@itwin/core-common 3.7.4 → 3.7.6

package/lib/esm/tile/IModelTileIO.js

@@ -1,93 +1,93 @@
-/*---------------------------------------------------------------------------------------------
-* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
-* See LICENSE.md in the project root for license terms and full copyright notice.
-*--------------------------------------------------------------------------------------------*/
-/** @packageDocumentation
- * @module Tile
- */
-import { assert } from "@itwin/core-bentley";
-import { Range3d } from "@itwin/core-geometry";
-import { nextPoint3d64FromByteStream, TileFormat, TileHeader } from "./TileIO";
-/** Flags describing the geometry contained within a tile in iMdl format.
- * @internal
- */
-export var ImdlFlags;
-(function (ImdlFlags) {
-    /** No special flags */
-    ImdlFlags[ImdlFlags["None"] = 0] = "None";
-    /** The tile contains some curved geometry */
-    ImdlFlags[ImdlFlags["ContainsCurves"] = 1] = "ContainsCurves";
-    /** Some geometry within the tile range was omitted based on its size */
-    ImdlFlags[ImdlFlags["Incomplete"] = 4] = "Incomplete";
-    /** The tile must be refined by sub-division, not magnification. */
-    ImdlFlags[ImdlFlags["DisallowMagnification"] = 8] = "DisallowMagnification";
-    /** The tile's feature table contains features from multiple models. */
-    ImdlFlags[ImdlFlags["MultiModelFeatureTable"] = 16] = "MultiModelFeatureTable";
-})(ImdlFlags || (ImdlFlags = {}));
-/** Describes the maximum major and minor version of the iMdl tile format supported by this version of this package.
- * @internal
- */
-export var CurrentImdlVersion;
-(function (CurrentImdlVersion) {
-    /** The unsigned 16-bit major version number. If the major version specified in the tile header is greater than this value, then this
-     * front-end is not capable of reading the tile content. Otherwise, this front-end can read the tile content even if the header specifies a
-     * greater minor version than CurrentVersion.Minor, although some data may be skipped.
-     */
-    CurrentImdlVersion[CurrentImdlVersion["Major"] = 30] = "Major";
-    /** The unsigned 16-bit minor version number. If the major version in the tile header is equal to CurrentVersion.Major, then this package can
-     * read the tile content even if the minor version in the tile header is greater than this value, although some data may be skipped.
-     */
-    CurrentImdlVersion[CurrentImdlVersion["Minor"] = 0] = "Minor";
-    /** The unsigned 32-bit version number derived from the 16-bit major and minor version numbers. */
-    CurrentImdlVersion[CurrentImdlVersion["Combined"] = 1966080] = "Combined";
-})(CurrentImdlVersion || (CurrentImdlVersion = {}));
-/** Header embedded at the beginning of binary tile data in iMdl format describing its contents.
- * @internal
- */
-export class ImdlHeader extends TileHeader {
-    /** Deserialize a header from the binary data at the stream's current position.
-     * If the binary data does not contain a valid header, the Header will be marked 'invalid'.
-     */
-    constructor(stream) {
-        super(stream);
-        this.headerLength = stream.readUint32();
-        this.flags = stream.readUint32();
-        this.contentRange = new Range3d();
-        nextPoint3d64FromByteStream(stream, this.contentRange.low);
-        nextPoint3d64FromByteStream(stream, this.contentRange.high);
-        this.tolerance = stream.readFloat64();
-        this.numElementsIncluded = stream.readUint32();
-        this.numElementsExcluded = stream.readUint32();
-        this.tileLength = stream.readUint32();
-        // empty sub-volume bit field introduced in format v02.00
-        this.emptySubRanges = this.versionMajor >= 2 ? stream.readUint32() : 0;
-        // Skip any unprocessed bytes in header
-        const remainingHeaderBytes = this.headerLength - stream.curPos;
-        assert(remainingHeaderBytes >= 0);
-        stream.advance(remainingHeaderBytes);
-        if (stream.isPastTheEnd)
-            this.invalidate();
-    }
-    get versionMajor() { return this.version >>> 0x10; }
-    get versionMinor() { return (this.version & 0xffff) >>> 0; }
-    get isValid() { return TileFormat.IModel === this.format; }
-    get isReadableVersion() { return this.versionMajor <= CurrentImdlVersion.Major; }
-}
-/** Header preceding the feature table embedded in an iMdl tile's content.
- * @internal
- */
-export class FeatureTableHeader {
-    constructor(length, numSubCategories, count) {
-        this.length = length;
-        this.numSubCategories = numSubCategories;
-        this.count = count;
-    }
-    static readFrom(stream) {
-        const length = stream.readUint32();
-        const maxFeatures = stream.readUint32();
-        const count = stream.readUint32();
-        return stream.isPastTheEnd ? undefined : new FeatureTableHeader(length, maxFeatures, count);
-    }
-}
-FeatureTableHeader.sizeInBytes = 12;
+/*---------------------------------------------------------------------------------------------
+* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
+* See LICENSE.md in the project root for license terms and full copyright notice.
+*--------------------------------------------------------------------------------------------*/
+/** @packageDocumentation
+ * @module Tile
+ */
+import { assert } from "@itwin/core-bentley";
+import { Range3d } from "@itwin/core-geometry";
+import { nextPoint3d64FromByteStream, TileFormat, TileHeader } from "./TileIO";
+/** Flags describing the geometry contained within a tile in iMdl format.
