@img/sharp-libvips-dev 0.0.1

package/include/freetype2/freetype/ftmoderr.h

@@ -0,0 +1,204 @@
+/****************************************************************************
+ *
+ * ftmoderr.h
+ *
+ *   FreeType module error offsets (specification).
+ *
+ * Copyright (C) 2001-2023 by
+ * David Turner, Robert Wilhelm, and Werner Lemberg.
+ *
+ * This file is part of the FreeType project, and may only be used,
+ * modified, and distributed under the terms of the FreeType project
+ * license, LICENSE.TXT.  By continuing to use, modify, or distribute
+ * this file you indicate that you have read the license and
+ * understand and accept it fully.
+ *
+ */
+
+
+  /**************************************************************************
+   *
+   * This file is used to define the FreeType module error codes.
+   *
+   * If the macro `FT_CONFIG_OPTION_USE_MODULE_ERRORS` in `ftoption.h` is
+   * set, the lower byte of an error value identifies the error code as
+   * usual.  In addition, the higher byte identifies the module.  For
+   * example, the error `FT_Err_Invalid_File_Format` has value 0x0003, the
+   * error `TT_Err_Invalid_File_Format` has value 0x1303, the error
+   * `T1_Err_Invalid_File_Format` has value 0x1403, etc.
+   *
+   * Note that `FT_Err_Ok`, `TT_Err_Ok`, etc. are always equal to zero,
+   * including the high byte.
+   *
+   * If `FT_CONFIG_OPTION_USE_MODULE_ERRORS` isn't set, the higher byte of an
+   * error value is set to zero.
+   *
+   * To hide the various `XXX_Err_` prefixes in the source code, FreeType
+   * provides some macros in `fttypes.h`.
+   *
+   *   FT_ERR( err )
+   *
+   *     Add current error module prefix (as defined with the `FT_ERR_PREFIX`
+   *     macro) to `err`.  For example, in the BDF module the line
+   *
+   *     ```
+   *       error = FT_ERR( Invalid_Outline );
+   *     ```
+   *
+   *     expands to
+   *
+   *     ```
+   *       error = BDF_Err_Invalid_Outline;
+   *     ```
+   *
+   *     For simplicity, you can always use `FT_Err_Ok` directly instead of
+   *     `FT_ERR( Ok )`.
+   *
+   *   FT_ERR_EQ( errcode, err )
+   *   FT_ERR_NEQ( errcode, err )
+   *
+   *     Compare error code `errcode` with the error `err` for equality and
+   *     inequality, respectively.  Example:
+   *
+   *     ```
+   *       if ( FT_ERR_EQ( error, Invalid_Outline ) )
+   *         ...
+   *     ```
+   *
+   *     Using this macro you don't have to think about error prefixes.  Of
+   *     course, if module errors are not active, the above example is the
+   *     same as
+   *
+   *     ```
+   *       if ( error == FT_Err_Invalid_Outline )
+   *         ...
+   *     ```
+   *
+   *   FT_ERROR_BASE( errcode )
+   *   FT_ERROR_MODULE( errcode )
+   *
+   *     Get base error and module error code, respectively.
