@intentius/chant 0.124.13 → 0.124.14

package/dist/components/pr-run.js

@@ -0,0 +1,363 @@
+/**
+ * Plan and apply a pull request's members (#3183).
+ *
+ * `../pr-loop.ts` says what the gate binds and what the report holds; this
+ * produces them. Both stages call {@link planPrSet}: the plan stage to show
+ * the plan and its digest, the apply stage to plan the same members again
+ * before anything applies and decide the gate against what it gets. Planning
+ * everything before applying anything is what makes the two digests
+ * comparable: each member is planned against the same state both times.
+ *
+ * ## Dependents read the outputs standing now
+ *
+ * A member that reads another one's output through `stackOutput()` is
+ * planned with the value that output has now, read through the capability's
+ * `outputs` (`readComponentOutputs`). When the change moves that output, the
+ * dependent's approved plan still carries the old value; the apply applies
+ * it as approved and marks the member `inputsMoved`, and the next run plans
+ * it against the new value. A change that must carry a moved output through
+ * its dependents in one rollout is what gated waves are for (#3049): each
+ * wave is planned after the one before it applied.
+ *
+ * ## Finishing an apply that failed partway
+ *
+ * {@link resumePrSet} (#3464) is fan-out's resume (#2417, #3049) for a pull
+ * request. The attempt record (`./fan-out-record.ts`) keeps the change set
+ * the gate approved and the components that applied. A re-run on the same
+ * commit narrows the derivation to what is left (`remainingFanOut`), plans
+ * only that against the outputs the approved plans read, and checks each
+ * member it plans against the approved set. When every one is covered, the
+ * gate is decided against the approved digest, which still stands, and only
+ * the rest applies. Planning everything again would give the applied members
+ * empty plans and the set a new digest, and so ask for a second approval of
+ * work already approved.
+ */
+import { composeChangeSet, verifyChangeSetDigest } from "../change-set.js";
+import { evaluateGate } from "../op/gate.js";
+import { memberCounts, PR_REPORT_CONTRACT, PR_REPORT_SCHEMA_ID, } from "../pr-loop.js";
+import { deployContext } from "./driver.js";
+import { deployUnits } from "./deploy-units.js";
+import { runFanOut } from "./fan-out-run.js";
+import { remainingFanOut } from "./fan-out.js";
+import { planWaveComponent, readComponentOutputs } from "./wave-plan.js";
+/** A failed component's members: the units its steps target, else the component itself. */
+function failedParts(component, error) {
+    const units = deployUnits(component.deploy).map((u) => u.unit);
+    return (units.length > 0 ? units : [component.name]).map((member) => ({
+        member: { member, lexicon: "chant", planner: "chant", status: "failed", error, planDigest: null, holes: [] },
+        entries: [],
+    }));
+}
+/**
+ * Plan every component in `plan.order`, a wave at a time, each against the
+ * outputs its dependencies have now. Never throws for a component that fails
+ * to plan: it becomes a failed member, and `failed` is set.
+ */
+export async function planPrSet(options) {
+    const byName = new Map(options.components.map((c) => [c.name, c]));
+    const outputs = { ...(options.seededOutputs ?? {}) };
+    const read = new Set(Object.keys(outputs));
+    const parts = [];
+    const componentOf = new Map();
+    const plans = {};
+    let failed = false;
+    for (const wave of options.plan.waves) {
+        // The dependencies' outputs first, each read once. A dependency that
+        // cannot say leaves its references unresolved, which its dependent's
+        // plan reports if it needs them.
+        for (const name of wave) {
+            for (const dep of byName.get(name)?.dependsOn ?? []) {
+                if (read.has(dep) || !byName.has(dep))
+                    continue;
+                read.add(dep);
+                const found = await readComponentOutputs(byName.get(dep), options.registry, deployContext(options, dep), outputs);
+                if (found)
+                    outputs[dep] = found;
+            }
+        }
+        const planned = await Promise.all(wave.map((name) => planWaveComponent(byName.get(name), options.registry, deployContext(options, name), outputs)));
+        for (const p of planned) {
+            const component = byName.get(p.component);
+            if ("error" in p) {
+                failed = true;
+                for (const part of failedParts(component, p.error)) {
+                    parts.push(part);
+                    componentOf.set(part.member.member, p.component);
+                }
+                continue;
+            }
+            plans[p.component] = p.plans;
+            for (const part of p.parts) {
+                parts.push(part);
+                componentOf.set(part.member.member, p.component);
+            }
+        }
+    }
+    const doc = composeChangeSet(parts);
+    const members = doc.members.map((m) => ({
+        member: m.member,
+        component: componentOf.get(m.member) ?? m.member,
+        planDigest: m.planDigest,
+        status: m.status === "failed" ? "plan-failed" : "planned",
+        counts: memberCounts(doc, m.member),
+        ...(m.error ? { error: m.error } : {}),
+    }));
+    return { doc, members, plans, outputs, failed };
+}
+/**
+ * A ledger that reads the real one and records nothing. The plan stage
+ * decides the gate only to say where the approval stands; it runs the pull
+ * request's own code and holds no write access to `chant/lifecycle`.