+ * @internal
+ */
+export var ImdlFlags;
+(function (ImdlFlags) {
+    /** No special flags */
+    ImdlFlags[ImdlFlags["None"] = 0] = "None";
+    /** The tile contains some curved geometry */
+    ImdlFlags[ImdlFlags["ContainsCurves"] = 1] = "ContainsCurves";
+    /** Some geometry within the tile range was omitted based on its size */
+    ImdlFlags[ImdlFlags["Incomplete"] = 4] = "Incomplete";
+    /** The tile must be refined by sub-division, not magnification. */
+    ImdlFlags[ImdlFlags["DisallowMagnification"] = 8] = "DisallowMagnification";
+    /** The tile's feature table contains features from multiple models. */
+    ImdlFlags[ImdlFlags["MultiModelFeatureTable"] = 16] = "MultiModelFeatureTable";
+})(ImdlFlags || (ImdlFlags = {}));
+/** Describes the maximum major and minor version of the iMdl tile format supported by this version of this package.
+ * @internal
+ */
+export var CurrentImdlVersion;
+(function (CurrentImdlVersion) {
+    /** The unsigned 16-bit major version number. If the major version specified in the tile header is greater than this value, then this
+     * front-end is not capable of reading the tile content. Otherwise, this front-end can read the tile content even if the header specifies a
+     * greater minor version than CurrentVersion.Minor, although some data may be skipped.
+     */
+    CurrentImdlVersion[CurrentImdlVersion["Major"] = 30] = "Major";
+    /** The unsigned 16-bit minor version number. If the major version in the tile header is equal to CurrentVersion.Major, then this package can
+     * read the tile content even if the minor version in the tile header is greater than this value, although some data may be skipped.
+     */
+    CurrentImdlVersion[CurrentImdlVersion["Minor"] = 0] = "Minor";
+    /** The unsigned 32-bit version number derived from the 16-bit major and minor version numbers. */
+    CurrentImdlVersion[CurrentImdlVersion["Combined"] = 1966080] = "Combined";
+})(CurrentImdlVersion || (CurrentImdlVersion = {}));
+/** Header embedded at the beginning of binary tile data in iMdl format describing its contents.
+ * @internal
+ */
+export class ImdlHeader extends TileHeader {
+    /** Deserialize a header from the binary data at the stream's current position.
+     * If the binary data does not contain a valid header, the Header will be marked 'invalid'.
+     */
+    constructor(stream) {
+        super(stream);
+        this.headerLength = stream.readUint32();
+        this.flags = stream.readUint32();
+        this.contentRange = new Range3d();
+        nextPoint3d64FromByteStream(stream, this.contentRange.low);
+        nextPoint3d64FromByteStream(stream, this.contentRange.high);
+        this.tolerance = stream.readFloat64();
+        this.numElementsIncluded = stream.readUint32();
+        this.numElementsExcluded = stream.readUint32();
+        this.tileLength = stream.readUint32();
+        // empty sub-volume bit field introduced in format v02.00
+        this.emptySubRanges = this.versionMajor >= 2 ? stream.readUint32() : 0;
+        // Skip any unprocessed bytes in header
+        const remainingHeaderBytes = this.headerLength - stream.curPos;
+        assert(remainingHeaderBytes >= 0);
+        stream.advance(remainingHeaderBytes);
+        if (stream.isPastTheEnd)
+            this.invalidate();
+    }
+    get versionMajor() { return this.version >>> 0x10; }
+    get versionMinor() { return (this.version & 0xffff) >>> 0; }
+    get isValid() { return TileFormat.IModel === this.format; }
+    get isReadableVersion() { return this.versionMajor <= CurrentImdlVersion.Major; }
+}
+/** Header preceding the feature table embedded in an iMdl tile's content.
+ * @internal
+ */
+export class FeatureTableHeader {
+    constructor(length, numSubCategories, count) {
+        this.length = length;
+        this.numSubCategories = numSubCategories;
+        this.count = count;
+    }
+    static readFrom(stream) {
+        const length = stream.readUint32();
+        const maxFeatures = stream.readUint32();
+        const count = stream.readUint32();
+        return stream.isPastTheEnd ? undefined : new FeatureTableHeader(length, maxFeatures, count);
+    }
+}
+FeatureTableHeader.sizeInBytes = 12;
 //# sourceMappingURL=IModelTileIO.js.map

package/lib/esm/tile/IModelTileIO.js.map

@@ -1 +1 @@
