@itwin/core-common 3.4.0-dev.8 → 3.5.0-dev.4

package/lib/cjs/IModel.d.ts

@@ -1,356 +1,356 @@
-/** @packageDocumentation
- * @module iModels
- */
-import { BeEvent, GuidString, Id64String, OpenMode } from "@itwin/core-bentley";
-import { Angle, Point3d, Range3dProps, Transform, Vector3d, XYAndZ, XYZProps, YawPitchRollAngles, YawPitchRollProps } from "@itwin/core-geometry";
-import { ChangesetIdWithIndex } from "./ChangesetProps";
-import { Cartographic, CartographicProps } from "./geometry/Cartographic";
-import { GeographicCRS, GeographicCRSProps } from "./geometry/CoordinateReferenceSystem";
-import { AxisAlignedBox3d } from "./geometry/Placement";
-import { ThumbnailProps } from "./Thumbnail";
-/** The properties to open a connection to an iModel for RPC operations.
- * @public
- */
-export interface IModelRpcOpenProps {
-    /** The iTwin in which the iModel exists - must be defined for briefcases that are synchronized with iModelHub. */
-    readonly iTwinId?: GuidString;
-    /** Guid of the iModel. */
-    readonly iModelId?: GuidString;
-    /** Id of the last Changeset that was applied to the iModel - must be defined for briefcases that are synchronized with iModelHub.
-     * @note Changeset Ids are string hash values based on the content and parent.
-     */
-    readonly changeset?: ChangesetIdWithIndex;
-}
-/** The properties that identify an opened iModel for RPC operations.
- * @public
- */
-export interface IModelRpcProps extends IModelRpcOpenProps {
-    /** Unique key used for identifying the iModel between the frontend and the backend */
-    readonly key: string;
-}
-/** Properties that position an iModel on the earth via [ECEF](https://en.wikipedia.org/wiki/ECEF) (Earth Centered Earth Fixed) coordinates
- * The origin is specified as an ECEF coordinate. The cartographicOrigin property contains the latitude, longitude and elevation above the WGS84 ellipsoid
- * of the origin property. This cartographicOrigin is offered as a convenient pre-calculated value representing the location of the ECEF origin.
- * The 3D coordinate system this class represents is positioned at specified origin and the axis positioned according to
- * the other properties.
- * If the xVector and yVector properties are defined then they take precedence over the YawPitchRoll orientation property. The xVector and yVector
- * represent the direction and scale of the X and Y axes. The Z axis is always perpendicular (according to the right hand rule) to these X-Y axes.
- * The scaling in the Z direction is always unity. The scale of the X and Y axes is represented by the size of the vector length.
- * If the xVector and yVector are not present then the YawPitchRoll properties indicates the angles for all tree axes. Scaling in that case
- * is unity in all three directions.
- * Note that the present class is intended to represent geolocated 3D coordinate systems that are normally tangent to the WGS84 ellipsoid
- * possibly offset in altitude by the terrain elevation above the ellipsoid but other general 3D coordinate systems
- * can be defined.
- * @public
- * @extensions
- */
-export interface EcefLocationProps {
-    /** The Origin of an iModel on the earth in ECEF coordinates */
-    readonly origin: XYZProps;
-    /** The [orientation](https://en.wikipedia.org/wiki/Geographic_coordinate_conversion) of an iModel on the earth. */
-    readonly orientation: YawPitchRollProps;
-    /** Optional position on the earth used to establish the ECEF coordinates. */
-    readonly cartographicOrigin?: CartographicProps;
-    /** Optional X column vector used with [[yVector]] to calculate potentially non-rigid transform if a projection is present. */
-    readonly xVector?: XYZProps;
-    /** Optional Y column vector used with [[xVector]] to calculate potentially non-rigid transform if a projection is present. */
-    readonly yVector?: XYZProps;
-}
-/** Properties of the [Root Subject]($docs/bis/guide/references/glossary#subject-root).
- * @public
- * @extensions
- */
-export interface RootSubjectProps {
-    /** The name of the root subject. */
-    readonly name: string;
-    /** Description of the root subject (optional). */
-    readonly description?: string;
-}
-/** Properties of an iModel that are always held in memory whenever one is opened, both on the frontend and on the backend .
- * @public
- */
-export interface IModelProps {
-    /** The name and description of the root subject of this iModel */
-    readonly rootSubject: RootSubjectProps;
-    /** The volume of the entire project, in spatial coordinates */
-    readonly projectExtents?: Range3dProps;
-    /** An offset to be applied to all spatial coordinates. This is normally used to transform spatial coordinates into the Cartesian coordinate system of a Geographic Coordinate System. */
-    readonly globalOrigin?: XYZProps;
-    /** The location of the iModel in Earth Centered Earth Fixed coordinates. iModel units are always meters */
-    readonly ecefLocation?: EcefLocationProps;
-    /** The Geographic Coordinate Reference System indicating the projection and datum used. */
-    readonly geographicCoordinateSystem?: GeographicCRSProps;
-    /** The name of the iModel. */
-    readonly name?: string;
-}
-/** The properties returned by the backend when creating a new [[IModelConnection]] from the frontend, either with Rpc or with Ipc.