+ */
+export function readOnlyLedger(port) {
+    return {
+        read: (op) => port.read(op),
+        ...(port.approvalRule ? { approvalRule: (gate, at) => port.approvalRule(gate, at) } : {}),
+        async appendPending(input) {
+            return { record: { version: 1, kind: "pending", ...input }, pushed: false, pushWarning: "not recorded: the plan stage writes nothing" };
+        },
+    };
+}
+/** Where the approval stands, as the report says it. */
+export function approvalOf(check) {
+    if (check.satisfied) {
+        const by = check.approvals?.length ? check.approvals.map((r) => r.resolvedBy) : [check.resolution.resolvedBy];
+        return { status: "approved", approvedBy: [...new Set(by)] };
+    }
+    if (check.mismatch)
+        return { status: "changed", ...(check.mismatch.approved ? { approved: check.mismatch.approved } : {}) };
+    return { status: "pending" };
+}
+/** Decide the pull request's gate against `digest`. */
+export async function decidePrGate(port, input) {
+    return evaluateGate(port, {
+        op: input.op,
+        gate: input.gate,
+        planDigest: input.digest,
+        ...(input.description ? { description: input.description } : {}),
+        ...(input.now ? { now: input.now } : {}),
+    });
+}
+/**
+ * Who approved the gate but has no standing approving review on the pull
+ * request. Each approval's `resolvedBy` is compared with the forge's own
+ * naming of each approver (#3163's form).
+ */
+export function approversWithoutReview(approvedBy, reviewers) {
+    const norm = (s) => s.trim().toLowerCase();
+    const allowed = new Set(reviewers.map(norm));
+    return approvedBy.filter((by) => !allowed.has(norm(by)));
+}
+const sameJson = (a, b) => JSON.stringify(a ?? null) === JSON.stringify(b ?? null);
+/**
+ * Apply the approved plans in dependency order. A failed component blocks
+ * its dependents and nothing else (`runFanOut`).
+ */
+export async function applyPrSet(options) {
+    const before = options.set.outputs;
+    const run = await runFanOut(options.plan, options.components, options.registry, {
+        env: options.env,
+        ...(options.vars ? { vars: options.vars } : {}),
+        plans: options.set.plans,
+        componentOutputs: { ...before },
+        ...(options.onProgress ? { onProgress: options.onProgress } : {}),
+        ...(options.onComponentSettled ? { onComponentSettled: options.onComponentSettled } : {}),
+    });
+    const completed = new Set(run.completed);
+    const priorCompleted = new Set(options.resumed?.completed ?? []);
+    /**
+     * Whether a dependency's outputs moved from what the plans read: by this
+     * run's apply, or by the earlier attempt's when the record kept them.
