@itwin/core-orbitgt 4.0.0-dev.48 → 4.0.0-dev.50

package/lib/cjs/spatial/ecrs/projection/ObliqueStereographic.d.ts

@@ -1,124 +1,124 @@
-/** @packageDocumentation
- * @module OrbitGT
- */
-declare type int32 = number;
-declare type float64 = number;
-import { Coordinate } from "../../geom/Coordinate";
-import { CRS } from "../CRS";
-import { Ellipsoid } from "../Ellipsoid";
-import { Operation } from "../Operation";
-import { OperationMethod } from "../OperationMethod";
-import { ParameterValueList } from "../ParameterValueList";
-/**
- * Class ObliqueStereographic defines an Oblique Stereographic projection.
- *
- * The 'source' CRS is the geodetic CRS.
- * The 'target' CRS is the projected CRS.
- *
- * Based on the following document:
- *
- * Coordinate Conversions and Transformations including Formulas
- * Guidance Note Number 7, part 2
- * Revised August 2006
- * Available at: http://www.epsg.org/
- *
- * Formulas: see 1.4.7.1 'Oblique and Equatorial Stereographic cases'
- *
- * @version 1.0 December 2006
- */
-/** @internal */
-export declare class ObliqueStereographic extends OperationMethod {
-    /** The code of this method */
-    static readonly METHOD_CODE: int32;
-    /** The value of PI */
-    private static readonly PI;
-    /** Latitude of false origin */
-    private _lat0;
-    /** Longitude of false origin */
-    private _lon0;
-    /** Scale factor at natural origin */
-    private _k0;
-    /** False easting */
-    private _fe;
-    /** False northing */
-    private _fn;
-    /** The parameters for the conformal sphere */
-    private _e;
-    private _e2;
-    private _R;
-    private _n;
-    private _c;
-    private _chi0;
-    private _lambda0;
-    private _g;
-    private _h;
-    /**
-       * Create a new projection.
-       * @param parameters the values of the parameters.
-       */
-    constructor(parameters: ParameterValueList);
-    /**
-       * Create a new projection.
-       * @param lat0 latitude of natural origin (radians).
-       * @param lon0 longitude of natural origin (radians).
-       * @param k0 scale factor at natural origin.
-       * @param fe false easting.
-       * @param fn false northing.
-       */
-    static create(lat0: float64, lon0: float64, k0: float64, fe: float64, fn: float64): ObliqueStereographic;
-    /**
-       * Get the power of a number.
-       */
-    private static pow;
-    /**
-       * Calculate sinus.
-       */
-    private static sin;
-    /**
-       * Calculate cosinus.
-       */
-    private static cos;
-    /**
-       * Calculate tangent.
-       */
-    private static tan;
-    /**
-       * Calculate arcsinus.
-       */
-    private static asin;
-    /**
-       * Calculate arctangent.
-       */
-    private static atan;
-    /**
-       * Calculate log.
-       */
-    private static log;
-    /**
-       * Calculate exp.
-       */
-    private static exp;
-    /**
-       * Initialize the projection.
-       * @param ellipsoid the ellipsoid to use.
-       * @return this projection (for convenience).
-       */
-    initializeProjection(ellipsoid: Ellipsoid): ObliqueStereographic;
-    /**
-       * OperationMethod method.
-       * @see OperationMethod#initialize
-       */
-    initialize(operation: Operation): void;
-    /**
-       * OperationMethod interface method.
-       * @see OperationMethod#forward
-       */
-    forward(sourceCRS: CRS, source: Coordinate, targetCRS: CRS, target: Coordinate): void;
-    /**
-       * OperationMethod interface method.
