._origin)
+            return;
+        this._points.push(this._origin);
+        _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.tentativePoint.clear(true); // Necessary when installed as an InputCollector...
+        _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw.activate();
+        _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw.setContext(_AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetOrigin | _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.FixedOrigin, this._origin);
+        _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw.refreshDecorationsAndDynamics();
+    }
+    onComplete() {
+        let ignoreFlags = _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetRMatrix | _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.Disable; // If AccuDraw wasn't active when the shortcut started, let it remain active for suspended tool when shortcut completes...
+        if (this._moveOrigin)
+            ignoreFlags |= _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetOrigin;
+        return ignoreFlags;
+    }
+    doManipulation(ev, isMotion) {
+        if (!ev || !ev.viewport)
+            return false;
+        _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.viewManager.invalidateDecorationsAllViews();
+        if (isMotion) {
+            this._lastPoint = ev.point.clone();
+            return false;
+        }
+        const accuDraw = _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw;
+        accuDraw.activate();
+        switch (this._points.length) {
+            case 0: {
+                this._points.push(ev.point.clone());
+                accuDraw.setContext(_AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetOrigin | _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.FixedOrigin, this._points[0]);
+                break;
+            }
+            case 1: {
+                const xVec = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Vector3d.createNormalizedStartEnd(this._points[0], ev.point);
+                if (undefined === xVec)
+                    return false;
+                if (!ev.viewport.view.is3d() || !ev.viewport.view.allow3dManipulations()) {
+                    accuDraw.setContext(_AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetOrigin | _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetXAxis, this._points[0], xVec);
+                    return true; // Complete
+                }
+                this._points.push(ev.point.clone());
+                accuDraw.setContext(_AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetOrigin | _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.FixedOrigin | _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetNormal, this._points[0], xVec);
+                break;
+            }
+            case 2: {
+                const xVec = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Vector3d.createNormalizedStartEnd(this._points[0], this._points[1]);
+                if (undefined === xVec)
+                    return false;
+                const yVec = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Vector3d.createNormalizedStartEnd(this._points[0], ev.point);
+                if (undefined === yVec)
+                    return false;
+                const matrix = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Matrix3d.createRigidFromColumns(xVec, yVec, _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.AxisOrder.XYZ);
+                if (undefined === matrix)
+                    return false;
+                const invMatrix = matrix.inverse();
+                if (undefined === invMatrix)
+                    return false;
+                accuDraw.setContext(_AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetOrigin | _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetRMatrix, this._points[0], invMatrix);
+                return true; // Complete
+            }
+        }
+        this.onProvideToolAssistance();
+        return false;
+    }
+    doDecorate(context) {
+        if (0 === this._points.length)
+            return;
+        const currentPoint = this._lastPoint;
+        if (undefined === currentPoint)
+            return;
+        if (2 === this._points.length) {
+            const xVec = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Vector3d.createNormalizedStartEnd(this._points[0], this._points[1]);
+            if (undefined === xVec)
+                return;
+            const plane = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Plane3dByOriginAndUnitNormal.create(this._points[0], xVec);
+            if (undefined === plane)
+                return;
+            plane.projectPointToPlane(currentPoint, currentPoint);
+        }
+        const tmpPoints = this._points.slice(0, 1);
+        tmpPoints.push(currentPoint);
+        const vp = context.viewport;
+        const color = vp.getContrastToBackgroundColor();
+        const builder = context.createGraphicBuilder(_common_render_GraphicType__WEBPACK_IMPORTED_MODULE_8__.GraphicType.WorldOverlay);
+        builder.setSymbology(color, color, 2);
+        builder.addLineString(tmpPoints);
+        context.addDecorationFromBuilder(builder);
+    }
+}
+/**
+ * Interactive tool to set the AccuDraw rotation by 3 points: x axis origin, x axis direction, and y axis direction.
