@ikalogic/at1000 0.6.0 → 0.7.0

package/build/{com-XQjoTBdU.d.cts → com-Bkkgrsep.d.cts}

@@ -21,7 +21,7 @@ declare const i2cTransactionRead: v.IntersectSchema<[Omit<v.ObjectSchema<{
   readonly start: v.BooleanSchema<undefined>;
   readonly stop: v.BooleanSchema<undefined>;
   readonly nack_last_byte: v.BooleanSchema<undefined>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly address: v.NumberSchema<undefined>;
     readonly start: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
@@ -69,7 +69,7 @@ declare const i2cTransactionWrite: v.IntersectSchema<[Omit<v.ObjectSchema<{
   readonly start: v.BooleanSchema<undefined>;
   readonly stop: v.BooleanSchema<undefined>;
   readonly nack_last_byte: v.BooleanSchema<undefined>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly address: v.NumberSchema<undefined>;
     readonly start: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
@@ -132,7 +132,7 @@ declare const canConfigPatch: Omit<v.ObjectSchema<{
     readonly id: v.NumberSchema<undefined>;
     readonly mask: v.NumberSchema<undefined>;
   }, undefined>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.PicklistSchema<[5000, 10000, 20000, 31250, 33000, 40000, 50000, 80000, 83300, 95000, 100000, 125000, 200000, 250000, 500000, 1000000], undefined>, undefined>;
@@ -171,7 +171,7 @@ declare const canConfigPatch: Omit<v.ObjectSchema<{
       id: number;
       mask: number;
     } | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.ObjectIssue>;
+  }, v.BooleanIssue | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
@@ -193,7 +193,7 @@ declare const canConfigPatch: Omit<v.ObjectSchema<{
         mask: number;
       } | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.ObjectIssue;
+    readonly issue: v.BooleanIssue | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
 };
 type CanConfigPatch = v.InferOutput<typeof canConfigPatch>;
@@ -206,7 +206,7 @@ declare const canEnableConfig: Omit<Omit<v.ObjectSchema<{
     readonly id: v.NumberSchema<undefined>;
     readonly mask: v.NumberSchema<undefined>;
   }, undefined>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.PicklistSchema<[5000, 10000, 20000, 31250, 33000, 40000, 50000, 80000, 83300, 95000, 100000, 125000, 200000, 250000, 500000, 1000000], undefined>, undefined>;
@@ -245,7 +245,7 @@ declare const canEnableConfig: Omit<Omit<v.ObjectSchema<{
       id: number;
       mask: number;
     } | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.ObjectIssue>;
+  }, v.BooleanIssue | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
@@ -267,9 +267,9 @@ declare const canEnableConfig: Omit<Omit<v.ObjectSchema<{
         mask: number;
       } | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.ObjectIssue;
+    readonly issue: v.BooleanIssue | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
-}, "~types" | "~run" | "~standard" | "entries"> & {
+}, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: Omit<{
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.PicklistSchema<[5000, 10000, 20000, 31250, 33000, 40000, 50000, 80000, 83300, 95000, 100000, 125000, 200000, 250000, 500000, 1000000], undefined>, undefined>;
@@ -282,50 +282,50 @@ declare const canEnableConfig: Omit<Omit<v.ObjectSchema<{
   }, "enabled">;
   readonly "~standard": v.StandardProps<{
     baud_rate?: 5000 | 10000 | 20000 | 31250 | 33000 | 40000 | 50000 | 80000 | 83300 | 95000 | 100000 | 125000 | 200000 | 250000 | 500000 | 1000000 | undefined;
+    termination_resistors?: boolean | undefined;
     rx_filter?: {
       extended_id: boolean;
       id: number;
       mask: number;
     } | undefined;
-    termination_resistors?: boolean | undefined;
   }, {
     baud_rate?: 5000 | 10000 | 20000 | 31250 | 33000 | 40000 | 50000 | 80000 | 83300 | 95000 | 100000 | 125000 | 200000 | 250000 | 500000 | 1000000 | undefined;
+    termination_resistors?: boolean | undefined;
     rx_filter?: {
       extended_id: boolean;
       id: number;
       mask: number;
     } | undefined;
-    termination_resistors?: boolean | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     baud_rate?: 5000 | 10000 | 20000 | 31250 | 33000 | 40000 | 50000 | 80000 | 83300 | 95000 | 100000 | 125000 | 200000 | 250000 | 500000 | 1000000 | undefined;
+    termination_resistors?: boolean | undefined;
     rx_filter?: {
       extended_id: boolean;
       id: number;
       mask: number;
     } | undefined;
-    termination_resistors?: boolean | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.ObjectIssue>;
+  }, v.BooleanIssue | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       baud_rate?: 5000 | 10000 | 20000 | 31250 | 33000 | 40000 | 50000 | 80000 | 83300 | 95000 | 100000 | 125000 | 200000 | 250000 | 500000 | 1000000 | undefined;
+      termination_resistors?: boolean | undefined;
       rx_filter?: {
         extended_id: boolean;
         id: number;
         mask: number;
       } | undefined;
-      termination_resistors?: boolean | undefined;
     };
     readonly output: {
       baud_rate?: 5000 | 10000 | 20000 | 31250 | 33000 | 40000 | 50000 | 80000 | 83300 | 95000 | 100000 | 125000 | 200000 | 250000 | 500000 | 1000000 | undefined;