-       * @see OperationMethod#reverse
-       */
-    reverse(sourceCRS: CRS, source: Coordinate, targetCRS: CRS, target: Coordinate): void;
-}
-export {};
+/** @packageDocumentation
+ * @module OrbitGT
+ */
+declare type int32 = number;
+declare type float64 = number;
+import { Coordinate } from "../../geom/Coordinate";
+import { CRS } from "../CRS";
+import { Ellipsoid } from "../Ellipsoid";
+import { Operation } from "../Operation";
+import { OperationMethod } from "../OperationMethod";
+import { ParameterValueList } from "../ParameterValueList";
+/**
+ * Class ObliqueStereographic defines an Oblique Stereographic projection.
+ *
+ * The 'source' CRS is the geodetic CRS.
+ * The 'target' CRS is the projected CRS.
+ *
+ * Based on the following document:
+ *
+ * Coordinate Conversions and Transformations including Formulas
+ * Guidance Note Number 7, part 2
+ * Revised August 2006
+ * Available at: http://www.epsg.org/
+ *
+ * Formulas: see 1.4.7.1 'Oblique and Equatorial Stereographic cases'
+ *
+ * @version 1.0 December 2006
+ */
+/** @internal */
+export declare class ObliqueStereographic extends OperationMethod {
+    /** The code of this method */
+    static readonly METHOD_CODE: int32;
+    /** The value of PI */
+    private static readonly PI;
+    /** Latitude of false origin */
+    private _lat0;
+    /** Longitude of false origin */
+    private _lon0;
+    /** Scale factor at natural origin */
+    private _k0;
+    /** False easting */
+    private _fe;
+    /** False northing */
+    private _fn;
+    /** The parameters for the conformal sphere */
+    private _e;
+    private _e2;
+    private _R;
+    private _n;
+    private _c;
+    private _chi0;
+    private _lambda0;
+    private _g;
+    private _h;
+    /**
+       * Create a new projection.
+       * @param parameters the values of the parameters.
+       */
+    constructor(parameters: ParameterValueList);
+    /**
+       * Create a new projection.
+       * @param lat0 latitude of natural origin (radians).
+       * @param lon0 longitude of natural origin (radians).
+       * @param k0 scale factor at natural origin.
+       * @param fe false easting.
+       * @param fn false northing.
+       */
+    static create(lat0: float64, lon0: float64, k0: float64, fe: float64, fn: float64): ObliqueStereographic;
+    /**
+       * Get the power of a number.
+       */
+    private static pow;
+    /**
+       * Calculate sinus.
+       */
+    private static sin;
+    /**
+       * Calculate cosinus.
+       */
+    private static cos;
+    /**
+       * Calculate tangent.
+       */
+    private static tan;
+    /**
+       * Calculate arcsinus.
+       */
+    private static asin;
+    /**
+       * Calculate arctangent.
+       */
+    private static atan;
+    /**
+       * Calculate log.
+       */
+    private static log;
+    /**
+       * Calculate exp.
+       */
+    private static exp;
+    /**
+       * Initialize the projection.
+       * @param ellipsoid the ellipsoid to use.
+       * @return this projection (for convenience).
+       */
+    initializeProjection(ellipsoid: Ellipsoid): ObliqueStereographic;
+    /**
+       * OperationMethod method.
+       * @see OperationMethod#initialize
+       */
+    initialize(operation: Operation): void;
+    /**
+       * OperationMethod interface method.
+       * @see OperationMethod#forward
+       */
+    forward(sourceCRS: CRS, source: Coordinate, targetCRS: CRS, target: Coordinate): void;
+    /**
+       * OperationMethod interface method.
+       * @see OperationMethod#reverse
+       */
+    reverse(sourceCRS: CRS, source: Coordinate, targetCRS: CRS, target: Coordinate): void;
+}
+export {};
 //# sourceMappingURL=ObliqueStereographic.d.ts.map

package/lib/cjs/spatial/ecrs/projection/ObliqueStereographic.js

@@ -1,209 +1,209 @@
-"use strict";
-/*---------------------------------------------------------------------------------------------
-* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
-* See LICENSE.md in the project root for license terms and full copyright notice.