- * These properties describe the iModel held on the backend for thew newly formed connection and are used to construct a new
- * [[IModelConnection]] instance on the frontend to access it.
- * @public
- */
-export declare type IModelConnectionProps = IModelProps & IModelRpcProps;
-/** The properties that can be supplied when creating a *new* iModel.
- * @public
- */
-export interface CreateIModelProps extends IModelProps {
-    /** The GUID of new iModel. If not present, a GUID will be generated. */
-    readonly guid?: GuidString;
-    /** Client name for new iModel */
-    readonly client?: string;
-    /** Thumbnail for new iModel
-     * @alpha
-     */
-    readonly thumbnail?: ThumbnailProps;
-}
-/**
- * Encryption-related properties that can be supplied when creating or opening snapshot iModels.
- * NOTE: Encrypted iModels are no longer supported since they require licensed code.
- * @public
- * @deprecated
- */
-export interface IModelEncryptionProps {
-    /** The password used to encrypt/decrypt the snapshot iModel. */
-    readonly password?: string;
-}
-/**
- * A key used to identify an opened [IModelDb]($backend) between the frontend and backend for Rpc and Ipc communications.
- * Keys must be unique - that is there can never be two IModelDbs opened with the same key at any given time.
- * If no key is supplied in a call to open an IModelDb, one is generated and returned.
- * It is only necessary to supply a key if you have some reason to assign a specific value to identify an IModelDb.
- * If you don't supply the key, you must use the returned value for Rpc and Ipc communications.
- * @public
- */
-export interface OpenDbKey {
-    readonly key?: string;
-}
-/** @beta TODO documentation */
-export interface CloudContainerUri {
-    readonly uriParams: string;
-}
-/** Options to open a [SnapshotDb]($backend).
- * @public
- */
-export interface SnapshotOpenOptions extends IModelEncryptionProps, OpenDbKey {
-    /**
-     * The "base" name that can be used for creating temporary files related to this Db.
-     * The string should be a name related to the current Db filename using some known pattern so that all files named "baseName*" can be deleted externally during cleanup.
-     * It must be the name of a file (that may or may not exist) in a writable directory.
-     * If not present, the baseName will default to the database's file name (including the path).
-     * @internal
-     */
-    readonly tempFileBase?: string;
-}
-/** Options to open a [StandaloneDb]($backend) via [StandaloneDb.openFile]($backend) from the backend,
- * or [BriefcaseConnection.openStandalone]($frontend) from the frontend.
- * @public
- */
-export declare type StandaloneOpenOptions = OpenDbKey;
-/** Options that can be supplied when creating snapshot iModels.
- * @public
- */
-export interface CreateSnapshotIModelProps extends IModelEncryptionProps {
-    /** If true, then create SQLite views for Model, Element, ElementAspect, and Relationship classes.
-     * These database views can often be useful for interoperability workflows.
-     */
-    readonly createClassViews?: boolean;
-}
-/** The options that can be specified when creating an *empty* snapshot iModel.
- * @see [SnapshotDb.createEmpty]($backend)
- * @public
- */
-export declare type CreateEmptySnapshotIModelProps = CreateIModelProps & CreateSnapshotIModelProps;
-/** Options that can be supplied when creating standalone iModels.
- * @internal
- */
-export interface CreateStandaloneIModelProps extends IModelEncryptionProps {
-    /** If present, file will allow local editing, but cannot be used to create changesets */
-    readonly allowEdit?: string;
-}
-/** The options that can be specified when creating an *empty* standalone iModel.
- * @see [standalone.createEmpty]($backend)
- * @internal
- */
-export declare type CreateEmptyStandaloneIModelProps = CreateIModelProps & CreateStandaloneIModelProps;
-/**
- * @public
- * @extensions
- */
-export interface FilePropertyProps {
-    readonly namespace: string;
-    readonly name: string;
-    id?: number | string;
-    subId?: number | string;
-}
-/** The position and orientation of an iModel on the earth in [ECEF](https://en.wikipedia.org/wiki/ECEF) (Earth Centered Earth Fixed) coordinates
- * @note This is an immutable type - all of its properties are frozen.