+      termination_resistors?: boolean | undefined;
       rx_filter?: {
         extended_id: boolean;
         id: number;
         mask: number;
       } | undefined;
-      termination_resistors?: boolean | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.ObjectIssue;
+    readonly issue: v.BooleanIssue | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
 };
 type CanEnableConfig = v.InferOutput<typeof canEnableConfig>;
@@ -347,7 +347,7 @@ declare const rs232ConfigPatch: Omit<v.ObjectSchema<{
   readonly data_bits: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 7, undefined>, v.MaxValueAction<number, 8, undefined>]>;
   readonly stop_bits: v.PicklistSchema<["1", "1.5", "2"], undefined>;
   readonly parity: v.PicklistSchema<["none", "odd", "even", "mark", "space"], undefined>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 50, undefined>, v.MaxValueAction<number, 1000000, undefined>]>, undefined>;
@@ -359,38 +359,38 @@ declare const rs232ConfigPatch: Omit<v.ObjectSchema<{
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }, {
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 50> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7>>;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 50> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
     readonly output: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 50> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 50> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
 };
 type Rs232ConfigPatch = v.InferOutput<typeof rs232ConfigPatch>;
@@ -400,7 +400,7 @@ declare const rs232EnableConfig: Omit<Omit<v.ObjectSchema<{
   readonly data_bits: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 7, undefined>, v.MaxValueAction<number, 8, undefined>]>;
   readonly stop_bits: v.PicklistSchema<["1", "1.5", "2"], undefined>;
   readonly parity: v.PicklistSchema<["none", "odd", "even", "mark", "space"], undefined>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 50, undefined>, v.MaxValueAction<number, 1000000, undefined>]>, undefined>;
@@ -412,40 +412,40 @@ declare const rs232EnableConfig: Omit<Omit<v.ObjectSchema<{
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }, {
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 50> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7>>;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 50> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
     readonly output: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 50> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 50> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
-}, "~types" | "~run" | "~standard" | "entries"> & {
+}, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: Omit<{
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 50, undefined>, v.MaxValueAction<number, 1000000, undefined>]>, undefined>;
@@ -456,34 +456,34 @@ declare const rs232EnableConfig: Omit<Omit<v.ObjectSchema<{
   readonly "~standard": v.StandardProps<{
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }, {
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
-  }, v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 50> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7>>;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+  }, v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 50> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       baud_rate?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
     readonly output: {
       baud_rate?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
-    readonly issue: v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 50> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7>;
+    readonly issue: v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 1000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 50> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
 };
 type Rs232EnableConfig = v.InferOutput<typeof rs232EnableConfig>;
@@ -503,7 +503,7 @@ declare const rs485ConfigPatch: Omit<v.ObjectSchema<{
   readonly stop_bits: v.PicklistSchema<["1", "1.5", "2"], undefined>;
   readonly parity: v.PicklistSchema<["none", "odd", "even", "mark", "space"], undefined>;
   readonly termination_resistors: v.BooleanSchema<undefined>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 20000000, undefined>]>, undefined>;
@@ -516,43 +516,43 @@ declare const rs485ConfigPatch: Omit<v.ObjectSchema<{
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     termination_resistors?: boolean | undefined;
   }, {
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     termination_resistors?: boolean | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     termination_resistors?: boolean | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 20000000>>;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 20000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
       termination_resistors?: boolean | undefined;
     };
     readonly output: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