-*--------------------------------------------------------------------------------------------*/
-/** @packageDocumentation
- * @module OrbitGT
- */
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.ObliqueStereographic = void 0;
-const OperationMethod_1 = require("../OperationMethod");
-/**
- * Class ObliqueStereographic defines an Oblique Stereographic projection.
- *
- * The 'source' CRS is the geodetic CRS.
- * The 'target' CRS is the projected CRS.
- *
- * Based on the following document:
- *
- * Coordinate Conversions and Transformations including Formulas
- * Guidance Note Number 7, part 2
- * Revised August 2006
- * Available at: http://www.epsg.org/
- *
- * Formulas: see 1.4.7.1 'Oblique and Equatorial Stereographic cases'
- *
- * @version 1.0 December 2006
- */
-/** @internal */
-class ObliqueStereographic extends OperationMethod_1.OperationMethod {
-    /**
-       * Create a new projection.
-       * @param parameters the values of the parameters.
-       */
-    constructor(parameters) {
-        super(ObliqueStereographic.METHOD_CODE, "Oblique Stereographic", parameters);
-        /* Store the parameters */
-        this._lat0 = (parameters != null) ? parameters.getValue(8801) : 0.0;
-        this._lon0 = (parameters != null) ? parameters.getValue(8802) : 0.0;
-        this._k0 = (parameters != null) ? parameters.getValue(8805) : 0.0;
-        this._fe = (parameters != null) ? parameters.getValue(8806) : 0.0;
-        this._fn = (parameters != null) ? parameters.getValue(8807) : 0.0;
-    }
-    /**
-       * Create a new projection.
-       * @param lat0 latitude of natural origin (radians).
-       * @param lon0 longitude of natural origin (radians).
-       * @param k0 scale factor at natural origin.
-       * @param fe false easting.
-       * @param fn false northing.
-       */
-    static create(lat0, lon0, k0, fe, fn) {
-        const projection = new ObliqueStereographic(null);
-        projection._lat0 = lat0;
-        projection._lon0 = lon0;
-        projection._k0 = k0;
-        projection._fe = fe;
-        projection._fn = fn;
-        return projection;
-    }
-    /**
-       * Get the power of a number.
-       */
-    static pow(n, e) {
-        return Math.exp(e * Math.log(n));
-    }
-    /**
-       * Calculate sinus.
-       */
-    static sin(a) {
-        return Math.sin(a);
-    }
-    /**
-       * Calculate cosinus.
-       */
-    static cos(a) {
-        return Math.cos(a);
-    }
-    /**
-       * Calculate tangent.
-       */
-    static tan(a) {
-        return Math.tan(a);
-    }
-    /**
-       * Calculate arcsinus.
-       */
-    static asin(v) {
-        return Math.asin(v);
-    }
-    /**
-       * Calculate arctangent.
-       */
-    static atan(v) {
-        return Math.atan(v);
-    }
-    /**
-       * Calculate log.
-       */
-    static log(v) {
-        return Math.log(v);
-    }
-    /**
-       * Calculate exp.
-       */
-    static exp(v) {
-        return Math.exp(v);
-    }
-    /**
-       * Initialize the projection.
-       * @param ellipsoid the ellipsoid to use.
-       * @return this projection (for convenience).
