@in-human-resources/backend-proto 0.1.4 → 0.1.6

package/gen/ts/node_modules/@bufbuild/protobuf/dist/cjs/to-plain-message.js

@@ -0,0 +1,72 @@
+"use strict";
+// Copyright 2021-2024 Buf Technologies, Inc.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.toPlainMessage = void 0;
+const is_message_js_1 = require("./is-message.js");
+/**
+ * toPlainMessage returns a new object by stripping
+ * all methods from a message, leaving only fields and
+ * oneof groups. It is recursive, meaning it applies this
+ * same logic to all nested message fields as well.
+ *
+ * If the argument is already a plain message, it is
+ * returned as-is.
+ */
+function toPlainMessage(message) {
+    if (!(0, is_message_js_1.isMessage)(message)) {
+        return message;
+    }
+    const type = message.getType();
+    const target = {};
+    for (const member of type.fields.byMember()) {
+        const source = message[member.localName];
+        let copy;
+        if (member.repeated) {
+            copy = source.map((e) => toPlainValue(e));
+        }
+        else if (member.kind == "map") {
+            copy = {};
+            for (const [key, v] of Object.entries(source)) {
+                copy[key] = toPlainValue(v);
+            }
+        }
+        else if (member.kind == "oneof") {
+            const f = member.findField(source.case);
+            copy = f
+                ? { case: source.case, value: toPlainValue(source.value) }
+                : { case: undefined };
+        }
+        else {
+            copy = toPlainValue(source);
+        }
+        target[member.localName] = copy;
+    }
+    return target;
+}
+exports.toPlainMessage = toPlainMessage;
+function toPlainValue(value) {
+    if (value === undefined) {
+        return value;
+    }
+    if ((0, is_message_js_1.isMessage)(value)) {
+        return toPlainMessage(value);
+    }
+    if (value instanceof Uint8Array) {
+        const c = new Uint8Array(value.byteLength);
+        c.set(value);
+        return c;
+    }
+    return value;
+}

package/gen/ts/node_modules/@bufbuild/protobuf/dist/cjs/type-registry.d.ts

@@ -0,0 +1,66 @@
+import type { MessageType } from "./message-type.js";
+import type { EnumType } from "./enum.js";
+import type { ServiceType } from "./service-type.js";
+import type { Extension } from "./extension.js";
+/**
+ * IMessageTypeRegistry provides look-up for message types.
+ *
+ * You can conveniently create a registry using the createRegistry()
+ * function:
+ *
+ * ```ts
+ * import { createRegistry } from "@bufbuild/protobuf";
+ * import { MyMessage, MyOtherMessage } from "./gen/my_message_pb.js";
+ *
+ * const reg: IMessageTypeRegistry = createRegistry(
+ *   MyMessage,
+ *   MyOtherMessage,
+ * );
+ * ```
+ */
+export interface IMessageTypeRegistry {
+    /**
+     * Find a message type by its protobuf type name.
+     */
+    findMessage(typeName: string): MessageType | undefined;
+}
+/**
+ * IEnumTypeRegistry provides look-up for enum types.
+ */
+export interface IEnumTypeRegistry {
+    /**
+     * Find an enum type by its protobuf type name.
+     */
+    findEnum(typeName: string): EnumType | undefined;
+}
+/**
+ * IServiceTypeRegistry provides look-up for service types.
+ */
+export interface IServiceTypeRegistry {
+    /**
+     * Find a service type by its protobuf type name.
+     */
+    findService(typeName: string): ServiceType | undefined;
+}
+/**
+ * IExtensionRegistry provides look-up for extensions.
+ */
+export interface IExtensionRegistry {
+    /**
+     * Find an extension by the extendee type name and the extension number.
+     */
+    findExtensionFor(extendee: string, no: number): Extension | undefined;
+    /**
+     * Find an extension type by its protobuf type name.
+     */
+    findExtension(typeName: string): Extension | undefined;
+}
+/**
+ * A registry that allows
+ */
+export interface IMutableRegistry extends IMessageTypeRegistry, IEnumTypeRegistry, IServiceTypeRegistry, IExtensionRegistry {
+    /**
+     * Adds the type to the registry.
+     */
+    add(type: MessageType | EnumType | ServiceType | Extension): void;
+}

package/gen/ts/node_modules/@bufbuild/protobuf/dist/cjs/type-registry.js

@@ -0,0 +1,15 @@
+"use strict";
+// Copyright 2021-2024 Buf Technologies, Inc.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+Object.defineProperty(exports, "__esModule", { value: true });