+ * @beta
+ */
+class AccuDrawRotatePointsTool extends _AccuDrawShortcutTool__WEBPACK_IMPORTED_MODULE_7__.AccuDrawShortcutTool {
+    static toolId = "AccuDraw.RotatePoints";
+    /** @internal */
+    createImplementation() {
+        return new RotatePointsImplementation();
+    }
+}
+/** @internal */
 class DefineACSByElementImplementation extends _AccuDrawShortcutTool__WEBPACK_IMPORTED_MODULE_7__.AccuDrawShortcutImplementation {
     _origin = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Point3d.create();
     _rMatrix = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Matrix3d.createIdentity();
@@ -178327,7 +178517,10 @@ class DefineACSByElementImplementation extends _AccuDrawShortcutTool__WEBPACK_IM
         this._acs.display(context, _AuxCoordSys__WEBPACK_IMPORTED_MODULE_4__.ACSDisplayOptions.Active | _AuxCoordSys__WEBPACK_IMPORTED_MODULE_4__.ACSDisplayOptions.Dynamics);
     }
 }
-/** @beta */
+/**
+ * Interactive tool to set the view's ACS rotation by 3 points: x axis origin, x axis direction, and y axis direction/
+ * @beta
+ */
 class DefineACSByElementTool extends _AccuDrawShortcutTool__WEBPACK_IMPORTED_MODULE_7__.AccuDrawShortcutTool {
     static toolId = "AccuDraw.DefineACSByElement";
     /** @internal */
@@ -178340,6 +178533,7 @@ class DefineACSByPointsImplementation extends _AccuDrawShortcutTool__WEBPACK_IMP
     _points = [];
     _acs;
     _origin = _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.tentativePoint.isActive ? _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.tentativePoint.getPoint().clone() : undefined;
+    _lastPoint;
     onProvideToolAssistance() {
         switch (this._points.length) {
             case 0:
@@ -178356,16 +178550,20 @@ class DefineACSByPointsImplementation extends _AccuDrawShortcutTool__WEBPACK_IMP
     onInitialize() {
         if (undefined === this._origin)
             return;
-        _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw.setContext(_AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetOrigin | _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.FixedOrigin, this._origin);
         this._points.push(this._origin);
         _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.tentativePoint.clear(true); // Necessary when installed as an InputCollector...
+        _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw.activate();
+        _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw.setContext(_AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.SetOrigin | _AccuDraw__WEBPACK_IMPORTED_MODULE_2__.AccuDrawFlags.FixedOrigin, this._origin);
+        _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw.refreshDecorationsAndDynamics();
     }
     doManipulation(ev, isMotion) {
         if (!ev || !ev.viewport)
             return false;
         _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.viewManager.invalidateDecorationsAllViews();
-        if (isMotion)
+        if (isMotion) {
+            this._lastPoint = ev.point.clone();
             return false;
+        }
         _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.accuDraw.activate();
         this._points.push(ev.point.clone());
         const vp = ev.viewport;
@@ -178380,11 +178578,11 @@ class DefineACSByPointsImplementation extends _AccuDrawShortcutTool__WEBPACK_IMP
         return false;
     }
     doDecorate(context) {
+        if (undefined === this._lastPoint)
+            return;
         const tmpPoints = [];
         this._points.forEach((pt) => tmpPoints.push(pt));
-        const ev = new _Tool__WEBPACK_IMPORTED_MODULE_6__.BeButtonEvent();
-        _IModelApp__WEBPACK_IMPORTED_MODULE_5__.IModelApp.toolAdmin.fillEventFromCursorLocation(ev);
-        tmpPoints.push(ev.point);
+        tmpPoints.push(this._lastPoint);
         const vp = context.viewport;
         if (!this._acs)
             this._acs = vp.view.auxiliaryCoordinateSystem.clone();
@@ -178392,7 +178590,10 @@ class DefineACSByPointsImplementation extends _AccuDrawShortcutTool__WEBPACK_IMP
         this._acs.display(context, _AuxCoordSys__WEBPACK_IMPORTED_MODULE_4__.ACSDisplayOptions.Active | _AuxCoordSys__WEBPACK_IMPORTED_MODULE_4__.ACSDisplayOptions.Dynamics);
     }
 }
-/** @beta */
+/**
+ * Interactive tool to set the view's ACS rotation by 3 points: x axis origin, x axis direction, and y axis direction.