- * @see [GeoLocation of iModels]($docs/learning/GeoLocation.md)
- * @public
- */
-export declare class EcefLocation implements EcefLocationProps {
-    /** The origin of the ECEF transform. */
-    readonly origin: Point3d;
-    /** The orientation of the ECEF transform */
-    readonly orientation: YawPitchRollAngles;
-    /** Optional position on the earth used to establish the ECEF origin and orientation. */
-    readonly cartographicOrigin?: Cartographic;
-    /** Optional X column vector used with [[yVector]] to calculate potentially non-rigid transform if a projection is present. */
-    readonly xVector?: Vector3d;
-    /** Optional Y column vector used with [[xVector]] to calculate potentially non-rigid transform if a projection is present. */
-    readonly yVector?: Vector3d;
-    private readonly _transform;
-    /** Get the transform from iModel Spatial coordinates to ECEF from this EcefLocation */
-    getTransform(): Transform;
-    /** Construct a new EcefLocation. Once constructed, it is frozen and cannot be modified. */
-    constructor(props: EcefLocationProps);
-    /** Construct ECEF Location from cartographic origin with optional known point and angle.   */
-    static createFromCartographicOrigin(origin: Cartographic, point?: Point3d, angle?: Angle): EcefLocation;
-    /** Get the location center of the earth in the iModel coordinate system. */
-    get earthCenter(): Point3d;
-    /** Return true if this location is equivalent to another location within a small tolerance. */
-    isAlmostEqual(other: EcefLocation): boolean;
-    toJSON(): EcefLocationProps;
-}
-/** Represents an iModel in JavaScript.
- * @see [GeoLocation of iModels]($docs/learning/GeoLocation.md)
- * @public
- */
-export declare abstract class IModel implements IModelProps {
-    private _projectExtents?;
-    private _name?;
-    private _rootSubject?;
-    private _globalOrigin?;
-    private _ecefLocation?;
-    private _geographicCoordinateSystem?;
-    private _iModelId?;
-    /** The Id of the repository model. */
-    static readonly repositoryModelId: Id64String;
-    /** The Id of the root subject element. */
-    static readonly rootSubjectId: Id64String;
-    /** The Id of the dictionary model. */
-    static readonly dictionaryId: Id64String;
-    /** Event raised after [[name]] changes. */
-    readonly onNameChanged: BeEvent<(previousName: string) => void>;
-    /** Event raised after [[rootSubject]] changes. */
-    readonly onRootSubjectChanged: BeEvent<(previousSubject: RootSubjectProps) => void>;
-    /** Event raised after [[projectExtents]] changes. */
-    readonly onProjectExtentsChanged: BeEvent<(previousExtents: AxisAlignedBox3d) => void>;
-    /** Event raised after [[globalOrigin]] changes. */
-    readonly onGlobalOriginChanged: BeEvent<(previousOrigin: Point3d) => void>;
-    /** Event raised after [[ecefLocation]] changes. */
-    readonly onEcefLocationChanged: BeEvent<(previousLocation: EcefLocation | undefined) => void>;
-    /** Event raised after [[geographicCoordinateSystem]] changes. */
-    readonly onGeographicCoordinateSystemChanged: BeEvent<(previousGCS: GeographicCRS | undefined) => void>;
-    /** Name of the iModel */
-    get name(): string;
-    set name(name: string);
-    /** The name and description of the root subject of this iModel */
-    get rootSubject(): RootSubjectProps;
-    set rootSubject(subject: RootSubjectProps);
-    /** Returns `true` if this is a snapshot iModel. */
-    abstract get isSnapshot(): boolean;
-    /** Returns `true` if this is a briefcase copy of an iModel that is synchronized with iModelHub. */
-    abstract get isBriefcase(): boolean;
-    abstract get isOpen(): boolean;
-    /**
-     * The volume, in spatial coordinates, inside which the entire project is contained.
-     * @note The object returned from this method is frozen. You *must* make a copy before you do anything that might attempt to modify it.
-     */
-    get projectExtents(): AxisAlignedBox3d;
-    set projectExtents(extents: AxisAlignedBox3d);
-    /** An offset to be applied to all spatial coordinates. */
-    get globalOrigin(): Point3d;
-    set globalOrigin(org: Point3d);
-    /** The [EcefLocation]($docs/learning/glossary#ecefLocation) of the iModel in Earth Centered Earth Fixed coordinates.
-     * If the iModel property geographicCoordinateSystem is not defined then the ecefLocation provides a geolocation by defining a
-     * 3D coordinate system relative to the Earth model WGS84. Refer to additional documentation for details. If the geographicCoordinateSystem
-     * property is defined then the ecefLocation must be used with care. When the geographicCoordinateSystem is defined it indicates the
-     * iModel cartesian space is the result of a cartographic projection. This implies a flattening of the Earth surface process that
-     * results in scale, angular or area distortion. The ecefLocation is then an approximation calculated at the center of the project extent.
-     * If the project is more than 2 kilometer in size, the ecefLocation may represent a poor approximation of the effective
-     * cartographic projection used and a linear transformation should then be calculated at the exact origin of the data
-     * it must position.
