@isentinel/eslint-config 6.2.0 → 6.4.0

package/README.md

@@ -349,11 +349,13 @@ engines would run (default mode or `--fix`), the runner checks whether the
 resolved config is hybrid; if it is not, it **runs ESLint only, skips oxlint,
 and prints one stderr warning** (enable hybrid mode, or pass `--oxlint` to run
 oxlint explicitly). The check is cheap: the factory records the hybrid status in
-`node_modules/.cache/isentinel-lint/` on every config evaluation, and the runner
-trusts that cache unless your ESLint config is newer, in which case it probes
-`eslint --print-config` once and caches the result. If the status cannot be
-determined it fails open and runs both engines as before. Explicit `--eslint` /
-`--oxlint` runs skip the check entirely.
+`node_modules/.cache/isentinel-lint/` whenever the runner's ESLint children
+evaluate the config (other evaluations, such as tests or scripts that build a
+different config, do not write it), and the runner trusts that cache unless your
+ESLint config is newer, in which case it probes `eslint --print-config` once and
+caches the result. If the status cannot be determined it fails open and runs
+both engines as before. Explicit `--eslint` / `--oxlint` runs skip the check
+entirely.
 
 Any trailing positional arguments are treated as paths to lint (default `.`).
 
@@ -990,19 +992,21 @@ as in the factories, so oxfmt formats the same files the linter would. TOML,
 `.mdx` and other files the linter does not format are ignored.
 
 In standalone mode, oxfmt never sees the linter's options. The factories warn
-once per lint run when you set any of these, because they do not change
-formatting: `formatters` (any value except `true`), `componentExts`, `ignores`,
-or `gitignore` (`false` or custom files). Set the equivalent in `isentinelOxfmt`
-instead (`formatters`, `componentExts`, `ignorePatterns`, and format options).
+once per lint run when you set any of these, because they do not change what
+oxfmt formats: `formatters` (any value except `true`), `componentExts`,
+`ignores`, or `gitignore` (`false` or custom files). They change only which
+Markdown code blocks ESLint formats: `formatters` chooses their languages, and
+the ignores choose their files. Set the equivalent in `isentinelOxfmt` instead
+(`formatters`, `componentExts`, `ignorePatterns`, and format options).
 `stylistic: false` turns off the stylistic lint rules but not oxfmt. The rule
 widths also come from the oxfmt config only, not from
 `formatters.prettierOptions` or `formatters.oxfmtOptions`. The setup wizard
 copies migrated `.eslintignore` patterns to both configs.
 
-With `formatter: "standalone"`, the linter enables `oxfmt/oxfmt` nowhere but
-keeps the rules that turn off formatting conflicts. Lua formatting (Stylua)
-stays in ESLint, because oxfmt does not format Lua. The setup wizard can write
-all of this for you.
+With `formatter: "standalone"`, the linter enables `oxfmt/oxfmt` only in
+Markdown code blocks (see below), but keeps the rules that turn off formatting
+conflicts. Lua formatting (Stylua) stays in ESLint, because oxfmt does not
+format Lua. The setup wizard can write all of this for you.
 
 `isentinel-lint` runs `oxfmt --check` next to the linters whenever it finds an
 `oxfmt.config.ts` or `oxfmt.config.mts`, and `oxfmt --write` last with `--fix`.
@@ -1031,12 +1035,18 @@ becomes implicit only if it fits. It comes from `stylistic.maxLen`, else
 `useOxfmt.printWidth` is the width the rule gives oxfmt to predict its output.
 It always comes from the root `printWidth` of the oxfmt config, so that `--fix`
 agrees with oxfmt. An override that changes `printWidth` or `tabWidth` for JS or
-TS files gets a warning, because the linter uses the root values. In Markdown
-code blocks, `useOxfmt` uses the Markdown widths instead, because oxfmt formats
-embedded code with the Markdown options. Each oxfmt, `.editorconfig` or
-`.prettierrc` override that changes the Markdown widths reaches only the code
-blocks of the files it matches. The comment length rules take their `tabSize`
-from the same oxfmt widths.
+TS files gets a warning, because the linter uses the root values. The comment
+length rules take their `tabSize` from the same oxfmt widths.
+
+Markdown prose and Markdown code blocks are formatted separately, in both modes.
+Oxfmt formats the prose at the Markdown width (`jsdocPrintWidth`, else 80) and
+leaves code blocks alone (`embeddedLanguageFormatting: "off"`). ESLint formats
+each code block with `oxfmt/oxfmt` and the options of its language, the same as
+a file of that language: a TypeScript block uses the root `printWidth`, a YAML
+block the YAML options. Overrides and `.editorconfig` sections, which match by
+path, do not reach code blocks; the config's `ignorePatterns` do. The lint rules
+in a code block use the same widths as in a source file. ESLint does not format
+code blocks in files it ignores.
 
 The stylistic `indent` and `quotes`, and the JSON bracket spacing, follow the
 oxfmt options (`useTabs`, `tabWidth`, `singleQuote`, `bracketSpacing`) unless

package/dist/cli.mjs

@@ -83,7 +83,7 @@ function oxfmtConfigNamesIn(directory) {
 }
 //#endregion
 //#region package.json
-var version = "6.2.0";
+var version = "6.4.0";
 var package_default = {
 	name: "@isentinel/eslint-config",
 	version,
@@ -145,7 +145,7 @@ var package_default = {
 		"dev": "npx @eslint/config-inspector --config eslint-inspector.config.ts",
 		"gen": "node scripts/typegen.ts && node scripts/typegen-oxlint.ts && node scripts/typegen-defaults.ts && node scripts/typegen-defaults-oxlint.ts && node scripts/versiongen.ts && node scripts/stylistic-gen.ts && node scripts/type-aware-gen.ts && node scripts/roblox-allowed-words-gen.ts && node scripts/gen-package-extensions.ts",
 		"postgen": "echo 'Generation complete!'",
-		"lint": "isentinel-lint",
+		"lint": "isentinel-lint --eslint-args \"--max-warnings 0\" --oxlint-args --deny-warnings",
 		"oxlint": "oxlint",
 		"prepack": "nr build",
 		"release": "bumpp -r",
@@ -264,8 +264,8 @@ var package_default = {
 		"eslint-plugin-react-naming-convention": "^5.10.0",
 		"eslint-plugin-react-x": "^5.10.0",
 		"eslint-plugin-testing-library": "^7.16.2",
-		"oxlint": ">=1.73.0",
-		"oxlint-tsgolint": ">=0.24.0"
+		"oxlint": ">=1.92.0",
+		"oxlint-tsgolint": ">=7.0.2005"
 	},
 	peerDependenciesMeta: {
 		"@vitest/eslint-plugin": { "optional": true },
@@ -281,8 +281,8 @@ var package_default = {
 		"oxlint": { "optional": true },
 		"oxlint-tsgolint": { "optional": true }
 	},
-	packageManager: "pnpm@11.17.0+sha512.cca3cea332ad254bb84145f966d19f4879615210346fc92c79a047f23a0d7b3cca3c3792f0076ba1f1831d277efbcf0a9119b31a9a60eca7fb3d6231f331ef72",
-	engines: { "node": ">=24.12.0" },
+	packageManager: "pnpm@12.18.0+sha512.9d7882d5dc82147ecfc4e062aa34834e0ad0296710a1837a1115ae012127d36b7109e321ac1598a1dd0a65597681b1e99917e12ed0d749eae91187943363beb3",
+	engines: { "node": ">=24.15.0" },
 	publishConfig: { "access": "public" }
 };
 //#endregion