package/gen/ts/node_modules/@bufbuild/protobuf/dist/esm/binary-encoding.d.ts

@@ -0,0 +1,422 @@
+/**
+ * Protobuf binary format wire types.
+ *
+ * A wire type provides just enough information to find the length of the
+ * following value.
+ *
+ * See https://developers.google.com/protocol-buffers/docs/encoding#structure
+ */
+export declare enum WireType {
+    /**
+     * Used for int32, int64, uint32, uint64, sint32, sint64, bool, enum
+     */
+    Varint = 0,
+    /**
+     * Used for fixed64, sfixed64, double.
+     * Always 8 bytes with little-endian byte order.
+     */
+    Bit64 = 1,
+    /**
+     * Used for string, bytes, embedded messages, packed repeated fields
+     *
+     * Only repeated numeric types (types which use the varint, 32-bit,
+     * or 64-bit wire types) can be packed. In proto3, such fields are
+     * packed by default.
+     */
+    LengthDelimited = 2,
+    /**
+     * Start of a tag-delimited aggregate, such as a proto2 group, or a message
+     * in editions with message_encoding = DELIMITED.
+     */
+    StartGroup = 3,
+    /**
+     * End of a tag-delimited aggregate.
+     */
+    EndGroup = 4,
+    /**
+     * Used for fixed32, sfixed32, float.
+     * Always 4 bytes with little-endian byte order.
+     */
+    Bit32 = 5
+}
+type TextEncoderLike = {
+    encode(input?: string): Uint8Array;
+};
+type TextDecoderLike = {
+    decode(input?: Uint8Array): string;
+};
+export interface IBinaryReader {
+    /**
+     * Current position.
+     */
+    readonly pos: number;
+    /**
+     * Number of bytes available in this reader.
+     */
+    readonly len: number;
+    /**
+     * Reads a tag - field number and wire type.
+     */
+    tag(): [number, WireType];
+    /**
+     * Skip one element on the wire and return the skipped data.
+     */
+    skip(wireType: WireType, fieldNo?: number): Uint8Array;
+    /**
+     * Read a `uint32` field, an unsigned 32 bit varint.
+     */
+    uint32(): number;
+    /**
+     * Read a `int32` field, a signed 32 bit varint.
+     */
+    int32(): number;
+    /**
+     * Read a `sint32` field, a signed, zigzag-encoded 32-bit varint.
+     */
+    sint32(): number;
+    /**
+     * Read a `int64` field, a signed 64-bit varint.
+     */
+    int64(): bigint | string;
+    /**
+     * Read a `sint64` field, a signed, zig-zag-encoded 64-bit varint.
+     */
+    sint64(): bigint | string;
+    /**
+     * Read a `fixed64` field, a signed, fixed-length 64-bit integer.
+     */
+    sfixed64(): bigint | string;
+    /**
+     * Read a `uint64` field, an unsigned 64-bit varint.
+     */
+    uint64(): bigint | string;
+    /**
+     * Read a `fixed64` field, an unsigned, fixed-length 64 bit integer.
+     */
+    fixed64(): bigint | string;
+    /**
+     * Read a `bool` field, a variant.
+     */
+    bool(): boolean;
+    /**
+     * Read a `fixed32` field, an unsigned, fixed-length 32-bit integer.
+     */
+    fixed32(): number;
+    /**
+     * Read a `sfixed32` field, a signed, fixed-length 32-bit integer.
+     */
+    sfixed32(): number;
+    /**
+     * Read a `float` field, 32-bit floating point number.
+     */
+    float(): number;
+    /**
+     * Read a `double` field, a 64-bit floating point number.
+     */
+    double(): number;
+    /**
+     * Read a `bytes` field, length-delimited arbitrary data.
+     */
+    bytes(): Uint8Array;
+    /**
+     * Read a `string` field, length-delimited data converted to UTF-8 text.
+     */
+    string(): string;
+}
+export interface IBinaryWriter {
+    /**
+     * Return all bytes written and reset this writer.
+     */
+    finish(): Uint8Array;
+    /**
+     * Start a new fork for length-delimited data like a message
+     * or a packed repeated field.
+     *
+     * Must be joined later with `join()`.
+     */
+    fork(): IBinaryWriter;
+    /**
+     * Join the last fork. Write its length and bytes, then
+     * return to the previous state.
+     */
+    join(): IBinaryWriter;
+    /**
+     * Writes a tag (field number and wire type).
+     *
+     * Equivalent to `uint32( (fieldNo << 3 | type) >>> 0 )`
+     *
+     * Generated code should compute the tag ahead of time and call `uint32()`.