-       */
-    initializeProjection(ellipsoid) {
-        /* Get the ellipsoid parameters */
-        const a = ellipsoid.getA();
-        this._e = ellipsoid.getE();
-        /* Calculate conformat latitude (chi0) and longitude (lambda0) */
-        this._e2 = this._e * this._e;
-        const sinLat0 = ObliqueStereographic.sin(this._lat0);
-        const t0 = 1.0 - this._e2 * sinLat0 * sinLat0;
-        const rho0 = a * (1 - this._e2) / ObliqueStereographic.pow(t0, 1.5);
-        const nu0 = a / ObliqueStereographic.pow(t0, 0.5);
-        this._R = ObliqueStereographic.pow(rho0 * nu0, 0.5);
-        this._n = ObliqueStereographic.pow(1.0 + (this._e2 * ObliqueStereographic.pow(ObliqueStereographic.cos(this._lat0), 4)) / (1.0 - this._e2), 0.5);
-        const S1 = (1.0 + sinLat0) / (1.0 - sinLat0);
-        const S2 = (1.0 - this._e * sinLat0) / (1.0 + this._e * sinLat0);
-        const w1 = ObliqueStereographic.pow(S1 * ObliqueStereographic.pow(S2, this._e), this._n);
-        const sinChi0 = (w1 - 1.0) / (w1 + 1.0);
-        this._c = (this._n + sinLat0) * (1.0 - sinChi0) / ((this._n - sinLat0) * (1.0 + sinChi0));
-        const w2 = this._c * w1;
-        this._chi0 = ObliqueStereographic.asin((w2 - 1.0) / (w2 + 1.0));
-        this._lambda0 = this._lon0;
-        /* For reverse calculation */
-        this._g = 2.0 * this._R * this._k0 * ObliqueStereographic.tan(ObliqueStereographic.PI / 4.0 - this._chi0 / 2.0);
-        this._h = 4.0 * this._R * this._k0 * ObliqueStereographic.tan(this._chi0) + this._g;
-        /* Return the projection */
-        return this;
-    }
-    /**
-       * OperationMethod method.
-       * @see OperationMethod#initialize
-       */
-    initialize(operation) {
-        this.initializeProjection(operation.getSourceCRS().getEllipsoid());
-    }
-    /**
-       * OperationMethod interface method.
-       * @see OperationMethod#forward
-       */
-    forward(sourceCRS, source, targetCRS, target) {
-        /* Get the parameters */
-        const lon = source.getX();
-        const lat = source.getY();
-        const sinLat = ObliqueStereographic.sin(lat);
-        /* Calculate conformal latitude and longitude */
-        const lambda = this._n * (lon - this._lambda0) + this._lambda0;
-        const Sa = (1.0 + sinLat) / (1.0 - sinLat);
-        const Sb = (1.0 - this._e * sinLat) / (1.0 + this._e * sinLat);
-        const w = this._c * ObliqueStereographic.pow(Sa * ObliqueStereographic.pow(Sb, this._e), this._n);
-        const chi = ObliqueStereographic.asin((w - 1.0) / (w + 1.0));
-        /* Calculate easting and northing */
-        const B = 1.0 + ObliqueStereographic.sin(chi) * ObliqueStereographic.sin(this._chi0) + ObliqueStereographic.cos(chi) * ObliqueStereographic.cos(this._chi0) * ObliqueStereographic.cos(lambda - this._lambda0);
-        const E = this._fe + 2.0 * this._R * this._k0 * ObliqueStereographic.cos(chi) * ObliqueStereographic.sin(lambda - this._lambda0) / B;
-        const N = this._fn + 2.0 * this._R * this._k0 * (ObliqueStereographic.sin(chi) * ObliqueStereographic.cos(this._chi0) - ObliqueStereographic.cos(chi) * ObliqueStereographic.sin(this._chi0) * ObliqueStereographic.cos(lambda - this._lambda0)) / B;
-        /* Save the position */
-        target.setX(E);
-        target.setY(N);
-        target.setZ(source.getZ()); // Keep the Z value
-    }
-    /**
-       * OperationMethod interface method.