-     * @see [GeoLocation of iModels]($docs/learning/GeoLocation.md)
-    */
-    get ecefLocation(): EcefLocation | undefined;
-    set ecefLocation(ecefLocation: EcefLocation | undefined);
-    /** Set the [EcefLocation]($docs/learning/glossary#ecefLocation) for this iModel. */
-    setEcefLocation(ecef: EcefLocationProps): void;
-    /** The geographic coordinate reference system of the iModel. */
-    get geographicCoordinateSystem(): GeographicCRS | undefined;
-    set geographicCoordinateSystem(geoCRS: GeographicCRS | undefined);
-    /** Sets the geographic coordinate reference system from GeographicCRSProps. */
-    setGeographicCoordinateSystem(geoCRS: GeographicCRSProps): void;
-    /** @internal */
-    getConnectionProps(): IModelConnectionProps;
-    /** @internal */
-    toJSON(): IModelConnectionProps;
-    /** A key used to identify this iModel in RPC calls from frontend to backend.
-     * @internal
-     */
-    protected _fileKey: string;
-    /** Get the key that was used to open this iModel. This is the value used for Rpc and Ipc communications. */
-    get key(): string;
-    /** @internal */
-    protected _iTwinId?: GuidString;
-    /** The Guid that identifies the iTwin that owns this iModel. */
-    get iTwinId(): GuidString | undefined;
-    /** The Guid that identifies this iModel. */
-    get iModelId(): GuidString | undefined;
-    /** @public */
-    changeset: ChangesetIdWithIndex;
-    protected _openMode: OpenMode;
-    /** The [[OpenMode]] used for this IModel. */
-    get openMode(): OpenMode;
-    /** Return a token for RPC operations.
-     * @throws IModelError if the iModel is not open.
-     */
-    getRpcProps(): IModelRpcProps;
-    /** Returns the iModel's RPC properties.
-     * @note It is an error to attempt to use these properties as a token for RPC operations if the iModel is not open.
-     * @internal
-     */
-    protected _getRpcProps(): IModelRpcProps;
-    /** @internal */
-    protected constructor(tokenProps?: IModelRpcProps);
-    /** @internal */
-    protected initialize(name: string, props: IModelProps): void;
-    /** Get the default subCategoryId for the supplied categoryId */
-    static getDefaultSubCategoryId(categoryId: Id64String): Id64String;
-    /** True if this iModel has an [EcefLocation]($docs/learning/glossary#ecefLocation). */
-    get isGeoLocated(): boolean;
-    /** Get the Transform from this iModel's Spatial coordinates to ECEF coordinates using its [[IModel.ecefLocation]].
-     * @throws IModelError if [[isGeoLocated]] is false.
-     */
-    getEcefTransform(): Transform;
-    /** Convert a point in this iModel's Spatial coordinates to an ECEF point using its [[IModel.ecefLocation]].
-     * @param spatial A point in the iModel's spatial coordinates
-     * @param result If defined, use this for output
-     * @returns A Point3d in ECEF coordinates
-     * @throws IModelError if [[isGeoLocated]] is false.
-     */
-    spatialToEcef(spatial: XYAndZ, result?: Point3d): Point3d;
-    /** Convert a point in ECEF coordinates to a point in this iModel's Spatial coordinates using its [[ecefLocation]].
-     * @param ecef A point in ECEF coordinates
-     * @param result If defined, use this for output
-     * @returns A Point3d in this iModel's spatial coordinates
-     * @throws IModelError if [[isGeoLocated]] is false.
-     * @note The resultant point will only be meaningful if the ECEF coordinate is close on the earth to the iModel.
-     */
-    ecefToSpatial(ecef: XYAndZ, result?: Point3d): Point3d;
-    /** Convert a point in this iModel's Spatial coordinates to a [[Cartographic]] using its [[IModel.ecefLocation]].
-     * @param spatial A point in the iModel's spatial coordinates
-     * @param result If defined, use this for output
-     * @returns A Cartographic location
-     * @throws IModelError if [[isGeoLocated]] is false.
-     */
-    spatialToCartographicFromEcef(spatial: XYAndZ, result?: Cartographic): Cartographic;
-    /** Convert a [[Cartographic]] to a point in this iModel's Spatial coordinates using its [[IModel.ecefLocation]].
-     * @param cartographic A cartographic location
-     * @param result If defined, use this for output
-     * @returns A point in this iModel's spatial coordinates
-     * @throws IModelError if [[isGeoLocated]] is false.
-     * @note The resultant point will only be meaningful if the ECEF coordinate is close on the earth to the iModel.