       termination_resistors?: boolean | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 20000000>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 20000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
 };
 type Rs485ConfigPatch = v.InferOutput<typeof rs485ConfigPatch>;
@@ -563,7 +563,7 @@ declare const rs485EnableConfig: Omit<Omit<v.ObjectSchema<{
   readonly stop_bits: v.PicklistSchema<["1", "1.5", "2"], undefined>;
   readonly parity: v.PicklistSchema<["none", "odd", "even", "mark", "space"], undefined>;
   readonly termination_resistors: v.BooleanSchema<undefined>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 20000000, undefined>]>, undefined>;
@@ -576,45 +576,45 @@ declare const rs485EnableConfig: Omit<Omit<v.ObjectSchema<{
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     termination_resistors?: boolean | undefined;
   }, {
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     termination_resistors?: boolean | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     termination_resistors?: boolean | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 20000000>>;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 20000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
       termination_resistors?: boolean | undefined;
     };
     readonly output: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
       termination_resistors?: boolean | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 20000000>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 20000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
-}, "~types" | "~run" | "~standard" | "entries"> & {
+}, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: Omit<{
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 20000000, undefined>]>, undefined>;
@@ -625,40 +625,40 @@ declare const rs485EnableConfig: Omit<Omit<v.ObjectSchema<{
   }, "enabled">;
   readonly "~standard": v.StandardProps<{
     baud_rate?: number | undefined;
-    termination_resistors?: boolean | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+    termination_resistors?: boolean | undefined;
   }, {
     baud_rate?: number | undefined;
-    termination_resistors?: boolean | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+    termination_resistors?: boolean | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     baud_rate?: number | undefined;
-    termination_resistors?: boolean | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 20000000>>;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+    termination_resistors?: boolean | undefined;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 20000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       baud_rate?: number | undefined;
-      termination_resistors?: boolean | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+      termination_resistors?: boolean | undefined;
     };
     readonly output: {
       baud_rate?: number | undefined;
-      termination_resistors?: boolean | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+      termination_resistors?: boolean | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 20000000>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 20000000> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
 };
 type Rs485EnableConfig = v.InferOutput<typeof rs485EnableConfig>;
@@ -674,7 +674,7 @@ declare const spiConfigPatch: Omit<v.ObjectSchema<{
   readonly baud_rate: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 10000000, undefined>]>;
   readonly vcc: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 1.6, undefined>, v.MaxValueAction<number, 5, undefined>]>;
   readonly mode: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 0, undefined>, v.MaxValueAction<number, 3, undefined>]>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 10000000, undefined>]>, undefined>;
@@ -697,7 +697,7 @@ declare const spiConfigPatch: Omit<v.ObjectSchema<{
     baud_rate?: number | undefined;
     vcc?: number | undefined;
     mode?: number | undefined;
-  }, v.BooleanIssue | v.NumberIssue | v.MinValueIssue<number, 0> | v.ObjectIssue | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 3>>;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 3> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 0> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
@@ -711,7 +711,7 @@ declare const spiConfigPatch: Omit<v.ObjectSchema<{
       vcc?: number | undefined;
       mode?: number | undefined;
     };
-    readonly issue: v.BooleanIssue | v.NumberIssue | v.MinValueIssue<number, 0> | v.ObjectIssue | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 3>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 3> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 0> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue;
   } | undefined;
 };
 type SpiConfigPatch = v.InferOutput<typeof spiConfigPatch>;
@@ -720,7 +720,7 @@ declare const spiEnableConfig: Omit<Omit<v.ObjectSchema<{
   readonly baud_rate: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 10000000, undefined>]>;
   readonly vcc: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 1.6, undefined>, v.MaxValueAction<number, 5, undefined>]>;