-       * @see OperationMethod#reverse
-       */
-    reverse(sourceCRS, source, targetCRS, target) {
-        /* Get the parameters */
-        const E = target.getX() - this._fe;
-        const N = target.getY() - this._fn;
-        /* Calculate conformal latitude and longitude */
-        const i = ObliqueStereographic.atan(E / (this._h + N));
-        const j = ObliqueStereographic.atan(E / (this._g - N)) - i;
-        const chi = this._chi0 + 2.0 * ObliqueStereographic.atan((N - E * ObliqueStereographic.tan(j / 2.0)) / (2.0 * this._R * this._k0));
-        const lambda = j + 2.0 * i + this._lambda0;
-        const lon = (lambda - this._lambda0) / this._n + this._lambda0;
-        /* Iterate to get isometric (psi) and geodetic (phi) latitude */
-        const sinChi = ObliqueStereographic.sin(chi);
-        const psi = 0.5 * ObliqueStereographic.log((1.0 + sinChi) / (this._c * (1.0 - sinChi))) / this._n;
-        let phiK = 2.0 * ObliqueStereographic.atan(ObliqueStereographic.exp(psi)) - ObliqueStereographic.PI / 2.0;
-        for (let k = 1; k < 8; k++) {
-            const esinPhi = this._e * ObliqueStereographic.sin(phiK);
-            const psiK = ObliqueStereographic.log(ObliqueStereographic.tan(phiK / 2.0 + ObliqueStereographic.PI / 4.0) * ObliqueStereographic.pow((1.0 - esinPhi) / (1.0 + esinPhi), this._e / 2.0));
-            const phiNextK = phiK - (psiK - psi) * ObliqueStereographic.cos(phiK) * (1.0 - esinPhi * esinPhi) / (1.0 - this._e2);
-            const change = Math.abs(phiNextK - phiK);
-            phiK = phiNextK;
-            if (change < 1.0e-12)
-                break; // normally after 4 iterations
-        }
-        /* Save the position */
-        source.setX(lon);
-        source.setY(phiK);
-        source.setZ(target.getZ()); // Keep the Z value
-    }
-}
-exports.ObliqueStereographic = ObliqueStereographic;
-/** The code of this method */
-ObliqueStereographic.METHOD_CODE = 9809;
-/** The value of PI */
-ObliqueStereographic.PI = Math.PI;
+"use strict";
+/*---------------------------------------------------------------------------------------------
+* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
+* See LICENSE.md in the project root for license terms and full copyright notice.
+*--------------------------------------------------------------------------------------------*/
+/** @packageDocumentation
+ * @module OrbitGT
+ */
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.ObliqueStereographic = void 0;
+const OperationMethod_1 = require("../OperationMethod");
+/**
+ * Class ObliqueStereographic defines an Oblique Stereographic projection.
+ *
+ * The 'source' CRS is the geodetic CRS.
+ * The 'target' CRS is the projected CRS.
+ *
+ * Based on the following document:
+ *
+ * Coordinate Conversions and Transformations including Formulas
+ * Guidance Note Number 7, part 2
+ * Revised August 2006
+ * Available at: http://www.epsg.org/
+ *
+ * Formulas: see 1.4.7.1 'Oblique and Equatorial Stereographic cases'
+ *
+ * @version 1.0 December 2006
+ */
+/** @internal */
+class ObliqueStereographic extends OperationMethod_1.OperationMethod {
+    /**
+       * Create a new projection.
+       * @param parameters the values of the parameters.
+       */
+    constructor(parameters) {
+        super(ObliqueStereographic.METHOD_CODE, "Oblique Stereographic", parameters);
+        /* Store the parameters */
+        this._lat0 = (parameters != null) ? parameters.getValue(8801) : 0.0;
+        this._lon0 = (parameters != null) ? parameters.getValue(8802) : 0.0;
+        this._k0 = (parameters != null) ? parameters.getValue(8805) : 0.0;
+        this._fe = (parameters != null) ? parameters.getValue(8806) : 0.0;
+        this._fn = (parameters != null) ? parameters.getValue(8807) : 0.0;
+    }
+    /**
+       * Create a new projection.
+       * @param lat0 latitude of natural origin (radians).
+       * @param lon0 longitude of natural origin (radians).
+       * @param k0 scale factor at natural origin.
+       * @param fe false easting.
+       * @param fn false northing.