+ * @beta
+ */
 class DefineACSByPointsTool extends _AccuDrawShortcutTool__WEBPACK_IMPORTED_MODULE_7__.AccuDrawShortcutTool {
     static toolId = "AccuDraw.DefineACSByPoints";
     /** @internal */
@@ -179743,8 +179944,8 @@ class ViewClipByPlaneTool extends ViewClipTool {
 class ViewClipByShapeTool extends ViewClipTool {
     static toolId = "ViewClip.ByShape";
     static iconSpec = "icon-section-shape";
-    /** @internal */
     _orientationValue = { value: _AccuDraw__WEBPACK_IMPORTED_MODULE_3__.ContextRotationId.Top };
+    _lastMotion;
     /** @internal */
     _points = [];
     /** @internal */
@@ -179878,9 +180079,8 @@ class ViewClipByShapeTool extends ViewClipTool {
     decorate(context) {
         if (context.viewport !== this.targetView)
             return;
-        const ev = new _Tool__WEBPACK_IMPORTED_MODULE_9__.BeButtonEvent();
-        _IModelApp__WEBPACK_IMPORTED_MODULE_6__.IModelApp.toolAdmin.fillEventFromCursorLocation(ev);
-        if (undefined === ev.viewport)
+        const ev = this._lastMotion;
+        if (undefined === ev?.viewport)
             return;
         const points = this.getClipPoints(ev);
         if (points.length < 2)
@@ -179901,6 +180101,7 @@ class ViewClipByShapeTool extends ViewClipTool {
     }
     /** @internal */
     async onMouseMotion(ev) {
+        this._lastMotion = ev;
         if (this._points.length > 0 && undefined !== ev.viewport)
             ev.viewport.invalidateDecorations();
     }
@@ -179950,6 +180151,7 @@ class ViewClipByShapeTool extends ViewClipTool {
 class ViewClipByRangeTool extends ViewClipTool {
     static toolId = "ViewClip.ByRange";
     static iconSpec = "icon-section-range";
+    _lastMotion;
     /** @internal */
     _corner;
     /** @internal */
@@ -179992,9 +180194,8 @@ class ViewClipByRangeTool extends ViewClipTool {
     decorate(context) {
         if (context.viewport !== this.targetView || undefined === this._corner)
             return;
-        const ev = new _Tool__WEBPACK_IMPORTED_MODULE_9__.BeButtonEvent();
-        _IModelApp__WEBPACK_IMPORTED_MODULE_6__.IModelApp.toolAdmin.fillEventFromCursorLocation(ev);
-        if (undefined === ev.viewport)
+        const ev = this._lastMotion;
+        if (undefined === ev?.viewport)
             return;
         const range = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Range3d.create();
         const transform = _itwin_core_geometry__WEBPACK_IMPORTED_MODULE_1__.Transform.createIdentity();
@@ -180013,6 +180214,7 @@ class ViewClipByRangeTool extends ViewClipTool {
     }
     /** @internal */
     async onMouseMotion(ev) {
+        this._lastMotion = ev;
         if (undefined !== this._corner && undefined !== ev.viewport)
             ev.viewport.invalidateDecorations();
     }
@@ -312281,11 +312483,19 @@ class BaseFormat {
     // default "north" is applied by the formatter (quarter rotation counter clockwise from east, the value depends on the units used)
     get azimuthBase() { return this._azimuthBase; }
     set azimuthBase(azimuthBase) { this._azimuthBase = azimuthBase; }
+    /**
+     * Must share the same phenomenon as the eventual persistence unit.
+     * @see FormatProps.azimuthBaseUnit
+     */
     get azimuthBaseUnit() { return this._azimuthBaseUnit; }
     set azimuthBaseUnit(azimuthBaseUnit) { this._azimuthBaseUnit = azimuthBaseUnit; }
     get azimuthCounterClockwise() { return this._azimuthCounterClockwise; }
     set azimuthCounterClockwise(azimuthCounterClockwise) { this._azimuthCounterClockwise = azimuthCounterClockwise; }
     get azimuthClockwiseOrDefault() { return !this._azimuthCounterClockwise; }
+    /**
+     * Must share the same phenomenon as the eventual persistence unit.