   readonly mode: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 0, undefined>, v.MaxValueAction<number, 3, undefined>]>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 10000000, undefined>]>, undefined>;
@@ -743,7 +743,7 @@ declare const spiEnableConfig: Omit<Omit<v.ObjectSchema<{
     baud_rate?: number | undefined;
     vcc?: number | undefined;
     mode?: number | undefined;
-  }, v.BooleanIssue | v.NumberIssue | v.MinValueIssue<number, 0> | v.ObjectIssue | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 3>>;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 3> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 0> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
@@ -757,9 +757,9 @@ declare const spiEnableConfig: Omit<Omit<v.ObjectSchema<{
       vcc?: number | undefined;
       mode?: number | undefined;
     };
-    readonly issue: v.BooleanIssue | v.NumberIssue | v.MinValueIssue<number, 0> | v.ObjectIssue | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 3>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 3> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 0> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue;
   } | undefined;
-}, "~types" | "~run" | "~standard" | "entries"> & {
+}, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: Omit<{
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 10000000, undefined>]>, undefined>;
@@ -779,7 +779,7 @@ declare const spiEnableConfig: Omit<Omit<v.ObjectSchema<{
     baud_rate?: number | undefined;
     vcc?: number | undefined;
     mode?: number | undefined;
-  }, v.NumberIssue | v.MinValueIssue<number, 0> | v.ObjectIssue | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 3>>;
+  }, v.MaxValueIssue<number, 3> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 0> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue>;
   readonly "~types"?: {
     readonly input: {
       baud_rate?: number | undefined;
@@ -791,7 +791,7 @@ declare const spiEnableConfig: Omit<Omit<v.ObjectSchema<{
       vcc?: number | undefined;
       mode?: number | undefined;
     };
-    readonly issue: v.NumberIssue | v.MinValueIssue<number, 0> | v.ObjectIssue | v.MinValueIssue<number, 300> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 3>;
+    readonly issue: v.MaxValueIssue<number, 3> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 10000000> | v.MinValueIssue<number, 0> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue;
   } | undefined;
 };
 type SpiEnableConfig = v.InferOutput<typeof spiEnableConfig>;
@@ -805,7 +805,7 @@ declare const i2cConfigPatch: Omit<v.ObjectSchema<{
   readonly enabled: v.BooleanSchema<undefined>;
   readonly baud_rate: v.PicklistSchema<[100000, 400000, 1000000], undefined>;
   readonly vcc: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 1.6, undefined>, v.MaxValueAction<number, 5, undefined>]>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.PicklistSchema<[100000, 400000, 1000000], undefined>, undefined>;
@@ -813,30 +813,30 @@ declare const i2cConfigPatch: Omit<v.ObjectSchema<{
   };
   readonly "~standard": v.StandardProps<{
     enabled?: boolean | undefined;
-    baud_rate?: 100000 | 1000000 | 400000 | undefined;
+    baud_rate?: 100000 | 400000 | 1000000 | undefined;
     vcc?: number | undefined;
   }, {
     enabled?: boolean | undefined;
-    baud_rate?: 100000 | 1000000 | 400000 | undefined;
+    baud_rate?: 100000 | 400000 | 1000000 | undefined;
     vcc?: number | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     enabled?: boolean | undefined;
-    baud_rate?: 100000 | 1000000 | 400000 | undefined;
+    baud_rate?: 100000 | 400000 | 1000000 | undefined;
     vcc?: number | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.ObjectIssue | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5>>;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 5> | v.MinValueIssue<number, 1.6> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
-      baud_rate?: 100000 | 1000000 | 400000 | undefined;
+      baud_rate?: 100000 | 400000 | 1000000 | undefined;
       vcc?: number | undefined;
     };
     readonly output: {
       enabled?: boolean | undefined;
-      baud_rate?: 100000 | 1000000 | 400000 | undefined;
+      baud_rate?: 100000 | 400000 | 1000000 | undefined;
       vcc?: number | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.ObjectIssue | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 5> | v.MinValueIssue<number, 1.6> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
 };
 type I2cConfigPatch = v.InferOutput<typeof i2cConfigPatch>;
@@ -844,7 +844,7 @@ declare const i2cEnableConfig: Omit<Omit<v.ObjectSchema<{
   readonly enabled: v.BooleanSchema<undefined>;
   readonly baud_rate: v.PicklistSchema<[100000, 400000, 1000000], undefined>;
   readonly vcc: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 1.6, undefined>, v.MaxValueAction<number, 5, undefined>]>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.PicklistSchema<[100000, 400000, 1000000], undefined>, undefined>;
@@ -852,58 +852,58 @@ declare const i2cEnableConfig: Omit<Omit<v.ObjectSchema<{
   };
   readonly "~standard": v.StandardProps<{