+       */
+    static create(lat0, lon0, k0, fe, fn) {
+        const projection = new ObliqueStereographic(null);
+        projection._lat0 = lat0;
+        projection._lon0 = lon0;
+        projection._k0 = k0;
+        projection._fe = fe;
+        projection._fn = fn;
+        return projection;
+    }
+    /**
+       * Get the power of a number.
+       */
+    static pow(n, e) {
+        return Math.exp(e * Math.log(n));
+    }
+    /**
+       * Calculate sinus.
+       */
+    static sin(a) {
+        return Math.sin(a);
+    }
+    /**
+       * Calculate cosinus.
+       */
+    static cos(a) {
+        return Math.cos(a);
+    }
+    /**
+       * Calculate tangent.
+       */
+    static tan(a) {
+        return Math.tan(a);
+    }
+    /**
+       * Calculate arcsinus.
+       */
+    static asin(v) {
+        return Math.asin(v);
+    }
+    /**
+       * Calculate arctangent.
+       */
+    static atan(v) {
+        return Math.atan(v);
+    }
+    /**
+       * Calculate log.
+       */
+    static log(v) {
+        return Math.log(v);
+    }
+    /**
+       * Calculate exp.
+       */
+    static exp(v) {
+        return Math.exp(v);
+    }
+    /**
+       * Initialize the projection.
+       * @param ellipsoid the ellipsoid to use.
+       * @return this projection (for convenience).
+       */
+    initializeProjection(ellipsoid) {
+        /* Get the ellipsoid parameters */
+        const a = ellipsoid.getA();
+        this._e = ellipsoid.getE();
+        /* Calculate conformat latitude (chi0) and longitude (lambda0) */
+        this._e2 = this._e * this._e;
+        const sinLat0 = ObliqueStereographic.sin(this._lat0);
+        const t0 = 1.0 - this._e2 * sinLat0 * sinLat0;
+        const rho0 = a * (1 - this._e2) / ObliqueStereographic.pow(t0, 1.5);
+        const nu0 = a / ObliqueStereographic.pow(t0, 0.5);
+        this._R = ObliqueStereographic.pow(rho0 * nu0, 0.5);
+        this._n = ObliqueStereographic.pow(1.0 + (this._e2 * ObliqueStereographic.pow(ObliqueStereographic.cos(this._lat0), 4)) / (1.0 - this._e2), 0.5);
+        const S1 = (1.0 + sinLat0) / (1.0 - sinLat0);
+        const S2 = (1.0 - this._e * sinLat0) / (1.0 + this._e * sinLat0);
+        const w1 = ObliqueStereographic.pow(S1 * ObliqueStereographic.pow(S2, this._e), this._n);
+        const sinChi0 = (w1 - 1.0) / (w1 + 1.0);
+        this._c = (this._n + sinLat0) * (1.0 - sinChi0) / ((this._n - sinLat0) * (1.0 + sinChi0));
+        const w2 = this._c * w1;
+        this._chi0 = ObliqueStereographic.asin((w2 - 1.0) / (w2 + 1.0));
+        this._lambda0 = this._lon0;
+        /* For reverse calculation */
+        this._g = 2.0 * this._R * this._k0 * ObliqueStereographic.tan(ObliqueStereographic.PI / 4.0 - this._chi0 / 2.0);
+        this._h = 4.0 * this._R * this._k0 * ObliqueStereographic.tan(this._chi0) + this._g;
+        /* Return the projection */
+        return this;
+    }
+    /**
+       * OperationMethod method.
+       * @see OperationMethod#initialize
+       */
+    initialize(operation) {
+        this.initializeProjection(operation.getSourceCRS().getEllipsoid());
+    }
+    /**
+       * OperationMethod interface method.