+     * @see FormatProps.revolutionUnit
+     */
     get revolutionUnit() { return this._revolutionUnit; }
     set revolutionUnit(revolutionUnit) { this._revolutionUnit = revolutionUnit; }
     /** This method parses input string that is typically extracted for persisted JSON data and validates that the string is a valid FormatType. Throws exception if not valid. */
@@ -313125,6 +313335,7 @@ __webpack_require__.r(__webpack_exports__);
 /* harmony import */ var _FormatterSpec__WEBPACK_IMPORTED_MODULE_2__ = __webpack_require__(/*! ./FormatterSpec */ "../../core/quantity/lib/esm/Formatter/FormatterSpec.js");
 /* harmony import */ var _FormatEnums__WEBPACK_IMPORTED_MODULE_3__ = __webpack_require__(/*! ./FormatEnums */ "../../core/quantity/lib/esm/Formatter/FormatEnums.js");
 /* harmony import */ var _Quantity__WEBPACK_IMPORTED_MODULE_4__ = __webpack_require__(/*! ../Quantity */ "../../core/quantity/lib/esm/Quantity.js");
+/* harmony import */ var _generated_Units_generated__WEBPACK_IMPORTED_MODULE_5__ = __webpack_require__(/*! ../generated/Units.generated */ "../../core/quantity/lib/esm/generated/Units.generated.js");
 /*---------------------------------------------------------------------------------------------
 * Copyright (c) Bentley Systems, Incorporated. All rights reserved.
 * See LICENSE.md in the project root for license terms and full copyright notice.
@@ -313137,6 +313348,7 @@ __webpack_require__.r(__webpack_exports__);
 
 
 
+
 /**  rounding additive
  * @internal
  */
@@ -313577,8 +313789,8 @@ class Formatter {
         if (type !== _FormatEnums__WEBPACK_IMPORTED_MODULE_3__.FormatType.Bearing && type !== _FormatEnums__WEBPACK_IMPORTED_MODULE_3__.FormatType.Azimuth)
             return { magnitude };
         const revolution = this.getRevolution(spec);
-        magnitude = this.normalizeAngle(magnitude, revolution);
         const quarterRevolution = revolution / 4;
+        magnitude = this.normalizeToAzimuth(magnitude, spec.persistenceUnit.phenomenon, revolution);
         if (type === _FormatEnums__WEBPACK_IMPORTED_MODULE_3__.FormatType.Bearing) {
             let quadrant = 0;
             while (magnitude > quarterRevolution) {
@@ -313647,6 +313859,17 @@ class Formatter {
             magnitude += revolution;
         return magnitude;
     }
+    /**
+     * Converts a raw magnitude to a normalized azimuth (0 to revolution, measured clockwise from north), based on
+     * the phenomenon it was persisted under. Raw math angles (`ANGLE` phenomenon) need the north-measured conversion;
+     * true azimuths (`HORIZONTAL_DIRECTION`) don't. Not a unit conversion, so it's applied here, not via `convertTo`.
+     * @internal
+     */
+    static normalizeToAzimuth(magnitude, phenomenon, revolution) {
+        if (phenomenon === _generated_Units_generated__WEBPACK_IMPORTED_MODULE_5__.Phenomena.ANGLE)
+            magnitude = revolution / 4 - magnitude;
+        return this.normalizeAngle(magnitude, revolution);
+    }
     static getRevolution(spec) {
         if (spec.revolutionConversion === undefined) {
             throw new _Exception__WEBPACK_IMPORTED_MODULE_1__.QuantityError(_Exception__WEBPACK_IMPORTED_MODULE_1__.QuantityStatus.MissingRequiredProperty, `Missing revolution unit conversion for calculating ${spec.name}'s revolution.`);
@@ -313910,6 +314133,9 @@ class FormatterSpec {
      *  @param name     The name of a format specification.
      *  @param unitsProvider The units provider is used to look up unit definitions and provide conversion information for converting between units.
      *  @param inputUnit The unit the value to be formatted. This unit is often referred to as persistence unit.
+     *  @note For Bearing/Azimuth formats, `inputUnit`'s phenomenon must match `format.azimuthBaseUnit`/`format.revolutionUnit`.