-     */
-    cartographicToSpatialFromEcef(cartographic: Cartographic, result?: Point3d): Point3d;
-}
+/** @packageDocumentation
+ * @module iModels
+ */
+import { BeEvent, GuidString, Id64String, OpenMode } from "@itwin/core-bentley";
+import { Angle, Point3d, Range3dProps, Transform, Vector3d, XYAndZ, XYZProps, YawPitchRollAngles, YawPitchRollProps } from "@itwin/core-geometry";
+import { ChangesetIdWithIndex } from "./ChangesetProps";
+import { Cartographic, CartographicProps } from "./geometry/Cartographic";
+import { GeographicCRS, GeographicCRSProps } from "./geometry/CoordinateReferenceSystem";
+import { AxisAlignedBox3d } from "./geometry/Placement";
+import { ThumbnailProps } from "./Thumbnail";
+/** The properties to open a connection to an iModel for RPC operations.
+ * @public
+ */
+export interface IModelRpcOpenProps {
+    /** The iTwin in which the iModel exists - must be defined for briefcases that are synchronized with iModelHub. */
+    readonly iTwinId?: GuidString;
+    /** Guid of the iModel. */
+    readonly iModelId?: GuidString;
+    /** Id of the last Changeset that was applied to the iModel - must be defined for briefcases that are synchronized with iModelHub.
+     * @note Changeset Ids are string hash values based on the content and parent.
+     */
+    readonly changeset?: ChangesetIdWithIndex;
+}
+/** The properties that identify an opened iModel for RPC operations.
+ * @public
+ */
+export interface IModelRpcProps extends IModelRpcOpenProps {
+    /** Unique key used for identifying the iModel between the frontend and the backend */
+    readonly key: string;
+}
+/** Properties that position an iModel on the earth via [ECEF](https://en.wikipedia.org/wiki/ECEF) (Earth Centered Earth Fixed) coordinates
+ * The origin is specified as an ECEF coordinate. The cartographicOrigin property contains the latitude, longitude and elevation above the WGS84 ellipsoid
+ * of the origin property. This cartographicOrigin is offered as a convenient pre-calculated value representing the location of the ECEF origin.
+ * The 3D coordinate system this class represents is positioned at specified origin and the axis positioned according to
+ * the other properties.
+ * If the xVector and yVector properties are defined then they take precedence over the YawPitchRoll orientation property. The xVector and yVector
+ * represent the direction and scale of the X and Y axes. The Z axis is always perpendicular (according to the right hand rule) to these X-Y axes.
+ * The scaling in the Z direction is always unity. The scale of the X and Y axes is represented by the size of the vector length.
+ * If the xVector and yVector are not present then the YawPitchRoll properties indicates the angles for all tree axes. Scaling in that case
+ * is unity in all three directions.
+ * Note that the present class is intended to represent geolocated 3D coordinate systems that are normally tangent to the WGS84 ellipsoid
+ * possibly offset in altitude by the terrain elevation above the ellipsoid but other general 3D coordinate systems
+ * can be defined.
+ * @public
+ * @extensions
+ */
+export interface EcefLocationProps {
+    /** The Origin of an iModel on the earth in ECEF coordinates */
+    readonly origin: XYZProps;
+    /** The [orientation](https://en.wikipedia.org/wiki/Geographic_coordinate_conversion) of an iModel on the earth. */
+    readonly orientation: YawPitchRollProps;
+    /** Optional position on the earth used to establish the ECEF coordinates. */
+    readonly cartographicOrigin?: CartographicProps;
+    /** Optional X column vector used with [[yVector]] to calculate potentially non-rigid transform if a projection is present. */
+    readonly xVector?: XYZProps;
+    /** Optional Y column vector used with [[xVector]] to calculate potentially non-rigid transform if a projection is present. */
+    readonly yVector?: XYZProps;
+}
+/** Properties of the [Root Subject]($docs/bis/guide/references/glossary#subject-root).
+ * @public
+ * @extensions
+ */
+export interface RootSubjectProps {
+    /** The name of the root subject. */
+    readonly name: string;
+    /** Description of the root subject (optional). */
+    readonly description?: string;
+}
+/** Properties of an iModel that are always held in memory whenever one is opened, both on the frontend and on the backend .
+ * @public
+ */
+export interface IModelProps {
+    /** The name and description of the root subject of this iModel */
+    readonly rootSubject: RootSubjectProps;
+    /** The volume of the entire project, in spatial coordinates */
+    readonly projectExtents?: Range3dProps;
+    /** An offset to be applied to all spatial coordinates. This is normally used to transform spatial coordinates into the Cartesian coordinate system of a Geographic Coordinate System. */
+    readonly globalOrigin?: XYZProps;
+    /** The location of the iModel in Earth Centered Earth Fixed coordinates. iModel units are always meters */
+    readonly ecefLocation?: EcefLocationProps;
+    /** The Geographic Coordinate Reference System indicating the projection and datum used. */
+    readonly geographicCoordinateSystem?: GeographicCRSProps;
+    /** The name of the iModel. */
+    readonly name?: string;
+}
+/** The properties returned by the backend when creating a new [[IModelConnection]] from the frontend, either with Rpc or with Ipc.