+     */
+    tag(fieldNo: number, type: WireType): IBinaryWriter;
+    /**
+     * Write a chunk of raw bytes.
+     */
+    raw(chunk: Uint8Array): IBinaryWriter;
+    /**
+     * Write a `uint32` value, an unsigned 32 bit varint.
+     */
+    uint32(value: number): IBinaryWriter;
+    /**
+     * Write a `int32` value, a signed 32 bit varint.
+     */
+    int32(value: number): IBinaryWriter;
+    /**
+     * Write a `sint32` value, a signed, zigzag-encoded 32-bit varint.
+     */
+    sint32(value: number): IBinaryWriter;
+    /**
+     * Write a `int64` value, a signed 64-bit varint.
+     */
+    int64(value: string | number | bigint): IBinaryWriter;
+    /**
+     * Write a `uint64` value, an unsigned 64-bit varint.
+     */
+    uint64(value: string | number | bigint): IBinaryWriter;
+    /**
+     * Write a `sint64` value, a signed, zig-zag-encoded 64-bit varint.
+     */
+    sint64(value: string | number | bigint): IBinaryWriter;
+    /**
+     * Write a `fixed64` value, an unsigned, fixed-length 64 bit integer.
+     */
+    fixed64(value: string | number | bigint): IBinaryWriter;
+    /**
+     * Write a `fixed64` value, a signed, fixed-length 64-bit integer.
+     */
+    sfixed64(value: string | number | bigint): IBinaryWriter;
+    /**
+     * Write a `bool` value, a variant.
+     */
+    bool(value: boolean): IBinaryWriter;
+    /**
+     * Write a `fixed32` value, an unsigned, fixed-length 32-bit integer.
+     */
+    fixed32(value: number): IBinaryWriter;
+    /**
+     * Write a `sfixed32` value, a signed, fixed-length 32-bit integer.
+     */
+    sfixed32(value: number): IBinaryWriter;
+    /**
+     * Write a `float` value, 32-bit floating point number.
+     */
+    float(value: number): IBinaryWriter;
+    /**
+     * Write a `double` value, a 64-bit floating point number.
+     */
+    double(value: number): IBinaryWriter;
+    /**
+     * Write a `bytes` value, length-delimited arbitrary data.
+     */
+    bytes(value: Uint8Array): IBinaryWriter;
+    /**
+     * Write a `string` value, length-delimited data converted to UTF-8 text.
+     */
+    string(value: string): IBinaryWriter;
+}
+export declare class BinaryWriter implements IBinaryWriter {
+    /**
+     * We cannot allocate a buffer for the entire output
+     * because we don't know it's size.
+     *
+     * So we collect smaller chunks of known size and
+     * concat them later.
+     *
+     * Use `raw()` to push data to this array. It will flush
+     * `buf` first.
+     */
+    private chunks;
+    /**
+     * A growing buffer for byte values. If you don't know
+     * the size of the data you are writing, push to this
+     * array.
+     */
+    protected buf: number[];
+    /**
+     * Previous fork states.
+     */
+    private stack;
+    /**
+     * Text encoder instance to convert UTF-8 to bytes.
+     */
+    private readonly textEncoder;
+    constructor(textEncoder?: TextEncoderLike);
+    /**
+     * Return all bytes written and reset this writer.
+     */
+    finish(): Uint8Array;
+    /**
+     * Start a new fork for length-delimited data like a message
+     * or a packed repeated field.
+     *
+     * Must be joined later with `join()`.
+     */
+    fork(): IBinaryWriter;
+    /**
+     * Join the last fork. Write its length and bytes, then
+     * return to the previous state.
+     */
+    join(): IBinaryWriter;
+    /**
+     * Writes a tag (field number and wire type).
+     *
+     * Equivalent to `uint32( (fieldNo << 3 | type) >>> 0 )`.
+     *
+     * Generated code should compute the tag ahead of time and call `uint32()`.
+     */
+    tag(fieldNo: number, type: WireType): IBinaryWriter;
+    /**
+     * Write a chunk of raw bytes.
+     */
+    raw(chunk: Uint8Array): IBinaryWriter;
+    /**
+     * Write a `uint32` value, an unsigned 32 bit varint.
+     */
+    uint32(value: number): IBinaryWriter;
+    /**
+     * Write a `int32` value, a signed 32 bit varint.
+     */
+    int32(value: number): IBinaryWriter;
+    /**
+     * Write a `bool` value, a variant.
+     */
+    bool(value: boolean): IBinaryWriter;
+    /**