+     *  @see BaseFormat.azimuthBaseUnit
+     *  @see BaseFormat.revolutionUnit
      */
     static async create(name, format, unitsProvider, inputUnit) {
         const conversions = await FormatterSpec.getUnitConversions(format, unitsProvider, inputUnit);
@@ -314082,6 +314308,7 @@ __webpack_require__.r(__webpack_exports__);
 /* harmony import */ var _Formatter_FormatEnums__WEBPACK_IMPORTED_MODULE_3__ = __webpack_require__(/*! ./Formatter/FormatEnums */ "../../core/quantity/lib/esm/Formatter/FormatEnums.js");
 /* harmony import */ var _QuantityLoggerCategory__WEBPACK_IMPORTED_MODULE_4__ = __webpack_require__(/*! ./QuantityLoggerCategory */ "../../core/quantity/lib/esm/QuantityLoggerCategory.js");
 /* harmony import */ var _Quantity__WEBPACK_IMPORTED_MODULE_5__ = __webpack_require__(/*! ./Quantity */ "../../core/quantity/lib/esm/Quantity.js");
+/* harmony import */ var _generated_Units_generated__WEBPACK_IMPORTED_MODULE_6__ = __webpack_require__(/*! ./generated/Units.generated */ "../../core/quantity/lib/esm/generated/Units.generated.js");
 /*---------------------------------------------------------------------------------------------
 * Copyright (c) Bentley Systems, Incorporated. All rights reserved.
 * See LICENSE.md in the project root for license terms and full copyright notice.
@@ -314095,6 +314322,7 @@ __webpack_require__.r(__webpack_exports__);
 
 
 
+
 /** Possible parser errors
  * @beta
  */
@@ -314758,16 +314986,19 @@ class Parser {
         }
         return this.parseAndProcessTokens(inString, format, unitsConversions);
     }
-    /** The value of special direction is always in degrees, try to find the unit conversion for that. */
+    /** The value of special direction is always in degrees; resolve "degrees" relative to
+     * `spec.outUnit`'s phenomenon, since `Units.ARC_DEG` only exists in the `Units.ANGLE` family. */
     static processSpecialBearingDirection(mag, spec) {
-        const specialDirUnit = spec.unitConversions.find((unitConversion) => unitConversion.name === "Units.ARC_DEG");
+        const degreeUnitName = spec.outUnit.phenomenon === _generated_Units_generated__WEBPACK_IMPORTED_MODULE_6__.Phenomena.HORIZONTAL_DIRECTION ? "Units.HORIZONTAL_DIR_ARC_DEG" : "Units.ARC_DEG";
+        const specialDirUnit = spec.unitConversions.find((unitConversion) => unitConversion.name === degreeUnitName);
         if (!specialDirUnit)
             return { ok: false, error: ParseError.UnknownUnit };
         const preferredUnit = spec.outUnit;
         const conversion = this.tryFindUnitConversion(specialDirUnit.label, spec.unitConversions, preferredUnit);
         if (!conversion)
             return { ok: true, value: mag };
-        return { ok: true, value: (0,_Quantity__WEBPACK_IMPORTED_MODULE_5__.applyConversion)(mag, conversion) };
+        const revolution = this.getRevolution(spec);
+        return { ok: true, value: this.convertAzimuthToPersistenceConvention((0,_Quantity__WEBPACK_IMPORTED_MODULE_5__.applyConversion)(mag, conversion), spec, revolution) };
     }
     static parseBearingFormat(inString, spec) {
         const specialDirections = {
@@ -314844,6 +315075,7 @@ class Parser {
             }
         }
         magnitude = this.normalizeAngle(magnitude, revolution);
+        magnitude = this.convertAzimuthToPersistenceConvention(magnitude, spec, revolution);
         return { ok: true, value: magnitude };
     }
     static parseAzimuthFormat(inString, spec) {
@@ -314869,6 +315101,8 @@ class Parser {
         const inputIsClockwise = spec.format.azimuthClockwiseOrDefault;
         if (inputIsClockwise && azimuthBase === 0) {
             // parsed result already has the same base and orientation as our desired output
+            if (spec.outUnit.phenomenon === _generated_Units_generated__WEBPACK_IMPORTED_MODULE_6__.Phenomena.ANGLE)
+                return { ok: true, value: this.convertAzimuthToPersistenceConvention(magnitude, spec, revolution) };
             return parsedResult;
         }
         if (inputIsClockwise)
@@ -314876,6 +315110,7 @@ class Parser {
         else
             magnitude = azimuthBase - magnitude;
         magnitude = this.normalizeAngle(magnitude, revolution);
+        magnitude = this.convertAzimuthToPersistenceConvention(magnitude, spec, revolution);
         return { ok: true, value: magnitude };
     }
     /**
@@ -315017,6 +315252,15 @@ class Parser {
         }
         return converted.magnitude;
     }
+    /** Converts an azimuth-convention magnitude back to a raw math angle when `spec.outUnit` is
+     * `ANGLE`-phenomenon (mirrors the transform in `Formatter.processBearingAndAzimuth`). No-op for
+     * `HORIZONTAL_DIRECTION`, which is already a true azimuth. */
+    static convertAzimuthToPersistenceConvention(magnitude, spec, revolution) {
+        if (spec.outUnit.phenomenon !== _generated_Units_generated__WEBPACK_IMPORTED_MODULE_6__.Phenomena.ANGLE)
+            return magnitude;
+        const quarterRevolution = revolution / 4;
+        return this.normalizeAngle(quarterRevolution - magnitude, revolution);
+    }
     static parseAndProcessTokens(inString, format, unitsConversions) {
         const tokens = Parser.parseQuantitySpecification(inString, format);
         if (Parser._log) {
@@ -315217,6 +315461,9 @@ class ParserSpec {
      *  @param format     The format specification.