-{"version":3,"file":"IModelTileIO.js","sourceRoot":"","sources":["../../../src/tile/IModelTileIO.ts"],"names":[],"mappings":"AAAA;;;+FAG+F;AAC/F;;GAEG;AAEH,OAAO,EAAE,MAAM,EAAc,MAAM,qBAAqB,CAAC;AACzD,OAAO,EAAE,OAAO,EAAE,MAAM,sBAAsB,CAAC;AAE/C,OAAO,EAAE,2BAA2B,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,UAAU,CAAC;AAE/E;;GAEG;AACH,MAAM,CAAN,IAAY,SAWX;AAXD,WAAY,SAAS;IACnB,uBAAuB;IACvB,yCAAQ,CAAA;IACR,6CAA6C;IAC7C,6DAAuB,CAAA;IACvB,wEAAwE;IACxE,qDAAmB,CAAA;IACnB,mEAAmE;IACnE,2EAA8B,CAAA;IAC9B,uEAAuE;IACvE,8EAA+B,CAAA;AACjC,CAAC,EAXW,SAAS,KAAT,SAAS,QAWpB;AAED;;GAEG;AACH,MAAM,CAAN,IAAY,kBAYX;AAZD,WAAY,kBAAkB;IAC5B;;;OAGG;IACH,8DAAU,CAAA;IACV;;OAEG;IACH,6DAAS,CAAA;IACT,kGAAkG;IAClG,yEAAkC,CAAA;AACpC,CAAC,EAZW,kBAAkB,KAAlB,kBAAkB,QAY7B;AAED;;GAEG;AACH,MAAM,OAAO,UAAW,SAAQ,UAAU;IAwBxC;;OAEG;IACH,YAAmB,MAAkB;QACnC,KAAK,CAAC,MAAM,CAAC,CAAC;QACd,IAAI,CAAC,YAAY,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QACxC,IAAI,CAAC,KAAK,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAEjC,IAAI,CAAC,YAAY,GAAG,IAAI,OAAO,EAAE,CAAC;QAClC,2BAA2B,CAAC,MAAM,EAAE,IAAI,CAAC,YAAY,CAAC,GAAG,CAAC,CAAC;QAC3D,2BAA2B,CAAC,MAAM,EAAE,IAAI,CAAC,YAAY,CAAC,IAAI,CAAC,CAAC;QAE5D,IAAI,CAAC,SAAS,GAAG,MAAM,CAAC,WAAW,EAAE,CAAC;QACtC,IAAI,CAAC,mBAAmB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAC/C,IAAI,CAAC,mBAAmB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAC/C,IAAI,CAAC,UAAU,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAEtC,yDAAyD;QACzD,IAAI,CAAC,cAAc,GAAG,IAAI,CAAC,YAAY,IAAI,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,UAAU,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC;QAEvE,uCAAuC;QACvC,MAAM,oBAAoB,GAAG,IAAI,CAAC,YAAY,GAAG,MAAM,CAAC,MAAM,CAAC;QAC/D,MAAM,CAAC,oBAAoB,IAAI,CAAC,CAAC,CAAC;QAClC,MAAM,CAAC,OAAO,CAAC,oBAAoB,CAAC,CAAC;QAErC,IAAI,MAAM,CAAC,YAAY;YACrB,IAAI,CAAC,UAAU,EAAE,CAAC;IACtB,CAAC;IAjCD,IAAW,YAAY,KAAa,OAAO,IAAI,CAAC,OAAO,KAAK,IAAI,CAAC,CAAC,CAAC;IACnE,IAAW,YAAY,KAAa,OAAO,CAAC,IAAI,CAAC,OAAO,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC;IAE3E,IAAW,OAAO,KAAc,OAAO,UAAU,CAAC,MAAM,KAAK,IAAI,CAAC,MAAM,CAAC,CAAC,CAAC;IAC3E,IAAW,iBAAiB,KAAc,OAAO,IAAI,CAAC,YAAY,IAAI,kBAAkB,CAAC,KAAK,CAAC,CAAC,CAAC;CA8BlG;AAED;;GAEG;AACH,MAAM,OAAO,kBAAkB;IAkB7B,YAAoB,MAAc,EAAE,gBAAwB,EAAE,KAAa;QACzE,IAAI,CAAC,MAAM,GAAG,MAAM,CAAC;QACrB,IAAI,CAAC,gBAAgB,GAAG,gBAAgB,CAAC;QACzC,IAAI,CAAC,KAAK,GAAG,KAAK,CAAC;IACrB,CAAC;IAbM,MAAM,CAAC,QAAQ,CAAC,MAAkB;QACvC,MAAM,MAAM,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QACnC,MAAM,WAAW,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QACxC,MAAM,KAAK,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAClC,OAAO,MAAM,CAAC,YAAY,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,IAAI,kBAAkB,CAAC,MAAM,EAAE,WAAW,EAAE,KAAK,CAAC,CAAC;IAC9F,CAAC;;AAEa,8BAAW,GAAG,EAAE,CAAC","sourcesContent":["/*---------------------------------------------------------------------------------------------\n* Copyright (c) Bentley Systems, Incorporated. All rights reserved.\n* See LICENSE.md in the project root for license terms and full copyright notice.\n*--------------------------------------------------------------------------------------------*/\n/** @packageDocumentation\n * @module Tile\n */\n\nimport { assert, ByteStream } from \"@itwin/core-bentley\";\nimport { Range3d } from \"@itwin/core-geometry\";\nimport { ElementAlignedBox3d } from \"../geometry/Placement\";\nimport { nextPoint3d64FromByteStream, TileFormat, TileHeader } from \"./TileIO\";\n\n/** Flags describing the geometry contained within a tile in iMdl format.\n * @internal\n */\nexport enum ImdlFlags {\n  /** No special flags */\n  None = 0,\n  /** The tile contains some curved geometry */\n  ContainsCurves = 1 << 0,\n  /** Some geometry within the tile range was omitted based on its size */\n  Incomplete = 1 << 2,\n  /** The tile must be refined by sub-division, not magnification. */\n  DisallowMagnification = 1 << 3,\n  /** The tile's feature table contains features from multiple models. */\n  MultiModelFeatureTable = 1 << 4,\n}\n\n/** Describes the maximum major and minor version of the iMdl tile format supported by this version of this package.\n * @internal\n */\nexport enum CurrentImdlVersion {\n  /** The unsigned 16-bit major version number. If the major version specified in the tile header is greater than this value, then this\n   * front-end is not capable of reading the tile content. Otherwise, this front-end can read the tile content even if the header specifies a\n   * greater minor version than CurrentVersion.Minor, although some data may be skipped.\n   */\n  Major = 30,\n  /** The unsigned 16-bit minor version number. If the major version in the tile header is equal to CurrentVersion.Major, then this package can\n   * read the tile content even if the minor version in the tile header is greater than this value, although some data may be skipped.\n   */\n  Minor = 0,\n  /** The unsigned 32-bit version number derived from the 16-bit major and minor version numbers. */\n  Combined = (Major << 0x10) | Minor,\n}\n\n/** Header embedded at the beginning of binary tile data in iMdl format describing its contents.