+ * These properties describe the iModel held on the backend for thew newly formed connection and are used to construct a new
+ * [[IModelConnection]] instance on the frontend to access it.
+ * @public
+ */
+export declare type IModelConnectionProps = IModelProps & IModelRpcProps;
+/** The properties that can be supplied when creating a *new* iModel.
+ * @public
+ */
+export interface CreateIModelProps extends IModelProps {
+    /** The GUID of new iModel. If not present, a GUID will be generated. */
+    readonly guid?: GuidString;
+    /** Client name for new iModel */
+    readonly client?: string;
+    /** Thumbnail for new iModel
+     * @alpha
+     */
+    readonly thumbnail?: ThumbnailProps;
+}
+/**
+ * Encryption-related properties that can be supplied when creating or opening snapshot iModels.
+ * NOTE: Encrypted iModels are no longer supported since they require licensed code.
+ * @public
+ * @deprecated
+ */
+export interface IModelEncryptionProps {
+    /** The password used to encrypt/decrypt the snapshot iModel. */
+    readonly password?: string;
+}
+/**
+ * A key used to identify an opened [IModelDb]($backend) between the frontend and backend for Rpc and Ipc communications.
+ * Keys must be unique - that is there can never be two IModelDbs opened with the same key at any given time.
+ * If no key is supplied in a call to open an IModelDb, one is generated and returned.
+ * It is only necessary to supply a key if you have some reason to assign a specific value to identify an IModelDb.
+ * If you don't supply the key, you must use the returned value for Rpc and Ipc communications.
+ * @public
+ */
+export interface OpenDbKey {
+    readonly key?: string;
+}
+/** @beta TODO documentation */
+export interface CloudContainerUri {
+    readonly uriParams: string;
+}
+/** Options to open a [SnapshotDb]($backend).
+ * @public
+ */
+export interface SnapshotOpenOptions extends IModelEncryptionProps, OpenDbKey {
+    /**
+     * The "base" name that can be used for creating temporary files related to this Db.
+     * The string should be a name related to the current Db filename using some known pattern so that all files named "baseName*" can be deleted externally during cleanup.
+     * It must be the name of a file (that may or may not exist) in a writable directory.
+     * If not present, the baseName will default to the database's file name (including the path).
+     * @internal
+     */
+    readonly tempFileBase?: string;
+}
+/** Options to open a [StandaloneDb]($backend) via [StandaloneDb.openFile]($backend) from the backend,
+ * or [BriefcaseConnection.openStandalone]($frontend) from the frontend.
+ * @public
+ */
+export declare type StandaloneOpenOptions = OpenDbKey;
+/** Options that can be supplied when creating snapshot iModels.
+ * @public
+ */
+export interface CreateSnapshotIModelProps extends IModelEncryptionProps {
+    /** If true, then create SQLite views for Model, Element, ElementAspect, and Relationship classes.
+     * These database views can often be useful for interoperability workflows.
+     */
+    readonly createClassViews?: boolean;
+}
+/** The options that can be specified when creating an *empty* snapshot iModel.
+ * @see [SnapshotDb.createEmpty]($backend)
+ * @public
+ */
+export declare type CreateEmptySnapshotIModelProps = CreateIModelProps & CreateSnapshotIModelProps;
+/** Options that can be supplied when creating standalone iModels.
+ * @internal
+ */
+export interface CreateStandaloneIModelProps extends IModelEncryptionProps {
+    /** If present, file will allow local editing, but cannot be used to create changesets */
+    readonly allowEdit?: string;
+}
+/** The options that can be specified when creating an *empty* standalone iModel.
+ * @see [standalone.createEmpty]($backend)
+ * @internal
+ */
+export declare type CreateEmptyStandaloneIModelProps = CreateIModelProps & CreateStandaloneIModelProps;
+/**
+ * @public
+ * @extensions
+ */
+export interface FilePropertyProps {
+    readonly namespace: string;
+    readonly name: string;
+    id?: number | string;
+    subId?: number | string;
+}
+/** The position and orientation of an iModel on the earth in [ECEF](https://en.wikipedia.org/wiki/ECEF) (Earth Centered Earth Fixed) coordinates
+ * @note This is an immutable type - all of its properties are frozen.