      *  @param unitsProvider The units provider is used to look up unit definitions and provide conversion information for converting between units.
      *  @param outUnit The unit a value will be formatted to. This unit is often referred to as persistence unit.
+     *  @note For Bearing/Azimuth formats, `outUnit`'s phenomenon must match `format.azimuthBaseUnit`/`format.revolutionUnit`.
+     *  @see BaseFormat.azimuthBaseUnit
+     *  @see BaseFormat.revolutionUnit
      */
     static async create(format, unitsProvider, outUnit, altUnitLabelsProvider) {
         let conversions;
@@ -332798,7 +333045,7 @@ var loadLanguages = instance.loadLanguages;
 /***/ ((module) => {
 
 "use strict";
-module.exports = /*#__PURE__*/JSON.parse('{"name":"@itwin/core-frontend","version":"5.11.2","description":"iTwin.js frontend components","main":"lib/cjs/core-frontend.js","module":"lib/esm/core-frontend.js","typings":"lib/cjs/core-frontend","license":"MIT","scripts":{"build":"npm run -s copy:public && npm run -s build:cjs && npm run -s build:esm && npm run -s webpackWorkers && npm run -s copy:workers && npm run -s copy:draco","build:cjs":"npm run -s copy:js:cjs && tsc 1>&2 --outDir lib/cjs","build:esm":"npm run -s copy:js:esm && tsc 1>&2 --module ES2022 --outDir lib/esm","clean":"rimraf -g lib .rush/temp/package-deps*.json","copy:public":"cpx \\"./src/public/**/*\\" ./lib/public","copy:js:cjs":"cpx \\"./src/**/*.js\\" ./lib/cjs","copy:js:esm":"cpx \\"./src/**/*.js\\" ./lib/esm","copy:workers":"cpx \\"./lib/workers/webpack/parse-imdl-worker.js\\" ./lib/public/scripts","copy:draco":"cpx \\"./node_modules/@loaders.gl/draco/dist/libs/*\\" ./lib/public/scripts","docs":"betools docs --json=../../generated-docs/core/core-frontend/file.json --tsIndexFile=./core-frontend.ts --onlyJson --excludes=webgl/**/*,**/map/*.d.ts,**/tile/*.d.ts,**/*-css.ts && npm run -s extract","extract":"betools extract --fileExt=ts --extractFrom=./src/test/example-code --recursive --out=../../generated-docs/extract","extract-api":"betools extract-api --entry=core-frontend && npm run extract-extension-api","extract-extension-api":"eslint --no-inline-config -c extraction.eslint.config.js  \\"./src/**/*.ts\\" 1>&2","lint":"eslint \\"./src/**/*.ts\\" 1>&2","lint-fix":"eslint --fix -f visualstudio \\"./src/**/*.ts\\" 1>&2","lint-deprecation":"eslint --fix -f visualstudio --no-inline-config -c ../../common/config/eslint/eslint.config.deprecation-policy.js \\"./src/**/*.ts\\"","pseudolocalize":"betools pseudolocalize --englishDir ./src/public/locales/en --out ./public/locales/en-PSEUDO","test":"npm run webpackTestWorker && vitest --run","cover":"npm run webpackTestWorker && vitest --run","webpackTests":"webpack --config ./src/test/utils/webpack.config.js 1>&2 && npm run -s webpackTestWorker","webpackTestWorker":"webpack --config ./src/test/worker/webpack.config.js 1>&2 && cpx \\"./lib/test/test-worker.js\\" ./lib/test","webpackWorkers":"webpack --config ./src/workers/ImdlParser/webpack.config.js 1>&2"},"repository":{"type":"git","url":"https://github.com/iTwin/itwinjs-core.git","directory":"core/frontend"},"keywords":["Bentley","BIM","iModel","digital-twin","iTwin"],"author":{"name":"Bentley