\n * @internal\n */\nexport class ImdlHeader extends TileHeader {\n  /** The size of this header in bytes. */\n  public readonly headerLength: number;\n  /** Flags describing the geometry contained within the tile */\n  public readonly flags: ImdlFlags;\n  /** A bounding box no larger than the tile's range, tightly enclosing the tile's geometry; or a null range if the tile is empty */\n  public readonly contentRange: ElementAlignedBox3d;\n  /** The chord tolerance in meters at which the tile's geometry was faceted */\n  public readonly tolerance: number;\n  /** The number of elements which contributed at least some geometry to the tile content */\n  public readonly numElementsIncluded: number;\n  /** The number of elements within the tile range which contributed no geometry to the tile content */\n  public readonly numElementsExcluded: number;\n  /** The total number of bytes in the binary tile data, including this header */\n  public readonly tileLength: number;\n  /** A bitfield wherein each set bit indicates an empty sub-volume. */\n  public readonly emptySubRanges: number;\n\n  public get versionMajor(): number { return this.version >>> 0x10; }\n  public get versionMinor(): number { return (this.version & 0xffff) >>> 0; }\n\n  public get isValid(): boolean { return TileFormat.IModel === this.format; }\n  public get isReadableVersion(): boolean { return this.versionMajor <= CurrentImdlVersion.Major; }\n\n  /** Deserialize a header from the binary data at the stream's current position.\n   * If the binary data does not contain a valid header, the Header will be marked 'invalid'.\n   */\n  public constructor(stream: ByteStream) {\n    super(stream);\n    this.headerLength = stream.readUint32();\n    this.flags = stream.readUint32();\n\n    this.contentRange = new Range3d();\n    nextPoint3d64FromByteStream(stream, this.contentRange.low);\n    nextPoint3d64FromByteStream(stream, this.contentRange.high);\n\n    this.tolerance = stream.readFloat64();\n    this.numElementsIncluded = stream.readUint32();\n    this.numElementsExcluded = stream.readUint32();\n    this.tileLength = stream.readUint32();\n\n    // empty sub-volume bit field introduced in format v02.00\n    this.emptySubRanges = this.versionMajor >= 2 ? stream.readUint32() : 0;\n\n    // Skip any unprocessed bytes in header\n    const remainingHeaderBytes = this.headerLength - stream.curPos;\n    assert(remainingHeaderBytes >= 0);\n    stream.advance(remainingHeaderBytes);\n\n    if (stream.isPastTheEnd)\n      this.invalidate();\n  }\n}\n\n/** Header preceding the feature table embedded in an iMdl tile's content.\n * @internal\n */\nexport class FeatureTableHeader {\n  // The number of bytes the entire table occupies.\n  public readonly length: number;\n  // The number of subcategories in the table.\n  // NOTE: This used to be \"max features\" which was useless and unused. It is only accurate if ImdlFlags.HasMultiModelFeatureTable is set.\n  public readonly numSubCategories: number;\n  // The number of features in the table.\n  public readonly count: number;\n\n  public static readFrom(stream: ByteStream) {\n    const length = stream.readUint32();\n    const maxFeatures = stream.readUint32();\n    const count = stream.readUint32();\n    return stream.isPastTheEnd ? undefined : new FeatureTableHeader(length, maxFeatures, count);\n  }\n\n  public static sizeInBytes = 12;\n\n  private constructor(length: number, numSubCategories: number, count: number) {\n    this.length = length;\n    this.numSubCategories = numSubCategories;\n    this.count = count;\n  }\n}\n"]}
+{"version":3,"file":"IModelTileIO.js","sourceRoot":"","sources":["../../../src/tile/IModelTileIO.ts"],"names":[],"mappings":"AAAA;;;+FAG+F;AAC/F;;GAEG;AAEH,OAAO,EAAE,MAAM,EAAc,MAAM,qBAAqB,CAAC;AACzD,OAAO,EAAE,OAAO,EAAE,MAAM,sBAAsB,CAAC;AAE/C,OAAO,EAAE,2BAA2B,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,UAAU,CAAC;AAE/E;;GAEG;AACH,MAAM,CAAN,IAAY,SAWX;AAXD,WAAY,SAAS;IACnB,uBAAuB;IACvB,yCAAQ,CAAA;IACR,6CAA6C;IAC7C,6DAAuB,CAAA;IACvB,wEAAwE;IACxE,qDAAmB,CAAA;IACnB,mEAAmE;IACnE,2EAA8B,CAAA;IAC9B,uEAAuE;IACvE,8EAA+B,CAAA;AACjC,CAAC,EAXW,SAAS,KAAT,SAAS,QAWpB;AAED;;GAEG;AACH,MAAM,CAAN,IAAY,kBAYX;AAZD,WAAY,kBAAkB;IAC5B;;;OAGG;IACH,8DAAU,CAAA;IACV;;OAEG;IACH,6DAAS,CAAA;IACT,kGAAkG;IAClG,yEAAkC,CAAA;AACpC,CAAC,EAZW,kBAAkB,KAAlB,kBAAkB,QAY7B;AAED;;GAEG;AACH,MAAM,OAAO,UAAW,SAAQ,UAAU;IAwBxC;;OAEG;IACH,YAAmB,MAAkB;QACnC,KAAK,CAAC,MAAM,CAAC,CAAC;QACd,IAAI,CAAC,YAAY,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QACxC,IAAI,CAAC,KAAK,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAEjC,IAAI,CAAC,YAAY,GAAG,IAAI,OAAO,EAAE,CAAC;QAClC,2BAA2B,CAAC,MAAM,EAAE,IAAI,CAAC,YAAY,CAAC,GAAG,CAAC,CAAC;QAC3D,2BAA2B,CAAC,MAAM,EAAE,IAAI,CAAC,YAAY,CAAC,IAAI,CAAC,CAAC;QAE5D,IAAI,CAAC,SAAS,GAAG,MAAM,CAAC,WAAW,EAAE,CAAC;QACtC,IAAI,CAAC,mBAAmB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAC/C,IAAI,CAAC,mBAAmB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAC/C,IAAI,CAAC,UAAU,