+   *
+   * It can also be used to create a module error message table easily with
+   * something like
+   *
+   * ```
+   *   #undef FTMODERR_H_
+   *   #define FT_MODERRDEF( e, v, s )  { FT_Mod_Err_ ## e, s },
+   *   #define FT_MODERR_START_LIST     {
+   *   #define FT_MODERR_END_LIST       { 0, 0 } };
+   *
+   *   const struct
+   *   {
+   *     int          mod_err_offset;
+   *     const char*  mod_err_msg
+   *   } ft_mod_errors[] =
+   *
+   *   #include <freetype/ftmoderr.h>
+   * ```
+   *
+   */
+
+
+#ifndef FTMODERR_H_
+#define FTMODERR_H_
+
+
+  /*******************************************************************/
+  /*******************************************************************/
+  /*****                                                         *****/
+  /*****                       SETUP MACROS                      *****/
+  /*****                                                         *****/
+  /*******************************************************************/
+  /*******************************************************************/
+
+
+#undef  FT_NEED_EXTERN_C
+
+#ifndef FT_MODERRDEF
+
+#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
+#define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = v,
+#else
+#define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = 0,
+#endif
+
+#define FT_MODERR_START_LIST  enum {
+#define FT_MODERR_END_LIST    FT_Mod_Err_Max };
+
+#ifdef __cplusplus
+#define FT_NEED_EXTERN_C
+  extern "C" {
+#endif
+
+#endif /* !FT_MODERRDEF */
+
+
+  /*******************************************************************/
+  /*******************************************************************/
+  /*****                                                         *****/
+  /*****               LIST MODULE ERROR BASES                   *****/
+  /*****                                                         *****/
+  /*******************************************************************/
+  /*******************************************************************/
+
+
+#ifdef FT_MODERR_START_LIST
+  FT_MODERR_START_LIST
+#endif
+
+
+  FT_MODERRDEF( Base,      0x000, "base module" )
+  FT_MODERRDEF( Autofit,   0x100, "autofitter module" )
+  FT_MODERRDEF( BDF,       0x200, "BDF module" )
+  FT_MODERRDEF( Bzip2,     0x300, "Bzip2 module" )
+  FT_MODERRDEF( Cache,     0x400, "cache module" )
+  FT_MODERRDEF( CFF,       0x500, "CFF module" )
+  FT_MODERRDEF( CID,       0x600, "CID module" )
+  FT_MODERRDEF( Gzip,      0x700, "Gzip module" )
+  FT_MODERRDEF( LZW,       0x800, "LZW module" )
+  FT_MODERRDEF( OTvalid,   0x900, "OpenType validation module" )
+  FT_MODERRDEF( PCF,       0xA00, "PCF module" )
+  FT_MODERRDEF( PFR,       0xB00, "PFR module" )
+  FT_MODERRDEF( PSaux,     0xC00, "PS auxiliary module" )
+  FT_MODERRDEF( PShinter,  0xD00, "PS hinter module" )
+  FT_MODERRDEF( PSnames,   0xE00, "PS names module" )
+  FT_MODERRDEF( Raster,    0xF00, "raster module" )
+  FT_MODERRDEF( SFNT,     0x1000, "SFNT module" )
+  FT_MODERRDEF( Smooth,   0x1100, "smooth raster module" )
+  FT_MODERRDEF( TrueType, 0x1200, "TrueType module" )
+  FT_MODERRDEF( Type1,    0x1300, "Type 1 module" )
+  FT_MODERRDEF( Type42,   0x1400, "Type 42 module" )
+  FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" )
+  FT_MODERRDEF( GXvalid,  0x1600, "GX validation module" )
+  FT_MODERRDEF( Sdf,      0x1700, "Signed distance field raster module" )
+
+
+#ifdef FT_MODERR_END_LIST
+  FT_MODERR_END_LIST
+#endif
+
+
+  /*******************************************************************/
+  /*******************************************************************/
+  /*****                                                         *****/
+  /*****                      CLEANUP                            *****/
+  /*****                                                         *****/
+  /*******************************************************************/
+  /*******************************************************************/
+
+
+#ifdef FT_NEED_EXTERN_C
+  }
+#endif
+
+#undef FT_MODERR_START_LIST
+#undef FT_MODERR_END_LIST
+#undef FT_MODERRDEF
+#undef FT_NEED_EXTERN_C
+
+
+#endif /* FTMODERR_H_ */
+
+
+/* END */

package/include/freetype2/freetype/ftotval.h

@@ -0,0 +1,206 @@
+/****************************************************************************
+ *
+ * ftotval.h
+ *
+ *   FreeType API for validating OpenType tables (specification).
+ *
+ * Copyright (C) 2004-2023 by
+ * David Turner, Robert Wilhelm, and Werner Lemberg.
+ *
+ * This file is part of the FreeType project, and may only be used,
+ * modified, and distributed under the terms of the FreeType project
+ * license, LICENSE.TXT.  By continuing to use, modify, or distribute
+ * this file you indicate that you have read the license and
+ * understand and accept it fully.
+ *
+ */
+
+
+/****************************************************************************
+ *
+ *
+ * Warning: This module might be moved to a different library in the
+ *          future to avoid a tight dependency between FreeType and the
+ *          OpenType specification.
+ *
+ *
+ */
+
+
+#ifndef FTOTVAL_H_
+#define FTOTVAL_H_
+
+#include <freetype/freetype.h>
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /**************************************************************************
+   *
+   * @section:
+   *   ot_validation
+   *
+   * @title:
+   *   OpenType Validation
+   *
+   * @abstract:
+   *   An API to validate OpenType tables.