Systems, Inc.","url":"http://www.bentley.com"},"peerDependencies":{"@itwin/appui-abstract":"workspace:*","@itwin/core-bentley":"workspace:*","@itwin/core-common":"workspace:*","@itwin/core-geometry":"workspace:*","@itwin/core-orbitgt":"workspace:*","@itwin/core-quantity":"workspace:*","@itwin/ecschema-metadata":"workspace:*","@itwin/ecschema-rpcinterface-common":"workspace:*"},"//devDependencies":["NOTE: All peerDependencies should also be listed as devDependencies since peerDependencies are not considered by npm install","NOTE: All tools used by scripts in this package must be listed as devDependencies"],"devDependencies":{"@bentley/aec-units-schema":"^1.0.3","@bentley/formats-schema":"^1.0.0","@bentley/units-schema":"^1.0.10","@itwin/appui-abstract":"workspace:*","@itwin/build-tools":"workspace:*","@itwin/core-bentley":"workspace:*","@itwin/core-common":"workspace:*","@itwin/core-geometry":"workspace:*","@itwin/core-orbitgt":"workspace:*","@itwin/core-quantity":"workspace:*","@itwin/ecschema-metadata":"workspace:*","@itwin/ecschema-rpcinterface-common":"workspace:*","@itwin/object-storage-core":"^3.0.4","@itwin/eslint-plugin":"^6.0.0","@types/chai-as-promised":"^7","@types/draco3d":"^1.4.10","@types/node":"~20.17.0","@types/sinon":"^17.0.2","@vitest/browser-playwright":"^4.1.8","@vitest/coverage-v8":"^4.1.8","cpx2":"^8.0.0","eslint":"^9.31.0","glob":"^10.5.0","playwright":"~1.56.1","rimraf":"^6.0.1","sinon":"^17.0.2","source-map-loader":"^5.0.0","typescript":"~5.6.2","vitest":"^4.1.8","vite-multiple-assets":"^1.3.1","vite-plugin-static-copy":"2.2.0","webpack":"^5.97.1"},"//dependencies":["NOTE: these dependencies should be only for things that DO NOT APPEAR IN THE API","NOTE: core-frontend should remain UI technology agnostic, so no react/angular dependencies are allowed"],"dependencies":{"@itwin/core-i18n":"workspace:*","@itwin/webgl-compatibility":"workspace:*","@loaders.gl/core":"~4.3.4","@loaders.gl/draco":"~4.3.4","fuse.js":"^3.3.0","wms-capabilities":"0.4.0"}}');
+module.exports = /*#__PURE__*/JSON.parse('{"name":"@itwin/core-frontend","version":"5.12.0-dev.10","description":"iTwin.js frontend components","main":"lib/cjs/core-frontend.js","module":"lib/esm/core-frontend.js","typings":"lib/cjs/core-frontend","license":"MIT","scripts":{"build":"npm run -s copy:public && npm run -s build:cjs && npm run -s build:esm && npm run -s webpackWorkers && npm run -s copy:workers && npm run -s copy:draco","build:cjs":"npm run -s copy:js:cjs && tsc 1>&2 --outDir lib/cjs","build:esm":"npm run -s copy:js:esm && tsc 1>&2 --module ES2022 --outDir lib/esm","clean":"rimraf -g lib .rush/temp/package-deps*.json","copy:public":"cpx \\"./src/public/**/*\\" ./lib/public","copy:js:cjs":"cpx \\"./src/**/*.js\\" ./lib/cjs","copy:js:esm":"cpx \\"./src/**/*.js\\" ./lib/esm","copy:workers":"cpx \\"./lib/workers/webpack/parse-imdl-worker.js\\" ./lib/public/scripts","copy:draco":"cpx \\"./node_modules/@loaders.gl/draco/dist/libs/*\\" ./lib/public/scripts","docs":"betools docs --json=../../generated-docs/core/core-frontend/file.json --tsIndexFile=./core-frontend.ts --onlyJson --excludes=webgl/**/*,**/map/*.d.ts,**/tile/*.d.ts,**/*-css.ts && npm run -s extract","extract":"betools extract --fileExt=ts --extractFrom=./src/test/example-code --recursive --out=../../generated-docs/extract","extract-api":"betools extract-api --entry=core-frontend && npm run extract-extension-api","extract-extension-api":"eslint --no-inline-config -c extraction.eslint.config.js  \\"./src/**/*.ts\\" 1>&2","lint":"eslint \\"./src/**/*.ts\\" 1>&2","lint-fix":"eslint --fix -f visualstudio \\"./src/**/*.ts\\" 1>&2","lint-deprecation":"eslint --fix -f visualstudio --no-inline-config -c ../../common/config/eslint/eslint.config.deprecation-policy.js \\"./src/**/*.ts\\"","pseudolocalize":"betools pseudolocalize --englishDir ./src/public/locales/en --out ./public/locales/en-PSEUDO","test":"npm run webpackTestWorker && vitest --run","cover":"npm run webpackTestWorker && vitest --run","webpackTests":"webpack --config ./src/test/utils/webpack.config.js 1>&2 && npm run -s webpackTestWorker","webpackTestWorker":"webpack --config ./src/test/worker/webpack.config.js 1>&2 && cpx \\"./lib/test/test-worker.js\\" ./lib/test","webpackWorkers":"webpack --config ./src/workers/ImdlParser/webpack.config.js 1>&2"},"repository":{"type":"git","url":"https://github.com/iTwin/itwinjs-core.git","directory":"core/frontend"},"keywords":["Bentley","BIM","iModel","digital-twin","iTwin"],"author":{"name":"Bentley Systems, Inc.","url":"http://www.bentley.com"},"peerDependencies":{"@itwin/appui-abstract":"workspace:*","@itwin/core-bentley":"workspace:*","@itwin/core-common":"workspace:*","@itwin/core-geometry":"workspace:*","@itwin/core-orbitgt":"workspace:*","@itwin/core-quantity":"workspace:*","@itwin/ecschema-metadata":"workspace:*","@itwin/ecschema-rpcinterface-common":"workspace:*"},"//devDependencies":["NOTE: All peerDependencies should also be listed as devDependencies since peerDependencies are not considered by npm install","NOTE: All tools used by scripts in this package must be listed as devDependencies"],"devDependencies":{"@bentley/aec-units-schema":"^1.0.3","@bentley/formats-schema":"^1.0.0","@bentley/units-schema":"^1.0.10","@itwin/appui-abstract":"workspace:*","@itwin/build-tools":"workspace:*","@itwin/core-bentley":"workspace:*","@itwin/core-common":"workspace:*","@itwin/core-geometry":"workspace:*","@itwin/core-orbitgt":"workspace:*","@itwin/core-quantity":"workspace:*","@itwin/ecschema-metadata":"workspace:*","@itwin/ecschema-rpcinterface-common":"workspace:*","@itwin/object-storage-core":"^3.0.4","@itwin/eslint-plugin":"^6.0.0","@types/chai-as-promised":"^7","@types/draco3d":"^1.4.10","@types/node":"~20.17.0","@types/sinon":"^17.0.2","@vitest/browser-playwright":"^4.1.8","@vitest/coverage-v8":"^4.1.8","cpx2":"^8.0.0","eslint":"^9.31.0","glob":"^10.5.0","playwright":"~1.56.1","rimraf":"^6.0.1","sinon":"^17.0.2","source-map-loader":"^5.0.0","typescript":"~5.6.2","vitest":"^4.1.8","vite-multiple-assets":"^1.3.1","vite-plugin-static-copy":"2.2.0","webpack":"^5.97.1"},"//dependencies":["NOTE: these dependencies should be only for things that DO NOT APPEAR IN THE API","NOTE: core-frontend should remain UI technology agnostic, so no react/angular dependencies are allowed"],"dependencies":{"@itwin/core-i18n":"workspace:*","@itwin/webgl-compatibility":"workspace:*","@loaders.gl/core":"~4.3.4","@loaders.gl/draco":"~4.3.4","fuse.js":"^3.3.0","wms-capabilities":"0.4.0"}}');
 
 /***/ })