+     * Write a `bytes` value, length-delimited arbitrary data.
+     */
+    bytes(value: Uint8Array): IBinaryWriter;
+    /**
+     * Write a `string` value, length-delimited data converted to UTF-8 text.
+     */
+    string(value: string): IBinaryWriter;
+    /**
+     * Write a `float` value, 32-bit floating point number.
+     */
+    float(value: number): IBinaryWriter;
+    /**
+     * Write a `double` value, a 64-bit floating point number.
+     */
+    double(value: number): IBinaryWriter;
+    /**
+     * Write a `fixed32` value, an unsigned, fixed-length 32-bit integer.
+     */
+    fixed32(value: number): IBinaryWriter;
+    /**
+     * Write a `sfixed32` value, a signed, fixed-length 32-bit integer.
+     */
+    sfixed32(value: number): IBinaryWriter;
+    /**
+     * Write a `sint32` value, a signed, zigzag-encoded 32-bit varint.
+     */
+    sint32(value: number): IBinaryWriter;
+    /**
+     * Write a `fixed64` value, a signed, fixed-length 64-bit integer.
+     */
+    sfixed64(value: string | number | bigint): IBinaryWriter;
+    /**
+     * Write a `fixed64` value, an unsigned, fixed-length 64 bit integer.
+     */
+    fixed64(value: string | number | bigint): IBinaryWriter;
+    /**
+     * Write a `int64` value, a signed 64-bit varint.
+     */
+    int64(value: string | number | bigint): IBinaryWriter;
+    /**
+     * Write a `sint64` value, a signed, zig-zag-encoded 64-bit varint.
+     */
+    sint64(value: string | number | bigint): IBinaryWriter;
+    /**
+     * Write a `uint64` value, an unsigned 64-bit varint.
+     */
+    uint64(value: string | number | bigint): IBinaryWriter;
+}
+export declare class BinaryReader implements IBinaryReader {
+    /**
+     * Current position.
+     */
+    pos: number;
+    /**
+     * Number of bytes available in this reader.
+     */
+    readonly len: number;
+    private readonly buf;
+    private readonly view;
+    private readonly textDecoder;
+    constructor(buf: Uint8Array, textDecoder?: TextDecoderLike);
+    /**
+     * Reads a tag - field number and wire type.
+     */
+    tag(): [number, WireType];
+    /**
+     * Skip one element and return the skipped data.
+     *
+     * When skipping StartGroup, provide the tags field number to check for
+     * matching field number in the EndGroup tag.
+     */
+    skip(wireType: WireType, fieldNo?: number): Uint8Array;
+    protected varint64: () => [number, number];
+    /**
+     * Throws error if position in byte array is out of range.
+     */
+    protected assertBounds(): void;
+    /**
+     * Read a `uint32` field, an unsigned 32 bit varint.
+     */
+    uint32: () => number;
+    /**
+     * Read a `int32` field, a signed 32 bit varint.
+     */
+    int32(): number;
+    /**
+     * Read a `sint32` field, a signed, zigzag-encoded 32-bit varint.
+     */
+    sint32(): number;
+    /**
+     * Read a `int64` field, a signed 64-bit varint.
+     */
+    int64(): bigint | string;
+    /**
+     * Read a `uint64` field, an unsigned 64-bit varint.
+     */
+    uint64(): bigint | string;
+    /**
+     * Read a `sint64` field, a signed, zig-zag-encoded 64-bit varint.
+     */
+    sint64(): bigint | string;
+    /**
+     * Read a `bool` field, a variant.
+     */
+    bool(): boolean;
+    /**
+     * Read a `fixed32` field, an unsigned, fixed-length 32-bit integer.
+     */
+    fixed32(): number;
+    /**
+     * Read a `sfixed32` field, a signed, fixed-length 32-bit integer.
+     */
+    sfixed32(): number;
+    /**
+     * Read a `fixed64` field, an unsigned, fixed-length 64 bit integer.
+     */
+    fixed64(): bigint | string;
+    /**
+     * Read a `fixed64` field, a signed, fixed-length 64-bit integer.
+     */
+    sfixed64(): bigint | string;
+    /**
+     * Read a `float` field, 32-bit floating point number.
+     */
+    float(): number;
+    /**
+     * Read a `double` field, a 64-bit floating point number.
+     */
+    double(): number;
+    /**
+     * Read a `bytes` field, length-delimited arbitrary data.
+     */
+    bytes(): Uint8Array;
+    /**
+     * Read a `string` field, length-delimited data converted to UTF-8 text.
+     */
+    string(): string;
+}
+export {};