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAEtC,yDAAyD;QACzD,IAAI,CAAC,cAAc,GAAG,IAAI,CAAC,YAAY,IAAI,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,UAAU,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC;QAEvE,uCAAuC;QACvC,MAAM,oBAAoB,GAAG,IAAI,CAAC,YAAY,GAAG,MAAM,CAAC,MAAM,CAAC;QAC/D,MAAM,CAAC,oBAAoB,IAAI,CAAC,CAAC,CAAC;QAClC,MAAM,CAAC,OAAO,CAAC,oBAAoB,CAAC,CAAC;QAErC,IAAI,MAAM,CAAC,YAAY;YACrB,IAAI,CAAC,UAAU,EAAE,CAAC;IACtB,CAAC;IAjCD,IAAW,YAAY,KAAa,OAAO,IAAI,CAAC,OAAO,KAAK,IAAI,CAAC,CAAC,CAAC;IACnE,IAAW,YAAY,KAAa,OAAO,CAAC,IAAI,CAAC,OAAO,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC;IAE3E,IAAW,OAAO,KAAc,OAAO,UAAU,CAAC,MAAM,KAAK,IAAI,CAAC,MAAM,CAAC,CAAC,CAAC;IAC3E,IAAW,iBAAiB,KAAc,OAAO,IAAI,CAAC,YAAY,IAAI,kBAAkB,CAAC,KAAK,CAAC,CAAC,CAAC;CA8BlG;AAED;;GAEG;AACH,MAAM,OAAO,kBAAkB;IAkB7B,YAAoB,MAAc,EAAE,gBAAwB,EAAE,KAAa;QACzE,IAAI,CAAC,MAAM,GAAG,MAAM,CAAC;QACrB,IAAI,CAAC,gBAAgB,GAAG,gBAAgB,CAAC;QACzC,IAAI,CAAC,KAAK,GAAG,KAAK,CAAC;IACrB,CAAC;IAbM,MAAM,CAAC,QAAQ,CAAC,MAAkB;QACvC,MAAM,MAAM,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QACnC,MAAM,WAAW,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QACxC,MAAM,KAAK,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAClC,OAAO,MAAM,CAAC,YAAY,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,IAAI,kBAAkB,CAAC,MAAM,EAAE,WAAW,EAAE,KAAK,CAAC,CAAC;IAC9F,CAAC;;AAEa,8BAAW,GAAG,EAAE,CAAC","sourcesContent":["/*---------------------------------------------------------------------------------------------\r\n* Copyright (c) Bentley Systems, Incorporated. All rights reserved.\r\n* See LICENSE.md in the project root for license terms and full copyright notice.\r\n*--------------------------------------------------------------------------------------------*/\r\n/** @packageDocumentation\r\n * @module Tile\r\n */\r\n\r\nimport { assert, ByteStream } from \"@itwin/core-bentley\";\r\nimport { Range3d } from \"@itwin/core-geometry\";\r\nimport { ElementAlignedBox3d } from \"../geometry/Placement\";\r\nimport { nextPoint3d64FromByteStream, TileFormat, TileHeader } from \"./TileIO\";\r\n\r\n/** Flags describing the geometry contained within a tile in iMdl format.\r\n * @internal\r\n */\r\nexport enum ImdlFlags {\r\n  /** No special flags */\r\n  None = 0,\r\n  /** The tile contains some curved geometry */\r\n  ContainsCurves = 1 << 0,\r\n  /** Some geometry within the tile range was omitted based on its size */\r\n  Incomplete = 1 << 2,\r\n  /** The tile must be refined by sub-division, not magnification. */\r\n  DisallowMagnification = 1 << 3,\r\n  /** The tile's feature table contains features from multiple models. */\r\n  MultiModelFeatureTable = 1 << 4,\r\n}\r\n\r\n/** Describes the maximum major and minor version of the iMdl tile format supported by this version of this package.\r\n * @internal\r\n */\r\nexport enum CurrentImdlVersion {\r\n  /** The unsigned 16-bit major version number. If the major version specified in the tile header is greater than this value, then this\r\n   * front-end is not capable of reading the tile content. Otherwise, this front-end can read the tile content even if the header specifies a\r\n   * greater minor version than CurrentVersion.Minor, although some data may be skipped.\r\n   */\r\n  Major = 30,\r\n  /** The unsigned 16-bit minor version number. If the major version in the tile header is equal to CurrentVersion.Major, then this package can\r\n   * read the tile content even if the minor version in the tile header is greater than this value, although some data may be skipped.\r\n   */\r\n  Minor = 0,\r\n  /** The unsigned 32-bit version number derived from the 16-bit major and minor version numbers. */\r\n  Combined = (Major << 0x10) | Minor,\r\n}\r\n\r\n/** Header embedded at the beginning of binary tile data in iMdl format describing its contents.\r\n * @internal\r\n */\r\nexport class ImdlHeader extends TileHeader {\r\n  /** The size of this header in bytes. */\r\n  public readonly headerLength: number;\r\n  /** Flags describing the geometry contained within the tile */\r\n  public readonly flags: ImdlFlags;\r\n  /** A bounding box no larger than the tile's range, tightly enclosing the tile's geometry; or a null range if the tile is empty */\r\n  public readonly contentRange: ElementAlignedBox3d;\r\n  /** The chord tolerance in meters at which the tile's geometry was faceted */\r\n  public readonly tolerance: number;\r\n  /** The number of elements which contributed at least some geometry to the tile content */\r\n  public readonly numElementsIncluded: number;\r\n  /** The number of elements within the tile range which contributed no geometry to the tile content */\r\n  public readonly numElementsExcluded: number;\r\n  /** The total number of bytes in the binary tile data, including this header */\r\n  public readonly tileLength: number;\r\n  /** A bitfield wherein each set bit indicates an empty sub-volume. */\r\n  public readonly emptySubRanges: number;\r\n\r\n  public get versionMajor(): number { return this.version >>> 0x10; }\r\n  public get versionMinor(): number { return (this.version & 0xffff) >>> 0; }\r\n\r\n  public get isValid(): boolean { return TileFormat.IModel === this.format; }\r\n  public get isReadableVersion(): boolean { return this.versionMajor <= CurrentImdlVersion.Major; }\r\n\r\n  /** Deserialize a header from the binary data at the stream's current position.