+     */
+    const movedBy = (dep) => {
+        if (completed.has(dep))
+            return !sameJson(before[dep], run.componentOutputs[dep]);
+        const earlier = options.resumed?.outputs;
+        return priorCompleted.has(dep) && earlier !== undefined && dep in earlier && !sameJson(before[dep], earlier[dep]);
+    };
+    const blocked = new Set(run.blocked.map((b) => b.component));
+    const errorOf = (component) => {
+        const result = run.results.find((r) => r.component === component);
+        if (result?.status === "gated")
+            return `stopped at its own gate ${result.gate?.gate ?? ""}`.trim();
+        return result?.records.find((r) => r.status === "fail")?.error;
+    };
+    const byName = new Map(options.components.map((c) => [c.name, c]));
+    const members = options.set.members.map((m) => {
+        if (priorCompleted.has(m.component))
+            return { ...m, status: "applied" };
+        if (completed.has(m.component)) {
+            const moved = (byName.get(m.component)?.dependsOn ?? [])
+                .filter(movedBy)
+                .sort();
+            return { ...m, status: "applied", ...(moved.length > 0 ? { inputsMoved: moved } : {}) };
+        }
+        if (blocked.has(m.component))
+            return { ...m, status: "blocked" };
+        const error = errorOf(m.component);
+        return { ...m, status: "failed", ...(error ? { error } : {}) };
+    });
+    return { members, status: run.status === "ok" ? "applied" : "failed", run };
+}
+const entryKey = (e) => `${e.member}\u0000${e.address}\u0000${e.deposed ?? ""}`;
+/**
+ * Why `member`'s fresh plan is not covered by the approved change set, or
+ * `undefined` when it is. A member left over from a partial apply is covered
+ * when it plans to the digest that was approved, or when every change it
+ * plans now is one the approved plan made:
+ *
+ * - an entry at the same address with the same action, or a `create` or a
+ *   `delete` where a `replace` was approved (the other half applied);
+ * - each attribute it writes was written by the approved entry, to the same
+ *   value or to one the approved plan knew only after apply. A sensitive
+ *   attribute carries no value to compare, so it is covered only where the
+ *   approved entry wrote that attribute as sensitive too. On a `create` left
+ *   from a `replace`, an attribute the replace did not change is not compared;
+ * - each side effect is one the approved plan ran.
+ *
+ * A member with holes the approved plan did not have is never covered by its
+ * entries, since its entries may not say everything it will do.
+ */
+export function planCoveredBy(approved, fresh, member) {
+    const was = approved.members.find((m) => m.member === member);
+    const now = fresh.members.find((m) => m.member === member);
+    if (!now)
+        return undefined;
+    if (!was)
+        return `${member} was not in the approved plan`;
+    if (now.status === "failed" || now.planDigest === null)
+        return `${member} failed to plan${now.error ? `: ${now.error}` : ""}`;
+    if (was.planDigest !== null && now.planDigest === was.planDigest)
+        return undefined;
+    if (was.status === "failed")
+        return `${member} had no approved plan`;
+    const knownHoles = new Set(was.holes.map((h) => h.address));
+    const newHole = now.holes.find((h) => !knownHoles.has(h.address));
+    if (newHole)
+        return `${member} cannot read ${newHole.address} (${newHole.reason}), so its plan cannot be checked against the approved one`;
+    const approvedEntries = new Map(approved.entries.filter((e) => e.member === member).map((e) => [entryKey(e), e]));
+    for (const e of fresh.entries) {
+        if (e.member !== member || e.action === "no-op" || e.action === "read")
+            continue;
+        // A create-before-destroy replace whose create applied leaves the old
+        // object deposed, and the plan now deletes it under a deposed key.
+        const a = approvedEntries.get(entryKey(e)) ??
+            (e.action === "delete" && e.deposed ? approvedEntries.get(entryKey({ ...e, deposed: undefined })) : undefined);
+        if (!a)
+            return `${member} now plans to ${e.action} ${e.address}, which the approved plan did not`;
+        const halfReplace = a.action === "replace" && (e.action === "create" || e.action === "delete");
+        if (a.action !== e.action && !halfReplace) {
+            return `${member} now plans to ${e.action} ${e.address}, where the approved plan would ${a.action} it`;
+        }
+        const approvedAttrs = new Map(a.attributes.map((attr) => [attr.path, attr]));
+        for (const attr of e.attributes) {
+            const at = `${e.address}.${attr.path}`;
+            const prior = approvedAttrs.get(attr.path);
+            if (!prior) {
+                if (halfReplace && e.action === "create")
+                    continue;
+                return `${member} now writes ${at}, which the approved plan did not`;
+            }
+            if (attr.sensitive) {
+                if (!prior.sensitive)
+                    return `${member} now writes ${at} as sensitive, so it cannot be compared with the approved value`;
+                continue;
+            }
+            if (prior.sensitive)
+                return `${member} writes ${at}, which the approved plan wrote as sensitive, so it cannot be compared`;
+            if (prior.unknown)
+                continue;
+            if (attr.unknown)
+                return `${member} now writes ${at} with a value known only after apply, where the approved plan knew it`;
+            if (!sameJson(attr.after, prior.after))
+                return `${member} now writes ${at} to a different value than the approved plan`;
+        }
+    }
+    const approvedEffects = new Set((approved.sideEffects ?? []).filter((s) => s.member === member).map((s) => JSON.stringify([s.address, s.type, s.trigger ?? null, s.event ?? null])));
+    for (const s of fresh.sideEffects ?? []) {
+        if (s.member !== member)
+            continue;
+        if (!approvedEffects.has(JSON.stringify([s.address, s.type, s.trigger ?? null, s.event ?? null]))) {
+            return `${member} now runs ${s.address}, which the approved plan did not`;
+        }
+    }
+    return undefined;
+}
+/**
+ * Plan what an apply that failed partway left (#3464): narrow the plan by
+ * the components that applied, plan the rest against the outputs the
+ * approved plans read, and check each member against the approved change
+ * set ({@link planCoveredBy}). Covered, the result is the approved set with
+ * the new plans in it, to decide the gate against `record.digest` and hand
+ * to {@link applyPrSet}. Not covered, it says why, and the caller plans
+ * everything and asks for a fresh approval.