+       * @see OperationMethod#forward
+       */
+    forward(sourceCRS, source, targetCRS, target) {
+        /* Get the parameters */
+        const lon = source.getX();
+        const lat = source.getY();
+        const sinLat = ObliqueStereographic.sin(lat);
+        /* Calculate conformal latitude and longitude */
+        const lambda = this._n * (lon - this._lambda0) + this._lambda0;
+        const Sa = (1.0 + sinLat) / (1.0 - sinLat);
+        const Sb = (1.0 - this._e * sinLat) / (1.0 + this._e * sinLat);
+        const w = this._c * ObliqueStereographic.pow(Sa * ObliqueStereographic.pow(Sb, this._e), this._n);
+        const chi = ObliqueStereographic.asin((w - 1.0) / (w + 1.0));
+        /* Calculate easting and northing */
+        const B = 1.0 + ObliqueStereographic.sin(chi) * ObliqueStereographic.sin(this._chi0) + ObliqueStereographic.cos(chi) * ObliqueStereographic.cos(this._chi0) * ObliqueStereographic.cos(lambda - this._lambda0);
+        const E = this._fe + 2.0 * this._R * this._k0 * ObliqueStereographic.cos(chi) * ObliqueStereographic.sin(lambda - this._lambda0) / B;
+        const N = this._fn + 2.0 * this._R * this._k0 * (ObliqueStereographic.sin(chi) * ObliqueStereographic.cos(this._chi0) - ObliqueStereographic.cos(chi) * ObliqueStereographic.sin(this._chi0) * ObliqueStereographic.cos(lambda - this._lambda0)) / B;
+        /* Save the position */
+        target.setX(E);
+        target.setY(N);
+        target.setZ(source.getZ()); // Keep the Z value
+    }
+    /**
+       * OperationMethod interface method.
+       * @see OperationMethod#reverse
+       */
+    reverse(sourceCRS, source, targetCRS, target) {
+        /* Get the parameters */
+        const E = target.getX() - this._fe;
+        const N = target.getY() - this._fn;
+        /* Calculate conformal latitude and longitude */
+        const i = ObliqueStereographic.atan(E / (this._h + N));
+        const j = ObliqueStereographic.atan(E / (this._g - N)) - i;
+        const chi = this._chi0 + 2.0 * ObliqueStereographic.atan((N - E * ObliqueStereographic.tan(j / 2.0)) / (2.0 * this._R * this._k0));
+        const lambda = j + 2.0 * i + this._lambda0;
+        const lon = (lambda - this._lambda0) / this._n + this._lambda0;
+        /* Iterate to get isometric (psi) and geodetic (phi) latitude */
+        const sinChi = ObliqueStereographic.sin(chi);
+        const psi = 0.5 * ObliqueStereographic.log((1.0 + sinChi) / (this._c * (1.0 - sinChi))) / this._n;
+        let phiK = 2.0 * ObliqueStereographic.atan(ObliqueStereographic.exp(psi)) - ObliqueStereographic.PI / 2.0;
+        for (let k = 1; k < 8; k++) {
+            const esinPhi = this._e * ObliqueStereographic.sin(phiK);
+            const psiK = ObliqueStereographic.log(ObliqueStereographic.tan(phiK / 2.0 + ObliqueStereographic.PI / 4.0) * ObliqueStereographic.pow((1.0 - esinPhi) / (1.0 + esinPhi), this._e / 2.0));
+            const phiNextK = phiK - (psiK - psi) * ObliqueStereographic.cos(phiK) * (1.0 - esinPhi * esinPhi) / (1.0 - this._e2);
+            const change = Math.abs(phiNextK - phiK);
+            phiK = phiNextK;
+            if (change < 1.0e-12)
+                break; // normally after 4 iterations
+        }
+        /* Save the position */
+        source.setX(lon);
+        source.setY(phiK);
+        source.setZ(target.getZ()); // Keep the Z value
+    }
+}
+exports.ObliqueStereographic = ObliqueStereographic;
+/** The code of this method */
+ObliqueStereographic.METHOD_CODE = 9809;
+/** The value of PI */
+ObliqueStereographic.PI = Math.PI;
 //# sourceMappingURL=ObliqueStereographic.js.map