\r\n   * If the binary data does not contain a valid header, the Header will be marked 'invalid'.\r\n   */\r\n  public constructor(stream: ByteStream) {\r\n    super(stream);\r\n    this.headerLength = stream.readUint32();\r\n    this.flags = stream.readUint32();\r\n\r\n    this.contentRange = new Range3d();\r\n    nextPoint3d64FromByteStream(stream, this.contentRange.low);\r\n    nextPoint3d64FromByteStream(stream, this.contentRange.high);\r\n\r\n    this.tolerance = stream.readFloat64();\r\n    this.numElementsIncluded = stream.readUint32();\r\n    this.numElementsExcluded = stream.readUint32();\r\n    this.tileLength = stream.readUint32();\r\n\r\n    // empty sub-volume bit field introduced in format v02.00\r\n    this.emptySubRanges = this.versionMajor >= 2 ? stream.readUint32() : 0;\r\n\r\n    // Skip any unprocessed bytes in header\r\n    const remainingHeaderBytes = this.headerLength - stream.curPos;\r\n    assert(remainingHeaderBytes >= 0);\r\n    stream.advance(remainingHeaderBytes);\r\n\r\n    if (stream.isPastTheEnd)\r\n      this.invalidate();\r\n  }\r\n}\r\n\r\n/** Header preceding the feature table embedded in an iMdl tile's content.\r\n * @internal\r\n */\r\nexport class FeatureTableHeader {\r\n  // The number of bytes the entire table occupies.\r\n  public readonly length: number;\r\n  // The number of subcategories in the table.\r\n  // NOTE: This used to be \"max features\" which was useless and unused. It is only accurate if ImdlFlags.HasMultiModelFeatureTable is set.\r\n  public readonly numSubCategories: number;\r\n  // The number of features in the table.\r\n  public readonly count: number;\r\n\r\n  public static readFrom(stream: ByteStream) {\r\n    const length = stream.readUint32();\r\n    const maxFeatures = stream.readUint32();\r\n    const count = stream.readUint32();\r\n    return stream.isPastTheEnd ? undefined : new FeatureTableHeader(length, maxFeatures, count);\r\n  }\r\n\r\n  public static sizeInBytes = 12;\r\n\r\n  private constructor(length: number, numSubCategories: number, count: number) {\r\n    this.length = length;\r\n    this.numSubCategories = numSubCategories;\r\n    this.count = count;\r\n  }\r\n}\r\n"]}

package/lib/esm/tile/PntsTileIO.d.ts

@@ -1,18 +1,18 @@
-/** @packageDocumentation
- * @module Tile
- */
-import { ByteStream } from "@itwin/core-bentley";
-import { TileHeader } from "./TileIO";
-/** Header preceding tile content in [pnts](https://github.com/AnalyticalGraphicsInc/3d-tiles/tree/master/specification/TileFormats/PointCloud) format.
- * @internal
- */
-export declare class PntsHeader extends TileHeader {
-    readonly length: number;
-    readonly featureTableJsonLength: number;
-    readonly featureTableBinaryLength: number;
-    readonly batchTableJsonLength: number;
-    readonly batchTableBinaryLength: number;
-    get isValid(): boolean;
-    constructor(stream: ByteStream);
-}
+/** @packageDocumentation
+ * @module Tile
+ */
+import { ByteStream } from "@itwin/core-bentley";
+import { TileHeader } from "./TileIO";
+/** Header preceding tile content in [pnts](https://github.com/AnalyticalGraphicsInc/3d-tiles/tree/master/specification/TileFormats/PointCloud) format.
+ * @internal
+ */
+export declare class PntsHeader extends TileHeader {
+    readonly length: number;
+    readonly featureTableJsonLength: number;
+    readonly featureTableBinaryLength: number;
+    readonly batchTableJsonLength: number;
+    readonly batchTableBinaryLength: number;
+    get isValid(): boolean;
+    constructor(stream: ByteStream);
+}
 //# sourceMappingURL=PntsTileIO.d.ts.map

package/lib/esm/tile/PntsTileIO.js

@@ -1,23 +1,23 @@
-/*---------------------------------------------------------------------------------------------
-* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
-* See LICENSE.md in the project root for license terms and full copyright notice.
-*--------------------------------------------------------------------------------------------*/
-/** @packageDocumentation
- * @module Tile
- */
-import { TileFormat, TileHeader } from "./TileIO";
-/** Header preceding tile content in [pnts](https://github.com/AnalyticalGraphicsInc/3d-tiles/tree/master/specification/TileFormats/PointCloud) format.