+ * @see [GeoLocation of iModels]($docs/learning/GeoLocation.md)
+ * @public
+ */
+export declare class EcefLocation implements EcefLocationProps {
+    /** The origin of the ECEF transform. */
+    readonly origin: Point3d;
+    /** The orientation of the ECEF transform */
+    readonly orientation: YawPitchRollAngles;
+    /** Optional position on the earth used to establish the ECEF origin and orientation. */
+    readonly cartographicOrigin?: Cartographic;
+    /** Optional X column vector used with [[yVector]] to calculate potentially non-rigid transform if a projection is present. */
+    readonly xVector?: Vector3d;
+    /** Optional Y column vector used with [[xVector]] to calculate potentially non-rigid transform if a projection is present. */
+    readonly yVector?: Vector3d;
+    private readonly _transform;
+    /** Get the transform from iModel Spatial coordinates to ECEF from this EcefLocation */
+    getTransform(): Transform;
+    /** Construct a new EcefLocation. Once constructed, it is frozen and cannot be modified. */
+    constructor(props: EcefLocationProps);
+    /** Construct ECEF Location from cartographic origin with optional known point and angle.   */
+    static createFromCartographicOrigin(origin: Cartographic, point?: Point3d, angle?: Angle): EcefLocation;
+    /** Get the location center of the earth in the iModel coordinate system. */
+    get earthCenter(): Point3d;
+    /** Return true if this location is equivalent to another location within a small tolerance. */
+    isAlmostEqual(other: EcefLocation): boolean;
+    toJSON(): EcefLocationProps;
+}
+/** Represents an iModel in JavaScript.
+ * @see [GeoLocation of iModels]($docs/learning/GeoLocation.md)
+ * @public
+ */
+export declare abstract class IModel implements IModelProps {
+    private _projectExtents?;
+    private _name?;
+    private _rootSubject?;
+    private _globalOrigin?;
+    private _ecefLocation?;
+    private _geographicCoordinateSystem?;
+    private _iModelId?;
+    /** The Id of the repository model. */
+    static readonly repositoryModelId: Id64String;
+    /** The Id of the root subject element. */
+    static readonly rootSubjectId: Id64String;
+    /** The Id of the dictionary model. */
+    static readonly dictionaryId: Id64String;
+    /** Event raised after [[name]] changes. */
+    readonly onNameChanged: BeEvent<(previousName: string) => void>;
+    /** Event raised after [[rootSubject]] changes. */
+    readonly onRootSubjectChanged: BeEvent<(previousSubject: RootSubjectProps) => void>;
+    /** Event raised after [[projectExtents]] changes. */
+    readonly onProjectExtentsChanged: BeEvent<(previousExtents: AxisAlignedBox3d) => void>;
+    /** Event raised after [[globalOrigin]] changes. */
+    readonly onGlobalOriginChanged: BeEvent<(previousOrigin: Point3d) => void>;
+    /** Event raised after [[ecefLocation]] changes. */
+    readonly onEcefLocationChanged: BeEvent<(previousLocation: EcefLocation | undefined) => void>;
+    /** Event raised after [[geographicCoordinateSystem]] changes. */
+    readonly onGeographicCoordinateSystemChanged: BeEvent<(previousGCS: GeographicCRS | undefined) => void>;
+    /** Name of the iModel */
+    get name(): string;
+    set name(name: string);
+    /** The name and description of the root subject of this iModel */
+    get rootSubject(): RootSubjectProps;
+    set rootSubject(subject: RootSubjectProps);
+    /** Returns `true` if this is a snapshot iModel. */
+    abstract get isSnapshot(): boolean;
+    /** Returns `true` if this is a briefcase copy of an iModel that is synchronized with iModelHub. */
+    abstract get isBriefcase(): boolean;
+    abstract get isOpen(): boolean;
+    /**
+     * The volume, in spatial coordinates, inside which the entire project is contained.
+     * @note The object returned from this method is frozen. You *must* make a copy before you do anything that might attempt to modify it.
+     */
+    get projectExtents(): AxisAlignedBox3d;
+    set projectExtents(extents: AxisAlignedBox3d);
+    /** An offset to be applied to all spatial coordinates. */
+    get globalOrigin(): Point3d;
+    set globalOrigin(org: Point3d);
+    /** The [EcefLocation]($docs/learning/glossary#ecefLocation) of the iModel in Earth Centered Earth Fixed coordinates.
+     * If the iModel property geographicCoordinateSystem is not defined then the ecefLocation provides a geolocation by defining a
+     * 3D coordinate system relative to the Earth model WGS84. Refer to additional documentation for details. If the geographicCoordinateSystem
+     * property is defined then the ecefLocation must be used with care. When the geographicCoordinateSystem is defined it indicates the
+     * iModel cartesian space is the result of a cartographic projection. This implies a flattening of the Earth surface process that
+     * results in scale, angular or area distortion. The ecefLocation is then an approximation calculated at the center of the project extent.
+     * If the project is more than 2 kilometer in size, the ecefLocation may represent a poor approximation of the effective
+     * cartographic projection used and a linear transformation should then be calculated at the exact origin of the data
+     * it must position.