     enabled?: boolean | undefined;
-    baud_rate?: 100000 | 1000000 | 400000 | undefined;
+    baud_rate?: 100000 | 400000 | 1000000 | undefined;
     vcc?: number | undefined;
   }, {
     enabled?: boolean | undefined;
-    baud_rate?: 100000 | 1000000 | 400000 | undefined;
+    baud_rate?: 100000 | 400000 | 1000000 | undefined;
     vcc?: number | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     enabled?: boolean | undefined;
-    baud_rate?: 100000 | 1000000 | 400000 | undefined;
+    baud_rate?: 100000 | 400000 | 1000000 | undefined;
     vcc?: number | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.ObjectIssue | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5>>;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 5> | v.MinValueIssue<number, 1.6> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
-      baud_rate?: 100000 | 1000000 | 400000 | undefined;
+      baud_rate?: 100000 | 400000 | 1000000 | undefined;
       vcc?: number | undefined;
     };
     readonly output: {
       enabled?: boolean | undefined;
-      baud_rate?: 100000 | 1000000 | 400000 | undefined;
+      baud_rate?: 100000 | 400000 | 1000000 | undefined;
       vcc?: number | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.ObjectIssue | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 5> | v.MinValueIssue<number, 1.6> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
-}, "~types" | "~run" | "~standard" | "entries"> & {
+}, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: Omit<{
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.PicklistSchema<[100000, 400000, 1000000], undefined>, undefined>;
     readonly vcc: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 1.6, undefined>, v.MaxValueAction<number, 5, undefined>]>, undefined>;
   }, "enabled">;
   readonly "~standard": v.StandardProps<{
-    baud_rate?: 100000 | 1000000 | 400000 | undefined;
+    baud_rate?: 100000 | 400000 | 1000000 | undefined;
     vcc?: number | undefined;
   }, {
-    baud_rate?: 100000 | 1000000 | 400000 | undefined;
+    baud_rate?: 100000 | 400000 | 1000000 | undefined;
     vcc?: number | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
-    baud_rate?: 100000 | 1000000 | 400000 | undefined;
+    baud_rate?: 100000 | 400000 | 1000000 | undefined;
     vcc?: number | undefined;
-  }, v.PicklistIssue | v.NumberIssue | v.ObjectIssue | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5>>;
+  }, v.MaxValueIssue<number, 5> | v.MinValueIssue<number, 1.6> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
-      baud_rate?: 100000 | 1000000 | 400000 | undefined;
+      baud_rate?: 100000 | 400000 | 1000000 | undefined;
       vcc?: number | undefined;
     };
     readonly output: {
-      baud_rate?: 100000 | 1000000 | 400000 | undefined;
+      baud_rate?: 100000 | 400000 | 1000000 | undefined;
       vcc?: number | undefined;
     };
-    readonly issue: v.PicklistIssue | v.NumberIssue | v.ObjectIssue | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5>;
+    readonly issue: v.MaxValueIssue<number, 5> | v.MinValueIssue<number, 1.6> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
 };
 type I2cEnableConfig = v.InferOutput<typeof i2cEnableConfig>;
@@ -923,7 +923,7 @@ declare const uartConfigPatch: Omit<v.ObjectSchema<{
   readonly data_bits: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 7, undefined>, v.MaxValueAction<number, 8, undefined>]>;
   readonly stop_bits: v.PicklistSchema<["1", "1.5", "2"], undefined>;
   readonly parity: v.PicklistSchema<["none", "odd", "even", "mark", "space"], undefined>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 12000000, undefined>]>, undefined>;
@@ -937,42 +937,42 @@ declare const uartConfigPatch: Omit<v.ObjectSchema<{
     baud_rate?: number | undefined;
     vcc?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }, {
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     vcc?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     vcc?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 12000000>>;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 12000000> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       vcc?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
     readonly output: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       vcc?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 12000000>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 12000000> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
 };
 type UartConfigPatch = v.InferOutput<typeof uartConfigPatch>;
@@ -983,7 +983,7 @@ declare const uartEnableConfig: Omit<Omit<v.ObjectSchema<{
   readonly data_bits: v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 7, undefined>, v.MaxValueAction<number, 8, undefined>]>;
   readonly stop_bits: v.PicklistSchema<["1", "1.5", "2"], undefined>;
   readonly parity: v.PicklistSchema<["none", "odd", "even", "mark", "space"], undefined>;
-}, undefined>, "~types" | "~run" | "~standard" | "entries"> & {
+}, undefined>, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: {
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 12000000, undefined>]>, undefined>;