- * @internal
- */
-export class PntsHeader extends TileHeader {
-    constructor(stream) {
-        super(stream);
-        this.length = stream.readUint32();
-        this.featureTableJsonLength = stream.readUint32();
-        this.featureTableBinaryLength = stream.readUint32();
-        this.batchTableJsonLength = stream.readUint32();
-        this.batchTableBinaryLength = stream.readUint32();
-    }
-    get isValid() { return TileFormat.Pnts === this.format; }
-}
+/*---------------------------------------------------------------------------------------------
+* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
+* See LICENSE.md in the project root for license terms and full copyright notice.
+*--------------------------------------------------------------------------------------------*/
+/** @packageDocumentation
+ * @module Tile
+ */
+import { TileFormat, TileHeader } from "./TileIO";
+/** Header preceding tile content in [pnts](https://github.com/AnalyticalGraphicsInc/3d-tiles/tree/master/specification/TileFormats/PointCloud) format.
+ * @internal
+ */
+export class PntsHeader extends TileHeader {
+    constructor(stream) {
+        super(stream);
+        this.length = stream.readUint32();
+        this.featureTableJsonLength = stream.readUint32();
+        this.featureTableBinaryLength = stream.readUint32();
+        this.batchTableJsonLength = stream.readUint32();
+        this.batchTableBinaryLength = stream.readUint32();
+    }
+    get isValid() { return TileFormat.Pnts === this.format; }
+}
 //# sourceMappingURL=PntsTileIO.js.map

package/lib/esm/tile/PntsTileIO.js.map

@@ -1 +1 @@
-{"version":3,"file":"PntsTileIO.js","sourceRoot":"","sources":["../../../src/tile/PntsTileIO.ts"],"names":[],"mappings":"AAAA;;;+FAG+F;AAC/F;;GAEG;AAGH,OAAO,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,UAAU,CAAC;AAElD;;GAEG;AACH,MAAM,OAAO,UAAW,SAAQ,UAAU;IAQxC,YAAmB,MAAkB;QACnC,KAAK,CAAC,MAAM,CAAC,CAAC;QACd,IAAI,CAAC,MAAM,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAClC,IAAI,CAAC,sBAAsB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAClD,IAAI,CAAC,wBAAwB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QACpD,IAAI,CAAC,oBAAoB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAChD,IAAI,CAAC,sBAAsB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;IACpD,CAAC;IATD,IAAW,OAAO,KAAc,OAAO,UAAU,CAAC,IAAI,KAAK,IAAI,CAAC,MAAM,CAAC,CAAC,CAAC;CAU1E","sourcesContent":["/*---------------------------------------------------------------------------------------------\n* Copyright (c) Bentley Systems, Incorporated. All rights reserved.\n* See LICENSE.md in the project root for license terms and full copyright notice.\n*--------------------------------------------------------------------------------------------*/\n/** @packageDocumentation\n * @module Tile\n */\n\nimport { ByteStream } from \"@itwin/core-bentley\";\nimport { TileFormat, TileHeader } from \"./TileIO\";\n\n/** Header preceding tile content in [pnts](https://github.com/AnalyticalGraphicsInc/3d-tiles/tree/master/specification/TileFormats/PointCloud) format.\n * @internal\n */\nexport class PntsHeader extends TileHeader {\n  public readonly length: number;\n  public readonly featureTableJsonLength: number;\n  public readonly featureTableBinaryLength: number;\n  public readonly batchTableJsonLength: number;\n  public readonly batchTableBinaryLength: number;\n  public get isValid(): boolean { return TileFormat.Pnts === this.format; }\n\n  public constructor(stream: ByteStream) {\n    super(stream);\n    this.length = stream.readUint32();\n    this.featureTableJsonLength = stream.readUint32();\n    this.featureTableBinaryLength = stream.readUint32();\n    this.batchTableJsonLength = stream.readUint32();\n    this.batchTableBinaryLength = stream.readUint32();\n  }\n}\n"]}
+{"version":3,"file":"PntsTileIO.js","sourceRoot":"","sources":["../../../src/tile/PntsTileIO.ts"],"names":[],"mappings":"AAAA;;;+FAG+F;AAC/F;;GAEG;AAGH,OAAO,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,UAAU,CAAC;AAElD;;GAEG;AACH,MAAM,OAAO,UAAW,SAAQ,UAAU;IAQxC,YAAmB,MAAkB;QACnC,KAAK,CAAC,MAAM,CAAC,CAAC;QACd,IAAI,CAAC,MAAM,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAClC,IAAI,CAAC,sBAAsB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAClD,IAAI,CAAC,wBAAwB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QACpD,IAAI,CAAC,oBAAoB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;QAChD,IAAI,CAAC,sBAAsB,GAAG,MAAM,CAAC,UAAU,EAAE,CAAC;IACpD,CAAC;IATD,IAAW,OAAO,KAAc,OAAO,UAAU,CAAC,IAAI,KAAK,IAAI,CAAC,MAAM,CAAC,CAAC,CAAC;CAU1E","sourcesContent":["/*---------------------------------------------------------------------------------------------\r\n* Copyright (c) Bentley Systems, Incorporated. All rights reserved.\r\n* See LICENSE.md in the project root for license terms and full copyright notice.\r\n*--------------------------------------------------------------------------------------------*/\r\n/** @packageDocumentation\r\n * @module Tile\r\n */\r\n\r\nimport { ByteStream } from \"@itwin/core-bentley\";\r\nimport { TileFormat, TileHeader } from \"./TileIO\";\r\n\r\n/** Header preceding tile content in [pnts](https://github.com/AnalyticalGraphicsInc/3d-tiles/tree/master/specification/TileFormats/PointCloud) format.\r\n * @internal\r\n */\r\nexport class PntsHeader extends TileHeader {\r\n  public readonly length: number;\r\n  public readonly featureTableJsonLength: number;\r\n  public readonly featureTableBinaryLength: number;\r\n  public readonly batchTableJsonLength: number;\r\n  public readonly batchTableBinaryLength: number;\r\n  public get isValid(): boolean { return TileFormat.Pnts === this.format; }\r\n\r\n  public constructor(stream: ByteStream) {\r\n    super(stream);\r\n    this.length = stream.readUint32();\r\n    this.featureTableJsonLength = stream.readUint32();\r\n    this.featureTableBinaryLength = stream.readUint32();\r\n    this.batchTableJsonLength = stream.readUint32();\r\n    this.batchTableBinaryLength = stream.readUint32();\r\n  }\r\n}\r\n"]}

package/lib/esm/tile/TileIO.d.ts

@@ -1,67 +1,67 @@
-/** @packageDocumentation
- * @module Tile
- */
-import { BentleyError, ByteStream } from "@itwin/core-bentley";
-import { Point3d } from "@itwin/core-geometry";
-/** Type codes for various tile formats. Often these are embedded as 32-bit 'magic numbers' in a binary stream to indicate the format.