+ *
+ * The record now travels between CI jobs through a cache (#3543), so its
+ * change set has to be the one its digest names: the document's own digest
+ * is `record.digest`, and the document gives that digest. The digest binds
+ * the entries, holes and side effects {@link planCoveredBy} reads (#3555),
+ * so a record cannot widen what a re-planned member may do.
+ */
+export async function resumePrSet(options) {
+    const { record } = options;
+    if (record.changeSet.digest !== record.digest || !verifyChangeSetDigest(record.changeSet)) {
+        return { ok: false, reasons: [`the record's change set is not the one its digest ${record.digest} names`] };
+    }
+    const plan = remainingFanOut(options.plan, options.components, { completed: options.completed });
+    const fresh = await planPrSet({
+        components: options.components,
+        plan,
+        registry: options.registry,
+        env: options.env,
+        ...(options.vars ? { vars: options.vars } : {}),
+        seededOutputs: { ...(options.seededOutputs ?? {}), ...options.record.planOutputs },
+    });
+    const reasons = fresh.doc.members
+        .map((m) => planCoveredBy(options.record.changeSet, fresh.doc, m.member))
+        .filter((r) => r !== undefined);
+    if (reasons.length > 0)
+        return { ok: false, reasons, fresh };
+    return {
+        ok: true,
+        plan,
+        fresh,
+        set: {
+            doc: options.record.changeSet,
+            members: options.record.members.map((m) => ({ ...m, status: "planned" })),
+            plans: fresh.plans,
+            outputs: options.record.planOutputs,
+            failed: false,
+        },
+    };
+}
+/** The report a stage writes. */
+export function prReport(input) {
+    const changed = new Set(input.signal.changed);
+    return {
+        $schema: PR_REPORT_SCHEMA_ID,
+        contract: PR_REPORT_CONTRACT,
+        stage: input.stage,
+        pr: input.pr,
+        env: input.env,
+        ...(input.member ? { member: input.member } : {}),
+        base: input.base,
+        head: input.head,
+        op: input.op,
+        gate: input.gate,
+        digest: input.set.doc.digest,
+        status: input.status,
+        ...(input.refusal ? { refusal: input.refusal } : {}),
+        ...(input.message ? { message: input.message } : {}),
+        ...(input.resumed ? { resumed: { applied: [...input.resumed].sort() } } : {}),
+        approval: input.approval,
+        selection: {
+            changed: input.plan.order.filter((c) => changed.has(c)),
+            dependents: input.plan.order.filter((c) => !changed.has(c)),
+            unclaimed: input.signal.unclaimed,
+            indeterminate: input.plan.indeterminate,
+            waves: input.plan.waves,
+        },
+        members: input.members ?? input.set.members,
+        changeSet: input.set.doc,
+    };
+}

package/dist/components/presets/ecs-fargate.js

@@ -0,0 +1,72 @@
+/**
+ * Preset: `EcsFargateComponent` (#566, epic #551 §"6. Presets (Level 2 reuse)").
+ *
+ * The named-composition builder for the ALB/ECS shape
+ * (`../pilots/alb-ecs.pilot.ts`): `docker-build` -> `publish-image` ->
+ * `cfn-deploy` (importing a shared ALB's cross-stack outputs) ->
+ * `ecs-update-service` -> `wait-steady-state` + `health-gate`.