+   *
+   * @description:
+   *   This section contains the declaration of functions to validate some
+   *   OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH).
+   *
+   * @order:
+   *   FT_OpenType_Validate
+   *   FT_OpenType_Free
+   *
+   *   FT_VALIDATE_OTXXX
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @enum:
+   *    FT_VALIDATE_OTXXX
+   *
+   * @description:
+   *    A list of bit-field constants used with @FT_OpenType_Validate to
+   *    indicate which OpenType tables should be validated.
+   *
+   * @values:
+   *    FT_VALIDATE_BASE ::
+   *      Validate BASE table.
+   *
+   *    FT_VALIDATE_GDEF ::
+   *      Validate GDEF table.
+   *
+   *    FT_VALIDATE_GPOS ::
+   *      Validate GPOS table.
+   *
+   *    FT_VALIDATE_GSUB ::
+   *      Validate GSUB table.
+   *
+   *    FT_VALIDATE_JSTF ::
+   *      Validate JSTF table.
+   *
+   *    FT_VALIDATE_MATH ::
+   *      Validate MATH table.
+   *
+   *    FT_VALIDATE_OT ::
+   *      Validate all OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH).
+   *
+   */
+#define FT_VALIDATE_BASE  0x0100
+#define FT_VALIDATE_GDEF  0x0200
+#define FT_VALIDATE_GPOS  0x0400
+#define FT_VALIDATE_GSUB  0x0800
+#define FT_VALIDATE_JSTF  0x1000
+#define FT_VALIDATE_MATH  0x2000
+
+#define FT_VALIDATE_OT  ( FT_VALIDATE_BASE | \
+                          FT_VALIDATE_GDEF | \
+                          FT_VALIDATE_GPOS | \
+                          FT_VALIDATE_GSUB | \
+                          FT_VALIDATE_JSTF | \
+                          FT_VALIDATE_MATH )
+
+
+  /**************************************************************************
+   *
+   * @function:
+   *    FT_OpenType_Validate
+   *
+   * @description:
+   *    Validate various OpenType tables to assure that all offsets and
+   *    indices are valid.  The idea is that a higher-level library that
+   *    actually does the text layout can access those tables without error
+   *    checking (which can be quite time consuming).
+   *
+   * @input:
+   *    face ::
+   *      A handle to the input face.
+   *
+   *    validation_flags ::
+   *      A bit field that specifies the tables to be validated.  See
+   *      @FT_VALIDATE_OTXXX for possible values.
+   *
+   * @output:
+   *    BASE_table ::
+   *      A pointer to the BASE table.
+   *
+   *    GDEF_table ::
+   *      A pointer to the GDEF table.
+   *
+   *    GPOS_table ::
+   *      A pointer to the GPOS table.
+   *
+   *    GSUB_table ::
+   *      A pointer to the GSUB table.
+   *
+   *    JSTF_table ::
+   *      A pointer to the JSTF table.
+   *
+   * @return:
+   *   FreeType error code.  0~means success.
+   *
+   * @note:
+   *   This function only works with OpenType fonts, returning an error
+   *   otherwise.
+   *
+   *   After use, the application should deallocate the five tables with
+   *   @FT_OpenType_Free.  A `NULL` value indicates that the table either
+   *   doesn't exist in the font, or the application hasn't asked for
+   *   validation.
+   */
+  FT_EXPORT( FT_Error )
+  FT_OpenType_Validate( FT_Face    face,
+                        FT_UInt    validation_flags,
+                        FT_Bytes  *BASE_table,
+                        FT_Bytes  *GDEF_table,
+                        FT_Bytes  *GPOS_table,
+                        FT_Bytes  *GSUB_table,
+                        FT_Bytes  *JSTF_table );
+
+
+  /**************************************************************************
+   *
+   * @function:
+   *    FT_OpenType_Free
+   *
+   * @description:
+   *    Free the buffer allocated by OpenType validator.
+   *
+   * @input:
+   *    face ::
+   *      A handle to the input face.
+   *
+   *    table ::
+   *      The pointer to the buffer that is allocated by
+   *      @FT_OpenType_Validate.
+   *
+   * @note:
+   *   This function must be used to free the buffer allocated by
+   *   @FT_OpenType_Validate only.
+   */
+  FT_EXPORT( void )
+  FT_OpenType_Free( FT_Face   face,
+                    FT_Bytes  table );
+
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* FTOTVAL_H_ */
+
+
+/* END */