@@ -997,44 +997,44 @@ declare const uartEnableConfig: Omit<Omit<v.ObjectSchema<{
     baud_rate?: number | undefined;
     vcc?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }, {
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     vcc?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     enabled?: boolean | undefined;
     baud_rate?: number | undefined;
     vcc?: number | undefined;
     data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
-  }, v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 12000000>>;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+  }, v.BooleanIssue | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 12000000> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       vcc?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
     readonly output: {
       enabled?: boolean | undefined;
       baud_rate?: number | undefined;
       vcc?: number | undefined;
       data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
-    readonly issue: v.BooleanIssue | v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 12000000>;
+    readonly issue: v.BooleanIssue | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 12000000> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
-}, "~types" | "~run" | "~standard" | "entries"> & {
+}, "entries" | "~run" | "~standard" | "~types"> & {
   readonly entries: Omit<{
     readonly enabled: v.OptionalSchema<v.BooleanSchema<undefined>, undefined>;
     readonly baud_rate: v.OptionalSchema<v.SchemaWithPipe<readonly [v.NumberSchema<undefined>, v.MinValueAction<number, 300, undefined>, v.MaxValueAction<number, 12000000, undefined>]>, undefined>;
@@ -1045,40 +1045,40 @@ declare const uartEnableConfig: Omit<Omit<v.ObjectSchema<{
   }, "enabled">;
   readonly "~standard": v.StandardProps<{
     baud_rate?: number | undefined;
-    data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
     vcc?: number | undefined;
+    data_bits?: number | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }, {
     baud_rate?: number | undefined;
-    data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
     vcc?: number | undefined;
+    data_bits?: number | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
   }>;
   readonly "~run": (dataset: v.UnknownDataset, config: v.Config<v.BaseIssue<unknown>>) => v.OutputDataset<{
     baud_rate?: number | undefined;
-    data_bits?: number | undefined;
-    stop_bits?: "1" | "2" | "1.5" | undefined;
-    parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
     vcc?: number | undefined;
-  }, v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 12000000>>;
+    data_bits?: number | undefined;
+    stop_bits?: "1" | "1.5" | "2" | undefined;
+    parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
+  }, v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 12000000> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue>;
   readonly "~types"?: {
     readonly input: {
       baud_rate?: number | undefined;
-      data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
       vcc?: number | undefined;
+      data_bits?: number | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
     readonly output: {
       baud_rate?: number | undefined;
-      data_bits?: number | undefined;
-      stop_bits?: "1" | "2" | "1.5" | undefined;
-      parity?: "none" | "odd" | "even" | "mark" | "space" | undefined;
       vcc?: number | undefined;
+      data_bits?: number | undefined;
+      stop_bits?: "1" | "1.5" | "2" | undefined;
+      parity?: "even" | "mark" | "none" | "odd" | "space" | undefined;
     };
-    readonly issue: v.PicklistIssue | v.NumberIssue | v.MaxValueIssue<number, 8> | v.ObjectIssue | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.MinValueIssue<number, 1.6> | v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 12000000>;
+    readonly issue: v.MaxValueIssue<number, 5> | v.MaxValueIssue<number, 8> | v.MaxValueIssue<number, 12000000> | v.MinValueIssue<number, 1.6> | v.MinValueIssue<number, 7> | v.MinValueIssue<number, 300> | v.NumberIssue | v.ObjectIssue | v.PicklistIssue;
   } | undefined;
 };
 type UartEnableConfig = v.InferOutput<typeof uartEnableConfig>;
@@ -1433,4 +1433,4 @@ declare class Uart {
 }
 //#endregion
 export { UartConfig as A, rs485Config as B, SerialParity as C, SpiConfigPatch as D, SpiConfig as E, UsbState as F, uartConfig as H, canConfig as I, canFrame as L, UartEnableConfig as M, UsbDevice as N, SpiEnableConfig as O, UsbInterface as P, i2cConfig as R, SerialDataInput as S, Spi as T, spiConfig as V, Rs485 as _, CanFrame as a, Rs485EnableConfig as b, ComUsb as c, I2cConfigPatch as d, I2cEnableConfig as f, Rs232EnableConfig as g, Rs232ConfigPatch as h, CanEnableConfig as i, UartConfigPatch as j, Uart as k, I2c as l, Rs232Config as m, CanConfig as n, CanFrameInput as o, Rs232 as p, CanConfigPatch as r, ComApi as s, Can as t, I2cConfig as u, Rs485Config as v, SerialStopBits as w, SerialData as x, Rs485ConfigPatch as y, rs232Config as z };
-//# sourceMappingURL=com-XQjoTBdU.d.cts.map
+//# sourceMappingURL=com-Bkkgrsep.d.cts.map