+ *
+ * There is no component-level `rollback` phase (#2576). The preset used to
+ * declare one holding a `rollback-previous` step with only `service` and
+ * `cluster`. The aws capability behind that kind rolls a service back to the
+ * `taskDefinition` it is given, and with none given it ran `aws ecs
+ * update-service` with no changes, so the phase restored nothing. The
+ * in-run unwind still calls each executed step's own rollback, and taking an
+ * environment back to an earlier recorded release is `chant components
+ * rollback <env> --component <name>` (#2531).
+ *
+ * This is Level 2 reuse over Level 1 raw capabilities: a component that looks
+ * like this composes `EcsFargateComponent({ ... })` directly; the odd case
+ * that needs something extra starts from the same shape and drops to raw
+ * `phase()`/capability `Step`s where it is special (see
+ * docs/components/capabilities.mdx#presets--reuse-without-a-closed-set) —
+ * `./ecs-fargate.test.ts` demonstrates exactly that by re-deriving
+ * `alb-ecs.pilot.ts`'s `searchService` component from this preset and
+ * asserting the two project to the identical JSON contract.
+ */
+import { phase, stackOutput } from "../component.js";
+/**
+ * Expand an ECS/Fargate service behind an ALB to its standard
+ * Publish/Apply/Verify composition — the 80% shape `alb-ecs.pilot.ts` is the
+ * hand-composed reference for. Returns a full `Component`; a caller that
+ * needs one extra step (an additional Apply capability, a different Verify
+ * shape) spreads the result and edits `deploy`/`rollback` directly — the
+ * preset is a starting composition, not a closed strategy object.
+ */
+export function EcsFargateComponent(config) {
+    const service = config.service ?? config.name;
+    const template = config.template ?? `archive:${config.name}.template.json`;
+    const cluster = config.cluster ?? "$env.cluster";
+    const registry = config.registry ?? "$env.registry";
+    const sharedAlbOutputs = config.sharedAlbStack
+        ? {
+            listenerArn: stackOutput(config.sharedAlbStack, "ListenerArn"),
+            clusterArn: stackOutput(config.sharedAlbStack, "ClusterArn"),
+            subnets: stackOutput(config.sharedAlbStack, "Subnets"),
+        }
+        : undefined;
+    const inputs = sharedAlbOutputs || config.extraInputs ? { ...sharedAlbOutputs, ...config.extraInputs } : undefined;
+    const dependsOn = [...(config.sharedAlbStack ? [config.sharedAlbStack] : []), ...(config.dependsOn ?? [])];
+    return {
+        name: config.name,
+        archetype: "service",
+        dependsOn,
+        build: { kind: "docker-build", context: config.context ?? ".", into: "archive" },
+        deploy: [
+            phase("Publish", [{ kind: "publish-image", from: "archive", to: registry }]),
+            phase("Apply", [
+                {
+                    kind: "cfn-deploy",
+                    template,
+                    imageRef: "@Publish.digest",
+                    ...(inputs ? { inputs } : {}),
+                },
+                { kind: "ecs-update-service", cluster, service },
+            ]),
+            phase("Verify", [
+                { kind: "wait-steady-state", service },
+                { kind: "health-gate", path: config.healthPath },
+            ]),
+        ],
+    };
+}

package/dist/components/presets/index.js

@@ -0,0 +1,28 @@
+/**
+ * Preset library (#566, epic #551 §"6. Presets (Level 2 reuse)") — named
+ * composition builders for the common component shapes. Each preset expands
+ * to a full, valid `Component` (../component.ts): the same typed authoring
+ * form and JSON contract every hand-composed component projects to, so a
+ * preset-based component and a hand-composed one are indistinguishable to
+ * `projectToJson`, schema validation, lint, and the driver.
+ *
+ * This is Level 2 reuse over Level 1 raw capabilities
+ * (docs/components/capabilities.mdx#presets--reuse-without-a-closed-set): a
+ * component that matches one of these shapes calls the preset directly; the
+ * odd one that needs something extra spreads the returned `Component` and
+ * edits `deploy`/`rollback` where it is special. Presets remove composition
+ * copy-paste (the COMP007 lint hint) without creating a closed strategy set —
+ * see ./ecs-fargate.test.ts, ./lambda.test.ts, and
+ * ./single-host-compose.test.ts, each of which re-derives an existing
+ * hand-composed pilot/fixture from its preset and asserts the two project to
+ * the identical JSON contract.
+ *
+ * Deliberately not exhaustive: three presets covering the three archetypes'
+ * most common shapes (a load-balanced container service, a container-image
+ * Lambda function, and a registry-less single-host compose deploy), per
+ * #566's explicit scope ("start with the common shapes; an exhaustive
+ * catalog is out of scope").