+     * @see [GeoLocation of iModels]($docs/learning/GeoLocation.md)
+    */
+    get ecefLocation(): EcefLocation | undefined;
+    set ecefLocation(ecefLocation: EcefLocation | undefined);
+    /** Set the [EcefLocation]($docs/learning/glossary#ecefLocation) for this iModel. */
+    setEcefLocation(ecef: EcefLocationProps): void;
+    /** The geographic coordinate reference system of the iModel. */
+    get geographicCoordinateSystem(): GeographicCRS | undefined;
+    set geographicCoordinateSystem(geoCRS: GeographicCRS | undefined);
+    /** Sets the geographic coordinate reference system from GeographicCRSProps. */
+    setGeographicCoordinateSystem(geoCRS: GeographicCRSProps): void;
+    /** @internal */
+    getConnectionProps(): IModelConnectionProps;
+    /** @internal */
+    toJSON(): IModelConnectionProps;
+    /** A key used to identify this iModel in RPC calls from frontend to backend.
+     * @internal
+     */
+    protected _fileKey: string;
+    /** Get the key that was used to open this iModel. This is the value used for Rpc and Ipc communications. */
+    get key(): string;
+    /** @internal */
+    protected _iTwinId?: GuidString;
+    /** The Guid that identifies the iTwin that owns this iModel. */
+    get iTwinId(): GuidString | undefined;
+    /** The Guid that identifies this iModel. */
+    get iModelId(): GuidString | undefined;
+    /** @public */
+    changeset: ChangesetIdWithIndex;
+    protected _openMode: OpenMode;
+    /** The [[OpenMode]] used for this IModel. */
+    get openMode(): OpenMode;
+    /** Return a token for RPC operations.
+     * @throws IModelError if the iModel is not open.
+     */
+    getRpcProps(): IModelRpcProps;
+    /** Returns the iModel's RPC properties.
+     * @note It is an error to attempt to use these properties as a token for RPC operations if the iModel is not open.
+     * @internal
+     */
+    protected _getRpcProps(): IModelRpcProps;
+    /** @internal */
+    protected constructor(tokenProps?: IModelRpcProps);
+    /** @internal */
+    protected initialize(name: string, props: IModelProps): void;
+    /** Get the default subCategoryId for the supplied categoryId */
+    static getDefaultSubCategoryId(categoryId: Id64String): Id64String;
+    /** True if this iModel has an [EcefLocation]($docs/learning/glossary#ecefLocation). */
+    get isGeoLocated(): boolean;
+    /** Get the Transform from this iModel's Spatial coordinates to ECEF coordinates using its [[IModel.ecefLocation]].
+     * @throws IModelError if [[isGeoLocated]] is false.
+     */
+    getEcefTransform(): Transform;
+    /** Convert a point in this iModel's Spatial coordinates to an ECEF point using its [[IModel.ecefLocation]].
+     * @param spatial A point in the iModel's spatial coordinates
+     * @param result If defined, use this for output
+     * @returns A Point3d in ECEF coordinates
+     * @throws IModelError if [[isGeoLocated]] is false.
+     */
+    spatialToEcef(spatial: XYAndZ, result?: Point3d): Point3d;
+    /** Convert a point in ECEF coordinates to a point in this iModel's Spatial coordinates using its [[ecefLocation]].
+     * @param ecef A point in ECEF coordinates
+     * @param result If defined, use this for output
+     * @returns A Point3d in this iModel's spatial coordinates
+     * @throws IModelError if [[isGeoLocated]] is false.
+     * @note The resultant point will only be meaningful if the ECEF coordinate is close on the earth to the iModel.
+     */
+    ecefToSpatial(ecef: XYAndZ, result?: Point3d): Point3d;
+    /** Convert a point in this iModel's Spatial coordinates to a [[Cartographic]] using its [[IModel.ecefLocation]].
+     * @param spatial A point in the iModel's spatial coordinates
+     * @param result If defined, use this for output
+     * @returns A Cartographic location
+     * @throws IModelError if [[isGeoLocated]] is false.
+     */
+    spatialToCartographicFromEcef(spatial: XYAndZ, result?: Cartographic): Cartographic;
+    /** Convert a [[Cartographic]] to a point in this iModel's Spatial coordinates using its [[IModel.ecefLocation]].
+     * @param cartographic A cartographic location
+     * @param result If defined, use this for output
+     * @returns A point in this iModel's spatial coordinates
+     * @throws IModelError if [[isGeoLocated]] is false.
+     * @note The resultant point will only be meaningful if the ECEF coordinate is close on the earth to the iModel.
+     */
+    cartographicToSpatialFromEcef(cartographic: Cartographic, result?: Point3d): Point3d;
+}
 //# sourceMappingURL=IModel.d.ts.map