- * @internal
- */
-export declare enum TileFormat {
-    Unknown = 0,
-    B3dm = 1835283298,
-    Gltf = 1179937895,
-    Pnts = 1937010288,
-    IModel = 1818512745,
-    Cmpt = 1953525091,
-    I3dm = 1835283305,
-    A3x = 5780289
-}
-/** Given a magic number, return whether it identifies a known tile format.
- * @internal
- */
-export declare function isKnownTileFormat(format: number): boolean;
-/** Given a magic number, attempt to convert it to a known TileFormat.
- * @internal
- */
-export declare function tileFormatFromNumber(formatNumber: number): TileFormat;
-/** Status codes for tile reading operations
- * @internal
- */
-export declare enum TileReadStatus {
-    Success = 0,
-    InvalidTileData = 1,
-    InvalidHeader = 2,
-    InvalidBatchTable = 3,
-    InvalidScene = 4,
-    InvalidFeatureTable = 5,
-    NewerMajorVersion = 6,
-    Canceled = 7
-}
-/** Exception thrown by functions that deserialize tiles.
- * @internal
- */
-export declare class TileReadError extends BentleyError {
-    constructor(status: TileReadStatus, message?: string);
-    get wasCanceled(): boolean;
-}
-/** The base header preceding tile data of most formats, identifying the tile format and version of that format.
- * Specific tile formats may define their own headers as sub-types of this Header, appending
- * additional format-specific data.
- * @internal
- */
-export declare abstract class TileHeader {
-    private _format;
-    version: number;
-    /** Construct a Header from the binary data at the supplied stream's current read position */
-    constructor(stream: ByteStream);
-    get format(): TileFormat;
-    /** Returns whether the header represents valid data */
-    abstract get isValid(): boolean;
-    /** Mark the header as representing invalid data */
-    protected invalidate(): void;
-}
-/** Read 3 64-bit floating point numbers at the byte stream's current read position, advance by 24 bytes, and return a Point3d constructed from the 3 numbers.
- * @internal
- */
-export declare function nextPoint3d64FromByteStream(stream: ByteStream, result?: Point3d): Point3d;
+/** @packageDocumentation
+ * @module Tile
+ */
+import { BentleyError, ByteStream } from "@itwin/core-bentley";
+import { Point3d } from "@itwin/core-geometry";
+/** Type codes for various tile formats. Often these are embedded as 32-bit 'magic numbers' in a binary stream to indicate the format.
+ * @internal
+ */
+export declare enum TileFormat {
+    Unknown = 0,
+    B3dm = 1835283298,
+    Gltf = 1179937895,
+    Pnts = 1937010288,
+    IModel = 1818512745,
+    Cmpt = 1953525091,
+    I3dm = 1835283305,
+    A3x = 5780289
+}
+/** Given a magic number, return whether it identifies a known tile format.
+ * @internal
+ */
+export declare function isKnownTileFormat(format: number): boolean;
+/** Given a magic number, attempt to convert it to a known TileFormat.
+ * @internal
+ */
+export declare function tileFormatFromNumber(formatNumber: number): TileFormat;
+/** Status codes for tile reading operations
+ * @internal
+ */
+export declare enum TileReadStatus {
+    Success = 0,
+    InvalidTileData = 1,
+    InvalidHeader = 2,
+    InvalidBatchTable = 3,
+    InvalidScene = 4,
+    InvalidFeatureTable = 5,
+    NewerMajorVersion = 6,
+    Canceled = 7
+}
+/** Exception thrown by functions that deserialize tiles.
+ * @internal
+ */
+export declare class TileReadError extends BentleyError {
+    constructor(status: TileReadStatus, message?: string);
+    get wasCanceled(): boolean;
+}
+/** The base header preceding tile data of most formats, identifying the tile format and version of that format.
+ * Specific tile formats may define their own headers as sub-types of this Header, appending
+ * additional format-specific data.
+ * @internal
+ */
+export declare abstract class TileHeader {
+    private _format;
+    version: number;
+    /** Construct a Header from the binary data at the supplied stream's current read position */
+    constructor(stream: ByteStream);
+    get format(): TileFormat;
+    /** Returns whether the header represents valid data */
+    abstract get isValid(): boolean;
+    /** Mark the header as representing invalid data */
+    protected invalidate(): void;
+}
+/** Read 3 64-bit floating point numbers at the byte stream's current read position, advance by 24 bytes, and return a Point3d constructed from the 3 numbers.
+ * @internal
+ */
+export declare function nextPoint3d64FromByteStream(stream: ByteStream, result?: Point3d): Point3d;
 //# sourceMappingURL=TileIO.d.ts.map