+ */
+export { EcsFargateComponent } from "./ecs-fargate.js";
+export { LambdaComponent } from "./lambda.js";
+export { SingleHostComposeComponent, } from "./single-host-compose.js";

package/dist/components/presets/lambda.js

@@ -0,0 +1,34 @@
+/**
+ * Preset: `LambdaComponent` (#566, epic #551 §"6. Presets (Level 2 reuse)").
+ *
+ * The named-composition builder for the container-image Lambda shape
+ * (`../pilots/lambda.pilot.ts`): `docker-build` -> `publish-image` ->
+ * `lambda-deploy` -> `health-gate` against the function's alias. Distinct
+ * from `EcsFargateComponent`'s apply family on purpose — no CloudFormation
+ * stack in Apply at all, matching the pilot's documented "first pilot whose
+ * Apply phase contains no cfn-deploy" shape.
+ */
+import { phase } from "../component.js";
+/**
+ * Expand a container-image AWS Lambda function to its standard
+ * Publish/Apply/Verify composition — the reference shape
+ * `lambda.pilot.ts` hand-composes. Reuses `docker-build`/`publish-image`
+ * unchanged from `EcsFargateComponent`'s build axis (build + promote-by-digest
+ * is identical for a container-image Lambda); only the apply/verify shape
+ * differs.
+ */
+export function LambdaComponent(config) {
+    const functionName = config.functionName ?? config.name;
+    const alias = config.alias ?? "live";
+    return {
+        name: config.name,
+        archetype: "service",
+        dependsOn: config.dependsOn ?? [],
+        build: { kind: "docker-build", context: config.context ?? ".", into: "archive" },
+        deploy: [
+            phase("Publish", [{ kind: "publish-image", from: "archive", to: config.registry ?? "$env.registry" }]),
+            phase("Apply", [{ kind: "lambda-deploy", functionName, codeRef: "@Publish.uri", alias }]),
+            phase("Verify", [{ kind: "health-gate", path: "@Apply.functionArn" }]),
+        ],
+    };
+}

package/dist/components/presets/single-host-compose.js

@@ -0,0 +1,41 @@
+/**
+ * Preset: `SingleHostComposeComponent` (#566, epic #551 §"6. Presets (Level 2
+ * reuse)").
+ *
+ * The named-composition builder for the registry-less single-host Docker
+ * Compose shape (`../__fixtures__/single-host-compose.json`): `docker-build`
+ * -> `load-image-on-host` (registry-free promotion, see
+ * ../verbs/publish.ts's `load-image-on-host` docstring) -> `copy-to-host` the
+ * compose file -> `remote-exec` a `docker compose up -d` -> `wait-endpoint`
+ * against the service's health path. This is the N=1 case of the fan-out
+ * shape `neo4j-fanout.pilot.ts` composes by hand at N=3 — single-host compose
+ * and a host fleet are the same composition shape at different N (see
+ * docs/components/composition-and-wiring.mdx#fan-out-is-composition-not-orchestrator-knowledge).
+ */
+import { phase } from "../component.js";
+/**
+ * Expand a single-host Docker Compose deploy to its standard
+ * Publish/Apply/Verify composition. No registry ever in the path: the built
+ * image tarball is copied straight onto the host and `docker load`ed there
+ * (`load-image-on-host`), the compose file follows the same way, and
+ * `docker compose up -d` runs via `remote-exec` — the registry-less backend
+ * axis documented in docs/components/build-archive.mdx.
+ */
+export function SingleHostComposeComponent(config) {
+    const host = config.host ?? "$env.host";
+    const hostComposePath = config.hostComposePath ?? `/opt/${config.name}/compose.yaml`;
+    return {
+        name: config.name,
+        archetype: "service",
+        dependsOn: config.dependsOn ?? [],
+        build: { kind: "docker-build", context: config.context ?? ".", into: "archive" },
+        deploy: [
+            phase("Publish", [{ kind: "load-image-on-host", from: "archive", host }]),
+            phase("Apply", [
+                { kind: "copy-to-host", from: config.composeFile ?? "archive:compose.yaml", to: hostComposePath, host },
+                { kind: "remote-exec", host, command: `docker compose -f ${hostComposePath} up -d` },
+            ]),
+            phase("Verify", [{ kind: "wait-endpoint", host, path: config.healthPath, port: config.healthPort }]),
+        ],
+    };
+}